docs: Fix more broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

23 files changed, 41 insertions, 41 deletions

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 7364953..45ac19b 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
-[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 03f8fde..56d603c 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3111a40..3f47040 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 
 Required properties:
 - compatible : shall be one of:
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index d36f07e..0551c78 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -8,7 +8,7 @@ Required properties:
 	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
 			  source (usually MAINPLL) when the original CPU PLL is under
 			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
 - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
 	for detail.
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index d6d2833..fc2bcbe 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -12,7 +12,7 @@ Required properties:
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index 039219d..18a2cde 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -34,7 +34,7 @@ Optional properties:
 - mali-supply : Phandle to regulator for the Mali device. Refer to
   Documentation/devicetree/bindings/regulator/regulator.txt for details.
 
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details.
 
 
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index c1f65d1..63cd911 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -44,7 +44,7 @@ Optional properties:
 
   - memory-region:
     Memory region to allocate from, as defined in
-    Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
 
   - mali-supply:
     Phandle to regulator for the Mali device, as defined in
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index d1df77f..0ebd08a 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
index dd2c065..4d21ffd 100644
--- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -9,7 +9,7 @@ Required properties:
 
 The prcm node may contain several subdevices definitions:
  - see Documentation/devicetree/clk/sunxi.txt for clock devices
- - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
    controller devices
 
 
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index a58c173..0419a63 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
-(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index fd23904..a700943 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -6,7 +6,7 @@ Required properties:
 - compatible: For external switch chips, compatible string must be exactly one
   of: "microchip,ksz9477"
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 
 Examples:
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index a9bc27b..aa3527f 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
 - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
 	 "cpu".
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
 be specified.
 
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index b31d6bb..726ec28 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -14,7 +14,7 @@ Required properties:
   datasheet
 - interrupts: Should contain one interrupt specifier for the GPC interrupt
 - clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
   - ipg
 
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 5d254ab..cfd7465 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
 3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
 4. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
-				Documentation/devicetree/bindings/input/ads7846.txt
+				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 5. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
 6. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
 7. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 50a3153..252a05c 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
 
 Example device nodes:
 
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index cfd31d9..72d16f0 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -53,7 +53,7 @@ bus supply voltage.
 
 The shunt value in micro-ohms can be set via platform data or device tree at
 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
-refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
 if the device tree is used.
 
 Additionally ina226 supports update_interval attribute as described in
diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
index a19db34..22b271d 100644
--- a/Documentation/maintainer/pull-requests.rst
+++ b/Documentation/maintainer/pull-requests.rst
@@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
 
 that will create a signed tag called ``char-misc-4.15-rc1`` based on the
 last commit in the ``char-misc-next`` branch, and sign it with your gpg key
-(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
 
 Linus will only accept pull requests based on a signed tag. Other
 maintainers may differ.
diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
index 624654b..a8197e0 100644
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
     독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
     때문이다.
 
-  :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
+  :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
     이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
     여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
     무엇을 해야 하는지를 설명한다.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0955403..5871dd5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/ili9225.c
-F:	Documentation/devicetree/bindings/display/ili9225.txt
+F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
 
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7586.c
-F:	Documentation/devicetree/bindings/display/st7586.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
 
 DRM DRIVER FOR SITRONIX ST7735R PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7735r.c
-F:	Documentation/devicetree/bindings/display/st7735r.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7735r.txt
 
 DRM DRIVER FOR TDFX VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4824,7 +4824,7 @@ M:	Eric Anholt <eric@anholt.net>
 S:	Supported
 F:	drivers/gpu/drm/v3d/
 F:	include/uapi/drm/v3d_drm.h
-F:	Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
+F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR VC4
@@ -5735,7 +5735,7 @@ M:	Madalin Bucur <madalin.bucur@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/freescale/fman
-F:	Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+F:	Documentation/devicetree/bindings/net/fsl-fman.txt
 
 FREESCALE QORIQ PTP CLOCK DRIVER
 M:	Yangbo Lu <yangbo.lu@nxp.com>
@@ -7425,7 +7425,7 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/gyro/mpu3050*
-F:	Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
+F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
@@ -8700,7 +8700,7 @@ M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
 F:	Documentation/hwmon/max6697
-F:	Documentation/devicetree/bindings/i2c/max6697.txt
+F:	Documentation/devicetree/bindings/hwmon/max6697.txt
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
@@ -9080,7 +9080,7 @@ M:	Martin Donnelly <martin.donnelly@ge.com>
 M:	Martyn Welch <martyn.welch@collabora.co.uk>
 S:	Maintained
 F:	drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
-F:	Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+F:	Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
 
 MEGARAID SCSI/SAS DRIVERS
 M:	Kashyap Desai <kashyap.desai@broadcom.com>
@@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:	Odd Fixes
-F:	Documentation/misc-devices/lcd-panel-cgram.txt
+F:	Documentation/auxdisplay/lcd-panel-cgram.txt
 F:	drivers/misc/panel.c
 
 PARALLEL PORT SUBSYSTEM
@@ -13291,7 +13291,7 @@ M:	Vinod Koul <vkoul@kernel.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Supported
-F:	Documentation/sound/alsa/compress_offload.txt
+F:	Documentation/sound/designs/compress-offload.rst
 F:	include/sound/compress_driver.h
 F:	include/uapi/sound/compress_*
 F:	sound/core/compress_offload.c
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 14d287b..1ab613e 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -33,7 +33,7 @@ config E100
 	  to identify the adapter.
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e100.txt>.
+	  <file:Documentation/networking/e100.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e100.
@@ -49,7 +49,7 @@ config E1000
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
@@ -94,7 +94,7 @@ config IGB
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igb.
@@ -130,7 +130,7 @@ config IGBVF
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igbvf.
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 8974a0f..4b5e250 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1291,7 +1291,7 @@ restore_params:
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 {
@@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_enable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_disable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 {
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 57a27c4..56df483 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -168,7 +168,7 @@ config BINFMT_MISC
 	  will automatically feed it to the correct interpreter.
 
 	  You can do other nice things, too. Read the file
-	  <file:Documentation/binfmt_misc.txt> to learn how to use this
+	  <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
 	  feature, <file:Documentation/admin-guide/java.rst> for information about how
 	  to include Java support. and <file:Documentation/admin-guide/mono.rst> for
           information about how to include Mono-based .NET support.
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 4de1915..4b5fff3 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1997 Richard Günther
  *
  * binfmt_misc detects binaries via a magic or filename extension and invokes
- * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
+ * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt