Merge tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC mvebu platform changes from Olof Johansson:
 "This series contains changes for the Marvell EBU platforms (mvebu,
  orion, kirkwood, dove) that were not part of the first set of pull
  requests because of dependencies on the MMC tree, and being submitted
  a little late.

  Notable changes are:

   - More devices get moved out of board files into device tree
     descriptions.  The remaining devices listed in there have patches
     that will get sent for 3.10, after which we can remove a lot of the
     board files entirely.  We are doing the pinctrl and mmc drivers
     here, ethernet and PCI still remain.

   - SMP support for mvebu is improved with support for the local
     interrupt controller.

   - The Guruplug board file gets replaced with a DT description.

  Unfortunately, the dependency on the MMC tree turned out to be a much
  larger problem than expected, when the MMC maintainer rebased the
  patches in his tree that all of the patches in this branch are based
  on, which caused merge conflicts between the new and old versions of
  those patches.

  To work around the merge conflicts, this branch rebases all patches on
  top of the respective MMC patches that did get merged into 3.9.  The
  patches are all identical to the versions that were part of
  linux-next, but have a new commit date."

* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
  arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
  ARM: kirkwood: topkick: init mvsdio via DT
  ARM: kirkwood: nsa310: convert to pinctrl
  ARM: Kirkwood: topkick: Enable i2c bus.
  ARM: kirkwood: topkick: convert to pinctrl
  ARM: dove: convert serial DT nodes to clocks property
  arm: mvebu: Add SPI flash on Armada 370 DB board
  arm: mvebu: Add SPI flash on Armada XP-DB board
  arm: mvebu: Add SPI flash on Armada XP-GP board
  arm: mvebu: Add support for SPI controller in Armada 370/XP
  clocksource: update and move armada-370-xp-timer documentation to timer directory
  arm: mvebu: update DT to support local timers
  ARM: Dove: convert usb host controller to DT
  arm: mvebu: Enable USB controllers on Armada 370/XP boards
  arm: mvebu: Add support for USB host controllers in Armada 370/XP
  arm: mvebu: add button for OpenBlocks AX3-4
  ARM: Kirkwood: Convert NS2 to gpio-poweroff.
  ARM: Kirkwood: Convert NSA310 I2C to device tree
  ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
  ARM: Kirkwood: Convert NSA310 to DT based regulators.
  ...

44 files changed, 1314 insertions, 371 deletions

diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
index 6483011..3638112 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
+++ b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
@@ -1,10 +1,13 @@
-Marvell Armada 370 and Armada XP Global Timers
-----------------------------------------------
+Marvell Armada 370 and Armada XP Timers
+---------------------------------------
 
 Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
-- interrupts: Should contain the list of Global Timer interrupts
-- reg: Should contain the base address of the Global Timer registers
+- interrupts: Should contain the list of Global Timer interrupts and
+  then local timer interrupts
+- reg: Should contain location and length for timers register. First
+  pair for the Global Timer registers, second pair for the
+  local/private timers.
 - clocks: clock driving the timer hardware
 
 Optional properties:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e007134..9c62558 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
 	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
@@ -78,7 +79,9 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
+	armada-370-rd.dtb \
 	armada-xp-db.dtb \
+	armada-xp-gp.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 9b82fac..e34b280 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -59,5 +59,40 @@
 			phy = <&phy1>;
 			phy-mode = "rgmii-id";
 		};
+
+		mvsdio@d00d4000 {
+			pinctrl-0 = <&sdio_pins1>;
+			pinctrl-names = "default";
+			/*
+			 * This device is disabled by default, because
+			 * using the SD card connector requires
+			 * changing the default CON40 connector
+			 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+			 * different connector
+			 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+			 */
+			status = "disabled";
+			/* No CD or WP GPIOs */
+		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0010600 {
+			status = "okay";
+
+			spi-flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l25635e";
+				reg = <0>; /* Chip select 0 */
+				spi-max-frequency = <50000000>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 3b40713..dd0c57d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -52,5 +52,23 @@
 			phy = <&phy1>;
 			phy-mode = "rgmii-id";
 		};
+
+		mvsdio@d00d4000 {
+			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-names = "default";
+			status = "okay";
+			/*
+			 * No CD or WP GPIOs: SDIO interface used for
+			 * Wifi/Bluetooth chip
+			 */
+		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
new file mode 100644
index 0000000..f8e4855
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -0,0 +1,68 @@
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Reference Design";
+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+
+		mvsdio@d00d4000 {
+			pinctrl-0 = <&sdio_pins1>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 5b29225..6f1acc7 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -68,8 +68,9 @@
 
 		timer@d0020300 {
 			       compatible = "marvell,armada-370-xp-timer";
-			       reg = <0xd0020300 0x30>;
-			       interrupts = <37>, <38>, <39>, <40>;
+			       reg = <0xd0020300 0x30>,
+			       <0xd0021040 0x30>;
+			       interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			       clocks = <&coreclk 2>;
 		};
 
