diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-26 12:57:41 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-26 12:57:41 -0700 |
commit | 0082c16e3a6d87c7b156ccf21f5e6c448b102809 (patch) | |
tree | 29e12a84578b23d403ea59021fe311ee38479407 | |
parent | 1f03bf06e4e3b8ed9a69e7fc4cdb1be4c6c6c819 (diff) | |
parent | 8ceffa7c4a4c378d8e371fe2f444656e75390b34 (diff) | |
download | op-kernel-dev-0082c16e3a6d87c7b156ccf21f5e6c448b102809.zip op-kernel-dev-0082c16e3a6d87c7b156ccf21f5e6c448b102809.tar.gz |
Merge tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc
Pull spi updates from Mark Brown:
"Since Grant is even more specacularly busy than usual for the time
being I've been collecting SPI patches for him for this release -
probably things will revert back to Grant before the next release.
There's nothing too exciting here, mostly it's simple driver specific
stuff:
- Add spi: to the modaliases of SPI devices to provide namespacing.
- A driver for AD-FMCOMMS1-EBZ.
- DT binding for Orion.
- Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.
There may be a few more fixes I've missed, people keep sending me new
things."
* tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
spi/orion: remove uneeded spi_info
spi/bcm63xx: fix clock configuration selection
spi/orion: add device tree binding
spi/omap2: mark omap2_mcspi_master_setup as __devinit
spi: omap2-mcspi: Fix the below warning
spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver
spi/imx: use gpio_is_valid to determine if a gpio is valid
spi/imx: remove redundant config.speed_hz setting
spi/gpio: start with CS non-active
spi: tegra: use dmaengine based dma driver
spi/pl022: cleanup pl022 header documentation
spi/pl022: enable runtime PM
spi/pl022: delete DB5500 support
spi/pl022: disable port when unused
spi: Add "spi:" prefix to modalias attribute of spi devices
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-orion.txt | 19 | ||||
-rw-r--r-- | drivers/spi/Kconfig | 9 | ||||
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/spi-bcm63xx.c | 2 | ||||
-rw-r--r-- | drivers/spi/spi-gpio.c | 3 | ||||
-rw-r--r-- | drivers/spi/spi-imx.c | 14 | ||||
-rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 8 | ||||
-rw-r--r-- | drivers/spi/spi-orion.c | 22 | ||||
-rw-r--r-- | drivers/spi/spi-pl022.c | 23 | ||||
-rw-r--r-- | drivers/spi/spi-tegra.c | 89 | ||||
-rw-r--r-- | drivers/spi/spi-xcomm.c | 276 | ||||
-rw-r--r-- | drivers/spi/spi.c | 2 | ||||
-rw-r--r-- | include/linux/amba/pl022.h | 9 |
13 files changed, 430 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt new file mode 100644 index 0000000..a3ff50f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -0,0 +1,19 @@ +Marvell Orion SPI device + +Required properties: +- compatible : should be "marvell,orion-spi". +- reg : offset and length of the register set for the device +- cell-index : Which of multiple SPI controllers is this. +Optional properties: +- interrupts : Is currently not used. + +Example: + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + interrupts = <23>; + status = "disabled"; + }; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index cb90bc6..4cde4fb 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -357,7 +357,7 @@ config SPI_STMP3XXX config SPI_TEGRA tristate "Nvidia Tegra SPI controller" - depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA + depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA) help SPI driver for NVidia Tegra SoCs @@ -384,6 +384,13 @@ config SPI_TXX9 help SPI driver for Toshiba TXx9 MIPS SoCs +config SPI_XCOMM + tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver" + depends on I2C + help + Support for the SPI-I2C bridge found on the Analog Devices + AD-FMCOMMS1-EBZ board. + config SPI_XILINX tristate "Xilinx SPI controller common module" depends on HAS_IOMEM && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 9d75d21..273f50d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -61,5 +61,6 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_TXX9) += spi-txx9.o +obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 7491971..6e25ef1 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -129,7 +129,7 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi, /* Find the closest clock configuration */ for (i = 0; i < SPI_CLK_MASK; i++) { - if (hz <= bcm63xx_spi_freq_table[i][0]) { + if (hz >= bcm63xx_spi_freq_table[i][0]) { clk_cfg = bcm63xx_spi_freq_table[i][1]; break; } diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 0094c645..0b56cfc 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -235,7 +235,8 @@ static int spi_gpio_setup(struct spi_device *spi) status = gpio_request(cs, dev_name(&spi->dev)); if (status) return status; - status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH); + status = gpio_direction_output(cs, + !