summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-01-07 14:39:20 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-07 14:39:20 -0800
commit56b85f32d530d09d6805488ad00775d4e0e3baab (patch)
treee7fbe69e338ef775d3b2dd822aa915d259b4bc94
parent3e5b08cbbf78bedd316904ab0cf3b27119433ee5 (diff)
parent568389c257fa7d74ce36c2f78bad31965fded4cf (diff)
downloadop-kernel-dev-56b85f32d530d09d6805488ad00775d4e0e3baab.zip
op-kernel-dev-56b85f32d530d09d6805488ad00775d4e0e3baab.tar.gz
Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits) serial: apbuart: Fixup apbuart_console_init() TTY: Add tty ioctl to figure device node of the system console. tty: add 'active' sysfs attribute to tty0 and console device drivers: serial: apbuart: Handle OF failures gracefully Serial: Avoid unbalanced IRQ wake disable during resume tty: fix typos/errors in tty_driver.h comments pch_uart : fix warnings for 64bit compile 8250: fix uninitialized FIFOs ip2: fix compiler warning on ip2main_pci_tbl specialix: fix compiler warning on specialix_pci_tbl rocket: fix compiler warning on rocket_pci_ids 8250: add a UPIO_DWAPB32 for 32 bit accesses 8250: use container_of() instead of casting serial: omap-serial: Add support for kernel debugger serial: fix pch_uart kconfig & build drivers: char: hvc: add arm JTAG DCC console support RS485 documentation: add 16C950 UART description serial: ifx6x60: fix memory leak serial: ifx6x60: free IRQ on error Serial: EG20T: add PCH_UART driver ... Fixed up conflicts in drivers/serial/apbuart.c with evil merge that makes the code look fairly sane (unlike either side).
-rw-r--r--Documentation/ABI/testing/sysfs-tty19
-rw-r--r--Documentation/filesystems/proc.txt24
-rw-r--r--Documentation/serial/00-INDEX2
-rw-r--r--Documentation/serial/serial-rs485.txt120
-rw-r--r--arch/alpha/include/asm/ioctls.h1
-rw-r--r--arch/mips/include/asm/ioctls.h1
-rw-r--r--arch/parisc/include/asm/ioctls.h1
-rw-r--r--arch/parisc/kernel/pdc_cons.c8
-rw-r--r--arch/powerpc/include/asm/ioctls.h1
-rw-r--r--arch/sh/include/asm/ioctls.h1
-rw-r--r--arch/sparc/include/asm/ioctls.h1
-rw-r--r--arch/xtensa/include/asm/ioctls.h1
-rw-r--r--drivers/char/Kconfig9
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/hvc_dcc.c133
-rw-r--r--drivers/char/ip2/ip2main.c2
-rw-r--r--drivers/char/rocket.c2
-rw-r--r--drivers/char/specialix.c2
-rw-r--r--drivers/serial/8250.c109
-rw-r--r--drivers/serial/8250_pci.c36
-rw-r--r--drivers/serial/Kconfig25
-rw-r--r--drivers/serial/Makefile5
-rw-r--r--drivers/serial/apbuart.c57
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h6
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c19
-rw-r--r--drivers/serial/ifx6x60.c1406
-rw-r--r--drivers/serial/ifx6x60.h129
-rw-r--r--drivers/serial/mpc52xx_uart.c6
-rw-r--r--drivers/serial/omap-serial.c38
-rw-r--r--drivers/serial/pch_uart.c1451
-rw-r--r--drivers/serial/serial_core.c10
-rw-r--r--drivers/serial/vt8500_serial.c648
-rw-r--r--drivers/tty/n_gsm.c213
-rw-r--r--drivers/tty/tty_io.c52
-rw-r--r--drivers/tty/vt/vt.c23
-rw-r--r--drivers/video/xen-fbfront.c2
-rw-r--r--fs/compat_ioctl.c1
-rw-r--r--fs/proc/Makefile1
-rw-r--r--fs/proc/proc_console.c114
-rw-r--r--include/asm-generic/ioctls.h1
-rw-r--r--include/linux/console.h8
-rw-r--r--include/linux/serial_core.h7
-rw-r--r--include/linux/spi/ifx_modem.h14
-rw-r--r--include/linux/tty_driver.h9
-rw-r--r--kernel/printk.c8
45 files changed, 4538 insertions, 189 deletions
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
new file mode 100644
index 0000000..b138b66
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -0,0 +1,19 @@
+What: /sys/class/tty/console/active
+Date: Nov 2010
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description:
+ Shows the list of currently configured
+ console devices, like 'tty1 ttyS0'.
+ The last entry in the file is the active
+ device connected to /dev/console.
+ The file supports poll() to detect virtual
+ console switches.
+
+What: /sys/class/tty/tty0/active
+Date: Nov 2010
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description:
+ Shows the currently active virtual console
+ device, like 'tty1'.
+ The file supports poll() to detect virtual
+ console switches.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index e73df27..9471225 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1181,6 +1181,30 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
mb_groups details of multiblock allocator buddy cache of free blocks
..............................................................................
+2.0 /proc/consoles
+------------------
+Shows registered system console lines.
+
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/consoles:
+
+ > cat /proc/consoles
+ tty0 -WU (ECp) 4:7
+ ttyS0 -W- (Ep) 4:64
+
+The columns are:
+
+ device name of the device
+ operations R = can do read operations
+ W = can do write operations
+ U = can do unblank
+ flags E = it is enabled
+ C = it is prefered console
+ B = it is primary boot console
+ p = it is used for printk buffer
+ b = it is not a TTY but a Braille device
+ a = it is safe to use when cpu is offline
+ major:minor major and minor number of the device separated by a colon
------------------------------------------------------------------------------
Summary
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index 07dcdb0..e09468a 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -14,6 +14,8 @@ riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
- info on the Comtrol RocketPort multiport serial driver.
+serial-rs485.txt
+ - info about RS485 structures and support in the kernel.
specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
stallion.txt
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
new file mode 100644
index 0000000..a493238
--- /dev/null
+++ b/Documentation/serial/serial-rs485.txt
@@ -0,0 +1,120 @@
+ RS485 SERIAL COMMUNICATIONS
+
+1. INTRODUCTION
+
+ EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
+ electrical characteristics of drivers and receivers for use in balanced
+ digital multipoint systems.
+ This standard is widely used for communications in industrial automation
+ because it can be used effectively over long distances and in electrically
+ noisy environments.
+
+2. HARDWARE-RELATED CONSIDERATIONS
+
+ Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in
+ half-duplex mode capable of automatically controlling line direction by
+ toggling RTS or DTR signals. That can be used to control external
+ half-duplex hardware like an RS485 transceiver or any RS232-connected
+ half-duplex devices like some modems.
+
+ For these microcontrollers, the Linux driver should be made capable of
+ working in both modes, and proper ioctls (see later) should be made
+ available at user-level to allow switching from one mode to the other, and
+ vice versa.
+
+3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+
+ The Linux kernel provides the serial_rs485 structure (see [1]) to handle
+ RS485 communications. This data structure is used to set and configure RS485
+ parameters in the platform data and in ioctls.
+
+ Any driver for devices capable of working both as RS232 and RS485 should
+ provide at least the following ioctls:
+
+ - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used
+ to enable/disable RS485 mode from user-space
+
+ - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used
+ to get RS485 mode from kernel-space (i.e., driver) to user-space.
+
+ In other words, the serial driver should contain a code similar to the next
+ one:
+
+ static struct uart_ops atmel_pops = {
+ /* ... */
+ .ioctl = handle_ioctl,
+ };
+
+ static int handle_ioctl(struct uart_port *port,
+ unsigned int cmd,
+ unsigned long arg)
+ {
+ struct serial_rs485 rs485conf;
+
+ switch (cmd) {
+ case TIOCSRS485:
+ if (copy_from_user(&rs485conf,
+ (struct serial_rs485 *) arg,
+ sizeof(rs485conf)))
+ return -EFAULT;
+
+ /* ... */
+ break;
+
+ case TIOCGRS485:
+ if (copy_to_user((struct serial_rs485 *) arg,
+ ...,
+ sizeof(rs485conf)))
+ return -EFAULT;
+ /* ... */
+ break;
+
+ /* ... */
+ }
+ }
+
+
+4. USAGE FROM USER-LEVEL
+
+ From user-level, RS485 configuration can be get/set using the previous
+ ioctls. For instance, to set RS485 you can use the following code:
+
+ #include <linux/serial.h>
+
+ /* Driver-specific ioctls: */
+ #define TIOCGRS485 0x542E
+ #define TIOCSRS485 0x542F
+
+ /* Open your specific device (e.g., /dev/mydevice): */
+ int fd = open ("/dev/mydevice", O_RDWR);
+ if (fd < 0) {
+ /* Error handling. See errno. */
+ }
+
+ struct serial_rs485 rs485conf;
+
+ /* Set RS485 mode: */
+ rs485conf.flags |= SER_RS485_ENABLED;
+
+ /* Set rts delay before send, if needed: */
+ rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
+ rs485conf.delay_rts_before_send = ...;
+
+ /* Set rts delay after send, if needed: */
+ rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+ rs485conf.delay_rts_after_send = ...;
+
+ if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
+ /* Error handling. See errno. */
+ }
+
+ /* Use read() and write() syscalls here... */
+
+ /* Close the device when finished: */
+ if (close (fd) < 0) {
+ /* Error handling. See errno. */
+ }
+
+5. REFERENCES
+
+ [1] include/linux/serial.h
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 59617c3..034b6cf 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -92,6 +92,7 @@
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
index d87cb04..d967b89 100644
--- a/arch/mips/include/asm/ioctls.h
+++ b/arch/mips/include/asm/ioctls.h
@@ -83,6 +83,7 @@
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
/* I hope the range from 0x5480 on is free ... */
diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h
index 4e06144..6ba80d0 100644
--- a/arch/parisc/include/asm/ioctls.h
+++ b/arch/parisc/include/asm/ioctls.h
@@ -52,6 +52,7 @@
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 66d1f17..11bdd68 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -92,8 +92,6 @@ static int pdc_console_setup(struct console *co, char *options)
static struct timer_list pdc_console_timer;
-extern struct console * console_drivers;
-
static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
{
@@ -169,11 +167,13 @@ static int __init pdc_console_tty_driver_init(void)
* It is unregistered if the pdc console was not selected as the
* primary console. */
- struct console *tmp = console_drivers;
+ struct console *tmp;
- for (tmp = console_drivers; tmp; tmp = tmp->next)
+ acquire_console_sem();
+ for_each_console(tmp)
if (tmp == &pdc_cons)
break;
+ release_console_sem();
if (!tmp) {
printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name);
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
index 8519200..c7dc17c 100644
--- a/arch/powerpc/include/asm/ioctls.h
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -94,6 +94,7 @@
#define TIOCSRS485 0x542f
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG 0x5453
diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h
index eb6c4c6..84e85a7 100644
--- a/arch/sh/include/asm/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
@@ -85,6 +85,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
index 53f4ee0..ed3807b 100644
--- a/arch/sparc/include/asm/ioctls.h
+++ b/arch/sparc/include/asm/ioctls.h
@@ -19,6 +19,7 @@
#define TCSETS2 _IOW('T', 13, struct termios2)
#define TCSETSW2 _IOW('T', 14, struct termios2)
#define TCSETSF2 _IOW('T', 15, struct termios2)
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
/* Note that all the ioctls that are not available in Linux have a
* double underscore on the front to: a) avoid some programs to
diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h
index ab18000..ccf1800 100644
--- a/arch/xtensa/include/asm/ioctls.h
+++ b/arch/xtensa/include/asm/ioctls.h
@@ -98,6 +98,7 @@
#define TCSETSF2 _IOW('T', 45, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCSERCONFIG _IO('T', 83)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43d3395..d4a7776 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -682,6 +682,15 @@ config HVC_UDBG
select HVC_DRIVER
default n
+config HVC_DCC
+ bool "ARM JTAG DCC console"
+ depends on ARM
+ select HVC_DRIVER
+ help
+ This console uses the JTAG DCC on ARM to create a console under the HVC
+ driver. This console is used through a JTAG only on ARM. If you don't have
+ a JTAG then you probably don't want this option.
+
config VIRTIO_CONSOLE
tristate "Virtio console"
depends on VIRTIO
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index ba53ec9..fa0b824 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o
obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o
obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o
obj-$(CONFIG_HVC_TILE) += hvc_tile.o
+obj-$(CONFIG_HVC_DCC) += hvc_dcc.o
obj-$(CONFIG_HVC_BEAT) += hvc_beat.o
obj-$(CONFIG_HVC_DRIVER) += hvc_console.o
obj-$(CONFIG_HVC_IRQ) += hvc_irq.o
diff --git a/drivers/char/hvc_dcc.c b/drivers/char/hvc_dcc.c
new file mode 100644
index 0000000..6470f63
--- /dev/null
+++ b/drivers/char/hvc_dcc.c
@@ -0,0 +1,133 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+
+#include "hvc_console.h"
+
+/* DCC Status Bits */
+#define DCC_STATUS_RX (1 << 30)
+#define DCC_STATUS_TX (1 << 29)
+
+static inline u32 __dcc_getstatus(void)
+{
+ u32 __ret;
+
+ asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
+ : "=r" (__ret) : : "cc");
+
+ return __ret;
+}
+
+
+#if defined(CONFIG_CPU_V7)
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bne get_wait \n\
+ mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c) : : "cc");
+
+ return __c;
+}
+#else
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c));
+
+ return __c;
+}
+#endif
+
+#if defined(CONFIG_CPU_V7)
+static inline void __dcc_putchar(char c)
+{
+ asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bcs put_wait \n\
+ mcr p14, 0, %0, c0, c5, 0 "
+ : : "r" (c) : "cc");
+}
+#else
+static inline void __dcc_putchar(char c)
+{
+ asm("mcr p14, 0, %0, c0, c5, 0 @ write a char"
+ : /* no output register */
+ : "r" (c));
+}
+#endif
+
+static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ while (__dcc_getstatus() & DCC_STATUS_TX)
+ cpu_relax();
+
+ __dcc_putchar((char)(buf[i] & 0xFF));
+ }
+
+ return count;
+}
+
+static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; ++i) {
+ int c = -1;
+
+ if (__dcc_getstatus() & DCC_STATUS_RX)
+ c = __dcc_getchar();
+ if (c < 0)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_dcc_get_put_ops = {
+ .get_chars = hvc_dcc_get_chars,
+ .put_chars = hvc_dcc_put_chars,
+};
+
+static int __init hvc_dcc_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
+ return 0;
+}
+console_initcall(hvc_dcc_console_init);
+
+static int __init hvc_dcc_init(void)
+{
+ hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
+ return 0;
+}
+device_initcall(hvc_dcc_init);
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index fcd02ba..c3a0253 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -3224,7 +3224,7 @@ ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned lo
MODULE_LICENSE("GPL");
-static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
{ }
};
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 86308830..3e4e73a 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -1764,7 +1764,7 @@ static void rp_flush_buffer(struct tty_struct *tty)
#ifdef CONFIG_PCI
-static struct pci_device_id __devinitdata rocket_pci_ids[] = {
+static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
{ }
};
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index a7616d2..c2bca3f 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -2355,7 +2355,7 @@ static void __exit specialix_exit_module(void)
func_exit();
}
-static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
{ }
};
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ee74c93..b25e6e4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -454,21 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
writeb(value, p->membase + offset);
}
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+ int value)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+
+ if (offset == UART_LCR)
+ up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+ if (offset == UART_TX || offset == UART_IER)
+ p->serial_in(p, UART_IER);
+}
+
static void dwapb_serial_out(struct uart_port *p, int offset, int value)
{
int save_offset = offset;
offset = map_8250_out_reg(p, offset) << p->regshift;
- /* Save the LCR value so it can be re-written when a
- * Busy Detect interrupt occurs. */
- if (save_offset == UART_LCR) {
- struct uart_8250_port *up = (struct uart_8250_port *)p;
- up->lcr = value;
- }
+ dwapb_save_out_value(p, save_offset, value);
writeb(value, p->membase + offset);
- /* Read the IER to ensure any interrupt is cleared before
- * returning from ISR. */
- if (save_offset == UART_TX || save_offset == UART_IER)
- value = p->serial_in(p, UART_IER);
+ dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+ int save_offset = offset;
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ dwapb_save_out_value(p, save_offset, value);
+ writel(value, p->membase + offset);
+ dwapb_check_clear_ier(p, save_offset);
}
static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -485,7 +504,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
static void set_io_from_upio(struct uart_port *p)
{
- struct uart_8250_port *up = (struct uart_8250_port *)p;
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -518,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = dwapb_serial_out;
break;
+ case UPIO_DWAPB32:
+ p->serial_in = mem32_serial_in;
+ p->serial_out = dwapb32_serial_out;
+ break;
+
default:
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
@@ -536,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
case UPIO_MEM32:
case UPIO_AU:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
break;
@@ -1319,7 +1345,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
static void serial8250_stop_tx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
__stop_tx(up);
@@ -1336,7 +1363,8 @@ static void transmit_chars(struct uart_8250_port *up);
static void serial8250_start_tx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
@@ -1364,7 +1392,8 @@ static void serial8250_start_tx(struct uart_port *port)
static void serial8250_stop_rx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
@@ -1373,7 +1402,8 @@ static void serial8250_stop_rx(struct uart_port *port)
static void serial8250_enable_ms(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
/* no MSR capabilities */
if (up->bugs & UART_BUG_NOMSR)
@@ -1581,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
handled = 1;
end = NULL;
- } else if (up->port.iotype == UPIO_DWAPB &&
+ } else if ((up->port.iotype == UPIO_DWAPB ||
+ up->port.iotype == UPIO_DWAPB32) &&
(iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* The DesignWare APB UART has an Busy Detect (0x07)
* interrupt meaning an LCR write attempt occured while the
@@ -1781,7 +1812,8 @@ static void serial8250_backup_timeout(unsigned long data)
static unsigned int serial8250_tx_empty(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
unsigned int lsr;
@@ -1795,7 +1827,8 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
static unsigned int serial8250_get_mctrl(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned int status;
unsigned int ret;
@@ -1815,7 +1848,8 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char mcr = 0;
if (mctrl & TIOCM_RTS)
@@ -1836,7 +1870,8 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void serial8250_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
@@ -1890,7 +1925,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
static int serial8250_get_poll_char(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char lsr = serial_inp(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
@@ -1904,7 +1940,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
unsigned char c)
{
unsigned int ier;
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
/*
* First save the IER then disable the interrupts
@@ -1938,11 +1975,14 @@ static void serial8250_put_poll_char(struct uart_port *port,
static int serial8250_startup(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
unsigned char lsr, iir;
int retval;
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
@@ -2166,7 +2206,8 @@ dont_test_tx_en:
static void serial8250_shutdown(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
/*
@@ -2235,7 +2276,8 @@ void
serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
@@ -2435,7 +2477,8 @@ serial8250_set_ldisc(struct uart_port *port, int new)
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_8250_port *p = (struct uart_8250_port *)port;
+ struct uart_8250_port *p =
+ container_of(port, struct uart_8250_port, port);
serial8250_set_sleep(p, state != 0);
}
@@ -2476,6 +2519,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_MEM32:
case UPIO_MEM:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
@@ -2513,6 +2557,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
case UPIO_MEM32:
case UPIO_MEM:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
@@ -2566,7 +2611,8 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
static void serial8250_release_port(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
serial8250_release_std_resource(up);
if (up->port.type == PORT_RSA)
@@ -2575,7 +2621,8 @@ static void serial8250_release_port(struct uart_port *port)
static int serial8250_request_port(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
int ret = 0;
ret = serial8250_request_std_resource(up);
@@ -2590,7 +2637,8 @@ static int serial8250_request_port(struct uart_port *port)
static void serial8250_config_port(struct uart_port *port, int flags)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
int probeflags = PROBE_ANY;
int ret;
@@ -2771,7 +2819,8 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
static void serial8250_console_putchar(struct uart_port *port, int ch)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
wait_for_xmitr(up, UART_LSR_THRE);
serial_out(up, UART_TX, ch);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 842e3b2..8b8930f 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -957,6 +957,22 @@ pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int
+ce4100_serial_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ int ret;
+
+ ret = setup_port(priv, port, 0, 0, board->reg_shift);
+ port->iotype = UPIO_MEM32;
+ port->type = PORT_XSCALE;
+ port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->regshift = 2;
+
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
@@ -981,6 +997,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
+#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
#define PCI_DEVICE_ID_TITAN_200I 0x8028
#define PCI_DEVICE_ID_TITAN_400I 0x8048
@@ -1072,6 +1089,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = skip_tx_en_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_CE4100_UART,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = ce4100_serial_setup,
+ },
/*
* ITE
*/
@@ -1592,6 +1616,7 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
pbn_ADDIDATA_PCIe_8_3906250,
+ pbn_ce4100_1_115200,
};
/*
@@ -2281,6 +2306,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.uart_offset = 0x200,
.first_offset = 0x1000,
},
+ [pbn_ce4100_1_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .reg_shift = 2,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -3765,6 +3796,11 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3004,
0, 0, pbn_b0_bt_4_115200 },
+ /* Intel CE4100 */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_ce4100_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index aff9dcd..ec3c214 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1381,6 +1381,16 @@ config SERIAL_MSM_CONSOLE
depends on SERIAL_MSM=y
select SERIAL_CORE_CONSOLE
+config SERIAL_VT8500
+ bool "VIA VT8500 on-chip serial port support"
+ depends on ARM && ARCH_VT8500
+ select SERIAL_CORE
+
+config SERIAL_VT8500_CONSOLE
+ bool "VIA VT8500 serial console support"
+ depends on SERIAL_VT8500=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_NETX
tristate "NetX serial port support"
depends on ARM && ARCH_NETX
@@ -1632,4 +1642,19 @@ config SERIAL_ALTERA_UART_CONSOLE
help
Enable a Altera UART port to be the system console.
