summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorTrond Myklebust <Trond.Myklebust@netapp.com>2007-05-16 16:50:37 -0400
committerTrond Myklebust <Trond.Myklebust@netapp.com>2007-05-16 16:50:37 -0400
commit55d3ecab2d16be3525ba24a96ba3a67692af1f09 (patch)
tree7e81977adbd73e154f53861d8577d3ab92611c8c
parent6684e323a236d40461f27d36b38c6b70aabc9e71 (diff)
parent7b104bcb8e460e45a1aebe3da9b86aacdb4cab12 (diff)
downloadop-kernel-dev-55d3ecab2d16be3525ba24a96ba3a67692af1f09.zip
op-kernel-dev-55d3ecab2d16be3525ba24a96ba3a67692af1f09.tar.gz
Merge branch 'master' of /home/trondmy/kernel/linux-2.6/
-rw-r--r--arch/arm/kernel/stacktrace.c2
-rw-r--r--arch/i386/mm/discontig.c9
-rw-r--r--arch/sh64/Kconfig3
-rw-r--r--arch/sh64/configs/cayman_defconfig199
-rw-r--r--arch/sh64/kernel/entry.S4
-rw-r--r--arch/sh64/kernel/irq.c4
-rw-r--r--arch/sh64/kernel/pci_sh5.c17
-rw-r--r--arch/sh64/kernel/pci_sh5.h2
-rw-r--r--arch/sh64/kernel/process.c2
-rw-r--r--arch/sh64/kernel/signal.c33
-rw-r--r--arch/sh64/kernel/syscalls.S36
-rw-r--r--arch/sh64/kernel/time.c18
-rw-r--r--arch/sh64/lib/.gitignore1
-rw-r--r--arch/sh64/mach-cayman/irq.c4
-rw-r--r--arch/sh64/mach-cayman/setup.c2
-rw-r--r--arch/sh64/mm/fault.c2
-rw-r--r--arch/sh64/mm/init.c2
-rw-r--r--arch/sh64/mm/tlbmiss.c4
-rw-r--r--arch/um/include/sysdep-x86_64/kernel-offsets.h9
-rw-r--r--arch/um/include/sysdep-x86_64/syscalls.h3
-rw-r--r--arch/um/sys-x86_64/syscall_table.c5
-rw-r--r--drivers/firewire/fw-ohci.c1
-rw-r--r--drivers/ide/Kconfig15
-rw-r--r--drivers/ide/cris/ide-cris.c14
-rw-r--r--drivers/ide/ide-dma.c53
-rw-r--r--drivers/ide/ide-io.c1
-rw-r--r--drivers/ide/ide-lib.c12
-rw-r--r--drivers/ide/ide.c1
-rw-r--r--drivers/ide/pci/alim15x3.c69
-rw-r--r--drivers/ide/pci/cmd64x.c15
-rw-r--r--drivers/ide/pci/cs5530.c160
-rw-r--r--drivers/ide/pci/it821x.c21
-rw-r--r--drivers/ide/pci/pdc202xx_new.c29
-rw-r--r--drivers/ide/pci/pdc202xx_old.c184
-rw-r--r--drivers/ide/pci/sc1200.c161
-rw-r--r--drivers/ide/pci/scc_pata.c22
-rw-r--r--drivers/ide/pci/serverworks.c77
-rw-r--r--drivers/ide/pci/siimage.c24
-rw-r--r--drivers/ide/pci/sis5513.c85
-rw-r--r--drivers/ide/pci/sl82c105.c76
-rw-r--r--drivers/input/joystick/Kconfig1
-rw-r--r--drivers/input/misc/Kconfig5
-rw-r--r--drivers/input/mouse/Kconfig1
-rw-r--r--drivers/input/tablet/Kconfig4
-rw-r--r--drivers/input/touchscreen/Kconfig1
-rw-r--r--drivers/media/video/em28xx/Kconfig2
-rw-r--r--drivers/media/video/ivtv/Kconfig2
-rw-r--r--drivers/net/mlx4/alloc.c1
-rw-r--r--drivers/net/mlx4/eq.c1
-rw-r--r--drivers/net/mlx4/icm.c1
-rw-r--r--drivers/net/mlx4/reset.c1
-rw-r--r--drivers/net/pasemi_mac.c45
-rw-r--r--drivers/net/pasemi_mac.h4
-rw-r--r--drivers/net/smc911x.c6
-rw-r--r--drivers/net/ucc_geth.c40
-rw-r--r--drivers/net/ucc_geth_mii.c9
-rw-r--r--drivers/net/ucc_geth_mii.h10
-rw-r--r--drivers/pci/hotplug/rpadlpar_sysfs.c5
-rw-r--r--include/asm-m32r/system.h3
-rw-r--r--include/asm-sh64/dma-mapping.h14
-rw-r--r--include/asm-sh64/irq_regs.h1
-rw-r--r--include/asm-sh64/pgalloc.h100
-rw-r--r--include/asm-sh64/sci.h1
-rw-r--r--include/asm-sh64/thread_info.h6
-rw-r--r--include/asm-sh64/unistd.h43
-rw-r--r--include/linux/ide.h3
-rw-r--r--kernel/auditfilter.c2
-rw-r--r--mm/Kconfig2
68 files changed, 739 insertions, 956 deletions
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 398d0c0..8b63ad8 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -1,3 +1,4 @@
+#include <linux/module.h>
#include <linux/sched.h>
#include <linux/stacktrace.h>
@@ -30,6 +31,7 @@ int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
return 0;
}
+EXPORT_SYMBOL(walk_stackframe);
#ifdef CONFIG_STACKTRACE
struct stack_trace_data {
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index aa58720..860e912 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/pfn.h>
+#include <linux/swap.h>
#include <asm/e820.h>
#include <asm/setup.h>
@@ -97,14 +98,8 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
#endif
extern unsigned long find_max_low_pfn(void);
-extern void find_max_pfn(void);
extern void add_one_highpage_init(struct page *, int, int);
-
-extern struct e820map e820;
extern unsigned long highend_pfn, highstart_pfn;
-extern unsigned long max_low_pfn;
-extern unsigned long totalram_pages;
-extern unsigned long totalhigh_pages;
#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
@@ -360,7 +355,9 @@ void __init zone_sizes_init(void)
max_zone_pfns[ZONE_DMA] =
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+#endif
/* If SRAT has not registered memory, register it now */
if (find_max_pfn_with_active_regions() == 0) {
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
index e14b533..ff65420 100644
--- a/arch/sh64/Kconfig
+++ b/arch/sh64/Kconfig
@@ -17,6 +17,9 @@ config MMU
bool
default y
+config QUICKLIST
+ def_bool y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff --git a/arch/sh64/configs/cayman_defconfig b/arch/sh64/configs/cayman_defconfig
index d81df57..ed035084 100644
--- a/arch/sh64/configs/cayman_defconfig
+++ b/arch/sh64/configs/cayman_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 13:30:51 2006
+# Linux kernel version: 2.6.22-rc1
+# Mon May 14 08:43:31 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
@@ -10,6 +10,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -33,13 +35,15 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -49,14 +53,19 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -135,7 +144,7 @@ CONFIG_SH64_ID2815_WORKAROUND=y
#
CONFIG_HEARTBEAT=y
CONFIG_HDSP253_LED=y
-CONFIG_SH_DMA=y
+# CONFIG_SH_DMA is not set
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -146,23 +155,20 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
@@ -180,13 +186,13 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -207,11 +213,13 @@ CONFIG_IP_PNP=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
@@ -256,7 +264,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -269,16 +286,13 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -289,6 +303,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -306,11 +321,18 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+
+#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
@@ -320,6 +342,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -339,6 +362,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
@@ -378,18 +402,16 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
#
@@ -408,6 +430,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
@@ -428,10 +451,6 @@ CONFIG_NETDEVICES=y
# ARCnet devices
#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -479,10 +498,8 @@ CONFIG_NET_PCI=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
@@ -498,14 +515,16 @@ CONFIG_NET_PCI=y
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
@@ -513,13 +532,10 @@ CONFIG_NET_PCI=y
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -571,9 +587,17 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -619,10 +643,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -639,13 +659,8 @@ CONFIG_WATCHDOG=y
# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -653,11 +668,7 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -669,44 +680,60 @@ CONFIG_HW_RANDOM=y
#
# Dallas's 1-wire bus
#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
@@ -720,13 +747,17 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -746,10 +777,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -757,7 +784,6 @@ CONFIG_LOGO=y
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -765,6 +791,12 @@ CONFIG_LOGO_SUPERH_CLUT224=y
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -780,10 +812,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -836,6 +864,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -843,6 +872,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
@@ -912,6 +942,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -941,6 +972,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
@@ -948,6 +980,11 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -959,28 +996,29 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
@@ -1004,10 +1042,15 @@ CONFIG_SH64_SR_WATCH=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/sh64/kernel/entry.S b/arch/sh64/kernel/entry.S
index 40d4534..7013fcb 100644
--- a/arch/sh64/kernel/entry.S
+++ b/arch/sh64/kernel/entry.S
@@ -947,14 +947,14 @@ ret_with_reschedule:
! FIXME:!!!
! no handling of TIF_SYSCALL_TRACE yet!!
