Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...

52 files changed, 92 insertions, 92 deletions

diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 1d3ace0..b7ee5c7 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -11,7 +11,7 @@ Please find an example below:
 
     Clockgen block diagram
     -------------------------------------------------------------------
-   |                     Flexgen stucture                              |
+   |                     Flexgen structure                             |
    |                  ---------------------------------------------    |
    |                 |    -------       --------       --------    |   |
 clk_sysin            |   |       |     |        |     |        |   |   |
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index a0c8511..8638f61 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -172,7 +172,7 @@ ways.
 
  - eh_strategy_handler() callback
 	This is one big callback which should perform whole error
-	handling.  As such, it should do all choirs SCSI midlayer
+	handling.  As such, it should do all chores the SCSI midlayer
 	performs during recovery.  This will be discussed in [2-2].
 
  Once recovery is complete, SCSI EH resumes normal operation by
@@ -428,7 +428,7 @@ scmd->allowed.
 scsi_unjam_host() and it is responsible for whole recovery process.
 On completion, the handler should have made lower layers forget about
 all failed scmds and either ready for new commands or offline.  Also,
-it should perform SCSI EH maintenance choirs to maintain integrity of
+it should perform SCSI EH maintenance chores to maintain integrity of
 SCSI midlayer.  IOW, of the steps described in [2-1-2], all steps
 except for #1 must be implemented by eh_strategy_handler().
 
diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt
index 4cf53e4..635e574 100644
--- a/Documentation/usb/gadget_configfs.txt
+++ b/Documentation/usb/gadget_configfs.txt
@@ -376,7 +376,7 @@ functions and binds them. This way the whole gadget is bound.
 configured, so config_groups for particular functions are defined
 in the functions implementation files drivers/usb/gadget/f_*.c.
 
-5. Funciton's code is written in such a way that it uses
+5. Function's code is written in such a way that it uses
 
 usb_get_function_instance(), which, in turn, calls request_module.
 So, provided that modprobe works, modules for particular functions
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index f3bb2dd..d2d8e94 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -102,7 +102,7 @@
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index b9e3f1c..e4a00ba 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -34,7 +34,7 @@ config ARCH_EXYNOS3
 	bool "SAMSUNG EXYNOS3"
 	select ARM_CPU_SUSPEND if PM
 	help
-	  Samsung EXYNOS3 (Crotex-A7) SoC based systems
+	  Samsung EXYNOS3 (Cortex-A7) SoC based systems
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 5ebdb32..94f888d 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -1092,7 +1092,7 @@ static int __init edac_devinit(void)
 		name = edac_device_names[i];
 		dev = platform_device_register_simple(name, -1, NULL, 0);
 		if (IS_ERR(dev)) {
-			pr_err("Registation of %s failed!\n", name);
+			pr_err("Registration of %s failed!\n", name);
 			err = PTR_ERR(dev);
 		}
 	}
@@ -1103,7 +1103,7 @@ static int __init edac_devinit(void)
 		dev = platform_device_register_simple("octeon_lmc_edac",
 						      i, NULL, 0);
 		if (IS_ERR(dev)) {
-			pr_err("Registation of octeon_lmc_edac %d failed!\n", i);
+			pr_err("Registration of octeon_lmc_edac %d failed!\n", i);
 			err = PTR_ERR(dev);
 		}
 	}
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 59cccd9..d07e041 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -708,7 +708,7 @@ static int __init octeon_pci_setup(void)
 
 	if (IS_ERR(platform_device_register_simple("octeon_pci_edac",
 						   -1, NULL, 0)))
-		pr_err("Registation of co_pci_edac failed!\n");
+		pr_err("Registration of co_pci_edac failed!\n");
 
 	octeon_pci_dma_init();
 
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 769778f8..cc536d4 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -661,7 +661,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 	if (unlikely((pr && !(mas3 & MAS3_UX)) ||
 		     (!pr && !(mas3 & MAS3_SX)))) {
 		pr_err_ratelimited(
-			"%s: Instuction emulation from guest addres %08lx without execute permission\n",
+			"%s: Instruction emulation from guest address %08lx without execute permission\n",
 			__func__, geaddr);
 		return EMULATE_AGAIN;
 	}
@@ -673,7 +673,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 	if (has_feature(vcpu, VCPU_FTR_MMU_V2) &&
 	    unlikely((mas2 & MAS2_I) || (mas2 & MAS2_W) || !(mas2 & MAS2_M))) {
 		pr_err_ratelimited(
-			"%s: Instuction emulation from guest addres %08lx mismatches storage attributes\n",
+			"%s: Instruction emulation from guest address %08lx mismatches storage attributes\n",
 			__func__, geaddr);
 		return EMULATE_AGAIN;
 	}
@@ -686,7 +686,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
 
 	/* Guard against emulation from devices area */
 	if (unlikely(!page_is_ram(pfn))) {
-		pr_err_ratelimited("%s: Instruction emulation from non-RAM host addres %08llx is not supported\n",
+		pr_err_ratelimited("%s: Instruction emulation from non-RAM host address %08llx is not supported\n",
 			 __func__, addr);
 		return EMULATE_AGAIN;
 	}
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index c46c876..92ee840 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -718,4 +718,4 @@ err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
 	b	exit_vmx_usercopy	/* tail call optimise */
-#endif /* CONFiG_ALTIVEC */
+#endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index 2ff5c14..0830587 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -653,4 +653,4 @@ _GLOBAL(memcpy_power7)
 15:	addi	r1,r1,STACKFRAMESIZE
 	ld	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 	b	exit_vmx_copy		/* tail call optimise */
-#endif /* CONFiG_ALTIVEC */
+#endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 9615d82..78c45f3 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -67,7 +67,7 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
 {
 	__tlbil_va(address, pid);
 }
-#endif /* CONIFG_8xx */
+#endif /* CONFIG_8xx */
 
 #if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
 extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 82f2da2..d2ac1c1 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -220,7 +220,6 @@ config AKEBONO
 	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
 	select MMC_SDHCI
 	select MMC_SDHCI_PLTFM
-	select MMC_SDHCI_OF_476GTR
 	select ATA
 	select SATA_AHCI_PLATFORM
 	help
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 455fd17..3f44f29 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -28,7 +28,7 @@ config COMMON_CLK_WM831X
 	depends on MFD_WM831X
 	---help---
           Supports the clocking subsystem of the WM831x/2x series of
-	  PMICs from Wolfson Microlectronics.
+	  PMICs from Wolfson Microelectronics.
 
 source "drivers/clk/versatile/Kconfig"
 
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 9bc2720..91ebe28 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -197,7 +197,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
 	if (ret) {
-		pr_err("%s: Failed to allocate resources\n: %d", __func__, ret);
+		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
 		return ret;
 	}
 
diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c
index 73b7396..997e61e 100644
--- a/drivers/gpio/gpio-msm-v1.c
+++ b/drivers/gpio/gpio-msm-v1.c
@@ -686,7 +686,7 @@ static int gpio_msm_v1_probe(struct platform_device *pdev)
 	irq_set_chained_handler(irq1, msm_gpio_irq_handler);
 	irq_set_chained_handler(irq2, msm_gpio_irq_handler);
 	irq_set_irq_wake(irq1, 1);
-	irq_set_irq_wake(irq2, 2);
+	irq_set_irq_wake(irq2, 1);
 	return 0;
 }
 
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
index 353263c..506a2ea 100644
--- a/drivers/gpio/gpio-spear-spics.c
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -204,5 +204,5 @@ static int __init spics_gpio_init(void)
 subsys_initcall(spics_gpio_init);
 
 MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
-MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
+MODULE_DESCRIPTION("STMicroelectronics SPEAr SPI Chip Select Abstraction");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c
index 4a85bb6..b928c17 100644
--- a/drivers/gpu/drm/radeon/mkregtable.c
+++ b/drivers/gpu/drm/radeon/mkregtable.c
@@ -347,7 +347,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_entry - get the struct for this entry
  * @ptr:	the &struct list_head pointer.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_entry(ptr, type, member) \
 	container_of(ptr, type, member)
@@ -356,7 +356,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_first_entry - get the first element from a list
  * @ptr:	the list head to take the element from.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Note, that list is expected to be not empty.
  */
@@ -406,7 +406,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry	-	iterate over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_entry((head)->next, typeof(*pos), member);	\
@@ -417,7 +417,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_reverse - iterate backwards over list of given type.
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_reverse(pos, head, member)			\
 	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
@@ -428,7 +428,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
  * @pos:	the type * to use as a start point
  * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
  */
@@ -439,7 +439,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue - continue iteration over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Continue to iterate over list of given type, continuing after
  * the current position.
@@ -453,7 +453,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue_reverse - iterate backwards from the given point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Start to iterate over list of given type backwards, continuing after
  * the current position.
@@ -467,7 +467,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing from current position.
  */
@@ -480,7 +480,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_entry((head)->next, typeof(*pos), member),	\
@@ -493,7 +493,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing after current point,
  * safe against removal of list entry.
@@ -509,7 +509,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type from current point, safe against
  * removal of list entry.
@@ -524,7 +524,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate backwards over list of given type, safe against removal
  * of list entry.
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 9f454d7..67c2187 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -1334,7 +1334,7 @@ init_card(struct l1oip *hc, int pri, int bundle)
 	if (id[l1oip_cnt] == 0) {
 		printk(KERN_WARNING "Warning: No 'id' value given or "
 		       "0, this is highly unsecure. Please use 32 "
-		       "bit randmom number 0x...\n");
+		       "bit random number 0x...\n");
 	}
 	hc->id = id[l1oip_cnt];
 	if (debug & DEBUG_L1OIP_INIT)
diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h
index dcfd7a1..207d6e82 100644
--- a/drivers/media/pci/cx18/cx18-driver.h
+++ b/drivers/media/pci/cx18/cx18-driver.h
@@ -290,7 +290,7 @@ struct cx18_options {
  * list_entry_is_past_end - check if a previous loop cursor is off list end
  * @pos:	the type * previously used as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Check if the entry's list_head is the head of the list, thus it's not a
  * real entry but was the loop cursor that walked past the end
diff --git a/drivers/media/pci/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c
index 2cb35c2..a4d8867 100644
--- a/drivers/media/pci/ttpci/budget-patch.c
+++ b/drivers/media/pci/ttpci/budget-patch.c
@@ -490,7 +490,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 	if(detected == 0)
 		printk("budget-patch not detected or saa7146 in non-default state.\n"
-		       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+		       "try enabling resetting of 7146 with MASK_31 in MC1 register\n");
 
 	else
 		printk("BUDGET-PATCH DETECTED.\n");
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 72fb86b..c9946c6 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
 
 MODULE_AUTHOR("Jie Yang");
 MODULE_AUTHOR("Qualcomm Atheros Inc., <nic-devel@qualcomm.com>");
-MODULE_DESCRIPTION("Qualcom Atheros 100/1000M Ethernet Network Driver");
+MODULE_DESCRIPTION("Qualcomm Atheros 100/1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ATL1C_DRV_VERSION);
 
diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c
index bddb791..ce5f22c 100644
--- a/drivers/pinctrl/spear/pinctrl-plgpio.c
+++ b/drivers/pinctrl/spear/pinctrl-plgpio.c
@@ -724,5 +724,5 @@ static int __init plgpio_init(void)
 subsys_initcall(plgpio_init);
 
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
-MODULE_DESCRIPTION("ST Microlectronics SPEAr PLGPIO driver");
+MODULE_DESCRIPTION("STMicroelectronics SPEAr PLGPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index c0242ed..ecd36e3 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -593,7 +593,7 @@ static void ips_disable_gpu_turbo(struct ips_driver *ips)
 		return;
 
 	if (!ips->gpu_turbo_disable())
-		dev_err(&ips->dev->dev, "failed to disable graphis turbo\n");
+		dev_err(&ips->dev->dev, "failed to disable graphics turbo\n");
 	else
 		ips->__gpu_turbo_on = false;
 }
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 327cb19..d3d1936 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1090,7 +1090,7 @@ tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
 				"channel path 0x%x on CU",
 				sense->fmt.f71.md[1]);
 		else
-			snprintf(service, BUFSIZE, "Repair will disable cannel"
+			snprintf(service, BUFSIZE, "Repair will disable channel"
 				" paths (0x%x-0x%x) on CU",
 				sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
 		break;
@@ -1481,7 +1481,7 @@ tape_3590_irq(struct tape_device *device, struct tape_request *request,
 	}
 
 	if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) {
-		DBF_EVENT(2, "cannel end\n");
+		DBF_EVENT(2, "channel end\n");
 		return TAPE_IO_PENDING;
 	}
 