@@ -137,6 +138,50 @@
 			reg = <0xd0010300 0x20>;
 			interrupts = <50>;
 		};
+
+		mvsdio@d00d4000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0xd00d4000 0x200>;
+			interrupts = <54>;
+			clocks = <&gateclk 17>;
+			status = "disabled";
+		};
+
+		usb@d0050000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xd0050000 0x500>;
+			interrupts = <45>;
+			status = "disabled";
+		};
+
+		usb@d0051000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xd0051000 0x500>;
+			interrupts = <46>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0010600 {
+			compatible = "marvell,orion-spi";
+			reg = <0xd0010600 0x28>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@d0010680 {
+			compatible = "marvell,orion-spi";
+			reg = <0xd0010680 0x28>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 636cf7d..8188d13 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -47,6 +47,18 @@
 		pinctrl {
 			compatible = "marvell,mv88f6710-pinctrl";
 			reg = <0xd0018000 0x38>;
+
+			sdio_pins1: sdio-pins1 {
+			      marvell,pins = "mpp9",  "mpp11", "mpp12",
+					     "mpp13", "mpp14", "mpp15";
+			      marvell,function = "sd0";
+			};
+
+			sdio_pins2: sdio-pins2 {
+			      marvell,pins = "mpp47", "mpp48", "mpp49",
+					     "mpp50", "mpp51", "mpp52";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {
@@ -132,5 +144,14 @@
 				dmacap,memset;
 			};
 		};
+
+		usb@d0050000 {
+			clocks = <&coreclk 0>;
+		};
+
+		usb@d0051000 {
+			clocks = <&coreclk 0>;
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 8e53b25..e83505e 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -90,5 +90,36 @@
 			phy = <&phy3>;
 			phy-mode = "sgmii";
 		};
+
+		mvsdio@d00d4000 {
+			pinctrl-0 = <&sdio_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
+
+		usb@d0052000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0010600 {
+			status = "okay";
+
+			spi-flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p64";
+				reg = <0>; /* Chip select 0 */
+				spi-max-frequency = <20000000>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
new file mode 100644
index 0000000..1c8afe2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -0,0 +1,113 @@
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+
+		/*
+		 * 4 GB of plug-in RAM modules by default but only 3GB
+		 * are visible, the amount of memory available can be
+		 * changed by the bootloader according the size of the
+		 * module actually plugged
+		 */
+		reg = <0x00000000 0xC0000000>;
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012100 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012200 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012300 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <16>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <17>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <18>;
+			};
+
+			phy3: ethernet-phy@3 {
+				reg = <19>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0030000 {
+			status = "okay";
+			phy = <&phy2>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0034000 {
+			status = "okay";
+			phy = <&phy3>;
+			phy-mode = "rgmii-id";
+		};
+
+		spi0: spi@d0010600 {
+			status = "okay";
+
+			spi-flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "n25q128a13";
+				reg = <0>; /* Chip select 0 */
+				spi-max-frequency = <108000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index e041f42..f56c405 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -47,6 +47,12 @@
 		pinctrl {
 			compatible = "marvell,mv78230-pinctrl";
 			reg = <0xd0018000 0x38>;
+
+			sdio_pins: sdio-pins {
+				marvell,pins = "mpp30", "mpp31", "mpp32",
+					       "mpp33", "mpp34", "mpp35";
+				marvell,function = "sd0";
+			};
 		};
 
 		gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 9e23bd8..f8f2b78 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -48,6 +48,12 @@
 		pinctrl {
 			compatible = "marvell,mv78260-pinctrl";
 			reg = <0xd0018000 0x38>;
+
+			sdio_pins: sdio-pins {
+				marvell,pins = "mpp30", "mpp31", "mpp32",
+					       "mpp33", "mpp34", "mpp35";
+				marvell,function = "sd0";
+			};
 		};
 
 		gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 9659661..936c25d 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -63,6 +63,12 @@
 		pinctrl {
 			compatible = "marvell,mv78460-pinctrl";
 			reg = <0xd0018000 0x38>;
+
+			sdio_pins: sdio-pins {
+				marvell,pins = "mpp30", "mpp31", "mpp32",
+					       "mpp33", "mpp34", "mpp35";
+				marvell,function = "sd0";
+			};
 		};
 
 		gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index b42652f..3818a82 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -66,6 +66,18 @@
 			};
 		};
 
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "Init Button";
+				linux,code = <116>;
+				gpios = <&gpio1 28 0>;
+			};
+		};
+
 		mdio {
 			phy0: ethernet-phy@0 {
 				reg = <0>;
@@ -121,5 +133,11 @@
 			nr-ports = <2>;
 			status = "okay";
 		};
+		usb@d0050000 {
+			status = "okay";
+		};
+		usb@d0051000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 2e37ef1..1443949 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -30,7 +30,7 @@
 	};
 
 	mpic: interrupt-controller@d0020000 {
-	      reg = <0xd0020a00 0x1d0>,
+	      reg = <0xd0020a00 0x2d0>,
 		    <0xd0021070 0x58>;
 	};
 
@@ -134,5 +134,22 @@
 				dmacap,memset;
 			};
 		};
+
+		usb@d0050000 {
+			clocks = <&gateclk 18>;
+		};
+
+		usb@d0051000 {
+			clocks = <&gateclk 19>;
+		};
+
+		usb@d0052000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xd0052000 0x500>;
+			interrupts = <47>;
+			clocks = <&gateclk 20>;
+			status = "disabled";
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index cdee96f..7e3065a 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -17,12 +17,33 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_18>;
+		pinctrl-names = "default";
+
 		power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 0>;
+		};
+	};
 };
 
 &uart0 { status = "okay"; };
@@ -47,9 +68,14 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
+	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
 	pinctrl-names = "default";
 
+	pmx_gpio_1: pmx-gpio-1 {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_12: pmx-gpio-12 {
 		marvell,pins = "mpp12";
 		marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 740630f..67dbe20 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -55,7 +55,7 @@
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <7>;
-			clock-frequency = <166666667>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -64,7 +64,7 @@
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <8>;
-			clock-frequency = <166666667>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -73,7 +73,7 @@
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <9>;
-			clock-frequency = <166666667>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -82,7 +82,7 @@
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <10>;
-			clock-frequency = <166666667>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -156,6 +156,22 @@
 			status = "disabled";
 		};
 
