ARM: mvebu: use clocks property for serial ports

Back when the Armada 370 and Armada XP initial support was introduced,
the only way to pass the clock frequency to the of_serial driver was
through a clock-frequency Device Tree property.

Thanks to 0bbeb3c3e84bc963d1c66661e082d207023b0e5c ('of serial port
driver - add clk_get_rate() support'), it is possible to use the
standard 'clocks' DT property to reference the clock used for a
particular UART controller. This clock is then used by the of_serial
driver to retrieve the clock rate.

This commit modifies the SoC-level Device Tree files of Armada 370,
Armada XP, Armada 375 and Armada 38x to use this possibility. Since
there is no gatable clock for the UART controllers, we simply
reference the TCLK, which is the main SoC clock for the peripherals.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397806908-7550-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

4 files changed, 8 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 10d7786..46aaee7f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -157,6 +157,7 @@
 				reg-shift = <2>;
 				interrupts = <41>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12100 {
@@ -165,6 +166,7 @@
 				reg-shift = <2>;
 				interrupts = <42>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index a7e0d54..6a3b741 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -201,6 +201,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -210,6 +211,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 7c3f3dd..0796cde 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -179,6 +179,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -188,6 +189,7 @@
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 0a7dff6..5902e83 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -58,6 +58,7 @@
 				reg-shift = <2>;
 				interrupts = <43>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12300 {
@@ -66,6 +67,7 @@
 				reg-shift = <2>;
 				interrupts = <44>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};