summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-04-01 13:51:59 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-04-01 13:51:59 +0200
commit86d39839bc6bccc9b6b89de8c9c38beb9709f559 (patch)
tree4b3afdf6e5b497d31b76e3bc8ba747d637b1a63f
parent911a88829725572820dad9a168e735c606a2fdcb (diff)
parent66bee35f29683fc4a9a530a1c56a0ec45e3f7d72 (diff)
downloadop-kernel-dev-86d39839bc6bccc9b6b89de8c9c38beb9709f559.zip
op-kernel-dev-86d39839bc6bccc9b6b89de8c9c38beb9709f559.tar.gz
Merge tag 'extcon-next-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes: Update extcon for v4.1 This patchset include two new extcon driver and fix minor issue of extcon driver. Detailed description for patchset: 1. new extcon-max77843.c and extcon-usb-gpio.c extcon driver - extcon-max77843.c driver support the MAXIM MAX77843 MUIC (Micor-USB Interface Controller) device which handles the various external connectors such as TA/USB /USB-HOST/JIG and so on. - extcon-usb-gpio.c driver support the USB and USB-HOST cable detection by using the GPIO pin which is connected to USB ID pin. This GPIO pin updates the USB cable states. 2. Rename the filename of extcon core driver and add missing locking mechanism - Rename the previous extcon-class driver.c as extcon.c because '-class' postfix is not necessary word. - extcon core driver (extcon.c) used the raw_notifier_chain. It must be protected by locking mechanism to avoid the list changing while extcon_update_state() is executed. 3. Fix minor issue of extcon drviers - Fix cable name by using the capital letter instead of small letter on extcon-max77693.c driver. - Clean-up code of extcon-arizona.c to detect headphone cable. - Fix the wrong return type and variable type on extcon-max77843.c. - Fix the checkpatch warning of all extcon drivers.
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt18
-rw-r--r--drivers/extcon/Kconfig17
-rw-r--r--drivers/extcon/Makefile4
-rw-r--r--drivers/extcon/extcon-arizona.c49
-rw-r--r--drivers/extcon/extcon-max14577.c5
-rw-r--r--drivers/extcon/extcon-max77693.c37
-rw-r--r--drivers/extcon/extcon-max77843.c881
-rw-r--r--drivers/extcon/extcon-max8997.c5
-rw-r--r--drivers/extcon/extcon-rt8973a.c6
-rw-r--r--drivers/extcon/extcon-sm5502.c6
-rw-r--r--drivers/extcon/extcon-usb-gpio.c237
-rw-r--r--drivers/extcon/extcon.c (renamed from drivers/extcon/extcon-class.c)36
-rw-r--r--include/linux/mfd/arizona/core.h2
-rw-r--r--sound/soc/codecs/arizona.c4
14 files changed, 1248 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
new file mode 100644
index 0000000..af0b903
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
@@ -0,0 +1,18 @@
+USB GPIO Extcon device
+
+This is a virtual device used to generate USB cable states from the USB ID pin
+connected to a GPIO pin.
+
+Required properties:
+- compatible: Should be "linux,extcon-usb-gpio"
+- id-gpio: gpio for USB ID pin. See gpio binding.
+
+Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
+ extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ }
+
+ &omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+ };
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 6a1f7de..fdc0bf0 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -55,6 +55,16 @@ config EXTCON_MAX77693
Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
detector and switch.
+config EXTCON_MAX77843
+ tristate "MAX77843 EXTCON Support"
+ depends on MFD_MAX77843
+ select IRQ_DOMAIN
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
+ detector add switch.
+
config EXTCON_MAX8997
tristate "MAX8997 EXTCON Support"
depends on MFD_MAX8997 && IRQ_DOMAIN
@@ -93,4 +103,11 @@ config EXTCON_SM5502
Silicon Mitus SM5502. The SM5502 is a USB port accessory
detector and switch.
+config EXTCON_USB_GPIO
+ tristate "USB GPIO extcon support"
+ depends on GPIOLIB
+ help
+ Say Y here to enable GPIO based USB cable detection extcon support.
+ Used typically if GPIO is used for USB ID pin detection.
