[media] cpia, stradis: remove deprecated V4L1 drivers

Nobody stepped in to convert these drivers to V4L2, so they are now
removed from the kernel.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

16 files changed, 0 insertions, 8466 deletions

diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia
deleted file mode 100644
index 8a747fe..0000000
--- a/Documentation/video4linux/README.cpia
+++ /dev/null
@@ -1,191 +0,0 @@
-This is a driver for the CPiA PPC2 driven parallel connected
-Camera. For example the Creative WebcamII is CPiA driven.
-
-   ) [1]Peter Pregler, Linz 2000, published under the [2]GNU GPL
-
----------------------------------------------------------------------------
-
-USAGE:
-
-General:
-========
-
-1) Make sure you have created the video devices (/dev/video*):
-
-- if you have a recent MAKEDEV do a 'cd /dev;./MAKEDEV video'
-- otherwise do a:
-
-cd /dev
-mknod video0 c 81 0
-ln -s video0 video
-
-2) Compile the kernel (see below for the list of options to use),
-   configure your parport and reboot.
-
-3) If all worked well you should get messages similar
-   to the following (your versions may be different) on the console:
-
-V4L-Driver for Vision CPiA based cameras v0.7.4
-parport0: read2 timeout.
-parport0: Multimedia device, VLSI Vision Ltd PPC2
-Parallel port driver for Vision CPiA based camera
-  CPIA Version: 1.20 (2.0)
-  CPIA PnP-ID: 0553:0002:0100
-  VP-Version: 1.0 0100
-  1 camera(s) found
-
-
-As modules:
-===========
-
-Make sure you have selected the following kernel options (you can
-select all stuff as modules):
-
-The cpia-stuff is in the section 'Character devices -> Video For Linux'.
-
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-
-For autoloading of all those modules you need to tell module-init-tools
-some stuff. Add the following line to your module-init-tools config-file
-(e.g. /etc/modprobe.conf or wherever your distribution does store that
-stuff):
-
-options parport_pc io=0x378 irq=7 dma=3
-alias char-major-81 cpia_pp
-
-The first line tells the dma/irq channels to use. Those _must_ match
-the settings of your BIOS. Do NOT simply use the values above.  See
-Documentation/parport.txt for more information about this. The second
-line associates the video-device file with the driver. Of cause you
-can also load the modules once upon boot (usually done in /etc/modules).
-
-Linked into the kernel:
-=======================
-
-Make sure you have selected the following kernel options. Note that
-you cannot compile the parport-stuff as modules and the cpia-driver
-statically (the other way round is okay though).
-
-The cpia-stuff is in the section 'Character devices -> Video For Linux'.
-
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_CPIA=y
-CONFIG_VIDEO_CPIA_PP=y
-
-To use DMA/irq you will need to tell the kernel upon boot time the
-hardware configuration of the parport. You can give the boot-parameter
-at the LILO-prompt or specify it in lilo.conf. I use the following
-append-line in lilo.conf:
-
-	append="parport=0x378,7,3"
-
-See Documentation/parport.txt for more information about the
-configuration of the parport and the values given above. Do not simply
-use the values given above.
-
----------------------------------------------------------------------------
-FEATURES:
-
-- mmap/read v4l-interface (but no overlay)
-- image formats: CIF/QCIF, SIF/QSIF, various others used by isabel;
-  note: all sizes except CIF/QCIF are implemented by clipping, i.e.
-  pixels are not uploaded from the camera
-- palettes: VIDEO_PALETTE_GRAY, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB555,
-  VIDEO_PALETTE_RGB24, VIDEO_PALETTE_RGB32, VIDEO_PALETTE_YUYV,
-  VIDEO_PALETTE_UYVY, VIDEO_PALETTE_YUV422
-- state information (color balance, exposure, ...) is preserved between
-  device opens
-- complete control over camera via proc-interface (_all_ camera settings are
-  supported), there is also a python-gtk application available for this [3]
-- works under SMP (but the driver is completely serialized and synchronous)
-  so you get no benefit from SMP, but at least it does not crash your box
-- might work for non-Intel architecture, let us know about this
-
----------------------------------------------------------------------------
-TESTED APPLICATIONS:
-
-- a simple test application based on Xt is available at [3]
-- another test-application based on gqcam-0.4 (uses GTK)
-- gqcam-0.6 should work
-- xawtv-3.x (also the webcam software)
-- xawtv-2.46
-- w3cam (cgi-interface and vidcat, e.g. you may try out 'vidcat  |xv
-  -maxpect -root -quit +noresetroot -rmode 5 -')
-- vic, the MBONE video conferencing tool (version 2.8ucl4-1)
-- isabel 3R4beta (barely working, but AFAICT all the problems are on
-  their side)
-- camserv-0.40
-
-See [3] for pointers to v4l-applications.
-
----------------------------------------------------------------------------
-KNOWN PROBLEMS:
-
-- some applications do not handle the image format correctly, you will
-  see strange horizontal stripes instead of a nice picture -> make sure
-  your application does use a supported image size or queries the driver
-  for the actually used size (reason behind this: the camera cannot
-  provide any image format, so if size NxM is requested the driver will
-  use a format to the closest fitting N1xM1, the application should now
-  query for this granted size, most applications do not).
-- all the todo ;)
-- if there is not enough light and the picture is too dark try to
-  adjust the SetSensorFPS setting, automatic frame rate adjustment
-  has its price
-- do not try out isabel 3R4beta (built 135), you will be disappointed
-
----------------------------------------------------------------------------
-TODO:
-
-- multiple camera support (struct camera or something) - This should work,
-  but hasn't been tested yet.
-- architecture independence?
-- SMP-safe asynchronous mmap interface
-- nibble mode for old parport interfaces
-- streaming capture, this should give a performance gain
-
----------------------------------------------------------------------------
-IMPLEMENTATION NOTES:
-
-The camera can act in two modes, streaming or grabbing. Right now a
-polling grab-scheme is used. Maybe interrupt driven streaming will be
-used for a asynchronous mmap interface in the next major release of the
-driver. This might give a better frame rate.
-
----------------------------------------------------------------------------
-THANKS (in no particular order):
-
-- Scott J. Bertin <sbertin@mindspring.com> for cleanups, the proc-filesystem
-  and much more
-- Henry Bruce <whb@vvl.co.uk> for providing developers information about
-  the CPiA chip, I wish all companies would treat Linux as seriously
-- Karoly Erdei <Karoly.Erdei@risc.uni-linz.ac.at> and RISC-Linz for being
-  my boss ;) resp. my employer and for providing me the hardware and
-  allow me to devote some working time to this project
-- Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help
-  with Isabel (http://isabel.dit.upm.es/)
-- Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code
-- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list
-  and maintaining the web-server[3]
-- Chris Whiteford <Chris@informinteractive.com> for fixes related to the
-  1.02 firmware
-- special kudos to all the tester whose machines crashed and/or
-  will crash. :)
-
----------------------------------------------------------------------------
-REFERENCES
-
-   1. http://www.risc.uni-linz.ac.at/
-      mailto:Peter_Pregler@email.com
-   2. see the file COPYING in the top directory of the kernel tree
-   3. http://webcam.sourceforge.net/
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
index 12217fc..db833ce 100644
--- a/Documentation/video4linux/bttv/Cards
+++ b/Documentation/video4linux/bttv/Cards
@@ -464,10 +464,6 @@ Siemens
 -------
    Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
 
-Stradis
--------
-   SDM275,SDM250,SDM026,SDM025 (SAA7146, IBMMPEG2): MPEG2 decoder only
-
 Powercolor
 ----------
    MTV878
diff --git a/MAINTAINERS b/MAINTAINERS
index 71e40f9..92203a3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5697,12 +5697,6 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/starfire*
 
-STRADIS MPEG-2 DECODER DRIVER
-M:	Nathan Laredo <laredo@gnu.org>
-W:	http://www.stradis.com/
-S:	Maintained
-F:	drivers/media/video/stradis.c
-
 SUN3/3X
 M:	Sam Creasey <sammy@sammy.net>
 W:	http://sammy.net/sun3/
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d9e3b6d..7e7b27b 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -51,10 +51,6 @@ source "drivers/staging/cx25821/Kconfig"
 
 source "drivers/staging/tm6000/Kconfig"
 
-source "drivers/staging/cpia/Kconfig"
-
-source "drivers/staging/stradis/Kconfig"
-
 source "drivers/staging/se401/Kconfig"
 
 source "drivers/staging/usbvideo/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8058a15..72e0c83 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,8 +8,6 @@ obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
-obj-$(CONFIG_VIDEO_CPIA)	+= cpia/
-obj-$(CONFIG_VIDEO_STRADIS)	+= stradis/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 obj-$(CONFIG_USB_SE401)         += se401/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
diff --git a/drivers/staging/cpia/Kconfig b/drivers/staging/cpia/Kconfig
deleted file mode 100644
index 205d247..0000000
--- a/drivers/staging/cpia/Kconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-config VIDEO_CPIA
-	tristate "CPiA Video For Linux (DEPRECATED)"
-	depends on VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca cpia1 module
-	  instead. Note that you need atleast version 0.6.4 of libv4l for
-	  the cpia1 gspca module.
-
-	  This is the video4linux driver for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Labs Video
-	  Blaster Webcam II. If you have one of these cameras, say Y here
-	  and select parallel port and/or USB lowlevel support below,
-	  otherwise say N. This will not work with the Creative Webcam III.
-
-	  Please read <file:Documentation/video4linux/README.cpia> for more
-	  information.
-
-	  This driver is also available as a module (cpia).
-
-config VIDEO_CPIA_PP
-	tristate "CPiA Parallel Port Lowlevel Support"
-	depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
-	help
-	  This is the lowlevel parallel port support for cameras based on
-	  Vision's CPiA (Colour Processor Interface ASIC), such as the
-	  Creative Webcam II. If you have the parallel port version of one
-	  of these cameras, say Y here, otherwise say N. It is also available
-	  as a module (cpia_pp).
-
-config VIDEO_CPIA_USB
-	tristate "CPiA USB Lowlevel Support"
-	depends on VIDEO_CPIA && USB
-	help
-	  This is the lowlevel USB support for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Webcam II.
-	  If you have the USB version of one of these cameras, say Y here,
-	  otherwise say N. This will not work with the Creative Webcam III.
-	  It is also available as a module (cpia_usb).
diff --git a/drivers/staging/cpia/Makefile b/drivers/staging/cpia/Makefile
deleted file mode 100644
index 89e52f1..0000000
--- a/drivers/staging/cpia/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-$(CONFIG_VIDEO_CPIA) += cpia.o
-obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
-obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
-
-EXTRA_CFLAGS += -Idrivers/media/video
diff --git a/drivers/staging/cpia/TODO b/drivers/staging/cpia/TODO
deleted file mode 100644
index ccb1c07..0000000
--- a/drivers/staging/cpia/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This is an obsolete driver for some cpia-based webcams that use the parallel port.
-We couldn't find anyone with this hardware in order to port it to use V4L2.
-
-Also, parallel-port webcams are obsolete nowadays.
-
-If nobody take care on it, the driver will be removed for 2.6.38.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/cpia/cpia.c b/drivers/staging/cpia/cpia.c
deleted file mode 100644
index 0e740b8..0000000
--- a/drivers/staging/cpia/cpia.c
+++ /dev/null
@@ -1,4028 +0,0 @@
-/*
- * cpia CPiA driver
- *
- * Supports CPiA based Video Camera's.
- *
- * (C) Copyright 1999-2000 Peter Pregler
- * (C) Copyright 1999-2000 Scott J. Bertin
- * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com>
- * (C) Copyright 2000 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-#include <linux/sched.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ctype.h>
-#include <linux/pagemap.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <linux/mutex.h>
-
-#include "cpia.h"
-
-static int video_nr = -1;
-
-#ifdef MODULE
-module_param(video_nr, int, 0);
-MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfelt.com>");
-MODULE_DESCRIPTION("V4L-driver for Vision CPiA based cameras");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("video");
-#endif
-
-static unsigned short colorspace_conv;
-module_param(colorspace_conv, ushort, 0444);
-MODULE_PARM_DESC(colorspace_conv,
-		 " Colorspace conversion:"
-		 "\n  0 = disable, 1 = enable"
-		 "\n  Default value is 0"
-		 );
-
-#define ABOUT "V4L-Driver for Vision CPiA based cameras"
-
-#define CPIA_MODULE_CPIA			(0<<5)
-#define CPIA_MODULE_SYSTEM			(1<<5)
-#define CPIA_MODULE_VP_CTRL			(5<<5)
-#define CPIA_MODULE_CAPTURE			(6<<5)
-#define CPIA_MODULE_DEBUG			(7<<5)
-
-#define INPUT (DATA_IN << 8)
-#define OUTPUT (DATA_OUT << 8)
-
-#define CPIA_COMMAND_GetCPIAVersion	(INPUT | CPIA_MODULE_CPIA | 1)
-#define CPIA_COMMAND_GetPnPID		(INPUT | CPIA_MODULE_CPIA | 2)
-#define CPIA_COMMAND_GetCameraStatus	(INPUT | CPIA_MODULE_CPIA | 3)
-#define CPIA_COMMAND_GotoHiPower	(OUTPUT | CPIA_MODULE_CPIA | 4)
-#define CPIA_COMMAND_GotoLoPower	(OUTPUT | CPIA_MODULE_CPIA | 5)
-#define CPIA_COMMAND_GotoSuspend	(OUTPUT | CPIA_MODULE_CPIA | 7)
-#define CPIA_COMMAND_GotoPassThrough	(OUTPUT | CPIA_MODULE_CPIA | 8)
-#define CPIA_COMMAND_ModifyCameraStatus	(OUTPUT | CPIA_MODULE_CPIA | 10)
-
-#define CPIA_COMMAND_ReadVCRegs		(INPUT | CPIA_MODULE_SYSTEM | 1)
-#define CPIA_COMMAND_WriteVCReg		(OUTPUT | CPIA_MODULE_SYSTEM | 2)
-#define CPIA_COMMAND_ReadMCPorts	(INPUT | CPIA_MODULE_SYSTEM | 3)
-#define CPIA_COMMAND_WriteMCPort	(OUTPUT | CPIA_MODULE_SYSTEM | 4)
-#define CPIA_COMMAND_SetBaudRate	(OUTPUT | CPIA_MODULE_SYSTEM | 5)
-#define CPIA_COMMAND_SetECPTiming	(OUTPUT | CPIA_MODULE_SYSTEM | 6)
-#define CPIA_COMMAND_ReadIDATA		(INPUT | CPIA_MODULE_SYSTEM | 7)
-#define CPIA_COMMAND_WriteIDATA		(OUTPUT | CPIA_MODULE_SYSTEM | 8)
-#define CPIA_COMMAND_GenericCall	(OUTPUT | CPIA_MODULE_SYSTEM | 9)
-#define CPIA_COMMAND_I2CStart		(OUTPUT | CPIA_MODULE_SYSTEM | 10)
-#define CPIA_COMMAND_I2CStop		(OUTPUT | CPIA_MODULE_SYSTEM | 11)
-#define CPIA_COMMAND_I2CWrite		(OUTPUT | CPIA_MODULE_SYSTEM | 12)
-#define CPIA_COMMAND_I2CRead		(INPUT | CPIA_MODULE_SYSTEM | 13)
-
-#define CPIA_COMMAND_GetVPVersion	(INPUT | CPIA_MODULE_VP_CTRL | 1)
-#define CPIA_COMMAND_ResetFrameCounter	(INPUT | CPIA_MODULE_VP_CTRL | 2)
-#define CPIA_COMMAND_SetColourParams	(OUTPUT | CPIA_MODULE_VP_CTRL | 3)
-#define CPIA_COMMAND_SetExposure	(OUTPUT | CPIA_MODULE_VP_CTRL | 4)
-#define CPIA_COMMAND_SetColourBalance	(OUTPUT | CPIA_MODULE_VP_CTRL | 6)
-#define CPIA_COMMAND_SetSensorFPS	(OUTPUT | CPIA_MODULE_VP_CTRL | 7)
-#define CPIA_COMMAND_SetVPDefaults	(OUTPUT | CPIA_MODULE_VP_CTRL | 8)
-#define CPIA_COMMAND_SetApcor		(OUTPUT | CPIA_MODULE_VP_CTRL | 9)
-#define CPIA_COMMAND_SetFlickerCtrl	(OUTPUT | CPIA_MODULE_VP_CTRL | 10)
-#define CPIA_COMMAND_SetVLOffset	(OUTPUT | CPIA_MODULE_VP_CTRL | 11)
-#define CPIA_COMMAND_GetColourParams	(INPUT | CPIA_MODULE_VP_CTRL | 16)
-#define CPIA_COMMAND_GetColourBalance	(INPUT | CPIA_MODULE_VP_CTRL | 17)
-#define CPIA_COMMAND_GetExposure	(INPUT | CPIA_MODULE_VP_CTRL | 18)
-#define CPIA_COMMAND_SetSensorMatrix	(OUTPUT | CPIA_MODULE_VP_CTRL | 19)
-#define CPIA_COMMAND_ColourBars		(OUTPUT | CPIA_MODULE_VP_CTRL | 25)
-#define CPIA_COMMAND_ReadVPRegs		(INPUT | CPIA_MODULE_VP_CTRL | 30)
-#define CPIA_COMMAND_WriteVPReg		(OUTPUT | CPIA_MODULE_VP_CTRL | 31)
-
-#define CPIA_COMMAND_GrabFrame		(OUTPUT | CPIA_MODULE_CAPTURE | 1)
-#define CPIA_COMMAND_UploadFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 2)
-#define CPIA_COMMAND_SetGrabMode	(OUTPUT | CPIA_MODULE_CAPTURE | 3)
-#define CPIA_COMMAND_InitStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 4)
-#define CPIA_COMMAND_FiniStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 5)
-#define CPIA_COMMAND_StartStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 6)
-#define CPIA_COMMAND_EndStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 7)
-#define CPIA_COMMAND_SetFormat		(OUTPUT | CPIA_MODULE_CAPTURE | 8)
-#define CPIA_COMMAND_SetROI		(OUTPUT | CPIA_MODULE_CAPTURE | 9)
-#define CPIA_COMMAND_SetCompression	(OUTPUT | CPIA_MODULE_CAPTURE | 10)
-#define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11)
-#define CPIA_COMMAND_SetYUVThresh	(OUTPUT | CPIA_MODULE_CAPTURE | 12)
-#define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13)
-#define CPIA_COMMAND_DiscardFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 14)
-#define CPIA_COMMAND_GrabReset		(OUTPUT | CPIA_MODULE_CAPTURE | 15)
-
-#define CPIA_COMMAND_OutputRS232	(OUTPUT | CPIA_MODULE_DEBUG | 1)
-#define CPIA_COMMAND_AbortProcess	(OUTPUT | CPIA_MODULE_DEBUG | 4)
-#define CPIA_COMMAND_SetDramPage	(OUTPUT | CPIA_MODULE_DEBUG | 5)
-#define CPIA_COMMAND_StartDramUpload	(OUTPUT | CPIA_MODULE_DEBUG | 6)
-#define CPIA_COMMAND_StartDummyDtream	(OUTPUT | CPIA_MODULE_DEBUG | 8)
-#define CPIA_COMMAND_AbortStream	(OUTPUT | CPIA_MODULE_DEBUG | 9)
-#define CPIA_COMMAND_DownloadDRAM	(OUTPUT | CPIA_MODULE_DEBUG | 10)
-#define CPIA_COMMAND_Null		(OUTPUT | CPIA_MODULE_DEBUG | 11)
-
-enum {
-	FRAME_READY,		/* Ready to grab into */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-};
-
-#define COMMAND_NONE			0x0000
-#define COMMAND_SETCOMPRESSION		0x0001
-#define COMMAND_SETCOMPRESSIONTARGET	0x0002
-#define COMMAND_SETCOLOURPARAMS		0x0004
-#define COMMAND_SETFORMAT		0x0008
-#define COMMAND_PAUSE			0x0010
-#define COMMAND_RESUME			0x0020
-#define COMMAND_SETYUVTHRESH		0x0040
-#define COMMAND_SETECPTIMING		0x0080
-#define COMMAND_SETCOMPRESSIONPARAMS	0x0100
-#define COMMAND_SETEXPOSURE		0x0200
-#define COMMAND_SETCOLOURBALANCE	0x0400
-#define COMMAND_SETSENSORFPS		0x0800
-#define COMMAND_SETAPCOR		0x1000
-#define COMMAND_SETFLICKERCTRL		0x2000
-#define COMMAND_SETVLOFFSET		0x4000
-#define COMMAND_SETLIGHTS		0x8000
-
-#define ROUND_UP_EXP_FOR_FLICKER 15
-
-/* Constants for automatic frame rate adjustment */
-#define MAX_EXP       302
-#define MAX_EXP_102   255
-#define LOW_EXP       140
-#define VERY_LOW_EXP   70
-#define TC             94
-#define	EXP_ACC_DARK   50
-#define	EXP_ACC_LIGHT  90
-#define HIGH_COMP_102 160
-#define MAX_COMP      239
-#define DARK_TIME       3
-#define LIGHT_TIME      3
-
-/* Maximum number of 10ms loops to wait for the stream to become ready */
-#define READY_TIMEOUT 100
-
-/* Developer's Guide Table 5 p 3-34
- * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/
-static u8 flicker_jumps[2][2][4] =
-{ { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } },
-  { { 64, 32, 16, 8 }, { 76, 38, 19, 9} }
-};
-
-/* forward declaration of local function */
-static void reset_camera_struct(struct cam_data *cam);
-static int find_over_exposure(int brightness);
-static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-			int on);
-
-
-/**********************************************************************
- *
- * Memory management
- *
- **********************************************************************/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-/**********************************************************************
- *
- * /proc interface
- *
- **********************************************************************/
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *cpia_proc_root=NULL;
-
-static int cpia_proc_show(struct seq_file *m, void *v)
-{
-	struct cam_data *cam = m->private;
-	int tmp;
-	char tmpstr[29];
-
-	seq_printf(m, "read-only\n-----------------------\n");
-	seq_printf(m, "V4L Driver version:       %d.%d.%d\n",
-		       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
-	seq_printf(m, "CPIA Version:             %d.%02d (%d.%d)\n",
-		       cam->params.version.firmwareVersion,
-		       cam->params.version.firmwareRevision,
-		       cam->params.version.vcVersion,
-		       cam->params.version.vcRevision);
-	seq_printf(m, "CPIA PnP-ID:              %04x:%04x:%04x\n",
-		       cam->params.pnpID.vendor, cam->params.pnpID.product,
-		       cam->params.pnpID.deviceRevision);
-	seq_printf(m, "VP-Version:               %d.%d %04x\n",
-		       cam->params.vpVersion.vpVersion,
-		       cam->params.vpVersion.vpRevision,
-		       cam->params.vpVersion.cameraHeadID);
-
-	seq_printf(m, "system_state:             %#04x\n",
-		       cam->params.status.systemState);
-	seq_printf(m, "grab_state:               %#04x\n",
-		       cam->params.status.grabState);
-	seq_printf(m, "stream_state:             %#04x\n",
-		       cam->params.status.streamState);
-	seq_printf(m, "fatal_error:              %#04x\n",
-		       cam->params.status.fatalError);
-	seq_printf(m, "cmd_error:                %#04x\n",
-		       cam->params.status.cmdError);
-	seq_printf(m, "debug_flags:              %#04x\n",
-		       cam->params.status.debugFlags);
-	seq_printf(m, "vp_status:                %#04x\n",
-		       cam->params.status.vpStatus);
-	seq_printf(m, "error_code:               %#04x\n",
-		       cam->params.status.errorCode);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "button:                   %4d\n",
-			       cam->params.qx3.button);
-		seq_printf(m, "cradled:                  %4d\n",
-			       cam->params.qx3.cradled);
-	}
-	seq_printf(m, "video_size:               %s\n",
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ?
-		       "CIF " : "QCIF");
-	seq_printf(m, "roi:                      (%3d, %3d) to (%3d, %3d)\n",
-		       cam->params.roi.colStart*8,
-		       cam->params.roi.rowStart*4,
-		       cam->params.roi.colEnd*8,
-		       cam->params.roi.rowEnd*4);
-	seq_printf(m, "actual_fps:               %3d\n", cam->fps);
-	seq_printf(m, "transfer_rate:            %4dkB/s\n",
-		       cam->transfer_rate);
-
-	seq_printf(m, "\nread-write\n");
-	seq_printf(m, "-----------------------  current       min"
-		       "       max   default  comment\n");
-	seq_printf(m, "brightness:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.brightness, 0, 100, 50);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits contrast to 80 */
-		tmp = 80;
-	else
-		tmp = 96;
-
-	seq_printf(m, "contrast:               %8d  %8d  %8d  %8d"
-		       "  steps of 8\n",
-		       cam->params.colourParams.contrast, 0, tmp, 48);
-	seq_printf(m, "saturation:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.saturation, 0, 100, 50);
-	tmp = (25000+5000*cam->params.sensorFps.baserate)/
-	      (1<<cam->params.sensorFps.divisor);
-	seq_printf(m, "sensor_fps:             %4d.%03d  %8d  %8d  %8d\n",
-		       tmp/1000, tmp%1000, 3, 30, 15);
-	seq_printf(m, "stream_start_line:      %8d  %8d  %8d  %8d\n",
-		       2*cam->params.streamStartLine, 0,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120);
-	seq_printf(m, "sub_sample:             %8s  %8s  %8s  %8s\n",
-		       cam->params.format.subSample == SUBSAMPLE_420 ?
-		       "420" : "422", "420", "422", "422");
-	seq_printf(m, "yuv_order:              %8s  %8s  %8s  %8s\n",
-		       cam->params.format.yuvOrder == YUVORDER_YUYV ?
-		       "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV");
-	seq_printf(m, "ecp_timing:             %8s  %8s  %8s  %8s\n",
-		       cam->params.ecpTiming ? "slow" : "normal", "slow",
-		       "normal", "normal");
-
-	if (cam->params.colourBalance.balanceMode == 2) {
-		sprintf(tmpstr, "auto");
-	} else {
-		sprintf(tmpstr, "manual");
-	}
-	seq_printf(m, "color_balance_mode:     %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "red_gain:               %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.redGain, 0, 212, 32);
-	seq_printf(m, "green_gain:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.greenGain, 0, 212, 6);
-	seq_printf(m, "blue_gain:              %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.blueGain, 0, 212, 92);
-
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits gain to 2 */
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 2, 2);
-	else
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 8, 2);
-
-	if (cam->params.exposure.gainMode == 0)
-		seq_printf(m, "max_gain:                unknown  %28s"
-			       "  powers of 2\n", tmpstr);
-	else
-		seq_printf(m, "max_gain:               %8d  %28s"
-			       "  1,2,4 or 8 \n",
-			       1<<(cam->params.exposure.gainMode-1), tmpstr);
-
-	switch(cam->params.exposure.expMode) {
-	case 1:
-	case 3:
-		sprintf(tmpstr, "manual");
-		break;
-	case 2:
-		sprintf(tmpstr, "auto");
-		break;
-	default:
-		sprintf(tmpstr, "unknown");
-		break;
-	}
-	seq_printf(m, "exposure_mode:          %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "centre_weight:          %8s  %8s  %8s  %8s\n",
-		       (2-cam->params.exposure.centreWeight) ? "on" : "off",
-		       "off", "on", "on");
-	seq_printf(m, "gain:                   %8d  %8d  max_gain  %8d  1,2,4,8 possible\n",
-		       1<<cam->params.exposure.gain, 1, 1);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits fineExp/2 to 127 */
-		tmp = 254;
-	else
-		tmp = 510;
-
-	seq_printf(m, "fine_exp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.fineExp*2, 0, tmp, 0);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits coarseExpHi to 0 */
-		tmp = MAX_EXP_102;
-	else
-		tmp = MAX_EXP;
-
-	seq_printf(m, "coarse_exp:             %8d  %8d  %8d"
-		       "  %8d\n", cam->params.exposure.coarseExpLo+
-		       256*cam->params.exposure.coarseExpHi, 0, tmp, 185);
-	seq_printf(m, "red_comp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
-	seq_printf(m, "green1_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green1Comp, COMP_GREEN1, 255,
-		       COMP_GREEN1);
-	seq_printf(m, "green2_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green2Comp, COMP_GREEN2, 255,
-		       COMP_GREEN2);
-	seq_printf(m, "blue_comp:              %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
-
-	seq_printf(m, "apcor_gain1:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain1, 0, 0xff, 0x1c);
-	seq_printf(m, "apcor_gain2:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain2, 0, 0xff, 0x1a);
-	seq_printf(m, "apcor_gain4:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain4, 0, 0xff, 0x2d);
-	seq_printf(m, "apcor_gain8:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain8, 0, 0xff, 0x2a);
-	seq_printf(m, "vl_offset_gain1:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain1, 0, 255, 24);
-	seq_printf(m, "vl_offset_gain2:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain2, 0, 255, 28);
-	seq_printf(m, "vl_offset_gain4:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain4, 0, 255, 30);
-	seq_printf(m, "vl_offset_gain8:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain8, 0, 255, 30);
-	seq_printf(m, "flicker_control:        %8s  %8s  %8s  %8s\n",
-		       cam->params.flickerControl.flickerMode ? "on" : "off",
-		       "off", "on", "off");
-	seq_printf(m, "mains_frequency:        %8d  %8d  %8d  %8d"
-		       " only 50/60\n",
-		       cam->mainsFreq ? 60 : 50, 50, 60, 50);
-	if(cam->params.flickerControl.allowableOverExposure < 0)
-		seq_printf(m, "allowable_overexposure: %4dauto      auto  %8d      auto\n",
-			       -cam->params.flickerControl.allowableOverExposure,
-			       255);
-	else
-		seq_printf(m, "allowable_overexposure: %8d      auto  %8d      auto\n",
-			       cam->params.flickerControl.allowableOverExposure,
-			       255);
-	seq_printf(m, "compression_mode:       ");
-	switch(cam->params.compression.mode) {
-	case CPIA_COMPRESSION_NONE:
-		seq_printf(m, "%8s", "none");
-		break;
-	case CPIA_COMPRESSION_AUTO:
-		seq_printf(m, "%8s", "auto");
-		break;
-	case CPIA_COMPRESSION_MANUAL:
-		seq_printf(m, "%8s", "manual");
-		break;
-	default:
-		seq_printf(m, "%8s", "unknown");
-		break;
-	}
-	seq_printf(m, "    none,auto,manual      auto\n");
-	seq_printf(m, "decimation_enable:      %8s  %8s  %8s  %8s\n",
-		       cam->params.compression.decimation ==
-		       DECIMATION_ENAB ? "on":"off", "off", "on",
-		       "off");
-	seq_printf(m, "compression_target:    %9s %9s %9s %9s\n",
-		       cam->params.compressionTarget.frTargeting  ==
-		       CPIA_COMPRESSION_TARGET_FRAMERATE ?