+		ehci0: usb-host@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <24>;
+			clocks = <&gate_clk 0>;
+			status = "okay";
+		};
+
+		ehci1: usb-host@51000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x51000 0x1000>;
+			interrupts = <25>;
+			clocks = <&gate_clk 1>;
+			status = "okay";
+		};
+
 		sdio0: sdio@92000 {
 			compatible = "marvell,dove-sdhci";
 			reg = <0x92000 0x100>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 4ccea21..192cf76 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -5,6 +5,12 @@
 			compatible = "marvell,88f6282-pinctrl";
 			reg = <0x10000 0x20>;
 
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+							"mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
 			pmx_sata0: pmx-sata0 {
 				marvell,pins = "mpp5", "mpp21", "mpp23";
 				marvell,function = "sata0";
@@ -21,6 +27,12 @@
 				marvell,pins = "mpp8", "mpp9";
 				marvell,function = "twsi0";
 			};
+
+			pmx_twsi1: pmx-twsi1 {
+				marvell,pins = "mpp36", "mpp37";
+				marvell,function = "twsi1";
+			};
+
 			pmx_uart0: pmx-uart0 {
 				marvell,pins = "mpp10", "mpp11";
 				marvell,function = "uart0";
@@ -30,6 +42,11 @@
 				marvell,pins = "mpp13", "mpp14";
 				marvell,function = "uart1";
 			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
 		};
 
 		i2c@11100 {
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index f2d386c..ef2d8c7 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -74,6 +74,13 @@
 			status = "okay";
 			nr-ports = <1>;
 		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
new file mode 100644
index 0000000..9555a86
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+				      &pmx_led_wmode_r &pmx_led_wmode_g >;
+			pinctrl-names = "default";
+
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x00100000 0x00400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x00500000 0x1fb00000>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 1>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 1>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 1>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 262c654..662dfd8 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -20,12 +20,11 @@
 		pinctrl: pinctrl@10000 {
 
 			pinctrl-0 = < &pmx_nand &pmx_uart0
-				      &pmx_led_health &pmx_sdio
+				      &pmx_led_health
 				      &pmx_sata0 &pmx_sata1
 				      &pmx_led_user1o
 				      &pmx_led_user1g &pmx_led_user0o
 				      &pmx_led_user0g &pmx_led_misc
-				      &pmx_sdio_cd
 				    >;
 			pinctrl-names = "default";
 
@@ -133,6 +132,14 @@
 			status = "okay";
 
 		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 15 0>;
+			/* No WP GPIO */
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 77d21ab..e8e7ece 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -76,4 +76,10 @@
 			gpios = <&gpio0 12 0>;
 		};
 	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 0>;
+	};
+
 };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 5509f96..3a178cf 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -16,6 +16,105 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_led_esata_green
+				      &pmx_led_esata_red
+				      &pmx_led_usb_green
+				      &pmx_led_usb_red
+				      &pmx_usb_power_off
+				      &pmx_led_sys_green
+				      &pmx_led_sys_red
+				      &pmx_btn_reset
+				      &pmx_btn_copy
+				      &pmx_led_copy_green
+				      &pmx_led_copy_red
+				      &pmx_led_hdd_green
+				      &pmx_led_hdd_red
+				      &pmx_unknown
+				      &pmx_btn_power
+				      &pmx_pwr_off >;
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_red: pmx-led-usb-red {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_power_off: pmx-usb-power-off {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_unknown: pmx-unknown {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
 
 		serial@12000 {
 			clock-frequency = <200000000>;
@@ -29,6 +128,11 @@
 
 		i2c@11000 {
 			status = "okay";
+
+			adt7476: adt7476a@2e {
+				compatible = "adt7476";
+				reg = <0x2e>;
+			};
 		};
 
 		nand@3000000 {
@@ -141,4 +245,26 @@
 			gpios = <&gpio1 8 0>;
 		};
 	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 16 0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb0_power_off: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Off";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 49d3d74..ede7fe0d 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -75,6 +75,122 @@
 				reg = <0x30>;
 			};
 		};
+
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				&pmx_uart1 &pmx_twsi1
+				&pmx_dip_sw0 &pmx_dip_sw1
+				&pmx_dip_sw2 &pmx_dip_sw3
+				&pmx_gpio_0 &pmx_gpio_1
+				&pmx_gpio_2 &pmx_gpio_3
+				&pmx_gpio_4 &pmx_gpio_5
+				&pmx_gpio_6 &pmx_gpio_7
+				&pmx_led_red &pmx_led_green
+				&pmx_led_yellow >;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_sw0: pmx-dip-sw0 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_dip_sw1: pmx-dip-sw1 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_dip_sw2: pmx-dip-sw2 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_dip_sw3: pmx-dip-sw3 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_0: pmx-gpio-0 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_1: pmx-gpio-1 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_2: pmx-gpio-2 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_3: pmx-gpio-3 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_4: pmx-gpio-4 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_5: pmx-gpio-5 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_6: pmx-gpio-6 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_7: pmx-gpio-7 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_yellow: pmx-led-yellow {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index cd15452..842ff95 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6282.dtsi"
 
