Merge branch 'davem-next.mii' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6

4 files changed, 69 insertions, 194 deletions

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 3fa9140..b2dc2c8 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -1428,7 +1428,7 @@ mii_wait_link (struct net_device *dev, int wait)
 
 	do {
 		bmsr = mii_read (dev, phy_addr, MII_BMSR);
-		if (bmsr & MII_BMSR_LINK_STATUS)
+		if (bmsr & BMSR_LSTATUS)
 			return 0;
 		mdelay (1);
 	} while (--wait > 0);
@@ -1449,60 +1449,60 @@ mii_get_media (struct net_device *dev)
 
 	bmsr = mii_read (dev, phy_addr, MII_BMSR);
 	if (np->an_enable) {
-		if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+		if (!(bmsr & BMSR_ANEGCOMPLETE)) {
 			/* Auto-Negotiation not completed */
 			return -1;
 		}
-		negotiate = mii_read (dev, phy_addr, MII_ANAR) &
-			mii_read (dev, phy_addr, MII_ANLPAR);
-		mscr = mii_read (dev, phy_addr, MII_MSCR);
-		mssr = mii_read (dev, phy_addr, MII_MSSR);
-		if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) {
+		negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) &
+			mii_read (dev, phy_addr, MII_LPA);
+		mscr = mii_read (dev, phy_addr, MII_CTRL1000);
+		mssr = mii_read (dev, phy_addr, MII_STAT1000);
+		if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) {
 			np->speed = 1000;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
-		} else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) {
+		} else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) {
 			np->speed = 1000;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
-		} else if (negotiate & MII_ANAR_100BX_FD) {
+		} else if (negotiate & ADVERTISE_100FULL) {
 			np->speed = 100;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
-		} else if (negotiate & MII_ANAR_100BX_HD) {
+		} else if (negotiate & ADVERTISE_100HALF) {
 			np->speed = 100;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
-		} else if (negotiate & MII_ANAR_10BT_FD) {
+		} else if (negotiate & ADVERTISE_10FULL) {
 			np->speed = 10;
 			np->full_duplex = 1;
 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
-		} else if (negotiate & MII_ANAR_10BT_HD) {
+		} else if (negotiate & ADVERTISE_10HALF) {
 			np->speed = 10;
 			np->full_duplex = 0;
 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
 		}
-		if (negotiate & MII_ANAR_PAUSE) {
+		if (negotiate & ADVERTISE_PAUSE_CAP) {
 			np->tx_flow &= 1;
 			np->rx_flow &= 1;
-		} else if (negotiate & MII_ANAR_ASYMMETRIC) {
+		} else if (negotiate & ADVERTISE_PAUSE_ASYM) {
 			np->tx_flow = 0;
 			np->rx_flow &= 1;
 		}
 		/* else tx_flow, rx_flow = user select  */
 	} else {
 		__u16 bmcr = mii_read (dev, phy_addr, MII_BMCR);
-		switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) {
-		case MII_BMCR_SPEED_1000:
+		switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) {
+		case BMCR_SPEED1000:
 			printk (KERN_INFO "Operating at 1000 Mbps, ");
 			break;
-		case MII_BMCR_SPEED_100:
+		case BMCR_SPEED100:
 			printk (KERN_INFO "Operating at 100 Mbps, ");
 			break;
 		case 0:
 			printk (KERN_INFO "Operating at 10 Mbps, ");
 		}
-		if (bmcr & MII_BMCR_DUPLEX_MODE) {
+		if (bmcr & BMCR_FULLDPLX) {
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
@@ -1536,24 +1536,22 @@ mii_set_media (struct net_device *dev)
 	if (np->an_enable) {
 		/* Advertise capabilities */
 		bmsr = mii_read (dev, phy_addr, MII_BMSR);
-		anar = mii_read (dev, phy_addr, MII_ANAR) &
-			     ~MII_ANAR_100BX_FD &
-			     ~MII_ANAR_100BX_HD &
-			     ~MII_ANAR_100BT4 &
-			     ~MII_ANAR_10BT_FD &
-			     ~MII_ANAR_10BT_HD;
-		if (bmsr & MII_BMSR_100BX_FD)
-			anar |= MII_ANAR_100BX_FD;
-		if (bmsr & MII_BMSR_100BX_HD)
-			anar |= MII_ANAR_100BX_HD;
-		if (bmsr & MII_BMSR_100BT4)
-			anar |= MII_ANAR_100BT4;
-		if (bmsr & MII_BMSR_10BT_FD)
-			anar |= MII_ANAR_10BT_FD;
-		if (bmsr & MII_BMSR_10BT_HD)
-			anar |= MII_ANAR_10BT_HD;
-		anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC;
-		mii_write (dev, phy_addr, MII_ANAR, anar);
+		anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
+			~(ADVERTISE_100FULL | ADVERTISE_10FULL |
+			  ADVERTISE_100HALF | ADVERTISE_10HALF |
+			  ADVERTISE_100BASE4);
+		if (bmsr & BMSR_100FULL)
+			anar |= ADVERTISE_100FULL;
+		if (bmsr & BMSR_100HALF)
+			anar |= ADVERTISE_100HALF;
+		if (bmsr & BMSR_100BASE4)
+			anar |= ADVERTISE_100BASE4;
+		if (bmsr & BMSR_10FULL)
+			anar |= ADVERTISE_10FULL;
+		if (bmsr & BMSR_10HALF)
+			anar |= ADVERTISE_10HALF;
+		anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+		mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
 		/* Enable Auto crossover */
 		pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
@@ -1561,8 +1559,8 @@ mii_set_media (struct net_device *dev)
 		mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
 
