Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

325 files changed, 4611 insertions, 2240 deletions

diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 5d2480d..ecad6ee 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -954,14 +954,14 @@ elevator_allow_merge_fn		called whenever the block layer determines
 				results in some sort of conflict internally,
 				this hook allows it to do that.
 
-elevator_dispatch_fn		fills the dispatch queue with ready requests.
+elevator_dispatch_fn*		fills the dispatch queue with ready requests.
 				I/O schedulers are free to postpone requests by
 				not filling the dispatch queue unless @force
 				is non-zero.  Once dispatched, I/O schedulers
 				are not allowed to manipulate the requests -
 				they belong to generic dispatch queue.
 
-elevator_add_req_fn		called to add a new request into the scheduler
+elevator_add_req_fn*		called to add a new request into the scheduler
 
 elevator_queue_empty_fn		returns true if the merge queue is empty.
 				Drivers shouldn't use this, but rather check
@@ -991,7 +991,7 @@ elevator_activate_req_fn	Called when device driver first sees a request.
 elevator_deactivate_req_fn	Called when device driver decides to delay
 				a request by requeueing it.
 
-elevator_init_fn
+elevator_init_fn*
 elevator_exit_fn		Allocate and free any elevator specific storage
 				for a queue.
 
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
new file mode 100644
index 0000000..e164403
--- /dev/null
+++ b/Documentation/block/queue-sysfs.txt
@@ -0,0 +1,63 @@
+Queue sysfs files
+=================
+
+This text file will detail the queue files that are located in the sysfs tree
+for each block device. Note that stacked devices typically do not export
+any settings, since their queue merely functions are a remapping target.
+These files are the ones found in the /sys/block/xxx/queue/ directory.
+
+Files denoted with a RO postfix are readonly and the RW postfix means
+read-write.
+
+hw_sector_size (RO)
+-------------------
+This is the hardware sector size of the device, in bytes.
+
+max_hw_sectors_kb (RO)
+----------------------
+This is the maximum number of kilobytes supported in a single data transfer.
+
+max_sectors_kb (RW)
+-------------------
+This is the maximum number of kilobytes that the block layer will allow
+for a filesystem request. Must be smaller than or equal to the maximum
+size allowed by the hardware.
+
+nomerges (RW)
+-------------
+This enables the user to disable the lookup logic involved with IO merging
+requests in the block layer. Merging may still occur through a direct
+1-hit cache, since that comes for (almost) free. The IO scheduler will not
+waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
+to 0, enabling all merges.
+
+nr_requests (RW)
+----------------
+This controls how many requests may be allocated in the block layer for
+read or write requests. Note that the total allocated number may be twice
+this amount, since it applies only to reads or writes (not the accumulated
+sum).
+
+read_ahead_kb (RW)
+------------------
+Maximum number of kilobytes to read-ahead for filesystems on this block
+device.
+
+rq_affinity (RW)
+----------------
+If this option is enabled, the block layer will migrate request completions
+to the CPU that originally submitted the request. For some workloads
+this provides a significant reduction in CPU cycles due to caching effects.
+
+scheduler (RW)
+--------------
+When read, this file will display the current and available IO schedulers
+for this block device. The currently active IO scheduler will be enclosed
+in [] brackets. Writing an IO scheduler name to this file will switch
+control of this block device to that new IO scheduler. Note that writing
+an IO scheduler name to this file will attempt to load that IO scheduler
+module, if it isn't already present in the system.
+
+
+
+Jens Axboe <jens.axboe@oracle.com>, February 2009
diff --git a/Documentation/networking/alias.txt b/Documentation/networking/alias.txt
index cd12c2f..85046f5 100644
--- a/Documentation/networking/alias.txt
+++ b/Documentation/networking/alias.txt
@@ -2,13 +2,13 @@
 IP-Aliasing:
 ============
 
-IP-aliases are additional IP-addresses/masks hooked up to a base 
-interface by adding a colon and a string when running ifconfig. 
-This string is usually numeric, but this is not a must.
-
-IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking) 
-is configured in the kernel.
+IP-aliases are an obsolete way to manage multiple IP-addresses/masks
+per interface. Newer tools such as iproute2 support multiple
+address/prefixes per interface, but aliases are still supported
+for backwards compatibility.
 
+An alias is formed by adding a colon and a string when running ifconfig.
+This string is usually numeric, but this is not a must.
 
 o Alias creation.
   Alias creation is done by 'magic' interface naming: eg. to create a
@@ -38,16 +38,3 @@ o Relationship with main device
 
