summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorCorey Minyard <cminyard@mvista.com>2013-02-27 17:05:13 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-27 19:10:21 -0800
commitf2afae4629d74287aaac39d0532aac5819e77e70 (patch)
tree886a14267a9889b24e019d60be7b3f125204b9fd
parentd941aeae42942c2ef61ed5e05cc1ad0428085704 (diff)
downloadop-kernel-dev-f2afae4629d74287aaac39d0532aac5819e77e70.zip
op-kernel-dev-f2afae4629d74287aaac39d0532aac5819e77e70.tar.gz
ipmi: add options to disable openfirmware and PCI scanning
Add try... parameters to disable pci and platform (openfirmware) device scanning for IPMI. Also add docs for all the try... parameters. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--Documentation/IPMI.txt18
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c38
2 files changed, 40 insertions, 16 deletions
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 16eb4c9..f13c913 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -348,34 +348,40 @@ You can change this at module load time (for a module) with:
modprobe ipmi_si.o type=<type1>,<type2>....
ports=<port1>,<port2>... addrs=<addr1>,<addr2>...
- irqs=<irq1>,<irq2>... trydefaults=[0|1]
+ irqs=<irq1>,<irq2>...
regspacings=<sp1>,<sp2>,... regsizes=<size1>,<size2>,...
regshifts=<shift1>,<shift2>,...
slave_addrs=<addr1>,<addr2>,...
force_kipmid=<enable1>,<enable2>,...
kipmid_max_busy_us=<ustime1>,<ustime2>,...
unload_when_empty=[0|1]
+ trydefaults=[0|1] trydmi=[0|1] tryacpi=[0|1]
+ tryplatform=[0|1] trypci=[0|1]
-Each of these except si_trydefaults is a list, the first item for the
+Each of these except try... items is a list, the first item for the
first interface, second item for the second interface, etc.
The si_type may be either "kcs", "smic", or "bt". If you leave it blank, it
defaults to "kcs".
-If you specify si_addrs as non-zero for an interface, the driver will
+If you specify addrs as non-zero for an interface, the driver will
use the memory address given as the address of the device. This
overrides si_ports.
-If you specify si_ports as non-zero for an interface, the driver will
+If you specify ports as non-zero for an interface, the driver will
use the I/O port given as the device address.
-If you specify si_irqs as non-zero for an interface, the driver will
+If you specify irqs as non-zero for an interface, the driver will
attempt to use the given interrupt for the device.
-si_trydefaults sets whether the standard IPMI interface at 0xca2 and
+trydefaults sets whether the standard IPMI interface at 0xca2 and
any interfaces specified by ACPE are tried. By default, the driver
tries it, set this value to zero to turn this off.
+The other try... items disable discovery by their corresponding
+names. These are all enabled by default, set them to zero to disable
+them. The tryplatform disables openfirmware.
+
The next three parameters have to do with register layout. The
registers used by the interfaces may not appear at successive
locations and they may not be in 8-bit registers. These parameters
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index a58bedd..0ac9b45 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1214,6 +1214,10 @@ static bool si_tryacpi = 1;
#ifdef CONFIG_DMI
static bool si_trydmi = 1;
#endif
+static bool si_tryplatform = 1;
+#ifdef CONFIG_PCI
+static bool si_trypci = 1;
+#endif
static bool si_trydefaults = 1;
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
@@ -1254,6 +1258,15 @@ module_param_named(trydmi, si_trydmi, bool, 0);
MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the"
" default scan of the interfaces identified via DMI");
#endif
+module_param_named(tryplatform, si_tryplatform, bool, 0);
+MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the"
+ " default scan of the interfaces identified via platform"
+ " interfaces like openfirmware");
+#ifdef CONFIG_PCI
+module_param_named(trypci, si_trypci, bool, 0);
+MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the"
+ " default scan of the interfaces identified via pci");
+#endif
module_param_named(trydefaults, si_trydefaults, bool, 0);
MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
" default scan of the KCS and SMIC interface at the standard"
@@ -3387,13 +3400,15 @@ static int init_ipmi_si(void)
return 0;
initialized = 1;
- rv = platform_driver_register(&ipmi_driver);
- if (rv) {
- printk(KERN_ERR PFX "Unable to register driver: %d\n", rv);
- return rv;
+ if (si_tryplatform) {
+ rv = platform_driver_register(&ipmi_driver);
+ if (rv) {
+ printk(KERN_ERR PFX "Unable to register "
+ "driver: %d\n", rv);
+ return rv;
+ }
}
-
/* Parse out the si_type string into its components. */
str = si_type_str;
if (*str != '\0') {
@@ -3416,11 +3431,14 @@ static int init_ipmi_si(void)
return 0;
#ifdef CONFIG_PCI
- rv = pci_register_driver(&ipmi_pci_driver);
- if (rv)
- printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
- else
- pci_registered = 1;
+ if (si_trypci) {
+ rv = pci_register_driver(&ipmi_pci_driver);
+ if (rv)
+ printk(KERN_ERR PFX "Unable to register "
+ "PCI driver: %d\n", rv);
+ else
+ pci_registered = 1;
+ }
#endif
#ifdef CONFIG_ACPI
OpenPOWER on IntegriCloud