bugfixes and new hardware support for arcnet driver

The modifications and bug fixes noted below were done by Realtime Control
Works and Contemporary Control Systems, Inc, Jan 2005.  They were
incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb
2007.  <jmorrow@massspec.com>

The changes have been tested on a Contemporary Controls PCI20U-4000.

Summary of changes:

Arc-rawmode.c:
      rx():
      - Fixed error in received packet lengths; 256 byte packets were
        being received as 257 bytes packets.

      prepare_tx():
      - Fixed error in transmit length calcs; 257 byte packets were being
        transmitted as 260 byte packets.

com20020.c:
      com20020_check():
      - We now load the SETUP2 register if the 'clockm' parameter is
        non-zero, instead of checking for ARC_CAN_10MBIT. The user is
        now responsible for whether or not SETUP2 is loaded.  If the
        clock multiplier is non-zero, this means that the user wants a
        baud rate greater than 2.5Mbps. This is not possible unless the
        SETUP2 register is present (COM20020D, or COM20022). So, we're
        relying on the user to be smart about what kind of chip he's
        dealing with...

com20020-pci.c
      - Added several entries to com20020pci_id_table[].

Signed-off-by: Jeff Morrow <jmorrow@massspec.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

4 files changed, 7 insertions, 4 deletions

diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
index e7555d4..6318814 100644
--- a/drivers/net/arcnet/arc-rawmode.c
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -94,7 +94,7 @@ static void rx(struct net_device *dev, int bufnum,
 
 	BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
 
-	if (length >= MinTU)
+	if (length > MTU)
 		ofs = 512 - length;
 	else
 		ofs = 256 - length;
@@ -183,7 +183,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		       length, XMTU);
 		length = XMTU;
 	}
-	if (length > MinTU) {
+	if (length >= MinTU) {
 		hard->offset[0] = 0;
 		hard->offset[1] = ofs = 512 - length;
 	} else if (length > MTU) {
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 4e91dab..83004fd 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -41,7 +41,7 @@
  *     <jojo@repas.de>
  */
 
-#define VERSION "arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.\n"
+#define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n"
 
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 98d326b..b8c0fa6 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -155,6 +155,7 @@ static struct pci_device_id com20020pci_id_table[] = {
 	{ 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
+	{ 0x1571, 0xa00e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
@@ -163,6 +164,8 @@ static struct pci_device_id com20020pci_id_table[] = {
 	{ 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x10B5, 0x9030, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+	{ 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+	{ 0x10B5, 0x2200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{0,}
 };
 
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 4218075..7cf0a25 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -104,7 +104,7 @@ int com20020_check(struct net_device *dev)
 	SET_SUBADR(SUB_SETUP1);
 	outb(lp->setup, _XREG);
 
-	if (lp->card_flags & ARC_CAN_10MBIT)
+	if (lp->clockm != 0)
 	{
 		SET_SUBADR(SUB_SETUP2);
 		outb(lp->setup2, _XREG);