diff options
author | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2014-10-03 15:41:16 +0200 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2014-10-03 15:41:16 +0200 |
commit | 6f1293ff747ddcb696d546e3efcd31f7cc42b9a5 (patch) | |
tree | a11d54bb4493dbd40925bf4b2f4dcdf9de64b4d3 | |
parent | b1b12babe3b72cfb08b875245e5a5d7c2747c772 (diff) | |
parent | f9739d27059d8fd7b64096ea7251608628b5bd30 (diff) | |
download | op-kernel-dev-6f1293ff747ddcb696d546e3efcd31f7cc42b9a5.zip op-kernel-dev-6f1293ff747ddcb696d546e3efcd31f7cc42b9a5.tar.gz |
Merge back cpufreq material for v3.18.
24 files changed, 442 insertions, 280 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt index 366690c..e41c98f 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -1,8 +1,8 @@ -Generic CPU0 cpufreq driver +Generic cpufreq driver -It is a generic cpufreq driver for CPU0 frequency management. It -supports both uniprocessor (UP) and symmetric multiprocessor (SMP) -systems which share clock and voltage across all CPUs. +It is a generic DT based cpufreq driver for frequency management. It supports +both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share +clock and voltage across all CPUs. Both required and optional properties listed below must be defined under node /cpus/cpu@0. diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index fdfda1f..7309988b 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -32,7 +32,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_IDLE=y CONFIG_ARM_MVEBU_V7_CPUIDLE=y CONFIG_CPU_FREQ=y -CONFIG_CPUFREQ_GENERIC=y +CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 080e66c..dc8f1a6 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -20,7 +20,7 @@ static void __init imx27_dt_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; mxc_arch_reset_init_dt(); diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index c77deb3..2c5fcaf 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -51,7 +51,7 @@ static void __init imx51_ipu_mipi_setup(void) static void __init imx51_dt_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; mxc_arch_reset_init_dt(); imx51_ipu_mipi_setup(); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 8a70a51..bbd8664 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -644,7 +644,7 @@ static int __init armada_xp_pmsu_cpufreq_init(void) } } - platform_device_register_simple("cpufreq-generic", -1, NULL, 0); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 828aee9..58920bc 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -282,7 +282,7 @@ static inline void omap_init_cpufreq(void) if (!of_have_populated_dt()) devinfo.name = "omap-cpufreq"; else - devinfo.name = "cpufreq-cpu0"; + devinfo.name = "cpufreq-dt"; platform_device_register_full(&devinfo); } diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c index 2f7723e..0110751 100644 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c @@ -50,7 +50,7 @@ static void __init ape6evm_add_standard_devices(void) r8a73a4_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); } static const char *ape6evm_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 8a24b2b..57fbff0 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -12,6 +12,6 @@ int __init shmobile_cpufreq_init(void) { - platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; } diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2c802ae..15b990c 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -775,7 +775,7 @@ void __init sh73a0_add_early_devices(void) void __init sh73a0_add_standard_devices_dt(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", .id = -1, }; /* clocks are setup late during boot in the case of DT */ sh73a0_clock_init(); @@ -784,7 +784,7 @@ void __init sh73a0_add_standard_devices_dt(void) ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - /* Instantiate cpufreq-cpu0 */ + /* Instantiate cpufreq-dt */ platform_device_register_full(&devinfo); } diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 31a6fa4..ec03ec4 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -104,7 +104,7 @@ static int __init zynq_get_revision(void) */ static void __init zynq_init_machine(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; struct device *parent = NULL; diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index ffe350f..3489f8f 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -183,14 +183,14 @@ config CPU_FREQ_GOV_CONSERVATIVE