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 3f63c63..6dcaed0 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -588,7 +588,7 @@ int isci_task_abort_task(struct sas_task *task)
 
 		ret = TMF_RESP_FUNC_COMPLETE;
 	} else {
-		/* Fill in the tmf stucture */
+		/* Fill in the tmf structure */
 		isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
 					       old_request);
 
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 953fd9b..1e85c07 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -166,7 +166,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
    XXX: Since bus errors in the PDMA routines never happen on my 
    computer, the bus error code is untested. 
    If the code works as intended, a bus error results in Pseudo-DMA 
-   beeing disabled, meaning that the driver switches to slow handshake. 
+   being disabled, meaning that the driver switches to slow handshake.
    If bus errors are NOT extremely rare, this has to be changed. 
 */
 
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index f05580e..ff283d2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -6783,7 +6783,7 @@ static int __init megasas_init(void)
 	rval = pci_register_driver(&megasas_pci_driver);
 
 	if (rval) {
-		printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
+		printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
 		goto err_pcidrv;
 	}
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index fa0567c..7f842c8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -224,7 +224,7 @@ struct mpt2_ioctl_eventreport {
 };
 
 /**
- * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
+ * struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
  * @hdr - generic header
  * @timeout - command timeout in seconds. (if zero then use driver default
  *  value).
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index b3b48b5..5298def 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -383,6 +383,7 @@ static int ps3rom_probe(struct ps3_system_bus_device *_dev)
 	if (!host) {
 		dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed\n",
 			__func__, __LINE__);
+		error = -ENOMEM;
 		goto fail_teardown;
 	}
 
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index e9186cd..33ac39bf 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -335,7 +335,7 @@ static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd,
 			desc += XCOPY_SEGMENT_DESC_LEN;
 			break;
 		default:
-			pr_err("XCOPY unspported segment descriptor"
+			pr_err("XCOPY unsupported segment descriptor"
 				"type: 0x%02x\n", desc[0]);
 			goto out;
 		}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 98f8bca..a26653f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -701,7 +701,7 @@ config PDC_CONSOLE
 	  Saying Y here will enable the software based PDC console to be 
 	  used as the system console.  This is useful for machines in 
 	  which the hardware based console has not been written yet.  The
-	  following steps must be competed to use the PDC console:
+	  following steps must be completed to use the PDC console:
 
 	    1. create the device entry (mknod /dev/ttyB0 c 11 0)
 	    2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 59ab62c..ea2b9c3 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -396,7 +396,7 @@ static int hidg_setup(struct usb_function *f,
 
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
 		  | HID_REQ_SET_REPORT):
-		VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
+		VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
 		goto stall;
 		break;
 
diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c
index ebf09f4..ff97ac93 100644
--- a/drivers/usb/gadget/legacy/zero.c
+++ b/drivers/usb/gadget/legacy/zero.c
@@ -28,7 +28,7 @@
  *
  * Why is *this* driver using two configurations, rather than setting up
  * two interfaces with different functions?  To help verify that multiple
- * configuration infrastucture is working correctly; also, so that it can
+ * configuration infrastructure is working correctly; also, so that it can
  * work with low capability USB controllers without four bulk endpoints.
  */
 
