Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] SCSI core: better initialization for sdev->scsi_level
  [SCSI] scsi_proc.c: display sdev->scsi_level correctly
  [SCSI] megaraid_sas: update version and author info
  [SCSI] megaraid_sas: return sync cache call with success
  [SCSI] megaraid_sas: replace pci_alloc_consitent with dma_alloc_coherent in ioctl path
  [SCSI] megaraid_sas: add bios_param in scsi_host_template
  [SCSI] megaraid_sas: do not process cmds if hw_crit_error is set
  [SCSI] scsi_transport.h should include scsi_device.h
  [SCSI] aic79xx: remove extra newline from info message
  [SCSI] scsi_scan.c: handle bad inquiry responses
  [SCSI] aic94xx: tie driver to the major number of the sequencer firmware
  [SCSI] lpfc: add PCI error recovery support
  [SCSI] megaraid: pci_module_init to pci_register_driver
  [SCSI] tgt: fix the user/kernel ring buffer interface
  [SCSI] sgiwd93: interfacing to wd33c93
  [SCSI] wd33c93: Fast SCSI with WD33C93B

17 files changed, 481 insertions, 106 deletions

diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index c7fe478..2be03e9 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -418,7 +418,6 @@ ahd_linux_info(struct Scsi_Host *host)
 	strcat(bp, "        ");
 	ahd_controller_info(ahd, ahd_info);
 	strcat(bp, ahd_info);
-	strcat(bp, "\n");
 
 	return (bp);
 }
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index eae7a24..c750fbf 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -44,7 +44,6 @@
 #define PAUSE_TRIES 1000
 
 static const struct firmware *sequencer_fw;
-static const char *sequencer_version;
 static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
 	cseq_idle_loop, lseq_idle_loop;
 static u8 *cseq_code, *lseq_code;
@@ -1276,7 +1275,6 @@ static int asd_request_firmware(struct asd_ha_struct *asd_ha)
 	header.csum = le32_to_cpu(hdr_ptr->csum);
 	header.major = le32_to_cpu(hdr_ptr->major);
 	header.minor = le32_to_cpu(hdr_ptr->minor);
-	sequencer_version = hdr_ptr->version;
 	header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
 	header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
 	header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
@@ -1303,6 +1301,16 @@ static int asd_request_firmware(struct asd_ha_struct *asd_ha)
 		return -EINVAL;
 	}
 
+	asd_printk("Found sequencer Firmware version %d.%d (%s)\n",
+		   header.major, header.minor, hdr_ptr->version);
+
+	if (header.major != SAS_RAZOR_SEQUENCER_FW_MAJOR) {
+		asd_printk("Firmware Major Version Mismatch;"
+			   "driver requires version %d.X",
+			   SAS_RAZOR_SEQUENCER_FW_MAJOR);
+		return -EINVAL;
+	}
+
 	ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
 	ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
 	mode2_task = header.mode2_task;
@@ -1335,7 +1343,6 @@ int asd_init_seqs(struct asd_ha_struct *asd_ha)
 		return err;
 	}
 
-	asd_printk("using sequencer %s\n", sequencer_version);
 	err = asd_seq_download_seqs(asd_ha);
 	if (err) {
 		asd_printk("couldn't download sequencers for %s\n",
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h
index 9437ff0..2ea6a0d 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.h
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h
@@ -31,6 +31,7 @@
 #define LSEQ_NUM_VECS	11
 
 #define SAS_RAZOR_SEQUENCER_FW_FILE "aic94xx-seq.fw"
+#define SAS_RAZOR_SEQUENCER_FW_MAJOR	1
 
 /* Note:  All quantites in the sequencer file are little endian */
 struct sequencer_file_header {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index afca45c..9d014e5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -518,6 +518,10 @@ lpfc_handle_eratt(struct lpfc_hba * phba)
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring  *pring;
 	uint32_t event_data;
+	/* If the pci channel is offline, ignore possible errors,
+	 * since we cannot communicate with the pci card anyway. */
+	if (pci_channel_offline(phba->pcidev))
+		return;
 
 	if (phba->work_hs & HS_FFER6 ||
 	    phba->work_hs & HS_FFER5) {
@@ -1797,6 +1801,92 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
+/**
+ * lpfc_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
+				pci_channel_state_t state)
+{
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring  *pring;
+
+	if (state == pci_channel_io_perm_failure) {
+		lpfc_pci_remove_one(pdev);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	pci_disable_device(pdev);
+	/*
+	 * There may be I/Os dropped by the firmware.
+	 * Error iocb (I/O) on txcmplq and let the SCSI layer
+	 * retry it after re-establishing link.
+	 */
+	pring = &psli->ring[psli->fcp_ring];
+	lpfc_sli_abort_iocb_ring(phba, pring);
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata;
+	struct lpfc_sli *psli = &phba->sli;
+	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
+
+	dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
+	if (pci_enable_device_bars(pdev, bars)) {
+		printk(KERN_ERR "lpfc: Cannot re-enable "
+			"PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+
+	/* Re-establishing Link */
+	spin_lock_irq(phba->host->host_lock);
+	phba->fc_flag |= FC_ESTABLISH_LINK;
+	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	spin_unlock_irq(phba->host->host_lock);
+
+
+	/* Take device offline; this will perform cleanup */
+	lpfc_offline(phba);
+	lpfc_sli_brdrestart(phba);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void lpfc_io_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata;
+
+	if (lpfc_online(phba) == 0) {
+		mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
+	}
+}
+
 static struct pci_device_id lpfc_id_table[] = {
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
 		PCI_ANY_ID, PCI_ANY_ID, },
@@ -1857,11 +1947,18 @@ static struct pci_device_id lpfc_id_table[] = {
 
