summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-18 08:22:10 -0400
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-18 08:22:10 -0400
commit510965dd4a0a59504ba38455f77339ea8b4c6a70 (patch)
tree36492629ac68de94457482562660154f28e9e039
parent40d7839879b4584f91522d841afb22ed401cf40f (diff)
parent03daa6f82f2b634019fe8261698f6af3c133497f (diff)
downloadop-kernel-dev-510965dd4a0a59504ba38455f77339ea8b4c6a70.zip
op-kernel-dev-510965dd4a0a59504ba38455f77339ea8b4c6a70.tar.gz
Merge tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.1 development cycle: - A new GPIO hogging mechanism has been added. This can be used on boards that want to drive some GPIO line high, low, or set it as input on boot and then never touch it again. For some embedded systems this is bliss and simplifies things to a great extent. - Some API cleanup and closure: gpiod_get_array() and gpiod_put_array() has been added to get and put GPIOs in bulk as was possible with the non-descriptor API. - Encapsulate cross-calls to the pin control subsystem in <linux/gpio/driver.h>. Now this should be the only header any GPIO driver needs to include or something is wrong. Cleanups restricting drivers to this include are welcomed if tested. - Sort the GPIO Kconfig and split it into submenus, as it was becoming and unstructured, illogical and unnavigatable mess. I hope this is easier to follow. Menus that require a certain subsystem like I2C can now be hidden nicely for example, still working on others. - New drivers: - New driver for the Altera Soft GPIO. - The F7188x driver now handles the F71869 and F71869A variants. - The MIPS Loongson driver has been moved to drivers/gpio for consolidation and cleanup. - Cleanups: - The MAX732x is converted to use the GPIOLIB_IRQCHIP infrastructure. - The PCF857x is converted to use the GPIOLIB_IRQCHIP infrastructure. - Radical cleanup of the OMAP driver. - Misc: - Enable the DWAPB GPIO for all architectures. This is a "hard IP" block from Synopsys which has started to turn up in so diverse architectures as X86 Quark, ARC and a slew of ARM systems. So even though it's not an expander, it's generic enough to be available for all. - We add a mock GPIO on Crystalcove PMIC after a long discussion with Daniel Vetter et al, tracing back to the shootout at the kernel summit where DRM drivers and sub-componentization was discussed. In this case a mock GPIO is assumed to be the best compromise gaining some reuse of infrastructure without making DRM drivers overly complex at the same time. Let's see" * tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits) Revert "gpio: sch: use uapi/linux/pci_ids.h directly" gpio: dwapb: remove dependencies gpio: dwapb: enable for ARC gpio: removing kfree remove functionality gpio: mvebu: Fix mask/unmask managment per irq chip type gpio: split GPIO drivers in submenus gpio: move MFD GPIO drivers under their own comment gpio: move BCM Kona Kconfig option gpio: arrange SPI Kconfig symbols alphabetically gpio: arrange PCI GPIO controllers alphabetically gpio: arrange I2C Kconfig symbols alphabetically gpio: arrange Kconfig symbols alphabetically gpio: ich: Implement get_direction function gpio: use (!foo) instead of (foo == NULL) gpio: arizona: drop owner assignment from platform_drivers gpio: max7300: remove 'ret' variable gpio: use devm_kzalloc gpio: sch: use uapi/linux/pci_ids.h directly gpio: x-gene: fix devm_ioremap_resource() check gpio: loongson: Add Loongson-3A/3B GPIO driver support ...
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-altera.txt43
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio.txt30
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.txt2
-rw-r--r--Documentation/gpio/consumer.txt65
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/configs/lemote2f_defconfig1
-rw-r--r--arch/mips/configs/loongson3_defconfig1
-rw-r--r--arch/mips/include/asm/mach-loongson/gpio.h15
-rw-r--r--arch/mips/loongson/common/Makefile1
-rw-r--r--drivers/gpio/Kconfig724
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/gpio/devres.c107
-rw-r--r--drivers/gpio/gpio-adp5588.c8
-rw-r--r--drivers/gpio/gpio-altera.c374
-rw-r--r--drivers/gpio/gpio-arizona.c3
-rw-r--r--drivers/gpio/gpio-crystalcove.c7
-rw-r--r--drivers/gpio/gpio-da9052.c2
-rw-r--r--drivers/gpio/gpio-da9055.c2
-rw-r--r--drivers/gpio/gpio-f7188x.c47
-rw-r--r--drivers/gpio/gpio-ich.c6
-rw-r--r--drivers/gpio/gpio-kempld.c2
-rw-r--r--drivers/gpio/gpio-loongson.c (renamed from arch/mips/loongson/common/gpio.c)120
-rw-r--r--drivers/gpio/gpio-max7300.c4
-rw-r--r--drivers/gpio/gpio-max732x.c134
-rw-r--r--drivers/gpio/gpio-mb86s7x.c5
-rw-r--r--drivers/gpio/gpio-mc33880.c2
-rw-r--r--drivers/gpio/gpio-mcp23s08.c9
-rw-r--r--drivers/gpio/gpio-mvebu.c24
-rw-r--r--drivers/gpio/gpio-omap.c131
-rw-r--r--drivers/gpio/gpio-pcf857x.c134
-rw-r--r--drivers/gpio/gpio-pxa.c3
-rw-r--r--drivers/gpio/gpio-rcar.c63
-rw-r--r--drivers/gpio/gpio-tb10x.c2
-rw-r--r--drivers/gpio/gpio-vf610.c16
-rw-r--r--drivers/gpio/gpio-xgene-sb.c2
-rw-r--r--drivers/gpio/gpiolib-acpi.c86
-rw-r--r--drivers/gpio/gpiolib-of.c111
-rw-r--r--drivers/gpio/gpiolib.c299
-rw-r--r--drivers/gpio/gpiolib.h13
-rw-r--r--drivers/input/keyboard/gpio_keys_polled.c2
-rw-r--r--drivers/leds/leds-gpio.c2
-rw-r--r--include/asm-generic/gpio.h48
-rw-r--r--include/linux/gpio/consumer.h77
-rw-r--r--include/linux/gpio/driver.h48
45 files changed, 1952 insertions, 832 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
new file mode 100644
index 0000000..12f5014
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -0,0 +1,43 @@
+Altera GPIO controller bindings
+
+Required properties:
+- compatible:
+ - "altr,pio-1.0"
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells : Should be 2
+ - The first cell is the gpio offset number.
+ - The second cell is reserved and is currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller
+- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+ - The first cell is the GPIO offset number within the GPIO controller.
+- interrupts: Specify the interrupt.
+- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO
+ hardware is synthesized. This field is required if the Altera GPIO controller
+ used has IRQ enabled as the interrupt type is not software controlled,
+ but hardware synthesized. Required if GPIO is used as an interrupt
+ controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
+ Only the following flags are supported:
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+ IRQ_TYPE_EDGE_BOTH
+ IRQ_TYPE_LEVEL_HIGH
+
+Optional properties:
+- altr,ngpio: Width of the GPIO bank. This defines how many pins the
+ GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
+ specified.
+
+Example:
+
+gpio_altr: gpio@0xff200000 {
+ compatible = "altr,pio-1.0";
+ reg = <0xff200000 0x10>;
+ interrupts = <0 45 4>;
+ altr,ngpio = <32>;
+ altr,interrupt-trigger = <IRQ_TYPE_EDGE_RISING>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index f7a158d..5788d5c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -116,6 +116,29 @@ Every GPIO controller node must contain both an empty "gpio-controller"
property, and a #gpio-cells integer property, which indicates the number of
cells in a gpio-specifier.
+The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
+providing automatic GPIO request and configuration as part of the
+gpio-controller's driver probe function.
+
+Each GPIO hog definition is represented as a child node of the GPIO controller.
+Required properties:
+- gpio-hog: A property specifying that this child node represent a GPIO hog.
+- gpios: Store the GPIO information (id, flags, ...). Shall contain the
+ number of cells specified in its parent node (GPIO controller
+ node).
+Only one of the following properties scanned in the order shown below.
+This means that when multiple properties are present they will be searched
+in the order presented below and the first match is taken as the intended
+configuration.
+- input: A property specifying to set the GPIO direction as input.
+- output-low A property specifying to set the GPIO direction as output with
+ the value low.
+- output-high A property specifying to set the GPIO direction as output with
+ the value high.
+
+Optional properties:
+- line-name: The GPIO label name. If not present the node name is used.
+
Example of two SOC GPIO banks defined as gpio-controller nodes:
qe_pio_a: gpio-controller@1400 {
@@ -123,6 +146,13 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
reg = <0x1400 0x18>;
gpio-controller;
#gpio-cells = <2>;
+
+ line_b {
+ gpio-hog;
+ gpios = <6 0>;
+ output-low;
+ line-name = "foo-bar-gpio";
+ };
};
qe_pio_e: gpio-controller@1460 {
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 67a2e4e..98d1983 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -12,7 +12,7 @@ Required properties:
gpio_mux.
- interrupt-names : Should be the names of irq resources. Each interrupt
uses its own interrupt name, so there should be as many interrupt names
- as referenced interrups.
+ as referenced interrupts.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index d85fbae..c21c131 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -58,7 +58,6 @@ pattern where a GPIO is optional, the gpiod_get_optional() and
gpiod_get_index_optional() functions can be used. These functions return NULL
instead of -ENOENT if no GPIO has been assigned to the requested function:
-
struct gpio_desc *gpiod_get_optional(struct device *dev,
const char *con_id,
enum gpiod_flags flags)
@@ -68,6 +67,27 @@ instead of -ENOENT if no GPIO has been assigned to the requested function:
unsigned int index,
enum gpiod_flags flags)
+For a function using multiple GPIOs all of those can be obtained with one call:
+
+ struct gpio_descs *gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+This function returns a struct gpio_descs which contains an array of
+descriptors:
+
+ struct gpio_descs {
+ unsigned int ndescs;
+ struct gpio_desc *desc[];
+ }
+
+The following function returns NULL instead of -ENOENT if no GPIOs have been
+assigned to the requested function:
+
+ struct gpio_descs *gpiod_get_array_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
Device-managed variants of these functions are also defined:
struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id,
@@ -82,20 +102,37 @@ Device-managed variants of these functions are also defined:
const char *con_id,
enum gpiod_flags flags)
- struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev,
+ struct gpio_desc *devm_gpiod_get_index_optional(struct device *dev,
const char *con_id,
unsigned int index,
enum gpiod_flags flags)
+ struct gpio_descs *devm_gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+ struct gpio_descs *devm_gpiod_get_array_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
A GPIO descriptor can be disposed of using the gpiod_put() function:
void gpiod_put(struct gpio_desc *desc)
-It is strictly forbidden to use a descriptor after calling this function. The
-device-managed variant is, unsurprisingly:
+For an array of GPIOs this function can be used:
+
+ void gpiod_put_array(struct gpio_descs *descs)
+
+It is strictly forbidden to use a descriptor after calling these functions.
+It is also not allowed to individually release descriptors (using gpiod_put())
+from an array acquired with gpiod_get_array().
+
+The device-managed variants are, unsurprisingly:
void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+ void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs)
+
Using GPIOs
===========
@@ -222,6 +259,26 @@ GPIOs belonging to the same bank or chip simultaneously if supported by the
corresponding chip driver. In that case a significantly improved performance
can be expected. If simultaneous setting is not possible the GPIOs will be set
sequentially.
+
+The gpiod_set_array() functions take three arguments:
+ * array_size - the number of array elements
+ * desc_array - an array of GPIO descriptors
+ * value_array - an array of values to assign to the GPIOs
+
+The descriptor array can be obtained using the gpiod_get_array() function
+or one of its variants. If the group of descriptors returned by that function
+matches the desired group of GPIOs, those GPIOs can be set by simply using
+the struct gpio_descs returned by gpiod_get_array():
+
+ struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
+ gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
+ my_gpio_values);
+
+It is also possible to set a completely arbitrary array of descriptors. The
+descriptors may be obtained using any combination of gpiod_get() and
+gpiod_get_array(). Afterwards the array of descriptors has to be setup
+manually before it can be used with gpiod_set_array().
+
Note that for optimal performance GPIOs belonging to the same chip should be
contiguous within the array of descriptors.
diff --git a/MAINTAINERS b/MAINTAINERS
index f7bbaec..f71079b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -569,6 +569,12 @@ L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
S: Maintained
F: drivers/mailbox/mailbox-altera.c
+ALTERA PIO DRIVER
+M: Tien Hock Loh <thloh@altera.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-altera.c
+
ALTERA TRIPLE SPEED ETHERNET DRIVER
M: Vince Bridgers <vbridger@opensource.altera.com>
L: netdev@vger.kernel.org
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2198837..f501665 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1288,6 +1288,7 @@ config CPU_LOONGSON3
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
+ select ARCH_REQUIRE_GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index e51aad9..0cbc986 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -171,6 +171,7 @@ CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_HW_RANDOM=y
CONFIG_RTC=y
+CONFIG_GPIO_LOONGSON=y
CONFIG_THERMAL=y
CONFIG_MEDIA_SUPPORT=m
CONFIG_VIDEO_DEV=m
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 7eabcd2..c844299 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -243,6 +243,7 @@ CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
+CONFIG_GPIO_LOONGSON=y
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_W83627HF=m
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h
index 211a7b7..b3b2169 100644
--- a/arch/mips/include/asm/mach-loongson/gpio.h
+++ b/arch/mips/include/asm/mach-loongson/gpio.h
@@ -1,8 +1,9 @@
/*
- * STLS2F GPIO Support
+ * Loongson GPIO Support
*
* Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
* Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -10,14 +11,14 @@
* (at your option) any later version.
*/
-#ifndef __STLS2F_GPIO_H
-#define __STLS2F_GPIO_H
+#ifndef __LOONGSON_GPIO_H
+#define __LOONGSON_GPIO_H
#include <asm-generic/gpio.h>
-extern void gpio_set_value(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern int gpio_cansleep(unsigned gpio);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
/* The chip can do interrupt
* but it has not been tested and doc not clear
@@ -32,4 +33,4 @@ static inline int irq_to_gpio(int gpio)
return -EINVAL;
}
-#endif /* __STLS2F_GPIO_H */
+#endif /* __LOONGSON_GPIO_H */
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index d87e033..e70c33f 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -4,7 +4,6 @@
obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
bonito-irq.o mem.o machtype.o platform.o
-obj-$(CONFIG_GPIOLIB) += gpio.o
obj-$(CONFIG_PCI) += pci.o
#
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index dc1aaa8..38d875d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -90,27 +90,11 @@ config GPIO_GENERIC
# put drivers in the right section, in alphabetical order
-config GPIO_DA9052
- tristate "Dialog DA9052 GPIO"
- depends on PMIC_DA9052
- help
- Say yes here to enable the GPIO driver for the DA9052 chip.
-
-config GPIO_DA9055
- tristate "Dialog Semiconductor DA9055 GPIO"
- depends on MFD_DA9055
- help
- Say yes here to enable the GPIO driver for the DA9055 chip.
-
- The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
- be controller by this driver.
-
- If driver is built as a module it will be called gpio-da9055.
-
+# This symbol is selected by both I2C and SPI expanders
config GPIO_MAX730X
tristate
-comment "Memory mapped GPIO drivers:"
+menu "Memory mapped GPIO drivers"
config GPIO_74XX_MMIO
tristate "GPIO driver for 74xx-ICs with MMIO access"
@@ -126,6 +110,22 @@ config GPIO_74XX_MMIO
8 bits: 74244 (Input), 74273 (Output)
16 bits: 741624 (Input), 7416374 (Output)
+config GPIO_ALTERA
+ tristate "Altera GPIO"
+ depends on OF_GPIO
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y or M here to build support for the Altera PIO device.
+
+ If driver is built as a module it will be called gpio-altera.
