Merge tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull more MFD updates from Lee Jones:
 "I missed collecting these patches due to a branch/tag naming
  ambiguity.  Completely my own fault, as I mindlessly named a branch
  and tag identically.  Sorry for the fuss.

  This pull-request contains some misplaced patches from Tony Lindgren
  that should have been part of the initial one"

* tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle
  mfd: twl4030-power: Add support for board specific configuration
  mfd: twl4030-power: Add recommended idle configuration
  mfd: twl4030-power: Add generic reset configuration
  mfd: twl4030-power: Fix some defines for SW_EVENTS
  mfd: twl4030-power: Fix hang on reboot if sleep configuration was loaded earlier

3 files changed, 281 insertions, 26 deletions

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index 8e15ec3..b9ee7b9 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -5,7 +5,22 @@ to control the power resources, including power scripts. For now, the
 binding only supports the complete shutdown of the system after poweroff.
 
 Required properties:
-- compatible : must be "ti,twl4030-power"
+- compatible : must be one of the following
+	"ti,twl4030-power"
+	"ti,twl4030-power-reset"
+	"ti,twl4030-power-idle"
+	"ti,twl4030-power-idle-osc-off"
+
+The use of ti,twl4030-power-reset is recommended at least on
+3530 that needs a special configuration for warm reset to work.
+
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
+When using ti,twl4030-power-idle-osc-off, the TI recommended
+configuration is used with the external oscillator being shut
+down during off-idle. Note that this does not work on all boards
+depending on how the external oscillator is wired.
 
 Optional properties:
 - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 96162b6..3bc969a 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -29,13 +29,21 @@
 #include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/mach-types.h>
 
 static u8 twl4030_start_script_address = 0x2b;
 
-#define PWR_P1_SW_EVENTS	0x10
-#define PWR_DEVOFF		(1 << 0)
+/* Register bits for P1, P2 and P3_SW_EVENTS */
+#define PWR_STOPON_PRWON	BIT(6)
+#define PWR_STOPON_SYSEN	BIT(5)
+#define PWR_ENABLE_WARMRESET	BIT(4)
+#define PWR_LVL_WAKEUP		BIT(3)
+#define PWR_DEVACT		BIT(2)
+#define PWR_DEVSLP		BIT(1)
+#define PWR_DEVOFF		BIT(0)
+
 #define SEQ_OFFSYNC		(1 << 0)
 
 #define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
@@ -52,10 +60,6 @@ static u8 twl4030_start_script_address = 0x2b;
 #define R_CFG_P2_TRANSITION	PHY_TO_OFF_PM_MASTER(0x37)
 #define R_CFG_P3_TRANSITION	PHY_TO_OFF_PM_MASTER(0x38)
 
-#define LVL_WAKEUP	0x08
-
-#define ENABLE_WARMRESET (1<<4)
-
 #define END_OF_SCRIPT		0x3f
 
 #define R_SEQ_ADD_A2S		PHY_TO_OFF_PM_MASTER(0x55)
@@ -125,6 +129,53 @@ static u8 res_config_addrs[] = {
 	[RES_MAIN_REF]	= 0x94,
 };
 
+/*
+ * Usable values for .remap_sleep and .remap_off
+ * Based on table "5.3.3 Resource Operating modes"
+ */
+enum {
+	TWL_REMAP_OFF = 0,
+	TWL_REMAP_SLEEP = 8,
+	TWL_REMAP_ACTIVE = 9,
+};
+
+/*
+ * Macros to configure the PM register states for various resources.
+ * Note that we can make MSG_SINGULAR etc private to this driver once
+ * omap3 has been made DT only.
+ */
+#define TWL_DFLT_DELAY		2	/* typically 2 32 KiHz cycles */
+#define TWL_DEV_GRP_P123	(DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3)
+#define TWL_RESOURCE_SET(res, state)					\
+	{ MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY }
+#define TWL_RESOURCE_ON(res)	TWL_RESOURCE_SET(res, RES_STATE_ACTIVE)
+#define TWL_RESOURCE_OFF(res)	TWL_RESOURCE_SET(res, RES_STATE_OFF)
+#define TWL_RESOURCE_RESET(res)	TWL_RESOURCE_SET(res, RES_STATE_WRST)
+/*
+ * It seems that type1 and type2 is just the resource init order
+ * number for the type1 and type2 group.
+ */
+#define TWL_RESOURCE_SET_ACTIVE(res, state)			       	\
+	{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) }
+#define TWL_RESOURCE_GROUP_RESET(group, type1, type2)			\
+	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2),	\
+		RES_STATE_WRST), TWL_DFLT_DELAY }
+#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2)			\
+	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2),		\
+		RES_STATE_SLEEP), TWL_DFLT_DELAY }
+#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2)			\
+	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2),		\
+		RES_STATE_ACTIVE), TWL_DFLT_DELAY }
+#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2)				\
+	{ .resource = (res), .devgroup = (devgrp),			\
+	  .type = (typ), .type2 = (typ2),				\
+	  .remap_off = TWL_REMAP_OFF,					\
+	  .remap_sleep = TWL_REMAP_SLEEP, }
+#define TWL_REMAP_OFF(res, devgrp, typ, typ2)				\
+	{ .resource = (res), .devgroup = (devgrp),			\
+	  .type = (typ), .type2 = (typ2),				\
+	  .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, }
+
 static int twl4030_write_script_byte(u8 address, u8 byte)
 {
 	int err;
@@ -196,7 +247,7 @@ static int twl4030_config_wakeup3_sequence(u8 address)
 	err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS);
 	if (err)
 		goto out;
-	data |= LVL_WAKEUP;
+	data |= PWR_LVL_WAKEUP;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P3_SW_EVENTS);
 out:
 	if (err)
@@ -219,7 +270,7 @@ static int twl4030_config_wakeup12_sequence(u8 address)
 	if (err)
 		goto out;
 
-	data |= LVL_WAKEUP;
+	data |= PWR_LVL_WAKEUP;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P1_SW_EVENTS);
 	if (err)
 		goto out;
@@ -228,7 +279,7 @@ static int twl4030_config_wakeup12_sequence(u8 address)
 	if (err)
 		goto out;
 
-	data |= LVL_WAKEUP;
+	data |= PWR_LVL_WAKEUP;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P2_SW_EVENTS);
 	if (err)
 		goto out;
@@ -281,7 +332,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
 	if (err)
 		goto out;
 
-	rd_data |= ENABLE_WARMRESET;
+	rd_data |= PWR_ENABLE_WARMRESET;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS);
 	if (err)
 		goto out;
@@ -290,7 +341,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
 	if (err)
 		goto out;
 
-	rd_data |= ENABLE_WARMRESET;
+	rd_data |= PWR_ENABLE_WARMRESET;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS);
 	if (err)
 		goto out;
@@ -299,7 +350,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
 	if (err)
 		goto out;
 
-	rd_data |= ENABLE_WARMRESET;
+	rd_data |= PWR_ENABLE_WARMRESET;
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS);
 out:
 	if (err)
@@ -421,6 +472,12 @@ static int load_twl4030_script(struct twl4030_script *tscript,
 			goto out;
 	}
 	if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
+		/* Reset any existing sleep script to avoid hangs on reboot */
+		err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT,
+				       R_SEQ_ADD_A2S);
+		if (err)
+			goto out;
+
 		err = twl4030_config_wakeup12_sequence(address);
 		if (err)
 			goto out;
@@ -493,7 +550,8 @@ int twl4030_remove_script(u8 flags)
 	return err;
 }
 
-static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
+static int
+twl4030_power_configure_scripts(const struct twl4030_power_data *pdata)
 {
 	int err;
 	int i;
@@ -509,12 +567,34 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
 	return 0;
 }
 
-static int twl4030_power_configure_resources(struct twl4030_power_data *pdata)
+static void twl4030_patch_rconfig(struct twl4030_resconfig *common,
+				  struct twl4030_resconfig *board)
+{
+	while (common->resource) {
+		struct twl4030_resconfig *b = board;
+
+		while (b->resource) {
+			if (b->resource == common->resource) {
+				*common = *b;
+				break;
+			}
+			b++;
+		}
+		common++;
+	}
+}
+
+static int
+twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
 {
 	struct twl4030_resconfig *resconfig = pdata->resource_config;
+	struct twl4030_resconfig *boardconf = pdata->board_config;
 	int err;
 
 	if (resconfig) {
+		if (boardconf)
+			twl4030_patch_rconfig(resconfig, boardconf);
+
 		while (resconfig->resource) {
 			err = twl4030_configure_resource(resconfig);
 			if (err)
@@ -541,7 +621,7 @@ void twl4030_power_off(void)
 		pr_err("TWL4030 Unable to power off\n");
 }
 
-static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
+static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
 					struct device_node *node)
 {
 	if (pdata && pdata->use_poweroff)
@@ -553,10 +633,170 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
 	return false;
 }
 
