diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-02-08 15:20:40 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-02-08 15:20:40 -0800 |
commit | cce0cac125623f9b68f25dd1350f6d616220a8dd (patch) | |
tree | 123a4dd9f040d05e42cadb6b01f301d6863b897f | |
parent | f564c5fe29d3fa9adc6d839714521b0554c62598 (diff) | |
parent | 18f49ea207fbcf37f81395037f0dc1cacb2aac3c (diff) | |
download | op-kernel-dev-cce0cac125623f9b68f25dd1350f6d616220a8dd.zip op-kernel-dev-cce0cac125623f9b68f25dd1350f6d616220a8dd.tar.gz |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Manual conflict merge of arch/arm/Kconfig
33 files changed, 347 insertions, 137 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4a63a8e..15dc1a0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,9 +10,9 @@ config ARM default y help The ARM series is a line of low-power-consumption RISC chip designs - licensed by ARM ltd and targeted at embedded applications and + licensed by ARM Ltd and targeted at embedded applications and handhelds such as the Compaq IPAQ. ARM-based PCs are no longer - manufactured, but legacy ARM-based PC hardware remains popular in + manufactured, but legacy ARM-based PC hardware remains popular in Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. @@ -84,45 +84,62 @@ config ARCH_CLPS7500 bool "Cirrus-CL-PS7500FE" select TIMER_ACORN select ISA + help + Support for the Cirrus Logic PS7500FE system-on-a-chip. config ARCH_CLPS711X bool "CLPS711x/EP721x-based" + help + Support for Cirrus Logic 711x/721x based boards. config ARCH_CO285 bool "Co-EBSA285" select FOOTBRIDGE select FOOTBRIDGE_ADDIN + help + Support for Intel's EBSA285 companion chip. config ARCH_EBSA110 bool "EBSA-110" select ISA help This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an onboard + from Digital. It has limited hardware on-board, including an Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. config ARCH_INTEGRATOR bool "Integrator" select ARM_AMBA select ICST525 + help + Support for ARM's Integrator platform. config ARCH_IOP3XX bool "IOP3xx-based" select PCI + help + Support for Intel's IOP3XX (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" select DMABOUNCE select PCI + help + Support for Intel's IXP4XX (XScale) family of processors. config ARCH_IXP2000 bool "IXP2400/2800-based" select PCI + help + Support for Intel's IXP2400/2800 (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" @@ -140,6 +157,8 @@ config ARCH_L7200 config ARCH_PXA bool "PXA2xx-based" select ARCH_MTD_XIP + help + Support for Intel's PXA2XX processor line. config ARCH_RPC bool "RiscPC" @@ -157,19 +176,24 @@ config ARCH_SA1100 select ISA select ARCH_DISCONTIGMEM_ENABLE select ARCH_MTD_XIP + help + Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derviatives). + the Samsung SMDK2410 development board (and derivatives). config ARCH_SHARK bool "Shark" select ISA select ISA_DMA select PCI + help + Support for the StrongARM based Digital DNARD machine, also known + as "Shark" (<http://www.shark-linux.de/shark.html>). config ARCH_LH7A40X bool "Sharp LH7A40X" @@ -181,6 +205,8 @@ config ARCH_LH7A40X config ARCH_OMAP bool "TI OMAP" + help + Support for TI's OMAP platform (OMAP1 and OMAP2). config ARCH_VERSATILE bool "Versatile" @@ -199,6 +225,8 @@ config ARCH_REALVIEW config ARCH_IMX bool "IMX" + help + Support for Motorola's i.MX family of processors (MX1, MXL). config ARCH_H720X bool "Hynix-HMS720x-based" @@ -215,8 +243,8 @@ config ARCH_AAEC2000 config ARCH_AT91RM9200 bool "AT91RM9200" help - Say Y here if you intend to run this kernel on an AT91RM9200-based - board. + Say Y here if you intend to run this kernel on an Atmel + AT91RM9200-based board. endchoice @@ -422,8 +450,8 @@ config AEABI To use this you need GCC version 4.0.0 or later. config OABI_COMPAT - bool "Allow old ABI binaries to run with this kernel" - depends on AEABI + bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" + depends on AEABI && EXPERIMENTAL default y help This option preserves the old syscall interface along with the diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 9592e39..5fdaf3c 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index d9d6bb8..c67fc44 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 2dc9d49..60d66e8 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index ea8f4b4..f54f3dc 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1964ccd..6695b07 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,11 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc1 -# Sun Nov 13 17:41:24 2005 +# Linux kernel version: 2.6.16-rc2 +# Mon Feb 6 11:17:23 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -28,27 +27,31 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -102,6 +105,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set # # S3C24XX Implementations @@ -160,7 +164,6 @@ CONFIG_CPU_TLB_V4WBI=y # Bus support # CONFIG_ISA=y -CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -172,6 +175,7 @@ CONFIG_ISA_DMA_API=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -214,6 +218,8 @@ CONFIG_BINFMT_AOUT=y # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set CONFIG_APM=y # @@ -259,6 +265,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -276,7 +287,6 @@ CONFIG_TCP_CONG_BIC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -300,6 +310,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -412,8 +427,6 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -502,7 +515,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y @@ -607,11 +619,11 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set -# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -625,6 +637,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -687,6 +700,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # @@ -731,6 +745,12 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -863,6 +883,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y @@ -897,6 +918,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -965,6 +987,7 @@ CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1020,12 +1043,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1034,6 +1058,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index d058e7c..8c3035d 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -291,21 +291,21 @@ CALL(sys_mq_getsetattr) /* 280 */ CALL(sys_waitid) CALL(sys_socket) - CALL(sys_bind) - CALL(sys_connect) + CALL(ABI(sys_bind, sys_oabi_bind)) + CALL(ABI(sys_connect, sys_oabi_connect)) CALL(sys_listen) /* 285 */ CALL(sys_accept) CALL(sys_getsockname) CALL(sys_getpeername) CALL(sys_socketpair) CALL(sys_send) -/* 290 */ CALL(sys_sendto) +/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto)) CALL(sys_recv) CALL(sys_recvfrom) CALL(sys_shutdown) CALL(sys_setsockopt) /* 295 */ CALL(sys_getsockopt) - CALL(sys_sendmsg) + CALL(ABI(sys_sendmsg, sys_oabi_sendmsg)) CALL(sys_recvmsg) CALL(ABI(sys_semop, sys_oabi_semop)) CALL(sys_semget) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d401d90..964cd71 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -333,10 +333,14 @@ __pabt_svc: @ from the exception stack #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#ifndef CONFIG_MMU +#warning "NPTL on non MMU needs fixing" +#else @ make sure our user space atomic helper is aborted cmp r2, #TASK_SIZE bichs r3, r3, #PSR_Z_BIT #endif +#endif @ @ We are now ready to fill in the remaining blanks on the stack: @@ -705,7 +709,12 @@ __kuser_memory_barrier: @ 0xffff0fa0 * The C flag is also set if *ptr was changed to allow for assembly * optimization in the calling code. * - * Note: this routine already includes memory barriers as needed. + * Notes: + * + * - This routine already includes memory barriers as needed. + * + * - A failure might be transient, i.e. it is possible, although unlikely, + * that "failure" be returned even if *ptr == oldval. * * For example, a user space atomic_add implementation could look like this: * @@ -756,12 +765,18 @@ __kuser_cmpxchg: @ 0xffff0fc0 * exception happening just after the str instruction which would * clear the Z flag although the exchange was done. */ +#ifdef CONFIG_MMU teq ip, ip @ set Z flag ldr ip, [r2] @ load current val add r3, r2, #1 @ prepare store ptr teqeq ip, r0 @ compare with oldval if still allowed streq r1, [r3, #-1]! @ store newval if still allowed subs r0, r2, r3 @ if r2 == r3 the str occured +#else +#warning "NPTL on non MMU needs fixing" + mov r0, #-1 + adds r0, r0, #0 +#endif mov pc, lr #else diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index eafa8e5..9d4b764 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -59,6 +59,16 @@ * struct sembuf loses its padding with EABI. Since arrays of them are * used they have to be copyed to remove the padding. Compatibility wrappers * provided below. + * + * sys_bind: + * sys_connect: + * sys_sendmsg: + * sys_sendto: + * + * struct sockaddr_un loses its padding with EABI. Since the size of the + * structure is used as a validation test in unix_mkname(), we need to + * change the length argument to 110 whenever it is 112. Compatibility + * wrappers provided below. */ #include <linux/syscalls.h> @@ -67,6 +77,7 @@ #include <linux/fcntl.h> #include <linux/eventpoll.h> #include <linux/sem.h> +#include <linux/socket.h> #include <asm/ipc.h> #include <asm/uaccess.h> @@ -337,3 +348,63 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third, return sys_ipc(call, first, second, third, ptr, fifth); } } + +asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_bind(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_connect(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_sendto(int fd, void __user *buff, + size_t len, unsigned flags, + struct sockaddr __user *addr, + int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_sendto(fd, buff, len, flags, addr, addrlen); +} + +asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) +{ + struct sockaddr __user *addr; + int msg_namelen; + sa_family_t sa_family; + if (msg && + get_user(msg_namelen, &msg->msg_namelen) == 0 && + msg_namelen == 112 && + get_user(addr, &msg->msg_name) == 0 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + { + /* + * HACK ALERT: there is a limit to how much backward bending + * we should do for what is actually a transitional + * compatibility layer. This already has known flaws with + * a few ioctls that we don't intend to fix. Therefore + * consider this blatent hack as another one... and take care + * to run for cover. In most cases it will "just work fine". + * If it doesn't, well, tough. + */ + put_user(110, &msg->msg_namelen); + } + return sys_sendmsg(fd, msg, flags); +} + diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf..0e2b641 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -24,6 +24,8 @@ config ARCH_CEIVA config ARCH_CLEP7312 bool "CLEP7312" + help + Boards based on the Cirrus Logic 7212/7312 chips. config ARCH_EDB7211 bool "EDB7211" diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 9e5a13b..52fac89 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } static inline int enp2611_pci_valid_device(struct pci_bus *bus, diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 7c78240..0910127 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 10f0660..150519f 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) @@ -299,7 +300,9 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); + if (machine_is_ixdp2401() || machine_is_ixdp2801()) + pci_common_init(&ixdp2x01_pci); + return 0; } diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index bdc20b5..a177e78 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -30,6 +30,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -104,7 +105,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9533c36..89f0cc7 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -128,6 +128,7 @@ static void __init h2_init_smc91x(void) static void __init h2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h2_init_smc91x(); @@ -194,7 +195,7 @@ static void __init h2_init(void) static void __init h2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index d665efc..d9f3862 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -203,6 +203,7 @@ static void __init h3_init_smc91x(void) void h3_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h3_init_smc91x(); @@ -210,7 +211,7 @@ void h3_init_irq(void) static void __init h3_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 652f37c..a04e433 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -181,6 +181,7 @@ static void __init innovator_init_smc91x(void) void innovator_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); #ifdef CONFIG_ARCH_OMAP15XX @@ -285,7 +286,7 @@ static void __init innovator_init(void) static void __init innovator_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 58f7839..60d5f8a 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -65,6 +65,7 @@ static struct omap_board_config_kernel netstar_config[] = { static void __init netstar_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -108,7 +109,7 @@ static void __init netstar_init(void) static void __init netstar_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e5d126e..543fa13 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -169,6 +169,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); osk_init_smc91x(); @@ -269,7 +270,7 @@ static void __init osk_init(void) static void __init osk_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 67fada2..e488f72 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,6 +34,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -72,7 +73,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 88708a0..3913a3c 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -144,6 +144,7 @@ static void __init perseus2_init_smc91x(void) void omap_perseus2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); perseus2_init_smc91x(); @@ -160,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 