+config SERIAL_IFX6X60
+ tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
+ depends on GPIOLIB && SPI && EXPERIMENTAL
+ help
+ Support for the IFX6x60 modem devices on Intel MID platforms.
+
+config SERIAL_PCH_UART
+ tristate "Intel EG20T PCH UART"
+ depends on PCI && DMADEVICES
+ select SERIAL_CORE
+ select PCH_DMA
+ help
+ This driver is for PCH(Platform controller Hub) UART of Intel EG20T
+ which is an IOH(Input/Output Hub) for x86 embedded processor.
+ Enabling PCH_DMA, this PCH UART works as DMA mode.
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c570576..8ea92e9 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -80,12 +80,15 @@ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
-obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
+obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
+obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index 767ce9e..095a5d5 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -521,11 +521,12 @@ static struct console grlib_apbuart_console = {
};
-static void grlib_apbuart_configure(void);
+static int grlib_apbuart_configure(void);
static int __init apbuart_console_init(void)
{
- grlib_apbuart_configure();
+ if (grlib_apbuart_configure())
+ return -ENODEV;
register_console(&grlib_apbuart_console);
return 0;
}
@@ -596,57 +597,49 @@ static struct of_platform_driver grlib_apbuart_of_driver = {
};
-static void grlib_apbuart_configure(void)
+static int grlib_apbuart_configure(void)
{
- static int enum_done;
struct device_node *np, *rp;
- struct uart_port *port = NULL;
const u32 *prop;
- int freq_khz;
- int v = 0, d = 0;
- unsigned int addr;
- int irq, line;
- struct amba_prom_registers *regs;
-
- if (enum_done)
- return;
+ int freq_khz, line = 0;
/* Get bus frequency */
rp = of_find_node_by_path("/");
+ if (!rp)
+ return -ENODEV;
rp = of_get_next_child(rp, NULL);
+ if (!rp)
+ return -ENODEV;
prop = of_get_property(rp, "clock-frequency", NULL);
+ if (!prop)
+ return -ENODEV;
freq_khz = *prop;
- line = 0;
for_each_matching_node(np, apbuart_match) {
+ const int *irqs, *ampopts;
+ const struct amba_prom_registers *regs;
+ struct uart_port *port;
+ unsigned long addr;
- int *vendor = (int *) of_get_property(np, "vendor", NULL);
- int *device = (int *) of_get_property(np, "device", NULL);
- int *irqs = (int *) of_get_property(np, "interrupts", NULL);
- int *ampopts = (int *) of_get_property(np, "ampopts", NULL);
- regs = (struct amba_prom_registers *)
- of_get_property(np, "reg", NULL);
-
+ ampopts = of_get_property(np, "ampopts", NULL);
if (ampopts && (*ampopts == 0))
continue; /* Ignore if used by another OS instance */
- if (vendor)
- v = *vendor;
- if (device)
- d = *device;
+
+ irqs = of_get_property(np, "interrupts", NULL);
+ regs = of_get_property(np, "reg", NULL);
if (!irqs || !regs)
- return;
+ continue;
grlib_apbuart_nodes[line] = np;
addr = regs->phys_addr;
- irq = *irqs;
port = &grlib_apbuart_ports[line];
port->mapbase = addr;
port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
- port->irq = irq;
+ port->irq = *irqs;
port->iotype = UPIO_MEM;
port->ops = &grlib_apbuart_ops;
port->flags = UPF_BOOT_AUTOCONF;
@@ -658,12 +651,10 @@ static void grlib_apbuart_configure(void)
/* We support maximum UART_NR uarts ... */
if (line == UART_NR)
break;
-
}
- enum_done = 1;
-
grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+ return line ? 0 : -ENODEV;
}
static int __init grlib_apbuart_init(void)
@@ -671,7 +662,9 @@ static int __init grlib_apbuart_init(void)
int ret;
/* Find all APBUARTS in device the tree and initialize their ports */
- grlib_apbuart_configure();
+ ret = grlib_apbuart_configure();
+ if (ret)
+ return ret;
printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 7274b52..b754dcf 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -76,18 +76,12 @@ struct uart_cpm_port {
unsigned char *tx_buf;
unsigned char *rx_buf;
u32 flags;
- void (*set_lineif)(struct uart_cpm_port *);
struct clk *clk;
u8 brg;
uint dp_addr;
void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
- /* helpers */
- int baud;
- int bits;
- /* Keep track of 'odd' SMC2 wirings */
- int is_portb;
/* wait on close if needed */
int wait_closing;
/* value to combine with opcode to form cpm command */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f2b8adc..8692ff9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -72,6 +72,8 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
/**************************************************************/
+#define HW_BUF_SPD_THRESHOLD 9600
+
/*
* Check, if transmit buffers are processed
*/
@@ -503,6 +505,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
pr_debug("CPM uart[%d]:set_termios\n", port->line);
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ if (baud <= HW_BUF_SPD_THRESHOLD ||
+ (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
+ pinfo->rx_fifosize = 1;
+ else
+ pinfo->rx_fifosize = RX_BUF_SIZE;
/* Character length programmed into the mode register is the
* sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
@@ -594,6 +601,17 @@ static void cpm_uart_set_termios(struct uart_port *port,
*/
bits++;
if (IS_SMC(pinfo)) {
+ /*
+ * MRBLR can be changed while an SMC/SCC is operating only
+ * if it is done in a single bus cycle with one 16-bit move
+ * (not two 8-bit bus cycles back-to-back). This occurs when
+ * the cp shifts control to the next RxBD, so the change does
+ * not take effect immediately. To guarantee the exact RxBD
+ * on which the change occurs, change MRBLR only while the
+ * SMC/SCC receiver is disabled.
+ */
+ out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize);
+
/* Set the mode register. We want to keep a copy of the
* enables, because we want to put them back if they were
* present.
@@ -604,6 +622,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
SMCMR_SM_UART | prev_mode);
} else {
+ out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
diff --git a/drivers/serial/ifx6x60.c b/drivers/serial/ifx6x60.c
new file mode 100644
index 0000000..ab93763
--- /dev/null
+++ b/drivers/serial/ifx6x60.c
@@ -0,0 +1,1406 @@
+/****************************************************************************
+ *
+ * Driver for the IFX 6x60 spi modem.
+ *
+ * Copyright (C) 2008 Option International
+ * Copyright (C) 2008 Filip Aben <f.aben@option.com>
+ * Denis Joseph Barrow <d.barow@option.com>
+ * Jan Dumon <j.dumon@option.com>
+ *
+ * Copyright (C) 2009, 2010 Intel Corp
+ * Russ Gorby <richardx.r.gorby@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA
+ *
+ * Driver modified by Intel from Option gtm501l_spi.c
+ *
+ * Notes
+ * o The driver currently assumes a single device only. If you need to
+ * change this then look for saved_ifx_dev and add a device lookup
+ * o The driver is intended to be big-endian safe but has never been
+ * tested that way (no suitable hardware). There are a couple of FIXME
+ * notes by areas that may need addressing
+ * o Some of the GPIO naming/setup assumptions may need revisiting if
+ * you need to use this driver for another platform.
+ *
+ *****************************************************************************/
+#include <linux/module.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/tty.h>
+#include <linux/kfifo.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/serial.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/rfkill.h>
+#include <linux/fs.h>
+#include <linux/ip.h>
+#include <linux/dmapool.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/ifx_modem.h>
+#include <linux/delay.h>
+
+#include "ifx6x60.h"
+
+#define IFX_SPI_MORE_MASK 0x10
+#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */
+#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */
+#define IFX_SPI_TTY_ID 0
+#define IFX_SPI_TIMEOUT_SEC 2
+#define IFX_SPI_HEADER_0 (-1)
+#define IFX_SPI_HEADER_F (-2)
+
+/* forward reference */
+static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
+
+/* local variables */
+static int spi_b16 = 1; /* 8 or 16 bit word length */
+static struct tty_driver *tty_drv;
+static struct ifx_spi_device *saved_ifx_dev;
+static struct lock_class_key ifx_spi_key;
+
+/* GPIO/GPE settings */
+
+/**
+ * mrdy_set_high - set MRDY GPIO
+ * @ifx: device we are controlling
+ *
+ */
+static inline void mrdy_set_high(struct ifx_spi_device *ifx)
+{
+ gpio_set_value(ifx->gpio.mrdy, 1);
+}
+
+/**
+ * mrdy_set_low - clear MRDY GPIO
+ * @ifx: device we are controlling
+ *
+ */
+static inline void mrdy_set_low(struct ifx_spi_device *ifx)
+{
+ gpio_set_value(ifx->gpio.mrdy, 0);
+}
+
+/**
+ * ifx_spi_power_state_set
+ * @ifx_dev: our SPI device
+ * @val: bits to set
+ *
+ * Set bit in power status and signal power system if status becomes non-0
+ */
+static void
+ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ifx_dev->power_lock, flags);
+
+ /*
+ * if power status is already non-0, just update, else
+ * tell power system
+ */
+ if (!ifx_dev->power_status)
+ pm_runtime_get(&ifx_dev->spi_dev->dev);
+ ifx_dev->power_status |= val;
+
+ spin_unlock_irqrestore(&ifx_dev->power_lock, flags);
+}
+
+/**
+ * ifx_spi_power_state_clear - clear power bit
+ * @ifx_dev: our SPI device
+ * @val: bits to clear
+ *
+ * clear bit in power status and signal power system if status becomes 0
+ */
+static void
+ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ifx_dev->power_lock, flags);
+
+ if (ifx_dev->power_status) {
+ ifx_dev->power_status &= ~val;
+ if (!ifx_dev->power_status)
+ pm_runtime_put(&ifx_dev->spi_dev->dev);
+ }
+
+ spin_unlock_irqrestore(&ifx_dev->power_lock, flags);
+}
+
+/**
+ * swap_buf
+ * @buf: our buffer
+ * @len : number of bytes (not words) in the buffer
+ * @end: end of buffer
+ *
+ * Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf(u16 *buf, int len, void *end)
+{
+ int n;
+
+ len = ((len + 1) >> 1);
+ if ((void *)&buf[len] > end) {
+ pr_err("swap_buf: swap exceeds boundary (%p > %p)!",
+ &buf[len], end);
+ return;
+ }
+ for (n = 0; n < len; n++) {
+ *buf = cpu_to_be16(*buf);
+ buf++;
+ }
+}
+
+/**
+ * mrdy_assert - assert MRDY line
+ * @ifx_dev: our SPI device
+ *
+ * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low
+ * now.
+ *
+ * FIXME: Can SRDY even go high as we are running this code ?
+ */
+static void mrdy_assert(struct ifx_spi_device *ifx_dev)
+{
+ int val = gpio_get_value(ifx_dev->gpio.srdy);
+ if (!val) {
+ if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING,
+ &ifx_dev->flags)) {
+ ifx_dev->spi_timer.expires =
+ jiffies + IFX_SPI_TIMEOUT_SEC*HZ;
+ add_timer(&ifx_dev->spi_timer);
+
+ }
+ }
+ ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING);
+ mrdy_set_high(ifx_dev);
+}
+
+/**
+ * ifx_spi_hangup - hang up an IFX device
+ * @ifx_dev: our SPI device
+ *
+ * Hang up the tty attached to the IFX device if one is currently
+ * open. If not take no action
+ */
+static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev)
+{
+ struct tty_port *pport = &ifx_dev->tty_port;
+ struct tty_struct *tty = tty_port_tty_get(pport);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+}
+
+/**
+ * ifx_spi_timeout - SPI timeout
+ * @arg: our SPI device
+ *
+ * The SPI has timed out: hang up the tty. Users will then see a hangup
+ * and error events.
+ */
+static void ifx_spi_timeout(unsigned long arg)
+{
+ struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg;
+
+ dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***");
+ ifx_spi_ttyhangup(ifx_dev);
+ mrdy_set_low(ifx_dev);
+ clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+}
+
+/* char/tty operations */
+
+/**
+ * ifx_spi_tiocmget - get modem lines
+ * @tty: our tty device
+ * @filp: file handle issuing the request
+ *
+ * Map the signal state into Linux modem flags and report the value
+ * in Linux terms
+ */
+static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+{
+ unsigned int value;
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+
+ value =
+ (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) |
+ (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) |
+ (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) |
+ (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) |
+ (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) |
+ (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0);
+ return value;
+}
+
+/**
+ * ifx_spi_tiocmset - set modem bits
+ * @tty: the tty structure
+ * @filp: file handle issuing the request
+ * @set: bits to set
+ * @clear: bits to clear
+ *
+ * The IFX6x60 only supports DTR and RTS. Set them accordingly
+ * and flag that an update to the modem is needed.
+ *
+ * FIXME: do we need to kick the tranfers when we do this ?
+ */
+static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+ unsigned int set, unsigned int clear)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+
+ if (set & TIOCM_RTS)
+ set_bit(IFX_SPI_RTS, &ifx_dev->signal_state);
+ if (set & TIOCM_DTR)
+ set_bit(IFX_SPI_DTR, &ifx_dev->signal_state);
+ if (clear & TIOCM_RTS)
+ clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state);
+ if (clear & TIOCM_DTR)
+ clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state);
+
+ set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state);
+ return 0;
+}
+
+/**
+ * ifx_spi_open - called on tty open
+ * @tty: our tty device
+ * @filp: file handle being associated with the tty
+ *
+ * Open the tty interface. We let the tty_port layer do all the work
+ * for us.
+ *
+ * FIXME: Remove single device assumption and saved_ifx_dev
+ */
+static int ifx_spi_open(struct tty_struct *tty, struct file *filp)
+{
+ return tty_port_open(&saved_ifx_dev->tty_port, tty, filp);
+}
+
+/**
+ * ifx_spi_close - called when our tty closes
+ * @tty: the tty being closed
+ * @filp: the file handle being closed
+ *
+ * Perform the close of the tty. We use the tty_port layer to do all
+ * our hard work.
+ */
+static void ifx_spi_close(struct tty_struct *tty, struct file *filp)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+ tty_port_close(&ifx_dev->tty_port, tty, filp);
+ /* FIXME: should we do an ifx_spi_reset here ? */
+}
+
+/**
+ * ifx_decode_spi_header - decode received header
+ * @buffer: the received data
+ * @length: decoded length
+ * @more: decoded more flag
+ * @received_cts: status of cts we received
+ *
+ * Note how received_cts is handled -- if header is all F it is left
+ * the same as it was, if header is all 0 it is set to 0 otherwise it is
+ * taken from the incoming header.
+ *
+ * FIXME: endianness
+ */
+static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length,
+ unsigned char *more, unsigned char *received_cts)
+{
+ u16 h1;
+ u16 h2;
+ u16 *in_buffer = (u16 *)buffer;
+
+ h1 = *in_buffer;
+ h2 = *(in_buffer+1);
+
+ if (h1 == 0 && h2 == 0) {
+ *received_cts = 0;
+ return IFX_SPI_HEADER_0;
+ } else if (h1 == 0xffff && h2 == 0xffff) {
+ /* spi_slave_cts remains as it was */
+ return IFX_SPI_HEADER_F;
+ }
+
+ *length = h1 & 0xfff; /* upper bits of byte are flags */
+ *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1;
+ *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1;
+ return 0;
+}
+
+/**
+ * ifx_setup_spi_header - set header fields
+ * @txbuffer: pointer to start of SPI buffer
+ * @tx_count: bytes
+ * @more: indicate if more to follow
+ *
+ * Format up an SPI header for a transfer
+ *
+ * FIXME: endianness?