 MODULE_DEVICE_TABLE(pci, lpfc_id_table);
 
+static struct pci_error_handlers lpfc_err_handler = {
+	.error_detected = lpfc_io_error_detected,
+	.slot_reset = lpfc_io_slot_reset,
+	.resume = lpfc_io_resume,
+};
+
 static struct pci_driver lpfc_driver = {
 	.name		= LPFC_DRIVER_NAME,
 	.id_table	= lpfc_id_table,
 	.probe		= lpfc_pci_probe_one,
 	.remove		= __devexit_p(lpfc_pci_remove_one),
+	.err_handler = &lpfc_err_handler,
 };
 
 static int __init
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a4128e1..9fb6960 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2104,6 +2104,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 	volatile uint32_t word0, ldata;
 	void __iomem *to_slim;
 
+	/* If the PCI channel is in offline state, do not post mbox. */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return MBX_NOT_FINISHED;
+
 	psli = &phba->sli;
 
 	spin_lock_irqsave(phba->host->host_lock, drvr_flag);
@@ -2407,6 +2411,10 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct lpfc_iocbq *nextiocb;
 	IOCB_t *iocb;
 
+	/* If the PCI channel is in offline state, do not post iocbs. */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return IOCB_ERROR;
+
 	/*
 	 * We should never get an IOCB if we are in a < LINK_DOWN state
 	 */
@@ -3154,6 +3162,10 @@ lpfc_intr_handler(int irq, void *dev_id)
 	if (unlikely(!phba))
 		return IRQ_NONE;
 
+	/* If the pci channel is offline, ignore all the interrupts. */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return IRQ_NONE;
+
 	phba->sli.slistat.sli_intr++;
 
 	/*
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 808a1b8..0aa3304 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -5072,7 +5072,7 @@ static int __init megaraid_init(void)
 				"megaraid: failed to create megaraid root\n");
 	}
 #endif
-	error = pci_module_init(&megaraid_pci_driver);
+	error = pci_register_driver(&megaraid_pci_driver);
 	if (error) {
 #ifdef CONFIG_PROC_FS
 		remove_proc_entry("megaraid", &proc_root);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 15e24fc..7a81267 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,11 +10,13 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.03.05
+ * Version	: v00.00.03.10-rc1
  *
  * Authors:
- * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsi.com>
- * 	Sumant Patro		<Sumant.Patro@lsi.com>
+ *	(email-id : megaraidlinux@lsi.com)
+ * 	Sreenivas Bagalkote
+ * 	Sumant Patro
+ *	Bo Yang
  *
  * List of supported controllers
  *
@@ -35,6 +37,7 @@
 #include <asm/uaccess.h>
 #include <linux/fs.h>
 #include <linux/compat.h>
+#include <linux/blkdev.h>
 #include <linux/mutex.h>
 
 #include <scsi/scsi.h>
@@ -841,6 +844,11 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 
 	instance = (struct megasas_instance *)
 	    scmd->device->host->hostdata;
+
+	/* Don't process if we have already declared adapter dead */
+	if (instance->hw_crit_error)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	scmd->scsi_done = done;
 	scmd->result = 0;
 
@@ -850,6 +858,18 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 		goto out_done;
 	}
 
+	switch (scmd->cmnd[0]) {
+	case SYNCHRONIZE_CACHE:
+		/*
+		 * FW takes care of flush cache on its own
+		 * No need to send it down
+		 */
+		scmd->result = DID_OK << 16;
+		goto out_done;
+	default:
+		break;
+	}
+
 	cmd = megasas_get_cmd(instance);
 	if (!cmd)
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -1010,6 +1030,49 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
 }
 
 /**
+ * megasas_bios_param - Returns disk geometry for a disk
+ * @sdev: 		device handle
+ * @bdev:		block device
+ * @capacity:		drive capacity
+ * @geom:		geometry parameters
+ */
+static int
+megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+		 sector_t capacity, int geom[])
+{
+	int heads;
+	int sectors;
+	sector_t cylinders;
+	unsigned long tmp;
+	/* Default heads (64) & sectors (32) */
+	heads = 64;
+	sectors = 32;
+
+	tmp = heads * sectors;
+	cylinders = capacity;
+
+	sector_div(cylinders, tmp);
+
+	/*
+	 * Handle extended translation size for logical drives > 1Gb
+	 */
+
+	if (capacity >= 0x200000) {
+		heads = 255;
+		sectors = 63;
+		tmp = heads*sectors;
+		cylinders = capacity;
+		sector_div(cylinders, tmp);
+	}
+
+	geom[0] = heads;
+	geom[1] = sectors;
+	geom[2] = cylinders;
+
+	return 0;
+}
+
+/**
  * megasas_service_aen -	Processes an event notification
  * @instance:			Adapter soft state
  * @cmd:			AEN command completed by the ISR
@@ -1049,6 +1112,7 @@ static struct scsi_host_template megasas_template = {
 	.eh_device_reset_handler = megasas_reset_device,
 	.eh_bus_reset_handler = megasas_reset_bus_host,
 	.eh_host_reset_handler = megasas_reset_bus_host,
+	.bios_param = megasas_bios_param,
 	.use_clustering = ENABLE_CLUSTERING,
 };
 