 / {
 	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
@@ -16,6 +17,96 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			/*
+			 * GPIO LED layout
+			 *
+			 *       /-SYS_LED(2)
+			 *       |
+			 *       |   /-DISK_LED
+			 *       |   |
+			 *       |   |   /-WLAN_LED(2)
+			 *       |   |   |
+			 * [SW] [*] [*] [*]
+			 */
+
+			/*
+			 * Switch positions
+			 *
+			 *     /-SW_LEFT(2)
+			 *     |
+			 *     |   /-SW_IDLE
+			 *     |   |
+			 *     |   |   /-SW_RIGHT
+			 *     |   |   |
+			 * PS [L] [I] [R] LEDS
+			 */
+			pinctrl-0 = < &pmx_led_disk_yellow
+				      &pmx_sata0_pwr_enable
+				      &pmx_led_sys_red
+				      &pmx_led_sys_blue
+				      &pmx_led_wifi_green
+				      &pmx_sw_left
+				      &pmx_sw_right
+				      &pmx_sw_idle
+				      &pmx_sw_left2
+				      &pmx_led_wifi_yellow
+				      &pmx_uart0
+				      &pmx_nand
+				      &pmx_twsi0 >;
+			pinctrl-names = "default";
+
+			pmx_led_disk_yellow: pmx-led-disk-yellow {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_blue: pmx-led-sys-blue {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_green: pmx-led-wifi-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left: pmx-sw-left {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_right: pmx-sw-right {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_idle: pmx-sw-idle {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left2: pmx-sw-left2 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
@@ -54,6 +145,17 @@
 			status = "okay";
 			nr-ports = <1>;
 		};
+
+		i2c@11000 {
+			status = "ok";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index d6ab442..2c738d9 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -193,5 +193,13 @@
 			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
+
+		mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 0b7ee92..3fe8dae 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,26 +1,24 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
-CONFIG_ATAGS=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -32,8 +30,9 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -57,7 +56,6 @@ CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_POLLDEV=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
@@ -68,10 +66,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
@@ -81,13 +76,11 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_NEW_LEDS=y
@@ -104,6 +97,7 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -112,24 +106,20 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
@@ -138,7 +128,6 @@ CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
@@ -147,5 +136,4 @@ CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index cbd91bc..2ec8119 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -14,16 +14,20 @@ CONFIG_MACH_ARMADA_XP=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
-# CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 # CONFIG_COMPACTION is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_INET=y
+CONFIG_BT=y
+CONFIG_BT_MRVL=y
+CONFIG_BT_MRVL_SDIO=y
+CONFIG_CFG80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
@@ -31,16 +35,34 @@ CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
+CONFIG_MWIFIEX=y
+CONFIG_MWIFIEX_SDIO=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_I2C=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_M25P80=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_MMC=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
 CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 603c5fd..36469d8 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -2,8 +2,12 @@ if ARCH_DOVE
 
 menu "Marvell Dove Implementations"
 
+config DOVE_LEGACY
+	bool
+
 config MACH_DOVE_DB
 	bool "Marvell DB-MV88AP510 Development Board"
+	select DOVE_LEGACY
 	select I2C_BOARDINFO
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -11,6 +15,7 @@ config MACH_DOVE_DB
 
 config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
+	select DOVE_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
@@ -19,6 +24,8 @@ config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
 	select MVEBU_CLK_CORE
 	select MVEBU_CLK_GATING
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 5e683ba..3f0a858 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,4 +1,6 @@
-obj-y				+= common.o addr-map.o irq.o mpp.o
+obj-y				+= common.o addr-map.o irq.o
+obj-$(CONFIG_DOVE_LEGACY)	+= mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
+obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
new file mode 100644
index 0000000..fbde1dd
--- /dev/null
+++ b/arch/arm/mach-dove/board-dt.c
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-dove/board-dt.c
+ *
+ * Marvell Dove 88AP510 System On Chip FDT Board
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
+#include <mach/pm.h>
+#include <plat/common.h>
+#include <plat/irq.h>
+#include "common.h"
+
+/*
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
+ */
+static void __init dove_legacy_clk_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+					 "marvell,dove-gating-clock");
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	dove_legacy_clk_init();
+}
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+	pr_info("Dove 88AP510 SoC\n");
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init(0);
+#endif
+	dove_setup_cpu_mbus();
+
+	/* Setup root of clk tree */
+	dove_of_clk_init();
+
+	/* Internal devices not ported to DT yet */
+	dove_ge00_init(&dove_dt_ge00_data);
+	dove_pcie_init(1, 1);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.init_time	= dove_timer_init,
+	.init_machine	= dove_dt_init,
+	.restart	= dove_restart,
+	.dt_compat	= dove_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index ea84c535..c6b3b2b 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -360,88 +360,3 @@ void dove_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
-
-#if defined(CONFIG_MACH_DOVE_DT)
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-					 "marvell,dove-gating-clock");
-	struct of_phandle_args clkspec;
-
-	clkspec.np = np;
-	clkspec.args_count = 1;
-
-	clkspec.args[0] = CLOCK_GATING_BIT_USB0;
-	orion_clkdev_add(NULL, "orion-ehci.0",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_USB1;
-	orion_clkdev_add(NULL, "orion-ehci.1",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_of_clk_init(void)
-{
-	mvebu_clocks_init();
-	dove_legacy_clk_init();
-}
-
-static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static void __init dove_dt_init(void)
-{
-	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
-		(dove_tclk + 499999) / 1000000);
-
-#ifdef CONFIG_CACHE_TAUROS2
-	tauros2_init(0);
-#endif
-	dove_setup_cpu_mbus();
-
-	/* Setup root of clk tree */
-	dove_of_clk_init();
-
-	/* Internal devices not ported to DT yet */
-	dove_rtc_init();
-
-	dove_ge00_init(&dove_dt_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_pcie_init(1, 1);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const dove_dt_board_compat[] = {
-	"marvell,dove",
-	NULL
-};
-
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= dove_timer_init,
-	.init_machine	= dove_dt_init,
-	.restart	= dove_restart,
-	.dt_compat	= dove_dt_board_compat,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f91cdff..7b6a64b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,13 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
+config MACH_GURUPLUG_DT
+	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell GuruPlug Reference Board (Flattened Device Tree).
+
 config MACH_DREAMPLUG_DT
 	bool "Marvell DreamPlug (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d665309..4cc4bee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
+obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
 obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 08248e2..0903242 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
@@ -26,10 +25,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
 };
 