+
+config GPIO_BCM_KONA
+ bool "Broadcom Kona GPIO"
+ depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
config GPIO_CLPS711X
tristate "CLPS711X GPIO support"
depends on ARCH_CLPS711X || COMPILE_TEST
@@ -140,28 +140,14 @@ config GPIO_DAVINCI
help
Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
-config GPIO_GENERIC_PLATFORM
- tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
- select GPIO_GENERIC
- help
- Say yes here to support basic platform_device memory-mapped GPIO controllers.
-
config GPIO_DWAPB
tristate "Synopsys DesignWare APB GPIO driver"
- depends on ARM
- depends on OF_GPIO
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
help
Say Y or M here to build support for the Synopsys DesignWare APB
GPIO block.
-config GPIO_IT8761E
- tristate "IT8761E GPIO support"
- depends on X86 # unconditional access to IO space.
- help
- Say yes here to support GPIO functionality of IT8761E super I/O chip.
-
config GPIO_EM
tristate "Emma Mobile GPIO"
depends on ARM && OF_GPIO
@@ -173,36 +159,99 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
-config GPIO_ZEVIO
- bool "LSI ZEVIO SoC memory mapped GPIOs"
- depends on ARM && OF_GPIO
- help
- Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
-
-config GPIO_MM_LANTIQ
- bool "Lantiq Memory mapped GPIOs"
- depends on LANTIQ && SOC_XWAY
- help
- This enables support for memory mapped GPIOs on the External Bus Unit
- (EBU) found on Lantiq SoCs. The gpios are output only as they are
- created by attaching a 16bit latch to the bus.
-
config GPIO_F7188X
- tristate "F71882FG and F71889F GPIO support"
+ tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
depends on X86
help
This option enables support for GPIOs found on Fintek Super-I/O
- chips F71882FG and F71889F.
+ chips F71869, F71869A, F71882FG and F71889F.
To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
+config GPIO_GE_FPGA
+ bool "GE FPGA based GPIO"
+ depends on GE_FPGA
+ select GPIO_GENERIC
+ help
+ Support for common GPIO functionality provided on some GE Single Board
+ Computers.
+
+ This driver provides basic support (configure as input or output, read
+ and write pin state) for GPIO implemented in a number of GE single
+ board computers.
+
+config GPIO_GENERIC_PLATFORM
+ tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+ select GPIO_GENERIC
+ help
+ Say yes here to support basic platform_device memory-mapped GPIO controllers.
+
+config GPIO_GRGPIO
+ tristate "Aeroflex Gaisler GRGPIO support"
+ depends on OF
+ select GPIO_GENERIC
+ select IRQ_DOMAIN
+ help
+ Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+ VHDL IP core library.
+
+config GPIO_ICH
+ tristate "Intel ICH GPIO"
+ depends on PCI && X86
+ select MFD_CORE
+ select LPC_ICH
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
+ ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
+ Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
+
+ If unsure, say N.
+
+config GPIO_IOP
+ tristate "Intel IOP GPIO"
+ depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ IOP32X or IOP33X.
+
+ If unsure, say N.
+
+config GPIO_IT8761E
+ tristate "IT8761E GPIO support"
+ depends on X86 # unconditional access to IO space.
+ help
+ Say yes here to support GPIO functionality of IT8761E super I/O chip.
+
+config GPIO_LOONGSON
+ bool "Loongson-2/3 GPIO support"
+ depends on CPU_LOONGSON2 || CPU_LOONGSON3
+ help
+ driver for GPIO functionality on Loongson-2F/3A/3B processors.
+
+config GPIO_LYNXPOINT
+ tristate "Intel Lynxpoint GPIO support"
+ depends on ACPI && X86
+ select GPIOLIB_IRQCHIP
+ help
+ driver for GPIO functionality on Intel Lynxpoint PCH chipset
+ Requires ACPI device enumeration code to set up a platform device.
+
config GPIO_MB86S7X
bool "GPIO support for Fujitsu MB86S7x Platforms"
depends on ARCH_MB86S7X
help
Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+ help
+ This enables support for memory mapped GPIOs on the External Bus Unit
+ (EBU) found on Lantiq SoCs. The gpios are output only as they are
+ created by attaching a 16bit latch to the bus.
+
config GPIO_MOXART
bool "MOXART GPIO support"
depends on ARCH_MOXART
@@ -303,6 +352,33 @@ config GPIO_SAMSUNG
Legacy GPIO support. Use only for platforms without support for
pinctrl.
+config GPIO_SCH
+ tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
+ depends on PCI && X86
+ select MFD_CORE
+ select LPC_SCH
+ help
+ Say yes here to support GPIO interface on Intel Poulsbo SCH,
+ Intel Tunnel Creek processor, Intel Centerton processor or
+ Intel Quark X1000 SoC.
+
+ The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
+ powered by the core power rail and are turned off during sleep
+ modes (S3 and higher). The remaining four GPIOs are powered by
+ the Intel SCH suspend power supply. These GPIOs remain
+ active during S3. The suspend powered GPIOs can be used to wake the
+ system from the Suspend-to-RAM state.
+
+ The Intel Tunnel Creek processor has 5 GPIOs powered by the
+ core power rail and 9 from suspend power supply.
+
+ The Intel Centerton processor has a total of 30 GPIO pins.
+ Twenty-one are powered by the core power rail and 9 from the
+ suspend power supply.
+
+ The Intel Quark X1000 SoC has 2 GPIOs powered by the core
+ power well and 6 from the suspend power well.
+
config GPIO_SCH311X
tristate "SMSC SCH311x SuperI/O GPIO"
help
@@ -327,12 +403,27 @@ config GPIO_STA2X11
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
+config GPIO_STP_XWAY
+ bool "XWAY STP GPIOs"
+ depends on SOC_XWAY
+ help
+ This enables support for the Serial To Parallel (STP) unit found on
+ XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+ that can be up to 24 bit. This peripheral is aimed at driving leds.
+ Some of the gpios/leds can be auto updated by the soc with dsl and
+ phy status.
+
config GPIO_SYSCON
tristate "GPIO based on SYSCON"
depends on MFD_SYSCON && OF
help
Say yes here to support GPIO functionality though SYSCON driver.
+config GPIO_TB10X
+ bool
+ select GENERIC_IRQ_CHIP
+ select OF_GPIO
+
config GPIO_TS5500
tristate "TS-5500 DIO blocks and compatibles"
depends on TS5500 || COMPILE_TEST
@@ -364,6 +455,24 @@ config GPIO_VF610
help
Say yes here to support Vybrid vf610 GPIOs.
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Uint support"
+ depends on CPU_VR41XX
+ help
+ Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
+config GPIO_VX855
+ tristate "VIA VX855/VX875 GPIO"
+ depends on PCI
+ select MFD_CORE
+ select MFD_VX855
+ help
+ Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config GPIO_XGENE
bool "APM X-Gene GPIO controller support"
depends on ARM64 && OF_GPIO
@@ -387,13 +496,6 @@ config GPIO_XILINX
help
Say yes here to support the Xilinx FPGA GPIO device
-config GPIO_ZYNQ
- tristate "Xilinx Zynq GPIO support"
- depends on ARCH_ZYNQ
- select GPIOLIB_IRQCHIP
- help
- Say yes here to support Xilinx Zynq GPIO controller.
-
config GPIO_XTENSA
bool "Xtensa GPIO32 support"
depends on XTENSA
@@ -403,135 +505,49 @@ config GPIO_XTENSA
Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
and EXPSTATE (output) ports
-config GPIO_VR41XX
- tristate "NEC VR4100 series General-purpose I/O Uint support"
- depends on CPU_VR41XX
- help
- Say yes here to support the NEC VR4100 series General-purpose I/O Uint
-
-config GPIO_SCH
- tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
- depends on PCI && X86
- select MFD_CORE
- select LPC_SCH
- help
- Say yes here to support GPIO interface on Intel Poulsbo SCH,
- Intel Tunnel Creek processor, Intel Centerton processor or
- Intel Quark X1000 SoC.
-
- The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
- powered by the core power rail and are turned off during sleep
- modes (S3 and higher). The remaining four GPIOs are powered by
- the Intel SCH suspend power supply. These GPIOs remain
- active during S3. The suspend powered GPIOs can be used to wake the
- system from the Suspend-to-RAM state.
-
- The Intel Tunnel Creek processor has 5 GPIOs powered by the
- core power rail and 9 from suspend power supply.
-
- The Intel Centerton processor has a total of 30 GPIO pins.
- Twenty-one are powered by the core power rail and 9 from the
- suspend power supply.
-
- The Intel Quark X1000 SoC has 2 GPIOs powered by the core
- power well and 6 from the suspend power well.
-
-config GPIO_ICH
- tristate "Intel ICH GPIO"
- depends on PCI && X86
- select MFD_CORE
- select LPC_ICH
- help
- Say yes here to support the GPIO functionality of a number of Intel
- ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
- ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
- Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
-
- If unsure, say N.
-
-config GPIO_IOP
- tristate "Intel IOP GPIO"
- depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
- help
- Say yes here to support the GPIO functionality of a number of Intel
- IOP32X or IOP33X.
-
- If unsure, say N.
-
-config GPIO_VX855
- tristate "VIA VX855/VX875 GPIO"
- depends on PCI
- select MFD_CORE
- select MFD_VX855
- help
- Support access to the VX855/VX875 GPIO lines through the gpio library.
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config GPIO_GE_FPGA
- bool "GE FPGA based GPIO"
- depends on GE_FPGA
- select GPIO_GENERIC
+config GPIO_ZEVIO
+ bool "LSI ZEVIO SoC memory mapped GPIOs"
+ depends on ARM && OF_GPIO
help
- Support for common GPIO functionality provided on some GE Single Board
- Computers.
-
- This driver provides basic support (configure as input or output, read
- and write pin state) for GPIO implemented in a number of GE single
- board computers.
+ Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
-config GPIO_LYNXPOINT
- tristate "Intel Lynxpoint GPIO support"
- depends on ACPI && X86
+config GPIO_ZYNQ
+ tristate "Xilinx Zynq GPIO support"
+ depends on ARCH_ZYNQ
select GPIOLIB_IRQCHIP
help
- driver for GPIO functionality on Intel Lynxpoint PCH chipset
- Requires ACPI device enumeration code to set up a platform device.
-
-config GPIO_GRGPIO
- tristate "Aeroflex Gaisler GRGPIO support"
- depends on OF
- select GPIO_GENERIC
- select IRQ_DOMAIN
- help
- Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
- VHDL IP core library.
+ Say yes here to support Xilinx Zynq GPIO controller.
-config GPIO_TB10X
- bool
- select GENERIC_IRQ_CHIP
- select OF_GPIO
+endmenu
-comment "I2C GPIO expanders:"
+menu "I2C GPIO expanders"
+ depends on I2C
-config GPIO_ARIZONA
- tristate "Wolfson Microelectronics Arizona class devices"
- depends on MFD_ARIZONA
+config GPIO_ADP5588
+ tristate "ADP5588 I2C GPIO expander"
+ depends on I2C
help
- Support for GPIOs on Wolfson Arizona class devices.
+ This option enables support for 18 GPIOs found
+ on Analog Devices ADP5588 GPIO Expanders.
-config GPIO_CRYSTAL_COVE
- tristate "GPIO support for Crystal Cove PMIC"
- depends on INTEL_SOC_PMIC
- select GPIOLIB_IRQCHIP
+config GPIO_ADP5588_IRQ
+ bool "Interrupt controller support for ADP5588"
+ depends on GPIO_ADP5588=y
help
- Support for GPIO pins on Crystal Cove PMIC.
-
- Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
- inside.
-
- This driver can also be built as a module. If so, the module will be
- called gpio-crystalcove.
+ Say yes here to enable the adp5588 to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
-config GPIO_LP3943
- tristate "TI/National Semiconductor LP3943 GPIO expander"
- depends on MFD_LP3943
+config GPIO_ADNP
+ tristate "Avionic Design N-bit GPIO expander"
+ depends on I2C && OF_GPIO
+ select GPIOLIB_IRQCHIP
help
- GPIO driver for LP3943 MFD.
- LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
- Open drain outputs are required for this usage.
+ This option enables support for N GPIOs found on Avionic Design
+ I2C GPIO expanders. The register space will be extended by powers
+ of two, so the controller will need to accommodate for that. For
+ example: if a controller provides 48 pins, 6 registers will be
+ enough to represent all pins, but the driver will assume a
+ register layout for 64 pins (8 registers).
config GPIO_MAX7300
tristate "Maxim MAX7300 GPIO expander"
@@ -543,7 +559,6 @@ config GPIO_MAX7300
config GPIO_MAX732X
tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
depends on I2C
- select IRQ_DOMAIN
help
Say yes here to support the MAX7319, MAX7320-7327 series of I2C
Port Expanders. Each IO port on these chips has a fixed role of
@@ -563,6 +578,7 @@ config GPIO_MAX732X
config GPIO_MAX732X_IRQ
bool "Interrupt controller support for MAX732x"
depends on GPIO_MAX732X=y
+ select GPIOLIB_IRQCHIP
help
Say yes here to enable the max732x to be used as an interrupt
controller. It requires the driver to be built in the kernel.
@@ -604,6 +620,7 @@ config GPIO_PCA953X_IRQ
config GPIO_PCF857X
tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
depends on I2C
+ select GPIOLIB_IRQCHIP
select IRQ_DOMAIN
help
Say yes here to provide access to most "quasi-bidirectional" I2C
@@ -626,15 +643,6 @@ config GPIO_PCF857X
This driver provides an in-kernel interface to those GPIOs using
platform-neutral GPIO calls.
-config GPIO_RC5T583
- bool "RICOH RC5T583 GPIO"
- depends on MFD_RC5T583
- help
- Select this option to enable GPIO driver for the Ricoh RC5T583
- chip family.
- This driver provides the support for driving/reading the gpio pins
- of RC5T583 device through standard gpio library.
-
config GPIO_SX150X
bool "Semtech SX150x I2C GPIO expander"
depends on I2C=y
@@ -647,6 +655,124 @@ config GPIO_SX150X
8 bits: sx1508q
16 bits: sx1509q
+endmenu
+
+menu "MFD GPIO expanders"
+
+config GPIO_ADP5520
+ tristate "GPIO Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip GPIO found
+ on Analog Devices ADP5520 PMICs.
+
+config GPIO_ARIZONA
+ tristate "Wolfson Microelectronics Arizona class devices"
+ depends on MFD_ARIZONA
+ help
+ Support for GPIOs on Wolfson Arizona class devices.
+
+config GPIO_CRYSTAL_COVE
+ tristate "GPIO support for Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ select GPIOLIB_IRQCHIP
+ help
+ Support for GPIO pins on Crystal Cove PMIC.
+
+ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+ inside.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-crystalcove.
+
+config GPIO_CS5535
+ tristate "AMD CS5535/CS5536 GPIO support"
+ depends on MFD_CS5535
+ help
+ The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+ can be used for quite a number of things. The CS5535/6 is found on
+ AMD Geode and Lemote Yeeloong devices.
+
+ If unsure, say N.
+
+config GPIO_DA9052
+ tristate "Dialog DA9052 GPIO"
+ depends on PMIC_DA9052
+ help
+ Say yes here to enable the GPIO driver for the DA9052 chip.
+
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
+config GPIO_JANZ_TTL
+ tristate "Janz VMOD-TTL Digital IO Module"
+ depends on MFD_JANZ_CMODIO
+ help
+ This enables support for the Janz VMOD-TTL Digital IO module.
+ This driver provides support for driving the pins in output
+ mode only. Input mode is not supported.
+
+config GPIO_KEMPLD
+ tristate "Kontron ETX / COMexpress GPIO"
+ depends on MFD_KEMPLD
+ help
+ This enables support for the PLD GPIO interface on some Kontron ETX
+ and COMexpress (ETXexpress) modules.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-kempld.
+
+config GPIO_LP3943
+ tristate "TI/National Semiconductor LP3943 GPIO expander"
+ depends on MFD_LP3943
+ help
+ GPIO driver for LP3943 MFD.
+ LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+ Open drain outputs are required for this usage.
