diff options
author | Fabio Estevam <fabio.estevam@freescale.com> | 2015-03-10 22:40:02 -0300 |
---|---|---|
committer | Shawn Guo <shawn.guo@linaro.org> | 2015-03-11 09:56:23 +0800 |
commit | 3877942b0c7f36c82b2f05e84776b2dfe1afb784 (patch) | |
tree | ce0a5a4d48804543d31482674242a2a8928ed28b | |
parent | f027e601f8f7903ac6f33741f9e513aaf8391bc8 (diff) | |
download | op-kernel-dev-3877942b0c7f36c82b2f05e84776b2dfe1afb784.zip op-kernel-dev-3877942b0c7f36c82b2f05e84776b2dfe1afb784.tar.gz |
ARM: imx25: Remove eukrea mx25 board files
eukrea mx25 is well supported in device tree, so let's get rid of its board
files.
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 34 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 310 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 172 |
4 files changed, 0 insertions, 518 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 247a465..6eec625 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -149,40 +149,6 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -comment "MX25 platforms:" - -config MACH_EUKREA_CPUIMX25SD - bool "Support Eukrea CPUIMX25 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX25 - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25SD - default MACH_EUKREA_MBIMXSD25_BASEBOARD - -config MACH_EUKREA_MBIMXSD25_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - config MACH_IMX25_DT bool "Support i.MX25 platforms from device tree" select SOC_IMX25 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e92ede9..724b7fb 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -49,8 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines -obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c deleted file mode 100644 index 10e5381..0000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <video/platform_lcd.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx25.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = { - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - /* LCD_PWR */ - MX25_PAD_PWM__GPIO_1_26, - /* LED */ - MX25_PAD_POWER_FAIL__GPIO_3_19, - /* SWITCH */ - MX25_PAD_VSTBY_ACK__GPIO_3_18, - /* UART2 */ - MX25_PAD_UART2_RTS__UART2_RTS, - MX25_PAD_UART2_CTS__UART2_CTS, - MX25_PAD_UART2_TXD__UART2_TXD, - MX25_PAD_UART2_RXD__UART2_RXD, - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - MX25_PAD_DE_B__GPIO_2_20, - /* I2S */ - MX25_PAD_KPP_COL3__AUD5_TXFS, - MX25_PAD_KPP_COL2__AUD5_TXC, - MX25_PAD_KPP_COL1__AUD5_RXD, - MX25_PAD_KPP_COL0__AUD5_TXD, - /* CAN */ - MX25_PAD_GPIO_D__CAN2_RX, - MX25_PAD_GPIO_C__CAN2_TX, - /* SPI1 */ - MX25_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX25_PAD_CSPI1_MISO__CSPI1_MISO, - MX25_PAD_CSPI1_SS0__GPIO_1_16, - MX25_PAD_CSPI1_SS1__GPIO_1_17, - MX25_PAD_CSPI1_SCLK__CSPI1_SCLK, - MX25_PAD_CSPI1_RDY__GPIO_2_22, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 19) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18) -#define GPIO_SD1CD IMX_GPIO_NR(2, 20) -#define GPIO_LCDPWR IMX_GPIO_NR(1, 26) -#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16) -#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17) -#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22) - -static struct imx_fb_videomode eukrea_mximxsd_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 30, - .right_margin = 38, - .upper_margin = 20, - .lower_margin = 3, - .hsync_len = 15, - .vsync_len = 4, - }, - .bpp = 16, - .pcr = 0xCAD08B80, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 7, - .left_margin = 100, - .right_margin = 100, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 100, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 7, - .left_margin = 75, - .right_margin = 75, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 75, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = { - .mode = eukrea_mximxsd_modes, - .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_gpio = GPIO_SD1CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - }, -}; - -static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; - -static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = { - .chipselect = eukrea_mbimxsd25_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs), -}; - -/* - * system init for baseboard usage. Will be called by cpuimx25 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd25_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx25_add_imx_uart1(&uart_pdata); - imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); - imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx25_add_flexcan1(); - imx25_add_sdhci_esdhc_imx(0, &sd1_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); - gpio_direction_input(GPIO_SPI1_IRQ); - gpio_free(GPIO_SPI1_IRQ); - imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data); - spi_register_board_info(eukrea_mbimxsd25_spi_board_info, - ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c deleted file mode 100644 index 0263219..0000000 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx25.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const iomux_v3_cfg_t eukrea_cpuimx25_pads[] __initconst = { - /* FEC - RMII */ - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxc_nand_platform_data -eukrea_cpuimx25_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxi2c_platform_data -eukrea_cpuimx25_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static int eukrea_cpuimx25_otg_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data otg_pdata __initconst = { - .init = eukrea_cpuimx25_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = eukrea_cpuimx25_usbh2_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx25_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx25_otg_mode); - -static void __init eukrea_cpuimx25_init(void) -{ - imx25_soc_init(); - - if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, - ARRAY_SIZE(eukrea_cpuimx25_pads))) - printk(KERN_ERR "error setting cpuimx25 pads !\n"); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(); - imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(); - - i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); - imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); - - if (otg_mode_host) - imx25_add_mxc_ehci_otg(&otg_pdata); - else - imx25_add_fsl_usb2_udc(&otg_device_pdata); - - imx25_add_mxc_ehci_hs(&usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD - eukrea_mbimxsd25_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx25_timer_init(void) -{ - mx25_clocks_init(); -} - -MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") - /* Maintainer: Eukrea Electromatique */ - .atag_offset = 0x100, - .map_io = mx25_map_io, - .init_early = imx25_init_early, - .init_irq = mx25_init_irq, - .init_time = eukrea_cpuimx25_timer_init, - .init_machine = eukrea_cpuimx25_init, - .restart = mxc_restart, -MACHINE_END |