@@ -1282,11 +1346,13 @@ megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
 	if(instance->instancet->clear_intr(instance->reg_set))
 		return IRQ_NONE;
 
+	if (instance->hw_crit_error)
+		goto out_done;
         /*
 	 * Schedule the tasklet for cmd completion
 	 */
 	tasklet_schedule(&instance->isr_tasklet);
-
+out_done:
 	return IRQ_HANDLED;
 }
 
@@ -1741,6 +1807,10 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
 	struct megasas_cmd *cmd;
 	struct megasas_instance *instance = (struct megasas_instance *)instance_addr;
 
+	/* If we have already declared adapter dead, donot complete cmds */
+	if (instance->hw_crit_error)
+		return;
+
 	producer = *instance->producer;
 	consumer = *instance->consumer;
 
@@ -2655,9 +2725,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 	 * For each user buffer, create a mirror buffer and copy in
 	 */
 	for (i = 0; i < ioc->sge_count; i++) {
-		kbuff_arr[i] = pci_alloc_consistent(instance->pdev,
+		kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
 						    ioc->sgl[i].iov_len,
-						    &buf_handle);
+						    &buf_handle, GFP_KERNEL);
 		if (!kbuff_arr[i]) {
 			printk(KERN_DEBUG "megasas: Failed to alloc "
 			       "kernel SGL buffer for IOCTL \n");
@@ -2684,8 +2754,8 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 	}
 
 	if (ioc->sense_len) {
-		sense = pci_alloc_consistent(instance->pdev, ioc->sense_len,
-					     &sense_handle);
+		sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
+					     &sense_handle, GFP_KERNEL);
 		if (!sense) {
 			error = -ENOMEM;
 			goto out;
@@ -2744,12 +2814,12 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 
       out:
 	if (sense) {
-		pci_free_consistent(instance->pdev, ioc->sense_len,
+		dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
 				    sense, sense_handle);
 	}
 
 	for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
-		pci_free_consistent(instance->pdev,
+		dma_free_coherent(&instance->pdev->dev,
 				    kern_sge32[i].length,
 				    kbuff_arr[i], kern_sge32[i].phys_addr);
 	}
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index cacb3ad..e862992 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"00.00.03.05"
-#define MEGASAS_RELDATE				"Oct 02, 2006"
-#define MEGASAS_EXT_VERSION			"Mon Oct 02 11:21:32 PDT 2006"
+#define MEGASAS_VERSION				"00.00.03.10-rc1"
+#define MEGASAS_RELDATE				"Feb 14, 2007"
+#define MEGASAS_EXT_VERSION			"Wed Feb 14 10:14:25 PST 2007"
 
 /*
  * Device IDs
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 69d6e9b..bb6f051 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -179,9 +179,8 @@ static int proc_print_scsidevice(struct device *dev, void *data)
 	seq_printf(s, "\n");
 
 	seq_printf(s, "  Type:   %s ", scsi_device_type(sdev->type));
-	seq_printf(s, "               ANSI"
-		     " SCSI revision: %02x", (sdev->scsi_level - 1) ?
-		     sdev->scsi_level - 1 : 1);
+	seq_printf(s, "               ANSI  SCSI revision: %02x",
+			sdev->scsi_level - (sdev->scsi_level > 1));
 	if (sdev->scsi_level == 2)
 		seq_printf(s, " CCS\n");
 	else
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index d6fe756..0949145 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -385,6 +385,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 	INIT_LIST_HEAD(&starget->siblings);
 	INIT_LIST_HEAD(&starget->devices);
 	starget->state = STARGET_RUNNING;
+	starget->scsi_level = SCSI_2;
  retry:
 	spin_lock_irqsave(shost->host_lock, flags);
 
@@ -654,6 +655,19 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	 * short INQUIRY), an abort here prevents any further use of the
 	 * device, including spin up.
 	 *
+	 * On the whole, the best approach seems to be to assume the first
+	 * 36 bytes are valid no matter what the device says.  That's
+	 * better than copying < 36 bytes to the inquiry-result buffer
+	 * and displaying garbage for the Vendor, Product, or Revision
+	 * strings.
+	 */
+	if (sdev->inquiry_len < 36) {
+		printk(KERN_INFO "scsi scan: INQUIRY result too short (%d),"
+				" using 36\n", sdev->inquiry_len);
+		sdev->inquiry_len = 36;
+	}
+
+	/*
 	 * Related to the above issue:
 	 *
 	 * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 259c90c..c275dca 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -922,7 +922,7 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)
 	snprintf(sdev->sdev_classdev.class_id, BUS_ID_SIZE,
 		 "%d:%d:%d:%d", sdev->host->host_no,
 		 sdev->channel, sdev->id, sdev->lun);
-	sdev->scsi_level = SCSI_2;
+	sdev->scsi_level = starget->scsi_level;
 	transport_setup_device(&sdev->sdev_gendev);
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_add_tail(&sdev->same_target_siblings, &starget->devices);
diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c
index f2344ab..0e08817 100644
--- a/drivers/scsi/scsi_tgt_if.c
+++ b/drivers/scsi/scsi_tgt_if.c
@@ -33,6 +33,14 @@
 
 #include "scsi_tgt_priv.h"
 
