Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: synaptics - fix reporting of min coordinates
  Input: tegra-kbc - enable key autorepeat
  Input: kxtj9 - fix locking typo in kxtj9_set_poll()
  Input: kxtj9 - fix bug in probe()
  Input: intel-mid-touch - remove pointless checking for variable 'found'
  Input: hp_sdc - staticize hp_sdc_kicker()
  Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
  Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
  Input: cy8ctmg110_ts - constify i2c_device_id table
  Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
  Input: lifebook - make dmi callback functions return 1
  Input: atkbd - make dmi callback functions return 1
  Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
  Input: gpio_keys - add support for device-tree platform data
  Input: aiptek - remove double define
  Input: synaptics - set minimum coordinates as reported by firmware
  Input: synaptics - process button bits in AGM packets
  Input: synaptics - rename set_slot to be more descriptive
  Input: synaptics - fuzz position for touchpad with reduced filtering
  Input: synaptics - set resolution for MT_POSITION_X/Y axes
  ...

44 files changed, 1943 insertions, 317 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio_keys.txt b/Documentation/devicetree/bindings/gpio/gpio_keys.txt
new file mode 100644
index 0000000..7190c99
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_keys.txt
@@ -0,0 +1,36 @@
+Device-Tree bindings for input/gpio_keys.c keyboard driver
+
+Required properties:
+	- compatible = "gpio-keys";
+
+Optional properties:
+	- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem.
+
+Each button (key) is represented as a sub-node of "gpio-keys":
+Subnode properties:
+
+	- gpios: OF devcie-tree gpio specificatin.
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+
+Optional subnode-properties:
+	- linux,input-type: Specify event type this button/key generates.
+	  If not specified defaults to <1> == EV_KEY.
+	- debounce-interval: Debouncing interval time in milliseconds.
+	  If not specified defaults to 5.
+	- gpio-key,wakeup: Boolean, button can wake-up the system.
+
+Example nodes:
+
+	gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+			button@21 {
+				label = "GPIO Key UP";
+				linux,code = <103>;
+				gpios = <&gpio1 0 1>;
+			};
+			...
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 56abf3d..d728875 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -154,10 +154,13 @@ static const struct xpad_device {
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
@@ -236,9 +239,10 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
-	XPAD_XBOX360_VENDOR(0x1bad),		/* Rock Band Drums */
+	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
 	XPAD_XBOX360_VENDOR(0x0f0d),            /* Hori Controllers */
 	{ }
 };
@@ -545,7 +549,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 	struct usb_endpoint_descriptor *ep_irq_out;
 	int error;
 
-	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
+	if (xpad->xtype == XTYPE_UNKNOWN)
 		return 0;
 
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
@@ -579,13 +583,13 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 
 static void xpad_stop_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX)
+	if (xpad->xtype != XTYPE_UNKNOWN)
 		usb_kill_urb(xpad->irq_out);
 }
 
 static void xpad_deinit_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) {
+	if (xpad->xtype != XTYPE_UNKNOWN) {
 		usb_free_urb(xpad->irq_out);
 		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 				xpad->odata, xpad->odata_dma);
@@ -632,6 +636,23 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
 
+		case XTYPE_XBOX360W:
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x01;
+			xpad->odata[2] = 0x0F;
+			xpad->odata[3] = 0xC0;
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = strong / 256;
+			xpad->odata[6] = weak / 256;
+			xpad->odata[7] = 0x00;
+			xpad->odata[8] = 0x00;
+			xpad->odata[9] = 0x00;
+			xpad->odata[10] = 0x00;
+			xpad->odata[11] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 12;
+
+			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
 		default:
 			dbg("%s - rumble command sent to unsupported xpad type: %d",
 				__func__, xpad->xtype);
@@ -644,7 +665,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
-	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
+	if (xpad->xtype == XTYPE_UNKNOWN)
 		return 0;
 
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index af45d27..7b404e5 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index 6315986..c770826 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 11478eb..19cfc0c 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1578,14 +1578,14 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
 	atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
 	atkbd_platform_fixup_data = id->driver_data;
 
-	return 0;
+	return 1;
 }
 
 static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
 {
 	atkbd_platform_scancode_fixup = id->driver_data;
 
-	return 0;
+	return 1;
 }
 
 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 6e6145b..ce281d1 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -2,6 +2,7 @@
  * Driver for keys on GPIO lines capable of generating interrupts.
  *
  * Copyright 2005 Phil Blundell
+ * Copyright 2010, 2011 David Jander <david@protonic.nl>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,6 +26,8 @@
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
 
 struct gpio_button_data {
 	struct gpio_keys_button *button;
@@ -415,7 +418,7 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 	if (!button->can_disable)
 		irqflags |= IRQF_SHARED;
 
-	error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
+	error = request_threaded_irq(irq, NULL, gpio_keys_isr, irqflags, desc, bdata);
 	if (error < 0) {
 		dev_err(dev, "Unable to claim irq %d; error %d\n",
 			irq, error);
@@ -445,15 +448,120 @@ static void gpio_keys_close(struct input_dev *input)
 		ddata->disable(input->dev.parent);
 }
 
+/*
+ * Handlers for alternative sources of platform_data
+ */
+#ifdef CONFIG_OF
+/*
+ * Translate OpenFirmware node properties into platform_data
+ */
+static int gpio_keys_get_devtree_pdata(struct device *dev,
+			    struct gpio_keys_platform_data *pdata)
+{
+	struct device_node *node, *pp;
+	int i;
+	struct gpio_keys_button *buttons;
+	const u32 *reg;
+	int len;
+
+	node = dev->of_node;
+	if (node == NULL)
+		return -ENODEV;
+
+	memset(pdata, 0, sizeof *pdata);
+
+	pdata->rep = !!of_get_property(node, "autorepeat", &len);
+
+	/* First count the subnodes */
+	pdata->nbuttons = 0;
+	pp = NULL;
+	while ((pp = of_get_next_child(node, pp)))
+		pdata->nbuttons++;
+
+	if (pdata->nbuttons == 0)
+		return -ENODEV;
+
+	buttons = kzalloc(pdata->nbuttons * (sizeof *buttons), GFP_KERNEL);
+	if (!buttons)
+		return -ENODEV;
+
+	pp = NULL;
+	i = 0;
+	while ((pp = of_get_next_child(node, pp))) {
+		enum of_gpio_flags flags;
+
+		if (!of_find_property(pp, "gpios", NULL)) {
+			pdata->nbuttons--;
+			dev_warn(dev, "Found button without gpios\n");
+			continue;
+		}
+		buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags);
+		buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+		reg = of_get_property(pp, "linux,code", &len);
+		if (!reg) {
+			dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio);
+			goto out_fail;
+		}
+		buttons[i].code = be32_to_cpup(reg);
+
+		buttons[i].desc = of_get_property(pp, "label", &len);
+
+		reg = of_get_property(pp, "linux,input-type", &len);
+		buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY;
+
+		buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+
+		reg = of_get_property(pp, "debounce-interval", &len);
+		buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5;
+
+		i++;
+	}
+
+	pdata->buttons = buttons;
+
+	return 0;
+
+out_fail:
+	kfree(buttons);
+	return -ENODEV;
+}
+
+static struct of_device_id gpio_keys_of_match[] = {
+	{ .compatible = "gpio-keys", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_keys_of_match);
+
+#else
+
+static int gpio_keys_get_devtree_pdata(struct device *dev,
+			    struct gpio_keys_platform_data *altp)
+{
+	return -ENODEV;
+}
+
+#define gpio_keys_of_match NULL
+
+#endif
+
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
 {
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_keys_drvdata *ddata;
 	struct device *dev = &pdev->dev;
+	struct gpio_keys_platform_data alt_pdata;
 	struct input_dev *input;
 	int i, error;
 	int wakeup = 0;
 
+	if (!pdata) {
+		error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
+		if (error)
+			return error;
+		pdata = &alt_pdata;
+	}
+
 	ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
 			pdata->nbuttons * sizeof(struct gpio_button_data),
 			GFP_KERNEL);
@@ -544,13 +652,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail1:
 	input_free_device(input);
 	kfree(ddata);
+	/* If we have no platform_data, we allocated buttons dynamically. */
+	if (!pdev->dev.platform_data)
+		kfree(pdata->buttons);
 
 	return error;
 }
 
 static int __devexit gpio_keys_remove(struct platform_device *pdev)
 {
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
 	struct input_dev *input = ddata->input;
 	int i;
@@ -559,31 +669,39 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < pdata->nbuttons; i++) {
-		int irq = gpio_to_irq(pdata->buttons[i].gpio);
+	for (i = 0; i < ddata->n_buttons; i++) {
+		int irq = gpio_to_irq(ddata->data[i].button->gpio);
 		free_irq(irq, &ddata->data[i]);
 		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
-		gpio_free(pdata->buttons[i].gpio);
+		gpio_free(ddata->data[i].button->gpio);
 	}
 
 	input_unregister_device(input);
 
+	/*
+	 * If we had no platform_data, we allocated buttons dynamically, and
+	 * must free them here. ddata->data[0].button is the pointer to the
+	 * beginning of the allocated array.
+	 */
+	if (!pdev->dev.platform_data)
+		kfree(ddata->data[0].button);
+
+	kfree(ddata);
+
 	return 0;
 }
 
-
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int gpio_keys_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
 	int i;
 
-	if (device_may_wakeup(&pdev->dev)) {
-		for (i = 0; i < pdata->nbuttons; i++) {
-			struct gpio_keys_button *button = &pdata->buttons[i];
+	if (device_may_wakeup(dev)) {
+		for (i = 0; i < ddata->n_buttons; i++) {
+			struct gpio_keys_button *button = ddata->data[i].button;
 			if (button->wakeup) {
 				int irq = gpio_to_irq(button->gpio);
 				enable_irq_wake(irq);
@@ -596,15 +714,13 @@ static int gpio_keys_suspend(struct device *dev)
 
 static int gpio_keys_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
 	int i;
 
-	for (i = 0; i < pdata->nbuttons; i++) {
+	for (i = 0; i < ddata->n_buttons; i++) {
 
-		struct gpio_keys_button *button = &pdata->buttons[i];
-		if (button->wakeup && device_may_wakeup(&pdev->dev)) {
+		struct gpio_keys_button *button = ddata->data[i].button;
+		if (button->wakeup && device_may_wakeup(dev)) {
 			int irq = gpio_to_irq(button->gpio);
 			disable_irq_wake(irq);
 		}
@@ -615,22 +731,18 @@ static int gpio_keys_resume(struct device *dev)
 
 	return 0;
 }
-
-static const struct dev_pm_ops gpio_keys_pm_ops = {
-	.suspend	= gpio_keys_suspend,
-	.resume		= gpio_keys_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
+
 static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
 	.remove		= __devexit_p(gpio_keys_remove),
 	.driver		= {
 		.name	= "gpio-keys",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &gpio_keys_pm_ops,
-#endif
+		.of_match_table = gpio_keys_of_match,
 	}
 };
 
@@ -644,10 +756,10 @@ static void __exit gpio_keys_exit(void)
 	platform_driver_unregister(&gpio_keys_device_driver);
 }
 
-module_init(gpio_keys_init);
+late_initcall(gpio_keys_init);
 module_exit(gpio_keys_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
-MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs");
+MODULE_DESCRIPTION("Keyboard driver for GPIOs");
 MODULE_ALIAS("platform:gpio-keys");
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 71f744a8..ab0acaf 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -146,7 +146,6 @@ struct lm8323_chip {
 	/* device lock */
 	struct mutex		lock;
 	struct i2c_client	*client;
-	struct work_struct	work;
 	struct input_dev	*idev;
 	bool			kp_enabled;
 	bool			pm_suspend;
@@ -162,7 +161,6 @@ struct lm8323_chip {
 