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
index f6459df..5e44407 100644
--- a/drivers/usb/host/ehci-sysfs.c
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -132,7 +132,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
 
 		if (allocated_max > uframe_periodic_max) {
 			ehci_info(ehci,
-				"cannot decrease uframe_periodic_max becase "
+				"cannot decrease uframe_periodic_max because "
 				"periodic bandwidth is already allocated "
 				"(%u > %u)\n",
 				allocated_max, uframe_periodic_max);
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 3de1278..ecf02b26 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -4958,7 +4958,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
 
 		if (allocated_max > uframe_periodic_max) {
 			fotg210_info(fotg210,
-				"cannot decrease uframe_periodic_max becase "
+				"cannot decrease uframe_periodic_max because "
 				"periodic bandwidth is already allocated "
 				"(%u > %u)\n",
 				allocated_max, uframe_periodic_max);
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index abe42f3..664d2aa 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -4893,7 +4893,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
 
 		if (allocated_max > uframe_periodic_max) {
 			fusbh200_info(fusbh200,
-				"cannot decrease uframe_periodic_max becase "
+				"cannot decrease uframe_periodic_max because "
 				"periodic bandwidth is already allocated "
 				"(%u > %u)\n",
 				allocated_max, uframe_periodic_max);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 7064eb8..8bfc47c 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -64,7 +64,7 @@ DEVICE(vivopay, VIVOPAY_IDS);
 /* Motorola USB Phone driver */
 #define MOTO_IDS()			\
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */	\
-	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */	\
+	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Motorola phone */	\
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */		\
 	{ USB_DEVICE(0x22b8, 0x2c84) },	/* Motorola VE240 phone */	\
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
index cee9602..716bfad 100644
--- a/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
@@ -570,5 +570,5 @@ static struct platform_driver exynos_mipi_dsi_driver = {
 module_platform_driver(exynos_mipi_dsi_driver);
 
 MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
-MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
+MODULE_DESCRIPTION("Samsung SoC MIPI-DSI driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
index 85edabf..2358a2f 100644
--- a/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
@@ -876,5 +876,5 @@ int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
 }
 
 MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
-MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
+MODULE_DESCRIPTION("Samsung SoC MIPI-DSI common driver");
 MODULE_LICENSE("GPL");
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index d571e17..9d6486d 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2772,7 +2772,7 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
 
 	if (journal_init_dev(sb, journal, j_dev_name) != 0) {
 		reiserfs_warning(sb, "sh-462",
-				 "unable to initialize jornal device");
+				 "unable to initialize journal device");
 		goto free_and_return;
 	}
 