+#if TGT_RING_SIZE < PAGE_SIZE
+#  define TGT_RING_SIZE PAGE_SIZE
+#endif
+
+#define TGT_RING_PAGES (TGT_RING_SIZE >> PAGE_SHIFT)
+#define TGT_EVENT_PER_PAGE (PAGE_SIZE / sizeof(struct tgt_event))
+#define TGT_MAX_EVENTS (TGT_EVENT_PER_PAGE * TGT_RING_PAGES)
+
 struct tgt_ring {
 	u32 tr_idx;
 	unsigned long tr_pages[TGT_RING_PAGES];
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index e81f97a..a15752b 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -244,9 +244,10 @@ static struct Scsi_Host * __init sgiwd93_setup_scsi(
 	regs.SASR = wdregs + 3;
 	regs.SCMD = wdregs + 7;
 
-	wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_16_20);
+	wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_MHZ(20));
 
-	hdata->wh.no_sync = 0;
+	if (hdata->wh.no_sync == 0xff)
+		hdata->wh.no_sync = 0;
 
 	if (request_irq(irq, sgiwd93_intr, 0, "SGI WD93", (void *) host)) {
 		printk(KERN_WARNING "sgiwd93: Could not register irq %d "
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 8357516..fa4e08e 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -69,6 +69,11 @@
  * Added support for pre -A chips, which don't have advanced features
  * and will generate CSR_RESEL rather than CSR_RESEL_AM.
  *	Richard Hirst <richard@sleepie.demon.co.uk>  August 2000
+ *
+ * Added support for Burst Mode DMA and Fast SCSI. Enabled the use of
+ * default_sx_per for asynchronous data transfers. Added adjustment
+ * of transfer periods in sx_table to the actual input-clock.
+ *  peter fuerst <post@pfrst.de>  February 2007
  */
 
 #include <linux/module.h>
@@ -86,9 +91,11 @@
 
 #include "wd33c93.h"
 
+#define optimum_sx_per(hostdata) (hostdata)->sx_table[1].period_ns
+
 
-#define WD33C93_VERSION    "1.26"
-#define WD33C93_DATE       "22/Feb/2003"
+#define WD33C93_VERSION    "1.26++"
+#define WD33C93_DATE       "10/Feb/2007"
 
 MODULE_AUTHOR("John Shifflett");
 MODULE_DESCRIPTION("Generic WD33C93 SCSI driver");
@@ -122,6 +129,13 @@ MODULE_LICENSE("GPL");
  *                    defines in wd33c93.h
  * -  clock:x        -x = clock input in MHz for WD33c93 chip. Normal values
  *                    would be from 8 through 20. Default is 8.
+ * -  burst:x        -x = 1 to use Burst Mode (or Demand-Mode) DMA, x = 0 to use
+ *                    Single Byte DMA, which is the default. Argument is
+ *                    optional - if not present, same as "burst:1".
+ * -  fast:x         -x = 1 to enable Fast SCSI, which is only effective with
+ *                    input-clock divisor 4 (WD33C93_FS_16_20), x = 0 to disable
+ *                    it, which is the default.  Argument is optional - if not
+ *                    present, same as "fast:1".
  * -  next           -No argument. Used to separate blocks of keywords when
  *                    there's more than one host adapter in the system.
  *
@@ -148,7 +162,7 @@ MODULE_LICENSE("GPL");
  */
 
 /* Normally, no defaults are specified */
-static char *setup_args[] = { "", "", "", "", "", "", "", "", "" };
+static char *setup_args[] = { "", "", "", "", "", "", "", "", "", "" };
 
 static char *setup_strings;
 module_param(setup_strings, charp, 0);
@@ -298,20 +312,8 @@ read_1_byte(const wd33c93_regs regs)
 	return x;
 }
 
-static struct sx_period sx_table[] = {
-	{1, 0x20},
-	{252, 0x20},
-	{376, 0x30},
-	{500, 0x40},
-	{624, 0x50},
-	{752, 0x60},
-	{876, 0x70},
-	{1000, 0x00},
-	{0, 0}
-};
-
 static int
-round_period(unsigned int period)
+round_period(unsigned int period, const struct sx_period *sx_table)
 {
 	int x;
 
@@ -324,17 +326,49 @@ round_period(unsigned int period)
 	return 7;
 }
 
+/*
+ * Calculate Synchronous Transfer Register value from SDTR code.
+ */
 static uchar
-calc_sync_xfer(unsigned int period, unsigned int offset)
+calc_sync_xfer(unsigned int period, unsigned int offset, unsigned int fast,
+               const struct sx_period *sx_table)
 {
+	/* When doing Fast SCSI synchronous data transfers, the corresponding
+	 * value in 'sx_table' is two times the actually used transfer period.
+	 */
 	uchar result;
 
+	if (offset && fast) {
+		fast = STR_FSS;
+		period *= 2;
+	} else {
+		fast = 0;
+	}
 	period *= 4;		/* convert SDTR code to ns */
-	result = sx_table[round_period(period)].reg_value;
+	result = sx_table[round_period(period,sx_table)].reg_value;
 	result |= (offset < OPTIMUM_SX_OFF) ? offset : OPTIMUM_SX_OFF;
+	result |= fast;
 	return result;
 }
 
