cfg80211: reg: remove support for built-in regdb

Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

8 files changed, 3 insertions, 287 deletions

diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index 46c8d8b..381e5b2 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -200,23 +200,5 @@ Then in some part of your code after your wiphy has been registered:
 Statically compiled regulatory database
 ---------------------------------------
 
-In most situations the userland solution using CRDA as described
-above is the preferred solution.  However in some cases a set of
-rules built into the kernel itself may be desirable.  To account
-for this situation, a configuration option has been provided
-(i.e. CONFIG_CFG80211_INTERNAL_REGDB).  With this option enabled,
-the wireless database information contained in net/wireless/db.txt is
-used to generate a data structure encoded in net/wireless/regdb.c.
-That option also enables code in net/wireless/reg.c which queries
-the data in regdb.c as an alternative to using CRDA.
-
-The file net/wireless/db.txt should be kept up-to-date with the db.txt
-file available in the git repository here:
-
-    git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git
-
-Again, most users in most situations should be using the CRDA package
-provided with their distribution, and in most other situations users
-should be building and using CRDA on their own rather than using
-this option.  If you are not absolutely sure that you should be using
-CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_.
+When a database should be fixed into the kernel, it can be provided as a
+firmware file at build time that is then linked into the kernel.
diff --git a/net/wireless/.gitignore b/net/wireless/.gitignore
deleted file mode 100644
index c33451b..0000000
--- a/net/wireless/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-regdb.c
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 24eec55..f050030 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -140,30 +140,8 @@ config CFG80211_DEBUGFS
 
 	  If unsure, say N.
 
-config CFG80211_INTERNAL_REGDB
-	bool "use statically compiled regulatory rules database" if EXPERT
-	default n
-	depends on CFG80211
-	---help---
-	  This option generates an internal data structure representing
-	  the wireless regulatory rules described in net/wireless/db.txt
-	  and includes code to query that database. This is an alternative
-	  to using CRDA for defining regulatory rules for the kernel.
-
-	  Using this option requires some parsing of the db.txt at build time,
-	  the parser will be upkept with the latest wireless-regdb updates but
-	  older wireless-regdb formats will be ignored. The parser may later
-	  be replaced to avoid issues with conflicts on versions of
-	  wireless-regdb.
-
-	  For details see:
-
-	  http://wireless.kernel.org/en/developers/Regulatory
-
-	  Most distributions have a CRDA package. So if unsure, say N.
-
 config CFG80211_CRDA_SUPPORT
-	bool "support CRDA" if CFG80211_INTERNAL_REGDB
+	bool "support CRDA" if EXPERT
 	default y
 	depends on CFG80211
 	help
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index d06e501..5f20dac 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -14,11 +14,5 @@ cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o ocb.o
 cfg80211-$(CONFIG_OF) += of.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
-cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
 