+
endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 0370b42..9204114 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,13 +2,15 @@
# Makefile for external connector class (extcon) devices
#
-obj-$(CONFIG_EXTCON) += extcon-class.o
+obj-$(CONFIG_EXTCON) += extcon.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
+obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
+obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 63f01c4..d9e763c 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -136,18 +136,35 @@ static const char *arizona_cable[] = {
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
-static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
- unsigned int magic)
+static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
+ bool clamp)
{
struct arizona *arizona = info->arizona;
+ unsigned int mask = 0, val = 0;
int ret;
+ switch (arizona->type) {
+ case WM5110:
+ mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
+ ARIZONA_HP1L_SHRTI;
+ if (clamp)
+ val = ARIZONA_HP1L_SHRTO;
+ else
+ val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI;
+ break;
+ default:
+ mask = ARIZONA_RMV_SHRT_HP1L;
+ if (clamp)
+ val = ARIZONA_RMV_SHRT_HP1L;
+ break;
+ };
+
mutex_lock(&arizona->dapm->card->dapm_mutex);
- arizona->hpdet_magic = magic;
+ arizona->hpdet_clamp = clamp;
- /* Keep the HP output stages disabled while doing the magic */
- if (magic) {
+ /* Keep the HP output stages disabled while doing the clamp */
+ if (clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -158,20 +175,20 @@ static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
ret);
}
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
+ mask, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
- magic);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
+ mask, val);
if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);
- /* Restore the desired state while not doing the magic */
- if (!magic) {
+ /* Restore the desired state while not doing the clamp */
+ if (!clamp) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
@@ -603,7 +620,7 @@ done:
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
- arizona_extcon_do_magic(info, 0);
+ arizona_extcon_hp_clamp(info, false);
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@@ -648,7 +665,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
if (info->mic)
arizona_stop_mic(info);
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
@@ -699,7 +716,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
info->hpdet_active = true;
- arizona_extcon_do_magic(info, 0x4000);
+ arizona_extcon_hp_clamp(info, true);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index c1bf0cf..3823aa4 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -539,8 +539,6 @@ static void max14577_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
/*
@@ -730,8 +728,7 @@ static int max14577_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
return ret;
}
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index af165fd..a66bec8 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -190,8 +190,8 @@ enum max77693_muic_acc_type {
/* The below accessories have same ADC value so ADCLow and
ADC1K bit is used to separate specific accessory */
/* ADC|VBVolot|ADCLow|ADC1K| */
- MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */
- MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */
+ MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */
MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */
MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */
MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */
@@ -228,7 +228,7 @@ static const char *max77693_extcon_cable[] = {
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
- [EXTCON_CABLE_MHL_TA] = "MHL_TA",
+ [EXTCON_CABLE_MHL_TA] = "MHL-TA",
[EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
@@ -403,8 +403,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
/**
* [0x1|VBVolt|ADCLow|ADC1K]
- * [0x1| 0| 0| 0] USB_OTG
- * [0x1| 1| 0| 0] USB_OTG_VB
+ * [0x1| 0| 0| 0] USB_HOST
+ * [0x1| 1| 0| 0] USB_HSOT_VB
* [0x1| 0| 1| 0] Audio Video cable with load
* [0x1| 0| 1| 1] MHL without charging cable
* [0x1| 1| 1| 1] MHL with charging cable
@@ -523,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
* - Support charging and data connection through micro-usb port
* if USB cable is connected between target and host
* device.
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb, attached);
if (ret < 0)
@@ -609,9 +609,9 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
MAX77693_CABLE_GROUP_ADC_GND, &attached);
switch (cable_type_gnd) {
- case MAX77693_MUIC_GND_USB_OTG:
- case MAX77693_MUIC_GND_USB_OTG_VB:
- /* USB_OTG, PATH: AP_USB */
+ case MAX77693_MUIC_GND_USB_HOST:
+ case MAX77693_MUIC_GND_USB_HOST_VB:
+ /* USB_HOST, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
@@ -704,7 +704,7 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info)
switch (cable_type) {
case MAX77693_MUIC_ADC_GROUND:
- /* USB_OTG/MHL/Audio */
+ /* USB_HOST/MHL/Audio */
max77693_muic_adc_ground_handler(info);
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
@@ -823,19 +823,19 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/*
- * MHL cable with MHL_TA(USB/TA) cable
+ * MHL cable with MHL-TA(USB/TA) cable
* - MHL cable include two port(HDMI line and separate
* micro-usb port. When the target connect MHL cable,
- * extcon driver check whether MHL_TA(USB/TA) cable is
- * connected. If MHL_TA cable is connected, extcon
+ * extcon driver check whether MHL-TA(USB/TA) cable is
+ * connected. If MHL-TA cable is connected, extcon
* driver notify state to notifiee for charging battery.
