Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)

76 files changed, 1 insertions, 8400 deletions

diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
deleted file mode 100644
index dc460f0..0000000
--- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
+++ /dev/null
@@ -1,61 +0,0 @@
-README on the ADC/Touchscreen Controller
-========================================
-
-The LH79524 and LH7A404 include a built-in Analog to Digital
-controller (ADC) that is used to process input from a touchscreen.
-The driver only implements a four-wire touch panel protocol.
-
-The touchscreen driver is maintenance free except for the pen-down or
-touch threshold.  Some resistive displays and board combinations may
-require tuning of this threshold.  The driver exposes some of its
-internal state in the sys filesystem.  If the kernel is configured
-with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
-directory
-
-  /sys/devices/platform/adc-lh7.0
-
-containing these files.
-
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 samples
-  -rw-r--r--    1 root     root         4096 Jan  1 00:00 threshold
-  -r--r--r--    1 root     root         4096 Jan  1 00:00 threshold_range
-
-The threshold is the current touch threshold.  It defaults to 750 on
-most targets.
-
-  # cat threshold
- 750
-
-The threshold_range contains the range of valid values for the
-threshold.  Values outside of this range will be silently ignored.
-
-  # cat threshold_range
-  0 1023
-
-To change the threshold, write a value to the threshold file.
-
-  # echo 500 > threshold
-  # cat threshold
-  500
-
-The samples file contains the most recently sampled values from the
-ADC.  There are 12.  Below are typical of the last sampled values when
-the pen has been released.  The first two and last two samples are for
-detecting whether or not the pen is down.  The third through sixth are
-X coordinate samples.  The seventh through tenth are Y coordinate
-samples.
-
-  # cat samples
-  1023 1023 0 0 0 0 530 529 530 529 1023 1023
-
-To determine a reasonable threshold, press on the touch panel with an
-appropriate stylus and read the values from samples.
-
-  # cat samples
-  1023 676 92 103 101 102 855 919 922 922 1023 679
-
-The first and eleventh samples are discarded.  Thus, the important
-values are the second and twelfth which are used to determine if the
-pen is down.  When both are below the threshold, the driver registers
-that the pen is down.  When either is above the threshold, it
-registers then pen is up.
diff --git a/Documentation/arm/Sharp-LH/CompactFlash b/Documentation/arm/Sharp-LH/CompactFlash
deleted file mode 100644
index 8616d87..0000000
--- a/Documentation/arm/Sharp-LH/CompactFlash
+++ /dev/null
@@ -1,32 +0,0 @@
-README on the Compact Flash for Card Engines
-============================================
-
-There are three challenges in supporting the CF interface of the Card
-Engines.  First, every IO operation must be followed with IO to
-another memory region.  Second, the slot is wired for one-to-one
-address mapping *and* it is wired for 16 bit access only.  Second, the
-interrupt request line from the CF device isn't wired.
-
-The IOBARRIER issue is covered in README.IOBARRIER.  This isn't an
-onerous problem.  Enough said here.
-
-The addressing issue is solved in the
-arch/arm/mach-lh7a40x/ide-lpd7a40x.c file with some awkward
-work-arounds.  We implement a special SELECT_DRIVE routine that is
-called before the IDE driver performs its own SELECT_DRIVE.  Our code
-recognizes that the SELECT register cannot be modified without also
-writing a command.  It send an IDLE_IMMEDIATE command on selecting a
-drive.  The function also prevents drive select to the slave drive
-since there can be only one.  The awkward part is that the IDE driver,
-even though we have a select procedure, also attempts to change the
-drive by writing directly the SELECT register.  This attempt is
-explicitly blocked by the OUTB function--not pretty, but effective.
-
-The lack of interrupts is a more serious problem.  Even though the CF
-card is fast when compared to a normal IDE device, we don't know that
-the CF is really flash.  A user could use one of the very small hard
-drives being shipped with a CF interface.  The IDE code includes a
-check for interfaces that lack an IRQ.  In these cases, submitting a
-command to the IDE controller is followed by a call to poll for
-completion.  If the device isn't immediately ready, it schedules a
-timer to poll again later.
diff --git a/Documentation/arm/Sharp-LH/IOBarrier b/Documentation/arm/Sharp-LH/IOBarrier
deleted file mode 100644
index 2e953e2..0000000
--- a/Documentation/arm/Sharp-LH/IOBarrier
+++ /dev/null
@@ -1,45 +0,0 @@
-README on the IOBARRIER for CardEngine IO
-=========================================
-
-Due to an unfortunate oversight when the Card Engines were designed,
-the signals that control access to some peripherals, most notably the
-SMC91C9111 ethernet controller, are not properly handled.
-
-The symptom is that some back to back IO with the peripheral returns
-unreliable data.  With the SMC chip, you'll see errors about the bank
-register being 'screwed'.
-
-The cause is that the AEN signal to the SMC chip does not transition
-for every memory access.  It is driven through the CPLD from the CS7
-line of the CPU's static memory controller which is optimized to
-eliminate unnecessary transitions.  Yet, the SMC requires a transition
-for every write access.  The Sharp website has more information about
-the effect this power-conserving feature has on peripheral
-interfacing.
-
-The solution is to follow every write access to the SMC chip with an
-access to another memory region that will force the CPU to release the
-chip select line.  It is important to guarantee that this access
-forces the CPU off-chip.  We map a page of SDRAM as if it were an
-uncacheable IO device and read from it after every SMC IO write
-operation.
-
-  SMC IO
-  BARRIER IO
-
-Only this sequence is important.  It does not matter that there is no
-BARRIER IO before the access to the SMC chip because the AEN latch
-only needs occurs after the SMC IO write cycle.  The routines that
-implement this work-around make an additional concession which is to
-disable interrupts during the IO sequence.  Other hardware devices
-(the LogicPD CPLD) have registers in the same physical memory
-region as the SMC chip.  An interrupt might allow an access to one of
-those registers while SMC IO is being performed.
-
-You might be tempted to think that we have to access another device
-attached to the static memory controller, but the empirical evidence
-indicates that this is not so.  Mapping 0x00000000 (flash) and
-0xc0000000 (SDRAM) appear to have the same effect.  Using SDRAM seems
-to be faster.  Choosing to access an undecoded memory region is not
-desirable as there is no way to know how that chip select will be used
-in the future.
diff --git a/Documentation/arm/Sharp-LH/KEV7A400 b/Documentation/arm/Sharp-LH/KEV7A400
deleted file mode 100644
index be32b14..0000000
--- a/Documentation/arm/Sharp-LH/KEV7A400
+++ /dev/null
@@ -1,8 +0,0 @@
-README on Implementing Linux for Sharp's KEV7a400
-=================================================
-
-This product has been discontinued by Sharp.  For the time being, the
-partially implemented code remains in the kernel.  At some point in
-the future, either the code will be finished or it will be removed
-completely.  This depends primarily on how many of the development
-boards are in the field.
diff --git a/Documentation/arm/Sharp-LH/LCDPanels b/Documentation/arm/Sharp-LH/LCDPanels
deleted file mode 100644
index fb1b21c..0000000
--- a/Documentation/arm/Sharp-LH/LCDPanels
+++ /dev/null
@@ -1,59 +0,0 @@
-README on the LCD Panels
-========================
-
-Configuration options for several LCD panels, available from Logic PD,
-are included in the kernel source.  This README will help you
-understand the configuration data and give you some guidance for
-adding support for other panels if you wish.
-
-
-lcd-panels.h
-------------
-
-There is no way, at present, to detect which panel is attached to the
-system at runtime.  Thus the kernel configuration is static.  The file
-arch/arm/mach-ld7a40x/lcd-panels.h (or similar) defines all of the
-panel specific parameters.
-
-It should be possible for this data to be shared among several device
-families.  The current layout may be insufficiently general, but it is
-amenable to improvement.
-
-
-PIXEL_CLOCK
------------
-
-The panel data sheets will give a range of acceptable pixel clocks.
-The fundamental LCDCLK input frequency is divided down by a PCD
-constant in field '.tim2'.  It may happen that it is impossible to set
-the pixel clock within this range.  A clock which is too slow will
-tend to flicker.  For the highest quality image, set the clock as high
-as possible.
-
-
-MARGINS
--------
-
-These values may be difficult to glean from the panel data sheet.  In
-the case of the Sharp panels, the upper margin is explicitly called
-out as a specific number of lines from the top of the frame.  The
-other values may not matter as much as the panels tend to
-automatically center the image.
-
-
-Sync Sense
-----------
-
-The sense of the hsync and vsync pulses may be called out in the data
-sheet.  On one panel, the sense of these pulses determine the height
-of the visible region on the panel.  Most of the Sharp panels use
-negative sense sync pulses set by the TIM2_IHS and TIM2_IVS bits in
-'.tim2'.
-
-
-Pel Layout
-----------
-
-The Sharp color TFT panels are all configured for 16 bit direct color
-modes.  The amba-lcd driver sets the pel mode to 565 for 5 bits of
-each red and blue and 6 bits of green.
diff --git a/Documentation/arm/Sharp-LH/LPD7A400 b/Documentation/arm/Sharp-LH/LPD7A400
deleted file mode 100644
index 3275b45..0000000
--- a/Documentation/arm/Sharp-LH/LPD7A400
+++ /dev/null
@@ -1,15 +0,0 @@
-README on Implementing Linux for the Logic PD LPD7A400-10
-=========================================================
-
-- CPLD memory mapping
-
-  The board designers chose to use high address lines for controlling
-  access to the CPLD registers.  It turns out to be a big waste
-  because we're using an MMU and must map IO space into virtual
-  memory.  The result is that we have to make a mapping for every
-  register.
-
-- Serial Console
-
-  It may be OK not to use the serial console option if the user passes
-  the console device name to the kernel.  This deserves some exploration.
diff --git a/Documentation/arm/Sharp-LH/LPD7A40X b/Documentation/arm/Sharp-LH/LPD7A40X
deleted file mode 100644
index 8c29a27..0000000
--- a/Documentation/arm/Sharp-LH/LPD7A40X
+++ /dev/null
@@ -1,16 +0,0 @@
-README on Implementing Linux for the Logic PD LPD7A40X-10
-=========================================================
-
-- CPLD memory mapping
-
-  The board designers chose to use high address lines for controlling
-  access to the CPLD registers.  It turns out to be a big waste
-  because we're using an MMU and must map IO space into virtual
-  memory.  The result is that we have to make a mapping for every
-  register.
-
-- Serial Console
-
-  It may be OK not to use the serial console option if the user passes
-  the console device name to the kernel.  This deserves some exploration.
-
diff --git a/Documentation/arm/Sharp-LH/SDRAM b/Documentation/arm/Sharp-LH/SDRAM
deleted file mode 100644
index 93ddc23..0000000
--- a/Documentation/arm/Sharp-LH/SDRAM
+++ /dev/null
@@ -1,51 +0,0 @@
-README on the SDRAM Controller for the LH7a40X
-==============================================
-
-The standard configuration for the SDRAM controller generates a sparse
-memory array.  The precise layout is determined by the SDRAM chips.  A
-default kernel configuration assembles the discontiguous memory
-regions into separate memory nodes via the NUMA (Non-Uniform Memory
-Architecture) facilities.  In this default configuration, the kernel
-is forgiving about the precise layout.  As long as it is given an
-accurate picture of available memory by the bootloader the kernel will
-execute correctly.
-
-The SDRC supports a mode where some of the chip select lines are
-swapped in order to make SDRAM look like a synchronous ROM.  Setting
-this bit means that the RAM will present as a contiguous array.  Some
-programmers prefer this to the discontiguous layout.  Be aware that
-may be a penalty for this feature where some some configurations of
-memory are significantly reduced; i.e. 64MiB of RAM appears as only 32
-MiB.
-
-There are a couple of configuration options to override the default
-behavior.  When the SROMLL bit is set and memory appears as a
-contiguous array, there is no reason to support NUMA.
-CONFIG_LH7A40X_CONTIGMEM disables NUMA support.  When physical memory
-is discontiguous, the memory tables are organized such that there are
-two banks per nodes with a small gap between them.  This layout wastes
-some kernel memory for page tables representing non-existent memory.
-CONFIG_LH7A40X_ONE_BANK_PER_NODE optimizes the node tables such that
-there are no gaps.  These options control the low level organization
-of the memory management tables in ways that may prevent the kernel
-from booting or may cause the kernel to allocated excessively large
-page tables.  Be warned.  Only change these options if you know what
-you are doing.  The default behavior is a reasonable compromise that
-will suit all users.
-
---
-
-A typical 32MiB system with the default configuration options will
-find physical memory managed as follows.
-
-   node 0: 0xc0000000 4MiB
-           0xc1000000 4MiB
-   node 1: 0xc4000000 4MiB
-           0xc5000000 4MiB
-   node 2: 0xc8000000 4MiB
-           0xc9000000 4MiB
-   node 3: 0xcc000000 4MiB
-           0xcd000000 4MiB
-
-Setting CONFIG_LH7A40X_ONE_BANK_PER_NODE will put each bank into a
-separate node.
diff --git a/Documentation/arm/Sharp-LH/VectoredInterruptController b/Documentation/arm/Sharp-LH/VectoredInterruptController
deleted file mode 100644
index 23047e9..0000000
--- a/Documentation/arm/Sharp-LH/VectoredInterruptController
+++ /dev/null
@@ -1,80 +0,0 @@
-README on the Vectored Interrupt Controller of the LH7A404
-==========================================================
-
-The 404 revision of the LH7A40X series comes with two vectored
-interrupts controllers.  While the kernel does use some of the
-features of these devices, it is far from the purpose for which they
-were designed.
-
-When this README was written, the implementation of the VICs was in
-flux.  It is possible that some details, especially with priorities,
-will change.
-
-The VIC support code is inspired by routines written by Sharp.
-
-
-Priority Control
-----------------
-
-The significant reason for using the VIC's vectoring is to control
-interrupt priorities.  There are two tables in
-arch/arm/mach-lh7a40x/irq-lh7a404.c that look something like this.
-
-  static unsigned char irq_pri_vic1[] = { IRQ_GPIO3INTR, };
-  static unsigned char irq_pri_vic2[] = {
-	IRQ_T3UI, IRQ_GPIO7INTR,
-	IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR, };
-
-The initialization code reads these tables and inserts a vector
-address and enable for each indicated IRQ.  Vectored interrupts have
-higher priority than non-vectored interrupts.  So, on VIC1,
-IRQ_GPIO3INTR will be served before any other non-FIQ interrupt.  Due
-to the way that the vectoring works, IRQ_T3UI is the next highest
-priority followed by the other vectored interrupts on VIC2.  After
-that, the non-vectored interrupts are scanned in VIC1 then in VIC2.
-
-
-ISR
----
-
-The interrupt service routine macro get_irqnr() in
-arch/arm/kernel/entry-armv.S scans the VICs for the next active
-interrupt.  The vectoring makes this code somewhat larger than it was
-before using vectoring (refer to the LH7A400 implementation).  In the
-case where an interrupt is vectored, the implementation will tend to
-be faster than the non-vectored version.  However, the worst-case path
-is longer.
-
-It is worth noting that at present, there is no need to read
-VIC2_VECTADDR because the register appears to be shared between the
-controllers.  The code is written such that if this changes, it ought
-to still work properly.
-
-
-Vector Addresses
-----------------
-
-The proper use of the vectoring hardware would jump to the ISR
-specified by the vectoring address.  Linux isn't structured to take
-advantage of this feature, though it might be possible to change
-things to support it.
-
-In this implementation, the vectoring address is used to speed the
-search for the active IRQ.  The address is coded such that the lowest
-6 bits store the IRQ number for vectored interrupts.  These numbers
-correspond to the bits in the interrupt status registers.  IRQ zero is
-the lowest interrupt bit in VIC1.  IRQ 32 is the lowest interrupt bit
-in VIC2.  Because zero is a valid IRQ number and because we cannot
-detect whether or not there is a valid vectoring address if that
-address is zero, the eigth bit (0x100) is set for vectored interrupts.
-The address for IRQ 0x18 (VIC2) is 0x118.  Only the ninth bit is set
-for the default handler on VIC1 and only the tenth bit is set for the
-default handler on VIC2.
-
-In other words.
-
-  0x000		- no active interrupt
-  0x1ii		- vectored interrupt 0xii
-  0x2xx		- unvectored interrupt on VIC1 (xx is don't care)
-  0x4xx		- unvectored interrupt on VIC2 (xx is don't care)
-
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 48a0628..e34bf02 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -227,15 +227,6 @@ choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
 
-config ARCH_AAEC2000
-	bool "Agilent AAEC-2000 based"
-	select CPU_ARM920T
-	select ARM_AMBA
-	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for systems based on the Agilent AAEC-2000
-
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
@@ -811,17 +802,6 @@ config ARCH_TCC_926
 	help
 	  Support for Telechips TCC ARM926-based systems.
 
-config ARCH_LH7A40X
-	bool "Sharp LH7A40X"
-	select CPU_ARM922T
-	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Say Y here for systems based on one of the Sharp LH7A40X
-	  System on a Chip processors.  These CPUs include an ARM922T
-	  core with a wide array of integrated devices for
-	  hand-held and low-power applications.
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
@@ -908,8 +888,6 @@ endchoice
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
-source "arch/arm/mach-aaec2000/Kconfig"
-
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcmring/Kconfig"
@@ -948,8 +926,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
-source "arch/arm/mach-lh7a40x/Kconfig"
-
 source "arch/arm/mach-loki/Kconfig"
 
 source "arch/arm/mach-lpc32xx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1e20c41..5c7114b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -131,7 +131,6 @@ endif
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
@@ -151,7 +150,6 @@ machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
 machine-$(CONFIG_ARCH_LOKI) 		:= loki
 machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
deleted file mode 100644
index 5a48f17..0000000
--- a/arch/arm/configs/lpd7a400_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_LH7A40X=y
-CONFIG_MACH_LPD7A400=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_LH7A40X=y
-CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
deleted file mode 100644
index 22d0631..0000000
--- a/arch/arm/configs/lpd7a404_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_LH7A40X=y
-CONFIG_MACH_LPD7A404=y
-CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM_MANUAL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_LH7A40X=y
-CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f1e5a9b..da8b52e 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -192,11 +192,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 /*
  * Memory map description
  */
-#ifdef CONFIG_ARCH_LH7A40X
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS 8
 
 struct membank {
 	unsigned long start;
diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig
deleted file mode 100644
index 5e4bef9..0000000
--- a/arch/arm/mach-aaec2000/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_AAEC2000
-
-menu "Agilent AAEC-2000 Implementations"
-
-config MACH_AAED2000
-	bool "Agilent AAED-2000 Development Platform"
-	select CPU_ARM920T
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
deleted file mode 100644
index 20ec838..0000000
--- a/arch/arm/mach-aaec2000/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support (must be linked before board specific support)
-obj-y += core.o
-
-# Specific board support
-obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot
deleted file mode 100644
index 8f5a8b7..0000000
--- a/arch/arm/mach-aaec2000/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-	zreladdr-y := 0xf0008000
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
deleted file mode 100644
index 0eb3e3e..0000000
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  linux/arch/arm/mach-aaec2000/aaed2000.c
- *
- *  Support for the Agilent AAED-2000 Development Platform.
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/aaed2000.h>
-
-#include "core.h"
-
-static void aaed2000_clcd_disable(struct clcd_fb *fb)
-{
-	AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
-}
-
-static void aaed2000_clcd_enable(struct clcd_fb *fb)
-{
-	AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
-}
-
-struct aaec2000_clcd_info clcd_info = {
-	.enable = aaed2000_clcd_enable,
-	.disable = aaed2000_clcd_disable,
-	.panel = {
-		.mode	= {
-			.name		= "Sharp",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39721,
-			.left_margin	= 20,
-			.right_margin	= 44,
-			.upper_margin	= 21,
-			.lower_margin	= 34,
-			.hsync_len	= 96,
-			.vsync_len	= 2,
-			.sync		= 0,
-			.vmode	= FB_VMODE_NONINTERLACED,
-		},
-		.width	= -1,
-		.height	= -1,
-		.tim2	= TIM2_IVS | TIM2_IHS,
-		.cntl	= CNTL_LCDTFT,
-		.bpp	= 16,
-	},
-};
-
-static void __init aaed2000_init_irq(void)
-{
-	aaec2000_init_irq();
-}
-
-static void __init aaed2000_init(void)
-{
-	aaec2000_set_clcd_plat_data(&clcd_info);
-}
-
-static struct map_desc aaed2000_io_desc[] __initdata = {
-	{
-		.virtual	= EXT_GPIO_VBASE,
-		.pfn            = __phys_to_pfn(EXT_GPIO_PBASE),
-		.length         = EXT_GPIO_LENGTH,
-		.type           = MT_DEVICE
-	},
-};
-
-static void __init aaed2000_map_io(void)
-{
-	aaec2000_map_io();
-	iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
-}
-
-MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
-	/* Maintainer: Nicolas Bellido Y Ortega */
-	.map_io		= aaed2000_map_io,
-	.init_irq	= aaed2000_init_irq,
-	.timer		= &aaec2000_timer,
-	.init_machine	= aaed2000_init,
-MACHINE_END
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
deleted file mode 100644
index f8465bd..0000000
--- a/arch/arm/mach-aaec2000/core.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- *  linux/arch/arm/mach-aaec2000/core.c
- *
- *  Code common to all AAEC-2000 machines
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/signal.h>
-#include <linux/clk.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/flash.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "core.h"
-
-/*
- * Common I/O mapping:
- *
- * Static virtual address mappings are as follow:
- *
- * 0xf8000000-0xf8001ffff: Devices connected to APB bus
- * 0xf8002000-0xf8003ffff: Devices connected to AHB bus
- *
- * Below 0xe8000000 is reserved for vm allocation.
- *
- * The machine specific code must provide the extra mapping beside the
- * default mapping provided here.
- */
-static struct map_desc standard_io_desc[] __initdata = {
-	{
-		.virtual	= VIO_APB_BASE,
-		.pfn		= __phys_to_pfn(PIO_APB_BASE),
-		.length		= IO_APB_LENGTH,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VIO_AHB_BASE,
-		.pfn		= __phys_to_pfn(PIO_AHB_BASE),
-		.length		= IO_AHB_LENGTH,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init aaec2000_map_io(void)
-{
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-}
-
-/*
- * Interrupt handling routines
- */
-static void aaec2000_int_ack(struct irq_data *d)
-{
-	IRQ_INTSR = 1 << d->irq;
-}
-
-static void aaec2000_int_mask(struct irq_data *d)
-{
-	IRQ_INTENC |= (1 << d->irq);
-}
-
-static void aaec2000_int_unmask(struct irq_data *d)
-{
-	IRQ_INTENS |= (1 << d->irq);
-}
-
-static struct irq_chip aaec2000_irq_chip = {
-	.irq_ack	= aaec2000_int_ack,
-	.irq_mask	= aaec2000_int_mask,
-	.irq_unmask	= aaec2000_int_unmask,
-};
-
-void __init aaec2000_init_irq(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_handler(i, handle_level_irq);
-		set_irq_chip(i, &aaec2000_irq_chip);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	/* Disable all interrupts */
-	IRQ_INTENC = 0xffffffff;
-
-	/* Clear any pending interrupts */
-	IRQ_INTSR = IRQ_INTSR;
-}
-
-/*
- * Time keeping
- */
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long aaec2000_gettimeoffset(void)
-{
-	unsigned long ticks_to_match, elapsed, usec;
-
-	/* Get ticks before next timer match */
-	ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
-
-	/* We need elapsed ticks since last match */
-	elapsed = LATCH - ticks_to_match;
-
-	/* Now, convert them to usec */
-	usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
-
-	return usec;
-}
-
-/* We enter here with IRQs enabled */
-static irqreturn_t
-aaec2000_timer_interrupt(int irq, void *dev_id)
-{
-	/* TODO: Check timer accuracy */
-	timer_tick();
-	TIMER1_CLEAR = 1;
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction aaec2000_timer_irq = {
-	.name		= "AAEC-2000 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= aaec2000_timer_interrupt,
-};
-
-static void __init aaec2000_timer_init(void)
-{
-	/* Disable timer 1 */
-	TIMER1_CTRL = 0;
-
-	/* We have somehow to generate a 100Hz clock.
-	 * We then use the 508KHz timer in periodic mode.