 #define client_to_lm8323(c)	container_of(c, struct lm8323_chip, client)
 #define dev_to_lm8323(d)	container_of(d, struct lm8323_chip, client->dev)
-#define work_to_lm8323(w)	container_of(w, struct lm8323_chip, work)
 #define cdev_to_pwm(c)		container_of(c, struct lm8323_pwm, cdev)
 #define work_to_pwm(w)		container_of(w, struct lm8323_pwm, work)
 
@@ -375,9 +373,9 @@ static void pwm_done(struct lm8323_pwm *pwm)
  * Bottom half: handle the interrupt by posting key events, or dealing with
  * errors appropriately.
  */
-static void lm8323_work(struct work_struct *work)
+static irqreturn_t lm8323_irq(int irq, void *_lm)
 {
-	struct lm8323_chip *lm = work_to_lm8323(work);
+	struct lm8323_chip *lm = _lm;
 	u8 ints;
 	int i;
 
@@ -409,16 +407,6 @@ static void lm8323_work(struct work_struct *work)
 	}
 
 	mutex_unlock(&lm->lock);
-}
-
-/*
- * We cannot use I2C in interrupt context, so we just schedule work.
- */
-static irqreturn_t lm8323_irq(int irq, void *data)
-{
-	struct lm8323_chip *lm = data;
-
-	schedule_work(&lm->work);
 
 	return IRQ_HANDLED;
 }
@@ -675,7 +663,6 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 	lm->client = client;
 	lm->idev = idev;
 	mutex_init(&lm->lock);
-	INIT_WORK(&lm->work, lm8323_work);
 
 	lm->size_x = pdata->size_x;
 	lm->size_y = pdata->size_y;
@@ -746,9 +733,8 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail3;
 	}
 
-	err = request_irq(client->irq, lm8323_irq,
-			  IRQF_TRIGGER_FALLING | IRQF_DISABLED,
-			  "lm8323", lm);
+	err = request_threaded_irq(client->irq, NULL, lm8323_irq,
+			  IRQF_TRIGGER_LOW|IRQF_ONESHOT, "lm8323", lm);
 	if (err) {
 		dev_err(&client->dev, "could not get IRQ %d\n", client->irq);
 		goto fail4;
@@ -783,7 +769,6 @@ static int __devexit lm8323_remove(struct i2c_client *client)
 
 	disable_irq_wake(client->irq);
 	free_irq(client->irq, lm);
-	cancel_work_sync(&lm->work);
 
 	input_unregister_device(lm->idev);
 
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 0a9e811..1c1615d 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -43,14 +43,15 @@
  * enabled capacitance sensing inputs and its run/suspend mode.
  */
 #define ELECTRODE_CONF_ADDR		0x5e
+#define ELECTRODE_CONF_QUICK_CHARGE	0x80
 #define AUTO_CONFIG_CTRL_ADDR		0x7b
 #define AUTO_CONFIG_USL_ADDR		0x7d
 #define AUTO_CONFIG_LSL_ADDR		0x7e
 #define AUTO_CONFIG_TL_ADDR		0x7f
 
 /* Threshold of touch/release trigger */
-#define TOUCH_THRESHOLD			0x0f
-#define RELEASE_THRESHOLD		0x0a
+#define TOUCH_THRESHOLD			0x08
+#define RELEASE_THRESHOLD		0x05
 /* Masks for touch and release triggers */
 #define TOUCH_STATUS_MASK		0xfff
 /* MPR121 has 12 keys */
@@ -127,7 +128,7 @@ static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata,
 				      struct i2c_client *client)
 {
 	const struct mpr121_init_register *reg;
-	unsigned char usl, lsl, tl;
+	unsigned char usl, lsl, tl, eleconf;
 	int i, t, vdd, ret;
 
 	/* Set up touch/release threshold for ele0-ele11 */
@@ -163,8 +164,15 @@ static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata,
 	ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
 	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
 	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
+
+	/*
+	 * Quick charge bit will let the capacitive charge to ready
+	 * state quickly, or the buttons may not function after system
+	 * boot.
+	 */
+	eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
 	ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
-					 mpr121->keycount);
+					 eleconf);
 	if (ret != 0)
 		goto err_i2c_write;
 
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 6229c3e..e7cc51d 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -700,9 +700,9 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
 	return 0;
 
 err_pmic_reg_read:
-	free_irq(kp->key_stuck_irq, NULL);
+	free_irq(kp->key_stuck_irq, kp);
 err_req_stuck_irq:
-	free_irq(kp->key_sense_irq, NULL);
+	free_irq(kp->key_sense_irq, kp);
 err_gpio_config:
 err_get_irq:
 	input_free_device(kp->input);
@@ -717,8 +717,8 @@ static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev)
 	struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
 
 	device_init_wakeup(&pdev->dev, 0);
-	free_irq(kp->key_stuck_irq, NULL);
-	free_irq(kp->key_sense_irq, NULL);
+	free_irq(kp->key_stuck_irq, kp);
+	free_irq(kp->key_sense_irq, kp);
 	input_unregister_device(kp->input);
 	kfree(kp);
 
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index ca7b891..b21bf5b 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -239,8 +239,6 @@ static int __devexit qt1070_remove(struct i2c_client *client)
 	input_unregister_device(data->input);
 	kfree(data);
 
-	i2c_set_clientdata(client, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 6876700..934aeb583 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -291,7 +291,7 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#if CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
 static int sh_keysc_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 2b3b73e..da3828f 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -657,7 +657,7 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 
 	input_set_drvdata(input_dev, kbc);
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	input_dev->keycode = kbc->keycode;
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index c8f097a..1c58681 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -337,5 +337,5 @@ module_exit(keypad_exit);
 
 MODULE_AUTHOR("Cyril Chemparathy");
 MODULE_DESCRIPTION("TNETV107X Keypad Driver");
-MODULE_ALIAS("platform: tnetv107x-keypad");
+MODULE_ALIAS("platform:tnetv107x-keypad");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d1bf872..c9104bb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -100,6 +100,27 @@ config INPUT_MAX8925_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called max8925_onkey.
 
+config INPUT_MMA8450
+	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support Freescale's MMA8450 Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mma8450.
+
+config INPUT_MPU3050
+	tristate "MPU3050 Triaxial gyroscope sensor"
+	depends on I2C
+	help
+	  Say Y here if you want to support InvenSense MPU3050
+	  connected via an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mpu3050.
+
 config INPUT_APANEL
 	tristate "Fujitsu Lifebook Application Panel buttons"
 	depends on X86 && I2C && LEDS_CLASS
@@ -209,6 +230,23 @@ config INPUT_KEYSPAN_REMOTE
 	  To compile this driver as a module, choose M here: the module will
 	  be called keyspan_remote.
 
