summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJayachandran C <jchandra@broadcom.com>2013-01-14 15:11:57 +0000
committerJohn Crispin <blogic@openwrt.org>2013-02-17 00:15:20 +0100
commit4e45e542cd742c1c3e30e7f252640644c66548b5 (patch)
treed2c744190851b06cf7cd326ff3df16d2a6badae3
parenta69ba6293d11b7dfd395a742f3449d6ddda8ecad (diff)
downloadop-kernel-dev-4e45e542cd742c1c3e30e7f252640644c66548b5.zip
op-kernel-dev-4e45e542cd742c1c3e30e7f252640644c66548b5.tar.gz
MIPS: Netlogic: Use PIC timer as a clocksource
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <blogic@openwrt.org>
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/pic.h12
-rw-r--r--arch/mips/include/asm/netlogic/xlr/pic.h48
-rw-r--r--arch/mips/netlogic/common/irq.c2
-rw-r--r--arch/mips/netlogic/common/time.c52
-rw-r--r--arch/mips/netlogic/xlr/platform.c2
-rw-r--r--arch/mips/netlogic/xlr/setup.c2
6 files changed, 110 insertions, 8 deletions
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index b2e53a5..ea6768c 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -261,6 +261,8 @@
#define PIC_LOCAL_SCHEDULING 1
#define PIC_GLOBAL_SCHEDULING 0
+#define PIC_CLK_HZ 133333333
+
#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r)
#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
@@ -315,6 +317,12 @@ nlm_pic_read_timer(uint64_t base, int timer)
return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
}
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+ return (uint32_t)nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
+}
+
static inline void
nlm_pic_write_timer(uint64_t base, int timer, uint64_t value)
{
@@ -376,9 +384,9 @@ nlm_pic_ack(uint64_t base, int irt_num)
}
static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
{
- nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, hwt);
+ nlm_pic_write_irt_direct(base, irt, en, 0, 0, irq, hwt);
}
int nlm_irq_to_irt(int irq);
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
index 9a691b1..effa337 100644
--- a/arch/mips/include/asm/netlogic/xlr/pic.h
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -35,10 +35,11 @@
#ifndef _ASM_NLM_XLR_PIC_H
#define _ASM_NLM_XLR_PIC_H
-#define PIC_CLKS_PER_SEC 66666666ULL
+#define PIC_CLK_HZ 66666666
/* PIC hardware interrupt numbers */
#define PIC_IRT_WD_INDEX 0
#define PIC_IRT_TIMER_0_INDEX 1
+#define PIC_IRT_TIMER_INDEX(i) ((i) + PIC_IRT_TIMER_0_INDEX)
#define PIC_IRT_TIMER_1_INDEX 2
#define PIC_IRT_TIMER_2_INDEX 3
#define PIC_IRT_TIMER_3_INDEX 4
@@ -99,6 +100,7 @@
/* PIC Registers */
#define PIC_CTRL 0x00
+#define PIC_CTRL_STE 8 /* timer enable start bit */
#define PIC_IPI 0x04
#define PIC_INT_ACK 0x06
@@ -251,12 +253,52 @@ nlm_pic_ack(uint64_t base, int irt)
}
static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
{
nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt));
/* local scheduling, invalid, level by default */
nlm_write_reg(base, PIC_IRT_1(irt),
- (1 << 30) | (1 << 6) | irq);
+ (en << 30) | (1 << 6) | irq);
+}
+
+static inline uint64_t
+nlm_pic_read_timer(uint64_t base, int timer)
+{
+ uint32_t up1, up2, low;
+
+ up1 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+ low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+ up2 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+
+ if (up1 != up2) /* wrapped, get the new low */
+ low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+ return ((uint64_t)up2 << 32) | low;
+
+}
+
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+ return nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+}