*
- * Features of 'MHL_TA(USB/TA) with MHL cable'
+ * Features of 'MHL-TA(USB/TA) with MHL cable'
* - Support MHL
* - Support charging through micro-usb port without
* data connection
*/
- extcon_set_cable_state(info->edev, "MHL_TA", attached);
+ extcon_set_cable_state(info->edev, "MHL-TA", attached);
if (!cable_attached)
extcon_set_cable_state(info->edev,
"MHL", cable_attached);
@@ -886,7 +886,7 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
* - Support charging and data connection through micro-
* usb port if USB cable is connected between target
* and host device
- * - Support OTG device (Mouse/Keyboard)
+ * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
*/
ret = max77693_muic_set_path(info, info->path_usb,
attached);
@@ -1019,8 +1019,6 @@ static void max77693_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
static irqreturn_t max77693_muic_irq_handler(int irq, void *data)
@@ -1171,8 +1169,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
return ret;
}
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
new file mode 100644
index 0000000..8db6a92
--- /dev/null
+++ b/drivers/extcon/extcon-max77843.c
@@ -0,0 +1,881 @@
+/*
+ * extcon-max77843.c - Maxim MAX77843 extcon driver to support
+ * MUIC(Micro USB Interface Controller)
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/extcon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */
+
+enum max77843_muic_status {
+ MAX77843_MUIC_STATUS1 = 0,
+ MAX77843_MUIC_STATUS2,
+ MAX77843_MUIC_STATUS3,
+
+ MAX77843_MUIC_STATUS_NUM,
+};
+
+struct max77843_muic_info {
+ struct device *dev;
+ struct max77843 *max77843;
+ struct extcon_dev *edev;
+
+ struct mutex mutex;
+ struct work_struct irq_work;
+ struct delayed_work wq_detcable;
+
+ u8 status[MAX77843_MUIC_STATUS_NUM];
+ int prev_cable_type;
+ int prev_chg_type;
+ int prev_gnd_type;
+
+ bool irq_adc;
+ bool irq_chg;
+};
+
+enum max77843_muic_cable_group {
+ MAX77843_CABLE_GROUP_ADC = 0,
+ MAX77843_CABLE_GROUP_ADC_GND,
+ MAX77843_CABLE_GROUP_CHG,
+};
+
+enum max77843_muic_adc_debounce_time {
+ MAX77843_DEBOUNCE_TIME_5MS = 0,
+ MAX77843_DEBOUNCE_TIME_10MS,
+ MAX77843_DEBOUNCE_TIME_25MS,
+ MAX77843_DEBOUNCE_TIME_38_62MS,
+};
+
+/* Define accessory cable type */
+enum max77843_muic_accessory_type {
+ MAX77843_MUIC_ADC_GROUND = 0,
+ MAX77843_MUIC_ADC_SEND_END_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
+ MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
+ MAX77843_MUIC_ADC_RESERVED_ACC_1,
+ MAX77843_MUIC_ADC_RESERVED_ACC_2,
+ MAX77843_MUIC_ADC_RESERVED_ACC_3,
+ MAX77843_MUIC_ADC_RESERVED_ACC_4,
+ MAX77843_MUIC_ADC_RESERVED_ACC_5,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
+ MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
+ MAX77843_MUIC_ADC_TTY_CONVERTER,
+ MAX77843_MUIC_ADC_UART_CABLE,
+ MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
+ MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
+ MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
+ MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
+ MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
+ MAX77843_MUIC_ADC_OPEN,
+
+ /* The blow accessories should check
+ not only ADC value but also ADC1K and VBVolt value. */
+ /* Offset|ADC1K|VBVolt| */
+ MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */
+ MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */
+ MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */
+ MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */
+};
+
+/* Define charger cable type */
+enum max77843_muic_charger_type {
+ MAX77843_MUIC_CHG_NONE = 0,
+ MAX77843_MUIC_CHG_USB,
+ MAX77843_MUIC_CHG_DOWNSTREAM,
+ MAX77843_MUIC_CHG_DEDICATED,
+ MAX77843_MUIC_CHG_SPECIAL_500MA,
+ MAX77843_MUIC_CHG_SPECIAL_1A,
+ MAX77843_MUIC_CHG_SPECIAL_BIAS,
+ MAX77843_MUIC_CHG_RESERVED,
+ MAX77843_MUIC_CHG_GND,
+};
+
+enum {
+ MAX77843_CABLE_USB = 0,
+ MAX77843_CABLE_USB_HOST,
+ MAX77843_CABLE_TA,
+ MAX77843_CABLE_CHARGE_DOWNSTREAM,
+ MAX77843_CABLE_FAST_CHARGER,
+ MAX77843_CABLE_SLOW_CHARGER,
+ MAX77843_CABLE_MHL,
+ MAX77843_CABLE_MHL_TA,
+ MAX77843_CABLE_JIG_USB_ON,
+ MAX77843_CABLE_JIG_USB_OFF,
+ MAX77843_CABLE_JIG_UART_ON,
+ MAX77843_CABLE_JIG_UART_OFF,
+
+ MAX77843_CABLE_NUM,
+};
+
+static const char *max77843_extcon_cable[] = {
+ [MAX77843_CABLE_USB] = "USB",
+ [MAX77843_CABLE_USB_HOST] = "USB-HOST",
+ [MAX77843_CABLE_TA] = "TA",
+ [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
+ [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
+ [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
+ [MAX77843_CABLE_MHL] = "MHL",
+ [MAX77843_CABLE_MHL_TA] = "MHL-TA",
+ [MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
+ [MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
+ [MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+ [MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+};
+
+struct max77843_muic_irq {
+ unsigned int irq;
+ const char *name;
+ unsigned int virq;
+};
+
+static struct max77843_muic_irq max77843_muic_irqs[] = {
+ { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
+ { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
+ { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
+ { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
+ { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
+ { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
+ { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
+ { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
+ { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
+ { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
+ { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
+ { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
+ { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
+ { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
+ { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
+ { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
+};
+
+static const struct regmap_config max77843_muic_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77843_MUIC_REG_END,
+};
+
+static const struct regmap_irq max77843_muic_irq[] = {
+ /* INT1 interrupt */
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
+ { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
+
+ /* INT2 interrupt */
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
+ { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
+
+ /* INT3 interrupt */
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
+ { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
+};
+
+static const struct regmap_irq_chip max77843_muic_irq_chip = {
+ .name = "max77843-muic",
+ .status_base = MAX77843_MUIC_REG_INT1,
+ .mask_base = MAX77843_MUIC_REG_INTMASK1,
+ .mask_invert = true,
+ .num_regs = 3,
+ .irqs = max77843_muic_irq,
+ .num_irqs = ARRAY_SIZE(max77843_muic_irq),
+};
+
+static int max77843_muic_set_path(struct max77843_muic_info *info,
+ u8 val, bool attached)
+{
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+ unsigned int ctrl1, ctrl2;
+
+ if (attached)
+ ctrl1 = val;
+ else
+ ctrl1 = CONTROL1_SW_OPEN;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL1,
+ CONTROL1_COM_SW, ctrl1);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot switch MUIC port\n");
+ return ret;
+ }
+
+ if (attached)
+ ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
+ else
+ ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
+
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL2,
+ MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
+ MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot update lowpower mode\n");
+ return ret;
+ }
+
+ dev_dbg(info->dev,
+ "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+ ctrl1, ctrl2, attached ? "attached" : "detached");
+
+ return 0;
+}
+
+static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
+ enum max77843_muic_cable_group group, bool *attached)
+{
+ int adc, chg_type, cable_type, gnd_type;
+
+ adc = info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC_MASK;
+ adc >>= STATUS1_ADC_SHIFT;
+
+ switch (group) {
+ case MAX77843_CABLE_GROUP_ADC:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_cable_type;
+ info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+ cable_type = info->prev_cable_type = adc;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_CHG:
+ chg_type = info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_CHGTYP_MASK;
+
+ /* Check GROUND accessory with charger cable */
+ if (adc == MAX77843_MUIC_ADC_GROUND) {
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ /* The following state when charger cable is
+ * disconnected but the GROUND accessory still
+ * connected */
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+
+ /* The following state when charger cable is
+ * connected on the GROUND accessory */
+ *attached = true;
+ cable_type = MAX77843_MUIC_CHG_GND;
+ info->prev_chg_type = MAX77843_MUIC_CHG_GND;
+ }
+ break;
+ }
+
+ if (chg_type == MAX77843_MUIC_CHG_NONE) {
+ *attached = false;
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+ } else {
+ *attached = true;
+ cable_type = info->prev_chg_type = chg_type;
+ }
+ break;
+ case MAX77843_CABLE_GROUP_ADC_GND:
+ if (adc == MAX77843_MUIC_ADC_OPEN) {
+ *attached = false;
+ cable_type = info->prev_gnd_type;
+ info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+
+ /* Offset|ADC1K|VBVolt|
+ * 0x1| 0| 0| USB-HOST
+ * 0x1| 0| 1| USB-HOST with VB
+ * 0x1| 1| 0| MHL
+ * 0x1| 1| 1| MHL with VB */
+ /* Get ADC1K register bit */
+ gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
+ MAX77843_MUIC_STATUS1_ADC1K_MASK);
+
+ /* Get VBVolt register bit */
+ gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
+ MAX77843_MUIC_STATUS2_VBVOLT_MASK);
+ gnd_type >>= STATUS2_VBVOLT_SHIFT;
+
+ /* Offset of GND cable */
+ gnd_type |= MAX77843_MUIC_GND_USB_HOST;
+ cable_type = info->prev_gnd_type = gnd_type;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Unknown cable group (%d)\n", group);
+ cable_type = -EINVAL;
+ break;
+ }
+