-	 */
-	TIMER1_LOAD = LATCH;
-	TIMER1_CLEAR = 1; /* Clear interrupt */
-
-	setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
-
-	TIMER1_CTRL = TIMER_CTRL_ENABLE |
-	                TIMER_CTRL_PERIODIC |
-	                TIMER_CTRL_CLKSEL_508K;
-}
-
-struct sys_timer aaec2000_timer = {
-	.init		= aaec2000_timer_init,
-	.offset		= aaec2000_gettimeoffset,
-};
-
-static struct clcd_panel mach_clcd_panel;
-
-static int aaec2000_clcd_setup(struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-
-	fb->panel = &mach_clcd_panel;
-
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
-			&dma, GFP_KERNEL);
-
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start = dma;
-	fb->fb.fix.smem_len = SZ_1M;
-
-	return 0;
-}
-
-static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-			fb->fb.screen_base,
-			fb->fb.fix.smem_start,
-			fb->fb.fix.smem_len);
-}
-
-static void aaec2000_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name	= "AAEC-2000",
-	.check	= clcdfb_check,
-	.decode	= clcdfb_decode,
-	.setup	= aaec2000_clcd_setup,
-	.mmap	= aaec2000_clcd_mmap,
-	.remove	= aaec2000_clcd_remove,
-};
-
-static struct amba_device clcd_device = {
-	.dev		= {
-		.init_name		= "mb:16",
-		.coherent_dma_mask	= ~0,
-		.platform_data		= &clcd_plat_data,
-	},
-	.res		= {
-		.start			= AAEC_CLCD_PHYS,
-		.end			= AAEC_CLCD_PHYS + SZ_4K - 1,
-		.flags			= IORESOURCE_MEM,
-	},
-	.irq		= { INT_LCD, NO_IRQ },
-	.periphid	= 0x41110,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&clcd_device,
-};
-
-void clk_disable(struct clk *clk)
-{
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
-}
-
-void clk_put(struct clk *clk)
-{
-}
-
-void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
-{
-	clcd_plat_data.enable = clcd->enable;
-	clcd_plat_data.disable = clcd->disable;
-	memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
-}
-
-static struct flash_platform_data aaec2000_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 4,
-};
-
-static struct resource aaec2000_flash_resource = {
-	.start		= AAEC_FLASH_BASE,
-	.end		= AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device aaec2000_flash_device = {
-	.name		= "armflash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &aaec2000_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &aaec2000_flash_resource,
-};
-
-static int __init aaec2000_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	platform_device_register(&aaec2000_flash_device);
-
-	return 0;
-};
-arch_initcall(aaec2000_init);
-
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
deleted file mode 100644
index 59501b5..0000000
--- a/arch/arm/mach-aaec2000/core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  linux/arch/arm/mach-aaec2000/core.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-struct sys_timer;
-
-extern struct sys_timer aaec2000_timer;
-extern void __init aaec2000_map_io(void);
-extern void __init aaec2000_init_irq(void);
-
-struct aaec2000_clcd_info {
-	struct clcd_panel panel;
-	void (*disable)(struct clcd_fb *);
-	void (*enable)(struct clcd_fb *);
-};
-
-extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
-
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
deleted file mode 100644
index bc729c4..0000000
--- a/arch/arm/mach-aaec2000/include/mach/aaec2000.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
- *
- *  AAEC-2000 registers definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAEC2000_H
-#define __ASM_ARCH_AAEC2000_H
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not this file
-#endif /* __ASM_ARCH_HARDWARE_H */
-
-/* Chip selects */
-#define AAEC_CS0	0x00000000
-#define AAEC_CS1	0x10000000
-#define AAEC_CS2	0x20000000
-#define AAEC_CS3	0x30000000
-
-/* Flash */
-#define AAEC_FLASH_BASE	AAEC_CS0
-#define AAEC_FLASH_SIZE	SZ_64M
-
-/* Interrupt controller */
-#define IRQ_BASE	__REG(0x80000500)
-#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
-#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
-#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
-#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
-
-/* UART 1 */
-#define UART1_BASE	__REG(0x80000600)
-#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
-#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
-#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
-#define UART1_CR	__REG(0x8000060c) /* Control Register */
-#define UART1_SR	__REG(0x80000610) /* Status Register */
-#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
-#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
-#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
-
-/* UART 2 */
-#define UART2_BASE	__REG(0x80000700)
-#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
-#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
-#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
-#define UART2_CR	__REG(0x8000070c) /* Control Register */
-#define UART2_SR	__REG(0x80000710) /* Status Register */
-#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
-#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
-#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
-
-/* UART 3 */
-#define UART3_BASE	__REG(0x80000800)
-#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
-#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
-#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
-#define UART3_CR	__REG(0x8000080c) /* Control Register */
-#define UART3_SR	__REG(0x80000810) /* Status Register */
-#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
-#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
-#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
-
-/* These are used in some places */
-#define _UART1_BASE __PREG(UART1_BASE)
-#define _UART2_BASE __PREG(UART2_BASE)
-#define _UART3_BASE __PREG(UART3_BASE)
-
-/* UART Registers Offsets */
-#define UART_DR		0x00
-#define UART_LCR	0x04
-#define UART_BRCR	0x08
-#define UART_CR		0x0c
-#define UART_SR		0x10
-#define UART_INT	0x14
-#define UART_INTM	0x18
-#define UART_INTRES	0x1c
-
-/* UART_LCR Bitmask */
-#define UART_LCR_BRK	(1 << 0) /* Send Break */
-#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
-#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
-#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
-#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
-#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
-#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
-#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
-#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
-
-/* UART_CR Bitmask */
-#define UART_CR_EN	(1 << 0) /* UART Enable */
-#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
-#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
-#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
-#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
-#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
-#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
-
-/* UART_SR Bitmask */
-#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
-#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
-#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
-#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
-#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
-#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
-#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
-#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
-
-/* UART_INT Bitmask */
-#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
-#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
-#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
-#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
-
-/* Timer 1 */
-#define TIMER1_BASE	__REG(0x80000c00)
-#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
-#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
-#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
-#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
-
-/* Timer 2 */
-#define TIMER2_BASE	__REG(0x80000d00)
-#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
-#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
-#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
-#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
-
-/* Timer 3 */
-#define TIMER3_BASE	__REG(0x80000e00)
-#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
-#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
-#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
-#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
-
-/* Timer Control register bits */
-#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
-#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
-#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
-#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
-#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
-
-/* Power and State Control */
-#define POWER_BASE	__REG(0x80000400)
-#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
-#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
-#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
-#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
-#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
-#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
-#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
-#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
-#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
-
-/* GPIO Registers */
-#define AAEC_GPIO_PHYS	0x80000e00
-
-#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
-#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
-#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
-#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
-#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
-#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
-#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
-#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
-#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
-#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
-#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
-#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
-#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
-#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
-#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
-#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
-#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
-#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
-#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
-#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
-#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
-#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
-#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
-#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
-#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
-#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
-#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
-#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
-#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
-#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
-#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
-#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
-#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
-#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
-
-#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
-#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
-#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
-#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
-
-/* LCD Controller */
-#define AAEC_CLCD_PHYS	0x80003000
-
-#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
deleted file mode 100644
index f821295..0000000
--- a/arch/arm/mach-aaec2000/include/mach/aaed2000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
- *
- *  AAED-2000 specific bits definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAED2000_H
-#define __ASM_ARCH_AAED2000_H
-
-/* External GPIOs. */
-
-#define EXT_GPIO_PBASE	AAEC_CS3
-#define EXT_GPIO_VBASE	0xf8100000
-#define EXT_GPIO_LENGTH	0x00001000
-
-#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
-#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
-
-#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
-#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
-
-#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
-
-#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
-#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
-#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
-#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
-#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
-#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
-#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
-#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
-
-
-#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
deleted file mode 100644
index bc7ad55..0000000
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
- *
- *  Debugging macro include header
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include "hardware.h"
-		.macro	addruart, rp, rv
-		mov	\rp, 0x00000800
-		orr	\rv, \rp, #io_p2v(0x80000000)	@ virtual
-		orr	\rp, \rp, #0x80000000		@ physical
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 7)
-		beq	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#if 0
-1001:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 5)
-		beq	1001b
-#endif
-		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
deleted file mode 100644
index c8fb344..0000000
--- a/arch/arm/mach-aaec2000/include/mach/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
- *
- *  Low-level IRQ helper for aaec-2000 based platforms
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <mach/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xf8000000
-		add	r4, r4, #0x00000500
-		mov	\base, r4
-		ldr	\irqstat, [\base, #0]
-		cmp	\irqstat, #0
-		bne	1001f
-		ldr	\irqnr, =NR_IRQS+1
-		b       1003f
-1001:		mov	\irqnr, #0
-1002:		ands	\tmp, \irqstat, #1
-		mov	\irqstat, \irqstat, LSR #1
-		add	\irqnr, \irqnr, #1
-		beq	1002b
-		sub	\irqnr, \irqnr, #1
-1003:
-		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
deleted file mode 100644
index 965a6f6..0000000
--- a/arch/arm/mach-aaec2000/include/mach/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/hardware.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE	0x80000000
-#define VIO_APB_BASE	0xf8000000
-#define IO_APB_LENGTH	0x2000
-#define PIO_AHB_BASE	0x80002000
-#define VIO_AHB_BASE	0xf8002000
-#define IO_AHB_LENGTH	0x2000
-
-#define VIO_BASE    VIO_APB_BASE
-#define PIO_BASE    PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x)   (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x)    io_p2v(x)
-#define __PREG(x)   io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
deleted file mode 100644
index ab4fe5d..0000000
--- a/arch/arm/mach-aaec2000/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/io.h
- *
- *  Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
deleted file mode 100644
index bf45c6d..0000000
--- a/arch/arm/mach-aaec2000/include/mach/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/irqs.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ	3  /* Media Changed Interrupt */
-#define INT_SC		4  /* Sound Codec Interrupt */
-#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
-#define INT_TICK	11 /* 64Hz Tick Interrupt */
-#define INT_UART1	12 /* UART1 Interrupt */
-#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD		14 /* LCD Interrupt */
-#define INT_SSI		15 /* SSI End of Transfer Interrupt */
-#define INT_UART3	16 /* UART3 Interrupt */
-#define INT_SCI		17 /* SCI Interrupt */
-#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC		19 /* MMC Interrupt */
-#define INT_USB		20 /* USB Interrupt */
-#define INT_DMA		21 /* DMA Interrupt */
-#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI		27 /* BMI Interrupt */
-
-#define NR_IRQS		(INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
deleted file mode 100644
index 4a10bf0..0000000
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/memory.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PLAT_PHYS_OFFSET	UL(0xf0000000)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
deleted file mode 100644
index fe08ca1..0000000
--- a/arch/arm/mach-aaec2000/include/mach/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/mach-aaed2000/include/mach/system.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
deleted file mode 100644
index 6c8edf4..0000000
--- a/arch/arm/mach-aaec2000/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/timex.h
- *
- *  AAEC-2000 Architecture timex specification
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
deleted file mode 100644
index 381ecad..0000000
--- a/arch/arm/mach-aaec2000/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/uncompress.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-        do {
-		serial_port = _UART3_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART1_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART2_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while ((UART(UART_SR) & UART_SR_TxFF))
-		barrier();
-
-	/* send the character out. */
-	UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
deleted file mode 100644
index a6299e8..0000000
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		0xd0000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
deleted file mode 100644
index 9be7466..0000000
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-if ARCH_LH7A40X
-
-menu "LH7A40X Implementations"
-
-config MACH_KEV7A400
-	bool "KEV7A400"
-	select ARCH_LH7A400
-	help
-	  Say Y here if you are using the Sharp KEV7A400 development
-	  board.  This hardware is discontinued, so I'd be very
-	  surprised if you wanted this option.
-
-config MACH_LPD7A400
-	bool "LPD7A400 Card Engine"
-	select ARCH_LH7A400
-#	select IDE_POLL
-#	select HAS_TOUCHSCREEN_ADS7843_LH7
-	help
-	  Say Y here if you are using Logic Product Development's
-	  LPD7A400 CardEngine.  For the time being, the LPD7A400 and
-	  LPD7A404 options are mutually exclusive.
-
-config MACH_LPD7A404
-	bool "LPD7A404 Card Engine"
-	select ARCH_LH7A404
-#	select IDE_POLL
-#	select HAS_TOUCHSCREEN_ADC_LH7
-	help
-	  Say Y here if you are using Logic Product Development's
-	  LPD7A404 CardEngine. For the time being, the LPD7A400 and
-	  LPD7A404 options are mutually exclusive.
-
-config ARCH_LH7A400
-	bool
-
-config ARCH_LH7A404
-	bool
-
-config LPD7A40X_CPLD_SSP
-	bool
-
-config LH7A40X_CONTIGMEM
-	bool "Disable NUMA/SparseMEM Support"
-	help
-	  Say Y here if your bootloader sets the SROMLL bit(s) in
-	  the SDRAM controller, organizing memory as a contiguous
-	  array.  This option will disable sparse memory support
-          and force the kernel to manage all memory in one node.
-
-	  Setting this option incorrectly may prevent the kernel
-	  from booting.  It is OK to leave it N.
-
-	  For more information, consult
-	    <file:Documentation/arm/Sharp-LH/SDRAM>.
-
-config LH7A40X_ONE_BANK_PER_NODE
-	bool "Optimize NUMA Node Tables for Size"
-	depends on !LH7A40X_CONTIGMEM
-	help
-	  Say Y here to produce compact memory node tables.  By
-	  default pairs of adjacent physical RAM banks are managed
-	  together in a single node, incurring some wasted overhead
-	  in the node tables, however also maintaining compatibility
-	  with systems where physical memory is truly contiguous.
-
-	  Setting this option incorrectly may prevent the kernel from
-	  booting.  It is OK to leave it N.
-
-	  For more information, consult
-	    <file:Documentation/arm/Sharp-LH/SDRAM>.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lh7a40x/Makefile b/arch/arm/mach-lh7a40x/Makefile
deleted file mode 100644
index 94b8615..0000000
--- a/arch/arm/mach-lh7a40x/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= time.o clocks.o
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_MACH_KEV7A400)	+= arch-kev7a400.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A400)	+= arch-lpd7a40x.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A404)	+= arch-lpd7a40x.o irq-lh7a404.o
-obj-$(CONFIG_LPD7A40X_CPLD_SSP)	+= ssp-cpld.o
-obj-$(CONFIG_FB_ARMCLCD)	+= clcd.o
-
diff --git a/arch/arm/mach-lh7a40x/Makefile.boot b/arch/arm/mach-lh7a40x/Makefile.boot
deleted file mode 100644
index af941be..0000000
--- a/arch/arm/mach-lh7a40x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	:= 0xc0008000
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc4000000
-
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
deleted file mode 100644
index 71129c3..0000000
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* arch/arm/mach-lh7a40x/arch-kev7a400.c
- *
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-      /* This function calls the board specific IRQ initialization function. */
-
-static struct map_desc kev7a400_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= CPLD_VIRT,
-		.pfn		= __phys_to_pfn(CPLD_PHYS),
-		.length		= CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init kev7a400_map_io(void)
-{
-	iotable_init (kev7a400_io_desc, ARRAY_SIZE (kev7a400_io_desc));
-}
-
-static u16 CPLD_IRQ_mask;	/* Mask for CPLD IRQs, 1 == unmasked */
-
-static void kev7a400_ack_cpld_irq(struct irq_data *d)
-{
-	CPLD_CL_INT = 1 << (d->irq - IRQ_KEV7A400_CPLD);
-}
-
-static void kev7a400_mask_cpld_irq(struct irq_data *d)
-{
-	CPLD_IRQ_mask &= ~(1 << (d->irq - IRQ_KEV7A400_CPLD));
-	CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static void kev7a400_unmask_cpld_irq(struct irq_data *d)
-{
-	CPLD_IRQ_mask |= 1 << (d->irq - IRQ_KEV7A400_CPLD);
-	CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static struct irq_chip kev7a400_cpld_chip = {
-	.name		= "CPLD",
-	.irq_ack	= kev7a400_ack_cpld_irq,
-	.irq_mask	= kev7a400_mask_cpld_irq,
-	.irq_unmask	= kev7a400_unmask_cpld_irq,
-};
-
-
-static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
-	u32 mask = CPLD_LATCHED_INTS;
-	irq = IRQ_KEV7A400_CPLD;
-	for (; mask; mask >>= 1, ++irq)
-		if (mask & 1)
-			generic_handle_irq(irq);
-}
-
-void __init lh7a40x_init_board_irq (void)
-{
-	int irq;
-
-	for (irq = IRQ_KEV7A400_CPLD;
-	     irq < IRQ_KEV7A400_CPLD + NR_IRQ_BOARD; ++irq) {
-		set_irq_chip (irq, &kev7a400_cpld_chip);
-		set_irq_handler (irq, handle_edge_irq);
-		set_irq_flags (irq, IRQF_VALID);
-	}
-	set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
-
-		/* Clear all CPLD interrupts */
-	CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */
-
-	GPIO_GPIOINTEN = 0;		/* Disable all GPIO interrupts */
-	barrier();
-
-#if 0
-	GPIO_INTTYPE1
-		= (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */
-	GPIO_INTTYPE2 = 0;		/* Falling edge & low-level */
-	GPIO_GPIOFEOI = 0xff;		/* Clear all GPIO interrupts */
-	GPIO_GPIOINTEN = 0xff;		/* Enable all GPIO interrupts */
-
-	init_FIQ();
-#endif
-}
-
-MACHINE_START (KEV7A400, "Sharp KEV7a400")
-	/* Maintainer: Marc Singer */
-	.boot_params	= 0xc0000100,
-	.map_io		= kev7a400_map_io,
-	.init_irq	= lh7a400_init_irq,
-	.timer		= &lh7a40x_timer,
-MACHINE_END
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
deleted file mode 100644
index e735546..0000000
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/* arch/arm/mach-lh7a40x/arch-lpd7a40x.c
- *
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#define CPLD_INT_NETHERNET	(1<<0)
-#define CPLD_INTMASK_ETHERNET	(1<<2)
-#if defined (CONFIG_MACH_LPD7A400)
-# define CPLD_INT_NTOUCH		(1<<1)
-# define CPLD_INTMASK_TOUCH	(1<<3)
-# define CPLD_INT_PEN		(1<<4)
-# define CPLD_INTMASK_PEN	(1<<4)
-# define CPLD_INT_PIRQ		(1<<4)
-#endif
-#define CPLD_INTMASK_CPLD	(1<<7)
-#define CPLD_INT_CPLD		(1<<6)
-
-#define CPLD_CONTROL_SWINT		(1<<7) /* Disable all CPLD IRQs */
-#define CPLD_CONTROL_OCMSK		(1<<6) /* Mask USB1 connect IRQ */
-#define CPLD_CONTROL_PDRV		(1<<5) /* PCC_nDRV high */
-#define CPLD_CONTROL_USB1C		(1<<4) /* USB1 connect IRQ active */
-#define CPLD_CONTROL_USB1P		(1<<3) /* USB1 power disable */
-#define CPLD_CONTROL_AWKP		(1<<2) /* Auto-wakeup disabled  */
-#define CPLD_CONTROL_LCD_ENABLE		(1<<1) /* LCD Vee enable */
-#define CPLD_CONTROL_WRLAN_NENABLE	(1<<0) /* SMC91x power disable */
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= CPLD00_PHYS,
-		.end	= CPLD00_PHYS + CPLD00_SIZE - 1, /* Only needs 16B */
-		.flags	= IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.start	= IRQ_LPD7A40X_ETH_INT,
-		.end	= IRQ_LPD7A40X_ETH_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource lh7a40x_usbclient_resources[] = {
-	[0] = {
-		.start	= USB_PHYS,
-		.end	= (USB_PHYS + PAGE_SIZE),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB,
-		.end	= IRQ_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL;
-
-static struct platform_device lh7a40x_usbclient_device = {
-//	.name		= "lh7a40x_udc",
-	.name		= "lh7-udc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &lh7a40x_usbclient_dma_mask,
-		.coherent_dma_mask = 0xffffffffUL,
-	},
-	.num_resources	= ARRAY_SIZE (lh7a40x_usbclient_resources),
-	.resource	= lh7a40x_usbclient_resources,
-};
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-static struct resource lh7a404_usbhost_resources [] = {
-	[0] = {
-		.start	= USBH_PHYS,
-		.end	= (USBH_PHYS + 0xFF),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USHINTR,
-		.end	= IRQ_USHINTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 lh7a404_usbhost_dma_mask = 0xffffffffUL;
-
-static struct platform_device lh7a404_usbhost_device = {
-	.name		= "lh7a404-ohci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &lh7a404_usbhost_dma_mask,
-		.coherent_dma_mask = 0xffffffffUL,
-	},
-	.num_resources	= ARRAY_SIZE (lh7a404_usbhost_resources),
-	.resource	= lh7a404_usbhost_resources,
-};
-
-#endif
-
-static struct platform_device* lpd7a40x_devs[] __initdata = {
-	&smc91x_device,
-	&lh7a40x_usbclient_device,
-#if defined (CONFIG_ARCH_LH7A404)
-	&lh7a404_usbhost_device,
-#endif
-};
-
-extern void lpd7a400_map_io (void);
-
-static void __init lpd7a40x_init (void)
-{
-#if defined (CONFIG_MACH_LPD7A400)
-	CPLD_CONTROL |= 0
-		| CPLD_CONTROL_SWINT /* Disable software interrupt */
-		| CPLD_CONTROL_OCMSK; /* Mask USB1 connection IRQ */
-	CPLD_CONTROL &= ~(0
-			  | CPLD_CONTROL_LCD_ENABLE	/* Disable LCD */
-			  | CPLD_CONTROL_WRLAN_NENABLE	/* Enable SMC91x */
-		);
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
-	CPLD_CONTROL &= ~(0
-			  | CPLD_CONTROL_WRLAN_NENABLE	/* Enable SMC91x */
-		);
-#endif
-
-	platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs));
-#if defined (CONFIG_FB_ARMCLCD)
-        lh7a40x_clcd_init ();
-#endif
-}
-
-static void lh7a40x_ack_cpld_irq(struct irq_data *d)
-{
-	/* CPLD doesn't have ack capability, but some devices may */
-
-#if defined (CPLD_INTMASK_TOUCH)
-	/* The touch control *must* mask the interrupt because the
-	 * interrupt bit is read by the driver to determine if the pen
-	 * is still down. */
-	if (d->irq == IRQ_TOUCH)
-		CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
-#endif
-}
-
-static void lh7a40x_mask_cpld_irq(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_LPD7A40X_ETH_INT:
-		CPLD_INTERRUPTS |= CPLD_INTMASK_ETHERNET;
-		break;
-#if defined (IRQ_TOUCH)
-	case IRQ_TOUCH:
-		CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
-		break;
-#endif
-	}
-}
-
-static void lh7a40x_unmask_cpld_irq(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_LPD7A40X_ETH_INT:
-		CPLD_INTERRUPTS &= ~CPLD_INTMASK_ETHERNET;
-		break;
-#if defined (IRQ_TOUCH)
-	case IRQ_TOUCH:
-		CPLD_INTERRUPTS &= ~CPLD_INTMASK_TOUCH;
-		break;
-#endif
-	}
-}
-
-static struct irq_chip lpd7a40x_cpld_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lh7a40x_ack_cpld_irq,
-	.irq_mask	= lh7a40x_mask_cpld_irq,
-	.irq_unmask	= lh7a40x_unmask_cpld_irq,
-};
-
-static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int mask = CPLD_INTERRUPTS;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	if ((mask & (1<<0)) == 0)	/* WLAN */
-		generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
-
-#if defined (IRQ_TOUCH)
-	if ((mask & (1<<1)) == 0)	/* Touch */
-		generic_handle_irq(IRQ_TOUCH);
-#endif
-
-	/* Level-triggered need this */
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-
-void __init lh7a40x_init_board_irq (void)
-{
-	int irq;
-
-		/* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
-		                 PF7 supports the CPLD.
-		   Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
-		                 PF3 supports the CPLD.
-		   (Some) LPD7A404 prerelease boards report a version
-		   number of 0x16, but we force an override since the
-		   hardware is of the newer variety.