+
+config GPIO_MSIC
+ bool "Intel MSIC mixed signal gpio support"
+ depends on MFD_INTEL_MSIC
+ help
+ Enable support for GPIO on intel MSIC controllers found in
+ intel MID devices
+
+config GPIO_PALMAS
+ bool "TI PALMAS series PMICs GPIO"
+ depends on MFD_PALMAS
+ help
+ Select this option to enable GPIO driver for the TI PALMAS
+ series chip family.
+
+config GPIO_RC5T583
+ bool "RICOH RC5T583 GPIO"
+ depends on MFD_RC5T583
+ help
+ Select this option to enable GPIO driver for the Ricoh RC5T583
+ chip family.
+ This driver provides the support for driving/reading the gpio pins
+ of RC5T583 device through standard gpio library.
+
config GPIO_STMPE
bool "STMPE GPIOs"
depends on MFD_STMPE
@@ -656,16 +782,6 @@ config GPIO_STMPE
This enables support for the GPIOs found on the STMPE I/O
Expanders.
-config GPIO_STP_XWAY
- bool "XWAY STP GPIOs"
- depends on SOC_XWAY
- help
- This enables support for the Serial To Parallel (STP) unit found on
- XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
- that can be up to 24 bit. This peripheral is aimed at driving leds.
- Some of the gpios/leds can be auto updated by the soc with dsl and
- phy status.
-
config GPIO_TC3589X
bool "TC3589X GPIOs"
depends on MFD_TC3589X
@@ -675,6 +791,26 @@ config GPIO_TC3589X
This enables support for the GPIOs found on the TC3589X
I/O Expander.
+config GPIO_TIMBERDALE
+ bool "Support for timberdale GPIO IP"
+ depends on MFD_TIMBERDALE
+ ---help---
+ Add support for the GPIO IP in the timberdale FPGA.
+
+config GPIO_TPS6586X
+ bool "TPS6586X GPIO"
+ depends on MFD_TPS6586X
+ help
+ Select this option to enable GPIO driver for the TPS6586X
+ chip family.
+
+config GPIO_TPS65910
+ bool "TPS65910 GPIO"
+ depends on MFD_TPS65910
+ help
+ Select this option to enable GPIO driver for the TPS65910
+ chip family.
+
config GPIO_TPS65912
tristate "TI TPS65912 GPIO"
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
@@ -695,6 +831,13 @@ config GPIO_TWL6040
Say yes here to access the GPO signals of twl6040
audio chip from Texas Instruments.
+config GPIO_UCB1400
+ tristate "Philips UCB1400 GPIO"
+ depends on UCB1400_CORE
+ help
+ This enables support for the Philips UCB1400 GPIO pins.
+ The UCB1400 is an AC97 audio codec.
+
config GPIO_WM831X
tristate "WM831x GPIOs"
depends on MFD_WM831X
@@ -716,50 +859,22 @@ config GPIO_WM8994
Say yes here to access the GPIO signals of WM8994 audio hub
CODECs from Wolfson Microelectronics.
-config GPIO_ADP5520
- tristate "GPIO Support for ADP5520 PMIC"
- depends on PMIC_ADP5520
- help
- This option enables support for on-chip GPIO found
- on Analog Devices ADP5520 PMICs.
+endmenu
-config GPIO_ADP5588
- tristate "ADP5588 I2C GPIO expander"
- depends on I2C
- help
- This option enables support for 18 GPIOs found
- on Analog Devices ADP5588 GPIO Expanders.
-
-config GPIO_ADP5588_IRQ
- bool "Interrupt controller support for ADP5588"
- depends on GPIO_ADP5588=y
- help
- Say yes here to enable the adp5588 to be used as an interrupt
- controller. It requires the driver to be built in the kernel.
+menu "PCI GPIO expanders"
+ depends on PCI
-config GPIO_ADNP
- tristate "Avionic Design N-bit GPIO expander"
- depends on I2C && OF_GPIO
- select GPIOLIB_IRQCHIP
+config GPIO_AMD8111
+ tristate "AMD 8111 GPIO driver"
+ depends on PCI
help
- This option enables support for N GPIOs found on Avionic Design
- I2C GPIO expanders. The register space will be extended by powers
- of two, so the controller will need to accommodate for that. For
- example: if a controller provides 48 pins, 6 registers will be
- enough to represent all pins, but the driver will assume a
- register layout for 64 pins (8 registers).
-
-comment "PCI GPIO expanders:"
+ The AMD 8111 south bridge contains 32 GPIO pins which can be used.
-config GPIO_CS5535
- tristate "AMD CS5535/CS5536 GPIO support"
- depends on MFD_CS5535
- help
- The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
- can be used for quite a number of things. The CS5535/6 is found on
- AMD Geode and Lemote Yeeloong devices.
+ Note, that usually system firmware/ACPI handles GPIO pins on their
+ own and users might easily break their systems with uncarefull usage
+ of this driver!
- If unsure, say N.
+ If unsure, say N
config GPIO_BT8XX
tristate "BT8XX GPIO abuser"
@@ -777,18 +892,6 @@ config GPIO_BT8XX
If unsure, say N.
-config GPIO_AMD8111
- tristate "AMD 8111 GPIO driver"
- depends on PCI
- help
- The AMD 8111 south bridge contains 32 GPIO pins which can be used.
-
- Note, that usually system firmware/ACPI handles GPIO pins on their
- own and users might easily break their systems with uncarefull usage
- of this driver!
-
- If unsure, say N
-
config GPIO_INTEL_MID
bool "Intel Mid GPIO support"
depends on PCI && X86
@@ -796,6 +899,16 @@ config GPIO_INTEL_MID
help
Say Y here to support Intel Mid GPIO.
+config GPIO_ML_IOH
+ tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+ depends on PCI
+ select GENERIC_IRQ_CHIP
+ help
+ ML7213 is companion chip for Intel Atom E6xx series.
+ This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
+ Hub) which is for IVI(In-Vehicle Infotainment) use.
+ This driver can access the IOH's GPIO device.
+
config GPIO_PCH
tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
depends on PCI && (X86_32 || COMPILE_TEST)
@@ -812,15 +925,14 @@ config GPIO_PCH
ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7223/ML7831 is completely compatible for Intel EG20T PCH.
-config GPIO_ML_IOH
- tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+config GPIO_RDC321X
+ tristate "RDC R-321x GPIO support"
depends on PCI
- select GENERIC_IRQ_CHIP
+ select MFD_CORE
+ select MFD_RDC321X
help
- ML7213 is companion chip for Intel Atom E6xx series.
- This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
- Hub) which is for IVI(In-Vehicle Infotainment) use.
- This driver can access the IOH's GPIO device.
+ Support for the RDC R321x SoC GPIOs over southbridge
+ PCI configuration space.
config GPIO_SODAVILLE
bool "Intel Sodaville GPIO support"
@@ -830,22 +942,18 @@ config GPIO_SODAVILLE
help
Say Y here to support Intel Sodaville GPIO.
-config GPIO_TIMBERDALE
- bool "Support for timberdale GPIO IP"
- depends on MFD_TIMBERDALE
- ---help---
- Add support for the GPIO IP in the timberdale FPGA.
+endmenu
-config GPIO_RDC321X
- tristate "RDC R-321x GPIO support"
- depends on PCI
- select MFD_CORE
- select MFD_RDC321X
- help
- Support for the RDC R321x SoC GPIOs over southbridge
- PCI configuration space.
+menu "SPI GPIO expanders"
+ depends on SPI_MASTER
-comment "SPI GPIO expanders:"
+config GPIO_74X164
+ tristate "74x164 serial-in/parallel-out 8-bits shift register"
+ depends on SPI_MASTER && OF
+ help
+ Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+ shift registers. This driver can be used to provide access
+ to more gpio outputs.
config GPIO_MAX7301
tristate "Maxim MAX7301 GPIO expander"
@@ -870,80 +978,10 @@ config GPIO_MC33880
SPI driver for Freescale MC33880 high-side/low-side switch.
This provides GPIO interface supporting inputs and outputs.
-config GPIO_74X164
- tristate "74x164 serial-in/parallel-out 8-bits shift register"
- depends on SPI_MASTER && OF
- help
- Driver for 74x164 compatible serial-in/parallel-out 8-outputs
- shift registers. This driver can be used to provide access
- to more gpio outputs.
-
-comment "AC97 GPIO expanders:"
-
-config GPIO_UCB1400
- tristate "Philips UCB1400 GPIO"
- depends on UCB1400_CORE
- help
- This enables support for the Philips UCB1400 GPIO pins.
- The UCB1400 is an AC97 audio codec.
-
-comment "LPC GPIO expanders:"
-
-config GPIO_KEMPLD
- tristate "Kontron ETX / COMexpress GPIO"
- depends on MFD_KEMPLD
- help
- This enables support for the PLD GPIO interface on some Kontron ETX
- and COMexpress (ETXexpress) modules.
-
- This driver can also be built as a module. If so, the module will be
- called gpio-kempld.
-
-comment "MODULbus GPIO expanders:"
-
-config GPIO_JANZ_TTL
- tristate "Janz VMOD-TTL Digital IO Module"
- depends on MFD_JANZ_CMODIO
- help
- This enables support for the Janz VMOD-TTL Digital IO module.
- This driver provides support for driving the pins in output
- mode only. Input mode is not supported.
-
-config GPIO_PALMAS
- bool "TI PALMAS series PMICs GPIO"
- depends on MFD_PALMAS
- help
- Select this option to enable GPIO driver for the TI PALMAS
- series chip family.
-
-config GPIO_TPS6586X
- bool "TPS6586X GPIO"
- depends on MFD_TPS6586X
- help
- Select this option to enable GPIO driver for the TPS6586X
- chip family.
+endmenu
-config GPIO_TPS65910
- bool "TPS65910 GPIO"
- depends on MFD_TPS65910
- help
- Select this option to enable GPIO driver for the TPS65910
- chip family.
-
-config GPIO_MSIC
- bool "Intel MSIC mixed signal gpio support"
- depends on MFD_INTEL_MSIC
- help
- Enable support for GPIO on intel MSIC controllers found in
- intel MID devices
-
-config GPIO_BCM_KONA
- bool "Broadcom Kona GPIO"
- depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
- help
- Turn on GPIO support for Broadcom "Kona" chips.
-
-comment "USB GPIO expanders:"
+menu "USB GPIO expanders"
+ depends on USB
config GPIO_VIPERBOARD
tristate "Viperboard GPIO a & b support"
@@ -956,16 +994,6 @@ config GPIO_VIPERBOARD
River Tech's viperboard.h for detailed meaning
of the module parameters.
-config GPIO_DLN2
- tristate "Diolan DLN2 GPIO support"
- depends on MFD_DLN2
- select GPIOLIB_IRQCHIP
-
- help
- Select this option to enable GPIO driver for the Diolan DLN2
- board.
-
- This driver can also be built as a module. If so, the module
- will be called gpio-dln2.
+endmenu
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index bdda6a9..07b816b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
+obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 13dbd3d..07ba823 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -35,6 +35,20 @@ static int devm_gpiod_match(struct device *dev, void *res, void *data)
return *this == *gpio;
}
+static void devm_gpiod_release_array(struct device *dev, void *res)
+{
+ struct gpio_descs **descs = res;
+
+ gpiod_put_array(*descs);
+}
+
+static int devm_gpiod_match_array(struct device *dev, void *res, void *data)
+{
+ struct gpio_descs **this = res, **gpios = data;
+
+ return *this == *gpios;
+}
+
/**
* devm_gpiod_get - Resource-managed gpiod_get()
* @dev: GPIO consumer
@@ -111,23 +125,39 @@ EXPORT_SYMBOL(__devm_gpiod_get_index);
/**
* devm_get_gpiod_from_child - get a GPIO descriptor from a device's child node
* @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
* @child: firmware node (child of @dev)
*
* GPIO descriptors returned from this function are automatically disposed on
* driver detach.
*/
struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
+ const char *con_id,
struct fwnode_handle *child)
{
+ static const char * const suffixes[] = { "gpios", "gpio" };
+ char prop_name[32]; /* 32 is max size of property name */
struct gpio_desc **dr;
struct gpio_desc *desc;
+ unsigned int i;
dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
GFP_KERNEL);
if (!dr)
return ERR_PTR(-ENOMEM);
- desc = fwnode_get_named_gpiod(child, "gpios");
+ for (i = 0; i < ARRAY_SIZE(suffixes); i++) {
+ if (con_id)
+ snprintf(prop_name, sizeof(prop_name), "%s-%s",
+ con_id, suffixes[i]);
+ else
+ snprintf(prop_name, sizeof(prop_name), "%s",
+ suffixes[i]);
+
+ desc = fwnode_get_named_gpiod(child, prop_name);
+ if (!IS_ERR(desc) || (PTR_ERR(desc) == -EPROBE_DEFER))
+ break;
+ }
if (IS_ERR(desc)) {
devres_free(dr);
return desc;
@@ -170,6 +200,66 @@ struct gpio_desc *__must_check __devm_gpiod_get_index_optional(struct device *de
EXPORT_SYMBOL(__devm_gpiod_get_index_optional);
/**
+ * devm_gpiod_get_array - Resource-managed gpiod_get_array()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * Managed gpiod_get_array(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get_array() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_descs *__must_check devm_gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+{
+ struct gpio_descs **dr;
+ struct gpio_descs *descs;
+
+ dr = devres_alloc(devm_gpiod_release_array,
+ sizeof(struct gpio_descs *), GFP_KERNEL);
+ if (!dr)
+ return ERR_PTR(-ENOMEM);
+
+ descs = gpiod_get_array(dev, con_id, flags);
+ if (IS_ERR(descs)) {
+ devres_free(dr);
+ return descs;
+ }
+
+ *dr = descs;
+ devres_add(dev, dr);
+
+ return descs;
+}
+EXPORT_SYMBOL(devm_gpiod_get_array);
+
+/**
+ * devm_gpiod_get_array_optional - Resource-managed gpiod_get_array_optional()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * Managed gpiod_get_array_optional(). GPIO descriptors returned from this
+ * function are automatically disposed on driver detach.
+ * See gpiod_get_array_optional() for detailed information about behavior and
+ * return values.
+ */
+struct gpio_descs *__must_check
+devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
+ enum gpiod_flags flags)
+{
+ struct gpio_descs *descs;
+
+ descs = devm_gpiod_get_array(dev, con_id, flags);
+ if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
+ return NULL;
+
+ return descs;
+}
+EXPORT_SYMBOL(devm_gpiod_get_array_optional);
+
+/**
* devm_gpiod_put - Resource-managed gpiod_put()
* @desc: GPIO descriptor to dispose of
*
@@ -184,6 +274,21 @@ void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
}
EXPORT_SYMBOL(devm_gpiod_put);
+/**
+ * devm_gpiod_put_array - Resource-managed gpiod_put_array()
+ * @descs: GPIO descriptor array to dispose of
+ *
+ * Dispose of an array of GPIO descriptors obtained with devm_gpiod_get_array().
+ * Normally this function will not be called as the GPIOs will be disposed of
+ * by the resource management code.
+ */
+void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs)
+{
+ WARN_ON(devres_release(dev, devm_gpiod_release_array,
+ devm_gpiod_match_array, &descs));
+}
+EXPORT_SYMBOL(devm_gpiod_put_array);
+
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index 3beed6e..d3fe6a6 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -367,7 +367,7 @@ static int adp5588_gpio_probe(struct i2c_client *client,
struct gpio_chip *gc;
int ret, i, revid;
- if (pdata == NULL) {
+ if (!pdata) {
dev_err(&client->dev, "missing platform data\n");
return -ENODEV;
}
@@ -378,8 +378,8 @@ static int adp5588_gpio_probe(struct i2c_client *client,
return -EIO;
}
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL)
+ dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
return -ENOMEM;
dev->client = client;
@@ -446,7 +446,6 @@ static int adp5588_gpio_probe(struct i2c_client *client,
err_irq:
adp5588_irq_teardown(dev);
err:
- kfree(dev);
return ret;
}
@@ -472,7 +471,6 @@ static int adp5588_gpio_remove(struct i2c_client *client)
gpiochip_remove(&dev->gpio_chip);
- kfree(dev);
return 0;
}
diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
new file mode 100644
index 0000000..449fb46
--- /dev/null
+++ b/drivers/gpio/gpio-altera.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Based on gpio-mpc8xxx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+
+#define ALTERA_GPIO_MAX_NGPIO 32
+#define ALTERA_GPIO_DATA 0x0
+#define ALTERA_GPIO_DIR 0x4
+#define ALTERA_GPIO_IRQ_MASK 0x8
+#define ALTERA_GPIO_EDGE_CAP 0xc
+
+/**
+* struct altera_gpio_chip
+* @mmchip : memory mapped chip structure.