 		/* Soft reset PHY */
-		mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-		bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET;
+		mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(1);
 	} else {
@@ -1574,7 +1572,7 @@ mii_set_media (struct net_device *dev)
 
 		/* 2) PHY Reset */
 		bmcr = mii_read (dev, phy_addr, MII_BMCR);
-		bmcr |= MII_BMCR_RESET;
+		bmcr |= BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 
 		/* 3) Power Down */
@@ -1583,25 +1581,25 @@ mii_set_media (struct net_device *dev)
 		mdelay (100);	/* wait a certain time */
 
 		/* 4) Advertise nothing */
-		mii_write (dev, phy_addr, MII_ANAR, 0);
+		mii_write (dev, phy_addr, MII_ADVERTISE, 0);
 
 		/* 5) Set media and Power Up */
-		bmcr = MII_BMCR_POWER_DOWN;
+		bmcr = BMCR_PDOWN;
 		if (np->speed == 100) {
-			bmcr |= MII_BMCR_SPEED_100;
+			bmcr |= BMCR_SPEED100;
 			printk (KERN_INFO "Manual 100 Mbps, ");
 		} else if (np->speed == 10) {
 			printk (KERN_INFO "Manual 10 Mbps, ");
 		}
 		if (np->full_duplex) {
-			bmcr |= MII_BMCR_DUPLEX_MODE;
+			bmcr |= BMCR_FULLDPLX;
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
 		}
 #if 0
 		/* Set 1000BaseT Master/Slave setting */
-		mscr = mii_read (dev, phy_addr, MII_MSCR);
+		mscr = mii_read (dev, phy_addr, MII_CTRL1000);
 		mscr |= MII_MSCR_CFG_ENABLE;
 		mscr &= ~MII_MSCR_CFG_VALUE = 0;
 #endif
@@ -1624,7 +1622,7 @@ mii_get_media_pcs (struct net_device *dev)
 