-		       "framerate":"quality",
-		       "framerate", "quality", "quality");
-	seq_printf(m, "target_framerate:       %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetFR, 1, 30, 15);
-	seq_printf(m, "target_quality:         %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetQ, 1, 64, 5);
-	seq_printf(m, "y_threshold:            %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.yThreshold, 0, 31, 6);
-	seq_printf(m, "uv_threshold:           %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
-	seq_printf(m, "hysteresis:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.hysteresis, 0, 255, 3);
-	seq_printf(m, "threshold_max:          %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.threshMax, 0, 255, 11);
-	seq_printf(m, "small_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.smallStep, 0, 255, 1);
-	seq_printf(m, "large_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.largeStep, 0, 255, 3);
-	seq_printf(m, "decimation_hysteresis:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationHysteresis,
-		       0, 255, 2);
-	seq_printf(m, "fr_diff_step_thresh:    %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.frDiffStepThresh,
-		       0, 255, 5);
-	seq_printf(m, "q_diff_step_thresh:     %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.qDiffStepThresh,
-		       0, 255, 3);
-	seq_printf(m, "decimation_thresh_mod:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationThreshMod,
-		       0, 255, 2);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "toplight:               %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.toplight ? "on" : "off",
-			       "off", "on", "off");
-		seq_printf(m, "bottomlight:            %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.bottomlight ? "on" : "off",
-			       "off", "on", "off");
-	}
-
-	return 0;
-}
-
-static int cpia_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cpia_proc_show, PDE(inode)->data);
-}
-
-static int match(char *checkstr, char **buffer, size_t *count,
-		 int *find_colon, int *err)
-{
-	int ret, colon_found = 1;
-	int len = strlen(checkstr);
-	ret = (len <= *count && strncmp(*buffer, checkstr, len) == 0);
-	if (ret) {
-		*buffer += len;
-		*count -= len;
-		if (*find_colon) {
-			colon_found = 0;
-			while (*count && (**buffer == ' ' || **buffer == '\t' ||
-					  (!colon_found && **buffer == ':'))) {
-				if (**buffer == ':')
-					colon_found = 1;
-				--*count;
-				++*buffer;
-			}
-			if (!*count || !colon_found)
-				*err = -EINVAL;
-			*find_colon = 0;
-		}
-	}
-	return ret;
-}
-
-static unsigned long int value(char **buffer, size_t *count, int *err)
-{
-	char *p;
-	unsigned long int ret;
-	ret = simple_strtoul(*buffer, &p, 0);
-	if (p == *buffer)
-		*err = -EINVAL;
-	else {
-		*count -= p - *buffer;
-		*buffer = p;
-	}
-	return ret;
-}
-
-static ssize_t cpia_proc_write(struct file *file, const char __user *buf,
-			       size_t count, loff_t *pos)
-{
-	struct cam_data *cam = PDE(file->f_path.dentry->d_inode)->data;
-	struct cam_params new_params;
-	char *page, *buffer;
-	int retval, find_colon;
-	int size = count;
-	unsigned long val = 0;
-	u32 command_flags = 0;
-	u8 new_mains;
-
-	/*
-	 * This code to copy from buf to page is shamelessly copied
-	 * from the comx driver
-	 */
-	if (count > PAGE_SIZE) {
-		printk(KERN_ERR "count is %zu > %d!!!\n", count, (int)PAGE_SIZE);
-		return -ENOSPC;
-	}
-
-	if (!(page = (char *)__get_free_page(GFP_KERNEL))) return -ENOMEM;
-
-	if(copy_from_user(page, buf, count))
-	{
-		retval = -EFAULT;
-		goto out;
-	}
-
-	if (page[count-1] == '\n')
-		page[count-1] = '\0';
-	else if (count < PAGE_SIZE)
-		page[count] = '\0';
-	else if (page[count]) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	buffer = page;
-
-	if (mutex_lock_interruptible(&cam->param_lock))
-		return -ERESTARTSYS;
-
-	/*
-	 * Skip over leading whitespace
-	 */
-	while (count && isspace(*buffer)) {
-		--count;
-		++buffer;
-	}
-
-	memcpy(&new_params, &cam->params, sizeof(struct cam_params));
-	new_mains = cam->mainsFreq;
-
-#define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval))
-#define VALUE (value(&buffer,&count, &retval))
-#define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \
-			       new_params.version.firmwareRevision == (y))
-
-	retval = 0;
-	while (count && !retval) {
-		find_colon = 1;
-		if (MATCH("brightness")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.brightness = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-			if(new_params.flickerControl.allowableOverExposure < 0)
-				new_params.flickerControl.allowableOverExposure =
-					-find_over_exposure(new_params.colourParams.brightness);
-			if(new_params.flickerControl.flickerMode != 0)
-				command_flags |= COMMAND_SETFLICKERCTRL;
-
-		} else if (MATCH("contrast")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100) {
-					/* contrast is in steps of 8, so round*/
-					val = ((val + 3) / 8) * 8;
-					/* 1-02 firmware limits contrast to 80*/
-					if (FIRMWARE_VERSION(1,2) && val > 80)
-						val = 80;
-
-					new_params.colourParams.contrast = val;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("saturation")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.saturation = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("sensor_fps")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* find values so that sensorFPS is minimized,
-				 * but >= val */
-				if (val > 30)
-					retval = -EINVAL;
-				else if (val > 25) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 15) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 12) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 7) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 6) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 3) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 0;
-				} else {
-					new_params.sensorFps.divisor = 3;
-					/* Either base rate would work here */
-					new_params.sensorFps.baserate = 1;
-				}
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			}
-			command_flags |= COMMAND_SETSENSORFPS;
-			cam->exposure_status = EXPOSURE_NORMAL;
-		} else if (MATCH("stream_start_line")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				int max_line = 288;
-
-				if (new_params.format.videoSize == VIDEOSIZE_QCIF)
-					max_line = 144;
-				if (val <= max_line)
-					new_params.streamStartLine = val/2;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("sub_sample")) {
-			if (!retval && MATCH("420"))
-				new_params.format.subSample = SUBSAMPLE_420;
-			else if (!retval && MATCH("422"))
-				new_params.format.subSample = SUBSAMPLE_422;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("yuv_order")) {
-			if (!retval && MATCH("YUYV"))
-				new_params.format.yuvOrder = YUVORDER_YUYV;
-			else if (!retval && MATCH("UYVY"))
-				new_params.format.yuvOrder = YUVORDER_UYVY;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("ecp_timing")) {
-			if (!retval && MATCH("normal"))
-				new_params.ecpTiming = 0;
-			else if (!retval && MATCH("slow"))
-				new_params.ecpTiming = 1;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETECPTIMING;
-		} else if (MATCH("color_balance_mode")) {
-			if (!retval && MATCH("manual"))
-				new_params.colourBalance.balanceMode = 3;
-			else if (!retval && MATCH("auto"))
-				new_params.colourBalance.balanceMode = 2;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("red_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.redGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("green_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.greenGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("blue_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.blueGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("max_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* 1-02 firmware limits gain to 2 */
-				if (FIRMWARE_VERSION(1,2) && val > 2)
-					val = 2;
-				switch(val) {
-				case 1:
-					new_params.exposure.gainMode = 1;
-					break;
-				case 2:
-					new_params.exposure.gainMode = 2;
-					break;
-				case 4:
-					new_params.exposure.gainMode = 3;
-					break;
-				case 8:
-					new_params.exposure.gainMode = 4;
-					break;
-				default:
-					retval = -EINVAL;
-					break;
-				}
-			}
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("exposure_mode")) {
-			if (!retval && MATCH("auto"))
-				new_params.exposure.expMode = 2;
-			else if (!retval && MATCH("manual")) {
-				if (new_params.exposure.expMode == 2)
-					new_params.exposure.expMode = 3;
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				new_params.flickerControl.flickerMode = 0;
-			} else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("centre_weight")) {
-			if (!retval && MATCH("on"))
-				new_params.exposure.centreWeight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.exposure.centreWeight = 2;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				switch(val) {
-				case 1:
-					new_params.exposure.gain = 0;
-					break;
-				case 2:
-					new_params.exposure.gain = 1;
-					break;
-				case 4:
-					new_params.exposure.gain = 2;
-					break;
-				case 8:
-					new_params.exposure.gain = 3;
-					break;
-				default:
-					retval = -EINVAL;
-					break;
-				}
-				new_params.exposure.expMode = 1;
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				new_params.flickerControl.flickerMode = 0;
-				command_flags |= COMMAND_SETEXPOSURE;
-				if (new_params.exposure.gain >
-				    new_params.exposure.gainMode-1)
-					retval = -EINVAL;
-			}
-		} else if (MATCH("fine_exp")) {
-			if (!retval)
-				val = VALUE/2;
-
-			if (!retval) {
-				if (val < 256) {
-					/* 1-02 firmware limits fineExp/2 to 127*/
-					if (FIRMWARE_VERSION(1,2) && val > 127)
-						val = 127;
-					new_params.exposure.fineExp = val;
-					new_params.exposure.expMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-					if(new_params.flickerControl.flickerMode != 0)
-						command_flags |= COMMAND_SETFLICKERCTRL;
-					new_params.flickerControl.flickerMode = 0;
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("coarse_exp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= MAX_EXP) {
-					if (FIRMWARE_VERSION(1,2) &&
-					    val > MAX_EXP_102)
-						val = MAX_EXP_102;
-					new_params.exposure.coarseExpLo =
-						val & 0xff;
-					new_params.exposure.coarseExpHi =
-						val >> 8;
-					new_params.exposure.expMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-					if(new_params.flickerControl.flickerMode != 0)
-						command_flags |= COMMAND_SETFLICKERCTRL;
-					new_params.flickerControl.flickerMode = 0;
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("red_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_RED && val <= 255) {
-					new_params.exposure.redComp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("green1_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_GREEN1 && val <= 255) {
-					new_params.exposure.green1Comp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("green2_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_GREEN2 && val <= 255) {
-					new_params.exposure.green2Comp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("blue_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_BLUE && val <= 255) {
-					new_params.exposure.blueComp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain1")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain1 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain2")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain2 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain4")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain4 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain8")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain8 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("vl_offset_gain1")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain1 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain2")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain2 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain4")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain4 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain8")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain8 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("flicker_control")) {
-			if (!retval && MATCH("on")) {
-				set_flicker(&new_params, &command_flags, 1);
-			} else if (!retval && MATCH("off")) {
-				set_flicker(&new_params, &command_flags, 0);
-			} else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFLICKERCTRL;
-		} else if (MATCH("mains_frequency")) {
-			if (!retval && MATCH("50")) {
-				new_mains = 0;
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else if (!retval && MATCH("60")) {
-				new_mains = 1;
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else
-				retval = -EINVAL;
-		} else if (MATCH("allowable_overexposure")) {
-			if (!retval && MATCH("auto")) {
-				new_params.flickerControl.allowableOverExposure =
-					-find_over_exposure(new_params.colourParams.brightness);
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else {
-				if (!retval)
-					val = VALUE;
-
-				if (!retval) {
-					if (val <= 0xff) {
-						new_params.flickerControl.
-							allowableOverExposure = val;
-						if(new_params.flickerControl.flickerMode != 0)
-							command_flags |= COMMAND_SETFLICKERCTRL;
-					} else
-						retval = -EINVAL;
-				}
-			}
-		} else if (MATCH("compression_mode")) {
-			if (!retval && MATCH("none"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_NONE;
-			else if (!retval && MATCH("auto"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_AUTO;
-			else if (!retval && MATCH("manual"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_MANUAL;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSION;
-		} else if (MATCH("decimation_enable")) {
-			if (!retval && MATCH("off"))
-				new_params.compression.decimation = 0;
-			else if (!retval && MATCH("on"))
-				new_params.compression.decimation = 1;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSION;
-		} else if (MATCH("compression_target")) {
-			if (!retval && MATCH("quality"))
-				new_params.compressionTarget.frTargeting =
-					CPIA_COMPRESSION_TARGET_QUALITY;
-			else if (!retval && MATCH("framerate"))
-				new_params.compressionTarget.frTargeting =
-					CPIA_COMPRESSION_TARGET_FRAMERATE;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("target_framerate")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if(val > 0 && val <= 30)
-					new_params.compressionTarget.targetFR = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("target_quality")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if(val > 0 && val <= 64)
-					new_params.compressionTarget.targetQ = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("y_threshold")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val < 32)
-					new_params.yuvThreshold.yThreshold = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETYUVTHRESH;
-		} else if (MATCH("uv_threshold")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val < 32)
-					new_params.yuvThreshold.uvThreshold = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETYUVTHRESH;
-		} else if (MATCH("hysteresis")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.hysteresis = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("threshold_max")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.threshMax = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("small_step")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.smallStep = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("large_step")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.largeStep = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("decimation_hysteresis")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.decimationHysteresis = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("fr_diff_step_thresh")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.frDiffStepThresh = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("q_diff_step_thresh")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.qDiffStepThresh = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("decimation_thresh_mod")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.decimationThreshMod = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("toplight")) {
-			if (!retval && MATCH("on"))
-				new_params.qx3.toplight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.qx3.toplight = 0;
-			else
-				retval = -EINVAL;
-			command_flags |= COMMAND_SETLIGHTS;
-		} else if (MATCH("bottomlight")) {
-			if (!retval && MATCH("on"))
-				new_params.qx3.bottomlight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.qx3.bottomlight = 0;
-			else
-				retval = -EINVAL;
-			command_flags |= COMMAND_SETLIGHTS;
-		} else {
-			DBG("No match found\n");
-			retval = -EINVAL;
-		}
-
-		if (!retval) {
-			while (count && isspace(*buffer) && *buffer != '\n') {
-				--count;
-				++buffer;
-			}
-			if (count) {
-				if (*buffer == '\0' && count != 1)
-					retval = -EINVAL;
-				else if (*buffer != '\n' && *buffer != ';' &&
-					 *buffer != '\0')
-					retval = -EINVAL;
-				else {
-					--count;
-					++buffer;
-				}
-			}
-		}
-	}
-#undef MATCH
-#undef VALUE
-#undef FIRMWARE_VERSION
-	if (!retval) {
-		if (command_flags & COMMAND_SETCOLOURPARAMS) {
-			/* Adjust cam->vp to reflect these changes */
-			cam->vp.brightness =
-				new_params.colourParams.brightness*65535/100;
-			cam->vp.contrast =
-				new_params.colourParams.contrast*65535/100;
-			cam->vp.colour =
-				new_params.colourParams.saturation*65535/100;
-		}
-		if((command_flags & COMMAND_SETEXPOSURE) &&
-		   new_params.exposure.expMode == 2)
-			cam->exposure_status = EXPOSURE_NORMAL;
-
-		memcpy(&cam->params, &new_params, sizeof(struct cam_params));
-		cam->mainsFreq = new_mains;
-		cam->cmd_queue |= command_flags;
-		retval = size;
-	} else
-		DBG("error: %d\n", retval);
-
-	mutex_unlock(&cam->param_lock);
-
-out:
-	free_page((unsigned long)page);
-	return retval;
-}
-
-static const struct file_operations cpia_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cpia_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= cpia_proc_write,
-};
-
-static void create_proc_cpia_cam(struct cam_data *cam)
-{
-	struct proc_dir_entry *ent;
-
-	if (!cpia_proc_root || !cam)
-		return;
-
-	ent = proc_create_data(video_device_node_name(&cam->vdev),
-			       S_IRUGO|S_IWUSR, cpia_proc_root,
-			       &cpia_proc_fops, cam);
-	if (!ent)
-		return;
-
-	/*
-	   size of the proc entry is 3736 bytes for the standard webcam;
-	   the extra features of the QX3 microscope add 189 bytes.
-	   (we have not yet probed the camera to see which type it is).
-	*/
-	ent->size = 3736 + 189;
-	cam->proc_entry = ent;
-}
-
-static void destroy_proc_cpia_cam(struct cam_data *cam)
-{
-	if (!cam || !cam->proc_entry)
-		return;
-
-	remove_proc_entry(video_device_node_name(&cam->vdev), cpia_proc_root);
-	cam->proc_entry = NULL;
-}
-
-static void proc_cpia_create(void)
-{
-	cpia_proc_root = proc_mkdir("cpia", NULL);
-
-	if (!cpia_proc_root)
-		LOG("Unable to initialise /proc/cpia\n");
-}
-
-static void __exit proc_cpia_destroy(void)
-{
-	remove_proc_entry("cpia", NULL);
-}
-#endif /* CONFIG_PROC_FS */
-
-/* ----------------------- debug functions ---------------------- */
-
-#define printstatus(cam) \
-  DBG("%02x %02x %02x %02x %02x %02x %02x %02x\n",\
-	cam->params.status.systemState, cam->params.status.grabState, \
-	cam->params.status.streamState, cam->params.status.fatalError, \
-	cam->params.status.cmdError, cam->params.status.debugFlags, \
-	cam->params.status.vpStatus, cam->params.status.errorCode);
-
-/* ----------------------- v4l helpers -------------------------- */
-
-/* supported frame palettes and depths */
-static inline int valid_mode(u16 palette, u16 depth)
-{
-	if ((palette == VIDEO_PALETTE_YUV422 && depth == 16) ||
-	    (palette == VIDEO_PALETTE_YUYV && depth == 16))
-		return 1;
-
-	if (colorspace_conv)
-		return (palette == VIDEO_PALETTE_GREY && depth == 8) ||
-		       (palette == VIDEO_PALETTE_RGB555 && depth == 16) ||
-		       (palette == VIDEO_PALETTE_RGB565 && depth == 16) ||
-		       (palette == VIDEO_PALETTE_RGB24 && depth == 24) ||
-		       (palette == VIDEO_PALETTE_RGB32 && depth == 32) ||
-		       (palette == VIDEO_PALETTE_UYVY && depth == 16);
-
-	return 0;
-}
-
-static int match_videosize( int width, int height )
-{
-	/* return the best match, where 'best' is as always
-	 * the largest that is not bigger than what is requested. */
-	if (width>=352 && height>=288)
-		return VIDEOSIZE_352_288; /* CIF */
-
-	if (width>=320 && height>=240)
-		return VIDEOSIZE_320_240; /* SIF */
-
-	if (width>=288 && height>=216)
-		return VIDEOSIZE_288_216;
-
-	if (width>=256 && height>=192)
-		return VIDEOSIZE_256_192;
-
-	if (width>=224 && height>=168)
-		return VIDEOSIZE_224_168;
-
-	if (width>=192 && height>=144)
-		return VIDEOSIZE_192_144;
-
-	if (width>=176 && height>=144)
-		return VIDEOSIZE_176_144; /* QCIF */
-
-	if (width>=160 && height>=120)
-		return VIDEOSIZE_160_120; /* QSIF */
-
-	if (width>=128 && height>=96)
-		return VIDEOSIZE_128_96;
-
-	if (width>=88 && height>=72)
-		return VIDEOSIZE_88_72;
-
-	if (width>=64 && height>=48)
-		return VIDEOSIZE_64_48;
-
-	if (width>=48 && height>=48)
-		return VIDEOSIZE_48_48;
-
-	return -1;
-}
-
-/* these are the capture sizes we support */
-static void set_vw_size(struct cam_data *cam)
-{
-	/* the col/row/start/end values are the result of simple math    */
-	/* study the SetROI-command in cpia developers guide p 2-22      */
-	/* streamStartLine is set to the recommended value in the cpia   */
-	/*  developers guide p 3-37                                      */
-	switch(cam->video_size) {
-	case VIDEOSIZE_CIF:
-		cam->vw.width = 352;
-		cam->vw.height = 288;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=0;
-		cam->params.roi.rowStart=0;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_SIF:
-		cam->vw.width = 320;
-		cam->vw.height = 240;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=2;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_288_216:
-		cam->vw.width = 288;
-		cam->vw.height = 216;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=4;
-		cam->params.roi.rowStart=9;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_256_192:
-		cam->vw.width = 256;
-		cam->vw.height = 192;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=6;
-		cam->params.roi.rowStart=12;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_224_168:
-		cam->vw.width = 224;
-		cam->vw.height = 168;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=8;
-		cam->params.roi.rowStart=15;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_192_144:
-		cam->vw.width = 192;
-		cam->vw.height = 144;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=10;
-		cam->params.roi.rowStart=18;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_QCIF:
-		cam->vw.width = 176;
-		cam->vw.height = 144;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=0;
-		cam->params.roi.rowStart=0;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_QSIF:
-		cam->vw.width = 160;
-		cam->vw.height = 120;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=1;
-		cam->params.roi.rowStart=3;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_128_96:
-		cam->vw.width = 128;
-		cam->vw.height = 96;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=3;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_88_72:
-		cam->vw.width = 88;
-		cam->vw.height = 72;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=5;
-		cam->params.roi.rowStart=9;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_64_48:
-		cam->vw.width = 64;
-		cam->vw.height = 48;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=7;
-		cam->params.roi.rowStart=12;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_48_48:
-		cam->vw.width = 48;
-		cam->vw.height = 48;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=8;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 60;
-		break;
-	default:
-		LOG("bad videosize value: %d\n", cam->video_size);
-		return;
-	}
-
-	if(cam->vc.width == 0)
-		cam->vc.width = cam->vw.width;
-	if(cam->vc.height == 0)
-		cam->vc.height = cam->vw.height;
-
-	cam->params.roi.colStart += cam->vc.x >> 3;
-	cam->params.roi.colEnd = cam->params.roi.colStart +
-				 (cam->vc.width >> 3);
-	cam->params.roi.rowStart += cam->vc.y >> 2;
-	cam->params.roi.rowEnd = cam->params.roi.rowStart +
-				 (cam->vc.height >> 2);
-
-	return;
-}
-
-static int allocate_frame_buf(struct cam_data *cam)
-{
-	int i;
-
-	cam->frame_buf = rvmalloc(FRAME_NUM * CPIA_MAX_FRAME_SIZE);
-	if (!cam->frame_buf)
-		return -ENOBUFS;
-
-	for (i = 0; i < FRAME_NUM; i++)
-		cam->frame[i].data = cam->frame_buf + i * CPIA_MAX_FRAME_SIZE;
-
-	return 0;
-}
-
-static int free_frame_buf(struct cam_data *cam)
-{
-	int i;
-
-	rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE);
-	cam->frame_buf = NULL;
-	for (i=0; i < FRAME_NUM; i++)
-		cam->frame[i].data = NULL;
-
-	return 0;
-}
-
-
-static inline void free_frames(struct cpia_frame frame[FRAME_NUM])
-{
-	int i;
-
-	for (i=0; i < FRAME_NUM; i++)
-		frame[i].state = FRAME_UNUSED;
-	return;
-}
-
-/**********************************************************************
- *
- * General functions
- *
- **********************************************************************/
-/* send an arbitrary command to the camera */
-static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d)
-{
-	int retval, datasize;
-	u8 cmd[8], data[8];
-
-	switch(command) {
-	case CPIA_COMMAND_GetCPIAVersion:
-	case CPIA_COMMAND_GetPnPID:
-	case CPIA_COMMAND_GetCameraStatus:
-	case CPIA_COMMAND_GetVPVersion:
-		datasize=8;
-		break;
-	case CPIA_COMMAND_GetColourParams:
-	case CPIA_COMMAND_GetColourBalance:
-	case CPIA_COMMAND_GetExposure:
-		mutex_lock(&cam->param_lock);
-		datasize=8;
-		break;
-	case CPIA_COMMAND_ReadMCPorts:
-	case CPIA_COMMAND_ReadVCRegs:
-		datasize = 4;
-		break;
-	default:
-		datasize=0;
-		break;
-	}
-
-	cmd[0] = command>>8;
-	cmd[1] = command&0xff;
-	cmd[2] = a;
-	cmd[3] = b;
-	cmd[4] = c;
-	cmd[5] = d;
-	cmd[6] = datasize;
-	cmd[7] = 0;
-
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval) {
-		DBG("%x - failed, retval=%d\n", command, retval);
-		if (command == CPIA_COMMAND_GetColourParams ||
-		    command == CPIA_COMMAND_GetColourBalance ||
-		    command == CPIA_COMMAND_GetExposure)
-			mutex_unlock(&cam->param_lock);
-	} else {
-		switch(command) {
-		case CPIA_COMMAND_GetCPIAVersion:
-			cam->params.version.firmwareVersion = data[0];
-			cam->params.version.firmwareRevision = data[1];
-			cam->params.version.vcVersion = data[2];
-			cam->params.version.vcRevision = data[3];
-			break;
-		case CPIA_COMMAND_GetPnPID:
-			cam->params.pnpID.vendor = data[0]+(((u16)data[1])<<8);
-			cam->params.pnpID.product = data[2]+(((u16)data[3])<<8);
-			cam->params.pnpID.deviceRevision =
-				data[4]+(((u16)data[5])<<8);
-			break;
-		case CPIA_COMMAND_GetCameraStatus:
-			cam->params.status.systemState = data[0];
-			cam->params.status.grabState = data[1];
-			cam->params.status.streamState = data[2];
-			cam->params.status.fatalError = data[3];
-			cam->params.status.cmdError = data[4];
-			cam->params.status.debugFlags = data[5];
-			cam->params.status.vpStatus = data[6];
-			cam->params.status.errorCode = data[7];
-			break;
-		case CPIA_COMMAND_GetVPVersion:
-			cam->params.vpVersion.vpVersion = data[0];
-			cam->params.vpVersion.vpRevision = data[1];
-			cam->params.vpVersion.cameraHeadID =
-				data[2]+(((u16)data[3])<<8);
-			break;
-		case CPIA_COMMAND_GetColourParams:
-			cam->params.colourParams.brightness = data[0];
-			cam->params.colourParams.contrast = data[1];
-			cam->params.colourParams.saturation = data[2];
-			mutex_unlock(&cam->param_lock);
-			break;
-		case CPIA_COMMAND_GetColourBalance:
-			cam->params.colourBalance.redGain = data[0];
-			cam->params.colourBalance.greenGain = data[1];
-			cam->params.colourBalance.blueGain = data[2];
-			mutex_unlock(&cam->param_lock);
-			break;
-		case CPIA_COMMAND_GetExposure:
-			cam->params.exposure.gain = data[0];
-			cam->params.exposure.fineExp = data[1];
-			cam->params.exposure.coarseExpLo = data[2];
-			cam->params.exposure.coarseExpHi = data[3];
-			cam->params.exposure.redComp = data[4];
-			cam->params.exposure.green1Comp = data[5];
-			cam->params.exposure.green2Comp = data[6];
-			cam->params.exposure.blueComp = data[7];
-			mutex_unlock(&cam->param_lock);
-			break;
-
-		case CPIA_COMMAND_ReadMCPorts:
-			if (!cam->params.qx3.qx3_detected)
-				break;
-			/* test button press */
-			cam->params.qx3.button = ((data[1] & 0x02) == 0);
-			if (cam->params.qx3.button) {
-				/* button pressed - unlock the latch */
-				do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xDF,0xDF,0);
-				do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xFF,0xFF,0);
-			}
-
-			/* test whether microscope is cradled */
-			cam->params.qx3.cradled = ((data[2] & 0x40) == 0);
-			break;
-
-		default:
-			break;
-		}
-	}
-	return retval;
-}
-
-/* send a command  to the camera with an additional data transaction */
-static int do_command_extended(struct cam_data *cam, u16 command,
-			       u8 a, u8 b, u8 c, u8 d,
-			       u8 e, u8 f, u8 g, u8 h,
-			       u8 i, u8 j, u8 k, u8 l)
-{
-	int retval;
-	u8 cmd[8], data[8];
-
-	cmd[0] = command>>8;
-	cmd[1] = command&0xff;
-	cmd[2] = a;
-	cmd[3] = b;
-	cmd[4] = c;
-	cmd[5] = d;
-	cmd[6] = 8;
-	cmd[7] = 0;
-	data[0] = e;
-	data[1] = f;
-	data[2] = g;
-	data[3] = h;
-	data[4] = i;
-	data[5] = j;
-	data[6] = k;
-	data[7] = l;
-
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval)
-		DBG("%x - failed\n", command);
-
-	return retval;
-}
-
-/**********************************************************************
- *
- * Colorspace conversion
- *
- **********************************************************************/
-#define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16)
-
-static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-		      int linesize, int mmap_kludge)
-{
-	int y, u, v, r, g, b, y1;
-
-	/* Odd lines use the same u and v as the previous line.