+config INPUT_KXTJ9
+	tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+	depends on I2C
+	help
+	  Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
+	  accelerometer.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxtj9.
+
+config INPUT_KXTJ9_POLLED_MODE
+	bool "Enable polling mode support"
+	depends on INPUT_KXTJ9
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you need accelerometer to work in polling mode.
+
 config INPUT_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4da7c3a..299ad5e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,8 +25,11 @@ obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
+obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
+obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
+obj-$(CONFIG_INPUT_MPU3050)		+= mpu3050.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
@@ -46,4 +49,3 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
-
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index 4f72bdd..d00edc9 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
new file mode 100644
index 0000000..c456f63
--- /dev/null
+++ b/drivers/input/misc/kxtj9.c
@@ -0,0 +1,671 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input/kxtj9.h>
+#include <linux/input-polldev.h>
+
+#define NAME			"kxtj9"
+#define G_MAX			8000
+/* OUTPUT REGISTERS */
+#define XOUT_L			0x06
+#define WHO_AM_I		0x0F
+/* CONTROL REGISTERS */
+#define INT_REL			0x1A
+#define CTRL_REG1		0x1B
+#define INT_CTRL1		0x1E
+#define DATA_CTRL		0x21
+/* CONTROL REGISTER 1 BITS */
+#define PC1_OFF			0x7F
+#define PC1_ON			(1 << 7)
+/* Data ready funtion enable bit: set during probe if using irq mode */
+#define DRDYE			(1 << 5)
+/* INTERRUPT CONTROL REGISTER 1 BITS */
+/* Set these during probe if using irq mode */
+#define KXTJ9_IEL		(1 << 3)
+#define KXTJ9_IEA		(1 << 4)
+#define KXTJ9_IEN		(1 << 5)
+/* INPUT_ABS CONSTANTS */
+#define FUZZ			3
+#define FLAT			3
+/* RESUME STATE INDICES */
+#define RES_DATA_CTRL		0
+#define RES_CTRL_REG1		1
+#define RES_INT_CTRL1		2
+#define RESUME_ENTRIES		3
+
+/*
+ * The following table lists the maximum appropriate poll interval for each
+ * available output data rate.
+ */
+static const struct {
+	unsigned int cutoff;
+	u8 mask;
+} kxtj9_odr_table[] = {
+	{ 3,	ODR800F },
+	{ 5,	ODR400F },
+	{ 10,	ODR200F },
+	{ 20,	ODR100F },
+	{ 40,	ODR50F  },
+	{ 80,	ODR25F  },
+	{ 0,	ODR12_5F},
+};
+
+struct kxtj9_data {
+	struct i2c_client *client;
+	struct kxtj9_platform_data pdata;
+	struct input_dev *input_dev;
+#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE
+	struct input_polled_dev *poll_dev;
+#endif
+	unsigned int last_poll_interval;
+	u8 shift;
+	u8 ctrl_reg1;
+	u8 data_ctrl;
+	u8 int_ctrl;
+};
+
+static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr = tj9->client->addr,
+			.flags = tj9->client->flags,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = tj9->client->addr,
+			.flags = tj9->client->flags | I2C_M_RD,
+			.len = len,
+			.buf = data,
+		},
+	};
+
+	return i2c_transfer(tj9->client->adapter, msgs, 2);
+}
+
+static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9)
+{
+	s16 acc_data[3]; /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
+	s16 x, y, z;
+	int err;
+
+	err = kxtj9_i2c_read(tj9, XOUT_L, (u8 *)acc_data, 6);
+	if (err < 0)
+		dev_err(&tj9->client->dev, "accelerometer data read failed\n");
+
+	x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]) >> tj9->shift;
+	y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]) >> tj9->shift;
+	z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]) >> tj9->shift;
+
+	input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x);
+	input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y);
+	input_report_abs(tj9->input_dev, ABS_Z, tj9->pdata.negate_z ? -z : z);
+	input_sync(tj9->input_dev);
+}
+
+static irqreturn_t kxtj9_isr(int irq, void *dev)
+{
+	struct kxtj9_data *tj9 = dev;
+	int err;
+
+	/* data ready is the only possible interrupt type */
+	kxtj9_report_acceleration_data(tj9);
+
+	err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
+	if (err < 0)
+		dev_err(&tj9->client->dev,
+			"error clearing interrupt status: %d\n", err);
+
+	return IRQ_HANDLED;
+}
+
+static int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
+{
+	switch (new_g_range) {
+	case KXTJ9_G_2G:
+		tj9->shift = 4;
+		break;
+	case KXTJ9_G_4G:
+		tj9->shift = 3;
+		break;
+	case KXTJ9_G_8G:
+		tj9->shift = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tj9->ctrl_reg1 &= 0xe7;
+	tj9->ctrl_reg1 |= new_g_range;
+
+	return 0;
+}
+
+static int kxtj9_update_odr(struct kxtj9_data *tj9, unsigned int poll_interval)
+{
+	int err;
+	int i;
+
+	/* Use the lowest ODR that can support the requested poll interval */
+	for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) {
+		tj9->data_ctrl = kxtj9_odr_table[i].mask;
+		if (poll_interval < kxtj9_odr_table[i].cutoff)
+			break;
+	}
+
+	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(tj9->client, DATA_CTRL, tj9->data_ctrl);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int kxtj9_device_power_on(struct kxtj9_data *tj9)
+{
+	if (tj9->pdata.power_on)
+		return tj9->pdata.power_on();
+
+	return 0;
+}
+
+static void kxtj9_device_power_off(struct kxtj9_data *tj9)
+{
+	int err;
+
+	tj9->ctrl_reg1 &= PC1_OFF;
+	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+	if (err < 0)
+		dev_err(&tj9->client->dev, "soft power off failed\n");
+
+	if (tj9->pdata.power_off)
+		tj9->pdata.power_off();
+}
+
+static int kxtj9_enable(struct kxtj9_data *tj9)
+{
+	int err;
+
+	err = kxtj9_device_power_on(tj9);
+	if (err < 0)
+		return err;
+
+	/* ensure that PC1 is cleared before updating control registers */
+	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
+	if (err < 0)
+		return err;
+
+	/* only write INT_CTRL_REG1 if in irq mode */
+	if (tj9->client->irq) {
+		err = i2c_smbus_write_byte_data(tj9->client,
+						INT_CTRL1, tj9->int_ctrl);
+		if (err < 0)
+			return err;
+	}
+
+	err = kxtj9_update_g_range(tj9, tj9->pdata.g_range);
+	if (err < 0)
+		return err;
+
+	/* turn on outputs */
+	tj9->ctrl_reg1 |= PC1_ON;
+	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+	if (err < 0)
+		return err;
+
+	err = kxtj9_update_odr(tj9, tj9->last_poll_interval);
+	if (err < 0)
+		return err;
+
+	/* clear initial interrupt if in irq mode */
+	if (tj9->client->irq) {
+		err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
+		if (err < 0) {
+			dev_err(&tj9->client->dev,
+				"error clearing interrupt: %d\n", err);
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	kxtj9_device_power_off(tj9);
+	return err;
+}
+
+static void kxtj9_disable(struct kxtj9_data *tj9)
+{
+	kxtj9_device_power_off(tj9);
+}
+
+static int kxtj9_input_open(struct input_dev *input)
+{
+	struct kxtj9_data *tj9 = input_get_drvdata(input);
+
+	return kxtj9_enable(tj9);
+}
+
+static void kxtj9_input_close(struct input_dev *dev)
+{
+	struct kxtj9_data *tj9 = input_get_drvdata(dev);
+
+	kxtj9_disable(tj9);
+}
+
+static void __devinit kxtj9_init_input_device(struct kxtj9_data *tj9,
+					      struct input_dev *input_dev)
+{
+	__set_bit(EV_ABS, input_dev->evbit);
+	input_set_abs_params(input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
+	input_set_abs_params(input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
+	input_set_abs_params(input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
+
+	input_dev->name = "kxtj9_accel";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &tj9->client->dev;
+}
+
+static int __devinit kxtj9_setup_input_device(struct kxtj9_data *tj9)
+{
+	struct input_dev *input_dev;
+	int err;
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&tj9->client->dev, "input device allocate failed\n");
+		return -ENOMEM;
+	}
+
+	tj9->input_dev = input_dev;
+
+	input_dev->open = kxtj9_input_open;
+	input_dev->close = kxtj9_input_close;
+	input_set_drvdata(input_dev, tj9);
+
+	kxtj9_init_input_device(tj9, input_dev);
+
+	err = input_register_device(tj9->input_dev);
+	if (err) {
+		dev_err(&tj9->client->dev,
+			"unable to register input polled device %s: %d\n",
+			tj9->input_dev->name, err);
+		input_free_device(tj9->input_dev);
+		return err;
+	}
+
+	return 0;
+}
+
+/*
+ * When IRQ mode is selected, we need to provide an interface to allow the user
+ * to change the output data rate of the part.  For consistency, we are using
+ * the set_poll method, which accepts a poll interval in milliseconds, and then
+ * calls update_odr() while passing this value as an argument.  In IRQ mode, the
+ * data outputs will not be read AT the requested poll interval, rather, the
+ * lowest ODR that can support the requested interval.  The client application
+ * will be responsible for retrieving data from the input node at the desired
+ * interval.
+ */
+
+/* Returns currently selected poll interval (in ms) */
+static ssize_t kxtj9_get_poll(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", tj9->last_poll_interval);
+}
+
+/* Allow users to select a new poll interval (in ms) */
+static ssize_t kxtj9_set_poll(struct device *dev, struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+	struct input_dev *input_dev = tj9->input_dev;
+	unsigned int interval;
+	int error;
+
+	error = kstrtouint(buf, 10, &interval);
+	if (error < 0)
+		return error;
+
+	/* Lock the device to prevent races with open/close (and itself) */
+	mutex_lock(&input_dev->mutex);
+
+	disable_irq(client->irq);
+
+	/*
+	 * Set current interval to the greater of the minimum interval or
+	 * the requested interval
+	 */
+	tj9->last_poll_interval = max(interval, tj9->pdata.min_interval);
+
+	kxtj9_update_odr(tj9, tj9->last_poll_interval);
+
+	enable_irq(client->irq);
+	mutex_unlock(&input_dev->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(poll, S_IRUGO|S_IWUSR, kxtj9_get_poll, kxtj9_set_poll);
+
+static struct attribute *kxtj9_attributes[] = {
+	&dev_attr_poll.attr,
+	NULL
+};
+
+static struct attribute_group kxtj9_attribute_group = {
+	.attrs = kxtj9_attributes
+};
+
+
+#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE
+static void kxtj9_poll(struct input_polled_dev *dev)
+{
+	struct kxtj9_data *tj9 = dev->private;
+	unsigned int poll_interval = dev->poll_interval;
+
+	kxtj9_report_acceleration_data(tj9);
+
+	if (poll_interval != tj9->last_poll_interval) {
+		kxtj9_update_odr(tj9, poll_interval);
+		tj9->last_poll_interval = poll_interval;
+	}
+}
+
+static void kxtj9_polled_input_open(struct input_polled_dev *dev)
+{
+	struct kxtj9_data *tj9 = dev->private;
+
+	kxtj9_enable(tj9);
+}
+
+static void kxtj9_polled_input_close(struct input_polled_dev *dev)
+{
+	struct kxtj9_data *tj9 = dev->private;
+
+	kxtj9_disable(tj9);
+}
+
+static int __devinit kxtj9_setup_polled_device(struct kxtj9_data *tj9)
+{
+	int err;
+	struct input_polled_dev *poll_dev;
+	poll_dev = input_allocate_polled_device();
+
+	if (!poll_dev) {
+		dev_err(&tj9->client->dev,
+			"Failed to allocate polled device\n");
+		return -ENOMEM;
+	}
+
+	tj9->poll_dev = poll_dev;
+	tj9->input_dev = poll_dev->input;
+
+	poll_dev->private = tj9;
+	poll_dev->poll = kxtj9_poll;
+	poll_dev->open = kxtj9_polled_input_open;
+	poll_dev->close = kxtj9_polled_input_close;
+
+	kxtj9_init_input_device(tj9, poll_dev->input);
+
+	err = input_register_polled_device(poll_dev);
+	if (err) {
+		dev_err(&tj9->client->dev,
+			"Unable to register polled device, err=%d\n", err);
+		input_free_polled_device(poll_dev);
+		return err;
+	}
+
+	return 0;
+}
+
+static void __devexit kxtj9_teardown_polled_device(struct kxtj9_data *tj9)
+{
+	input_unregister_polled_device(tj9->poll_dev);
+	input_free_polled_device(tj9->poll_dev);
+}
+
+#else
+
+static inline int kxtj9_setup_polled_device(struct kxtj9_data *tj9)
+{
+	return -ENOSYS;
+}
+
+static inline void kxtj9_teardown_polled_device(struct kxtj9_data *tj9)
+{
+}
+
+#endif
+
+static int __devinit kxtj9_verify(struct kxtj9_data *tj9)
+{
+	int retval;
+
+	retval = kxtj9_device_power_on(tj9);
+	if (retval < 0)
+		return retval;
+
+	retval = i2c_smbus_read_byte_data(tj9->client, WHO_AM_I);
+	if (retval < 0) {
+		dev_err(&tj9->client->dev, "read err int source\n");
+		goto out;
+	}
+
+	retval = retval != 0x06 ? -EIO : 0;
+
+out:
+	kxtj9_device_power_off(tj9);
+	return retval;
+}
+
+static int __devinit kxtj9_probe(struct i2c_client *client,
+				 const struct i2c_device_id *id)
+{
+	const struct kxtj9_platform_data *pdata = client->dev.platform_data;
+	struct kxtj9_data *tj9;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "client is not i2c capable\n");
+		return -ENXIO;
+	}
+
+	if (!pdata) {
+		dev_err(&client->dev, "platform data is NULL; exiting\n");
+		return -EINVAL;
+	}
+
+	tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL);
+	if (!tj9) {
+		dev_err(&client->dev,
+			"failed to allocate memory for module data\n");
+		return -ENOMEM;
+	}
+
+	tj9->client = client;
+	tj9->pdata = *pdata;
+
+	if (pdata->init) {
+		err = pdata->init();
+		if (err < 0)
+			goto err_free_mem;
+	}
+
+	err = kxtj9_verify(tj9);
+	if (err < 0) {
+		dev_err(&client->dev, "device not recognized\n");
+		goto err_pdata_exit;
+	}
+
+	i2c_set_clientdata(client, tj9);
+
+	tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range;
+	tj9->data_ctrl = tj9->pdata.data_odr_init;
+
+	if (client->irq) {
+		/* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */
+		tj9->int_ctrl |= KXTJ9_IEN | KXTJ9_IEA | KXTJ9_IEL;
+		tj9->ctrl_reg1 |= DRDYE;
+
+		err = kxtj9_setup_input_device(tj9);
+		if (err)
+			goto err_pdata_exit;
+
+		err = request_threaded_irq(client->irq, NULL, kxtj9_isr,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "kxtj9-irq", tj9);
+		if (err) {
+			dev_err(&client->dev, "request irq failed: %d\n", err);
+			goto err_destroy_input;
+		}
+
+		err = sysfs_create_group(&client->dev.kobj, &kxtj9_attribute_group);
+		if (err) {
+			dev_err(&client->dev, "sysfs create failed: %d\n", err);
+			goto err_free_irq;
+		}
+
+	} else {
+		err = kxtj9_setup_polled_device(tj9);
+		if (err)
+			goto err_pdata_exit;
+	}
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, tj9);
+err_destroy_input:
+	input_unregister_device(tj9->input_dev);
+err_pdata_exit:
+	if (tj9->pdata.exit)
+		tj9->pdata.exit();
+err_free_mem:
+	kfree(tj9);
+	return err;
+}
+
+static int __devexit kxtj9_remove(struct i2c_client *client)
+{
+	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+	if (client->irq) {
+		sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+		free_irq(client->irq, tj9);
+		input_unregister_device(tj9->input_dev);
+	} else {
+		kxtj9_teardown_polled_device(tj9);
+	}
+
+	if (tj9->pdata.exit)
+		tj9->pdata.exit();
+
+	kfree(tj9);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int kxtj9_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+	struct input_dev *input_dev = tj9->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		kxtj9_disable(tj9);
+
+	mutex_unlock(&input_dev->mutex);
+	return 0;
+}
+
