summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2010-04-22 20:03:35 +0400
committerJeff Garzik <jgarzik@redhat.com>2010-05-14 17:08:02 -0400
commit294440887b32c58d220fb54b73b7a58079b78f20 (patch)
tree83ad03746ca4e7e34fb74cdb2e42b075e085d4da
parent4f2c774856708bccecb74c0e6296e9e2c9136ee1 (diff)
downloadop-kernel-dev-294440887b32c58d220fb54b73b7a58079b78f20.zip
op-kernel-dev-294440887b32c58d220fb54b73b7a58079b78f20.tar.gz
libata-sff: kill unused ata_bus_reset()
... since I see no callers of it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--Documentation/DocBook/libata.tmpl6
-rw-r--r--drivers/ata/libata-sff.c94
-rw-r--r--include/linux/libata.h1
3 files changed, 2 insertions, 99 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index ff3e5be..70b811e 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *);
</programlisting>
<para>
- Called from ata_bus_probe() and ata_bus_reset() error paths,
- as well as when unregistering from the SCSI module (rmmod, hot
- unplug).
+ Called from ata_bus_probe() error path, as well as when
+ unregistering from the SCSI module (rmmod, hot unplug).
This function should do whatever needs to be done to take the
port out of use. In most cases, ata_port_disable() can be used
as this hook.
</para>
<para>
Called from ata_bus_probe() on a failed probe.
- Called from ata_bus_reset() on a failed bus reset.
Called from ata_scsi_release().
</para>
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index e3877b6..b313896 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2631,100 +2631,6 @@ u8 ata_bmdma_status(struct ata_port *ap)
}
EXPORT_SYMBOL_GPL(ata_bmdma_status);
-/**
- * ata_bus_reset - reset host port and associated ATA channel
- * @ap: port to reset
- *
- * This is typically the first time we actually start issuing
- * commands to the ATA channel. We wait for BSY to clear, then
- * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
- * result. Determine what devices, if any, are on the channel
- * by looking at the device 0/1 error register. Look at the signature
- * stored in each device's taskfile registers, to determine if
- * the device is ATA or ATAPI.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host lock.
- *
- * SIDE EFFECTS:
- * Sets ATA_FLAG_DISABLED if bus reset fails.
- *
- * DEPRECATED:
- * This function is only for drivers which still use old EH and
- * will be removed soon.
- */
-void ata_bus_reset(struct ata_port *ap)
-{
- struct ata_device *device = ap->link.device;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- u8 err;
- unsigned int dev0, dev1 = 0, devmask = 0;
- int rc;
-
- DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
-
- /* determine if device 0/1 are present */
- if (ap->flags & ATA_FLAG_SATA_RESET)
- dev0 = 1;
- else {
- dev0 = ata_devchk(ap, 0);
- if (slave_possible)
- dev1 = ata_devchk(ap, 1);
- }
-
- if (dev0)
- devmask |= (1 << 0);
- if (dev1)
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->sff_dev_select(ap, 0);
-
- /* issue bus reset */
- if (ap->flags & ATA_FLAG_SRST) {
- rc = ata_bus_softreset(ap, devmask,
- ata_deadline(jiffies, 40000));
- if (rc && rc != -ENODEV)
- goto err_out;
- }
-
- /*
- * determine by signature whether we have ATA or ATAPI devices
- */
- device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
- if ((slave_possible) && (err != 0x81))
- device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
-
- /* is double-select really necessary? */
- if (device[1].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 1);
- if (device[0].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 0);
-
- /* if no devices were detected, disable this port */
- if ((device[0].class == ATA_DEV_NONE) &&
- (device[1].class == ATA_DEV_NONE))
- goto err_out;
-
- if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
- /* set up device control for ATA_FLAG_SATA_RESET */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- ap->last_ctl = ap->ctl;
- }
-
- DPRINTK("EXIT\n");
- return;
-
-err_out:
- ata_port_printk(ap, KERN_ERR, "disabling port\n");
- ata_port_disable(ap);
-
- DPRINTK("EXIT\n");
-}
-EXPORT_SYMBOL_GPL(ata_bus_reset);
-
#ifdef CONFIG_PCI
/**
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b2f2003..4fa748e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1631,7 +1631,6 @@ extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
-extern void ata_bus_reset(struct ata_port *ap);
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
OpenPOWER on IntegriCloud