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
 void __init dreamplug_init(void)
 {
 	/*
@@ -37,5 +32,4 @@ void __init dreamplug_init(void)
 	 */
 	kirkwood_ge00_init(&dreamplug_ge00_data);
 	kirkwood_ge01_init(&dreamplug_ge01_data);
-	kirkwood_sdio_init(&dreamplug_mvsdio_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 95cc04d..2e73e9d 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -55,10 +55,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add("0", "pcie",
 			 of_clk_get_from_provider(&clkspec));
 
-	clkspec.args[0] = CGC_BIT_USB0;
-	orion_clkdev_add(NULL, "orion-ehci.0",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CGC_BIT_PEX1;
 	orion_clkdev_add("1", "pcie",
 			 of_clk_get_from_provider(&clkspec));
@@ -66,11 +62,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	clkspec.args[0] = CGC_BIT_GE1;
 	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
 			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_SDIO;
-	orion_clkdev_add(NULL, "mvsdio",
-			 of_clk_get_from_provider(&clkspec));
-
 }
 
 static void __init kirkwood_of_clk_init(void)
@@ -107,6 +98,9 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("globalscale,dreamplug"))
 		dreamplug_init();
 
+	if (of_machine_is_compatible("globalscale,guruplug"))
+		guruplug_dt_init();
+
 	if (of_machine_is_compatible("dlink,dns-kirkwood"))
 		dnskw_init();
 
@@ -150,14 +144,12 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("usi,topkick"))
 		usi_topkick_init();
 
-	if (of_machine_is_compatible("zyxel,nsa310"))
-		nsa310_init();
-
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
+	"globalscale,guruplug",
 	"dlink,dns-320",
 	"dlink,dns-325",
 	"iom,iconnect",
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
new file mode 100644
index 0000000..0a0df45
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-guruplug.c
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-kirkwood/board-guruplug.c
+ *
+ * Marvell Guruplug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mvsdio_platform_data guruplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+void __init guruplug_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&guruplug_ge00_data);
+	kirkwood_ge01_init(&guruplug_ge01_data);
+	kirkwood_sdio_init(&guruplug_mvsdio_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 3264925..7d6dc66 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
@@ -23,11 +22,6 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
 };
 
-static struct mvsdio_platform_data mplcec4_mvsdio_data = {
-	.gpio_card_detect = 47,	/* MPP47 used as SD card detect */
-};
-
-
 void __init mplcec4_init(void)
 {
 	/*
@@ -35,7 +29,6 @@ void __init mplcec4_init(void)
 	 */
 	kirkwood_ge00_init(&mplcec4_ge00_data);
 	kirkwood_ge01_init(&mplcec4_ge01_data);
-	kirkwood_sdio_init(&mplcec4_mvsdio_data);
 	kirkwood_pcie_init(KW_PCIE0);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index f4632a8..f2ea3b7 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
 
@@ -23,13 +22,6 @@ static struct mv643xx_eth_platform_data ns2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-#define NS2_GPIO_POWER_OFF	31
-
-static void ns2_power_off(void)
-{
-	gpio_set_value(NS2_GPIO_POWER_OFF, 1);
-}
-
 void __init ns2_init(void)
 {
 	/*
@@ -39,10 +31,4 @@ void __init ns2_init(void)
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
 	kirkwood_ge00_init(&ns2_ge00_data);
-
-	if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = ns2_power_off;
-	else
-		pr_err("ns2: failed to configure power-off GPIO\n");
 }
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index 970174a..55ade93 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -10,79 +10,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
 #include <mach/kirkwood.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
-
-#define NSA310_GPIO_USB_POWER_OFF	21
-#define NSA310_GPIO_POWER_OFF		48
-
-static unsigned int nsa310_mpp_config[] __initdata = {
-	MPP12_GPIO, /* led esata green */
-	MPP13_GPIO, /* led esata red */
-	MPP15_GPIO, /* led usb green */
-	MPP16_GPIO, /* led usb red */
-	MPP21_GPIO, /* control usb power off */
-	MPP28_GPIO, /* led sys green */
-	MPP29_GPIO, /* led sys red */
-	MPP36_GPIO, /* key reset */
-	MPP37_GPIO, /* key copy */
-	MPP39_GPIO, /* led copy green */
-	MPP40_GPIO, /* led copy red */
-	MPP41_GPIO, /* led hdd green */
-	MPP42_GPIO, /* led hdd red */
-	MPP44_GPIO, /* ?? */
-	MPP46_GPIO, /* key power */
-	MPP48_GPIO, /* control power off */
-	0
-};
-
-static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-	{ I2C_BOARD_INFO("adt7476", 0x2e) },
-};
-
-static void nsa310_power_off(void)
-{
-	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-				       const char *label)
-{
-	int err;
-
-	err = gpio_request_one(gpio, flags, label);
-	if (err)
-		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-			gpio, label, err);
-
-	return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
-	int err;
-
-	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-				  "Power Off");
-	if (!err)
-		pm_power_off = nsa310_power_off;
-
-	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-			    "USB Power Off");
-}
-
-void __init nsa310_init(void)
-{
-	kirkwood_mpp_conf(nsa310_mpp_config);
-
-	nsa310_gpio_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-}
 