 	bmsr = mii_read (dev, phy_addr, PCS_BMSR);
 	if (np->an_enable) {
-		if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+		if (!(bmsr & BMSR_ANEGCOMPLETE)) {
 			/* Auto-Negotiation not completed */
 			return -1;
 		}
@@ -1649,7 +1647,7 @@ mii_get_media_pcs (struct net_device *dev)
 	} else {
 		__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
 		printk (KERN_INFO "Operating at 1000 Mbps, ");
-		if (bmcr & MII_BMCR_DUPLEX_MODE) {
+		if (bmcr & BMCR_FULLDPLX) {
 			printk (KERN_CONT "Full duplex\n");
 		} else {
 			printk (KERN_CONT "Half duplex\n");
@@ -1682,7 +1680,7 @@ mii_set_media_pcs (struct net_device *dev)
 	if (np->an_enable) {
 		/* Advertise capabilities */
 		esr = mii_read (dev, phy_addr, PCS_ESR);
-		anar = mii_read (dev, phy_addr, MII_ANAR) &
+		anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
 			~PCS_ANAR_HALF_DUPLEX &
 			~PCS_ANAR_FULL_DUPLEX;
 		if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD))
@@ -1690,22 +1688,21 @@ mii_set_media_pcs (struct net_device *dev)
 		if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD))
 			anar |= PCS_ANAR_FULL_DUPLEX;
 		anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC;
-		mii_write (dev, phy_addr, MII_ANAR, anar);
+		mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
 		/* Soft reset PHY */
-		mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-		bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN |
-		       MII_BMCR_RESET;
+		mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(1);
 	} else {
 		/* Force speed setting */
 		/* PHY Reset */
-		bmcr = MII_BMCR_RESET;
+		bmcr = BMCR_RESET;
 		mii_write (dev, phy_addr, MII_BMCR, bmcr);
 		mdelay(10);
 		if (np->full_duplex) {
-			bmcr = MII_BMCR_DUPLEX_MODE;
+			bmcr = BMCR_FULLDPLX;
 			printk (KERN_INFO "Manual full duplex\n");
 		} else {
 			bmcr = 0;
@@ -1715,7 +1712,7 @@ mii_set_media_pcs (struct net_device *dev)
 		mdelay(10);
 
 		/*  Advertise nothing */
-		mii_write (dev, phy_addr, MII_ANAR, 0);
+		mii_write (dev, phy_addr, MII_ADVERTISE, 0);
 	}
 	return 0;
 }
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 7caab3d..ba0adca 100644
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
+#include <linux/mii.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>	/* Processor type for cache alignment. */
 #include <asm/io.h>
@@ -271,20 +272,9 @@ enum RFS_bits {
 #define MII_RESET_TIME_OUT		10000
 /* MII register */
 enum _mii_reg {
-	MII_BMCR = 0,
-	MII_BMSR = 1,
-	MII_PHY_ID1 = 2,
-	MII_PHY_ID2 = 3,
-	MII_ANAR = 4,
-	MII_ANLPAR = 5,
-	MII_ANER = 6,
-	MII_ANNPT = 7,
-	MII_ANLPRNP = 8,
-	MII_MSCR = 9,
-	MII_MSSR = 10,
-	MII_ESR = 15,
 	MII_PHY_SCR = 16,
 };
+
 /* PCS register */
 enum _pcs_reg {
 	PCS_BMCR = 0,
@@ -297,102 +287,6 @@ enum _pcs_reg {
 	PCS_ESR = 15,
 };
 
