[SCSI] BusLogic: make FlashPoint support x86-32 only

We've verified that there are 64 bit and endianness problems in the
flashpoint driver.  Reverse the logic of CONFIG_OMIT_FLASHPOINT (make
it CONFIG_SCSI_FLASHPOINT) and make it depend on X86_32 so it can't
appear for any other architectures.  Long term, if someone chooses,
they could make FlashPoint 64 bit compliant (it looks like its a
question of fixing up the sizes in some of the packed descriptors)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

4 files changed, 17 insertions, 29 deletions

diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 4d3ebb1..2d689af 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -896,7 +896,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda
 		IRQ_Channel = PCI_Device->irq;
 		IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
 		PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
-#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+#ifdef CONFIG_SCSI_FLASHPOINT
 		if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
 			BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0);
 			BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
@@ -1006,6 +1006,9 @@ static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter
 }
 
 
+#else
+#define BusLogic_InitializeProbeInfoList(adapter) \
+		BusLogic_InitializeProbeInfoListISA(adapter)
 #endif				/* CONFIG_PCI */
 
 
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index bfbfb5c..73f237a 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -34,23 +34,6 @@
 #endif
 
 /*
-  FlashPoint support is only available for the Intel x86 Architecture with
-  CONFIG_PCI set.
-*/
-
-#ifndef __i386__
-#undef CONFIG_SCSI_OMIT_FLASHPOINT
-#define CONFIG_SCSI_OMIT_FLASHPOINT
-#endif
-
-#ifndef CONFIG_PCI
-#undef CONFIG_SCSI_OMIT_FLASHPOINT
-#define CONFIG_SCSI_OMIT_FLASHPOINT
-#define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList
-#endif
-
-
-/*
   Define the maximum number of BusLogic Host Adapters supported by this driver.
 */
 
@@ -178,7 +161,7 @@ static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddres
   Define macros for testing the Host Adapter Type.
 */
 
-#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+#ifdef CONFIG_SCSI_FLASHPOINT
 
 #define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
   (HostAdapter->HostAdapterType == BusLogic_MultiMaster)
@@ -871,7 +854,7 @@ struct BusLogic_CCB {
 	void (*CallbackFunction) (struct BusLogic_CCB *);	/* Bytes 40-43 */
 	u32 BaseAddress;	/* Bytes 44-47 */
 	enum BusLogic_CompletionCode CompletionCode;	/* Byte 48 */
-#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+#ifdef CONFIG_SCSI_FLASHPOINT
 	unsigned char:8;	/* Byte 49 */
 	unsigned short OS_Flags;	/* Bytes 50-51 */
 	unsigned char Private[48];	/* Bytes 52-99 */
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 1c90781..b374e45 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -16,7 +16,7 @@
 */
 
 
-#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+#ifdef CONFIG_SCSI_FLASHPOINT
 
 #define MAX_CARDS	8
 #undef BUSTYPE_PCI
@@ -7626,7 +7626,7 @@ FlashPoint__HandleInterrupt(FlashPoint_CardHandle_T CardHandle)
 #define FlashPoint_InterruptPending	    FlashPoint__InterruptPending
 #define FlashPoint_HandleInterrupt	    FlashPoint__HandleInterrupt
 
-#else				/* CONFIG_SCSI_OMIT_FLASHPOINT */
+#else				/* !CONFIG_SCSI_FLASHPOINT */
 
 /*
   Define prototypes for the FlashPoint SCCB Manager Functions.
@@ -7641,4 +7641,4 @@ extern bool FlashPoint_InterruptPending(FlashPoint_CardHandle_T);
 extern int FlashPoint_HandleInterrupt(FlashPoint_CardHandle_T);
 extern void FlashPoint_ReleaseHostAdapter(FlashPoint_CardHandle_T);
 
-#endif				/* CONFIG_SCSI_OMIT_FLASHPOINT */
+#endif				/* CONFIG_SCSI_FLASHPOINT */
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b9d3740..7f78e3e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -588,18 +588,20 @@ config SCSI_BUSLOGIC
 	  <http://www.tldp.org/docs.html#howto>, and the files
 	  <file:Documentation/scsi/BusLogic.txt> and
 	  <file:Documentation/scsi/FlashPoint.txt> for more information.
+	  Note that support for FlashPoint is only available for 32-bit
+	  x86 configurations.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called BusLogic.
 
-config SCSI_OMIT_FLASHPOINT
-	bool "Omit FlashPoint support"
-	depends on SCSI_BUSLOGIC
+config SCSI_FLASHPOINT
+	bool "FlashPoint support"
+	depends on SCSI_BUSLOGIC && PCI && X86_32
 	help
-	  This option allows you to omit the FlashPoint support from the
+	  This option allows you to add FlashPoint support to the
 	  BusLogic SCSI driver. The FlashPoint SCCB Manager code is
-	  substantial, so users of MultiMaster Host Adapters may wish to omit
-	  it.
+	  substantial, so users of MultiMaster Host Adapters may not
+	  wish to include it.
 
 config SCSI_DMX3191D
 	tristate "DMX3191D SCSI support"