+static int kxtj9_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+	struct input_dev *input_dev = tj9->input_dev;
+	int retval = 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		kxtj9_enable(tj9);
+
+	mutex_unlock(&input_dev->mutex);
+	return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume);
+
+static const struct i2c_device_id kxtj9_id[] = {
+	{ NAME, 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, kxtj9_id);
+
+static struct i2c_driver kxtj9_driver = {
+	.driver = {
+		.name	= NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &kxtj9_pm_ops,
+	},
+	.probe		= kxtj9_probe,
+	.remove		= __devexit_p(kxtj9_remove),
+	.id_table	= kxtj9_id,
+};
+
+static int __init kxtj9_init(void)
+{
+	return i2c_add_driver(&kxtj9_driver);
+}
+module_init(kxtj9_init);
+
+static void __exit kxtj9_exit(void)
+{
+	i2c_del_driver(&kxtj9_driver);
+}
+module_exit(kxtj9_exit);
+
+MODULE_DESCRIPTION("KXTJ9 accelerometer driver");
+MODULE_AUTHOR("Chris Hudson <chudson@kionix.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c
new file mode 100644
index 0000000..20f8f92
--- /dev/null
+++ b/drivers/input/misc/mma8450.c
@@ -0,0 +1,256 @@
+/*
+ *  Driver for Freescale's 3-Axis Accelerometer MMA8450
+ *
+ *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input-polldev.h>
+
+#define MMA8450_DRV_NAME	"mma8450"
+
+#define MODE_CHANGE_DELAY_MS	100
+#define POLL_INTERVAL		100
+#define POLL_INTERVAL_MAX	500
+
+/* register definitions */
+#define MMA8450_STATUS		0x00
+#define MMA8450_STATUS_ZXYDR	0x08
+
+#define MMA8450_OUT_X8		0x01
+#define MMA8450_OUT_Y8		0x02
+#define MMA8450_OUT_Z8		0x03
+
+#define MMA8450_OUT_X_LSB	0x05
+#define MMA8450_OUT_X_MSB	0x06
+#define MMA8450_OUT_Y_LSB	0x07
+#define MMA8450_OUT_Y_MSB	0x08
+#define MMA8450_OUT_Z_LSB	0x09
+#define MMA8450_OUT_Z_MSB	0x0a
+
+#define MMA8450_XYZ_DATA_CFG	0x16
+
+#define MMA8450_CTRL_REG1	0x38
+#define MMA8450_CTRL_REG2	0x39
+
+/* mma8450 status */
+struct mma8450 {
+	struct i2c_client	*client;
+	struct input_polled_dev	*idev;
+};
+
+static int mma8450_read(struct mma8450 *m, unsigned off)
+{
+	struct i2c_client *c = m->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(c, off);
+	if (ret < 0)
+		dev_err(&c->dev,
+			"failed to read register 0x%02x, error %d\n",
+			off, ret);
+
+	return ret;
+}
+
+static int mma8450_write(struct mma8450 *m, unsigned off, u8 v)
+{
+	struct i2c_client *c = m->client;
+	int error;
+
+	error = i2c_smbus_write_byte_data(c, off, v);
+	if (error < 0) {
+		dev_err(&c->dev,
+			"failed to write to register 0x%02x, error %d\n",
+			off, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z)
+{
+	struct i2c_client *c = m->client;
+	u8 buff[6];
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff);
+	if (err < 0) {
+		dev_err(&c->dev,
+			"failed to read block data at 0x%02x, error %d\n",
+			MMA8450_OUT_X_LSB, err);
+		return err;
+	}
+
+	*x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf);
+	*y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf);
+	*z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf);
+
+	return 0;
+}
+
+static void mma8450_poll(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+	int x, y, z;
+	int ret;
+	int err;
+
+	ret = mma8450_read(m, MMA8450_STATUS);
+	if (ret < 0)
+		return;
+
+	if (!(ret & MMA8450_STATUS_ZXYDR))
+		return;
+
+	err = mma8450_read_xyz(m, &x, &y, &z);
+	if (err)
+		return;
+
+	input_report_abs(dev->input, ABS_X, x);
+	input_report_abs(dev->input, ABS_Y, y);
+	input_report_abs(dev->input, ABS_Z, z);
+	input_sync(dev->input);
+}
+
+/* Initialize the MMA8450 chip */
+static void mma8450_open(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+	int err;
+
+	/* enable all events from X/Y/Z, no FIFO */
+	err = mma8450_write(m, MMA8450_XYZ_DATA_CFG, 0x07);
+	if (err)
+		return;
+
+	/*
+	 * Sleep mode poll rate - 50Hz
+	 * System output data rate - 400Hz
+	 * Full scale selection - Active, +/- 2G
+	 */
+	err = mma8450_write(m, MMA8450_CTRL_REG1, 0x01);
+	if (err < 0)
+		return;
+
+	msleep(MODE_CHANGE_DELAY_MS);
+}
+
+static void mma8450_close(struct input_polled_dev *dev)
+{
+	struct mma8450 *m = dev->private;
+
+	mma8450_write(m, MMA8450_CTRL_REG1, 0x00);
+	mma8450_write(m, MMA8450_CTRL_REG2, 0x01);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int __devinit mma8450_probe(struct i2c_client *c,
+				   const struct i2c_device_id *id)
+{
+	struct input_polled_dev *idev;
+	struct mma8450 *m;
+	int err;
+
+	m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
+	idev = input_allocate_polled_device();
+	if (!m || !idev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	m->client = c;
+	m->idev = idev;
+
+	idev->private		= m;
+	idev->input->name	= MMA8450_DRV_NAME;
+	idev->input->id.bustype	= BUS_I2C;
+	idev->poll		= mma8450_poll;
+	idev->poll_interval	= POLL_INTERVAL;
+	idev->poll_interval_max	= POLL_INTERVAL_MAX;
+	idev->open		= mma8450_open;
+	idev->close		= mma8450_close;
+
+	__set_bit(EV_ABS, idev->input->evbit);
+	input_set_abs_params(idev->input, ABS_X, -2048, 2047, 32, 32);
+	input_set_abs_params(idev->input, ABS_Y, -2048, 2047, 32, 32);
+	input_set_abs_params(idev->input, ABS_Z, -2048, 2047, 32, 32);
+
+	err = input_register_polled_device(idev);
+	if (err) {
+		dev_err(&c->dev, "failed to register polled input device\n");
+		goto err_free_mem;
+	}
+
+	return 0;
+
+err_free_mem:
+	input_free_polled_device(idev);
+	kfree(m);
+	return err;
+}
+
+static int __devexit mma8450_remove(struct i2c_client *c)
+{
+	struct mma8450 *m = i2c_get_clientdata(c);
+	struct input_polled_dev *idev = m->idev;
+
+	input_unregister_polled_device(idev);
+	input_free_polled_device(idev);
+	kfree(m);
+
+	return 0;
+}
+
+static const struct i2c_device_id mma8450_id[] = {
+	{ MMA8450_DRV_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mma8450_id);
+
+static struct i2c_driver mma8450_driver = {
+	.driver = {
+		.name	= MMA8450_DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mma8450_probe,
+	.remove		= __devexit_p(mma8450_remove),
+	.id_table	= mma8450_id,
+};
+
+static int __init mma8450_init(void)
+{
+	return i2c_add_driver(&mma8450_driver);
+}
+module_init(mma8450_init);
+
+static void __exit mma8450_exit(void)
+{
+	i2c_del_driver(&mma8450_driver);
+}
+module_exit(mma8450_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
new file mode 100644
index 0000000..b95fac1
--- /dev/null
+++ b/drivers/input/misc/mpu3050.c
@@ -0,0 +1,376 @@
+/*
+ * MPU3050 Tri-axis gyroscope driver
+ *
+ * Copyright (C) 2011 Wistron Co.Ltd
+ * Joseph Lai <joseph_lai@wistron.com>
+ *
+ * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version
+ *
+ * This is a 'lite' version of the driver, while we consider the right way
+ * to present the other features to user space. In particular it requires the
+ * device has an IRQ, and it only provides an input interface, so is not much
+ * use for device orientation. A fuller version is available from the Meego
+ * tree.
+ *
+ * This program is based on bma023.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#define MPU3050_CHIP_ID_REG	0x00
+#define MPU3050_CHIP_ID		0x69
+#define MPU3050_XOUT_H		0x1D
+#define MPU3050_PWR_MGM		0x3E
+#define MPU3050_PWR_MGM_POS	6
+#define MPU3050_PWR_MGM_MASK	0x40
+
+#define MPU3050_AUTO_DELAY	1000
+
+#define MPU3050_MIN_VALUE	-32768
+#define MPU3050_MAX_VALUE	32767
+
+struct axis_data {
+	s16 x;
+	s16 y;
+	s16 z;
+};
+
+struct mpu3050_sensor {
+	struct i2c_client *client;
+	struct device *dev;
+	struct input_dev *idev;
+};
+
+/**
+ *	mpu3050_xyz_read_reg	-	read the axes values
+ *	@buffer: provide register addr and get register
+ *	@length: length of register
+ *
+ *	Reads the register values in one transaction or returns a negative
+ *	error code on failure.
+ */
+static int mpu3050_xyz_read_reg(struct i2c_client *client,
+			       u8 *buffer, int length)
+{
+	/*
+	 * Annoying we can't make this const because the i2c layer doesn't
+	 * declare input buffers const.
+	 */
+	char cmd = MPU3050_XOUT_H;
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &cmd,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = buffer,
+		},
+	};
+
+	return i2c_transfer(client->adapter, msg, 2);
+}
+
+/**
+ *	mpu3050_read_xyz	-	get co-ordinates from device
+ *	@client: i2c address of sensor
+ *	@coords: co-ordinates to update
+ *
+ *	Return the converted X Y and Z co-ordinates from the sensor device
+ */
+static void mpu3050_read_xyz(struct i2c_client *client,
+			     struct axis_data *coords)
+{
+	u16 buffer[3];
+
+	mpu3050_xyz_read_reg(client, (u8 *)buffer, 6);
+	coords->x = be16_to_cpu(buffer[0]);
+	coords->y = be16_to_cpu(buffer[1]);
+	coords->z = be16_to_cpu(buffer[2]);
+	dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__,
+					coords->x, coords->y, coords->z);
+}
+
+/**
+ *	mpu3050_set_power_mode	-	set the power mode
+ *	@client: i2c client for the sensor
+ *	@val: value to switch on/off of power, 1: normal power, 0: low power
+ *
+ *	Put device to normal-power mode or low-power mode.
+ */
+static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)
+{
+	u8 value;
+
+	value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
+	value = (value & ~MPU3050_PWR_MGM_MASK) |
+		(((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^
+		 MPU3050_PWR_MGM_MASK);
+	i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value);
+}
+
+/**
+ *	mpu3050_input_open	-	called on input event open
+ *	@input: input dev of opened device
+ *
+ *	The input layer calls this function when input event is opened. The
+ *	function will push the device to resume. Then, the device is ready
+ *	to provide data.
+ */
+static int mpu3050_input_open(struct input_dev *input)
+{
+	struct mpu3050_sensor *sensor = input_get_drvdata(input);
+
+	pm_runtime_get(sensor->dev);
+
+	return 0;
+}
+
+/**
+ *	mpu3050_input_close	-	called on input event close
+ *	@input: input dev of closed device
+ *
+ *	The input layer calls this function when input event is closed. The
+ *	function will push the device to suspend.
+ */
+static void mpu3050_input_close(struct input_dev *input)
+{
+	struct mpu3050_sensor *sensor = input_get_drvdata(input);
+
+	pm_runtime_put(sensor->dev);
+}
+
+/**
+ *	mpu3050_interrupt_thread	-	handle an IRQ
+ *	@irq: interrupt numner
+ *	@data: the sensor
+ *
+ *	Called by the kernel single threaded after an interrupt occurs. Read
+ *	the sensor data and generate an input event for it.
+ */
+static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)
+{
+	struct mpu3050_sensor *sensor = data;
+	struct axis_data axis;
+
+	mpu3050_read_xyz(sensor->client, &axis);
+
+	input_report_abs(sensor->idev, ABS_X, axis.x);
+	input_report_abs(sensor->idev, ABS_Y, axis.y);
+	input_report_abs(sensor->idev, ABS_Z, axis.z);
+	input_sync(sensor->idev);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	mpu3050_probe	-	device detection callback
+ *	@client: i2c client of found device
+ *	@id: id match information
+ *
+ *	The I2C layer calls us when it believes a sensor is present at this
+ *	address. Probe to see if this is correct and to validate the device.
+ *
+ *	If present install the relevant sysfs interfaces and input device.
+ */
+static int __devinit mpu3050_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct mpu3050_sensor *sensor;
+	struct input_dev *idev;
+	int ret;
+	int error;
+
+	sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL);
+	idev = input_allocate_device();
+	if (!sensor || !idev) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	sensor->client = client;
+	sensor->dev = &client->dev;
+	sensor->idev = idev;
+
+	mpu3050_set_power_mode(client, 1);
+	msleep(10);
+
+	ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to detect device\n");
+		error = -ENXIO;
+		goto err_free_mem;
+	}
+
+	if (ret != MPU3050_CHIP_ID) {
+		dev_err(&client->dev, "unsupported chip id\n");
+		error = -ENXIO;
+		goto err_free_mem;
+	}
+
+	idev->name = "MPU3050";
+	idev->id.bustype = BUS_I2C;
+	idev->dev.parent = &client->dev;
+
+	idev->open = mpu3050_input_open;
+	idev->close = mpu3050_input_close;
+
+	__set_bit(EV_ABS, idev->evbit);
+	input_set_abs_params(idev, ABS_X,
+			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+	input_set_abs_params(idev, ABS_Y,
+			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+	input_set_abs_params(idev, ABS_Z,
+			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+
+	input_set_drvdata(idev, sensor);
+
+	pm_runtime_set_active(&client->dev);
+
+	error = request_threaded_irq(client->irq,
+				     NULL, mpu3050_interrupt_thread,
+				     IRQF_TRIGGER_RISING,
+				     "mpu_int", sensor);
+	if (error) {
+		dev_err(&client->dev,
+			"can't get IRQ %d, error %d\n", client->irq, error);
+		goto err_pm_set_suspended;
+	}
+
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(&client->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, sensor);
+err_pm_set_suspended:
+	pm_runtime_set_suspended(&client->dev);
+err_free_mem:
+	input_unregister_device(idev);
+	kfree(sensor);
+	return error;
+}
+
+/**
+ *	mpu3050_remove	-	remove a sensor
+ *	@client: i2c client of sensor being removed
+ *
+ *	Our sensor is going away, clean up the resources.
+ */
+static int __devexit mpu3050_remove(struct i2c_client *client)
+{
+	struct mpu3050_sensor *sensor = i2c_get_clientdata(client);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	free_irq(client->irq, sensor);
+	input_unregister_device(sensor->idev);
+	kfree(sensor);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ *	mpu3050_suspend		-	called on device suspend
+ *	@dev: device being suspended
+ *
+ *	Put the device into sleep mode before we suspend the machine.
+ */
+static int mpu3050_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	mpu3050_set_power_mode(client, 0);
+
+	return 0;
+}
+
+/**
+ *	mpu3050_resume		-	called on device resume
+ *	@dev: device being resumed
+ *
+ *	Put the device into powered mode on resume.
+ */
+static int mpu3050_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	mpu3050_set_power_mode(client, 1);
+	msleep(100);  /* wait for gyro chip resume */
+
+	return 0;
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL);
+
+static const struct i2c_device_id mpu3050_ids[] = {
+	{ "mpu3050", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mpu3050_ids);
+
+static struct i2c_driver mpu3050_i2c_driver = {
+	.driver	= {
+		.name	= "mpu3050",
+		.owner	= THIS_MODULE,
+		.pm	= &mpu3050_pm,
+	},
+	.probe		= mpu3050_probe,
+	.remove		= __devexit_p(mpu3050_remove),
+	.id_table	= mpu3050_ids,
+};
+
+static int __init mpu3050_init(void)
+{
+	return i2c_add_driver(&mpu3050_i2c_driver);
+}
+module_init(mpu3050_init);
+
+static void __exit mpu3050_exit(void)
+{
+	i2c_del_driver(&mpu3050_i2c_driver);
+}
+module_exit(mpu3050_exit);
+
+MODULE_AUTHOR("Wistron Corp.");
+MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 62bae99..ad2e51c 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -373,7 +373,7 @@ static struct xenbus_driver xenkbd_driver = {
 
