sata_fsl: add workaround for data length mismatch on freescale V2 controller

The freescale V2 SATA controller checks if the received data length matches
the programmed length 'ttl', if not, it assumes that this is an error.
In ATAPI, the 'ttl' is based on max allocation length and not the actual
data transfer length, controller will raise 'DLM' (Data length Mismatch)
error bit in Hstatus register. Along with 'DLM', DE (Device error) and
FE (fatal Error) bits are also set in Hstatus register, 'E' (Internal Error)
bit is set in Serror register and CE (Command Error) and DE (Device error)
registers have the corresponding bit set. In this condition, we need to
clear errors in following way: in the service routine, based on 'DLM' flag,
HCONTROL[27] operation clears Hstatus, CE and DE registers, clear Serror
register.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Anju Bhartiya <Anju.Bhartiya@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 35 insertions, 4 deletions

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index d6577b9..124b2c1 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -123,6 +123,7 @@ enum {
 	ONLINE = (1 << 31),
 	GOING_OFFLINE = (1 << 30),
 	BIST_ERR = (1 << 29),
+	CLEAR_ERROR = (1 << 27),
 
 	FATAL_ERR_HC_MASTER_ERR = (1 << 18),
 	FATAL_ERR_PARITY_ERR_TX = (1 << 17),
@@ -143,6 +144,7 @@ enum {
 	    FATAL_ERR_CRC_ERR_RX |
 	    FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
 
+	INT_ON_DATA_LENGTH_MISMATCH = (1 << 12),
 	INT_ON_FATAL_ERR = (1 << 5),
 	INT_ON_PHYRDY_CHG = (1 << 4),
 
@@ -1181,25 +1183,54 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 	u32 hstatus, done_mask = 0;
 	struct ata_queued_cmd *qc;
 	u32 SError;
+	u32 tag;
+	u32 status_mask = INT_ON_ERROR;
 
 	hstatus = ioread32(hcr_base + HSTATUS);
 
 	sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
 
+	/* Read command completed register */
+	done_mask = ioread32(hcr_base + CC);
+
+	/* Workaround for data length mismatch errata */
+	if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) {
+		for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+			qc = ata_qc_from_tag(ap, tag);
+			if (qc && ata_is_atapi(qc->tf.protocol)) {
+				u32 hcontrol;
+				/* Set HControl[27] to clear error registers */
+				hcontrol = ioread32(hcr_base + HCONTROL);
+				iowrite32(hcontrol | CLEAR_ERROR,
+						hcr_base + HCONTROL);
+
+				/* Clear HControl[27] */
+				iowrite32(hcontrol & ~CLEAR_ERROR,
+						hcr_base + HCONTROL);
+
+				/* Clear SError[E] bit */
+				sata_fsl_scr_write(&ap->link, SCR_ERROR,
+						SError);
+
+				/* Ignore fatal error and device error */
+				status_mask &= ~(INT_ON_SINGL_DEVICE_ERR
+						| INT_ON_FATAL_ERR);
+				break;
+			}
+		}
+	}
+
 	if (unlikely(SError & 0xFFFF0000)) {
 		DPRINTK("serror @host_intr : 0x%x\n", SError);
 		sata_fsl_error_intr(ap);
 	}
 
-	if (unlikely(hstatus & INT_ON_ERROR)) {
+	if (unlikely(hstatus & status_mask)) {
 		DPRINTK("error interrupt!!\n");
 		sata_fsl_error_intr(ap);
 		return;
 	}
 
-	/* Read command completed register */
-	done_mask = ioread32(hcr_base + CC);
-
 	VPRINTK("Status of all queues :\n");
 	VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
 		done_mask,