-		*/
-
-	unsigned char cpld_version = CPLD_REVISION;
-	int pinCPLD = (cpld_version == 0x28) ? 7 : 3;
-
-#if defined CONFIG_MACH_LPD7A404
-	cpld_version = 0x34;	/* Coerce LPD7A404 to RevB */
-#endif
-
-		/* First, configure user controlled GPIOF interrupts  */
-
-	GPIO_PFDD	&= ~0x0f; /* PF0-3 are inputs */
-	GPIO_INTTYPE1	&= ~0x0f; /* PF0-3 are level triggered */
-	GPIO_INTTYPE2	&= ~0x0f; /* PF0-3 are active low */
-	barrier ();
-	GPIO_GPIOFINTEN |=  0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
-
-		/* Then, configure CPLD interrupt */
-
-			/* Disable all CPLD interrupts */
-#if defined (CONFIG_MACH_LPD7A400)
-	CPLD_INTERRUPTS	= CPLD_INTMASK_TOUCH | CPLD_INTMASK_PEN
-		| CPLD_INTMASK_ETHERNET;
-	/* *** FIXME: don't know why we need 7 and 4. 7 is way wrong
-               and 4 is uncefined. */
-	// (1<<7)|(1<<4)|(1<<3)|(1<<2);
-#endif
-#if defined (CONFIG_MACH_LPD7A404)
-	CPLD_INTERRUPTS	= CPLD_INTMASK_ETHERNET;
-	/* *** FIXME: don't know why we need 6 and 5, neither is defined. */
-	// (1<<6)|(1<<5)|(1<<3);
-#endif
-	GPIO_PFDD	&= ~(1 << pinCPLD); /* Make input */
-	GPIO_INTTYPE1	&= ~(1 << pinCPLD); /* Level triggered */
-	GPIO_INTTYPE2	&= ~(1 << pinCPLD); /* Active low */
-	barrier ();
-	GPIO_GPIOFINTEN |=  (1 << pinCPLD); /* Enable */
-
-		/* Cascade CPLD interrupts */
-
-	for (irq = IRQ_BOARD_START;
-	     irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
-		set_irq_chip (irq, &lpd7a40x_cpld_chip);
-		set_irq_handler (irq, handle_level_irq);
-		set_irq_flags (irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler ((cpld_version == 0x28)
-				 ? IRQ_CPLD_V28
-				 : IRQ_CPLD_V34,
-				 lpd7a40x_cpld_handler);
-}
-
-static struct map_desc lpd7a40x_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{	/* Mapping added to work around chip select problems */
-		.virtual	= IOBARRIER_VIRT,
-		.pfn		= __phys_to_pfn(IOBARRIER_PHYS),
-		.length		= IOBARRIER_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CF_VIRT,
-		.pfn		= __phys_to_pfn(CF_PHYS),
-		.length		= CF_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD02_VIRT,
-		.pfn		= __phys_to_pfn(CPLD02_PHYS),
-		.length		= CPLD02_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD06_VIRT,
-		.pfn		= __phys_to_pfn(CPLD06_PHYS),
-		.length		= CPLD06_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD08_VIRT,
-		.pfn		= __phys_to_pfn(CPLD08_PHYS),
-		.length		= CPLD08_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD08_VIRT,
-		.pfn		= __phys_to_pfn(CPLD08_PHYS),
-		.length		= CPLD08_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD0A_VIRT,
-		.pfn		= __phys_to_pfn(CPLD0A_PHYS),
-		.length		= CPLD0A_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD0C_VIRT,
-		.pfn		= __phys_to_pfn(CPLD0C_PHYS),
-		.length		= CPLD0C_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD0E_VIRT,
-		.pfn		= __phys_to_pfn(CPLD0E_PHYS),
-		.length		= CPLD0E_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD10_VIRT,
-		.pfn		= __phys_to_pfn(CPLD10_PHYS),
-		.length		= CPLD10_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD12_VIRT,
-		.pfn		= __phys_to_pfn(CPLD12_PHYS),
-		.length		= CPLD12_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD14_VIRT,
-		.pfn		= __phys_to_pfn(CPLD14_PHYS),
-		.length		= CPLD14_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD16_VIRT,
-		.pfn		= __phys_to_pfn(CPLD16_PHYS),
-		.length		= CPLD16_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD18_VIRT,
-		.pfn		= __phys_to_pfn(CPLD18_PHYS),
-		.length		= CPLD18_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CPLD1A_VIRT,
-		.pfn		= __phys_to_pfn(CPLD1A_PHYS),
-		.length		= CPLD1A_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init
-lpd7a40x_map_io(void)
-{
-	iotable_init (lpd7a40x_io_desc, ARRAY_SIZE (lpd7a40x_io_desc));
-}
-
-#ifdef CONFIG_MACH_LPD7A400
-
-MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
-	/* Maintainer: Marc Singer */
-	.boot_params	= 0xc0000100,
-	.map_io		= lpd7a40x_map_io,
-	.init_irq	= lh7a400_init_irq,
-	.timer		= &lh7a40x_timer,
-	.init_machine	= lpd7a40x_init,
-MACHINE_END
-
-#endif
-
-#ifdef CONFIG_MACH_LPD7A404
-
-MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
-	/* Maintainer: Marc Singer */
-	.boot_params	= 0xc0000100,
-	.map_io		= lpd7a40x_map_io,
-	.init_irq	= lh7a404_init_irq,
-	.timer		= &lh7a40x_timer,
-	.init_machine	= lpd7a40x_init,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
deleted file mode 100644
index 7fe4fd3..0000000
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- *  arch/arm/mach-lh7a40x/clcd.c
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-
-//#include <linux/module.h>
-//#include <linux/time.h>
-
-//#include <asm/mach/time.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#define HRTFTC_HRSETUP		__REG(HRTFTC_PHYS + 0x00)
-#define HRTFTC_HRCON		__REG(HRTFTC_PHYS + 0x04)
-#define HRTFTC_HRTIMING1	__REG(HRTFTC_PHYS + 0x08)
-#define HRTFTC_HRTIMING2	__REG(HRTFTC_PHYS + 0x0c)
-
-#define ALI_SETUP		__REG(ALI_PHYS + 0x00)
-#define ALI_CONTROL		__REG(ALI_PHYS + 0x04)
-#define ALI_TIMING1		__REG(ALI_PHYS + 0x08)
-#define ALI_TIMING2		__REG(ALI_PHYS + 0x0c)
-
-#include "lcd-panel.h"
-
-static void lh7a40x_clcd_disable (struct clcd_fb *fb)
-{
-#if defined (CONFIG_MACH_LPD7A400)
-	CPLD_CONTROL &= ~(1<<1);	/* Disable LCD Vee */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
-	GPIO_PCD  &= ~(1<<3);		/* Disable LCD Vee */
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
-	HRTFTC_HRSETUP &= ~(1<<13);	/* Disable HRTFT controller */
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-	ALI_SETUP &= ~(1<<13);		/* Disable ALI */
-#endif
-}
-
-static void lh7a40x_clcd_enable (struct clcd_fb *fb)
-{
-	struct clcd_panel_extra* extra
-		= (struct clcd_panel_extra*) fb->board_data;
-
-#if defined (CONFIG_MACH_LPD7A400)
-	CPLD_CONTROL |= (1<<1);		/* Enable LCD Vee */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
-	GPIO_PCDD &= ~(1<<3);		/* Enable LCD Vee */
-	GPIO_PCD  |=  (1<<3);
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
-
-	if (extra) {
-		HRTFTC_HRSETUP
-			= (1 << 13)
-			| ((fb->fb.var.xres - 1) << 4)
-			| 0xc
-			| (extra->hrmode ? 1 : 0);
-		HRTFTC_HRCON
-			= ((extra->clsen ? 1 : 0) << 1)
-			| ((extra->spsen ? 1 : 0) << 0);
-		HRTFTC_HRTIMING1
-			= (extra->pcdel << 8)
-			| (extra->revdel << 4)
-			| (extra->lpdel << 0);
-		HRTFTC_HRTIMING2
-			= (extra->spldel << 9)
-			| (extra->pc2del << 0);
-	}
-	else
-		HRTFTC_HRSETUP
-			= (1 << 13)
-			| 0xc;
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-	if (extra) {
-		ALI_SETUP
-			= (1 << 13)
-			| ((fb->fb.var.xres - 1) << 4)
-			| 0xc
-			| (extra->hrmode ? 1 : 0);
-		ALI_CONTROL
-			= ((extra->clsen ? 1 : 0) << 1)
-			| ((extra->spsen ? 1 : 0) << 0);
-		ALI_TIMING1
-			= (extra->pcdel << 8)
-			| (extra->revdel << 4)
-			| (extra->lpdel << 0);
-		ALI_TIMING2
-			= (extra->spldel << 9)
-			| (extra->pc2del << 0);
-	}
-	else
-		ALI_SETUP
-			= (1 << 13)
-			| 0xc;
-#endif
-
-}
-
-#define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK)
-
-static int lh7a40x_clcd_setup (struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-	u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres
-			     *(lcd_panel.bpp/8));
-
-	fb->panel = &lcd_panel;
-
-		/* Enforce the sync polarity defaults */
-	if (!(fb->panel->tim2 & TIM2_IHS))
-		fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (!(fb->panel->tim2 & TIM2_IVS))
-		fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT;
-
-#if defined (HAS_LCD_PANEL_EXTRA)
-	fb->board_data = &lcd_panel_extra;
-#endif
-
-	fb->fb.screen_base
-		= dma_alloc_writecombine (&fb->dev->dev, len,
-					  &dma, GFP_KERNEL);
-	printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n",
-		fb->fb.screen_base, (void*) dma, len,
-		(void*) io_p2v (CLCDC_PHYS));
-	printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
-
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-#if defined (USE_RGB555)
-	fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */
-#endif
-
-	fb->fb.fix.smem_start = dma;
-	fb->fb.fix.smem_len = len;
-
-		/* Drive PE4 high to prevent CPLD crash */
-	GPIO_PEDD |= (1<<4);
-	GPIO_PED  |= (1<<4);
-
-	GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */
-
-//	fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb);
-//	fb->fb.fbops->fb_set_par (&fb->fb);
-
-	return 0;
-}
-
-static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
-}
-
-static void lh7a40x_clcd_remove (struct clcd_fb *fb)
-{
-	dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len,
-			       fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-static struct clcd_board clcd_platform_data = {
-	.name		= "lh7a40x FB",
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= lh7a40x_clcd_enable,
-	.setup		= lh7a40x_clcd_setup,
-	.mmap		= lh7a40x_clcd_mmap,
-	.remove		= lh7a40x_clcd_remove,
-	.disable	= lh7a40x_clcd_disable,
-};
-
-#define IRQ_CLCDC (IRQ_LCDINTR)
-
-#define AMBA_DEVICE(name,busid,base,plat,pid)			\
-static struct amba_device name##_device = {			\
-	.dev = {						\
-		.coherent_dma_mask = ~0,			\
-		.init_name = busid,				\
-		.platform_data = plat,				\
-		},						\
-	.res = {						\
-		.start	= base##_PHYS,				\
-		.end	= (base##_PHYS) + (4*1024) - 1,		\
-		.flags	= IORESOURCE_MEM,			\
-		},						\
-	.dma_mask	= ~0,					\
-	.irq		= { IRQ_##base, },			\
-	/* .dma		= base##_DMA,*/				\
-	.periphid = pid,					\
-}
-
-AMBA_DEVICE(clcd,  "cldc-lh7a40x",  CLCDC,     &clcd_platform_data, 0x41110);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&clcd_device,
-};
-
-void __init lh7a40x_clcd_init (void)
-{
-	int i;
-	int result;
-	printk ("CLCD: registering amba devices\n");
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		result = amba_device_register(d, &iomem_resource);
-		printk ("  %d -> %d\n", i ,result);
-	}
-}
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
deleted file mode 100644
index 0651f96..0000000
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* arch/arm/mach-lh7a40x/clocks.c
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#include <mach/hardware.h>
-#include <mach/clocks.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/string.h>
-
-struct module;
-
-struct clk {
-	struct list_head node;
-	unsigned long rate;
-	struct module *owner;
-	const char *name;
-};
-
-/* ----- */
-
-#define MAINDIV1(c)	(((c) >>  7) & 0x0f)
-#define MAINDIV2(c)	(((c) >> 11) & 0x1f)
-#define PS(c)		(((c) >> 18) & 0x03)
-#define PREDIV(c)	(((c) >>  2) & 0x1f)
-#define HCLKDIV(c)	(((c) >>  0) & 0x02)
-#define PCLKDIV(c)	(((c) >> 16) & 0x03)
-
-unsigned int fclkfreq_get (void)
-{
-	unsigned int clkset = CSC_CLKSET;
-	unsigned int gclk
-		= XTAL_IN
-		/ (1 << PS(clkset))
-		* (MAINDIV1(clkset) + 2)
-		/ (PREDIV(clkset)   + 2)
-		* (MAINDIV2(clkset) + 2)
-		;
-	return gclk;
-}
-
-unsigned int hclkfreq_get (void)
-{
-	unsigned int clkset = CSC_CLKSET;
-	unsigned int hclk = fclkfreq_get () / (HCLKDIV(clkset) + 1);
-
-	return hclk;
-}
-
-unsigned int pclkfreq_get (void)
-{
-	unsigned int clkset = CSC_CLKSET;
-	int pclkdiv = PCLKDIV(clkset);
-	unsigned int pclk;
-	if (pclkdiv == 0x3)
-		pclkdiv = 0x2;
-	pclk = hclkfreq_get () / (1 << pclkdiv);
-
-	return pclk;
-}
-
-/* ----- */
-
-struct clk *clk_get (struct device *dev, const char *id)
-{
-	return dev && strcmp(dev_name(dev), "cldc-lh7a40x") == 0
-		 ? NULL : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable (struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate (struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate (struct clk *clk, unsigned long rate)
-{
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate (struct clk *clk, unsigned long rate)
-{
-	return -EIO;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
deleted file mode 100644
index 6ed3f6b..0000000
--- a/arch/arm/mach-lh7a40x/common.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-lh7a40x/common.h
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-extern struct sys_timer lh7a40x_timer;
-
-extern void lh7a400_init_irq (void);
-extern void lh7a404_init_irq (void);
-extern void lh7a40x_clcd_init (void);
-extern void lh7a40x_init_board_irq (void);
-
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
deleted file mode 100644
index fe2e025..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/clocks.h
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CLOCKS_H
-#define __ASM_ARCH_CLOCKS_H
-
-unsigned int fclkfreq_get (void);
-unsigned int hclkfreq_get (void);
-unsigned int pclkfreq_get (void);
-
-#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
deleted file mode 100644
index 55c6edb..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/constants.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/constants.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CONSTANTS_H
-#define __ASM_ARCH_CONSTANTS_H
-
-
-/* Addressing constants */
-
-	/* SoC CPU IO addressing */
-#define IO_PHYS			(0x80000000)
-#define IO_VIRT			(0xf8000000)
-#define IO_SIZE			(0x0000B000)
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_PHYS		(0x20000000)
-# define CPLD_VIRT		(0xf2000000)
-# define CPLD_SIZE		PAGE_SIZE
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
-# define IOBARRIER_VIRT		0xf0000000
-# define IOBARRIER_SIZE		PAGE_SIZE
-
-# define CF_PHYS		0x60200000
-# define CF_VIRT		0xf6020000
-# define CF_SIZE		(8*1024)
-
-	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
-# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
-# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
-# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
-# define CPLD00_VIRT		CPLDX_VIRT (0x00)
-# define CPLD00_SIZE		PAGE_SIZE
-# define CPLD02_PHYS		CPLDX_PHYS (0x02)
-# define CPLD02_VIRT		CPLDX_VIRT (0x02)
-# define CPLD02_SIZE		PAGE_SIZE
-# define CPLD06_PHYS		CPLDX_PHYS (0x06)
-# define CPLD06_VIRT		CPLDX_VIRT (0x06)
-# define CPLD06_SIZE		PAGE_SIZE
-# define CPLD08_PHYS		CPLDX_PHYS (0x08)
-# define CPLD08_VIRT		CPLDX_VIRT (0x08)
-# define CPLD08_SIZE		PAGE_SIZE
-# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
-# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
-# define CPLD0A_SIZE		PAGE_SIZE
-# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
-# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
-# define CPLD0C_SIZE		PAGE_SIZE
-# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
-# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
-# define CPLD0E_SIZE		PAGE_SIZE
-# define CPLD10_PHYS		CPLDX_PHYS (0x10)
-# define CPLD10_VIRT		CPLDX_VIRT (0x10)
-# define CPLD10_SIZE		PAGE_SIZE
-# define CPLD12_PHYS		CPLDX_PHYS (0x12)
-# define CPLD12_VIRT		CPLDX_VIRT (0x12)
-# define CPLD12_SIZE		PAGE_SIZE
-# define CPLD14_PHYS		CPLDX_PHYS (0x14)
-# define CPLD14_VIRT		CPLDX_VIRT (0x14)
-# define CPLD14_SIZE		PAGE_SIZE
-# define CPLD16_PHYS		CPLDX_PHYS (0x16)
-# define CPLD16_VIRT		CPLDX_VIRT (0x16)
-# define CPLD16_SIZE		PAGE_SIZE
-# define CPLD18_PHYS		CPLDX_PHYS (0x18)
-# define CPLD18_VIRT		CPLDX_VIRT (0x18)
-# define CPLD18_SIZE		PAGE_SIZE
-# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
-# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
-# define CPLD1A_SIZE		PAGE_SIZE
-#endif
-
-	/* Timing constants */
-
-#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
-#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
-#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
-#define HCLK			(99993600)
-//#define HCLK			(119808000)
-
-#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
deleted file mode 100644
index cff3362..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-	@ It is not known if this will be appropriate for every 40x
-	@ board.
-
-		.macro  addruart, rp, rv
-		mov     \rp, #0x00000700        @ offset from base
-		orr     \rv, \rp, #0xf8000000   @ virtual base
-		orr     \rp, \rp, #0x80000000   @ physical base
-		.endm
-
-		.macro  senduart,rd,rx
-		strb    \rd, [\rx]              @ DATA
-		.endm
-
-		.macro  busyuart,rd,rx          @ spin while busy
-1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
-		bne     1001b                   @ yes, spin
-		.endm
-
-		.macro  waituart,rd,rx          @ wait for Tx FIFO room
-1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
-		bne     1001b                   @ yes, spin
-		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
deleted file mode 100644
index baa3f8d..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/dma.h
- *
- *  Copyright (C) 2005 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
-	DMA_M2M0	= 0,
-	DMA_M2M1	= 1,
-	DMA_M2P0	= 2,	/* Tx */
-	DMA_M2P1	= 3,	/* Rx */
-	DMA_M2P2	= 4,	/* Tx */
-	DMA_M2P3	= 5,	/* Rx */
-	DMA_M2P4	= 6,	/* Tx - AC97 */
-	DMA_M2P5	= 7,	/* Rx - AC97 */
-	DMA_M2P6	= 8,	/* Tx */
-	DMA_M2P7	= 9,	/* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1		(1<<11)
-#define DMAC_GIR_MMI0		(1<<10)
-#define DMAC_GIR_MPI8		(1<<9)
-#define DMAC_GIR_MPI9		(1<<8)
-#define DMAC_GIR_MPI6		(1<<7)
-#define DMAC_GIR_MPI7		(1<<6)
-#define DMAC_GIR_MPI4		(1<<5)
-#define DMAC_GIR_MPI5		(1<<4)
-#define DMAC_GIR_MPI2		(1<<3)
-#define DMAC_GIR_MPI3		(1<<2)
-#define DMAC_GIR_MPI0		(1<<1)
-#define DMAC_GIR_MPI1		(1<<0)
-
-#define DMAC_M2P0		0x0000
-#define DMAC_M2P1		0x0040
-#define DMAC_M2P2		0x0080
-#define DMAC_M2P3		0x00c0
-#define DMAC_M2P4		0x0240
-#define DMAC_M2P5		0x0200
-#define DMAC_M2P6		0x02c0
-#define DMAC_M2P7		0x0280
-#define DMAC_M2P8		0x0340
-#define DMAC_M2P9		0x0300
-#define DMAC_M2M0		0x0100
-#define DMAC_M2M1		0x0140
-
-#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE	(1<<4)
-
-#define DMAC_PORT_USB		0
-#define DMAC_PORT_SDMMC		1
-#define DMAC_PORT_AC97_1	2
-#define DMAC_PORT_AC97_2	3
-#define DMAC_PORT_AC97_3	4
-#define DMAC_PORT_UART1		6
-#define DMAC_PORT_UART2		7
-#define DMAC_PORT_UART3		8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
-#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
-
-#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
-#define DMAC_PSTATUS_STALLRINT	 (1<<0)
-
-#define DMAC_INT_CHE		 (1<<3)
-#define DMAC_INT_NFB		 (1<<1)
-#define DMAC_INT_STALL		 (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
deleted file mode 100644
index 069bb4c..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/* In order to allow there to be support for both of the processor
-   classes at the same time, we make a hack here that isn't very
-   pretty.  At startup, the link pointed to with the
-   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
-   detected as a lh7a404.
-
-   *** FIXME: we should clean this up so that there is only one
-	      implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-		b	1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000:		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-
-1009:
-               .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-1009:
-               .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-1009:
-               .endm
-#endif
-
-
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
deleted file mode 100644
index 59d2ace..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/hardware.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#else
-
-# if 0
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contiguous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x)	__REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x)	__REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
deleted file mode 100644
index 6ece459..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/io.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
deleted file mode 100644
index 0f9b836..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/irqs.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board.  For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START	80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
-  /* FIQs */
-
-# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT	1	/* Battery Low */
-# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
-# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
-
-  /* IRQs */
-
-# define IRQ_CSINT	4	/* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI	8	/* Timer 1 underflow */
-# define IRQ_T2UI	9	/* Timer 2 underflow */
-# define IRQ_RTCMI	10
-# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR	12
-# define IRQ_UART2INTR	13
-# define IRQ_LCDINTR	14
-# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR	16
-# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
-# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
-# define IRQ_USBINTR	20
-# define IRQ_DMAINTR	21
-# define IRQ_T3UI	22	/* Timer 3 underflow */
-# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN	0	/* Brownout */
-# define IRQ_WDTINTR	1	/* Watchdog Timer */
-# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
-# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
-# define IRQ_T1UI	4	/* Timer 1 underflow */
-# define IRQ_T2UI	5	/* Timer 2 underflow */
-# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1	8
-# define IRQ_DMAM2P2	9
-# define IRQ_DMAM2P3	10
-# define IRQ_DMAM2P4	11
-# define IRQ_DMAM2P5	12
-# define IRQ_DMAM2P6	13
-# define IRQ_DMAM2P7	14
-# define IRQ_DMAM2P8	15
-# define IRQ_DMAM2P9	16
-# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1	18
-# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR	20
-# define IRQ_GPIO2INTR	21
-# define IRQ_GPIO3INTR	22
-# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
-# define IRQ_SOFT_V1_24	24
-# define IRQ_SOFT_V1_25	25
-# define IRQ_SOFT_V1_26	26
-# define IRQ_SOFT_V1_27	27
-# define IRQ_SOFT_V1_28	28
-# define IRQ_SOFT_V1_29	29
-# define IRQ_SOFT_V1_30	30
-# define IRQ_SOFT_V1_31	31
-
-# define IRQ_BLINT	32	/* Battery Low */
-# define IRQ_BMIINTR	33	/* Battery Monitor */
-# define IRQ_MCINTR	34	/* Media Change */
-# define IRQ_TINTR	35	/* 64Hz Tick */
-# define IRQ_WEINT	36	/* Watchdog Expired */
-# define IRQ_RTCMI	37	/* Real-time Clock Match */
-# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR	39	/* UART1 Error */
-# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR	41	/* UART2 Error */
-# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR	43	/* UART3 Error */
-# define IRQ_SCIINTR	44	/* Smart Card */
-# define IRQ_TSCINTR	45	/* Touchscreen */
-# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR	48
-# define IRQ_GPIO6INTR	49
-# define IRQ_GPIO7INTR	50
-# define IRQ_T3UI	51	/* Timer 3 underflow */
-# define IRQ_LCDINTR	52	/* LCD Controller */
-# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
-# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
-# define IRQ_USBINTR	55	/* USB Device Port */
-# define IRQ_USHINTR	56	/* USB Host Port */
-# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
-# define IRQ_SOFT_V2_26	58
-# define IRQ_SOFT_V2_27	59
-# define IRQ_SOFT_V2_28	60
-# define IRQ_SOFT_V2_29	61
-# define IRQ_SOFT_V2_30	62
-# define IRQ_SOFT_V2_31	63
-
-# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- IRQ_GPIO0INTR)
-
-			/* Vector Address constants */
-# define VA_VECTORED	0x100	/* Set for vectored interrupt */
-# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
-
-#endif
-
-  /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK	IRQ_TINTR
-#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
-#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
-#define IRQ_USB		IRQ_USBINTR	/* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
-# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
-# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
-# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
-#endif
-
-  /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		5
-# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
-# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
-# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		2
-# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
-# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH		IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
deleted file mode 100644
index f77bde8..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/memory.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- *
- *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Sparsemem version of the above
- */
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	24
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
deleted file mode 100644
index ea44396..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/registers.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/registers.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/constants.h>
-
-#ifndef __ASM_ARCH_REGISTERS_H
-#define __ASM_ARCH_REGISTERS_H
-
-
-	/* Physical register base addresses */
-
-#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
-#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
-#define USB_PHYS	(0x80000200)	/* USB Client */
-#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
-#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
-#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
-#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
-#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
-#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
-#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
-#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
-#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
-#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
-#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
-#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
-#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
-#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
-#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
-#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
-#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
-#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
-#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
-#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
-#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
-
-	/* Physical registers of the LH7A404 */
-
-#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
-#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
-#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
-#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
-
-/*#define KBD_PHYS	(0x80000e00) */
-/*#define LCDICP_PHYS	(0x80001000) */
-
-
-	/* Clock/State Controller register */
-
-#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
-#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
-#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
-#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
-
-#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
-#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
-#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
-#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
-#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
-#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
-#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
-#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
-#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
-#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
-#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
-#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
-#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
-
-#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
-#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
-#define CSC_PWRSR_CHIPID_SHIFT	(16)
-#define CSC_PWRSR_CHIPID_MASK	(0xff)
-
-#define CSC_USBDRESET_APBRESETREG	(1<<1)
-#define CSC_USBDRESET_IORESETREG	(1<<0)
-
-	/* Interrupt Controller registers */
-
-#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
-#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
-#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
-#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
-
-
-	/* Vectored Interrupted Controller registers */
-
-#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
-#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
-#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
-#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
-#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
-#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
-#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
-#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
-#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
-#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
-#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
-#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
-#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
-#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
-#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
-#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
-#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
-#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
-#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
-#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
-#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
-#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
-#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
-#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
-#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
-#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
-
-#define VIC_CNTL_ENABLE	(0x20)
-
-	/* USB Host registers (Open HCI compatible) */
-
-#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
-
-
-	/* GPIO registers */
-
-#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
-#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
-#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
-#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
-#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
-#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
-#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
-#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
-#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
-#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
-#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
-#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
-
-
-	/* Static Memory Controller registers */
-
-#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
-#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
-#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
-#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
-#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
-#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
-
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
-# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
-# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
-# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
-# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
-# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
-# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
-# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
-
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
-# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
-# define CPLD_FLASH		__REG16(CPLD10_PHYS)
-# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
-# define CPLD_REVISION		__REG16(CPLD14_PHYS)
-# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
-# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
-# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
-
-#endif
-
-	/* Timer registers */
-
-#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
-#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
-#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
-#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
-
-#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
-#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
-#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
-#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
-
-#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
-
-#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
-#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
-#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
-#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
-
-#define TIMER_C_ENABLE		(1<<7)
-#define TIMER_C_PERIODIC	(1<<6)
-#define TIMER_C_FREERUNNING	(0)
-#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
-#define TIMER_C_508KHZ		(0x08)
-
-	/* GPIO registers */
-
-#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
-#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
-#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
-#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
-#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
-#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
-#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
-
-
-#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
deleted file mode 100644
index 5099161..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/ssp.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* ssp.h
-
-   written by Marc Singer
-   6 Dec 2004
-
-   Copyright (C) 2004 Marc Singer
-
-   -----------
-   DESCRIPTION
-   -----------
-
-   This SSP header is available throughout the kernel, for this
-   machine/architecture, because drivers that use it may be dispersed.