If in doubt, say N. -config GENERIC_CPUFREQ_CPU0 - tristate "Generic CPU0 cpufreq driver" +config CPUFREQ_DT + tristate "Generic DT based cpufreq driver" depends on HAVE_CLK && OF - # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y: + # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: depends on !CPU_THERMAL || THERMAL select PM_OPP help - This adds a generic cpufreq driver for CPU0 frequency management. + This adds a generic DT based cpufreq driver for frequency management. It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share clock and voltage across all CPUs. diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 7364a53..48ed28b 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -92,7 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" - depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR + depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR default m help This adds the CPUFreq driver for Calxeda Highbank SoC diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index db6d9a2..40c53dc 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o -obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o +obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o ################################################################################## # x86 drivers. diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c deleted file mode 100644 index 0d2172b..0000000 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Copyright (C) 2012 Freescale Semiconductor, Inc. - * - * The OPP code in function cpu0_set_target() is reused from - * drivers/cpufreq/omap-cpufreq.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/clk.h> -#include <linux/cpu.h> -#include <linux/cpu_cooling.h> -#include <linux/cpufreq.h> -#include <linux/cpumask.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/pm_opp.h> -#include <linux/platform_device.h> -#include <linux/regulator/consumer.h> -#include <linux/slab.h> -#include <linux/thermal.h> - -static unsigned int transition_latency; -static unsigned int voltage_tolerance; /* in percentage */ - -static struct device *cpu_dev; -static struct clk *cpu_clk; -static struct regulator *cpu_reg; -static struct cpufreq_frequency_table *freq_table; -static struct thermal_cooling_device *cdev; - -static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index) -{ - struct dev_pm_opp *opp; - unsigned long volt = 0, volt_old = 0, tol = 0; - unsigned int old_freq, new_freq; - long freq_Hz, freq_exact; - int ret; - - freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); - if (freq_Hz <= 0) - freq_Hz = freq_table[index].frequency * 1000; - - freq_exact = freq_Hz; - new_freq = freq_Hz / 1000; - old_freq = clk_get_rate(cpu_clk) / 1000; - - if (!IS_ERR(cpu_reg)) { - rcu_read_lock(); - opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); - if (IS_ERR(opp)) { - rcu_read_unlock(); - pr_err("failed to find OPP for %ld\n", freq_Hz); - return PTR_ERR(opp); - } - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - tol = volt * voltage_tolerance / 100; - volt_old = regulator_get_voltage(cpu_reg); - } - - pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n", - old_freq / 1000, volt_old ? volt_old / 1000 : -1, - new_freq / 1000, volt ? volt / 1000 : -1); - - /* scaling up? scale voltage before frequency */ - if (!IS_ERR(cpu_reg) && new_freq > old_freq) { - ret = regulator_set_voltage_tol(cpu_reg, volt, tol); - if (ret) { - pr_err("failed to scale voltage up: %d\n", ret); - return ret; - } - } - - ret = clk_set_rate(cpu_clk, freq_exact); - if (ret) { - pr_err("failed to set clock rate: %d\n", ret); - if (!IS_ERR(cpu_reg)) - regulator_set_voltage_tol(cpu_reg, volt_old, tol); - return ret; - } - - /* scaling down? scale voltage after frequency */ - if (!IS_ERR(cpu_reg) && new_freq < old_freq) { - ret = regulator_set_voltage_tol(cpu_reg, volt, tol); - if (ret) { - pr_err("failed to scale voltage down: %d\n", ret); - clk_set_rate(cpu_clk, old_freq * 1000); - } - } - - return ret; -} - -static int cpu0_cpufreq_init(struct cpufreq_policy *policy) -{ - policy->clk = cpu_clk; - return cpufreq_generic_init(policy, freq_table, transition_latency); -} - -static struct cpufreq_driver cpu0_cpufreq_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = cpu0_set_target, - .get = cpufreq_generic_get, - .init = cpu0_cpufreq_init, - .name = "generic_cpu0", - .attr = cpufreq_generic_attr, -}; - -static