+ return cable_type;
+}
+
+static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
+{
+ int ret, gnd_cable_type;
+ bool attached;
+
+ gnd_cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+ dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+
+ switch (gnd_cable_type) {
+ case MAX77843_MUIC_GND_USB_HOST:
+ case MAX77843_MUIC_GND_USB_HOST_VB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB-HOST", attached);
+ break;
+ case MAX77843_MUIC_GND_MHL_VB:
+ case MAX77843_MUIC_GND_MHL:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "MHL", attached);
+ break;
+ default:
+ dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
+ attached ? "attached" : "detached", gnd_cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_jig_handler(struct max77843_muic_info *info,
+ int cable_type, bool attached)
+{
+ int ret;
+
+ dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
+ attached ? "attached" : "detached", cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
+ if (ret < 0)
+ return ret;
+ extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+ break;
+ default:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_adc_handler(struct max77843_muic_info *info)
+{
+ int ret, cable_type;
+ bool attached;
+
+ cable_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type,
+ info->prev_cable_type);
+
+ switch (cable_type) {
+ case MAX77843_MUIC_ADC_GROUND:
+ ret = max77843_muic_adc_gnd_handler(info);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ ret = max77843_muic_jig_handler(info, cable_type, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX77843_MUIC_ADC_SEND_END_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
+ case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_1:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_2:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_3:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_4:
+ case MAX77843_MUIC_ADC_RESERVED_ACC_5:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
+ case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
+ case MAX77843_MUIC_ADC_TTY_CONVERTER:
+ case MAX77843_MUIC_ADC_UART_CABLE:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
+ case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
+ case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
+ case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
+ case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
+ case MAX77843_MUIC_ADC_OPEN:
+ dev_err(info->dev,
+ "accessory is %s but it isn't used (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EAGAIN;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_muic_chg_handler(struct max77843_muic_info *info)
+{
+ int ret, chg_type, gnd_type;
+ bool attached;
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+ attached ? "attached" : "detached",
+ chg_type, info->prev_chg_type);
+
+ switch (chg_type) {
+ case MAX77843_MUIC_CHG_USB:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB", attached);
+ break;
+ case MAX77843_MUIC_CHG_DOWNSTREAM:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev,
+ "CHARGER-DOWNSTREAM", attached);
+ break;
+ case MAX77843_MUIC_CHG_DEDICATED:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "TA", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_500MA:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_SPECIAL_1A:
+ ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+ break;
+ case MAX77843_MUIC_CHG_GND:
+ gnd_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC_GND, &attached);
+
+ /* Charger cable on MHL accessory is attach or detach */
+ if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
+ extcon_set_cable_state(info->edev, "MHL-TA", true);
+ else if (gnd_type == MAX77843_MUIC_GND_MHL)
+ extcon_set_cable_state(info->edev, "MHL-TA", false);
+ break;
+ case MAX77843_MUIC_CHG_NONE:
+ break;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (chg_type:0x%x)\n",
+ attached ? "attached" : "detached", chg_type);
+
+ max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void max77843_muic_irq_work(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(work,
+ struct max77843_muic_info, irq_work);
+ struct max77843 *max77843 = info->max77843;
+ int ret = 0;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->irq_adc) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown cable type\n");
+ info->irq_adc = false;
+ }
+
+ if (info->irq_chg) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret)
+ dev_err(info->dev, "Unknown charger type\n");
+ info->irq_chg = false;
+ }
+
+ mutex_unlock(&info->mutex);
+}
+
+static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
+{
+ struct max77843_muic_info *info = data;
+ int i, irq_type = -1;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
+ if (irq == max77843_muic_irqs[i].virq)
+ irq_type = max77843_muic_irqs[i].irq;
+
+ switch (irq_type) {
+ case MAX77843_MUIC_IRQ_INT1_ADC:
+ case MAX77843_MUIC_IRQ_INT1_ADCERROR:
+ case MAX77843_MUIC_IRQ_INT1_ADC1K:
+ info->irq_adc = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT2_CHGTYP:
+ case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
+ case MAX77843_MUIC_IRQ_INT2_DCDTMR:
+ case MAX77843_MUIC_IRQ_INT2_DXOVP:
+ case MAX77843_MUIC_IRQ_INT2_VBVOLT:
+ info->irq_chg = true;
+ break;
+ case MAX77843_MUIC_IRQ_INT3_VBADC:
+ case MAX77843_MUIC_IRQ_INT3_VDNMON:
+ case MAX77843_MUIC_IRQ_INT3_DNRES:
+ case MAX77843_MUIC_IRQ_INT3_MPNACK:
+ case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
+ case MAX77843_MUIC_IRQ_INT3_MRXTRF:
+ case MAX77843_MUIC_IRQ_INT3_MRXPERR:
+ case MAX77843_MUIC_IRQ_INT3_MRXRDY:
+ break;
+ default:
+ dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
+ break;
+ }
+
+ schedule_work(&info->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void max77843_muic_detect_cable_wq(struct work_struct *work)
+{
+ struct max77843_muic_info *info = container_of(to_delayed_work(work),
+ struct max77843_muic_info, wq_detcable);
+ struct max77843 *max77843 = info->max77843;
+ int chg_type, adc, ret;
+ bool attached;
+
+ mutex_lock(&info->mutex);
+
+ ret = regmap_bulk_read(max77843->regmap_muic,
+ MAX77843_MUIC_REG_STATUS1, info->status,
+ MAX77843_MUIC_STATUS_NUM);
+ if (ret) {
+ dev_err(info->dev, "Cannot read STATUS registers\n");
+ goto err_cable_wq;
+ }
+
+ adc = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_ADC, &attached);
+ if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
+ ret = max77843_muic_adc_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+ chg_type = max77843_muic_get_cable_type(info,
+ MAX77843_CABLE_GROUP_CHG, &attached);
+ if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
+ ret = max77843_muic_chg_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect charger accessory\n");
+ goto err_cable_wq;
+ }
+ }
+
+err_cable_wq:
+ mutex_unlock(&info->mutex);
+}
+
+static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
+ enum max77843_muic_adc_debounce_time time)
+{
+ struct max77843 *max77843 = info->max77843;
+ int ret;
+
+ switch (time) {
+ case MAX77843_DEBOUNCE_TIME_5MS:
+ case MAX77843_DEBOUNCE_TIME_10MS:
+ case MAX77843_DEBOUNCE_TIME_25MS:
+ case MAX77843_DEBOUNCE_TIME_38_62MS:
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
+ time << CONTROL4_ADCDBSET_SHIFT);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot write MUIC regmap\n");
+ return ret;
+ }
+ break;
+ default:
+ dev_err(info->dev, "Invalid ADC debounce time\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max77843_init_muic_regmap(struct max77843 *max77843)
+{
+ int ret;
+
+ max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
+ I2C_ADDR_MUIC);
+ if (!max77843->i2c_muic) {
+ dev_err(&max77843->i2c->dev,
+ "Cannot allocate I2C device for MUIC\n");
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(max77843->i2c_muic, max77843);
+
+ max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
+ &max77843_muic_regmap_config);
+ if (IS_ERR(max77843->regmap_muic)) {
+ ret = PTR_ERR(max77843->regmap_muic);
+ goto err_muic_i2c;
+ }
+
+ ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+ 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
+ if (ret < 0) {
+ dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
+ goto err_muic_i2c;
+ }
+
+ return 0;
+
+err_muic_i2c:
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_muic_info *info;
+ unsigned int id;
+ int i, ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &pdev->dev;
+ info->max77843 = max77843;
+
+ platform_set_drvdata(pdev, info);
+ mutex_init(&info->mutex);
+
+ /* Initialize i2c and regmap */
+ ret = max77843_init_muic_regmap(max77843);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
+ return ret;
+ }
+
+ /* Turn off auto detection configuration */
+ ret = regmap_update_bits(max77843->regmap_muic,
+ MAX77843_MUIC_REG_CONTROL4,
+ MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
+ MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
+ CONTROL4_AUTO_DISABLE);
+
+ /* Initialize extcon device */
+ info->edev = devm_extcon_dev_allocate(&pdev->dev,
+ max77843_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
+ ret = -ENODEV;
+ goto err_muic_irq;
+ }
+
+ ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register extcon device\n");
+ goto err_muic_irq;
+ }
+
+ /* Set ADC debounce time */
+ max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
+
+ /* Set initial path for UART */
+ max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+
+ /* Check revision number of MUIC device */
+ ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read revision number\n");
+ goto err_muic_irq;
+ }
+ dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
+
+ /* Support virtual irq domain for max77843 MUIC device */
+ INIT_WORK(&info->irq_work, max77843_muic_irq_work);
+
+ for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
+ struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
+ unsigned int virq = 0;
+
+ virq = regmap_irq_get_virq(max77843->irq_data_muic,
+ muic_irq->irq);
+ if (virq <= 0) {