+/*
+ * Calculate SDTR code bytes [3],[4] from period and offset.
+ */
+static inline void
+calc_sync_msg(unsigned int period, unsigned int offset, unsigned int fast,
+                uchar  msg[2])
+{
+	/* 'period' is a "normal"-mode value, like the ones in 'sx_table'. The
+	 * actually used transfer period for Fast SCSI synchronous data
+	 * transfers is half that value.
+	 */
+	period /= 4;
+	if (offset && fast)
+		period /= 2;
+	msg[0] = period;
+	msg[1] = offset;
+}
+
 int
 wd33c93_queuecommand(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
@@ -632,7 +666,7 @@ wd33c93_execute(struct Scsi_Host *instance)
 				write_wd33c93_count(regs,
 						    cmd->SCp.this_residual);
 				write_wd33c93(regs, WD_CONTROL,
-					      CTRL_IDI | CTRL_EDI | CTRL_DMA);
+					      CTRL_IDI | CTRL_EDI | hostdata->dma_mode);
 				hostdata->dma = D_DMA_RUNNING;
 			}
 		} else
@@ -712,6 +746,8 @@ transfer_bytes(const wd33c93_regs regs, struct scsi_cmnd *cmd,
 		cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) +
 		    cmd->SCp.buffer->offset;
 	}
+	if (!cmd->SCp.this_residual) /* avoid bogus setups */
+		return;
 
 	write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,
 		      hostdata->sync_xfer[cmd->device->id]);
@@ -744,7 +780,7 @@ transfer_bytes(const wd33c93_regs regs, struct scsi_cmnd *cmd,
 #ifdef PROC_STATISTICS
 		hostdata->dma_cnt++;
 #endif
-		write_wd33c93(regs, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_DMA);
+		write_wd33c93(regs, WD_CONTROL, CTRL_IDI | CTRL_EDI | hostdata->dma_mode);
 		write_wd33c93_count(regs, cmd->SCp.this_residual);
 
 		if ((hostdata->level2 >= L2_DATA) ||
@@ -862,9 +898,6 @@ wd33c93_intr(struct Scsi_Host *instance)
 			hostdata->outgoing_msg[0] |= 0x40;
 
 		if (hostdata->sync_stat[cmd->device->id] == SS_FIRST) {
-#ifdef SYNC_DEBUG
-			printk(" sending SDTR ");
-#endif
 
 			hostdata->sync_stat[cmd->device->id] = SS_WAITING;
 
@@ -878,14 +911,20 @@ wd33c93_intr(struct Scsi_Host *instance)
 			hostdata->outgoing_msg[2] = 3;
 			hostdata->outgoing_msg[3] = EXTENDED_SDTR;
 			if (hostdata->no_sync & (1 << cmd->device->id)) {
-				hostdata->outgoing_msg[4] =
-				    hostdata->default_sx_per / 4;
-				hostdata->outgoing_msg[5] = 0;
+				calc_sync_msg(hostdata->default_sx_per, 0,
+						0, hostdata->outgoing_msg + 4);
 			} else {
-				hostdata->outgoing_msg[4] = OPTIMUM_SX_PER / 4;
-				hostdata->outgoing_msg[5] = OPTIMUM_SX_OFF;
+				calc_sync_msg(optimum_sx_per(hostdata),
+						OPTIMUM_SX_OFF,
+						hostdata->fast,
+						hostdata->outgoing_msg + 4);
 			}
 			hostdata->outgoing_len = 6;
+#ifdef SYNC_DEBUG
+			ucp = hostdata->outgoing_msg + 1;
+			printk(" sending SDTR %02x03%02x%02x%02x ",
+				ucp[0], ucp[2], ucp[3], ucp[4]);
+#endif
 		} else
 			hostdata->outgoing_len = 1;
 
@@ -1001,8 +1040,13 @@ wd33c93_intr(struct Scsi_Host *instance)
 #ifdef SYNC_DEBUG
 			    printk("-REJ-");
 #endif
-			if (hostdata->sync_stat[cmd->device->id] == SS_WAITING)
+			if (hostdata->sync_stat[cmd->device->id] == SS_WAITING) {
 				hostdata->sync_stat[cmd->device->id] = SS_SET;
+				/* we want default_sx_per, not DEFAULT_SX_PER */
+				hostdata->sync_xfer[cmd->device->id] =
+					calc_sync_xfer(hostdata->default_sx_per
+						/ 4, 0, 0, hostdata->sx_table);
+			}
 			write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
 			hostdata->state = S_CONNECTED;
 			break;
@@ -1022,7 +1066,10 @@ wd33c93_intr(struct Scsi_Host *instance)
 
 				switch (ucp[2]) {	/* what's the EXTENDED code? */
 				case EXTENDED_SDTR:
-					id = calc_sync_xfer(ucp[3], ucp[4]);
+					/* default to default async period */
+					id = calc_sync_xfer(hostdata->
+							default_sx_per / 4, 0,
+							0, hostdata->sx_table);
 					if (hostdata->sync_stat[cmd->device->id] !=
 					    SS_WAITING) {
 