-	 * Because of compression, it is necessary to get this
-	 * information from the decoded image. */
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		r = ((*(rgb+1-linesize)) & 0x7c) << 1;
-		g = ((*(rgb-linesize)) & 0xe0) >> 4 |
-		    ((*(rgb+1-linesize)) & 0x03) << 6;
-		b = ((*(rgb-linesize)) & 0x1f) << 3;
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u - 53294 * v;
-		b = 132278 * u;
-		*rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3);
-		*rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6);
-		*rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3);
-		*rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6);
-		return 4;
-	case VIDEO_PALETTE_RGB565:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		r = (*(rgb+1-linesize)) & 0xf8;
-		g = ((*(rgb-linesize)) & 0xe0) >> 3 |
-		    ((*(rgb+1-linesize)) & 0x07) << 5;
-		b = ((*(rgb-linesize)) & 0x1f) << 3;
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u - 53294 * v;
-		b = 132278 * u;
-		*rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3);
-		*rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5);
-		*rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3);
-		*rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5);
-		return 4;
-		break;
-	case VIDEO_PALETTE_RGB24:
-	case VIDEO_PALETTE_RGB32:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		if (mmap_kludge) {
-			r = *(rgb+2-linesize);
-			g = *(rgb+1-linesize);
-			b = *(rgb-linesize);
-		} else {
-			r = *(rgb-linesize);
-			g = *(rgb+1-linesize);
-			b = *(rgb+2-linesize);
-		}
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u + -53294 * v;
-		b = 132278 * u;
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			if(out_fmt == VIDEO_PALETTE_RGB32)
-				rgb++;
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			if(out_fmt == VIDEO_PALETTE_RGB32)
-				rgb++;
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		if(out_fmt == VIDEO_PALETTE_RGB32)
-			return 8;
-		return 6;
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-		y = *yuv++;
-		u = *(rgb+1-linesize);
-		y1 = *yuv;
-		v = *(rgb+3-linesize);
-		*rgb++ = y;
-		*rgb++ = u;
-		*rgb++ = y1;
-		*rgb = v;
-		return 4;
-	case VIDEO_PALETTE_UYVY:
-		u = *(rgb-linesize);
-		y = *yuv++;
-		v = *(rgb+2-linesize);
-		y1 = *yuv;
-		*rgb++ = u;
-		*rgb++ = y;
-		*rgb++ = v;
-		*rgb = y1;
-		return 4;
-	case VIDEO_PALETTE_GREY:
-		*rgb++ = *yuv++;
-		*rgb = *yuv;
-		return 2;
-	default:
-		DBG("Empty: %d\n", out_fmt);
-		return 0;
-	}
-}
-
-
-static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-		      int in_uyvy, int mmap_kludge)
-{
-	int y, u, v, r, g, b, y1;
-
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-	case VIDEO_PALETTE_RGB565:
-	case VIDEO_PALETTE_RGB24:
-	case VIDEO_PALETTE_RGB32:
-		if (in_uyvy) {
-			u = *yuv++ - 128;
-			y = (*yuv++ - 16) * 76310;
-			v = *yuv++ - 128;
-			y1 = (*yuv - 16) * 76310;
-		} else {
-			y = (*yuv++ - 16) * 76310;
-			u = *yuv++ - 128;
-			y1 = (*yuv++ - 16) * 76310;
-			v = *yuv - 128;
-		}
-		r = 104635 * v;
-		g = -25690 * u + -53294 * v;
-		b = 132278 * u;
-		break;
-	default:
-		y = *yuv++;
-		u = *yuv++;
-		y1 = *yuv++;
-		v = *yuv;
-		/* Just to avoid compiler warnings */
-		r = 0;
-		g = 0;
-		b = 0;
-		break;
-	}
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-		*rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3);
-		*rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6);
-		*rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3);
-		*rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6);
-		return 4;
-	case VIDEO_PALETTE_RGB565:
-		*rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3);
-		*rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5);
-		*rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3);
-		*rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5);
-		return 4;
-	case VIDEO_PALETTE_RGB24:
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		return 6;
-	case VIDEO_PALETTE_RGB32:
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			rgb++;
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			rgb++;
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		return 8;
-	case VIDEO_PALETTE_GREY:
-		*rgb++ = y;
-		*rgb = y1;
-		return 2;
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-		*rgb++ = y;
-		*rgb++ = u;
-		*rgb++ = y1;
-		*rgb = v;
-		return 4;
-	case VIDEO_PALETTE_UYVY:
-		*rgb++ = u;
-		*rgb++ = y;
-		*rgb++ = v;
-		*rgb = y1;
-		return 4;
-	default:
-		DBG("Empty: %d\n", out_fmt);
-		return 0;
-	}
-}
-
-static int skipcount(int count, int fmt)
-{
-	switch(fmt) {
-	case VIDEO_PALETTE_GREY:
-		return count;
-	case VIDEO_PALETTE_RGB555:
-	case VIDEO_PALETTE_RGB565:
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-	case VIDEO_PALETTE_UYVY:
-		return 2*count;
-	case VIDEO_PALETTE_RGB24:
-		return 3*count;
-	case VIDEO_PALETTE_RGB32:
-		return 4*count;
-	default:
-		return 0;
-	}
-}
-
-static int parse_picture(struct cam_data *cam, int size)
-{
-	u8 *obuf, *ibuf, *end_obuf;
-	int ll, in_uyvy, compressed, decimation, even_line, origsize, out_fmt;
-	int rows, cols, linesize, subsample_422;
-
-	/* make sure params don't change while we are decoding */
-	mutex_lock(&cam->param_lock);
-
-	obuf = cam->decompressed_frame.data;
-	end_obuf = obuf+CPIA_MAX_FRAME_SIZE;
-	ibuf = cam->raw_image;
-	origsize = size;
-	out_fmt = cam->vp.palette;
-
-	if ((ibuf[0] != MAGIC_0) || (ibuf[1] != MAGIC_1)) {
-		LOG("header not found\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-
-	if ((ibuf[16] != VIDEOSIZE_QCIF) && (ibuf[16] != VIDEOSIZE_CIF)) {
-		LOG("wrong video size\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-
-	if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) {
-		LOG("illegal subtype %d\n",ibuf[17]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	subsample_422 = ibuf[17] == SUBSAMPLE_422;
-
-	if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) {
-		LOG("illegal yuvorder %d\n",ibuf[18]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	in_uyvy = ibuf[18] == YUVORDER_UYVY;
-
-	if ((ibuf[24] != cam->params.roi.colStart) ||
-	    (ibuf[25] != cam->params.roi.colEnd) ||
-	    (ibuf[26] != cam->params.roi.rowStart) ||
-	    (ibuf[27] != cam->params.roi.rowEnd)) {
-		LOG("ROI mismatch\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	cols = 8*(ibuf[25] - ibuf[24]);
-	rows = 4*(ibuf[27] - ibuf[26]);
-
-
-	if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) {
-		LOG("illegal compression %d\n",ibuf[28]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	compressed = (ibuf[28] == COMPRESSED);
-
-	if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) {
-		LOG("illegal decimation %d\n",ibuf[29]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	decimation = (ibuf[29] == DECIMATION_ENAB);
-
-	cam->params.yuvThreshold.yThreshold = ibuf[30];
-	cam->params.yuvThreshold.uvThreshold = ibuf[31];
-	cam->params.status.systemState = ibuf[32];
-	cam->params.status.grabState = ibuf[33];
-	cam->params.status.streamState = ibuf[34];
-	cam->params.status.fatalError = ibuf[35];
-	cam->params.status.cmdError = ibuf[36];
-	cam->params.status.debugFlags = ibuf[37];
-	cam->params.status.vpStatus = ibuf[38];
-	cam->params.status.errorCode = ibuf[39];
-	cam->fps = ibuf[41];
-	mutex_unlock(&cam->param_lock);
-
-	linesize = skipcount(cols, out_fmt);
-	ibuf += FRAME_HEADER_SIZE;
-	size -= FRAME_HEADER_SIZE;
-	ll = ibuf[0] | (ibuf[1] << 8);
-	ibuf += 2;
-	even_line = 1;
-
-	while (size > 0) {
-		size -= (ll+2);
-		if (size < 0) {
-			LOG("Insufficient data in buffer\n");
-			return -1;
-		}
-
-		while (ll > 1) {
-			if (!compressed || (compressed && !(*ibuf & 1))) {
-				if(subsample_422 || even_line) {
-				obuf += yuvconvert(ibuf, obuf, out_fmt,
-						   in_uyvy, cam->mmap_kludge);
-				ibuf += 4;
-				ll -= 4;
-			} else {
-					/* SUBSAMPLE_420 on an odd line */
-					obuf += convert420(ibuf, obuf,
-							   out_fmt, linesize,
-							   cam->mmap_kludge);
-					ibuf += 2;
-					ll -= 2;
-				}
-			} else {
-				/*skip compressed interval from previous frame*/
-				obuf += skipcount(*ibuf >> 1, out_fmt);
-				if (obuf > end_obuf) {
-					LOG("Insufficient buffer size\n");
-					return -1;
-				}
-				++ibuf;
-				ll--;
-			}
-		}
-		if (ll == 1) {
-			if (*ibuf != EOL) {
-				DBG("EOL not found giving up after %d/%d"
-				    " bytes\n", origsize-size, origsize);
-				return -1;
-			}
-
-			++ibuf; /* skip over EOL */
-
-			if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) &&
-			   (ibuf[2] == EOI) && (ibuf[3] == EOI)) {
-				size -= 4;
-				break;
-			}
-
-			if(decimation) {
-				/* skip the odd lines for now */
-				obuf += linesize;
-			}
-
-			if (size > 1) {
-				ll = ibuf[0] | (ibuf[1] << 8);
-				ibuf += 2; /* skip over line length */
-			}
-			if(!decimation)
-				even_line = !even_line;
-		} else {
-			LOG("line length was not 1 but %d after %d/%d bytes\n",
-			    ll, origsize-size, origsize);
-			return -1;
-		}
-	}
-
-	if(decimation) {
-		/* interpolate odd rows */
-		int i, j;
-		u8 *prev, *next;
-		prev = cam->decompressed_frame.data;
-		obuf = prev+linesize;
-		next = obuf+linesize;
-		for(i=1; i<rows-1; i+=2) {
-			for(j=0; j<linesize; ++j) {
-				*obuf++ = ((int)*prev++ + *next++) / 2;
-			}
-			prev += linesize;
-			obuf += linesize;
-			next += linesize;
-		}
-		/* last row is odd, just copy previous row */
-		memcpy(obuf, prev, linesize);
-	}
-
-	cam->decompressed_frame.count = obuf-cam->decompressed_frame.data;
-
-	return cam->decompressed_frame.count;
-}
-
-/* InitStreamCap wrapper to select correct start line */
-static inline int init_stream_cap(struct cam_data *cam)
-{
-	return do_command(cam, CPIA_COMMAND_InitStreamCap,
-			  0, cam->params.streamStartLine, 0, 0);
-}
-
-
-/*  find_over_exposure
- *    Finds a suitable value of OverExposure for use with SetFlickerCtrl
- *    Some calculation is required because this value changes with the brightness
- *    set with SetColourParameters
- *
- *  Parameters: Brightness  -  last brightness value set with SetColourParameters
- *
- *  Returns: OverExposure value to use with SetFlickerCtrl
- */
-#define FLICKER_MAX_EXPOSURE                    250
-#define FLICKER_ALLOWABLE_OVER_EXPOSURE         146
-#define FLICKER_BRIGHTNESS_CONSTANT             59
-static int find_over_exposure(int brightness)
-{
-	int MaxAllowableOverExposure, OverExposure;
-
-	MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness -
-				   FLICKER_BRIGHTNESS_CONSTANT;
-
-	if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) {
-		OverExposure = MaxAllowableOverExposure;
-	} else {
-		OverExposure = FLICKER_ALLOWABLE_OVER_EXPOSURE;
-	}
-
-	return OverExposure;
-}
-#undef FLICKER_MAX_EXPOSURE
-#undef FLICKER_ALLOWABLE_OVER_EXPOSURE
-#undef FLICKER_BRIGHTNESS_CONSTANT
-
-/* update various camera modes and settings */
-static void dispatch_commands(struct cam_data *cam)
-{
-	mutex_lock(&cam->param_lock);
-	if (cam->cmd_queue==COMMAND_NONE) {
-		mutex_unlock(&cam->param_lock);
-		return;
-	}
-	DEB_BYTE(cam->cmd_queue);
-	DEB_BYTE(cam->cmd_queue>>8);
-	if (cam->cmd_queue & COMMAND_SETFORMAT) {
-		do_command(cam, CPIA_COMMAND_SetFormat,
-			   cam->params.format.videoSize,
-			   cam->params.format.subSample,
-			   cam->params.format.yuvOrder, 0);
-		do_command(cam, CPIA_COMMAND_SetROI,
-			   cam->params.roi.colStart, cam->params.roi.colEnd,
-			   cam->params.roi.rowStart, cam->params.roi.rowEnd);
-		cam->first_frame = 1;
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS)
-		do_command(cam, CPIA_COMMAND_SetColourParams,
-			   cam->params.colourParams.brightness,
-			   cam->params.colourParams.contrast,
-			   cam->params.colourParams.saturation, 0);
-
-	if (cam->cmd_queue & COMMAND_SETAPCOR)
-		do_command(cam, CPIA_COMMAND_SetApcor,
-			   cam->params.apcor.gain1,
-			   cam->params.apcor.gain2,
-			   cam->params.apcor.gain4,
-			   cam->params.apcor.gain8);
-
-	if (cam->cmd_queue & COMMAND_SETVLOFFSET)
-		do_command(cam, CPIA_COMMAND_SetVLOffset,
-			   cam->params.vlOffset.gain1,
-			   cam->params.vlOffset.gain2,
-			   cam->params.vlOffset.gain4,
-			   cam->params.vlOffset.gain8);
-
-	if (cam->cmd_queue & COMMAND_SETEXPOSURE) {
-		do_command_extended(cam, CPIA_COMMAND_SetExposure,
-				    cam->params.exposure.gainMode,
-				    1,
-				    cam->params.exposure.compMode,
-				    cam->params.exposure.centreWeight,
-				    cam->params.exposure.gain,
-				    cam->params.exposure.fineExp,
-				    cam->params.exposure.coarseExpLo,
-				    cam->params.exposure.coarseExpHi,
-				    cam->params.exposure.redComp,
-				    cam->params.exposure.green1Comp,
-				    cam->params.exposure.green2Comp,
-				    cam->params.exposure.blueComp);
-		if(cam->params.exposure.expMode != 1) {
-			do_command_extended(cam, CPIA_COMMAND_SetExposure,
-					    0,
-					    cam->params.exposure.expMode,
-					    0, 0,
-					    cam->params.exposure.gain,
-					    cam->params.exposure.fineExp,
-					    cam->params.exposure.coarseExpLo,
-					    cam->params.exposure.coarseExpHi,
-					    0, 0, 0, 0);
-		}
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) {
-		if (cam->params.colourBalance.balanceMode == 1) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   1,
-				   cam->params.colourBalance.redGain,
-				   cam->params.colourBalance.greenGain,
-				   cam->params.colourBalance.blueGain);
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   3, 0, 0, 0);
-		}
-		if (cam->params.colourBalance.balanceMode == 2) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   2, 0, 0, 0);
-		}
-		if (cam->params.colourBalance.balanceMode == 3) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   3, 0, 0, 0);
-		}
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET)
-		do_command(cam, CPIA_COMMAND_SetCompressionTarget,
-			   cam->params.compressionTarget.frTargeting,
-			   cam->params.compressionTarget.targetFR,
-			   cam->params.compressionTarget.targetQ, 0);
-
-	if (cam->cmd_queue & COMMAND_SETYUVTHRESH)
-		do_command(cam, CPIA_COMMAND_SetYUVThresh,
-			   cam->params.yuvThreshold.yThreshold,
-			   cam->params.yuvThreshold.uvThreshold, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS)
-		do_command_extended(cam, CPIA_COMMAND_SetCompressionParams,
-			    0, 0, 0, 0,
-			    cam->params.compressionParams.hysteresis,
-			    cam->params.compressionParams.threshMax,
-			    cam->params.compressionParams.smallStep,
-			    cam->params.compressionParams.largeStep,
-			    cam->params.compressionParams.decimationHysteresis,
-			    cam->params.compressionParams.frDiffStepThresh,
-			    cam->params.compressionParams.qDiffStepThresh,
-			    cam->params.compressionParams.decimationThreshMod);
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSION)
-		do_command(cam, CPIA_COMMAND_SetCompression,
-			   cam->params.compression.mode,
-			   cam->params.compression.decimation, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETSENSORFPS)
-		do_command(cam, CPIA_COMMAND_SetSensorFPS,
-			   cam->params.sensorFps.divisor,
-			   cam->params.sensorFps.baserate, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETFLICKERCTRL)
-		do_command(cam, CPIA_COMMAND_SetFlickerCtrl,
-			   cam->params.flickerControl.flickerMode,
-			   cam->params.flickerControl.coarseJump,
-			   abs(cam->params.flickerControl.allowableOverExposure),
-			   0);
-
-	if (cam->cmd_queue & COMMAND_SETECPTIMING)
-		do_command(cam, CPIA_COMMAND_SetECPTiming,
-			   cam->params.ecpTiming, 0, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_PAUSE)
-		do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_RESUME)
-		init_stream_cap(cam);
-
-	if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected)
-	  {
-	    int p1 = (cam->params.qx3.bottomlight == 0) << 1;
-	    int p2 = (cam->params.qx3.toplight == 0) << 3;
-	    do_command(cam, CPIA_COMMAND_WriteVCReg,  0x90, 0x8F, 0x50, 0);
-	    do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
-	  }
-
-	cam->cmd_queue = COMMAND_NONE;
-	mutex_unlock(&cam->param_lock);
-	return;
-}
-
-
-
-static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-			int on)
-{
-	/* Everything in here is from the Windows driver */
-#define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \
-			       params->version.firmwareRevision == (y))
-/* define for compgain calculation */
-#if 0
-#define COMPGAIN(base, curexp, newexp) \
-    (u8) ((((float) base - 128.0) * ((float) curexp / (float) newexp)) + 128.5)
-#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
-    (u16)((float)curexp * (float)(u8)(curcomp + 128) / (float)(u8)(basecomp - 128))
-#else
-  /* equivalent functions without floating point math */
-#define COMPGAIN(base, curexp, newexp) \
-    (u8)(128 + (((u32)(2*(base-128)*curexp + newexp)) / (2* newexp)) )
-#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
-     (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128)))
-#endif
-
-
-	int currentexp = params->exposure.coarseExpLo +
-			 params->exposure.coarseExpHi*256;
-	int startexp;
-	if (on) {
-		int cj = params->flickerControl.coarseJump;
-		params->flickerControl.flickerMode = 1;
-		params->flickerControl.disabled = 0;
-		if(params->exposure.expMode != 2)
-			*command_flags |= COMMAND_SETEXPOSURE;
-		params->exposure.expMode = 2;
-		currentexp = currentexp << params->exposure.gain;
-		params->exposure.gain = 0;
-		/* round down current exposure to nearest value */
-		startexp = (currentexp + ROUND_UP_EXP_FOR_FLICKER) / cj;
-		if(startexp < 1)
-			startexp = 1;
-		startexp = (startexp * cj) - 1;
-		if(FIRMWARE_VERSION(1,2))
-			while(startexp > MAX_EXP_102)
-				startexp -= cj;
-		else
-			while(startexp > MAX_EXP)
-				startexp -= cj;
-		params->exposure.coarseExpLo = startexp & 0xff;
-		params->exposure.coarseExpHi = startexp >> 8;
-		if (currentexp > startexp) {
-			if (currentexp > (2 * startexp))
-				currentexp = 2 * startexp;
-			params->exposure.redComp = COMPGAIN (COMP_RED, currentexp, startexp);
-			params->exposure.green1Comp = COMPGAIN (COMP_GREEN1, currentexp, startexp);
-			params->exposure.green2Comp = COMPGAIN (COMP_GREEN2, currentexp, startexp);
-			params->exposure.blueComp = COMPGAIN (COMP_BLUE, currentexp, startexp);
-		} else {
-			params->exposure.redComp = COMP_RED;
-			params->exposure.green1Comp = COMP_GREEN1;
-			params->exposure.green2Comp = COMP_GREEN2;
-			params->exposure.blueComp = COMP_BLUE;
-		}
-		if(FIRMWARE_VERSION(1,2))
-			params->exposure.compMode = 0;
-		else
-			params->exposure.compMode = 1;
-
-		params->apcor.gain1 = 0x18;
-		params->apcor.gain2 = 0x18;
-		params->apcor.gain4 = 0x16;
-		params->apcor.gain8 = 0x14;
-		*command_flags |= COMMAND_SETAPCOR;
-	} else {
-		params->flickerControl.flickerMode = 0;
-		params->flickerControl.disabled = 1;
-		/* Coarse = average of equivalent coarse for each comp channel */
-		startexp = EXP_FROM_COMP(COMP_RED, params->exposure.redComp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_GREEN1, params->exposure.green1Comp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_GREEN2, params->exposure.green2Comp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_BLUE, params->exposure.blueComp, currentexp);
-		startexp = startexp >> 2;
-		while(startexp > MAX_EXP &&
-		      params->exposure.gain < params->exposure.gainMode-1) {
-			startexp = startexp >> 1;
-			++params->exposure.gain;
-		}
-		if(FIRMWARE_VERSION(1,2) && startexp > MAX_EXP_102)
-			startexp = MAX_EXP_102;
-		if(startexp > MAX_EXP)
-			startexp = MAX_EXP;
-		params->exposure.coarseExpLo = startexp&0xff;
-		params->exposure.coarseExpHi = startexp >> 8;
-		params->exposure.redComp = COMP_RED;
-		params->exposure.green1Comp = COMP_GREEN1;
-		params->exposure.green2Comp = COMP_GREEN2;
-		params->exposure.blueComp = COMP_BLUE;
-		params->exposure.compMode = 1;
-		*command_flags |= COMMAND_SETEXPOSURE;
-		params->apcor.gain1 = 0x18;
-		params->apcor.gain2 = 0x16;
-		params->apcor.gain4 = 0x24;
-		params->apcor.gain8 = 0x34;
-		*command_flags |= COMMAND_SETAPCOR;
-	}
-	params->vlOffset.gain1 = 20;
-	params->vlOffset.gain2 = 24;
-	params->vlOffset.gain4 = 26;
-	params->vlOffset.gain8 = 26;
-	*command_flags |= COMMAND_SETVLOFFSET;
-#undef FIRMWARE_VERSION
-#undef EXP_FROM_COMP
-#undef COMPGAIN
-}
-
-#define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \
-			       cam->params.version.firmwareRevision == (y))
-/* monitor the exposure and adjust the sensor frame rate if needed */
-static void monitor_exposure(struct cam_data *cam)
-{
-	u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8];
-	int retval, light_exp, dark_exp, very_dark_exp;
-	int old_exposure, new_exposure, framerate;
-
-	/* get necessary stats and register settings from camera */
-	/* do_command can't handle this, so do it ourselves */
-	cmd[0] = CPIA_COMMAND_ReadVPRegs>>8;
-	cmd[1] = CPIA_COMMAND_ReadVPRegs&0xff;
-	cmd[2] = 30;
-	cmd[3] = 4;
-	cmd[4] = 9;
-	cmd[5] = 8;
-	cmd[6] = 8;
-	cmd[7] = 0;
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval) {
-		LOG("ReadVPRegs(30,4,9,8) - failed, retval=%d\n",
-		    retval);
-		return;
-	}
-	exp_acc = data[0];
-	bcomp = data[1];
-	gain = data[2];
-	coarseL = data[3];
-
-	mutex_lock(&cam->param_lock);
-	light_exp = cam->params.colourParams.brightness +
-		    TC - 50 + EXP_ACC_LIGHT;
-	if(light_exp > 255)
-		light_exp = 255;
-	dark_exp = cam->params.colourParams.brightness +
-		   TC - 50 - EXP_ACC_DARK;
-	if(dark_exp < 0)
-		dark_exp = 0;
-	very_dark_exp = dark_exp/2;
-
-	old_exposure = cam->params.exposure.coarseExpHi * 256 +
-		       cam->params.exposure.coarseExpLo;
-
-	if(!cam->params.flickerControl.disabled) {
-		/* Flicker control on */
-		int max_comp = FIRMWARE_VERSION(1,2) ? MAX_COMP : HIGH_COMP_102;
-		bcomp += 128;	/* decode */
-		if(bcomp >= max_comp && exp_acc < dark_exp) {
-			/* dark */
-			if(exp_acc < very_dark_exp) {
-				/* very dark */
-				if(cam->exposure_status == EXPOSURE_VERY_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_DARK;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just dark */
-				if(cam->exposure_status == EXPOSURE_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_DARK;
-					cam->exposure_count = 1;
-				}
-			}
-		} else if(old_exposure <= LOW_EXP || exp_acc > light_exp) {
-			/* light */
-			if(old_exposure <= VERY_LOW_EXP) {
-				/* very light */
-				if(cam->exposure_status == EXPOSURE_VERY_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_LIGHT;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just light */
-				if(cam->exposure_status == EXPOSURE_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_LIGHT;
-					cam->exposure_count = 1;
-				}
-			}
-		} else {
-			/* not dark or light */
-			cam->exposure_status = EXPOSURE_NORMAL;
-		}
-	} else {
-		/* Flicker control off */
-		if(old_exposure >= MAX_EXP && exp_acc < dark_exp) {
-			/* dark */
-			if(exp_acc < very_dark_exp) {
-				/* very dark */
-				if(cam->exposure_status == EXPOSURE_VERY_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_DARK;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just dark */
-				if(cam->exposure_status == EXPOSURE_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_DARK;
-					cam->exposure_count = 1;
-				}
-			}
-		} else if(old_exposure <= LOW_EXP || exp_acc > light_exp) {
-			/* light */
-			if(old_exposure <= VERY_LOW_EXP) {
-				/* very light */
-				if(cam->exposure_status == EXPOSURE_VERY_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_LIGHT;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just light */
-				if(cam->exposure_status == EXPOSURE_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_LIGHT;
-					cam->exposure_count = 1;
-				}
-			}
-		} else {
-			/* not dark or light */
-			cam->exposure_status = EXPOSURE_NORMAL;
-		}
-	}
-
-	framerate = cam->fps;
-	if(framerate > 30 || framerate < 1)
-		framerate = 1;
-
-	if(!cam->params.flickerControl.disabled) {
-		/* Flicker control on */
-		if((cam->exposure_status == EXPOSURE_VERY_DARK ||
-		    cam->exposure_status == EXPOSURE_DARK) &&
-		   cam->exposure_count >= DARK_TIME*framerate &&
-		   cam->params.sensorFps.divisor < 3) {
-
-			/* dark for too long */
-			++cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			cam->params.flickerControl.coarseJump =
-				flicker_jumps[cam->mainsFreq]
-					     [cam->params.sensorFps.baserate]
-					     [cam->params.sensorFps.divisor];
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-			new_exposure = cam->params.flickerControl.coarseJump-1;
-			while(new_exposure < old_exposure/2)
-				new_exposure += cam->params.flickerControl.coarseJump;
-			cam->params.exposure.coarseExpLo = new_exposure & 0xff;
-			cam->params.exposure.coarseExpHi = new_exposure >> 8;
-			cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically decreasing sensor_fps\n");
-
-		} else if((cam->exposure_status == EXPOSURE_VERY_LIGHT ||
-		    cam->exposure_status == EXPOSURE_LIGHT) &&
-		   cam->exposure_count >= LIGHT_TIME*framerate &&
-		   cam->params.sensorFps.divisor > 0) {
-
-			/* light for too long */
-			int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ;
-
-			--cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			cam->params.flickerControl.coarseJump =
-				flicker_jumps[cam->mainsFreq]
-					     [cam->params.sensorFps.baserate]
-					     [cam->params.sensorFps.divisor];
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-			new_exposure = cam->params.flickerControl.coarseJump-1;
-			while(new_exposure < 2*old_exposure &&
-			      new_exposure+
-			      cam->params.flickerControl.coarseJump < max_exp)
-				new_exposure += cam->params.flickerControl.coarseJump;
-			cam->params.exposure.coarseExpLo = new_exposure & 0xff;
-			cam->params.exposure.coarseExpHi = new_exposure >> 8;
-			cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically increasing sensor_fps\n");
-		}
-	} else {
-		/* Flicker control off */
-		if((cam->exposure_status == EXPOSURE_VERY_DARK ||
-		    cam->exposure_status == EXPOSURE_DARK) &&
-		   cam->exposure_count >= DARK_TIME*framerate &&
-		   cam->params.sensorFps.divisor < 3) {
-
-			/* dark for too long */
-			++cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			if(cam->params.exposure.gain > 0) {
-				--cam->params.exposure.gain;
-				cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			}
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically decreasing sensor_fps\n");
-
-		} else if((cam->exposure_status == EXPOSURE_VERY_LIGHT ||
-		    cam->exposure_status == EXPOSURE_LIGHT) &&
-		   cam->exposure_count >= LIGHT_TIME*framerate &&
-		   cam->params.sensorFps.divisor > 0) {
-
-			/* light for too long */
-			--cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			if(cam->params.exposure.gain <
-			   cam->params.exposure.gainMode-1) {
-				++cam->params.exposure.gain;
-				cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			}
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically increasing sensor_fps\n");
-		}
-	}
-	mutex_unlock(&cam->param_lock);
-}
-
-/*-----------------------------------------------------------------*/
-/* if flicker is switched off, this function switches it back on.It checks,
-   however, that conditions are suitable before restarting it.
-   This should only be called for firmware version 1.2.