diff --git a/include/linux/list.h b/include/linux/list.h
index f33f831..feb773c 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -346,7 +346,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_entry - get the struct for this entry
  * @ptr:	the &struct list_head pointer.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_entry(ptr, type, member) \
 	container_of(ptr, type, member)
@@ -355,7 +355,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_first_entry - get the first element from a list
  * @ptr:	the list head to take the element from.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Note, that list is expected to be not empty.
  */
@@ -366,7 +366,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_last_entry - get the last element from a list
  * @ptr:	the list head to take the element from.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Note, that list is expected to be not empty.
  */
@@ -377,7 +377,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_first_entry_or_null - get the first element from a list
  * @ptr:	the list head to take the element from.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Note that if the list is empty, it returns NULL.
  */
@@ -387,7 +387,7 @@ static inline void list_splice_tail_init(struct list_head *list,
 /**
  * list_next_entry - get the next element in list
  * @pos:	the type * to cursor
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_next_entry(pos, member) \
 	list_entry((pos)->member.next, typeof(*(pos)), member)
@@ -395,7 +395,7 @@ static inline void list_splice_tail_init(struct list_head *list,
 /**
  * list_prev_entry - get the prev element in list
  * @pos:	the type * to cursor
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_prev_entry(pos, member) \
 	list_entry((pos)->member.prev, typeof(*(pos)), member)
@@ -441,7 +441,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry	-	iterate over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_first_entry(head, typeof(*pos), member);	\
@@ -452,7 +452,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_reverse - iterate backwards over list of given type.
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_reverse(pos, head, member)			\
 	for (pos = list_last_entry(head, typeof(*pos), member);		\
@@ -463,7 +463,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
  * @pos:	the type * to use as a start point
  * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
  */
@@ -474,7 +474,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue - continue iteration over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Continue to iterate over list of given type, continuing after
  * the current position.
@@ -488,7 +488,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_continue_reverse - iterate backwards from the given point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Start to iterate over list of given type backwards, continuing after
  * the current position.
@@ -502,7 +502,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing from current position.
  */
@@ -515,7 +515,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_first_entry(head, typeof(*pos), member),	\
@@ -528,7 +528,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type, continuing after current point,
  * safe against removal of list entry.
@@ -544,7 +544,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate over list of given type from current point, safe against
  * removal of list entry.
@@ -559,7 +559,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Iterate backwards over list of given type, safe against removal
  * of list entry.
@@ -574,7 +574,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
  * @pos:	the loop cursor used in the list_for_each_entry_safe loop
  * @n:		temporary storage used in list_for_each_entry_safe
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * list_safe_reset_next is not safe to use in general if the list may be
  * modified concurrently (eg. the lock is dropped in the loop body). An
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 44eeef0..745def8 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -69,7 +69,7 @@ struct ieee1394_device_id {
  * @bDeviceClass: Class of device; numbers are assigned
  *	by the USB forum.  Products may choose to implement classes,
  *	or be vendor-specific.  Device classes specify behavior of all
- *	the interfaces on a devices.
+ *	the interfaces on a device.
  * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
  * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
  * @bInterfaceClass: Class of interface; numbers are assigned
diff --git a/include/linux/plist.h b/include/linux/plist.h
index 8b6c970..9788360 100644
--- a/include/linux/plist.h
+++ b/include/linux/plist.h
@@ -176,7 +176,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
  * plist_for_each_entry	- iterate over list of given type
  * @pos:	the type * to use as a loop counter
  * @head:	the head for your list
- * @mem:	the name of the list_struct within the struct
+ * @mem:	the name of the list_head within the struct
  */
 #define plist_for_each_entry(pos, head, mem)	\
 	 list_for_each_entry(pos, &(head)->node_list, mem.node_list)
@@ -185,7 +185,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
  * plist_for_each_entry_continue - continue iteration over list of given type
  * @pos:	the type * to use as a loop cursor
  * @head:	the head for your list
- * @m:		the name of the list_struct within the struct
+ * @m:		the name of the list_head within the struct
  *
  * Continue to iterate over list of given type, continuing after
  * the current position.
@@ -198,7 +198,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
  * @pos:	the type * to use as a loop counter
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list
- * @m:		the name of the list_struct within the struct
+ * @m:		the name of the list_head within the struct
  *
  * Iterate over list of given type, safe against removal of list entry.
  */
@@ -229,7 +229,7 @@ static inline int plist_node_empty(const struct plist_node *node)
  * plist_first_entry - get the struct for the first entry
  * @head:	the &struct plist_head pointer
  * @type:	the type of the struct this is embedded in
- * @member:	the name of the list_struct within the struct
+ * @member:	the name of the list_head within the struct
  */
 #ifdef CONFIG_DEBUG_PI_LIST
 # define plist_first_entry(head, type, member)	\
@@ -246,7 +246,7 @@ static inline int plist_node_empty(const struct plist_node *node)
  * plist_last_entry - get the struct for the last entry
  * @head:	the &struct plist_head pointer
  * @type:	the type of the struct this is embedded in
- * @member:	the name of the list_struct within the struct
+ * @member:	the name of the list_head within the struct
  */
 #ifdef CONFIG_DEBUG_PI_LIST
 # define plist_last_entry(head, type, member)	\
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index aa79b3c..529bc94 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -241,7 +241,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  * list_entry_rcu - get the struct for this entry
  * @ptr:        the &struct list_head pointer.
  * @type:       the type of the struct this is embedded in.
- * @member:     the name of the list_struct within the struct.
+ * @member:     the name of the list_head within the struct.
  *
  * This primitive may safely run concurrently with the _rcu list-mutation
  * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
@@ -278,7 +278,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  * list_first_or_null_rcu - get the first element from a list
  * @ptr:        the list head to take the element from.
  * @type:       the type of the struct this is embedded in.
- * @member:     the name of the list_struct within the struct.
+ * @member:     the name of the list_head within the struct.
  *
  * Note that if the list is empty, it returns NULL.
  *
@@ -296,7 +296,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as list_add_rcu()
@@ -311,7 +311,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  * list_for_each_entry_continue_rcu - continue iteration over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  *
  * Continue to iterate over list of given type, continuing after
  * the current position.
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index c8a462e..e939d2b 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -554,7 +554,7 @@ struct Scsi_Host {
 	 * __devices is protected by the host_lock, but you should
 	 * usually use scsi_device_lookup / shost_for_each_device
 	 * to access it and don't care about locking yourself.
-	 * In the rare case of beeing in irq context you can use
+	 * In the rare case of being in irq context you can use
 	 * their __ prefixed variants with the lock held. NEVER
 	 * access this list directly from a driver.
 	 */
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 2e949cc..b79f39b 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -792,7 +792,7 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 	/* Initialize mult/shift and max_idle_ns */
 	__clocksource_updatefreq_scale(cs, scale, freq);
 