   If the base device is shut down the added aliases will be deleted 
   too.
-
-
-Contact
--------
-Please finger or e-mail me:
-   Juan Jose Ciarlante <jjciarla@raiz.uncu.edu.ar>
-
-Updated by Erik Schoenfelder <schoenfr@gaertner.DE>
-
-; local variables:
-; mode: indented-text
-; mode: auto-fill
-; end:
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
new file mode 100644
index 0000000..8447fd7
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -0,0 +1,180 @@
+MPC5200 Device Tree Bindings
+----------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+Naming conventions
+------------------
+For mpc5200 on-chip devices, the format for each compatible value is
+<chip>-<device>[-<mode>].  The OS should be able to match a device driver
+to the device based solely on the compatible value.  If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+conundrum.  How should the compatible property be set up to provide
+maximum compatibility information; but still accurately describe the
+chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
+originally appeared on the MPC5200.  Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"fsl,mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite.  It fixes
+silicon bugs and it adds a small number of enhancements.  Most of the
+devices either provide exactly the same interface as on the 5200.  A few
+devices have extra functions but still have a backwards compatible mode.
+To express this information as completely as possible, 5200B device trees
+should have two items in the compatible list:
+	compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+
+It is *strongly* recommended that 5200B device trees follow this convention
+(instead of only listing the base mpc5200 item).
+
+ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+    ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field.  ie. A PSC in i2s mode would specify
+"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s".  This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function.  For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+At the time of writing, exact chip may be either 'fsl,mpc5200' or
+'fsl,mpc5200b'.
+
+The soc node
+------------
+This node describes the on chip SOC peripherals.  Every mpc5200 based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name			description
+----			-----------
+ranges			Memory range of the internal memory mapped registers.
+			Should be <0 [baseaddr] 0xc000>
+reg			Should be <[baseaddr] 0x100>
+compatible		mpc5200: "fsl,mpc5200-immr"
+			mpc5200b: "fsl,mpc5200b-immr"
+system-frequency	'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+			clocks are derived from the fsystem clock.
+bus-frequency		IPB bus frequency in Hz.  Clock rate
+			used by most of the soc devices.
+
+soc child nodes
+---------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: The tables below show the value for the mpc5200.  A mpc5200b device
+tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+
+Required soc5200 child nodes:
+name				compatible		Description
+----				----------		-----------
+cdm@<addr>			fsl,mpc5200-cdm		Clock Distribution
+interrupt-controller@<addr>	fsl,mpc5200-pic		need an interrupt
+							controller to boot
+bestcomm@<addr>			fsl,mpc5200-bestcomm	Bestcomm DMA controller
+
+Recommended soc5200 child nodes; populate as needed for your board
+name		compatible		Description
+----		----------		-----------
+timer@<addr>	fsl,mpc5200-gpt		 General purpose timers
+gpio@<addr>	fsl,mpc5200-gpio	 MPC5200 simple gpio controller
+gpio@<addr>	fsl,mpc5200-gpio-wkup	 MPC5200 wakeup gpio controller
+rtc@<addr>	fsl,mpc5200-rtc		 Real time clock
+mscan@<addr>	fsl,mpc5200-mscan	 CAN bus controller
+pci@<addr>	fsl,mpc5200-pci		 PCI bridge
+serial@<addr>	fsl,mpc5200-psc-uart	 PSC in serial mode
+i2s@<addr>	fsl,mpc5200-psc-i2s	 PSC in i2s mode
+ac97@<addr>	fsl,mpc5200-psc-ac97	 PSC in ac97 mode
+spi@<addr>	fsl,mpc5200-psc-spi	 PSC in spi mode
+irda@<addr>	fsl,mpc5200-psc-irda	 PSC in IrDA mode
+spi@<addr>	fsl,mpc5200-spi		 MPC5200 spi device
+ethernet@<addr>	fsl,mpc5200-fec		 MPC5200 ethernet device
+ata@<addr>	fsl,mpc5200-ata		 IDE ATA interface
+i2c@<addr>	fsl,mpc5200-i2c		 I2C controller
+usb@<addr>	fsl,mpc5200-ohci,ohci-be USB controller
+xlb@<addr>	fsl,mpc5200-xlb		 XLB arbitrator
+
+fsl,mpc5200-gpt nodes
+---------------------
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'fsl,has-wdt'.
+
+An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
+add the following properties to the gpt node:
+	gpio-controller;
+	#gpio-cells = <2>;
+When referencing the GPIO line from another node, the first cell must always
+be zero and the second cell represents the gpio flags and described in the
+gpio device tree binding.
+
+An mpc5200-gpt can be used as a single line edge sensitive interrupt
+controller.  To do so, add the following properties to the gpt node:
+	interrupt-controller;
+	#interrupt-cells = <1>;
+When referencing the IRQ line from another node, the cell represents the
+sense mode; 1 for edge rising, 2 for edge falling.
+
+fsl,mpc5200-psc nodes
+---------------------
+The PSCs should include a cell-index which is the index of the PSC in
+hardware.  cell-index is used to determine which shared SoC registers to
+use when setting up PSC clocking.  cell-index number starts at '0'.  ie:
+	PSC1 has 'cell-index = <0>'
+	PSC4 has 'cell-index = <3>'
+
+PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
+
+
+fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+------------------------------------------------
+Each GPIO controller node should have the empty property gpio-controller and
+#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+according to the bit numbers in the GPIO control registers. The second cell
+is for flags which is currently unused.
+
+fsl,mpc5200-fec nodes
+---------------------
+The FEC node can specify one of the following properties to configure
+the MII link:
+- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+                    mode instead of MII
+- current-speed   - Specifies that the MII should be configured for a fixed
+                    speed.  This property should contain two cells.  The
+                    first cell specifies the speed in Mbps and the second
+                    should be '0' for half duplex and '1' for full duplex
+- phy-handle      - Contains a phandle to an Ethernet PHY.
+
+Interrupt controller (fsl,mpc5200-pic) node
+-------------------------------------------
+The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+Bestcomm dma engine has it's own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc5200 pic consists
+of three cells; <L1 L2 level>
+
+    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+    L2 := interrupt number; directly mapped from the value in the
+          "ICTL PerStat, MainStat, CritStat Encoded Register"
+    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+For external IRQs, use the following interrupt property values (how to
+specify external interrupts is a frequently asked question):
+External interrupts:
+	external irq0:	interrupts = <0 0 n>;
+	external irq1:	interrupts = <1 1 n>;
+	external irq2:	interrupts = <1 2 n>;
+	external irq3:	interrupts = <1 3 n>;
+'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
deleted file mode 100644
index 6f12f1c..0000000
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ /dev/null
@@ -1,277 +0,0 @@
-MPC5200 Device Tree Bindings
-----------------------------
-
-(c) 2006-2007 Secret Lab Technologies Ltd
-Grant Likely <grant.likely at secretlab.ca>
-
-********** DRAFT ***********
-* WARNING: Do not depend on the stability of these bindings just yet.
-* The MPC5200 device tree conventions are still in flux
-* Keep an eye on the linuxppc-dev mailing list for more details
-********** DRAFT ***********
-
-I - Introduction
-================
-Boards supported by the arch/powerpc architecture require device tree be
-passed by the boot loader to the kernel at boot time.  The device tree
-describes what devices are present on the board and how they are
-connected.  The device tree can either be passed as a binary blob (as
-described in Documentation/powerpc/booting-without-of.txt), or passed
-by Open Firmware (IEEE 1275) compatible firmware using an OF compatible
-client interface API.
-
-This document specifies the requirements on the device-tree for mpc5200
-based boards.  These requirements are above and beyond the details
-specified in either the Open Firmware spec or booting-without-of.txt
-
-All new mpc5200-based boards are expected to match this document.  In
-cases where this document is not sufficient to support a new board port,
-this document should be updated as part of adding the new board support.
-
-II - Philosophy
-===============
-The core of this document is naming convention.  The whole point of
-defining this convention is to reduce or eliminate the number of
-special cases required to support a 5200 board.  If all 5200 boards
-follow the same convention, then generic 5200 support code will work
-rather than coding special cases for each new board.
-
-This section tries to capture the thought process behind why the naming
-convention is what it is.
-
-1.  names
----------
-There is strong convention/requirements already established for children
-of the root node.  'cpus' describes the processor cores, 'memory'
-describes memory, and 'chosen' provides boot configuration.  Other nodes
-are added to describe devices attached to the processor local bus.
-
-Following convention already established with other system-on-chip
-processors, 5200 device trees should use the name 'soc5200' for the
-parent node of on chip devices, and the root node should be its parent.
-
-Child nodes are typically named after the configured function.  ie.
-the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'.
-
-2. device_type property
------------------------
-similar to the node name convention above; the device_type reflects the
-configured function of a device.  ie. 'serial' for a uart and 'spi' for
-an spi controller.  However, while node names *should* reflect the
-configured function, device_type *must* match the configured function
-exactly.
-
-3. compatible property
-----------------------
-Since device_type isn't enough to match devices to drivers, there also
-needs to be a naming convention for the compatible property.  Compatible
-is an list of device descriptions sorted from specific to generic.  For
-the mpc5200, the required format for each compatible value is
-<chip>-<device>[-<mode>].  The OS should be able to match a device driver
-to the device based solely on the compatible value.  If two drivers
-match on the compatible list; the 'most compatible' driver should be
-selected.
-
-The split between the MPC5200 and the MPC5200B leaves a bit of a
-conundrum.  How should the compatible property be set up to provide
-maximum compatibility information; but still accurately describe the
-chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
-originally appeared on the MPC5200.  Since they didn't exist anywhere
-else; the 5200 compatible properties will contain only one item;
-"mpc5200-<device>".
-
-The 5200B is almost the same as the 5200, but not quite.  It fixes
-silicon bugs and it adds a small number of enhancements.  Most of the
-devices either provide exactly the same interface as on the 5200.  A few
-devices have extra functions but still have a backwards compatible mode.
-To express this information as completely as possible, 5200B device trees
-should have two items in the compatible list;
-"mpc5200b-<device>\0mpc5200-<device>".  It is *strongly* recommended
-that 5200B device trees follow this convention (instead of only listing
-the base mpc5200 item).
-
-If another chip appear on the market with one of the mpc5200 SoC
-devices, then the compatible list should include mpc5200-<device>.
-
-ie. ethernet on mpc5200: compatible = "mpc5200-ethernet"
-    ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet"
-
-Modal devices, like PSCs, also append the configured function to the
-end of the compatible field.  ie. A PSC in i2s mode would specify
-"mpc5200-psc-i2s", not "mpc5200-i2s".  This convention is chosen to
-avoid naming conflicts with non-psc devices providing the same
-function.  For example, "mpc5200-spi" and "mpc5200-psc-spi" describe
-the mpc5200 simple spi device and a PSC spi mode respectively.
-
-If the soc device is more generic and present on other SOCs, the
-compatible property can specify the more generic device type also.
-
-ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan";
-
-At the time of writing, exact chip may be either 'mpc5200' or
-'mpc5200b'.
-
-Device drivers should always try to match as generically as possible.
-
-III - Structure
-===============
-The device tree for an mpc5200 board follows the structure defined in
-booting-without-of.txt with the following additional notes:
-
-0) the root node
-----------------
-Typical root description node; see booting-without-of
-
-1) The cpus node
-----------------
-The cpus node follows the basic layout described in booting-without-of.
-The bus-frequency property holds the XLB bus frequency
-The clock-frequency property holds the core frequency
-
-2) The memory node
-------------------
-Typical memory description node; see booting-without-of.
-
-3) The soc5200 node
--------------------
-This node describes the on chip SOC peripherals.  Every mpc5200 based
-board will have this node, and as such there is a common naming
-convention for SOC devices.
-
-Required properties:
-name			type		description
-----			----		-----------
-device_type		string		must be "soc"
-ranges			int		should be <0 baseaddr baseaddr+10000>
-reg			int		must be <baseaddr 10000>
-compatible		string		mpc5200: "mpc5200-soc"
-					mpc5200b: "mpc5200b-soc\0mpc5200-soc"
-system-frequency	int		Fsystem frequency; source of all
-					other clocks.
-bus-frequency		int		IPB bus frequency in HZ.  Clock rate
-					used by most of the soc devices.
-#interrupt-cells	int		must be <3>.
-
-Recommended properties:
-name			type		description
-----			----		-----------
-model			string		Exact model of the chip;
-					ie: model="fsl,mpc5200"
-revision		string		Silicon revision of chip
-					ie: revision="M08A"
-
-The 'model' and 'revision' properties are *strongly* recommended.  Having
-them presence acts as a bit of a safety net for working around as yet
-undiscovered bugs on one version of silicon.  For example, device drivers
-can use the model and revision properties to decide if a bug fix should
-be turned on.
-
-4) soc5200 child nodes
-----------------------
-Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
-
-Note: The tables below show the value for the mpc5200.  A mpc5200b device
-tree should use the "mpc5200b-<device>\0mpc5200-<device> form.
-
-Required soc5200 child nodes:
-name		device_type		compatible	Description
-----		-----------		----------	-----------
-cdm@<addr>	cdm			mpc5200-cmd	Clock Distribution
-pic@<addr>	interrupt-controller	mpc5200-pic	need an interrupt
-							controller to boot
-bestcomm@<addr>	dma-controller		mpc5200-bestcomm 5200 pic also requires
-							 the bestcomm device
-
-Recommended soc5200 child nodes; populate as needed for your board
-name		device_type	compatible	  Description
-----		-----------	----------	  -----------
-gpt@<addr>	gpt		fsl,mpc5200-gpt	  General purpose timers
-gpt@<addr>	gpt		fsl,mpc5200-gpt-gpio	General purpose
-							timers in GPIO mode
-gpio@<addr>			fsl,mpc5200-gpio	MPC5200 simple gpio
-							controller
-gpio@<addr>			fsl,mpc5200-gpio-wkup	MPC5200 wakeup gpio
-							controller
-rtc@<addr>	rtc		mpc5200-rtc	  Real time clock
-mscan@<addr>	mscan		mpc5200-mscan	  CAN bus controller
-pci@<addr>	pci		mpc5200-pci	  PCI bridge
-serial@<addr>	serial		mpc5200-psc-uart  PSC in serial mode
-i2s@<addr>	sound		mpc5200-psc-i2s	  PSC in i2s mode
-ac97@<addr>	sound		mpc5200-psc-ac97  PSC in ac97 mode
-spi@<addr>	spi		mpc5200-psc-spi	  PSC in spi mode
-irda@<addr>	irda		mpc5200-psc-irda  PSC in IrDA mode
-spi@<addr>	spi		mpc5200-spi	  MPC5200 spi device
-ethernet@<addr>	network		mpc5200-fec	  MPC5200 ethernet device
-ata@<addr>	ata		mpc5200-ata	  IDE ATA interface
-i2c@<addr>	i2c		mpc5200-i2c	  I2C controller
-usb@<addr>	usb-ohci-be	mpc5200-ohci,ohci-be	USB controller
-xlb@<addr>	xlb		mpc5200-xlb	  XLB arbitrator
-
-Important child node properties
-name		type		description
-----		----		-----------
-cell-index	int		When multiple devices are present, is the
-				index of the device in the hardware (ie. There
-				are 6 PSC on the 5200 numbered PSC1 to PSC6)
-				    PSC1 has 'cell-index = <0>'
-				    PSC4 has 'cell-index = <3>'
-
-5) General Purpose Timer nodes (child of soc5200 node)
-On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
-design supports the internal wdt, then the device node for GPT0 should
-include the empty property 'fsl,has-wdt'.
-
-6) PSC nodes (child of soc5200 node)
-PSC nodes can define the optional 'port-number' property to force assignment
-order of serial ports.  For example, PSC5 might be physically connected to
-the port labeled 'COM1' and PSC1 wired to 'COM1'.  In this case, PSC5 would
-have a "port-number = <0>" property, and PSC1 would have "port-number = <1>".
-
-PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
-i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
-compatible field.
-
-7) GPIO controller nodes
-Each GPIO controller node should have the empty property gpio-controller and
-#gpio-cells set to 2. First cell is the GPIO number which is interpreted
-according to the bit numbers in the GPIO control registers. The second cell
-is for flags which is currently unsused.
-
-8) FEC nodes
-The FEC node can specify one of the following properties to configure
-the MII link:
-"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
-                    mode instead of MII
-"current-speed"   - Specifies that the MII should be configured for a fixed
-                    speed.  This property should contain two cells.  The
-                    first cell specifies the speed in Mbps and the second
-                    should be '0' for half duplex and '1' for full duplex
-"phy-handle"      - Contains a phandle to an Ethernet PHY.
-
-IV - Extra Notes
-================
-
-1. Interrupt mapping
---------------------
-The mpc5200 pic driver splits hardware IRQ numbers into two levels.  The
-split reflects the layout of the PIC hardware itself, which groups
-interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
-Bestcomm dma engine has it's own set of interrupt sources which are
-cascaded off of peripheral interrupt 0, which the driver interprets as a
-fourth group, SDMA.
-
-The interrupts property for device nodes using the mpc5200 pic consists
-of three cells; <L1 L2 level>
-
-    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
-    L2 := interrupt number; directly mapped from the value in the
-          "ICTL PerStat, MainStat, CritStat Encoded Register"
-    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
-
-2. Shared registers
--------------------
-Some SoC devices share registers between them.  ie. the i2c devices use
-a single clock control register, and almost all device are affected by
-the port_config register.  Devices which need to manipulate shared regs
-should look to the parent SoC node.  The soc node is responsible
-for arbitrating all shared register access.
diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c
index 079b628..d6e70be 100644
--- a/Documentation/video4linux/v4lgrab.c
+++ b/Documentation/video4linux/v4lgrab.c
@@ -4,12 +4,21 @@
  *
  *	Compile with:
  *		gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
- *      Use as:
- *              v4lgrab >image.ppm
+ *	Use as:
+ *		v4lgrab >image.ppm
  *
  *	Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
- *      Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
- *      with minor modifications (Dave Forrest, drf5n@virginia.edu).
+ *	Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
+ *	with minor modifications (Dave Forrest, drf5n@virginia.edu).
+ *
+ *
+ *	For some cameras you may need to pre-load libv4l to perform
+ *	the necessary decompression, e.g.:
+ *
+ *	export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so
+ *	./v4lgrab >image.ppm
+ *
+ *	see http://hansdegoede.livejournal.com/3636.html for details.
  *
  */
 