- movi (1 << TIF_NEED_RESCHED), r8
+ movi _TIF_NEED_RESCHED, r8
and r8, r7, r8
pta work_resched, tr0
bne r8, ZERO, tr0
pta restore_all, tr1
- movi (1 << TIF_SIGPENDING), r8
+ movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8
and r8, r7, r8
pta work_notifysig, tr0
bne r8, ZERO, tr0
diff --git a/arch/sh64/kernel/irq.c b/arch/sh64/kernel/irq.c
index f68b4f6..9412b71 100644
--- a/arch/sh64/kernel/irq.c
+++ b/arch/sh64/kernel/irq.c
@@ -94,6 +94,7 @@ asmlinkage void do_NMI(unsigned long vector_num, struct pt_regs * regs)
*/
asmlinkage int do_IRQ(unsigned long vector_num, struct pt_regs * regs)
{
+ struct pt_regs *old_regs = set_irq_regs(regs);
int irq;
irq_enter();
@@ -101,13 +102,14 @@ asmlinkage int do_IRQ(unsigned long vector_num, struct pt_regs * regs)
irq = irq_demux(vector_num);
if (irq >= 0) {
- __do_IRQ(irq, regs);
+ __do_IRQ(irq);
} else {
printk("unexpected IRQ trap at vector %03lx\n", vector_num);
}
irq_exit();
+ set_irq_regs(old_regs);
return 1;
}
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
index 49862e1..fb51660 100644
--- a/arch/sh64/kernel/pci_sh5.c
+++ b/arch/sh64/kernel/pci_sh5.c
@@ -340,8 +340,9 @@ static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
return result;
}
-irqreturn_t pcish5_err_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
{
+ struct pt_regs *regs = get_irq_regs();
unsigned pci_int, pci_air, pci_cir, pci_aint;
pci_int = SH5PCI_READ(INT);
@@ -368,15 +369,13 @@ irqreturn_t pcish5_err_irq(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
-irqreturn_t pcish5_serr_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
{
printk("SERR IRQ\n");
return IRQ_NONE;
}
-#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
static void __init
pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
struct resource *memr)
@@ -433,8 +432,8 @@ pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
mem_res.end -= mem_res.start;
/* Align the sizes up by bridge rules */
- io_res.end = ROUND_UP(io_res.end, 4*1024) - 1;
- mem_res.end = ROUND_UP(mem_res.end, 1*1024*1024) - 1;
+ io_res.end = ALIGN(io_res.end, 4*1024) - 1;
+ mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
/* Adjust the bridge's allocation requirements */
bridge->resource[0].end = bridge->resource[0].start + io_res.end;
@@ -447,18 +446,16 @@ pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
/* adjust parent's resource requirements */
if (ior) {
- ior->end = ROUND_UP(ior->end, 4*1024);
+ ior->end = ALIGN(ior->end, 4*1024);
ior->end += io_res.end;
}
if (memr) {
- memr->end = ROUND_UP(memr->end, 1*1024*1024);
+ memr->end = ALIGN(memr->end, 1*1024*1024);
memr->end += mem_res.end;
}
}
-#undef ROUND_UP
-
static void __init pcibios_size_bridges(void)
{
struct resource io_res, mem_res;
diff --git a/arch/sh64/kernel/pci_sh5.h b/arch/sh64/kernel/pci_sh5.h
index 8f21f5d..c71159d 100644
--- a/arch/sh64/kernel/pci_sh5.h
+++ b/arch/sh64/kernel/pci_sh5.h
@@ -4,7 +4,7 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * Defintions for the SH5 PCI hardware.
+ * Definitions for the SH5 PCI hardware.
*/
/* Product ID */
diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c
index 525d0ec..1b89c9d 100644
--- a/arch/sh64/kernel/process.c
+++ b/arch/sh64/kernel/process.c
@@ -387,7 +387,7 @@ ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
* NOTE! Only a kernel-only process(ie the swapper or direct descendants
* who haven't done an "execve()") should use this: it will work within
* a system call from a "real" process, but the process memory space will
- * not be free'd until both the parent and the child have exited.
+ * not be freed until both the parent and the child have exited.
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c
index b76bdfa..c8525ad 100644
--- a/arch/sh64/kernel/signal.c
+++ b/arch/sh64/kernel/signal.c
@@ -698,7 +698,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else if (!oldset)
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, 0);
@@ -706,6 +708,15 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(signr, &info, &ka, oldset, regs);
+
+ /*
+ * If a signal was successfully delivered, the saved sigmask
+ * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
+ * flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+
return 1;
}
@@ -713,13 +724,27 @@ no_signal:
/* Did we come from a system call? */
if (regs->syscall_nr >= 0) {
/* Restart the system call - no handlers present */
- if (regs->regs[REG_RET] == -ERESTARTNOHAND ||
- regs->regs[REG_RET] == -ERESTARTSYS ||
- regs->regs[REG_RET] == -ERESTARTNOINTR) {
+ switch (regs->regs[REG_RET]) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
/* Decode Syscall # */
regs->regs[REG_RET] = regs->syscall_nr;
regs->pc -= 4;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->regs[REG_RET] = __NR_restart_syscall;
+ regs->pc -= 4;
+ break;
}
}
+
+ /* No signal to deliver -- put the saved sigmask back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+
return 0;
}
diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S
index c0079d5..a5c680d 100644
--- a/arch/sh64/kernel/syscalls.S
+++ b/arch/sh64/kernel/syscalls.S
@@ -2,7 +2,7 @@
* arch/sh64/kernel/syscalls.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004 - 2007 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -20,7 +20,7 @@
*/
.globl sys_call_table
sys_call_table:
- .long sys_ni_syscall /* 0 - old "setup()" system call */
+ .long sys_restart_syscall /* 0 - old "setup()" system call */
.long sys_exit
.long sys_fork
.long sys_read
@@ -347,4 +347,34 @@ sys_call_table:
.long sys_inotify_init
.long sys_inotify_add_watch
.long sys_inotify_rm_watch /* 320 */
-
+ .long sys_ni_syscall
+ .long sys_migrate_pages
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat /* 325 */
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat /* 330 */
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat /* 335 */
+ .long sys_pselect6
+ .long sys_ppoll
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list /* 340 */
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages /* 345 */
+ .long sys_getcpu
+ .long sys_epoll_pwait
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd /* 350 */
+ .long sys_eventfd
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index 390b40d..b37f4f4 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -123,7 +123,7 @@ static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
/* Estimate number of microseconds that have elapsed since the last timer tick,
- by scaling the delta that has occured in the CTC register.
+ by scaling the delta that has occurred in the CTC register.
WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
@@ -282,7 +282,7 @@ static long last_rtc_update = 0;
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+static inline void do_timer_interrupt(void)
{
unsigned long long current_ctc;
asm ("getcon cr62, %0" : "=r" (current_ctc));
@@ -290,9 +290,10 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
do_timer(1);
#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
+ update_process_times(user_mode(get_irq_regs()));
#endif
- profile_tick(CPU_PROFILING, regs);
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
{
@@ -323,7 +324,7 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
* Time Stamp Counter value at the time of the timer interrupt, so that
* we later on can estimate the time of day more exactly.
*/
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
unsigned long timer_status;
@@ -340,7 +341,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
* locally disabled. -arca
*/
write_lock(&xtime_lock);
- do_timer_interrupt(irq, regs);
+ do_timer_interrupt();
write_unlock(&xtime_lock);
return IRQ_HANDLED;
@@ -465,9 +466,10 @@ static __init unsigned int get_cpu_hz(void)
#endif
}
-static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
{
+ struct pt_regs *regs = get_irq_regs();
+
ctrl_outb(0, RCR1); /* Disable Carry Interrupts */
regs->regs[3] = 1; /* Using r3 */
diff --git a/arch/sh64/lib/.gitignore b/arch/sh64/lib/.gitignore
new file mode 100644
index 0000000..3508c2c
--- /dev/null
+++ b/arch/sh64/lib/.gitignore
@@ -0,0 +1 @@
+syscalltab.h
diff --git a/arch/sh64/mach-cayman/irq.c b/arch/sh64/mach-cayman/irq.c
index 228ce61..aaad36d 100644
--- a/arch/sh64/mach-cayman/irq.c
+++ b/arch/sh64/mach-cayman/irq.c
@@ -29,13 +29,13 @@ unsigned long epld_virt;
/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
the same SH-5 interrupt */
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
{
printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
return IRQ_NONE;
}
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
{
printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
return IRQ_NONE;
diff --git a/arch/sh64/mach-cayman/setup.c b/arch/sh64/mach-cayman/setup.c
index 3ed87cd..c3611cc 100644
--- a/arch/sh64/mach-cayman/setup.c
+++ b/arch/sh64/mach-cayman/setup.c
@@ -213,7 +213,7 @@ static int __init smsc_superio_setup(void)
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
#endif
- /* Exit the configuraton state */
+ /* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
diff --git a/arch/sh64/mm/fault.c b/arch/sh64/mm/fault.c
index 4dd8ee8..3cd93ba 100644
--- a/arch/sh64/mm/fault.c
+++ b/arch/sh64/mm/fault.c
@@ -135,7 +135,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
/* SIM
* Note this is now called with interrupts still disabled
* This is to cope with being called for a missing IO port
- * address with interupts disabled. This should be fixed as
+ * address with interrupts disabled. This should be fixed as
* soon as we have a better 'fast path' miss handler.
*
* Plus take care how you try and debug this stuff.
diff --git a/arch/sh64/mm/init.c b/arch/sh64/mm/init.c
index 5dc0878..559717f 100644
--- a/arch/sh64/mm/init.c
+++ b/arch/sh64/mm/init.c
@@ -84,7 +84,7 @@ void show_mem(void)
printk("%d reserved pages\n",reserved);
printk("%d pages shared\n",shared);
printk("%d pages swap cached\n",cached);
- printk("%ld pages in page table cache\n",pgtable_cache_size);
+ printk("%ld pages in page table cache\n", quicklist_total_size());
}
/*
diff --git a/arch/sh64/mm/tlbmiss.c b/arch/sh64/mm/tlbmiss.c
index d4c5334..b767d6c 100644
--- a/arch/sh64/mm/tlbmiss.c
+++ b/arch/sh64/mm/tlbmiss.c
@@ -14,7 +14,7 @@
* IMPORTANT NOTES :
* The do_fast_page_fault function is called from a context in entry.S where very few registers
* have been saved. In particular, the code in this file must be compiled not to use ANY
- * caller-save regiseters that are not part of the restricted save set. Also, it means that
+ * caller-save registers that are not part of the restricted save set. Also, it means that
* code in this file must not make calls to functions elsewhere in the kernel, or else the
* excepting context will see corruption in its caller-save registers. Plus, the entry.S save
* area is non-reentrant, so this code has to run with SR.BL==1, i.e. no interrupts taken inside
@@ -249,7 +249,7 @@ asmlinkage int do_fast_page_fault(unsigned long long ssr_md, unsigned long long
/* SIM
* Note this is now called with interrupts still disabled
* This is to cope with being called for a missing IO port
- * address with interupts disabled. This should be fixed as
+ * address with interrupts disabled. This should be fixed as
* soon as we have a better 'fast path' miss handler.