 static int __init nsa310_pci_init(void)
 {
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index 815fc64..b11d8fd 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -11,60 +11,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data openblocks_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int openblocks_a6_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP8_UART1_RTS,
-	MPP9_UART1_CTS,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,
-	MPP14_UART1_RXD,
-	MPP15_UART0_RTS,
-	MPP16_UART0_CTS,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_GPIO, /* DIP SW0 */
-	MPP21_GPIO, /* DIP SW1 */
-	MPP22_GPIO, /* DIP SW2 */
-	MPP23_GPIO, /* DIP SW3 */
-	MPP24_GPIO, /* GPIO 0 */
-	MPP25_GPIO, /* GPIO 1 */
-	MPP26_GPIO, /* GPIO 2 */
-	MPP27_GPIO, /* GPIO 3 */
-	MPP28_GPIO, /* GPIO 4 */
-	MPP29_GPIO, /* GPIO 5 */
-	MPP30_GPIO, /* GPIO 6 */
-	MPP31_GPIO, /* GPIO 7 */
-	MPP36_TW1_SDA,
-	MPP37_TW1_SCK,
-	MPP38_GPIO, /* INIT */
-	MPP39_GPIO, /* USB OC */
-	MPP41_GPIO, /* LED: Red */
-	MPP42_GPIO, /* LED: Green */
-	MPP43_GPIO, /* LED: Yellow */
-	0,
-};
-
 void __init openblocks_a6_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(openblocks_a6_mpp_config);
 	kirkwood_ge00_init(&openblocks_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 23d2dd1..1cc04ec 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -14,64 +14,16 @@
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data topkick_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static struct mvsdio_platform_data topkick_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-/*
- * GPIO LED layout
- *
- *       /-SYS_LED(2)
- *       |
- *       |   /-DISK_LED
- *       |   |
- *       |   |   /-WLAN_LED(2)
- *       |   |   |
- * [SW] [*] [*] [*]
- */
-
-/*
- * Switch positions
- *
- *     /-SW_LEFT
- *     |
- *     |   /-SW_IDLE
- *     |   |
- *     |   |   /-SW_RIGHT
- *     |   |   |
- * PS [L] [I] [R] LEDS
- */
-
-static unsigned int topkick_mpp_config[] __initdata = {
-	MPP21_GPIO,	/* DISK_LED           (low active) - yellow */
-	MPP36_GPIO,	/* SATA0 power enable (high active) */
-	MPP37_GPIO,	/* SYS_LED2           (low active) - red */
-	MPP38_GPIO,	/* SYS_LED            (low active) - blue */
-	MPP39_GPIO,	/* WLAN_LED           (low active) - green */
-	MPP43_GPIO,	/* SW_LEFT            (low active) */
-	MPP44_GPIO,     /* SW_RIGHT           (low active) */
-	MPP45_GPIO,	/* SW_IDLE            (low active) */
-	MPP46_GPIO,     /* SW_LEFT            (low active) */
-	MPP48_GPIO,	/* WLAN_LED2          (low active) - yellow */
-	0
-};
-
 void __init usi_topkick_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(topkick_mpp_config);
-
-
 	kirkwood_ge00_init(&topkick_ge00_data);
-	kirkwood_sdio_init(&topkick_mvsdio_data);
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index e956d02..5ed7056 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -60,6 +60,11 @@ void dreamplug_init(void);
 #else
 static inline void dreamplug_init(void) {};
 #endif
+#ifdef CONFIG_MACH_GURUPLUG_DT
+void guruplug_dt_init(void);
+#else
+static inline void guruplug_dt_init(void) {};
+#endif
 #ifdef CONFIG_MACH_TS219_DT
 void qnap_dt_ts219_init(void);
 #else
@@ -130,12 +135,6 @@ void ns2_init(void);
 static inline void ns2_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_NSA310_DT
-void nsa310_init(void);
-#else
-static inline void nsa310_init(void) {};
-#endif
-
 #ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
 void openblocks_a6_init(void);
 #else
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
index 8e3fb08..274ff58 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c
@@ -34,6 +34,7 @@
 #define ARMADA_370_XP_INT_CONTROL		(0x00)
 #define ARMADA_370_XP_INT_SET_ENABLE_OFFS	(0x30)
 #define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS	(0x34)
+#define ARMADA_370_XP_INT_SOURCE_CTL(irq)	(0x100 + irq*4)
 
 #define ARMADA_370_XP_CPU_INTACK_OFFS		(0x44)
 
@@ -41,28 +42,90 @@
 #define ARMADA_370_XP_IN_DRBEL_MSK_OFFS          (0xc)
 #define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS        (0x8)
 
+#define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
+
 #define ACTIVE_DOORBELLS			(8)
 
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+
 static void __iomem *per_cpu_int_base;
 static void __iomem *main_int_base;
 static struct irq_domain *armada_370_xp_mpic_domain;
 