+* @gpio_lock : synchronization lock so that new irq/set/get requests
+ will be blocked until the current one completes.
+* @interrupt_trigger : specifies the hardware configured IRQ trigger type
+ (rising, falling, both, high)
+* @mapped_irq : kernel mapped irq number.
+*/
+struct altera_gpio_chip {
+ struct of_mm_gpio_chip mmchip;
+ spinlock_t gpio_lock;
+ int interrupt_trigger;
+ int mapped_irq;
+};
+
+static void altera_gpio_irq_unmask(struct irq_data *d)
+{
+ struct altera_gpio_chip *altera_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ unsigned long flags;
+ u32 intmask;
+
+ altera_gc = irq_data_get_irq_chip_data(d);
+ mm_gc = &altera_gc->mmchip;
+
+ spin_lock_irqsave(&altera_gc->gpio_lock, flags);
+ intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+ /* Set ALTERA_GPIO_IRQ_MASK bit to unmask */
+ intmask |= BIT(irqd_to_hwirq(d));
+ writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+ spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
+}
+
+static void altera_gpio_irq_mask(struct irq_data *d)
+{
+ struct altera_gpio_chip *altera_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ unsigned long flags;
+ u32 intmask;
+
+ altera_gc = irq_data_get_irq_chip_data(d);
+ mm_gc = &altera_gc->mmchip;
+
+ spin_lock_irqsave(&altera_gc->gpio_lock, flags);
+ intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+ /* Clear ALTERA_GPIO_IRQ_MASK bit to mask */
+ intmask &= ~BIT(irqd_to_hwirq(d));
+ writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+ spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
+}
+
+/**
+ * This controller's IRQ type is synthesized in hardware, so this function
+ * just checks if the requested set_type matches the synthesized IRQ type
+ */
+static int altera_gpio_irq_set_type(struct irq_data *d,
+ unsigned int type)
+{
+ struct altera_gpio_chip *altera_gc;
+
+ altera_gc = irq_data_get_irq_chip_data(d);
+
+ if (type == IRQ_TYPE_NONE)
+ return 0;
+ if (type == IRQ_TYPE_LEVEL_HIGH &&
+ altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH)
+ return 0;
+ if (type == IRQ_TYPE_EDGE_RISING &&
+ altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_RISING)
+ return 0;
+ if (type == IRQ_TYPE_EDGE_FALLING &&
+ altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_FALLING)
+ return 0;
+ if (type == IRQ_TYPE_EDGE_BOTH &&
+ altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_BOTH)
+ return 0;
+
+ return -EINVAL;
+}
+
+static unsigned int altera_gpio_irq_startup(struct irq_data *d) {
+ altera_gpio_irq_unmask(d);
+
+ return 0;
+}
+
+static struct irq_chip altera_irq_chip = {
+ .name = "altera-gpio",
+ .irq_mask = altera_gpio_irq_mask,
+ .irq_unmask = altera_gpio_irq_unmask,
+ .irq_set_type = altera_gpio_irq_set_type,
+ .irq_startup = altera_gpio_irq_startup,
+ .irq_shutdown = altera_gpio_irq_mask,
+};
+
+static int altera_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct of_mm_gpio_chip *mm_gc;
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+
+ return !!(readl(mm_gc->regs + ALTERA_GPIO_DATA) & BIT(offset));
+}
+
+static void altera_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct of_mm_gpio_chip *mm_gc;
+ struct altera_gpio_chip *chip;
+ unsigned long flags;
+ unsigned int data_reg;
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+ chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+ data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+ if (value)
+ data_reg |= BIT(offset);
+ else
+ data_reg &= ~BIT(offset);
+ writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+static int altera_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct of_mm_gpio_chip *mm_gc;
+ struct altera_gpio_chip *chip;
+ unsigned long flags;
+ unsigned int gpio_ddr;
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+ chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+ /* Set pin as input, assumes software controlled IP */
+ gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
+ gpio_ddr &= ~BIT(offset);
+ writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+static int altera_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct of_mm_gpio_chip *mm_gc;
+ struct altera_gpio_chip *chip;
+ unsigned long flags;
+ unsigned int data_reg, gpio_ddr;
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+ chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+ /* Sets the GPIO value */
+ data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+ if (value)
+ data_reg |= BIT(offset);
+ else
+ data_reg &= ~BIT(offset);
+ writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
+
+ /* Set pin as output, assumes software controlled IP */
+ gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
+ gpio_ddr |= BIT(offset);
+ writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+static void altera_gpio_irq_edge_handler(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct altera_gpio_chip *altera_gc;
+ struct irq_chip *chip;
+ struct of_mm_gpio_chip *mm_gc;
+ struct irq_domain *irqdomain;
+ unsigned long status;
+ int i;
+
+ altera_gc = irq_desc_get_handler_data(desc);
+ chip = irq_desc_get_chip(desc);
+ mm_gc = &altera_gc->mmchip;
+ irqdomain = altera_gc->mmchip.gc.irqdomain;
+
+ chained_irq_enter(chip, desc);
+
+ while ((status =
+ (readl(mm_gc->regs + ALTERA_GPIO_EDGE_CAP) &
+ readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK)))) {
+ writel(status, mm_gc->regs + ALTERA_GPIO_EDGE_CAP);
+ for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
+ generic_handle_irq(irq_find_mapping(irqdomain, i));
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+
+static void altera_gpio_irq_leveL_high_handler(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct altera_gpio_chip *altera_gc;
+ struct irq_chip *chip;
+ struct of_mm_gpio_chip *mm_gc;
+ struct irq_domain *irqdomain;
+ unsigned long status;
+ int i;
+
+ altera_gc = irq_desc_get_handler_data(desc);
+ chip = irq_desc_get_chip(desc);
+ mm_gc = &altera_gc->mmchip;
+ irqdomain = altera_gc->mmchip.gc.irqdomain;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+ status &= readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+
+ for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
+ generic_handle_irq(irq_find_mapping(irqdomain, i));
+ }
+ chained_irq_exit(chip, desc);
+}
+
+static int altera_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int reg, ret;
+ struct altera_gpio_chip *altera_gc;
+
+ altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
+ if (!altera_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&altera_gc->gpio_lock);
+
+ if (of_property_read_u32(node, "altr,ngpio", &reg))
+ /* By default assume maximum ngpio */
+ altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
+ else
+ altera_gc->mmchip.gc.ngpio = reg;
+
+ if (altera_gc->mmchip.gc.ngpio > ALTERA_GPIO_MAX_NGPIO) {
+ dev_warn(&pdev->dev,
+ "ngpio is greater than %d, defaulting to %d\n",
+ ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
+ altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
+ }
+
+ altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input;
+ altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output;
+ altera_gc->mmchip.gc.get = altera_gpio_get;
+ altera_gc->mmchip.gc.set = altera_gpio_set;
+ altera_gc->mmchip.gc.owner = THIS_MODULE;
+ altera_gc->mmchip.gc.dev = &pdev->dev;
+
+ ret = of_mm_gpiochip_add(node, &altera_gc->mmchip);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, altera_gc);
+
+ altera_gc->mapped_irq = platform_get_irq(pdev, 0);
+
+ if (altera_gc->mapped_irq < 0)
+ goto skip_irq;
+
+ if (of_property_read_u32(node, "altr,interrupt-type", &reg)) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev,
+ "altr,interrupt-type value not set in device tree\n");
+ goto teardown;
+ }
+ altera_gc->interrupt_trigger = reg;
+
+ ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+
+ if (ret) {
+ dev_info(&pdev->dev, "could not add irqchip\n");
+ return ret;
+ }
+
+ gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc,
+ &altera_irq_chip,
+ altera_gc->mapped_irq,
+ altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ?
+ altera_gpio_irq_leveL_high_handler :
+ altera_gpio_irq_edge_handler);
+
+skip_irq:
+ return 0;
+teardown:
+ pr_err("%s: registration failed with status %d\n",
+ node->full_name, ret);
+
+ return ret;
+}
+
+static int altera_gpio_remove(struct platform_device *pdev)
+{
+ struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&altera_gc->mmchip.gc);
+
+ return -EIO;
+}
+
+static const struct of_device_id altera_gpio_of_match[] = {
+ { .compatible = "altr,pio-1.0", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
+
+static struct platform_driver altera_gpio_driver = {
+ .driver = {
+ .name = "altera_gpio",
+ .of_match_table = of_match_ptr(altera_gpio_of_match),
+ },
+ .probe = altera_gpio_probe,
+ .remove = altera_gpio_remove,
+};
+
+static int __init altera_gpio_init(void)
+{
+ return platform_driver_register(&altera_gpio_driver);
+}
+subsys_initcall(altera_gpio_init);
+
+static void __exit altera_gpio_exit(void)
+{
+ platform_driver_unregister(&altera_gpio_driver);
+}
+module_exit(altera_gpio_exit);
+
+MODULE_AUTHOR("Tien Hock Loh <thloh@altera.com>");
+MODULE_DESCRIPTION("Altera GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 9665d0a..052fbc8 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -103,7 +103,7 @@ static int arizona_gpio_probe(struct platform_device *pdev)
arizona_gpio = devm_kzalloc(&pdev->dev, sizeof(*arizona_gpio),
GFP_KERNEL);
- if (arizona_gpio == NULL)
+ if (!arizona_gpio)
return -ENOMEM;
arizona_gpio->arizona = arizona;
@@ -156,7 +156,6 @@ static int arizona_gpio_remove(struct platform_device *pdev)
static struct platform_driver arizona_gpio_driver = {
.driver.name = "arizona-gpio",
- .driver.owner = THIS_MODULE,
.probe = arizona_gpio_probe,
.remove = arizona_gpio_remove,
};
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 3d9e08f..91a7ffe 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -24,7 +24,7 @@
#include <linux/mfd/intel_soc_pmic.h>
#define CRYSTALCOVE_GPIO_NUM 16
-#define CRYSTALCOVE_VGPIO_NUM 94
+#define CRYSTALCOVE_VGPIO_NUM 95
#define UPDATE_IRQ_TYPE BIT(0)
#define UPDATE_IRQ_MASK BIT(1)
@@ -39,6 +39,7 @@
#define GPIO0P0CTLI 0x33
#define GPIO1P0CTLO 0x3b
#define GPIO1P0CTLI 0x43
+#define GPIOPANELCTL 0x52
#define CTLI_INTCNT_DIS (0)
#define CTLI_INTCNT_NE (1 << 1)
@@ -93,6 +94,10 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type)
{
int reg;
+ if (gpio == 94) {
+ return GPIOPANELCTL;
+ }
+
if (reg_type == CTRL_IN) {
if (gpio < 8)
reg = GPIO0P0CTLI;
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index 389a4d2..2e9578e 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -212,7 +212,7 @@ static int da9052_gpio_probe(struct platform_device *pdev)
int ret;
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
- if (gpio == NULL)
+ if (!gpio)
return -ENOMEM;
gpio->da9052 = dev_get_drvdata(pdev->dev.parent);
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
index b8d7570..7227e6e 100644
--- a/drivers/gpio/gpio-da9055.c
+++ b/drivers/gpio/gpio-da9055.c
@@ -146,7 +146,7 @@ static int da9055_gpio_probe(struct platform_device *pdev)
int ret;
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
- if (gpio == NULL)
+ if (!gpio)
return -ENOMEM;
gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 1be291a..dbda843 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -1,5 +1,5 @@
/*
- * GPIO driver for Fintek Super-I/O F71882 and F71889
+ * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882 and F71889
*
* Copyright (C) 2010-2013 LaCie
*
@@ -32,12 +32,16 @@
#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
+#define SIO_F71869_ID 0x0814 /* F71869 chipset ID */
+#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */
-enum chips { f71882fg, f71889f };
+enum chips { f71869, f71869a, f71882fg, f71889f };
static const char * const f7188x_names[] = {
+ "f71869",
+ "f71869a",
"f71882fg",
"f71889f",
};
@@ -146,6 +150,27 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
/* Output mode register (0:open drain 1:push-pull). */
#define gpio_out_mode(base) (base + 3)
+static struct f7188x_gpio_bank f71869_gpio_bank[] = {
+ F7188X_GPIO_BANK(0, 6, 0xF0),
+ F7188X_GPIO_BANK(10, 8, 0xE0),
+ F7188X_GPIO_BANK(20, 8, 0xD0),
+ F7188X_GPIO_BANK(30, 8, 0xC0),
+ F7188X_GPIO_BANK(40, 8, 0xB0),
+ F7188X_GPIO_BANK(50, 5, 0xA0),
+ F7188X_GPIO_BANK(60, 6, 0x90),
+};
+
+static struct f7188x_gpio_bank f71869a_gpio_bank[] = {
+ F7188X_GPIO_BANK(0, 6, 0xF0),
+ F7188X_GPIO_BANK(10, 8, 0xE0),
+ F7188X_GPIO_BANK(20, 8, 0xD0),
+ F7188X_GPIO_BANK(30, 8, 0xC0),
+ F7188X_GPIO_BANK(40, 8, 0xB0),
+ F7188X_GPIO_BANK(50, 5, 0xA0),
+ F7188X_GPIO_BANK(60, 8, 0x90),
+ F7188X_GPIO_BANK(70, 8, 0x80),
+};
+
static struct f7188x_gpio_bank f71882_gpio_bank[] = {
F7188X_GPIO_BANK(0 , 8, 0xF0),
F7188X_GPIO_BANK(10, 8, 0xE0),
@@ -281,6 +306,14 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
switch (sio->type) {
+ case f71869:
+ data->nr_bank = ARRAY_SIZE(f71869_gpio_bank);
+ data->bank = f71869_gpio_bank;
+ break;
+ case f71869a:
+ data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank);
+ data->bank = f71869a_gpio_bank;
+ break;
case f71882fg:
data->nr_bank = ARRAY_SIZE(f71882_gpio_bank);
data->bank = f71882_gpio_bank;
@@ -354,6 +387,12 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
devid = superio_inw(addr, SIO_DEVID);
switch (devid) {
+ case SIO_F71869_ID:
+ sio->type = f71869;
+ break;
+ case SIO_F71869A_ID:
+ sio->type = f71869a;
+ break;
case SIO_F71882_ID:
sio->type = f71882fg;
break;
@@ -410,7 +449,7 @@ err:
}
/*
- * Try to match a supported Fintech device by reading the (hard-wired)
+ * Try to match a supported Fintek device by reading the (hard-wired)
* configuration I/O ports. If available, then register both the platform
* device and driver to support the GPIOs.