*
* Plus take care how you try and debug this stuff.
diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/include/sysdep-x86_64/kernel-offsets.h
index a307237..c978b58 100644
--- a/arch/um/include/sysdep-x86_64/kernel-offsets.h
+++ b/arch/um/include/sysdep-x86_64/kernel-offsets.h
@@ -17,7 +17,16 @@
#define OFFSET(sym, str, mem) \
DEFINE(sym, offsetof(struct str, mem));
+#define __NO_STUBS 1
+#undef __SYSCALL
+#undef _ASM_X86_64_UNISTD_H_
+#define __SYSCALL(nr, sym) [nr] = 1,
+static char syscalls[] = {
+#include <asm/arch/unistd.h>
+};
+
void foo(void)
{
#include <common-offsets.h>
+DEFINE(UM_NR_syscall_max, sizeof(syscalls) - 1);
}
diff --git a/arch/um/include/sysdep-x86_64/syscalls.h b/arch/um/include/sysdep-x86_64/syscalls.h
index 5e86aa0..cf72256 100644
--- a/arch/um/include/sysdep-x86_64/syscalls.h
+++ b/arch/um/include/sysdep-x86_64/syscalls.h
@@ -9,6 +9,7 @@
#include <linux/msg.h>
#include <linux/shm.h>
+#include <kern_constants.h>
typedef long syscall_handler_t(void);
@@ -29,6 +30,6 @@ extern long old_mmap(unsigned long addr, unsigned long len,
extern syscall_handler_t sys_modify_ldt;
extern syscall_handler_t sys_arch_prctl;
-#define NR_syscalls (__NR_syscall_max + 1)
+#define NR_syscalls (UM_NR_syscall_max + 1)
#endif
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index 9e9ad72..5133988 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -4,6 +4,7 @@
#include <linux/linkage.h>
#include <linux/sys.h>
#include <linux/cache.h>
+#include <kern_constants.h>
#define __NO_STUBS
@@ -45,8 +46,8 @@ typedef void (*sys_call_ptr_t)(void);
extern void sys_ni_syscall(void);
-sys_call_ptr_t sys_call_table[__NR_syscall_max+1] __cacheline_aligned = {
+sys_call_ptr_t sys_call_table[UM_NR_syscall_max+1] __cacheline_aligned = {
/* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */
- [0 ... __NR_syscall_max] = &sys_ni_syscall,
+ [0 ... UM_NR_syscall_max] = &sys_ni_syscall,
#include <asm-x86_64/unistd.h>
};
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 1f5c704..c17342d 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -26,6 +26,7 @@
#include <linux/delay.h>
#include <linux/poll.h>
#include <linux/dma-mapping.h>
+#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9040809..b1a9b81 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -4,13 +4,10 @@
# Andre Hedrick <andre@linux-ide.org>
#
-if BLOCK
-
-menu "ATA/ATAPI/MFM/RLL support"
- depends on HAS_IOMEM
-
-config IDE
+menuconfig IDE
tristate "ATA/ATAPI/MFM/RLL support"
+ depends on BLOCK
+ depends on HAS_IOMEM
---help---
If you say Y here, your kernel will be able to manage low cost mass
storage units such as ATA/(E)IDE and ATAPI units. The most common
@@ -1099,8 +1096,4 @@ config BLK_DEV_HD_ONLY
config BLK_DEV_HD
def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY
-endif
-
-endmenu
-
-endif
+endif # IDE
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index c04cb25..ca0341c 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1002,18 +1002,6 @@ static int cris_ide_build_dmatable (ide_drive_t *drive)
return 1; /* let the PIO routines handle this weirdness */
}
-static int cris_config_drive_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- speed_cris_ide(drive, speed);
-
- return ide_dma_enable(drive);
-}
-
/*
* cris_dma_intr() is the handler for disk read/write DMA interrupts
*/
@@ -1043,7 +1031,7 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive)
static int cris_dma_check(ide_drive_t *drive)
{
- if (ide_use_dma(drive) && cris_config_drive_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
return -1;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 5fe8519..b77b7d1 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -670,41 +670,6 @@ int __ide_dma_good_drive (ide_drive_t *drive)
EXPORT_SYMBOL(__ide_dma_good_drive);
-int ide_use_dma(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = drive->hwif;
-
- if ((id->capability & 1) == 0 || drive->autodma == 0)
- return 0;
-
- /* consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- return 0;
-
- /* capable of UltraDMA modes */
- if (id->field_valid & 4) {
- if (hwif->ultra_mask & id->dma_ultra)
- return 1;
- }
-
- /* capable of regular DMA modes */
- if (id->field_valid & 2) {
- if (hwif->mwdma_mask & id->dma_mword)
- return 1;
- if (hwif->swdma_mask & id->dma_1word)
- return 1;
- }
-
- /* consult the list of known "good" drives */
- if (__ide_dma_good_drive(drive) && id->eide_dma_time < 150)
- return 1;
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ide_use_dma);
-
static const u8 xfer_mode_bases[] = {
XFER_UDMA_0,
XFER_MW_DMA_0,
@@ -731,10 +696,12 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
mask &= 0x07;
break;
case XFER_MW_DMA_0:
- mask = id->dma_mword & hwif->mwdma_mask;
+ if (id->field_valid & 2)
+ mask = id->dma_mword & hwif->mwdma_mask;
break;
case XFER_SW_DMA_0:
- mask = id->dma_1word & hwif->swdma_mask;
+ if (id->field_valid & 2)
+ mask = id->dma_1word & hwif->swdma_mask;
break;
default:
BUG();
@@ -783,8 +750,11 @@ int ide_tune_dma(ide_drive_t *drive)
{
u8 speed;
- /* TODO: use only ide_max_dma_mode() */
- if (!ide_use_dma(drive))
+ if ((drive->id->capability & 1) == 0 || drive->autodma == 0)
+ return 0;
+
+ /* consult the list of known "bad" drives */
+ if (__ide_dma_bad_drive(drive))
return 0;
speed = ide_max_dma_mode(drive);
@@ -792,9 +762,10 @@ int ide_tune_dma(ide_drive_t *drive)
if (!speed)
return 0;
- drive->hwif->speedproc(drive, speed);
+ if (drive->hwif->speedproc(drive, speed))
+ return 0;
- return ide_dma_enable(drive);
+ return 1;
}
EXPORT_SYMBOL_GPL(ide_tune_dma);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 8e56814..bfe8f1b 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -223,6 +223,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
break;
if (drive->hwif->ide_dma_check == NULL)
break;
+ drive->hwif->dma_off_quietly(drive);
ide_set_dma(drive);
break;
}
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 3be3c69..074bb32 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -111,18 +111,6 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
EXPORT_SYMBOL(ide_rate_filter);
-int ide_dma_enable (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
- return ((int) ((((id->dma_ultra >> 8) & hwif->ultra_mask) ||
- ((id->dma_mword >> 8) & hwif->mwdma_mask) ||
- ((id->dma_1word >> 8) & hwif->swdma_mask)) ? 1 : 0));
-}
-
-EXPORT_SYMBOL(ide_dma_enable);
-
int ide_use_fast_pio(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index f2b547f..6002713 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -910,6 +910,7 @@ int set_using_dma(ide_drive_t *drive, int arg)
err = 0;
if (arg) {
+ hwif->dma_off_quietly(drive);
if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
err = -EIO;
} else
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 428efda..27525ec 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -455,28 +455,6 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return (ide_config_drive_speed(drive, speed));
}
-
-/**
- * config_chipset_for_dma - set up DMA mode
- * @drive: drive to configure for
- *
- * Place a drive into DMA mode and tune the chipset for
- * the selected speed.
- *
- * Returns true if DMA mode can be used
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!(speed))
- return 0;
-
- (void) ali15x3_tune_chipset(drive, speed);
- return ide_dma_enable(drive);
-}
-
/**
* ali15x3_config_drive_for_dma - configure for DMA
* @drive: drive to configure
@@ -487,48 +465,14 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int ali15x3_config_drive_for_dma(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
- if ((m5229_revision<=0x20) && (drive->media!=ide_disk))
- goto ata_pio;
-
drive->init_speed = 0;
- if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto ata_pio;
- if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) {
- if (id->dma_ultra & hwif->ultra_mask) {
- /* Force if Capable UltraDMA */
- int dma = config_chipset_for_dma(drive);
- if ((id->field_valid & 2) && !dma)
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & hwif->mwdma_mask) ||
- (id->dma_1word & hwif->swdma_mask)) {
- /* Force if Capable regular DMA modes */
- if (!config_chipset_for_dma(drive))
- goto ata_pio;
- }
- } else if (__ide_dma_good_drive(drive) &&
- (id->eide_dma_time < 150)) {
- /* Consult the list of known "good" drives */
- if (!config_chipset_for_dma(drive))
- goto ata_pio;
- } else {
- goto ata_pio;
- }
- } else {
-ata_pio:
- hwif->tuneproc(drive, 255);
- return -1;
- }
+ if (ide_tune_dma(drive))
+ return 0;
- return 0;
+ ali15x3_tune_drive(drive, 255);
+
+ return -1;
}
/**
@@ -739,7 +683,8 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
return;
}
- hwif->atapi_dma = 1;
+ if (m5229_revision > 0x20)
+ hwif->atapi_dma = 1;
if (m5229_revision <= 0x20)
hwif->ultra_mask = 0x00; /* no udma */
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 61ea96b..7c57dc6 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -352,22 +352,9 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
return ide_config_drive_speed(drive, speed);
}
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- if (cmd64x_tune_chipset(drive, speed))
- return 0;
-
- return ide_dma_enable(drive);
-}
-
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
{
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index b2d7c13..1eec1f3 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -1,10 +1,10 @@
/*
- * linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002
+ * linux/drivers/ide/pci/cs5530.c Version 0.73 Mar 10 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
- * Ditto of GNU General Public License.
- *
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@@ -62,6 +62,14 @@ static unsigned int cs5530_pio_timings[2][5] = {
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
+static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
+{
+ unsigned long basereg = CS5530_BASEREG(drive->hwif);
+ unsigned int format = (inl(basereg + 4) >> 31) & 1;
+
+ outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
+}
+
/**
* cs5530_tuneproc - select/set PIO modes
*
@@ -74,98 +82,78 @@ static unsigned int cs5530_pio_timings[2][5] = {
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned int format;
- unsigned long basereg = CS5530_BASEREG(hwif);
- static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
-
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
- if (!cs5530_set_xfer_mode(drive, modes[pio])) {
- format = (inl(basereg + 4) >> 31) & 1;
- outl(cs5530_pio_timings[format][pio],
- basereg+(drive->select.b.unit<<3));
+
+ if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
+ cs5530_tunepio(drive, pio);
+}
+
+/**
+ * cs5530_udma_filter - UDMA filter
+ * @drive: drive
+ *
+ * cs5530_udma_filter() does UDMA mask filtering for the given drive
+ * taking into the consideration capabilities of the mate device.
+ *
+ * The CS5530 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
+ *
+ * Note: This relies on the fact we never fail from UDMA to MWDMA2
+ * but instead drop to PIO.
+ */
+
+static u8 cs5530_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
+ struct hd_driveid *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate->present == 0)
+ goto out;
+
+ if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ goto out;
+ if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ mask = 0;
}
+out:
+ return mask;
}
/**
- * cs5530_config_dma - select/set DMA and UDMA modes
+ * cs5530_config_dma - set DMA/UDMA mode
* @drive: drive to tune
*
- * cs5530_config_dma() handles selection/setting of DMA/UDMA modes
- * for both the chipset and drive. The CS5530 has limitations about
- * mixing DMA/UDMA on the same cable.