(spi->mode & SPI_CS_HIGH)); } } if (!status) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 47877d6..e834ff8 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -626,7 +626,7 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active) int active = is_active != BITBANG_CS_INACTIVE; int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); - if (gpio < 0) + if (!gpio_is_valid(gpio)) return; gpio_set_value(gpio, dev_is_lowactive ^ active); @@ -688,8 +688,6 @@ static int spi_imx_setupxfer(struct spi_device *spi, config.speed_hz = spi->max_speed_hz; if (!config.bpw) config.bpw = spi->bits_per_word; - if (!config.speed_hz) - config.speed_hz = spi->max_speed_hz; /* Initialize the functions for transfer */ if (config.bpw <= 8) { @@ -738,7 +736,7 @@ static int spi_imx_setup(struct spi_device *spi) dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); - if (gpio >= 0) + if (gpio_is_valid(gpio)) gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); spi_imx_chipselect(spi, BITBANG_CS_INACTIVE); @@ -791,11 +789,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) for (i = 0; i < master->num_chipselect; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); - if (cs_gpio < 0 && mxc_platform_info) + if (!gpio_is_valid(cs_gpio) && mxc_platform_info) cs_gpio = mxc_platform_info->chipselect[i]; spi_imx->chipselect[i] = cs_gpio; - if (cs_gpio < 0) + if (!gpio_is_valid(cs_gpio)) continue; ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); @@ -897,7 +895,7 @@ out_release_mem: release_mem_region(res->start, resource_size(res)); out_gpio_free: while (--i >= 0) { - if (spi_imx->chipselect[i] >= 0) + if (gpio_is_valid(spi_imx->chipselect[i])) gpio_free(spi_imx->chipselect[i]); } spi_master_put(master); @@ -922,7 +920,7 @@ static int __devexit spi_imx_remove(struct platform_device *pdev) iounmap(spi_imx->base); for (i = 0; i < master->num_chipselect; i++) - if (spi_imx->chipselect[i] >= 0) + if (gpio_is_valid(spi_imx->chipselect[i])) gpio_free(spi_imx->chipselect[i]); spi_master_put(master); diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 0c73dd4..7d46b15 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -388,7 +388,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); - dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE); + dma_unmap_single(mcspi->dev, xfer->tx_dma, count, + DMA_TO_DEVICE); /* for TX_ONLY mode, be sure all words have shifted out */ if (rx == NULL) { @@ -403,7 +404,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (rx != NULL) { wait_for_completion(&mcspi_dma->dma_rx_completion); - dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); + dma_unmap_single(mcspi->dev, xfer->rx_dma, count, + DMA_FROM_DEVICE); omap2_mcspi_set_enable(spi, 0); if (l & OMAP2_MCSPI_CHCONF_TURBO) { @@ -1032,7 +1034,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, return 0; } -static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) +static int __devinit omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) { struct spi_master *master = mcspi->master; struct omap2_mcspi_regs *ctx = &mcspi->ctx; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index dfd04e9..9b0cadd 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/clk.h> #include <asm/unaligned.h> @@ -45,7 +46,6 @@ struct orion_spi { void __iomem *base; unsigned int max_speed; unsigned int min_speed; - struct orion_spi_info *spi_info; struct clk *clk; }; @@ -450,11 +450,10 @@ static int __init orion_spi_probe(struct platform_device *pdev) struct spi_master *master; struct orion_spi *spi; struct resource *r; - struct orion_spi_info *spi_info; unsigned long tclk_hz; int status = 0; - - spi_info = pdev->dev.platform_data; + const u32 *iprop; + int size; master = spi_alloc_master(&pdev->dev, sizeof *spi); if (master == NULL) { @@ -464,6 +463,12 @@ static int __init orion_spi_probe(struct platform_device *pdev) if (pdev->id != -1) master->bus_num = pdev->id; + if (pdev->dev.of_node) { + iprop = of_get_property(pdev->dev.of_node, "cell-index", + &size); + if (iprop && size == sizeof(*iprop)) + master->bus_num = *iprop; + } /* we support only mode 0, and no options */ master->mode_bits = 0; @@ -476,7 +481,6 @@ static int __init orion_spi_probe(struct platform_device *pdev) spi = spi_master_get_devdata(master); spi->master = master; - spi->spi_info = spi_info; spi->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(spi->clk)) { @@ -511,6 +515,7 @@ static int __init orion_spi_probe(struct platform_device *pdev) if (orion_spi_reset(spi) < 0) goto out_rel_mem; + master->dev.of_node = pdev->dev.of_node; status = spi_register_master(master); if (status < 0) goto out_rel_mem; @@ -552,10 +557,17 @@ static int __exit orion_spi_remove(struct platform_device *pdev) MODULE_ALIAS("platform:" DRIVER_NAME); +static const struct of_device_id orion_spi_of_match_table[] __devinitdata = { + { .compatible = "marvell,orion-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); + static struct platform_driver orion_spi_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(orion_spi_of_match_table), }, .remove = __exit_p(orion_spi_remove), }; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 400ae21..aab518e 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -489,6 +489,11 @@ static void giveback(struct pl022 *pl022) pl022->cur_transfer = NULL; pl022->cur_chip = NULL; spi_finalize_current_message(pl022->master); + + /* disable the SPI/SSP operation */ + writew((readw(SSP_CR1(pl022->virtbase)) & + (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); + } /** @@ -2048,6 +2053,9 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); + pm_runtime_enable(dev); + pm_runtime_resume(dev); + pl022->clk = clk_get(&adev->dev, NULL); if (IS_ERR(pl022->clk)) { status = PTR_ERR(pl022->clk); @@ -2158,6 +2166,7 @@ pl022_remove(struct amba_device *adev) clk_disable(pl022->clk); clk_unprepare(pl022->clk); clk_put(pl022->clk); + pm_runtime_disable(&adev->dev); iounmap(pl022->virtbase); amba_release_regions(adev); tasklet_disable(&pl022->pump_transfers); @@ -2251,15 +2260,6 @@ static struct vendor_data vendor_st_pl023 = { .loopback = false, }; -static struct vendor_data vendor_db5500_pl023 = { - .fifodepth = 32, - .max_bpw = 32, - .unidir = false, - .extended_cr = true, - .pl023 = true, - .loopback = true, -}; - static struct amba_id pl022_ids[] = { { /* @@ -2291,11 +2291,6 @@ static struct amba_id pl022_ids[] = { .mask = 0xffffffff, .data = &vendor_st_pl023, }, - { - .id = 0x10080023, - .mask = 0xffffffff, - .data = &vendor_db5500_pl023, - }, { 0, 0 }, }; diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c index 7f99ff3..ef52c1c 100644 --- a/drivers/spi/spi-tegra.c +++ b/drivers/spi/spi-tegra.c @@ -30,6 +30,7 @@ #include <linux/delay.h> #include <linux/spi/spi.h> +#include <linux/dmaengine.h> #include <mach/dma.h> @@ -162,12 +163,23 @@ struct spi_tegra_data { * require transfers to be 4 byte aligned we need a bounce buffer * for the generic case. */ + int dma_req_len; +#if defined(CONFIG_TEGRA_SYSTEM_DMA) struct tegra_dma_req rx_dma_req; struct tegra_dma_channel *rx_dma; +#else + struct dma_chan *rx_dma; + struct dma_slave_config sconfig; + struct dma_async_tx_descriptor *rx_dma_desc; + dma_cookie_t rx_cookie; +#endif u32 *rx_bb; dma_addr_t rx_bb_phys; }; +#if !defined(CONFIG_TEGRA_SYSTEM_DMA) +static void tegra_spi_rx_dma_complete(void *args); +#endif static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi, unsigned long reg) @@ -190,10 +202,24 @@ static void spi_tegra_go(struct spi_tegra_data *tspi) val = spi_tegra_readl(tspi, SLINK_DMA_CTL); val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN; - val |= SLINK_DMA_BLOCK_SIZE(tspi->rx_dma_req.size / 4 - 1); + val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1); spi_tegra_writel(tspi, val, SLINK_DMA_CTL); - +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + tspi->rx_dma_req.size = tspi->dma_req_len; tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req); +#else + tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma, + tspi->rx_bb_phys, tspi->dma_req_len, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!tspi->rx_dma_desc) { + dev_err(&tspi->pdev->dev, "dmaengine slave prep failed\n"); + return; + } + tspi->rx_dma_desc->callback = tegra_spi_rx_dma_complete; + tspi->rx_dma_desc->callback_param = tspi; + tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc); + dma_async_issue_pending(tspi->rx_dma); +#endif val |= SLINK_DMA_EN; spi_tegra_writel(tspi, val, SLINK_DMA_CTL); @@ -221,7 +247,7 @@ static unsigned spi_tegra_fill_tx_fifo(struct spi_tegra_data *tspi, spi_tegra_writel(tspi, val, SLINK_TX_FIFO); } - tspi->rx_dma_req.size = len / tspi->cur_bytes_per_word * 4; + tspi->dma_req_len = len / tspi->cur_bytes_per_word * 4; return len; } @@ -318,9 +344,8 @@ static void spi_tegra_start_message(struct spi_device *spi, spi_tegra_start_transfer(spi, t); } -static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) +static void handle_spi_rx_dma_complete(struct spi_tegra_data *tspi) { - struct spi_tegra_data *tspi = req->dev; unsigned long flags; struct spi_message *m; struct spi_device *spi; @@ -380,6 +405,19 @@ static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) spin_unlock_irqrestore(&tspi->lock, flags); } +#if defined(CONFIG_TEGRA_SYSTEM_DMA) +static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) +{ + struct spi_tegra_data *tspi = req->dev; + handle_spi_rx_dma_complete(tspi); +} +#else +static void tegra_spi_rx_dma_complete(void *args) +{ + struct spi_tegra_data *tspi = args; + handle_spi_rx_dma_complete(tspi); +} +#endif static int spi_tegra_setup(struct spi_device *spi) { @@ -471,6 +509,9 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) struct spi_tegra_data *tspi; struct resource *r; int ret; +#if !defined(CONFIG_TEGRA_SYSTEM_DMA) + dma_cap_mask_t mask; +#endif master = spi_alloc_master(&pdev->dev, sizeof *tspi); if (master == NULL) { @@ -522,12 +563,24 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) INIT_LIST_HEAD(&tspi->queue); +#if defined(CONFIG_TEGRA_SYSTEM_DMA) tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT); if (!tspi->rx_dma) { dev_err(&pdev->dev, "can not allocate rx dma channel\n"); ret = -ENODEV; goto err3; } +#else + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + tspi->rx_dma = dma_request_channel(mask, NULL, NULL); + if (!tspi->rx_dma) { + dev_err(&pdev->dev, "can not allocate rx dma channel\n"); + ret = -ENODEV; + goto err3; + } + +#endif tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN, &tspi->rx_bb_phys, GFP_KERNEL); @@ -537,6 +590,7 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) goto err4; } +#if defined(CONFIG_TEGRA_SYSTEM_DMA) tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete; tspi->rx_dma_req.to_memory = 1; tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys; @@ -546,6 +600,23 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) tspi->rx_dma_req.source_wrap = 4; tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id]; tspi->rx_dma_req.dev = tspi; +#else + /* Dmaengine Dma slave config */ + tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO; + tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO; + tspi->sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + tspi->sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + tspi->sconfig.slave_id = spi_tegra_req_sels[pdev->id]; + tspi->sconfig.src_maxburst = 1; + tspi->sconfig.dst_maxburst = 1; + ret = dmaengine_device_control(tspi->rx_dma, + DMA_SLAVE_CONFIG, (unsigned long) &tspi->sconfig); + if (ret < 0) { + dev_err(&pdev->dev, "can not do slave configure for dma %d\n", + ret); + goto err4; + } +#endif master->dev.of_node = pdev->dev.of_node; ret = spi_register_master(master); @@ -559,7 +630,11 @@ err5: dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, tspi->rx_bb, tspi->rx_bb_phys); err4: +#if defined(CONFIG_TEGRA_SYSTEM_DMA) tegra_dma_free_channel(tspi->rx_dma); +#else + dma_release_channel(tspi->rx_dma); +#endif err3: clk_put(tspi->clk); err2: @@ -581,7 +656,11 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev) tspi = spi_master_get_devdata(master); spi_unregister_master(master); +#if defined(CONFIG_TEGRA_SYSTEM_DMA) tegra_dma_free_channel(tspi->rx_dma); +#else + dma_release_channel(tspi->rx_dma); +#endif dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, tspi->rx_bb, tspi->rx_bb_phys); diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c new file mode 100644 index 0000000..266a847 --- /dev/null +++ b/drivers/spi/spi-xcomm.c @@ -0,0 +1,276 @@ +/* + * Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <asm/unaligned.h> + +#define SPI_XCOMM_SETTINGS_LEN_OFFSET 10 +#define SPI_XCOMM_SETTINGS_3WIRE BIT(6) +#define SPI_XCOMM_SETTINGS_CS_HIGH BIT(5) +#define SPI_XCOMM_SETTINGS_SAMPLE_END BIT(4) +#define SPI_XCOMM_SETTINGS_CPHA BIT(3) +#define SPI_XCOMM_SETTINGS_CPOL BIT(2) +#define SPI_XCOMM_SETTINGS_CLOCK_DIV_MASK 0x3 +#define SPI_XCOMM_SETTINGS_CLOCK_DIV_64 0x2 +#define SPI_XCOMM_SETTINGS_CLOCK_DIV_16 0x1 +#define SPI_XCOMM_SETTINGS_CLOCK_DIV_4 0x0 + +#define SPI_XCOMM_CMD_UPDATE_CONFIG 0x03 +#define SPI_XCOMM_CMD_WRITE 0x04 + +#define SPI_XCOMM_CLOCK 48000000 + +struct spi_xcomm { + struct i2c_client *i2c; + + uint16_t settings; + uint16_t chipselect; + + unsigned int current_speed; + + uint8_t buf[63]; +}; + +static int spi_xcomm_sync_config(struct spi_xcomm *spi_xcomm, unsigned int len) +{ + uint16_t settings; + uint8_t *buf = spi_xcomm->buf; + + settings = spi_xcomm->settings; + settings |= len << SPI_XCOMM_SETTINGS_LEN_OFFSET; + + buf[0] = SPI_XCOMM_CMD_UPDATE_CONFIG; + put_unaligned_be16(settings, &buf[1]); + put_unaligned_be16(spi_xcomm->chipselect, &buf[3]); + + return i2c_master_send(spi_xcomm->i2c, buf, 5); +} + +static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm, + struct spi_device *spi, int is_active) +{ + unsigned long cs = spi->chip_select; + uint16_t chipselect = spi_xcomm->chipselect; + + if (is_active) + chipselect |= BIT(cs); + else + chipselect &= ~BIT(cs); + + spi_xcomm->chipselect = chipselect; +} + +static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm, + struct spi_device *spi, struct spi_transfer *t, unsigned int *settings) +{ + unsigned int speed; + + if ((t->bits_per_word && t->bits_per_word != 8) || t->len > 62) + return -EINVAL; + + speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; + + if (speed != spi_xcomm->current_speed) { + unsigned int divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, speed); + if (divider >= 64) + *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64; + else if (divider >= 16) + *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_16; + else + *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4; + + spi_xcomm->current_speed = speed; + } + + if (spi->mode & SPI_CPOL) + *settings |= SPI_XCOMM_SETTINGS_CPOL; + else + *settings &= ~SPI_XCOMM_SETTINGS_CPOL; + + if (spi->mode & SPI_CPHA) + *settings &= ~SPI_XCOMM_SETTINGS_CPHA; + else + *settings |= SPI_XCOMM_SETTINGS_CPHA; + + if (spi->mode & SPI_3WIRE) + *settings |= SPI_XCOMM_SETTINGS_3WIRE; + else + *settings &= ~SPI_XCOMM_SETTINGS_3WIRE; + + return 0; +} + +static int spi_xcomm_txrx_bufs(struct spi_xcomm *spi_xcomm, + struct spi_device *spi, struct spi_transfer *t) +{ + int ret; + + if (t->tx_buf) { + spi_xcomm->buf[0] = SPI_XCOMM_CMD_WRITE; + memcpy(spi_xcomm->buf + 1, t->tx_buf, t->len); + + ret = i2c_master_send(spi_xcomm->i2c, spi_xcomm->buf, t->len + 1); + if (ret < 0) + return ret; + else if (ret != t->len + 1) + return -EIO; + } else if (t->rx_buf) { + ret = i2c_master_recv(spi_xcomm->i2c, t->rx_buf, t->len); + if (ret < 0) + return ret; + else if (ret != t->len) + return -EIO; + } + + return t->len; +} + +static int spi_xcomm_transfer_one(struct spi_master *master, + struct spi_message *msg) +{ + struct spi_xcomm *spi_xcomm = spi_master_get_devdata(master); + unsigned int settings = spi_xcomm->settings; + struct spi_device *spi = msg->spi; + unsigned cs_change = 0; + struct spi_transfer *t; + bool is_first = true; + int status = 0; + bool is_last; + + is_first = true; + + spi_xcomm_chipselect(spi_xcomm, spi, true); + + list_for_each_entry(t, &msg->transfers, transfer_list) { + + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } + + status = spi_xcomm_setup_transfer(spi_xcomm, spi, t, &settings); + if (status < 0) + break; + + is_last = list_is_last(&t->transfer_list, &msg->transfers); + cs_change = t->cs_change; + + if (cs_change ^ is_last) + settings |= BIT(5); + else + settings &= ~BIT(5); + + if (t->rx_buf) { + spi_xcomm->settings = settings; + status = spi_xcomm_sync_config(spi_xcomm, t->len); + if (status < 0) + break; + } else if (settings != spi_xcomm->settings || is_first) { + spi_xcomm->settings = settings; + status = spi_xcomm_sync_config(spi_xcomm, 0); + if (status < 0) + break; + } + + if (t->len) { + status = spi_xcomm_txrx_bufs(spi_xcomm, spi, t); + + if (status < 0) + break; + + if (status > 0) + msg->actual_length += status; + } + status = 0; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + is_first = false; + } + + if (status != 0 || !cs_change) + spi_xcomm_chipselect(spi_xcomm, spi, false); + + msg->status = status; + spi_finalize_current_message(master); + + return status; +} + +static int spi_xcomm_setup(struct spi_device *spi) +{ + if (spi->bits_per_word != 8) + return -EINVAL; + + return 0; +} + +static int __devinit spi_xcomm_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct spi_xcomm *spi_xcomm; + struct spi_master *master; + int ret; + + master = spi_alloc_master(&i2c->dev, sizeof(*spi_xcomm)); + if (!master) + return -ENOMEM; + + spi_xcomm = spi_master_get_devdata(master); + spi_xcomm->i2c = i2c; + + master->num_chipselect = 16; + master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->setup = spi_xcomm_setup; + master->transfer_one_message = spi_xcomm_transfer_one; + master->dev.of_node = i2c->dev.of_node; + i2c_set_clientdata(i2c, master); + + ret = spi_register_master(master); + if (ret < 0) + spi_master_put(master); + + return ret; +} + +static int __devexit spi_xcomm_remove(struct i2c_client *i2c) +{ + struct spi_master *master = i2c_get_clientdata(i2c); + + spi_unregister_master(master); + + return 0; +} + +static const struct i2c_device_id spi_xcomm_ids[] = { + { "spi-xcomm" }, + { }, +}; + +static struct i2c_driver spi_xcomm_driver = { + .driver = { + .name = "spi-xcomm", + .owner = THIS_MODULE, + }, + .id_table = spi_xcomm_ids, + .probe = spi_xcomm_probe, + .remove = __devexit_p(spi_xcomm_remove), +}; +module_i2c_driver(spi_xcomm_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1041cb8..84c2861 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -53,7 +53,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf) { const struct spi_device *spi = to_spi_device(dev); - return sprintf(buf, "%s\n", spi->modalias); + return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias); } static struct device_attribute spi_dev_attrs[] = { diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 76dd1b1..fe1d7b2 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -231,6 +231,7 @@ enum ssp_chip_select { struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. + * @bus_id: identifier for this bus * @num_chipselect: chipselects are used to distinguish individual * SPI slaves, and are numbered from zero to num_chipselects - 1. * each slave has a chipselect signal, but it's common that not @@ -259,19 +260,13 @@ struct pl022_ssp_controller { * struct ssp_config_chip - spi_board_info.controller_data for SPI * slave devices, copied to spi_device.controller_data. * - * @lbm: used for test purpose to internally connect RX and TX * @iface: Interface type(Motorola, TI, Microwire, Universal) * @hierarchy: sets whether interface is master or slave * @slave_tx_disable: SSPTXD is disconnected (in slave mode only) * @clk_freq: Tune freq parameters of SSP(when in master mode) - * @endian_rx: Endianess of Data in Rx FIFO - * @endian_tx: Endianess of Data in Tx FIFO - * @data_size: Width of data element(4 to 32 bits) * @com_mode: communication mode: polling, Interrupt or DMA * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode) * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode) - * @clk_phase: Motorola SPI interface Clock phase - * @clk_pol: Motorola SPI interface Clock polarity * @ctrl_len: Microwire interface: Control length * @wait_state: Microwire interface: Wait state * @duplex: Microwire interface: Full/Half duplex @@ -279,8 +274,6 @@ struct pl022_ssp_controller { * before sampling the incoming line * @cs_control: function pointer to board-specific function to * assert/deassert I/O port to control HW generation of devices chip-select. - * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph) - * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { enum ssp_interface iface; |