+ */
+static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count,
+ unsigned char more)
+{
+ *(u16 *)(txbuffer) = tx_count;
+ *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE;
+ txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK;
+}
+
+/**
+ * ifx_spi_wakeup_serial - SPI space made
+ * @port_data: our SPI device
+ *
+ * We have emptied the FIFO enough that we want to get more data
+ * queued into it. Poke the line discipline via tty_wakeup so that
+ * it will feed us more bits
+ */
+static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev)
+{
+ struct tty_struct *tty;
+
+ tty = tty_port_tty_get(&ifx_dev->tty_port);
+ if (!tty)
+ return;
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+}
+
+/**
+ * ifx_spi_prepare_tx_buffer - prepare transmit frame
+ * @ifx_dev: our SPI device
+ *
+ * The transmit buffr needs a header and various other bits of
+ * information followed by as much data as we can pull from the FIFO
+ * and transfer. This function formats up a suitable buffer in the
+ * ifx_dev->tx_buffer
+ *
+ * FIXME: performance - should we wake the tty when the queue is half
+ * empty ?
+ */
+static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev)
+{
+ int temp_count;
+ int queue_length;
+ int tx_count;
+ unsigned char *tx_buffer;
+
+ tx_buffer = ifx_dev->tx_buffer;
+ memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE);
+
+ /* make room for required SPI header */
+ tx_buffer += IFX_SPI_HEADER_OVERHEAD;
+ tx_count = IFX_SPI_HEADER_OVERHEAD;
+
+ /* clear to signal no more data if this turns out to be the
+ * last buffer sent in a sequence */
+ ifx_dev->spi_more = 0;
+
+ /* if modem cts is set, just send empty buffer */
+ if (!ifx_dev->spi_slave_cts) {
+ /* see if there's tx data */
+ queue_length = kfifo_len(&ifx_dev->tx_fifo);
+ if (queue_length != 0) {
+ /* data to mux -- see if there's room for it */
+ temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE);
+ temp_count = kfifo_out_locked(&ifx_dev->tx_fifo,
+ tx_buffer, temp_count,
+ &ifx_dev->fifo_lock);
+
+ /* update buffer pointer and data count in message */
+ tx_buffer += temp_count;
+ tx_count += temp_count;
+ if (temp_count == queue_length)
+ /* poke port to get more data */
+ ifx_spi_wakeup_serial(ifx_dev);
+ else /* more data in port, use next SPI message */
+ ifx_dev->spi_more = 1;
+ }
+ }
+ /* have data and info for header -- set up SPI header in buffer */
+ /* spi header needs payload size, not entire buffer size */
+ ifx_spi_setup_spi_header(ifx_dev->tx_buffer,
+ tx_count-IFX_SPI_HEADER_OVERHEAD,
+ ifx_dev->spi_more);
+ /* swap actual data in the buffer */
+ swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count,
+ &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]);
+ return tx_count;
+}
+
+/**
+ * ifx_spi_write - line discipline write
+ * @tty: our tty device
+ * @buf: pointer to buffer to write (kernel space)
+ * @count: size of buffer
+ *
+ * Write the characters we have been given into the FIFO. If the device
+ * is not active then activate it, when the SRDY line is asserted back
+ * this will commence I/O
+ */
+static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf,
+ int count)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+ unsigned char *tmp_buf = (unsigned char *)buf;
+ int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count,
+ &ifx_dev->fifo_lock);
+ mrdy_assert(ifx_dev);
+ return tx_count;
+}
+
+/**
+ * ifx_spi_chars_in_buffer - line discipline helper
+ * @tty: our tty device
+ *
+ * Report how much data we can accept before we drop bytes. As we use
+ * a simple FIFO this is nice and easy.
+ */
+static int ifx_spi_write_room(struct tty_struct *tty)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+ return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo);
+}
+
+/**
+ * ifx_spi_chars_in_buffer - line discipline helper
+ * @tty: our tty device
+ *
+ * Report how many characters we have buffered. In our case this is the
+ * number of bytes sitting in our transmit FIFO.
+ */
+static int ifx_spi_chars_in_buffer(struct tty_struct *tty)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+ return kfifo_len(&ifx_dev->tx_fifo);
+}
+
+/**
+ * ifx_port_hangup
+ * @port: our tty port
+ *
+ * tty port hang up. Called when tty_hangup processing is invoked either
+ * by loss of carrier, or by software (eg vhangup). Serialized against
+ * activate/shutdown by the tty layer.
+ */
+static void ifx_spi_hangup(struct tty_struct *tty)
+{
+ struct ifx_spi_device *ifx_dev = tty->driver_data;
+ tty_port_hangup(&ifx_dev->tty_port);
+}
+
+/**
+ * ifx_port_activate
+ * @port: our tty port
+ *
+ * tty port activate method - called for first open. Serialized
+ * with hangup and shutdown by the tty layer.
+ */
+static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct ifx_spi_device *ifx_dev =
+ container_of(port, struct ifx_spi_device, tty_port);
+
+ /* clear any old data; can't do this in 'close' */
+ kfifo_reset(&ifx_dev->tx_fifo);
+
+ /* put port data into this tty */
+ tty->driver_data = ifx_dev;
+
+ /* allows flip string push from int context */
+ tty->low_latency = 1;
+
+ return 0;
+}
+
+/**
+ * ifx_port_shutdown
+ * @port: our tty port
+ *
+ * tty port shutdown method - called for last port close. Serialized
+ * with hangup and activate by the tty layer.
+ */
+static void ifx_port_shutdown(struct tty_port *port)
+{
+ struct ifx_spi_device *ifx_dev =
+ container_of(port, struct ifx_spi_device, tty_port);
+
+ mrdy_set_low(ifx_dev);
+ clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+ tasklet_kill(&ifx_dev->io_work_tasklet);
+}
+
+static const struct tty_port_operations ifx_tty_port_ops = {
+ .activate = ifx_port_activate,
+ .shutdown = ifx_port_shutdown,
+};
+
+static const struct tty_operations ifx_spi_serial_ops = {
+ .open = ifx_spi_open,
+ .close = ifx_spi_close,
+ .write = ifx_spi_write,
+ .hangup = ifx_spi_hangup,
+ .write_room = ifx_spi_write_room,
+ .chars_in_buffer = ifx_spi_chars_in_buffer,
+ .tiocmget = ifx_spi_tiocmget,
+ .tiocmset = ifx_spi_tiocmset,
+};
+
+/**
+ * ifx_spi_insert_fip_string - queue received data
+ * @ifx_ser: our SPI device
+ * @chars: buffer we have received
+ * @size: number of chars reeived
+ *
+ * Queue bytes to the tty assuming the tty side is currently open. If
+ * not the discard the data.
+ */
+static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev,
+ unsigned char *chars, size_t size)
+{
+ struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port);
+ if (!tty)
+ return;
+ tty_insert_flip_string(tty, chars, size);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+/**
+ * ifx_spi_complete - SPI transfer completed
+ * @ctx: our SPI device
+ *
+ * An SPI transfer has completed. Process any received data and kick off
+ * any further transmits we can commence.
+ */
+static void ifx_spi_complete(void *ctx)
+{
+ struct ifx_spi_device *ifx_dev = ctx;
+ struct tty_struct *tty;
+ struct tty_ldisc *ldisc = NULL;
+ int length;
+ int actual_length;
+ unsigned char more;
+ unsigned char cts;
+ int local_write_pending = 0;
+ int queue_length;
+ int srdy;
+ int decode_result;
+
+ mrdy_set_low(ifx_dev);
+
+ if (!ifx_dev->spi_msg.status) {
+ /* check header validity, get comm flags */
+ swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
+ &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]);
+ decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer,
+ &length, &more, &cts);
+ if (decode_result == IFX_SPI_HEADER_0) {
+ dev_dbg(&ifx_dev->spi_dev->dev,
+ "ignore input: invalid header 0");
+ ifx_dev->spi_slave_cts = 0;
+ goto complete_exit;
+ } else if (decode_result == IFX_SPI_HEADER_F) {
+ dev_dbg(&ifx_dev->spi_dev->dev,
+ "ignore input: invalid header F");
+ goto complete_exit;
+ }
+
+ ifx_dev->spi_slave_cts = cts;
+
+ actual_length = min((unsigned int)length,
+ ifx_dev->spi_msg.actual_length);
+ swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
+ actual_length,
+ &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]);
+ ifx_spi_insert_flip_string(
+ ifx_dev,
+ ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD,
+ (size_t)actual_length);
+ } else {
+ dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d",
+ ifx_dev->spi_msg.status);
+ }
+
+complete_exit:
+ if (ifx_dev->write_pending) {
+ ifx_dev->write_pending = 0;
+ local_write_pending = 1;
+ }
+
+ clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags));
+
+ queue_length = kfifo_len(&ifx_dev->tx_fifo);
+ srdy = gpio_get_value(ifx_dev->gpio.srdy);
+ if (!srdy)
+ ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY);
+
+ /* schedule output if there is more to do */
+ if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags))
+ tasklet_schedule(&ifx_dev->io_work_tasklet);
+ else {
+ if (more || ifx_dev->spi_more || queue_length > 0 ||
+ local_write_pending) {
+ if (ifx_dev->spi_slave_cts) {
+ if (more)
+ mrdy_assert(ifx_dev);
+ } else
+ mrdy_assert(ifx_dev);
+ } else {
+ /*
+ * poke line discipline driver if any for more data
+ * may or may not get more data to write
+ * for now, say not busy
+ */
+ ifx_spi_power_state_clear(ifx_dev,
+ IFX_SPI_POWER_DATA_PENDING);
+ tty = tty_port_tty_get(&ifx_dev->tty_port);
+ if (tty) {
+ ldisc = tty_ldisc_ref(tty);
+ if (ldisc) {
+ ldisc->ops->write_wakeup(tty);
+ tty_ldisc_deref(ldisc);
+ }
+ tty_kref_put(tty);
+ }
+ }
+ }
+}
+
+/**
+ * ifx_spio_io - I/O tasklet
+ * @data: our SPI device
+ *
+ * Queue data for transmission if possible and then kick off the
+ * transfer.
+ */
+static void ifx_spi_io(unsigned long data)
+{
+ int retval;
+ struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data;
+
+ if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) {
+ if (ifx_dev->gpio.unack_srdy_int_nb > 0)
+ ifx_dev->gpio.unack_srdy_int_nb--;
+
+ ifx_spi_prepare_tx_buffer(ifx_dev);
+
+ spi_message_init(&ifx_dev->spi_msg);
+ INIT_LIST_HEAD(&ifx_dev->spi_msg.queue);
+
+ ifx_dev->spi_msg.context = ifx_dev;
+ ifx_dev->spi_msg.complete = ifx_spi_complete;
+
+ /* set up our spi transfer */
+ /* note len is BYTES, not transfers */
+ ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
+ ifx_dev->spi_xfer.cs_change = 0;
+ ifx_dev->spi_xfer.speed_hz = 12500000;
+ /* ifx_dev->spi_xfer.speed_hz = 390625; */
+ ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+
+ ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
+ ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
+
+ /*
+ * setup dma pointers
+ */
+ if (ifx_dev->is_6160) {
+ ifx_dev->spi_msg.is_dma_mapped = 1;
+ ifx_dev->tx_dma = ifx_dev->tx_bus;
+ ifx_dev->rx_dma = ifx_dev->rx_bus;
+ ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma;
+ ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma;
+ } else {
+ ifx_dev->spi_msg.is_dma_mapped = 0;
+ ifx_dev->tx_dma = (dma_addr_t)0;
+ ifx_dev->rx_dma = (dma_addr_t)0;
+ ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0;
+ ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0;
+ }
+
+ spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg);
+
+ /* Assert MRDY. This may have already been done by the write
+ * routine.
+ */
+ mrdy_assert(ifx_dev);
+
+ retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg);
+ if (retval) {
+ clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS,
+ &ifx_dev->flags);
+ tasklet_schedule(&ifx_dev->io_work_tasklet);
+ return;
+ }
+ } else
+ ifx_dev->write_pending = 1;
+}
+
+/**
+ * ifx_spi_free_port - free up the tty side
+ * @ifx_dev: IFX device going away
+ *
+ * Unregister and free up a port when the device goes away
+ */
+static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev)
+{
+ if (ifx_dev->tty_dev)
+ tty_unregister_device(tty_drv, ifx_dev->minor);
+ kfifo_free(&ifx_dev->tx_fifo);
+}
+
+/**
+ * ifx_spi_create_port - create a new port
+ * @ifx_dev: our spi device
+ *
+ * Allocate and initialise the tty port that goes with this interface
+ * and add it to the tty layer so that it can be opened.
+ */
+static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
+{
+ int ret = 0;
+ struct tty_port *pport = &ifx_dev->tty_port;
+
+ spin_lock_init(&ifx_dev->fifo_lock);
+ lockdep_set_class_and_subclass(&ifx_dev->fifo_lock,
+ &ifx_spi_key, 0);
+
+ if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ pport->ops = &ifx_tty_port_ops;
+ tty_port_init(pport);
+ ifx_dev->minor = IFX_SPI_TTY_ID;
+ ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
+ &ifx_dev->spi_dev->dev);
+ if (IS_ERR(ifx_dev->tty_dev)) {
+ dev_dbg(&ifx_dev->spi_dev->dev,
+ "%s: registering tty device failed", __func__);
+ ret = PTR_ERR(ifx_dev->tty_dev);
+ goto error_ret;
+ }
+ return 0;
+
+error_ret:
+ ifx_spi_free_port(ifx_dev);
+ return ret;
+}
+
+/**
+ * ifx_spi_handle_srdy - handle SRDY
+ * @ifx_dev: device asserting SRDY
+ *
+ * Check our device state and see what we need to kick off when SRDY
+ * is asserted. This usually means killing the timer and firing off the
+ * I/O processing.
+ */
+static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev)
+{
+ if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) {
+ del_timer_sync(&ifx_dev->spi_timer);
+ clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+ }
+
+ ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY);
+
+ if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags))
+ tasklet_schedule(&ifx_dev->io_work_tasklet);
+ else
+ set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags);
+}
+
+/**
+ * ifx_spi_srdy_interrupt - SRDY asserted
+ * @irq: our IRQ number
+ * @dev: our ifx device
+ *
+ * The modem asserted SRDY. Handle the srdy event
+ */
+static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev)
+{
+ struct ifx_spi_device *ifx_dev = dev;
+ ifx_dev->gpio.unack_srdy_int_nb++;
+ ifx_spi_handle_srdy(ifx_dev);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ifx_spi_reset_interrupt - Modem has changed reset state
+ * @irq: interrupt number
+ * @dev: our device pointer
+ *
+ * The modem has either entered or left reset state. Check the GPIO
+ * line to see which.
+ *
+ * FIXME: review locking on MR_INPROGRESS versus
+ * parallel unsolicited reset/solicited reset
+ */
+static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev)
+{
+ struct ifx_spi_device *ifx_dev = dev;
+ int val = gpio_get_value(ifx_dev->gpio.reset_out);
+ int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state);
+
+ if (val == 0) {
+ /* entered reset */
+ set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state);
+ if (!solreset) {
+ /* unsolicited reset */
+ ifx_spi_ttyhangup(ifx_dev);
+ }
+ } else {
+ /* exited reset */
+ clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state);
+ if (solreset) {
+ set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state);
+ wake_up(&ifx_dev->mdm_reset_wait);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * ifx_spi_free_device - free device
+ * @ifx_dev: device to free
+ *
+ * Free the IFX device
+ */
+static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev)
+{
+ ifx_spi_free_port(ifx_dev);
+ dma_free_coherent(&ifx_dev->spi_dev->dev,
+ IFX_SPI_TRANSFER_SIZE,
+ ifx_dev->tx_buffer,
+ ifx_dev->tx_bus);
+ dma_free_coherent(&ifx_dev->spi_dev->dev,
+ IFX_SPI_TRANSFER_SIZE,
+ ifx_dev->rx_buffer,
+ ifx_dev->rx_bus);
+}
+
+/**
+ * ifx_spi_reset - reset modem
+ * @ifx_dev: modem to reset
+ *
+ * Perform a reset on the modem
+ */
+static int ifx_spi_reset(struct ifx_spi_device *ifx_dev)
+{
+ int ret;
+ /*
+ * set up modem power, reset
+ *
+ * delays are required on some platforms for the modem
+ * to reset properly
+ */
+ set_bit(MR_START, &ifx_dev->mdm_reset_state);
+ gpio_set_value(ifx_dev->gpio.po, 0);
+ gpio_set_value(ifx_dev->gpio.reset, 0);
+ msleep(25);
+ gpio_set_value(ifx_dev->gpio.reset, 1);
+ msleep(1);
+ gpio_set_value(ifx_dev->gpio.po, 1);
+ msleep(1);
+ gpio_set_value(ifx_dev->gpio.po, 0);
+ ret = wait_event_timeout(ifx_dev->mdm_reset_wait,
+ test_bit(MR_COMPLETE,
+ &ifx_dev->mdm_reset_state),
+ IFX_RESET_TIMEOUT);
+ if (!ret)
+ dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)",
+ ifx_dev->mdm_reset_state);
+
+ ifx_dev->mdm_reset_state = 0;
+ return ret;
+}
+
+/**
+ * ifx_spi_spi_probe - probe callback
+ * @spi: our possible matching SPI device
+ *
+ * Probe for a 6x60 modem on SPI bus. Perform any needed device and
+ * GPIO setup.