@@ -24,7 +33,7 @@
 #include <linux/types.h>
 #include <linux/videodev.h>
 
-#define FILE "/dev/video0"
+#define VIDEO_DEV "/dev/video0"
 
 /* Stole this from tvset.c */
 
@@ -90,7 +99,7 @@ int get_brightness_adj(unsigned char *image, long size, int *brightness) {
 
 int main(int argc, char ** argv)
 {
-  int fd = open(FILE, O_RDONLY), f;
+  int fd = open(VIDEO_DEV, O_RDONLY), f;
   struct video_capability cap;
   struct video_window win;
   struct video_picture vpic;
@@ -100,13 +109,13 @@ int main(int argc, char ** argv)
   unsigned int i, src_depth;
 
   if (fd < 0) {
-    perror(FILE);
+    perror(VIDEO_DEV);
     exit(1);
   }
 
   if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
     perror("VIDIOGCAP");
-    fprintf(stderr, "(" FILE " not a video4linux device?)\n");
+    fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n");
     close(fd);
     exit(1);
   }
diff --git a/MAINTAINERS b/MAINTAINERS
index d992d40..474ec0c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2836,8 +2836,6 @@ S:	Maintained
 MAC80211
 P:	Johannes Berg
 M:	johannes@sipsolutions.net
-P:	Michael Wu
-M:	flamingice@sourmilk.net
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
new file mode 100644
index 0000000..de2128d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mmc.h
@@ -0,0 +1,36 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+/* board specific SDHC data, optional.
+ * If not present, a writable card with 3,3V is assumed.
+ */
+struct imxmmc_platform_data {
+	/* Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
+	int (*get_ro)(struct device *);
+
+	/* board specific hook to (de)initialize the SD slot.
+	 * The board code can call 'handler' on a card detection
+	 * change giving data as argument.
+	 */
+	int (*init)(struct device *dev, irq_handler_t handler, void *data);
+	void (*exit)(struct device *dev, void *data);
+
+	/* available voltages. If not given, assume
+	 * MMC_VDD_32_33 | MMC_VDD_33_34
+	 */
+	unsigned int ocr_avail;
+
+	/* adjust slot voltage */
+	void (*setpower)(struct device *, unsigned int vdd);
+};
+
+#endif
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 52c80c2..600eef3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -351,7 +351,7 @@ config SGI_IP27
 	select ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select DMA_IP27
+	select DMA_COHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -761,9 +761,6 @@ config CFE
 config DMA_COHERENT
 	bool
 
-config DMA_IP27
-	bool
-
 config DMA_NONCOHERENT
 	bool
 	select DMA_NEED_PCI_MAP_STATE
@@ -1368,7 +1365,7 @@ config CPU_SUPPORTS_64BIT_KERNEL
 #
 config HARDWARE_WATCHPOINTS
        bool
-       default y if CPU_MIPS32 || CPU_MIPS64
+       default y if CPU_MIPSR1 || CPU_MIPSR2
 
 menu "Kernel type"
 
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 3288014..6fd441d 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -89,7 +89,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.irq		= AU1000_RTC_MATCH2_INT,
 	.set_next_event	= au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
-	.cpumask	= CPU_MASK_ALL,
+	.cpumask	= CPU_MASK_ALL_PTR,
 };
 
 static struct irqaction au1x_rtcmatch2_irqaction = {
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index e085fed..5f4e49b 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -15,13 +15,11 @@
 #include <linux/serial.h>
 #include <linux/types.h>
 #include <linux/string.h>	/* for memset */
-#include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/time.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
-#include <linux/string.h>
 
 #include <asm/processor.h>
 #include <asm/reboot.h>
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 34ea319..f2baea3 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -53,7 +53,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
-CONFIG_DMA_IP27=y
+CONFIG_DMA_COHERENT=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index c996c3b..1b332e1 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -50,7 +50,7 @@
 static __inline__ void atomic_add(int i, atomic_t * v)
 {
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -62,7 +62,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -95,7 +95,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 static __inline__ void atomic_sub(int i, atomic_t * v)
 {
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -107,7 +107,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -135,12 +135,12 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
  */
 static __inline__ int atomic_add_return(int i, atomic_t * v)
 {
-	unsigned long result;
+	int result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -154,7 +154,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -187,12 +187,12 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 
 static __inline__ int atomic_sub_return(int i, atomic_t * v)
 {
-	unsigned long result;
+	int result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -206,7 +206,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -247,12 +247,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
  */
 static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 {
-	unsigned long result;
+	int result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -270,7 +270,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		int temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -429,7 +429,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 static __inline__ void atomic64_add(long i, atomic64_t * v)
 {
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -441,7 +441,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -474,7 +474,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 static __inline__ void atomic64_sub(long i, atomic64_t * v)
 {
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -486,7 +486,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -514,12 +514,12 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
  */
 static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 {
-	unsigned long result;
+	long result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -533,7 +533,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -566,12 +566,12 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 
 static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 {
-	unsigned long result;
+	long result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -585,7 +585,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -626,12 +626,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
  */
 static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 {
-	unsigned long result;
+	long result;
 
 	smp_llsc_mb();
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
@@ -649,7 +649,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		unsigned long temp;
+		long temp;
 
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h
index b5cf645..3cb50d1 100644
--- a/arch/mips/include/asm/mach-rc32434/gpio.h
+++ b/arch/mips/include/asm/mach-rc32434/gpio.h
@@ -80,11 +80,8 @@ struct rb532_gpio_reg {
 /* Compact Flash GPIO pin */
 #define CF_GPIO_NUM		13
 
-extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
-extern unsigned get_434_reg(unsigned reg_offs);
-extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
-extern unsigned char get_latch_u5(void);
 extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
 extern void rb532_gpio_set_istat(int bit, unsigned gpio);
+extern void rb532_gpio_set_func(unsigned gpio);
 
 #endif /* _RC32434_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h
index 56738d8..023a5b10 100644
--- a/arch/mips/include/asm/mach-rc32434/irq.h
+++ b/arch/mips/include/asm/mach-rc32434/irq.h
@@ -30,4 +30,7 @@
 #define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
 #define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
 
+#define GPIO_MAPPED_IRQ_BASE	GROUP4_IRQ_BASE
+#define GPIO_MAPPED_IRQ_GROUP	4
+
 #endif  /* __ASM_RC32434_IRQ_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
index f25a849..6dc5f8d 100644
--- a/arch/mips/include/asm/mach-rc32434/rb.h
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -83,4 +83,7 @@ struct mpmc_device {
 	void __iomem 	*base;
 };
 
+extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+extern unsigned char get_latch_u5(void);
+
 #endif  /* __ASM_RC32434_RB_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 1f30d16..ce47118 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -105,7 +105,7 @@ struct pt_watch_regs {
 	enum pt_watch_style style;
 	union {
 		struct mips32_watch_regs mips32;
-		struct mips32_watch_regs mips64;
+		struct mips64_watch_regs mips64;
 	};
 };
 
diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h
index a275661..8f77f77 100644
--- a/arch/mips/include/asm/termios.h
+++ b/arch/mips/include/asm/termios.h
@@ -9,6 +9,7 @@
 #ifndef _ASM_TERMIOS_H
 #define _ASM_TERMIOS_H
 
+#include <linux/errno.h>
 #include <asm/termbits.h>
 #include <asm/ioctls.h>
 
@@ -94,38 +95,81 @@ struct termio {
 /*
  * Translate a "termio" structure into a "termios". Ugh.
  */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	get_user((termios)->c_line, &(termio)->c_line); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+	struct termio __user *termio)
+{
+	unsigned short iflag, oflag, cflag, lflag;
+	unsigned int err;
+
+	if (!access_ok(VERIFY_READ, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	err = __get_user(iflag, &termio->c_iflag);
+	termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag;
+	err |=__get_user(oflag, &termio->c_oflag);
+	termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag;
+	err |=__get_user(cflag, &termio->c_cflag);
+	termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag;
+	err |=__get_user(lflag, &termio->c_lflag);
+	termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag;
+	err |=__get_user(termios->c_line, &termio->c_line);
+	if (err)
+		return -EFAULT;
+
+	if (__copy_from_user(termios->c_cc, termio->c_cc, NCC))
+		return -EFAULT;
+
+	return 0;
+}
 