959b4b8..bfd5fdd 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,6 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -206,7 +207,7 @@ static void __init voiceblue_init(void) static void __init voiceblue_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a7a19f7..82d556b 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <asm/tlb.h> #include <asm/mach/map.h> #include <asm/io.h> #include <asm/arch/mux.h> @@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -static int initialized = 0; - -static void __init _omap_map_io(void) +/* + * Maps common IO regions for omap1. This should only get called from + * board specific init. + */ +void __init omap1_map_common_io(void) { - initialized = 1; - - /* We have to initialize the IO space mapping before we can run - * cpu_is_omapxxx() macros. */ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); + + /* Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* We want to check CPU revision early for cpu_is_omapxxxx() macros. + * IO space mapping must be initialized before we can do that. + */ omap_check_revision(); #ifdef CONFIG_ARCH_OMAP730 @@ -111,7 +121,14 @@ static void __init _omap_map_io(void) #endif omap_sram_init(); +} +/* + * Common low-level hardware init for omap1. This should only get called from + * board specific init. + */ +void __init omap1_init_common_hw() +{ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -121,16 +138,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); -} -/* - * This should only get called from board specific init - */ -void __init omap_map_common_io(void) -{ - if (!initialized) { - _omap_map_io(); - omap1_mux_init(); - } + omap1_mux_init(); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b937123..eaecbf4 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,6 +33,7 @@ static void __init omap_generic_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); } @@ -64,7 +65,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index c3c35d4..a300d63 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -136,6 +136,7 @@ static inline void __init h4_init_smc91x(void) static void __init omap_h4_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); h4_init_smc91x(); @@ -181,7 +182,7 @@ static void __init omap_h4_init(void) static void __init omap_h4_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_H4, "OMAP2420 H4 board") diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 4a222f5..4303d98 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -182,7 +182,7 @@ static const struct icst307_params realview_oscvco_params = { static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; u32 val; val = readl(sys_osc) & ~0x7ffff; diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index af2f3d5..08489ef 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -40,7 +40,6 @@ #include <linux/mutex.h> #include <asm/hardware.h> -#include <asm/atomic.h> #include <asm/irq.h> #include <asm/io.h> @@ -59,22 +58,18 @@ static DEFINE_MUTEX(clocks_mutex); void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable) { unsigned long clkcon; - unsigned long flags; - - local_irq_save(flags); clkcon = __raw_readl(S3C2410_CLKCON); - clkcon &= ~clocks; if (enable) clkcon |= clocks; + else + clkcon &= ~clocks; /* ensure none of the special function bits set */ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); __raw_writel(clkcon, S3C2410_CLKCON); - - local_irq_restore(flags); } /* enable and disable calls for use with the clk struct */ @@ -138,16 +133,32 @@ void clk_put(struct clk *clk) int clk_enable(struct clk *clk) { - if (IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) return -EINVAL; - return (clk->enable)(clk, 1); + clk_enable(clk->parent); + + mutex_lock(&clocks_mutex); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + mutex_unlock(&clocks_mutex); + return 0; } void clk_disable(struct clk *clk) { - if (!IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) + return; + + mutex_lock(&clocks_mutex); + + if ((--clk->usage) == 0) (clk->enable)(clk, 0); + + mutex_unlock(&clocks_mutex); + clk_disable(clk->parent); } @@ -361,6 +372,14 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; + /* if this is a standard clock, set the usage state */ + + if (clk->ctrlbit) { + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + + clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; + } + /* add to the list of available clocks */ mutex_lock(&clocks_mutex); @@ -402,6 +421,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, * the LCD clock if it is not needed. */ + mutex_lock(&clocks_mutex); + s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0); @@ -409,6 +430,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0); s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0); + mutex_unlock(&clocks_mutex); + /* assume uart clocks are correctly setup */ /* register our clocks */ diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 177d5c8..eb5c95d 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -16,6 +16,7 @@ struct clk { struct clk *parent; const char *name; int id; + int usage; unsigned long rate; unsigned long ctrlbit; int (*enable)(struct clk *, int enable); diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index b8d994a..0a47d38 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -275,6 +275,11 @@ static struct resource s3c_adc_resource[] = { }, [1] = { .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, .end = IRQ_ADC, .flags = IORESOURCE_IRQ, } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 792f663..ee82763 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <asm/mach/map.h> +#include <asm/tlb.h> #include <asm/io.h> #include <asm/cacheflush.h> @@ -96,6 +97,14 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].length); /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but since we're called from map_io(), we + * must do it here. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 0a2dd6c..7410e09 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -161,7 +161,11 @@ s3c24xx_serial_dbg(const char *fmt, ...) /* we can support 3 uarts, but not always use them */ +#ifdef CONFIG_CPU_S3C2400 +#define NR_PORTS (2) +#else #define NR_PORTS (3) +#endif /* port irq numbers */ diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index f5bcc9a..b726acf 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -116,7 +116,11 @@ typedef struct { volatile u32 offset[4096]; } __regbase32; ->offset[((vaddr)&4095)>>2] #define __REG32(paddr) __REGV32(io_p2v(paddr)) -extern void omap_map_common_io(void); +extern void omap1_map_common_io(void); +extern void omap1_init_common_hw(void); + +extern void omap2_map_common_io(void); +extern void omap2_init_common_hw(void); #else diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h index 6caa59f..cb29d84 100644 --- a/include/asm-arm/mutex.h +++ b/include/asm-arm/mutex.h @@ -23,72 +23,71 @@ * simply bail out immediately through the slow path where the lock will be * reattempted until it succeeds. */ -#define __mutex_fastpath_lock(count, fail_fn) \ -do { \ - int __ex_flag, __res; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%2] \n" \ - "sub %0, %0, #1 \n" \ - "strex %1, %0, [%2] \n" \ - \ - : "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - if (unlikely(__res || __ex_flag)) \ - fail_fn(count); \ -} while (0) - -#define __mutex_fastpath_lock_retval(count, fail_fn) \ -({ \ - int __ex_flag, __res; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall int (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%2] \n" \ - "sub %0, %0, #1 \n" \ - "strex %1, %0, [%2] \n" \ - \ - : "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - __res |= __ex_flag; \ - if (unlikely(__res != 0)) \ - __res = fail_fn(count); \ - __res; \ -}) +static inline void +__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + fail_fn(count); +} + +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + __res = fail_fn(count); + return __res; +} /* * Same trick is used for the unlock fast path. However the original value, * rather than the result, is used to test for success in order to have * better generated assembly. */ -#define __mutex_fastpath_unlock(count, fail_fn) \ -do { \ - int __ex_flag, __res, __orig; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%3] \n" \ - "add %1, %0, #1 \n" \ - "strex %2, %1, [%3] \n" \ - \ - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - if (unlikely(__orig || __ex_flag)) \ - fail_fn(count); \ -} while (0) +static inline void +__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "ldrex %0, [%3] \n\t" + "add %1, %0, #1 \n\t" + "strex %2, %1, [%3] " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __orig |= __ex_flag; + if (unlikely(__orig != 0)) + fail_fn(count); +} /* * If the unlock was done on a contended lock, or if the unlock simply fails @@ -110,12 +109,12 @@ __mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) __asm__ ( - "1: ldrex %0, [%3] \n" - "subs %1, %0, #1 \n" - "strexeq %2, %1, [%3] \n" - "movlt %0, #0 \n" - "cmpeq %2, #0 \n" - "bgt 1b \n" + "1: ldrex %0, [%3] \n\t" + "subs %1, %0, #1 \n\t" + "strexeq %2, %1, [%3] \n\t" + "movlt %0, #0 \n\t" + "cmpeq %2, #0 \n\t" + "bgt 1b " : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) : "r" (&count->counter) |