-/* Basic Mode Control Register */
-enum _mii_bmcr {
-	MII_BMCR_RESET = 0x8000,
-	MII_BMCR_LOOP_BACK = 0x4000,
-	MII_BMCR_SPEED_LSB = 0x2000,
-	MII_BMCR_AN_ENABLE = 0x1000,
-	MII_BMCR_POWER_DOWN = 0x0800,
-	MII_BMCR_ISOLATE = 0x0400,
-	MII_BMCR_RESTART_AN = 0x0200,
-	MII_BMCR_DUPLEX_MODE = 0x0100,
-	MII_BMCR_COL_TEST = 0x0080,
-	MII_BMCR_SPEED_MSB = 0x0040,
-	MII_BMCR_SPEED_RESERVED = 0x003f,
-	MII_BMCR_SPEED_10 = 0,
-	MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB,
-	MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB,
-};
-
-/* Basic Mode Status Register */
-enum _mii_bmsr {
-	MII_BMSR_100BT4 = 0x8000,
-	MII_BMSR_100BX_FD = 0x4000,
-	MII_BMSR_100BX_HD = 0x2000,
-	MII_BMSR_10BT_FD = 0x1000,
-	MII_BMSR_10BT_HD = 0x0800,
-	MII_BMSR_100BT2_FD = 0x0400,
-	MII_BMSR_100BT2_HD = 0x0200,
-	MII_BMSR_EXT_STATUS = 0x0100,
-	MII_BMSR_PREAMBLE_SUPP = 0x0040,
-	MII_BMSR_AN_COMPLETE = 0x0020,
-	MII_BMSR_REMOTE_FAULT = 0x0010,
-	MII_BMSR_AN_ABILITY = 0x0008,
-	MII_BMSR_LINK_STATUS = 0x0004,
-	MII_BMSR_JABBER_DETECT = 0x0002,
-	MII_BMSR_EXT_CAP = 0x0001,
-};
-
-/* ANAR */
-enum _mii_anar {
-	MII_ANAR_NEXT_PAGE = 0x8000,
-	MII_ANAR_REMOTE_FAULT = 0x4000,
-	MII_ANAR_ASYMMETRIC = 0x0800,
-	MII_ANAR_PAUSE = 0x0400,
-	MII_ANAR_100BT4 = 0x0200,
-	MII_ANAR_100BX_FD = 0x0100,
-	MII_ANAR_100BX_HD = 0x0080,
-	MII_ANAR_10BT_FD = 0x0020,
-	MII_ANAR_10BT_HD = 0x0010,
-	MII_ANAR_SELECTOR = 0x001f,
-	MII_IEEE8023_CSMACD = 0x0001,
-};
-
-/* ANLPAR */
-enum _mii_anlpar {
-	MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE,
-	MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT,
-	MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC,
-	MII_ANLPAR_PAUSE = MII_ANAR_PAUSE,
-	MII_ANLPAR_100BT4 = MII_ANAR_100BT4,
-	MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD,
-	MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD,
-	MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD,
-	MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD,
-	MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR,
-};
-
-/* Auto-Negotiation Expansion Register */
-enum _mii_aner {
-	MII_ANER_PAR_DETECT_FAULT = 0x0010,
-	MII_ANER_LP_NEXTPAGABLE = 0x0008,
-	MII_ANER_NETXTPAGABLE = 0x0004,
-	MII_ANER_PAGE_RECEIVED = 0x0002,
-	MII_ANER_LP_NEGOTIABLE = 0x0001,
-};
-
-/* MASTER-SLAVE Control Register */
-enum _mii_mscr {
-	MII_MSCR_TEST_MODE = 0xe000,
-	MII_MSCR_CFG_ENABLE = 0x1000,
-	MII_MSCR_CFG_VALUE = 0x0800,
-	MII_MSCR_PORT_VALUE = 0x0400,
-	MII_MSCR_1000BT_FD = 0x0200,
-	MII_MSCR_1000BT_HD = 0X0100,
-};
-
-/* MASTER-SLAVE Status Register */
-enum _mii_mssr {
-	MII_MSSR_CFG_FAULT = 0x8000,
-	MII_MSSR_CFG_RES = 0x4000,
-	MII_MSSR_LOCAL_RCV_STATUS = 0x2000,
-	MII_MSSR_REMOTE_RCVR = 0x1000,
-	MII_MSSR_LP_1000BT_FD = 0x0800,
-	MII_MSSR_LP_1000BT_HD = 0x0400,
-	MII_MSSR_IDLE_ERR_COUNT = 0x00ff,
-};
-
 /* IEEE Extened Status Register */
 enum _mii_esr {
 	MII_ESR_1000BX_FD = 0x8000,
diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index c94f5ef..0d8cfd9 100644
--- a/drivers/net/ethernet/sun/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -17,6 +17,7 @@
 #include <linux/crc32.h>
 #include <linux/errno.h>
 #include <linux/ethtool.h>
+#include <linux/mii.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
@@ -500,13 +501,13 @@ static int try_next_permutation(struct bigmac *bp, void __iomem *tregs)
 
 		/* Reset the PHY. */
 		bp->sw_bmcr	= (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 		bp->sw_bmcr	= (BMCR_RESET);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 		timeout = 64;
 		while (--timeout) {
-			bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+			bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 			if ((bp->sw_bmcr & BMCR_RESET) == 0)
 				break;
 			udelay(20);
@@ -514,11 +515,11 @@ static int try_next_permutation(struct bigmac *bp, void __iomem *tregs)
 		if (timeout == 0)
 			printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
 