 static int __init xenkbd_init(void)
 {
-	if (!xen_pv_domain())
+	if (!xen_domain())
 		return -ENODEV;
 
 	/* Nothing to do if running in dom0. */
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 7b6ce17..58902fb 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -191,7 +191,7 @@ static void __exit gpio_mouse_exit(void)
 }
 module_exit(gpio_mouse_exit);
 
-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
 MODULE_DESCRIPTION("GPIO mouse driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index c31ad11..83bcaba 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -33,7 +33,7 @@ static const char *desired_serio_phys;
 static int lifebook_limit_serio3(const struct dmi_system_id *d)
 {
 	desired_serio_phys = "isa0060/serio3";
-	return 0;
+	return 1;
 }
 
 static bool lifebook_use_6byte_proto;
@@ -41,7 +41,7 @@ static bool lifebook_use_6byte_proto;
 static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
 {
 	lifebook_use_6byte_proto = true;
-	return 0;
+	return 1;
 }
 
 static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index 943cfec..6c5d84f 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -12,7 +12,6 @@
 
 #include <linux/init.h>
 #include <linux/input.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 1242775..2fc887a 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -20,7 +20,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/input.h>
 #include <linux/ctype.h>
 #include <linux/libps2.h>
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e06e045..5538fc6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -207,27 +207,37 @@ static int synaptics_identify(struct psmouse *psmouse)
 static int synaptics_resolution(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv = psmouse->private;
-	unsigned char res[3];
-	unsigned char max[3];
+	unsigned char resp[3];
 
 	if (SYN_ID_MAJOR(priv->identity) < 4)
 		return 0;
 
-	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
-		if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
-			priv->x_res = res[0]; /* x resolution in units/mm */
-			priv->y_res = res[2]; /* y resolution in units/mm */
+	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) {
+		if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) {
+			priv->x_res = resp[0]; /* x resolution in units/mm */
+			priv->y_res = resp[2]; /* y resolution in units/mm */
 		}
 	}
 
 	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
 	    SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
-		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
-			printk(KERN_ERR "Synaptics claims to have dimensions query,"
-			       " but I'm not able to read it.\n");
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {
+			printk(KERN_ERR "Synaptics claims to have max coordinates"
+			       " query, but I'm not able to read it.\n");
+		} else {
+			priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+			priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
+		}
+	}
+
+	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
+	    SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
+			printk(KERN_ERR "Synaptics claims to have min coordinates"
+			       " query, but I'm not able to read it.\n");
 		} else {
-			priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
-			priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3);
+			priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+			priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
 		}
 	}
 
@@ -406,26 +416,10 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 	memset(hw, 0, sizeof(struct synaptics_hw_state));
 
 	if (SYN_MODEL_NEWABS(priv->model_id)) {
-		hw->x = (((buf[3] & 0x10) << 8) |
-			 ((buf[1] & 0x0f) << 8) |
-			 buf[4]);
-		hw->y = (((buf[3] & 0x20) << 7) |
-			 ((buf[1] & 0xf0) << 4) |
-			 buf[5]);
-
-		hw->z = buf[2];
 		hw->w = (((buf[0] & 0x30) >> 2) |
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
-		if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
-			/* Gesture packet: (x, y, z) at half resolution */
-			priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
-			priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
-			priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
-			return 1;
-		}
-
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
@@ -448,6 +442,22 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
 		}
 
+		if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
+			/* Gesture packet: (x, y, z) at half resolution */
+			priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+			priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+			priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+			return 1;
+		}
+
+		hw->x = (((buf[3] & 0x10) << 8) |
+			 ((buf[1] & 0x0f) << 8) |
+			 buf[4]);
+		hw->y = (((buf[3] & 0x20) << 7) |
+			 ((buf[1] & 0xf0) << 4) |
+			 buf[5]);
+		hw->z = buf[2];
+
 		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
 		    ((buf[0] ^ buf[3]) & 0x02)) {
 			switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
@@ -485,7 +495,8 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 	return 0;
 }
 
-static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y)
+static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot,
+					  bool active, int x, int y)
 {
 	input_mt_slot(dev, slot);
 	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
@@ -502,14 +513,16 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev,
 					  int num_fingers)
 {
 	if (num_fingers >= 2) {
-		set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y));
-		set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y));
+		synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x),
+					      min(a->y, b->y));
+		synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x),
+					      max(a->y, b->y));
 	} else if (num_fingers == 1) {
-		set_slot(dev, 0, true, a->x, a->y);
-		set_slot(dev, 1, false, 0, 0);
+		synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y);
+		synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
 	} else {
-		set_slot(dev, 0, false, 0, 0);
-		set_slot(dev, 1, false, 0, 0);
+		synaptics_report_semi_mt_slot(dev, 0, false, 0, 0);
+		synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
 	}
 }
 
@@ -684,23 +697,36 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
 static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 {
 	int i;
+	int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
+			SYN_REDUCED_FILTER_FUZZ : 0;
 
 	__set_bit(INPUT_PROP_POINTER, dev->propbit);
 
 	__set_bit(EV_ABS, dev->evbit);
 	input_set_abs_params(dev, ABS_X,
-			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
+			     priv->x_min ?: XMIN_NOMINAL,
+			     priv->x_max ?: XMAX_NOMINAL,
+			     fuzz, 0);
 	input_set_abs_params(dev, ABS_Y,
-			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
+			     priv->y_min ?: YMIN_NOMINAL,
+			     priv->y_max ?: YMAX_NOMINAL,
+			     fuzz, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
 	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
 		input_mt_init_slots(dev, 2);
-		input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
-				     priv->x_max ?: XMAX_NOMINAL, 0, 0);
-		input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
-				     priv->y_max ?: YMAX_NOMINAL, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_X,
+				     priv->x_min ?: XMIN_NOMINAL,
+				     priv->x_max ?: XMAX_NOMINAL,
+				     fuzz, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y,
+				     priv->y_min ?: YMIN_NOMINAL,
+				     priv->y_max ?: YMAX_NOMINAL,
+				     fuzz, 0);
+
+		input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res);
+		input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res);
 	}
 
 	if (SYN_CAP_PALMDETECT(priv->capabilities))
@@ -971,4 +997,3 @@ bool synaptics_supported(void)
 }
 
 #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
-
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 7453938..ca040aa 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -19,7 +19,8 @@
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
 #define SYN_QUE_EXT_CAPAB_0C		0x0c
-#define SYN_QUE_EXT_DIMENSIONS		0x0d
+#define SYN_QUE_EXT_MAX_COORDS		0x0d
+#define SYN_QUE_EXT_MIN_COORDS		0x0f
 
 /* synatics modes */
 #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)
@@ -66,18 +67,21 @@
  * 1	0x60	multifinger mode	identifies firmware finger counting
  *					(not reporting!) algorithm.
  *					Not particularly meaningful
- * 1	0x80    covered pad		W clipped to 14, 15 == pad mostly covered
- * 2	0x01    clickpad bit 1		2-button ClickPad
- * 2	0x02    deluxe LED controls	touchpad support LED commands
+ * 1	0x80	covered pad		W clipped to 14, 15 == pad mostly covered
+ * 2	0x01	clickpad bit 1		2-button ClickPad
+ * 2	0x02	deluxe LED controls	touchpad support LED commands
  *					ala multimedia control bar
  * 2	0x04	reduced filtering	firmware does less filtering on
  *					position data, driver should watch
  *					for noise.
+ * 2	0x20	report min		query 0x0f gives min coord reported
  */
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
+#define SYN_CAP_MIN_DIMENSIONS(ex0c)	((ex0c) & 0x002000)
 #define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
+#define SYN_CAP_REDUCED_FILTERING(ex0c)	((ex0c) & 0x000400)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -104,6 +108,9 @@
 #define SYN_NEWABS_RELAXED		2
 #define SYN_OLDABS			3
 