@@ -1041,20 +1088,22 @@ wd33c93_intr(struct Scsi_Host *instance)
 						hostdata->outgoing_msg[1] = 3;
 						hostdata->outgoing_msg[2] =
 						    EXTENDED_SDTR;
-						hostdata->outgoing_msg[3] =
-						    hostdata->default_sx_per /
-						    4;
-						hostdata->outgoing_msg[4] = 0;
+						calc_sync_msg(hostdata->
+							default_sx_per, 0,
+							0, hostdata->outgoing_msg + 3);
 						hostdata->outgoing_len = 5;
-						hostdata->sync_xfer[cmd->device->id] =
-						    calc_sync_xfer(hostdata->
-								   default_sx_per
-								   / 4, 0);
 					} else {
-						hostdata->sync_xfer[cmd->device->id] = id;
+						if (ucp[4]) /* well, sync transfer */
+							id = calc_sync_xfer(ucp[3], ucp[4],
+									hostdata->fast,
+									hostdata->sx_table);
+						else if (ucp[3]) /* very unlikely... */
+							id = calc_sync_xfer(ucp[3], ucp[4],
+									0, hostdata->sx_table);
 					}
+					hostdata->sync_xfer[cmd->device->id] = id;
 #ifdef SYNC_DEBUG
-					printk("sync_xfer=%02x",
+					printk(" sync_xfer=%02x\n",
 					       hostdata->sync_xfer[cmd->device->id]);
 #endif
 					hostdata->sync_stat[cmd->device->id] =
@@ -1486,7 +1535,7 @@ reset_wd33c93(struct Scsi_Host *instance)
 	write_wd33c93(regs, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
 	write_wd33c93(regs, WD_SYNCHRONOUS_TRANSFER,
 		      calc_sync_xfer(hostdata->default_sx_per / 4,
-				     DEFAULT_SX_OFF));
+				     DEFAULT_SX_OFF, 0, hostdata->sx_table));
 	write_wd33c93(regs, WD_COMMAND, WD_CMD_RESET);
 
 
@@ -1512,6 +1561,9 @@ reset_wd33c93(struct Scsi_Host *instance)
 	} else
 		hostdata->chip = C_UNKNOWN_CHIP;
 
+	if (hostdata->chip != C_WD33C93B)	/* Fast SCSI unavailable */
+		hostdata->fast = 0;
+
 	write_wd33c93(regs, WD_TIMEOUT_PERIOD, TIMEOUT_PERIOD_VALUE);
 	write_wd33c93(regs, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
 }
@@ -1533,7 +1585,8 @@ wd33c93_host_reset(struct scsi_cmnd * SCpnt)
 	for (i = 0; i < 8; i++) {
 		hostdata->busy[i] = 0;
 		hostdata->sync_xfer[i] =
-		    calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF);
+			calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF,
+					0, hostdata->sx_table);
 		hostdata->sync_stat[i] = SS_UNSET;	/* using default sync values */
 	}
 	hostdata->input_Q = NULL;
@@ -1782,6 +1835,98 @@ check_setup_args(char *key, int *flags, int *val, char *buf)
 	return ++x;
 }
 
+/*
+ * Calculate internal data-transfer-clock cycle from input-clock
+ * frequency (/MHz) and fill 'sx_table'.
+ *
+ * The original driver used to rely on a fixed sx_table, containing periods
+ * for (only) the lower limits of the respective input-clock-frequency ranges
+ * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with
+ * this setting so far, it might be desirable to adjust the transfer periods
+ * closer to the really attached, possibly 25% higher, input-clock, since
+ * - the wd33c93 may really use a significant shorter period, than it has
+ *   negotiated (eg. thrashing the target, which expects 4/8MHz, with 5/10MHz
+ *   instead).
+ * - the wd33c93 may ask the target for a lower transfer rate, than the target
+ *   is capable of (eg. negotiating for an assumed minimum of 252ns instead of
+ *   possible 200ns, which indeed shows up in tests as an approx. 10% lower
+ *   transfer rate).
+ */
+static inline unsigned int
+round_4(unsigned int x)
+{
+	switch (x & 3) {
+		case 1: --x;
+			break;
+		case 2: ++x;
+		case 3: ++x;
+	}
+	return x;
+}
+
+static void
+calc_sx_table(unsigned int mhz, struct sx_period sx_table[9])
+{
+	unsigned int d, i;
+	if (mhz < 11)
+		d = 2;	/* divisor for  8-10 MHz input-clock */
+	else if (mhz < 16)
+		d = 3;	/* divisor for 12-15 MHz input-clock */
+	else
+		d = 4;	/* divisor for 16-20 MHz input-clock */
+
+	d = (100000 * d) / 2 / mhz; /* 100 x DTCC / nanosec */
+
+	sx_table[0].period_ns = 1;
+	sx_table[0].reg_value = 0x20;
+	for (i = 1; i < 8; i++) {
+		sx_table[i].period_ns = round_4((i+1)*d / 100);
+		sx_table[i].reg_value = (i+1)*0x10;
+	}
+	sx_table[7].reg_value = 0;
+	sx_table[8].period_ns = 0;
+	sx_table[8].reg_value = 0;
+}
+
+/*
+ * check and, maybe, map an init- or "clock:"- argument.
+ */
+static uchar
+set_clk_freq(int freq, int *mhz)
+{
+	int x = freq;
+	if (WD33C93_FS_8_10 == freq)
+		freq = 8;
+	else if (WD33C93_FS_12_15 == freq)
+		freq = 12;
+	else if (WD33C93_FS_16_20 == freq)
+		freq = 16;
+	else if (freq > 7 && freq < 11)
+		x = WD33C93_FS_8_10;
+		else if (freq > 11 && freq < 16)
+		x = WD33C93_FS_12_15;
+		else if (freq > 15 && freq < 21)
+		x = WD33C93_FS_16_20;
+	else {
+			/* Hmm, wouldn't it be safer to assume highest freq here? */
+		x = WD33C93_FS_8_10;
+		freq = 8;
+	}
+	*mhz = freq;
+	return x;
+}
+
+/*
+ * to be used with the resync: fast: ... options
+ */
+static inline void set_resync ( struct WD33C93_hostdata *hd, int mask )
+{
+	int i;
+	for (i = 0; i < 8; i++)
+		if (mask & (1 << i))
+			hd->sync_stat[i] = SS_UNSET;
+}
+
 void
 wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	     dma_setup_t setup, dma_stop_t stop, int clock_freq)
@@ -1798,7 +1943,8 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	hostdata = (struct WD33C93_hostdata *) instance->hostdata;
 
