ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ

This adds Device Tree probing support to the Versatile FPGA
IRQ controller.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 95 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt
new file mode 100644
index 0000000..9989eda
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt
@@ -0,0 +1,31 @@
+* ARM Versatile FPGA interrupt controller
+
+One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+such as the Integrator or Versatile family. The output of these different
+controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+instance can handle up to 32 interrupts.
+
+Required properties:
+- compatible: "arm,versatile-fpga-irq"
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts.  Must be 1
+  as the FPGA IRQ controller has no configuration options for interrupt
+  sources.  The cell is a u32 and defines the interrupt number.
+- reg: The register bank for the FPGA interrupt controller.
+- clear-mask: a u32 number representing the mask written to clear all IRQs
+  on the controller at boot for example.
+- valid-mask: a u32 number representing a bit mask determining which of
+  the interrupts are valid. Unconnected/unused lines are set to 0, and
+  the system till not make it possible for devices to request these
+  interrupts.
+
+Example:
+
+pic: pic@14000000 {
+        compatible = "arm,versatile-fpga-irq";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0x14000000 0x100>;
+        clear-mask = <0xffffffff>;
+        valid-mask = <0x003fffff>;
+};
diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c
index 6e70d03..091ae10 100644
--- a/arch/arm/plat-versatile/fpga-irq.c
+++ b/arch/arm/plat-versatile/fpga-irq.c
@@ -5,6 +5,8 @@
 #include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
@@ -14,11 +16,17 @@
 #define IRQ_RAW_STATUS		0x04
 #define IRQ_ENABLE_SET		0x08
 #define IRQ_ENABLE_CLEAR	0x0c
+#define INT_SOFT_SET		0x10
+#define INT_SOFT_CLEAR		0x14
+#define FIQ_STATUS		0x20
+#define FIQ_RAW_STATUS		0x24
+#define FIQ_ENABLE		0x28
+#define FIQ_ENABLE_SET		0x28
+#define FIQ_ENABLE_CLEAR	0x2C
 
 /**
  * struct fpga_irq_data - irq data container for the FPGA IRQ controller
  * @base: memory offset in virtual memory
- * @irq_start: first IRQ number handled by this instance
  * @chip: chip container for this instance
  * @domain: IRQ domain for this instance
  * @valid: mask for valid IRQs on this controller
@@ -26,7 +34,6 @@
  */
 struct fpga_irq_data {
 	void __iomem *base;
-	unsigned int irq_start;
 	struct irq_chip chip;
 	u32 valid;
 	struct irq_domain *domain;
@@ -125,34 +132,79 @@ static struct irq_domain_ops fpga_irqdomain_ops = {
 	.xlate = irq_domain_xlate_onetwocell,
 };
 
-void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
-			  int parent_irq, u32 valid, struct device_node *node)
-{
+static __init struct fpga_irq_data *
+fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) {
 	struct fpga_irq_data *f;
 
 	if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
 		printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__);
-		return;
+		return NULL;
 	}
-
 	f = &fpga_irq_devices[fpga_irq_id];
 	f->base = base;
-	f->irq_start = irq_start;
 	f->chip.name = name;
 	f->chip.irq_ack = fpga_irq_mask;
 	f->chip.irq_mask = fpga_irq_mask;
 	f->chip.irq_unmask = fpga_irq_unmask;
 	f->valid = valid;
+	fpga_irq_id++;
+
+	return f;
+}
+
+void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
+			  int parent_irq, u32 valid, struct device_node *node)
+{
+	struct fpga_irq_data *f;
+
+	f = fpga_irq_prep_struct(base, name, valid);
+	if (!f)
+		return;
 
 	if (parent_irq != -1) {
 		irq_set_handler_data(parent_irq, f);
 		irq_set_chained_handler(parent_irq, fpga_irq_handle);
 	}
 
-	f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0,
+	f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0,
 					  &fpga_irqdomain_ops, f);
 	pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
 		fpga_irq_id, name, base, f->used_irqs);
+}
 
-	fpga_irq_id++;
+#ifdef CONFIG_OF
+int __init fpga_irq_of_init(struct device_node *node,
+			    struct device_node *parent)
+{
+	struct fpga_irq_data *f;
+	void __iomem *base;
+	u32 clear_mask;
+	u32 valid_mask;
+
+	if (WARN_ON(!node))
+		return -ENODEV;
+
+	base = of_iomap(node, 0);
+	WARN(!base, "unable to map fpga irq registers\n");
+
+	if (of_property_read_u32(node, "clear-mask", &clear_mask))
+		clear_mask = 0;
+
+	if (of_property_read_u32(node, "valid-mask", &valid_mask))
+		valid_mask = 0;
+
+	f = fpga_irq_prep_struct(base, node->name, valid_mask);
+	if (!f)
+		return -ENOMEM;
+
+	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
+	writel(clear_mask, base + FIQ_ENABLE_CLEAR);
+
+	f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f);
+	f->used_irqs = hweight32(valid_mask);
+
+	pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
+		fpga_irq_id, node->name, base, f->used_irqs);
+	return 0;
 }
+#endif
diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h
index 91bcfb6..1fac965 100644
--- a/arch/arm/plat-versatile/include/plat/fpga-irq.h
+++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h
@@ -7,5 +7,7 @@ struct pt_regs;
 void fpga_handle_irq(struct pt_regs *regs);
 void fpga_irq_init(void __iomem *, const char *, int, int, u32,
 		struct device_node *node);
+int fpga_irq_of_init(struct device_node *node,
+		     struct device_node *parent);
 
 #endif