 /*
  * Translate a "termios" structure into a "termio". Ugh.
  */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line, &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+	struct ktermios *termios)
+{
+	int err;
+
+	if (!access_ok(VERIFY_WRITE, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	err = __put_user(termios->c_iflag, &termio->c_iflag);
+	err |= __put_user(termios->c_oflag, &termio->c_oflag);
+	err |= __put_user(termios->c_cflag, &termio->c_cflag);
+	err |= __put_user(termios->c_lflag, &termio->c_lflag);
+	err |= __put_user(termios->c_line, &termio->c_line);
+	if (err)
+		return -EFAULT;
+
+	if (__copy_to_user(termio->c_cc, termios->c_cc, NCC))
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int user_termios_to_kernel_termios(struct ktermios __user *k,
+	struct termios2 *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0;
+}
+
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+	struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0;
+}
+
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+	struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0;
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+	struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0;
+}
 
 #endif /* defined(__KERNEL__) */
 
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
index 88badb4..964ef7e 100644
--- a/arch/mips/include/asm/txx9/tx4939.h
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -541,5 +541,6 @@ void tx4939_irq_init(void);
 int tx4939_irq(void);
 void tx4939_mtd_init(int ch);
 void tx4939_ata_init(void);
+void tx4939_rtc_init(void);
 
 #endif /* __ASM_TXX9_TX4939_H */
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index fb6f731..8882e57 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -458,7 +458,11 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
 #ifdef 	CONFIG_HARDWARE_WATCHPOINTS
-	BUILD_HANDLER watch watch sti silent		/* #23 */
+	/*
+	 * For watch, interrupts will be enabled after the watch
+	 * registers are read.
+	 */
+	BUILD_HANDLER watch watch cli silent		/* #23 */
 #else
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
 #endif
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 5e77a3a..4246131 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -79,7 +79,8 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 
 	euid = current_euid();
 	retval = -EPERM;
-	if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) {
+	if (euid != p->cred->euid && euid != p->cred->uid &&
+	    !capable(CAP_SYS_NICE)) {
 		read_unlock(&tasklist_lock);
 		goto out_unlock;
 	}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index f6083c6..b2d7041 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -944,6 +944,9 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 	force_sig(SIGILL, current);
 }
 
+/*
+ * Called with interrupts disabled.
+ */
 asmlinkage void do_watch(struct pt_regs *regs)
 {
 	u32 cause;
@@ -963,9 +966,12 @@ asmlinkage void do_watch(struct pt_regs *regs)
 	 */
 	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
 		mips_read_watch_registers();
+		local_irq_enable();
 		force_sig(SIGTRAP, current);
-	} else
+	} else {
 		mips_clear_watch_registers();
+		local_irq_enable();
+	}
 }
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
@@ -1582,7 +1588,11 @@ void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 static char panic_null_cerr[] __cpuinitdata =
 	"Trying to set NULL cache error exception handler";
 
-/* Install uncached CPU exception handler */
+/*
+ * Install uncached CPU exception handler.
+ * This is suitable only for the cache error exception which is the only
+ * exception handler that is being run uncached.
+ */
 void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long size)
 {
@@ -1593,7 +1603,7 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long uncached_ebase = TO_UNCAC(ebase);
 #endif
 	if (cpu_has_mips_r2)
-		ebase += (read_c0_ebase() & 0x3ffff000);
+		uncached_ebase += (read_c0_ebase() & 0x3ffff000);
 
 	if (!addr)
 		panic(panic_null_cerr);
diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S
index 736d0fb..68853a0 100644
--- a/arch/mips/lib/memcpy-inatomic.S
+++ b/arch/mips/lib/memcpy-inatomic.S
@@ -21,7 +21,7 @@
  * end of memory on some systems.  It's also a seriously bad idea on non
  * dma-coherent systems.
  */
-#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#ifdef CONFIG_DMA_NONCOHERENT
 #undef CONFIG_CPU_HAS_PREFETCH
 #endif
 #ifdef CONFIG_MIPS_MALTA
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index c06cccf..56a1f85 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -21,7 +21,7 @@
  * end of memory on some systems.  It's also a seriously bad idea on non
  * dma-coherent systems.
  */
-#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#ifdef CONFIG_DMA_NONCOHERENT
 #undef CONFIG_CPU_HAS_PREFETCH
 #endif
 #ifdef CONFIG_MIPS_MALTA
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6e99665..c43f4b2 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -618,15 +618,35 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
-		else
+		else {
+			unsigned long lsize = cpu_scache_line_size();
+			unsigned long almask = ~(lsize - 1);
+
+			/*
+			 * There is no clearly documented alignment requirement
+			 * for the cache instruction on MIPS processors and
+			 * some processors, among them the RM5200 and RM7000
+			 * QED processors will throw an address error for cache
+			 * hit ops with insufficient alignment.  Solved by
+			 * aligning the address to cache line size.
+			 */
+			cache_op(Hit_Writeback_Inv_SD, addr & almask);
+			cache_op(Hit_Writeback_Inv_SD,
+				 (addr + size - 1) & almask);
 			blast_inv_scache_range(addr, addr + size);
+		}
 		return;
 	}
 
 	if (cpu_has_safe_index_cacheops && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
+		unsigned long lsize = cpu_dcache_line_size();
+		unsigned long almask = ~(lsize - 1);
+
 		R4600_HIT_CACHEOP_WAR_IMPL;
+		cache_op(Hit_Writeback_Inv_D, addr & almask);
+		cache_op(Hit_Writeback_Inv_D, (addr + size - 1)  & almask);
 		blast_inv_dcache_range(addr, addr + size);
 	}
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index fa636fc..55767ad 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -97,7 +97,6 @@ good_area:
 			goto bad_area;
 	}
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -167,21 +166,13 @@ no_context:
 	       field,  regs->regs[31]);
 	die("Oops", regs);
 
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
 out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	/*
+	 * We ran out of memory, call the OOM killer, and return the userspace
+	 * (which will retry the fault, or kill us if we got oom-killed).
+	 */
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 1c2821e..71f7d27 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
 
 static int __init rc32434_pci_init(void)
 {
+	void __iomem *io_map_base;
+
 	pr_info("PCI: Initializing PCI\n");
 
 	ioport_resource.start = rc32434_res_pci_io1.start;
@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
 
 	rc32434_pcibridge_init();
 
+	io_map_base = ioremap(rc32434_res_pci_io1.start,
+		rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
+
+	if (!io_map_base)
+		return -ENOMEM;
+
+	rc32434_controller.io_map_base =
+		(unsigned long)io_map_base - rc32434_res_pci_io1.start;
+
 	register_pci_controller(&rc32434_controller);
 	rc32434_sync();
 
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index c1c2918..4a5f05b 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/serial_8250.h>
 
 #include <asm/bootinfo.h>
 
@@ -39,6 +40,29 @@
 #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
 #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
 
+extern unsigned int idt_cpu_freq;
+
+static struct mpmc_device dev3;
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+	writeb(dev3.state, dev3.base);
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+	return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -86,7 +110,7 @@ static struct korina_device korina_dev0_data = {
 static struct platform_device korina_dev0 = {
 	.id = -1,
 	.name = "korina",
-	.dev.platform_data = &korina_dev0_data,
+	.dev.driver_data = &korina_dev0_data,
 	.resource = korina_dev0_res,
 	.num_resources = ARRAY_SIZE(korina_dev0_res),
 };
@@ -214,12 +238,32 @@ static struct platform_device rb532_wdt = {
 	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
 };
 
+static struct plat_serial8250_port rb532_uart_res[] = {
+	{
+		.membase	= (char *)KSEG1ADDR(REGBASE + UART0BASE),
+		.irq		= UART0_IRQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF,
+	},
+	{
+		.flags		= 0,
+	}
+};
+
+static struct platform_device rb532_uart = {
+	.name              = "serial8250",
+	.id                = PLAT8250_DEV_PLATFORM,
+	.dev.platform_data = &rb532_uart_res,
+};
+
 static struct platform_device *rb532_devs[] = {
 	&korina_dev0,
 	&nand_slot0,
 	&cf_slot0,
 	&rb532_led,
 	&rb532_button,
+	&rb532_uart,
 	&rb532_wdt
 };
 
@@ -291,9 +335,20 @@ static int __init plat_setup_devices(void)
 	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
+	/* Read and map device controller 3 */
+	dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
+
+	if (!dev3.base) {
+		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+		return -ENXIO;
+	}
+
 	/* Initialise the NAND device */
 	rb532_nand_setup();
 
+	/* set the uart clock to the current cpu frequency */
+	rb532_uart_res[0].uartclk = idt_cpu_freq;
+
 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }
 
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 0e84c8a..37de05d 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -41,8 +41,6 @@ struct rb532_gpio_chip {
 	void __iomem	 *regbase;
 };
 
-struct mpmc_device dev3;
-
 static struct resource rb532_gpio_reg0_res[] = {
 	{
 		.name 	= "gpio_reg0",
@@ -52,61 +50,6 @@ static struct resource rb532_gpio_reg0_res[] = {
 	}
 };
 
-static struct resource rb532_dev3_ctl_res[] = {
-	{
-		.name	= "dev3_ctl",
-		.start	= REGBASE + DEV3BASE,
-		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
-{
-	unsigned long flags;
-	unsigned data;
-	unsigned i = 0;
-
-	spin_lock_irqsave(&dev3.lock, flags);
-
-	data = readl(IDT434_REG_BASE + reg_offs);
-	for (i = 0; i != len; ++i) {
-		if (val & (1 << i))
-			data |= (1 << (i + bit));
-		else
-			data &= ~(1 << (i + bit));
-	}
-	writel(data, (IDT434_REG_BASE + reg_offs));
-
-	spin_unlock_irqrestore(&dev3.lock, flags);
-}
-EXPORT_SYMBOL(set_434_reg);
-
-unsigned get_434_reg(unsigned reg_offs)
-{
-	return readl(IDT434_REG_BASE + reg_offs);
-}
-EXPORT_SYMBOL(get_434_reg);
-
-void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev3.lock, flags);
-
-	dev3.state = (dev3.state | or_mask) & ~nand_mask;
-	writel(dev3.state, &dev3.base);
-
-	spin_unlock_irqrestore(&dev3.lock, flags);
-}
-EXPORT_SYMBOL(set_latch_u5);
-
-unsigned char get_latch_u5(void)
-{
-	return dev3.state;
-}
-EXPORT_SYMBOL(get_latch_u5);
-
 /* rb532_set_bit - sanely set a bit
  *
  * bitval: new value for the bit
@@ -119,13 +62,11 @@ static inline void rb532_set_bit(unsigned bitval,
 	unsigned long flags;
 	u32 val;
 