+ *
+ * FIXME:
+ * - Support for multiple devices
+ * - Split out MID specific GPIO handling eventually
+ */
+
+static int ifx_spi_spi_probe(struct spi_device *spi)
+{
+ int ret;
+ int srdy;
+ struct ifx_modem_platform_data *pl_data = NULL;
+ struct ifx_spi_device *ifx_dev;
+
+ if (saved_ifx_dev) {
+ dev_dbg(&spi->dev, "ignoring subsequent detection");
+ return -ENODEV;
+ }
+
+ /* initialize structure to hold our device variables */
+ ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
+ if (!ifx_dev) {
+ dev_err(&spi->dev, "spi device allocation failed");
+ return -ENOMEM;
+ }
+ saved_ifx_dev = ifx_dev;
+ ifx_dev->spi_dev = spi;
+ clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags);
+ spin_lock_init(&ifx_dev->write_lock);
+ spin_lock_init(&ifx_dev->power_lock);
+ ifx_dev->power_status = 0;
+ init_timer(&ifx_dev->spi_timer);
+ ifx_dev->spi_timer.function = ifx_spi_timeout;
+ ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
+ ifx_dev->is_6160 = pl_data->is_6160;
+
+ /* ensure SPI protocol flags are initialized to enable transfer */
+ ifx_dev->spi_more = 0;
+ ifx_dev->spi_slave_cts = 0;
+
+ /*initialize transfer and dma buffers */
+ ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+ IFX_SPI_TRANSFER_SIZE,
+ &ifx_dev->tx_bus,
+ GFP_KERNEL);
+ if (!ifx_dev->tx_buffer) {
+ dev_err(&spi->dev, "DMA-TX buffer allocation failed");
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+ IFX_SPI_TRANSFER_SIZE,
+ &ifx_dev->rx_bus,
+ GFP_KERNEL);
+ if (!ifx_dev->rx_buffer) {
+ dev_err(&spi->dev, "DMA-RX buffer allocation failed");
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ /* initialize waitq for modem reset */
+ init_waitqueue_head(&ifx_dev->mdm_reset_wait);
+
+ spi_set_drvdata(spi, ifx_dev);
+ tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io,
+ (unsigned long)ifx_dev);
+
+ set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags);
+
+ /* create our tty port */
+ ret = ifx_spi_create_port(ifx_dev);
+ if (ret != 0) {
+ dev_err(&spi->dev, "create default tty port failed");
+ goto error_ret;
+ }
+
+ pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+ if (pl_data) {
+ ifx_dev->gpio.reset = pl_data->rst_pmu;
+ ifx_dev->gpio.po = pl_data->pwr_on;
+ ifx_dev->gpio.mrdy = pl_data->mrdy;
+ ifx_dev->gpio.srdy = pl_data->srdy;
+ ifx_dev->gpio.reset_out = pl_data->rst_out;
+ } else {
+ dev_err(&spi->dev, "missing platform data!");
+ ret = -ENODEV;
+ goto error_ret;
+ }
+
+ dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
+ ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
+ ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out);
+
+ /* Configure gpios */
+ ret = gpio_request(ifx_dev->gpio.reset, "ifxModem");
+ if (ret < 0) {
+ dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)",
+ ifx_dev->gpio.reset);
+ goto error_ret;
+ }
+ ret += gpio_direction_output(ifx_dev->gpio.reset, 0);
+ ret += gpio_export(ifx_dev->gpio.reset, 1);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)",
+ ifx_dev->gpio.reset);
+ ret = -EBUSY;
+ goto error_ret2;
+ }
+
+ ret = gpio_request(ifx_dev->gpio.po, "ifxModem");
+ ret += gpio_direction_output(ifx_dev->gpio.po, 0);
+ ret += gpio_export(ifx_dev->gpio.po, 1);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to configure GPIO%d (ON)",
+ ifx_dev->gpio.po);
+ ret = -EBUSY;
+ goto error_ret3;
+ }
+
+ ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem");
+ if (ret < 0) {
+ dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)",
+ ifx_dev->gpio.mrdy);
+ goto error_ret3;
+ }
+ ret += gpio_export(ifx_dev->gpio.mrdy, 1);
+ ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)",
+ ifx_dev->gpio.mrdy);
+ ret = -EBUSY;
+ goto error_ret4;
+ }
+
+ ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem");
+ if (ret < 0) {
+ dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)",
+ ifx_dev->gpio.srdy);
+ ret = -EBUSY;
+ goto error_ret4;
+ }
+ ret += gpio_export(ifx_dev->gpio.srdy, 1);
+ ret += gpio_direction_input(ifx_dev->gpio.srdy);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)",
+ ifx_dev->gpio.srdy);
+ ret = -EBUSY;
+ goto error_ret5;
+ }
+
+ ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem");
+ if (ret < 0) {
+ dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)",
+ ifx_dev->gpio.reset_out);
+ goto error_ret5;
+ }
+ ret += gpio_export(ifx_dev->gpio.reset_out, 1);
+ ret += gpio_direction_input(ifx_dev->gpio.reset_out);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)",
+ ifx_dev->gpio.reset_out);
+ ret = -EBUSY;
+ goto error_ret6;
+ }
+
+ ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out),
+ ifx_spi_reset_interrupt,
+ IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME,
+ (void *)ifx_dev);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to get irq %x\n",
+ gpio_to_irq(ifx_dev->gpio.reset_out));
+ goto error_ret6;
+ }
+
+ ret = ifx_spi_reset(ifx_dev);
+
+ ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy),
+ ifx_spi_srdy_interrupt,
+ IRQF_TRIGGER_RISING, DRVNAME,
+ (void *)ifx_dev);
+ if (ret) {
+ dev_err(&spi->dev, "Unable to get irq %x",
+ gpio_to_irq(ifx_dev->gpio.srdy));
+ goto error_ret7;
+ }
+
+ /* set pm runtime power state and register with power system */
+ pm_runtime_set_active(&spi->dev);
+ pm_runtime_enable(&spi->dev);
+
+ /* handle case that modem is already signaling SRDY */
+ /* no outgoing tty open at this point, this just satisfies the
+ * modem's read and should reset communication properly
+ */
+ srdy = gpio_get_value(ifx_dev->gpio.srdy);
+
+ if (srdy) {
+ mrdy_assert(ifx_dev);
+ ifx_spi_handle_srdy(ifx_dev);
+ } else
+ mrdy_set_low(ifx_dev);
+ return 0;
+
+error_ret7:
+ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+error_ret6:
+ gpio_free(ifx_dev->gpio.srdy);
+error_ret5:
+ gpio_free(ifx_dev->gpio.mrdy);
+error_ret4:
+ gpio_free(ifx_dev->gpio.reset);
+error_ret3:
+ gpio_free(ifx_dev->gpio.po);
+error_ret2:
+ gpio_free(ifx_dev->gpio.reset_out);
+error_ret:
+ ifx_spi_free_device(ifx_dev);
+ saved_ifx_dev = NULL;
+ return ret;
+}
+
+/**
+ * ifx_spi_spi_remove - SPI device was removed
+ * @spi: SPI device
+ *
+ * FIXME: We should be shutting the device down here not in
+ * the module unload path.
+ */
+
+static int ifx_spi_spi_remove(struct spi_device *spi)
+{
+ struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+ /* stop activity */
+ tasklet_kill(&ifx_dev->io_work_tasklet);
+ /* free irq */
+ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+ free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev);
+
+ gpio_free(ifx_dev->gpio.srdy);
+ gpio_free(ifx_dev->gpio.mrdy);
+ gpio_free(ifx_dev->gpio.reset);
+ gpio_free(ifx_dev->gpio.po);
+ gpio_free(ifx_dev->gpio.reset_out);
+
+ /* free allocations */
+ ifx_spi_free_device(ifx_dev);
+
+ saved_ifx_dev = NULL;
+ return 0;
+}
+
+/**
+ * ifx_spi_spi_shutdown - called on SPI shutdown
+ * @spi: SPI device
+ *
+ * No action needs to be taken here
+ */
+
+static void ifx_spi_spi_shutdown(struct spi_device *spi)
+{
+}
+
+/*
+ * various suspends and resumes have nothing to do
+ * no hardware to save state for
+ */
+
+/**
+ * ifx_spi_spi_suspend - suspend SPI on system suspend
+ * @dev: device being suspended
+ *
+ * Suspend the SPI side. No action needed on Intel MID platforms, may
+ * need extending for other systems.
+ */
+static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_spi_resume - resume SPI side on system resume
+ * @dev: device being suspended
+ *
+ * Suspend the SPI side. No action needed on Intel MID platforms, may
+ * need extending for other systems.
+ */
+static int ifx_spi_spi_resume(struct spi_device *spi)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_pm_suspend - suspend modem on system suspend
+ * @dev: device being suspended
+ *
+ * Suspend the modem. No action needed on Intel MID platforms, may
+ * need extending for other systems.
+ */
+static int ifx_spi_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_pm_resume - resume modem on system resume
+ * @dev: device being suspended
+ *
+ * Allow the modem to resume. No action needed.
+ *
+ * FIXME: do we need to reset anything here ?
+ */
+static int ifx_spi_pm_resume(struct device *dev)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_pm_runtime_resume - suspend modem
+ * @dev: device being suspended
+ *
+ * Allow the modem to resume. No action needed.
+ */
+static int ifx_spi_pm_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_pm_runtime_suspend - suspend modem
+ * @dev: device being suspended
+ *
+ * Allow the modem to suspend and thus suspend to continue up the
+ * device tree.
+ */
+static int ifx_spi_pm_runtime_suspend(struct device *dev)
+{
+ return 0;
+}
+
+/**
+ * ifx_spi_pm_runtime_idle - check if modem idle
+ * @dev: our device
+ *
+ * Check conditions and queue runtime suspend if idle.
+ */
+static int ifx_spi_pm_runtime_idle(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+
+ if (!ifx_dev->power_status)
+ pm_runtime_suspend(dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ifx_spi_pm = {
+ .resume = ifx_spi_pm_resume,
+ .suspend = ifx_spi_pm_suspend,
+ .runtime_resume = ifx_spi_pm_runtime_resume,
+ .runtime_suspend = ifx_spi_pm_runtime_suspend,
+ .runtime_idle = ifx_spi_pm_runtime_idle
+};
+
+static const struct spi_device_id ifx_id_table[] = {
+ {"ifx6160", 0},
+ {"ifx6260", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ifx_id_table);
+
+/* spi operations */
+static const struct spi_driver ifx_spi_driver_6160 = {
+ .driver = {
+ .name = "ifx6160",
+ .bus = &spi_bus_type,
+ .pm = &ifx_spi_pm,
+ .owner = THIS_MODULE},
+ .probe = ifx_spi_spi_probe,
+ .shutdown = ifx_spi_spi_shutdown,
+ .remove = __devexit_p(ifx_spi_spi_remove),
+ .suspend = ifx_spi_spi_suspend,
+ .resume = ifx_spi_spi_resume,
+ .id_table = ifx_id_table
+};
+
+/**
+ * ifx_spi_exit - module exit
+ *
+ * Unload the module.
+ */
+
+static void __exit ifx_spi_exit(void)
+{
+ /* unregister */
+ tty_unregister_driver(tty_drv);
+ spi_unregister_driver((void *)&ifx_spi_driver_6160);
+}
+
+/**
+ * ifx_spi_init - module entry point
+ *
+ * Initialise the SPI and tty interfaces for the IFX SPI driver
+ * We need to initialize upper-edge spi driver after the tty
+ * driver because otherwise the spi probe will race
+ */
+
+static int __init ifx_spi_init(void)
+{
+ int result;
+
+ tty_drv = alloc_tty_driver(1);
+ if (!tty_drv) {
+ pr_err("%s: alloc_tty_driver failed", DRVNAME);
+ return -ENOMEM;
+ }
+
+ tty_drv->magic = TTY_DRIVER_MAGIC;
+ tty_drv->owner = THIS_MODULE;
+ tty_drv->driver_name = DRVNAME;
+ tty_drv->name = TTYNAME;
+ tty_drv->minor_start = IFX_SPI_TTY_ID;
+ tty_drv->num = 1;
+ tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+ tty_drv->subtype = SERIAL_TYPE_NORMAL;
+ tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_drv->init_termios = tty_std_termios;
+
+ tty_set_operations(tty_drv, &ifx_spi_serial_ops);
+
+ result = tty_register_driver(tty_drv);
+ if (result) {
+ pr_err("%s: tty_register_driver failed(%d)",
+ DRVNAME, result);
+ put_tty_driver(tty_drv);
+ return result;
+ }
+
+ result = spi_register_driver((void *)&ifx_spi_driver_6160);
+ if (result) {
+ pr_err("%s: spi_register_driver failed(%d)",
+ DRVNAME, result);
+ tty_unregister_driver(tty_drv);
+ }
+ return result;
+}
+
+module_init(ifx_spi_init);
+module_exit(ifx_spi_exit);
+
+MODULE_AUTHOR("Intel");
+MODULE_DESCRIPTION("IFX6x60 spi driver");
+MODULE_LICENSE("GPL");
+MODULE_INFO(Version, "0.1-IFX6x60");
diff --git a/drivers/serial/ifx6x60.h b/drivers/serial/ifx6x60.h
new file mode 100644
index 0000000..deb7b8d
--- /dev/null
+++ b/drivers/serial/ifx6x60.h
@@ -0,0 +1,129 @@
+/****************************************************************************
+ *
+ * Driver for the IFX spi modem.
+ *
+ * Copyright (C) 2009, 2010 Intel Corp
+ * Jim Stanley <jim.stanley@intel.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA
+ *
+ *
+ *
+ *****************************************************************************/
+#ifndef _IFX6X60_H
+#define _IFX6X60_H
+
+#define DRVNAME "ifx6x60"
+#define TTYNAME "ttyIFX"
+
+/* #define IFX_THROTTLE_CODE */
+
+#define IFX_SPI_MAX_MINORS 1
+#define IFX_SPI_TRANSFER_SIZE 2048
+#define IFX_SPI_FIFO_SIZE 4096
+
+#define IFX_SPI_HEADER_OVERHEAD 4
+#define IFX_RESET_TIMEOUT msecs_to_jiffies(50)
+
+/* device flags bitfield definitions */
+#define IFX_SPI_STATE_PRESENT 0
+#define IFX_SPI_STATE_IO_IN_PROGRESS 1
+#define IFX_SPI_STATE_IO_READY 2
+#define IFX_SPI_STATE_TIMER_PENDING 3
+
+/* flow control bitfields */
+#define IFX_SPI_DCD 0
+#define IFX_SPI_CTS 1
+#define IFX_SPI_DSR 2
+#define IFX_SPI_RI 3
+#define IFX_SPI_DTR 4
+#define IFX_SPI_RTS 5
+#define IFX_SPI_TX_FC 6
+#define IFX_SPI_RX_FC 7
+#define IFX_SPI_UPDATE 8
+
+#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \
+ IFX_SPI_HEADER_OVERHEAD)
+
+#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING
+#define IFX_SPI_GPIO_TARGET 0
+#define IFX_SPI_GPIO0 0x105
+
+#define IFX_SPI_STATUS_TIMEOUT (2000*HZ)
+
+/* values for bits in power status byte */
+#define IFX_SPI_POWER_DATA_PENDING 1
+#define IFX_SPI_POWER_SRDY 2
+
+struct ifx_spi_device {
+ /* Our SPI device */
+ struct spi_device *spi_dev;
+
+ /* Port specific data */
+ struct kfifo tx_fifo;
+ spinlock_t fifo_lock;
+ unsigned long signal_state;
+
+ /* TTY Layer logic */
+ struct tty_port tty_port;
+ struct device *tty_dev;
+ int minor;
+
+ /* Low level I/O work */
+ struct tasklet_struct io_work_tasklet;
+ unsigned long flags;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+
+ int is_6160; /* Modem type */
+
+ spinlock_t write_lock;
+ int write_pending;
+ spinlock_t power_lock;
+ unsigned char power_status;
+
+ unsigned char *rx_buffer;
+ unsigned char *tx_buffer;
+ dma_addr_t rx_bus;
+ dma_addr_t tx_bus;
+ unsigned char spi_more;
+ unsigned char spi_slave_cts;
+
+ struct timer_list spi_timer;
+
+ struct spi_message spi_msg;
+ struct spi_transfer spi_xfer;
+
+ struct {
+ /* gpio lines */
+ unsigned short srdy; /* slave-ready gpio */
+ unsigned short mrdy; /* master-ready gpio */
+ unsigned short reset; /* modem-reset gpio */
+ unsigned short po; /* modem-on gpio */
+ unsigned short reset_out; /* modem-in-reset gpio */
+ /* state/stats */
+ int unack_srdy_int_nb;
+ } gpio;
+
+ /* modem reset */
+ unsigned long mdm_reset_state;
+#define MR_START 0
+#define MR_INPROGRESS 1
+#define MR_COMPLETE 2
+ wait_queue_head_t mdm_reset_wait;
+};
+
+#endif /* _IFX6X60_H */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index c4399e2..126ec7f 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -838,7 +838,11 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
static const char *
mpc52xx_uart_type(struct uart_port *port)
{
- return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
+ /*
+ * We keep using PORT_MPC52xx for historic reasons although it applies
+ * for MPC512x, too, but print "MPC5xxx" to not irritate users
+ */
+ return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL;
}
static void
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
index 1201eff..7f2f010 100644
--- a/drivers/serial/omap-serial.c
+++ b/drivers/serial/omap-serial.c
@@ -866,12 +866,6 @@ serial_omap_type(struct uart_port *port)
return up->name;
}
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-
-static struct uart_omap_port *serial_omap_console_ports[4];
-
-static struct uart_driver serial_omap_reg;
-
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static inline void wait_for_xmitr(struct uart_omap_port *up)
@@ -905,6 +899,34 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
}
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
+static int serial_omap_poll_get_char(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned int status = serial_in(up, UART_LSR);
+
+ if (!(status & UART_LSR_DR))
+ return NO_POLL_CHAR;
+
+ return serial_in(up, UART_RX);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+
+static struct uart_omap_port *serial_omap_console_ports[4];
+
+static struct uart_driver serial_omap_reg;
+
static void serial_omap_console_putchar(struct uart_port *port, int ch)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
@@ -1022,6 +1044,10 @@ static struct uart_ops serial_omap_pops = {
.request_port = serial_omap_request_port,
.config_port = serial_omap_config_port,
.verify_port = serial_omap_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_put_char = serial_omap_poll_put_char,
+ .poll_get_char = serial_omap_poll_get_char,
+#endif
};
static struct uart_driver serial_omap_reg = {
diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c
new file mode 100644
index 0000000..70a6145
--- /dev/null
+++ b/drivers/serial/pch_uart.c
@@ -0,0 +1,1451 @@
+/*
+ *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License as published by
+ *the Free Software Foundation; version 2 of the License.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *GNU General Public License for more details.