int cpu0_cpufreq_probe(struct platform_device *pdev) -{ - struct device_node *np; - int ret; - - cpu_dev = get_cpu_device(0); - if (!cpu_dev) { - pr_err("failed to get cpu0 device\n"); - return -ENODEV; - } - - np = of_node_get(cpu_dev->of_node); - if (!np) { - pr_err("failed to find cpu0 node\n"); - return -ENOENT; - } - - cpu_reg = regulator_get_optional(cpu_dev, "cpu0"); - if (IS_ERR(cpu_reg)) { - /* - * If cpu0 regulator supply node is present, but regulator is - * not yet registered, we should try defering probe. - */ - if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { - dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n"); - ret = -EPROBE_DEFER; - goto out_put_node; - } - pr_warn("failed to get cpu0 regulator: %ld\n", - PTR_ERR(cpu_reg)); - } - - cpu_clk = clk_get(cpu_dev, NULL); - if (IS_ERR(cpu_clk)) { - ret = PTR_ERR(cpu_clk); - pr_err("failed to get cpu0 clock: %d\n", ret); - goto out_put_reg; - } - - /* OPPs might be populated at runtime, don't check for error here */ - of_init_opp_table(cpu_dev); - - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); - if (ret) { - pr_err("failed to init cpufreq table: %d\n", ret); - goto out_put_clk; - } - - of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance); - - if (of_property_read_u32(np, "clock-latency", &transition_latency)) - transition_latency = CPUFREQ_ETERNAL; - - if (!IS_ERR(cpu_reg)) { - struct dev_pm_opp *opp; - unsigned long min_uV, max_uV; - int i; - - /* - * OPP is maintained in order of increasing frequency, and - * freq_table initialised from OPP is therefore sorted in the - * same order. - */ - for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) - ; - rcu_read_lock(); - opp = dev_pm_opp_find_freq_exact(cpu_dev, - freq_table[0].frequency * 1000, true); - min_uV = dev_pm_opp_get_voltage(opp); - opp = dev_pm_opp_find_freq_exact(cpu_dev, - freq_table[i-1].frequency * 1000, true); - max_uV = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); - if (ret > 0) - transition_latency += ret * 1000; - } - - ret = cpufreq_register_driver(&cpu0_cpufreq_driver); - if (ret) { - pr_err("failed register driver: %d\n", ret); - goto out_free_table; - } - - /* - * For now, just loading the cooling device; - * thermal DT code takes care of matching them. - */ - if (of_find_property(np, "#cooling-cells", NULL)) { - cdev = of_cpufreq_cooling_register(np, cpu_present_mask); - if (IS_ERR(cdev)) - pr_err("running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev)); - } - - of_node_put(np); - return 0; - -out_free_table: - dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); -out_put_clk: - if (!IS_ERR(cpu_clk)) - clk_put(cpu_clk); -out_put_reg: - if (!IS_ERR(cpu_reg)) - regulator_put(cpu_reg); -out_put_node: - of_node_put(np); - return ret; -} - -static int cpu0_cpufreq_remove(struct platform_device *pdev) -{ - cpufreq_cooling_unregister(cdev); - cpufreq_unregister_driver(&cpu0_cpufreq_driver); - dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); - - return 0; -} - -static struct platform_driver cpu0_cpufreq_platdrv = { - .driver = { - .name = "cpufreq-cpu0", - .owner = THIS_MODULE, - }, - .probe = cpu0_cpufreq_probe, - .remove = cpu0_cpufreq_remove, -}; -module_platform_driver(cpu0_cpufreq_platdrv); - -MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); -MODULE_DESCRIPTION("Generic CPU0 cpufreq driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c new file mode 100644 index 0000000..6bbb8b9 --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt.c @@ -0,0 +1,364 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Copyright (C) 2014 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * The OPP code in function set_target() is reused from + * drivers/cpufreq/omap-cpufreq.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpu_cooling.