+#ifdef CONFIG_OF
+
+/* Generic warm reset configuration for omap3 */
+
+static struct twl4030_ins omap3_wrst_seq[] = {
+	TWL_RESOURCE_OFF(RES_NRES_PWRON),
+	TWL_RESOURCE_OFF(RES_RESET),
+	TWL_RESOURCE_RESET(RES_MAIN_REF),
+	TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2),
+	TWL_RESOURCE_RESET(RES_VUSB_3V1),
+	TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1),
+	TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0),
+	TWL_RESOURCE_ON(RES_RESET),
+	TWL_RESOURCE_ON(RES_NRES_PWRON),
+};
+
+static struct twl4030_script omap3_wrst_script = {
+	.script	= omap3_wrst_seq,
+	.size	= ARRAY_SIZE(omap3_wrst_seq),
+	.flags	= TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *omap3_reset_scripts[] = {
+	&omap3_wrst_script,
+};
+
+static struct twl4030_resconfig omap3_rconfig[] = {
+	TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1),
+	TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1),
+	TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1),
+	{ 0, 0 },
+};
+
+static struct twl4030_power_data omap3_reset = {
+	.scripts		= omap3_reset_scripts,
+	.num			= ARRAY_SIZE(omap3_reset_scripts),
+	.resource_config	= omap3_rconfig,
+};
+
+/* Recommended generic default idle configuration for off-idle */
+
+/* Broadcast message to put res to sleep */
+static struct twl4030_ins omap3_idle_sleep_on_seq[] = {
+	TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_sleep_on_script = {
+	.script	= omap3_idle_sleep_on_seq,
+	.size	= ARRAY_SIZE(omap3_idle_sleep_on_seq),
+	.flags	= TWL4030_SLEEP_SCRIPT,
+};
+
+/* Broadcast message to put res to active */
+static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = {
+	TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_wakeup_p12_script = {
+	.script	= omap3_idle_wakeup_p12_seq,
+	.size	= ARRAY_SIZE(omap3_idle_wakeup_p12_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+/* Broadcast message to put res to active */
+static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = {
+	TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37),
+	TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_wakeup_p3_script = {
+	.script	= omap3_idle_wakeup_p3_seq,
+	.size	= ARRAY_SIZE(omap3_idle_wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_script *omap3_idle_scripts[] = {
+	&omap3_idle_wakeup_p12_script,
+	&omap3_idle_wakeup_p3_script,
+	&omap3_wrst_script,
+	&omap3_idle_sleep_on_script,
+};
+
+/*
+ * Recommended configuration based on "Recommended Sleep
+ * Sequences for the Zoom Platform":
+ * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf
+ * Note that the type1 and type2 seem to be just the init order number
+ * for type1 and type2 groups as specified in the document mentioned
+ * above.
+ */
+static struct twl4030_resconfig omap3_idle_rconfig[] = {
+	TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1),
+	TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0),
+	TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2),
+	TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2),
+	TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2),
+	TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2),
+	TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1),
+	TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1),
+	TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0),
+	/* Resource #20 USB charge pump skipped */
+	TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1),
+	TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1),
+	TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2),
+	TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1),
+	TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2),
+	TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0),
+	TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0),
+	TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0),
+	{ /* Terminator */ },
+};
+
+static struct twl4030_power_data omap3_idle = {
+	.scripts		= omap3_idle_scripts,
+	.num			= ARRAY_SIZE(omap3_idle_scripts),
+	.resource_config	= omap3_idle_rconfig,
+};
+
+/* Disable 32 KiHz oscillator during idle */
+static struct twl4030_resconfig osc_off_rconfig[] = {
+	TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2),
+	{ /* Terminator */ },
+};
+
+static struct twl4030_power_data osc_off_idle = {
+	.scripts		= omap3_idle_scripts,
+	.num			= ARRAY_SIZE(omap3_idle_scripts),
+	.resource_config	= omap3_idle_rconfig,
+	.board_config		= osc_off_rconfig,
+};
+
+static struct of_device_id twl4030_power_of_match[] = {
+	{
+		.compatible = "ti,twl4030-power-reset",
+		.data = &omap3_reset,
+	},
+	{
+		.compatible = "ti,twl4030-power-idle",
+		.data = &omap3_idle,
+	},
+	{
+		.compatible = "ti,twl4030-power-idle-osc-off",
+		.data = &osc_off_idle,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
+#endif	/* CONFIG_OF */
+
 static int twl4030_power_probe(struct platform_device *pdev)
 {
-	struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
 	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *match;
 	int err = 0;
 	int err2 = 0;
 	u8 val;
@@ -577,8 +817,12 @@ static int twl4030_power_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	match = of_match_device(of_match_ptr(twl4030_power_of_match),
+				&pdev->dev);
+	if (match && match->data)
+		pdata = match->data;
+
 	if (pdata) {
-		/* TODO: convert to device tree */
 		err = twl4030_power_configure_scripts(pdata);
 		if (err) {
 			pr_err("TWL4030 failed to load scripts\n");
@@ -628,14 +872,6 @@ static int twl4030_power_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_power_of_match[] = {
-	{.compatible = "ti,twl4030-power", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
-#endif
-
 static struct platform_driver twl4030_power_driver = {
 	.driver = {
 		.name	= "twl4030_power",
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index d2b1670..8cfb50f3 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -498,7 +498,10 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
 #define RES_GRP_ALL		0x7	/* All resource groups */
 
 #define RES_TYPE2_R0		0x0
+#define RES_TYPE2_R1		0x1
+#define RES_TYPE2_R2		0x2
 
+#define RES_TYPE_R0		0x0
 #define RES_TYPE_ALL		0x7
 
 /* Resource states */
@@ -671,6 +674,7 @@ struct twl4030_power_data {
 	struct twl4030_script **scripts;
 	unsigned num;
 	struct twl4030_resconfig *resource_config;
+	struct twl4030_resconfig *board_config;
 #define TWL4030_RESCONFIG_UNDEF	((u8)-1)
 	bool use_poweroff;	/* Board is wired for TWL poweroff */
 };