 CFLAGS_trace.o := -I$(src)
-
-$(obj)/regdb.c: $(src)/db.txt $(src)/genregdb.awk
-	@$(AWK) -f $(srctree)/$(src)/genregdb.awk < $< > $@
-
-clean-files := regdb.c
diff --git a/net/wireless/db.txt b/net/wireless/db.txt
deleted file mode 100644
index a2fc3a0..0000000
--- a/net/wireless/db.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# This file is a placeholder to prevent accidental build breakage if someone
-# enables CONFIG_CFG80211_INTERNAL_REGDB.  Almost no one actually needs to
-# enable that build option.
-#
-# You should be using CRDA instead.  It is even better if you use the CRDA
-# package provided by your distribution, since they will probably keep it
-# up-to-date on your behalf.
-#
-# If you _really_ intend to use CONFIG_CFG80211_INTERNAL_REGDB then you will
-# need to replace this file with one containing appropriately formatted
-# regulatory rules that cover the regulatory domains you will be using.  Your
-# best option is to extract the db.txt file from the wireless-regdb git
-# repository:
-#
-#   git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git
-#
diff --git a/net/wireless/genregdb.awk b/net/wireless/genregdb.awk
deleted file mode 100644
index baf2426..0000000
--- a/net/wireless/genregdb.awk
+++ /dev/null
@@ -1,158 +0,0 @@
-#!/usr/bin/awk -f
-#
-# genregdb.awk -- generate regdb.c from db.txt
-#
-# Actually, it reads from stdin (presumed to be db.txt) and writes
-# to stdout (presumed to be regdb.c), but close enough...
-#
-# Copyright 2009 John W. Linville <linville@tuxdriver.com>
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-BEGIN {
-	active = 0
-	rules = 0;
-	print "/*"
-	print " * DO NOT EDIT -- file generated from data in db.txt"
-	print " */"
-	print ""
-	print "#include <linux/nl80211.h>"
-	print "#include <net/cfg80211.h>"
-	print "#include \"regdb.h\""
-	print ""
-	regdb = "const struct ieee80211_regdomain *reg_regdb[] = {\n"
-}
-
-function parse_country_head() {
-	country=$2
-	sub(/:/, "", country)
-	printf "static const struct ieee80211_regdomain regdom_%s = {\n", country
-	printf "\t.alpha2 = \"%s\",\n", country
-	if ($NF ~ /DFS-ETSI/)
-		printf "\t.dfs_region = NL80211_DFS_ETSI,\n"
-	else if ($NF ~ /DFS-FCC/)
-		printf "\t.dfs_region = NL80211_DFS_FCC,\n"
-	else if ($NF ~ /DFS-JP/)
-		printf "\t.dfs_region = NL80211_DFS_JP,\n"
-	printf "\t.reg_rules = {\n"
-	active = 1
-	regdb = regdb "\t&regdom_" country ",\n"
-}
-
-function parse_reg_rule()
-{
-	flag_starts_at = 7
-
-	start = $1
-	sub(/\(/, "", start)
-	end = $3
-	bw = $5
-	sub(/\),/, "", bw)
-	gain = 0
-	power = $6
-	# power might be in mW...
-	units = $7
-	dfs_cac = 0
-
-	sub(/\(/, "", power)
-	sub(/\),/, "", power)
-	sub(/\),/, "", units)
-	sub(/\)/, "", units)
-
-	if (units == "mW") {
-		flag_starts_at = 8
-		power = 10 * log(power)/log(10)
-		if ($8 ~ /[[:digit:]]/) {
-			flag_starts_at = 9
-			dfs_cac = $8
-		}
-	} else {
-		if ($7 ~ /[[:digit:]]/) {
-			flag_starts_at = 8
-			dfs_cac = $7
-		}
-	}
-	sub(/\(/, "", dfs_cac)
-	sub(/\),/, "", dfs_cac)
-	flagstr = ""
-	for (i=flag_starts_at; i<=NF; i++)
-		flagstr = flagstr $i
-	split(flagstr, flagarray, ",")
-	flags = ""
-	for (arg in flagarray) {
-		if (flagarray[arg] == "NO-OFDM") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_OFDM | "
-		} else if (flagarray[arg] == "NO-CCK") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_CCK | "
-		} else if (flagarray[arg] == "NO-INDOOR") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_INDOOR | "
-		} else if (flagarray[arg] == "NO-OUTDOOR") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_OUTDOOR | "
-		} else if (flagarray[arg] == "DFS") {
-			flags = flags "\n\t\t\tNL80211_RRF_DFS | "
-		} else if (flagarray[arg] == "PTP-ONLY") {
-			flags = flags "\n\t\t\tNL80211_RRF_PTP_ONLY | "
-		} else if (flagarray[arg] == "PTMP-ONLY") {
-			flags = flags "\n\t\t\tNL80211_RRF_PTMP_ONLY | "
-		} else if (flagarray[arg] == "PASSIVE-SCAN") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
-		} else if (flagarray[arg] == "NO-IBSS") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
-		} else if (flagarray[arg] == "NO-IR") {
-			flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
-		} else if (flagarray[arg] == "AUTO-BW") {
-			flags = flags "\n\t\t\tNL80211_RRF_AUTO_BW | "
-		}
-
-	}
-	flags = flags "0"
-	printf "\t\tREG_RULE_EXT(%d, %d, %d, %d, %.0f, %d, %s),\n", start, end, bw, gain, power, dfs_cac, flags
-	rules++
-}
-
-function print_tail_country()
-{
-	active = 0
-	printf "\t},\n"
-	printf "\t.n_reg_rules = %d\n", rules
-	printf "};\n\n"
-	rules = 0;
-}
-
-/^[ \t]*#/ {
-	# Ignore
-}
-
-!active && /^[ \t]*$/ {
-	# Ignore
-}
-
-!active && /country/ {
-	parse_country_head()
-}
-
-active && /^[ \t]*\(/ {
-	parse_reg_rule()
-}
-
-active && /^[ \t]*$/ {
-	print_tail_country()
-}
-
-END {
-	if (active)
-		print_tail_country()
-	print regdb "};"
-	print ""
-	print "int reg_regdb_size = ARRAY_SIZE(reg_regdb);"
-}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 180addd..ebf8267 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -59,7 +59,6 @@
 #include "core.h"
 #include "reg.h"
 #include "rdev-ops.h"
-#include "regdb.h"
 #include "nl80211.h"
 
