diff options
author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2014-09-10 21:29:56 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-26 18:01:56 +0200 |
commit | 234abab143aef82c0ef1f2de409c0db96b666f3c (patch) | |
tree | 45580c4dd61a49fb028a1b5ecf3fa637efe34ee7 | |
parent | cc952e7017fa2e8871ee6a94f2c606ff5911f61e (diff) | |
download | op-kernel-dev-234abab143aef82c0ef1f2de409c0db96b666f3c.zip op-kernel-dev-234abab143aef82c0ef1f2de409c0db96b666f3c.tar.gz |
tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
The OMAP UART provides support for HW assisted flow control. What is
missing is the support to throttle / unthrottle callbacks which are used
by the omap-serial driver at the moment.
This patch adds the callbacks. It should be safe to add them since they
are only invoked from the serial_core (uart_throttle()) if the feature
flags are set.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 14 | ||||
-rw-r--r-- | include/linux/serial_core.h | 2 |
2 files changed, 16 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index a0c1d64..68c44d9 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1319,6 +1319,16 @@ static void serial8250_start_tx(struct uart_port *port) } } +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + static void serial8250_stop_rx(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); @@ -2912,6 +2922,8 @@ static struct uart_ops serial8250_pops = { .get_mctrl = serial8250_get_mctrl, .stop_tx = serial8250_stop_tx, .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, .stop_rx = serial8250_stop_rx, .enable_ms = serial8250_enable_ms, .break_ctl = serial8250_break_ctl, @@ -3462,6 +3474,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->capabilities = up->capabilities; uart->rs485_config = up->rs485_config; uart->rs485 = up->rs485; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; /* Take tx_loadsz from fifosize if it wasn't set separately */ if (uart->port.fifosize && !uart->tx_loadsz) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 204c452..21c2e05 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -125,6 +125,8 @@ struct uart_port { struct ktermios *old); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); + void (*throttle)(struct uart_port *port); + void (*unthrottle)(struct uart_port *port); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); |