+ * cs5530_config_dma() handles setting of DMA/UDMA mode
+ * for both the chipset and drive.
*/
-
-static int cs5530_config_dma (ide_drive_t *drive)
+
+static int cs5530_config_dma(ide_drive_t *drive)
{
- int udma_ok = 1, mode = 0;
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- ide_drive_t *mate = &hwif->drives[unit^1];
- struct hd_driveid *id = drive->id;
- unsigned int reg, timings = 0;
- unsigned long basereg;
+ if (ide_tune_dma(drive))
+ return 0;
- /*
- * Default to DMA-off in case we run into trouble here.
- */
- hwif->dma_off_quietly(drive);
+ return 1;
+}
- /*
- * The CS5530 specifies that two drives sharing a cable cannot
- * mix UDMA/MDMA. It has to be one or the other, for the pair,
- * though different timings can still be chosen for each drive.
- * We could set the appropriate timing bits on the fly,
- * but that might be a bit confusing. So, for now we statically
- * handle this requirement by looking at our mate drive to see
- * what it is capable of, before choosing a mode for our own drive.
- *
- * Note: This relies on the fact we never fail from UDMA to MWDMA_2
- * but instead drop to PIO
- */
- if (mate->present) {
- struct hd_driveid *mateid = mate->id;
- if (mateid && (mateid->capability & 1) &&
- !__ide_dma_bad_drive(mate)) {
- if ((mateid->field_valid & 4) &&
- (mateid->dma_ultra & 7))
- udma_ok = 1;
- else if ((mateid->field_valid & 2) &&
- (mateid->dma_mword & 7))
- udma_ok = 0;
- else
- udma_ok = 1;
- }
- }
+static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
+{
+ unsigned long basereg;
+ unsigned int reg, timings = 0;
- /*
- * Now see what the current drive is capable of,
- * selecting UDMA only if the mate said it was ok.
- */
- if (id && (id->capability & 1) && drive->autodma &&
- !__ide_dma_bad_drive(drive)) {
- if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
- if (id->dma_ultra & 4)
- mode = XFER_UDMA_2;
- else if (id->dma_ultra & 2)
- mode = XFER_UDMA_1;
- else if (id->dma_ultra & 1)
- mode = XFER_UDMA_0;
- }
- if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
- if (id->dma_mword & 4)
- mode = XFER_MW_DMA_2;
- else if (id->dma_mword & 2)
- mode = XFER_MW_DMA_1;
- else if (id->dma_mword & 1)
- mode = XFER_MW_DMA_0;
- }
- }
+ mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
- if (!mode || cs5530_set_xfer_mode(drive, mode))
+ if (cs5530_set_xfer_mode(drive, mode))
return 1; /* failure */
/*
@@ -178,14 +166,21 @@ static int cs5530_config_dma (ide_drive_t *drive)
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ cs5530_tunepio(drive, mode - XFER_PIO_0);
+ return 0;
default:
BUG();
break;
}
- basereg = CS5530_BASEREG(hwif);
+ basereg = CS5530_BASEREG(drive->hwif);
reg = inl(basereg + 4); /* get drive0 config register */
timings |= reg & 0x80000000; /* preserve PIO format bit */
- if (unit == 0) { /* are we configuring drive0? */
+ if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
outl(timings, basereg + 4); /* write drive0 config register */
} else {
if (timings & 0x00100000)
@@ -311,6 +306,8 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->tuneproc = &cs5530_tuneproc;
+ hwif->speedproc = &cs5530_tune_chipset;
+
basereg = CS5530_BASEREG(hwif);
d0_timings = inl(basereg + 0);
if (CS5530_BAD_PIO(d0_timings)) {
@@ -332,6 +329,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->ultra_mask = 0x07;
hwif->mwdma_mask = 0x07;
+ hwif->udma_filter = cs5530_udma_filter;
hwif->ide_dma_check = &cs5530_config_dma;
if (!noautodma)
hwif->autodma = 1;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 442f658..5faaff8 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -464,25 +464,6 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
}
/**
- * config_chipset_for_dma - configure for DMA
- * @drive: drive to configure
- *
- * Called by the IDE layer when it wants the timings set up.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (speed == 0)
- return 0;
-
- it821x_tune_chipset(drive, speed);
-
- return ide_dma_enable(drive);
-}
-
-/**
* it821x_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
@@ -494,7 +475,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int it821x_config_drive_for_dma (ide_drive_t *drive)
{
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
it821x_tuneproc(drive, 255);
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 65b1e12..cc0bfdc 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -228,38 +228,11 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
return get_indexed_reg(hwif, 0x0b) & 0x04;
}
-static int config_chipset_for_dma(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- u8 speed;
-
- if (id->capability & 4) {
- /*
- * Set IORDY_EN & PREFETCH_EN (this seems to have
- * NO real effect since this register is reloaded
- * by hardware when the transfer mode is selected)
- */
- u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00;
-
- tmp = get_indexed_reg(hwif, 0x13 + adj);
- set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
- }
-
- speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- (void) hwif->speedproc(drive, speed);
- return ide_dma_enable(drive);
-}
-
static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
{
drive->init_speed = 0;
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 7146fe3..2384468 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -1,8 +1,9 @@
/*
- * linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002
+ * linux/drivers/ide/pci/pdc202xx_old.c Version 0.50 Mar 3, 2007
*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc.
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this
* compiled into the kernel if you have more than one card installed.
@@ -60,45 +61,7 @@ static const char *pdc_quirk_drives[] = {
NULL
};
-/* A Register */
-#define SYNC_ERRDY_EN 0xC0
-
-#define SYNC_IN 0x80 /* control bit, different for master vs. slave drives */
-#define ERRDY_EN 0x40 /* control bit, different for master vs. slave drives */
-#define IORDY_EN 0x20 /* PIO: IOREADY */
-#define PREFETCH_EN 0x10 /* PIO: PREFETCH */
-
-#define PA3 0x08 /* PIO"A" timing */
-#define PA2 0x04 /* PIO"A" timing */
-#define PA1 0x02 /* PIO"A" timing */
-#define PA0 0x01 /* PIO"A" timing */
-
-/* B Register */
-
-#define MB2 0x80 /* DMA"B" timing */
-#define MB1 0x40 /* DMA"B" timing */
-#define MB0 0x20 /* DMA"B" timing */
-
-#define PB4 0x10 /* PIO_FORCE 1:0 */
-
-#define PB3 0x08 /* PIO"B" timing */ /* PIO flow Control mode */
-#define PB2 0x04 /* PIO"B" timing */ /* PIO 4 */
-#define PB1 0x02 /* PIO"B" timing */ /* PIO 3 half */
-#define PB0 0x01 /* PIO"B" timing */ /* PIO 3 other half */
-
-/* C Register */
-#define IORDYp_NO_SPEED 0x4F
-#define SPEED_DIS 0x0F
-
-#define DMARQp 0x80
-#define IORDYp 0x40
-#define DMAR_EN 0x20
-#define DMAW_EN 0x10
-
-#define MC3 0x08 /* DMA"C" timing */
-#define MC2 0x04 /* DMA"C" timing */
-#define MC1 0x02 /* DMA"C" timing */
-#define MC0 0x01 /* DMA"C" timing */
+static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
@@ -107,52 +70,25 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 speed = ide_rate_filter(drive, xferspeed);
- u32 drive_conf;
- u8 AP, BP, CP, DP;
+ u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
- if (drive->media != ide_disk &&
- drive->media != ide_cdrom && speed < XFER_SW_DMA_0)
- return -1;
-
+#if PDC202XX_DEBUG_DRIVE_INFO
+ u32 drive_conf = 0;
pci_read_config_dword(dev, drive_pci, &drive_conf);
- pci_read_config_byte(dev, (drive_pci), &AP);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
- pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
- pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
+#endif
- if (speed < XFER_SW_DMA_0) {
- if ((AP & 0x0F) || (BP & 0x07)) {
- /* clear PIO modes of lower 8421 bits of A Register */
- pci_write_config_byte(dev, (drive_pci), AP &~0x0F);
- pci_read_config_byte(dev, (drive_pci), &AP);
-
- /* clear PIO modes of lower 421 bits of B Register */
- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-
- pci_read_config_byte(dev, (drive_pci), &AP);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
- }
- } else {
- if ((BP & 0xF0) && (CP & 0x0F)) {
- /* clear DMA modes of upper 842 bits of B Register */
- /* clear PIO forced mode upper 1 bit of B Register */
- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-
- /* clear DMA modes of lower 8421 bits of C Register */
- pci_write_config_byte(dev, (drive_pci)|0x02, CP &~0x0F);
- pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
- }
- }
+ /*
+ * TODO: do this once per channel
+ */
+ if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
+ pdc_old_disable_66MHz_clock(hwif);
- pci_read_config_byte(dev, (drive_pci), &AP);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
- pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
+ pci_read_config_byte(dev, drive_pci, &AP);
+ pci_read_config_byte(dev, drive_pci + 1, &BP);
+ pci_read_config_byte(dev, drive_pci + 2, &CP);
switch(speed) {
- case XFER_UDMA_6: speed = XFER_UDMA_5;
case XFER_UDMA_5:
case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
@@ -161,7 +97,7 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_UDMA_0:
case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
- case XFER_MW_DMA_0:
+ case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break;
case XFER_SW_DMA_2: TB = 0x60; TC = 0x05; break;
case XFER_SW_DMA_1: TB = 0x80; TC = 0x06; break;
case XFER_SW_DMA_0: TB = 0xC0; TC = 0x0B; break;
@@ -174,25 +110,39 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
}
if (speed < XFER_SW_DMA_0) {
- pci_write_config_byte(dev, (drive_pci), AP|TA);
- pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
+ /*
+ * preserve SYNC_INT / ERDDY_EN bits while clearing
+ * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
+ */
+ AP &= ~0x3f;
+ if (drive->id->capability & 4)
+ AP |= 0x20; /* set IORDY_EN bit */
+ if (drive->media == ide_disk)
+ AP |= 0x10; /* set Prefetch_EN bit */
+ /* clear PB[4:0] bits of register B */
+ BP &= ~0x1f;
+ pci_write_config_byte(dev, drive_pci, AP | TA);
+ pci_write_config_byte(dev, drive_pci + 1, BP | TB);
} else {
- pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
- pci_write_config_byte(dev, (drive_pci)|0x02, CP|TC);
+ /* clear MB[2:0] bits of register B */
+ BP &= ~0xe0;
+ /* clear MC[3:0] bits of register C */
+ CP &= ~0x0f;
+ pci_write_config_byte(dev, drive_pci + 1, BP | TB);
+ pci_write_config_byte(dev, drive_pci + 2, CP | TC);
}
#if PDC202XX_DEBUG_DRIVE_INFO
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
drive->name, ide_xfer_verbose(speed),
drive->dn, drive_conf);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
+ pci_read_config_dword(dev, drive_pci, &drive_conf);
printk("0x%08x\n", drive_conf);
-#endif /* PDC202XX_DEBUG_DRIVE_INFO */
+#endif
- return (ide_config_drive_speed(drive, speed));
+ return ide_config_drive_speed(drive, speed);
}
-
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
@@ -210,6 +160,8 @@ static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
* Set the control register to use the 66MHz system
* clock for UDMA 3/4/5 mode operation when necessary.