+ ret = -EINVAL;
+ goto err_muic_irq;
+ }
+ muic_irq->virq = virq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+ max77843_muic_irq_handler, IRQF_NO_SUSPEND,
+ muic_irq->name, info);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request irq (IRQ: %d, error: %d)\n",
+ muic_irq->irq, ret);
+ goto err_muic_irq;
+ }
+ }
+
+ /* Detect accessory after completing the initialization of platform */
+ INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
+ queue_delayed_work(system_power_efficient_wq,
+ &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+ return 0;
+
+err_muic_irq:
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return ret;
+}
+
+static int max77843_muic_remove(struct platform_device *pdev)
+{
+ struct max77843_muic_info *info = platform_get_drvdata(pdev);
+ struct max77843 *max77843 = info->max77843;
+
+ cancel_work_sync(&info->irq_work);
+ regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
+ i2c_unregister_device(max77843->i2c_muic);
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_muic_id[] = {
+ { "max77843-muic", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, max77843_muic_id);
+
+static struct platform_driver max77843_muic_driver = {
+ .driver = {
+ .name = "max77843-muic",
+ },
+ .probe = max77843_muic_probe,
+ .remove = max77843_muic_remove,
+ .id_table = max77843_muic_id,
+};
+
+static int __init max77843_muic_init(void)
+{
+ return platform_driver_register(&max77843_muic_driver);
+}
+subsys_initcall(max77843_muic_init);
+
+MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index fc1678f..5774e56 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -579,8 +579,6 @@ static void max8997_muic_irq_work(struct work_struct *work)
dev_err(info->dev, "failed to handle MUIC interrupt\n");
mutex_unlock(&info->mutex);
-
- return;
}
static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
@@ -689,8 +687,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
muic_irq->name, info);
if (ret) {
dev_err(&pdev->dev,
- "failed: irq request (IRQ: %d,"
- " error :%d)\n",
+ "failed: irq request (IRQ: %d, error :%d)\n",
muic_irq->irq, ret);
goto err_irq;
}
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index a784b2d..9ccd5af 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -582,10 +582,8 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
return -EINVAL;
info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(&i2c->dev, "failed to allocate memory\n");
+ if (!info)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, info);
info->dev = &i2c->dev;
@@ -681,7 +679,7 @@ static int rt8973a_muic_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static struct of_device_id rt8973a_dt_match[] = {
+static const struct of_device_id rt8973a_dt_match[] = {
{ .compatible = "richtek,rt8973a-muic" },
{ },
};
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index b0f7bd8..2f93cf3 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -359,8 +359,8 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
break;
default:
dev_dbg(info->dev,
- "cannot identify the cable type: adc(0x%x) "
- "dev_type1(0x%x)\n", adc, dev_type1);
+ "cannot identify the cable type: adc(0x%x)\n",
+ adc);
return -EINVAL;
};
break;
@@ -659,7 +659,7 @@ static int sm5502_muic_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static struct of_device_id sm5502_dt_match[] = {
+static const struct of_device_id sm5502_dt_match[] = {
{ .compatible = "siliconmitus,sm5502-muic" },
{ },
};
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
new file mode 100644
index 0000000..de67fce
--- /dev/null
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -0,0 +1,237 @@
+/**
+ * drivers/extcon/extcon-usb-gpio.c - USB GPIO extcon driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_GPIO_DEBOUNCE_MS 20 /* ms */
+
+struct usb_extcon_info {
+ struct device *dev;
+ struct extcon_dev *edev;
+
+ struct gpio_desc *id_gpiod;
+ int id_irq;
+
+ unsigned long debounce_jiffies;
+ struct delayed_work wq_detcable;
+};
+
+/* List of detectable cables */
+enum {
+ EXTCON_CABLE_USB = 0,
+ EXTCON_CABLE_USB_HOST,
+
+ EXTCON_CABLE_END,
+};
+
+static const char *usb_extcon_cable[] = {
+ [EXTCON_CABLE_USB] = "USB",
+ [EXTCON_CABLE_USB_HOST] = "USB-HOST",
+ NULL,
+};
+
+static void usb_extcon_detect_cable(struct work_struct *work)
+{
+ int id;
+ struct usb_extcon_info *info = container_of(to_delayed_work(work),
+ struct usb_extcon_info,
+ wq_detcable);
+
+ /* check ID and update cable state */
+ id = gpiod_get_value_cansleep(info->id_gpiod);
+ if (id) {
+ /*
+ * ID = 1 means USB HOST cable detached.
+ * As we don't have event for USB peripheral cable attached,
+ * we simulate USB peripheral attach here.
+ */
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB_HOST],
+ false);
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB],
+ true);
+ } else {
+ /*
+ * ID = 0 means USB HOST cable attached.
+ * As we don't have event for USB peripheral cable detached,
+ * we simulate USB peripheral detach here.
