ath10k: implement get_survey()

This implements a limited subset of what can be
reported in the survey dump.

This can be used for assessing approximate channel
load, e.g. for automatic channel selection.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

4 files changed, 122 insertions, 1 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ff42bb7..e4bba56 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -38,6 +38,7 @@
 #define ATH10K_SCAN_ID 0
 #define WMI_READY_TIMEOUT (5 * HZ)
 #define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
+#define ATH10K_NUM_CHANS 38
 
 /* Antenna noise floor */
 #define ATH10K_DEFAULT_NOISE_FLOOR -95
@@ -375,6 +376,12 @@ struct ath10k {
 
 	struct work_struct restart_work;
 
+	/* cycle count is reported twice for each visited channel during scan.
+	 * access protected by data_lock */
+	u32 survey_last_rx_clear_count;
+	u32 survey_last_cycle_count;
+	struct survey_info survey[ATH10K_NUM_CHANS];
+
 #ifdef CONFIG_ATH10K_DEBUGFS
 	struct ath10k_debug debug;
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5784337..9ea31f8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2934,6 +2934,41 @@ static void ath10k_restart_complete(struct ieee80211_hw *hw)
 	mutex_unlock(&ar->conf_mutex);
 }
 
+static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
+			     struct survey_info *survey)
+{
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_supported_band *sband;
+	struct survey_info *ar_survey = &ar->survey[idx];
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+	if (sband && idx >= sband->n_channels) {
+		idx -= sband->n_channels;
+		sband = NULL;
+	}
+
+	if (!sband)
+		sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+	if (!sband || idx >= sband->n_channels) {
+		ret = -ENOENT;
+		goto exit;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	memcpy(survey, ar_survey, sizeof(*survey));
+	spin_unlock_bh(&ar->data_lock);
+
+	survey->channel = &sband->channels[idx];
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
 static const struct ieee80211_ops ath10k_ops = {
 	.tx				= ath10k_tx,
 	.start				= ath10k_start,
@@ -2955,6 +2990,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.flush				= ath10k_flush,
 	.tx_last_beacon			= ath10k_tx_last_beacon,
 	.restart_complete		= ath10k_restart_complete,
+	.get_survey			= ath10k_get_survey,
 #ifdef CONFIG_PM
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1cbcb2e..55f90c7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -390,9 +390,82 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	return 0;
 }
 
+static int freq_to_idx(struct ath10k *ar, int freq)
+{
+	struct ieee80211_supported_band *sband;
+	int band, ch, idx = 0;
+
+	for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
+		sband = ar->hw->wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (ch = 0; ch < sband->n_channels; ch++, idx++)
+			if (sband->channels[ch].center_freq == freq)
+				goto exit;
+	}
+
+exit:
+	return idx;
+}
+
 static void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_CHAN_INFO_EVENTID\n");
+	struct wmi_chan_info_event *ev;
+	struct survey_info *survey;
+	u32 err_code, freq, cmd_flags, noise_floor, rx_clear_count, cycle_count;
+	int idx;
+
+	ev = (struct wmi_chan_info_event *)skb->data;
+
+	err_code = __le32_to_cpu(ev->err_code);
+	freq = __le32_to_cpu(ev->freq);
+	cmd_flags = __le32_to_cpu(ev->cmd_flags);
+	noise_floor = __le32_to_cpu(ev->noise_floor);
+	rx_clear_count = __le32_to_cpu(ev->rx_clear_count);
+	cycle_count = __le32_to_cpu(ev->cycle_count);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "chan info err_code %d freq %d cmd_flags %d noise_floor %d rx_clear_count %d cycle_count %d\n",
+		   err_code, freq, cmd_flags, noise_floor, rx_clear_count,
+		   cycle_count);
+
+	spin_lock_bh(&ar->data_lock);
+
+	if (!ar->scan.in_progress) {
+		ath10k_warn("chan info event without a scan request?\n");
+		goto exit;
+	}
+
+	idx = freq_to_idx(ar, freq);
+	if (idx >= ARRAY_SIZE(ar->survey)) {
+		ath10k_warn("chan info: invalid frequency %d (idx %d out of bounds)\n",
+			    freq, idx);
+		goto exit;
+	}
+
+	if (cmd_flags & WMI_CHAN_INFO_FLAG_COMPLETE) {
+		/* During scanning chan info is reported twice for each
+		 * visited channel. The reported cycle count is global
+		 * and per-channel cycle count must be calculated */
+
+		cycle_count -= ar->survey_last_cycle_count;
+		rx_clear_count -= ar->survey_last_rx_clear_count;
+
+		survey = &ar->survey[idx];
+		survey->channel_time = WMI_CHAN_INFO_MSEC(cycle_count);
+		survey->channel_time_rx = WMI_CHAN_INFO_MSEC(rx_clear_count);
+		survey->noise = noise_floor;
+		survey->filled = SURVEY_INFO_CHANNEL_TIME |
+				 SURVEY_INFO_CHANNEL_TIME_RX |
+				 SURVEY_INFO_NOISE_DBM;
+	}
+
+	ar->survey_last_rx_clear_count = rx_clear_count;
+	ar->survey_last_cycle_count = cycle_count;
+
+exit:
+	spin_unlock_bh(&ar->data_lock);
 }
 
 static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index da3b2bc..2c5a4f8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2931,6 +2931,11 @@ struct wmi_chan_info_event {
 	__le32 cycle_count;
 } __packed;
 
+#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
+
+/* FIXME: empirically extrapolated */
+#define WMI_CHAN_INFO_MSEC(x) ((x) / 76595)
+
 /* Beacon filter wmi command info */
 #define BCN_FLT_MAX_SUPPORTED_IES	256
 #define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)