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +struct private_data { + struct device *cpu_dev; + struct regulator *cpu_reg; + struct thermal_cooling_device *cdev; + unsigned int voltage_tolerance; /* in percentage */ +}; + +static int set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct dev_pm_opp *opp; + struct cpufreq_frequency_table *freq_table = policy->freq_table; + struct clk *cpu_clk = policy->clk; + struct private_data *priv = policy->driver_data; + struct device *cpu_dev = priv->cpu_dev; + struct regulator *cpu_reg = priv->cpu_reg; + unsigned long volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; + long freq_Hz, freq_exact; + int ret; + + freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); + if (freq_Hz <= 0) + freq_Hz = freq_table[index].frequency * 1000; + + freq_exact = freq_Hz; + new_freq = freq_Hz / 1000; + old_freq = clk_get_rate(cpu_clk) / 1000; + + if (!IS_ERR(cpu_reg)) { + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(cpu_dev, "failed to find OPP for %ld\n", + freq_Hz); + return PTR_ERR(opp); + } + volt = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + tol = volt * priv->voltage_tolerance / 100; + volt_old = regulator_get_voltage(cpu_reg); + } + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (!IS_ERR(cpu_reg) && new_freq > old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage up: %d\n", + ret); + return ret; + } + } + + ret = clk_set_rate(cpu_clk, freq_exact); + if (ret) { + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + if (!IS_ERR(cpu_reg)) + regulator_set_voltage_tol(cpu_reg, volt_old, tol); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (!IS_ERR(cpu_reg) && new_freq < old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage down: %d\n", + ret); + clk_set_rate(cpu_clk, old_freq * 1000); + } + } + + return ret; +} + +static int allocate_resources(int cpu, struct device **cdev, + struct regulator **creg, struct clk **cclk) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret = 0; + char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", cpu); + return -ENODEV; + } + + /* Try "cpu0" for older DTs */ + if (!cpu) + reg = reg_cpu0; + else + reg = reg_cpu; + +try_again: + cpu_reg = regulator_get_optional(cpu_dev, reg); + if (IS_ERR(cpu_reg)) { + /* + * If cpu's regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", + cpu); + return -EPROBE_DEFER; + } + + /* Try with "cpu-supply" */ + if (reg == reg_cpu0) { + reg = reg_cpu; + goto try_again; + } + + dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n", + cpu, PTR_ERR(cpu_reg)); + } + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + /* put regulator */ + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + ret = PTR_ERR(cpu_clk); + + /* + * If cpu's clk node is present, but clock is not yet + * registered, we should try defering probe. + */ + if (ret == -EPROBE_DEFER) + dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu); + else + dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret, + cpu); + } else { + *cdev = cpu_dev; + *creg = cpu_reg; + *cclk = cpu_clk; + } + + return ret; +} + +static int cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + struct thermal_cooling_device *cdev; + struct device_node *np; + struct private_data *priv; + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + unsigned int transition_latency; + int ret; + + ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) { + pr_err("%s: Failed to allocate resources\n: %d", __func__, ret); + return ret; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu); + ret = -ENOENT; + goto out_put_reg_clk; + } + + /* OPPs might be populated at runtime, don't check for error here */ + of_init_opp_table(cpu_dev); + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_put_node; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_table; + } + + of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + if (!IS_ERR(cpu_reg)) { + struct dev_pm_opp *opp; + unsigned long min_uV, max_uV; + int i; + + /* + * OPP is maintained in order of increasing frequency, and + * freq_table initialised from OPP is therefore sorted in the + * same order. + */ + for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) + ; + rcu_read_lock(); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[0].frequency * 1000, true); + min_uV = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[i-1].frequency * 1000, true); + max_uV = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); + if (ret > 0) + transition_latency += ret * 1000; + } + + /* + * For now, just loading the cooling device; + * thermal DT code takes care of matching them. + */ + if (of_find_property(np, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(np, cpu_present_mask); + if (IS_ERR(cdev)) + dev_err(cpu_dev, + "running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + else + priv->cdev = cdev; + } + + priv->cpu_dev = cpu_dev; + priv->cpu_reg = cpu_reg; + policy->driver_data = priv; + + policy->clk = cpu_clk; + ret = cpufreq_generic_init(policy, freq_table, transition_latency); + if (ret) + goto out_cooling_unregister; + + of_node_put(np); + + return 0; + +out_cooling_unregister: + cpufreq_cooling_unregister(priv->cdev); + kfree(priv); +out_free_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_put_node: + of_node_put(np); +out_put_reg_clk: + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + return ret; +} + +static int cpufreq_exit(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + + cpufreq_cooling_unregister(priv->cdev); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + clk_put(policy->clk); + if (!IS_ERR(priv->cpu_reg)) + regulator_put(priv->cpu_reg); + kfree(priv); + + return 0; +} + +static struct cpufreq_driver dt_cpufreq_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = set_target, + .get = cpufreq_generic_get, + .init = cpufreq_init, + .exit = cpufreq_exit, + .name = "cpufreq-dt", + .attr = cpufreq_generic_attr, +}; + +static int dt_cpufreq_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret; + + /* + * All per-cluster (CPUs sharing clock/voltages) initialization is done + * from ->init(). In probe(), we just need to make sure that clk and + * regulators are available. Else defer probe and retry. + * + * FIXME: Is checking this only for CPU0 sufficient ? + */ + ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) + return ret; + + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + ret = cpufreq_register_driver(&dt_cpufreq_driver); + if (ret) + dev_err(cpu_dev, "failed register driver: %d\n", ret); + + return ret; +} + +static int dt_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&dt_cpufreq_driver); + return 0; +} + +static struct platform_driver dt_cpufreq_platdrv = { + .driver = { + .name = "cpufreq-dt", + .owner = THIS_MODULE, + }, + .probe = dt_cpufreq_probe, + .remove = dt_cpufreq_remove, +}; +module_platform_driver(dt_cpufreq_platdrv); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Generic cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 61190f6..24bf76f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -437,7 +437,7 @@ static struct cpufreq_governor *__find_governor(const char *str_governor) struct cpufreq_governor *t; list_for_each_entry(t, &cpufreq_governor_list, governor_list) - if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN)) + if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN)) return t; return NULL; @@ -455,10 +455,10 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, goto out; if (cpufreq_driver->setpolicy) { - if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { + if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { *policy = CPUFREQ_POLICY_PERFORMANCE; err = 0; - } else if (!strnicmp(str_governor, "powersave", + } else if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) { *policy = CPUFREQ_POLICY_POWERSAVE; err = 0; @@ -1382,7 +1382,7 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, if (!cpufreq_suspended) pr_debug("%s: policy Kobject moved to cpu: %d from: %d\n", __func__, new_cpu, cpu); - } else if (cpufreq_driver->stop_cpu && cpufreq_driver->setpolicy) { + } else if (cpufreq_driver->stop_cpu) { cpufreq_driver->stop_cpu(policy); } diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index 61a5431..843ec82 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -127,7 +127,7 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); if (!np) { diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 351a207..9e78a85 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -174,7 +174,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); if (!np) { diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index c91ce69..3eafdc7 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -153,7 +153,7 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); if (!np) { diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c index bf8902a..ec399ad 100644 --- a/drivers/cpufreq/highbank-cpufreq.c +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -6,7 +6,7 @@ * published by the Free Software Foundation. * * This driver provides the clk notifier callbacks that are used when - * the cpufreq-cpu0 driver changes to frequency to alert the highbank + * the cpufreq-dt driver changes to frequency to alert the highbank * EnergyCore Management Engine (ECME) about the need to change * voltage. The ECME interfaces with the actual voltage regulators. */ @@ -60,7 +60,7 @@ static struct notifier_block hb_cpufreq_clk_nb = { static int hb_cpufreq_driver_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; struct device *cpu_dev; struct clk *cpu_clk; struct device_node *np; @@ -95,7 +95,7 @@ static int hb_cpufreq_driver_init(void) goto out_put_node; } - /* Instantiate cpufreq-cpu0 */ + /* Instantiate cpufreq-dt */ platform_device_register_full(&devinfo); out_put_node: diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index 379c083..2dfd4fd 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -26,6 +26,7 @@ #include <linux/cpufreq.h> #include <linux/smp.h> #include <linux/of.h> +#include <linux/reboot.h> #include <asm/cputhreads.h> #include <asm/firmware.h> @@ -35,6 +36,7 @@ #define POWERNV_MAX_PSTATES 256 static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; +static bool rebooting; /* * Note: The set of pstates consists of contiguous integers, the @@ -284,6 +286,15 @@ static void set_pstate(void *freq_data) } /* + * get_nominal_index: Returns the index corresponding to the nominal + * pstate in the cpufreq table + */ +static inline unsigned int get_nominal_index(void) +{ + return powernv_pstate_info.max - powernv_pstate_info.nominal; +} + +/* * powernv_cpufreq_target_index: Sets the frequency corresponding to * the cpufreq table entry indexed by new_index on the cpus in the * mask policy->cpus @@ -293,6 +304,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy, { struct powernv_smp_call_data freq_data; + if (unlikely(rebooting) && new_index != get_nominal_index()) + return 0; + freq_data.pstate_id = powernv_freqs[new_index].driver_data; /* @@ -317,6 +331,33 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy) return cpufreq_table_validate_and_show(policy, powernv_freqs); } +static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *unused) +{ + int cpu; + struct cpufreq_policy cpu_policy; + + rebooting = true; + for_each_online_cpu(cpu) { + cpufreq_get_policy(&cpu_policy, cpu); + powernv_cpufreq_target_index(&cpu_policy, get_nominal_index()); + } + + return NOTIFY_DONE; +} + +static struct notifier_block powernv_cpufreq_reboot_nb = { + .notifier_call = powernv_cpufreq_reboot_notifier, +}; + +static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy) +{ + struct powernv_smp_call_data freq_data; + + freq_data.pstate_id = powernv_pstate_info.min; + smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1); +} + static struct cpufreq_driver powernv_cpufreq_driver = { .name = "powernv-cpufreq", .flags = CPUFREQ_CONST_LOOPS, @@ -324,6 +365,7 @@ static struct cpufreq_driver powernv_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, .target_index = powernv_cpufreq_target_index, .get = powernv_cpufreq_get, + .stop_cpu = powernv_cpufreq_stop_cpu, .attr = powernv_cpu_freq_attr, }; @@ -342,12 +384,14 @@ static int __init powernv_cpufreq_init(void) return rc; } + register_reboot_notifier(&powernv_cpufreq_reboot_nb); return cpufreq_register_driver(&powernv_cpufreq_driver); } module_init(powernv_cpufreq_init); static void __exit powernv_cpufreq_exit(void) { + unregister_reboot_notifier(&powernv_cpufreq_reboot_nb); cpufreq_unregister_driver(&powernv_cpufreq_driver); } module_exit(powernv_cpufreq_exit); diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index 3607070..bee5df7 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -199,7 +199,6 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) } data->table = table; - per_cpu(cpu_data, cpu) = data; /* update ->cpus if we have cluster, no harm if not */ cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu)); diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 3f9791f..567caa6 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -597,7 +597,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) * and dependencies on platform headers. It is necessary to enable * S5PV210 multi-platform support and will be removed together with * this whole driver as soon as S5PV210 gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock"); if (!np) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 7d1955a..138336b 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -112,6 +112,9 @@ struct cpufreq_policy { spinlock_t transition_lock; wait_queue_head_t transition_wait; struct task_struct *transition_task; /* Task which is doing the transition */ + + /* For cpufreq driver's internal use */ + void *driver_data; }; /* Only for ACPI */ |