summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Ujfalusi <peter.ujfalusi@nokia.com>2010-05-06 12:04:25 +0300
committerLiam Girdwood <lrg@slimlogic.co.uk>2010-05-06 14:58:29 +0100
commit2f005471e2e2f2c7fa5898153387d421f7d24ad6 (patch)
treee59f7fe007741488d7364cb7a1db4422fadd84b4
parent6f3991152f20933b77eff30413e893bf1a15e578 (diff)
downloadop-kernel-dev-2f005471e2e2f2c7fa5898153387d421f7d24ad6.zip
op-kernel-dev-2f005471e2e2f2c7fa5898153387d421f7d24ad6.tar.gz
ASoC: tlv320dac33: Use codec defaults for LOM/LOP and DAC power
Do not change the codec defaults for the following registers: 0x40, 0x41: Line output gains, do not use amplification 0x42: LOM/LOP Voltage hold, and selection 0x44: LOM inversion control It has been found, that the values configured to these registers can cause amplification, which can make the output of DAC33 distorted. The codec reset values are considered safe in all environmnts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-rw-r--r--sound/soc/codecs/tlv320dac33.c11
1 files changed, 0 insertions, 11 deletions
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 68b7ccb..ad5e263 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -303,21 +303,10 @@ static void dac33_init_chip(struct snd_soc_codec *codec)
/* C : (defaults) */
dac33_write(codec, DAC33_DAC_CTRL_C, 0x00);
- /* 64-65 : L&R DAC power control
- Line In -> OUT 1V/V Gain, DAC -> OUT 4V/V Gain*/
- dac33_write(codec, DAC33_LDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
- dac33_write(codec, DAC33_RDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
-
/* 73 : volume soft stepping control,
clock source = internal osc (?) */
dac33_write(codec, DAC33_ANA_VOL_SOFT_STEP_CTRL, DAC33_VOLCLKEN);
- /* 66 : LOP/LOM Modes */
- dac33_write(codec, DAC33_OUT_AMP_CM_CTRL, 0xff);
-
- /* 68 : LOM inverted from LOP */
- dac33_write(codec, DAC33_OUT_AMP_CTRL, (3<<2));
-
dac33_write(codec, DAC33_PWR_CTRL, DAC33_PDNALLB);
/* Restore only selected registers (gains mostly) */
OpenPOWER on IntegriCloud