+/*
+ * In SMP mode:
+ * For shared global interrupts, mask/unmask global enable bit
+ * For CPU interrtups, mask/unmask the calling CPU's bit
+ */
 static void armada_370_xp_irq_mask(struct irq_data *d)
 {
+#ifdef CONFIG_SMP
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+		writel(hwirq, main_int_base +
+				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
+	else
+		writel(hwirq, per_cpu_int_base +
+				ARMADA_370_XP_INT_SET_MASK_OFFS);
+#else
 	writel(irqd_to_hwirq(d),
 	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
+#endif
 }
 
 static void armada_370_xp_irq_unmask(struct irq_data *d)
 {
+#ifdef CONFIG_SMP
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+		writel(hwirq, main_int_base +
+				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+	else
+		writel(hwirq, per_cpu_int_base +
+				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+#else
 	writel(irqd_to_hwirq(d),
 	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+#endif
 }
 
 #ifdef CONFIG_SMP
 static int armada_xp_set_affinity(struct irq_data *d,
 				  const struct cpumask *mask_val, bool force)
 {
+	unsigned long reg;
+	unsigned long new_mask = 0;
+	unsigned long online_mask = 0;
+	unsigned long count = 0;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	int cpu;
+
+	for_each_cpu(cpu, mask_val) {
+		new_mask |= 1 << cpu_logical_map(cpu);
+		count++;
+	}
+
+	/*
+	 * Forbid mutlicore interrupt affinity
+	 * This is required since the MPIC HW doesn't limit
+	 * several CPUs from acknowledging the same interrupt.
+	 */
+	if (count > 1)
+		return -EINVAL;
+
+	for_each_cpu(cpu, cpu_online_mask)
+		online_mask |= 1 << cpu_logical_map(cpu);
+
+	raw_spin_lock(&irq_controller_lock);
+
+	reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
+	reg = (reg & (~online_mask)) | new_mask;
+	writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
+
+	raw_spin_unlock(&irq_controller_lock);
+
 	return 0;
 }
 #endif
@@ -82,10 +145,17 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 {
 	armada_370_xp_irq_mask(irq_get_irq_data(virq));
 	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
-
-	irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
-				 handle_level_irq);
 	irq_set_status_flags(virq, IRQ_LEVEL);
+
+	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+		irq_set_percpu_devid(virq);
+		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
+					handle_percpu_devid_irq);
+
+	} else {
+		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
+					handle_level_irq);
+	}
 	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
 
 	return 0;
@@ -155,6 +225,15 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 
 #ifdef CONFIG_SMP
 	armada_xp_mpic_smp_cpu_init();
+
+	/*
+	 * Set the default affinity from all CPUs to the boot cpu.
+	 * This is required since the MPIC doesn't limit several CPUs
+	 * from acknowledging the same interrupt.
+	 */
+	cpumask_clear(irq_default_affinity);
+	cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
+
 #endif
 
 	return 0;
@@ -173,7 +252,7 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
 		if (irqnr > 1022)
 			break;
 
-		if (irqnr >= 8) {
+		if (irqnr > 0) {
 			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
 					irqnr);
 			handle_IRQ(irqnr, regs);
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index a4605fd..47a6730 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -27,8 +27,10 @@
 #include <linux/of_address.h>
 #include <linux/irq.h>
 #include <linux/module.h>
-#include <asm/sched_clock.h>
 
+#include <asm/sched_clock.h>
+#include <asm/localtimer.h>
+#include <linux/percpu.h>
 /*
  * Timer block registers.
  */
@@ -49,6 +51,7 @@
 #define TIMER1_RELOAD_OFF	0x0018
 #define TIMER1_VAL_OFF		0x001c
 
+#define LCL_TIMER_EVENTS_STATUS	0x0028
 /* Global timers are connected to the coherency fabric clock, and the
    below divider reduces their incrementing frequency. */
 #define TIMER_DIVIDER_SHIFT     5
@@ -57,14 +60,17 @@
 /*
  * SoC-specific data.
  */
-static void __iomem *timer_base;
-static int timer_irq;
+static void __iomem *timer_base, *local_base;
+static unsigned int timer_clk;
+static bool timer25Mhz = true;
 
 /*
  * Number of timer ticks per jiffy.
  */
 static u32 ticks_per_jiffy;
 
+static struct clock_event_device __percpu **percpu_armada_370_xp_evt;
+
 static u32 notrace armada_370_xp_read_sched_clock(void)
 {
 	return ~readl(timer_base + TIMER0_VAL_OFF);
@@ -78,24 +84,23 @@ armada_370_xp_clkevt_next_event(unsigned long delta,
 				struct clock_event_device *dev)
 {
 	u32 u;
-
 	/*
 	 * Clear clockevent timer interrupt.
 	 */
-	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+	writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
 
 	/*
 	 * Setup new clockevent timer value.
 	 */
-	writel(delta, timer_base + TIMER1_VAL_OFF);
+	writel(delta, local_base + TIMER0_VAL_OFF);
 
 	/*
 	 * Enable the timer.
 	 */
-	u = readl(timer_base + TIMER_CTRL_OFF);
-	u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
-	     TIMER1_DIV(TIMER_DIVIDER_SHIFT));
-	writel(u, timer_base + TIMER_CTRL_OFF);
+	u = readl(local_base + TIMER_CTRL_OFF);
+	u = ((u & ~TIMER0_RELOAD_EN) | TIMER0_EN |
+	     TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+	writel(u, local_base + TIMER_CTRL_OFF);
 
 	return 0;
 }
@@ -107,37 +112,38 @@ armada_370_xp_clkevt_mode(enum clock_event_mode mode,
 	u32 u;
 
 	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+
 		/*
 		 * Setup timer to fire at 1/HZ intervals.
 		 */
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+		writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
+		writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
 