*/
@@ -450,6 +489,6 @@ static void __exit f7188x_gpio_exit(void)
}
module_exit(f7188x_gpio_exit);
-MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71882FG and F71889F");
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG and F71889F");
MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 7818cd1..4ba7ed5 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -173,6 +173,11 @@ static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
return !!(ichx_priv.use_gpio & (1 << (nr / 32)));
}
+static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned nr)
+{
+ return ichx_read_bit(GPIO_IO_SEL, nr) ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
+}
+
static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
{
/*
@@ -286,6 +291,7 @@ static void ichx_gpiolib_setup(struct gpio_chip *chip)
ichx_priv.desc->get : ichx_gpio_get;
chip->set = ichx_gpio_set;
+ chip->get_direction = ichx_gpio_get_direction;
chip->direction_input = ichx_gpio_direction_input;
chip->direction_output = ichx_gpio_direction_output;
chip->base = modparam_gpiobase;
diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c
index 443518f..6b8115f 100644
--- a/drivers/gpio/gpio-kempld.c
+++ b/drivers/gpio/gpio-kempld.c
@@ -156,7 +156,7 @@ static int kempld_gpio_probe(struct platform_device *pdev)
}
gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
- if (gpio == NULL)
+ if (!gpio)
return -ENOMEM;
gpio->pld = pld;
diff --git a/arch/mips/loongson/common/gpio.c b/drivers/gpio/gpio-loongson.c
index 29dbaa2..ccc65a1 100644
--- a/arch/mips/loongson/common/gpio.c
+++ b/drivers/gpio/gpio-loongson.c
@@ -1,8 +1,10 @@
/*
- * STLS2F GPIO Support
+ * Loongson-2F/3A/3B GPIO Support
*
* Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
* Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2013 Hongbing Hu <huhb@lemote.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,67 +22,23 @@
#include <linux/gpio.h>
#define STLS2F_N_GPIO 4
-#define STLS2F_GPIO_IN_OFFSET 16
+#define STLS3A_N_GPIO 16
-static DEFINE_SPINLOCK(gpio_lock);
-
-int gpio_get_value(unsigned gpio)
-{
- u32 val;
- u32 mask;
-
- if (gpio >= STLS2F_N_GPIO)
- return __gpio_get_value(gpio);
-
- mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
- spin_lock(&gpio_lock);
- val = LOONGSON_GPIODATA;
- spin_unlock(&gpio_lock);
+#ifdef CONFIG_CPU_LOONGSON3
+#define LOONGSON_N_GPIO STLS3A_N_GPIO
+#else
+#define LOONGSON_N_GPIO STLS2F_N_GPIO
+#endif
- return (val & mask) != 0;
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int state)
-{
- u32 val;
- u32 mask;
-
- if (gpio >= STLS2F_N_GPIO) {
- __gpio_set_value(gpio, state);
- return ;
- }
-
- mask = 1 << gpio;
-
- spin_lock(&gpio_lock);
- val = LOONGSON_GPIODATA;
- if (state)
- val |= mask;
- else
- val &= (~mask);
- LOONGSON_GPIODATA = val;
- spin_unlock(&gpio_lock);
-}
-EXPORT_SYMBOL(gpio_set_value);
+#define LOONGSON_GPIO_IN_OFFSET 16
-int gpio_cansleep(unsigned gpio)
-{
- if (gpio < STLS2F_N_GPIO)
- return 0;
- else
- return __gpio_cansleep(gpio);
-}
-EXPORT_SYMBOL(gpio_cansleep);
+static DEFINE_SPINLOCK(gpio_lock);
-static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
- return -EINVAL;
-
spin_lock(&gpio_lock);
mask = 1 << gpio;
temp = LOONGSON_GPIOIE;
@@ -91,15 +49,12 @@ static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
return 0;
}
-static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+static int loongson_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int level)
{
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
- return -EINVAL;
-
gpio_set_value(gpio, level);
spin_lock(&gpio_lock);
mask = 1 << gpio;
@@ -111,29 +66,50 @@ static int ls2f_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
-static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
- return gpio_get_value(gpio);
+ u32 val;
+ u32 mask;
+
+ mask = 1 << (gpio + LOONGSON_GPIO_IN_OFFSET);
+ spin_lock(&gpio_lock);
+ val = LOONGSON_GPIODATA;
+ spin_unlock(&gpio_lock);
+
+ return (val & mask) != 0;
}
-static void ls2f_gpio_set_value(struct gpio_chip *chip,
+static void loongson_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
- gpio_set_value(gpio, value);
+ u32 val;
+ u32 mask;
+
+ mask = 1 << gpio;
+
+ spin_lock(&gpio_lock);
+ val = LOONGSON_GPIODATA;
+ if (value)
+ val |= mask;
+ else
+ val &= (~mask);
+ LOONGSON_GPIODATA = val;
+ spin_unlock(&gpio_lock);
}
-static struct gpio_chip ls2f_chip = {
- .label = "ls2f",
- .direction_input = ls2f_gpio_direction_input,
- .get = ls2f_gpio_get_value,
- .direction_output = ls2f_gpio_direction_output,
- .set = ls2f_gpio_set_value,
+static struct gpio_chip loongson_chip = {
+ .label = "Loongson-gpio-chip",
+ .direction_input = loongson_gpio_direction_input,
+ .get = loongson_gpio_get_value,
+ .direction_output = loongson_gpio_direction_output,
+ .set = loongson_gpio_set_value,
.base = 0,
- .ngpio = STLS2F_N_GPIO,
+ .ngpio = LOONGSON_N_GPIO,
+ .can_sleep = false,
};
-static int __init ls2f_gpio_setup(void)
+static int __init loongson_gpio_setup(void)
{
- return gpiochip_add(&ls2f_chip);
+ return gpiochip_add(&loongson_chip);
}
-arch_initcall(ls2f_gpio_setup);
+postcore_initcall(loongson_gpio_setup);
diff --git a/drivers/gpio/gpio-max7300.c b/drivers/gpio/gpio-max7300.c
index 40ab6df..0cc2c27 100644
--- a/drivers/gpio/gpio-max7300.c
+++ b/drivers/gpio/gpio-max7300.c
@@ -35,7 +35,6 @@ static int max7300_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max7301 *ts;
- int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
@@ -49,8 +48,7 @@ static int max7300_probe(struct i2c_client *client,
ts->write = max7300_i2c_write;
ts->dev = &client->dev;
- ret = __max730x_probe(ts);
- return ret;
+ return __max730x_probe(ts);
}
static int max7300_remove(struct i2c_client *client)
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index a095b23..0fa4543c 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -4,6 +4,7 @@
* Copyright (C) 2007 Marvell International Ltd.
* Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
* Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
*
* Derived from drivers/gpio/pca953x.c
*
@@ -16,10 +17,8 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/i2c.h>
#include <linux/i2c/max732x.h>
#include <linux/of.h>
@@ -150,9 +149,7 @@ struct max732x_chip {
uint8_t reg_out[2];
#ifdef CONFIG_GPIO_MAX732X_IRQ
- struct irq_domain *irq_domain;
struct mutex irq_lock;
- int irq_base;
uint8_t irq_mask;
uint8_t irq_mask_cur;
uint8_t irq_trig_raise;
@@ -356,35 +353,26 @@ static void max732x_irq_update_mask(struct max732x_chip *chip)
mutex_unlock(&chip->lock);
}
-static int max732x_gpio_to_irq(struct gpio_chip *gc, unsigned off)
-{
- struct max732x_chip *chip = to_max732x(gc);
-
- if (chip->irq_domain) {
- return irq_create_mapping(chip->irq_domain,
- chip->irq_base + off);
- } else {
- return -ENXIO;
- }
-}
-
static void max732x_irq_mask(struct irq_data *d)
{
- struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct max732x_chip *chip = to_max732x(gc);
chip->irq_mask_cur &= ~(1 << d->hwirq);
}
static void max732x_irq_unmask(struct irq_data *d)
{
- struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct max732x_chip *chip = to_max732x(gc);
chip->irq_mask_cur |= 1 << d->hwirq;
}
static void max732x_irq_bus_lock(struct irq_data *d)
{
- struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct max732x_chip *chip = to_max732x(gc);
mutex_lock(&chip->irq_lock);
chip->irq_mask_cur = chip->irq_mask;
@@ -392,7 +380,8 @@ static void max732x_irq_bus_lock(struct irq_data *d)
static void max732x_irq_bus_sync_unlock(struct irq_data *d)
{
- struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct max732x_chip *chip = to_max732x(gc);
uint16_t new_irqs;
uint16_t level;
@@ -410,7 +399,8 @@ static void max732x_irq_bus_sync_unlock(struct irq_data *d)
static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
{
- struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct max732x_chip *chip = to_max732x(gc);
uint16_t off = d->hwirq;
uint16_t mask = 1 << off;
@@ -492,7 +482,8 @@ static irqreturn_t max732x_irq_handler(int irq, void *devid)
do {
level = __ffs(pending);
- handle_nested_irq(irq_find_mapping(chip->irq_domain, level));
+ handle_nested_irq(irq_find_mapping(chip->gpio_chip.irqdomain,
+ level));
pending &= ~(1 << level);
} while (pending);
@@ -500,86 +491,50 @@ static irqreturn_t max732x_irq_handler(int irq, void *devid)
return IRQ_HANDLED;
}
-static int max732x_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct max732x_chip *chip = h->host_data;
-
- if (!(chip->dir_input & (1 << hw))) {
- dev_err(&chip->client->dev,
- "Attempt to map output line as IRQ line: %lu\n",
- hw);
- return -EPERM;
- }
-
- irq_set_chip_data(virq, chip);
- irq_set_chip_and_handler(virq, &max732x_irq_chip,
- handle_edge_irq);
- irq_set_nested_thread(virq, 1);
-#ifdef CONFIG_ARM
- /* ARM needs us to explicitly flag the IRQ as valid
- * and will set them noprobe when we do so. */
- set_irq_flags(virq, IRQF_VALID);
-#else
- irq_set_noprobe(virq);
-#endif
-
- return 0;
-}
-
-static struct irq_domain_ops max732x_irq_domain_ops = {
- .map = max732x_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void max732x_irq_teardown(struct max732x_chip *chip)
-{
- if (chip->client->irq && chip->irq_domain)
- irq_domain_remove(chip->irq_domain);
-}
-
static int max732x_irq_setup(struct max732x_chip *chip,
const struct i2c_device_id *id)
{
struct i2c_client *client = chip->client;
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
int has_irq = max732x_features[id->driver_data] >> 32;
+ int irq_base = 0;
int ret;
if (((pdata && pdata->irq_base) || client->irq)
&& has_irq != INT_NONE) {
if (pdata)
- chip->irq_base = pdata->irq_base;
+ irq_base = pdata->irq_base;
chip->irq_features = has_irq;
mutex_init(&chip->irq_lock);
- chip->irq_domain = irq_domain_add_simple(client->dev.of_node,
- chip->gpio_chip.ngpio, chip->irq_base,
- &max732x_irq_domain_ops, chip);
- if (!chip->irq_domain) {
- dev_err(&client->dev, "Failed to create IRQ domain\n");
- return -ENOMEM;
- }
-
- ret = request_threaded_irq(client->irq,
- NULL,
- max732x_irq_handler,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- dev_name(&client->dev), chip);
+ ret = devm_request_threaded_irq(&client->dev,
+ client->irq,
+ NULL,
+ max732x_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
- goto out_failed;
+ return ret;
}
-
- chip->gpio_chip.to_irq = max732x_gpio_to_irq;
+ ret = gpiochip_irqchip_add(&chip->gpio_chip,
+ &max732x_irq_chip,
+ irq_base,
+ handle_edge_irq,
+ IRQ_TYPE_NONE);
+ if (ret) {
+ dev_err(&client->dev,
+ "could not connect irqchip to gpiochip\n");
+ return ret;
+ }
+ gpiochip_set_chained_irqchip(&chip->gpio_chip,
+ &max732x_irq_chip,
+ client->irq,
+ NULL);
}
return 0;
-
-out_failed:
- max732x_irq_teardown(chip);
- return ret;
}
#else /* CONFIG_GPIO_MAX732X_IRQ */
@@ -595,10 +550,6 @@ static int max732x_irq_setup(struct max732x_chip *chip,
return 0;
}
-
-static void max732x_irq_teardown(struct max732x_chip *chip)
-{
-}
#endif
static int max732x_setup_gpio(struct max732x_chip *chip,
@@ -730,13 +681,15 @@ static int max732x_probe(struct i2c_client *client,
if (nr_port > 8)
max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]);
- ret = max732x_irq_setup(chip, id);
+ ret = gpiochip_add(&chip->gpio_chip);
if (ret)
goto out_failed;
- ret = gpiochip_add(&chip->gpio_chip);
- if (ret)
+ ret = max732x_irq_setup(chip, id);
+ if (ret) {
+ gpiochip_remove(&chip->gpio_chip);
goto out_failed;
+ }
if (pdata && pdata->setup) {
ret = pdata->setup(client, chip->gpio_chip.base,
@@ -751,7 +704,6 @@ static int max732x_probe(struct i2c_client *client,
out_failed:
if (chip->client_dummy)
i2c_unregister_device(chip->client_dummy);
- max732x_irq_teardown(chip);
return ret;
}
@@ -774,8 +726,6 @@ static int max732x_remove(struct i2c_client *client)
gpiochip_remove(&chip->gpio_chip);
- max732x_irq_teardown(chip);
-
/* unregister any dummy i2c_client */
if (chip->client_dummy)
i2c_unregister_device(chip->client_dummy);
diff --git a/drivers/gpio/gpio-mb86s7x.c b/drivers/gpio/gpio-mb86s7x.c
index 21b1ce5..ee93c0a 100644
--- a/drivers/gpio/gpio-mb86s7x.c
+++ b/drivers/gpio/gpio-mb86s7x.c
@@ -58,6 +58,11 @@ static int mb86s70_gpio_request(struct gpio_chip *gc, unsigned gpio)
spin_lock_irqsave(&gchip->lock, flags);
val = readl(gchip->base + PFR(gpio));
+ if (!(val & OFFSET(gpio))) {
+ spin_unlock_irqrestore(&gchip->lock, flags);
+ return -EINVAL;
+ }
+
val &= ~OFFSET(gpio);
writel(val, gchip->base + PFR(gpio));
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index 4e3e160..a431604 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -151,7 +151,7 @@ static int mc33880_remove(struct spi_device *spi)
struct mc33880 *mc;
mc = spi_get_drvdata(spi);
- if (mc == NULL)
+ if (!mc)
return -ENODEV;
gpiochip_remove(&mc->chip);
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index eea5d7e..2fc7ff8 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -949,10 +949,12 @@ static int mcp23s08_probe(struct spi_device *spi)
if (!chips)
return -ENODEV;
- data = kzalloc(sizeof(*data) + chips * sizeof(struct mcp23s08),
- GFP_KERNEL);
+ data = devm_kzalloc(&spi->dev,
+ sizeof(*data) + chips * sizeof(struct mcp23s08),
+ GFP_KERNEL);
if (!data)
return -ENOMEM;
+
spi_set_drvdata(spi, data);
spi->irq = irq_of_parse_and_map(spi->dev.of_node, 0);
@@ -989,7 +991,6 @@ fail:
continue;
gpiochip_remove(&data->mcp[addr]->chip);
}
- kfree(data);
return status;
}
@@ -1007,7 +1008,7 @@ static int mcp23s08_remove(struct spi_device *spi)
mcp23s08_irq_teardown(data->mcp[addr]);
gpiochip_remove(&data->mcp[addr]->chip);
}
- kfree(data);
+
return 0;
}
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index d0bc123..1a54205 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -320,11 +320,13 @@ static void mvebu_gpio_edge_irq_mask(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mvebu_gpio_chip *mvchip = gc->private;
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
u32 mask = 1 << (d->irq - gc->irq_base);
irq_gc_lock(gc);
- gc->mask_cache &= ~mask;
- writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+ ct->mask_cache_priv &= ~mask;
+
+ writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_edge_mask(mvchip));
irq_gc_unlock(gc);
}
@@ -332,11 +334,13 @@ static void mvebu_gpio_edge_irq_unmask(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mvebu_gpio_chip *mvchip = gc->private;
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
u32 mask = 1 << (d->irq - gc->irq_base);
irq_gc_lock(gc);
- gc->mask_cache |= mask;
- writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+ ct->mask_cache_priv |= mask;
+ writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_edge_mask(mvchip));
irq_gc_unlock(gc);
}
@@ -344,11 +348,13 @@ static void mvebu_gpio_level_irq_mask(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mvebu_gpio_chip *mvchip = gc->private;
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
u32 mask = 1 << (d->irq - gc->irq_base);
irq_gc_lock(gc);
- gc->mask_cache &= ~mask;
- writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+ ct->mask_cache_priv &= ~mask;
+ writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_level_mask(mvchip));
irq_gc_unlock(gc);
}
@@ -356,11 +362,13 @@ static void mvebu_gpio_level_irq_unmask(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mvebu_gpio_chip *mvchip = gc->private;
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
u32 mask = 1 << (d->irq - gc->irq_base);
irq_gc_lock(gc);
- gc->mask_cache |= mask;
- writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+ ct->mask_cache_priv |= mask;
+ writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_level_mask(mvchip));
irq_gc_unlock(gc);
}
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index f476ae2..cd1d5bf 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -75,14 +75,12 @@ struct gpio_bank {
int power_mode;
bool workaround_enabled;
- void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+ void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
int (*get_context_loss_count)(struct device *dev);
struct omap_gpio_reg_offs *regs;
};
-#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
-#define GPIO_BIT(bank, gpio) (BIT(GPIO_INDEX(bank, gpio)))
#define GPIO_MOD_CTRL_BIT BIT(0)
#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
@@ -90,11 +88,6 @@ struct gpio_bank {
static void omap_gpio_unmask_irq(struct irq_data *d);
-static int omap_irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
-{
- return bank->chip.base + gpio_irq;
-}
-
static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
@@ -119,11 +112,11 @@ static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
/* set data out value using dedicate set/clear register */
-static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, int gpio,
+static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset,
int enable)
{
void __iomem *reg = bank->base;
- u32 l = GPIO_BIT(bank, gpio);
+ u32 l = BIT(offset);
if (enable) {
reg += bank->regs->set_dataout;
@@ -137,11 +130,11 @@ static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, int gpio,
}
/* set data out value using mask register */
-static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, int gpio,
+static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
int enable)
{
void __iomem *reg = bank->base + bank->regs->dataout;
- u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 gpio_bit = BIT(offset);
u32 l;
l = readl_relaxed(reg);
@@ -208,13 +201,13 @@ static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
/**
* omap2_set_gpio_debounce - low level gpio debounce time
* @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
+ * @offset: the gpio number on this @bank
* @debounce: debounce time to use
*
* OMAP's debounce time is in 31us steps so we need
* to convert and round up to the closest unit.