-
-   It also adjust the colour balance when an exposure step is detected - as
-   long as flicker is running
-*/
-static void restart_flicker(struct cam_data *cam)
-{
-	int cam_exposure, old_exp;
-	if(!FIRMWARE_VERSION(1,2))
-		return;
-	mutex_lock(&cam->param_lock);
-	if(cam->params.flickerControl.flickerMode == 0 ||
-	   cam->raw_image[39] == 0) {
-		mutex_unlock(&cam->param_lock);
-		return;
-	}
-	cam_exposure = cam->raw_image[39]*2;
-	old_exp = cam->params.exposure.coarseExpLo +
-		  cam->params.exposure.coarseExpHi*256;
-	/*
-	  see how far away camera exposure is from a valid
-	  flicker exposure value
-	*/
-	cam_exposure %= cam->params.flickerControl.coarseJump;
-	if(!cam->params.flickerControl.disabled &&
-	   cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
-		/* Flicker control auto-disabled */
-		cam->params.flickerControl.disabled = 1;
-	}
-
-	if(cam->params.flickerControl.disabled &&
-	   cam->params.flickerControl.flickerMode &&
-	   old_exp > cam->params.flickerControl.coarseJump +
-		     ROUND_UP_EXP_FOR_FLICKER) {
-		/* exposure is now high enough to switch
-		   flicker control back on */
-		set_flicker(&cam->params, &cam->cmd_queue, 1);
-		if((cam->cmd_queue & COMMAND_SETEXPOSURE) &&
-		   cam->params.exposure.expMode == 2)
-			cam->exposure_status = EXPOSURE_NORMAL;
-
-	}
-	mutex_unlock(&cam->param_lock);
-}
-#undef FIRMWARE_VERSION
-
-static int clear_stall(struct cam_data *cam)
-{
-	/* FIXME: Does this actually work? */
-	LOG("Clearing stall\n");
-
-	cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0);
-	do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
-	return cam->params.status.streamState != STREAM_PAUSED;
-}
-
-/* kernel thread function to read image from camera */
-static int fetch_frame(void *data)
-{
-	int image_size, retry;
-	struct cam_data *cam = (struct cam_data *)data;
-	unsigned long oldjif, rate, diff;
-
-	/* Allow up to two bad images in a row to be read and
-	 * ignored before an error is reported */
-	for (retry = 0; retry < 3; ++retry) {
-		if (retry)
-			DBG("retry=%d\n", retry);
-
-		if (!cam->ops)
-			continue;
-
-		/* load first frame always uncompressed */
-		if (cam->first_frame &&
-		    cam->params.compression.mode != CPIA_COMPRESSION_NONE) {
-			do_command(cam, CPIA_COMMAND_SetCompression,
-				   CPIA_COMPRESSION_NONE,
-				   NO_DECIMATION, 0, 0);
-			/* Trial & error - Discarding a frame prevents the
-			   first frame from having an error in the data. */
-			do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0);
-		}
-
-		/* init camera upload */
-		if (do_command(cam, CPIA_COMMAND_GrabFrame, 0,
-			       cam->params.streamStartLine, 0, 0))
-			continue;
-
-		if (cam->ops->wait_for_stream_ready) {
-			/* loop until image ready */
-			int count = 0;
-			do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
-			while (cam->params.status.streamState != STREAM_READY) {
-				if(++count > READY_TIMEOUT)
-					break;
-				if(cam->params.status.streamState ==
-				   STREAM_PAUSED) {
-					/* Bad news */
-					if(!clear_stall(cam))
-						return -EIO;
-				}
-
-				cond_resched();
-
-				/* sleep for 10 ms, hopefully ;) */
-				msleep_interruptible(10);
-				if (signal_pending(current))
-					return -EINTR;
-
-				do_command(cam, CPIA_COMMAND_GetCameraStatus,
-					   0, 0, 0, 0);
-			}
-			if(cam->params.status.streamState != STREAM_READY) {
-				continue;
-			}
-		}
-
-		cond_resched();
-
-		/* grab image from camera */
-		oldjif = jiffies;
-		image_size = cam->ops->streamRead(cam->lowlevel_data,
-						  cam->raw_image, 0);
-		if (image_size <= 0) {
-			DBG("streamRead failed: %d\n", image_size);
-			continue;
-		}
-
-		rate = image_size * HZ / 1024;
-		diff = jiffies-oldjif;
-		cam->transfer_rate = diff==0 ? rate : rate/diff;
-			/* diff==0 ? unlikely but possible */
-
-		/* Switch flicker control back on if it got turned off */
-		restart_flicker(cam);
-
-		/* If AEC is enabled, monitor the exposure and
-		   adjust the sensor frame rate if needed */
-		if(cam->params.exposure.expMode == 2)
-			monitor_exposure(cam);
-
-		/* camera idle now so dispatch queued commands */
-		dispatch_commands(cam);
-
-		/* Update our knowledge of the camera state */
-		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
-		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
-		do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0);
-
-		/* decompress and convert image to by copying it from
-		 * raw_image to decompressed_frame
-		 */
-
-		cond_resched();
-
-		cam->image_size = parse_picture(cam, image_size);
-		if (cam->image_size <= 0) {
-			DBG("parse_picture failed %d\n", cam->image_size);
-			if(cam->params.compression.mode !=
-			   CPIA_COMPRESSION_NONE) {
-				/* Compression may not work right if we
-				   had a bad frame, get the next one
-				   uncompressed. */
-				cam->first_frame = 1;
-				do_command(cam, CPIA_COMMAND_SetGrabMode,
-					   CPIA_GRAB_SINGLE, 0, 0, 0);
-				/* FIXME: Trial & error - need up to 70ms for
-				   the grab mode change to complete ? */
-				msleep_interruptible(70);
-				if (signal_pending(current))
-					return -EINTR;
-			}
-		} else
-			break;
-	}
-
-	if (retry < 3) {
-		/* FIXME: this only works for double buffering */
-		if (cam->frame[cam->curframe].state == FRAME_READY) {
-			memcpy(cam->frame[cam->curframe].data,
-			       cam->decompressed_frame.data,
-			       cam->decompressed_frame.count);
-			cam->frame[cam->curframe].state = FRAME_DONE;
-		} else
-			cam->decompressed_frame.state = FRAME_DONE;
-
-		if (cam->first_frame) {
-			cam->first_frame = 0;
-			do_command(cam, CPIA_COMMAND_SetCompression,
-				   cam->params.compression.mode,
-				   cam->params.compression.decimation, 0, 0);
-
-			/* Switch from single-grab to continuous grab */
-			do_command(cam, CPIA_COMMAND_SetGrabMode,
-				   CPIA_GRAB_CONTINUOUS, 0, 0, 0);
-		}
-		return 0;
-	}
-	return -EIO;
-}
-
-static int capture_frame(struct cam_data *cam, struct video_mmap *vm)
-{
-	if (!cam->frame_buf) {
-		/* we do lazy allocation */
-		int err;
-		if ((err = allocate_frame_buf(cam)))
-			return err;
-	}
-
-	cam->curframe = vm->frame;
-	cam->frame[cam->curframe].state = FRAME_READY;
-	return fetch_frame(cam);
-}
-
-static int goto_high_power(struct cam_data *cam)
-{
-	if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0))
-		return -EIO;
-	msleep_interruptible(40);	/* windows driver does it too */
-	if(signal_pending(current))
-		return -EINTR;
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -EIO;
-	if (cam->params.status.systemState == HI_POWER_STATE) {
-		DBG("camera now in HIGH power state\n");
-		return 0;
-	}
-	printstatus(cam);
-	return -EIO;
-}
-
-static int goto_low_power(struct cam_data *cam)
-{
-	if (do_command(cam, CPIA_COMMAND_GotoLoPower, 0, 0, 0, 0))
-		return -1;
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -1;
-	if (cam->params.status.systemState == LO_POWER_STATE) {
-		DBG("camera now in LOW power state\n");
-		return 0;
-	}
-	printstatus(cam);
-	return -1;
-}
-
-static void save_camera_state(struct cam_data *cam)
-{
-	if(!(cam->cmd_queue & COMMAND_SETCOLOURBALANCE))
-		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
-	if(!(cam->cmd_queue & COMMAND_SETEXPOSURE))
-		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
-
-	DBG("%d/%d/%d/%d/%d/%d/%d/%d\n",
-	     cam->params.exposure.gain,
-	     cam->params.exposure.fineExp,
-	     cam->params.exposure.coarseExpLo,
-	     cam->params.exposure.coarseExpHi,
-	     cam->params.exposure.redComp,
-	     cam->params.exposure.green1Comp,
-	     cam->params.exposure.green2Comp,
-	     cam->params.exposure.blueComp);
-	DBG("%d/%d/%d\n",
-	     cam->params.colourBalance.redGain,
-	     cam->params.colourBalance.greenGain,
-	     cam->params.colourBalance.blueGain);
-}
-
-static int set_camera_state(struct cam_data *cam)
-{
-	cam->cmd_queue = COMMAND_SETCOMPRESSION |
-			 COMMAND_SETCOMPRESSIONTARGET |
-			 COMMAND_SETCOLOURPARAMS |
-			 COMMAND_SETFORMAT |
-			 COMMAND_SETYUVTHRESH |
-			 COMMAND_SETECPTIMING |
-			 COMMAND_SETCOMPRESSIONPARAMS |
-			 COMMAND_SETEXPOSURE |
-			 COMMAND_SETCOLOURBALANCE |
-			 COMMAND_SETSENSORFPS |
-			 COMMAND_SETAPCOR |
-			 COMMAND_SETFLICKERCTRL |
-			 COMMAND_SETVLOFFSET;
-
-	do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0);
-	dispatch_commands(cam);
-
-	/* Wait 6 frames for the sensor to get all settings and
-	   AEC/ACB to settle */
-	msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) *
-			       (1 << cam->params.sensorFps.divisor) + 10);
-
-	if(signal_pending(current))
-		return -EINTR;
-
-	save_camera_state(cam);
-
-	return 0;
-}
-
-static void get_version_information(struct cam_data *cam)
-{
-	/* GetCPIAVersion */
-	do_command(cam, CPIA_COMMAND_GetCPIAVersion, 0, 0, 0, 0);
-
-	/* GetPnPID */
-	do_command(cam, CPIA_COMMAND_GetPnPID, 0, 0, 0, 0);
-}
-
-/* initialize camera */
-static int reset_camera(struct cam_data *cam)
-{
-	int err;
-	/* Start the camera in low power mode */
-	if (goto_low_power(cam)) {
-		if (cam->params.status.systemState != WARM_BOOT_STATE)
-			return -ENODEV;
-
-		/* FIXME: this is just dirty trial and error */
-		err = goto_high_power(cam);
-		if(err)
-			return err;
-		do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0);
-		if (goto_low_power(cam))
-			return -ENODEV;
-	}
-
-	/* procedure described in developer's guide p3-28 */
-
-	/* Check the firmware version. */
-	cam->params.version.firmwareVersion = 0;
-	get_version_information(cam);
-	if (cam->params.version.firmwareVersion != 1)
-		return -ENODEV;
-
-	/* A bug in firmware 1-02 limits gainMode to 2 */
-	if(cam->params.version.firmwareRevision <= 2 &&
-	   cam->params.exposure.gainMode > 2) {
-		cam->params.exposure.gainMode = 2;
-	}
-
-	/* set QX3 detected flag */
-	cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 &&
-					cam->params.pnpID.product == 0x0001);
-
-	/* The fatal error checking should be done after
-	 * the camera powers up (developer's guide p 3-38) */
-
-	/* Set streamState before transition to high power to avoid bug
-	 * in firmware 1-02 */
-	do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0,
-		   STREAM_NOT_READY, 0);
-
-	/* GotoHiPower */
-	err = goto_high_power(cam);
-	if (err)
-		return err;
-
-	/* Check the camera status */
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -EIO;
-
-	if (cam->params.status.fatalError) {
-		DBG("fatal_error:              %#04x\n",
-		    cam->params.status.fatalError);
-		DBG("vp_status:                %#04x\n",
-		    cam->params.status.vpStatus);
-		if (cam->params.status.fatalError & ~(COM_FLAG|CPIA_FLAG)) {
-			/* Fatal error in camera */
-			return -EIO;
-		} else if (cam->params.status.fatalError & (COM_FLAG|CPIA_FLAG)) {
-			/* Firmware 1-02 may do this for parallel port cameras,
-			 * just clear the flags (developer's guide p 3-38) */
-			do_command(cam, CPIA_COMMAND_ModifyCameraStatus,
-				   FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
-		}
-	}
-
-	/* Check the camera status again */
-	if (cam->params.status.fatalError) {
-		if (cam->params.status.fatalError)
-			return -EIO;
-	}
-
-	/* VPVersion can't be retrieved before the camera is in HiPower,
-	 * so get it here instead of in get_version_information. */
-	do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0);
-
-	/* set camera to a known state */
-	return set_camera_state(cam);
-}
-
-static void put_cam(struct cpia_camera_ops* ops)
-{
-	module_put(ops->owner);
-}
-
-/* ------------------------- V4L interface --------------------- */
-static int cpia_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct cam_data *cam = video_get_drvdata(dev);
-	int err;
-
-	if (!cam) {
-		DBG("Internal error, cam_data not found!\n");
-		return -ENODEV;
-	}
-
-	if (cam->open_count > 0) {
-		DBG("Camera already open\n");
-		return -EBUSY;
-	}
-
-	if (!try_module_get(cam->ops->owner))
-		return -ENODEV;
-
-	mutex_lock(&cam->busy_lock);
-	err = -ENOMEM;
-	if (!cam->raw_image) {
-		cam->raw_image = rvmalloc(CPIA_MAX_IMAGE_SIZE);
-		if (!cam->raw_image)
-			goto oops;
-	}
-
-	if (!cam->decompressed_frame.data) {
-		cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE);
-		if (!cam->decompressed_frame.data)
-			goto oops;
-	}
-
-	/* open cpia */
-	err = -ENODEV;
-	if (cam->ops->open(cam->lowlevel_data))
-		goto oops;
-
-	/* reset the camera */
-	if ((err = reset_camera(cam)) != 0) {
-		cam->ops->close(cam->lowlevel_data);
-		goto oops;
-	}
-
-	/* Set ownership of /proc/cpia/videoX to current user */
-	if(cam->proc_entry)
-		cam->proc_entry->uid = current_euid();
-
-	/* set mark for loading first frame uncompressed */
-	cam->first_frame = 1;
-
-	/* init it to something */
-	cam->mmap_kludge = 0;
-
-	++cam->open_count;
-	file->private_data = dev;
-	mutex_unlock(&cam->busy_lock);
-	return 0;
-
- oops:
-	if (cam->decompressed_frame.data) {
-		rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE);
-		cam->decompressed_frame.data = NULL;
-	}
-	if (cam->raw_image) {
-		rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE);
-		cam->raw_image = NULL;
-	}
-	mutex_unlock(&cam->busy_lock);
-	put_cam(cam->ops);
-	return err;
-}
-
-static int cpia_close(struct file *file)
-{
-	struct  video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-
-	if (cam->ops) {
-		/* Return ownership of /proc/cpia/videoX to root */
-		if(cam->proc_entry)
-			cam->proc_entry->uid = 0;
-
-		/* save camera state for later open (developers guide ch 3.5.3) */
-		save_camera_state(cam);
-
-		/* GotoLoPower */
-		goto_low_power(cam);
-
-		/* Update the camera status */
-		do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
-
-		/* cleanup internal state stuff */
-		free_frames(cam->frame);
-
-		/* close cpia */
-		cam->ops->close(cam->lowlevel_data);
-
-		put_cam(cam->ops);
-	}
-
-	if (--cam->open_count == 0) {
-		/* clean up capture-buffers */
-		if (cam->raw_image) {
-			rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE);
-			cam->raw_image = NULL;
-		}
-
-		if (cam->decompressed_frame.data) {
-			rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE);
-			cam->decompressed_frame.data = NULL;
-		}
-
-		if (cam->frame_buf)
-			free_frame_buf(cam);
-
-		if (!cam->ops)
-			kfree(cam);
-	}
-	file->private_data = NULL;
-
-	return 0;
-}
-
-static ssize_t cpia_read(struct file *file, char __user *buf,
-			 size_t count, loff_t *ppos)
-{
-	struct video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int err;
-
-	/* make this _really_ smp and multithread-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	if (!buf) {
-		DBG("buf NULL\n");
-		mutex_unlock(&cam->busy_lock);
-		return -EINVAL;
-	}
-
-	if (!count) {
-		DBG("count 0\n");
-		mutex_unlock(&cam->busy_lock);
-		return 0;
-	}
-
-	if (!cam->ops) {
-		DBG("ops NULL\n");
-		mutex_unlock(&cam->busy_lock);
-		return -ENODEV;
-	}
-
-	/* upload frame */
-	cam->decompressed_frame.state = FRAME_READY;
-	cam->mmap_kludge=0;
-	if((err = fetch_frame(cam)) != 0) {
-		DBG("ERROR from fetch_frame: %d\n", err);
-		mutex_unlock(&cam->busy_lock);
-		return err;
-	}
-	cam->decompressed_frame.state = FRAME_UNUSED;
-
-	/* copy data to user space */
-	if (cam->decompressed_frame.count > count) {
-		DBG("count wrong: %d, %lu\n", cam->decompressed_frame.count,
-		    (unsigned long) count);
-		mutex_unlock(&cam->busy_lock);
-		return -EFAULT;
-	}
-	if (copy_to_user(buf, cam->decompressed_frame.data,
-			cam->decompressed_frame.count)) {
-		DBG("copy_to_user failed\n");
-		mutex_unlock(&cam->busy_lock);
-		return -EFAULT;
-	}
-
-	mutex_unlock(&cam->busy_lock);
-	return cam->decompressed_frame.count;
-}
-
-static long cpia_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int retval = 0;
-
-	if (!cam || !cam->ops)
-		return -ENODEV;
-
-	/* make this _really_ smp-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	/* DBG("cpia_ioctl: %u\n", cmd); */
-
-	switch (cmd) {
-	/* query capabilities */
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-
-		DBG("VIDIOCGCAP\n");
-		strcpy(b->name, "CPiA Camera");
-		b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = 352;	/* VIDEOSIZE_CIF */
-		b->maxheight = 288;
-		b->minwidth = 48;	/* VIDEOSIZE_48_48 */
-		b->minheight = 48;
-		break;
-	}
-
-	/* get/set video source - we are a camera and nothing else */
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		DBG("VIDIOCGCHAN\n");
-		if (v->channel != 0) {
-			retval = -EINVAL;
-			break;
-		}
-
-		v->channel = 0;
-		strcpy(v->name, "Camera");
-		v->tuners = 0;
-		v->flags = 0;
-		v->type = VIDEO_TYPE_CAMERA;
-		v->norm = 0;
-		break;
-	}
-
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-
-		DBG("VIDIOCSCHAN\n");
-		if (v->channel != 0)
-			retval = -EINVAL;
-		break;
-	}
-
-	/* image properties */
-	case VIDIOCGPICT:
-	{
-		struct video_picture *pic = arg;
-		DBG("VIDIOCGPICT\n");
-		*pic = cam->vp;
-		break;
-	}
-
-	case VIDIOCSPICT:
-	{
-		struct video_picture *vp = arg;
-
-		DBG("VIDIOCSPICT\n");
-
-		/* check validity */
-		DBG("palette: %d\n", vp->palette);
-		DBG("depth: %d\n", vp->depth);
-		if (!valid_mode(vp->palette, vp->depth)) {
-			retval = -EINVAL;
-			break;
-		}
-
-		mutex_lock(&cam->param_lock);
-		/* brightness, colour, contrast need no check 0-65535 */
-		cam->vp = *vp;
-		/* update cam->params.colourParams */
-		cam->params.colourParams.brightness = vp->brightness*100/65535;
-		cam->params.colourParams.contrast = vp->contrast*100/65535;
-		cam->params.colourParams.saturation = vp->colour*100/65535;
-		/* contrast is in steps of 8, so round */
-		cam->params.colourParams.contrast =
-			((cam->params.colourParams.contrast + 3) / 8) * 8;
-		if (cam->params.version.firmwareVersion == 1 &&
-		    cam->params.version.firmwareRevision == 2 &&
-		    cam->params.colourParams.contrast > 80) {
-			/* 1-02 firmware limits contrast to 80 */
-			cam->params.colourParams.contrast = 80;
-		}
-
-		/* Adjust flicker control if necessary */
-		if(cam->params.flickerControl.allowableOverExposure < 0)
-			cam->params.flickerControl.allowableOverExposure =
-				-find_over_exposure(cam->params.colourParams.brightness);
-		if(cam->params.flickerControl.flickerMode != 0)
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-
-		/* queue command to update camera */
-		cam->cmd_queue |= COMMAND_SETCOLOURPARAMS;
-		mutex_unlock(&cam->param_lock);
-		DBG("VIDIOCSPICT: %d / %d // %d / %d / %d / %d\n",
-		    vp->depth, vp->palette, vp->brightness, vp->hue, vp->colour,
-		    vp->contrast);
-		break;
-	}
-
-	/* get/set capture window */
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-		DBG("VIDIOCGWIN\n");
-
-		*vw = cam->vw;
-		break;
-	}
-
-	case VIDIOCSWIN:
-	{
-		/* copy_from_user, check validity, copy to internal structure */
-		struct video_window *vw = arg;
-		DBG("VIDIOCSWIN\n");
-
-		if (vw->clipcount != 0) {    /* clipping not supported */
-			retval = -EINVAL;
-			break;
-		}
-		if (vw->clips != NULL) {     /* clipping not supported */
-			retval = -EINVAL;
-			break;
-		}
-
-		/* we set the video window to something smaller or equal to what
-		* is requested by the user???
-		*/
-		mutex_lock(&cam->param_lock);
-		if (vw->width != cam->vw.width || vw->height != cam->vw.height) {
-			int video_size = match_videosize(vw->width, vw->height);
-
-			if (video_size < 0) {
-				retval = -EINVAL;
-				mutex_unlock(&cam->param_lock);
-				break;
-			}
-			cam->video_size = video_size;
-
-			/* video size is changing, reset the subcapture area */
-			memset(&cam->vc, 0, sizeof(cam->vc));
-
-			set_vw_size(cam);
-			DBG("%d / %d\n", cam->vw.width, cam->vw.height);
-			cam->cmd_queue |= COMMAND_SETFORMAT;
-		}
-
-		mutex_unlock(&cam->param_lock);
-
-		/* setformat ignored by camera during streaming,
-		 * so stop/dispatch/start */
-		if (cam->cmd_queue & COMMAND_SETFORMAT) {
-			DBG("\n");
-			dispatch_commands(cam);
-		}
-		DBG("%d/%d:%d\n", cam->video_size,
-		    cam->vw.width, cam->vw.height);
-		break;
-	}
-
-	/* mmap interface */
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *vm = arg;
-		int i;
-
-		DBG("VIDIOCGMBUF\n");
-		memset(vm, 0, sizeof(*vm));
-		vm->size = CPIA_MAX_FRAME_SIZE*FRAME_NUM;
-		vm->frames = FRAME_NUM;
-		for (i = 0; i < FRAME_NUM; i++)
-			vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i;
-		break;
-	}
-
-	case VIDIOCMCAPTURE:
-	{
-		struct video_mmap *vm = arg;
-		int video_size;
-
-		DBG("VIDIOCMCAPTURE: %d / %d / %dx%d\n", vm->format, vm->frame,
-		    vm->width, vm->height);
-		if (vm->frame<0||vm->frame>=FRAME_NUM) {
-			retval = -EINVAL;
-			break;
-		}
-
-		/* set video format */
-		cam->vp.palette = vm->format;
-		switch(vm->format) {
-		case VIDEO_PALETTE_GREY:
-			cam->vp.depth=8;
-			break;
-		case VIDEO_PALETTE_RGB555:
-		case VIDEO_PALETTE_RGB565:
-		case VIDEO_PALETTE_YUV422:
-		case VIDEO_PALETTE_YUYV:
-		case VIDEO_PALETTE_UYVY:
-			cam->vp.depth = 16;
-			break;
-		case VIDEO_PALETTE_RGB24:
-			cam->vp.depth = 24;
-			break;
-		case VIDEO_PALETTE_RGB32:
-			cam->vp.depth = 32;
-			break;
-		default:
-			retval = -EINVAL;
-			break;
-		}
-		if (retval)
-			break;
-
-		/* set video size */
-		video_size = match_videosize(vm->width, vm->height);
-		if (video_size < 0) {
-			retval = -EINVAL;
-			break;
-		}
-		if (video_size != cam->video_size) {
-			cam->video_size = video_size;
-
-			/* video size is changing, reset the subcapture area */
-			memset(&cam->vc, 0, sizeof(cam->vc));
-
-			set_vw_size(cam);
-			cam->cmd_queue |= COMMAND_SETFORMAT;
-			dispatch_commands(cam);
-		}
-		/* according to v4l-spec we must start streaming here */
-		cam->mmap_kludge = 1;
-		retval = capture_frame(cam, vm);
-
-		break;
-	}
-
-	case VIDIOCSYNC:
-	{
-		int *frame = arg;
-
-		//DBG("VIDIOCSYNC: %d\n", *frame);
-
-		if (*frame<0 || *frame >= FRAME_NUM) {
-			retval = -EINVAL;
-			break;
-		}
-
-		switch (cam->frame[*frame].state) {
-		case FRAME_UNUSED:
-		case FRAME_READY:
-		case FRAME_GRABBING:
-			DBG("sync to unused frame %d\n", *frame);
-			retval = -EINVAL;
-			break;
-
-		case FRAME_DONE:
-			cam->frame[*frame].state = FRAME_UNUSED;
-			//DBG("VIDIOCSYNC: %d synced\n", *frame);
-			break;
-		}
-		if (retval == -EINTR) {
-			/* FIXME - xawtv does not handle this nice */
-			retval = 0;
-		}
-		break;
-	}
-
-	case VIDIOCGCAPTURE:
-	{
-		struct video_capture *vc = arg;
-
-		DBG("VIDIOCGCAPTURE\n");
-
-		*vc = cam->vc;
-
-		break;
-	}
-
-	case VIDIOCSCAPTURE:
-	{
-		struct video_capture *vc = arg;
-
-		DBG("VIDIOCSCAPTURE\n");
-
-		if (vc->decimation != 0) {    /* How should this be used? */
-			retval = -EINVAL;
-			break;
-		}
-		if (vc->flags != 0) {     /* Even/odd grab not supported */
-			retval = -EINVAL;
-			break;
-		}
-
-		/* Clip to the resolution we can set for the ROI
-		   (every 8 columns and 4 rows) */
-		vc->x      = vc->x      & ~(__u32)7;
-		vc->y      = vc->y      & ~(__u32)3;
-		vc->width  = vc->width  & ~(__u32)7;
-		vc->height = vc->height & ~(__u32)3;
-
-		if(vc->width == 0 || vc->height == 0 ||
-		   vc->x + vc->width  > cam->vw.width ||
-		   vc->y + vc->height > cam->vw.height) {
-			retval = -EINVAL;
-			break;
-		}
-
-		DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height);
-
-		mutex_lock(&cam->param_lock);
-
-		cam->vc.x      = vc->x;
-		cam->vc.y      = vc->y;
-		cam->vc.width  = vc->width;
-		cam->vc.height = vc->height;
-
-		set_vw_size(cam);
-		cam->cmd_queue |= COMMAND_SETFORMAT;
-
-		mutex_unlock(&cam->param_lock);
-
-		/* setformat ignored by camera during streaming,
-		 * so stop/dispatch/start */
-		dispatch_commands(cam);
-		break;
-	}
-
-	case VIDIOCGUNIT:
-	{
-		struct video_unit *vu = arg;
-
-		DBG("VIDIOCGUNIT\n");
-
-		vu->video    = cam->vdev.minor;
-		vu->vbi      = VIDEO_NO_UNIT;
-		vu->radio    = VIDEO_NO_UNIT;
-		vu->audio    = VIDEO_NO_UNIT;
-		vu->teletext = VIDEO_NO_UNIT;
-
-		break;
-	}
-
-
-	/* pointless to implement overlay with this camera */
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCKEY:
-	/* tuner interface - we have none */
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	/* audio interface - we have none */
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		retval = -EINVAL;
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-		break;
-	}
-
-	mutex_unlock(&cam->busy_lock);
-	return retval;
-}
-
-static long cpia_ioctl(struct file *file,
-		     unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, cpia_do_ioctl);
-}
-
-
-/* FIXME */
-static int cpia_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end - vma->vm_start;
-	unsigned long page, pos;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int retval;
-
-	if (!cam || !cam->ops)
-		return -ENODEV;
-
-	DBG("cpia_mmap: %ld\n", size);
-
-	if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE)
-		return -EINVAL;
-
-	/* make this _really_ smp-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	if (!cam->frame_buf) {	/* we do lazy allocation */
-		if ((retval = allocate_frame_buf(cam))) {
-			mutex_unlock(&cam->busy_lock);
-			return retval;
-		}
-	}
-
-	pos = (unsigned long)(cam->frame_buf);
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&cam->busy_lock);
-			return -EAGAIN;
-		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	DBG("cpia_mmap: %ld\n", size);
-	mutex_unlock(&cam->busy_lock);
-
-	return 0;
-}
-
-static const struct v4l2_file_operations cpia_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cpia_open,
-	.release       	= cpia_close,
-	.read		= cpia_read,
-	.mmap		= cpia_mmap,
-	.ioctl          = cpia_ioctl,
-};
-
-static struct video_device cpia_template = {
-	.name		= "CPiA Camera",
-	.fops           = &cpia_fops,
-	.release 	= video_device_release_empty,
-};
-
-/* initialise cam_data structure  */
-static void reset_camera_struct(struct cam_data *cam)
-{
-	/* The following parameter values are the defaults from
-	 * "Software Developer's Guide for CPiA Cameras".  Any changes
-	 * to the defaults are noted in comments. */
-	cam->params.colourParams.brightness = 50;
-	cam->params.colourParams.contrast = 48;
-	cam->params.colourParams.saturation = 50;
-	cam->params.exposure.gainMode = 4;
-	cam->params.exposure.expMode = 2;		/* AEC */
-	cam->params.exposure.compMode = 1;
-	cam->params.exposure.centreWeight = 1;
-	cam->params.exposure.gain = 0;
-	cam->params.exposure.fineExp = 0;
-	cam->params.exposure.coarseExpLo = 185;
-	cam->params.exposure.coarseExpHi = 0;
-	cam->params.exposure.redComp = COMP_RED;
-	cam->params.exposure.green1Comp = COMP_GREEN1;
-	cam->params.exposure.green2Comp = COMP_GREEN2;
-	cam->params.exposure.blueComp = COMP_BLUE;
-	cam->params.colourBalance.balanceMode = 2;	/* ACB */
-	cam->params.colourBalance.redGain = 32;
-	cam->params.colourBalance.greenGain = 6;
-	cam->params.colourBalance.blueGain = 92;
-	cam->params.apcor.gain1 = 0x18;
-	cam->params.apcor.gain2 = 0x16;
-	cam->params.apcor.gain4 = 0x24;
-	cam->params.apcor.gain8 = 0x34;
-	cam->params.flickerControl.flickerMode = 0;
-	cam->params.flickerControl.disabled = 1;
-
-	cam->params.flickerControl.coarseJump =
-		flicker_jumps[cam->mainsFreq]
-			     [cam->params.sensorFps.baserate]
-			     [cam->params.sensorFps.divisor];
-	cam->params.flickerControl.allowableOverExposure =
-		-find_over_exposure(cam->params.colourParams.brightness);
-	cam->params.vlOffset.gain1 = 20;
-	cam->params.vlOffset.gain2 = 24;
-	cam->params.vlOffset.gain4 = 26;
-	cam->params.vlOffset.gain8 = 26;
-	cam->params.compressionParams.hysteresis = 3;
-	cam->params.compressionParams.threshMax = 11;
-	cam->params.compressionParams.smallStep = 1;
-	cam->params.compressionParams.largeStep = 3;
-	cam->params.compressionParams.decimationHysteresis = 2;
-	cam->params.compressionParams.frDiffStepThresh = 5;
-	cam->params.compressionParams.qDiffStepThresh = 3;
-	cam->params.compressionParams.decimationThreshMod = 2;
-	/* End of default values from Software Developer's Guide */
-
-	cam->transfer_rate = 0;
-	cam->exposure_status = EXPOSURE_NORMAL;
-
-	/* Set Sensor FPS to 15fps. This seems better than 30fps
-	 * for indoor lighting. */
-	cam->params.sensorFps.divisor = 1;
-	cam->params.sensorFps.baserate = 1;
-
-	cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */
-	cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */
-
-	cam->params.format.subSample = SUBSAMPLE_422;
-	cam->params.format.yuvOrder = YUVORDER_YUYV;
-
-	cam->params.compression.mode = CPIA_COMPRESSION_AUTO;
-	cam->params.compressionTarget.frTargeting =
-		CPIA_COMPRESSION_TARGET_QUALITY;
-	cam->params.compressionTarget.targetFR = 15; /* From windows driver */
-	cam->params.compressionTarget.targetQ = 5; /* From windows driver */
-
-	cam->params.qx3.qx3_detected = 0;
-	cam->params.qx3.toplight = 0;
-	cam->params.qx3.bottomlight = 0;
-	cam->params.qx3.button = 0;
-	cam->params.qx3.cradled = 0;
-
-	cam->video_size = VIDEOSIZE_CIF;
-
-	cam->vp.colour = 32768;      /* 50% */
-	cam->vp.hue = 32768;         /* 50% */
-	cam->vp.brightness = 32768;  /* 50% */
-	cam->vp.contrast = 32768;    /* 50% */
-	cam->vp.whiteness = 0;       /* not used -> grayscale only */
-	cam->vp.depth = 24;          /* to be set by user */
-	cam->vp.palette = VIDEO_PALETTE_RGB24; /* to be set by user */
-
-	cam->vc.x = 0;
-	cam->vc.y = 0;
-	cam->vc.width = 0;
-	cam->vc.height = 0;
-
-	cam->vw.x = 0;
-	cam->vw.y = 0;
-	set_vw_size(cam);
-	cam->vw.chromakey = 0;
-	cam->vw.flags = 0;
-	cam->vw.clipcount = 0;
-	cam->vw.clips = NULL;
-
-	cam->cmd_queue = COMMAND_NONE;
-	cam->first_frame = 1;
-
-	return;
-}
-
-/* initialize cam_data structure  */
-static void init_camera_struct(struct cam_data *cam,
-			       struct cpia_camera_ops *ops )
-{
-	int i;
-
-	/* Default everything to 0 */
-	memset(cam, 0, sizeof(struct cam_data));
-
-	cam->ops = ops;
-	mutex_init(&cam->param_lock);
-	mutex_init(&cam->busy_lock);
-
-	reset_camera_struct(cam);
-
-	cam->proc_entry = NULL;
-
-	memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template));
-	video_set_drvdata(&cam->vdev, cam);
-
-	cam->curframe = 0;
-	for (i = 0; i < FRAME_NUM; i++) {
-		cam->frame[i].width = 0;
-		cam->frame[i].height = 0;
-		cam->frame[i].state = FRAME_UNUSED;
-		cam->frame[i].data = NULL;
-	}
-	cam->decompressed_frame.width = 0;
-	cam->decompressed_frame.height = 0;
-	cam->decompressed_frame.state = FRAME_UNUSED;
-	cam->decompressed_frame.data = NULL;
-}
-
-struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel)
-{
-	struct cam_data *camera;
-
-	if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL)
-		return NULL;
-
-
-	init_camera_struct( camera, ops );
-	camera->lowlevel_data = lowlevel;
-
-	/* register v4l device */
-	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		kfree(camera);
-		printk(KERN_DEBUG "video_register_device failed\n");
-		return NULL;
-	}
-
-	/* get version information from camera: open/reset/close */
-
-	/* open cpia */
-	if (camera->ops->open(camera->lowlevel_data))
-		return camera;
-
-	/* reset the camera */
-	if (reset_camera(camera) != 0) {
-		camera->ops->close(camera->lowlevel_data);
-		return camera;
-	}
-
-	/* close cpia */
-	camera->ops->close(camera->lowlevel_data);
-
-#ifdef CONFIG_PROC_FS
-	create_proc_cpia_cam(camera);
-#endif
-
-	printk(KERN_INFO "  CPiA Version: %d.%02d (%d.%d)\n",
-	       camera->params.version.firmwareVersion,
-	       camera->params.version.firmwareRevision,
-	       camera->params.version.vcVersion,
-	       camera->params.version.vcRevision);
-	printk(KERN_INFO "  CPiA PnP-ID: %04x:%04x:%04x\n",
-	       camera->params.pnpID.vendor,
-	       camera->params.pnpID.product,
-	       camera->params.pnpID.deviceRevision);
-	printk(KERN_INFO "  VP-Version: %d.%d %04x\n",
-	       camera->params.vpVersion.vpVersion,
-	       camera->params.vpVersion.vpRevision,
-	       camera->params.vpVersion.cameraHeadID);
-
-	return camera;
-}
-
-void cpia_unregister_camera(struct cam_data *cam)
-{
-	DBG("unregistering video\n");
-	video_unregister_device(&cam->vdev);
-	if (cam->open_count) {
-		put_cam(cam->ops);
-		DBG("camera open -- setting ops to NULL\n");
-		cam->ops = NULL;
-	}
-
-#ifdef CONFIG_PROC_FS
-	DBG("destroying /proc/cpia/%s\n", video_device_node_name(&cam->vdev));
-	destroy_proc_cpia_cam(cam);
-#endif
-	if (!cam->open_count) {
-		DBG("freeing camera\n");
-		kfree(cam);
-	}
-}
-
-static int __init cpia_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n", ABOUT,
-	       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
-
-	printk(KERN_WARNING "Since in-kernel colorspace conversion is not "
-	       "allowed, it is disabled by default now. Users should fix the "
-	       "applications in case they don't work without conversion "
-	       "reenabled by setting the 'colorspace_conv' module "
-	       "parameter to 1\n");
-
-#ifdef CONFIG_PROC_FS
-	proc_cpia_create();
-#endif
-
-	return 0;
-}
-
-static void __exit cpia_exit(void)
-{
-#ifdef CONFIG_PROC_FS
-	proc_cpia_destroy();
-#endif
-}
-
-module_init(cpia_init);
-module_exit(cpia_exit);
-
-/* Exported symbols for modules. */
-
-EXPORT_SYMBOL(cpia_register_camera);
-EXPORT_SYMBOL(cpia_unregister_camera);
diff --git a/drivers/staging/cpia/cpia.h b/drivers/staging/cpia/cpia.h
deleted file mode 100644
index 8f0cfee..0000000
--- a/drivers/staging/cpia/cpia.h
+++ /dev/null
@@ -1,432 +0,0 @@
-#ifndef cpia_h
-#define cpia_h
-
-/*
- * CPiA Parallel Port Video4Linux driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * (C) Copyright 1999 Bas Huisman,
- *                    Peter Pregler,
- *                    Scott J. Bertin,
- *                    VLSI Vision Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define CPIA_MAJ_VER	1
-#define CPIA_MIN_VER   2
-#define CPIA_PATCH_VER	3
-
-#define CPIA_PP_MAJ_VER       CPIA_MAJ_VER
-#define CPIA_PP_MIN_VER       CPIA_MIN_VER
-#define CPIA_PP_PATCH_VER     CPIA_PATCH_VER
-
-#define CPIA_USB_MAJ_VER      CPIA_MAJ_VER
-#define CPIA_USB_MIN_VER      CPIA_MIN_VER
-#define CPIA_USB_PATCH_VER    CPIA_PATCH_VER
-
-#define CPIA_MAX_FRAME_SIZE_UNALIGNED	(352 * 288 * 4)   /* CIF at RGB32 */
-#define CPIA_MAX_FRAME_SIZE	((CPIA_MAX_FRAME_SIZE_UNALIGNED + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) /* align above to PAGE_SIZE */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-
-struct cpia_camera_ops
-{
-	/* open sets privdata to point to structure for this camera.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*open)(void *privdata);
-
-	/* Registers callback function cb to be called with cbdata
-	 * when an image is ready.  If cb is NULL, only single image grabs
-	 * should be used.  cb should immediately call streamRead to read
-	 * the data or data may be lost. Returns negative value on error,
-	 * otherwise 0.