+ *
+ *You should have received a copy of the GNU General Public License
+ *along with this program; if not, write to the Free Software
+ *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial_core.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/dmaengine.h>
+#include <linux/pch_dma.h>
+
+enum {
+ PCH_UART_HANDLED_RX_INT_SHIFT,
+ PCH_UART_HANDLED_TX_INT_SHIFT,
+ PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
+ PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
+ PCH_UART_HANDLED_MS_INT_SHIFT,
+};
+
+enum {
+ PCH_UART_8LINE,
+ PCH_UART_2LINE,
+};
+
+#define PCH_UART_DRIVER_DEVICE "ttyPCH"
+
+#define PCH_UART_NR_GE_256FIFO 1
+#define PCH_UART_NR_GE_64FIFO 3
+#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
+#define PCH_UART_NR PCH_UART_NR_GE
+
+#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
+ PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
+ PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
+
+#define PCH_UART_RBR 0x00
+#define PCH_UART_THR 0x00
+
+#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
+ PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
+#define PCH_UART_IER_ERBFI 0x00000001
+#define PCH_UART_IER_ETBEI 0x00000002
+#define PCH_UART_IER_ELSI 0x00000004
+#define PCH_UART_IER_EDSSI 0x00000008
+
+#define PCH_UART_IIR_IP 0x00000001
+#define PCH_UART_IIR_IID 0x00000006
+#define PCH_UART_IIR_MSI 0x00000000
+#define PCH_UART_IIR_TRI 0x00000002
+#define PCH_UART_IIR_RRI 0x00000004
+#define PCH_UART_IIR_REI 0x00000006
+#define PCH_UART_IIR_TOI 0x00000008
+#define PCH_UART_IIR_FIFO256 0x00000020
+#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
+#define PCH_UART_IIR_FE 0x000000C0
+
+#define PCH_UART_FCR_FIFOE 0x00000001
+#define PCH_UART_FCR_RFR 0x00000002
+#define PCH_UART_FCR_TFR 0x00000004
+#define PCH_UART_FCR_DMS 0x00000008
+#define PCH_UART_FCR_FIFO256 0x00000020
+#define PCH_UART_FCR_RFTL 0x000000C0
+
+#define PCH_UART_FCR_RFTL1 0x00000000
+#define PCH_UART_FCR_RFTL64 0x00000040
+#define PCH_UART_FCR_RFTL128 0x00000080
+#define PCH_UART_FCR_RFTL224 0x000000C0
+#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
+#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
+#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
+#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
+#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
+#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
+#define PCH_UART_FCR_RFTL_SHIFT 6
+
+#define PCH_UART_LCR_WLS 0x00000003
+#define PCH_UART_LCR_STB 0x00000004
+#define PCH_UART_LCR_PEN 0x00000008
+#define PCH_UART_LCR_EPS 0x00000010
+#define PCH_UART_LCR_SP 0x00000020
+#define PCH_UART_LCR_SB 0x00000040
+#define PCH_UART_LCR_DLAB 0x00000080
+#define PCH_UART_LCR_NP 0x00000000
+#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
+#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
+#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
+#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
+ PCH_UART_LCR_SP)
+
+#define PCH_UART_LCR_5BIT 0x00000000
+#define PCH_UART_LCR_6BIT 0x00000001
+#define PCH_UART_LCR_7BIT 0x00000002
+#define PCH_UART_LCR_8BIT 0x00000003
+
+#define PCH_UART_MCR_DTR 0x00000001
+#define PCH_UART_MCR_RTS 0x00000002
+#define PCH_UART_MCR_OUT 0x0000000C
+#define PCH_UART_MCR_LOOP 0x00000010
+#define PCH_UART_MCR_AFE 0x00000020
+
+#define PCH_UART_LSR_DR 0x00000001
+#define PCH_UART_LSR_ERR (1<<7)
+
+#define PCH_UART_MSR_DCTS 0x00000001
+#define PCH_UART_MSR_DDSR 0x00000002
+#define PCH_UART_MSR_TERI 0x00000004
+#define PCH_UART_MSR_DDCD 0x00000008
+#define PCH_UART_MSR_CTS 0x00000010
+#define PCH_UART_MSR_DSR 0x00000020
+#define PCH_UART_MSR_RI 0x00000040
+#define PCH_UART_MSR_DCD 0x00000080
+#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
+ PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
+
+#define PCH_UART_DLL 0x00
+#define PCH_UART_DLM 0x01
+
+#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b))
+
+#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
+#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
+#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
+#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
+#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
+
+#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
+#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
+#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
+#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
+#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
+#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
+#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
+#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
+#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
+#define PCH_UART_HAL_STB1 0
+#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
+
+#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
+#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
+#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
+ PCH_UART_HAL_CLR_RX_FIFO)
+
+#define PCH_UART_HAL_DMA_MODE0 0
+#define PCH_UART_HAL_FIFO_DIS 0
+#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
+#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
+ PCH_UART_FCR_FIFO256)
+#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
+#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
+#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
+#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
+#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
+#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
+#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
+#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
+#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
+#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
+#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
+#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
+#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
+#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
+
+#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
+#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
+#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
+#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
+#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
+
+#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
+#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
+#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
+#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
+#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
+
+struct pch_uart_buffer {
+ unsigned char *buf;
+ int size;
+};
+
+struct eg20t_port {
+ struct uart_port port;
+ int port_type;
+ void __iomem *membase;
+ resource_size_t mapbase;
+ unsigned int iobase;
+ struct pci_dev *pdev;
+ int fifo_size;
+ int base_baud;
+ int start_tx;
+ int start_rx;
+ int tx_empty;
+ int int_dis_flag;
+ int trigger;
+ int trigger_level;
+ struct pch_uart_buffer rxbuf;
+ unsigned int dmsr;
+ unsigned int fcr;
+ unsigned int use_dma;
+ unsigned int use_dma_flag;
+ struct dma_async_tx_descriptor *desc_tx;
+ struct dma_async_tx_descriptor *desc_rx;
+ struct pch_dma_slave param_tx;
+ struct pch_dma_slave param_rx;
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct scatterlist sg_tx;
+ struct scatterlist sg_rx;
+ int tx_dma_use;
+ void *rx_buf_virt;
+ dma_addr_t rx_buf_dma;
+};
+
+static unsigned int default_baud = 9600;
+static const int trigger_level_256[4] = { 1, 64, 128, 224 };
+static const int trigger_level_64[4] = { 1, 16, 32, 56 };
+static const int trigger_level_16[4] = { 1, 4, 8, 14 };
+static const int trigger_level_1[4] = { 1, 1, 1, 1 };
+
+static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize,
+ int base_baud)
+{
+ struct eg20t_port *priv = pci_get_drvdata(pdev);
+
+ priv->trigger_level = 1;
+ priv->fcr = 0;
+}
+
+static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base)
+{
+ unsigned int msr = ioread8(base + UART_MSR);
+ priv->dmsr |= msr & PCH_UART_MSR_DELTA;
+
+ return msr;
+}
+
+static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
+ unsigned int flag)
+{
+ u8 ier = ioread8(priv->membase + UART_IER);
+ ier |= flag & PCH_UART_IER_MASK;
+ iowrite8(ier, priv->membase + UART_IER);
+}
+
+static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
+ unsigned int flag)
+{
+ u8 ier = ioread8(priv->membase + UART_IER);
+ ier &= ~(flag & PCH_UART_IER_MASK);
+ iowrite8(ier, priv->membase + UART_IER);
+}
+
+static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
+ unsigned int parity, unsigned int bits,
+ unsigned int stb)
+{
+ unsigned int dll, dlm, lcr;
+ int div;
+
+ div = DIV_ROUND(priv->base_baud / 16, baud);
+ if (div < 0 || USHRT_MAX <= div) {
+ pr_err("Invalid Baud(div=0x%x)\n", div);
+ return -EINVAL;
+ }
+
+ dll = (unsigned int)div & 0x00FFU;
+ dlm = ((unsigned int)div >> 8) & 0x00FFU;
+
+ if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
+ pr_err("Invalid parity(0x%x)\n", parity);
+ return -EINVAL;
+ }
+
+ if (bits & ~PCH_UART_LCR_WLS) {
+ pr_err("Invalid bits(0x%x)\n", bits);
+ return -EINVAL;
+ }
+
+ if (stb & ~PCH_UART_LCR_STB) {
+ pr_err("Invalid STB(0x%x)\n", stb);
+ return -EINVAL;
+ }
+
+ lcr = parity;
+ lcr |= bits;
+ lcr |= stb;
+
+ pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+ __func__, baud, div, lcr, jiffies);
+ iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
+ iowrite8(dll, priv->membase + PCH_UART_DLL);
+ iowrite8(dlm, priv->membase + PCH_UART_DLM);
+ iowrite8(lcr, priv->membase + UART_LCR);
+
+ return 0;
+}
+
+static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
+ unsigned int flag)
+{
+ if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
+ pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+ return -EINVAL;
+ }
+
+ iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
+ iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
+ priv->membase + UART_FCR);
+ iowrite8(priv->fcr, priv->membase + UART_FCR);
+
+ return 0;
+}
+
+static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
+ unsigned int dmamode,
+ unsigned int fifo_size, unsigned int trigger)
+{
+ u8 fcr;
+
+ if (dmamode & ~PCH_UART_FCR_DMS) {
+ pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+ return -EINVAL;
+ }
+
+ if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
+ pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+ return -EINVAL;
+ }
+
+ if (trigger & ~PCH_UART_FCR_RFTL) {
+ pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+ return -EINVAL;
+ }
+
+ switch (priv->fifo_size) {
+ case 256:
+ priv->trigger_level =
+ trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+ break;
+ case 64:
+ priv->trigger_level =
+ trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+ break;
+ case 16:
+ priv->trigger_level =
+ trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+ break;
+ default:
+ priv->trigger_level =
+ trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+ break;
+ }
+ fcr =
+ dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
+ iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
+ iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
+ priv->membase + UART_FCR);
+ iowrite8(fcr, priv->membase + UART_FCR);
+ priv->fcr = fcr;
+
+ return 0;
+}
+
+static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
+{
+ priv->dmsr = 0;
+ return get_msr(priv, priv->membase);
+}
+
+static int pch_uart_hal_write(struct eg20t_port *priv,
+ const unsigned char *buf, int tx_size)
+{
+ int i;
+ unsigned int thr;
+
+ for (i = 0; i < tx_size;) {
+ thr = buf[i++];
+ iowrite8(thr, priv->membase + PCH_UART_THR);
+ }
+ return i;
+}
+
+static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
+ int rx_size)
+{
+ int i;
+ u8 rbr, lsr;
+
+ lsr = ioread8(priv->membase + UART_LSR);
+ for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
+ i < rx_size && lsr & UART_LSR_DR;
+ lsr = ioread8(priv->membase + UART_LSR)) {
+ rbr = ioread8(priv->membase + PCH_UART_RBR);
+ buf[i++] = rbr;
+ }
+ return i;
+}
+
+static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
+{
+ unsigned int iir;
+ int ret;
+
+ iir = ioread8(priv->membase + UART_IIR);
+ ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
+ return ret;
+}
+
+static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
+{
+ return ioread8(priv->membase + UART_LSR);
+}
+
+static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
+{
+ unsigned int lcr;
+
+ lcr = ioread8(priv->membase + UART_LCR);
+ if (on)
+ lcr |= PCH_UART_LCR_SB;
+ else
+ lcr &= ~PCH_UART_LCR_SB;
+
+ iowrite8(lcr, priv->membase + UART_LCR);
+}
+
+static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
+ int size)
+{
+ struct uart_port *port;
+ struct tty_struct *tty;
+
+ port = &priv->port;
+ tty = tty_port_tty_get(&port->state->port);
+ if (!tty) {
+ pr_debug("%s:tty is busy now", __func__);
+ return -EBUSY;
+ }
+
+ tty_insert_flip_string(tty, buf, size);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+
+ return 0;
+}
+
+static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
+{
+ int ret;
+ struct uart_port *port = &priv->port;
+
+ if (port->x_char) {
+ pr_debug("%s:X character send %02x (%lu)\n", __func__,
+ port->x_char, jiffies);
+ buf[0] = port->x_char;
+ port->x_char = 0;
+ ret = 1;
+ } else {
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int dma_push_rx(struct eg20t_port *priv, int size)
+{
+ struct tty_struct *tty;
+ int room;
+ struct uart_port *port = &priv->port;
+
+ port = &priv->port;
+ tty = tty_port_tty_get(&port->state->port);
+ if (!tty) {
+ pr_debug("%s:tty is busy now", __func__);
+ return 0;
+ }
+
+ room = tty_buffer_request_room(tty, size);
+
+ if (room < size)
+ dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+ size - room);
+ if (!room)
+ return room;
+
+ tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size);
+
+ port->icount.rx += room;
+ tty_kref_put(tty);
+
+ return room;
+}
+
+static void pch_free_dma(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ priv = container_of(port, struct eg20t_port, port);
+
+ if (priv->chan_tx) {
+ dma_release_channel(priv->chan_tx);
+ priv->chan_tx = NULL;
+ }
+ if (priv->chan_rx) {
+ dma_release_channel(priv->chan_rx);
+ priv->chan_rx = NULL;
+ }
+ if (sg_dma_address(&priv->sg_rx))
+ dma_free_coherent(port->dev, port->fifosize,
+ sg_virt(&priv->sg_rx),
+ sg_dma_address(&priv->sg_rx));
+
+ return;
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ struct pch_dma_slave *param = slave;
+
+ if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
+ chan->device->dev)) {
+ chan->private = param;
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void pch_request_dma(struct uart_port *port)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct pci_dev *dma_dev;
+ struct pch_dma_slave *param;
+ struct eg20t_port *priv =
+ container_of(port, struct eg20t_port, port);
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+ information */
+ /* Set Tx DMA */
+ param = &priv->param_tx;
+ param->dma_dev = &dma_dev->dev;
+ param->chan_id = priv->port.line;
+ param->tx_reg = port->mapbase + UART_TX;
+ chan = dma_request_channel(mask, filter, param);
+ if (!chan) {
+ pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+ return;
+ }
+ priv->chan_tx = chan;
+
+ /* Set Rx DMA */
+ param = &priv->param_rx;
+ param->dma_dev = &dma_dev->dev;
+ param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+ param->rx_reg = port->mapbase + UART_RX;
+ chan = dma_request_channel(mask, filter, param);
+ if (!chan) {
+ pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+ dma_release_channel(priv->chan_tx);
+ return;
+ }
+
+ /* Get Consistent memory for DMA */
+ priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
+ &priv->rx_buf_dma, GFP_KERNEL);
+ priv->chan_rx = chan;
+}
+
+static void pch_dma_rx_complete(void *arg)
+{
+ struct eg20t_port *priv = arg;
+ struct uart_port *port = &priv->port;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+ if (!tty) {
+ pr_debug("%s:tty is busy now", __func__);
+ return;
+ }
+
+ if (dma_push_rx(priv, priv->trigger_level))
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+}
+
+static void pch_dma_tx_complete(void *arg)
+{
+ struct eg20t_port *priv = arg;
+ struct uart_port *port = &priv->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ xmit->tail += sg_dma_len(&priv->sg_tx);
+ xmit->tail &= UART_XMIT_SIZE - 1;
+ port->icount.tx += sg_dma_len(&priv->sg_tx);
+
+ async_tx_ack(priv->desc_tx);
+ priv->tx_dma_use = 0;
+}
+
+static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+{
+ int count = 0;
+ struct uart_port *port = &priv->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
+ goto pop_tx_end;
+
+ do {
+ int cnt_to_end =
+ CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ int sz = min(size - count, cnt_to_end);
+ memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+ xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
+ count += sz;
+ } while (!uart_circ_empty(xmit) && count < size);
+
+pop_tx_end:
+ pr_debug("%d characters. Remained %d characters. (%lu)\n",
+ count, size - count, jiffies);
+
+ return count;
+}
+
+static int handle_rx_to(struct eg20t_port *priv)
+{
+ struct pch_uart_buffer *buf;
+ int rx_size;
+ int ret;
+ if (!priv->start_rx) {
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ return 0;
+ }
+ buf = &priv->rxbuf;
+ do {
+ rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
+ ret = push_rx(priv, buf->buf, rx_size);
+ if (ret)
+ return 0;
+ } while (rx_size == buf->size);
+
+ return PCH_UART_HANDLED_RX_INT;
+}
+
+static int handle_rx(struct eg20t_port *priv)
+{
+ return handle_rx_to(priv);
+}
+
+static int dma_handle_rx(struct eg20t_port *priv)
+{
+ struct uart_port *port = &priv->port;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sg;
+
+ priv = container_of(port, struct eg20t_port, port);
+ sg = &priv->sg_rx;
+
+ sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
+
+ sg_dma_len(sg) = priv->fifo_size;
+
+ sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
+ sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
+ ~PAGE_MASK);
+
+ sg_dma_address(sg) = priv->rx_buf_dma;
+
+ desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
+ sg, 1, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT);
+ if (!desc)
+ return 0;
+
+ priv->desc_rx = desc;
+ desc->callback = pch_dma_rx_complete;
+ desc->callback_param = priv;
+ desc->tx_submit(desc);
+ dma_async_issue_pending(priv->chan_rx);
+
+ return PCH_UART_HANDLED_RX_INT;
+}
+
+static unsigned int handle_tx(struct eg20t_port *priv)
