Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

8 files changed, 46 insertions, 15 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0ed42d8..93d2c79 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -218,10 +218,10 @@ config ACPI_PROCESSOR_AGGREGATOR
 	depends on X86
 	help
 	  ACPI 4.0 defines processor Aggregator, which enables OS to perform
-	  specfic processor configuration and control that applies to all
+	  specific processor configuration and control that applies to all
 	  processors in the platform. Currently only logical processor idling
 	  is defined, which is to reduce power consumption. This driver
-	  support the new device.
+	  supports the new device.
 
 config ACPI_THERMAL
 	tristate "Thermal Zone"
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 98b9690..b6ed60b 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -245,6 +245,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event)
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  dev_name(&device->dev), event,
 						  (u32) ac->state);
+		acpi_notifier_call_chain(device, event, (u32) ac->state);
 #ifdef CONFIG_ACPI_SYSFS_POWER
 		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
 #endif
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 9335b87..0c9c6a9 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -251,6 +251,9 @@ int acpi_lid_open(void)
 	acpi_status status;
 	unsigned long long state;
 
+	if (!lid_device)
+		return -ENODEV;
+
 	status = acpi_evaluate_integer(lid_device->handle, "_LID", NULL,
 				       &state);
 	if (ACPI_FAILURE(status))
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 3112221..1af8081 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -389,6 +389,17 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
 
 		pbus = pdev->subordinate;
 		pci_dev_put(pdev);
+
+		/*
+		 * This function may be called for a non-PCI device that has a
+		 * PCI parent (eg. a disk under a PCI SATA controller).  In that
+		 * case pdev->subordinate will be NULL for the parent.
+		 */
+		if (!pbus) {
+			dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
+			pdev = NULL;
+			break;
+		}
 	}
 out:
 	list_for_each_entry_safe(node, tmp, &device_list, node)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index f6e54bf..64e3c58 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1109,7 +1109,12 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
 	 */
 
 	/* Does this device support video switching? */
-	if (video->cap._DOS) {
+	if (video->cap._DOS || video->cap._DOD) {
+		if (!video->cap._DOS) {
+			printk(KERN_WARNING FW_BUG
+				"ACPI(%s) defines _DOD but not _DOS\n",
+				acpi_device_bid(video->device));
+		}
 		video->flags.multihead = 1;
 		status = 0;
 	}
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 7032f25..575593a 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -84,7 +84,7 @@ long acpi_is_video_device(struct acpi_device *device)
 		return 0;
 
 	/* Does this device able to support video switching ? */
-	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
 	    ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
 		video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 749e210..d379e74 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -150,6 +150,8 @@ struct eeepc_hotk {
 /* The actual device the driver binds to */
 static struct eeepc_hotk *ehotk;
 
+static void eeepc_rfkill_hotplug(bool real);
+
 /* Platform device/driver */
 static int eeepc_hotk_thaw(struct device *device);
 static int eeepc_hotk_restore(struct device *device);
@@ -343,14 +345,23 @@ static bool eeepc_wlan_rfkill_blocked(void)
 static int eeepc_rfkill_set(void *data, bool blocked)
 {
 	unsigned long asl = (unsigned long)data;
-	return set_acpi(asl, !blocked);
+	int ret;
+
+	if (asl != CM_ASL_WLAN)
+		return set_acpi(asl, !blocked);
+
+	/* hack to avoid panic with rt2860sta */
+	if (blocked)
+		eeepc_rfkill_hotplug(false);
+	ret = set_acpi(asl, !blocked);
+	return ret;
 }
 
 static const struct rfkill_ops eeepc_rfkill_ops = {
 	.set_block = eeepc_rfkill_set,
 };
 
-static void __init eeepc_enable_camera(void)
+static void __devinit eeepc_enable_camera(void)
 {
 	/*
 	 * If the following call to set_acpi() fails, it's because there's no
@@ -643,13 +654,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
 	return 0;
 }
 
-static void eeepc_rfkill_hotplug(void)
+static void eeepc_rfkill_hotplug(bool real)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
-	bool blocked = eeepc_wlan_rfkill_blocked();
+	bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
 
-	if (ehotk->wlan_rfkill)
+	if (real && ehotk->wlan_rfkill)
 		rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
 
 	mutex_lock(&ehotk->hotplug_lock);
@@ -692,7 +703,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 }
 
 static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -850,7 +861,7 @@ static int eeepc_hotk_restore(struct device *device)
 {
 	/* Refresh both wlan rfkill state and pci hotplug */
 	if (ehotk->wlan_rfkill)
-		eeepc_rfkill_hotplug();
+		eeepc_rfkill_hotplug(true);
 
 	if (ehotk->bluetooth_rfkill)
 		rfkill_set_sw_state(ehotk->bluetooth_rfkill,
@@ -993,7 +1004,7 @@ static void eeepc_rfkill_exit(void)
 	 * Refresh pci hotplug in case the rfkill state was changed after
 	 * eeepc_unregister_rfkill_notifier()
 	 */
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 	if (ehotk->hotplug_slot)
 		pci_hp_deregister(ehotk->hotplug_slot);
 
@@ -1109,7 +1120,7 @@ static int eeepc_rfkill_init(struct device *dev)
 	 * Refresh pci hotplug in case the rfkill state was changed during
 	 * setup.
 	 */
-	eeepc_rfkill_hotplug();
+	eeepc_rfkill_hotplug(true);
 
 exit:
 	if (result && result != -ENODEV)
@@ -1189,7 +1200,7 @@ static int eeepc_input_init(struct device *dev)
 	return 0;
 }
 
-static int eeepc_hotk_add(struct acpi_device *device)
+static int __devinit eeepc_hotk_add(struct acpi_device *device)
 {
 	struct device *dev;
 	int result;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index f35aee5..bcd4ba8 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -944,7 +944,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
 	struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
 	struct input_dev *input = fujitsu_hotkey->input;
 
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	if (fujitsu_hotkey->logolamp_registered)
 		led_classdev_unregister(&logolamp_led);