-	 */
-	int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
-				void *cbdata);
-
-	/* transferCmd sends commands to the camera.  command MUST point to
-	 * an  8 byte buffer in kernel space. data can be NULL if no extra
-	 * data is needed.  The size of the data is given by the last 2
-	 * bytes of command.  data must also point to memory in kernel space.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*transferCmd)(void *privdata, u8 *command, u8 *data);
-
-	/* streamStart initiates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStart)(void *privdata);
-
-	/* streamStop terminates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStop)(void *privdata);
-
-	/* streamRead reads a frame from the camera.  buffer points to a
-	 * buffer large enough to hold a complete frame in kernel space.
-	 * noblock indicates if this should be a non blocking read.
-	 * Returns the number of bytes read, or negative value on error.
-	 */
-	int (*streamRead)(void *privdata, u8 *buffer, int noblock);
-
-	/* close disables the device until open() is called again.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*close)(void *privdata);
-
-	/* If wait_for_stream_ready is non-zero, wait until the streamState
-	 * is STREAM_READY before calling streamRead.
-	 */
-	int wait_for_stream_ready;
-
-	/*
-	 * Used to maintain lowlevel module usage counts
-	 */
-	struct module *owner;
-};
-
-struct cpia_frame {
-	u8 *data;
-	int count;
-	int width;
-	int height;
-	volatile int state;
-};
-
-struct cam_params {
-	struct {
-		u8 firmwareVersion;
-		u8 firmwareRevision;
-		u8 vcVersion;
-		u8 vcRevision;
-	} version;
-	struct {
-		u16 vendor;
-		u16 product;
-		u16 deviceRevision;
-	} pnpID;
-	struct {
-		u8 vpVersion;
-		u8 vpRevision;
-		u16 cameraHeadID;
-	} vpVersion;
-	struct {
-		u8 systemState;
-		u8 grabState;
-		u8 streamState;
-		u8 fatalError;
-		u8 cmdError;
-		u8 debugFlags;
-		u8 vpStatus;
-		u8 errorCode;
-	} status;
-	struct {
-		u8 brightness;
-		u8 contrast;
-		u8 saturation;
-	} colourParams;
-	struct {
-		u8 gainMode;
-		u8 expMode;
-		u8 compMode;
-		u8 centreWeight;
-		u8 gain;
-		u8 fineExp;
-		u8 coarseExpLo;
-		u8 coarseExpHi;
-		u8 redComp;
-		u8 green1Comp;
-		u8 green2Comp;
-		u8 blueComp;
-	} exposure;
-	struct {
-		u8 balanceMode;
-		u8 redGain;
-		u8 greenGain;
-		u8 blueGain;
-	} colourBalance;
-	struct {
-		u8 divisor;
-		u8 baserate;
-	} sensorFps;
-	struct {
-		u8 gain1;
-		u8 gain2;
-		u8 gain4;
-		u8 gain8;
-	} apcor;
-	struct {
-		u8 disabled;
-		u8 flickerMode;
-		u8 coarseJump;
-		int allowableOverExposure;
-	} flickerControl;
-	struct {
-		u8 gain1;
-		u8 gain2;
-		u8 gain4;
-		u8 gain8;
-	} vlOffset;
-	struct {
-		u8 mode;
-		u8 decimation;
-	} compression;
-	struct {
-		u8 frTargeting;
-		u8 targetFR;
-		u8 targetQ;
-	} compressionTarget;
-	struct {
-		u8 yThreshold;
-		u8 uvThreshold;
-	} yuvThreshold;
-	struct {
-		u8 hysteresis;
-		u8 threshMax;
-		u8 smallStep;
-		u8 largeStep;
-		u8 decimationHysteresis;
-		u8 frDiffStepThresh;
-		u8 qDiffStepThresh;
-		u8 decimationThreshMod;
-	} compressionParams;
-	struct {
-		u8 videoSize;		/* CIF/QCIF */
-		u8 subSample;
-		u8 yuvOrder;
-	} format;
-	struct {                        /* Intel QX3 specific data */
-		u8 qx3_detected;        /* a QX3 is present */
-		u8 toplight;            /* top light lit , R/W */
-		u8 bottomlight;         /* bottom light lit, R/W */
-		u8 button;              /* snapshot button pressed (R/O) */
-		u8 cradled;             /* microscope is in cradle (R/O) */
-	} qx3;
-	struct {
-		u8 colStart;		/* skip first 8*colStart pixels */
-		u8 colEnd;		/* finish at 8*colEnd pixels */
-		u8 rowStart;		/* skip first 4*rowStart lines */
-		u8 rowEnd;		/* finish at 4*rowEnd lines */
-	} roi;
-	u8 ecpTiming;
-	u8 streamStartLine;
-};
-
-enum v4l_camstates {
-	CPIA_V4L_IDLE = 0,
-	CPIA_V4L_ERROR,
-	CPIA_V4L_COMMAND,
-	CPIA_V4L_GRABBING,
-	CPIA_V4L_STREAMING,
-	CPIA_V4L_STREAMING_PAUSED,
-};
-
-#define FRAME_NUM	2	/* double buffering for now */
-
-struct cam_data {
-	struct list_head cam_data_list;
-
-	struct mutex busy_lock;		/* guard against SMP multithreading */
-	struct cpia_camera_ops *ops;	/* lowlevel driver operations */
-	void *lowlevel_data;		/* private data for lowlevel driver */
-	u8 *raw_image;			/* buffer for raw image data */
-	struct cpia_frame decompressed_frame;
-					/* buffer to hold decompressed frame */
-	int image_size;			/* sizeof last decompressed image */
-	int open_count;			/* # of process that have camera open */
-
-				/* camera status */
-	int fps;			/* actual fps reported by the camera */
-	int transfer_rate;		/* transfer rate from camera in kB/s */
-	u8 mainsFreq;			/* for flicker control */
-
-				/* proc interface */
-	struct mutex param_lock;	/* params lock for this camera */
-	struct cam_params params;	/* camera settings */
-	struct proc_dir_entry *proc_entry;	/* /proc/cpia/videoX */
-
-					/* v4l */
-	int video_size;			/* VIDEO_SIZE_ */
-	volatile enum v4l_camstates camstate;	/* v4l layer status */
-	struct video_device vdev;	/* v4l videodev */
-	struct video_picture vp;	/* v4l camera settings */
-	struct video_window vw;		/* v4l capture area */
-	struct video_capture vc;       	/* v4l subcapture area */
-
-				/* mmap interface */
-	int curframe;			/* the current frame to grab into */
-	u8 *frame_buf;			/* frame buffer data */
-	struct cpia_frame frame[FRAME_NUM];
-				/* FRAME_NUM-buffering, so we need a array */
-
-	int first_frame;
-	int mmap_kludge;		/* 'wrong' byte order for mmap */
-	volatile u32 cmd_queue;		/* queued commands */
-	int exposure_status;		/* EXPOSURE_* */
-	int exposure_count;		/* number of frames at this status */
-};
-
-/* cpia_register_camera is called by low level driver for each camera.
- * A unique camera number is returned, or a negative value on error */
-struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel);
-
-/* cpia_unregister_camera is called by low level driver when a camera
- * is removed.  This must not fail. */
-void cpia_unregister_camera(struct cam_data *cam);
-
-/* raw CIF + 64 byte header + (2 bytes line_length + EOL) per line + 4*EOI +
- * one byte 16bit DMA alignment
- */
-#define CPIA_MAX_IMAGE_SIZE ((352*288*2)+64+(288*3)+5)
-
-/* constant value's */
-#define MAGIC_0		0x19
-#define MAGIC_1		0x68
-#define DATA_IN		0xC0
-#define DATA_OUT	0x40
-#define VIDEOSIZE_QCIF	0	/* 176x144 */
-#define VIDEOSIZE_CIF	1	/* 352x288 */
-#define VIDEOSIZE_SIF	2	/* 320x240 */
-#define VIDEOSIZE_QSIF	3	/* 160x120 */
-#define VIDEOSIZE_48_48		4 /* where no one has gone before, iconsize! */
-#define VIDEOSIZE_64_48		5
-#define VIDEOSIZE_128_96	6
-#define VIDEOSIZE_160_120	VIDEOSIZE_QSIF
-#define VIDEOSIZE_176_144	VIDEOSIZE_QCIF
-#define VIDEOSIZE_192_144	7
-#define VIDEOSIZE_224_168	8
-#define VIDEOSIZE_256_192	9
-#define VIDEOSIZE_288_216	10
-#define VIDEOSIZE_320_240	VIDEOSIZE_SIF
-#define VIDEOSIZE_352_288	VIDEOSIZE_CIF
-#define VIDEOSIZE_88_72		11 /* quarter CIF */
-#define SUBSAMPLE_420	0
-#define SUBSAMPLE_422	1
-#define YUVORDER_YUYV	0
-#define YUVORDER_UYVY	1
-#define NOT_COMPRESSED	0
-#define COMPRESSED	1
-#define NO_DECIMATION	0
-#define DECIMATION_ENAB	1
-#define EOI		0xff	/* End Of Image */
-#define EOL		0xfd	/* End Of Line */
-#define FRAME_HEADER_SIZE	64
-
-/* Image grab modes */
-#define CPIA_GRAB_SINGLE	0
-#define CPIA_GRAB_CONTINUOUS	1
-
-/* Compression parameters */
-#define CPIA_COMPRESSION_NONE	0
-#define CPIA_COMPRESSION_AUTO	1
-#define CPIA_COMPRESSION_MANUAL	2
-#define CPIA_COMPRESSION_TARGET_QUALITY         0
-#define CPIA_COMPRESSION_TARGET_FRAMERATE       1
-
-/* Return offsets for GetCameraState */
-#define SYSTEMSTATE	0
-#define GRABSTATE	1
-#define STREAMSTATE	2
-#define FATALERROR	3
-#define CMDERROR	4
-#define DEBUGFLAGS	5
-#define VPSTATUS	6
-#define ERRORCODE	7
-
-/* SystemState */
-#define UNINITIALISED_STATE	0
-#define PASS_THROUGH_STATE	1
-#define LO_POWER_STATE		2
-#define HI_POWER_STATE		3
-#define WARM_BOOT_STATE		4
-
-/* GrabState */
-#define GRAB_IDLE		0
-#define GRAB_ACTIVE		1
-#define GRAB_DONE		2
-
-/* StreamState */
-#define STREAM_NOT_READY	0
-#define STREAM_READY		1
-#define STREAM_OPEN		2
-#define STREAM_PAUSED		3
-#define STREAM_FINISHED		4
-
-/* Fatal Error, CmdError, and DebugFlags */
-#define CPIA_FLAG	  1
-#define SYSTEM_FLAG	  2
-#define INT_CTRL_FLAG	  4
-#define PROCESS_FLAG	  8
-#define COM_FLAG	 16
-#define VP_CTRL_FLAG	 32
-#define CAPTURE_FLAG	 64
-#define DEBUG_FLAG	128
-
-/* VPStatus */
-#define VP_STATE_OK			0x00
-
-#define VP_STATE_FAILED_VIDEOINIT	0x01
-#define VP_STATE_FAILED_AECACBINIT	0x02
-#define VP_STATE_AEC_MAX		0x04
-#define VP_STATE_ACB_BMAX		0x08
-
-#define VP_STATE_ACB_RMIN		0x10
-#define VP_STATE_ACB_GMIN		0x20
-#define VP_STATE_ACB_RMAX		0x40
-#define VP_STATE_ACB_GMAX		0x80
-
-/* default (minimum) compensation values */
-#define COMP_RED        220
-#define COMP_GREEN1     214
-#define COMP_GREEN2     COMP_GREEN1
-#define COMP_BLUE       230
-
-/* exposure status */
-#define EXPOSURE_VERY_LIGHT 0
-#define EXPOSURE_LIGHT      1
-#define EXPOSURE_NORMAL     2
-#define EXPOSURE_DARK       3
-#define EXPOSURE_VERY_DARK  4
-
-/* ErrorCode */
-#define ERROR_FLICKER_BELOW_MIN_EXP     0x01 /*flicker exposure got below minimum exposure */
-#define ALOG(fmt,args...) printk(fmt, ##args)
-#define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __func__ , __LINE__ , ##args)
-
-#ifdef _CPIA_DEBUG_
-#define ADBG(fmt,args...) printk(fmt, jiffies, ##args)
-#define DBG(fmt,args...) ADBG(KERN_DEBUG __FILE__" (%ld):%s(%d):" fmt, __func__, __LINE__ , ##args)
-#else
-#define DBG(fmn,args...) do {} while(0)
-#endif
-
-#define DEB_BYTE(p)\
-  DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
-      (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
-	(p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
-
-#endif /* __KERNEL__ */
-
-#endif /* cpia_h */
diff --git a/drivers/staging/cpia/cpia_pp.c b/drivers/staging/cpia/cpia_pp.c
deleted file mode 100644
index f5604c1..0000000
--- a/drivers/staging/cpia/cpia_pp.c
+++ /dev/null
@@ -1,869 +0,0 @@
-/*
- * cpia_pp CPiA Parallel Port driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * (C) Copyright 1999 Bas Huisman <bhuism@cs.utwente.nl>
- * (C) Copyright 1999-2000 Scott J. Bertin <sbertin@securenym.net>,
- * (C) Copyright 1999-2000 Peter Pregler <Peter_Pregler@email.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/kernel.h>
-#include <linux/parport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <linux/kmod.h>
-
-/* #define _CPIA_DEBUG_		define for verbose debug output */
-#include "cpia.h"
-
-static int cpia_pp_open(void *privdata);
-static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata),
-				    void *cbdata);
-static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data);
-static int cpia_pp_streamStart(void *privdata);
-static int cpia_pp_streamStop(void *privdata);
-static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock);
-static int cpia_pp_close(void *privdata);
-
-
-#define ABOUT "Parallel port driver for Vision CPiA based cameras"
-
-#define PACKET_LENGTH  8
-
-/* Magic numbers for defining port-device mappings */
-#define PPCPIA_PARPORT_UNSPEC -4
-#define PPCPIA_PARPORT_AUTO -3
-#define PPCPIA_PARPORT_OFF -2
-#define PPCPIA_PARPORT_NONE -1
-
-static int parport_nr[PARPORT_MAX] = {[0 ... PARPORT_MAX - 1] = PPCPIA_PARPORT_UNSPEC};
-static char *parport[PARPORT_MAX] = {NULL,};
-
-MODULE_AUTHOR("B. Huisman <bhuism@cs.utwente.nl> & Peter Pregler <Peter_Pregler@email.com>");
-MODULE_DESCRIPTION("Parallel port driver for Vision CPiA based cameras");
-MODULE_LICENSE("GPL");
-
-module_param_array(parport, charp, NULL, 0);
-MODULE_PARM_DESC(parport, "'auto' or a list of parallel port numbers. Just like lp.");
-
-struct pp_cam_entry {
-	struct pardevice *pdev;
-	struct parport *port;
-	struct work_struct cb_task;
-	void (*cb_func)(void *cbdata);
-	void *cb_data;
-	int open_count;
-	wait_queue_head_t wq_stream;
-	/* image state flags */
-	int image_ready;	/* we got an interrupt */
-	int image_complete;	/* we have seen 4 EOI */
-
-	int streaming; /* we are in streaming mode */
-	int stream_irq;
-};
-
-static struct cpia_camera_ops cpia_pp_ops =
-{
-	cpia_pp_open,
-	cpia_pp_registerCallback,
-	cpia_pp_transferCmd,
-	cpia_pp_streamStart,
-	cpia_pp_streamStop,
-	cpia_pp_streamRead,
-	cpia_pp_close,
-	1,
-	THIS_MODULE
-};
-
-static LIST_HEAD(cam_list);
-static spinlock_t cam_list_lock_pp;
-
-/* FIXME */
-static void cpia_parport_enable_irq( struct parport *port ) {
-	parport_enable_irq(port);
-	mdelay(10);
-	return;
-}
-
-static void cpia_parport_disable_irq( struct parport *port ) {
-	parport_disable_irq(port);
-	mdelay(10);
-	return;
-}
-
-/* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility
- * Link Flag during negotiation */
-#define UPLOAD_FLAG  0x08
-#define NIBBLE_TRANSFER 0x01
-#define ECP_TRANSFER 0x03
-
-#define PARPORT_CHUNK_SIZE	PAGE_SIZE
-
-
-static void cpia_pp_run_callback(struct work_struct *work)
-{
-	void (*cb_func)(void *cbdata);
-	void *cb_data;
-	struct pp_cam_entry *cam;
-
-	cam = container_of(work, struct pp_cam_entry, cb_task);
-	cb_func = cam->cb_func;
-	cb_data = cam->cb_data;
-
-	cb_func(cb_data);
-}
-
-/****************************************************************************
- *
- *  CPiA-specific  low-level parport functions for nibble uploads
- *
- ***************************************************************************/
-/*  CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */
-/* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */
-
-static size_t cpia_read_nibble (struct parport *port,
-			 void *buffer, size_t len,
-			 int flags)
-{
-	/* adapted verbatim, with one change, from
-	   parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */
-
-	unsigned char *buf = buffer;
-	int i;
-	unsigned char byte = 0;
-
-	len *= 2; /* in nibbles */
-	for (i=0; i < len; i++) {
-		unsigned char nibble;
-
-		/* The CPiA firmware suppresses the use of nDataAvail (nFault LO)
-		 * after every second nibble to signal that more
-		 * data is available.  (the total number of Bytes that
-		 * should be sent is known; if too few are received, an error
-		 * will be recorded after a timeout).
-		 * This is incompatible with parport_ieee1284_read_nibble(),
-		 * which expects to find nFault LO after every second nibble.
-		 */
-
-		/* Solution: modify cpia_read_nibble to only check for
-		 * nDataAvail before the first nibble is sent.
-		 */
-
-		/* Does the error line indicate end of data? */
-		if (((i /*& 1*/) == 0) &&
-		    (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
-			DBG("%s: No more nibble data (%d bytes)\n",
-			    port->name, i/2);
-			goto end_of_data;
-		}
-
-		/* Event 7: Set nAutoFd low. */
-		parport_frob_control (port,
-				      PARPORT_CONTROL_AUTOFD,
-				      PARPORT_CONTROL_AUTOFD);
-
-		/* Event 9: nAck goes low. */
-		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK, 0)) {
-			/* Timeout -- no more data? */
-				 DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
-			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-			break;
-		}
-
-
-		/* Read a nibble. */
-		nibble = parport_read_status (port) >> 3;
-		nibble &= ~8;
-		if ((nibble & 0x10) == 0)
-			nibble |= 8;
-		nibble &= 0xf;
-
-		/* Event 10: Set nAutoFd high. */
-		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-
-		/* Event 11: nAck goes high. */
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK,
-					     PARPORT_STATUS_ACK)) {
-			/* Timeout -- no more data? */
-			DBG("%s: Nibble timeout at event 11\n",
-				 port->name);
-			break;
-		}
-
-		if (i & 1) {
-			/* Second nibble */
-			byte |= nibble << 4;
-			*buf++ = byte;
-		} else
-			byte = nibble;
-	}
-
-	if (i == len) {
-		/* Read the last nibble without checking data avail. */
-		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
-		end_of_data:
-			/* Go to reverse idle phase. */
-			parport_frob_control (port,
-					      PARPORT_CONTROL_AUTOFD,
-					      PARPORT_CONTROL_AUTOFD);
-			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-		}
-		else
-			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
-	}
-
-	return i/2;
-}
-
-/* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
- * (See CPiA Data sheet p. 31)
- *
- * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
- * nonstandard variant of nibble mode which allows the same (mediocre)
- * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
- * parallel ports, but works also for  non-TRISTATE-capable ports.
- * (Standard nibble mode only send 4 bits per cycle)
- *
- */
-
-static size_t cpia_read_nibble_stream(struct parport *port,
-			       void *buffer, size_t len,
-			       int flags)
-{
-	int i;
-	unsigned char *buf = buffer;
-	int endseen = 0;
-
-	for (i=0; i < len; i++) {
-		unsigned char nibble[2], byte = 0;
-		int j;
-
-		/* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
-		if (endseen > 3 )
-			break;
-
-		/* Event 7: Set nAutoFd low. */
-		parport_frob_control (port,
-				      PARPORT_CONTROL_AUTOFD,
-				      PARPORT_CONTROL_AUTOFD);
-
-		/* Event 9: nAck goes low. */
-		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK, 0)) {
-			/* Timeout -- no more data? */
-				 DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
-			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-			break;
-		}
-
-		/* Read lower nibble */
-		nibble[0] = parport_read_status (port) >>3;
-
-		/* Event 10: Set nAutoFd high. */
-		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-
-		/* Event 11: nAck goes high. */
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK,
-					     PARPORT_STATUS_ACK)) {
-			/* Timeout -- no more data? */
-			DBG("%s: Nibble timeout at event 11\n",
-				 port->name);
-			break;
-		}
-
-		/* Read upper nibble */
-		nibble[1] = parport_read_status (port) >>3;
-
-		/* reassemble the byte */
-		for (j = 0; j < 2 ; j++ ) {
-			nibble[j] &= ~8;
-			if ((nibble[j] & 0x10) == 0)
-				nibble[j] |= 8;
-			nibble[j] &= 0xf;
-		}
-		byte = (nibble[0] |(nibble[1] << 4));
-		*buf++ = byte;
-
-		if(byte == EOI)
-		  endseen++;
-		else
-		  endseen = 0;
-	}
-	return i;
-}
-
-/****************************************************************************
- *
- *  EndTransferMode
- *
- ***************************************************************************/
-static void EndTransferMode(struct pp_cam_entry *cam)
-{
-	parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
-}
-
-/****************************************************************************
- *
- *  ForwardSetup
- *
- ***************************************************************************/
-static int ForwardSetup(struct pp_cam_entry *cam)
-{
-	int retry;
-
-	/* The CPiA uses ECP protocol for Downloads from the Host to the camera.