-	bitval = !!bitval;              /* map parameter to {0,1} */
-
 	local_irq_save(flags);
 
 	val = readl(ioaddr);
-	val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
-	val |=  (  bitval << offset );   /* set bit if bitval == 1 */
+	val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
+	val |= (!!bitval << offset);   /* set bit if bitval == 1 */
 	writel(val, ioaddr);
 
 	local_irq_restore(flags);
@@ -171,8 +112,8 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 
 	gpch = container_of(chip, struct rb532_gpio_chip, chip);
 
-	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
-		return 1;	/* alternate function, GPIOCFG is ignored */
+	/* disable alternate function in case it's set */
+	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
 
 	rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
 	return 0;
@@ -188,8 +129,8 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip,
 
 	gpch = container_of(chip, struct rb532_gpio_chip, chip);
 
-	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
-		return 1;	/* alternate function, GPIOCFG is ignored */
+	/* disable alternate function in case it's set */
+	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
 
 	/* set the initial output value */
 	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
@@ -233,10 +174,11 @@ EXPORT_SYMBOL(rb532_gpio_set_istat);
 /*
  * Configure GPIO alternate function
  */
-static void rb532_gpio_set_func(int bit, unsigned gpio)
+void rb532_gpio_set_func(unsigned gpio)
 {
-       rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
+       rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
 }
+EXPORT_SYMBOL(rb532_gpio_set_func);
 
 int __init rb532_gpio_init(void)
 {
@@ -253,20 +195,6 @@ int __init rb532_gpio_init(void)
 	/* Register our GPIO chip */
 	gpiochip_add(&rb532_gpio_chip->chip);
 
-	r = rb532_dev3_ctl_res;
-	dev3.base = ioremap_nocache(r->start, r->end - r->start);
-
-	if (!dev3.base) {
-		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
-		return -ENXIO;
-	}
-
-	/* configure CF_GPIO_NUM as CFRDY IRQ source */
-	rb532_gpio_set_func(0, CF_GPIO_NUM);
-	rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
-	rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
-	rb532_gpio_set_istat(0, CF_GPIO_NUM);
-
 	return 0;
 }
 arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
index 549b46d..53eeb5e 100644
--- a/arch/mips/rb532/irq.c
+++ b/arch/mips/rb532/irq.c
@@ -46,6 +46,7 @@
 #include <asm/system.h>
 
 #include <asm/mach-rc32434/irq.h>
+#include <asm/mach-rc32434/gpio.h>
 
 struct intr_group {
 	u32 mask;	/* mask of valid bits in pending/mask registers */
@@ -150,6 +151,9 @@ static void rb532_disable_irq(unsigned int irq_nr)
 		mask |= intr_bit;
 		WRITE_MASK(addr, mask);
 
+		if (group == GPIO_MAPPED_IRQ_GROUP)
+			rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE);
+
 		/*
 		 * if there are no more interrupts enabled in this
 		 * group, disable corresponding IP
@@ -165,12 +169,35 @@ static void rb532_mask_and_ack_irq(unsigned int irq_nr)
 	ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
 }
 
+static int rb532_set_type(unsigned int irq_nr, unsigned type)
+{
+	int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE;
+	int group = irq_to_group(irq_nr);
+
+	if (group != GPIO_MAPPED_IRQ_GROUP)
+		return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		rb532_gpio_set_ilevel(1, gpio);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		rb532_gpio_set_ilevel(0, gpio);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct irq_chip rc32434_irq_type = {
 	.name		= "RB532",
 	.ack		= rb532_disable_irq,
 	.mask		= rb532_disable_irq,
 	.mask_ack	= rb532_mask_and_ack_irq,
 	.unmask		= rb532_enable_irq,
+	.set_type	= rb532_set_type,
 };
 
 void __init arch_init_irq(void)
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
index 3e0d7ec..00ed19f 100644
--- a/arch/mips/rb532/serial.c
+++ b/arch/mips/rb532/serial.c
@@ -36,7 +36,7 @@
 extern unsigned int idt_cpu_freq;
 
 static struct uart_port rb532_uart = {
-	.type = PORT_16550A,
+	.flags = UPF_BOOT_AUTOCONF,
 	.line = 0,
 	.irq = UART0_IRQ,
 	.iotype = UPIO_MEM,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 6c0049a..5544096 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -435,6 +435,28 @@ void __init tx4939_ata_init(void)
 		platform_device_register(&ata1_dev);
 }
 
+void __init tx4939_rtc_init(void)
+{
+	static struct resource res[] = {
+		{
+			.start = TX4939_RTC_REG & 0xfffffffffULL,
+			.end = (TX4939_RTC_REG & 0xfffffffffULL) + 0x100 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = TXX9_IRQ_BASE + TX4939_IR_RTC,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	static struct platform_device rtc_dev = {
+		.name = "tx4939rtc",
+		.id = -1,
+		.num_resources = ARRAY_SIZE(res),
+		.resource = res,
+	};
+
+	platform_device_register(&rtc_dev);
+}
+
 static void __init tx4939_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 98fbd93..656603b 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -336,6 +336,7 @@ static void __init rbtx4939_device_init(void)
 	rbtx4939_led_setup();
 	tx4939_wdt_init();
 	tx4939_ata_init();
+	tx4939_rtc_init();
 }
 
 static void __init rbtx4939_setup(void)
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 99c495a..1239c61 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:12:40 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:41:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -182,9 +187,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-# CONFIG_PPC_BESTCOMM_ATA is not set
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -211,6 +215,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -222,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +275,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -427,6 +437,12 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -514,6 +530,9 @@ CONFIG_LXT_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -539,6 +558,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -588,8 +611,10 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -629,8 +654,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -675,10 +698,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -736,6 +761,7 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -760,18 +786,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -817,6 +842,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -826,7 +855,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -883,10 +912,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -906,6 +932,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1002,6 +1029,7 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1053,6 +1081,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1061,6 +1090,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1069,11 +1100,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1100,11 +1133,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 9796220..b7b8805 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:10:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:41:14 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -72,14 +72,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +121,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +131,6 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,7 +156,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 CONFIG_FREEZER=y
 
 #
@@ -192,7 +196,7 @@ CONFIG_PPC_LITE5200=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +294,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -396,13 +407,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -445,6 +462,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -461,6 +479,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -580,6 +600,9 @@ CONFIG_LXT_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -626,6 +649,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -648,6 +672,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -695,8 +723,10 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -762,8 +792,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -796,10 +824,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -846,9 +876,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -860,7 +894,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -881,6 +914,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -914,10 +948,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -926,6 +957,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -967,6 +999,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1016,6 +1049,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1024,6 +1058,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1032,11 +1068,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1063,11 +1101,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index d081e00..fb10f22 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:11:02 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:42:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -182,9 +187,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-# CONFIG_PPC_BESTCOMM_ATA is not set
+CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -211,6 +216,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -222,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +276,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -336,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -427,6 +438,12 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -447,10 +464,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -492,6 +515,7 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -525,6 +549,9 @@ CONFIG_SMSC_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -548,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -590,8 +621,10 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -629,8 +662,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -659,6 +690,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -678,6 +710,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -721,10 +754,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -835,7 +870,6 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -856,6 +890,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -892,10 +927,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -915,6 +947,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1011,6 +1044,7 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1062,6 +1096,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1070,6 +1105,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1078,11 +1115,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1109,11 +1148,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index b21b8e8..00944c0 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:13:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:41:33 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -72,15 +72,24 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +121,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +132,6 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +139,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,7 +157,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -191,9 +195,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_ATA=m
 CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -212,7 +216,6 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
@@ -222,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -261,6 +267,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -283,6 +290,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -365,6 +375,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -413,9 +424,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -439,6 +448,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -587,6 +602,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -621,6 +639,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -675,7 +697,9 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -740,8 +764,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -774,10 +796,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -837,6 +861,7 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
@@ -864,18 +889,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -921,6 +945,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -983,7 +1011,6 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1004,6 +1031,7 @@ CONFIG_FS_MBCACHE=m
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -1039,10 +1067,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1062,6 +1087,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1141,6 +1167,7 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1173,6 +1200,8 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1180,6 +1209,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 7995457..65237ad 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:09:30 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:42:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -121,7 +129,6 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -129,11 +136,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,7 +154,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -188,9 +192,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-# CONFIG_PPC_BESTCOMM_ATA is not set
+CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_PPC_BESTCOMM_GEN_BD is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -217,6 +221,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +281,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -364,6 +374,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -433,6 +444,12 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -496,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -530,6 +548,9 @@ CONFIG_LXT_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -555,6 +576,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -604,8 +629,10 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -645,8 +672,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -675,6 +700,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -694,6 +720,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -742,10 +769,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -803,6 +832,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -827,18 +857,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -884,6 +913,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -947,7 +980,6 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -968,6 +1000,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1004,10 +1037,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1027,6 +1057,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1123,6 +1154,7 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1174,6 +1206,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1182,6 +1215,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1190,11 +1225,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1221,11 +1258,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 5ff3de2..81afc8b 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Thu Nov 13 02:09:07 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 21:40:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -72,10 +72,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -108,7 +117,6 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,7 +127,6 @@ CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,7 +152,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 CONFIG_FREEZER=y
 
 #
@@ -192,7 +196,7 @@ CONFIG_RTAS_PROC=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +294,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -376,6 +387,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -447,6 +459,12 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -474,13 +492,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +563,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -659,6 +685,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -693,6 +722,10 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -774,9 +807,11 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_RTAS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -844,8 +879,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -874,6 +907,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -894,6 +928,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -953,10 +988,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -1051,7 +1088,7 @@ CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -1093,21 +1130,22 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 # CONFIG_HID_APPLE is not set
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 # CONFIG_HID_CHICONY is not set
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_GYRATION is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1137,6 +1175,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1164,18 +1203,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1222,6 +1260,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1243,7 +1285,6 @@ CONFIG_NEW_LEDS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1264,6 +1305,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1300,10 +1342,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1323,6 +1362,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1403,6 +1443,7 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1454,6 +1495,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1462,6 +1504,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1470,11 +1514,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1501,11 +1547,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index da5a385..19b12d2 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -16,8 +16,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#define DEBUG
-
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
@@ -258,7 +256,8 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 	} else {
 		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
 			 oirq.size, oirq.specifier[0], oirq.specifier[1],
-		    oirq.controller->full_name);
+			 oirq.controller ? oirq.controller->full_name :
+			 "<default>");
 
 		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 					     oirq.size);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index c3f2c21..87ff522 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -20,14 +20,6 @@
 