-
-   This file was cloned from the 7952x implementation.  It would be
-   better to share them, but we're taking an easier approach for the
-   time being.
-
-*/
-
-#if !defined (__SSP_H__)
-#    define   __SSP_H__
-
-/* ----- Includes */
-
-/* ----- Types */
-
-struct ssp_driver {
-	int  (*init)		(void);
-	void (*exit)		(void);
-	void (*acquire)		(void);
-	void (*release)		(void);
-	int  (*configure)	(int device, int mode, int speed,
-				 int frame_size_write, int frame_size_read);
-	void (*chip_select)	(int enable);
-	void (*set_callbacks)   (void* handle,
-				 irqreturn_t (*callback_tx)(void*),
-				 irqreturn_t (*callback_rx)(void*));
-	void (*enable)		(void);
-	void (*disable)		(void);
-//	int  (*save_state)	(void*);
-//	void (*restore_state)	(void*);
-	int  (*read)		(void);
-	int  (*write)		(u16 data);
-	int  (*write_read)	(u16 data);
-	void (*flush)		(void);
-	void (*write_async)	(void* pv, size_t cb);
-	size_t (*write_pos)	(void);
-};
-
-	/* These modes are only available on the LH79524 */
-#define SSP_MODE_SPI		(1)
-#define SSP_MODE_SSI		(2)
-#define SSP_MODE_MICROWIRE	(3)
-#define SSP_MODE_I2S		(4)
-
-	/* CPLD SPI devices */
-#define DEVICE_EEPROM	0	/* Configuration eeprom */
-#define DEVICE_MAC	1	/* MAC eeprom (LPD79524) */
-#define DEVICE_CODEC	2	/* Audio codec */
-#define DEVICE_TOUCH	3	/* Touch screen (LPD79520) */
-
-/* ----- Globals */
-
-/* ----- Prototypes */
-
-//extern struct ssp_driver lh79520_i2s_driver;
-extern struct ssp_driver lh7a400_cpld_ssp_driver;
-
-#endif  /* __SSP_H__ */
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
deleted file mode 100644
index 45a56d3..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/system.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset (0);
-}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
deleted file mode 100644
index 08028ce..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/timex.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/constants.h>
-
-#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE		3686400
-*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
deleted file mode 100644
index 55b80d4..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA	(0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS	(0x10)
-#endif
-#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
-
-	/* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
-	while (UART_STATUS & nTxRdy)
-		barrier();
-	UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-	/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
deleted file mode 100644
index d62da73..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
deleted file mode 100644
index c7433b3..0000000
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-kev7a400.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/hardware.h>
-#include <asm/mach/irqs.h>
-
-#include "common.h"
-
-  /* KEV7a400 CPLD IRQ handling */
-
-static u16 CPLD_IRQ_mask;	/* Mask for CPLD IRQs, 1 == unmasked */
-
-static void
-lh7a400_ack_cpld_irq (u32 irq)
-{
-	CPLD_CL_INT = 1 << (irq - IRQ_KEV7A400_CPLD);
-}
-
-static void
-lh7a400_mask_cpld_irq (u32 irq)
-{
-	CPLD_IRQ_mask &= ~(1 << (irq - IRQ_KEV7A400_CPLD));
-	CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static void
-lh7a400_unmask_cpld_irq (u32 irq)
-{
-	CPLD_IRQ_mask |= 1 << (irq - IRQ_KEV7A400_CPLD);
-	CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static struct
-irq_chip lh7a400_cpld_chip = {
-	.name	= "CPLD",
-	.ack	= lh7a400_ack_cpld_irq,
-	.mask	= lh7a400_mask_cpld_irq,
-	.unmask	= lh7a400_unmask_cpld_irq,
-};
-
-static void
-lh7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
-	u32 mask = CPLD_LATCHED_INTS;
-	irq = IRQ_KEV_7A400_CPLD;
-	for (; mask; mask >>= 1, ++irq) {
-		if (mask & 1)
-			desc[irq].handle (irq, desc);
-	}
-}
-
-  /* IRQ initialization */
-
-void __init
-lh7a400_init_board_irq (void)
-{
-	int irq;
-
-	for (irq = IRQ_KEV7A400_CPLD;
-	     irq < IRQ_KEV7A400_CPLD + NR_IRQ_KEV7A400_CPLD; ++irq) {
-		set_irq_chip (irq, &lh7a400_cpld_chip);
-		set_irq_handler (irq, handle_edge_irq);
-		set_irq_flags (irq, IRQF_VALID);
-	}
-	set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
-
-		/* Clear all CPLD interrupts */
-	CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */
-
-    /* *** FIXME CF enabled in ide-probe.c */
-
-	GPIO_GPIOINTEN = 0;		/* Disable all GPIO interrupts */
-	barrier();
-	GPIO_INTTYPE1
-		= (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */
-	GPIO_INTTYPE2 = 0;		/* Falling edge & low-level */
-	GPIO_GPIOFEOI = 0xff;		/* Clear all GPIO interrupts */
-	GPIO_GPIOINTEN = 0xff;		/* Enable all GPIO interrupts */
-
-	init_FIQ();
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
deleted file mode 100644
index f2e7e65..0000000
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lh7a400.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-  /* CPU IRQ handling */
-
-static void lh7a400_mask_irq(struct irq_data *d)
-{
-	INTC_INTENC = (1 << d->irq);
-}
-
-static void lh7a400_unmask_irq(struct irq_data *d)
-{
-	INTC_INTENS = (1 << d->irq);
-}
-
-static void lh7a400_ack_gpio_irq(struct irq_data *d)
-{
-	GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
-	INTC_INTENC = (1 << d->irq);
-}
-
-static struct irq_chip lh7a400_internal_chip = {
-	.name		= "MPU",
-	.irq_ack	= lh7a400_mask_irq, /* Level triggering -> mask is ack */
-	.irq_mask	= lh7a400_mask_irq,
-	.irq_unmask	= lh7a400_unmask_irq,
-};
-
-static struct irq_chip lh7a400_gpio_chip = {
-	.name		= "GPIO",
-	.irq_ack	= lh7a400_ack_gpio_irq,
-	.irq_mask	= lh7a400_mask_irq,
-	.irq_unmask	= lh7a400_unmask_irq,
-};
-
-
-  /* IRQ initialization */
-
-void __init lh7a400_init_irq (void)
-{
-	int irq;
-
-	INTC_INTENC = 0xffffffff;	/* Disable all interrupts */
-	GPIO_GPIOFINTEN = 0x00;		/* Disable all GPIOF interrupts */
-	barrier ();
-
-	for (irq = 0; irq < NR_IRQS; ++irq) {
-		switch (irq) {
-		case IRQ_GPIO0INTR:
-		case IRQ_GPIO1INTR:
-		case IRQ_GPIO2INTR:
-		case IRQ_GPIO3INTR:
-		case IRQ_GPIO4INTR:
-		case IRQ_GPIO5INTR:
-		case IRQ_GPIO6INTR:
-		case IRQ_GPIO7INTR:
-			set_irq_chip (irq, &lh7a400_gpio_chip);
-			set_irq_handler (irq, handle_level_irq); /* OK default */
-			break;
-		default:
-			set_irq_chip (irq, &lh7a400_internal_chip);
-			set_irq_handler (irq, handle_level_irq);
-		}
-		set_irq_flags (irq, IRQF_VALID);
-	}
-
-	lh7a40x_init_board_irq ();
-
-/* *** FIXME: the LH7a400 does use FIQ interrupts in some cases.  For
-   the time being, these are not initialized. */
-
-/*	init_FIQ(); */
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
deleted file mode 100644
index 14b1733..0000000
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lh7a404.c
- *
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-#define USE_PRIORITIES
-
-/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
- * information on using the vectored interrupt controller's
- * prioritizing feature. */
-
-static unsigned char irq_pri_vic1[] = {
-#if defined (USE_PRIORITIES)
-	IRQ_GPIO3INTR,			/* CPLD */
-	IRQ_DMAM2P4, IRQ_DMAM2P5,	/* AC97 */
-#endif
-};
-static unsigned char irq_pri_vic2[] = {
-#if defined (USE_PRIORITIES)
-	IRQ_T3UI,			/* Timer */
-	IRQ_GPIO7INTR,			/* CPLD */
-	IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR,
-	IRQ_LCDINTR,			/* LCD */
-	IRQ_TSCINTR,			/* ADC/Touchscreen */
-#endif
-};
-
-  /* CPU IRQ handling */
-
-static void lh7a404_vic1_mask_irq(struct irq_data *d)
-{
-	VIC1_INTENCLR = (1 << d->irq);
-}
-
-static void lh7a404_vic1_unmask_irq(struct irq_data *d)
-{
-	VIC1_INTEN = (1 << d->irq);
-}
-
-static void lh7a404_vic2_mask_irq(struct irq_data *d)
-{
-	VIC2_INTENCLR = (1 << (d->irq - 32));
-}
-
-static void lh7a404_vic2_unmask_irq(struct irq_data *d)
-{
-	VIC2_INTEN = (1 << (d->irq - 32));
-}
-
-static void lh7a404_vic1_ack_gpio_irq(struct irq_data *d)
-{
-	GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
-	VIC1_INTENCLR = (1 << d->irq);
-}
-
-static void lh7a404_vic2_ack_gpio_irq(struct irq_data *d)
-{
-	GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
-	VIC2_INTENCLR = (1 << d->irq);
-}
-
-static struct irq_chip lh7a404_vic1_chip = {
-	.name		= "VIC1",
-	.irq_ack	= lh7a404_vic1_mask_irq, /* Because level-triggered */
-	.irq_mask	= lh7a404_vic1_mask_irq,
-	.irq_unmask	= lh7a404_vic1_unmask_irq,
-};
-
-static struct irq_chip lh7a404_vic2_chip = {
-	.name		= "VIC2",
-	.irq_ack	= lh7a404_vic2_mask_irq, /* Because level-triggered */
-	.irq_mask	= lh7a404_vic2_mask_irq,
-	.irq_unmask	= lh7a404_vic2_unmask_irq,
-};
-
-static struct irq_chip lh7a404_gpio_vic1_chip = {
-	.name		= "GPIO-VIC1",
-	.irq_ack	= lh7a404_vic1_ack_gpio_irq,
-	.irq_mask	= lh7a404_vic1_mask_irq,
-	.irq_unmask	= lh7a404_vic1_unmask_irq,
-};
-
-static struct irq_chip lh7a404_gpio_vic2_chip = {
-	.name		= "GPIO-VIC2",
-	.irq_ack	= lh7a404_vic2_ack_gpio_irq,
-	.irq_mask	= lh7a404_vic2_mask_irq,
-	.irq_unmask	= lh7a404_vic2_unmask_irq,
-};
-
-  /* IRQ initialization */
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-extern void* branch_irq_lh7a400;
-#endif
-
-void __init lh7a404_init_irq (void)
-{
-	int irq;
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-#define NOP 0xe1a00000			/* mov r0, r0 */
-	branch_irq_lh7a400 = NOP;
-#endif
-
-	VIC1_INTENCLR = 0xffffffff;
-	VIC2_INTENCLR = 0xffffffff;
-	VIC1_INTSEL = 0;		/* All IRQs */
-	VIC2_INTSEL = 0;		/* All IRQs */
-	VIC1_NVADDR = VA_VIC1DEFAULT;
-	VIC2_NVADDR = VA_VIC2DEFAULT;
-	VIC1_VECTADDR = 0;
-	VIC2_VECTADDR = 0;
-
-	GPIO_GPIOFINTEN = 0x00;		/* Disable all GPIOF interrupts */
-	barrier ();
-
-		/* Install prioritized interrupts, if there are any. */
-		/* The | 0x20*/
-	for (irq = 0; irq < 16; ++irq) {
-		(&VIC1_VAD0)[irq]
-			= (irq < ARRAY_SIZE (irq_pri_vic1))
-			? (irq_pri_vic1[irq] | VA_VECTORED) : 0;
-		(&VIC1_VECTCNTL0)[irq]
-			= (irq < ARRAY_SIZE (irq_pri_vic1))
-			? (irq_pri_vic1[irq] | VIC_CNTL_ENABLE) : 0;
-		(&VIC2_VAD0)[irq]
-			= (irq < ARRAY_SIZE (irq_pri_vic2))
-			? (irq_pri_vic2[irq] | VA_VECTORED) : 0;
-		(&VIC2_VECTCNTL0)[irq]
-			= (irq < ARRAY_SIZE (irq_pri_vic2))
-			? (irq_pri_vic2[irq] | VIC_CNTL_ENABLE) : 0;
-	}
-
-	for (irq = 0; irq < NR_IRQS; ++irq) {
-		switch (irq) {
-		case IRQ_GPIO0INTR:
-		case IRQ_GPIO1INTR:
-		case IRQ_GPIO2INTR:
-		case IRQ_GPIO3INTR:
-		case IRQ_GPIO4INTR:
-		case IRQ_GPIO5INTR:
-		case IRQ_GPIO6INTR:
-		case IRQ_GPIO7INTR:
-			set_irq_chip (irq, irq < 32
-				      ? &lh7a404_gpio_vic1_chip
-				      : &lh7a404_gpio_vic2_chip);
-			set_irq_handler (irq, handle_level_irq); /* OK default */
-			break;
-		default:
-			set_irq_chip (irq, irq < 32
-				      ? &lh7a404_vic1_chip
-				      : &lh7a404_vic2_chip);
-			set_irq_handler (irq, handle_level_irq);
-		}
-		set_irq_flags (irq, IRQF_VALID);
-	}
-
-	lh7a40x_init_board_irq ();
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
deleted file mode 100644
index 1bfdcdd..0000000
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lpd7a40x.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void lh7a40x_ack_cpld_irq(struct irq_data *d)
-{
-	/* CPLD doesn't have ack capability */
-}
-
-static void lh7a40x_mask_cpld_irq(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_LPD7A40X_ETH_INT:
-		CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
-		break;
-	case IRQ_LPD7A400_TS:
-		CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
-		break;
-	}
-}
-
-static void lh7a40x_unmask_cpld_irq(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_LPD7A40X_ETH_INT:
-		CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
-		break;
-	case IRQ_LPD7A400_TS:
-		CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
-		break;
-	}
-}
-
-static struct irq_chip lh7a40x_cpld_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lh7a40x_ack_cpld_irq,
-	.irq_mask	= lh7a40x_mask_cpld_irq,
-	.irq_unmask	= lh7a40x_unmask_cpld_irq,
-};
-
-static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int mask = CPLD_INTERRUPTS;
-
-	desc->irq_data.chip->ack (irq);
-
-	if ((mask & 0x1) == 0)	/* WLAN */
-		generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
-
-	if ((mask & 0x2) == 0)	/* Touch */
-		generic_handle_irq(IRQ_LPD7A400_TS);
-
-	desc->irq_data.chip->unmask (irq); /* Level-triggered need this */
-}
-
-
-  /* IRQ initialization */
-
-void __init lh7a40x_init_board_irq (void)
-{
-	int irq;
-
-		/* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
-		                 PF7 supports the CPLD.
-		   Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
-		                 PF3 supports the CPLD.
-		   (Some) LPD7A404 prerelease boards report a version
-		   number of 0x16, but we force an override since the
-		   hardware is of the newer variety.
-		*/
-
-	unsigned char cpld_version = CPLD_REVISION;
-	int pinCPLD;
-
-#if defined CONFIG_MACH_LPD7A404
-	cpld_version = 0x34;	/* Override, for now */
-#endif
-	pinCPLD = (cpld_version == 0x28) ? 7 : 3;
-
-		/* First, configure user controlled GPIOF interrupts  */
-
-	GPIO_PFDD	&= ~0x0f; /* PF0-3 are inputs */
-	GPIO_INTTYPE1	&= ~0x0f; /* PF0-3 are level triggered */
-	GPIO_INTTYPE2	&= ~0x0f; /* PF0-3 are active low */
-	barrier ();
-	GPIO_GPIOFINTEN |=  0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
-
-		/* Then, configure CPLD interrupt */
-
-	CPLD_INTERRUPTS	=   0x0c; /* Disable all CPLD interrupts */
-	GPIO_PFDD	&= ~(1 << pinCPLD); /* Make input */
-	GPIO_INTTYPE1	|=  (1 << pinCPLD); /* Edge triggered */
-	GPIO_INTTYPE2	&= ~(1 << pinCPLD); /* Active low */
-	barrier ();
-	GPIO_GPIOFINTEN |=  (1 << pinCPLD); /* Enable */
-
-		/* Cascade CPLD interrupts */
-
-	for (irq = IRQ_BOARD_START;
-	     irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
-		set_irq_chip (irq, &lh7a40x_cpld_chip);
-		set_irq_handler (irq, handle_edge_irq);
-		set_irq_flags (irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler ((cpld_version == 0x28)
-				 ? IRQ_CPLD_V28
-				 : IRQ_CPLD_V34,
-				 lh7a40x_cpld_handler);
-}
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
deleted file mode 100644
index a7f5027..0000000
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ /dev/null
@@ -1,345 +0,0 @@
-/* lcd-panel.h
-
-   written by Marc Singer
-   18 Jul 2005
-
-   Copyright (C) 2005 Marc Singer
-
-   -----------
-   DESCRIPTION
-   -----------
-
-   Only one panel may be defined at a time.
-
-   The pixel clock is calculated to be no greater than the target.
-
-   Each timing value is accompanied by a specification comment.
-
-     UNITS/MIN/TYP/MAX
-
-   Most of the units will be in clocks.
-
-   USE_RGB555
-
-     Define this macro to configure the AMBA LCD controller to use an
-     RGB555 encoding for the pels instead of the normal RGB565.
-
-   LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
-
-     These boards are best approximated by 555 for all panels.  Some
-     can use an extra low-order bit of blue in bit 16 of the color
-     value, but we don't have a way to communicate this non-linear
-     mapping to the kernel.
-
-*/
-
-#if !defined (__LCD_PANEL_H__)
-#    define   __LCD_PANEL_H__
-
-#if defined (MACH_LPD79520)\
- || defined (MACH_LPD79524)\
- || defined (MACH_LPD7A400)\
- || defined (MACH_LPD7A404)
-# define USE_RGB555
-#endif
-
-struct clcd_panel_extra {
-	unsigned int hrmode;
-	unsigned int clsen;
-	unsigned int spsen;
-	unsigned int pcdel;
-	unsigned int revdel;
-	unsigned int lpdel;
-	unsigned int spldel;
-	unsigned int pc2del;
-};
-
-#define NS_TO_CLOCK(ns,c)	((((ns)*((c)/1000) + (1000000 - 1))/1000000))
-#define CLOCK_TO_DIV(e,c)	(((c) + (e) - 1)/(e))
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
-
-	/* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
-	/* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
-
-#define PIX_CLOCK_TARGET	(6800000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "3.5in QVGA (LQ035Q7DB02)",
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 16,
-		.right_margin	= 21,
-		.upper_margin	= 8,			// line/8/8/8
-		.lower_margin	= 5,
-		.hsync_len	= 61,
-		.vsync_len	= NS_TO_CLOCK (60, PIX_CLOCK),
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#define HAS_LCD_PANEL_EXTRA
-
-static struct clcd_panel_extra lcd_panel_extra = {
-	.hrmode = 1,
-	.clsen = 1,
-	.spsen = 1,
-	.pcdel = 8,
-	.revdel = 7,
-	.lpdel = 13,
-	.spldel = 77,
-	.pc2del = 208,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
-
-	/* Logic Product Development LCD 5.7" QVGA -10 */
-	/* Sharp PN LQ057Q3DC02 */
-	/* QVGA mode, V/Q=LOW */
-
-/* From Sharp on 2006.1.3.  I believe some of the values are incorrect
- * based on the datasheet.
-
-    Timing0	TIMING1		TIMING2		CONTROL
-    0x140A0C4C	0x080504EF	0x013F380D	0x00000829
-    HBP= 20	VBP=  8		BCD=  0
-    HFP= 10	VFP=  5		CPL=319
-    HSW= 12	VSW=  1		IOE=  0
-    PPL= 19	LPP=239		IPC=  1
-				IHS=  1
-				IVS=  1
-				ACB=  0
-				CSEL= 0
-				PCD= 13
-
- */
-
-/* The full horizontal cycle (Th) is clock/360/400/450. */
-/* The full vertical   cycle (Tv) is line/251/262/280. */
-
-#define PIX_CLOCK_TARGET	(6300000) /* -/6.3/7 MHz */
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "5.7in QVGA (LQ057Q3DC02)",
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 11,
-		.right_margin	= 400-11-320-2,
-		.upper_margin	= 7,			// line/7/7/7
-		.lower_margin	= 262-7-240-2,
-		.hsync_len	= 2,			// clk/2/96/200
-		.vsync_len	= 2,			// line/2/-/34
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
-
-	/* Logic Product Development LCD 6.4" VGA -10 */
-	/* Sharp PN LQ64D343 */
-
-/* The full horizontal cycle (Th) is clock/750/800/900. */
-/* The full vertical   cycle (Tv) is line/515/525/560. */
-
-#define PIX_CLOCK_TARGET	(28330000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "6.4in QVGA (LQ64D343)",
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 32,
-		.right_margin	= 800-32-640-96,
-		.upper_margin	= 32,			// line/34/34/34
-		.lower_margin	= 540-32-480-2,
-		.hsync_len	= 96,			// clk/2/96/200
-		.vsync_len	= 2,			// line/2/-/34
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
-
-	/* Logic Product Development LCD 10.4" VGA -10 */
-	/* Sharp PN LQ10D368 */
-
-#define PIX_CLOCK_TARGET	(28330000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "10.4in VGA (LQ10D368)",
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 21,
-		.right_margin	= 15,
-		.upper_margin	= 34,
-		.lower_margin	= 5,
-		.hsync_len	= 96,
-		.vsync_len	= 16,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
-
-	/* Logic Product Development LCD 12.1" SVGA -10 */
-	/* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
-
-/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
- * target clock frequency range of 35MHz to 42MHz. */
-
-/* If the target pixel clock is substantially lower than the panel
- * spec, this is done to prevent the LCD display from glitching when
- * the CPU is under load.  A pixel clock higher than 25MHz
- * (empirically determined) will compete with the CPU for bus cycles
- * for the Ethernet chip.  However, even a pixel clock of 10MHz
- * competes with Compact Flash interface during some operations
- * (fdisk, e2fsck).  And, at that speed the display may have a visible
- * flicker. */
-
-/* The full horizontal cycle (Th) is clock/832/1056/1395. */
-
-#define PIX_CLOCK_TARGET	(20000000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "12.1in SVGA (LQ121S1DG41)",
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 89,		// ns/5/-/(1/PIX_CLOCK)-10
-		.right_margin	= 1056-800-89-128,
-		.upper_margin	= 23,		// line/23/23/23
-		.lower_margin	= 44,
-		.hsync_len	= 128,		// clk/2/128/200
-		.vsync_len	= 4,		// line/2/4/6
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_HITACHI
-
-	/* Hitachi*/
-	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
-
-#define PIX_CLOCK_TARGET	(49000000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "Hitachi 800x480",
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 128,
-		.vsync_len	= 2,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-
-#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
-
-	/* AU Optotronics  A070VW01 7.0 Wide Screen color Display*/
-	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
-
-#define PIX_CLOCK_TARGET	(10000000)
-#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
-	.mode	= {
-		.name		= "7.0in Wide (A070VW01)",
-		.xres		= 480,
-		.yres		= 234,
-		.pixclock	= PIX_CLOCK,
-		.left_margin	= 30,
-		.right_margin	= 25,
-		.upper_margin	= 14,
-		.lower_margin	= 12,
-		.hsync_len	= 100,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
-			| (PIX_CLOCK_DIVIDER - 2),
-	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
-	.bpp		= 16,
-};
-
-#endif
-
-#undef NS_TO_CLOCK
-#undef CLOCK_TO_DIV
-
-#endif  /* __LCD_PANEL_H__ */
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
deleted file mode 100644
index 2901d49..0000000
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/* arch/arm/mach-lh7a40x/ssp-cpld.c
- *
- *  Copyright (C) 2004,2005 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- * SSP/SPI driver for the CardEngine CPLD.
- *
- */
-
-/* NOTES
-   -----
-
-   o *** This driver is cribbed from the 7952x implementation.
-	 Some comments may not apply.
-
-   o This driver contains sufficient logic to control either the
-     serial EEPROMs or the audio codec.  It is included in the kernel
-     to support the codec.  The EEPROMs are really the responsibility
-     of the boot loader and should probably be left alone.
-
-   o The code must be augmented to cope with multiple, simultaneous
-     clients.
-     o The audio codec writes to the codec chip whenever playback
-       starts.
-     o The touchscreen driver writes to the ads chip every time it
-       samples.
-     o The audio codec must write 16 bits, but the touch chip writes
-       are 8 bits long.
-     o We need to be able to keep these configurations separate while
-       simultaneously active.