-	 * This will be software-emulated if ECP hardware is not present
-	 */
-
-	/* the usual camera maximum response time is 10ms, but after receiving
-	 * some commands, it needs up to 40ms. (Data Sheet p. 32)*/
-
-	for(retry = 0; retry < 4; ++retry) {
-		if(!parport_negotiate(cam->port, IEEE1284_MODE_ECP)) {
-			break;
-		}
-		mdelay(10);
-	}
-	if(retry == 4) {
-		DBG("Unable to negotiate IEEE1284 ECP Download mode\n");
-		return -1;
-	}
-	return 0;
-}
-/****************************************************************************
- *
- *  ReverseSetup
- *
- ***************************************************************************/
-static int ReverseSetup(struct pp_cam_entry *cam, int extensibility)
-{
-	int retry;
-	int upload_mode, mode = IEEE1284_MODE_ECP;
-	int transfer_mode = ECP_TRANSFER;
-
-	if (!(cam->port->modes & PARPORT_MODE_ECP) &&
-	     !(cam->port->modes & PARPORT_MODE_TRISTATE)) {
-		mode = IEEE1284_MODE_NIBBLE;
-		transfer_mode = NIBBLE_TRANSFER;
-	}
-
-	upload_mode = mode;
-	if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK;
-
-	/* the usual camera maximum response time is 10ms, but after
-	 * receiving some commands, it needs up to 40ms. */
-
-	for(retry = 0; retry < 4; ++retry) {
-		if(!parport_negotiate(cam->port, mode)) {
-			break;
-		}
-		mdelay(10);
-	}
-	if(retry == 4) {
-		if(extensibility)
-			DBG("Unable to negotiate upload extensibility mode\n");
-		else
-			DBG("Unable to negotiate upload mode\n");
-		return -1;
-	}
-	if(extensibility) cam->port->ieee1284.mode = upload_mode;
-	return 0;
-}
-
-/****************************************************************************
- *
- *  WritePacket
- *
- ***************************************************************************/
-static int WritePacket(struct pp_cam_entry *cam, const u8 *packet, size_t size)
-{
-	int retval=0;
-	int size_written;
-
-	if (packet == NULL) {
-		return -EINVAL;
-	}
-	if (ForwardSetup(cam)) {
-		DBG("Write failed in setup\n");
-		return -EIO;
-	}
-	size_written = parport_write(cam->port, packet, size);
-	if(size_written != size) {
-		DBG("Write failed, wrote %d/%d\n", size_written, size);
-		retval = -EIO;
-	}
-	EndTransferMode(cam);
-	return retval;
-}
-
-/****************************************************************************
- *
- *  ReadPacket
- *
- ***************************************************************************/
-static int ReadPacket(struct pp_cam_entry *cam, u8 *packet, size_t size)
-{
-	int retval=0;
-
-	if (packet == NULL) {
-		return -EINVAL;
-	}
-	if (ReverseSetup(cam, 0)) {
-		return -EIO;
-	}
-
-	/* support for CPiA variant nibble reads */
-	if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) {
-		if(cpia_read_nibble(cam->port, packet, size, 0) != size)
-			retval = -EIO;
-	} else {
-		if(parport_read(cam->port, packet, size) != size)
-			retval = -EIO;
-	}
-	EndTransferMode(cam);
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamStart
- *
- ***************************************************************************/
-static int cpia_pp_streamStart(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	DBG("\n");
-	cam->streaming=1;
-	cam->image_ready=0;
-	//if (ReverseSetup(cam,1)) return -EIO;
-	if(cam->stream_irq) cpia_parport_enable_irq(cam->port);
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamStop
- *
- ***************************************************************************/
-static int cpia_pp_streamStop(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-
-	DBG("\n");
-	cam->streaming=0;
-	cpia_parport_disable_irq(cam->port);
-	//EndTransferMode(cam);
-
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamRead
- *
- ***************************************************************************/
-static int cpia_pp_read(struct parport *port, u8 *buffer, int len)
-{
-	int bytes_read;
-
-	/* support for CPiA variant "nibble stream" reads */
-	if(port->ieee1284.mode == IEEE1284_MODE_NIBBLE)
-		bytes_read = cpia_read_nibble_stream(port,buffer,len,0);
-	else {
-		int new_bytes;
-		for(bytes_read=0; bytes_read<len; bytes_read += new_bytes) {
-			new_bytes = parport_read(port, buffer+bytes_read,
-						 len-bytes_read);
-			if(new_bytes < 0) break;
-		}
-	}
-	return bytes_read;
-}
-
-static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock)
-{
-	struct pp_cam_entry *cam = privdata;
-	int read_bytes = 0;
-	int i, endseen, block_size, new_bytes;
-
-	if(cam == NULL) {
-		DBG("Internal driver error: cam is NULL\n");
-		return -EINVAL;
-	}
-	if(buffer == NULL) {
-		DBG("Internal driver error: buffer is NULL\n");
-		return -EINVAL;
-	}
-	//if(cam->streaming) DBG("%d / %d\n", cam->image_ready, noblock);
-	if( cam->stream_irq ) {
-		DBG("%d\n", cam->image_ready);
-		cam->image_ready--;
-	}
-	cam->image_complete=0;
-	if (0/*cam->streaming*/) {
-		if(!cam->image_ready) {
-			if(noblock) return -EWOULDBLOCK;
-			interruptible_sleep_on(&cam->wq_stream);
-			if( signal_pending(current) ) return -EINTR;
-			DBG("%d\n", cam->image_ready);
-		}
-	} else {
-		if (ReverseSetup(cam, 1)) {
-			DBG("unable to ReverseSetup\n");
-			return -EIO;
-		}
-	}
-	endseen = 0;
-	block_size = PARPORT_CHUNK_SIZE;
-	while( !cam->image_complete ) {
-		cond_resched();
-
-		new_bytes = cpia_pp_read(cam->port, buffer, block_size );
-		if( new_bytes <= 0 ) {
-			break;
-		}
-		i=-1;
-		while(++i<new_bytes && endseen<4) {
-			if(*buffer==EOI) {
-				endseen++;
-			} else {
-				endseen=0;
-			}
-			buffer++;
-		}
-		read_bytes += i;
-		if( endseen==4 ) {
-			cam->image_complete=1;
-			break;
-		}
-		if( CPIA_MAX_IMAGE_SIZE-read_bytes <= PARPORT_CHUNK_SIZE ) {
-			block_size=CPIA_MAX_IMAGE_SIZE-read_bytes;
-		}
-	}
-	EndTransferMode(cam);
-	return cam->image_complete ? read_bytes : -EIO;
-}
-/****************************************************************************
- *
- *  cpia_pp_transferCmd
- *
- ***************************************************************************/
-static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data)
-{
-	int err;
-	int retval=0;
-	int databytes;
-	struct pp_cam_entry *cam = privdata;
-
-	if(cam == NULL) {
-		DBG("Internal driver error: cam is NULL\n");
-		return -EINVAL;
-	}
-	if(command == NULL) {
-		DBG("Internal driver error: command is NULL\n");
-		return -EINVAL;
-	}
-	databytes = (((int)command[7])<<8) | command[6];
-	if ((err = WritePacket(cam, command, PACKET_LENGTH)) < 0) {
-		DBG("Error writing command\n");
-		return err;
-	}
-	if(command[0] == DATA_IN) {
-		u8 buffer[8];
-		if(data == NULL) {
-			DBG("Internal driver error: data is NULL\n");
-			return -EINVAL;
-		}
-		if((err = ReadPacket(cam, buffer, 8)) < 0) {
-			DBG("Error reading command result\n");
-		       return err;
-		}
-		memcpy(data, buffer, databytes);
-	} else if(command[0] == DATA_OUT) {
-		if(databytes > 0) {
-			if(data == NULL) {
-				DBG("Internal driver error: data is NULL\n");
-				retval = -EINVAL;
-			} else {
-				if((err=WritePacket(cam, data, databytes)) < 0){
-					DBG("Error writing command data\n");
-					return err;
-				}
-			}
-		}
-	} else {
-		DBG("Unexpected first byte of command: %x\n", command[0]);
-		retval = -EINVAL;
-	}
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_open
- *
- ***************************************************************************/
-static int cpia_pp_open(void *privdata)
-{
-	struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata;
-
-	if (cam == NULL)
-		return -EINVAL;
-
-	if(cam->open_count == 0) {
-		if (parport_claim(cam->pdev)) {
-			DBG("failed to claim the port\n");
-			return -EBUSY;
-		}
-		parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
-		parport_data_forward(cam->port);
-		parport_write_control(cam->port, PARPORT_CONTROL_SELECT);
-		udelay(50);
-		parport_write_control(cam->port,
-				      PARPORT_CONTROL_SELECT
-				      | PARPORT_CONTROL_INIT);
-	}
-
-	++cam->open_count;
-
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_registerCallback
- *
- ***************************************************************************/
-static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), void *cbdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	int retval = 0;
-
-	if(cam->port->irq != PARPORT_IRQ_NONE) {
-		cam->cb_func = cb;
-		cam->cb_data = cbdata;
-		INIT_WORK(&cam->cb_task, cpia_pp_run_callback);
-	} else {
-		retval = -1;
-	}
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_close
- *
- ***************************************************************************/
-static int cpia_pp_close(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	if (--cam->open_count == 0) {
-		parport_release(cam->pdev);
-	}
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_register
- *
- ***************************************************************************/
-static int cpia_pp_register(struct parport *port)
-{
-	struct pardevice *pdev = NULL;
-	struct pp_cam_entry *cam;
-	struct cam_data *cpia;
-
-	if (!(port->modes & PARPORT_MODE_PCSPP)) {
-		LOG("port is not supported by CPiA driver\n");
-		return -ENXIO;
-	}
-
-	cam = kzalloc(sizeof(struct pp_cam_entry), GFP_KERNEL);
-	if (cam == NULL) {
-		LOG("failed to allocate camera structure\n");
-		return -ENOMEM;
-	}
-
-	pdev = parport_register_device(port, "cpia_pp", NULL, NULL,
-				       NULL, 0, cam);
-
-	if (!pdev) {
-		LOG("failed to parport_register_device\n");
-		kfree(cam);
-		return -ENXIO;
-	}
-
-	cam->pdev = pdev;
-	cam->port = port;
-	init_waitqueue_head(&cam->wq_stream);
-
-	cam->streaming = 0;
-	cam->stream_irq = 0;
-
-	if((cpia = cpia_register_camera(&cpia_pp_ops, cam)) == NULL) {
-		LOG("failed to cpia_register_camera\n");
-		parport_unregister_device(pdev);
-		kfree(cam);
-		return -ENXIO;
-	}
-	spin_lock( &cam_list_lock_pp );
-	list_add( &cpia->cam_data_list, &cam_list );
-	spin_unlock( &cam_list_lock_pp );
-
-	return 0;
-}
-
-static void cpia_pp_detach (struct parport *port)
-{
-	struct list_head *tmp;
-	struct cam_data *cpia = NULL;
-	struct pp_cam_entry *cam;
-
-	spin_lock( &cam_list_lock_pp );
-	list_for_each (tmp, &cam_list) {
-		cpia = list_entry(tmp, struct cam_data, cam_data_list);
-		cam = (struct pp_cam_entry *) cpia->lowlevel_data;
-		if (cam && cam->port->number == port->number) {
-			list_del(&cpia->cam_data_list);
-			break;
-		}
-		cpia = NULL;
-	}
-	spin_unlock( &cam_list_lock_pp );
-
-	if (!cpia) {
-		DBG("cpia_pp_detach failed to find cam_data in cam_list\n");
-		return;
-	}
-
-	cam = (struct pp_cam_entry *) cpia->lowlevel_data;
-	cpia_unregister_camera(cpia);
-	if(cam->open_count > 0)
-		cpia_pp_close(cam);
-	parport_unregister_device(cam->pdev);
-	cpia->lowlevel_data = NULL;
-	kfree(cam);
-}
-
-static void cpia_pp_attach (struct parport *port)
-{
-	unsigned int i;
-
-	switch (parport_nr[0])
-	{
-	case PPCPIA_PARPORT_UNSPEC:
-	case PPCPIA_PARPORT_AUTO:
-		if (port->probe_info[0].class != PARPORT_CLASS_MEDIA ||
-		    port->probe_info[0].cmdset == NULL ||
-		    strncmp(port->probe_info[0].cmdset, "CPIA_1", 6) != 0)
-			return;
-
-		cpia_pp_register(port);
-
-		break;
-
-	default:
-		for (i = 0; i < PARPORT_MAX; ++i) {
-			if (port->number == parport_nr[i]) {
-				cpia_pp_register(port);
-				break;
-			}
-		}
-		break;
-	}
-}
-
-static struct parport_driver cpia_pp_driver = {
-	.name = "cpia_pp",
-	.attach = cpia_pp_attach,
-	.detach = cpia_pp_detach,
-};
-
-static int __init cpia_pp_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
-	       CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER);
-
-	if(parport_nr[0] == PPCPIA_PARPORT_OFF) {
-		printk("  disabled\n");
-		return 0;
-	}
-
-	spin_lock_init( &cam_list_lock_pp );
-
-	if (parport_register_driver (&cpia_pp_driver)) {
-		LOG ("unable to register with parport\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static int __init cpia_init(void)
-{
-	if (parport[0]) {
-		/* The user gave some parameters.  Let's see what they were. */
-		if (!strncmp(parport[0], "auto", 4)) {
-			parport_nr[0] = PPCPIA_PARPORT_AUTO;
-		} else {
-			int n;
-			for (n = 0; n < PARPORT_MAX && parport[n]; n++) {
-				if (!strncmp(parport[n], "none", 4)) {
-					parport_nr[n] = PPCPIA_PARPORT_NONE;
-				} else {
-					char *ep;
-					unsigned long r = simple_strtoul(parport[n], &ep, 0);
-					if (ep != parport[n]) {
-						parport_nr[n] = r;
-					} else {
-						LOG("bad port specifier `%s'\n", parport[n]);
-						return -ENODEV;
-					}
-				}
-			}
-		}
-	}
-	return cpia_pp_init();
-}
-
-static void __exit cpia_cleanup(void)
-{
-	parport_unregister_driver(&cpia_pp_driver);
-	return;
-}
-
-module_init(cpia_init);
-module_exit(cpia_cleanup);
diff --git a/drivers/staging/cpia/cpia_usb.c b/drivers/staging/cpia/cpia_usb.c
deleted file mode 100644
index 58d193f..0000000
--- a/drivers/staging/cpia/cpia_usb.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * cpia_usb CPiA USB driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * Copyright (C) 1999        Jochen Scharrlach <Jochen.Scharrlach@schwaben.de>
- * Copyright (C) 1999, 2000  Johannes Erdfelt <johannes@erdfelt.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/usb.h>
-
-#include "cpia.h"
-
-#define USB_REQ_CPIA_GRAB_FRAME			0xC1
-#define USB_REQ_CPIA_UPLOAD_FRAME		0xC2
-#define  WAIT_FOR_NEXT_FRAME			0
-#define  FORCE_FRAME_UPLOAD			1
-
-#define FRAMES_PER_DESC		10
-#define FRAME_SIZE_PER_DESC	960	/* Shouldn't be hardcoded */
-#define CPIA_NUMSBUF		2
-#define STREAM_BUF_SIZE		(PAGE_SIZE * 4)
-#define SCRATCH_BUF_SIZE	(STREAM_BUF_SIZE * 2)
-
-struct cpia_sbuf {
-	char *data;
-	struct urb *urb;
-};
-
-#define FRAMEBUF_LEN (CPIA_MAX_FRAME_SIZE+100)
-enum framebuf_status {
-	FRAME_EMPTY,
-	FRAME_READING,
-	FRAME_READY,
-	FRAME_ERROR,
-};
-
-struct framebuf {
-	int length;
-	enum framebuf_status status;
-	u8 data[FRAMEBUF_LEN];
-	struct framebuf *next;
-};
-
-struct usb_cpia {
-	/* Device structure */
-	struct usb_device *dev;
-
-	unsigned char iface;
-	wait_queue_head_t wq_stream;
-
-	int cursbuf;		/* Current receiving sbuf */
-	struct cpia_sbuf sbuf[CPIA_NUMSBUF];		/* Double buffering */
-
-	int streaming;
-	int open;
-	int present;
-	struct framebuf *buffers[3];
-	struct framebuf *curbuff, *workbuff;
-};
-
-static int cpia_usb_open(void *privdata);
-static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
-				     void *cbdata);
-static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data);
-static int cpia_usb_streamStart(void *privdata);
-static int cpia_usb_streamStop(void *privdata);
-static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock);
-static int cpia_usb_close(void *privdata);
-
-#define ABOUT "USB driver for Vision CPiA based cameras"
-
-static struct cpia_camera_ops cpia_usb_ops = {
-	cpia_usb_open,
-	cpia_usb_registerCallback,
-	cpia_usb_transferCmd,
-	cpia_usb_streamStart,
-	cpia_usb_streamStop,
-	cpia_usb_streamRead,
-	cpia_usb_close,
-	0,
-	THIS_MODULE
-};
-
-static LIST_HEAD(cam_list);
-static spinlock_t cam_list_lock_usb;
-
-static void cpia_usb_complete(struct urb *urb)
-{
-	int i;
-	char *cdata;
-	struct usb_cpia *ucpia;
-
-	if (!urb || !urb->context)
-		return;
-
-	ucpia = (struct usb_cpia *) urb->context;
-
-	if (!ucpia->dev || !ucpia->streaming || !ucpia->present || !ucpia->open)
-		return;
-
-	if (ucpia->workbuff->status == FRAME_EMPTY) {
-		ucpia->workbuff->status = FRAME_READING;
-		ucpia->workbuff->length = 0;
-	}
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		int n = urb->iso_frame_desc[i].actual_length;
-		int st = urb->iso_frame_desc[i].status;
-
-		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-
-		if (st)
-			printk(KERN_DEBUG "cpia data error: [%d] len=%d, status=%X\n", i, n, st);
-
-		if (FRAMEBUF_LEN < ucpia->workbuff->length + n) {
-			printk(KERN_DEBUG "cpia: scratch buf overflow!scr_len: %d, n: %d\n", ucpia->workbuff->length, n);
-			return;
-		}
-
-		if (n) {
-			if ((ucpia->workbuff->length > 0) ||
-			    (0x19 == cdata[0] && 0x68 == cdata[1])) {
-				memcpy(ucpia->workbuff->data + ucpia->workbuff->length, cdata, n);
-				ucpia->workbuff->length += n;
-			} else
-				DBG("Ignoring packet!\n");
-		} else {
-			if (ucpia->workbuff->length > 4 &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-1] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-2] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-3] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-4]) {
-				ucpia->workbuff->status = FRAME_READY;
-				ucpia->curbuff = ucpia->workbuff;
-				ucpia->workbuff = ucpia->workbuff->next;
-				ucpia->workbuff->status = FRAME_EMPTY;
-				ucpia->workbuff->length = 0;
-
-				if (waitqueue_active(&ucpia->wq_stream))
-					wake_up_interruptible(&ucpia->wq_stream);
-			}
-		}
-	}
-
-	/* resubmit */
-	urb->dev = ucpia->dev;
-	if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
-		printk(KERN_ERR "%s: usb_submit_urb ret %d\n", __func__,  i);
-}
-
-static int cpia_usb_open(void *privdata)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-	struct urb *urb;
-	int ret, retval = 0, fx, err;
-
-	if (!ucpia)
-		return -EINVAL;
-
-	ucpia->sbuf[0].data = kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
-	if (!ucpia->sbuf[0].data)
-		return -EINVAL;
-
-	ucpia->sbuf[1].data = kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
-	if (!ucpia->sbuf[1].data) {
-		retval = -EINVAL;
-		goto error_0;
-	}
-
-	ret = usb_set_interface(ucpia->dev, ucpia->iface, 3);
-	if (ret < 0) {
-		printk(KERN_ERR "cpia_usb_open: usb_set_interface error (ret = %d)\n", ret);
-		retval = -EBUSY;
-		goto error_1;
-	}
-
-	ucpia->buffers[0]->status = FRAME_EMPTY;
-	ucpia->buffers[0]->length = 0;
-	ucpia->buffers[1]->status = FRAME_EMPTY;
-	ucpia->buffers[1]->length = 0;
-	ucpia->buffers[2]->status = FRAME_EMPTY;
-	ucpia->buffers[2]->length = 0;
-	ucpia->curbuff = ucpia->buffers[0];
-	ucpia->workbuff = ucpia->buffers[1];
-
-	/* We double buffer the Iso lists, and also know the polling
-	 * interval is every frame (1 == (1 << (bInterval -1))).
-	 */
-	urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-	if (!urb) {
-		printk(KERN_ERR "cpia_init_isoc: usb_alloc_urb 0\n");
-		retval = -ENOMEM;
-		goto error_1;
-	}
-
-	ucpia->sbuf[0].urb = urb;
-	urb->dev = ucpia->dev;
-	urb->context = ucpia;
-	urb->pipe = usb_rcvisocpipe(ucpia->dev, 1);
-	urb->transfer_flags = URB_ISO_ASAP;
-	urb->transfer_buffer = ucpia->sbuf[0].data;
-	urb->complete = cpia_usb_complete;
-	urb->number_of_packets = FRAMES_PER_DESC;
-	urb->interval = 1;
-	urb->transfer_buffer_length = FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
-	for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
-		urb->iso_frame_desc[fx].offset = FRAME_SIZE_PER_DESC * fx;
-		urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
-	}
-
-	urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-	if (!urb) {
-		printk(KERN_ERR "cpia_init_isoc: usb_alloc_urb 1\n");
-		retval = -ENOMEM;
-		goto error_urb0;
-	}
-
-	ucpia->sbuf[1].urb = urb;
-	urb->dev = ucpia->dev;
-	urb->context = ucpia;
-	urb->pipe = usb_rcvisocpipe(ucpia->dev, 1);
-	urb->transfer_flags = URB_ISO_ASAP;
-	urb->transfer_buffer = ucpia->sbuf[1].data;
-	urb->complete = cpia_usb_complete;
-	urb->number_of_packets = FRAMES_PER_DESC;
-	urb->interval = 1;
-	urb->transfer_buffer_length = FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
-	for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
-		urb->iso_frame_desc[fx].offset = FRAME_SIZE_PER_DESC * fx;
-		urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
-	}
-
-	/* queue the ISO urbs, and resubmit in the completion handler */
-	err = usb_submit_urb(ucpia->sbuf[0].urb, GFP_KERNEL);
-	if (err) {
-		printk(KERN_ERR "cpia_init_isoc: usb_submit_urb 0 ret %d\n",
-			err);
-		goto error_urb1;
-	}
-	err = usb_submit_urb(ucpia->sbuf[1].urb, GFP_KERNEL);
-	if (err) {
-		printk(KERN_ERR "cpia_init_isoc: usb_submit_urb 1 ret %d\n",
-			err);
-		goto error_urb1;
-	}
-
-	ucpia->streaming = 1;
-	ucpia->open = 1;
-
-	return 0;
-
-error_urb1:		/* free urb 1 */
-	usb_free_urb(ucpia->sbuf[1].urb);
-	ucpia->sbuf[1].urb = NULL;
-error_urb0:		/* free urb 0 */
-	usb_free_urb(ucpia->sbuf[0].urb);
-	ucpia->sbuf[0].urb = NULL;
-error_1:
-	kfree (ucpia->sbuf[1].data);
-	ucpia->sbuf[1].data = NULL;
-error_0:
-	kfree (ucpia->sbuf[0].data);
-	ucpia->sbuf[0].data = NULL;
-
-	return retval;
-}
-
-//
-// convenience functions
-//
-
-/****************************************************************************
- *
- *  WritePacket
- *
- ***************************************************************************/
-static int WritePacket(struct usb_device *udev, const u8 *packet, u8 *buf, size_t size)
-{
-	if (!packet)
-		return -EINVAL;
-
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			 packet[1] + (packet[0] << 8),
-			 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8),
-			 packet[4] + (packet[5] << 8), buf, size, 1000);
-}
-
-/****************************************************************************
- *
- *  ReadPacket
- *
- ***************************************************************************/
-static int ReadPacket(struct usb_device *udev, u8 *packet, u8 *buf, size_t size)
-{
-	if (!packet || size <= 0)
-		return -EINVAL;
-
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			 packet[1] + (packet[0] << 8),
-			 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8),
-			 packet[4] + (packet[5] << 8), buf, size, 1000);
-}
-
-static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data)
-{
-	int err = 0;
-	int databytes;
-	struct usb_cpia *ucpia = (struct usb_cpia *)privdata;
-	struct usb_device *udev = ucpia->dev;
-
-	if (!udev) {
-		DBG("Internal driver error: udev is NULL\n");
-		return -EINVAL;
-	}
-
-	if (!command) {
-		DBG("Internal driver error: command is NULL\n");
-		return -EINVAL;
-	}
-
-	databytes = (((int)command[7])<<8) | command[6];
-
-	if (command[0] == DATA_IN) {
-		u8 buffer[8];
-
-		if (!data) {
-			DBG("Internal driver error: data is NULL\n");
-			return -EINVAL;
-		}
-
-		err = ReadPacket(udev, command, buffer, 8);
-		if (err < 0)
-			return err;
-
-		memcpy(data, buffer, databytes);
-	} else if(command[0] == DATA_OUT)
-		WritePacket(udev, command, data, databytes);
-	else {
-		DBG("Unexpected first byte of command: %x\n", command[0]);
-		err = -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
-	void *cbdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamStart(void *privdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamStop(void *privdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-	struct framebuf *mybuff;
-
-	if (!ucpia || !ucpia->present)
-		return -1;
-
-	if (ucpia->curbuff->status != FRAME_READY)
-		interruptible_sleep_on(&ucpia->wq_stream);
-	else
-		DBG("Frame already waiting!\n");
-
-	mybuff = ucpia->curbuff;
-
-	if (!mybuff)
-		return -1;
-
-	if (mybuff->status != FRAME_READY || mybuff->length < 4) {
-		DBG("Something went wrong!\n");
-		return -1;
-	}
-
-	memcpy(frame, mybuff->data, mybuff->length);
-	mybuff->status = FRAME_EMPTY;
-
-/*   DBG("read done, %d bytes, Header: %x/%x, Footer: %x%x%x%x\n",  */
-/*       mybuff->length, frame[0], frame[1], */
-/*       frame[mybuff->length-4], frame[mybuff->length-3],  */
-/*       frame[mybuff->length-2], frame[mybuff->length-1]); */
-
-	return mybuff->length;
-}
-
-static void cpia_usb_free_resources(struct usb_cpia *ucpia, int try)
-{
-	if (!ucpia->streaming)
-		return;
-
-	ucpia->streaming = 0;
-
-	/* Set packet size to 0 */
-	if (try) {
-		int ret;
-
-		ret = usb_set_interface(ucpia->dev, ucpia->iface, 0);
-		if (ret < 0) {
-			printk(KERN_ERR "usb_set_interface error (ret = %d)\n", ret);
-			return;
-		}
-	}
-
-	/* Unschedule all of the iso td's */
-	if (ucpia->sbuf[1].urb) {
-		usb_kill_urb(ucpia->sbuf[1].urb);
-		usb_free_urb(ucpia->sbuf[1].urb);
-		ucpia->sbuf[1].urb = NULL;
-	}
-
-	kfree(ucpia->sbuf[1].data);
-	ucpia->sbuf[1].data = NULL;
-
-	if (ucpia->sbuf[0].urb) {
-		usb_kill_urb(ucpia->sbuf[0].urb);
-		usb_free_urb(ucpia->sbuf[0].urb);
-		ucpia->sbuf[0].urb = NULL;
-	}
-
-	kfree(ucpia->sbuf[0].data);
-	ucpia->sbuf[0].data = NULL;
-}
-
-static int cpia_usb_close(void *privdata)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-
-	if(!ucpia)
-		return -ENODEV;
-
-	ucpia->open = 0;
-
-	/* ucpia->present = 0 protects against trying to reset the
-	 * alt setting if camera is physically disconnected while open */
-	cpia_usb_free_resources(ucpia, ucpia->present);
-
-	return 0;
-}
-
-/* Probing and initializing */
-
-static int cpia_probe(struct usb_interface *intf,
-		      const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_cpia *ucpia;
-	struct cam_data *cam;
-	int ret;
-
-	/* A multi-config CPiA camera? */
-	if (udev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	interface = intf->cur_altsetting;
-
-	printk(KERN_INFO "USB CPiA camera found\n");
-
-	ucpia = kzalloc(sizeof(*ucpia), GFP_KERNEL);
-	if (!ucpia) {
-		printk(KERN_ERR "couldn't kmalloc cpia struct\n");
-		return -ENOMEM;
-	}
-
-	ucpia->dev = udev;
-	ucpia->iface = interface->desc.bInterfaceNumber;
-	init_waitqueue_head(&ucpia->wq_stream);
-
-	ucpia->buffers[0] = vmalloc(sizeof(*ucpia->buffers[0]));
-	if (!ucpia->buffers[0]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 0\n");
-		goto fail_alloc_0;
-	}
-
-	ucpia->buffers[1] = vmalloc(sizeof(*ucpia->buffers[1]));
-	if (!ucpia->buffers[1]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 1\n");
-		goto fail_alloc_1;
-	}
-
-	ucpia->buffers[2] = vmalloc(sizeof(*ucpia->buffers[2]));
-	if (!ucpia->buffers[2]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 2\n");
-		goto fail_alloc_2;
-	}
-
-	ucpia->buffers[0]->next = ucpia->buffers[1];
-	ucpia->buffers[1]->next = ucpia->buffers[2];
-	ucpia->buffers[2]->next = ucpia->buffers[0];
-
-	ret = usb_set_interface(udev, ucpia->iface, 0);
-	if (ret < 0) {
-		printk(KERN_ERR "cpia_probe: usb_set_interface error (ret = %d)\n", ret);
-		/* goto fail_all; */
-	}
-
-	/* Before register_camera, important */
-	ucpia->present = 1;
-
-	cam = cpia_register_camera(&cpia_usb_ops, ucpia);
-	if (!cam) {
-		LOG("failed to cpia_register_camera\n");
-		goto fail_all;
-	}
-
-	spin_lock( &cam_list_lock_usb );
-	list_add( &cam->cam_data_list, &cam_list );
-	spin_unlock( &cam_list_lock_usb );
-
-	usb_set_intfdata(intf, cam);
-	return 0;
-
-fail_all:
-	vfree(ucpia->buffers[2]);
-	ucpia->buffers[2] = NULL;
-fail_alloc_2:
-	vfree(ucpia->buffers[1]);
-	ucpia->buffers[1] = NULL;
-fail_alloc_1:
-	vfree(ucpia->buffers[0]);
-	ucpia->buffers[0] = NULL;
-fail_alloc_0:
-	kfree(ucpia);
-	return -EIO;
-}
-
-static void cpia_disconnect(struct usb_interface *intf);
-
-static struct usb_device_id cpia_id_table [] = {
-	{ USB_DEVICE(0x0553, 0x0002) },
-	{ USB_DEVICE(0x0813, 0x0001) },
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, cpia_id_table);
-MODULE_LICENSE("GPL");
-
-
-static struct usb_driver cpia_driver = {
-	.name		= "cpia",
-	.probe		= cpia_probe,
-	.disconnect	= cpia_disconnect,
-	.id_table	= cpia_id_table,
-};
-
-static void cpia_disconnect(struct usb_interface *intf)
-{
-	struct cam_data *cam = usb_get_intfdata(intf);
-	struct usb_cpia *ucpia;
-
-	usb_set_intfdata(intf, NULL);
-	if (!cam)
-		return;
-
-	ucpia = (struct usb_cpia *) cam->lowlevel_data;
-	spin_lock( &cam_list_lock_usb );
-	list_del(&cam->cam_data_list);
-	spin_unlock( &cam_list_lock_usb );
-
-	ucpia->present = 0;
-
-	cpia_unregister_camera(cam);
-	if(ucpia->open)
-		cpia_usb_close(cam->lowlevel_data);
-
-	ucpia->curbuff->status = FRAME_ERROR;
-
-	if (waitqueue_active(&ucpia->wq_stream))
-		wake_up_interruptible(&ucpia->wq_stream);
-
-	ucpia->curbuff = ucpia->workbuff = NULL;
-
-	vfree(ucpia->buffers[2]);
-	ucpia->buffers[2] = NULL;
-
-	vfree(ucpia->buffers[1]);
-	ucpia->buffers[1] = NULL;
-
-	vfree(ucpia->buffers[0]);
-	ucpia->buffers[0] = NULL;
-
-	cam->lowlevel_data = NULL;
-	kfree(ucpia);
-}
-
-static int __init usb_cpia_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
-	       CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER);
-
-	spin_lock_init(&cam_list_lock_usb);
-	return usb_register(&cpia_driver);
-}
-
-static void __exit usb_cpia_cleanup(void)
-{
-	usb_deregister(&cpia_driver);
-}
-
-
-module_init (usb_cpia_init);
-module_exit (usb_cpia_cleanup);
-
diff --git a/drivers/staging/stradis/Kconfig b/drivers/staging/stradis/Kconfig
deleted file mode 100644
index 02f0fc5..0000000
--- a/drivers/staging/stradis/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config VIDEO_STRADIS
-        tristate "Stradis 4:2:2 MPEG-2 video driver (DEPRECATED)"
-        depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS && BKL
-        help
-          Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
-          driver for PCI.  There is a product page at
-          <http://www.stradis.com/>.
diff --git a/drivers/staging/stradis/Makefile b/drivers/staging/stradis/Makefile
deleted file mode 100644
index 0f1feab..0000000
--- a/drivers/staging/stradis/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
-
-EXTRA_CFLAGS += -Idrivers/media/video
diff --git a/drivers/staging/stradis/TODO b/drivers/staging/stradis/TODO
deleted file mode 100644
index f48150f..0000000
--- a/drivers/staging/stradis/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-This is an obsolete driver for ancient stradis hardware.
-We couldn't find anyone with this hardware in order to port it to use V4L2.