*/
-static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
unsigned debounce)
{
void __iomem *reg;
@@ -231,7 +224,7 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
else
debounce = (debounce / 0x1f) - 1;
- l = GPIO_BIT(bank, gpio);
+ l = BIT(offset);
clk_prepare_enable(bank->dbck);
reg = bank->base + bank->regs->debounce;
@@ -266,16 +259,16 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
/**
* omap_clear_gpio_debounce - clear debounce settings for a gpio
* @bank: the gpio bank we're acting upon
- * @gpio: the gpio number on this @gpio
+ * @offset: the gpio number on this @bank
*
* If a gpio is using debounce, then clear the debounce enable bit and if
* this is the only gpio in this bank using debounce, then clear the debounce
* time too. The debounce clock will also be disabled when calling this function
* if this is the only gpio in the bank using debounce.
*/
-static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
+static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
{
- u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 gpio_bit = BIT(offset);
if (!bank->dbck_flag)
return;
@@ -472,42 +465,32 @@ static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset)
}
}
-static int omap_gpio_is_input(struct gpio_bank *bank, int mask)
+static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset)
{
void __iomem *reg = bank->base + bank->regs->direction;
- return readl_relaxed(reg) & mask;
+ return readl_relaxed(reg) & BIT(offset);
}
-static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned gpio,
- unsigned offset)
+static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset)
{
if (!LINE_USED(bank->mod_usage, offset)) {
omap_enable_gpio_module(bank, offset);
omap_set_gpio_direction(bank, offset, 1);
}
- bank->irq_usage |= BIT(GPIO_INDEX(bank, gpio));
+ bank->irq_usage |= BIT(offset);
}
static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned gpio = 0;
int retval;
unsigned long flags;
- unsigned offset;
+ unsigned offset = d->hwirq;
if (!BANK_USED(bank))
pm_runtime_get_sync(bank->dev);
-#ifdef CONFIG_ARCH_OMAP1
- if (d->irq > IH_MPUIO_BASE)
- gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-#endif
-
- if (!gpio)
- gpio = omap_irq_to_gpio(bank, d->hwirq);
-
if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
@@ -516,10 +499,9 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
return -EINVAL;
spin_lock_irqsave(&bank->lock, flags);
- offset = GPIO_INDEX(bank, gpio);
retval = omap_set_gpio_triggering(bank, offset, type);
- omap_gpio_init_irq(bank, gpio, offset);
- if (!omap_gpio_is_input(bank, BIT(offset))) {
+ omap_gpio_init_irq(bank, offset);
+ if (!omap_gpio_is_input(bank, offset)) {
spin_unlock_irqrestore(&bank->lock, flags);
return -EINVAL;
}
@@ -550,9 +532,10 @@ static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
readl_relaxed(reg);
}
-static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
+static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
+ unsigned offset)
{
- omap_clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_clear_gpio_irqbank(bank, BIT(offset));
}
static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
@@ -613,13 +596,13 @@ static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
writel_relaxed(l, reg);
}
-static inline void omap_set_gpio_irqenable(struct gpio_bank *bank, int gpio,
- int enable)
+static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
+ unsigned offset, int enable)
{
if (enable)
- omap_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_enable_gpio_irqbank(bank, BIT(offset));
else
- omap_disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_disable_gpio_irqbank(bank, BIT(offset));
}
/*
@@ -630,14 +613,16 @@ static inline void omap_set_gpio_irqenable(struct gpio_bank *bank, int gpio,
* enabled. When system is suspended, only selected GPIO interrupts need
* to have wake-up enabled.
*/
-static int omap_set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
+ int enable)
{
- u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 gpio_bit = BIT(offset);
unsigned long flags;
if (bank->non_wakeup_gpios & gpio_bit) {
dev_err(bank->dev,
- "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
+ "Unable to modify wakeup on non-wakeup GPIO%d\n",
+ offset);
return -EINVAL;
}
@@ -653,22 +638,22 @@ static int omap_set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
return 0;
}
-static void omap_reset_gpio(struct gpio_bank *bank, int gpio)
+static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
{
- omap_set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_clear_gpio_irqstatus(bank, gpio);
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
- omap_clear_gpio_debounce(bank, gpio);
+ omap_set_gpio_direction(bank, offset, 1);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_clear_gpio_debounce(bank, offset);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;
- return omap_set_gpio_wakeup(bank, gpio, enable);
+ return omap_set_gpio_wakeup(bank, offset, enable);
}
static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -706,7 +691,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&bank->lock, flags);
bank->mod_usage &= ~(BIT(offset));
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, bank->chip.base + offset);
+ omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);
/*
@@ -803,15 +788,14 @@ exit:
static unsigned int omap_gpio_irq_startup(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
unsigned long flags;
- unsigned offset = GPIO_INDEX(bank, gpio);
+ unsigned offset = d->hwirq;
if (!BANK_USED(bank))
pm_runtime_get_sync(bank->dev);
spin_lock_irqsave(&bank->lock, flags);
- omap_gpio_init_irq(bank, gpio, offset);
+ omap_gpio_init_irq(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);
omap_gpio_unmask_irq(d);
@@ -821,15 +805,13 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
static void omap_gpio_irq_shutdown(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
unsigned long flags;
- unsigned offset = GPIO_INDEX(bank, gpio);
+ unsigned offset = d->hwirq;
spin_lock_irqsave(&bank->lock, flags);
- gpiochip_unlock_as_irq(&bank->chip, offset);
bank->irq_usage &= ~(BIT(offset));
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, gpio);
+ omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);
/*
@@ -843,43 +825,42 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
static void omap_gpio_ack_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;
- omap_clear_gpio_irqstatus(bank, gpio);
+ omap_clear_gpio_irqstatus(bank, offset);
}
static void omap_gpio_mask_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
spin_unlock_irqrestore(&bank->lock, flags);
}
static void omap_gpio_unmask_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
- unsigned int irq_mask = GPIO_BIT(bank, gpio);
+ unsigned offset = d->hwirq;
u32 trigger = irqd_get_trigger_type(d);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
if (trigger)
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
+ omap_set_gpio_triggering(bank, offset, trigger);
/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & irq_mask) {
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_clear_gpio_irqstatus(bank, gpio);
+ if (bank->level_mask & BIT(offset)) {
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
}
- omap_set_gpio_irqenable(bank, gpio, 1);
+ omap_set_gpio_irqenable(bank, offset, 1);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -977,12 +958,10 @@ static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct gpio_bank *bank;
- u32 mask;
bank = container_of(chip, struct gpio_bank, chip);
- mask = (BIT(offset));
- if (omap_gpio_is_input(bank, mask))
+ if (omap_gpio_is_input(bank, offset))
return omap_get_gpio_datain(bank, offset);
else
return omap_get_gpio_dataout(bank, offset);
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 236708a..945f0cd 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -88,11 +88,9 @@ struct pcf857x {
struct gpio_chip chip;
struct i2c_client *client;
struct mutex lock; /* protect 'out' */
- struct irq_domain *irq_domain; /* for irq demux */
spinlock_t slock; /* protect irq demux */
unsigned out; /* software latch */
unsigned status; /* current status */
- unsigned irq_mapped; /* mapped gpio irqs */
int (*write)(struct i2c_client *client, unsigned data);
int (*read)(struct i2c_client *client);
@@ -182,18 +180,6 @@ static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
/*-------------------------------------------------------------------------*/
-static int pcf857x_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
- int ret;
-
- ret = irq_create_mapping(gpio->irq_domain, offset);
- if (ret > 0)
- gpio->irq_mapped |= (1 << offset);
-
- return ret;
-}
-
static irqreturn_t pcf857x_irq(int irq, void *data)
{
struct pcf857x *gpio = data;
@@ -208,9 +194,9 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
* interrupt source, just to avoid bad irqs
*/
- change = ((gpio->status ^ status) & gpio->irq_mapped);
+ change = (gpio->status ^ status);
for_each_set_bit(i, &change, gpio->chip.ngpio)
- generic_handle_irq(irq_find_mapping(gpio->irq_domain, i));
+ handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i));
gpio->status = status;
spin_unlock_irqrestore(&gpio->slock, flags);
@@ -218,66 +204,36 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
return IRQ_HANDLED;
}
-static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hw)
-{
- struct pcf857x *gpio = domain->host_data;
-
- irq_set_chip_and_handler(irq,
- &dummy_irq_chip,
- handle_level_irq);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
- gpio->irq_mapped |= (1 << hw);
-
- return 0;
-}
-
-static struct irq_domain_ops pcf857x_irq_domain_ops = {
- .map = pcf857x_irq_domain_map,
-};
+/*
+ * NOP functions
+ */
+static void noop(struct irq_data *data) { }
-static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
+static unsigned int noop_ret(struct irq_data *data)
{
- if (gpio->irq_domain)
- irq_domain_remove(gpio->irq_domain);
-
+ return 0;
}
-static int pcf857x_irq_domain_init(struct pcf857x *gpio,
- struct i2c_client *client)
+static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
{
- int status;
-
- gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
- gpio->chip.ngpio,
- &pcf857x_irq_domain_ops,
- gpio);
- if (!gpio->irq_domain)
- goto fail;
-
- /* enable real irq */
- status = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, pcf857x_irq, IRQF_ONESHOT |
- IRQF_TRIGGER_FALLING | IRQF_SHARED,
- dev_name(&client->dev), gpio);
-
- if (status)
- goto fail;
-
- /* enable gpio_to_irq() */
- gpio->chip.to_irq = pcf857x_to_irq;
+ struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+ irq_set_irq_wake(gpio->client->irq, on);
return 0;
-
-fail:
- pcf857x_irq_domain_cleanup(gpio);
- return -EINVAL;
}
+static struct irq_chip pcf857x_irq_chip = {
+ .name = "pcf857x",
+ .irq_startup = noop_ret,
+ .irq_shutdown = noop,
+ .irq_enable = noop,
+ .irq_disable = noop,
+ .irq_ack = noop,
+ .irq_mask = noop,
+ .irq_unmask = noop,
+ .irq_set_wake = pcf857x_irq_set_wake,
+};
+
/*-------------------------------------------------------------------------*/
static int pcf857x_probe(struct i2c_client *client,
@@ -314,15 +270,6 @@ static int pcf857x_probe(struct i2c_client *client,
gpio->chip.direction_output = pcf857x_output;
gpio->chip.ngpio = id->driver_data;
- /* enable gpio_to_irq() if platform has settings */
- if (client->irq) {
- status = pcf857x_irq_domain_init(gpio, client);
- if (status < 0) {
- dev_err(&client->dev, "irq_domain init failed\n");
- goto fail_irq_domain;
- }
- }
-
/* NOTE: the OnSemi jlc1562b is also largely compatible with
* these parts, notably for output. It has a low-resolution
* DAC instead of pin change IRQs; and its inputs can be the
@@ -398,6 +345,27 @@ static int pcf857x_probe(struct i2c_client *client,
if (status < 0)
goto fail;
+ /* Enable irqchip if we have an interrupt */
+ if (client->irq) {
+ status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
+ 0, handle_level_irq,
+ IRQ_TYPE_NONE);
+ if (status) {
+ dev_err(&client->dev, "cannot add irqchip\n");
+ goto fail_irq;
+ }
+
+ status = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, pcf857x_irq, IRQF_ONESHOT |
+ IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ dev_name(&client->dev), gpio);
+ if (status)
+ goto fail_irq;
+
+ gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
+ client->irq, NULL);
+ }
+
/* Let platform code set up the GPIOs and their users.
* Now is the first time anyone could use them.