 	hostdata->regs = regs;
-	hostdata->clock_freq = clock_freq;
+	hostdata->clock_freq = set_clk_freq(clock_freq, &i);
+	calc_sx_table(i, hostdata->sx_table);
 	hostdata->dma_setup = setup;
 	hostdata->dma_stop = stop;
 	hostdata->dma_bounce_buffer = NULL;
@@ -1806,7 +1952,8 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	for (i = 0; i < 8; i++) {
 		hostdata->busy[i] = 0;
 		hostdata->sync_xfer[i] =
-		    calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF);
+			calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF,
+					0, hostdata->sx_table);
 		hostdata->sync_stat[i] = SS_UNSET;	/* using default sync values */
 #ifdef PROC_STATISTICS
 		hostdata->cmd_cnt[i] = 0;
@@ -1828,6 +1975,8 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	hostdata->default_sx_per = DEFAULT_SX_PER;
 	hostdata->no_sync = 0xff;	/* sync defaults to off */
 	hostdata->no_dma = 0;	/* default is DMA enabled */
+	hostdata->fast = 0;	/* default is Fast SCSI transfers disabled */
+	hostdata->dma_mode = CTRL_DMA;	/* default is Single Byte DMA */
 
 #ifdef PROC_INTERFACE
 	hostdata->proc = PR_VERSION | PR_INFO | PR_STATISTICS |
@@ -1839,6 +1988,11 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 #endif
 #endif
 
+	if (check_setup_args("clock", &flags, &val, buf)) {
+		hostdata->clock_freq = set_clk_freq(val, &val);
+		calc_sx_table(val, hostdata->sx_table);
+	}
+
 	if (check_setup_args("nosync", &flags, &val, buf))
 		hostdata->no_sync = val;
 
@@ -1847,7 +2001,8 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 
 	if (check_setup_args("period", &flags, &val, buf))
 		hostdata->default_sx_per =
-		    sx_table[round_period((unsigned int) val)].period_ns;
+		    hostdata->sx_table[round_period((unsigned int) val,
+		                                    hostdata->sx_table)].period_ns;
 
 	if (check_setup_args("disconnect", &flags, &val, buf)) {
 		if ((val >= DIS_NEVER) && (val <= DIS_ALWAYS))
@@ -1862,17 +2017,12 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	if (check_setup_args("debug", &flags, &val, buf))
 		hostdata->args = val & DB_MASK;
 
-	if (check_setup_args("clock", &flags, &val, buf)) {
-		if (val > 7 && val < 11)
-			val = WD33C93_FS_8_10;
-		else if (val > 11 && val < 16)
-			val = WD33C93_FS_12_15;
-		else if (val > 15 && val < 21)
-			val = WD33C93_FS_16_20;
-		else
-			val = WD33C93_FS_8_10;
-		hostdata->clock_freq = val;
-	}
+	if (check_setup_args("burst", &flags, &val, buf))
+		hostdata->dma_mode = val ? CTRL_BURST:CTRL_DMA;
+
+	if (WD33C93_FS_16_20 == hostdata->clock_freq /* divisor 4 */
+		&& check_setup_args("fast", &flags, &val, buf))
+		hostdata->fast = !!val;
 
 	if ((i = check_setup_args("next", &flags, &val, buf))) {
 		while (i)
@@ -1917,53 +2067,65 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
 	char tbuf[128];
 	struct WD33C93_hostdata *hd;
 	struct scsi_cmnd *cmd;
-	int x, i;
+	int x;
 	static int stop = 0;
 
 	hd = (struct WD33C93_hostdata *) instance->hostdata;
 
 /* If 'in' is TRUE we need to _read_ the proc file. We accept the following
- * keywords (same format as command-line, but only ONE per read):
+ * keywords (same format as command-line, but arguments are not optional):
  *    debug
  *    disconnect
  *    period
  *    resync
  *    proc
  *    nodma
+ *    level2
+ *    burst
+ *    fast
+ *    nosync
  */
 