*
+ * FIXME: this register is shared by both channels, some locking is needed
+ *
* It may also be possible to leave the 66MHz clock on
* and readjust the timing parameters.
*/
@@ -229,65 +181,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
}
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u32 drive_conf = 0;
- u8 drive_pci = 0x60 + (drive->dn << 2);
- u8 test1 = 0, test2 = 0, speed = -1;
- u8 AP = 0;
-
- if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
- pdc_old_disable_66MHz_clock(drive->hwif);
-
- drive_pci = 0x60 + (drive->dn << 2);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- if ((drive_conf != 0x004ff304) && (drive_conf != 0x004ff3c4))
- goto chipset_is_set;
-
- pci_read_config_byte(dev, drive_pci, &test1);
- if (!(test1 & SYNC_ERRDY_EN)) {
- if (drive->select.b.unit & 0x01) {
- pci_read_config_byte(dev, drive_pci - 4, &test2);
- if ((test2 & SYNC_ERRDY_EN) &&
- !(test1 & SYNC_ERRDY_EN)) {
- pci_write_config_byte(dev, drive_pci,
- test1|SYNC_ERRDY_EN);
- }
- } else {
- pci_write_config_byte(dev, drive_pci,
- test1|SYNC_ERRDY_EN);
- }
- }
-
-chipset_is_set:
-
- pci_read_config_byte(dev, (drive_pci), &AP);
- if (id->capability & 4) /* IORDY_EN */
- pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN);
- pci_read_config_byte(dev, (drive_pci), &AP);
- if (drive->media == ide_disk) /* PREFETCH_EN */
- pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN);
-
- speed = ide_max_dma_mode(drive);
-
- if (!(speed)) {
- /* restore original pci-config space */
- pci_write_config_dword(dev, drive_pci, drive_conf);
- return 0;
- }
-
- (void) hwif->speedproc(drive, speed);
- return ide_dma_enable(drive);
-}
-
static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
{
drive->init_speed = 0;
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index b5ae0c5..523363c 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,7 +1,9 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
+ * linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@@ -93,64 +95,50 @@ static const unsigned int sc1200_pio_timings[4][5] =
*/
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-static int sc1200_autoselect_dma_mode (ide_drive_t *drive)
+static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
- int udma_ok = 1, mode = 0;
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- ide_drive_t *mate = &hwif->drives[unit^1];
- struct hd_driveid *id = drive->id;
-
- /*
- * The SC1200 specifies that two drives sharing a cable cannot
- * mix UDMA/MDMA. It has to be one or the other, for the pair,
- * though different timings can still be chosen for each drive.
- * We could set the appropriate timing bits on the fly,
- * but that might be a bit confusing. So, for now we statically
- * handle this requirement by looking at our mate drive to see
- * what it is capable of, before choosing a mode for our own drive.
- */
- if (mate->present) {
- struct hd_driveid *mateid = mate->id;
- if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
- udma_ok = 1;
- else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
- udma_ok = 0;
- else
- udma_ok = 1;
- }
- }
- /*
- * Now see what the current drive is capable of,
- * selecting UDMA only if the mate said it was ok.
- */
- if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) {
- if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
- if (id->dma_ultra & 4)
- mode = XFER_UDMA_2;
- else if (id->dma_ultra & 2)
- mode = XFER_UDMA_1;
- else if (id->dma_ultra & 1)
- mode = XFER_UDMA_0;
- }
- if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
- if (id->dma_mword & 4)
- mode = XFER_MW_DMA_2;
- else if (id->dma_mword & 2)
- mode = XFER_MW_DMA_1;
- else if (id->dma_mword & 1)
- mode = XFER_MW_DMA_0;
- }
- }
- return mode;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *pdev = hwif->pci_dev;
+ unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
+
+ pci_read_config_dword(pdev, basereg + 4, &format);
+ format = (format >> 31) & 1;
+ if (format)
+ format += sc1200_get_pci_clock();
+ pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
+ sc1200_pio_timings[format][pio]);
}
/*
- * sc1200_config_dma2() handles selection/setting of DMA/UDMA modes
- * for both the chipset and drive.
+ * The SC1200 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
*/
-static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
+static u8 sc1200_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
+ struct hd_driveid *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate->present == 0)
+ goto out;
+
+ if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ goto out;
+ if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ mask = 0;
+ }
+out:
+ return mask;
+}
+
+static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
@@ -158,20 +146,26 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- /*
- * Default to DMA-off in case we run into trouble here.
- */
- hwif->dma_off_quietly(drive); /* turn off DMA while we fiddle */
- outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */
+ mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
- if (!mode || sc1200_set_xfer_mode(drive, mode)) {
+ if (sc1200_set_xfer_mode(drive, mode)) {
printk("SC1200: set xfer mode failure\n");
return 1; /* failure */
}
+ switch (mode) {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ sc1200_tunepio(drive, mode - XFER_PIO_0);
+ return 0;
+ }
+
pci_clock = sc1200_get_pci_clock();
/*
@@ -224,11 +218,9 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
case PCI_CLK_66: timings = 0x00015151; break;
}
break;
- }
-
- if (timings == 0) {
- printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock);
- return 1; /* failure */
+ default:
+ BUG();
+ break;
}
if (unit == 0) { /* are we configuring drive0? */
@@ -239,8 +231,6 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
}
- outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */
-
return 0; /* success */
}
@@ -250,7 +240,10 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
- return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive));
+ if (ide_tune_dma(drive))
+ return 0;
+
+ return 1;
}
@@ -290,10 +283,11 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned int format;
- static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
int mode = -1;
+ /*
+ * bad abuse of ->tuneproc interface
+ */
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
case 201: mode = XFER_UDMA_1; break;
@@ -304,20 +298,17 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
}
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- (void)sc1200_config_dma2(drive, mode);
+ hwif->dma_off_quietly(drive);
+ if (sc1200_tune_chipset(drive, mode) == 0)
+ hwif->dma_host_on(drive);
return;
}
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
- if (!sc1200_set_xfer_mode(drive, modes[pio])) {
- unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- pci_read_config_dword (hwif->pci_dev, basereg+4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]);
- }
+
+ if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
+ sc1200_tunepio(drive, pio);
}
#ifdef CONFIG_PM
@@ -438,12 +429,12 @@ static int sc1200_resume (struct pci_dev *dev)
for (d = 0; d < MAX_DRIVES; ++d) {
ide_drive_t *drive = &(hwif->drives[d]);
if (drive->present && !__ide_dma_bad_drive(drive)) {
- int was_using_dma = drive->using_dma;
+ int enable_dma = drive->using_dma;
hwif->dma_off_quietly(drive);
- sc1200_config_dma(drive);
- if (!was_using_dma && drive->using_dma) {
- hwif->dma_off_quietly(drive);
- }
+ if (sc1200_config_dma(drive))
+ enable_dma = 0;
+ if (enable_dma)
+ hwif->dma_host_on(drive);
}
}
}
@@ -461,11 +452,13 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->autodma = 0;
if (hwif->dma_base) {
+ hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
hwif->tuneproc = &sc1200_tuneproc;
+ hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x07;
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index cbf9363..55bc0a3 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -322,26 +322,6 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
}
/**
- * scc_config_chipset_for_dma - configure for DMA
- * @drive: drive to configure
- *
- * Called by scc_config_drive_for_dma().
- */
-
-static int scc_config_chipset_for_dma(ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- if (scc_tune_chipset(drive, speed))
- return 0;
-
- return ide_dma_enable(drive);
-}
-
-/**
* scc_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
@@ -354,7 +334,7 @@ static int scc_config_chipset_for_dma(ide_drive_t *drive)
static int scc_config_drive_for_dma(ide_drive_t *drive)
{
- if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 2fa6d92..6234f80 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,9 +1,10 @@
/*
- * linux/drivers/ide/pci/serverworks.c Version 0.8 25 Ebr 2003
+ * linux/drivers/ide/pci/serverworks.c Version 0.9 Mar 4 2007
*
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
* Portions copyright (c) 2001 Sun Microsystems
*
*
@@ -136,19 +137,14 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 speed;
- u8 pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
+ u8 speed = ide_rate_filter(drive, xferspeed);
+ u8 pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
u8 unit = (drive->select.b.unit & 0x01);
u8 csb5 = svwks_csb_check(dev);
u8 ultra_enable = 0, ultra_timing = 0;
u8 dma_timing = 0, pio_timing = 0;
u16 csb5_pio = 0;
- if (xferspeed == 255) /* PIO auto-tuning */
- speed = XFER_PIO_0 + pio;
- else
- speed = ide_rate_filter(drive, xferspeed);
-
/* If we are about to put a disk into UDMA mode we screwed up.
Our code assumes we never _ever_ do this on an OSB4 */
@@ -231,6 +227,9 @@ oem_setup_failed:
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
+ /*
+ * TODO: always setup PIO mode so this won't be needed
+ */
pio_timing |= pio_modes[pio];
csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
@@ -242,6 +241,9 @@ oem_setup_failed:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
+ /*
+ * TODO: always setup PIO mode so this won't be needed
+ */
pio_timing |= pio_modes[pio];
csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[2];
@@ -262,72 +264,21 @@ oem_setup_failed:
return (ide_config_drive_speed(drive, speed));
}
-static void config_chipset_for_pio (ide_drive_t *drive)
-{
- u16 eide_pio_timing[6] = {960, 480, 240, 180, 120, 90};
- u16 xfer_pio = drive->id->eide_pio_modes;
- u8 timing, speed, pio;
-
- pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
-
- if (xfer_pio > 4)
- xfer_pio = 0;
-
- if (drive->id->eide_pio_iordy > 0)
- for (xfer_pio = 5;
- xfer_pio>0 &&
- drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio];
- xfer_pio--);
- else
- xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
- (drive->id->eide_pio_modes & 2) ? 0x04 :
- (drive->id->eide_pio_modes & 1) ? 0x03 :
- (drive->id->tPIO & 2) ? 0x02 :
- (drive->id->tPIO & 1) ? 0x01 : xfer_pio;
-
- timing = (xfer_pio >= pio) ? xfer_pio : pio;
-
- switch(timing) {
- case 4: speed = XFER_PIO_4;break;
- case 3: speed = XFER_PIO_3;break;
- case 2: speed = XFER_PIO_2;break;
- case 1: speed = XFER_PIO_1;break;
- default:
- speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW;
- break;
- }
- (void) svwks_tune_chipset(drive, speed);
- drive->current_speed = speed;
-}
-
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
{
- if(pio == 255)
- (void) svwks_tune_chipset(drive, 255);
- else
- (void) svwks_tune_chipset(drive, (XFER_PIO_0 + pio));
-}
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!(speed))
- speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
-
- (void) svwks_tune_chipset(drive, speed);
- return ide_dma_enable(drive);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void)svwks_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
{
drive->init_speed = 0;
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
- config_chipset_for_pio(drive);
+ svwks_tune_drive(drive, 255);
return -1;
}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index d09e74c..1a4444e 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -375,28 +375,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
}
/**
- * config_chipset_for_dma - configure for DMA
- * @drive: drive to configure
- *
- * Called by the IDE layer when it wants the timings set up.
