diff options
author | Mark Brown <broonie@linaro.org> | 2013-06-17 17:20:32 +0100 |
---|---|---|
committer | Mark Brown <broonie@linaro.org> | 2013-06-17 17:20:32 +0100 |
commit | f57019aa0a796251e671882004dd58d2cc55f8f1 (patch) | |
tree | 02d4b5e40dbcbf0554e9abed508b958c32ecb864 | |
parent | 7daf390b8bff7a96ae40c1f9d7356c7c5c9ac384 (diff) | |
parent | 384b8345589cbbb18a99ce1b112da90c58c802e8 (diff) | |
download | op-kernel-dev-f57019aa0a796251e671882004dd58d2cc55f8f1.zip op-kernel-dev-f57019aa0a796251e671882004dd58d2cc55f8f1.tar.gz |
Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next
-rw-r--r-- | Documentation/devicetree/bindings/sound/wm8962.txt | 23 | ||||
-rw-r--r-- | sound/soc/codecs/wm8962.c | 112 |
2 files changed, 105 insertions, 30 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt index dceb3b1..7f82b59 100644 --- a/Documentation/devicetree/bindings/sound/wm8962.txt +++ b/Documentation/devicetree/bindings/sound/wm8962.txt @@ -8,9 +8,32 @@ Required properties: - reg : the I2C address of the device. +Optional properties: + - spk-mono: This is a boolean property. If present, the SPK_MONO bit + of R51 (Class D Control 2) gets set, indicating that the speaker is + in mono mode. + + - mic-cfg : Default register value for R48 (Additional Control 4). + If absent, the default should be the register default. + + - gpio-cfg : A list of GPIO configuration register values. The list must + be 6 entries long. If absent, no configuration of these registers is + performed. And note that only the value within [0x0, 0xffff] is valid. + Any other value is regarded as setting the GPIO register by its reset + value 0x0. + Example: codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; + + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; }; diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 4b7915b..b1dc7d4 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -51,6 +51,7 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = { /* codec private data */ struct wm8962_priv { + struct wm8962_pdata pdata; struct regmap *regmap; struct snd_soc_codec *codec; @@ -2347,12 +2348,13 @@ static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = { static int wm8962_add_widgets(struct snd_soc_codec *codec) { - struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_pdata *pdata = &wm8962->pdata; struct snd_soc_dapm_context *dapm = &codec->dapm; snd_soc_add_codec_controls(codec, wm8962_snd_controls, ARRAY_SIZE(wm8962_snd_controls)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls, ARRAY_SIZE(wm8962_spk_mono_controls)); else @@ -2362,7 +2364,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec) snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets, ARRAY_SIZE(wm8962_dapm_widgets)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets, ARRAY_SIZE(wm8962_dapm_spk_mono_widgets)); else @@ -2371,7 +2373,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec) snd_soc_dapm_add_routes(dapm, wm8962_intercon, ARRAY_SIZE(wm8962_intercon)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon, ARRAY_SIZE(wm8962_spk_mono_intercon)); else @@ -3335,14 +3337,14 @@ static struct gpio_chip wm8962_template_chip = { static void wm8962_init_gpio(struct snd_soc_codec *codec) { struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8962_pdata *pdata = &wm8962->pdata; int ret; wm8962->gpio_chip = wm8962_template_chip; wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO; wm8962->gpio_chip.dev = codec->dev; - if (pdata && pdata->gpio_base) + if (pdata->gpio_base) wm8962->gpio_chip.base = pdata->gpio_base; else wm8962->gpio_chip.base = -1; @@ -3422,31 +3424,29 @@ static int wm8962_probe(struct snd_soc_codec *codec) WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA, 0); - if (pdata) { - /* Apply static configuration for GPIOs */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) - if (pdata->gpio_init[i]) { - wm8962_set_gpio_mode(codec, i + 1); - snd_soc_write(codec, 0x200 + i, - pdata->gpio_init[i] & 0xffff); - } + /* Apply static configuration for GPIOs */ + for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) + if (pdata->gpio_init[i]) { + wm8962_set_gpio_mode(codec, i + 1); + snd_soc_write(codec, 0x200 + i, + pdata->gpio_init[i] & 0xffff); + } - /* Put the speakers into mono mode? */ - if (pdata->spk_mono) - snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2, + + /* Put the speakers into mono mode? */ + if (pdata->spk_mono) + snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2, WM8962_SPK_MONO_MASK, WM8962_SPK_MONO); - - /* Micbias setup, detection enable and detection - * threasholds. */ - if (pdata->mic_cfg) - snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, - WM8962_MICDET_ENA | - WM8962_MICDET_THR_MASK | - WM8962_MICSHORT_THR_MASK | - WM8962_MICBIAS_LVL, - pdata->mic_cfg); - } + /* Micbias setup, detection enable and detection + * threasholds. */ + if (pdata->mic_cfg) + snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, + WM8962_MICDET_ENA | + WM8962_MICDET_THR_MASK | + WM8962_MICSHORT_THR_MASK | + WM8962_MICBIAS_LVL, + pdata->mic_cfg); /* Latch volume update bits */ snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME, @@ -3508,7 +3508,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) wm8962_init_gpio(codec); if (wm8962->irq) { - if (pdata && pdata->irq_active_low) { + if (pdata->irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8962_IRQ_POL; } else { @@ -3586,6 +3586,34 @@ static const struct regmap_config wm8962_regmap = { .cache_type = REGCACHE_RBTREE, }; +static int wm8962_set_pdata_from_of(struct i2c_client *i2c, + struct wm8962_pdata *pdata) +{ + const struct device_node *np = i2c->dev.of_node; + u32 val32; + int i; + + if (of_property_read_bool(np, "spk-mono")) + pdata->spk_mono = true; + + if (of_property_read_u32(np, "mic-cfg", &val32) >= 0) + pdata->mic_cfg = val32; + + if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_init, + ARRAY_SIZE(pdata->gpio_init)) >= 0) + for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) { + /* + * The range of GPIO register value is [0x0, 0xffff] + * While the default value of each register is 0x0 + * Any other value will be regarded as default value + */ + if (pdata->gpio_init[i] > 0xffff) + pdata->gpio_init[i] = 0x0; + } + + return 0; +} + static int wm8962_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -3605,6 +3633,15 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, init_completion(&wm8962->fll_lock); wm8962->irq = i2c->irq; + /* If platform data was supplied, update the default data in priv */ + if (pdata) { + memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata)); + } else if (i2c->dev.of_node) { + ret = wm8962_set_pdata_from_of(i2c, &wm8962->pdata); + if (ret != 0) + return ret; + } + for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) wm8962->supplies[i].supply = wm8962_supply_names[i]; @@ -3668,7 +3705,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, goto err_enable; } - if (pdata && pdata->in4_dc_measure) { + if (wm8962->pdata.in4_dc_measure) { ret = regmap_register_patch(wm8962->regmap, wm8962_dc_measure, ARRAY_SIZE(wm8962_dc_measure)); @@ -3721,6 +3758,21 @@ static int wm8962_runtime_resume(struct device *dev) wm8962_reset(wm8962); + /* SYSCLK defaults to on; make sure it is off so we can safely + * write to registers if the device is declocked. + */ + regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, + WM8962_SYSCLK_ENA, 0); + + /* Ensure we have soft control over all registers */ + regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, + WM8962_CLKREG_OVD, WM8962_CLKREG_OVD); + + /* Ensure that the oscillator and PLLs are disabled */ + regmap_update_bits(wm8962->regmap, WM8962_PLL2, + WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA, + 0); + regcache_sync(wm8962->regmap); regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP, |