+{
+ struct uart_port *port = &priv->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ int ret;
+ int fifo_size;
+ int tx_size;
+ int size;
+ int tx_empty;
+
+ if (!priv->start_tx) {
+ pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ priv->tx_empty = 1;
+ return 0;
+ }
+
+ fifo_size = max(priv->fifo_size, 1);
+ tx_empty = 1;
+ if (pop_tx_x(priv, xmit->buf)) {
+ pch_uart_hal_write(priv, xmit->buf, 1);
+ port->icount.tx++;
+ tx_empty = 0;
+ fifo_size--;
+ }
+ size = min(xmit->head - xmit->tail, fifo_size);
+ tx_size = pop_tx(priv, xmit->buf, size);
+ if (tx_size > 0) {
+ ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
+ port->icount.tx += ret;
+ tx_empty = 0;
+ }
+
+ priv->tx_empty = tx_empty;
+
+ if (tx_empty)
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+
+ return PCH_UART_HANDLED_TX_INT;
+}
+
+static unsigned int dma_handle_tx(struct eg20t_port *priv)
+{
+ struct uart_port *port = &priv->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct scatterlist *sg = &priv->sg_tx;
+ int nent;
+ int fifo_size;
+ int tx_empty;
+ struct dma_async_tx_descriptor *desc;
+
+ if (!priv->start_tx) {
+ pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+ priv->tx_empty = 1;
+ return 0;
+ }
+
+ fifo_size = max(priv->fifo_size, 1);
+ tx_empty = 1;
+ if (pop_tx_x(priv, xmit->buf)) {
+ pch_uart_hal_write(priv, xmit->buf, 1);
+ port->icount.tx++;
+ tx_empty = 0;
+ fifo_size--;
+ }
+
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+
+ priv->tx_dma_use = 1;
+
+ sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+
+ sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
+ UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+
+ nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+ if (!nent) {
+ pr_err("%s:dma_map_sg Failed\n", __func__);
+ return 0;
+ }
+
+ sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+ sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+ sg->offset;
+ sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
+ UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+ xmit->tail, UART_XMIT_SIZE));
+
+ desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
+ sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+ return 0;
+ }
+
+ dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+ priv->desc_tx = desc;
+ desc->callback = pch_dma_tx_complete;
+ desc->callback_param = priv;
+
+ desc->tx_submit(desc);
+
+ dma_async_issue_pending(priv->chan_tx);
+
+ return PCH_UART_HANDLED_TX_INT;
+}
+
+static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
+{
+ u8 fcr = ioread8(priv->membase + UART_FCR);
+
+ /* Reset FIFO */
+ fcr |= UART_FCR_CLEAR_RCVR;
+ iowrite8(fcr, priv->membase + UART_FCR);
+
+ if (lsr & PCH_UART_LSR_ERR)
+ dev_err(&priv->pdev->dev, "Error data in FIFO\n");
+
+ if (lsr & UART_LSR_FE)
+ dev_err(&priv->pdev->dev, "Framing Error\n");
+
+ if (lsr & UART_LSR_PE)
+ dev_err(&priv->pdev->dev, "Parity Error\n");
+
+ if (lsr & UART_LSR_OE)
+ dev_err(&priv->pdev->dev, "Overrun Error\n");
+}
+
+static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
+{
+ struct eg20t_port *priv = dev_id;
+ unsigned int handled;
+ u8 lsr;
+ int ret = 0;
+ unsigned int iid;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->port.lock, flags);
+ handled = 0;
+ while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
+ switch (iid) {
+ case PCH_UART_IID_RLS: /* Receiver Line Status */
+ lsr = pch_uart_hal_get_line_status(priv);
+ if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
+ UART_LSR_PE | UART_LSR_OE)) {
+ pch_uart_err_ir(priv, lsr);
+ ret = PCH_UART_HANDLED_RX_ERR_INT;
+ }
+ break;
+ case PCH_UART_IID_RDR: /* Received Data Ready */
+ if (priv->use_dma)
+ ret = dma_handle_rx(priv);
+ else
+ ret = handle_rx(priv);
+ break;
+ case PCH_UART_IID_RDR_TO: /* Received Data Ready
+ (FIFO Timeout) */
+ ret = handle_rx_to(priv);
+ break;
+ case PCH_UART_IID_THRE: /* Transmitter Holding Register
+ Empty */
+ if (priv->use_dma)
+ ret = dma_handle_tx(priv);
+ else
+ ret = handle_tx(priv);
+ break;
+ case PCH_UART_IID_MS: /* Modem Status */
+ ret = PCH_UART_HANDLED_MS_INT;
+ break;
+ default: /* Never junp to this label */
+ pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+ ret = -1;
+ break;
+ }
+ handled |= (unsigned int)ret;
+ }
+ if (handled == 0 && iid <= 1) {
+ if (priv->int_dis_flag)
+ priv->int_dis_flag = 0;
+ }
+
+ spin_unlock_irqrestore(&priv->port.lock, flags);
+ return IRQ_RETVAL(handled);
+}
+
+/* This function tests whether the transmitter fifo and shifter for the port
+ described by 'port' is empty. */
+static unsigned int pch_uart_tx_empty(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ int ret;
+ priv = container_of(port, struct eg20t_port, port);
+ if (priv->tx_empty)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* Returns the current state of modem control inputs. */
+static unsigned int pch_uart_get_mctrl(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ u8 modem;
+ unsigned int ret = 0;
+
+ priv = container_of(port, struct eg20t_port, port);
+ modem = pch_uart_hal_get_modem(priv);
+
+ if (modem & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+
+ if (modem & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+
+ if (modem & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+
+ if (modem & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ u32 mcr = 0;
+ unsigned int dat;
+ struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ if (mctrl) {
+ dat = pch_uart_get_mctrl(port);
+ dat |= mcr;
+ iowrite8(dat, priv->membase + UART_MCR);
+ }
+}
+
+static void pch_uart_stop_tx(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ priv = container_of(port, struct eg20t_port, port);
+ priv->start_tx = 0;
+ priv->tx_dma_use = 0;
+}
+
+static void pch_uart_start_tx(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+
+ priv = container_of(port, struct eg20t_port, port);
+
+ if (priv->use_dma)
+ if (priv->tx_dma_use)
+ return;
+
+ priv->start_tx = 1;
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
+}
+
+static void pch_uart_stop_rx(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ priv = container_of(port, struct eg20t_port, port);
+ priv->start_rx = 0;
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ priv->int_dis_flag = 1;
+}
+
+/* Enable the modem status interrupts. */
+static void pch_uart_enable_ms(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ priv = container_of(port, struct eg20t_port, port);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
+}
+
+/* Control the transmission of a break signal. */
+static void pch_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ struct eg20t_port *priv;
+ unsigned long flags;
+
+ priv = container_of(port, struct eg20t_port, port);
+ spin_lock_irqsave(&port->lock, flags);
+ pch_uart_hal_set_break(priv, ctl);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Grab any interrupt resources and initialise any low level driver state. */
+static int pch_uart_startup(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ int ret;
+ int fifo_size;
+ int trigger_level;
+
+ priv = container_of(port, struct eg20t_port, port);
+ priv->tx_empty = 1;
+ port->uartclk = priv->base_baud;
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+ ret = pch_uart_hal_set_line(priv, default_baud,
+ PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
+ PCH_UART_HAL_STB1);
+ if (ret)
+ return ret;
+
+ switch (priv->fifo_size) {
+ case 256:
+ fifo_size = PCH_UART_HAL_FIFO256;
+ break;
+ case 64:
+ fifo_size = PCH_UART_HAL_FIFO64;
+ break;
+ case 16:
+ fifo_size = PCH_UART_HAL_FIFO16;
+ case 1:
+ default:
+ fifo_size = PCH_UART_HAL_FIFO_DIS;
+ break;
+ }
+
+ switch (priv->trigger) {
+ case PCH_UART_HAL_TRIGGER1:
+ trigger_level = 1;
+ break;
+ case PCH_UART_HAL_TRIGGER_L:
+ trigger_level = priv->fifo_size / 4;
+ break;
+ case PCH_UART_HAL_TRIGGER_M:
+ trigger_level = priv->fifo_size / 2;
+ break;
+ case PCH_UART_HAL_TRIGGER_H:
+ default:
+ trigger_level = priv->fifo_size - (priv->fifo_size / 8);
+ break;
+ }
+
+ priv->trigger_level = trigger_level;
+ ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
+ fifo_size, priv->trigger);
+ if (ret < 0)
+ return ret;
+
+ ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
+ KBUILD_MODNAME, priv);
+ if (ret < 0)
+ return ret;
+
+ if (priv->use_dma)
+ pch_request_dma(port);
+
+ priv->start_rx = 1;
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ uart_update_timeout(port, CS8, default_baud);
+
+ return 0;
+}
+
+static void pch_uart_shutdown(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ int ret;
+
+ priv = container_of(port, struct eg20t_port, port);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+ pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
+ ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
+ PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
+ if (ret)
+ pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+
+ if (priv->use_dma_flag)
+ pch_free_dma(port);
+
+ free_irq(priv->port.irq, priv);
+}
+
+/* Change the port parameters, including word length, parity, stop
+ *bits. Update read_status_mask and ignore_status_mask to indicate
+ *the types of events we are interested in receiving. */
+static void pch_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ int baud;
+ int rtn;
+ unsigned int parity, bits, stb;
+ struct eg20t_port *priv;
+ unsigned long flags;
+
+ priv = container_of(port, struct eg20t_port, port);
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ bits = PCH_UART_HAL_5BIT;
+ break;
+ case CS6:
+ bits = PCH_UART_HAL_6BIT;
+ break;
+ case CS7:
+ bits = PCH_UART_HAL_7BIT;
+ break;
+ default: /* CS8 */
+ bits = PCH_UART_HAL_8BIT;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ stb = PCH_UART_HAL_STB2;
+ else
+ stb = PCH_UART_HAL_STB1;
+
+ if (termios->c_cflag & PARENB) {
+ if (!(termios->c_cflag & PARODD))
+ parity = PCH_UART_HAL_PARITY_ODD;
+ else
+ parity = PCH_UART_HAL_PARITY_EVEN;
+
+ } else {
+ parity = PCH_UART_HAL_PARITY_NONE;
+ }
+ termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+ rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
+ if (rtn)
+ goto out;
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+out:
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pch_uart_type(struct uart_port *port)
+{
+ return KBUILD_MODNAME;
+}
+
+static void pch_uart_release_port(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+
+ priv = container_of(port, struct eg20t_port, port);
+ pci_iounmap(priv->pdev, priv->membase);
+ pci_release_regions(priv->pdev);
+}
+
+static int pch_uart_request_port(struct uart_port *port)
+{
+ struct eg20t_port *priv;
+ int ret;
+ void __iomem *membase;
+
+ priv = container_of(port, struct eg20t_port, port);
+ ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
+ if (ret < 0)
+ return -EBUSY;
+
+ membase = pci_iomap(priv->pdev, 1, 0);
+ if (!membase) {
+ pci_release_regions(priv->pdev);
+ return -EBUSY;
+ }
+ priv->membase = port->membase = membase;
+
+ return 0;
+}
+
+static void pch_uart_config_port(struct uart_port *port, int type)
+{
+ struct eg20t_port *priv;
+
+ priv = container_of(port, struct eg20t_port, port);
+ if (type & UART_CONFIG_TYPE) {
+ port->type = priv->port_type;
+ pch_uart_request_port(port);
+ }
+}
+
+static int pch_uart_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ struct eg20t_port *priv;
+
+ priv = container_of(port, struct eg20t_port, port);
+ if (serinfo->flags & UPF_LOW_LATENCY) {
+ pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+ priv->use_dma = 0;
+ serinfo->flags &= ~UPF_LOW_LATENCY;
+ } else {
+#ifndef CONFIG_PCH_DMA
+ pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+ return -EOPNOTSUPP;
+#endif
+ priv->use_dma = 1;
+ priv->use_dma_flag = 1;
+ pr_info("PCH UART : Use DMA Mode\n");
+ }
+
+ return 0;
+}
+
+static struct uart_ops pch_uart_ops = {
+ .tx_empty = pch_uart_tx_empty,
+ .set_mctrl = pch_uart_set_mctrl,
+ .get_mctrl = pch_uart_get_mctrl,
+ .stop_tx = pch_uart_stop_tx,
+ .start_tx = pch_uart_start_tx,
+ .stop_rx = pch_uart_stop_rx,
+ .enable_ms = pch_uart_enable_ms,
+ .break_ctl = pch_uart_break_ctl,
+ .startup = pch_uart_startup,
+ .shutdown = pch_uart_shutdown,
+ .set_termios = pch_uart_set_termios,
+/* .pm = pch_uart_pm, Not supported yet */
+/* .set_wake = pch_uart_set_wake, Not supported yet */
+ .type = pch_uart_type,
+ .release_port = pch_uart_release_port,
+ .request_port = pch_uart_request_port,
+ .config_port = pch_uart_config_port,
+ .verify_port = pch_uart_verify_port
+};
+
+static struct uart_driver pch_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = KBUILD_MODNAME,
+ .dev_name = PCH_UART_DRIVER_DEVICE,
+ .major = 0,
+ .minor = 0,
+ .nr = PCH_UART_NR,
+};
+
+static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
+ int port_type)
+{
+ struct eg20t_port *priv;
+ int ret;
+ unsigned int iobase;
+ unsigned int mapbase;
+ unsigned char *rxbuf;
+ int fifosize, base_baud;
+ static int num;
+
+ priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
+ if (priv == NULL)
+ goto init_port_alloc_err;
+
+ rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!rxbuf)
+ goto init_port_free_txbuf;
+
+ switch (port_type) {
+ case PORT_UNKNOWN:
+ fifosize = 256; /* UART0 */
+ base_baud = 1843200; /* 1.8432MHz */
+ break;
+ case PORT_8250:
+ fifosize = 64; /* UART1~3 */
+ base_baud = 1843200; /* 1.8432MHz */
+ break;
+ default:
+ dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
+ goto init_port_hal_free;
+ }
+
+ iobase = pci_resource_start(pdev, 0);
+ mapbase = pci_resource_start(pdev, 1);
+ priv->mapbase = mapbase;
+ priv->iobase = iobase;
+ priv->pdev = pdev;
+ priv->tx_empty = 1;
+ priv->rxbuf.buf = rxbuf;
+ priv->rxbuf.size = PAGE_SIZE;
+
+ priv->fifo_size = fifosize;
+ priv->base_baud = base_baud;
+ priv->port_type = PORT_MAX_8250 + port_type + 1;
+ priv->port.dev = &pdev->dev;
+ priv->port.iobase = iobase;
+ priv->port.membase = NULL;
+ priv->port.mapbase = mapbase;
+ priv->port.irq = pdev->irq;
+ priv->port.iotype = UPIO_PORT;
+ priv->port.ops = &pch_uart_ops;
+ priv->port.flags = UPF_BOOT_AUTOCONF;
+ priv->port.fifosize = fifosize;
+ priv->port.line = num++;
+ priv->trigger = PCH_UART_HAL_TRIGGER_M;
+
+ pci_set_drvdata(pdev, priv);
+ pch_uart_hal_request(pdev, fifosize, base_baud);
+ ret = uart_add_one_port(&pch_uart_driver, &priv->port);
+ if (ret < 0)
+ goto init_port_hal_free;
+
+ return priv;
+
+init_port_hal_free:
+ free_page((unsigned long)rxbuf);
+init_port_free_txbuf:
+ kfree(priv);
+init_port_alloc_err:
+
+ return NULL;
+}
+
+static void pch_uart_exit_port(struct eg20t_port *priv)
+{
+ uart_remove_one_port(&pch_uart_driver, &priv->port);
+ pci_set_drvdata(priv->pdev, NULL);
+ free_page((unsigned long)priv->rxbuf.buf);
+}
+
+static void pch_uart_pci_remove(struct pci_dev *pdev)
+{
+ struct eg20t_port *priv;
+
+ priv = (struct eg20t_port *)pci_get_drvdata(pdev);
+ pch_uart_exit_port(priv);
+ pci_disable_device(pdev);
+ kfree(priv);
+ return;
+}
+#ifdef CONFIG_PM
+static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct eg20t_port *priv = pci_get_drvdata(pdev);
+
+ uart_suspend_port(&pch_uart_driver, &priv->port);
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int pch_uart_pci_resume(struct pci_dev *pdev)
+{
+ struct eg20t_port *priv = pci_get_drvdata(pdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
+ return ret;
+ }
+
+ uart_resume_port(&pch_uart_driver, &priv->port);
+
+ return 0;
+}
+#else
+#define pch_uart_pci_suspend NULL
+#define pch_uart_pci_resume NULL
+#endif
+
+static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
+ .driver_data = PCH_UART_8LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
+ .driver_data = PCH_UART_2LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
+ .driver_data = PCH_UART_2LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
+ .driver_data = PCH_UART_2LINE},
+ {0,},
+};
+
+static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int ret;
+ struct eg20t_port *priv;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto probe_error;
+
+ priv = pch_uart_init_port(pdev, id->driver_data);
+ if (!priv) {
+ ret = -EBUSY;
+ goto probe_disable_device;
+ }
+ pci_set_drvdata(pdev, priv);
+
+ return ret;
+
+probe_disable_device:
+ pci_disable_device(pdev);
+probe_error:
+ return ret;
+}
+
+static struct pci_driver pch_uart_pci_driver = {
+ .name = "pch_uart",
+ .id_table = pch_uart_pci_id,
+ .probe = pch_uart_pci_probe,
+ .remove = __devexit_p(pch_uart_pci_remove),
+ .suspend = pch_uart_pci_suspend,
+ .resume = pch_uart_pci_resume,
+};
+
+static int __init pch_uart_module_init(void)
+{
+ int ret;
+
+ /* register as UART driver */
+ ret = uart_register_driver(&pch_uart_driver);
+ if (ret < 0)
+ return ret;
+
+ /* register as PCI driver */
+ ret = pci_register_driver(&pch_uart_pci_driver);
+ if (ret < 0)
+ uart_unregister_driver(&pch_uart_driver);
+
+ return ret;
+}
+module_init(pch_uart_module_init);
+
+static void __exit pch_uart_module_exit(void)
+{
+ pci_unregister_driver(&pch_uart_pci_driver);
+ uart_unregister_driver(&pch_uart_driver);
+}
+module_exit(pch_uart_module_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
+module_param(default_baud, uint, S_IRUGO);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9ffa5be..460a72d 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1985,7 +1985,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
- enable_irq_wake(uport->irq);
+ if (!enable_irq_wake(uport->irq))
+ uport->irq_wake = 1;
put_device(tty_dev);
mutex_unlock(&port->mutex);
return 0;
@@ -2051,7 +2052,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
- disable_irq_wake(uport->irq);
+ if (uport->irq_wake) {
+ disable_irq_wake(uport->irq);
+ uport->irq_wake = 0;
+ }
mutex_unlock(&port->mutex);
return 0;
}
@@ -2134,6 +2138,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
case UPIO_AU:
case UPIO_TSI:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
snprintf(address, sizeof(address),
"MMIO 0x%llx", (unsigned long long)port->mapbase);
break;
@@ -2554,6 +2559,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
case UPIO_AU:
case UPIO_TSI:
case UPIO_DWAPB:
+ case UPIO_DWAPB32:
return (port1->mapbase == port2->mapbase);
}
return 0;
diff --git a/drivers/serial/vt8500_serial.c b/drivers/serial/vt8500_serial.c
new file mode 100644
index 0000000..322bf56
--- /dev/null
+++ b/drivers/serial/vt8500_serial.c
@@ -0,0 +1,648 @@
+/*
+ * drivers/serial/vt8500_serial.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on msm_serial.c, which is:
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/*
+ * UART Register offsets
+ */
+
+#define VT8500_URTDR 0x0000 /* Transmit data */
+#define VT8500_URRDR 0x0004 /* Receive data */
+#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */
+#define VT8500_URLCR 0x000C /* Line control */
+#define VT8500_URICR 0x0010 /* IrDA control */
+#define VT8500_URIER 0x0014 /* Interrupt enable */
+#define VT8500_URISR 0x0018 /* Interrupt status */
+#define VT8500_URUSR 0x001c /* UART status */
+#define VT8500_URFCR 0x0020 /* FIFO control */
+#define VT8500_URFIDX 0x0024 /* FIFO index */
+#define VT8500_URBKR 0x0028 /* Break signal count */
+#define VT8500_URTOD 0x002c /* Time out divisor */
+#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */
+#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */
+
+/*
+ * Interrupt enable and status bits
+ */
+
+#define TXDE (1 << 0) /* Tx Data empty */
+#define RXDF (1 << 1) /* Rx Data full */
+#define TXFAE (1 << 2) /* Tx FIFO almost empty */
+#define TXFE (1 << 3) /* Tx FIFO empty */
+#define RXFAF (1 << 4) /* Rx FIFO almost full */
+#define RXFF (1 << 5) /* Rx FIFO full */
+#define TXUDR (1 << 6) /* Tx underrun */
+#define RXOVER (1 << 7) /* Rx overrun */
+#define PER (1 << 8) /* Parity error */
+#define FER (1 << 9) /* Frame error */
+#define TCTS (1 << 10) /* Toggle of CTS */
+#define RXTOUT (1 << 11) /* Rx timeout */
+#define BKDONE (1 << 12) /* Break signal done */
+#define ERR (1 << 13) /* AHB error response */
+
+#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
+#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR)
+
+struct vt8500_port {
+ struct uart_port uart;
+ char name[16];
+ struct clk *clk;
+ unsigned int ier;
+};
+
+static inline void vt8500_write(struct uart_port *port, unsigned int val,
+ unsigned int off)
+{
+ writel(val, port->membase + off);
+}
+
+static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off)
+{
+ return readl(port->membase + off);
+}
+
+static void vt8500_stop_tx(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port = container_of(port,
+ struct vt8500_port,
+ uart);
+
+ vt8500_port->ier &= ~TX_FIFO_INTS;
+ vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void vt8500_stop_rx(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port = container_of(port,
+ struct vt8500_port,
+ uart);
+
+ vt8500_port->ier &= ~RX_FIFO_INTS;
+ vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void vt8500_enable_ms(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port = container_of(port,
+ struct vt8500_port,
+ uart);
+
+ vt8500_port->ier |= TCTS;
+ vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+ if (!tty) {
+ /* Discard data: no tty available */
+ int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8;
+ u16 ch;
+ while (count--)
+ ch = readw(port->membase + VT8500_RXFIFO);
+ return;
+ }
+
+ /*
+ * Handle overrun
+ */
+ if ((vt8500_read(port, VT8500_URISR) & RXOVER)) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ /* and now the main RX loop */
+ while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) {
+ unsigned int c;
+ char flag = TTY_NORMAL;
+
+ c = readw(port->membase + VT8500_RXFIFO) & 0x3ff;
+
+ /* Mask conditions we're ignorning. */
+ c &= ~port->read_status_mask;
+
+ if (c & FER) {
+ port->icount.frame++;
+ flag = TTY_FRAME;
+ } else if (c & PER) {
+ port->icount.parity++;
+ flag = TTY_PARITY;
+ }
+ port->icount.rx++;
+
+ if (!uart_handle_sysrq_char(port, c))
+ tty_insert_flip_char(tty, c, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ writeb(port->x_char, port->membase + VT8500_TXFIFO);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ vt8500_stop_tx(port);
+ return;
+ }
+
+ while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
+ if (uart_circ_empty(xmit))
+ break;
+
+ writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ vt8500_stop_tx(port);
+}
+
+static void vt8500_start_tx(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port = container_of(port,
+ struct vt8500_port,
+ uart);
+
+ vt8500_port->ier &= ~TX_FIFO_INTS;
+ vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+ handle_tx(port);
+ vt8500_port->ier |= TX_FIFO_INTS;
+ vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+ port->icount.cts++;
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+}
+
+static irqreturn_t vt8500_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned long isr;
+
+ spin_lock(&port->lock);
+ isr = vt8500_read(port, VT8500_URISR);
+
+ /* Acknowledge active status bits */
+ vt8500_write(port, isr, VT8500_URISR);
+
+ if (isr & RX_FIFO_INTS)
+ handle_rx(port);
+ if (isr & TX_FIFO_INTS)
+ handle_tx(port);
+ if (isr & TCTS)
+ handle_delta_cts(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int vt8500_tx_empty(struct uart_port *port)
+{
+ return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
+ TIOCSER_TEMT : 0;
+}
+
+static unsigned int vt8500_get_mctrl(struct uart_port *port)
+{
+ unsigned int usr;
+
+ usr = vt8500_read(port, VT8500_URUSR);
+ if (usr & (1 << 4))
+ return TIOCM_CTS;
+ else
+ return 0;
+}
+
+static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void vt8500_break_ctl(struct uart_port *port, int break_ctl)
+{
+ if (break_ctl)
+ vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9),
+ VT8500_URLCR);
+}
+
+static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+ unsigned long div;
+ unsigned int loops = 1000;
+
+ div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff);
+
+ if (unlikely((baud < 900) || (baud > 921600)))
+ div |= 7;
+ else
+ div |= (921600 / baud) - 1;
+
+ while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops)
+ cpu_relax();
+ vt8500_write(port, div, VT8500_URDIV);
+
+ return baud;
+}
+
+static int vt8500_startup(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port =
+ container_of(port, struct vt8500_port, uart);
+ int ret;
+
+ snprintf(vt8500_port->name, sizeof(vt8500_port->name),
+ "vt8500_serial%d", port->line);
+
+ ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH,
+ vt8500_port->name, port);
+ if (unlikely(ret))
+ return ret;
+
+ vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */
+
+ return 0;
+}
+
+static void vt8500_shutdown(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port =
+ container_of(port, struct vt8500_port, uart);
+
+ vt8500_port->ier = 0;
+
+ /* disable interrupts and FIFOs */
+ vt8500_write(&vt8500_port->uart, 0, VT8500_URIER);
+ vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR);
+ free_irq(port->irq, port);
+}
+
+static void vt8500_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct vt8500_port *vt8500_port =
+ container_of(port, struct vt8500_port, uart);
+ unsigned long flags;
+ unsigned int baud, lcr;
+ unsigned int loops = 1000;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* calculate and set baud rate */
+ baud = uart_get_baud_rate(port, termios, old, 900, 921600);
+ baud = vt8500_set_baud_rate(port, baud);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ /* calculate parity */
+ lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
+ lcr &= ~((1 << 5) | (1 << 4));
+ if (termios->c_cflag & PARENB) {
+ lcr |= (1 << 4);
+ termios->c_cflag &= ~CMSPAR;
+ if (termios->c_cflag & PARODD)
+ lcr |= (1 << 5);
+ }
+
+ /* calculate bits per char */
+ lcr &= ~(1 << 2);
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ break;
+ case CS8:
+ default:
+ lcr |= (1 << 2);
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ break;
+ }
+
+ /* calculate stop bits */
+ lcr &= ~(1 << 3);
+ if (termios->c_cflag & CSTOPB)
+ lcr |= (1 << 3);
+
+ /* set parity, bits per char, and stop bit */
+ vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR);
+
+ /* Configure status bits to ignore based on termio flags. */
+ port->read_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->read_status_mask = FER | PER;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* Reset FIFOs */
+ vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR);
+ while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc)
+ && --loops)
+ cpu_relax();
+
+ /* Every possible FIFO-related interrupt */
+ vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS;
+
+ /*
+ * CTS flow control
+ */
+ if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag))
+ vt8500_port->ier |= TCTS;
+
+ vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR);
+ vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *vt8500_type(struct uart_port *port)
+{
+ struct vt8500_port *vt8500_port =
+ container_of(port, struct vt8500_port, uart);
+ return vt8500_port->name;
+}
+
+static void vt8500_release_port(struct uart_port *port)
+{
+}
+
+static int vt8500_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void vt8500_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_VT8500;
+}
+
+static int vt8500_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500))
+ return -EINVAL;
+ if (unlikely(port->irq != ser->irq))
+ return -EINVAL;
+ return 0;
+}
+
+static struct vt8500_port *vt8500_uart_ports[4];
+static struct uart_driver vt8500_uart_driver;
+
+#ifdef CONFIG_SERIAL_VT8500_CONSOLE
+
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = vt8500_read(port, VT8500_URFIDX);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (status & 0x10);
+}
+
+static void vt8500_console_putchar(struct uart_port *port, int c)
+{
+ wait_for_xmitr(port);
+ writeb(c, port->membase + VT8500_TXFIFO);
+}
+
+static void vt8500_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index];
+ unsigned long ier;
+
+ BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr);
+
+ ier = vt8500_read(&vt8500_port->uart, VT8500_URIER);
+ vt8500_write(&vt8500_port->uart, VT8500_URIER, 0);
+
+ uart_console_write(&vt8500_port->uart, s, count,
+ vt8500_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and switch back to FIFO
+ */
+ wait_for_xmitr(&vt8500_port->uart);
+ vt8500_write(&vt8500_port->uart, VT8500_URIER, ier);
+}
+
+static int __init vt8500_console_setup(struct console *co, char *options)
+{
+ struct vt8500_port *vt8500_port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0))
+ return -ENXIO;
+
+ vt8500_port = vt8500_uart_ports[co->index];
+
+ if (!vt8500_port)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&vt8500_port->uart,
+ co, baud, parity, bits, flow);
+}
+
+static struct console vt8500_console = {
+ .name = "ttyWMT",
+ .write = vt8500_console_write,
+ .device = uart_console_device,
+ .setup = vt8500_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &vt8500_uart_driver,
+};
+
+#define VT8500_CONSOLE (&vt8500_console)
+
+#else
+#define VT8500_CONSOLE NULL
+#endif
+
+static struct uart_ops vt8500_uart_pops = {
+ .tx_empty = vt8500_tx_empty,
+ .set_mctrl = vt8500_set_mctrl,
+ .get_mctrl = vt8500_get_mctrl,
+ .stop_tx = vt8500_stop_tx,
+ .start_tx = vt8500_start_tx,
+ .stop_rx = vt8500_stop_rx,
+ .enable_ms = vt8500_enable_ms,
+ .break_ctl = vt8500_break_ctl,
+ .startup = vt8500_startup,
+ .shutdown = vt8500_shutdown,
+ .set_termios = vt8500_set_termios,
+ .type = vt8500_type,
+ .release_port = vt8500_release_port,
+ .request_port = vt8500_request_port,
+ .config_port = vt8500_config_port,
+ .verify_port = vt8500_verify_port,
+};
+
+static struct uart_driver vt8500_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "vt8500_serial",
+ .dev_name = "ttyWMT",
+ .nr = 6,
+ .cons = VT8500_CONSOLE,
+};
+
+static int __init vt8500_serial_probe(struct platform_device *pdev)
+{
+ struct vt8500_port *vt8500_port;
+ struct resource *mmres, *irqres;
+ int ret;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mmres || !irqres)
+ return -ENODEV;
+
+ vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+ if (!vt8500_port)
+ return -ENOMEM;
+
+ vt8500_port->uart.type = PORT_VT8500;
+ vt8500_port->uart.iotype = UPIO_MEM;
+ vt8500_port->uart.mapbase = mmres->start;
+ vt8500_port->uart.irq = irqres->start;
+ vt8500_port->uart.fifosize = 16;
+ vt8500_port->uart.ops = &vt8500_uart_pops;
+ vt8500_port->uart.line = pdev->id;
+ vt8500_port->uart.dev = &pdev->dev;
+ vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ vt8500_port->uart.uartclk = 24000000;
+
+ snprintf(vt8500_port->name, sizeof(vt8500_port->name),
+ "VT8500 UART%d", pdev->id);
+
+ vt8500_port->uart.membase = ioremap(mmres->start,
+ mmres->end - mmres->start + 1);
+ if (!vt8500_port->uart.membase) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ vt8500_uart_ports[pdev->id] = vt8500_port;
+
+ uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
+
+ platform_set_drvdata(pdev, vt8500_port);
+
+ return 0;
+
+err:
+ kfree(vt8500_port);
+ return ret;
+}
+
+static int __devexit vt8500_serial_remove(struct platform_device *pdev)
+{
+ struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
+ kfree(vt8500_port);
+
+ return 0;
+}
+
+static struct platform_driver vt8500_platform_driver = {
+ .probe = vt8500_serial_probe,
+ .remove = vt8500_serial_remove,
+ .driver = {
+ .name = "vt8500_serial",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init vt8500_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&vt8500_uart_driver);
+ if (unlikely(ret))
+ return ret;
+
+ ret = platform_driver_register(&vt8500_platform_driver);
+
+ if (unlikely(ret))
+ uart_unregister_driver(&vt8500_uart_driver);
+
+ return ret;
+}
+
+static void __exit vt8500_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_VT8500_CONSOLE
+ unregister_console(&vt8500_console);
+#endif
+ platform_driver_unregister(&vt8500_platform_driver);
+ uart_unregister_driver(&vt8500_uart_driver);
+}
+
+module_init(vt8500_serial_init);
+module_exit(vt8500_serial_exit);
+
+MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
+MODULE_DESCRIPTION("Driver for vt8500 serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c5f8e5b..44b8412 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -19,7 +19,7 @@
*
* TO DO:
* Mostly done: ioctls for setting modes/timing
- * Partly done: hooks so you can pull off frames to non tty devs
+ * Partly done: hooks so you can pull off frames to non tty devs
* Restart DLCI 0 when it closes ?
* Test basic encoding
* Improve the tx engine
@@ -73,8 +73,10 @@ module_param(debug, int, 0600);
#define T2 (2 * HZ)
#endif
-/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
- limits so this is plenty */
+/*
+ * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * limits so this is plenty
+ */
#define MAX_MRU 512
#define MAX_MTU 512
@@ -184,6 +186,9 @@ struct gsm_mux {
#define GSM_DATA 5
#define GSM_FCS 6
#define GSM_OVERRUN 7
+#define GSM_LEN0 8
+#define GSM_LEN1 9
+#define GSM_SSOF 10
unsigned int len;
unsigned int address;
unsigned int count;
@@ -191,6 +196,7 @@ struct gsm_mux {
int encoding;
u8 control;
u8 fcs;
+ u8 received_fcs;
u8 *txframe; /* TX framing buffer */
/* Methods for the receiver side */
@@ -286,7 +292,7 @@ static spinlock_t gsm_mux_lock;
#define MDM_DV 0x40
#define GSM0_SOF 0xF9
-#define GSM1_SOF 0x7E
+#define GSM1_SOF 0x7E
#define GSM1_ESCAPE 0x7D
#define GSM1_ESCAPE_BITS 0x20
#define XON 0x11
@@ -429,61 +435,63 @@ static void gsm_print_packet(const char *hdr, int addr, int cr,
if (!(debug & 1))
return;
- printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]);
+ pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
switch (control & ~PF) {
case SABM:
- printk(KERN_CONT "SABM");
+ pr_cont("SABM");
break;
case UA:
- printk(KERN_CONT "UA");
+ pr_cont("UA");
break;
case DISC:
- printk(KERN_CONT "DISC");
+ pr_cont("DISC");
break;
case DM:
- printk(KERN_CONT "DM");
+ pr_cont("DM");
break;
case UI:
- printk(KERN_CONT "UI");
+ pr_cont("UI");
break;
case UIH:
- printk(KERN_CONT "UIH");
+ pr_cont("UIH");
break;
default:
if (!(control & 0x01)) {
- printk(KERN_CONT "I N(S)%d N(R)%d",
- (control & 0x0E) >> 1, (control & 0xE)>> 5);
+ pr_cont("I N(S)%d N(R)%d",
+ (control & 0x0E) >> 1, (control & 0xE) >> 5);
} else switch (control & 0x0F) {
- case RR:
- printk("RR(%d)", (control & 0xE0) >> 5);
- break;
- case RNR:
- printk("RNR(%d)", (control & 0xE0) >> 5);
- break;
- case REJ:
- printk("REJ(%d)", (control & 0xE0) >> 5);
- break;
- default:
- printk(KERN_CONT "[%02X]", control);
+ case RR:
+ pr_cont("RR(%d)", (control & 0xE0) >> 5);
+ break;
+ case RNR:
+ pr_cont("RNR(%d)", (control & 0xE0) >> 5);
+ break;
+ case REJ:
+ pr_cont("REJ(%d)", (control & 0xE0) >> 5);
+ break;
+ default:
+ pr_cont("[%02X]", control);
}
}
if (control & PF)
- printk(KERN_CONT "(P)");
+ pr_cont("(P)");
else
- printk(KERN_CONT "(F)");
+ pr_cont("(F)");
if (dlen) {
int ct = 0;
while (dlen--) {
- if (ct % 8 == 0)
- printk(KERN_CONT "\n ");
- printk(KERN_CONT "%02X ", *data++);
+ if (ct % 8 == 0) {
+ pr_cont("\n");
+ pr_debug(" ");
+ }
+ pr_cont("%02X ", *data++);
ct++;
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
@@ -522,11 +530,13 @@ static void hex_packet(const unsigned char *p, int len)
{
int i;
for (i = 0; i < len; i++) {
- if (i && (i % 16) == 0)
- printk("\n");
- printk("%02X ", *p++);
+ if (i && (i % 16) == 0) {
+ pr_cont("\n");
+ pr_debug("");
+ }
+ pr_cont("%02X ", *p++);
}
- printk("\n");
+ pr_cont("\n");
}
/**
@@ -676,7 +686,7 @@ static void gsm_data_kick(struct gsm_mux *gsm)
}
if (debug & 4) {
- printk("gsm_data_kick: \n");
+ pr_debug("gsm_data_kick:\n");
hex_packet(gsm->txframe, len);
}
@@ -1231,7 +1241,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
}
/**
- * gsm_control_transmit - send control packet
+ * gsm_control_transmit - send control packet
* @gsm: gsm mux
* @ctrl: frame to send
*
@@ -1361,7 +1371,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
{
del_timer(&dlci->t1);
if (debug & 8)
- printk("DLCI %d goes closed.\n", dlci->addr);
+ pr_debug("DLCI %d goes closed.\n", dlci->addr);
dlci->state = DLCI_CLOSED;
if (dlci->addr != 0) {
struct tty_struct *tty = tty_port_tty_get(&dlci->port);
@@ -1392,7 +1402,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
/* This will let a tty open continue */
dlci->state = DLCI_OPEN;
if (debug & 8)
- printk("DLCI %d goes open.\n", dlci->addr);
+ pr_debug("DLCI %d goes open.\n", dlci->addr);
wake_up(&dlci->gsm->event);
}
@@ -1494,29 +1504,29 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
unsigned int modem = 0;
if (debug & 16)
- printk("%d bytes for tty %p\n", len, tty);
+ pr_debug("%d bytes for tty %p\n", len, tty);
if (tty) {
switch (dlci->adaption) {
- /* Unsupported types */
- /* Packetised interruptible data */
- case 4:
- break;
- /* Packetised uininterruptible voice/data */
- case 3:
- break;
- /* Asynchronous serial with line state in each frame */
- case 2:
- while (gsm_read_ea(&modem, *data++) == 0) {