*/
@@ -413,13 +381,12 @@ static int pcf857x_probe(struct i2c_client *client,
return 0;
-fail:
- if (client->irq)
- pcf857x_irq_domain_cleanup(gpio);
+fail_irq:
+ gpiochip_remove(&gpio->chip);
-fail_irq_domain:
- dev_dbg(&client->dev, "probe error %d for '%s'\n",
- status, client->name);
+fail:
+ dev_dbg(&client->dev, "probe error %d for '%s'\n", status,
+ client->name);
return status;
}
@@ -441,9 +408,6 @@ static int pcf857x_remove(struct i2c_client *client)
}
}
- if (client->irq)
- pcf857x_irq_domain_cleanup(gpio);
-
gpiochip_remove(&gpio->chip);
return status;
}
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 2fdb04b..cdbbcf0 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -59,8 +59,7 @@
#define GAFR_OFFSET 0x54
#define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : ((n) > 5 ? 0x200 : 0x100) \
- + (((n) % 3) << 2))
+#define BANK_OFF(n) (((n) / 3) << 8) + (((n) % 3) << 2)
int pxa_last_gpio;
static int irq_base;
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index c49522e..fd39774 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
@@ -37,20 +38,22 @@ struct gpio_rcar_priv {
struct platform_device *pdev;
struct gpio_chip gpio_chip;
struct irq_chip irq_chip;
+ unsigned int irq_parent;
+ struct clk *clk;
};
-#define IOINTSEL 0x00
-#define INOUTSEL 0x04
-#define OUTDT 0x08
-#define INDT 0x0c
-#define INTDT 0x10
-#define INTCLR 0x14
-#define INTMSK 0x18
-#define MSKCLR 0x1c
-#define POSNEG 0x20
-#define EDGLEVEL 0x24
-#define FILONOFF 0x28
-#define BOTHEDGE 0x4c
+#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
+#define INOUTSEL 0x04 /* General Input/Output Switching Register */
+#define OUTDT 0x08 /* General Output Register */
+#define INDT 0x0c /* General Input Register */
+#define INTDT 0x10 /* Interrupt Display Register */
+#define INTCLR 0x14 /* Interrupt Clear Register */
+#define INTMSK 0x18 /* Interrupt Mask Register */
+#define MSKCLR 0x1c /* Interrupt Mask Clear Register */
+#define POSNEG 0x20 /* Positive/Negative Logic Select Register */
+#define EDGLEVEL 0x24 /* Edge/level Select Register */
+#define FILONOFF 0x28 /* Chattering Prevention On/Off Register */
+#define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */
#define RCAR_MAX_GPIO_PER_BANK 32
@@ -169,6 +172,25 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
return 0;
}
+static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv,
+ gpio_chip);
+
+ irq_set_irq_wake(p->irq_parent, on);
+
+ if (!p->clk)
+ return 0;
+
+ if (on)
+ clk_enable(p->clk);
+ else
+ clk_disable(p->clk);
+
+ return 0;
+}
+
static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
{
struct gpio_rcar_priv *p = dev_id;
@@ -367,6 +389,12 @@ static int gpio_rcar_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, p);
+ p->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(p->clk)) {
+ dev_warn(dev, "unable to get clock\n");
+ p->clk = NULL;
+ }
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -404,8 +432,8 @@ static int gpio_rcar_probe(struct platform_device *pdev)
irq_chip->irq_mask = gpio_rcar_irq_disable;
irq_chip->irq_unmask = gpio_rcar_irq_enable;
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
- irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED
- | IRQCHIP_MASK_ON_SUSPEND;
+ irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
+ irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
ret = gpiochip_add(gpio_chip);
if (ret) {
@@ -413,13 +441,14 @@ static int gpio_rcar_probe(struct platform_device *pdev)
goto err0;
}
- ret = gpiochip_irqchip_add(&p->gpio_chip, irq_chip, p->config.irq_base,
+ ret = gpiochip_irqchip_add(gpio_chip, irq_chip, p->config.irq_base,
handle_level_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(dev, "cannot add irqchip\n");
goto err1;
}
+ p->irq_parent = irq->start;
if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
IRQF_SHARED, name, p)) {
dev_err(dev, "failed to request IRQ\n");
@@ -431,7 +460,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
/* warn in case of mismatch if irq base is specified */
if (p->config.irq_base) {
- ret = irq_find_mapping(p->gpio_chip.irqdomain, 0);
+ ret = irq_find_mapping(gpio_chip->irqdomain, 0);
if (p->config.irq_base != ret)
dev_warn(dev, "irq base mismatch (%u/%u)\n",
p->config.irq_base, ret);
@@ -447,7 +476,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
return 0;
err1:
- gpiochip_remove(&p->gpio_chip);
+ gpiochip_remove(gpio_chip);
err0:
pm_runtime_put(dev);
pm_runtime_disable(dev);
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index 62ab9f4..46b8961 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -283,7 +283,7 @@ fail_ioremap:
return ret;
}
-static int __exit tb10x_gpio_remove(struct platform_device *pdev)
+static int tb10x_gpio_remove(struct platform_device *pdev)
{
struct tb10x_gpio *tb10x_gpio = platform_get_drvdata(pdev);
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 971c739..7bd9f20 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -244,16 +244,16 @@ static int vf610_gpio_probe(struct platform_device *pdev)
gc = &port->gc;
gc->of_node = np;
gc->dev = dev;
- gc->label = "vf610-gpio",
- gc->ngpio = VF610_GPIO_PER_PORT,
+ gc->label = "vf610-gpio";
+ gc->ngpio = VF610_GPIO_PER_PORT;
gc->base = of_alias_get_id(np, "gpio") * VF610_GPIO_PER_PORT;
- gc->request = vf610_gpio_request,
- gc->free = vf610_gpio_free,
- gc->direction_input = vf610_gpio_direction_input,
- gc->get = vf610_gpio_get,
- gc->direction_output = vf610_gpio_direction_output,
- gc->set = vf610_gpio_set,
+ gc->request = vf610_gpio_request;
+ gc->free = vf610_gpio_free;
+ gc->direction_input = vf610_gpio_direction_input;
+ gc->get = vf610_gpio_get;
+ gc->direction_output = vf610_gpio_direction_output;
+ gc->set = vf610_gpio_set;
ret = gpiochip_add(gc);
if (ret < 0)
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index b6a15c3..fb9d29a 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -93,7 +93,7 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
- if (!regs)
+ if (IS_ERR(regs))
return PTR_ERR(regs);
ret = bgpio_init(&priv->bgc, &pdev->dev, 4,
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index df990f2..d2303d5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -304,7 +304,7 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
return;
INIT_LIST_HEAD(&acpi_gpio->events);
- acpi_walk_resources(ACPI_HANDLE(chip->dev), "_AEI",
+ acpi_walk_resources(handle, "_AEI",
acpi_gpiochip_request_interrupt, acpi_gpio);
}
@@ -722,3 +722,87 @@ void acpi_gpiochip_remove(struct gpio_chip *chip)
acpi_detach_data(handle, acpi_gpio_chip_dh);
kfree(acpi_gpio);
}
+
+static unsigned int acpi_gpio_package_count(const union acpi_object *obj)
+{
+ const union acpi_object *element = obj->package.elements;
+ const union acpi_object *end = element + obj->package.count;
+ unsigned int count = 0;
+
+ while (element < end) {
+ if (element->type == ACPI_TYPE_LOCAL_REFERENCE)
+ count++;
+
+ element++;
+ }
+ return count;
+}
+
+static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
+{
+ unsigned int *count = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
+ *count += ares->data.gpio.pin_table_length;
+
+ return 1;
+}
+
+/**
+ * acpi_gpio_count - return the number of GPIOs associated with a
+ * device / function or -ENOENT if no GPIO has been
+ * assigned to the requested function.
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ */
+int acpi_gpio_count(struct device *dev, const char *con_id)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ const union acpi_object *obj;
+ const struct acpi_gpio_mapping *gm;
+ int count = -ENOENT;
+ int ret;
+ char propname[32];
+ unsigned int i;
+
+ /* Try first from _DSD */
+ for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+ if (con_id && strcmp(con_id, "gpios"))
+ snprintf(propname, sizeof(propname), "%s-%s",
+ con_id, gpio_suffixes[i]);
+ else
+ snprintf(propname, sizeof(propname), "%s",
+ gpio_suffixes[i]);
+
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
+ &obj);
+ if (ret == 0) {
+ if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
+ count = 1;
+ else if (obj->type == ACPI_TYPE_PACKAGE)
+ count = acpi_gpio_package_count(obj);
+ } else if (adev->driver_gpios) {
+ for (gm = adev->driver_gpios; gm->name; gm++)
+ if (strcmp(propname, gm->name) == 0) {
+ count = gm->size;
+ break;
+ }
+ }
+ if (count >= 0)
+ break;
+ }
+
+ /* Then from plain _CRS GPIOs */
+ if (count < 0) {
+ struct list_head resource_list;
+ unsigned int crs_count = 0;
+
+ INIT_LIST_HEAD(&resource_list);
+ acpi_dev_get_resources(adev, &resource_list,
+ acpi_find_gpio_count, &crs_count);
+ acpi_dev_free_resource_list(&resource_list);
+ if (crs_count > 0)
+ count = crs_count;
+ }
+ return count;
+}
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 4650bf8..a6c67c6 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -22,6 +22,7 @@
#include <linux/of_gpio.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
+#include <linux/gpio/machine.h>
#include "gpiolib.h"
@@ -118,6 +119,114 @@ int of_get_named_gpio_flags(struct device_node *np, const char *list_name,
EXPORT_SYMBOL(of_get_named_gpio_flags);
/**
+ * of_get_gpio_hog() - Get a GPIO hog descriptor, names and flags for GPIO API
+ * @np: device node to get GPIO from
+ * @name: GPIO line name
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
+ * @dflags: gpiod_flags - optional GPIO initialization flags
+ *
+ * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * value on the error condition.
+ */
+static struct gpio_desc *of_get_gpio_hog(struct device_node *np,
+ const char **name,
+ enum gpio_lookup_flags *lflags,
+ enum gpiod_flags *dflags)
+{
+ struct device_node *chip_np;
+ enum of_gpio_flags xlate_flags;
+ struct gpio_desc *desc;
+ struct gg_data gg_data = {
+ .flags = &xlate_flags,
+ };
+ u32 tmp;
+ int i, ret;
+
+ chip_np = np->parent;
+ if (!chip_np)
+ return ERR_PTR(-EINVAL);
+
+ xlate_flags = 0;
+ *lflags = 0;
+ *dflags = 0;
+
+ ret = of_property_read_u32(chip_np, "#gpio-cells", &tmp);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (tmp > MAX_PHANDLE_ARGS)
+ return ERR_PTR(-EINVAL);
+
+ gg_data.gpiospec.args_count = tmp;
+ gg_data.gpiospec.np = chip_np;
+ for (i = 0; i < tmp; i++) {
+ ret = of_property_read_u32_index(np, "gpios", i,
+ &gg_data.gpiospec.args[i]);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
+ gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
+ if (!gg_data.out_gpio) {
+ if (np->parent == np)
+ return ERR_PTR(-ENXIO);
+ else
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (xlate_flags & OF_GPIO_ACTIVE_LOW)
+ *lflags |= GPIO_ACTIVE_LOW;
+
+ if (of_property_read_bool(np, "input"))
+ *dflags |= GPIOD_IN;
+ else if (of_property_read_bool(np, "output-low"))
+ *dflags |= GPIOD_OUT_LOW;
+ else if (of_property_read_bool(np, "output-high"))
+ *dflags |= GPIOD_OUT_HIGH;
+ else {
+ pr_warn("GPIO line %d (%s): no hogging state specified, bailing out\n",
+ desc_to_gpio(gg_data.out_gpio), np->name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (name && of_property_read_string(np, "line-name", name))
+ *name = np->name;
+
+ desc = gg_data.out_gpio;
+
+ return desc;
+}
+
+/**
+ * of_gpiochip_scan_hogs - Scan gpio-controller and apply GPIO hog as requested
+ * @chip: gpio chip to act on
+ *
+ * This is only used by of_gpiochip_add to request/set GPIO initial
+ * configuration.
+ */
+static void of_gpiochip_scan_hogs(struct gpio_chip *chip)
+{
+ struct gpio_desc *desc = NULL;
+ struct device_node *np;
+ const char *name;
+ enum gpio_lookup_flags lflags;
+ enum gpiod_flags dflags;
+
+ for_each_child_of_node(chip->of_node, np) {
+ if (!of_property_read_bool(np, "gpio-hog"))
+ continue;
+
+ desc = of_get_gpio_hog(np, &name, &lflags, &dflags);
+ if (IS_ERR(desc))
+ continue;
+
+ if (gpiod_hog(desc, name, lflags, dflags))
+ continue;
+ }
+}
+
+/**
* of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
* @gc: pointer to the gpio_chip structure
* @np: device node of the GPIO chip
@@ -326,6 +435,8 @@ void of_gpiochip_add(struct gpio_chip *chip)
of_gpiochip_add_pin_range(chip);
of_node_get(chip->of_node);
+
+ of_gpiochip_scan_hogs(chip);
}
void of_gpiochip_remove(struct gpio_chip *chip)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1ca9295..59eaa23 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -315,6 +315,7 @@ EXPORT_SYMBOL_GPL(gpiochip_add);
/* Forward-declaration */
static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
+static void gpiochip_free_hogs(struct gpio_chip *chip);
/**
* gpiochip_remove() - unregister a gpio_chip
@@ -333,6 +334,7 @@ void gpiochip_remove(struct gpio_chip *chip)
acpi_gpiochip_remove(chip);
gpiochip_remove_pin_ranges(chip);
+ gpiochip_free_hogs(chip);
of_gpiochip_remove(chip);
spin_lock_irqsave(&gpio_lock, flags);
@@ -866,6 +868,7 @@ static bool __gpiod_free(struct gpio_desc *desc)
clear_bit(FLAG_REQUESTED, &desc->flags);
clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
+ clear_bit(FLAG_IS_HOGGED, &desc->flags);
ret = true;
}
@@ -1659,19 +1662,18 @@ static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
unsigned int idx,
enum gpio_lookup_flags *flags)
{
- static const char * const suffixes[] = { "gpios", "gpio" };
char prop_name[32]; /* 32 is max size of property name */
enum of_gpio_flags of_flags;
struct gpio_desc *desc;
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(suffixes); i++) {
+ for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id)
snprintf(prop_name, sizeof(prop_name), "%s-%s", con_id,
- suffixes[i]);
+ gpio_suffixes[i]);
else
snprintf(prop_name, sizeof(prop_name), "%s",
- suffixes[i]);
+ gpio_suffixes[i]);
desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx,
&of_flags);
@@ -1692,7 +1694,6 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
unsigned int idx,
enum gpio_lookup_flags *flags)
{
- static const char * const suffixes[] = { "gpios", "gpio" };
struct acpi_device *adev = ACPI_COMPANION(dev);
struct acpi_gpio_info info;
struct gpio_desc *desc;
@@ -1700,13 +1701,13 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
int i;
/* Try first from _DSD */
- for (i = 0; i < ARRAY_SIZE(suffixes); i++) {
+ for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id && strcmp(con_id, "gpios")) {
snprintf(propname, sizeof(propname), "%s-%s",
- con_id, suffixes[i]);
+ con_id, gpio_suffixes[i]);
} else {
snprintf(propname, sizeof(propname), "%s",
- suffixes[i]);
+ gpio_suffixes[i]);
}
desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
@@ -1805,6 +1806,70 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
return desc;
}
+static int dt_gpio_count(struct device *dev, const char *con_id)
+{
+ int ret;
+ char propname[32];
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+ if (con_id)
+ snprintf(propname, sizeof(propname), "%s-%s",
+ con_id, gpio_suffixes[i]);
+ else
+ snprintf(propname, sizeof(propname), "%s",
+ gpio_suffixes[i]);
+
+ ret = of_gpio_named_count(dev->of_node, propname);
+ if (ret >= 0)
+ break;
+ }
+ return ret;
+}
+
+static int platform_gpio_count(struct device *dev, const char *con_id)
+{
+ struct gpiod_lookup_table *table;
+ struct gpiod_lookup *p;
+ unsigned int count = 0;
+
+ table = gpiod_find_lookup_table(dev);
+ if (!table)
+ return -ENOENT;
+
+ for (p = &table->table[0]; p->chip_label; p++) {
+ if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) ||
+ (!con_id && !p->con_id))
+ count++;
+ }
+ if (!count)
+ return -ENOENT;
+
+ return count;
+}
+
+/**
+ * gpiod_count - return the number of GPIOs associated with a device / function
+ * or -ENOENT if no GPIO has been assigned to the requested function
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ */
+int gpiod_count(struct device *dev, const char *con_id)
+{
+ int count = -ENOENT;
+
+ if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+ count = dt_gpio_count(dev, con_id);
+ else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
+ count = acpi_gpio_count(dev, con_id);
+
+ if (count < 0)
+ count = platform_gpio_count(dev, con_id);
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(gpiod_count);
+
/**
* gpiod_get - obtain a GPIO for a given GPIO function
* @dev: GPIO consumer, can be NULL for system-global GPIOs
@@ -1840,6 +1905,47 @@ struct gpio_desc *__must_check __gpiod_get_optional(struct device *dev,
}
EXPORT_SYMBOL_GPL(__gpiod_get_optional);
+
+/**
+ * gpiod_configure_flags - helper function to configure a given GPIO
+ * @desc: gpio whose value will be assigned
+ * @con_id: function within the GPIO consumer
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
+ * @dflags: gpiod_flags - optional GPIO initialization flags
+ *
+ * Return 0 on success, -ENOENT if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occurred while trying to acquire the GPIO.