 
 /* ======================================================================== */
-/* PCI windows config                                                       */
-/* ======================================================================== */
-
-#define MPC52xx_PCI_TARGET_IO	0xf0000000
-#define MPC52xx_PCI_TARGET_MEM	0x00000000
-
-
-/* ======================================================================== */
 /* Structures mapping & Defines for PCI Unit                                */
 /* ======================================================================== */
 
@@ -244,7 +236,7 @@ static struct pci_ops mpc52xx_pci_ops = {
 
 static void __init
 mpc52xx_pci_setup(struct pci_controller *hose,
-                  struct mpc52xx_pci __iomem *pci_regs)
+                  struct mpc52xx_pci __iomem *pci_regs, phys_addr_t pci_phys)
 {
 	struct resource *res;
 	u32 tmp;
@@ -314,10 +306,14 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	/* Set all the IWCR fields at once; they're in the same reg */
 	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
 
-	out_be32(&pci_regs->tbatr0,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
-	out_be32(&pci_regs->tbatr1,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+	/* Map IMMR onto PCI bus */
+	pci_phys &= 0xfffc0000; /* bar0 has only 14 significant bits */
+	out_be32(&pci_regs->tbatr0, MPC52xx_PCI_TBATR_ENABLE | pci_phys);
+	out_be32(&pci_regs->bar0, PCI_BASE_ADDRESS_MEM_PREFETCH | pci_phys);
+
+	/* Map memory onto PCI bus */
+	out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE);
+	out_be32(&pci_regs->bar1, PCI_BASE_ADDRESS_MEM_PREFETCH);
 
 	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
 
@@ -414,7 +410,7 @@ mpc52xx_add_bridge(struct device_node *node)
 
 	/* Finish setting up PCI using values obtained by
 	 * pci_proces_bridge_OF_ranges */
-	mpc52xx_pci_setup(hose, pci_regs);
+	mpc52xx_pci_setup(hose, pci_regs, rsrc.start);
 
 	return 0;
 }
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 7511584..4a58c8c 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -269,9 +269,8 @@ void vesa_store_edid(void)
 	   we genuinely have to assume all registers are destroyed here. */
 
 	asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
-	    : "+a" (ax), "+b" (bx)
-	    :  "c" (cx), "D" (di)
-	    : "esi");
+	    : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
+	    : : "esi", "edx");
 
 	if (ax != 0x004f)
 		return;		/* No EDID */
@@ -285,9 +284,9 @@ void vesa_store_edid(void)
 	dx = 0;			/* EDID block number */
 	di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
 	asm(INT10
-	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info)
-	    : "c" (cx), "D" (di)
-	    : "esi");
+	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
+	      "+c" (cx), "+D" (di)
+	    : : "esi");
 #endif /* CONFIG_FIRMWARE_EDID */
 }
 
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 3d8cedd..00d41ce 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -49,6 +49,7 @@
 #define E820_RESERVED_KERN        128
 
 #ifndef __ASSEMBLY__
+#include <linux/types.h>
 struct e820entry {
 	__u64 addr;	/* start of memory segment */
 	__u64 size;	/* size of memory segment */
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index b95162a..d2e3bf3 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -6,7 +6,7 @@
  *
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/ioctl.h>
 
 /* Architectural interrupt line count. */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 1d6e17c..32c6e17 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -3,8 +3,8 @@
 
 #ifdef __x86_64__
 
+#include <linux/types.h>
 #include <asm/ioctls.h>
-#include <asm/types.h>
 
 /*
  * Machine Check support for x86
@@ -115,8 +115,6 @@ extern int mce_notify_user(void);
 
 #endif /* !CONFIG_X86_32 */
 
-
-
 #ifdef CONFIG_X86_MCE
 extern void mcheck_init(struct cpuinfo_x86 *c);
 #else
@@ -126,5 +124,4 @@ extern void stop_mce(void);
 extern void restart_mce(void);
 
 #endif /* __KERNEL__ */
-
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index 14080d2..a51ada8 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -23,6 +23,7 @@
 #ifndef _ASM_X86_MTRR_H
 #define _ASM_X86_MTRR_H
 
+#include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/errno.h>
 
diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h
index 25f1bb8..8e0f8d1 100644
--- a/arch/x86/include/asm/ptrace-abi.h
+++ b/arch/x86/include/asm/ptrace-abi.h
@@ -83,7 +83,7 @@
 #ifdef CONFIG_X86_PTRACE_BTS
 
 #ifndef __ASSEMBLY__
-#include <asm/types.h>
+#include <linux/types.h>
 
 /* configuration/status structure used in PTRACE_BTS_CONFIG and
    PTRACE_BTS_STATUS commands.
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 0afcb5e..ec66649 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -2,7 +2,7 @@
 #define _ASM_X86_SIGCONTEXT_H
 
 #include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define FP_XSTATE_MAGIC1	0x46505853U
 #define FP_XSTATE_MAGIC2	0x46505845U
diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h
index 6126188..ad1478c 100644
--- a/arch/x86/include/asm/sigcontext32.h
+++ b/arch/x86/include/asm/sigcontext32.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_SIGCONTEXT32_H
 #define _ASM_X86_SIGCONTEXT32_H
 
+#include <linux/types.h>
+
 /* signal context for 32bit programs. */
 
 #define X86_FXSR_MAGIC		0x0000
diff --git a/arch/x86/include/asm/swab.h b/arch/x86/include/asm/swab.h
index 306d417..557cd9f 100644
--- a/arch/x86/include/asm/swab.h
+++ b/arch/x86/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_SWAB_H
 #define _ASM_X86_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 549f2ad..430e5c3 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -30,7 +30,7 @@
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
 	/* Unmask CPUID levels if masked: */
-	if (c->x86 == 6 && c->x86_model >= 15) {
+	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
 		u64 misc_enable;
 
 		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index d259e5d..236a401 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -1594,8 +1594,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		WARN(!kvm_para_available(), KERN_WARNING
-				"WARNING: strange, CPU MTRRs all blank?\n");
+		printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index da91701..169a120 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -15,8 +15,8 @@
  * - buffer allocation (memory accounting)
  *
  *
- * Copyright (C) 2007-2008 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+ * Copyright (C) 2007-2009 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
  */
 
 
@@ -890,7 +890,7 @@ int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value)
 }
 
 static const struct ds_configuration ds_cfg_netburst = {
-	.name = "netburst",
+	.name = "Netburst",
 	.ctl[dsf_bts]		= (1 << 2) | (1 << 3),
 	.ctl[dsf_bts_kernel]	= (1 << 5),
 	.ctl[dsf_bts_user]	= (1 << 6),
@@ -904,7 +904,7 @@ static const struct ds_configuration ds_cfg_netburst = {
 #endif
 };
 static const struct ds_configuration ds_cfg_pentium_m = {
-	.name = "pentium m",
+	.name = "Pentium M",
 	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
 
 	.sizeof_field		= sizeof(long),
@@ -915,8 +915,8 @@ static const struct ds_configuration ds_cfg_pentium_m = {
 	.sizeof_rec[ds_pebs]	= sizeof(long) * 18,
 #endif
 };
-static const struct ds_configuration ds_cfg_core2 = {
-	.name = "core 2",
+static const struct ds_configuration ds_cfg_core2_atom = {
+	.name = "Core 2/Atom",
 	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
 	.ctl[dsf_bts_kernel]	= (1 << 9),
 	.ctl[dsf_bts_user]	= (1 << 10),
@@ -949,19 +949,22 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 	switch (c->x86) {
 	case 0x6:
 		switch (c->x86_model) {
-		case 0 ... 0xC:
-			/* sorry, don't know about them */
-			break;
-		case 0xD:
-		case 0xE: /* Pentium M */
+		case 0x9:
+		case 0xd: /* Pentium M */
 			ds_configure(&ds_cfg_pentium_m);
 			break;
-		default: /* Core2, Atom, ... */
-			ds_configure(&ds_cfg_core2);
+		case 0xf:
+		case 0x17: /* Core2 */
+		case 0x1c: /* Atom */
+			ds_configure(&ds_cfg_core2_atom);
+			break;
+		case 0x1a: /* i7 */
+		default:
+			/* sorry, don't know about them */
 			break;
 		}
 		break;
-	case 0xF:
+	case 0xf:
 		switch (c->x86_model) {
 		case 0x0:
 		case 0x1:
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 4064345..fecbce6 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -572,6 +572,7 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH7_1:
 	case PCI_DEVICE_ID_INTEL_ICH7_30:
 	case PCI_DEVICE_ID_INTEL_ICH7_31:
+	case PCI_DEVICE_ID_INTEL_TGP_LPC:
 	case PCI_DEVICE_ID_INTEL_ESB2_0:
 	case PCI_DEVICE_ID_INTEL_ICH8_0:
 	case PCI_DEVICE_ID_INTEL_ICH8_1:
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 8eba4e4..f7dae57 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -302,7 +302,7 @@ static void bio_end_empty_barrier(struct bio *bio, int err)
  * Description:
  *    Issue a flush for the block device in question. Caller can supply
  *    room for storing the error offset in case of a flush error, if they
- *    wish to.  Caller must run wait_for_completion() on its own.
+ *    wish to.
  */
 int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
 {
diff --git a/block/blk-core.c b/block/blk-core.c
index a824e49..29bcfac 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -64,11 +64,12 @@ static struct workqueue_struct *kblockd_workqueue;
 
 static void drive_stat_acct(struct request *rq, int new_io)
 {
+	struct gendisk *disk = rq->rq_disk;
 	struct hd_struct *part;
 	int rw = rq_data_dir(rq);
 	int cpu;
 
-	if (!blk_fs_request(rq) || !rq->rq_disk)
+	if (!blk_fs_request(rq) || !disk || !blk_do_io_stat(disk->queue))
 		return;
 
 	cpu = part_stat_lock();
@@ -599,8 +600,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
 	q->unplug_fn		= generic_unplug_device;
-	q->queue_flags		= (1 << QUEUE_FLAG_CLUSTER |
-				   1 << QUEUE_FLAG_STACKABLE);
+	q->queue_flags		= QUEUE_FLAG_DEFAULT;
 	q->queue_lock		= lock;
 
 	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
@@ -1125,6 +1125,8 @@ void init_request_from_bio(struct request *req, struct bio *bio)
 
 	if (bio_sync(bio))
 		req->cmd_flags |= REQ_RW_SYNC;
+	if (bio_unplug(bio))
+		req->cmd_flags |= REQ_UNPLUG;
 	if (bio_rw_meta(bio))
 		req->cmd_flags |= REQ_RW_META;
 