-	/* Add clocksource to the clcoksource list */
+	/* Add clocksource to the clocksource list */
 	mutex_lock(&clocksource_mutex);
 	clocksource_enqueue(cs);
 	clocksource_enqueue_watchdog(cs);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 1af4f8f..ab76b7b 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2031,7 +2031,7 @@ void trace_printk_init_buffers(void)
 	pr_warning("** trace_printk() being used. Allocating extra memory.  **\n");
 	pr_warning("**                                                      **\n");
 	pr_warning("** This means that this is a DEBUG kernel and it is     **\n");
-	pr_warning("** unsafe for produciton use.                           **\n");
+	pr_warning("** unsafe for production use.                           **\n");
 	pr_warning("**                                                      **\n");
 	pr_warning("** If you see this message and you are not debugging    **\n");
 	pr_warning("** the kernel, report this immediately to your vendor!  **\n");
diff --git a/mm/zbud.c b/mm/zbud.c
index ecf1dbe..ec71b37 100644
--- a/mm/zbud.c
+++ b/mm/zbud.c
@@ -619,5 +619,5 @@ module_init(init_zbud);
 module_exit(exit_zbud);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Seth Jennings <sjenning@linux.vnet.ibm.com>");
+MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
 MODULE_DESCRIPTION("Buddy Allocator for Compressed Pages");
diff --git a/mm/zswap.c b/mm/zswap.c
index ea064c1..c154306 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -951,5 +951,5 @@ error:
 late_initcall(init_zswap);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Seth Jennings <sjenning@linux.vnet.ibm.com>");
+MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
 MODULE_DESCRIPTION("Compressed cache for swap pages");
diff --git a/scripts/kconfig/list.h b/scripts/kconfig/list.h
index 685d80e..2cf23f0 100644
--- a/scripts/kconfig/list.h
+++ b/scripts/kconfig/list.h
@@ -34,7 +34,7 @@ struct list_head {
  * list_entry - get the struct for this entry
  * @ptr:	the &struct list_head pointer.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_entry(ptr, type, member) \
 	container_of(ptr, type, member)
@@ -43,7 +43,7 @@ struct list_head {
  * list_for_each_entry	-	iterate over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_entry((head)->next, typeof(*pos), member);	\
@@ -55,7 +55,7 @@ struct list_head {
  * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_entry((head)->next, typeof(*pos), member),	\
diff --git a/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c b/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c
index af4b050..aaca1f4 100644
--- a/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c
+++ b/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c
@@ -342,7 +342,7 @@ int main(int argc, char *argv[])
 				iobuf[i].requested = ret;
 				printf("submit: %d requests buf: %d\n", ret, i);
 			} else
-				perror("unable to submit reqests");
+				perror("unable to submit requests");
 		}
 
 		/* if event is ready to read */
diff --git a/tools/usb/usbip/libsrc/list.h b/tools/usb/usbip/libsrc/list.h
index 8d0c936..5eaaa78 100644
--- a/tools/usb/usbip/libsrc/list.h
+++ b/tools/usb/usbip/libsrc/list.h
@@ -98,7 +98,7 @@ static inline void list_del(struct list_head *entry)
  * list_entry - get the struct for this entry
  * @ptr:	the &struct list_head pointer.
  * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
+ * @member:	the name of the list_head within the struct.
  */
 #define list_entry(ptr, type, member) \
 	container_of(ptr, type, member)