-
-If nobody take care on it, the driver will be removed for 2.6.38.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c
deleted file mode 100644
index 807dd7e..0000000
--- a/drivers/staging/stradis/stradis.c
+++ /dev/null
@@ -1,2222 +0,0 @@
-/*
- * stradis.c - stradis 4:2:2 mpeg decoder driver
- *
- * Stradis 4:2:2 MPEG-2 Decoder Driver
- * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/pci.h>
-#include <linux/signal.h>
-#include <asm/io.h>
-#include <linux/ioport.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/uaccess.h>
-#include <linux/vmalloc.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-
-#include "saa7146.h"
-#include "saa7146reg.h"
-#include "ibmmpeg2.h"
-#include "saa7121.h"
-#include "cs8420.h"
-
-#define DEBUG(x)		/* debug driver */
-#undef  IDEBUG			/* debug irq handler */
-#undef  MDEBUG			/* debug memory management */
-
-#define SAA7146_MAX 6
-
-static struct saa7146 saa7146s[SAA7146_MAX];
-
-static int saa_num;		/* number of SAA7146s in use */
-
-static int video_nr = -1;
-module_param(video_nr, int, 0);
-MODULE_LICENSE("GPL");
-
-#define nDebNormal	0x00480000
-#define nDebNoInc	0x00480000
-#define nDebVideo	0xd0480000
-#define nDebAudio	0xd0400000
-#define nDebDMA		0x02c80000
-
-#define oDebNormal	0x13c80000
-#define oDebNoInc	0x13c80000
-#define oDebVideo	0xd1080000
-#define oDebAudio	0xd1080000
-#define oDebDMA		0x03080000
-
-#define NewCard		(saa->boardcfg[3])
-#define ChipControl	(saa->boardcfg[1])
-#define NTSCFirstActive	(saa->boardcfg[4])
-#define PALFirstActive	(saa->boardcfg[5])
-#define NTSCLastActive	(saa->boardcfg[54])
-#define PALLastActive	(saa->boardcfg[55])
-#define Have2MB		(saa->boardcfg[18] & 0x40)
-#define HaveCS8420	(saa->boardcfg[18] & 0x04)
-#define IBMMPEGCD20	(saa->boardcfg[18] & 0x20)
-#define HaveCS3310	(saa->boardcfg[18] & 0x01)
-#define CS3310MaxLvl	((saa->boardcfg[30] << 8) | saa->boardcfg[31])
-#define HaveCS4341	(saa->boardcfg[40] == 2)
-#define SDIType		(saa->boardcfg[27])
-#define CurrentMode	(saa->boardcfg[2])
-
-#define debNormal	(NewCard ? nDebNormal : oDebNormal)
-#define debNoInc	(NewCard ? nDebNoInc : oDebNoInc)
-#define debVideo	(NewCard ? nDebVideo : oDebVideo)
-#define debAudio	(NewCard ? nDebAudio : oDebAudio)
-#define debDMA		(NewCard ? nDebDMA : oDebDMA)
-
-#ifdef USE_RESCUE_EEPROM_SDM275
-static unsigned char rescue_eeprom[64] = {
-	0x00, 0x01, 0x04, 0x13, 0x26, 0x0f, 0x10, 0x00, 0x00, 0x00, 0x43, 0x63,
-	0x22, 0x01, 0x29, 0x15, 0x73, 0x00, 0x1f,  'd',  'e',  'c',  'x',  'l',
-	 'd',  'v',  'a', 0x02, 0x00, 0x01, 0x00, 0xcc, 0xa4, 0x63, 0x09, 0xe2,
-	0x10, 0x00, 0x0a, 0x00, 0x02, 0x02,  'd',  'e',  'c',  'x',  'l',  'a',
-	0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-};
-#endif
-
-/* ----------------------------------------------------------------------- */
-/* Hardware I2C functions */
-static void I2CWipe(struct saa7146 *saa)
-{
-	int i;
-	/* set i2c to ~=100kHz, abort transfer, clear busy */
-	saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	saawrite(0x600, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	saawrite(0x600, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-}
-
-/* read I2C */
-static int I2CRead(struct saa7146 *saa, unsigned char addr,
-		   unsigned char subaddr, int dosub)
-{
-	int i;
-
-	if (saaread(SAA7146_I2C_STATUS) & 0x3c)
-		I2CWipe(saa);
-	for (i = 0;
-		i < 1000 && (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY);
-		i++)
-		schedule();
-	if (i == 1000)
-		I2CWipe(saa);
-	if (dosub)
-		saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) |
-			((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER);
-	else
-		saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) |
-			0xf1, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	/* wait for valid data */
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR)
-		return -1;
-	if (i == 1000)
-		printk("i2c setup read timeout\n");
-	saawrite(0x41, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	/* wait for valid data */
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR)
-		return -1;
-	if (i == 1000)
-		printk("i2c read timeout\n");
-	return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff);
-}
-
-/* set both to write both bytes, reset it to write only b1 */
-
-static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1,
-		    unsigned char b2, int both)
-{
-	int i;
-	u32 data;
-
-	if (saaread(SAA7146_I2C_STATUS) & 0x3c)
-		I2CWipe(saa);
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (i == 1000)
-		I2CWipe(saa);
-	data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16);
-	if (both)
-		data |= ((b2 & 0xff) << 8) | 0xe5;
-	else
-		data |= 0xd1;
-	saawrite(data, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C,
-		 SAA7146_MC2);
-	return 0;
-}
-
-static void attach_inform(struct saa7146 *saa, int id)
-{
-	int i;
-
-	DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr,
-		id));
-	if (id == 0xa0) {	/* we have rev2 or later board, fill in info */
-		for (i = 0; i < 64; i++)
-			saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1);
-#ifdef USE_RESCUE_EEPROM_SDM275
-		if (saa->boardcfg[0] != 0) {
-			printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE "
-				"BEEN IGNORED\n", saa->nr);
-			for (i = 0; i < 64; i++)
-				saa->boardcfg[i] = rescue_eeprom[i];
-		}
-#endif
-		printk("stradis%d: config =", saa->nr);
-		for (i = 0; i < 51; i++) {
-			printk(" %02x", saa->boardcfg[i]);
-		}
-		printk("\n");
-	}
-}
-
-static void I2CBusScan(struct saa7146 *saa)
-{
-	int i;
-	for (i = 0; i < 0xff; i += 2)
-		if ((I2CRead(saa, i, 0, 0)) >= 0)
-			attach_inform(saa, i);
-}
-
-static int debiwait_maxwait;
-
-static int wait_for_debi_done(struct saa7146 *saa)
-{
-	int i;
-
-	/* wait for registers to be programmed */
-	for (i = 0; i < 100000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++)
-		saaread(SAA7146_MC2);
-	/* wait for transfer to complete */
-	for (i = 0; i < 500000 &&
-	     (saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++)
-		saaread(SAA7146_MC2);
-
-	if (i > debiwait_maxwait)
-		printk("wait-for-debi-done maxwait: %d\n",
-			debiwait_maxwait = i);
-
-	if (i == 500000)
-		return -1;
-
-	return 0;
-}
-
-static int debiwrite(struct saa7146 *saa, u32 config, int addr,
-	u32 val, int count)
-{
-	u32 cmd;
-	if (count <= 0 || count > 32764)
-		return -1;
-	if (wait_for_debi_done(saa) < 0)
-		return -1;
-	saawrite(config, SAA7146_DEBI_CONFIG);
-	if (count <= 4)		/* immediate transfer */
-		saawrite(val, SAA7146_DEBI_AD);
-	else			/* block transfer */
-		saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
-	saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND);
-	saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
-		 SAA7146_MC2);
-	return 0;
-}
-
-static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count)
-{
-	u32 result = 0;
-
-	if (count > 32764 || count <= 0)
-		return 0;
-	if (wait_for_debi_done(saa) < 0)
-		return 0;
-	saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
-	saawrite((count << 17) | 0x10000 | (addr & 0xffff),
-		 SAA7146_DEBI_COMMAND);
-	saawrite(config, SAA7146_DEBI_CONFIG);
-	saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
-		 SAA7146_MC2);
-	if (count > 4)		/* not an immediate transfer */
-		return count;
-	wait_for_debi_done(saa);
-	result = saaread(SAA7146_DEBI_AD);
-	if (count == 1)
-		result &= 0xff;
-	if (count == 2)
-		result &= 0xffff;
-	if (count == 3)
-		result &= 0xffffff;
-	return result;
-}
-
-static void do_irq_send_data(struct saa7146 *saa)
-{
-	int split, audbytes, vidbytes;
-
-	saawrite(SAA7146_PSR_PIN1, SAA7146_IER);
-	/* if special feature mode in effect, disable audio sending */
-	if (saa->playmode != VID_PLAY_NORMAL)
-		saa->audtail = saa->audhead = 0;
-	if (saa->audhead <= saa->audtail)
-		audbytes = saa->audtail - saa->audhead;
-	else
-		audbytes = 65536 - (saa->audhead - saa->audtail);
-	if (saa->vidhead <= saa->vidtail)
-		vidbytes = saa->vidtail - saa->vidhead;
-	else
-		vidbytes = 524288 - (saa->vidhead - saa->vidtail);
-	if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) {
-		saawrite(0, SAA7146_IER);
-		return;
-	}
-	/* if at least 1 block audio waiting and audio fifo isn't full */
-	if (audbytes >= 2048 && (debiread(saa, debNormal, IBM_MP2_AUD_FIFO, 2)
-			& 0xff) < 60) {
-		if (saa->audhead > saa->audtail)
-			split = 65536 - saa->audhead;
-		else
-			split = 0;
-		audbytes = 2048;
-		if (split > 0 && split < 2048) {
-			memcpy(saa->dmadebi, saa->audbuf + saa->audhead, split);
-			saa->audhead = 0;
-			audbytes -= split;
-		} else
-			split = 0;
-		memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead,
-			audbytes);
-		saa->audhead += audbytes;
-		saa->audhead &= 0xffff;
-		debiwrite(saa, debAudio, (NewCard ? IBM_MP2_AUD_FIFO :
-			IBM_MP2_AUD_FIFOW), 0, 2048);
-		wake_up_interruptible(&saa->audq);
-		/* if at least 1 block video waiting and video fifo isn't full */
-	} else if (vidbytes >= 30720 && (debiread(saa, debNormal,
-						  IBM_MP2_FIFO, 2)) < 16384) {
-		if (saa->vidhead > saa->vidtail)
-			split = 524288 - saa->vidhead;
-		else
-			split = 0;
-		vidbytes = 30720;
-		if (split > 0 && split < 30720) {
-			memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead, split);
-			saa->vidhead = 0;
-			vidbytes -= split;
-		} else
-			split = 0;
-		memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead,
-			vidbytes);
-		saa->vidhead += vidbytes;
-		saa->vidhead &= 0x7ffff;
-		debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO :
-					  IBM_MP2_FIFOW), 0, 30720);
-		wake_up_interruptible(&saa->vidq);
-	}
-	saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER);
-}
-
-static void send_osd_data(struct saa7146 *saa)
-{
-	int size = saa->osdtail - saa->osdhead;
-	if (size > 30720)
-		size = 30720;
-	/* ensure some multiple of 8 bytes is transferred */
-	size = 8 * ((size + 8) >> 3);
-	if (size) {
-		debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR,
-			  (saa->osdhead >> 3), 2);
-		memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size);
-		saa->osdhead += size;
-		/* block transfer of next 8 bytes to ~32k bytes */
-		debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size);
-	}
-	if (saa->osdhead >= saa->osdtail) {
-		saa->osdhead = saa->osdtail = 0;
-		debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-	}
-}
-
-static irqreturn_t saa7146_irq(int irq, void *dev_id)
-{
-	struct saa7146 *saa = dev_id;
-	u32 stat, astat;
-	int count;
-	int handled = 0;
-
-	count = 0;
-	while (1) {
-		/* get/clear interrupt status bits */
-		stat = saaread(SAA7146_ISR);
-		astat = stat & saaread(SAA7146_IER);
-		if (!astat)
-			break;
-		handled = 1;
-		saawrite(astat, SAA7146_ISR);
-		if (astat & SAA7146_PSR_DEBI_S) {
-			do_irq_send_data(saa);
-		}
-		if (astat & SAA7146_PSR_PIN1) {
-			int istat;
-			/* the following read will trigger DEBI_S */
-			istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-			if (istat & 1) {
-				saawrite(0, SAA7146_IER);
-				send_osd_data(saa);
-				saawrite(SAA7146_PSR_DEBI_S |
-					 SAA7146_PSR_PIN1, SAA7146_IER);
-			}
-			if (istat & 0x20) {	/* Video Start */
-				saa->vidinfo.frame_count++;
-			}
-			if (istat & 0x400) {	/* Picture Start */
-				/* update temporal reference */
-			}
-			if (istat & 0x200) {	/* Picture Resolution Change */
-				/* read new resolution */
-			}
-			if (istat & 0x100) {	/* New User Data found */
-				/* read new user data */
-			}
-			if (istat & 0x1000) {	/* new GOP/SMPTE */
-				/* read new SMPTE */
-			}
-			if (istat & 0x8000) {	/* Sequence Start Code */
-				/* reset frame counter, load sizes */
-				saa->vidinfo.frame_count = 0;
-				saa->vidinfo.h_size = 704;
-				saa->vidinfo.v_size = 480;
-#if 0
-				if (saa->endmarkhead != saa->endmarktail) {
-					saa->audhead =
-						saa->endmark[saa->endmarkhead];
-					saa->endmarkhead++;
-					if (saa->endmarkhead >= MAX_MARKS)
-						saa->endmarkhead = 0;
-				}
-#endif
-			}
-			if (istat & 0x4000) {	/* Sequence Error Code */
-				if (saa->endmarkhead != saa->endmarktail) {
-					saa->audhead =
-						saa->endmark[saa->endmarkhead];
-					saa->endmarkhead++;
-					if (saa->endmarkhead >= MAX_MARKS)
-						saa->endmarkhead = 0;
-				}
-			}
-		}
-#ifdef IDEBUG
-		if (astat & SAA7146_PSR_PPEF) {
-			IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PABO) {
-			IDEBUG(printk("stradis%d irq: PABO\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PPED) {
-			IDEBUG(printk("stradis%d irq: PPED\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_I1) {
-			IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_I0) {
-			IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_LATE1) {
-			IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_LATE0) {
-			IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_E1) {
-			IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_E0) {
-			IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_TO1) {
-			IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_TO0) {
-			IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_UPLD) {
-			IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_DEBI_E) {
-			IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_I2C_S) {
-			IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_I2C_E) {
-			IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A2_IN) {
-			IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A2_OUT) {
-			IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A1_IN) {
-			IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A1_OUT) {
-			IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_AFOU) {
-			IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_V_PE) {
-			IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_VFOU) {
-			IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_FIDA) {
-			IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_FIDB) {
-			IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN3) {
-			IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN2) {
-			IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN0) {
-			IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_ECS) {
-			IDEBUG(printk("stradis%d irq: ECS\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_EC3S) {
-			IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_EC0S) {
-			IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr));
-		}
-#endif
-		count++;
-		if (count > 15)
-			printk(KERN_WARNING "stradis%d: irq loop %d\n",
-			       saa->nr, count);
-		if (count > 20) {
-			saawrite(0, SAA7146_IER);
-			printk(KERN_ERR
-			       "stradis%d: IRQ loop cleared\n", saa->nr);
-		}
-	}
-	return IRQ_RETVAL(handled);
-}
-
-static int ibm_send_command(struct saa7146 *saa,
-			    int command, int data, int chain)
-{
-	int i;
-
-	if (chain)
-		debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1)| 1,2);
-	else
-		debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2);
-	for (i = 0; i < 100 &&
-	     (debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++)
-		schedule();
-	if (i == 100)
-		return -1;
-	return 0;
-}
-
-static void cs4341_setlevel(struct saa7146 *saa, int left, int right)
-{
-	I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2);
-	I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2);
-}
-
-static void initialize_cs4341(struct saa7146 *saa)
-{
-	int i;
-	for (i = 0; i < 200; i++) {
-		/* auto mute off, power on, no de-emphasis */
-		/* I2S data up to 24-bit 64xFs internal SCLK */
-		I2CWrite(saa, 0x22, 0x01, 0x11, 2);
-		/* ATAPI mixer settings */
-		I2CWrite(saa, 0x22, 0x02, 0x49, 2);
-		/* attenuation left 3db */
-		I2CWrite(saa, 0x22, 0x03, 0x00, 2);
-		/* attenuation right 3db */
-		I2CWrite(saa, 0x22, 0x04, 0x00, 2);
-		I2CWrite(saa, 0x22, 0x01, 0x10, 2);
-		if (I2CRead(saa, 0x22, 0x02, 1) == 0x49)
-			break;
-		schedule();
-	}
-	printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i);
-	return;
-}
-
-static void initialize_cs8420(struct saa7146 *saa, int pro)
-{
-	int i;
-	u8 *sequence;
-	if (pro)
-		sequence = mode8420pro;
-	else
-		sequence = mode8420con;
-	for (i = 0; i < INIT8420LEN; i++)
-		I2CWrite(saa, 0x20, init8420[i * 2], init8420[i * 2 + 1], 2);
-	for (i = 0; i < MODE8420LEN; i++)
-		I2CWrite(saa, 0x20, sequence[i * 2], sequence[i * 2 + 1], 2);
-	printk("stradis%d: CS8420 initialized\n", saa->nr);
-}
-
-static void initialize_saa7121(struct saa7146 *saa, int dopal)
-{
-	int i, mod;
-	u8 *sequence;
-	if (dopal)
-		sequence = init7121pal;
-	else
-		sequence = init7121ntsc;
-	mod = saaread(SAA7146_PSR) & 0x08;
-	/* initialize PAL/NTSC video encoder */
-	for (i = 0; i < INIT7121LEN; i++) {
-		if (NewCard) {	/* handle new card encoder differences */
-			if (sequence[i * 2] == 0x3a)
-				I2CWrite(saa, 0x88, 0x3a, 0x13, 2);
-			else if (sequence[i * 2] == 0x6b)
-				I2CWrite(saa, 0x88, 0x6b, 0x20, 2);
-			else if (sequence[i * 2] == 0x6c)
-				I2CWrite(saa, 0x88, 0x6c,
-					 dopal ? 0x09 : 0xf5, 2);
-			else if (sequence[i * 2] == 0x6d)
-				I2CWrite(saa, 0x88, 0x6d,
-					 dopal ? 0x20 : 0x00, 2);
-			else if (sequence[i * 2] == 0x7a)
-				I2CWrite(saa, 0x88, 0x7a,
-					 dopal ? (PALFirstActive - 1) :
-					 (NTSCFirstActive - 4), 2);
-			else if (sequence[i * 2] == 0x7b)
-				I2CWrite(saa, 0x88, 0x7b,
-					 dopal ? PALLastActive :
-					 NTSCLastActive, 2);
-			else
-				I2CWrite(saa, 0x88, sequence[i * 2],
-					 sequence[i * 2 + 1], 2);
-		} else {
-			if (sequence[i * 2] == 0x6b && mod)
-				I2CWrite(saa, 0x88, 0x6b,
-					 (sequence[i * 2 + 1] ^ 0x09), 2);
-			else if (sequence[i * 2] == 0x7a)
-				I2CWrite(saa, 0x88, 0x7a,
-					 dopal ? (PALFirstActive - 1) :
-					 (NTSCFirstActive - 4), 2);
-			else if (sequence[i * 2] == 0x7b)
-				I2CWrite(saa, 0x88, 0x7b,
-					 dopal ? PALLastActive :
-					 NTSCLastActive, 2);
-			else
-				I2CWrite(saa, 0x88, sequence[i * 2],
-					 sequence[i * 2 + 1], 2);
-		}
-	}
-}
-
-static void set_genlock_offset(struct saa7146 *saa, int noffset)
-{
-	int nCode;
-	int PixelsPerLine = 858;
-	if (CurrentMode == VIDEO_MODE_PAL)
-		PixelsPerLine = 864;
-	if (noffset > 500)
-		noffset = 500;
-	else if (noffset < -500)
-		noffset = -500;
-	nCode = noffset + 0x100;
-	if (nCode == 1)
-		nCode = 0x401;
-	else if (nCode < 1)
-		nCode = 0x400 + PixelsPerLine + nCode;
-	debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2);
-}
-
-static void set_out_format(struct saa7146 *saa, int mode)
-{
-	initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1));
-	saa->boardcfg[2] = mode;
-	/* do not adjust analog video parameters here, use saa7121 init */
-	/* you will affect the SDI output on the new card */
-	if (mode == VIDEO_MODE_PAL) {	/* PAL */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2);
-		mdelay(50);
-		saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1);
-		if (NewCard) {
-			debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, 0xe100, 2);
-			mdelay(50);
-		}
-		debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-			  NewCard ? 0xe500 : 0x6500, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
-			  (1 << 8) |
-			  (NewCard ? PALFirstActive : PALFirstActive - 6), 2);
-	} else {		/* NTSC */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2);
-		mdelay(50);
-		saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-			  NewCard ? 0xe100 : 0x6100, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
-			  (1 << 8) |
-			  (NewCard ? NTSCFirstActive : NTSCFirstActive - 6), 2);
-	}
-}
-
-/* Intialize bitmangler to map from a byte value to the mangled word that
- * must be output to program the Xilinx part through the DEBI port.
- * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
- * transfer FPGA code, init IBM chip, transfer IBM microcode
- * rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0
- */
-static u16 bitmangler[256];
-
-static int initialize_fpga(struct video_code *bitdata)
-{
-	int i, num, startindex, failure = 0, loadtwo, loadfile = 0;
-	u16 *dmabuf;
-	u8 *newdma;
-	struct saa7146 *saa;
-
-	/* verify fpga code */
-	for (startindex = 0; startindex < bitdata->datasize; startindex++)
-		if (bitdata->data[startindex] == 255)
-			break;
-	if (startindex == bitdata->datasize) {
-		printk(KERN_INFO "stradis: bad fpga code\n");
-		return -1;
-	}
-	/* initialize all detected cards */
-	for (num = 0; num < saa_num; num++) {
-		saa = &saa7146s[num];
-		if (saa->boardcfg[0] > 20)
-			continue;	/* card was programmed */
-		loadtwo = (saa->boardcfg[18] & 0x10);
-		if (!NewCard)	/* we have an old board */
-			for (i = 0; i < 256; i++)
-				bitmangler[i] = ((i & 0x01) << 15) |
-					((i & 0x02) << 6) | ((i & 0x04) << 4) |
-					((i & 0x08) << 9) | ((i & 0x10) << 7) |
-					((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
-					((i & 0x80) >> 7);
-		else		/* else we have a new board */
-			for (i = 0; i < 256; i++)
-				bitmangler[i] = ((i & 0x01) << 7) |
-					((i & 0x02) << 5) | ((i & 0x04) << 3) |
-					((i & 0x08) << 1) | ((i & 0x10) >> 1) |
-					((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
-					((i & 0x80) >> 7);
-
-		dmabuf = (u16 *) saa->dmadebi;
-		newdma = (u8 *) saa->dmadebi;
-		if (NewCard) {	/* SDM2xxx */
-			if (!strncmp(bitdata->loadwhat, "decoder2", 8))
-				continue;	/* fpga not for this card */
-			if (!strncmp(&saa->boardcfg[42], bitdata->loadwhat, 8))
-				loadfile = 1;
-			else if (loadtwo && !strncmp(&saa->boardcfg[19],
-				       bitdata->loadwhat, 8))
-				loadfile = 2;
-			else if (!saa->boardcfg[42] && !strncmp("decxl",
-					bitdata->loadwhat, 8))
-				loadfile = 1;	/* special */
-			else
-				continue;	/* fpga not for this card */
-			if (loadfile != 1 && loadfile != 2)
-				continue;	/* skip to next card */
-			if (saa->boardcfg[0] && loadfile == 1)
-				continue;	/* skip to next card */
-			if (saa->boardcfg[0] != 1 && loadfile == 2)
-				continue;	/* skip to next card */
-			saa->boardcfg[0]++;	/* mark fpga handled */
-			printk("stradis%d: loading %s\n", saa->nr,
-				bitdata->loadwhat);
-			if (loadtwo && loadfile == 2)
-				goto send_fpga_stuff;
-			/* turn on the Audio interface to set PROG low */
-			saawrite(0x00400040, SAA7146_GPIO_CTRL);
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			/* wait for everyone to reset */
-			mdelay(10);
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-		} else {	/* original card */
-			if (strncmp(bitdata->loadwhat, "decoder2", 8))
-				continue;	/* fpga not for this card */
-			/* Pull the Xilinx PROG signal WS3 low */
-			saawrite(0x02000200, SAA7146_MC1);
-			/* Turn on the Audio interface so can set PROG low */
-			saawrite(0x000000c0, SAA7146_ACON1);
-			/* Pull the Xilinx INIT signal (GPIO2) low */
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-			/* Make sure everybody resets */
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			mdelay(10);
-			/* Release the Xilinx PROG signal */
-			saawrite(0x00000000, SAA7146_ACON1);
-			/* Turn off the Audio interface */
-			saawrite(0x02000000, SAA7146_MC1);
-		}
-		/* Release Xilinx INIT signal (WS2) */
-		saawrite(0x00000000, SAA7146_GPIO_CTRL);
-		/* Wait for the INIT to go High */
-		for (i = 0;
-			i < 10000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
-			i++)
-			schedule();
-		if (i == 1000) {
-			printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr);
-			return -1;
-		}
-send_fpga_stuff:
-		if (NewCard) {
-			for (i = startindex; i < bitdata->datasize; i++)
-				newdma[i - startindex] =
-				    bitmangler[bitdata->data[i]];
-			debiwrite(saa, 0x01420000, 0, 0,
-				((bitdata->datasize - startindex) + 5));
-			if (loadtwo && loadfile == 1) {
-				printk("stradis%d: awaiting 2nd FPGA bitfile\n",
-				       saa->nr);
-				continue;	/* skip to next card */
-			}
-		} else {
-			for (i = startindex; i < bitdata->datasize; i++)
-				dmabuf[i - startindex] =
-					bitmangler[bitdata->data[i]];
-			debiwrite(saa, 0x014a0000, 0, 0,
-				((bitdata->datasize - startindex) + 5) * 2);
-		}
-		for (i = 0;
-			i < 1000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
-			i++)
-			schedule();
-		if (i == 1000) {
-			printk(KERN_INFO "stradis%d: FPGA load failed\n",
-			       saa->nr);
-			failure++;
-			continue;
-		}
-		if (!NewCard) {
-			/* Pull the Xilinx INIT signal (GPIO2) low */
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			mdelay(2);
-			saawrite(0x00000000, SAA7146_GPIO_CTRL);
-			mdelay(2);
-		}
-		printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr);
-		saa->boardcfg[0] = 26;	/* mark fpga programmed */
-		/* set VXCO to its lowest frequency */
-		debiwrite(saa, debNormal, XILINX_PWM, 0, 2);
-		if (NewCard) {
-			/* mute CS3310 */
-			if (HaveCS3310)
-				debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
-					0, 2);
-			/* set VXCO to PWM mode, release reset, blank on */
-			debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2);
-			mdelay(10);
-			/* unmute CS3310 */
-			if (HaveCS3310)
-				debiwrite(saa, debNormal, XILINX_CTL0,
-					0x2020, 2);
-		}
-		/* set source Black */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
-		saa->boardcfg[4] = 22;	/* set NTSC First Active Line */
-		saa->boardcfg[5] = 23;	/* set PAL First Active Line */
-		saa->boardcfg[54] = 2;	/* set NTSC Last Active Line - 256 */
-		saa->boardcfg[55] = 54;	/* set PAL Last Active Line - 256 */
-		set_out_format(saa, VIDEO_MODE_NTSC);
-		mdelay(50);
-		/* begin IBM chip init */
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
-		saaread(SAA7146_PSR);	/* wait for reset */
-		mdelay(5);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
-		debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
-		if (NewCard) {
-			mdelay(5);
-			/* set i2s rate converter to 48KHz */
-			debiwrite(saa, debNormal, 0x80c0, 6, 2);
-			/* we must init CS8420 first since rev b pulls i2s */
-			/* master clock low and CS4341 needs i2s master to */
-			/* run the i2c port. */
-			if (HaveCS8420)
-				/* 0=consumer, 1=pro */
-				initialize_cs8420(saa, 0);
-
-			mdelay(5);
-			if (HaveCS4341)
-				initialize_cs4341(saa);
-		}
-		debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
-		debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
-		if (NewCard)
-			set_genlock_offset(saa, 0);
-		debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
-#if 0
-		/* enable genlock */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2);
-#else
-		/* disable genlock */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2);
-#endif
-	}
-
-	return failure;
-}
-
-static int do_ibm_reset(struct saa7146 *saa)
-{
-	/* failure if decoder not previously programmed */
-	if (saa->boardcfg[0] < 37)
-		return -EIO;
-	/* mute CS3310 */
-	if (HaveCS3310)
-		debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2);
-	/* disable interrupts */
-	saawrite(0, SAA7146_IER);
-	saa->audhead = saa->audtail = 0;
-	saa->vidhead = saa->vidtail = 0;
-	/* tristate debi bus, disable debi transfers */
-	saawrite(0x00880000, SAA7146_MC1);
-	/* ensure posted write */
-	saaread(SAA7146_MC1);
-	mdelay(50);
-	/* re-enable debi transfers */
-	saawrite(0x00880088, SAA7146_MC1);
-	/* set source Black */
-	debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
-	/* begin IBM chip init */
-	set_out_format(saa, CurrentMode);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
-	saaread(SAA7146_PSR);	/* wait for reset */
-	mdelay(5);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
-	debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
-	if (NewCard) {
-		mdelay(5);
-		/* set i2s rate converter to 48KHz */
-		debiwrite(saa, debNormal, 0x80c0, 6, 2);
-		/* we must init CS8420 first since rev b pulls i2s */
-		/* master clock low and CS4341 needs i2s master to */
-		/* run the i2c port. */
-		if (HaveCS8420)
-			/* 0=consumer, 1=pro */
-			initialize_cs8420(saa, 1);
-
-		mdelay(5);
-		if (HaveCS4341)
-			initialize_cs4341(saa);
-	}
-	debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
-	debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
-	debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
-	debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
-	if (NewCard)
-		set_genlock_offset(saa, 0);
-	debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
-	debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
-	debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
-	if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
-			(ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) {
-		printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr);
-	}
-	if (HaveCS3310) {
-		int i = CS3310MaxLvl;
-		debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i << 8)| i),2);
-	}
-	/* start video decoder */
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-	/* 256k vid, 3520 bytes aud */
-	debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2);
-	debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
-	ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-	/* enable buffer threshold irq */
-	debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-	/* clear pending interrupts */
-	debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-	debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
-
-	return 0;
-}
-
-/* load the decoder microcode */
-static int initialize_ibmmpeg2(struct video_code *microcode)
-{
-	int i, num;
-	struct saa7146 *saa;
-
-	for (num = 0; num < saa_num; num++) {
-		saa = &saa7146s[num];
-		/* check that FPGA is loaded */
-		debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2);
-		i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2);
-		if (i != 0xa55a) {
-			printk(KERN_INFO "stradis%d: %04x != 0xa55a\n",
-				saa->nr, i);
-#if 0
-			return -1;
-#endif
-		}
-		if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) {
-			if (saa->boardcfg[0] > 27)
-				continue;	/* skip to next card */
-			/* load video control store */
-			saa->boardcfg[1] = 0x13;	/* no-sync default */
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
-			debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
-			for (i = 0; i < microcode->datasize / 2; i++)
-				debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA,
-					(microcode->data[i * 2] << 8) |
-					microcode->data[i * 2 + 1], 2);
-			debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-				ChipControl, 2);
-			saa->boardcfg[0] = 28;
-		}
-		if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) {
-			if (saa->boardcfg[0] > 35)
-				continue;	/* skip to next card */
-			/* load audio control store */
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
-			for (i = 0; i < microcode->datasize; i++)
-				debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA,
-					microcode->data[i], 1);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
-			if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
-					0xe000, 1)) {
-				printk(KERN_ERR "stradis%d: IBM config "
-					"failed\n", saa->nr);
-				return -1;
-			}
-			/* set PWM to center value */
-			if (NewCard) {
-				debiwrite(saa, debNormal, XILINX_PWM,
-					saa->boardcfg[14] +
-					(saa->boardcfg[13] << 8), 2);
-			} else
-				debiwrite(saa, debNormal, XILINX_PWM, 0x46, 2);
-
-			if (HaveCS3310) {
-				i = CS3310MaxLvl;
-				debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
-					(i << 8) | i, 2);
-			}
-			printk(KERN_INFO "stradis%d: IBM MPEGCD%d Inited\n",
-				saa->nr, 18 + (debiread(saa, debNormal,
-				IBM_MP2_CHIP_CONTROL, 2) >> 12));
-			/* start video decoder */
-			debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-				ChipControl, 2);
-			debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037,
-				2);	/* 256k vid, 3520 bytes aud */
-			debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
-			ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-			/* enable buffer threshold irq */
-			debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-			debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-			/* enable gpio irq */
-			saawrite(0x00002000, SAA7146_GPIO_CTRL);
-			/* enable decoder output to HPS */
-			debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
-			saa->boardcfg[0] = 37;
-		}
-	}
-
-	return 0;
-}
-
-static u32 palette2fmt[] = {	/* some of these YUV translations are wrong */
-	0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000,
-	0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000,
-	0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000
-};
-static int bpp2fmt[4] = {
-	VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24,
-	VIDEO_PALETTE_RGB32
-};
-
-/* I wish I could find a formula to calculate these... */
-static u32 h_prescale[64] = {
-	0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808,
-	0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460,
-	0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f,
-	0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000,
-	0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000,
-	0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000,
-	0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000,
-	0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000,
-	0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000,
-	0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000,
-	0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000,
-};
-static u32 v_gain[64] = {
-	0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff,
-	0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff,
-	0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-};
-
-static void saa7146_set_winsize(struct saa7146 *saa)
-{
-	u32 format;
-	int offset, yacl, ysci;
-	saa->win.color_fmt = format =
-	    (saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] :
-	    palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]];
-	offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl;
-	saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1);
-	saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1);
-	saawrite(saa->win.bpl * 2, SAA7146_PITCH1);
-	saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight,
-		 SAA7146_PROT_ADDR1);
-	saawrite(0, SAA7146_PAGE1);
-	saawrite(format | 0x60, SAA7146_CLIP_FORMAT_CTRL);
-	offset = (704 / (saa->win.width - 1)) & 0x3f;
-	saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE);
-	offset = (720896 / saa->win.width) / (offset + 1);
-	saawrite((offset << 12) | 0x0c, SAA7146_HPS_H_SCALE);
-	if (CurrentMode == VIDEO_MODE_NTSC) {
-		yacl = /*(480 / saa->win.height - 1) & 0x3f */ 0;
-		ysci = 1024 - (saa->win.height * 1024 / 480);
-	} else {
-		yacl = /*(576 / saa->win.height - 1) & 0x3f */ 0;
-		ysci = 1024 - (saa->win.height * 1024 / 576);
-	}
-	saawrite((1 << 31) | (ysci << 21) | (yacl << 15), SAA7146_HPS_V_SCALE);
-	saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN);
-	saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V |
-		SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 |
-		SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H), SAA7146_MC2);
-}
-
-/* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
- * bitmap is fixed width, 128 bytes (1024 pixels represented)
- * arranged most-sigificant-bit-left in 32-bit words
- * based on saa7146 clipping hardware, it swaps bytes if LE
- * much of this makes up for egcs brain damage -- so if you
- * are wondering "why did he do this?" it is because the C
- * was adjusted to generate the optimal asm output without
- * writing non-portable __asm__ directives.
- */
-
-static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h)
-{
-	register int startword, endword;
-	register u32 bitsleft, bitsright;
-	u32 *temp;
-	if (x < 0) {
-		w += x;
-		x = 0;
-	}
-	if (y < 0) {
-		h += y;
-		y = 0;
-	}
-	if (w <= 0 || h <= 0 || x > 1023 || y > 639)
-		return;		/* throw away bad clips */
-	if (x + w > 1024)
-		w = 1024 - x;
-	if (y + h > 640)
-		h = 640 - y;
-	startword = (x >> 5);
-	endword = ((x + w) >> 5);
-	bitsleft = (0xffffffff >> (x & 31));
-	bitsright = (0xffffffff << (~((x + w) - (endword << 5))));
-	temp = &clipmap[(y << 5) + startword];
-	w = endword - startword;
-	if (!w) {
-		bitsleft |= bitsright;
-		for (y = 0; y < h; y++) {
-			*temp |= bitsleft;
-			temp += 32;
-		}
-	} else {
-		for (y = 0; y < h; y++) {
-			*temp++ |= bitsleft;
-			for (x = 1; x < w; x++)
-				*temp++ = 0xffffffff;
-			*temp |= bitsright;
-			temp += (32 - w);
-		}
-	}
-}
-
-static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr)
-{
-	int i, width, height;
-	u32 *clipmap;
-
-	clipmap = saa->dmavid2;
-	if ((width = saa->win.width) > 1023)
-		width = 1023;	/* sanity check */
-	if ((height = saa->win.height) > 640)
-		height = 639;	/* sanity check */
-	if (ncr > 0) {		/* rectangles pased */
-		/* convert rectangular clips to a bitmap */
-		memset(clipmap, 0, VIDEO_CLIPMAP_SIZE);	/* clear map */
-		for (i = 0; i < ncr; i++)
-			clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
-				cr[i].width, cr[i].height);
-	}
-	/* clip against viewing window AND screen
-	   so we do not have to rely on the user program
-	 */
-	clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ?