-
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-//#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-//#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <mach/ssp.h>
-
-//#define TALK
-
-#if defined (TALK)
-#define PRINTK(f...)		printk (f)
-#else
-#define PRINTK(f...)		do {} while (0)
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
-# define CPLD_SPID		__REGP16(CPLD06_VIRT) /* SPI data */
-# define CPLD_SPIC		__REGP16(CPLD08_VIRT) /* SPI control */
-# define CPLD_SPIC_CS_CODEC	(1<<0)
-# define CPLD_SPIC_CS_TOUCH	(1<<1)
-# define CPLD_SPIC_WRITE	(0<<2)
-# define CPLD_SPIC_READ		(1<<2)
-# define CPLD_SPIC_DONE		(1<<3) /* r/o */
-# define CPLD_SPIC_LOAD		(1<<4)
-# define CPLD_SPIC_START	(1<<4)
-# define CPLD_SPIC_LOADED	(1<<5) /* r/o */
-#endif
-
-#define CPLD_SPI		__REGP16(CPLD0A_VIRT) /* SPI operation */
-#define CPLD_SPI_CS_EEPROM	(1<<3)
-#define CPLD_SPI_SCLK		(1<<2)
-#define CPLD_SPI_TX_SHIFT	(1)
-#define CPLD_SPI_TX		(1<<CPLD_SPI_TX_SHIFT)
-#define CPLD_SPI_RX_SHIFT	(0)
-#define CPLD_SPI_RX		(1<<CPLD_SPI_RX_SHIFT)
-
-/* *** FIXME: these timing values are substantially larger than the
-   *** chip requires. We may implement an nsleep () function. */
-#define T_SKH	1		/* Clock time high (us) */
-#define T_SKL	1		/* Clock time low (us) */
-#define T_CS	1		/* Minimum chip select low time (us)  */
-#define T_CSS	1		/* Minimum chip select setup time (us)  */
-#define T_DIS	1		/* Data setup time (us) */
-
-	 /* EEPROM SPI bits */
-#define P_START		(1<<9)
-#define P_WRITE		(1<<7)
-#define P_READ		(2<<7)
-#define P_ERASE		(3<<7)
-#define P_EWDS		(0<<7)
-#define P_WRAL		(0<<7)
-#define P_ERAL		(0<<7)
-#define P_EWEN		(0<<7)
-#define P_A_EWDS	(0<<5)
-#define P_A_WRAL	(1<<5)
-#define P_A_ERAL	(2<<5)
-#define P_A_EWEN	(3<<5)
-
-struct ssp_configuration {
-	int device;
-	int mode;
-	int speed;
-	int frame_size_write;
-	int frame_size_read;
-};
-
-static struct ssp_configuration ssp_configuration;
-static spinlock_t ssp_lock;
-
-static void enable_cs (void)
-{
-	switch (ssp_configuration.device) {
-	case DEVICE_EEPROM:
-		CPLD_SPI |= CPLD_SPI_CS_EEPROM;
-		break;
-	}
-	udelay (T_CSS);
-}
-
-static void disable_cs (void)
-{
-	switch (ssp_configuration.device) {
-	case DEVICE_EEPROM:
-		CPLD_SPI &= ~CPLD_SPI_CS_EEPROM;
-		break;
-	}
-	udelay (T_CS);
-}
-
-static void pulse_clock (void)
-{
-	CPLD_SPI |=  CPLD_SPI_SCLK;
-	udelay (T_SKH);
-	CPLD_SPI &= ~CPLD_SPI_SCLK;
-	udelay (T_SKL);
-}
-
-
-/* execute_spi_command
-
-   sends an spi command to a device.  It first sends cwrite bits from
-   v.  If cread is greater than zero it will read cread bits
-   (discarding the leading 0 bit) and return them.  If cread is less
-   than zero it will check for completetion status and return 0 on
-   success or -1 on timeout.  If cread is zero it does nothing other
-   than sending the command.
-
-   On the LPD7A400, we can only read or write multiples of 8 bits on
-   the codec and the touch screen device.  Here, we round up.
-
-*/
-
-static int execute_spi_command (int v, int cwrite, int cread)
-{
-	unsigned long l = 0;
-
-#if defined (CONFIG_MACH_LPD7A400)
-	/* The codec and touch devices cannot be bit-banged.  Instead,
-	 * the CPLD provides an eight-bit shift register and a crude
-	 * interface.  */
-	if (   ssp_configuration.device == DEVICE_CODEC
-	    || ssp_configuration.device == DEVICE_TOUCH) {
-		int select = 0;
-
-		PRINTK ("spi(%d %d.%d) 0x%04x",
-			ssp_configuration.device, cwrite, cread,
-			v);
-#if defined (TALK)
-		if (ssp_configuration.device == DEVICE_CODEC)
-			PRINTK (" 0x%03x -> %2d", v & 0x1ff, (v >> 9) & 0x7f);
-#endif
-		PRINTK ("\n");
-
-		if (ssp_configuration.device == DEVICE_CODEC)
-			select = CPLD_SPIC_CS_CODEC;
-		if (ssp_configuration.device == DEVICE_TOUCH)
-			select = CPLD_SPIC_CS_TOUCH;
-		if (cwrite) {
-			for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) {
-				CPLD_SPID = (v >> (8*cwrite)) & 0xff;
-				CPLD_SPIC = select | CPLD_SPIC_LOAD;
-				while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
-					;
-				CPLD_SPIC = select;
-				while (!(CPLD_SPIC & CPLD_SPIC_DONE))
-					;
-			}
-			v = 0;
-		}
-		if (cread) {
-			mdelay (2);	/* *** FIXME: required by ads7843? */
-			v = 0;
-			for (cread = (cread + 7)/8; cread-- > 0;) {
-				CPLD_SPID = 0;
-				CPLD_SPIC = select | CPLD_SPIC_READ
-					| CPLD_SPIC_START;
-				while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
-					;
-				CPLD_SPIC = select | CPLD_SPIC_READ;
-				while (!(CPLD_SPIC & CPLD_SPIC_DONE))
-					;
-				v = (v << 8) | CPLD_SPID;
-			}
-		}
-		return v;
-	}
-#endif
-
-	PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device,
-		v & 0x1ff, (v >> 9) & 0x7f);
-
-	enable_cs ();
-
-	v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */
-	while (cwrite--) {
-		CPLD_SPI
-			= (CPLD_SPI & ~CPLD_SPI_TX)
-			| ((v >> cwrite) & CPLD_SPI_TX);
-		udelay (T_DIS);
-		pulse_clock ();
-	}
-
-	if (cread < 0) {
-		int delay = 10;
-		disable_cs ();
-		udelay (1);
-		enable_cs ();
-
-		l = -1;
-		do {
-			if (CPLD_SPI & CPLD_SPI_RX) {
-				l = 0;
-				break;
-			}
-		} while (udelay (1), --delay);
-	}
-	else
-	/* We pulse the clock before the data to skip the leading zero. */
-		while (cread-- > 0) {
-			pulse_clock ();
-			l = (l<<1)
-				| (((CPLD_SPI & CPLD_SPI_RX)
-				    >> CPLD_SPI_RX_SHIFT) & 0x1);
-		}
-
-	disable_cs ();
-	return l;
-}
-
-static int ssp_init (void)
-{
-	spin_lock_init (&ssp_lock);
-	memset (&ssp_configuration, 0, sizeof (ssp_configuration));
-	return 0;
-}
-
-
-/* ssp_chip_select
-
-   drops the chip select line for the CPLD shift-register controlled
-   devices.  It doesn't enable chip
-
-*/
-
-static void ssp_chip_select (int enable)
-{
-#if defined (CONFIG_MACH_LPD7A400)
-	int select;
-
-	if (ssp_configuration.device == DEVICE_CODEC)
-		select = CPLD_SPIC_CS_CODEC;
-	else if (ssp_configuration.device == DEVICE_TOUCH)
-		select = CPLD_SPIC_CS_TOUCH;
-	else
-		return;
-
-	if (enable)
-		CPLD_SPIC = select;
-	else
-		CPLD_SPIC = 0;
-#endif
-}
-
-static void ssp_acquire (void)
-{
-	spin_lock (&ssp_lock);
-}
-
-static void ssp_release (void)
-{
-	ssp_chip_select (0);	/* just in case */
-	spin_unlock (&ssp_lock);
-}
-
-static int ssp_configure (int device, int mode, int speed,
-			   int frame_size_write, int frame_size_read)
-{
-	ssp_configuration.device		= device;
-	ssp_configuration.mode			= mode;
-	ssp_configuration.speed			= speed;
-	ssp_configuration.frame_size_write	= frame_size_write;
-	ssp_configuration.frame_size_read	= frame_size_read;
-
-	return 0;
-}
-
-static int ssp_read (void)
-{
-	return execute_spi_command (0, 0, ssp_configuration.frame_size_read);
-}
-
-static int ssp_write (u16 data)
-{
-	execute_spi_command (data, ssp_configuration.frame_size_write, 0);
-	return 0;
-}
-
-static int ssp_write_read (u16 data)
-{
-	return execute_spi_command (data, ssp_configuration.frame_size_write,
-				    ssp_configuration.frame_size_read);
-}
-
-struct ssp_driver lh7a40x_cpld_ssp_driver = {
-	.init		= ssp_init,
-	.acquire	= ssp_acquire,
-	.release	= ssp_release,
-	.configure	= ssp_configure,
-	.chip_select	= ssp_chip_select,
-	.read		= ssp_read,
-	.write		= ssp_write,
-	.write_read	= ssp_write_read,
-};
-
-
-MODULE_AUTHOR("Marc Singer");
-MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
deleted file mode 100644
index 4601e425..0000000
--- a/arch/arm/mach-lh7a40x/time.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-lh7a40x/time.c
- *
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-
-#include <asm/mach/time.h>
-#include "common.h"
-
-#if HZ < 100
-# define TIMER_CONTROL	TIMER_CONTROL2
-# define TIMER_LOAD	TIMER_LOAD2
-# define TIMER_CONSTANT	(508469/HZ)
-# define TIMER_MODE	(TIMER_C_ENABLE | TIMER_C_PERIODIC | TIMER_C_508KHZ)
-# define TIMER_EOI	TIMER_EOI2
-# define TIMER_IRQ	IRQ_T2UI
-#else
-# define TIMER_CONTROL	TIMER_CONTROL3
-# define TIMER_LOAD	TIMER_LOAD3
-# define TIMER_CONSTANT	(3686400/HZ)
-# define TIMER_MODE	(TIMER_C_ENABLE | TIMER_C_PERIODIC)
-# define TIMER_EOI	TIMER_EOI3
-# define TIMER_IRQ	IRQ_T3UI
-#endif
-
-static irqreturn_t
-lh7a40x_timer_interrupt(int irq, void *dev_id)
-{
-	TIMER_EOI = 0;
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction lh7a40x_timer_irq = {
-	.name		= "LHA740x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= lh7a40x_timer_interrupt,
-};
-
-static void __init lh7a40x_timer_init (void)
-{
-				/* Stop/disable all timers */
-	TIMER_CONTROL1 = 0;
-	TIMER_CONTROL2 = 0;
-	TIMER_CONTROL3 = 0;
-
-	setup_irq (TIMER_IRQ, &lh7a40x_timer_irq);
-
-	TIMER_LOAD = TIMER_CONSTANT;
-	TIMER_CONTROL = TIMER_MODE;
-}
-
-struct sys_timer lh7a40x_timer = {
-	.init		= &lh7a40x_timer_init,
-};
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index ee74791..68d48ab 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -206,68 +206,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define RPC_LSA_DEFAULT		RPC_LED_TX_RX
 #define RPC_LSB_DEFAULT		RPC_LED_100_10
 
-#elif   defined(CONFIG_MACH_LPD79520) ||	\
-	defined(CONFIG_MACH_LPD7A400) ||	\
-	defined(CONFIG_MACH_LPD7A404)
-
-/* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the
- * way that the CPU handles chip selects and the way that the SMC chip
- * expects the chip select to operate.  Refer to
- * Documentation/arm/Sharp-LH/IOBarrier for details.  The read from
- * IOBARRIER is a byte, in order that we read the least-common
- * denominator.  It would be wasteful to read 32 bits from an 8-bit
- * accessible region.
- *
- * There is no explicit protection against interrupts intervening
- * between the writew and the IOBARRIER.  In SMC ISR there is a
- * preamble that performs an IOBARRIER in the extremely unlikely event
- * that the driver interrupts itself between a writew to the chip an
- * the IOBARRIER that follows *and* the cache is large enough that the
- * first off-chip access while handing the interrupt is to the SMC
- * chip.  Other devices in the same address space as the SMC chip must
- * be aware of the potential for trouble and perform a similar
- * IOBARRIER on entry to their ISR.
- */
-
-#include <mach/constants.h>	/* IOBARRIER_VIRT */
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		0
-#define LPD7X_IOBARRIER		readb (IOBARRIER_VIRT)
-
-#define SMC_inw(a,r)\
-   ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; })
-#define SMC_outw(v,a,r)	  ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; })
-
-#define SMC_insw		LPD7_SMC_insw
-static inline void LPD7_SMC_insw (unsigned char* a, int r,
-				  unsigned char* p, int l)
-{
-	unsigned short* ps = (unsigned short*) p;
-	while (l-- > 0) {
-		*ps++ = readw (a + r);
-		LPD7X_IOBARRIER;
-	}
-}
-
-#define SMC_outsw		LPD7_SMC_outsw
-static inline void LPD7_SMC_outsw (unsigned char* a, int r,
-				   unsigned char* p, int l)
-{
-	unsigned short* ps = (unsigned short*) p;
-	while (l-- > 0) {
-		writew (*ps++, a + r);
-		LPD7X_IOBARRIER;
-	}
-}
-
-#define SMC_INTERRUPT_PREAMBLE	LPD7X_IOBARRIER
-
-#define RPC_LSA_DEFAULT		RPC_LED_TX_RX
-#define RPC_LSB_DEFAULT		RPC_LED_100_10
-
 #elif	defined(CONFIG_ARCH_VERSATILE)
 
 #define SMC_CAN_USE_8BIT	1
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d9ccbf8..e461be1 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE
 	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
-config SERIAL_LH7A40X
-	tristate "Sharp LH7A40X embedded UART support"
-	depends on ARM && ARCH_LH7A40X
-	select SERIAL_CORE
-	help
-	  This enables support for the three on-board UARTs of the
-	  Sharp LH7A40X series CPUs.  Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
-	bool "Support for console on Sharp LH7A40X serial port"
-	depends on SERIAL_LH7A40X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use one of the serial ports as the
-	  system console--the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode.
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the default system console, but
-	  you can alter that using a kernel command line, for example
-	  "console=ttyAM1".
-
 config SERIAL_CPM
 	tristate "CPM SCC/SMC serial port support"
 	depends on CPM2 || 8xx
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d94dc00..31e868c 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
-obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c
deleted file mode 100644
index ea74470..0000000
--- a/drivers/tty/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/* drivers/serial/serial_lh7a40x.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* Driver for Sharp LH7A40X embedded serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd.
- *
- *  ---
- *
- * This driver supports the embedded UARTs of the Sharp LH7A40X series
- * CPUs.  While similar to the 16550 and other UART chips, there is
- * nothing close to register compatibility.  Moreover, some of the
- * modem control lines are not available, either in the chip or they
- * are lacking in the board-level implementation.
- *
- * - Use of SIRDIS
- *   For simplicity, we disable the IR functions of any UART whenever
- *   we enable it.
- *
- */
-
-
-#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#define DEV_MAJOR	204
-#define DEV_MINOR	16
-#define DEV_NR		3
-
-#define ISR_LOOP_LIMIT	256
-
-#define UR(p,o)	_UR ((p)->membase, o)
-#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o))))
-#define BIT_CLR(p,o,m)	UR(p,o) = UR(p,o) & (~(unsigned int)m)
-#define BIT_SET(p,o,m)	UR(p,o) = UR(p,o) | ( (unsigned int)m)
-
-#define UART_REG_SIZE	32
-
-#define UART_R_DATA	(0x00)
-#define UART_R_FCON	(0x04)
-#define UART_R_BRCON	(0x08)
-#define UART_R_CON	(0x0c)
-#define UART_R_STATUS	(0x10)
-#define UART_R_RAWISR	(0x14)
-#define UART_R_INTEN	(0x18)
-#define UART_R_ISR	(0x1c)
-
-#define UARTEN		(0x01)		/* UART enable */
-#define SIRDIS		(0x02)		/* Serial IR disable (UART1 only) */
-
-#define RxEmpty		(0x10)
-#define TxEmpty		(0x80)
-#define TxFull		(0x20)
-#define nRxRdy		RxEmpty
-#define nTxRdy		TxFull
-#define TxBusy		(0x08)
-
-#define RxBreak		(0x0800)
-#define RxOverrunError	(0x0400)
-#define RxParityError	(0x0200)
-#define RxFramingError	(0x0100)
-#define RxError     (RxBreak | RxOverrunError | RxParityError | RxFramingError)
-
-#define DCD		(0x04)
-#define DSR		(0x02)
-#define CTS		(0x01)
-
-#define RxInt		(0x01)
-#define TxInt		(0x02)
-#define ModemInt	(0x04)
-#define RxTimeoutInt	(0x08)
-
-#define MSEOI		(0x10)
-
-#define WLEN_8		(0x60)
-#define WLEN_7		(0x40)
-#define WLEN_6		(0x20)
-#define WLEN_5		(0x00)
-#define WLEN		(0x60)	/* Mask for all word-length bits */
-#define STP2		(0x08)
-#define PEN		(0x02)	/* Parity Enable */
-#define EPS		(0x04)	/* Even Parity Set */
-#define FEN		(0x10)	/* FIFO Enable */
-#define BRK		(0x01)	/* Send Break */
-
-
-struct uart_port_lh7a40x {
-	struct uart_port port;
-	unsigned int statusPrev; /* Most recently read modem status */
-};
-
-static void lh7a40xuart_stop_tx (struct uart_port* port)
-{
-	BIT_CLR (port, UART_R_INTEN, TxInt);
-}
-
-static void lh7a40xuart_start_tx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, TxInt);
-
-	/* *** FIXME: do I need to check for startup of the
-		      transmitter?  The old driver did, but AMBA
-		      doesn't . */
-}
-
-static void lh7a40xuart_stop_rx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-}
-
-static void lh7a40xuart_enable_ms (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, ModemInt);
-}
-
-static void lh7a40xuart_rx_chars (struct uart_port* port)
-{
-	struct tty_struct* tty = port->state->port.tty;
-	int cbRxMax = 256;	/* (Gross) limit on receive */
-	unsigned int data;	/* Received data and status */
-	unsigned int flag;
-
-	while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
-		data = UR (port, UART_R_DATA);
-		flag = TTY_NORMAL;
-		++port->icount.rx;
-
-		if (unlikely(data & RxError)) {
-			if (data & RxBreak) {
-				data &= ~(RxFramingError | RxParityError);
-				++port->icount.brk;
-				if (uart_handle_break (port))
-					continue;
-			}
-			else if (data & RxParityError)
-				++port->icount.parity;
-			else if (data & RxFramingError)
-				++port->icount.frame;
-			if (data & RxOverrunError)
-				++port->icount.overrun;
-
-				/* Mask by termios, leave Rx'd byte */
-			data &= port->read_status_mask | 0xff;
-
-			if (data & RxBreak)
-				flag = TTY_BREAK;
-			else if (data & RxParityError)
-				flag = TTY_PARITY;
-			else if (data & RxFramingError)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char (port, (unsigned char) data))
-			continue;
-
-		uart_insert_char(port, data, RxOverrunError, data, flag);
-	}
-	tty_flip_buffer_push (tty);
-	return;
-}
-
-static void lh7a40xuart_tx_chars (struct uart_port* port)
-{
-	struct circ_buf* xmit = &port->state->xmit;
-	int cbTxMax = port->fifosize;
-
-	if (port->x_char) {
-		UR (port, UART_R_DATA) = port->x_char;
-		++port->icount.tx;
-		port->x_char = 0;
-		return;
-	}
-	if (uart_circ_empty (xmit) || uart_tx_stopped (port)) {
-		lh7a40xuart_stop_tx (port);
-		return;
-	}
-
-	/* Unlike the AMBA UART, the lh7a40x UART does not guarantee
-	   that at least half of the FIFO is empty.  Instead, we check
-	   status for every character.  Using the AMBA method causes
-	   the transmitter to drop characters. */
-
-	do {
-		UR (port, UART_R_DATA) = xmit->buf[xmit->tail];
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		++port->icount.tx;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (!(UR (port, UART_R_STATUS) & nTxRdy)
-		 && cbTxMax--);
-
-	if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-		uart_write_wakeup (port);
-
-	if (uart_circ_empty (xmit))
-		lh7a40xuart_stop_tx (port);
-}
-
-static void lh7a40xuart_modem_status (struct uart_port* port)
-{
-	unsigned int status = UR (port, UART_R_STATUS);
-	unsigned int delta
-		= status ^ ((struct uart_port_lh7a40x*) port)->statusPrev;
-
-	BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */
-
-	if (!delta)		/* Only happens if we missed 2 transitions */
-		return;
-
-	((struct uart_port_lh7a40x*) port)->statusPrev = status;
-
-	if (delta & DCD)
-		uart_handle_dcd_change (port, status & DCD);
-
-	if (delta & DSR)
-		++port->icount.dsr;
-
-	if (delta & CTS)
-		uart_handle_cts_change (port, status & CTS);
-
-	wake_up_interruptible (&port->state->port.delta_msr_wait);
-}
-
-static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
-{
-	struct uart_port* port = dev_id;
-	unsigned int cLoopLimit = ISR_LOOP_LIMIT;
-	unsigned int isr = UR (port, UART_R_ISR);
-
-
-	do {
-		if (isr & (RxInt | RxTimeoutInt))
-			lh7a40xuart_rx_chars(port);
-		if (isr & ModemInt)
-			lh7a40xuart_modem_status (port);
-		if (isr & TxInt)
-			lh7a40xuart_tx_chars (port);
-
-		if (--cLoopLimit == 0)
-			break;
-
-		isr = UR (port, UART_R_ISR);
-	} while (isr & (RxInt | TxInt | RxTimeoutInt));
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int lh7a40xuart_tx_empty (struct uart_port* port)
-{
-	return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port)
-{
-	unsigned int result = 0;
-	unsigned int status = UR (port, UART_R_STATUS);
-
-	if (status & DCD)
-		result |= TIOCM_CAR;
-	if (status & DSR)
-		result |= TIOCM_DSR;
-	if (status & CTS)
-		result |= TIOCM_CTS;
-
-	return result;
-}
-
-static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
-{
-	/* None of the ports supports DTR. UART1 supports RTS through GPIO. */
-	/* Note, kernel appears to be setting DTR and RTS on console. */
-
-	/* *** FIXME: this deserves more work.  There's some work in
-	       tracing all of the IO pins. */
-#if 0
-	if( port->mapbase == UART1_PHYS) {
-		gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
-
-		if (mctrl & TIOCM_RTS)
-			gpio->pbdr &= ~GPIOB_UART1_RTS;
-		else
-			gpio->pbdr |= GPIOB_UART1_RTS;
-	}
-#endif
-}
-
-static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (break_state == -1)
-		BIT_SET (port, UART_R_FCON, BRK); /* Assert break */
-	else
-		BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int lh7a40xuart_startup (struct uart_port* port)
-{
-	int retval;
-
-	retval = request_irq (port->irq, lh7a40xuart_int, 0,
-			      "serial_lh7a40x", port);
-	if (retval)
-		return retval;
-
-				/* Initial modem control-line settings */
-	((struct uart_port_lh7a40x*) port)->statusPrev
-		= UR (port, UART_R_STATUS);
-
-	/* There is presently no configuration option to enable IR.