- * For the CMD680 we also need to set up the PIO timings and
- * enable DMA.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- if (siimage_tune_chipset(drive, speed))
- return 0;
-
- return ide_dma_enable(drive);
-}
-
-/**
* siimage_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
@@ -408,7 +386,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int siimage_config_drive_for_dma (ide_drive_t *drive)
{
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 2bde1b9..bb6cc4a 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,9 +1,11 @@
/*
- * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
+ * linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
*
@@ -448,36 +450,15 @@ static void config_drive_art_rwp (ide_drive_t *drive)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
}
-
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 timing, drive_pci, test1, test2;
-
- u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
- u16 xfer_pio = drive->id->eide_pio_modes;
+ u8 drive_pci, test1, test2;
config_drive_art_rwp(drive);
- pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- if (xfer_pio> 4)
- xfer_pio = 0;
-
- if (drive->id->eide_pio_iordy > 0) {
- for (xfer_pio = 5;
- (xfer_pio > 0) &&
- (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
- xfer_pio--);
- } else {
- xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
- (drive->id->eide_pio_modes & 2) ? 0x04 :
- (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio;
- }
-
- timing = (xfer_pio >= pio) ? xfer_pio : pio;
/* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
drive_pci = 0x40;
@@ -500,17 +481,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
test1 &= ~0x0F;
test2 &= ~0x07;
- switch(timing) {
+ switch(pio) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
+ case 0: /* PIO0: register setting == X000 */
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci+1, test2);
} else if (chipset_family < ATA_133) {
- switch(timing) { /* active recovery
+ switch(pio) { /* active recovery
v v */
case 4: test1 = 0x30|0x01; break;
case 3: test1 = 0x30|0x03; break;
@@ -525,24 +507,28 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
pci_read_config_dword(dev, drive_pci, &test3);
test3 &= 0xc0c00fff;
if (test3 & 0x08) {
- test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
- test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
- test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
+ test3 |= ini_time_value[ATA_133][pio] << 12;
+ test3 |= act_time_value[ATA_133][pio] << 16;
+ test3 |= rco_time_value[ATA_133][pio] << 24;
} else {
- test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
- test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
- test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
+ test3 |= ini_time_value[ATA_100][pio] << 12;
+ test3 |= act_time_value[ATA_100][pio] << 16;
+ test3 |= rco_time_value[ATA_100][pio] << 24;
}
pci_write_config_dword(dev, drive_pci, test3);
}
}
-static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
+static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255)
- pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
config_art_rwp_pio(drive, pio);
- return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
+ return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
+static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ (void)sis5513_tune_drive(drive, pio);
}
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
@@ -622,25 +608,26 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
break;
- case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
- case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
- case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
- case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
case XFER_PIO_0:
- default: return((int) config_chipset_for_pio(drive, 0));
+ return sis5513_tune_drive(drive, speed - XFER_PIO_0);
+ default:
+ BUG();
+ break;
}
- return ((int) ide_config_drive_speed(drive, speed));
-}
-
-static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
-{
- (void) config_chipset_for_pio(drive, pio);
+ return ide_config_drive_speed(drive, speed);
}
static int sis5513_config_xfer_rate(ide_drive_t *drive)
{
- config_art_rwp_pio(drive, 5);
+ /*
+ * TODO: always set PIO mode and remove this
+ */
+ sis5513_tuneproc(drive, 255);
drive->init_speed = 0;
@@ -648,7 +635,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- sis5513_tune_drive(drive, 5);
+ sis5513_tuneproc(drive, 255);
return -1;
}
@@ -836,7 +823,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &sis5513_tune_drive;
+ hwif->tuneproc = &sis5513_tuneproc;
hwif->speedproc = &sis5513_tune_chipset;
if (!(hwif->dma_base)) {
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index fe3b4b9..7c383d9 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -82,7 +82,14 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
pio = ide_get_best_pio_mode(drive, pio, 5, &p);
- drive->drive_data = drv_ctrl = get_pio_timings(&p);
+ drv_ctrl = get_pio_timings(&p);
+
+ /*
+ * Store the PIO timings so that we can restore them
+ * in case DMA will be turned off...
+ */
+ drive->drive_data &= 0xffff0000;
+ drive->drive_data |= drv_ctrl;
if (!drive->using_dma) {
/*
@@ -100,17 +107,55 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
}
/*
- * Configure the drive for DMA.
- * We'll program the chipset only when DMA is actually turned on.
+ * Configure the drive and chipset for a new transfer speed.
*/
-static int config_for_dma(ide_drive_t *drive)
+static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
{
- DBG(("config_for_dma(drive:%s)\n", drive->name));
+ static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+ u16 drv_ctrl;
- if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0)
- return 0;
+ DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
+ drive->name, ide_xfer_verbose(speed)));
- return ide_dma_enable(drive);
+ speed = ide_rate_filter(drive, speed);
+
+ switch (speed) {
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+
+ /*
+ * Store the DMA timings so that we can actually program
+ * them when DMA will be turned on...
+ */
+ drive->drive_data &= 0x0000ffff;
+ drive->drive_data |= (unsigned long)drv_ctrl << 16;
+
+ /*
+ * If we are already using DMA, we just reprogram
+ * the drive control register.
+ */
+ if (drive->using_dma) {
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ int reg = 0x44 + drive->dn * 4;
+
+ pci_write_config_word(dev, reg, drv_ctrl);
+ }
+ break;
+ case XFER_PIO_5:
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
+ break;
+ default:
+ return -1;
+ }
+
+ return ide_config_drive_speed(drive, speed);
}
/*
@@ -120,7 +165,7 @@ static int sl82c105_ide_dma_check(ide_drive_t *drive)
{
DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name));
- if (ide_use_dma(drive) && config_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
return -1;
@@ -219,7 +264,7 @@ static int sl82c105_ide_dma_on(ide_drive_t *drive)
rc = __ide_dma_on(drive);
if (rc == 0) {
- pci_write_config_word(dev, reg, 0x0200);
+ pci_write_config_word(dev, reg, drive->drive_data >> 16);
printk(KERN_INFO "%s: DMA enabled\n", drive->name);
}
@@ -304,7 +349,7 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
/*
* The bridge should be part of the same device, but function 0.
*/
- bridge = pci_find_slot(dev->bus->number,
+ bridge = pci_get_bus_and_slot(dev->bus->number,
PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
if (!bridge)
return -1;
@@ -314,13 +359,15 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
*/
if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
- bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA)
+ bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
+ pci_dev_put(bridge);
return -1;
-
+ }
/*
* We need to find function 0's revision, not function 1
*/
pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
+ pci_dev_put(bridge);
return rev;
}
@@ -357,6 +404,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->tuneproc = &sl82c105_tune_drive;
+ hwif->speedproc = &sl82c105_tune_chipset;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
@@ -388,7 +436,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
}
hwif->atapi_dma = 1;
- hwif->mwdma_mask = 0x04;
+ hwif->mwdma_mask = 0x07;
hwif->ide_dma_check = &sl82c105_ide_dma_check;
hwif->ide_dma_on = &sl82c105_ide_dma_on;
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 82f563e..b002345 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -255,6 +255,7 @@ config JOYSTICK_JOYDUMP
config JOYSTICK_XPAD
tristate "X-Box gamepad support"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the X-Box pad with your computer.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6013ace..842a7b4 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -84,6 +84,7 @@ config INPUT_ATLAS_BTNS
config INPUT_ATI_REMOTE
tristate "ATI / X10 USB RF remote control"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
@@ -99,6 +100,7 @@ config INPUT_ATI_REMOTE
config INPUT_ATI_REMOTE2
tristate "ATI / Philips USB RF remote control"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use an ATI or Philips USB RF remote control.
@@ -114,6 +116,7 @@ config INPUT_ATI_REMOTE2
config INPUT_KEYSPAN_REMOTE
tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use a Keyspan DMR USB remote control.
@@ -128,6 +131,7 @@ config INPUT_KEYSPAN_REMOTE
config INPUT_POWERMATE
tristate "Griffin PowerMate and Contour Jog support"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
@@ -144,6 +148,7 @@ config INPUT_POWERMATE
config INPUT_YEALINK
tristate "Yealink usb-p1k voip phone"
depends EXPERIMENTAL
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to enable keyboard and LCD functions of the
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 2ccc114..eb0167e 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -111,6 +111,7 @@ config MOUSE_SERIAL
config MOUSE_APPLETOUCH
tristate "Apple USB Touchpad support"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use an Apple USB Touchpad.