+/* amount to fuzz position data when touchpad reports reduced filtering */
+#define SYN_REDUCED_FILTER_FUZZ		8
+
 /*
  * A structure to describe the state of the touchpad hardware (buttons and pad)
  */
@@ -130,7 +137,8 @@ struct synaptics_data {
 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
 	unsigned long int identity;		/* Identification */
 	unsigned int x_res, y_res;		/* X/Y resolution in units/mm */
-	unsigned int x_max, y_max;		/* Max dimensions (from FW) */
+	unsigned int x_max, y_max;		/* Max coordinates (from FW) */
+	unsigned int x_min, y_min;		/* Min coordinates (from FW) */
 
 	unsigned char pkt_type;			/* packet type - old, new, etc */
 	unsigned char mode;			/* current mode byte */
diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c
index 6ee8f0d..95280f9 100644
--- a/drivers/input/serio/at32psif.c
+++ b/drivers/input/serio/at32psif.c
@@ -372,6 +372,6 @@ static void __exit psif_exit(void)
 module_init(psif_init);
 module_exit(psif_exit);
 
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
 MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 4220620..979c443 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -795,7 +795,7 @@ int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback)
 
 /************************* Keepalive timer task *********************/
 
-void hp_sdc_kicker (unsigned long data)
+static void hp_sdc_kicker(unsigned long data)
 {
 	tasklet_schedule(&hp_sdc.task);
 	/* Re-insert the periodic task. */
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 0a619c5..6d89fd1 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -225,7 +225,6 @@
 	/* toolMode codes
 	 */
 #define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
-#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
 #define AIPTEK_TOOL_BUTTON_PENCIL_MODE			BTN_TOOL_PENCIL
 #define AIPTEK_TOOL_BUTTON_BRUSH_MODE			BTN_TOOL_BRUSH
 #define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE		BTN_TOOL_AIRBRUSH
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 08ba5ad..03ebcc8 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -15,6 +15,7 @@
 #include "wacom_wac.h"
 #include "wacom.h"
 #include <linux/input/mt.h>
+#include <linux/hid.h>
 
 /* resolution for penabled devices */
 #define WACOM_PL_RES		20
@@ -264,6 +265,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 			wacom->id[0] = 0;
 		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
 		input_report_key(input, wacom->tool[0], prox);
+		input_event(input, EV_MSC, MSC_SERIAL, 1);
 		input_sync(input); /* sync last event */
 	}
 
@@ -273,11 +275,10 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 		prox = data[7] & 0xf8;
 		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
-			input_report_key(input, BTN_0, (data[7] & 0x40));
-			input_report_key(input, BTN_4, (data[7] & 0x80));
+			input_report_key(input, BTN_BACK, (data[7] & 0x40));
+			input_report_key(input, BTN_FORWARD, (data[7] & 0x80));
 			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
 			input_report_rel(input, REL_WHEEL, rw);
-			input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 			if (!prox)
 				wacom->id[1] = 0;
 			input_report_abs(input, ABS_MISC, wacom->id[1]);
@@ -290,18 +291,17 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 		prox = (data[7] & 0xf8) || data[8];
 		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
-			input_report_key(input, BTN_0, (data[7] & 0x08));
-			input_report_key(input, BTN_1, (data[7] & 0x20));
-			input_report_key(input, BTN_4, (data[7] & 0x10));
-			input_report_key(input, BTN_5, (data[7] & 0x40));
+			input_report_key(input, BTN_BACK, (data[7] & 0x08));
+			input_report_key(input, BTN_LEFT, (data[7] & 0x20));
+			input_report_key(input, BTN_FORWARD, (data[7] & 0x10));
+			input_report_key(input, BTN_RIGHT, (data[7] & 0x40));
 			input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
-			input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 			if (!prox)
 				wacom->id[1] = 0;
 			input_report_abs(input, ABS_MISC, wacom->id[1]);
 			input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+			retval = 1;
 		}
-		retval = 1;
 		break;
 	}
 exit:
@@ -494,10 +494,6 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 
 	/* pad packets. Works as a second tool and is always in prox */
 	if (data[0] == WACOM_REPORT_INTUOSPAD) {
-		/* initiate the pad as a device */
-		if (wacom->tool[1] != BTN_TOOL_FINGER)
-			wacom->tool[1] = BTN_TOOL_FINGER;
-
 		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
 			input_report_key(input, BTN_0, (data[2] & 0x01));
 			input_report_key(input, BTN_1, (data[3] & 0x01));
@@ -1080,18 +1076,14 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	switch (wacom_wac->features.type) {
 	case WACOM_MO:
-		__set_bit(BTN_1, input_dev->keybit);
-		__set_bit(BTN_5, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		/* fall through */
 
 	case WACOM_G4:
 		input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
 
-		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-		__set_bit(BTN_0, input_dev->keybit);
-		__set_bit(BTN_4, input_dev->keybit);
+		__set_bit(BTN_BACK, input_dev->keybit);
+		__set_bit(BTN_FORWARD, input_dev->keybit);
 		/* fall through */
 
 	case GRAPHIRE:
@@ -1127,10 +1119,12 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case CINTIQ:
 		for (i = 0; i < 8; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
-		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 
-		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
-		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+		if (wacom_wac->features.type != WACOM_21UX2) {
+			input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+			input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+		}
+
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		wacom_setup_cintiq(wacom_wac);
 		break;
@@ -1151,8 +1145,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(BTN_2, input_dev->keybit);
 		__set_bit(BTN_3, input_dev->keybit);
 
-		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		/* fall through */
@@ -1170,7 +1162,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case INTUOS4S:
 		for (i = 0; i < 7; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
-		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		wacom_setup_intuos(wacom_wac);
@@ -1295,6 +1286,12 @@ static const struct wacom_features wacom_features_0x65 =
 static const struct wacom_features wacom_features_0x69 =
 	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
 	  63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
+static const struct wacom_features wacom_features_0x6A =
+	{ "Wacom Bamboo1 4x6",    WACOM_PKGLEN_GRAPHIRE,  14760,  9225, 1023,
+	  63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x6B =
+	{ "Wacom Bamboo1 5x8",    WACOM_PKGLEN_GRAPHIRE,  21648, 13530, 1023,
+	  63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x20 =
 	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1427,6 +1424,9 @@ static const struct wacom_features wacom_features_0x90 =
 static const struct wacom_features wacom_features_0x93 =
 	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x97 =
+	{ "Wacom ISDv4 97",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  511,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x9A =
 	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1458,7 +1458,7 @@ static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023,
 	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD4 =
-	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255,
+	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD6 =
 	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
@@ -1483,6 +1483,11 @@ static const struct wacom_features wacom_features_0x6004 =
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
 	.driver_info = (kernel_ulong_t)&wacom_features_##prod
 
+#define USB_DEVICE_DETAILED(prod, class, sub, proto)			\
+	USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_WACOM, prod, class,	\
+				      sub, proto),			\
+	.driver_info = (kernel_ulong_t)&wacom_features_##prod
+
 #define USB_DEVICE_LENOVO(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_LENOVO, prod),			\
 	.driver_info = (kernel_ulong_t)&wacom_features_##prod
@@ -1506,6 +1511,8 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x64) },
 	{ USB_DEVICE_WACOM(0x65) },
 	{ USB_DEVICE_WACOM(0x69) },
+	{ USB_DEVICE_WACOM(0x6A) },
+	{ USB_DEVICE_WACOM(0x6B) },
 	{ USB_DEVICE_WACOM(0x20) },
 	{ USB_DEVICE_WACOM(0x21) },
 	{ USB_DEVICE_WACOM(0x22) },
@@ -1545,7 +1552,13 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
 	{ USB_DEVICE_WACOM(0xC7) },
-	{ USB_DEVICE_WACOM(0xCE) },
+	/*
+	 * DTU-2231 has two interfaces on the same configuration,
+	 * only one is used.
+	 */
+	{ USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID,
+			      USB_INTERFACE_SUBCLASS_BOOT,
+			      USB_INTERFACE_PROTOCOL_MOUSE) },
 	{ USB_DEVICE_WACOM(0xD0) },
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },
@@ -1560,6 +1573,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
 	{ USB_DEVICE_WACOM(0x93) },
+	{ USB_DEVICE_WACOM(0x97) },
 	{ USB_DEVICE_WACOM(0x9A) },
 	{ USB_DEVICE_WACOM(0x9F) },
 	{ USB_DEVICE_WACOM(0xE2) },
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 5196861..d507b9b 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -967,17 +967,12 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
 		ts->get_pendown_state = pdata->get_pendown_state;
 	} else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-		err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+		err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
+				       "ads7846_pendown");
 		if (err) {
-			dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-				pdata->gpio_pendown);
-			return err;
-		}
-		err = gpio_direction_input(pdata->gpio_pendown);
-		if (err) {
-			dev_err(&spi->dev, "failed to setup pendown GPIO%d\n",
-				pdata->gpio_pendown);
-			gpio_free(pdata->gpio_pendown);
+			dev_err(&spi->dev,
+				"failed to request/setup pendown GPIO%d: %d\n",
+				pdata->gpio_pendown, err);
 			return err;
 		}
 
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index fa8e56b..8034cbb 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -164,7 +164,7 @@ static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id)
 
 		data = ac97c_readl(atmel_wm97xx, CBRHR);
 		value = data & 0x0fff;
-		source = data & WM97XX_ADCSRC_MASK;
+		source = data & WM97XX_ADCSEL_MASK;
 		pen_down = (data & WM97XX_PEN_DOWN) >> 8;
 
 		if (source == WM97XX_ADCSEL_X)
@@ -442,6 +442,6 @@ static void __exit atmel_wm97xx_exit(void)
 }
 module_exit(atmel_wm97xx_exit);
 
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
 MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1e61387..ae00604 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -48,41 +48,47 @@
 #define MXT_OBJECT_SIZE		6
 
 /* Object types */
-#define MXT_DEBUG_DIAGNOSTIC	37
-#define MXT_GEN_MESSAGE		5
-#define MXT_GEN_COMMAND		6
-#define MXT_GEN_POWER		7
-#define MXT_GEN_ACQUIRE		8
-#define MXT_TOUCH_MULTI		9
-#define MXT_TOUCH_KEYARRAY	15
-#define MXT_TOUCH_PROXIMITY	23
-#define MXT_PROCI_GRIPFACE	20
-#define MXT_PROCG_NOISE		22
-#define MXT_PROCI_ONETOUCH	24
-#define MXT_PROCI_TWOTOUCH	27
-#define MXT_PROCI_GRIP		40
-#define MXT_PROCI_PALM		41
-#define MXT_SPT_COMMSCONFIG	18
-#define MXT_SPT_GPIOPWM		19
-#define MXT_SPT_SELFTEST	25
-#define MXT_SPT_CTECONFIG	28
-#define MXT_SPT_USERDATA	38
-#define MXT_SPT_DIGITIZER	43
-#define MXT_SPT_MESSAGECOUNT	44
-
-/* MXT_GEN_COMMAND field */
+#define MXT_DEBUG_DIAGNOSTIC_T37	37
+#define MXT_GEN_MESSAGE_T5		5
+#define MXT_GEN_COMMAND_T6		6
+#define MXT_GEN_POWER_T7		7
+#define MXT_GEN_ACQUIRE_T8		8
+#define MXT_GEN_DATASOURCE_T53		53
+#define MXT_TOUCH_MULTI_T9		9
+#define MXT_TOUCH_KEYARRAY_T15		15
+#define MXT_TOUCH_PROXIMITY_T23		23
+#define MXT_TOUCH_PROXKEY_T52		52
+#define MXT_PROCI_GRIPFACE_T20		20
+#define MXT_PROCG_NOISE_T22		22
+#define MXT_PROCI_ONETOUCH_T24		24
+#define MXT_PROCI_TWOTOUCH_T27		27
+#define MXT_PROCI_GRIP_T40		40
+#define MXT_PROCI_PALM_T41		41
+#define MXT_PROCI_TOUCHSUPPRESSION_T42	42
+#define MXT_PROCI_STYLUS_T47		47
+#define MXT_PROCG_NOISESUPPRESSION_T48	48
+#define MXT_SPT_COMMSCONFIG_T18		18
+#define MXT_SPT_GPIOPWM_T19		19
+#define MXT_SPT_SELFTEST_T25		25
+#define MXT_SPT_CTECONFIG_T28		28
+#define MXT_SPT_USERDATA_T38		38
+#define MXT_SPT_DIGITIZER_T43		43
+#define MXT_SPT_MESSAGECOUNT_T44	44
+#define MXT_SPT_CTECONFIG_T46		46
+
+/* MXT_GEN_COMMAND_T6 field */
 #define MXT_COMMAND_RESET	0
 #define MXT_COMMAND_BACKUPNV	1
 #define MXT_COMMAND_CALIBRATE	2
 #define MXT_COMMAND_REPORTALL	3
 #define MXT_COMMAND_DIAGNOSTIC	5
 