-	   Thus, we always disable it. */
-
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS);
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-
-	return 0;
-}
-
-static void lh7a40xuart_shutdown (struct uart_port* port)
-{
-	free_irq (port->irq, port);
-	BIT_CLR (port, UART_R_FCON, BRK | FEN);
-	BIT_CLR (port, UART_R_CON, UARTEN);
-}
-
-static void lh7a40xuart_set_termios (struct uart_port* port,
-				     struct ktermios* termios,
-				     struct ktermios* old)
-{
-	unsigned int con;
-	unsigned int inten;
-	unsigned int fcon;
-	unsigned long flags;
-	unsigned int baud;
-	unsigned int quot;
-
-	baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16);
-	quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		fcon = WLEN_5;
-		break;
-	case CS6:
-		fcon = WLEN_6;
-		break;
-	case CS7:
-		fcon = WLEN_7;
-		break;
-	case CS8:
-	default:
-		fcon = WLEN_8;
-		break;
-	}
-	if (termios->c_cflag & CSTOPB)
-		fcon |= STP2;
-	if (termios->c_cflag & PARENB) {
-		fcon |= PEN;
-		if (!(termios->c_cflag & PARODD))
-			fcon |= EPS;
-	}
-	if (port->fifosize > 1)
-		fcon |= FEN;
-
-	spin_lock_irqsave (&port->lock, flags);
-
-	uart_update_timeout (port, termios->c_cflag, baud);
-
-	port->read_status_mask = RxOverrunError;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= RxBreak;
-
-		/* Figure mask for status we ignore */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= RxBreak;
-		/* Ignore overrun when ignorning parity */
-		/* *** FIXME: is this in the right place? */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= RxOverrunError;
-	}
-
-		/* Ignore all receive errors when receive disabled */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= RxError;
-
-	con   = UR (port, UART_R_CON);
-	inten = (UR (port, UART_R_INTEN) & ~ModemInt);
-
-	if (UART_ENABLE_MS (port, termios->c_cflag))
-		inten |= ModemInt;
-
-	BIT_CLR (port, UART_R_CON, UARTEN);	/* Disable UART */
-	UR (port, UART_R_INTEN) = 0;		/* Disable interrupts */
-	UR (port, UART_R_BRCON) = quot - 1;	/* Set baud rate divisor */
-	UR (port, UART_R_FCON)  = fcon;		/* Set FIFO and frame ctrl */
-	UR (port, UART_R_INTEN) = inten;	/* Enable interrupts */
-	UR (port, UART_R_CON)   = con;		/* Restore UART mode */
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char* lh7a40xuart_type (struct uart_port* port)
-{
-	return port->type == PORT_LH7A40X ? "LH7A40X" : NULL;
-}
-
-static void lh7a40xuart_release_port (struct uart_port* port)
-{
-	release_mem_region (port->mapbase, UART_REG_SIZE);
-}
-
-static int lh7a40xuart_request_port (struct uart_port* port)
-{
-	return request_mem_region (port->mapbase, UART_REG_SIZE,
-				   "serial_lh7a40x") != NULL
-		? 0 : -EBUSY;
-}
-
-static void lh7a40xuart_config_port (struct uart_port* port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE) {
-		port->type = PORT_LH7A40X;
-		lh7a40xuart_request_port (port);
-	}
-}
-
-static int lh7a40xuart_verify_port (struct uart_port* port,
-				    struct serial_struct* ser)
-{
-	int ret = 0;
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
-		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
-		ret = -EINVAL;
-	if (ser->baud_base < 9600) /* *** FIXME: is this true? */
-		ret = -EINVAL;
-	return ret;
-}
-
-static struct uart_ops lh7a40x_uart_ops = {
-	.tx_empty	= lh7a40xuart_tx_empty,
-	.set_mctrl	= lh7a40xuart_set_mctrl,
-	.get_mctrl	= lh7a40xuart_get_mctrl,
-	.stop_tx	= lh7a40xuart_stop_tx,
-	.start_tx	= lh7a40xuart_start_tx,
-	.stop_rx	= lh7a40xuart_stop_rx,
-	.enable_ms	= lh7a40xuart_enable_ms,
-	.break_ctl	= lh7a40xuart_break_ctl,
-	.startup	= lh7a40xuart_startup,
-	.shutdown	= lh7a40xuart_shutdown,
-	.set_termios	= lh7a40xuart_set_termios,
-	.type		= lh7a40xuart_type,
-	.release_port	= lh7a40xuart_release_port,
-	.request_port	= lh7a40xuart_request_port,
-	.config_port	= lh7a40xuart_config_port,
-	.verify_port	= lh7a40xuart_verify_port,
-};
-
-static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART1_PHYS),
-			.mapbase	= UART1_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART1INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART2_PHYS),
-			.mapbase	= UART2_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART2INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART3_PHYS),
-			.mapbase	= UART3_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART3INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		},
-	},
-};
-
-#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE
-# define LH7A40X_CONSOLE NULL
-#else
-# define LH7A40X_CONSOLE &lh7a40x_console
-
-static void lh7a40xuart_console_putchar(struct uart_port *port, int ch)
-{
-	while (UR(port, UART_R_STATUS) & nTxRdy)
-		;
-	UR(port, UART_R_DATA) = ch;
-}
-
-static void lh7a40xuart_console_write (struct console* co,
-				       const char* s,
-				       unsigned int count)
-{
-	struct uart_port* port = &lh7a40x_ports[co->index].port;
-	unsigned int con = UR (port, UART_R_CON);
-	unsigned int inten = UR (port, UART_R_INTEN);
-
-
-	UR (port, UART_R_INTEN) = 0;		/* Disable all interrupts */
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
-
-	uart_console_write(port, s, count, lh7a40xuart_console_putchar);
-
-				/* Wait until all characters are sent */
-	while (UR (port, UART_R_STATUS) & TxBusy)
-		;
-
-				/* Restore control and interrupt mask */
-	UR (port, UART_R_CON) = con;
-	UR (port, UART_R_INTEN) = inten;
-}
-
-static void __init lh7a40xuart_console_get_options (struct uart_port* port,
-						    int* baud,
-						    int* parity,
-						    int* bits)
-{
-	if (UR (port, UART_R_CON) & UARTEN) {
-		unsigned int fcon = UR (port, UART_R_FCON);
-		unsigned int quot = UR (port, UART_R_BRCON) + 1;
-
-		switch (fcon & (PEN | EPS)) {
-		default:        *parity = 'n'; break;
-		case PEN:       *parity = 'o'; break;
-		case PEN | EPS: *parity = 'e'; break;
-		}
-
-		switch (fcon & WLEN) {
-		default:
-		case WLEN_8: *bits = 8; break;
-		case WLEN_7: *bits = 7; break;
-		case WLEN_6: *bits = 6; break;
-		case WLEN_5: *bits = 5; break;
-		}
-
-		*baud = port->uartclk/(16*quot);
-	}
-}
-
-static int __init lh7a40xuart_console_setup (struct console* co, char* options)
-{
-	struct uart_port* port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index >= DEV_NR) /* Bounds check on device number */
-		co->index = 0;
-	port = &lh7a40x_ports[co->index].port;
-
-	if (options)
-		uart_parse_options (options, &baud, &parity, &bits, &flow);
-	else
-		lh7a40xuart_console_get_options (port, &baud, &parity, &bits);
-
-	return uart_set_options (port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver lh7a40x_reg;
-static struct console lh7a40x_console = {
-	.name		= "ttyAM",
-	.write		= lh7a40xuart_console_write,
-	.device		= uart_console_device,
-	.setup		= lh7a40xuart_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &lh7a40x_reg,
-};
-
-static int __init lh7a40xuart_console_init(void)
-{
-	register_console (&lh7a40x_console);
-	return 0;
-}
-
-console_initcall (lh7a40xuart_console_init);
-
-#endif
-
-static struct uart_driver lh7a40x_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyAM",
-	.dev_name		= "ttyAM",
-	.major			= DEV_MAJOR,
-	.minor			= DEV_MINOR,
-	.nr			= DEV_NR,
-	.cons			= LH7A40X_CONSOLE,
-};
-
-static int __init lh7a40xuart_init(void)
-{
-	int ret;
-
-	printk (KERN_INFO "serial: LH7A40X serial driver\n");
-
-	ret = uart_register_driver (&lh7a40x_reg);
-
-	if (ret == 0) {
-		int i;
-
-		for (i = 0; i < DEV_NR; i++) {
-			/* UART3, when used, requires GPIO pin reallocation */
-			if (lh7a40x_ports[i].port.mapbase == UART3_PHYS)
-				GPIO_PINMUX |= 1<<3;
-			uart_add_one_port (&lh7a40x_reg,
-					   &lh7a40x_ports[i].port);
-		}
-	}
-	return ret;
-}
-
-static void __exit lh7a40xuart_exit(void)
-{
-	int i;
-
-	for (i = 0; i < DEV_NR; i++)
-		uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port);
-
-	uart_unregister_driver (&lh7a40x_reg);
-}
-
-module_init (lh7a40xuart_init);
-module_exit (lh7a40xuart_exit);
-
-MODULE_AUTHOR ("Marc Singer");
-MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index fceea5e..41b6e51 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -31,7 +31,6 @@ config USB_ARCH_HAS_OHCI
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
 	default y if PXA3xx
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bfde50e..bc5123c 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -188,18 +188,6 @@ config USB_FUSB300
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_LH7A40X
-	boolean "LH7A40X"
-	depends on ARCH_LH7A40X
-	help
-	   This driver provides USB Device Controller driver for LH7A40x
-
-config USB_LH7A40X
-	tristate
-	depends on USB_GADGET_LH7A40X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 305286e..1ea15ee 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_IMX)		+= imx_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
-obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
 obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5c2720d..e896f635 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -45,12 +45,6 @@
 #define	gadget_is_goku(g)	0
 #endif
 
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define	gadget_is_lh7a40x(g)	!strcmp("lh7a40x_udc", (g)->name)
-#else
-#define	gadget_is_lh7a40x(g)	0
-#endif
-
 #ifdef CONFIG_USB_GADGET_OMAP
 #define	gadget_is_omap(g)	!strcmp("omap_udc", (g)->name)
 #else
@@ -181,8 +175,6 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x06;
 	else if (gadget_is_omap(gadget))
 		return 0x08;
-	else if (gadget_is_lh7a40x(gadget))
-		return 0x09;
 	else if (gadget_is_pxa27x(gadget))
 		return 0x11;
 	else if (gadget_is_s3c2410(gadget))
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
deleted file mode 100644
index 6b58bd8..0000000
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*
- * linux/drivers/usb/gadget/lh7a40x_udc.c
- * Sharp LH7A40x on-chip full speed USB device controllers
- *
- * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
- * Copyright (C) 2004 Bo Henriksen, Nordic ID
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "lh7a40x_udc.h"
-
-//#define DEBUG printk
-//#define DEBUG_EP0 printk
-//#define DEBUG_SETUP printk
-
-#ifndef DEBUG_EP0
-# define DEBUG_EP0(fmt,args...)
-#endif
-#ifndef DEBUG_SETUP
-# define DEBUG_SETUP(fmt,args...)
-#endif
-#ifndef DEBUG
-# define NO_STATES
-# define DEBUG(fmt,args...)
-#endif
-
-#define	DRIVER_DESC			"LH7A40x USB Device Controller"
-#define	DRIVER_VERSION		__DATE__
-
-#ifndef _BIT			/* FIXME - what happended to _BIT in 2.6.7bk18? */
-#define _BIT(x) (1<<(x))
-#endif
-
-struct lh7a40x_udc *the_controller;
-
-static const char driver_name[] = "lh7a40x_udc";
-static const char driver_desc[] = DRIVER_DESC;
-static const char ep0name[] = "ep0-control";
-
-/*
-  Local definintions.
-*/
-
-#ifndef NO_STATES
-static char *state_names[] = {
-	"WAIT_FOR_SETUP",
-	"DATA_STATE_XMIT",
-	"DATA_STATE_NEED_ZLP",
-	"WAIT_FOR_OUT_STATUS",
-	"DATA_STATE_RECV"
-};
-#endif
-
-/*
-  Local declarations.
-*/
-static int lh7a40x_ep_enable(struct usb_ep *ep,
-			     const struct usb_endpoint_descriptor *);
-static int lh7a40x_ep_disable(struct usb_ep *ep);
-static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t);
-static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
-static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t);
-static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
-static int lh7a40x_set_halt(struct usb_ep *ep, int);
-static int lh7a40x_fifo_status(struct usb_ep *ep);
-static void lh7a40x_fifo_flush(struct usb_ep *ep);
-static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
-static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
-
-static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req,
-		 int status);
-static void pio_irq_enable(int bEndpointAddress);
-static void pio_irq_disable(int bEndpointAddress);
-static void stop_activity(struct lh7a40x_udc *dev,
-			  struct usb_gadget_driver *driver);
-static void flush(struct lh7a40x_ep *ep);
-static void udc_enable(struct lh7a40x_udc *dev);
-static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address);
-
-static struct usb_ep_ops lh7a40x_ep_ops = {
-	.enable = lh7a40x_ep_enable,
-	.disable = lh7a40x_ep_disable,
-
-	.alloc_request = lh7a40x_alloc_request,
-	.free_request = lh7a40x_free_request,
-
-	.queue = lh7a40x_queue,
-	.dequeue = lh7a40x_dequeue,
-
-	.set_halt = lh7a40x_set_halt,
-	.fifo_status = lh7a40x_fifo_status,
-	.fifo_flush = lh7a40x_fifo_flush,
-};
-
-/* Inline code */
-
-static __inline__ int write_packet(struct lh7a40x_ep *ep,
-				   struct lh7a40x_request *req, int max)
-{
-	u8 *buf;
-	int length, count;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	buf = req->req.buf + req->req.actual;
-	prefetch(buf);
-
-	length = req->req.length - req->req.actual;
-	length = min(length, max);
-	req->req.actual += length;
-
-	DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo);
-
-	count = length;
-	while (count--) {
-		*fifo = *buf++;
-	}
-
-	return length;
-}
-
-static __inline__ void usb_set_index(u32 ep)
-{
-	*(volatile u32 *)io_p2v(USB_INDEX) = ep;
-}
-
-static __inline__ u32 usb_read(u32 port)
-{
-	return *(volatile u32 *)io_p2v(port);
-}
-
-static __inline__ void usb_write(u32 val, u32 port)
-{
-	*(volatile u32 *)io_p2v(port) = val;
-}
-
-static __inline__ void usb_set(u32 val, u32 port)
-{
-	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
-	u32 after = (*ioport) | val;
-	*ioport = after;
-}
-
-static __inline__ void usb_clear(u32 val, u32 port)
-{
-	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
-	u32 after = (*ioport) & ~val;
-	*ioport = after;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define GPIO_PORTC_DR 	(0x80000E08)
-#define GPIO_PORTC_DDR 	(0x80000E18)
-#define GPIO_PORTC_PDR 	(0x80000E70)
-
-/* get port C pin data register */
-#define get_portc_pdr(bit) 		((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0)
-/* get port C data direction register */
-#define get_portc_ddr(bit) 		((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0)
-/* set port C data register */
-#define set_portc_dr(bit, val) 	(val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR))
-/* set port C data direction register */
-#define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR))
-
-/*
- * LPD7A404 GPIO's:
- * Port C bit 1 = USB Port 1 Power Enable
- * Port C bit 2 = USB Port 1 Data Carrier Detect
- */
-#define is_usb_connected() 		get_portc_pdr(2)
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-
-static const char proc_node_name[] = "driver/udc";
-
-static int
-udc_proc_read(char *page, char **start, off_t off, int count,
-	      int *eof, void *_dev)
-{
-	char *buf = page;
-	struct lh7a40x_udc *dev = _dev;
-	char *next = buf;
-	unsigned size = count;
-	unsigned long flags;
-	int t;
-
-	if (off != 0)
-		return 0;
-
-	local_irq_save(flags);
-
-	/* basic device status */
-	t = scnprintf(next, size,
-		      DRIVER_DESC "\n"
-		      "%s version: %s\n"
-		      "Gadget driver: %s\n"
-		      "Host: %s\n\n",
-		      driver_name, DRIVER_VERSION,
-		      dev->driver ? dev->driver->driver.name : "(none)",
-		      is_usb_connected()? "full speed" : "disconnected");
-	size -= t;
-	next += t;
-
-	t = scnprintf(next, size,
-		      "GPIO:\n"
-		      " Port C bit 1: %d, dir %d\n"
-		      " Port C bit 2: %d, dir %d\n\n",
-		      get_portc_pdr(1), get_portc_ddr(1),
-		      get_portc_pdr(2), get_portc_ddr(2)
-	    );
-	size -= t;
-	next += t;
-
-	t = scnprintf(next, size,
-		      "DCP pullup: %d\n\n",
-		      (usb_read(USB_PM) & PM_USB_DCP) != 0);
-	size -= t;
-	next += t;
-
-	local_irq_restore(flags);
-	*eof = 1;
-	return count - size;
-}
-
-#define create_proc_files() 	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
-#define remove_proc_files() 	remove_proc_entry(proc_node_name, NULL)
-
-#else	/* !CONFIG_USB_GADGET_DEBUG_FILES */
-
-#define create_proc_files() do {} while (0)
-#define remove_proc_files() do {} while (0)
-
-#endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
-
-/*
- * 	udc_disable - disable USB device controller
- */
-static void udc_disable(struct lh7a40x_udc *dev)
-{
-	DEBUG("%s, %p\n", __func__, dev);
-
-	udc_set_address(dev, 0);
-
-	/* Disable interrupts */
-	usb_write(0, USB_IN_INT_EN);
-	usb_write(0, USB_OUT_INT_EN);
-	usb_write(0, USB_INT_EN);
-
-	/* Disable the USB */
-	usb_write(0, USB_PM);
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* Disable USB power */
-	set_portc_dr(1, 0);
-#endif
-
-	/* if hardware supports it, disconnect from usb */
-	/* make_usb_disappear(); */
-
-	dev->ep0state = WAIT_FOR_SETUP;
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	dev->usb_address = 0;
-}
-
-/*
- * 	udc_reinit - initialize software state
- */
-static void udc_reinit(struct lh7a40x_udc *dev)
-{
-	u32 i;
-
-	DEBUG("%s, %p\n", __func__, dev);
-
-	/* device/ep0 records init */
-	INIT_LIST_HEAD(&dev->gadget.ep_list);
-	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-	dev->ep0state = WAIT_FOR_SETUP;
-
-	/* basic endpoint records init */
-	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-		struct lh7a40x_ep *ep = &dev->ep[i];
-
-		if (i != 0)
-			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-
-		ep->desc = 0;
-		ep->stopped = 0;
-		INIT_LIST_HEAD(&ep->queue);
-		ep->pio_irqs = 0;
-	}
-
-	/* the rest was statically initialized, and is read-only */
-}
-
-#define BYTES2MAXP(x)	(x / 8)
-#define MAXP2BYTES(x)	(x * 8)
-
-/* until it's enabled, this UDC should be completely invisible
- * to any USB host.
- */
-static void udc_enable(struct lh7a40x_udc *dev)
-{
-	int ep;
-
-	DEBUG("%s, %p\n", __func__, dev);
-
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* Set Port C bit 1 & 2 as output */
-	set_portc_ddr(1, 1);
-	set_portc_ddr(2, 1);
-
-	/* Enable USB power */
-	set_portc_dr(1, 0);
-#endif
-
-	/*
-	 * C.f Chapter 18.1.3.1 Initializing the USB
-	 */
-
-	/* Disable the USB */
-	usb_clear(PM_USB_ENABLE, USB_PM);
-
-	/* Reset APB & I/O sides of the USB */
-	usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET);
-	mdelay(5);
-	usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET);
-
-	/* Set MAXP values for each */
-	for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) {
-		struct lh7a40x_ep *ep_reg = &dev->ep[ep];
-		u32 csr;
-
-		usb_set_index(ep);
-
-		switch (ep_reg->ep_type) {
-		case ep_bulk_in:
-		case ep_interrupt:
-			usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET,
-				  ep_reg->csr2);
-			/* Fall through */
-		case ep_control:
-			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
-				  USB_IN_MAXP);
-			break;
-		case ep_bulk_out:
-			usb_clear(USB_OUT_CSR2_USB_DMA_EN |
-				  USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2);
-			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
-				  USB_OUT_MAXP);
-			break;
-		}
-
-		/* Read & Write CSR1, just in case */
-		csr = usb_read(ep_reg->csr1);
-		usb_write(csr, ep_reg->csr1);
-
-		flush(ep_reg);
-	}
-
-	/* Disable interrupts */
-	usb_write(0, USB_IN_INT_EN);
-	usb_write(0, USB_OUT_INT_EN);
-	usb_write(0, USB_INT_EN);
-
-	/* Enable interrupts */
-	usb_set(USB_IN_INT_EP0, USB_IN_INT_EN);
-	usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN);
-	/* Dont enable rest of the interrupts */
-	/* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN);
-	   usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */
-
-	/* Enable SUSPEND */
-	usb_set(PM_ENABLE_SUSPEND, USB_PM);
-
-	/* Enable the USB */
-	usb_set(PM_USB_ENABLE, USB_PM);
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* NOTE: DOES NOT WORK! */
-	/* Let host detect UDC:
-	 * Software must write a 0 to the PMR:DCP_CTRL bit to turn this
-	 * transistor on and pull the USBDP pin HIGH.
-	 */
-	/* usb_clear(PM_USB_DCP, USB_PM);
-	   usb_set(PM_USB_DCP, USB_PM); */
-#endif
-}
-
-/*
-  Register entry point for the peripheral controller driver.
-*/
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
-{
-	struct lh7a40x_udc *dev = the_controller;
-	int retval;
-
-	DEBUG("%s: %s\n", __func__, driver->driver.name);
-
-	if (!driver
-			|| driver->speed != USB_SPEED_FULL
-			|| !bind
-			|| !driver->disconnect
-			|| !driver->setup)
-		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
-
-	/* first hook up the driver ... */
-	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
-
-	device_add(&dev->gadget.dev);
-	retval = bind(&dev->gadget);
-	if (retval) {
-		printk(KERN_WARNING "%s: bind to driver %s --> error %d\n",
-		       dev->gadget.name, driver->driver.name, retval);
-		device_del(&dev->gadget.dev);
-
-		dev->driver = 0;
-		dev->gadget.dev.driver = 0;
-		return retval;
-	}
-
-	/* ... then enable host detection and ep0; and we're ready
-	 * for set_configuration as well as eventual disconnect.
-	 * NOTE:  this shouldn't power up until later.
-	 */
-	printk(KERN_WARNING "%s: registered gadget driver '%s'\n",
-	       dev->gadget.name, driver->driver.name);
-
-	udc_enable(dev);
-
-	return 0;
-}
-EXPORT_SYMBOL(usb_gadget_probe_driver);
-
-/*
-  Unregister entry point for the peripheral controller driver.
-*/
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
-	struct lh7a40x_udc *dev = the_controller;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver || !driver->unbind)
-		return -EINVAL;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->driver = 0;
-	stop_activity(dev, driver);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	driver->unbind(&dev->gadget);
-	dev->gadget.dev.driver = NULL;
-	device_del(&dev->gadget.dev);
-
-	udc_disable(dev);
-
-	DEBUG("unregistered gadget driver '%s'\n", driver->driver.name);
-	return 0;
-}
-
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
-/*-------------------------------------------------------------------------*/
-
-/** Write request to FIFO (max write == maxp size)
- *  Return:  0 = still running, 1 = completed, negative = errno
- *  NOTE: INDEX register must be set for EP
- */
-static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 max;
-	u32 csr;
-
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
-
-	csr = usb_read(ep->csr1);
-	DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY);
-
-	if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) {
-		unsigned count;
-		int is_last, is_short;
-
-		count = write_packet(ep, req, max);
-		usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1);
-
-		/* last packet is usually short (or a zlp) */
-		if (unlikely(count != max))
-			is_last = is_short = 1;
-		else {
-			if (likely(req->req.length != req->req.actual)
-			    || req->req.zero)
-				is_last = 0;
-			else
-				is_last = 1;
-			/* interrupt/iso maxpacket may not fill the fifo */
-			is_short = unlikely(max < ep_maxpacket(ep));
-		}
-
-		DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __func__,
-		      ep->ep.name, count,
-		      is_last ? "/L" : "", is_short ? "/S" : "",
-		      req->req.length - req->req.actual, req);
-
-		/* requests complete when all IN data is in the FIFO */
-		if (is_last) {
-			done(ep, req, 0);
-			if (list_empty(&ep->queue)) {
-				pio_irq_disable(ep_index(ep));
-			}
-			return 1;
-		}
-	} else {
-		DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
-	}
-
-	return 0;
-}
-
-/** Read to request from FIFO (max read == bytes in fifo)
- *  Return:  0 = still running, 1 = completed, negative = errno
- *  NOTE: INDEX register must be set for EP
- */
-static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 csr;
-	u8 *buf;
-	unsigned bufferspace, count, is_short;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	/* make sure there's a packet in the FIFO. */
-	csr = usb_read(ep->csr1);
-	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) {
-		DEBUG("%s: Packet NOT ready!\n", __func__);
-		return -EINVAL;
-	}
-
-	buf = req->req.buf + req->req.actual;
-	prefetchw(buf);
-	bufferspace = req->req.length - req->req.actual;
-
-	/* read all bytes from this packet */
-	count = usb_read(USB_OUT_FIFO_WC1);
-	req->req.actual += min(count, bufferspace);
-
-	is_short = (count < ep->ep.maxpacket);
-	DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
-	      ep->ep.name, csr, count,
-	      is_short ? "/S" : "", req, req->req.actual, req->req.length);
-
-	while (likely(count-- != 0)) {
-		u8 byte = (u8) (*fifo & 0xff);
-
-		if (unlikely(bufferspace == 0)) {
-			/* this happens when the driver's buffer
-			 * is smaller than what the host sent.
-			 * discard the extra data.