 		/*
 		 * Enable timer.
 		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
 
-		writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
-			TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
-		       timer_base + TIMER_CTRL_OFF);
+		u = readl(local_base + TIMER_CTRL_OFF);
+
+		writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+			TIMER0_DIV(TIMER_DIVIDER_SHIFT)),
+			local_base + TIMER_CTRL_OFF);
 	} else {
 		/*
 		 * Disable timer.
 		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+		u = readl(local_base + TIMER_CTRL_OFF);
+		writel(u & ~TIMER0_EN, local_base + TIMER_CTRL_OFF);
 
 		/*
 		 * ACK pending timer interrupt.
 		 */
-		writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
-
+		writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
 	}
 }
 
 static struct clock_event_device armada_370_xp_clkevt = {
-	.name		= "armada_370_xp_tick",
+	.name		= "armada_370_xp_per_cpu_tick",
 	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 300,
@@ -150,32 +156,78 @@ static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
 	/*
 	 * ACK timer interrupt and call event handler.
 	 */
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
 
-	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
-	armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+	writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }
 
-static struct irqaction armada_370_xp_timer_irq = {
-	.name		= "armada_370_xp_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= armada_370_xp_timer_interrupt
+/*
+ * Setup the local clock events for a CPU.
+ */
+static int __cpuinit armada_370_xp_timer_setup(struct clock_event_device *evt)
+{
+	u32 u;
+	int cpu = smp_processor_id();
+
+	/* Use existing clock_event for cpu 0 */
+	if (!smp_processor_id())
+		return 0;
+
+	u = readl(local_base + TIMER_CTRL_OFF);
+	if (timer25Mhz)
+		writel(u | TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+	else
+		writel(u & ~TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+
+	evt->name		= armada_370_xp_clkevt.name;
+	evt->irq		= armada_370_xp_clkevt.irq;
+	evt->features		= armada_370_xp_clkevt.features;
+	evt->shift		= armada_370_xp_clkevt.shift;
+	evt->rating		= armada_370_xp_clkevt.rating,
+	evt->set_next_event	= armada_370_xp_clkevt_next_event,
+	evt->set_mode		= armada_370_xp_clkevt_mode,
+	evt->cpumask		= cpumask_of(cpu);
+
+	*__this_cpu_ptr(percpu_armada_370_xp_evt) = evt;
+
+	clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe);
+	enable_percpu_irq(evt->irq, 0);
+
+	return 0;
+}
+
+static void  armada_370_xp_timer_stop(struct clock_event_device *evt)
+{
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	disable_percpu_irq(evt->irq);
+}
+
+static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
+	.setup	= armada_370_xp_timer_setup,
+	.stop	=  armada_370_xp_timer_stop,
 };
 
 void __init armada_370_xp_timer_init(void)
 {
 	u32 u;
 	struct device_node *np;
-	unsigned int timer_clk;
+	int res;
+
 	np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
 	timer_base = of_iomap(np, 0);
 	WARN_ON(!timer_base);
+	local_base = of_iomap(np, 1);
 
 	if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
 		/* The fixed 25MHz timer is available so let's use it */
+		u = readl(local_base + TIMER_CTRL_OFF);
+		writel(u | TIMER0_25MHZ,
+		       local_base + TIMER_CTRL_OFF);
 		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+		writel(u | TIMER0_25MHZ,
 		       timer_base + TIMER_CTRL_OFF);
 		timer_clk = 25000000;
 	} else {
@@ -183,15 +235,23 @@ void __init armada_370_xp_timer_init(void)
 		struct clk *clk = of_clk_get(np, 0);
 		WARN_ON(IS_ERR(clk));
 		rate =  clk_get_rate(clk);
+		u = readl(local_base + TIMER_CTRL_OFF);
+		writel(u & ~(TIMER0_25MHZ),
+		       local_base + TIMER_CTRL_OFF);
+
 		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+		writel(u & ~(TIMER0_25MHZ),
 		       timer_base + TIMER_CTRL_OFF);
+
 		timer_clk = rate / TIMER_DIVIDER;
+		timer25Mhz = false;
 	}
 
-	/* We use timer 0 as clocksource, and timer 1 for
-	   clockevents */
-	timer_irq = irq_of_parse_and_map(np, 1);
+	/*
+	 * We use timer 0 as clocksource, and private(local) timer 0
+	 * for clockevents
+	 */
+	armada_370_xp_clkevt.irq = irq_of_parse_and_map(np, 4);
 
 	ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
 
@@ -216,12 +276,26 @@ void __init armada_370_xp_timer_init(void)
 			      "armada_370_xp_clocksource",
 			      timer_clk, 300, 32, clocksource_mmio_readl_down);
 
-	/*
-	 * Setup clockevent timer (interrupt-driven).
-	 */
-	setup_irq(timer_irq, &armada_370_xp_timer_irq);
+	/* Register the clockevent on the private timer of CPU 0 */
 	armada_370_xp_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&armada_370_xp_clkevt,
 					timer_clk, 1, 0xfffffffe);
-}
 
+	percpu_armada_370_xp_evt = alloc_percpu(struct clock_event_device *);
+
+
+	/*
+	 * Setup clockevent timer (interrupt-driven).
+	 */
+	*__this_cpu_ptr(percpu_armada_370_xp_evt) = &armada_370_xp_clkevt;
+	res = request_percpu_irq(armada_370_xp_clkevt.irq,
+				armada_370_xp_timer_interrupt,
+				armada_370_xp_clkevt.name,
+				percpu_armada_370_xp_evt);
+	if (!res) {
+		enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
+#ifdef CONFIG_LOCAL_TIMERS
+		local_timer_register(&armada_370_xp_local_timer_ops);
+#endif
+	}
+}