- len--;
- if (len == 0)
- return;
- }
- gsm_process_modem(tty, dlci, modem);
- /* Line state will go via DLCI 0 controls only */
- case 1:
- default:
- tty_insert_flip_string(tty, data, len);
- tty_flip_buffer_push(tty);
+ /* Unsupported types */
+ /* Packetised interruptible data */
+ case 4:
+ break;
+ /* Packetised uininterruptible voice/data */
+ case 3:
+ break;
+ /* Asynchronous serial with line state in each frame */
+ case 2:
+ while (gsm_read_ea(&modem, *data++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ gsm_process_modem(tty, dlci, modem);
+ /* Line state will go via DLCI 0 controls only */
+ case 1:
+ default:
+ tty_insert_flip_string(tty, data, len);
+ tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
}
@@ -1625,7 +1635,6 @@ static void gsm_dlci_free(struct gsm_dlci *dlci)
kfree(dlci);
}
-
/*
* LAPBish link layer logic
*/
@@ -1650,10 +1659,12 @@ static void gsm_queue(struct gsm_mux *gsm)
if ((gsm->control & ~PF) == UI)
gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
+ /* generate final CRC with received FCS */
+ gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
if (gsm->fcs != GOOD_FCS) {
gsm->bad_fcs++;
if (debug & 4)
- printk("BAD FCS %02x\n", gsm->fcs);
+ pr_debug("BAD FCS %02x\n", gsm->fcs);
return;
}
address = gsm->address >> 1;
@@ -1748,6 +1759,8 @@ invalid:
static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
{
+ unsigned int len;
+
switch (gsm->state) {
case GSM_SEARCH: /* SOF marker */
if (c == GSM0_SOF) {
@@ -1756,8 +1769,8 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
gsm->len = 0;
gsm->fcs = INIT_FCS;
}
- break; /* Address EA */
- case GSM_ADDRESS:
+ break;
+ case GSM_ADDRESS: /* Address EA */
gsm->fcs = gsm_fcs_add(gsm->fcs, c);
if (gsm_read_ea(&gsm->address, c))
gsm->state = GSM_CONTROL;
@@ -1765,9 +1778,9 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
case GSM_CONTROL: /* Control Byte */
gsm->fcs = gsm_fcs_add(gsm->fcs, c);
gsm->control = c;
- gsm->state = GSM_LEN;
+ gsm->state = GSM_LEN0;
break;
- case GSM_LEN: /* Length EA */
+ case GSM_LEN0: /* Length EA */
gsm->fcs = gsm_fcs_add(gsm->fcs, c);
if (gsm_read_ea(&gsm->len, c)) {
if (gsm->len > gsm->mru) {
@@ -1776,8 +1789,28 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
break;
}
gsm->count = 0;
- gsm->state = GSM_DATA;
+ if (!gsm->len)
+ gsm->state = GSM_FCS;
+ else
+ gsm->state = GSM_DATA;
+ break;
+ }
+ gsm->state = GSM_LEN1;
+ break;
+ case GSM_LEN1:
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ len = c;
+ gsm->len |= len << 7;
+ if (gsm->len > gsm->mru) {
+ gsm->bad_size++;
+ gsm->state = GSM_SEARCH;
+ break;
}
+ gsm->count = 0;
+ if (!gsm->len)
+ gsm->state = GSM_FCS;
+ else
+ gsm->state = GSM_DATA;
break;
case GSM_DATA: /* Data */
gsm->buf[gsm->count++] = c;
@@ -1785,16 +1818,25 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
gsm->state = GSM_FCS;
break;
case GSM_FCS: /* FCS follows the packet */
- gsm->fcs = c;
+ gsm->received_fcs = c;
+ if (c == GSM0_SOF) {
+ gsm->state = GSM_SEARCH;
+ break;
+ }
gsm_queue(gsm);
- /* And then back for the next frame */
- gsm->state = GSM_SEARCH;
+ gsm->state = GSM_SSOF;
+ break;
+ case GSM_SSOF:
+ if (c == GSM0_SOF) {
+ gsm->state = GSM_SEARCH;
+ break;
+ }
break;
}
}
/**
- * gsm0_receive - perform processing for non-transparency
+ * gsm1_receive - perform processing for non-transparency
* @gsm: gsm data for this ldisc instance
* @c: character
*
@@ -1856,7 +1898,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
gsm->state = GSM_DATA;
break;
case GSM_DATA: /* Data */
- if (gsm->count > gsm->mru ) { /* Allow one for the FCS */
+ if (gsm->count > gsm->mru) { /* Allow one for the FCS */
gsm->state = GSM_OVERRUN;
gsm->bad_size++;
} else
@@ -2034,9 +2076,6 @@ struct gsm_mux *gsm_alloc_mux(void)
}
EXPORT_SYMBOL_GPL(gsm_alloc_mux);
-
-
-
/**
* gsmld_output - write to link
* @gsm: our mux
@@ -2054,7 +2093,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
return -ENOSPC;
}
if (debug & 4) {
- printk("-->%d bytes out\n", len);
+ pr_debug("-->%d bytes out\n", len);
hex_packet(data, len);
}
gsm->tty->ops->write(gsm->tty, data, len);
@@ -2111,7 +2150,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char flags;
if (debug & 4) {
- printk("Inbytes %dd\n", count);
+ pr_debug("Inbytes %dd\n", count);
hex_packet(cp, count);
}
@@ -2128,7 +2167,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
gsm->error(gsm, *dp, flags);
break;
default:
- printk(KERN_ERR "%s: unknown flag %d\n",
+ WARN_ONCE("%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
@@ -2323,7 +2362,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
int need_restart = 0;
/* Stuff we don't support yet - UI or I frame transport, windowing */
- if ((c->adaption !=1 && c->adaption != 2) || c->k)
+ if ((c->adaption != 1 && c->adaption != 2) || c->k)
return -EOPNOTSUPP;
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
@@ -2418,7 +2457,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
c.i = 1;
else
c.i = 2;
- printk("Ftype %d i %d\n", gsm->ftype, c.i);
+ pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
c.mru = gsm->mru;
c.mtu = gsm->mtu;
c.k = 0;
@@ -2712,14 +2751,15 @@ static int __init gsm_init(void)
/* Fill in our line protocol discipline, and register it */
int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet);
if (status != 0) {
- printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status);
+ pr_err("n_gsm: can't register line discipline (err = %d)\n",
+ status);
return status;
}
gsm_tty_driver = alloc_tty_driver(256);
if (!gsm_tty_driver) {
tty_unregister_ldisc(N_GSM0710);
- printk(KERN_ERR "gsm_init: tty allocation failed.\n");
+ pr_err("gsm_init: tty allocation failed.\n");
return -EINVAL;
}
gsm_tty_driver->owner = THIS_MODULE;
@@ -2730,7 +2770,7 @@ static int __init gsm_init(void)
gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
- | TTY_DRIVER_HARDWARE_BREAK;
+ | TTY_DRIVER_HARDWARE_BREAK;
gsm_tty_driver->init_termios = tty_std_termios;
/* Fixme */
gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
@@ -2741,10 +2781,11 @@ static int __init gsm_init(void)
if (tty_register_driver(gsm_tty_driver)) {
put_tty_driver(gsm_tty_driver);
tty_unregister_ldisc(N_GSM0710);
- printk(KERN_ERR "gsm_init: tty registration failed.\n");
+ pr_err("gsm_init: tty registration failed.\n");
return -EBUSY;
}
- printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start);
+ pr_debug("gsm_init: loaded as %d,%d.\n",
+ gsm_tty_driver->major, gsm_tty_driver->minor_start);
return 0;
}
@@ -2752,10 +2793,10 @@ static void __exit gsm_exit(void)
{
int status = tty_unregister_ldisc(N_GSM0710);
if (status != 0)
- printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status);
+ pr_err("n_gsm: can't unregister line discipline (err = %d)\n",
+ status);
tty_unregister_driver(gsm_tty_driver);
put_tty_driver(gsm_tty_driver);
- printk(KERN_INFO "gsm_init: unloaded.\n");
}
module_init(gsm_init);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 35480dd..464d09d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2627,6 +2627,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return put_user(tty->ldisc->ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
+ case TIOCGDEV:
+ {
+ unsigned int ret = new_encode_dev(tty_devnum(real_tty));
+ return put_user(ret, (unsigned int __user *)p);
+ }
/*
* Break handling
*/
@@ -3241,9 +3246,45 @@ static int __init tty_class_init(void)
postcore_initcall(tty_class_init);
/* 3/2004 jmc: why do these devices exist? */
-
static struct cdev tty_cdev, console_cdev;
+static ssize_t show_cons_active(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct console *cs[16];
+ int i = 0;
+ struct console *c;
+ ssize_t count = 0;
+
+ acquire_console_sem();
+ for (c = console_drivers; c; c = c->next) {
+ if (!c->device)
+ continue;
+ if (!c->write)
+ continue;
+ if ((c->flags & CON_ENABLED) == 0)
+ continue;
+ cs[i++] = c;
+ if (i >= ARRAY_SIZE(cs))
+ break;
+ }
+ while (i--)
+ count += sprintf(buf + count, "%s%d%c",
+ cs[i]->name, cs[i]->index, i ? ' ':'\n');
+ release_console_sem();
+
+ return count;
+}
+static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
+
+static struct device *consdev;
+
+void console_sysfs_notify(void)
+{
+ if (consdev)
+ sysfs_notify(&consdev->kobj, NULL, "active");
+}
+
/*
* Ok, now we can initialize the rest of the tty devices and can count
* on memory allocations, interrupts etc..
@@ -3254,15 +3295,18 @@ int __init tty_init(void)
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
- device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
- "tty");
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
- device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+ consdev = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
"console");
+ if (IS_ERR(consdev))
+ consdev = NULL;
+ else
+ device_create_file(consdev, &dev_attr_active);
#ifdef CONFIG_VT
vty_init(&console_fops);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index a8ec48e..76407ec 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -236,6 +236,14 @@ enum {
};
/*
+ * /sys/class/tty/tty0/
+ *
+ * the attribute 'active' contains the name of the current vc
+ * console and it supports poll() to detect vc switches
+ */
+static struct device *tty0dev;
+
+/*
* Notifier list for console events.
*/
static ATOMIC_NOTIFIER_HEAD(vt_notifier_list);
@@ -688,6 +696,8 @@ void redraw_screen(struct vc_data *vc, int is_switch)
save_screen(old_vc);
set_origin(old_vc);
}
+ if (tty0dev)
+ sysfs_notify(&tty0dev->kobj, NULL, "active");
} else {
hide_cursor(vc);
redraw = 1;
@@ -2967,13 +2977,24 @@ static const struct tty_operations con_ops = {
static struct cdev vc0_cdev;
+static ssize_t show_tty_active(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "tty%d\n", fg_console + 1);
+}
+static DEVICE_ATTR(active, S_IRUGO, show_tty_active, NULL);
+
int __init vty_init(const struct file_operations *console_fops)
{
cdev_init(&vc0_cdev, console_fops);
if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
- device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+ tty0dev = device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+ if (IS_ERR(tty0dev))
+ tty0dev = NULL;
+ else
+ device_create_file(tty0dev, &dev_attr_active);
vcs_init();
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 428d273..4abb0b9 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -492,7 +492,7 @@ xenfb_make_preferred_console(void)
return;
acquire_console_sem();
- for (c = console_drivers; c; c = c->next) {
+ for_each_console(c) {
if (!strcmp(c->name, "tty") && c->index == 0)
break;
}
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 175736c..61abb63 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -836,6 +836,7 @@ COMPATIBLE_IOCTL(TCSETSW)
COMPATIBLE_IOCTL(TCSETSF)
COMPATIBLE_IOCTL(TIOCLINUX)
COMPATIBLE_IOCTL(TIOCSBRK)
+COMPATIBLE_IOCTL(TIOCGDEV)
COMPATIBLE_IOCTL(TIOCCBRK)
COMPATIBLE_IOCTL(TIOCGSID)
COMPATIBLE_IOCTL(TIOCGICOUNT)
diff --git a/fs/proc/Makefile b/fs/proc/Makefile
index 2758e2a..288a49e0 100644
--- a/fs/proc/Makefile
+++ b/fs/proc/Makefile
@@ -15,6 +15,7 @@ proc-y += devices.o
proc-y += interrupts.o
proc-y += loadavg.o
proc-y += meminfo.o
+proc-y += proc_console.o
proc-y += stat.o
proc-y += uptime.o
proc-y += version.o
diff --git a/fs/proc/proc_console.c b/fs/proc/proc_console.c
new file mode 100644
index 0000000..8a70760
--- /dev/null
+++ b/fs/proc/proc_console.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2010 Werner Fink, Jiri Slaby
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/tty_driver.h>
+
+/*
+ * This is handler for /proc/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+ static const struct {
+ short flag;
+ char name;
+ } con_flags[] = {
+ { CON_ENABLED, 'E' },
+ { CON_CONSDEV, 'C' },
+ { CON_BOOT, 'B' },
+ { CON_PRINTBUFFER, 'p' },
+ { CON_BRL, 'b' },
+ { CON_ANYTIME, 'a' },
+ };
+ char flags[ARRAY_SIZE(con_flags) + 1];
+ struct console *con = v;
+ unsigned int a;
+ int len;
+ dev_t dev = 0;
+
+ if (con->device) {
+ const struct tty_driver *driver;
+ int index;
+ driver = con->device(con, &index);
+ if (driver) {
+ dev = MKDEV(driver->major, driver->minor_start);
+ dev += index;
+ }
+ }
+
+ for (a = 0; a < ARRAY_SIZE(con_flags); a++)
+ flags[a] = (con->flags & con_flags[a].flag) ?
+ con_flags[a].name : ' ';
+ flags[a] = 0;
+
+ seq_printf(m, "%s%d%n", con->name, con->index, &len);
+ len = 21 - len;
+ if (len < 1)
+ len = 1;
+ seq_printf(m, "%*c%c%c%c (%s)", len, ' ', con->read ? 'R' : '-',
+ con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+ flags);
+ if (dev)
+ seq_printf(m, " %4d:%d", MAJOR(dev), MINOR(dev));
+
+ seq_printf(m, "\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ struct console *con;
+ loff_t off = 0;
+
+ acquire_console_sem();
+ for_each_console(con)
+ if (off++ == *pos)
+ break;
+
+ return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct console *con = v;
+ ++*pos;
+ return con->next;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+ release_console_sem();
+}
+
+static const struct seq_operations consoles_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_console_dev
+};
+
+static int consoles_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &consoles_op);
+}
+
+static const struct file_operations proc_consoles_operations = {
+ .open = consoles_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int register_proc_consoles(void)
+{
+ proc_create("consoles", 0, NULL, &proc_consoles_operations);
+ return 0;
+}
+module_init(register_proc_consoles);
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index a321665..3f3f2d1 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -67,6 +67,7 @@
#endif
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */
#define TCSETX 0x5433
#define TCSETXF 0x5434
diff --git a/include/linux/console.h b/include/linux/console.h
index 95cf6f0..9774fe6 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -126,6 +126,12 @@ struct console {
struct console *next;
};
+/*
+ * for_each_console() allows you to iterate on each console
+ */
+#define for_each_console(con) \
+ for (con = console_drivers; con != NULL; con = con->next)
+
extern int console_set_on_cmdline;
extern int add_preferred_console(char *name, int idx, char *options);
@@ -145,7 +151,7 @@ extern int is_console_locked(void);
extern int braille_register_console(struct console *, int index,
char *console_options, char *braille_options);
extern int braille_unregister_console(struct console *);
-
+extern void console_sysfs_notify(void);
extern int console_suspend_enabled;
/* Suspend and resume console messages over PM events */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 212eb4c..a23fa29 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -95,7 +95,7 @@
/* PPC CPM type number */
#define PORT_CPM 58
-/* MPC52xx type numbers */
+/* MPC52xx (and MPC512x) type numbers */
#define PORT_MPC52xx 59
/* IBM icom */
@@ -199,6 +199,9 @@
/* TI OMAP-UART */
#define PORT_OMAP 96
+/* VIA VT8500 SoC */
+#define PORT_VT8500 97
+
#ifdef __KERNEL__
#include <linux/compiler.h>
@@ -311,6 +314,7 @@ struct uart_port {
#define UPIO_TSI (5) /* Tsi108/109 type IO */
#define UPIO_DWAPB (6) /* DesignWare APB UART */
#define UPIO_RM9000 (7) /* RM9000 type IO */
+#define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
@@ -361,6 +365,7 @@ struct uart_port {
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char suspended;
+ unsigned char irq_wake;
unsigned char unused[2];
void *private_data; /* generic platform data pointer */
};
diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h
new file mode 100644
index 0000000..a68f3b1
--- /dev/null
+++ b/include/linux/spi/ifx_modem.h
@@ -0,0 +1,14 @@
+#ifndef LINUX_IFX_MODEM_H
+#define LINUX_IFX_MODEM_H
+
+struct ifx_modem_platform_data {
+ unsigned short rst_out; /* modem reset out */
+ unsigned short pwr_on; /* power on */
+ unsigned short rst_pmu; /* reset modem */
+ unsigned short tx_pwr; /* modem power threshold */
+ unsigned short srdy; /* SRDY */
+ unsigned short mrdy; /* MRDY */
+ unsigned short is_6160; /* Modem type */
+};
+
+#endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index db2d227..c3d43eb 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -102,7 +102,7 @@
* unsigned int cmd, unsigned long arg);
*
* This routine allows the tty driver to implement
- * device-specific ioctl's. If the ioctl number passed in cmd
+ * device-specific ioctls. If the ioctl number passed in cmd
* is not recognized by the driver, it should return ENOIOCTLCMD.
*
* Optional
@@ -167,12 +167,12 @@
*
* void (*hangup)(struct tty_struct *tty);
*
- * This routine notifies the tty driver that it should hangup the
+ * This routine notifies the tty driver that it should hang up the
* tty device.
*
* Optional:
*
- * int (*break_ctl)(struct tty_stuct *tty, int state);
+ * int (*break_ctl)(struct tty_struct *tty, int state);
*
* This optional routine requests the tty driver to turn on or
* off BREAK status on the RS-232 port. If state is -1,
@@ -235,6 +235,7 @@
#include <linux/fs.h>
#include <linux/list.h>
#include <linux/cdev.h>
+#include <linux/termios.h>
struct tty_struct;
struct tty_driver;
@@ -357,7 +358,7 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
* overruns, either.)
*
* TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
- * to be registered with a call to tty_register_driver() when the
+ * to be registered with a call to tty_register_device() when the
* device is found in the system and unregistered with a call to
* tty_unregister_device() so the devices will be show up
* properly in sysfs. If not set, driver->num entries will be
diff --git a/kernel/printk.c b/kernel/printk.c
index ab3ffc5..4642a5c 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -43,12 +43,6 @@
#include <asm/uaccess.h>
/*
- * for_each_console() allows you to iterate on each console
- */
-#define for_each_console(con) \
- for (con = console_drivers; con != NULL; con = con->next)
-
-/*
* Architectures can override it:
*/
void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...)
@@ -1359,6 +1353,7 @@ void register_console(struct console *newcon)
spin_unlock_irqrestore(&logbuf_lock, flags);
}
release_console_sem();
+ console_sysfs_notify();
/*
* By unregistering the bootconsoles after we enable the real console
@@ -1417,6 +1412,7 @@ int unregister_console(struct console *console)
console_drivers->flags |= CON_CONSDEV;
release_console_sem();
+ console_sysfs_notify();
return res;
}
EXPORT_SYMBOL(unregister_console);
OpenPOWER on IntegriCloud