-			 */
-			if (req->req.status != -EOVERFLOW)
-				printk(KERN_WARNING "%s overflow %d\n",
-				       ep->ep.name, count);
-			req->req.status = -EOVERFLOW;
-		} else {
-			*buf++ = byte;
-			bufferspace--;
-		}
-	}
-
-	usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1);
-
-	/* completion */
-	if (is_short || req->req.actual == req->req.length) {
-		done(ep, req, 0);
-		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
-
-		if (list_empty(&ep->queue))
-			pio_irq_disable(ep_index(ep));
-		return 1;
-	}
-
-	/* finished that packet.  the next one may be waiting... */
-	return 0;
-}
-
-/*
- *	done - retire a request; caller blocked irqs
- *  INDEX register is preserved to keep same
- */
-static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status)
-{
-	unsigned int stopped = ep->stopped;
-	u32 index;
-
-	DEBUG("%s, %p\n", __func__, ep);
-	list_del_init(&req->queue);
-
-	if (likely(req->req.status == -EINPROGRESS))
-		req->req.status = status;
-	else
-		status = req->req.status;
-
-	if (status && status != -ESHUTDOWN)
-		DEBUG("complete %s req %p stat %d len %u/%u\n",
-		      ep->ep.name, &req->req, status,
-		      req->req.actual, req->req.length);
-
-	/* don't modify queue heads during completion callback */
-	ep->stopped = 1;
-	/* Read current index (completion may modify it) */
-	index = usb_read(USB_INDEX);
-
-	spin_unlock(&ep->dev->lock);
-	req->req.complete(&ep->ep, &req->req);
-	spin_lock(&ep->dev->lock);
-
-	/* Restore index */
-	usb_set_index(index);
-	ep->stopped = stopped;
-}
-
-/** Enable EP interrupt */
-static void pio_irq_enable(int ep)
-{
-	DEBUG("%s: %d\n", __func__, ep);
-
-	switch (ep) {
-	case 1:
-		usb_set(USB_IN_INT_EP1, USB_IN_INT_EN);
-		break;
-	case 2:
-		usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN);
-		break;
-	case 3:
-		usb_set(USB_IN_INT_EP3, USB_IN_INT_EN);
-		break;
-	default:
-		DEBUG("Unknown endpoint: %d\n", ep);
-		break;
-	}
-}
-
-/** Disable EP interrupt */
-static void pio_irq_disable(int ep)
-{
-	DEBUG("%s: %d\n", __func__, ep);
-
-	switch (ep) {
-	case 1:
-		usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN);
-		break;
-	case 2:
-		usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN);
-		break;
-	case 3:
-		usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN);
-		break;
-	default:
-		DEBUG("Unknown endpoint: %d\n", ep);
-		break;
-	}
-}
-
-/*
- * 	nuke - dequeue ALL requests
- */
-void nuke(struct lh7a40x_ep *ep, int status)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	/* Flush FIFO */
-	flush(ep);
-
-	/* called with irqs blocked */
-	while (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-		done(ep, req, status);
-	}
-
-	/* Disable IRQ if EP is enabled (has descriptor) */
-	if (ep->desc)
-		pio_irq_disable(ep_index(ep));
-}
-
-/*
-void nuke_all(struct lh7a40x_udc *dev)
-{
-	int n;
-	for(n=0; n<UDC_MAX_ENDPOINTS; n++) {
-		struct lh7a40x_ep *ep = &dev->ep[n];
-		usb_set_index(n);
-		nuke(ep, 0);
-	}
-}*/
-
-/*
-static void flush_all(struct lh7a40x_udc *dev)
-{
-	int n;
-    for (n = 0; n < UDC_MAX_ENDPOINTS; n++)
-    {
-		struct lh7a40x_ep *ep = &dev->ep[n];
-		flush(ep);
-    }
-}
-*/
-
-/** Flush EP
- * NOTE: INDEX register must be set before this call
- */
-static void flush(struct lh7a40x_ep *ep)
-{
-	DEBUG("%s, %p\n", __func__, ep);
-
-	switch (ep->ep_type) {
-	case ep_control:
-		/* check, by implication c.f. 15.1.2.11 */
-		break;
-
-	case ep_bulk_in:
-	case ep_interrupt:
-		/* if(csr & USB_IN_CSR1_IN_PKT_RDY) */
-		usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1);
-		break;
-
-	case ep_bulk_out:
-		/* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */
-		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
-		break;
-	}
-}
-
-/**
- * lh7a40x_in_epn - handle IN interrupt
- */
-static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
-{
-	u32 csr;
-	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
-	struct lh7a40x_request *req;
-
-	usb_set_index(ep_idx);
-
-	csr = usb_read(ep->csr1);
-	DEBUG("%s: %d, csr %x\n", __func__, ep_idx, csr);
-
-	if (csr & USB_IN_CSR1_SENT_STALL) {
-		DEBUG("USB_IN_CSR1_SENT_STALL\n");
-		usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ ,
-			ep->csr1);
-		return;
-	}
-
-	if (!ep->desc) {
-		DEBUG("%s: NO EP DESC\n", __func__);
-		return;
-	}
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	DEBUG("req: %p\n", req);
-
-	if (!req)
-		return;
-
-	write_fifo(ep, req);
-}
-
-/* ********************************************************************************************* */
-/* Bulk OUT (recv)
- */
-
-static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
-	struct lh7a40x_request *req;
-
-	DEBUG("%s: %d\n", __func__, ep_idx);
-
-	usb_set_index(ep_idx);
-
-	if (ep->desc) {
-		u32 csr;
-		csr = usb_read(ep->csr1);
-
-		while ((csr =
-			usb_read(ep->
-				 csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY |
-					   USB_OUT_CSR1_SENT_STALL)) {
-			DEBUG("%s: %x\n", __func__, csr);
-
-			if (csr & USB_OUT_CSR1_SENT_STALL) {
-				DEBUG("%s: stall sent, flush fifo\n",
-				      __func__);
-				/* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
-				flush(ep);
-			} else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) {
-				if (list_empty(&ep->queue))
-					req = 0;
-				else
-					req =
-					    list_entry(ep->queue.next,
-						       struct lh7a40x_request,
-						       queue);
-
-				if (!req) {
-					printk(KERN_WARNING
-					       "%s: NULL REQ %d\n",
-					       __func__, ep_idx);
-					flush(ep);
-					break;
-				} else {
-					read_fifo(ep, req);
-				}
-			}
-
-		}
-
-	} else {
-		/* Throw packet away.. */
-		printk(KERN_WARNING "%s: No descriptor?!?\n", __func__);
-		flush(ep);
-	}
-}
-
-static void stop_activity(struct lh7a40x_udc *dev,
-			  struct usb_gadget_driver *driver)
-{
-	int i;
-
-	/* don't disconnect drivers more than once */
-	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = 0;
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-
-	/* prevent new request submissions, kill any outstanding requests  */
-	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-		struct lh7a40x_ep *ep = &dev->ep[i];
-		ep->stopped = 1;
-
-		usb_set_index(i);
-		nuke(ep, -ESHUTDOWN);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-	}
-
-	/* re-init driver-visible data structures */
-	udc_reinit(dev);
-}
-
-/** Handle USB RESET interrupt
- */
-static void lh7a40x_reset_intr(struct lh7a40x_udc *dev)
-{
-#if 0				/* def CONFIG_ARCH_LH7A404 */
-	/* Does not work always... */
-
-	DEBUG("%s: %d\n", __func__, dev->usb_address);
-
-	if (!dev->usb_address) {
-		/*usb_set(USB_RESET_IO, USB_RESET);
-		   mdelay(5);
-		   usb_clear(USB_RESET_IO, USB_RESET); */
-		return;
-	}
-	/* Put the USB controller into reset. */
-	usb_set(USB_RESET_IO, USB_RESET);
-
-	/* Set Device ID to 0 */
-	udc_set_address(dev, 0);
-
-	/* Let PLL2 settle down */
-	mdelay(5);
-
-	/* Release the USB controller from reset */
-	usb_clear(USB_RESET_IO, USB_RESET);
-
-	/* Re-enable UDC */
-	udc_enable(dev);
-
-#endif
-	dev->gadget.speed = USB_SPEED_FULL;
-}
-
-/*
- *	lh7a40x usb client interrupt handler.
- */
-static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev)
-{
-	struct lh7a40x_udc *dev = _dev;
-
-	DEBUG("\n\n");
-
-	spin_lock(&dev->lock);
-
-	for (;;) {
-		u32 intr_in = usb_read(USB_IN_INT);
-		u32 intr_out = usb_read(USB_OUT_INT);
-		u32 intr_int = usb_read(USB_INT);
-
-		/* Test also against enable bits.. (lh7a40x errata).. Sigh.. */
-		u32 in_en = usb_read(USB_IN_INT_EN);
-		u32 out_en = usb_read(USB_OUT_INT_EN);
-
-		if (!intr_out && !intr_in && !intr_int)
-			break;
-
-		DEBUG("%s (on state %s)\n", __func__,
-		      state_names[dev->ep0state]);
-		DEBUG("intr_out = %x\n", intr_out);
-		DEBUG("intr_in  = %x\n", intr_in);
-		DEBUG("intr_int = %x\n", intr_int);
-
-		if (intr_in) {
-			usb_write(intr_in, USB_IN_INT);
-
-			if ((intr_in & USB_IN_INT_EP1)
-			    && (in_en & USB_IN_INT_EP1)) {
-				DEBUG("USB_IN_INT_EP1\n");
-				lh7a40x_in_epn(dev, 1, intr_in);
-			}
-			if ((intr_in & USB_IN_INT_EP3)
-			    && (in_en & USB_IN_INT_EP3)) {
-				DEBUG("USB_IN_INT_EP3\n");
-				lh7a40x_in_epn(dev, 3, intr_in);
-			}
-			if (intr_in & USB_IN_INT_EP0) {
-				DEBUG("USB_IN_INT_EP0 (control)\n");
-				lh7a40x_handle_ep0(dev, intr_in);
-			}
-		}
-
-		if (intr_out) {
-			usb_write(intr_out, USB_OUT_INT);
-
-			if ((intr_out & USB_OUT_INT_EP2)
-			    && (out_en & USB_OUT_INT_EP2)) {
-				DEBUG("USB_OUT_INT_EP2\n");
-				lh7a40x_out_epn(dev, 2, intr_out);
-			}
-		}
-
-		if (intr_int) {
-			usb_write(intr_int, USB_INT);
-
-			if (intr_int & USB_INT_RESET_INT) {
-				lh7a40x_reset_intr(dev);
-			}
-
-			if (intr_int & USB_INT_RESUME_INT) {
-				DEBUG("USB resume\n");
-
-				if (dev->gadget.speed != USB_SPEED_UNKNOWN
-				    && dev->driver
-				    && dev->driver->resume
-				    && is_usb_connected()) {
-					dev->driver->resume(&dev->gadget);
-				}
-			}
-
-			if (intr_int & USB_INT_SUSPEND_INT) {
-				DEBUG("USB suspend%s\n",
-				      is_usb_connected()? "" : "+disconnect");
-				if (!is_usb_connected()) {
-					stop_activity(dev, dev->driver);
-				} else if (dev->gadget.speed !=
-					   USB_SPEED_UNKNOWN && dev->driver
-					   && dev->driver->suspend) {
-					dev->driver->suspend(&dev->gadget);
-				}
-			}
-
-		}
-	}
-
-	spin_unlock(&dev->lock);
-
-	return IRQ_HANDLED;
-}
-
-static int lh7a40x_ep_enable(struct usb_ep *_ep,
-			     const struct usb_endpoint_descriptor *desc)
-{
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_udc *dev;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || !desc || ep->desc || _ep->name == ep0name
-	    || desc->bDescriptorType != USB_DT_ENDPOINT
-	    || ep->bEndpointAddress != desc->bEndpointAddress
-	    || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
-		DEBUG("%s, bad ep or descriptor\n", __func__);
-		return -EINVAL;
-	}
-
-	/* xfer types must match, except that interrupt ~= bulk */
-	if (ep->bmAttributes != desc->bmAttributes
-	    && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
-	    && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-		DEBUG("%s, %s type mismatch\n", __func__, _ep->name);
-		return -EINVAL;
-	}
-
-	/* hardware _could_ do smaller, but driver doesn't */
-	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-	     && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
-	    || !desc->wMaxPacketSize) {
-		DEBUG("%s, bad %s maxpacket\n", __func__, _ep->name);
-		return -ERANGE;
-	}
-
-	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-		DEBUG("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	ep->stopped = 0;
-	ep->desc = desc;
-	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	/* Reset halt state (does flush) */
-	lh7a40x_set_halt(_ep, 0);
-
-	DEBUG("%s: enabled %s\n", __func__, _ep->name);
-	return 0;
-}
-
-/** Disable EP
- *  NOTE: Sets INDEX register
- */
-static int lh7a40x_ep_disable(struct usb_ep *_ep)
-{
-	struct lh7a40x_ep *ep;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || !ep->desc) {
-		DEBUG("%s, %s not enabled\n", __func__,
-		      _ep ? ep->ep.name : NULL);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	usb_set_index(ep_index(ep));
-
-	/* Nuke all pending requests (does flush) */
-	nuke(ep, -ESHUTDOWN);
-
-	/* Disable ep IRQ */
-	pio_irq_disable(ep_index(ep));
-
-	ep->desc = 0;
-	ep->stopped = 1;
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	DEBUG("%s: disabled %s\n", __func__, _ep->name);
-	return 0;
-}
-
-static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
-						 gfp_t gfp_flags)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	req = kzalloc(sizeof(*req), gfp_flags);
-	if (!req)
-		return 0;
-
-	INIT_LIST_HEAD(&req->queue);
-
-	return &req->req;
-}
-
-static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	req = container_of(_req, struct lh7a40x_request, req);
-	WARN_ON(!list_empty(&req->queue));
-	kfree(req);
-}
-
-/** Queue one request
- *  Kickstart transfer if needed
- *  NOTE: Sets INDEX register
- */
-static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
-			 gfp_t gfp_flags)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_udc *dev;
-	unsigned long flags;
-
-	DEBUG("\n\n\n%s, %p\n", __func__, _ep);
-
-	req = container_of(_req, struct lh7a40x_request, req);
-	if (unlikely
-	    (!_req || !_req->complete || !_req->buf
-	     || !list_empty(&req->queue))) {
-		DEBUG("%s, bad params\n", __func__);
-		return -EINVAL;
-	}
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	dev = ep->dev;
-	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-		DEBUG("%s, bogus device state %p\n", __func__, dev->driver);
-		return -ESHUTDOWN;
-	}
-
-	DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
-	      _req->buf);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	_req->status = -EINPROGRESS;
-	_req->actual = 0;
-
-	/* kickstart this i/o queue? */
-	DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
-	      ep->stopped);
-	if (list_empty(&ep->queue) && likely(!ep->stopped)) {
-		u32 csr;
-
-		if (unlikely(ep_index(ep) == 0)) {
-			/* EP0 */
-			list_add_tail(&req->queue, &ep->queue);
-			lh7a40x_ep0_kick(dev, ep);
-			req = 0;
-		} else if (ep_is_in(ep)) {
-			/* EP1 & EP3 */
-			usb_set_index(ep_index(ep));
-			csr = usb_read(ep->csr1);
-			pio_irq_enable(ep_index(ep));
-			if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) {
-				if (write_fifo(ep, req) == 1)
-					req = 0;
-			}
-		} else {
-			/* EP2 */
-			usb_set_index(ep_index(ep));
-			csr = usb_read(ep->csr1);
-			pio_irq_enable(ep_index(ep));
-			if (!(csr & USB_OUT_CSR1_FIFO_FULL)) {
-				if (read_fifo(ep, req) == 1)
-					req = 0;
-			}
-		}
-	}
-
-	/* pio or dma irq handler advances the queue. */
-	if (likely(req != 0))
-		list_add_tail(&req->queue, &ep->queue);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return 0;
-}
-
-/* dequeue JUST ONE request */
-static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_request *req;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || ep->ep.name == ep0name)
-		return -EINVAL;
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry(req, &ep->queue, queue) {
-		if (&req->req == _req)
-			break;
-	}
-	if (&req->req != _req) {
-		spin_unlock_irqrestore(&ep->dev->lock, flags);
-		return -EINVAL;
-	}
-
-	done(ep, req, -ECONNRESET);
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-	return 0;
-}
-
-/** Halt specific EP
- *  Return 0 if success
- *  NOTE: Sets INDEX register to EP !
- */
-static int lh7a40x_set_halt(struct usb_ep *_ep, int value)
-{
-	struct lh7a40x_ep *ep;
-	unsigned long flags;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	usb_set_index(ep_index(ep));
-
-	DEBUG("%s, ep %d, val %d\n", __func__, ep_index(ep), value);
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	if (ep_index(ep) == 0) {
-		/* EP0 */
-		usb_set(EP0_SEND_STALL, ep->csr1);
-	} else if (ep_is_in(ep)) {
-		u32 csr = usb_read(ep->csr1);
-		if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY)
-			      || !list_empty(&ep->queue))) {
-			/*
-			 * Attempts to halt IN endpoints will fail (returning -EAGAIN)
-			 * if any transfer requests are still queued, or if the controller
-			 * FIFO still holds bytes that the host hasn't collected.
-			 */
-			spin_unlock_irqrestore(&ep->dev->lock, flags);
-			DEBUG
-			    ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
-			     (csr & USB_IN_CSR1_FIFO_NOT_EMPTY),
-			     !list_empty(&ep->queue));
-			return -EAGAIN;
-		}
-		flush(ep);
-		if (value)
-			usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1);
-		else {
-			usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1);
-			usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1);
-		}
-
-	} else {
-
-		flush(ep);
-		if (value)
-			usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1);
-		else {
-			usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1);
-			usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1);
-		}
-	}
-
-	if (value) {
-		ep->stopped = 1;
-	} else {
-		ep->stopped = 0;
-	}
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
-
-	return 0;
-}
-
-/** Return bytes in EP FIFO
- *  NOTE: Sets INDEX register to EP
- */
-static int lh7a40x_fifo_status(struct usb_ep *_ep)
-{
-	u32 csr;
-	int count = 0;
-	struct lh7a40x_ep *ep;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -ENODEV;
-	}
-
-	DEBUG("%s, %d\n", __func__, ep_index(ep));
-
-	/* LPD can't report unclaimed bytes from IN fifos */
-	if (ep_is_in(ep))
-		return -EOPNOTSUPP;
-
-	usb_set_index(ep_index(ep));
-
-	csr = usb_read(ep->csr1);
-	if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
-	    csr & USB_OUT_CSR1_OUT_PKT_RDY) {
-		count = usb_read(USB_OUT_FIFO_WC1);
-	}
-
-	return count;
-}
-
-/** Flush EP FIFO
- *  NOTE: Sets INDEX register to EP
- */
-static void lh7a40x_fifo_flush(struct usb_ep *_ep)
-{
-	struct lh7a40x_ep *ep;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return;
-	}
-
-	usb_set_index(ep_index(ep));
-	flush(ep);
-}
-
-/****************************************************************/
-/* End Point 0 related functions                                */
-/****************************************************************/
-
-/* return:  0 = still running, 1 = completed, negative = errno */
-static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 max;
-	unsigned count;
-	int is_last;
-
-	max = ep_maxpacket(ep);
-
-	DEBUG_EP0("%s\n", __func__);
-
-	count = write_packet(ep, req, max);
-
-	/* last packet is usually short (or a zlp) */
-	if (unlikely(count != max))
-		is_last = 1;
-	else {
-		if (likely(req->req.length != req->req.actual) || req->req.zero)
-			is_last = 0;
-		else
-			is_last = 1;
-	}
-
-	DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
-		  ep->ep.name, count,
-		  is_last ? "/L" : "", req->req.length - req->req.actual, req);
-
-	/* requests complete when all IN data is in the FIFO */
-	if (is_last) {
-		done(ep, req, 0);
-		return 1;
-	}
-
-	return 0;
-}
-
-static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep,
-					unsigned char *cp, int max)
-{
-	int bytes;
-	int count = usb_read(USB_OUT_FIFO_WC1);
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	if (count > max)
-		count = max;
-	bytes = count;
-	while (count--)
-		*cp++ = *fifo & 0xFF;
-	return bytes;
-}
-
-static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep,
-					  unsigned char *cp, int count)
-{
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-	DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count);
-	while (count--)
-		*fifo = *cp++;
-}
-
-static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 csr;
-	u8 *buf;
-	unsigned bufferspace, count, is_short;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	DEBUG_EP0("%s\n", __func__);
-
-	csr = usb_read(USB_EP0_CSR);
-	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY))
-		return 0;
-
-	buf = req->req.buf + req->req.actual;
-	prefetchw(buf);
-	bufferspace = req->req.length - req->req.actual;
-
-	/* read all bytes from this packet */
-	if (likely(csr & EP0_OUT_PKT_RDY)) {
-		count = usb_read(USB_OUT_FIFO_WC1);
-		req->req.actual += min(count, bufferspace);
-	} else			/* zlp */
-		count = 0;
-
-	is_short = (count < ep->ep.maxpacket);
-	DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
-		  ep->ep.name, csr, count,
-		  is_short ? "/S" : "", req, req->req.actual, req->req.length);
-
-	while (likely(count-- != 0)) {
-		u8 byte = (u8) (*fifo & 0xff);
-
-		if (unlikely(bufferspace == 0)) {
-			/* this happens when the driver's buffer
-			 * is smaller than what the host sent.
-			 * discard the extra data.
-			 */
-			if (req->req.status != -EOVERFLOW)
-				DEBUG_EP0("%s overflow %d\n", ep->ep.name,
-					  count);
-			req->req.status = -EOVERFLOW;
-		} else {
-			*buf++ = byte;
-			bufferspace--;
-		}
-	}
-
-	/* completion */
-	if (is_short || req->req.actual == req->req.length) {
-		done(ep, req, 0);
-		return 1;
-	}
-
-	/* finished that packet.  the next one may be waiting... */
-	return 0;
-}
-
-/**
- * udc_set_address - set the USB address for this device
- * @address:
- *
- * Called from control endpoint function after it decodes a set address setup packet.
- */
-static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address)
-{
-	DEBUG_EP0("%s: %d\n", __func__, address);
-	/* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */
-	dev->usb_address = address;
-	usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA);
-	usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA);
-	/* usb_read(USB_FA); */
-}
-
-/*
- * DATA_STATE_RECV (OUT_PKT_RDY)
- *      - if error
- *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
- *      - else
- *              set EP0_CLR_OUT bit
- 				if last set EP0_DATA_END bit
- */
-static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	int ret;
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	if (req) {
-
-		if (req->req.length == 0) {
-			DEBUG_EP0("ZERO LENGTH OUT!\n");
-			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-			dev->ep0state = WAIT_FOR_SETUP;
-			return;
-		}
-		ret = read_fifo_ep0(ep, req);
-		if (ret) {
-			/* Done! */
-			DEBUG_EP0("%s: finished, waiting for status\n",
-				  __func__);
-
-			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-			dev->ep0state = WAIT_FOR_SETUP;
-		} else {
-			/* Not done yet.. */
-			DEBUG_EP0("%s: not finished\n", __func__);
-			usb_set(EP0_CLR_OUT, USB_EP0_CSR);
-		}
-	} else {
-		DEBUG_EP0("NO REQ??!\n");
-	}
-}
-
-/*
- * DATA_STATE_XMIT
- */
-static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	int ret, need_zlp = 0;
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	if (!req) {
-		DEBUG_EP0("%s: NULL REQ\n", __func__);
-		return 0;
-	}
-
-	if (req->req.length == 0) {
-
-		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-		dev->ep0state = WAIT_FOR_SETUP;
-		return 1;
-	}
-
-	if (req->req.length - req->req.actual == EP0_PACKETSIZE) {
-		/* Next write will end with the packet size, */
-		/* so we need Zero-length-packet */
-		need_zlp = 1;
-	}
-
-	ret = write_fifo_ep0(ep, req);
-
-	if (ret == 1 && !need_zlp) {
-		/* Last packet */
-		DEBUG_EP0("%s: finished, waiting for status\n", __func__);
-
-		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-		dev->ep0state = WAIT_FOR_SETUP;
-	} else {
-		DEBUG_EP0("%s: not finished\n", __func__);
-		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
-	}
-
-	if (need_zlp) {
-		DEBUG_EP0("%s: Need ZLP!\n", __func__);
-		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
-		dev->ep0state = DATA_STATE_NEED_ZLP;
-	}
-
-	return 1;
-}
-
-static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev,
-				     struct usb_ctrlrequest *ctrl)
-{
-	struct lh7a40x_ep *ep0 = &dev->ep[0];
-	struct lh7a40x_ep *qep;
-	int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
-	u16 val = 0;
-
-	if (reqtype == USB_RECIP_INTERFACE) {
-		/* This is not supported.
-		 * And according to the USB spec, this one does nothing..
-		 * Just return 0
-		 */
-		DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
-	} else if (reqtype == USB_RECIP_DEVICE) {
-		DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
-		val |= (1 << 0);	/* Self powered */
-		/*val |= (1<<1); *//* Remote wakeup */
-	} else if (reqtype == USB_RECIP_ENDPOINT) {
-		int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
-
-		DEBUG_SETUP
-		    ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
-		     ep_num, ctrl->wLength);
-
-		if (ctrl->wLength > 2 || ep_num > 3)
-			return -EOPNOTSUPP;
-
-		qep = &dev->ep[ep_num];
-		if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
-		    && ep_index(qep) != 0) {
-			return -EOPNOTSUPP;
-		}
-
-		usb_set_index(ep_index(qep));
-
-		/* Return status on next IN token */
-		switch (qep->ep_type) {
-		case ep_control:
-			val =
-			    (usb_read(qep->csr1) & EP0_SEND_STALL) ==
-			    EP0_SEND_STALL;
-			break;
-		case ep_bulk_in:
-		case ep_interrupt:
-			val =
-			    (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) ==
-			    USB_IN_CSR1_SEND_STALL;
-			break;
-		case ep_bulk_out:
-			val =
-			    (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) ==
-			    USB_OUT_CSR1_SEND_STALL;
-			break;
-		}
-
-		/* Back to EP0 index */
-		usb_set_index(0);
-
-		DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
-			    ctrl->wIndex, val);
-	} else {
-		DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
-		return -EOPNOTSUPP;
-	}
-
-	/* Clear "out packet ready" */
-	usb_set((EP0_CLR_OUT), USB_EP0_CSR);
-	/* Put status to FIFO */
-	lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val));
-	/* Issue "In packet ready" */
-	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-
-	return 0;
-}
-
-/*
- * WAIT_FOR_SETUP (OUT_PKT_RDY)
- *      - read data packet from EP0 FIFO
- *      - decode command
- *      - if error
- *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
- *      - else
- *              set EP0_CLR_OUT | EP0_DATA_END bits
- */
-static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	struct usb_ctrlrequest ctrl;
-	int i, bytes, is_in;
-
-	DEBUG_SETUP("%s: %x\n", __func__, csr);
-
-	/* Nuke all previous transfers */
-	nuke(ep, -EPROTO);
-
-	/* read control req from fifo (8 bytes) */
-	bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8);
-
-	DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes);
-	DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType,
-		    ctrl.bRequestType == USB_DIR_IN);
-	DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest);
-	DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength);
-	DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8);
-	DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex);
-
-	/* Set direction of EP0 */
-	if (likely(ctrl.bRequestType & USB_DIR_IN)) {
-		ep->bEndpointAddress |= USB_DIR_IN;
-		is_in = 1;
-	} else {
-		ep->bEndpointAddress &= ~USB_DIR_IN;
-		is_in = 0;
-	}
-
-	dev->req_pending = 1;
-
-	/* Handle some SETUP packets ourselves */
-	switch (ctrl.bRequest) {
-	case USB_REQ_SET_ADDRESS:
-		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-			break;
-
-		DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
-		udc_set_address(dev, ctrl.wValue);
-		usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-		return;
-
-	case USB_REQ_GET_STATUS:{
-			if (lh7a40x_handle_get_status(dev, &ctrl) == 0)
-				return;
-
-	case USB_REQ_CLEAR_FEATURE:
-	case USB_REQ_SET_FEATURE:
-			if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
-				struct lh7a40x_ep *qep;
-				int ep_num = (ctrl.wIndex & 0x0f);
-
-				/* Support only HALT feature */
-				if (ctrl.wValue != 0 || ctrl.wLength != 0
-				    || ep_num > 3 || ep_num < 1)
-					break;
-
-				qep = &dev->ep[ep_num];
-				spin_unlock(&dev->lock);
-				if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
-					DEBUG_SETUP("SET_FEATURE (%d)\n",
-						    ep_num);
-					lh7a40x_set_halt(&qep->ep, 1);
-				} else {
-					DEBUG_SETUP("CLR_FEATURE (%d)\n",
-						    ep_num);
-					lh7a40x_set_halt(&qep->ep, 0);
-				}
-				spin_lock(&dev->lock);
-				usb_set_index(0);
-
-				/* Reply with a ZLP on next IN token */
-				usb_set((EP0_CLR_OUT | EP0_DATA_END),
-					USB_EP0_CSR);
-				return;
-			}
-			break;
-		}
-
-	default:
-		break;
-	}
-
-	if (likely(dev->driver)) {
-		/* device-2-host (IN) or no data setup command, process immediately */
-		spin_unlock(&dev->lock);
-		i = dev->driver->setup(&dev->gadget, &ctrl);
-		spin_lock(&dev->lock);
-
-		if (i < 0) {
-			/* setup processing failed, force stall */
-			DEBUG_SETUP
-			    ("  --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
-			     i);
-			usb_set_index(0);
-			usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL),
-				USB_EP0_CSR);
-
-			/* ep->stopped = 1; */
-			dev->ep0state = WAIT_FOR_SETUP;
-		}
-	}
-}
-
-/*
- * DATA_STATE_NEED_ZLP
- */
-static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr)
-{
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	/* c.f. Table 15-14 */
-	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-	dev->ep0state = WAIT_FOR_SETUP;
-}
-
-/*
- * handle ep0 interrupt
- */
-static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	u32 csr;
-
-	/* Set index 0 */
-	usb_set_index(0);
- 	csr = usb_read(USB_EP0_CSR);
-
-	DEBUG_EP0("%s: csr = %x\n", __func__, csr);
-
-	/*
-	 * For overview of what we should be doing see c.f. Chapter 18.1.2.4
-	 * We will follow that outline here modified by our own global state
-	 * indication which provides hints as to what we think should be
-	 * happening..