 	if (in) {
 		buf[len] = '\0';
-		bp = buf;
+		for (bp = buf; *bp; ) {
+			while (',' == *bp || ' ' == *bp)
+				++bp;
 		if (!strncmp(bp, "debug:", 6)) {
-			bp += 6;
-			hd->args = simple_strtoul(bp, NULL, 0) & DB_MASK;
+				hd->args = simple_strtoul(bp+6, &bp, 0) & DB_MASK;
 		} else if (!strncmp(bp, "disconnect:", 11)) {
-			bp += 11;
-			x = simple_strtoul(bp, NULL, 0);
+				x = simple_strtoul(bp+11, &bp, 0);
 			if (x < DIS_NEVER || x > DIS_ALWAYS)
 				x = DIS_ADAPTIVE;
 			hd->disconnect = x;
 		} else if (!strncmp(bp, "period:", 7)) {
-			bp += 7;
-			x = simple_strtoul(bp, NULL, 0);
+			x = simple_strtoul(bp+7, &bp, 0);
 			hd->default_sx_per =
-			    sx_table[round_period((unsigned int) x)].period_ns;
+				hd->sx_table[round_period((unsigned int) x,
+							  hd->sx_table)].period_ns;
 		} else if (!strncmp(bp, "resync:", 7)) {
-			bp += 7;
-			x = simple_strtoul(bp, NULL, 0);
-			for (i = 0; i < 7; i++)
-				if (x & (1 << i))
-					hd->sync_stat[i] = SS_UNSET;
+				set_resync(hd, (int)simple_strtoul(bp+7, &bp, 0));
 		} else if (!strncmp(bp, "proc:", 5)) {
-			bp += 5;
-			hd->proc = simple_strtoul(bp, NULL, 0);
+				hd->proc = simple_strtoul(bp+5, &bp, 0);
 		} else if (!strncmp(bp, "nodma:", 6)) {
-			bp += 6;
-			hd->no_dma = simple_strtoul(bp, NULL, 0);
+				hd->no_dma = simple_strtoul(bp+6, &bp, 0);
 		} else if (!strncmp(bp, "level2:", 7)) {
-			bp += 7;
-			hd->level2 = simple_strtoul(bp, NULL, 0);
+				hd->level2 = simple_strtoul(bp+7, &bp, 0);
+			} else if (!strncmp(bp, "burst:", 6)) {
+				hd->dma_mode =
+					simple_strtol(bp+6, &bp, 0) ? CTRL_BURST:CTRL_DMA;
+			} else if (!strncmp(bp, "fast:", 5)) {
+				x = !!simple_strtol(bp+5, &bp, 0);
+				if (x != hd->fast)
+					set_resync(hd, 0xff);
+				hd->fast = x;
+			} else if (!strncmp(bp, "nosync:", 7)) {
+				x = simple_strtoul(bp+7, &bp, 0);
+				set_resync(hd, x ^ hd->no_sync);
+				hd->no_sync = x;
+			} else {
+				break; /* unknown keyword,syntax-error,... */
+			}
 		}
 		return len;
 	}
@@ -1977,8 +2139,9 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
 		strcat(bp, tbuf);
 	}
 	if (hd->proc & PR_INFO) {
-		sprintf(tbuf, "\nclock_freq=%02x no_sync=%02x no_dma=%d",
-			hd->clock_freq, hd->no_sync, hd->no_dma);
+		sprintf(tbuf, "\nclock_freq=%02x no_sync=%02x no_dma=%d"
+			" dma_mode=%02x fast=%d",
+			hd->clock_freq, hd->no_sync, hd->no_dma, hd->dma_mode, hd->fast);
 		strcat(bp, tbuf);
 		strcat(bp, "\nsync_xfer[] =       ");
 		for (x = 0; x < 7; x++) {
diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
index edcb036..61ffb86 100644
--- a/drivers/scsi/wd33c93.h
+++ b/drivers/scsi/wd33c93.h
@@ -155,6 +155,9 @@
 #define WD33C93_FS_12_15 OWNID_FS_12
 #define WD33C93_FS_16_20 OWNID_FS_16
 
+   /* pass input-clock explicitely. accepted mhz values are 8-10,12-20 */
+#define WD33C93_FS_MHZ(mhz) (mhz)
+
    /* Control register */
 #define CTRL_HSP     0x01
 #define CTRL_HA      0x02
@@ -253,6 +256,9 @@ struct WD33C93_hostdata {
     uchar            sync_stat[8];     /* status of sync negotiation per target */
     uchar            no_sync;          /* bitmask: don't do sync on these targets */
     uchar            no_dma;           /* set this flag to disable DMA */
+    uchar            dma_mode;         /* DMA Burst Mode or Single Byte DMA */
+    uchar            fast;             /* set this flag to enable Fast SCSI */
+    struct sx_period sx_table[9];      /* transfer periods for actual DTC-setting */
 #ifdef PROC_INTERFACE
     uchar            proc;             /* bitmask: what's in proc output */
 #ifdef PROC_STATISTICS
diff --git a/include/scsi/scsi_tgt_if.h b/include/scsi/scsi_tgt_if.h
index 46d5e70..07d6e77 100644
--- a/include/scsi/scsi_tgt_if.h
+++ b/include/scsi/scsi_tgt_if.h
@@ -83,8 +83,5 @@ struct tgt_event {
 } __attribute__ ((aligned (sizeof(uint64_t))));
 
 #define TGT_RING_SIZE (1UL << 16)
-#define TGT_RING_PAGES (TGT_RING_SIZE >> PAGE_SHIFT)
-#define TGT_EVENT_PER_PAGE (PAGE_SIZE / sizeof(struct tgt_event))
-#define TGT_MAX_EVENTS (TGT_EVENT_PER_PAGE * TGT_RING_PAGES)
 
 #endif
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
index cca1d49..3c18baa 100644
--- a/include/scsi/scsi_transport.h
+++ b/include/scsi/scsi_transport.h
@@ -22,6 +22,7 @@
 
 #include <linux/transport_class.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 
 struct scsi_transport_template {
 	/* the attribute containers */