summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2011-11-05 12:10:55 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2012-01-05 12:57:14 +0000
commitd1b860fbb2b0d25a5ccd8165ea4db2914b0820f5 (patch)
treeb65b0c6ea80f9a9d0146fbaab6306a3be53ca449
parentb219415c39053dbe70e88c361b5e943acd74546c (diff)
downloadop-kernel-dev-d1b860fbb2b0d25a5ccd8165ea4db2914b0820f5.zip
op-kernel-dev-d1b860fbb2b0d25a5ccd8165ea4db2914b0820f5.tar.gz
ARM: restart: ixp4xx: use new restart hook
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Krzysztof HaƂasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r--arch/arm/mach-ixp4xx/avila-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/common.c20
-rw-r--r--arch/arm/mach-ixp4xx/coyote-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c1
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/platform.h1
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/system.h21
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/omixp-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-setup.c1
16 files changed, 38 insertions, 21 deletions
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 37609a2..a7277ad 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
/*
@@ -190,6 +191,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index b86a005..04aa121 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -501,3 +501,23 @@ static void __init ixp4xx_clockevent_init(void)
clockevents_register_device(&clockevent_ixp4xx);
}
+
+void ixp4xx_restart(char mode, const char *cmd)
+{
+ if ( 1 && mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+
+ /* set the "key" register to enable access to
+ * "timer" and "enable" registers
+ */
+ *IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+ /* write 0 to the timer register for an immediate reset */
+ *IXP4XX_OSWT = 0;
+
+ *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+ }
+}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 81dfec3..a74f86c 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -117,6 +117,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -132,6 +133,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
.init_machine = coyote_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 8837fbc..67be177 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -286,4 +286,5 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 2887c35..6d58182 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -277,5 +277,6 @@ MACHINE_START(FSG, "Freecom FSG-3")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d69d1b0..7ecf9b2 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -104,5 +104,6 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index bf6678d..c0e3d69 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -504,4 +504,5 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index aa029fc..a23f893 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index e824c02..df9250b 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -125,6 +125,7 @@ extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_restart(char, const char *);
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 24337d9..72db2bb 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -8,9 +8,6 @@
* published by the Free Software Foundation.
*
*/
-
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/* ixp4xx does not implement the XScale PWRMODE register,
@@ -21,24 +18,6 @@ static inline void arch_idle(void)
#endif
}
-
static inline void arch_reset(char mode, const char *cmd)
{
- if ( 1 && mode == 's') {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
}
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f235f82..8a38b39 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -261,6 +261,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index de716fa..1010eb7b 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -321,4 +321,5 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ac81ccb..aa355c3 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -307,4 +307,5 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 3b6a81a..0940869 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -246,6 +246,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP")
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -259,6 +260,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -269,5 +271,6 @@ MACHINE_START(MIC256, "Omicron MIC256")
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 27e469e..9dec206 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -244,4 +244,5 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index b14144b..5ac0f0a 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -105,5 +105,6 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
OpenPOWER on IntegriCloud