-	 */
-
-	/*
-	 * if SENT_STALL is set
-	 *      - clear the SENT_STALL bit
-	 */
-	if (csr & EP0_SENT_STALL) {
-		DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __func__, csr);
-		usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR);
-		nuke(ep, -ECONNABORTED);
-		dev->ep0state = WAIT_FOR_SETUP;
-		return;
-	}
-
-	/*
-	 * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear
-	 *      - fill EP0 FIFO
-	 *      - if last packet
-	 *      -       set IN_PKT_RDY | DATA_END
-	 *      - else
-	 *              set IN_PKT_RDY
-	 */
-	if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) {
-		DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n",
-			  __func__);
-
-		switch (dev->ep0state) {
-		case DATA_STATE_XMIT:
-			DEBUG_EP0("continue with DATA_STATE_XMIT\n");
-			lh7a40x_ep0_in(dev, csr);
-			return;
-		case DATA_STATE_NEED_ZLP:
-			DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
-			lh7a40x_ep0_in_zlp(dev, csr);
-			return;
-		default:
-			/* Stall? */
-			DEBUG_EP0("Odd state!! state = %s\n",
-				  state_names[dev->ep0state]);
-			dev->ep0state = WAIT_FOR_SETUP;
-			/* nuke(ep, 0); */
-			/* usb_set(EP0_SEND_STALL, ep->csr1); */
-			break;
-		}
-	}
-
-	/*
-	 * if SETUP_END is set
-	 *      - abort the last transfer
-	 *      - set SERVICED_SETUP_END_BIT
-	 */
-	if (csr & EP0_SETUP_END) {
-		DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __func__, csr);
-
-		usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR);
-
-		nuke(ep, 0);
-		dev->ep0state = WAIT_FOR_SETUP;
-	}
-
-	/*
-	 * if EP0_OUT_PKT_RDY is set
-	 *      - read data packet from EP0 FIFO
-	 *      - decode command
-	 *      - if error
-	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL
-	 *      - else
-	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits
-	 */
-	if (csr & EP0_OUT_PKT_RDY) {
-
-		DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __func__,
-			  csr);
-
-		switch (dev->ep0state) {
-		case WAIT_FOR_SETUP:
-			DEBUG_EP0("WAIT_FOR_SETUP\n");
-			lh7a40x_ep0_setup(dev, csr);
-			break;
-
-		case DATA_STATE_RECV:
-			DEBUG_EP0("DATA_STATE_RECV\n");
-			lh7a40x_ep0_out(dev, csr);
-			break;
-
-		default:
-			/* send stall? */
-			DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
-				  dev->ep0state);
-			break;
-		}
-	}
-}
-
-static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep)
-{
-	u32 csr;
-
-	usb_set_index(0);
-	csr = usb_read(USB_EP0_CSR);
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	/* Clear "out packet ready" */
-	usb_set(EP0_CLR_OUT, USB_EP0_CSR);
-
-	if (ep_is_in(ep)) {
-		dev->ep0state = DATA_STATE_XMIT;
-		lh7a40x_ep0_in(dev, csr);
-	} else {
-		dev->ep0state = DATA_STATE_RECV;
-		lh7a40x_ep0_out(dev, csr);
-	}
-}
-
-/* ---------------------------------------------------------------------------
- * 	device-scoped parts of the api to the usb controller hardware
- * ---------------------------------------------------------------------------
- */
-
-static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget)
-{
-	u32 frame1 = usb_read(USB_FRM_NUM1);	/* Least significant 8 bits */
-	u32 frame2 = usb_read(USB_FRM_NUM2);	/* Most significant 3 bits */
-	DEBUG("%s, %p\n", __func__, _gadget);
-	return ((frame2 & 0x07) << 8) | (frame1 & 0xff);
-}
-
-static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget)
-{
-	/* host may not have enabled remote wakeup */
-	/*if ((UDCCS0 & UDCCS0_DRWF) == 0)
-	   return -EHOSTUNREACH;
-	   udc_set_mask_UDCCR(UDCCR_RSM); */
-	return -ENOTSUPP;
-}
-
-static const struct usb_gadget_ops lh7a40x_udc_ops = {
-	.get_frame = lh7a40x_udc_get_frame,
-	.wakeup = lh7a40x_udc_wakeup,
-	/* current versions must always be self-powered */
-};
-
-static void nop_release(struct device *dev)
-{
-	DEBUG("%s %s\n", __func__, dev_name(dev));
-}
-
-static struct lh7a40x_udc memory = {
-	.usb_address = 0,
-
-	.gadget = {
-		   .ops = &lh7a40x_udc_ops,
-		   .ep0 = &memory.ep[0].ep,
-		   .name = driver_name,
-		   .dev = {
-			   .init_name = "gadget",
-			   .release = nop_release,
-			   },
-		   },
-
-	/* control endpoint */
-	.ep[0] = {
-		  .ep = {
-			 .name = ep0name,
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = EP0_PACKETSIZE,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = 0,
-		  .bmAttributes = 0,
-
-		  .ep_type = ep_control,
-		  .fifo = io_p2v(USB_EP0_FIFO),
-		  .csr1 = USB_EP0_CSR,
-		  .csr2 = USB_EP0_CSR,
-		  },
-
-	/* first group of endpoints */
-	.ep[1] = {
-		  .ep = {
-			 .name = "ep1in-bulk",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = USB_DIR_IN | 1,
-		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
-
-		  .ep_type = ep_bulk_in,
-		  .fifo = io_p2v(USB_EP1_FIFO),
-		  .csr1 = USB_IN_CSR1,
-		  .csr2 = USB_IN_CSR2,
-		  },
-
-	.ep[2] = {
-		  .ep = {
-			 .name = "ep2out-bulk",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = 2,
-		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
-
-		  .ep_type = ep_bulk_out,
-		  .fifo = io_p2v(USB_EP2_FIFO),
-		  .csr1 = USB_OUT_CSR1,
-		  .csr2 = USB_OUT_CSR2,
-		  },
-
-	.ep[3] = {
-		  .ep = {
-			 .name = "ep3in-int",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = USB_DIR_IN | 3,
-		  .bmAttributes = USB_ENDPOINT_XFER_INT,
-
-		  .ep_type = ep_interrupt,
-		  .fifo = io_p2v(USB_EP3_FIFO),
-		  .csr1 = USB_IN_CSR1,
-		  .csr2 = USB_IN_CSR2,
-		  },
-};
-
-/*
- * 	probe - binds to the platform device
- */
-static int lh7a40x_udc_probe(struct platform_device *pdev)
-{
-	struct lh7a40x_udc *dev = &memory;
-	int retval;
-
-	DEBUG("%s: %p\n", __func__, pdev);
-
-	spin_lock_init(&dev->lock);
-	dev->dev = &pdev->dev;
-
-	device_initialize(&dev->gadget.dev);
-	dev->gadget.dev.parent = &pdev->dev;
-
-	the_controller = dev;
-	platform_set_drvdata(pdev, dev);
-
-	udc_disable(dev);
-	udc_reinit(dev);
-
-	/* irq setup after old hardware state is cleaned up */
-	retval =
-	    request_irq(IRQ_USBINTR, lh7a40x_udc_irq, IRQF_DISABLED, driver_name,
-			dev);
-	if (retval != 0) {
-		DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
-		      IRQ_USBINTR, retval);
-		return -EBUSY;
-	}
-
-	create_proc_files();
-
-	return retval;
-}
-
-static int lh7a40x_udc_remove(struct platform_device *pdev)
-{
-	struct lh7a40x_udc *dev = platform_get_drvdata(pdev);
-
-	DEBUG("%s: %p\n", __func__, pdev);
-
-	if (dev->driver)
-		return -EBUSY;
-
-	udc_disable(dev);
-	remove_proc_files();
-
-	free_irq(IRQ_USBINTR, dev);
-
-	platform_set_drvdata(pdev, 0);
-
-	the_controller = 0;
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct platform_driver udc_driver = {
-	.probe = lh7a40x_udc_probe,
-	.remove = lh7a40x_udc_remove,
-	    /* FIXME power management support */
-	    /* .suspend = ... disable UDC */
-	    /* .resume = ... re-enable UDC */
-	.driver	= {
-		.name = (char *)driver_name,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init udc_init(void)
-{
-	DEBUG("%s: %s version %s\n", __func__, driver_name, DRIVER_VERSION);
-	return platform_driver_register(&udc_driver);
-}
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-
-module_init(udc_init);
-module_exit(udc_exit);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:lh7a40x_udc");
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
deleted file mode 100644
index ca86120..0000000
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * linux/drivers/usb/gadget/lh7a40x_udc.h
- * Sharp LH7A40x on-chip full speed USB device controllers
- *
- * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
- * Copyright (C) 2004 Bo Henriksen, Nordic ID
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __LH7A40X_H_
-#define __LH7A40X_H_
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/byteorder.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <mach/hardware.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-/*
- * Memory map
- */
-
-#define USB_FA					0x80000200	// function address register
-#define USB_PM					0x80000204	// power management register
-
-#define USB_IN_INT				0x80000208	// IN interrupt register bank (EP0-EP3)
-#define USB_OUT_INT				0x80000210	// OUT interrupt register bank (EP2)
-#define USB_INT					0x80000218	// interrupt register bank
-
-#define USB_IN_INT_EN			0x8000021C	// IN interrupt enable register bank
-#define USB_OUT_INT_EN			0x80000224	// OUT interrupt enable register bank
-#define USB_INT_EN				0x8000022C	// USB interrupt enable register bank
-
-#define USB_FRM_NUM1			0x80000230	// Frame number1 register
-#define USB_FRM_NUM2			0x80000234	// Frame number2 register
-#define USB_INDEX				0x80000238	// index register
-
-#define USB_IN_MAXP				0x80000240	// IN MAXP register
-#define USB_IN_CSR1				0x80000244	// IN CSR1 register/EP0 CSR register
-#define USB_EP0_CSR				0x80000244	// IN CSR1 register/EP0 CSR register
-#define USB_IN_CSR2				0x80000248	// IN CSR2 register
-#define USB_OUT_MAXP			0x8000024C	// OUT MAXP register
-
-#define USB_OUT_CSR1			0x80000250	// OUT CSR1 register
-#define USB_OUT_CSR2			0x80000254	// OUT CSR2 register
-#define USB_OUT_FIFO_WC1		0x80000258	// OUT FIFO write count1 register
-#define USB_OUT_FIFO_WC2		0x8000025C	// OUT FIFO write count2 register
-
-#define USB_RESET				0x8000044C	// USB reset register
-
-#define	USB_EP0_FIFO			0x80000280
-#define	USB_EP1_FIFO			0x80000284
-#define	USB_EP2_FIFO			0x80000288
-#define	USB_EP3_FIFO			0x8000028c
-
-/*
- * USB reset register
- */
-#define USB_RESET_APB			(1<<1)	//resets USB APB control side WRITE
-#define USB_RESET_IO			(1<<0)	//resets USB IO side WRITE
-
-/*
- * USB function address register
- */
-#define USB_FA_ADDR_UPDATE		(1<<7)
-#define USB_FA_FUNCTION_ADDR	(0x7F)
-
-/*
- * Power Management register
- */
-#define PM_USB_DCP				(1<<5)
-#define PM_USB_ENABLE			(1<<4)
-#define PM_USB_RESET			(1<<3)
-#define PM_UC_RESUME			(1<<2)
-#define PM_SUSPEND_MODE			(1<<1)
-#define PM_ENABLE_SUSPEND		(1<<0)
-
-/*
- * IN interrupt register
- */
-#define USB_IN_INT_EP3				(1<<3)
-#define USB_IN_INT_EP1				(1<<1)
-#define USB_IN_INT_EP0				(1<<0)
-
-/*
- * OUT interrupt register
- */
-#define USB_OUT_INT_EP2				(1<<2)
-
-/*
- * USB interrupt register
- */
-#define USB_INT_RESET_INT			(1<<2)
-#define USB_INT_RESUME_INT			(1<<1)
-#define USB_INT_SUSPEND_INT			(1<<0)
-
-/*
- * USB interrupt enable register
- */
-#define USB_INT_EN_USB_RESET_INTER		(1<<2)
-#define USB_INT_EN_RESUME_INTER			(1<<1)
-#define USB_INT_EN_SUSPEND_INTER		(1<<0)
-
-/*
- * INCSR1 register
- */
-#define USB_IN_CSR1_CLR_DATA_TOGGLE		(1<<6)
-#define USB_IN_CSR1_SENT_STALL			(1<<5)
-#define USB_IN_CSR1_SEND_STALL			(1<<4)
-#define USB_IN_CSR1_FIFO_FLUSH			(1<<3)
-#define USB_IN_CSR1_FIFO_NOT_EMPTY		(1<<1)
-#define USB_IN_CSR1_IN_PKT_RDY			(1<<0)
-
-/*
- * INCSR2 register
- */
-#define USB_IN_CSR2_AUTO_SET			(1<<7)
-#define USB_IN_CSR2_USB_DMA_EN			(1<<4)
-
-/*
- * OUT CSR1 register
- */
-#define USB_OUT_CSR1_CLR_DATA_REG		(1<<7)
-#define USB_OUT_CSR1_SENT_STALL			(1<<6)
-#define USB_OUT_CSR1_SEND_STALL			(1<<5)
-#define USB_OUT_CSR1_FIFO_FLUSH			(1<<4)
-#define USB_OUT_CSR1_FIFO_FULL			(1<<1)
-#define USB_OUT_CSR1_OUT_PKT_RDY		(1<<0)
-
-/*
- * OUT CSR2 register
- */
-#define USB_OUT_CSR2_AUTO_CLR			(1<<7)
-#define USB_OUT_CSR2_USB_DMA_EN			(1<<4)
-
-/*
- * EP0 CSR
- */
-#define EP0_CLR_SETUP_END		(1<<7)	/* Clear "Setup Ends" Bit (w) */
-#define EP0_CLR_OUT				(1<<6)	/* Clear "Out packet ready" Bit (w) */
-#define EP0_SEND_STALL			(1<<5)	/* Send STALL Handshake (rw) */
-#define EP0_SETUP_END			(1<<4)	/* Setup Ends (r) */
-
-#define EP0_DATA_END			(1<<3)	/* Data end (rw) */
-#define EP0_SENT_STALL			(1<<2)	/* Sent Stall Handshake (r) */
-#define EP0_IN_PKT_RDY			(1<<1)	/* In packet ready (rw) */
-#define EP0_OUT_PKT_RDY			(1<<0)	/* Out packet ready (r) */
-
-/* general CSR */
-#define OUT_PKT_RDY		(1<<0)
-#define IN_PKT_RDY		(1<<0)
-
-/*
- * IN/OUT MAXP register
- */
-#define USB_OUT_MAXP_MAXP			(0xF)
-#define USB_IN_MAXP_MAXP			(0xF)
-
-// Max packet size
-//#define EP0_PACKETSIZE        0x10
-#define EP0_PACKETSIZE  	0x8
-#define EP0_MAXPACKETSIZE  	0x10
-
-#define UDC_MAX_ENDPOINTS       4
-
-#define WAIT_FOR_SETUP          0
-#define DATA_STATE_XMIT         1
-#define DATA_STATE_NEED_ZLP     2
-#define WAIT_FOR_OUT_STATUS     3
-#define DATA_STATE_RECV         4
-
-/* ********************************************************************************************* */
-/* IO
- */
-
-typedef enum ep_type {
-	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-} ep_type_t;
-
-struct lh7a40x_ep {
-	struct usb_ep ep;
-	struct lh7a40x_udc *dev;
-
-	const struct usb_endpoint_descriptor *desc;
-	struct list_head queue;
-	unsigned long pio_irqs;
-
-	u8 stopped;
-	u8 bEndpointAddress;
-	u8 bmAttributes;
-
-	ep_type_t ep_type;
-	u32 fifo;
-	u32 csr1;
-	u32 csr2;
-};
-
-struct lh7a40x_request {
-	struct usb_request req;
-	struct list_head queue;
-};
-
-struct lh7a40x_udc {
-	struct usb_gadget gadget;
-	struct usb_gadget_driver *driver;
-	struct device *dev;
-	spinlock_t lock;
-
-	int ep0state;
-	struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS];
-
-	unsigned char usb_address;
-
-	unsigned req_pending:1, req_std:1, req_config:1;
-};
-
-extern struct lh7a40x_udc *the_controller;
-
-#define ep_is_in(EP) 		(((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN)
-#define ep_index(EP) 		((EP)->bEndpointAddress&0xF)
-#define ep_maxpacket(EP) 	((EP)->ep.maxpacket)
-
-#endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f4062bb..e728863 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1014,11 +1014,6 @@ MODULE_LICENSE ("GPL");
 #define OMAP3_PLATFORM_DRIVER	ohci_hcd_omap3_driver
 #endif
 
-#ifdef CONFIG_ARCH_LH7A404
-#include "ohci-lh7a404.c"
-#define PLATFORM_DRIVER		ohci_hcd_lh7a404_driver
-#endif
-
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #include "ohci-pxa27x.c"
 #define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
deleted file mode 100644
index 18d39f0..0000000
--- a/drivers/usb/host/ohci-lh7a404.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for Sharp LH7A404
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <mach/hardware.h>
-
-
-extern int usb_disabled(void);
-
-/*-------------------------------------------------------------------------*/
-
-static void lh7a404_start_hc(struct platform_device *dev)
-{
-	printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n",
-	       __FILE__);
-
-	/*
-	 * Now, carefully enable the USB clock, and take
-	 * the USB host controller out of reset.
-	 */
-	CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
-	udelay(1000);
-	USBH_CMDSTATUS = OHCI_HCR;
-
-	printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__);
-}
-
-static void lh7a404_stop_hc(struct platform_device *dev)
-{
-	printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n",
-	       __FILE__);
-
-	CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
-/**
- * usb_hcd_lh7a404_probe - initialize LH7A404-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_hcd_lh7a404_probe (const struct hc_driver *driver,
-			  struct platform_device *dev)
-{
-	int retval;
-	struct usb_hcd *hcd;
-
-	if (dev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
-	}
-
-	hcd = usb_create_hcd(driver, &dev->dev, "lh7a404");
-	if (!hcd)
-		return -ENOMEM;
-	hcd->rsrc_start = dev->resource[0].start;
-	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		pr_debug("request_mem_region failed");
-		retval = -EBUSY;
-		goto err1;
-	}
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		pr_debug("ioremap failed");
-		retval = -ENOMEM;
-		goto err2;
-	}
-
-	lh7a404_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
-	if (retval == 0)
-		return retval;
-
-	lh7a404_stop_hc(dev);
-	iounmap(hcd->regs);
- err2:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
-	usb_put_hcd(hcd);
-	return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_lh7a404_remove - shutdown processing for LH7A404-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_lh7a404_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_hcd_lh7a404_remove (struct usb_hcd *hcd, struct platform_device *dev)
-{
-	usb_remove_hcd(hcd);
-	lh7a404_stop_hc(dev);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-ohci_lh7a404_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	ohci_dbg (ohci, "ohci_lh7a404_start, ohci:%p", ohci);
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_lh7a404_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"LH7A404 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_lh7a404_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	pr_debug ("In ohci_hcd_lh7a404_drv_probe");
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_lh7a404_probe(&ohci_lh7a404_hc_driver, pdev);
-	return ret;
-}
-
-static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_hcd_lh7a404_remove(hcd, pdev);
-	return 0;
-}
-	/*TBD*/
-/*static int ohci_hcd_lh7a404_drv_suspend(struct platform_device *dev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-	return 0;
-}
-static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-
-	return 0;
-}
-*/
-
-static struct platform_driver ohci_hcd_lh7a404_driver = {
-	.probe		= ohci_hcd_lh7a404_drv_probe,
-	.remove		= ohci_hcd_lh7a404_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	/*.suspend	= ohci_hcd_lh7a404_drv_suspend, */
-	/*.resume	= ohci_hcd_lh7a404_drv_resume, */
-	.driver		= {
-		.name	= "lh7a404-ohci",
-		.owner	= THIS_MODULE,
-	},
-};
-
-MODULE_ALIAS("platform:lh7a404-ohci");
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index bad11a7..35e5fd6 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -575,18 +575,8 @@ static inline void _ohci_writel (const struct ohci_hcd *ohci,
 #endif
 }
 
-#ifdef CONFIG_ARCH_LH7A404
-/* Marc Singer: at the time this code was written, the LH7A404
- * had a problem reading the USB host registers.  This
- * implementation of the ohci_readl function performs the read
- * twice as a work-around.
- */
-#define ohci_readl(o,r)		(_ohci_readl(o,r),_ohci_readl(o,r))
-#define ohci_writel(o,v,r)	_ohci_writel(o,v,r)
-#else
 #define ohci_readl(o,r)		_ohci_readl(o,r)
 #define ohci_writel(o,v,r)	_ohci_writel(o,v,r)
-#endif
 
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6bafb51b..b57bc27 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -322,69 +322,6 @@ config FB_ARMCLCD
 	  here and read <file:Documentation/kbuild/modules.txt>.  The module
 	  will be called amba-clcd.
 
-choice
-
-	depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
-	prompt "LCD Panel"
-	default FB_ARMCLCD_SHARP_LQ035Q7DB02
-
-config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
-	bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
-	help
-	  This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
-	  color QVGA, HRTFT panel.  The LogicPD device includes
-	  an integrated HRTFT controller IC.
-	  The native resolution is 240x320.
-
-config FB_ARMCLCD_SHARP_LQ057Q3DC02
-	bool "LogicPD LCD 5.7\" QVGA"
-	help
-	  This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
-	  color QVGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 320x240.
-
-config FB_ARMCLCD_SHARP_LQ64D343
-	bool "LogicPD LCD 6.4\" VGA"
-	help
-	  This is an implementation of the Sharp LQ64D343, a 6.4"
-	  color VGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 640x480.
-
-config FB_ARMCLCD_SHARP_LQ10D368
-	bool "LogicPD LCD 10.4\" VGA"
-	help
-	  This is an implementation of the Sharp LQ10D368, a 10.4"
-	  color VGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 640x480.
-
-
-config FB_ARMCLCD_SHARP_LQ121S1DG41
-	bool "LogicPD LCD 12.1\" SVGA"
-	help
-	  This is an implementation of the Sharp LQ121S1DG41, a 12.1"
-	  color SVGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 800x600.
-
-	  This panel requires a clock rate may be an integer fraction
-	  of the base LCDCLK frequency.  The driver will select the
-	  highest frequency available that is lower than the maximum
-	  allowed.  The panel may flicker if the clock rate is
-	  slower than the recommended minimum.
-
-config FB_ARMCLCD_AUO_A070VW01_WIDE
-	bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
-	help
-	  This is an implementation of the AU Optronics, a 7.0"
-	  WIDE Color.  The native resolution is 234x480.
-
-config FB_ARMCLCD_HITACHI
-	bool "Hitachi Wide Screen 800x480"
-	help
-	  This is an implementation of the Hitachi 800x480.
-
-endchoice
-
-
 config FB_ACORN
 	bool "Acorn VIDC support"
 	depends on (FB = y) && ARM && ARCH_ACORN