USB: remove warn() macro from usb media drivers

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 35 insertions, 23 deletions

diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 66783ff..78f5694 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -310,7 +310,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 
 	radio->curfreq = f->frequency;
 	if (dsbr100_setfreq(radio, radio->curfreq)==-1)
-		warn("Set frequency failed");
+		dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
 	return 0;
 }
 
@@ -361,12 +361,14 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 	case V4L2_CID_AUDIO_MUTE:
 		if (ctrl->value) {
 			if (dsbr100_stop(radio) == -1) {
-				warn("Radio did not respond properly");
+				dev_warn(&radio->usbdev->dev,
+					 "Radio did not respond properly\n");
 				return -EBUSY;
 			}
 		} else {
 			if (dsbr100_start(radio) == -1) {
-				warn("Radio did not respond properly");
+				dev_warn(&radio->usbdev->dev,
+					 "Radio did not respond properly\n");
 				return -EBUSY;
 			}
 		}
@@ -416,7 +418,8 @@ static int usb_dsbr100_open(struct inode *inode, struct file *file)
 	radio->muted = 1;
 
 	if (dsbr100_start(radio)<0) {
-		warn("Radio did not start up properly");
+		dev_warn(&radio->usbdev->dev,
+			 "Radio did not start up properly\n");
 		radio->users = 0;
 		unlock_kernel();
 		return -EIO;
@@ -501,7 +504,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
 	radio->curfreq = FREQ_MIN*FREQ_MUL;
 	video_set_drvdata(radio->videodev, radio);
 	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		warn("Could not register video device");
+		dev_warn(&intf->dev, "Could not register video device\n");
 		video_device_release(radio->videodev);
 		kfree(radio->transfer_buffer);
 		kfree(radio);
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 3aa538a..298810d 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -192,7 +192,7 @@ static void dabusb_iso_complete (struct urb *purb)
 					err("dabusb_iso_complete: invalid len %d", len);
 			}
 			else
-				warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status);
+				dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status);
 		if (dst != purb->actual_length)
 			err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length);
 	}
@@ -289,7 +289,7 @@ static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb)
 	}
 
 	if( ret == -EPIPE ) {
-		warn("CLEAR_FEATURE request to remove STALL condition.");
+		dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n");
 		if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
 			err("request failed");
 	}
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 935d73d..210f124 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -1098,9 +1098,10 @@ ov51x_clear_snapshot(struct usb_ov511 *ov)
 		reg_w(ov, R51x_SYS_SNAP, 0x02);
 		reg_w(ov, R51x_SYS_SNAP, 0x00);
 	} else if (ov->bclass == BCL_OV518) {
-		warn("snapshot reset not supported yet on OV518(+)");
+		dev_warn(&ov->dev->dev,
+			 "snapshot reset not supported yet on OV518(+)\n");
 	} else {
-		err("clear snap: invalid bridge type");
+		dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
 	}
 }
 
@@ -1115,14 +1116,16 @@ ov51x_check_snapshot(struct usb_ov511 *ov)
 	if (ov->bclass == BCL_OV511) {
 		ret = reg_r(ov, R51x_SYS_SNAP);
 		if (ret < 0) {
-			err("Error checking snspshot status (%d)", ret);
+			dev_err(&ov->dev->dev,
+				"Error checking snspshot status (%d)\n", ret);
 		} else if (ret & 0x08) {
 			status = 1;
 		}
 	} else if (ov->bclass == BCL_OV518) {
-		warn("snapshot check not supported yet on OV518(+)");
+		dev_warn(&ov->dev->dev,
+			 "snapshot check not supported yet on OV518(+)\n");
 	} else {
-		err("check snap: invalid bridge type");
+		dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
 	}
 
 	return status;
@@ -5217,7 +5220,8 @@ saa7111a_configure(struct usb_ov511 *ov)
 	if (ov->bclass == BCL_OV511)
 		reg_w(ov, 0x11, 0x00);
 	else
-		warn("SAA7111A not yet supported with OV518/OV518+");
+		dev_warn(&ov->dev->dev,
+			 "SAA7111A not yet supported with OV518/OV518+\n");
 
 	return 0;
 }
@@ -5456,7 +5460,8 @@ ov518_configure(struct usb_ov511 *ov)
 	 * required. OV518 has no uncompressed mode, to save RAM. */
 	if (!dumppix && !ov->compress) {
 		ov->compress = 1;
-		warn("Compression required with OV518...enabling");
+		dev_warn(&ov->dev->dev,
+			 "Compression required with OV518...enabling\n");
 	}
 
 	if (ov->bridge == BRG_OV518) {
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index e986c28..da27a52 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -229,7 +229,8 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
 
 	cam->input = input_dev = input_allocate_device();
 	if (!input_dev) {
-		warn("Not enough memory for camera's input device\n");
+		dev_warn(&dev->dev,
+			 "Not enough memory for camera's input device\n");
 		return;
 	}
 
@@ -243,8 +244,9 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
 
 	error = input_register_device(cam->input);
 	if (error) {
-		warn("Failed to register camera's input device, err: %d\n",
-		     error);
+		dev_warn(&dev->dev,
+			 "Failed to register camera's input device, err: %d\n",
+			 error);
 		input_free_device(cam->input);
 		cam->input = NULL;
 	}
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 05c61b5..4459b8a 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -93,7 +93,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
 
 	cam->input = input_dev = input_allocate_device();
 	if (!input_dev) {
-		warn("insufficient mem for cam input device");
+		dev_warn(&dev->dev, "insufficient mem for cam input device\n");
 		return;
 	}
 
@@ -107,8 +107,9 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
 
 	error = input_register_device(cam->input);
 	if (error) {
-		warn("Failed to register camera's input device, err: %d\n",
-		     error);
+		dev_warn(&dev->dev,
+			 "Failed to register camera's input device, err: %d\n",
+			 error);
 		input_free_device(cam->input);
 		cam->input = NULL;
 	}
@@ -587,8 +588,9 @@ static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb)
 			dataurb->iso_frame_desc[i].offset;
 
 		if (st < 0) {
-			warn("Data error: packet=%d. len=%d. status=%d.",
-			      i, n, st);
+			dev_warn(&uvd->dev->dev,
+				 "Data error: packet=%d. len=%d. status=%d.\n",
+				 i, n, st);
 			uvd->stats.iso_err_count++;
 			continue;
 		}
@@ -699,7 +701,7 @@ static void qcm_stop_data(struct uvd *uvd)
 
 	ret = qcm_camera_off(uvd);
 	if (ret)
-		warn("couldn't turn the cam off.");
+		dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n");
 
 	uvd->streaming = 0;