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index 12dfb0e..d371c0b 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -13,6 +13,7 @@ if INPUT_TABLET
config TABLET_USB_ACECAD
tristate "Acecad Flair tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the USB version of the Acecad Flair
@@ -25,6 +26,7 @@ config TABLET_USB_ACECAD
config TABLET_USB_AIPTEK
tristate "Aiptek 6000U/8000U tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the USB version of the Aiptek 6000U
@@ -49,6 +51,7 @@ config TABLET_USB_GTCO
config TABLET_USB_KBTAB
tristate "KB Gear JamStudio tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the USB version of the KB Gear
@@ -61,6 +64,7 @@ config TABLET_USB_KBTAB
config TABLET_USB_WACOM
tristate "Wacom Intuos/Graphire tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the USB version of the Wacom Intuos
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 5e640ae..4f09180 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -166,6 +166,7 @@ config TOUCHSCREEN_UCB1400
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
+ depends on USB_ARCH_HAS_HCD
select USB
help
USB Touchscreen driver for:
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 3823b62..2c450bd 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L1 && I2C && PCI
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index e854f3f..0cc98a0 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
- depends on VIDEO_V4L1 && VIDEO_V4L2 && USB && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L1 && VIDEO_V4L2 && USB && I2C && EXPERIMENTAL && PCI
select FW_LOADER
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index 9ffdb9d..dfbd580 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/bitmap.h>
+#include <linux/dma-mapping.h>
#include "mlx4.h"
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index af016d0..0f11adb 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -33,6 +33,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/mlx4/cmd.h>
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/mlx4/icm.c
index e96feaed..b7a4aa8 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/mlx4/icm.c
@@ -33,6 +33,7 @@
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/mm.h>
#include <linux/mlx4/cmd.h>
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/mlx4/reset.c
index 51eef84..e4dfd4b 100644
--- a/drivers/net/mlx4/reset.c
+++ b/drivers/net/mlx4/reset.c
@@ -35,6 +35,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include "mlx4.h"
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index bc7f3dee..8d38425 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -85,6 +85,7 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
{
struct pci_dev *pdev = mac->pdev;
struct device_node *dn = pci_device_to_OF_node(pdev);
+ int len;
const u8 *maddr;
u8 addr[6];
@@ -94,9 +95,17 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -ENOENT;
}
- maddr = of_get_property(dn, "local-mac-address", NULL);
+ maddr = of_get_property(dn, "local-mac-address", &len);
+
+ if (maddr && len == 6) {
+ memcpy(mac->mac_addr, maddr, 6);
+ return 0;
+ }
+
+ /* Some old versions of firmware mistakenly uses mac-address
+ * (and as a string) instead of a byte array in local-mac-address.
+ */
- /* Fall back to mac-address for older firmware */
if (maddr == NULL)
maddr = of_get_property(dn, "mac-address", NULL);
@@ -106,6 +115,7 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -ENOENT;
}
+
if (sscanf(maddr, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &addr[0],
&addr[1], &addr[2], &addr[3], &addr[4], &addr[5]) != 6) {
dev_warn(&pdev->dev,
@@ -113,7 +123,8 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -EINVAL;
}
- memcpy(mac->mac_addr, addr, sizeof(addr));
+ memcpy(mac->mac_addr, addr, 6);
+
return 0;
}
@@ -384,17 +395,14 @@ static void pasemi_mac_replenish_rx_ring(struct net_device *dev)
static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
{
- unsigned int reg, stat;
+ unsigned int reg, pcnt;
/* Re-enable packet count interrupts: finally
* ack the packet count interrupt we got in rx_intr.
*/
- pci_read_config_dword(mac->iob_pdev,
- PAS_IOB_DMA_RXCH_STAT(mac->dma_rxch),
- &stat);
+ pcnt = *mac->rx_status & PAS_STATUS_PCNT_M;
- reg = PAS_IOB_DMA_RXCH_RESET_PCNT(stat & PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
- | PAS_IOB_DMA_RXCH_RESET_PINTC;
+ reg = PAS_IOB_DMA_RXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_RXCH_RESET_PINTC;
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch),
@@ -403,14 +411,12 @@ static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
static void pasemi_mac_restart_tx_intr(struct pasemi_mac *mac)
{
- unsigned int reg, stat;
+ unsigned int reg, pcnt;
/* Re-enable packet count interrupts */
- pci_read_config_dword(mac->iob_pdev,
- PAS_IOB_DMA_TXCH_STAT(mac->dma_txch), &stat);
+ pcnt = *mac->tx_status & PAS_STATUS_PCNT_M;
- reg = PAS_IOB_DMA_TXCH_RESET_PCNT(stat & PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
- | PAS_IOB_DMA_TXCH_RESET_PINTC;
+ reg = PAS_IOB_DMA_TXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_TXCH_RESET_PINTC;
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_TXCH_RESET(mac->dma_txch), reg);
@@ -591,21 +597,24 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data)
{
struct net_device *dev = data;
struct pasemi_mac *mac = netdev_priv(dev);
- unsigned int reg;
+ unsigned int reg, pcnt;
if (!(*mac->tx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
pasemi_mac_clean_tx(mac);
- reg = PAS_IOB_DMA_TXCH_RESET_PINTC;
+ pcnt = *mac->tx_status & PAS_STATUS_PCNT_M;
+
+ reg = PAS_IOB_DMA_TXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_TXCH_RESET_PINTC;
if (*mac->tx_status & PAS_STATUS_SOFT)
reg |= PAS_IOB_DMA_TXCH_RESET_SINTC;
if (*mac->tx_status & PAS_STATUS_ERROR)
reg |= PAS_IOB_DMA_TXCH_RESET_DINTC;
- pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
+ pci_write_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
reg);
return IRQ_HANDLED;
@@ -974,6 +983,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
if (txring->next_to_clean - txring->next_to_use == TX_RING_SIZE) {
spin_unlock_irqrestore(&txring->lock, flags);
pasemi_mac_clean_tx(mac);
+ pasemi_mac_restart_tx_intr(mac);
spin_lock_irqsave(&txring->lock, flags);
if (txring->next_to_clean - txring->next_to_use ==
@@ -1210,6 +1220,7 @@ static void __devexit pasemi_mac_remove(struct pci_dev *pdev)
static struct pci_device_id pasemi_mac_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa005) },
{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa006) },
+ { },
};
MODULE_DEVICE_TABLE(pci, pasemi_mac_pci_tbl);
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 8bc0cea..c29ee15 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -341,7 +341,7 @@ enum {
PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4)
#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000
-#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 0
+#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16
#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
PAS_IOB_DMA_RXCH_RESET_PCNT_M)
#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020
@@ -352,7 +352,7 @@ enum {
#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001
#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4)
#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000
-#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 0
+#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16
#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
PAS_IOB_DMA_TXCH_RESET_PCNT_M)
#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 81f2484..db43e42 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -77,7 +77,6 @@ static const char version[] =
#include <linux/skbuff.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include "smc911x.h"
@@ -2084,12 +2083,11 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
lp->ctl_rspeed = 100;
/* Grab the IRQ */
- retval = request_irq(dev->irq, &smc911x_interrupt, IRQF_SHARED, dev->name, dev);
+ retval = request_irq(dev->irq, &smc911x_interrupt,
+ IRQF_SHARED | IRQF_TRIGGER_FALLING, dev->name, dev);
if (retval)
goto err_out;
- set_irq_type(dev->irq, IRQT_FALLING);
-
#ifdef SMC_USE_DMA
lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 0f66765..c2ccbd0 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@@ -3737,21 +3737,21 @@ static int ucc_geth_close(struct net_device *dev)
const struct ethtool_ops ucc_geth_ethtool_ops = { };
-static phy_interface_t to_phy_interface(const char *interface_type)
+static phy_interface_t to_phy_interface(const char *phy_connection_type)
{
- if (strcasecmp(interface_type, "mii") == 0)
+ if (strcasecmp(phy_connection_type, "mii") == 0)
return PHY_INTERFACE_MODE_MII;
- if (strcasecmp(interface_type, "gmii") == 0)
+ if (strcasecmp(phy_connection_type, "gmii") == 0)
return PHY_INTERFACE_MODE_GMII;
- if (strcasecmp(interface_type, "tbi") == 0)
+ if (strcasecmp(phy_connection_type, "tbi") == 0)
return PHY_INTERFACE_MODE_TBI;
- if (strcasecmp(interface_type, "rmii") == 0)
+ if (strcasecmp(phy_connection_type, "rmii") == 0)
return PHY_INTERFACE_MODE_RMII;
- if (strcasecmp(interface_type, "rgmii") == 0)
+ if (strcasecmp(phy_connection_type, "rgmii") == 0)
return PHY_INTERFACE_MODE_RGMII;
- if (strcasecmp(interface_type, "rgmii-id") == 0)
+ if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
return PHY_INTERFACE_MODE_RGMII_ID;
- if (strcasecmp(interface_type, "rtbi") == 0)
+ if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
return PHY_INTERFACE_MODE_MII;
@@ -3819,29 +3819,21 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->phy_address = *prop;
/* get the phy interface type, or default to MII */
- prop = of_get_property(np, "interface-type", NULL);
+ prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
prop = of_get_property(phy, "interface", NULL);
- if (prop != NULL)
+ if (prop != NULL) {
phy_interface = enet_to_phy_interface[*prop];
- else
+ max_speed = enet_to_speed[*prop];
+ } else
phy_interface = PHY_INTERFACE_MODE_MII;
} else {
phy_interface = to_phy_interface((const char *)prop);
}
- /* get speed, or derive from interface */
- prop = of_get_property(np, "max-speed", NULL);
- if (!prop) {
- /* handle interface property present in old trees */
- prop = of_get_property(phy, "interface", NULL);
- if (prop != NULL)
- max_speed = enet_to_speed[*prop];
- } else {
- max_speed = *prop;
- }
- if (!max_speed) {
+ /* get speed, or derive from PHY interface */
+ if (max_speed == 0)
switch (phy_interface) {
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_RGMII:
@@ -3854,9 +3846,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
max_speed = SPEED_100;
break;
}
- }
if (max_speed == SPEED_1000) {
+ /* configure muram FIFOs for gigabit operation */
ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
ug_info->uf_info.urfset = UCC_GETH_URFSET_GIGA_INIT;
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 27a1ef3..f96966d 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -1,12 +1,13 @@
/*
* drivers/net/ucc_geth_mii.c
*
- * Gianfar Ethernet Driver -- MIIM bus implementation
- * Provides Bus interface for MIIM regs
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
*
- * Author: Li Yang
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli@freescale.com>
+ * Kim Phillips <kim.phillips@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
index 98430fe..d834370 100644
--- a/drivers/net/ucc_geth_mii.h
