summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRussell King <rmk@arm.linux.org.uk>2010-01-03 12:35:42 +0000
committerDavid S. Miller <davem@davemloft.net>2010-01-12 01:53:02 -0800
commitc3be57b6f35ef96a980ce84e59d6a5a8ca6184ad (patch)
tree5bf66bef205e19a93bd0878ef051e2d60e63381b
parentf75d4a238770d83d3a0475ce7f34e3fa37de161e (diff)
downloadop-kernel-dev-c3be57b6f35ef96a980ce84e59d6a5a8ca6184ad.zip
op-kernel-dev-c3be57b6f35ef96a980ce84e59d6a5a8ca6184ad.tar.gz
ide: Fix Promise UDMA33 IDE driver (pdc202xx_old)
On Sun, Jan 03, 2010 at 12:23:14AM +0000, Russell King wrote: > - with IDE > - locks the interrupt line, and makes the machine extremely painful - > about an hour to get to the point of being able to unload the > pdc202xx_old module. Having manually bisected kernel versions, I've narrowed it down to some change between 2.6.30 and 2.6.31. There's not much which has changed between the two kernels, but one change stands out like a sore thumb: +static int pdc202xx_test_irq(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long high_16 = pci_resource_start(dev, 4); + u8 sc1d = inb(high_16 + 0x1d); + + if (hwif->channel) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return ((sc1d & 0x50) == 0x40) ? 1 : 0; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return ((sc1d & 0x05) == 0x04) ? 1 : 0; + } +} Reading the (documented as a 32-bit) system control register when the interface is idle gives: 0x01da110c So, the byte at 0x1d is 0x11, which is documented as meaning that the primary and secondary FIFOs are empty. The code above, which is trying to see whether an IRQ is pending, checks for the IRQ bit to be one, and the FIFO bit to be zero - or in English, to be non-empty. Since during a BM-DMA read, the FIFOs will naturally be drained to the PCI bus, the chance of us getting to the interface before this happens are extremely small - and if we don't, it means we decide not to service the interrupt. Hence, the screaming interrupt problem with drivers/ide. Fix this by only indicating an interrupt is ready if both the interrupt and FIFO empty bits are at '1'. This bug only affects PDC20246/PDC20247 (Promise Ultra33) based cards, and has been tested on 2.6.31 and 2.6.33-rc2. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/ide/pdc202xx_old.c4
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 35161dd..e3bca38 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -100,13 +100,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif)
* bit 7: error, bit 6: interrupting,
* bit 5: FIFO full, bit 4: FIFO empty
*/
- return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+ return ((sc1d & 0x50) == 0x50) ? 1 : 0;
} else {
/*
* bit 3: error, bit 2: interrupting,
* bit 1: FIFO full, bit 0: FIFO empty
*/
- return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+ return ((sc1d & 0x05) == 0x05) ? 1 : 0;
}
}
OpenPOWER on IntegriCloud