 /*
@@ -495,38 +494,6 @@ static int reg_schedule_apply(const struct ieee80211_regdomain *regdom)
 	return 0;
 }
 
-#ifdef CONFIG_CFG80211_INTERNAL_REGDB
-static int reg_query_builtin(const char *alpha2)
-{
-	const struct ieee80211_regdomain *regdom = NULL;
-	unsigned int i;
-
-	for (i = 0; i < reg_regdb_size; i++) {
-		if (alpha2_equal(alpha2, reg_regdb[i]->alpha2)) {
-			regdom = reg_copy_regd(reg_regdb[i]);
-			break;
-		}
-	}
-	if (!regdom)
-		return -ENODATA;
-
-	return reg_schedule_apply(regdom);
-}
-
-/* Feel free to add any other sanity checks here */
-static void reg_regdb_size_check(void)
-{
-	/* We should ideally BUILD_BUG_ON() but then random builds would fail */
-	WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it...");
-}
-#else
-static inline void reg_regdb_size_check(void) {}
-static inline int reg_query_builtin(const char *alpha2)
-{
-	return -ENODATA;
-}
-#endif /* CONFIG_CFG80211_INTERNAL_REGDB */
-
 #ifdef CONFIG_CFG80211_CRDA_SUPPORT
 /* Max number of consecutive attempts to communicate with CRDA  */
 #define REG_MAX_CRDA_TIMEOUTS 10
@@ -885,10 +852,6 @@ int reg_reload_regdb(void)
 
 static bool reg_query_database(struct regulatory_request *request)
 {
-	/* query internal regulatory database (if it exists) */
-	if (reg_query_builtin(request->alpha2) == 0)
-		return true;
-
 	if (query_regdb_file(request->alpha2) == 0)
 		return true;
 
@@ -3580,8 +3543,6 @@ int __init regulatory_init(void)
 	spin_lock_init(&reg_pending_beacons_lock);
 	spin_lock_init(&reg_indoor_lock);
 
-	reg_regdb_size_check();
-
 	rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom);
 
 	user_alpha2[0] = '9';
diff --git a/net/wireless/regdb.h b/net/wireless/regdb.h
deleted file mode 100644
index 3279cfc..0000000
--- a/net/wireless/regdb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __REGDB_H__
-#define __REGDB_H__
-
-/*
- * Copyright 2009 John W. Linville <linville@tuxdriver.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-extern const struct ieee80211_regdomain *reg_regdb[];
-extern int reg_regdb_size;
-
-#endif /* __REGDB_H__ */