-/* MXT_GEN_POWER field */
+/* MXT_GEN_POWER_T7 field */
 #define MXT_POWER_IDLEACQINT	0
 #define MXT_POWER_ACTVACQINT	1
 #define MXT_POWER_ACTV2IDLETO	2
 
-/* MXT_GEN_ACQUIRE field */
+/* MXT_GEN_ACQUIRE_T8 field */
 #define MXT_ACQUIRE_CHRGTIME	0
 #define MXT_ACQUIRE_TCHDRIFT	2
 #define MXT_ACQUIRE_DRIFTST	3
@@ -91,7 +97,7 @@
 #define MXT_ACQUIRE_ATCHCALST	6
 #define MXT_ACQUIRE_ATCHCALSTHR	7
 
-/* MXT_TOUCH_MULTI field */
+/* MXT_TOUCH_MULTI_T9 field */
 #define MXT_TOUCH_CTRL		0
 #define MXT_TOUCH_XORIGIN	1
 #define MXT_TOUCH_YORIGIN	2
@@ -121,7 +127,7 @@
 #define MXT_TOUCH_YEDGEDIST	29
 #define MXT_TOUCH_JUMPLIMIT	30
 
-/* MXT_PROCI_GRIPFACE field */
+/* MXT_PROCI_GRIPFACE_T20 field */
 #define MXT_GRIPFACE_CTRL	0
 #define MXT_GRIPFACE_XLOGRIP	1
 #define MXT_GRIPFACE_XHIGRIP	2
@@ -151,11 +157,11 @@
 #define MXT_NOISE_FREQ4		15
 #define MXT_NOISE_IDLEGCAFVALID	16
 
-/* MXT_SPT_COMMSCONFIG */
+/* MXT_SPT_COMMSCONFIG_T18 */
 #define MXT_COMMS_CTRL		0
 #define MXT_COMMS_CMD		1
 
-/* MXT_SPT_CTECONFIG field */
+/* MXT_SPT_CTECONFIG_T28 field */
 #define MXT_CTE_CTRL		0
 #define MXT_CTE_CMD		1
 #define MXT_CTE_MODE		2
@@ -166,7 +172,7 @@
 #define MXT_VOLTAGE_DEFAULT	2700000
 #define MXT_VOLTAGE_STEP	10000
 
-/* Define for MXT_GEN_COMMAND */
+/* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
 #define MXT_BACKUP_VALUE	0x55
 #define MXT_BACKUP_TIME		25	/* msec */
@@ -256,24 +262,31 @@ struct mxt_data {
 static bool mxt_object_readable(unsigned int type)
 {
 	switch (type) {
-	case MXT_GEN_MESSAGE:
-	case MXT_GEN_COMMAND:
-	case MXT_GEN_POWER:
-	case MXT_GEN_ACQUIRE:
-	case MXT_TOUCH_MULTI:
-	case MXT_TOUCH_KEYARRAY:
-	case MXT_TOUCH_PROXIMITY:
-	case MXT_PROCI_GRIPFACE:
-	case MXT_PROCG_NOISE:
-	case MXT_PROCI_ONETOUCH:
-	case MXT_PROCI_TWOTOUCH:
-	case MXT_PROCI_GRIP:
-	case MXT_PROCI_PALM:
-	case MXT_SPT_COMMSCONFIG:
-	case MXT_SPT_GPIOPWM:
-	case MXT_SPT_SELFTEST:
-	case MXT_SPT_CTECONFIG:
-	case MXT_SPT_USERDATA:
+	case MXT_GEN_MESSAGE_T5:
+	case MXT_GEN_COMMAND_T6:
+	case MXT_GEN_POWER_T7:
+	case MXT_GEN_ACQUIRE_T8:
+	case MXT_GEN_DATASOURCE_T53:
+	case MXT_TOUCH_MULTI_T9:
+	case MXT_TOUCH_KEYARRAY_T15:
+	case MXT_TOUCH_PROXIMITY_T23:
+	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_PROCI_GRIPFACE_T20:
+	case MXT_PROCG_NOISE_T22:
+	case MXT_PROCI_ONETOUCH_T24:
+	case MXT_PROCI_TWOTOUCH_T27:
+	case MXT_PROCI_GRIP_T40:
+	case MXT_PROCI_PALM_T41:
+	case MXT_PROCI_TOUCHSUPPRESSION_T42:
+	case MXT_PROCI_STYLUS_T47:
+	case MXT_PROCG_NOISESUPPRESSION_T48:
+	case MXT_SPT_COMMSCONFIG_T18:
+	case MXT_SPT_GPIOPWM_T19:
+	case MXT_SPT_SELFTEST_T25:
+	case MXT_SPT_CTECONFIG_T28:
+	case MXT_SPT_USERDATA_T38:
+	case MXT_SPT_DIGITIZER_T43:
+	case MXT_SPT_CTECONFIG_T46:
 		return true;
 	default:
 		return false;
@@ -283,21 +296,28 @@ static bool mxt_object_readable(unsigned int type)
 static bool mxt_object_writable(unsigned int type)
 {
 	switch (type) {
-	case MXT_GEN_COMMAND:
-	case MXT_GEN_POWER:
-	case MXT_GEN_ACQUIRE:
-	case MXT_TOUCH_MULTI:
-	case MXT_TOUCH_KEYARRAY:
-	case MXT_TOUCH_PROXIMITY:
-	case MXT_PROCI_GRIPFACE:
-	case MXT_PROCG_NOISE:
-	case MXT_PROCI_ONETOUCH:
-	case MXT_PROCI_TWOTOUCH:
-	case MXT_PROCI_GRIP:
-	case MXT_PROCI_PALM:
-	case MXT_SPT_GPIOPWM:
-	case MXT_SPT_SELFTEST:
-	case MXT_SPT_CTECONFIG:
+	case MXT_GEN_COMMAND_T6:
+	case MXT_GEN_POWER_T7:
+	case MXT_GEN_ACQUIRE_T8:
+	case MXT_TOUCH_MULTI_T9:
+	case MXT_TOUCH_KEYARRAY_T15:
+	case MXT_TOUCH_PROXIMITY_T23:
+	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_PROCI_GRIPFACE_T20:
+	case MXT_PROCG_NOISE_T22:
+	case MXT_PROCI_ONETOUCH_T24:
+	case MXT_PROCI_TWOTOUCH_T27:
+	case MXT_PROCI_GRIP_T40:
+	case MXT_PROCI_PALM_T41:
+	case MXT_PROCI_TOUCHSUPPRESSION_T42:
+	case MXT_PROCI_STYLUS_T47:
+	case MXT_PROCG_NOISESUPPRESSION_T48:
+	case MXT_SPT_COMMSCONFIG_T18:
+	case MXT_SPT_GPIOPWM_T19:
+	case MXT_SPT_SELFTEST_T25:
+	case MXT_SPT_CTECONFIG_T28:
+	case MXT_SPT_DIGITIZER_T43:
+	case MXT_SPT_CTECONFIG_T46:
 		return true;
 	default:
 		return false;
@@ -455,7 +475,7 @@ static int mxt_read_message(struct mxt_data *data,
 	struct mxt_object *object;
 	u16 reg;
 
-	object = mxt_get_object(data, MXT_GEN_MESSAGE);
+	object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
 	if (!object)
 		return -EINVAL;
 
@@ -597,8 +617,8 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 
 		reportid = message.reportid;
 
-		/* whether reportid is thing of MXT_TOUCH_MULTI */
-		object = mxt_get_object(data, MXT_TOUCH_MULTI);
+		/* whether reportid is thing of MXT_TOUCH_MULTI_T9 */
+		object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
 		if (!object)
 			goto end;
 
@@ -635,7 +655,9 @@ static int mxt_check_reg_init(struct mxt_data *data)
 		if (!mxt_object_writable(object->type))
 			continue;
 
-		for (j = 0; j < object->size + 1; j++) {
+		for (j = 0;
+		     j < (object->size + 1) * (object->instances + 1);
+		     j++) {
 			config_offset = index + j;
 			if (config_offset > pdata->config_length) {
 				dev_err(dev, "Not enough config data!\n");
@@ -644,7 +666,7 @@ static int mxt_check_reg_init(struct mxt_data *data)
 			mxt_write_object(data, object->type, j,
 					 pdata->config[config_offset]);
 		}
-		index += object->size + 1;
+		index += (object->size + 1) * (object->instances + 1);
 	}
 
 	return 0;
@@ -678,31 +700,31 @@ static void mxt_handle_pdata(struct mxt_data *data)
 	u8 voltage;
 
 	/* Set touchscreen lines */
-	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_XSIZE,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE,
 			pdata->x_line);
-	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_YSIZE,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE,
 			pdata->y_line);
 
 	/* Set touchscreen orient */
-	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_ORIENT,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT,
 			pdata->orient);
 
 	/* Set touchscreen burst length */
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_BLEN, pdata->blen);
 
 	/* Set touchscreen threshold */
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_TCHTHR, pdata->threshold);
 
 	/* Set touchscreen resolution */
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
-	mxt_write_object(data, MXT_TOUCH_MULTI,
+	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
 			MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
 
 	/* Set touchscreen voltage */
@@ -715,7 +737,7 @@ static void mxt_handle_pdata(struct mxt_data *data)
 			voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
 				MXT_VOLTAGE_STEP;
 
-		mxt_write_object(data, MXT_SPT_CTECONFIG,
+		mxt_write_object(data, MXT_SPT_CTECONFIG_T28,
 				MXT_CTE_VOLTAGE, voltage);
 	}
 }
@@ -819,13 +841,13 @@ static int mxt_initialize(struct mxt_data *data)
 	mxt_handle_pdata(data);
 
 	/* Backup to memory */
-	mxt_write_object(data, MXT_GEN_COMMAND,
+	mxt_write_object(data, MXT_GEN_COMMAND_T6,
 			MXT_COMMAND_BACKUPNV,
 			MXT_BACKUP_VALUE);
 	msleep(MXT_BACKUP_TIME);
 
 	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND,
+	mxt_write_object(data, MXT_GEN_COMMAND_T6,
 			MXT_COMMAND_RESET, 1);
 	msleep(MXT_RESET_TIME);
 
@@ -921,7 +943,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	}
 
 	/* Change to the bootloader mode */
-	mxt_write_object(data, MXT_GEN_COMMAND,
+	mxt_write_object(data, MXT_GEN_COMMAND_T6,
 			MXT_COMMAND_RESET, MXT_BOOT_VALUE);
 	msleep(MXT_RESET_TIME);
 
@@ -1027,14 +1049,14 @@ static void mxt_start(struct mxt_data *data)
 {
 	/* Touch enable */
 	mxt_write_object(data,
-			MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0x83);
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
 	/* Touch disable */
 	mxt_write_object(data,
-			MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0);
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
 }
 
 static int mxt_input_open(struct input_dev *dev)
@@ -1182,7 +1204,7 @@ static int mxt_resume(struct device *dev)
 	struct input_dev *input_dev = data->input_dev;
 