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 		/* Now we try 10baseT. */
 		bp->sw_bmcr &= ~(BMCR_SPEED100);
-		bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+		bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 		return 0;
 	}
 
@@ -534,8 +535,8 @@ static void bigmac_timer(unsigned long data)
 
 	bp->timer_ticks++;
 	if (bp->timer_state == ltrywait) {
-		bp->sw_bmsr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMSR);
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmsr = bigmac_tcvr_read(bp, tregs, MII_BMSR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 		if (bp->sw_bmsr & BMSR_LSTATUS) {
 			printk(KERN_INFO "%s: Link is now up at %s.\n",
 			       bp->dev->name,
@@ -588,18 +589,18 @@ static void bigmac_begin_auto_negotiation(struct bigmac *bp)
 	int timeout;
 
 	/* Grab new software copies of PHY registers. */
-	bp->sw_bmsr	= bigmac_tcvr_read(bp, tregs, BIGMAC_BMSR);
-	bp->sw_bmcr	= bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+	bp->sw_bmsr	= bigmac_tcvr_read(bp, tregs, MII_BMSR);
+	bp->sw_bmcr	= bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 	/* Reset the PHY. */
 	bp->sw_bmcr	= (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK);
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 	bp->sw_bmcr	= (BMCR_RESET);
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 	timeout = 64;
 	while (--timeout) {
-		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+		bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 		if ((bp->sw_bmcr & BMCR_RESET) == 0)
 			break;
 		udelay(20);
@@ -607,11 +608,11 @@ static void bigmac_begin_auto_negotiation(struct bigmac *bp)
 	if (timeout == 0)
 		printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
 
-	bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, BIGMAC_BMCR);
+	bp->sw_bmcr = bigmac_tcvr_read(bp, tregs, MII_BMCR);
 
 	/* First we try 100baseT. */
 	bp->sw_bmcr |= BMCR_SPEED100;
-	bigmac_tcvr_write(bp, tregs, BIGMAC_BMCR, bp->sw_bmcr);
+	bigmac_tcvr_write(bp, tregs, MII_BMCR, bp->sw_bmcr);
 
 	bp->timer_state = ltrywait;
 	bp->timer_ticks = 0;
@@ -1054,7 +1055,7 @@ static u32 bigmac_get_link(struct net_device *dev)
 	struct bigmac *bp = netdev_priv(dev);
 
 	spin_lock_irq(&bp->lock);
-	bp->sw_bmsr = bigmac_tcvr_read(bp, bp->tregs, BIGMAC_BMSR);
+	bp->sw_bmsr = bigmac_tcvr_read(bp, bp->tregs, MII_BMSR);
 	spin_unlock_irq(&bp->lock);
 
 	return (bp->sw_bmsr & BMSR_LSTATUS);
diff --git a/drivers/net/ethernet/sun/sunbmac.h b/drivers/net/ethernet/sun/sunbmac.h
index 4943e97..06dd217 100644
--- a/drivers/net/ethernet/sun/sunbmac.h
+++ b/drivers/net/ethernet/sun/sunbmac.h
@@ -223,23 +223,6 @@
 #define BIGMAC_PHY_EXTERNAL   0 /* External transceiver */
 #define BIGMAC_PHY_INTERNAL   1 /* Internal transceiver */
 
-/* PHY registers */
-#define BIGMAC_BMCR           0x00 /* Basic mode control register	*/
-#define BIGMAC_BMSR           0x01 /* Basic mode status register	*/
-
-/* BMCR bits */
-#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
-#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
-#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
-#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
-#define BMCR_RESET              0x8000  /* Reset the DP83840           */
-
-/* BMSR bits */
-#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
-#define BMSR_JCD                0x0002  /* Jabber detected             */
-#define BMSR_LSTATUS            0x0004  /* Link status                 */
-
 /* Ring descriptors and such, same as Quad Ethernet. */
 struct be_rxd {
 	u32 rx_flags;