-		(saa->win.swidth - saa->win.x) : width, 0, 1024, 768);
-	clip_draw_rectangle(clipmap, 0,
-		(saa->win.y + height > saa->win.sheight) ?
-		(saa->win.sheight - saa->win.y) : height, 1024, 768);
-	if (saa->win.x < 0)
-		clip_draw_rectangle(clipmap, 0, 0, -saa->win.x, 768);
-	if (saa->win.y < 0)
-		clip_draw_rectangle(clipmap, 0, 0, 1024, -saa->win.y);
-}
-
-static long saa_ioctl(struct file *file,
-		     unsigned int cmd, unsigned long argl)
-{
-	struct saa7146 *saa = file->private_data;
-	void __user *arg = (void __user *)argl;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-		{
-			struct video_capability b;
-			memset(&b, 0, sizeof(b));
-			strcpy(b.name, saa->video_dev.name);
-			b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY |
-				VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM |
-				VID_TYPE_SCALES;
-			b.channels = 1;
-			b.audios = 1;
-			b.maxwidth = 768;
-			b.maxheight = 576;
-			b.minwidth = 32;
-			b.minheight = 32;
-			if (copy_to_user(arg, &b, sizeof(b)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCGPICT:
-		{
-			struct video_picture p = saa->picture;
-			if (saa->win.depth == 8)
-				p.palette = VIDEO_PALETTE_HI240;
-			if (saa->win.depth == 15)
-				p.palette = VIDEO_PALETTE_RGB555;
-			if (saa->win.depth == 16)
-				p.palette = VIDEO_PALETTE_RGB565;
-			if (saa->win.depth == 24)
-				p.palette = VIDEO_PALETTE_RGB24;
-			if (saa->win.depth == 32)
-				p.palette = VIDEO_PALETTE_RGB32;
-			if (copy_to_user(arg, &p, sizeof(p)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSPICT:
-		{
-			struct video_picture p;
-			u32 format;
-			if (copy_from_user(&p, arg, sizeof(p)))
-				return -EFAULT;
-			if (p.palette < ARRAY_SIZE(palette2fmt)) {
-				format = palette2fmt[p.palette];
-				saa->win.color_fmt = format;
-				saawrite(format | 0x60,
-					SAA7146_CLIP_FORMAT_CTRL);
-			}
-			saawrite(((p.brightness & 0xff00) << 16) |
-				((p.contrast & 0xfe00) << 7) |
-				((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL);
-			saa->picture = p;
-			/* upload changed registers */
-			saawrite(((SAA7146_MC2_UPLD_HPS_H |
-				SAA7146_MC2_UPLD_HPS_V) << 16) |
-				SAA7146_MC2_UPLD_HPS_H |
-				SAA7146_MC2_UPLD_HPS_V, SAA7146_MC2);
-			return 0;
-		}
-	case VIDIOCSWIN:
-		{
-			struct video_window vw;
-			struct video_clip *vcp = NULL;
-
-			if (copy_from_user(&vw, arg, sizeof(vw)))
-				return -EFAULT;
-
-			/* stop capture */
-			if (vw.flags || vw.width < 16 || vw.height < 16) {
-				saawrite((SAA7146_MC1_TR_E_1 << 16),
-					SAA7146_MC1);
-				return -EINVAL;
-			}
-			/* 32-bit align start and adjust width */
-			if (saa->win.bpp < 4) {
-				int i = vw.x;
-				vw.x = (vw.x + 3) & ~3;
-				i = vw.x - i;
-				vw.width -= i;
-			}
-			saa->win.x = vw.x;
-			saa->win.y = vw.y;
-			saa->win.width = vw.width;
-			if (saa->win.width > 768)
-				saa->win.width = 768;
-			saa->win.height = vw.height;
-			if (CurrentMode == VIDEO_MODE_NTSC) {
-				if (saa->win.height > 480)
-					saa->win.height = 480;
-			} else {
-				if (saa->win.height > 576)
-					saa->win.height = 576;
-			}
-
-			/* stop capture */
-			saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1);
-			saa7146_set_winsize(saa);
-
-			/*
-			 *    Do any clips.
-			 */
-			if (vw.clipcount < 0) {
-				if (copy_from_user(saa->dmavid2, vw.clips,
-						VIDEO_CLIPMAP_SIZE))
-					return -EFAULT;
-			} else if (vw.clipcount > 16384) {
-				return -EINVAL;
-			} else if (vw.clipcount > 0) {
-				vcp = vmalloc(sizeof(struct video_clip) *
-					vw.clipcount);
-				if (vcp == NULL)
-					return -ENOMEM;
-				if (copy_from_user(vcp, vw.clips,
-						sizeof(struct video_clip) *
-						vw.clipcount)) {
-					vfree(vcp);
-					return -EFAULT;
-				}
-			} else	/* nothing clipped */
-				memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE);
-
-			make_clip_tab(saa, vcp, vw.clipcount);
-			if (vw.clipcount > 0)
-				vfree(vcp);
-
-			/* start capture & clip dma if we have an address */
-			if ((saa->cap & 3) && saa->win.vidadr != 0)
-				saawrite(((SAA7146_MC1_TR_E_1 |
-					SAA7146_MC1_TR_E_2) << 16) | 0xffff,
-					SAA7146_MC1);
-			return 0;
-		}
-	case VIDIOCGWIN:
-		{
-			struct video_window vw;
-			memset(&vw, 0, sizeof(vw));
-			vw.x = saa->win.x;
-			vw.y = saa->win.y;
-			vw.width = saa->win.width;
-			vw.height = saa->win.height;
-			vw.chromakey = 0;
-			vw.flags = 0;
-			if (copy_to_user(arg, &vw, sizeof(vw)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCCAPTURE:
-		{
-			int v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			if (v == 0) {
-				saa->cap &= ~1;
-				saawrite((SAA7146_MC1_TR_E_1 << 16),
-					SAA7146_MC1);
-			} else {
-				if (saa->win.vidadr == 0 || saa->win.width == 0
-						|| saa->win.height == 0)
-					return -EINVAL;
-				saa->cap |= 1;
-				saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff,
-					SAA7146_MC1);
-			}
-			return 0;
-		}
-	case VIDIOCGFBUF:
-		{
-			struct video_buffer v;
-			memset(&v, 0, sizeof(v));
-			v.base = (void *)saa->win.vidadr;
-			v.height = saa->win.sheight;
-			v.width = saa->win.swidth;
-			v.depth = saa->win.depth;
-			v.bytesperline = saa->win.bpl;
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-
-		}
-	case VIDIOCSFBUF:
-		{
-			struct video_buffer v;
-			if (!capable(CAP_SYS_ADMIN))
-				return -EPERM;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			if (v.depth != 8 && v.depth != 15 && v.depth != 16 &&
-			    v.depth != 24 && v.depth != 32 && v.width > 16 &&
-			    v.height > 16 && v.bytesperline > 16)
-				return -EINVAL;
-			if (v.base)
-				saa->win.vidadr = (unsigned long)v.base;
-			saa->win.sheight = v.height;
-			saa->win.swidth = v.width;
-			saa->win.bpp = ((v.depth + 7) & 0x38) / 8;
-			saa->win.depth = v.depth;
-			saa->win.bpl = v.bytesperline;
-
-			DEBUG(printk("Display at %p is %d by %d, bytedepth %d, "
-					"bpl %d\n", v.base, v.width, v.height,
-					saa->win.bpp, saa->win.bpl));
-			saa7146_set_winsize(saa);
-			return 0;
-		}
-	case VIDIOCKEY:
-		{
-			/* Will be handled higher up .. */
-			return 0;
-		}
-
-	case VIDIOCGAUDIO:
-		{
-			struct video_audio v;
-			memset(&v, 0, sizeof(v));
-			v = saa->audio_dev;
-			v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
-			v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
-			strcpy(v.name, "MPEG");
-			v.mode = VIDEO_SOUND_STEREO;
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSAUDIO:
-		{
-			struct video_audio v;
-			int i;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			i = (~(v.volume >> 8)) & 0xff;
-			if (!HaveCS4341) {
-				if (v.flags & VIDEO_AUDIO_MUTE)
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN, 0xffff, 2);
-				if (!(v.flags & VIDEO_AUDIO_MUTE))
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN, 0x0000, 2);
-				if (v.flags & VIDEO_AUDIO_VOLUME)
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN,
-						(i << 8) | i, 2);
-			} else {
-				if (v.flags & VIDEO_AUDIO_MUTE)
-					cs4341_setlevel(saa, 0xff, 0xff);
-				if (!(v.flags & VIDEO_AUDIO_MUTE))
-					cs4341_setlevel(saa, 0, 0);
-				if (v.flags & VIDEO_AUDIO_VOLUME)
-					cs4341_setlevel(saa, i, i);
-			}
-			saa->audio_dev = v;
-			return 0;
-		}
-
-	case VIDIOCGUNIT:
-		{
-			struct video_unit vu;
-			memset(&vu, 0, sizeof(vu));
-			vu.video = saa->video_dev.minor;
-			vu.vbi = VIDEO_NO_UNIT;
-			vu.radio = VIDEO_NO_UNIT;
-			vu.audio = VIDEO_NO_UNIT;
-			vu.teletext = VIDEO_NO_UNIT;
-			if (copy_to_user(arg, &vu, sizeof(vu)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSPLAYMODE:
-		{
-			struct video_play_mode pmode;
-			if (copy_from_user((void *)&pmode, arg,
-					sizeof(struct video_play_mode)))
-				return -EFAULT;
-			switch (pmode.mode) {
-			case VID_PLAY_VID_OUT_MODE:
-				if (pmode.p1 != VIDEO_MODE_NTSC &&
-						pmode.p1 != VIDEO_MODE_PAL)
-					return -EINVAL;
-				set_out_format(saa, pmode.p1);
-				return 0;
-			case VID_PLAY_GENLOCK:
-				debiwrite(saa, debNormal, XILINX_CTL0,
-					pmode.p1 ? 0x8000 : 0x8080, 2);
-				if (NewCard)
-					set_genlock_offset(saa, pmode.p2);
-				return 0;
-			case VID_PLAY_NORMAL:
-				debiwrite(saa, debNormal,
-					IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_PAUSE:
-				/* IBM removed the PAUSE command */
-				/* they say use SINGLE_FRAME now */
-			case VID_PLAY_SINGLE_FRAME:
-				ibm_send_command(saa, IBM_MP2_SINGLE_FRAME,0,0);
-				if (saa->playmode == pmode.mode) {
-					debiwrite(saa, debNormal,
-						IBM_MP2_CHIP_CONTROL,
-						ChipControl, 2);
-				}
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_FAST_FORWARD:
-				ibm_send_command(saa, IBM_MP2_FAST_FORWARD,0,0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_SLOW_MOTION:
-				ibm_send_command(saa, IBM_MP2_SLOW_MOTION,
-					pmode.p1, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_IMMEDIATE_NORMAL:
-				/* ensure transfers resume */
-				debiwrite(saa, debNormal,
-					IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_IMED_NORM_PLAY,
-					0, 0);
-				saa->playmode = VID_PLAY_NORMAL;
-				return 0;
-			case VID_PLAY_SWITCH_CHANNELS:
-				saa->audhead = saa->audtail = 0;
-				saa->vidhead = saa->vidtail = 0;
-				ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,1);
-				ibm_send_command(saa, IBM_MP2_RESET_AUD_RATE,
-					0, 1);
-				debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-					0, 2);
-				ibm_send_command(saa, IBM_MP2_CHANNEL_SWITCH,
-					0, 1);
-				debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-					ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-				saa->playmode = VID_PLAY_NORMAL;
-				return 0;
-			case VID_PLAY_FREEZE_FRAME:
-				ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_STILL_MODE:
-				ibm_send_command(saa, IBM_MP2_SET_STILL_MODE,
-					0, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_MASTER_MODE:
-				if (pmode.p1 == VID_PLAY_MASTER_NONE)
-					saa->boardcfg[1] = 0x13;
-				else if (pmode.p1 == VID_PLAY_MASTER_VIDEO)
-					saa->boardcfg[1] = 0x23;
-				else if (pmode.p1 == VID_PLAY_MASTER_AUDIO)
-					saa->boardcfg[1] = 0x43;
-				else
-					return -EINVAL;
-				debiwrite(saa, debNormal,
-					  IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				return 0;
-			case VID_PLAY_ACTIVE_SCANLINES:
-				if (CurrentMode == VIDEO_MODE_PAL) {
-					if (pmode.p1 < 1 || pmode.p2 > 625)
-						return -EINVAL;
-					saa->boardcfg[5] = pmode.p1;
-					saa->boardcfg[55] = (pmode.p1 +
-						(pmode.p2 / 2) - 1) & 0xff;
-				} else {
-					if (pmode.p1 < 4 || pmode.p2 > 525)
-						return -EINVAL;
-					saa->boardcfg[4] = pmode.p1;
-					saa->boardcfg[54] = (pmode.p1 +
-						(pmode.p2 / 2) - 4) & 0xff;
-				}
-				set_out_format(saa, CurrentMode);
-			case VID_PLAY_RESET:
-				return do_ibm_reset(saa);
-			case VID_PLAY_END_MARK:
-				if (saa->endmarktail < saa->endmarkhead) {
-					if (saa->endmarkhead -
-							saa->endmarktail < 2)
-						return -ENOSPC;
-				} else if (saa->endmarkhead <=saa->endmarktail){
-					if (saa->endmarktail - saa->endmarkhead
-							> (MAX_MARKS - 2))
-						return -ENOSPC;
-				} else
-					return -ENOSPC;
-				saa->endmark[saa->endmarktail] = saa->audtail;
-				saa->endmarktail++;
-				if (saa->endmarktail >= MAX_MARKS)
-					saa->endmarktail = 0;
-			}
-			return -EINVAL;
-		}
-	case VIDIOCSWRITEMODE:
-		{
-			int mode;
-			if (copy_from_user((void *)&mode, arg, sizeof(int)))
-				return -EFAULT;
-			if (mode == VID_WRITE_MPEG_AUD ||
-					mode == VID_WRITE_MPEG_VID ||
-					mode == VID_WRITE_CC ||
-					mode == VID_WRITE_TTX ||
-					mode == VID_WRITE_OSD) {
-				saa->writemode = mode;
-				return 0;
-			}
-			return -EINVAL;
-		}
-	case VIDIOCSMICROCODE:
-		{
-			struct video_code ucode;
-			__u8 *udata;
-			int i;
-			if (copy_from_user(&ucode, arg, sizeof(ucode)))
-				return -EFAULT;
-			if (ucode.datasize > 65536 || ucode.datasize < 1024 ||
-					strncmp(ucode.loadwhat, "dec", 3))
-				return -EINVAL;
-			if ((udata = vmalloc(ucode.datasize)) == NULL)
-				return -ENOMEM;
-			if (copy_from_user(udata, ucode.data, ucode.datasize)) {
-				vfree(udata);
-				return -EFAULT;
-			}
-			ucode.data = udata;
-			if (!strncmp(ucode.loadwhat, "decoder.aud", 11) ||
-				!strncmp(ucode.loadwhat, "decoder.vid", 11))
-				i = initialize_ibmmpeg2(&ucode);
-			else
-				i = initialize_fpga(&ucode);
-			vfree(udata);
-			if (i)
-				return -EINVAL;
-			return 0;
-
-		}
-	case VIDIOCGCHAN:	/* this makes xawtv happy */
-		{
-			struct video_channel v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			v.flags = VIDEO_VC_AUDIO;
-			v.tuners = 0;
-			v.type = VID_TYPE_MPEG_DECODER;
-			v.norm = CurrentMode;
-			strcpy(v.name, "MPEG2");
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSCHAN:	/* this makes xawtv happy */
-		{
-			struct video_channel v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			/* do nothing */
-			return 0;
-		}
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int saa_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct saa7146 *saa = file->private_data;
-	printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr);
-	return -EINVAL;
-}
-
-static ssize_t saa_read(struct file *file, char __user * buf,
-	size_t count, loff_t * ppos)
-{
-	return -EINVAL;
-}
-
-static ssize_t saa_write(struct file *file, const char __user * buf,
-	size_t count, loff_t * ppos)
-{
-	struct saa7146 *saa = file->private_data;
-	unsigned long todo = count;
-	int blocksize, split;
-	unsigned long flags;
-
-	while (todo > 0) {
-		if (saa->writemode == VID_WRITE_MPEG_AUD) {
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->audhead <= saa->audtail)
-				blocksize = 65536 -
-					(saa->audtail - saa->audhead);
-			else
-				blocksize = saa->audhead - saa->audtail;
-			spin_unlock_irqrestore(&saa->lock, flags);
-			if (blocksize < 16384) {
-				saawrite(SAA7146_PSR_DEBI_S |
-					SAA7146_PSR_PIN1, SAA7146_IER);
-				saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-				/* wait for buffer space to open */
-				interruptible_sleep_on(&saa->audq);
-			}
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->audhead <= saa->audtail) {
-				blocksize = 65536 -
-					(saa->audtail - saa->audhead);
-				split = 65536 - saa->audtail;
-			} else {
-				blocksize = saa->audhead - saa->audtail;
-				split = 65536;
-			}
-			spin_unlock_irqrestore(&saa->lock, flags);
-			blocksize--;
-			if (blocksize > todo)
-				blocksize = todo;
-			/* double check that we really have space */
-			if (!blocksize)
-				return -ENOSPC;
-			if (split < blocksize) {
-				if (copy_from_user(saa->audbuf +
-						saa->audtail, buf, split))
-					return -EFAULT;
-				buf += split;
-				todo -= split;
-				blocksize -= split;
-				saa->audtail = 0;
-			}
-			if (copy_from_user(saa->audbuf + saa->audtail, buf,
-					blocksize))
-				return -EFAULT;
-			saa->audtail += blocksize;
-			todo -= blocksize;
-			buf += blocksize;
-			saa->audtail &= 0xffff;
-		} else if (saa->writemode == VID_WRITE_MPEG_VID) {
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->vidhead <= saa->vidtail)
-				blocksize = 524288 -
-					(saa->vidtail - saa->vidhead);
-			else
-				blocksize = saa->vidhead - saa->vidtail;
-			spin_unlock_irqrestore(&saa->lock, flags);
-			if (blocksize < 65536) {
-				saawrite(SAA7146_PSR_DEBI_S |
-					SAA7146_PSR_PIN1, SAA7146_IER);
-				saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-				/* wait for buffer space to open */
-				interruptible_sleep_on(&saa->vidq);
-			}
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->vidhead <= saa->vidtail) {
-				blocksize = 524288 -
-					(saa->vidtail - saa->vidhead);
-				split = 524288 - saa->vidtail;
-			} else {
-				blocksize = saa->vidhead - saa->vidtail;
-				split = 524288;
-			}
-			spin_unlock_irqrestore(&saa->lock, flags);
-			blocksize--;
-			if (blocksize > todo)
-				blocksize = todo;
-			/* double check that we really have space */
-			if (!blocksize)
-				return -ENOSPC;
-			if (split < blocksize) {
-				if (copy_from_user(saa->vidbuf +
-						saa->vidtail, buf, split))
-					return -EFAULT;
-				buf += split;
-				todo -= split;
-				blocksize -= split;
-				saa->vidtail = 0;
-			}
-			if (copy_from_user(saa->vidbuf + saa->vidtail, buf,
-					blocksize))
-				return -EFAULT;
-			saa->vidtail += blocksize;
-			todo -= blocksize;
-			buf += blocksize;
-			saa->vidtail &= 0x7ffff;
-		} else if (saa->writemode == VID_WRITE_OSD) {
-			if (count > 131072)
-				return -ENOSPC;
-			if (copy_from_user(saa->osdbuf, buf, count))
-				return -EFAULT;
-			buf += count;
-			saa->osdhead = 0;
-			saa->osdtail = count;
-			debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2);
-			debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-				debiread(saa, debNormal,
-					IBM_MP2_DISP_MODE, 2) | 1, 2);
-			/* trigger osd data transfer */
-			saawrite(SAA7146_PSR_DEBI_S |
-				 SAA7146_PSR_PIN1, SAA7146_IER);
-			saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-		}
-	}
-	return count;
-}
-
-static int saa_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev);
-
-	lock_kernel();
-	file->private_data = saa;
-
-	saa->user++;
-	if (saa->user > 1) {
-		saa->user--;
-		unlock_kernel();
-		return 0;	/* device open already, don't reset */
-	}
-	saa->writemode = VID_WRITE_MPEG_VID;	/* default to video */
-	unlock_kernel();
-	return 0;
-}
-
-static int saa_release(struct file *file)
-{
-	struct saa7146 *saa = file->private_data;
-	saa->user--;
-
-	if (saa->user > 0)	/* still someone using device */
-		return 0;
-	saawrite(0x007f0000, SAA7146_MC1);	/* stop all overlay dma */
-	return 0;
-}
-
-static const struct v4l2_file_operations saa_fops = {
-	.owner = THIS_MODULE,
-	.open = saa_open,
-	.release = saa_release,
-	.ioctl = saa_ioctl,
-	.read = saa_read,
-	.write = saa_write,
-	.mmap = saa_mmap,
-};
-
-/* template for video_device-structure */
-static struct video_device saa_template = {
-	.name = "SAA7146A",
-	.fops = &saa_fops,
-	.release = video_device_release_empty,
-};
-
-static int __devinit configure_saa7146(struct pci_dev *pdev, int num)
-{
-	int retval;
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	saa->endmarkhead = saa->endmarktail = 0;
-	saa->win.x = saa->win.y = 0;
-	saa->win.width = saa->win.cropwidth = 720;
-	saa->win.height = saa->win.cropheight = 480;
-	saa->win.cropx = saa->win.cropy = 0;
-	saa->win.bpp = 2;
-	saa->win.depth = 16;
-	saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565];
-	saa->win.bpl = 1024 * saa->win.bpp;
-	saa->win.swidth = 1024;
-	saa->win.sheight = 768;
-	saa->picture.brightness = 32768;
-	saa->picture.contrast = 38768;
-	saa->picture.colour = 32768;
-	saa->cap = 0;
-	saa->nr = num;
-	saa->playmode = VID_PLAY_NORMAL;
-	memset(saa->boardcfg, 0, 64);	/* clear board config area */
-	saa->saa7146_mem = NULL;
-	saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in =
-	    saa->dmaa1out = saa->dmaa2in = saa->dmaa2out =
-	    saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in =
-	    saa->pagea1out = saa->pagea2in = saa->pagea2out =
-	    saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 =
-	    saa->pageRPS2 = NULL;
-	saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL;
-	saa->audhead = saa->vidtail = 0;
-
-	init_waitqueue_head(&saa->i2cq);
-	init_waitqueue_head(&saa->audq);
-	init_waitqueue_head(&saa->debiq);
-	init_waitqueue_head(&saa->vidq);
-	spin_lock_init(&saa->lock);
-
-	retval = pci_enable_device(pdev);
-	if (retval) {
-		dev_err(&pdev->dev, "%d: pci_enable_device failed!\n", num);
-		goto err;
-	}
-
-	saa->id = pdev->device;
-	saa->irq = pdev->irq;
-	saa->saa7146_adr = pci_resource_start(pdev, 0);
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &saa->revision);
-
-	saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200);
-	if (saa->saa7146_mem == NULL) {
-		dev_err(&pdev->dev, "%d: ioremap failed!\n", num);
-		retval = -EIO;
-		goto err;
-	}
-
-	memcpy(&saa->video_dev, &saa_template, sizeof(saa_template));
-	saawrite(0, SAA7146_IER);	/* turn off all interrupts */
-
-	retval = request_irq(saa->irq, saa7146_irq, IRQF_SHARED | IRQF_DISABLED,
-		"stradis", saa);
-	if (retval == -EINVAL)
-		dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num);
-	else if (retval == -EBUSY)
-		dev_err(&pdev->dev, "%d: IRQ %ld busy, change your PnP config "
-			"in BIOS\n", num, saa->irq);
-	if (retval < 0)
-		goto errio;
-
-	pci_set_master(pdev);
-	retval = video_register_device(&saa->video_dev, VFL_TYPE_GRABBER,
-		video_nr);
-	if (retval < 0) {
-		dev_err(&pdev->dev, "%d: error in registering video device!\n",
-			num);
-		goto errirq;
-	}
-
-	return 0;
-
-errirq:
-	free_irq(saa->irq, saa);
-errio:
-	iounmap(saa->saa7146_mem);
-err:
-	return retval;
-}
-
-static int __devinit init_saa7146(struct pci_dev *pdev)
-{
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	saa->user = 0;
-	/* reset the saa7146 */
-	saawrite(0xffff0000, SAA7146_MC1);
-	mdelay(5);
-	/* enable debi and i2c transfers and pins */
-	saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C |
-		   SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1);
-	/* ensure proper state of chip */
-	saawrite(0x00000000, SAA7146_PAGE1);
-	saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1);
-	saawrite(0x00000000, SAA7146_PAGE2);
-	saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2);
-	saawrite(0x00000000, SAA7146_DD1_INIT);
-	saawrite(0x00000000, SAA7146_DD1_STREAM_B);
-	saawrite(0x00000000, SAA7146_DD1_STREAM_A);
-	saawrite(0x00000000, SAA7146_BRS_CTRL);
-	saawrite(0x80400040, SAA7146_BCS_CTRL);
-	saawrite(0x0000e000 /*| (1<<29) */ , SAA7146_HPS_CTRL);
-	saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL);
-	saawrite(0x00000000, SAA7146_ACON1);
-	saawrite(0x00000000, SAA7146_ACON2);
-	saawrite(0x00000600, SAA7146_I2C_STATUS);
-	saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A |
-		SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H |
-		SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 |
-		SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff,
-		SAA7146_MC2);
-	/* setup arbitration control registers */
-	saawrite(0x1412121a, SAA7146_PCI_BT_V1);
-
-	/* allocate 32k dma buffer + 4k for page table */
-	if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) {
-		dev_err(&pdev->dev, "%d: debi kmalloc failed\n", saa->nr);
-		goto err;
-	}
-#if 0
-	saa->pagedebi = saa->dmadebi + 32768;	/* top 4k is for mmu */
-	saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE);
-	for (i = 0; i < 12; i++)	/* setup mmu page table */
-		saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096));
-#endif
-	saa->audhead = saa->vidhead = saa->osdhead = 0;
-	saa->audtail = saa->vidtail = saa->osdtail = 0;
-	if (saa->vidbuf == NULL && (saa->vidbuf = vmalloc(524288)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto err;
-	}
-	if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto errfree;
-	}
-	if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto errfree;
-	}
-	/* allocate 81920 byte buffer for clipping */
-	if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
-		dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
-		goto errfree;
-	}
-	/* setup clipping registers */
-	saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
-	saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2);
-	saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE,
-		 SAA7146_PROT_ADDR2);
-	saawrite(256, SAA7146_PITCH2);
-	saawrite(4, SAA7146_PAGE2);	/* dma direction: read, no byteswap */
-	saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2,
-		 SAA7146_MC2);
-	I2CBusScan(saa);
-
-	return 0;
-errfree:
-	vfree(saa->osdbuf);
-	vfree(saa->audbuf);
-	vfree(saa->vidbuf);
-	saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
-err:
-	return -ENOMEM;
-}
-
-static void stradis_release_saa(struct pci_dev *pdev)
-{
-	u8 command;
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	/* turn off all capturing, DMA and IRQs */
-	saawrite(0xffff0000, SAA7146_MC1);	/* reset chip */
-	saawrite(0, SAA7146_MC2);
-	saawrite(0, SAA7146_IER);
-	saawrite(0xffffffffUL, SAA7146_ISR);
-
-	/* disable PCI bus-mastering */
-	pci_read_config_byte(pdev, PCI_COMMAND, &command);
-	command &= ~PCI_COMMAND_MASTER;
-	pci_write_config_byte(pdev, PCI_COMMAND, command);
-
-	/* unmap and free memory */
-	saa->audhead = saa->audtail = saa->osdhead = 0;
-	saa->vidhead = saa->vidtail = saa->osdtail = 0;
-	vfree(saa->vidbuf);
-	vfree(saa->audbuf);
-	vfree(saa->osdbuf);
-	kfree(saa->dmavid2);
-	saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
-	saa->dmavid2 = NULL;
-	kfree(saa->dmadebi);
-	kfree(saa->dmavid1);
-	kfree(saa->dmavid3);
-	kfree(saa->dmaa1in);
-	kfree(saa->dmaa1out);
-	kfree(saa->dmaa2in);
-	kfree(saa->dmaa2out);
-	kfree(saa->dmaRPS1);
-	kfree(saa->dmaRPS2);
-	free_irq(saa->irq, saa);
-	if (saa->saa7146_mem)
-		iounmap(saa->saa7146_mem);
-	if (video_is_registered(&saa->video_dev))
-		video_unregister_device(&saa->video_dev);
-}
-
-static int __devinit stradis_probe(struct pci_dev *pdev,
-	const struct pci_device_id *ent)
-{
-	int retval = -EINVAL;
-
-	if (saa_num >= SAA7146_MAX)
-		goto err;
-
-	if (!pdev->subsystem_vendor)
-		dev_info(&pdev->dev, "%d: rev1 decoder\n", saa_num);
-	else
-		dev_info(&pdev->dev, "%d: SDM2xx found\n", saa_num);
-
-	pci_set_drvdata(pdev, &saa7146s[saa_num]);
-
-	retval = configure_saa7146(pdev, saa_num);
-	if (retval) {
-		dev_err(&pdev->dev, "%d: error in configuring\n", saa_num);
-		goto err;
-	}
-
-	if (init_saa7146(pdev) < 0) {
-		dev_err(&pdev->dev, "%d: error in initialization\n", saa_num);
-		retval = -EIO;
-		goto errrel;
-	}
-
-	saa_num++;
-
-	return 0;
-errrel:
-	stradis_release_saa(pdev);
-err:
-	return retval;
-}
-
-static void __devexit stradis_remove(struct pci_dev *pdev)
-{
-	stradis_release_saa(pdev);
-}
-
-static struct pci_device_id stradis_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146) },
-	{ 0 }
-};
-
-
-static struct pci_driver stradis_driver = {
-	.name = "stradis",
-	.id_table = stradis_pci_tbl,
-	.probe = stradis_probe,
-	.remove = __devexit_p(stradis_remove)
-};
-
-static int __init stradis_init(void)
-{
-	int retval;
-
-	saa_num = 0;
-
-	retval = pci_register_driver(&stradis_driver);
-	if (retval)
-		printk(KERN_ERR "stradis: Unable to register pci driver.\n");
-
-	return retval;
-}
-
-static void __exit stradis_exit(void)
-{
-	pci_unregister_driver(&stradis_driver);
-	printk(KERN_INFO "stradis: module cleanup complete\n");
-}
-
-module_init(stradis_init);
-module_exit(stradis_exit);