 	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND,
+	mxt_write_object(data, MXT_GEN_COMMAND_T6,
 			MXT_COMMAND_RESET, 1);
 
 	msleep(MXT_RESET_TIME);
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index a93c5c2..d8815c5 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -84,9 +84,9 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
 	memcpy(i2c_data + 1, value, len);
 
 	ret = i2c_master_send(client, i2c_data, len + 1);
-	if (ret != 1) {
+	if (ret != len + 1) {
 		dev_err(&client->dev, "i2c write data cmd failed\n");
-		return ret ? ret : -EIO;
+		return ret < 0 ? ret : -EIO;
 	}
 
 	return 0;
@@ -193,6 +193,8 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client,
 
 	ts->client = client;
 	ts->input = input_dev;
+	ts->reset_pin = pdata->reset_pin;
+	ts->irq_pin = pdata->irq_pin;
 
 	snprintf(ts->phys, sizeof(ts->phys),
 		 "%s/input0", dev_name(&client->dev));
@@ -328,7 +330,7 @@ static int __devexit cy8ctmg110_remove(struct i2c_client *client)
 	return 0;
 }
 
-static struct i2c_device_id cy8ctmg110_idtable[] = {
+static const struct i2c_device_id cy8ctmg110_idtable[] = {
 	{ CY8CTMG110_DRIVER_NAME, 1 },
 	{ }
 };
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index 66c96bf..3276952 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -448,15 +448,11 @@ static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev)
  */
 static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev)
 {
-	int err, i, found;
+	int found = 0;
+	int err, i;
 	u8 r8;
 
-	found = -1;
-
 	for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
-		if (found >= 0)
-			break;
-
 		err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8);
 		if (err)
 			return err;
@@ -466,16 +462,15 @@ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev)
 			break;
 		}
 	}
-	if (found < 0)
-		return 0;
 
 	if (tsdev->vendor == PMIC_VENDOR_FS) {
-		if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+		if (found > MRSTOUCH_MAX_CHANNELS - 18)
 			return -ENOSPC;
 	} else {
-		if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+		if (found > MRSTOUCH_MAX_CHANNELS - 4)
 			return -ENOSPC;
 	}
+
 	return found;
 }
 
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 3242e70..e966c29 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -157,9 +157,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 			x, y, p);
 
 		/* are samples valid */
-		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
-		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
-		    (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+		if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+		    (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+		    (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
 			goto up;
 
 		/* coordinate is good */
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index 22a3411..089b0a0 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -393,5 +393,5 @@ module_exit(tsc_exit);
 
 MODULE_AUTHOR("Cyril Chemparathy");
 MODULE_DESCRIPTION("TNETV107X Touchscreen Driver");
-MODULE_ALIAS("platform: tnetv107x-ts");
+MODULE_ALIAS("platform:tnetv107x-ts");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 98e6117..adc13a5 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -215,8 +215,9 @@ static inline int is_pden(struct wm97xx *wm)
 static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 {
 	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
 
-	if (!wm->pen_probably_down) {
+	if (wants_pen && !wm->pen_probably_down) {
 		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
 		if (!(data & WM97XX_PEN_DOWN))
 			return RC_PENUP;
@@ -224,13 +225,10 @@ static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 	}
 
 	/* set up digitiser */
-	if (adcsel & 0x8000)
-		adcsel = ((adcsel & 0x7fff) + 3) << 12;
-
 	if (wm->mach_ops && wm->mach_ops->pre_sample)
 		wm->mach_ops->pre_sample(adcsel);
-	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-			 adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+				| WM97XX_POLL | WM97XX_DELAY(delay));
 
 	/* wait 3 AC97 time slots + delay for conversion */
 	poll_delay(delay);
@@ -256,13 +254,14 @@ static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 		wm->mach_ops->post_sample(adcsel);
 
 	/* check we have correct sample */
-	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-		*sample & WM97XX_ADCSEL_MASK);
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
 		return RC_PENUP;
 	}
 
-	if (!(*sample & WM97XX_PEN_DOWN)) {
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
 		wm->pen_probably_down = 0;
 		return RC_PENUP;
 	}
@@ -277,14 +276,14 @@ static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
 {
 	int rc;
 
-	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
 	if (rc != RC_VALID)
 		return rc;
-	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
 	if (rc != RC_VALID)
 		return rc;
 	if (pil) {
-		rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p);
+		rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p);
 		if (rc != RC_VALID)
 			return rc;
 	} else
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 2bc2fb8..6e743e3 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -255,8 +255,9 @@ static inline int is_pden(struct wm97xx *wm)
 static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 {
 	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
 
-	if (!wm->pen_probably_down) {
+	if (wants_pen && !wm->pen_probably_down) {
 		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
 		if (!(data & WM97XX_PEN_DOWN))
 			return RC_PENUP;
@@ -264,13 +265,10 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 	}
 
 	/* set up digitiser */
-	if (adcsel & 0x8000)
-		adcsel = ((adcsel & 0x7fff) + 3) << 12;
-
 	if (wm->mach_ops && wm->mach_ops->pre_sample)
 		wm->mach_ops->pre_sample(adcsel);
-	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-			 adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+				| WM97XX_POLL | WM97XX_DELAY(delay));
 
 	/* wait 3 AC97 time slots + delay for conversion */
 	poll_delay(delay);
@@ -296,13 +294,14 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 		wm->mach_ops->post_sample(adcsel);
 
 	/* check we have correct sample */
-	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-		*sample & WM97XX_ADCSEL_MASK);
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
 		return RC_PENUP;
 	}
 
-	if (!(*sample & WM97XX_PEN_DOWN)) {
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
 		wm->pen_probably_down = 0;
 		return RC_PENUP;
 	}
@@ -387,16 +386,18 @@ static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
 		if (rc != RC_VALID)
 			return rc;
 	} else {
-		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN,
+					&data->x);
 		if (rc != RC_VALID)
 			return rc;
 
-		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN,
+					&data->y);
 		if (rc != RC_VALID)
 			return rc;
 
 		if (pil && !five_wire) {
-			rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES,
+			rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
 						&data->p);
 			if (rc != RC_VALID)
 				return rc;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 73ec995..7405353 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -261,8 +261,9 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 {
 	u16 dig1;
 	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
 
-	if (!wm->pen_probably_down) {
+	if (wants_pen && !wm->pen_probably_down) {
 		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
 		if (!(data & WM97XX_PEN_DOWN))
 			return RC_PENUP;
@@ -270,15 +271,14 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 	}
 
 	/* set up digitiser */
-	if (adcsel & 0x8000)
-		adcsel = 1 << ((adcsel & 0x7fff) + 3);
-
 	dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
 	dig1 &= ~WM9713_ADCSEL_MASK;
+	/* WM97XX_ADCSEL_* channels need to be converted to WM9713 format */
+	dig1 |= 1 << ((adcsel & WM97XX_ADCSEL_MASK) >> 12);
 
 	if (wm->mach_ops && wm->mach_ops->pre_sample)
 		wm->mach_ops->pre_sample(adcsel);
-	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL);
 
 	/* wait 3 AC97 time slots + delay for conversion */
 	poll_delay(delay);
@@ -304,13 +304,14 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
 		wm->mach_ops->post_sample(adcsel);
 
 	/* check we have correct sample */
-	if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
-		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
-			*sample & WM97XX_ADCSRC_MASK);
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
 		return RC_PENUP;
 	}
 
-	if (!(*sample & WM97XX_PEN_DOWN)) {
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
 		wm->pen_probably_down = 0;
 		return RC_PENUP;
 	}
@@ -400,14 +401,14 @@ static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
 		if (rc != RC_VALID)
 			return rc;
 	} else {
-		rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x);
+		rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
 		if (rc != RC_VALID)
 			return rc;
-		rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y);
+		rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
 		if (rc != RC_VALID)
 			return rc;
 		if (pil) {
-			rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES,
+			rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
 						&data->p);
 			if (rc != RC_VALID)
 				return rc;
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 5b0f15e..f6328c0 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -122,9 +122,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 			x, y, p);
 
 		/* are samples valid */
-		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
-		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
-		    (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+		if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+		    (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+		    (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
 			goto up;
 
 		/* coordinate is good */
diff --git a/include/linux/input.h b/include/linux/input.h
index 771d6d8..068784e 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -119,9 +119,9 @@ struct input_keymap_entry {
 #define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
 #define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
 
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + ev, len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + abs, struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + abs, struct input_absinfo)	/* set abs value/limits */
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
 
 #define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
 #define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h
new file mode 100644
index 0000000..f6bac89
--- /dev/null
+++ b/include/linux/input/kxtj9.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR		0x0F
+
+struct kxtj9_platform_data {
+	unsigned int min_interval;	/* minimum poll interval (in milli-seconds) */
+
+	/*
+	 * By default, x is axis 0, y is axis 1, z is axis 2; these can be
+	 * changed to account for sensor orientation within the host device.
+	 */
+	u8 axis_map_x;
+	u8 axis_map_y;
+	u8 axis_map_z;
+
+	/*
+	 * Each axis can be negated to account for sensor orientation within
+	 * the host device.
+	 */
+	bool negate_x;
+	bool negate_y;
+	bool negate_z;
+
+	/* CTRL_REG1: set resolution, g-range, data ready enable */
+	/* Output resolution: 8-bit valid or 12-bit valid */
+	#define RES_8BIT		0
+	#define RES_12BIT		(1 << 6)
+	u8 res_12bit;
+	/* Output g-range: +/-2g, 4g, or 8g */
+	#define KXTJ9_G_2G		0
+	#define KXTJ9_G_4G		(1 << 3)
+	#define KXTJ9_G_8G		(1 << 4)
+	u8 g_range;
+
+	/* DATA_CTRL_REG: controls the output data rate of the part */
+	#define ODR12_5F		0
+	#define ODR25F			1
+	#define ODR50F			2
+	#define ODR100F			3
+	#define ODR200F			4
+	#define ODR400F			5
+	#define ODR800F			6
+	u8 data_odr_init;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+};
+#endif  /* __KXTJ9_H__ */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 38e8c4d..fd98bb9 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -38,7 +38,11 @@
 #define WM97XX_ADCSEL_X		0x1000	/* x coord measurement */
 #define WM97XX_ADCSEL_Y		0x2000	/* y coord measurement */
 #define WM97XX_ADCSEL_PRES	0x3000	/* pressure measurement */
-#define WM97XX_ADCSEL_MASK	0x7000
+#define WM97XX_AUX_ID1		0x4000
+#define WM97XX_AUX_ID2		0x5000
+#define WM97XX_AUX_ID3		0x6000
+#define WM97XX_AUX_ID4		0x7000
+#define WM97XX_ADCSEL_MASK	0x7000	/* ADC selection mask */
 #define WM97XX_COO		0x0800	/* enable coordinate mode */
 #define WM97XX_CTC		0x0400	/* enable continuous mode */
 #define WM97XX_CM_RATE_93	0x0000	/* 93.75Hz continuous rate */
@@ -61,13 +65,6 @@
 #define WM97XX_PRP_DET_DIG	0xc000	/* setect on, digitise on */
 #define WM97XX_RPR		0x2000	/* wake up on pen down */
 #define WM97XX_PEN_DOWN		0x8000	/* pen is down */
-#define WM97XX_ADCSRC_MASK	0x7000	/* ADC source mask */
-
-#define WM97XX_AUX_ID1		0x8001
-#define WM97XX_AUX_ID2		0x8002
-#define WM97XX_AUX_ID3		0x8003
-#define WM97XX_AUX_ID4		0x8004
-
 
 /* WM9712 Bits */
 #define WM9712_45W		0x1000	/* set for 5-wire touchscreen */