+ */
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB],
+ false);
+ extcon_set_cable_state(info->edev,
+ usb_extcon_cable[EXTCON_CABLE_USB_HOST],
+ true);
+ }
+}
+
+static irqreturn_t usb_irq_handler(int irq, void *dev_id)
+{
+ struct usb_extcon_info *info = dev_id;
+
+ queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+ info->debounce_jiffies);
+
+ return IRQ_HANDLED;
+}
+
+static int usb_extcon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct usb_extcon_info *info;
+ int ret;
+
+ if (!np)
+ return -EINVAL;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = dev;
+ info->id_gpiod = devm_gpiod_get(&pdev->dev, "id");
+ if (IS_ERR(info->id_gpiod)) {
+ dev_err(dev, "failed to get ID GPIO\n");
+ return PTR_ERR(info->id_gpiod);
+ }
+
+ ret = gpiod_set_debounce(info->id_gpiod,
+ USB_GPIO_DEBOUNCE_MS * 1000);
+ if (ret < 0)
+ info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
+
+ INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
+
+ info->id_irq = gpiod_to_irq(info->id_gpiod);
+ if (info->id_irq < 0) {
+ dev_err(dev, "failed to get ID IRQ\n");
+ return info->id_irq;
+ }
+
+ ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+ usb_irq_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+
+ info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_extcon_dev_register(dev, info->edev);
+ if (ret < 0) {
+ dev_err(dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ device_init_wakeup(dev, 1);
+
+ /* Perform initial detection */
+ usb_extcon_detect_cable(&info->wq_detcable.work);
+
+ return 0;
+}
+
+static int usb_extcon_remove(struct platform_device *pdev)
+{
+ struct usb_extcon_info *info = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&info->wq_detcable);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int usb_extcon_suspend(struct device *dev)
+{
+ struct usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev)) {
+ ret = enable_irq_wake(info->id_irq);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We don't want to process any IRQs after this point
+ * as GPIOs used behind I2C subsystem might not be
+ * accessible until resume completes. So disable IRQ.
+ */
+ disable_irq(info->id_irq);
+
+ return ret;
+}
+
+static int usb_extcon_resume(struct device *dev)
+{
+ struct usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev)) {
+ ret = disable_irq_wake(info->id_irq);
+ if (ret)
+ return ret;
+ }
+
+ enable_irq(info->id_irq);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usb_extcon_pm_ops,
+ usb_extcon_suspend, usb_extcon_resume);
+
+static const struct of_device_id usb_extcon_dt_match[] = {
+ { .compatible = "linux,extcon-usb-gpio", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usb_extcon_dt_match);
+
+static struct platform_driver usb_extcon_driver = {
+ .probe = usb_extcon_probe,
+ .remove = usb_extcon_remove,
+ .driver = {
+ .name = "extcon-usb-gpio",
+ .pm = &usb_extcon_pm_ops,
+ .of_match_table = usb_extcon_dt_match,
+ },
+};
+
+module_platform_driver(usb_extcon_driver);
+
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_DESCRIPTION("USB GPIO extcon driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon.c
index 8319f25..4c9f165 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon.c
@@ -158,6 +158,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
/* Optional callback given by the user */
if (edev->print_name) {
int ret = edev->print_name(edev, buf);
+
if (ret >= 0)
return ret;
}
@@ -444,6 +445,9 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
const char *extcon_name, const char *cable_name,
struct notifier_block *nb)
{
+ unsigned long flags;
+ int ret;
+
if (!obj || !cable_name || !nb)
return -EINVAL;
@@ -461,8 +465,11 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
obj->internal_nb.notifier_call = _call_per_cable;
- return raw_notifier_chain_register(&obj->edev->nh,
+ spin_lock_irqsave(&obj->edev->lock, flags);
+ ret = raw_notifier_chain_register(&obj->edev->nh,
&obj->internal_nb);
+ spin_unlock_irqrestore(&obj->edev->lock, flags);
+ return ret;
} else {
struct class_dev_iter iter;
struct extcon_dev *extd;
@@ -495,10 +502,17 @@ EXPORT_SYMBOL_GPL(extcon_register_interest);
*/
int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
{
+ unsigned long flags;
+ int ret;
+
if (!obj)
return -EINVAL;
- return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+ spin_lock_irqsave(&obj->edev->lock, flags);
+ ret = raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+ spin_unlock_irqrestore(&obj->edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_unregister_interest);
@@ -515,7 +529,14 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest);
int extcon_register_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
{
- return raw_notifier_chain_register(&edev->nh, nb);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&edev->lock, flags);
+ ret = raw_notifier_chain_register(&edev->nh, nb);
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_register_notifier);
@@ -527,7 +548,14 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier);
int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
{
- return raw_notifier_chain_unregister(&edev->nh, nb);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&edev->lock, flags);
+ ret = raw_notifier_chain_unregister(&edev->nh, nb);
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 910e3aa..4863548 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -126,7 +126,7 @@ struct arizona {
struct regmap_irq_chip_data *aod_irq_chip;
struct regmap_irq_chip_data *irq_chip;
- bool hpdet_magic;
+ bool hpdet_clamp;
unsigned int hp_ena;
struct mutex clk_lock;
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 2920261..fb58c7e 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -840,8 +840,8 @@ int arizona_hp_ev(struct snd_soc_dapm_widget *w,
priv->arizona->hp_ena &= ~mask;
priv->arizona->hp_ena |= val;
- /* Force off if HPDET magic is active */
- if (priv->arizona->hpdet_magic)
+ /* Force off if HPDET clamp is active */
+ if (priv->arizona->hpdet_clamp)
val = 0;
regmap_update_bits_async(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1,
OpenPOWER on IntegriCloud