@@ -1141,6 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	int el_ret, nr_sectors;
 	const unsigned short prio = bio_prio(bio);
 	const int sync = bio_sync(bio);
+	const int unplug = bio_unplug(bio);
 	int rw_flags;
 
 	nr_sectors = bio_sectors(bio);
@@ -1244,7 +1247,7 @@ get_rq:
 		blk_plug_device(q);
 	add_request(q, req);
 out:
-	if (sync || blk_queue_nonrot(q))
+	if (unplug || blk_queue_nonrot(q))
 		__generic_unplug_device(q);
 	spin_unlock_irq(q->queue_lock);
 	return 0;
@@ -1448,6 +1451,11 @@ static inline void __generic_make_request(struct bio *bio)
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
+		if (bio_barrier(bio) && bio_has_data(bio) &&
+		    (q->next_ordered == QUEUE_ORDERED_NONE)) {
+			err = -EOPNOTSUPP;
+			goto end_io;
+		}
 
 		ret = q->make_request_fn(q, bio);
 	} while (ret);
@@ -1655,6 +1663,55 @@ void blkdev_dequeue_request(struct request *req)
 }
 EXPORT_SYMBOL(blkdev_dequeue_request);
 
+static void blk_account_io_completion(struct request *req, unsigned int bytes)
+{
+	struct gendisk *disk = req->rq_disk;
+
+	if (!disk || !blk_do_io_stat(disk->queue))
+		return;
+
+	if (blk_fs_request(req)) {
+		const int rw = rq_data_dir(req);
+		struct hd_struct *part;
+		int cpu;
+
+		cpu = part_stat_lock();
+		part = disk_map_sector_rcu(req->rq_disk, req->sector);
+		part_stat_add(cpu, part, sectors[rw], bytes >> 9);
+		part_stat_unlock();
+	}
+}
+
+static void blk_account_io_done(struct request *req)
+{
+	struct gendisk *disk = req->rq_disk;
+
+	if (!disk || !blk_do_io_stat(disk->queue))
+		return;
+
+	/*
+	 * Account IO completion.  bar_rq isn't accounted as a normal
+	 * IO on queueing nor completion.  Accounting the containing
+	 * request is enough.
+	 */
+	if (blk_fs_request(req) && req != &req->q->bar_rq) {
+		unsigned long duration = jiffies - req->start_time;
+		const int rw = rq_data_dir(req);
+		struct hd_struct *part;
+		int cpu;
+
+		cpu = part_stat_lock();
+		part = disk_map_sector_rcu(disk, req->sector);
+
+		part_stat_inc(cpu, part, ios[rw]);
+		part_stat_add(cpu, part, ticks[rw], duration);
+		part_round_stats(cpu, part);
+		part_dec_in_flight(part);
+
+		part_stat_unlock();
+	}
+}
+
 /**
  * __end_that_request_first - end I/O on a request
  * @req:      the request being processed
@@ -1690,16 +1747,7 @@ static int __end_that_request_first(struct request *req, int error,
 				(unsigned long long)req->sector);
 	}
 
-	if (blk_fs_request(req) && req->rq_disk) {
-		const int rw = rq_data_dir(req);
-		struct hd_struct *part;
-		int cpu;
-
-		cpu = part_stat_lock();
-		part = disk_map_sector_rcu(req->rq_disk, req->sector);
-		part_stat_add(cpu, part, sectors[rw], nr_bytes >> 9);
-		part_stat_unlock();
-	}
+	blk_account_io_completion(req, nr_bytes);
 
 	total_bytes = bio_nbytes = 0;
 	while ((bio = req->bio) != NULL) {
@@ -1779,8 +1827,6 @@ static int __end_that_request_first(struct request *req, int error,
  */
 static void end_that_request_last(struct request *req, int error)
 {
-	struct gendisk *disk = req->rq_disk;
-
 	if (blk_rq_tagged(req))
 		blk_queue_end_tag(req->q, req);
 
@@ -1792,27 +1838,7 @@ static void end_that_request_last(struct request *req, int error)
 
 	blk_delete_timer(req);
 
-	/*
-	 * Account IO completion.  bar_rq isn't accounted as a normal
-	 * IO on queueing nor completion.  Accounting the containing
-	 * request is enough.
-	 */
-	if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
-		unsigned long duration = jiffies - req->start_time;
-		const int rw = rq_data_dir(req);
-		struct hd_struct *part;
-		int cpu;
-
-		cpu = part_stat_lock();
-		part = disk_map_sector_rcu(disk, req->sector);
-
-		part_stat_inc(cpu, part, ios[rw]);
-		part_stat_add(cpu, part, ticks[rw], duration);
-		part_round_stats(cpu, part);
-		part_dec_in_flight(part);
-
-		part_stat_unlock();
-	}
+	blk_account_io_done(req);
 
 	if (req->end_io)
 		req->end_io(req, error);
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 61a8e2f..91fa8e0 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -309,24 +309,24 @@ static struct kobj_type integrity_ktype = {
 /**
  * blk_integrity_register - Register a gendisk as being integrity-capable
  * @disk:	struct gendisk pointer to make integrity-aware
- * @template:	integrity profile
+ * @template:	optional integrity profile to register
  *
  * Description: When a device needs to advertise itself as being able
  * to send/receive integrity metadata it must use this function to
  * register the capability with the block layer.  The template is a
  * blk_integrity struct with values appropriate for the underlying
- * hardware.  See Documentation/block/data-integrity.txt.
+ * hardware.  If template is NULL the new profile is allocated but
+ * not filled out. See Documentation/block/data-integrity.txt.
  */
 int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 {
 	struct blk_integrity *bi;
 
 	BUG_ON(disk == NULL);
-	BUG_ON(template == NULL);
 
 	if (disk->integrity == NULL) {
 		bi = kmem_cache_alloc(integrity_cachep,
-						GFP_KERNEL | __GFP_ZERO);
+				      GFP_KERNEL | __GFP_ZERO);
 		if (!bi)
 			return -1;
 
@@ -346,13 +346,16 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 		bi = disk->integrity;
 
 	/* Use the provided profile as template */
-	bi->name = template->name;
-	bi->generate_fn = template->generate_fn;
-	bi->verify_fn = template->verify_fn;
-	bi->tuple_size = template->tuple_size;
-	bi->set_tag_fn = template->set_tag_fn;
-	bi->get_tag_fn = template->get_tag_fn;
-	bi->tag_size = template->tag_size;
+	if (template != NULL) {
+		bi->name = template->name;
+		bi->generate_fn = template->generate_fn;
+		bi->verify_fn = template->verify_fn;
+		bi->tuple_size = template->tuple_size;
+		bi->set_tag_fn = template->set_tag_fn;
+		bi->get_tag_fn = template->get_tag_fn;
+		bi->tag_size = template->tag_size;
+	} else
+		bi->name = "unsupported";
 
 	return 0;
 }
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index a29cb78..e29ddfc 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -130,6 +130,27 @@ static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page)
 	return queue_var_show(max_hw_sectors_kb, (page));
 }
 
+static ssize_t queue_nonrot_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(!blk_queue_nonrot(q), page);
+}
+
+static ssize_t queue_nonrot_store(struct request_queue *q, const char *page,
+				  size_t count)
+{
+	unsigned long nm;
+	ssize_t ret = queue_var_store(&nm, page, count);
+
+	spin_lock_irq(q->queue_lock);
+	if (nm)
+		queue_flag_clear(QUEUE_FLAG_NONROT, q);
+	else
+		queue_flag_set(QUEUE_FLAG_NONROT, q);
+	spin_unlock_irq(q->queue_lock);
+
+	return ret;
+}
+
 static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
 {
 	return queue_var_show(blk_queue_nomerges(q), page);
@@ -146,8 +167,8 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
 		queue_flag_set(QUEUE_FLAG_NOMERGES, q);
 	else
 		queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
-
 	spin_unlock_irq(q->queue_lock);
+
 	return ret;
 }
 
@@ -176,6 +197,27 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
 	return ret;
 }
 
+static ssize_t queue_iostats_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(blk_queue_io_stat(q), page);
+}
+
+static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
+				   size_t count)
+{
+	unsigned long stats;
+	ssize_t ret = queue_var_store(&stats, page, count);
+
+	spin_lock_irq(q->queue_lock);
+	if (stats)
+		queue_flag_set(QUEUE_FLAG_IO_STAT, q);
+	else
+		queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
+	spin_unlock_irq(q->queue_lock);
+
+	return ret;
+}
+
 static struct queue_sysfs_entry queue_requests_entry = {
 	.attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
 	.show = queue_requests_show,
@@ -210,6 +252,12 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = {
 	.show = queue_hw_sector_size_show,
 };
 
+static struct queue_sysfs_entry queue_nonrot_entry = {
+	.attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
+	.show = queue_nonrot_show,
+	.store = queue_nonrot_store,
+};
+
 static struct queue_sysfs_entry queue_nomerges_entry = {
 	.attr = {.name = "nomerges", .mode = S_IRUGO | S_IWUSR },
 	.show = queue_nomerges_show,
@@ -222,6 +270,12 @@ static struct queue_sysfs_entry queue_rq_affinity_entry = {
 	.store = queue_rq_affinity_store,
 };
 
+static struct queue_sysfs_entry queue_iostats_entry = {
+	.attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR },
+	.show = queue_iostats_show,
+	.store = queue_iostats_store,
+};
+
 static struct attribute *default_attrs[] = {
 	&queue_requests_entry.attr,
 	&queue_ra_entry.attr,
@@ -229,8 +283,10 @@ static struct attribute *default_attrs[] = {
 	&queue_max_sectors_entry.attr,
 	&queue_iosched_entry.attr,
 	&queue_hw_sector_size_entry.attr,
+	&queue_nonrot_entry.attr,
 	&queue_nomerges_entry.attr,
 	&queue_rq_affinity_entry.attr,
+	&queue_iostats_entry.attr,
 	NULL,
 };
 
diff --git a/block/blk.h b/block/blk.h
index 6e1ed40..0dce92c 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -108,4 +108,12 @@ static inline int blk_cpu_to_group(int cpu)
 #endif
 }
 