+
+static inline void
+nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
+{
+ uint32_t up, low;
+ uint64_t pic_ctrl = nlm_read_reg(base, PIC_CTRL);
+ int en;
+
+ en = (irq > 0);
+ up = value >> 32;
+ low = value & 0xFFFFFFFF;
+ nlm_write_reg(base, PIC_TIMER_MAXVAL_0(timer), low);
+ nlm_write_reg(base, PIC_TIMER_MAXVAL_1(timer), up);
+ nlm_pic_init_irt(base, PIC_IRT_TIMER_INDEX(timer), irq, cpu, 0);
+
+ /* enable the timer */
+ pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
+ nlm_write_reg(base, PIC_CTRL, pic_ctrl);
}
#endif
#endif /* _ASM_NLM_XLR_PIC_H */
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index d42cd1a..642f1e4 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -217,7 +217,7 @@ static void nlm_init_node_irqs(int node)
nlm_setup_pic_irq(node, i, i, irt);
/* set interrupts to first cpu in node */
nlm_pic_init_irt(nodep->picbase, irt, i,
- node * NLM_CPUS_PER_NODE);
+ node * NLM_CPUS_PER_NODE, 0);
irqmask |= (1ull << i);
}
nodep->irqmask = irqmask;
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index bd3e498..20f89bc 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -35,16 +35,68 @@
#include <linux/init.h>
#include <asm/time.h>
+#include <asm/cpu-features.h>
+
#include <asm/netlogic/interrupt.h>
#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#elif defined(CONFIG_CPU_XLR)
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+#else
+#error "Unknown CPU"
+#endif
unsigned int __cpuinit get_c0_compare_int(void)
{
return IRQ_TIMER;
}
+static cycle_t nlm_get_pic_timer(struct clocksource *cs)
+{
+ uint64_t picbase = nlm_get_node(0)->picbase;
+
+ return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER);
+}
+
+static cycle_t nlm_get_pic_timer32(struct clocksource *cs)
+{
+ uint64_t picbase = nlm_get_node(0)->picbase;
+
+ return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER);
+}
+
+static struct clocksource csrc_pic = {
+ .name = "PIC",
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void nlm_init_pic_timer(void)
+{
+ uint64_t picbase = nlm_get_node(0)->picbase;
+
+ nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
+ if (current_cpu_data.cputype == CPU_XLR) {
+ csrc_pic.mask = CLOCKSOURCE_MASK(32);
+ csrc_pic.read = nlm_get_pic_timer32;
+ } else {
+ csrc_pic.mask = CLOCKSOURCE_MASK(64);
+ csrc_pic.read = nlm_get_pic_timer;
+ }
+ csrc_pic.rating = 1000;
+ clocksource_register_hz(&csrc_pic, PIC_CLK_HZ);
+}
+
void __init plat_time_init(void)
{
+ nlm_init_pic_timer();
mips_hpt_frequency = nlm_get_cpu_frequency();
pr_info("MIPS counter frequency [%ld]\n",
(unsigned long)mips_hpt_frequency);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 507230e..ce838f9 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -64,7 +64,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
.iotype = UPIO_MEM32, \
.flags = (UPF_SKIP_TEST | \
UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
- .uartclk = PIC_CLKS_PER_SEC, \
+ .uartclk = PIC_CLK_HZ, \
.type = PORT_16550A, \
.serial_in = nlm_xlr_uart_in, \
.serial_out = nlm_xlr_uart_out, \
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index c5ce699..54b301c 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -70,7 +70,7 @@ static void __init nlm_early_serial_setup(void)
s.iotype = UPIO_MEM32;
s.regshift = 2;
s.irq = PIC_UART_0_IRQ;
- s.uartclk = PIC_CLKS_PER_SEC;
+ s.uartclk = PIC_CLK_HZ;
s.serial_in = nlm_xlr_uart_in;
s.serial_out = nlm_xlr_uart_out;
s.mapbase = uart_base;
OpenPOWER on IntegriCloud