+++ b/drivers/net/ucc_geth_mii.h
@@ -1,13 +1,13 @@
/*
* drivers/net/ucc_geth_mii.h
*
- * Gianfar Ethernet Driver -- MII Management Bus Implementation
- * Driver for the MDIO bus controller in the Gianfar register space
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
*
- * Author: Andy Fleming
- * Maintainer: Kumar Gala
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli@freescale.com>
+ * Kim Phillips <kim.phillips@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 6c5be3f..df07606 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -129,8 +129,9 @@ struct kobj_type ktype_dlpar_io = {
};
struct kset dlpar_io_kset = {
- .subsys = &pci_hotplug_slots_subsys,
- .kobj = {.name = DLPAR_KOBJ_NAME, .ktype=&ktype_dlpar_io,},
+ .kobj = {.name = DLPAR_KOBJ_NAME,
+ .ktype = &ktype_dlpar_io,
+ .parent = &pci_hotplug_slots_subsys.kobj},
.ktype = &ktype_dlpar_io,
};
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index b291b2f..8ee73d3 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -10,6 +10,7 @@
* Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
*/
+#include <linux/compiler.h>
#include <asm/assembler.h>
#ifdef __KERNEL__
@@ -154,7 +155,7 @@ extern void __xchg_called_with_bad_pointer(void);
#define DCACHE_CLEAR(reg0, reg1, addr)
#endif /* CONFIG_CHIP_M32700_TS1 */
-static inline unsigned long
+static __always_inline unsigned long
__xchg(unsigned long x, volatile void * ptr, int size)
{
unsigned long flags;
diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h
index 5efe906..c7c0f05 100644
--- a/include/asm-sh64/dma-mapping.h
+++ b/include/asm-sh64/dma-mapping.h
@@ -35,6 +35,10 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
consistent_free(NULL, size, vaddr, dma_handle);
}
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
{
@@ -49,7 +53,7 @@ static inline dma_addr_t dma_map_single(struct device *dev,
if (dev->bus == &pci_bus_type)
return virt_to_bus(ptr);
#endif
- dma_cache_sync(ptr, size, dir);
+ dma_cache_sync(dev, ptr, size, dir);
return virt_to_bus(ptr);
}
@@ -63,7 +67,7 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
for (i = 0; i < nents; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir);
#endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
@@ -94,7 +98,7 @@ static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(bus_to_virt(dma_handle), size, dir);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir);
}
static inline void dma_sync_single_range(struct device *dev,
@@ -106,7 +110,7 @@ static inline void dma_sync_single_range(struct device *dev,
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir);
+ dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir);
}
static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
@@ -116,7 +120,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
for (i = 0; i < nelems; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir);
#endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
diff --git a/include/asm-sh64/irq_regs.h b/include/asm-sh64/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/include/asm-sh64/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/include/asm-sh64/pgalloc.h b/include/asm-sh64/pgalloc.h
index cb803e5..6eccab7 100644
--- a/include/asm-sh64/pgalloc.h
+++ b/include/asm-sh64/pgalloc.h
@@ -14,13 +14,9 @@
*
*/
-#include <linux/threads.h>
#include <linux/mm.h>
-
-#define pgd_quicklist (current_cpu_data.pgd_quick)
-#define pmd_quicklist (current_cpu_data.pmd_quick)
-#define pte_quicklist (current_cpu_data.pte_quick)
-#define pgtable_cache_size (current_cpu_data.pgtable_cache_sz)
+#include <linux/quicklist.h>
+#include <asm/page.h>
static inline void pgd_init(unsigned long page)
{
@@ -45,84 +41,37 @@ static inline pgd_t *get_pgd_slow(void)
return ret;
}
-static inline pgd_t *get_pgd_fast(void)
-{
- unsigned long *ret;
-
- if ((ret = pgd_quicklist) != NULL) {
- pgd_quicklist = (unsigned long *)(*ret);
- ret[0] = 0;
- pgtable_cache_size--;
- } else
- ret = (unsigned long *)get_pgd_slow();
-
- if (ret) {
- memset(ret, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
- }
- return (pgd_t *)ret;
-}
-
-static inline void free_pgd_fast(pgd_t *pgd)
-{
- *(unsigned long *)pgd = (unsigned long) pgd_quicklist;
- pgd_quicklist = (unsigned long *) pgd;
- pgtable_cache_size++;
-}
-
-static inline void free_pgd_slow(pgd_t *pgd)
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- kfree((void *)pgd);
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
-extern pte_t *get_pte_slow(pmd_t *pmd, unsigned long address_preadjusted);
-extern pte_t *get_pte_kernel_slow(pmd_t *pmd, unsigned long address_preadjusted);
-
-static inline pte_t *get_pte_fast(void)
+static inline void pgd_free(pgd_t *pgd)
{
- unsigned long *ret;
-
- if((ret = (unsigned long *)pte_quicklist) != NULL) {
- pte_quicklist = (unsigned long *)(*ret);
- ret[0] = ret[1];
- pgtable_cache_size--;
- }
- return (pte_t *)ret;
+ quicklist_free(0, NULL, pgd);
}
-static inline void free_pte_fast(pte_t *pte)
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
{
- *(unsigned long *)pte = (unsigned long) pte_quicklist;
- pte_quicklist = (unsigned long *) pte;
- pgtable_cache_size++;
+ void *pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+ return pg ? virt_to_page(pg) : NULL;
}
static inline void pte_free_kernel(pte_t *pte)
{
- free_page((unsigned long)pte);
+ quicklist_free(0, NULL, pte);
}
static inline void pte_free(struct page *pte)
{
- __free_page(pte);
+ quicklist_free_page(0, NULL, pte);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- pte_t *pte;
-
- pte = (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT|__GFP_ZERO);
-
- return pte;
-}
-
-static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- struct page *pte;
-
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-
- return pte;
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
@@ -142,31 +91,23 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long add
#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL)
-static __inline__ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
- pmd_t *pmd;
- pmd = (pmd_t *) __get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
- return pmd;
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
-static __inline__ void pmd_free(pmd_t *pmd)
+static inline void pmd_free(pmd_t *pmd)
{
- free_page((unsigned long) pmd);
+ quicklist_free(0, NULL, pmd);
}
-#define pgd_populate(mm, pgd, pmd) pgd_set(pgd, pmd)
+#define pgd_populate(mm, pgd, pmd) pgd_set(pgd, pmd)
#define __pmd_free_tlb(tlb,pmd) pmd_free(pmd)
#else
#error "No defined page table size"
#endif
-#define check_pgt_cache() do { } while (0)
-#define pgd_free(pgd) free_pgd_slow(pgd)
-#define pgd_alloc(mm) get_pgd_fast()
-
-extern int do_check_pgt_cache(int, int);
-
#define pmd_populate_kernel(mm, pmd, pte) \
set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) (pte)))
@@ -176,4 +117,9 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) page_address (pte)));
}
+static inline void check_pgt_cache(void)
+{
+ quicklist_trim(0, NULL, 25, 16);
+}
+
#endif /* __ASM_SH64_PGALLOC_H */
diff --git a/include/asm-sh64/sci.h b/include/asm-sh64/sci.h
new file mode 100644
index 0000000..793c568
--- /dev/null
+++ b/include/asm-sh64/sci.h
@@ -0,0 +1 @@
+#include <asm-sh/sci.h>
diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h
index 1f825cb..f6d5117 100644
--- a/include/asm-sh64/thread_info.h
+++ b/include/asm-sh64/thread_info.h
@@ -78,7 +78,13 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_MEMDIE 4
+#define TIF_RESTORE_SIGMASK 5 /* Restore signal mask in do_signal */
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_MEMDIE (1 << TIF_MEMDIE)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#endif /* __KERNEL__ */
diff --git a/include/asm-sh64/unistd.h b/include/asm-sh64/unistd.h
index 1f38a7a..ea3adc6 100644
--- a/include/asm-sh64/unistd.h
+++ b/include/asm-sh64/unistd.h
@@ -9,14 +9,14 @@
* include/asm-sh64/unistd.h
*
* Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2007 Paul Mundt
* Copyright (C) 2004 Sean McGoogan
*
* This file contains the system call numbers.
*
*/
-#define __NR_setup 0 /* used only by init, to get system going */
+#define __NR_restart_syscall 0
#define __NR_exit 1
#define __NR_fork 2
#define __NR_read 3
@@ -196,8 +196,8 @@
#define __NR_rt_sigtimedwait 177
#define __NR_rt_sigqueueinfo 178
#define __NR_rt_sigsuspend 179
-#define __NR_pread 180
-#define __NR_pwrite 181
+#define __NR_pread64 180
+#define __NR_pwrite64 181
#define __NR_chown 182
#define __NR_getcwd 183
#define __NR_capget 184
@@ -343,10 +343,41 @@
#define __NR_inotify_init 318
#define __NR_inotify_add_watch 319
#define __NR_inotify_rm_watch 320
+/* 321 is unused */
+#define __NR_migrate_pages 322
+#define __NR_openat 323
+#define __NR_mkdirat 324
+#define __NR_mknodat 325
+#define __NR_fchownat 326
+#define __NR_futimesat 327
+#define __NR_fstatat64 328
+#define __NR_unlinkat 329
+#define __NR_renameat 330
+#define __NR_linkat 331
+#define __NR_symlinkat 332
+#define __NR_readlinkat 333
+#define __NR_fchmodat 334
+#define __NR_faccessat 335
+#define __NR_pselect6 336
+#define __NR_ppoll 337
+#define __NR_unshare 338
+#define __NR_set_robust_list 339
+#define __NR_get_robust_list 340
+#define __NR_splice 341
+#define __NR_sync_file_range 342
+#define __NR_tee 343
+#define __NR_vmsplice 344
+#define __NR_move_pages 345
+#define __NR_getcpu 346
+#define __NR_epoll_pwait 347
+#define __NR_utimensat 348
+#define __NR_signalfd 349
+#define __NR_timerfd 350
+#define __NR_eventfd 351
-#ifdef __KERNEL__
+#ifdef __KERNEL__
-#define NR_syscalls 321
+#define NR_syscalls 352
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/include/linux/ide.h b/include/linux/ide.h
index df4e6a5..07aba87 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1281,7 +1281,6 @@ struct drive_list_entry {
int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
int __ide_dma_bad_drive(ide_drive_t *);
int __ide_dma_good_drive(ide_drive_t *);
-int ide_use_dma(ide_drive_t *);
u8 ide_max_dma_mode(ide_drive_t *);
int ide_tune_dma(ide_drive_t *);
void ide_dma_off(ide_drive_t *);
@@ -1309,7 +1308,6 @@ extern int __ide_dma_timeout(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
#else
-static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline int ide_tune_dma(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off(ide_drive_t *drive) { ; }
@@ -1357,7 +1355,6 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
/* ide-lib.c */
u8 ide_rate_filter(ide_drive_t *, u8);
-extern int ide_dma_enable(ide_drive_t *drive);
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 6c61263..74cc0fc 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -311,6 +311,7 @@ int audit_match_class(int class, unsigned syscall)
return classes[class][AUDIT_WORD(syscall)] & AUDIT_BIT(syscall);
}
+#ifdef CONFIG_AUDITSYSCALL
static inline int audit_match_class_bits(int class, u32 *mask)
{
int i;
@@ -347,6 +348,7 @@ static int audit_match_signal(struct audit_entry *entry)
return 1;
}
}
+#endif
/* Common user-space to kernel rule translation. */
static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
diff --git a/mm/Kconfig b/mm/Kconfig
index a17da8b..8ac412b 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -166,5 +166,5 @@ config ZONE_DMA_FLAG
config NR_QUICK
int
depends on QUICKLIST
- default "2" if SUPERH
+ default "2" if (SUPERH && !SUPERH64)
default "1"
OpenPOWER on IntegriCloud