+ */
+static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
+ unsigned long lflags, enum gpiod_flags dflags)
+{
+ int status;
+
+ if (lflags & GPIO_ACTIVE_LOW)
+ set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+ if (lflags & GPIO_OPEN_DRAIN)
+ set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+ if (lflags & GPIO_OPEN_SOURCE)
+ set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+
+ /* No particular flag request, return here... */
+ if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
+ pr_debug("no flags found for %s\n", con_id);
+ return 0;
+ }
+
+ /* Process flags */
+ if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
+ status = gpiod_direction_output(desc,
+ dflags & GPIOD_FLAGS_BIT_DIR_VAL);
+ else
+ status = gpiod_direction_input(desc);
+
+ return status;
+}
+
/**
* gpiod_get_index - obtain a GPIO from a multi-index GPIO function
* @dev: GPIO consumer, can be NULL for system-global GPIOs
@@ -1865,13 +1971,15 @@ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
- /* Using device tree? */
- if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) {
- dev_dbg(dev, "using device tree for GPIO lookup\n");
- desc = of_find_gpio(dev, con_id, idx, &lookupflags);
- } else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev)) {
- dev_dbg(dev, "using ACPI for GPIO lookup\n");
- desc = acpi_find_gpio(dev, con_id, idx, &lookupflags);
+ if (dev) {
+ /* Using device tree? */
+ if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+ dev_dbg(dev, "using device tree for GPIO lookup\n");
+ desc = of_find_gpio(dev, con_id, idx, &lookupflags);
+ } else if (ACPI_COMPANION(dev)) {
+ dev_dbg(dev, "using ACPI for GPIO lookup\n");
+ desc = acpi_find_gpio(dev, con_id, idx, &lookupflags);
+ }
}
/*
@@ -1889,28 +1997,10 @@ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
}
status = gpiod_request(desc, con_id);
-
if (status < 0)
return ERR_PTR(status);
- if (lookupflags & GPIO_ACTIVE_LOW)
- set_bit(FLAG_ACTIVE_LOW, &desc->flags);
- if (lookupflags & GPIO_OPEN_DRAIN)
- set_bit(FLAG_OPEN_DRAIN, &desc->flags);
- if (lookupflags & GPIO_OPEN_SOURCE)
- set_bit(FLAG_OPEN_SOURCE, &desc->flags);
-
- /* No particular flag request, return here... */
- if (!(flags & GPIOD_FLAGS_BIT_DIR_SET))
- return desc;
-
- /* Process flags */
- if (flags & GPIOD_FLAGS_BIT_DIR_OUT)
- status = gpiod_direction_output(desc,
- flags & GPIOD_FLAGS_BIT_DIR_VAL);
- else
- status = gpiod_direction_input(desc);
-
+ status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
if (status < 0) {
dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
gpiod_put(desc);
@@ -2006,6 +2096,132 @@ struct gpio_desc *__must_check __gpiod_get_index_optional(struct device *dev,
EXPORT_SYMBOL_GPL(__gpiod_get_index_optional);
/**
+ * gpiod_hog - Hog the specified GPIO desc given the provided flags
+ * @desc: gpio whose value will be assigned
+ * @name: gpio line name
+ * @lflags: gpio_lookup_flags - returned from of_find_gpio() or
+ * of_get_gpio_hog()
+ * @dflags: gpiod_flags - optional GPIO initialization flags
+ */
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+ unsigned long lflags, enum gpiod_flags dflags)
+{
+ struct gpio_chip *chip;
+ struct gpio_desc *local_desc;
+ int hwnum;
+ int status;
+
+ chip = gpiod_to_chip(desc);
+ hwnum = gpio_chip_hwgpio(desc);
+
+ local_desc = gpiochip_request_own_desc(chip, hwnum, name);
+ if (IS_ERR(local_desc)) {
+ pr_debug("requesting own GPIO %s failed\n", name);
+ return PTR_ERR(local_desc);
+ }
+
+ status = gpiod_configure_flags(desc, name, lflags, dflags);
+ if (status < 0) {
+ pr_debug("setup of GPIO %s failed\n", name);
+ gpiochip_free_own_desc(desc);
+ return status;
+ }
+
+ /* Mark GPIO as hogged so it can be identified and removed later */
+ set_bit(FLAG_IS_HOGGED, &desc->flags);
+
+ pr_info("GPIO line %d (%s) hogged as %s%s\n",
+ desc_to_gpio(desc), name,
+ (dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
+ (dflags&GPIOD_FLAGS_BIT_DIR_OUT) ?
+ (dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":"");
+
+ return 0;
+}
+
+/**
+ * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
+ * @chip: gpio chip to act on
+ *
+ * This is only used by of_gpiochip_remove to free hogged gpios
+ */
+static void gpiochip_free_hogs(struct gpio_chip *chip)
+{
+ int id;
+
+ for (id = 0; id < chip->ngpio; id++) {
+ if (test_bit(FLAG_IS_HOGGED, &chip->desc[id].flags))
+ gpiochip_free_own_desc(&chip->desc[id]);
+ }
+}
+
+/**
+ * gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * This function acquires all the GPIOs defined under a given function.
+ *
+ * Return a struct gpio_descs containing an array of descriptors, -ENOENT if
+ * no GPIO has been assigned to the requested function, or another IS_ERR()
+ * code if an error occurred while trying to acquire the GPIOs.
+ */
+struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+{
+ struct gpio_desc *desc;
+ struct gpio_descs *descs;
+ int count;
+
+ count = gpiod_count(dev, con_id);
+ if (count < 0)
+ return ERR_PTR(count);
+
+ descs = kzalloc(sizeof(*descs) + sizeof(descs->desc[0]) * count,
+ GFP_KERNEL);
+ if (!descs)
+ return ERR_PTR(-ENOMEM);
+
+ for (descs->ndescs = 0; descs->ndescs < count; ) {
+ desc = gpiod_get_index(dev, con_id, descs->ndescs, flags);
+ if (IS_ERR(desc)) {
+ gpiod_put_array(descs);
+ return ERR_CAST(desc);
+ }
+ descs->desc[descs->ndescs] = desc;
+ descs->ndescs++;
+ }
+ return descs;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array);
+
+/**
+ * gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO
+ * function
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * This is equivalent to gpiod_get_array(), except that when no GPIO was
+ * assigned to the requested function it will return NULL.
+ */
+struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+{
+ struct gpio_descs *descs;
+
+ descs = gpiod_get_array(dev, con_id, flags);
+ if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
+ return NULL;
+
+ return descs;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array_optional);
+
+/**
* gpiod_put - dispose of a GPIO descriptor
* @desc: GPIO descriptor to dispose of
*
@@ -2017,6 +2233,21 @@ void gpiod_put(struct gpio_desc *desc)
}
EXPORT_SYMBOL_GPL(gpiod_put);
+/**
+ * gpiod_put_array - dispose of multiple GPIO descriptors
+ * @descs: struct gpio_descs containing an array of descriptors
+ */
+void gpiod_put_array(struct gpio_descs *descs)
+{
+ unsigned int i;
+
+ for (i = 0; i < descs->ndescs; i++)
+ gpiod_put(descs->desc[i]);
+
+ kfree(descs);
+}
+EXPORT_SYMBOL_GPL(gpiod_put_array);
+
#ifdef CONFIG_DEBUG_FS
static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index ab892be..594b179 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -29,6 +29,9 @@ struct acpi_gpio_info {
bool active_low;
};
+/* gpio suffixes used for ACPI and device tree lookup */
+static const char * const gpio_suffixes[] = { "gpios", "gpio" };
+
#ifdef CONFIG_ACPI
void acpi_gpiochip_add(struct gpio_chip *chip);
void acpi_gpiochip_remove(struct gpio_chip *chip);
@@ -39,6 +42,8 @@ void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
const char *propname, int index,
struct acpi_gpio_info *info);
+
+int acpi_gpio_count(struct device *dev, const char *con_id);
#else
static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { }
@@ -55,6 +60,11 @@ acpi_get_gpiod_by_index(struct acpi_device *adev, const char *propname,
{
return ERR_PTR(-ENOSYS);
}
+
+static inline int acpi_gpio_count(struct device *dev, const char *con_id)
+{
+ return -ENODEV;
+}
#endif
struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
@@ -80,6 +90,7 @@ struct gpio_desc {
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
#define FLAG_SYSFS_DIR 10 /* show sysfs direction attribute */
+#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
#define ID_SHIFT 16 /* add new flags before this one */
@@ -91,6 +102,8 @@ struct gpio_desc {
int gpiod_request(struct gpio_desc *desc, const char *label);
void gpiod_free(struct gpio_desc *desc);
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+ unsigned long lflags, enum gpiod_flags dflags);
/*
* Return the GPIO number of the passed descriptor relative to its chip
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 90df4df..097d721 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -125,7 +125,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
device_for_each_child_node(dev, child) {
struct gpio_desc *desc;
- desc = devm_get_gpiod_from_child(dev, child);
+ desc = devm_get_gpiod_from_child(dev, NULL, child);
if (IS_ERR(desc)) {
error = PTR_ERR(desc);
if (error != -EPROBE_DEFER)
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d26af0a..15eb3f8 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -184,7 +184,7 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
struct gpio_led led = {};
const char *state = NULL;
- led.gpiod = devm_get_gpiod_from_child(dev, child);
+ led.gpiod = devm_get_gpiod_from_child(dev, NULL, child);
if (IS_ERR(led.gpiod)) {
fwnode_handle_put(child);
ret = PTR_ERR(led.gpiod);
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 383ade1..9bb0d11 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -5,7 +5,6 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/of.h>
-#include <linux/pinctrl/pinctrl.h>
#ifdef CONFIG_GPIOLIB
@@ -139,53 +138,6 @@ static inline void gpio_unexport(unsigned gpio)
gpiod_unexport(gpio_to_desc(gpio));
}
-#ifdef CONFIG_PINCTRL
-
-/**
- * struct gpio_pin_range - pin range controlled by a gpio chip
- * @head: list for maintaining set of pin ranges, used internally
- * @pctldev: pinctrl device which handles corresponding pins
- * @range: actual range of pins controlled by a gpio controller
- */
-
-struct gpio_pin_range {
- struct list_head node;
- struct pinctrl_dev *pctldev;
- struct pinctrl_gpio_range range;
-};
-
-int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
- unsigned int gpio_offset, unsigned int pin_offset,
- unsigned int npins);
-int gpiochip_add_pingroup_range(struct gpio_chip *chip,
- struct pinctrl_dev *pctldev,
- unsigned int gpio_offset, const char *pin_group);
-void gpiochip_remove_pin_ranges(struct gpio_chip *chip);
-
-#else
-
-static inline int
-gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
- unsigned int gpio_offset, unsigned int pin_offset,
- unsigned int npins)
-{
- return 0;
-}
-static inline int
-gpiochip_add_pingroup_range(struct gpio_chip *chip,
- struct pinctrl_dev *pctldev,
- unsigned int gpio_offset, const char *pin_group)
-{
- return 0;
-}
-
-static inline void
-gpiochip_remove_pin_ranges(struct gpio_chip *chip)
-{
-}
-
-#endif /* CONFIG_PINCTRL */
-
#else /* !CONFIG_GPIOLIB */
static inline bool gpio_is_valid(int number)
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 45afc2d..3a7c9ff 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -16,6 +16,15 @@ struct device;
*/
struct gpio_desc;
+/**
+ * Struct containing an array of descriptors that can be obtained using
+ * gpiod_get_array().
+ */
+struct gpio_descs {
+ unsigned int ndescs;
+ struct gpio_desc *desc[];
+};
+
#define GPIOD_FLAGS_BIT_DIR_SET BIT(0)
#define GPIOD_FLAGS_BIT_DIR_OUT BIT(1)
#define GPIOD_FLAGS_BIT_DIR_VAL BIT(2)
@@ -34,6 +43,9 @@ enum gpiod_flags {
#ifdef CONFIG_GPIOLIB
+/* Return the number of GPIOs associated with a device / function */
+int gpiod_count(struct device *dev, const char *con_id);
+
/* Acquire and dispose GPIOs */
struct gpio_desc *__must_check __gpiod_get(struct device *dev,
const char *con_id,
@@ -49,7 +61,14 @@ struct gpio_desc *__must_check __gpiod_get_index_optional(struct device *dev,
const char *con_id,
unsigned int index,
enum gpiod_flags flags);
+struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags);
+struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags);
void gpiod_put(struct gpio_desc *desc);
+void gpiod_put_array(struct gpio_descs *descs);
struct gpio_desc *__must_check __devm_gpiod_get(struct device *dev,
const char *con_id,
@@ -64,7 +83,14 @@ struct gpio_desc *__must_check __devm_gpiod_get_optional(struct device *dev,
struct gpio_desc *__must_check
__devm_gpiod_get_index_optional(struct device *dev, const char *con_id,
unsigned int index, enum gpiod_flags flags);
+struct gpio_descs *__must_check devm_gpiod_get_array(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags);
+struct gpio_descs *__must_check
+devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
+ enum gpiod_flags flags);
void devm_gpiod_put(struct device *dev, struct gpio_desc *desc);
+void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs);
int gpiod_get_direction(struct gpio_desc *desc);
int gpiod_direction_input(struct gpio_desc *desc);
@@ -110,9 +136,15 @@ struct fwnode_handle;
struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
const char *propname);
struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
+ const char *con_id,
struct fwnode_handle *child);
#else /* CONFIG_GPIOLIB */
+static inline int gpiod_count(struct device *dev, const char *con_id)
+{
+ return 0;
+}
+
static inline struct gpio_desc *__must_check __gpiod_get(struct device *dev,
const char *con_id,
enum gpiod_flags flags)
@@ -142,6 +174,20 @@ __gpiod_get_index_optional(struct device *dev, const char *con_id,
return ERR_PTR(-ENOSYS);
}
+static inline struct gpio_descs *__must_check
+gpiod_get_array(struct device *dev, const char *con_id,
+ enum gpiod_flags flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct gpio_descs *__must_check
+gpiod_get_array_optional(struct device *dev, const char *con_id,
+ enum gpiod_flags flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline void gpiod_put(struct gpio_desc *desc)
{
might_sleep();
@@ -150,6 +196,14 @@ static inline void gpiod_put(struct gpio_desc *desc)
WARN_ON(1);
}
+static inline void gpiod_put_array(struct gpio_descs *descs)
+{
+ might_sleep();
+
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
static inline struct gpio_desc *__must_check
__devm_gpiod_get(struct device *dev,
const char *con_id,
@@ -181,6 +235,20 @@ __devm_gpiod_get_index_optional(struct device *dev, const char *con_id,
return ERR_PTR(-ENOSYS);
}
+static inline struct gpio_descs *__must_check
+devm_gpiod_get_array(struct device *dev, const char *con_id,
+ enum gpiod_flags flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct gpio_descs *__must_check
+devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
+ enum gpiod_flags flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
{
might_sleep();
@@ -189,6 +257,15 @@ static inline void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
WARN_ON(1);
}
+static inline void devm_gpiod_put_array(struct device *dev,
+ struct gpio_descs *descs)
+{
+ might_sleep();
+
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
static inline int gpiod_get_direction(const struct gpio_desc *desc)
{
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index c497c62..f1b3659 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -6,6 +6,7 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
+#include <linux/pinctrl/pinctrl.h>
struct device;
struct gpio_desc;
@@ -173,6 +174,53 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
#endif /* CONFIG_GPIOLIB_IRQCHIP */
+#ifdef CONFIG_PINCTRL
+
+/**
+ * struct gpio_pin_range - pin range controlled by a gpio chip
+ * @head: list for maintaining set of pin ranges, used internally
+ * @pctldev: pinctrl device which handles corresponding pins
+ * @range: actual range of pins controlled by a gpio controller
+ */
+
+struct gpio_pin_range {
+ struct list_head node;
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_gpio_range range;
+};
+
+int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int pin_offset,
+ unsigned int npins);
+int gpiochip_add_pingroup_range(struct gpio_chip *chip,
+ struct pinctrl_dev *pctldev,
+ unsigned int gpio_offset, const char *pin_group);
+void gpiochip_remove_pin_ranges(struct gpio_chip *chip);
+
+#else
+
+static inline int
+gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int pin_offset,
+ unsigned int npins)
+{
+ return 0;
+}
+static inline int
+gpiochip_add_pingroup_range(struct gpio_chip *chip,
+ struct pinctrl_dev *pctldev,
+ unsigned int gpio_offset, const char *pin_group)
+{
+ return 0;
+}
+
+static inline void
+gpiochip_remove_pin_ranges(struct gpio_chip *chip)
+{
+}
+
+#endif /* CONFIG_PINCTRL */
+
struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
const char *label);
void gpiochip_free_own_desc(struct gpio_desc *desc);
OpenPOWER on IntegriCloud