net: smc91x: use run-time configuration on all ARM machines

The smc91x driver traditionally gets configured at compile-time
for whichever hardware it runs on. This no longer works on
ARM as we continue to move to building all-in-one kernels.

Most ARM configurations with this driver already use run-time
configuration through DT or through platform_data, but a
few have not been converted yet.

I've checked all ARM boards that use this driver in their
legacy board files, and converted the ones that were using
compile-time configuration in smc91x.h to behave like the
other ones and provide the interrupt polarity along with
the MMIO configuration (width, stride) at platform device
creation time.

In particular, these combinations were previously selectable
in Kconfig but in fact broken:

- sa1100 assabet plus pleb
- msm combined with any other armv6/v7 platform
- pxa-idp combined with any non-DMA pxa variant
- LogicPD PXA270 combined with any other pxa
- nomadik combined with any other armv4/v5 platform,
  e.g. versatile.

None of these seem critical enough to warrant a backport
to stable, but it would be nice to clean this up for good.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
I would like the patch to get merged through netdev, after
Robert and/or Linus have verified it on at least some hardware.

There are a few other non-ARM platforms using this driver,
I could do the same patch for those if we want to take
it further.

 arch/arm/mach-msm/board-halibut.c    |   8 ++++-
 arch/arm/mach-msm/board-qsd8x50.c    |   8 ++++-
 arch/arm/mach-pxa/idp.c              |   5 +++
 arch/arm/mach-pxa/lpd270.c           |   8 ++++-
 arch/arm/mach-realview/core.c        |   7 ++++
 arch/arm/mach-realview/realview_eb.c |   2 +-
 arch/arm/mach-sa1100/neponset.c      |   6 ++++
 arch/arm/mach-sa1100/pleb.c          |   7 ++++
 drivers/net/ethernet/smsc/smc91x.c   |   9 +++--
 drivers/net/ethernet/smsc/smc91x.h   | 114 ++----------------------------------------------------------
 10 files changed, 57 insertions(+), 117 deletions(-)
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 files changed, 57 insertions, 117 deletions

diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 61bfe58..fc83204 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= MSM_GPIO_TO_INT(49),
 		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 4c74861..10016a3 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -22,6 +22,7 @@
 #include <linux/usb/msm_hsusb.h>
 #include <linux/err.h>
 #include <linux/clkdev.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.flags = IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name           = "smc91x",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(smc91x_resources),
 	.resource       = smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static int __init msm_init_smc91x(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 343c4e3..7d8eab8 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -81,11 +81,16 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static void idp_backlight_power(int on)
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ad777b3..28da319 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= LPD270_ETHERNET_IRQ,
 		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT;
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct resource lpd270_flash_resources[] = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 850e506..c309593 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -28,6 +28,7 @@
 #include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/smc91x.h>
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
@@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device realview_eth_device = {
 	.name		= "smsc911x",
 	.id		= 0,
@@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res)
 	realview_eth_device.resource = res;
 	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
 		realview_eth_device.dev.platform_data = &smsc911x_config;
+	else
+		realview_eth_device.dev.platform_data = &smc91x_platdata;
 
 	return platform_device_register(&realview_eth_device);
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 64c88d6..b3869cb 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -234,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = {
 	[1] = {
 		.start		= IRQ_EB_ETH,
 		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ,
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 169262e..7b0cd31 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -12,6 +12,7 @@
 #include <linux/pm.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev)
 			0x02000000, "smc91x-attrib"),
 		{ .flags = IORESOURCE_IRQ },
 	};
+	struct smc91x_platdata smc91x_platdata = {
+		.flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
+	};
 	struct platform_device_info smc91x_devinfo = {
 		.parent = &dev->dev,
 		.name = "smc91x",
 		.id = 0,
 		.res = smc91x_resources,
 		.num_res = ARRAY_SIZE(smc91x_resources),
+		.data = &smc91c_platdata,
+		.size_data = sizeof(smc91c_platdata),
 	};
 	int ret, irq;
 
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 0912618..696fd0f 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = {
 #endif
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev = {
+		.platform_data  = &smc91c_platdata,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index fa3f193..209ee1b 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -91,6 +91,10 @@ static const char version[] =
 
 #include "smc91x.h"
 
+#if defined(CONFIG_ASSABET_NEPONSET)
+#include <mach/neponset.h>
+#endif
+
 #ifndef SMC_NOWAIT
 # define SMC_NOWAIT		0
 #endif
@@ -2355,8 +2359,9 @@ static int smc_drv_probe(struct platform_device *pdev)
 	ret = smc_request_attrib(pdev, ndev);
 	if (ret)
 		goto out_release_io;
-#if defined(CONFIG_ASSABET_NEPONSET) && !defined(CONFIG_SA1100_PLEB)
-	neponset_ncr_set(NCR_ENET_OSC_EN);
+#if defined(CONFIG_ASSABET_NEPONSET)
+	if (machine_is_assabet() && machine_has_neponset())
+		neponset_ncr_set(NCR_ENET_OSC_EN);
 #endif
 	platform_set_drvdata(pdev, ndev);
 	ret = smc_enable_device(pdev);
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index be67baf..3a18501 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -39,14 +39,7 @@
  * Define your architecture specific bus configuration parameters here.
  */
 
-#if defined(CONFIG_ARCH_LUBBOCK) ||\
-    defined(CONFIG_MACH_MAINSTONE) ||\
-    defined(CONFIG_MACH_ZYLONITE) ||\
-    defined(CONFIG_MACH_LITTLETON) ||\
-    defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER) ||\
-    defined(CONFIG_MACH_STARGATE2) ||\
-    defined(CONFIG_ARCH_VERSATILE)
+#if defined(CONFIG_ARM)
 
 #include <asm/mach-types.h>
 
@@ -74,95 +67,8 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
-		unsigned int v = val << 16;
-		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
-		writel(v, ioaddr + (reg & ~2));
-	} else {
-		writew(val, ioaddr + reg);
-	}
-}
-
-#elif defined(CONFIG_SA1100_PLEB)
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS		(-1)
-
-#elif defined(CONFIG_SA1100_ASSABET)
-
-#include <mach/neponset.h>
-
-/* We can only do 8-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	0
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-/* The first two address lines aren't connected... */
-#define SMC_IO_SHIFT		2
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
-#define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
-#elif	defined(CONFIG_MACH_LOGICPD_PXA270) ||	\
-	defined(CONFIG_MACH_NOMADIK_8815NHK)
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#elif	defined(CONFIG_ARCH_INNOKOM) || \
-	defined(CONFIG_ARCH_PXA_IDP) || \
-	defined(CONFIG_ARCH_RAMSES) || \
-	defined(CONFIG_ARCH_PCM027)
-
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	1
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-#define SMC_USE_PXA_DMA		1
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_inl(a, r)		readl((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outl(v, a, r)	writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
-/* We actually can't write halfwords properly if not word aligned */
-static inline void
-SMC_outw(u16 val, void __iomem *ioaddr, int reg)
-{
-	if (reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2() ||
+	     machine_is_pxa_idp()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
@@ -237,20 +143,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define RPC_LSA_DEFAULT         RPC_LED_100_10
 #define RPC_LSB_DEFAULT         RPC_LED_TX_RX
 
-#elif defined(CONFIG_ARCH_MSM)
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
-
 #elif defined(CONFIG_COLDFIRE)
 
 #define SMC_CAN_USE_8BIT	0