+static inline int blk_do_io_stat(struct request_queue *q)
+{
+	if (q)
+		return blk_queue_io_stat(q);
+
+	return 0;
+}
+
 #endif
diff --git a/block/blktrace.c b/block/blktrace.c
index b0a2cae..39cc3bf 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -187,59 +187,12 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
 
 static struct dentry *blk_tree_root;
 static DEFINE_MUTEX(blk_tree_mutex);
-static unsigned int root_users;
-
-static inline void blk_remove_root(void)
-{
-	if (blk_tree_root) {
-		debugfs_remove(blk_tree_root);
-		blk_tree_root = NULL;
-	}
-}
-
-static void blk_remove_tree(struct dentry *dir)
-{
-	mutex_lock(&blk_tree_mutex);
-	debugfs_remove(dir);
-	if (--root_users == 0)
-		blk_remove_root();
-	mutex_unlock(&blk_tree_mutex);
-}
-
-static struct dentry *blk_create_tree(const char *blk_name)
-{
-	struct dentry *dir = NULL;
-	int created = 0;
-
-	mutex_lock(&blk_tree_mutex);
-
-	if (!blk_tree_root) {
-		blk_tree_root = debugfs_create_dir("block", NULL);
-		if (!blk_tree_root)
-			goto err;
-		created = 1;
-	}
-
-	dir = debugfs_create_dir(blk_name, blk_tree_root);
-	if (dir)
-		root_users++;
-	else {
-		/* Delete root only if we created it */
-		if (created)
-			blk_remove_root();
-	}
-
-err:
-	mutex_unlock(&blk_tree_mutex);
-	return dir;
-}
 
 static void blk_trace_cleanup(struct blk_trace *bt)
 {
-	relay_close(bt->rchan);
 	debugfs_remove(bt->msg_file);
 	debugfs_remove(bt->dropped_file);
-	blk_remove_tree(bt->dir);
+	relay_close(bt->rchan);
 	free_percpu(bt->sequence);
 	free_percpu(bt->msg_data);
 	kfree(bt);
@@ -346,7 +299,18 @@ static int blk_subbuf_start_callback(struct rchan_buf *buf, void *subbuf,
 
 static int blk_remove_buf_file_callback(struct dentry *dentry)
 {
+	struct dentry *parent = dentry->d_parent;
 	debugfs_remove(dentry);
+
+	/*
+	* this will fail for all but the last file, but that is ok. what we
+	* care about is the top level buts->name directory going away, when
+	* the last trace file is gone. Then we don't have to rmdir() that
+	* manually on trace stop, so it nicely solves the issue with
+	* force killing of running traces.
+	*/
+
+	debugfs_remove(parent);
 	return 0;
 }
 
@@ -404,7 +368,15 @@ int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 		goto err;
 
 	ret = -ENOENT;
-	dir = blk_create_tree(buts->name);
+
+	if (!blk_tree_root) {
+		blk_tree_root = debugfs_create_dir("block", NULL);
+		if (!blk_tree_root)
+			return -ENOMEM;
+	}
+
+	dir = debugfs_create_dir(buts->name, blk_tree_root);
+
 	if (!dir)
 		goto err;
 
@@ -458,8 +430,6 @@ probe_err:
 	atomic_dec(&blk_probes_ref);
 	mutex_unlock(&blk_probe_mutex);
 err:
-	if (dir)
-		blk_remove_tree(dir);
 	if (bt) {
 		if (bt->msg_file)
 			debugfs_remove(bt->msg_file);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index e8525fa..664ebfd 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -84,6 +84,11 @@ struct cfq_data {
 	 */
 	struct cfq_rb_root service_tree;
 	unsigned int busy_queues;
+	/*
+	 * Used to track any pending rt requests so we can pre-empt current
+	 * non-RT cfqq in service when this value is non-zero.
+	 */
+	unsigned int busy_rt_queues;
 
 	int rq_in_driver;
 	int sync_flight;
@@ -562,6 +567,8 @@ static void cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 	BUG_ON(cfq_cfqq_on_rr(cfqq));
 	cfq_mark_cfqq_on_rr(cfqq);
 	cfqd->busy_queues++;
+	if (cfq_class_rt(cfqq))
+		cfqd->busy_rt_queues++;
 
 	cfq_resort_rr_list(cfqd, cfqq);
 }
@@ -581,6 +588,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 
 	BUG_ON(!cfqd->busy_queues);
 	cfqd->busy_queues--;
+	if (cfq_class_rt(cfqq))
+		cfqd->busy_rt_queues--;
 }
 
 /*
@@ -1005,6 +1014,20 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 		goto expire;
 
 	/*
+	 * If we have a RT cfqq waiting, then we pre-empt the current non-rt
+	 * cfqq.
+	 */
+	if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) {
+		/*
+		 * We simulate this as cfqq timed out so that it gets to bank
+		 * the remaining of its time slice.
+		 */
+		cfq_log_cfqq(cfqd, cfqq, "preempt");
+		cfq_slice_expired(cfqd, 1);
+		goto new_queue;
+	}
+
+	/*
 	 * The active queue has requests and isn't expired, allow it to
 	 * dispatch.
 	 */
@@ -1067,6 +1090,13 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		if (RB_EMPTY_ROOT(&cfqq->sort_list))
 			break;
 
+		/*
+		 * If there is a non-empty RT cfqq waiting for current
+		 * cfqq's timeslice to complete, pre-empt this cfqq
+		 */
+		if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues)
+			break;
+
 	} while (dispatched < max_dispatch);
 
 	/*
@@ -1801,6 +1831,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
 	if (rq_is_meta(rq) && !cfqq->meta_pending)
 		return 1;
 
+	/*
+	 * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
+	 */
+	if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq))
+		return 1;
+
 	if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq))
 		return 0;
 
@@ -1870,7 +1906,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		/*
 		 * not the active queue - expire current slice if it is
 		 * idle and has expired it's mean thinktime or this new queue
-		 * has some old slice time left and is of higher priority
+		 * has some old slice time left and is of higher priority or
+		 * this new queue is RT and the current one is BE
 		 */
 		cfq_preempt_queue(cfqd, cfqq);
 		cfq_mark_cfqq_must_dispatch(cfqq);
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index f29fbe9..cb8ca56 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
 
 	/* Allocate a new buffer before freeing the old one ... */
 	multiplier = use_unicode ? 3 : 1;  /* chars can take up to 3 bytes */
-	bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL);
+	bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL);
 	if (!bp) {
 		printk(KERN_WARNING "selection: kmalloc() failed\n");
 		clear_selection();
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 9da5814..6915fb8 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
 	obj = kcalloc(1, sizeof(*obj), GFP_KERNEL);
 
 	obj->dev = dev;
-	obj->filp = shmem_file_setup("drm mm object", size, 0);
+	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
 	if (IS_ERR(obj->filp)) {
 		kfree(obj);
 		return NULL;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b1c6f68..3dad229 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -465,6 +465,16 @@ config BLK_DEV_CS5535
 
 	  It is safe to say Y to this question.
 
+config BLK_DEV_CS5536
+	tristate "CS5536 chipset support"
+	depends on X86_32
+	select BLK_DEV_IDEDMA_PCI
+	help
+	  This option enables support for the AMD CS5536
+	  companion chip used with the Geode LX processor family.
+
+	  If unsure, say N.
+
 config BLK_DEV_HPT366
 	tristate "HPT36X/37X chipset support"
 	select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index c2b9c93..d0e3d7d 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
 obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
 obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
 obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
+obj-$(CONFIG_BLK_DEV_CS5536)		+= cs5536.o
 obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
 obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
new file mode 100644
index 0000000..7a62db7
--- /dev/null
+++ b/drivers/ide/cs5536.c
@@ -0,0 +1,308 @@
+/*
+ * CS5536 PATA support
+ * (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ * (C) 2009 Bartlomiej Zolnierkiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Documentation:
+ *	Available from AMD web site.
+ *
+ * The IDE timing registers for the CS5536 live in the Geode Machine
+ * Specific Register file and not PCI config space.  Most BIOSes
+ * virtualize the PCI registers so the chip looks like a standard IDE
+ * controller.  Unfortunately not all implementations get this right.
+ * In particular some have problems with unaligned accesses to the
+ * virtualized PCI registers.  This driver always does full dword
+ * writes to work around the issue.  Also, in case of a bad BIOS this
+ * driver can be loaded with the "msr=1" parameter which forces using
+ * the Machine Specific Registers to configure the device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <asm/msr.h>
+
+#define DRV_NAME	"cs5536"
+
+enum {
+	MSR_IDE_CFG		= 0x51300010,
+	PCI_IDE_CFG		= 0x40,
+
+	CFG			= 0,
+	DTC			= 2,
+	CAST			= 3,
+	ETC			= 4,
+
+	IDE_CFG_CHANEN		= (1 << 1),
+	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
+
+	IDE_D0_SHIFT		= 24,
+	IDE_D1_SHIFT		= 16,
+	IDE_DRV_MASK		= 0xff,
+
+	IDE_CAST_D0_SHIFT	= 6,
+	IDE_CAST_D1_SHIFT	= 4,
+	IDE_CAST_DRV_MASK	= 0x3,
+
+	IDE_CAST_CMD_SHIFT	= 24,
+	IDE_CAST_CMD_MASK	= 0xff,
+
+	IDE_ETC_UDMA_MASK	= 0xc0,
+};
+
+static int use_msr;
+
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+{
+	if (unlikely(use_msr)) {
+		u32 dummy;
+
+		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+		return 0;
+	}
+
+	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+{
+	if (unlikely(use_msr)) {
+		wrmsr(MSR_IDE_CFG + reg, val, 0);
+		return 0;
+	}
+
+	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
+{
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 dtc;
+
+	cs5536_read(pdev, DTC, &dtc);
+	dtc &= ~(IDE_DRV_MASK << dshift);
+	dtc |= tim << dshift;
+	cs5536_write(pdev, DTC, dtc);
+}
+
+/**
+ *	cs5536_cable_detect	-	detect cable type
+ *	@hwif: Port to detect on
+ *
+ *	Perform cable detection for ATA66 capable cable.
+ *
+ *	Returns a cable type.
+ */
+
+static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	u32 cfg;
+
+	cs5536_read(pdev, CFG, &cfg);
+
+	if (cfg & IDE_CFG_CABLE)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+/**
+ *	cs5536_set_pio_mode		-	PIO timing setup
+ *	@drive: ATA device
+ *	@pio: PIO mode number
+ */
+
+static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	static const u8 drv_timings[5] = {
+		0x98, 0x55, 0x32, 0x21, 0x20,
+	};
+
+	static const u8 addr_timings[5] = {
+		0x2, 0x1, 0x0, 0x0, 0x0,
+	};
+
+	static const u8 cmd_timings[5] = {
+		0x99, 0x92, 0x90, 0x22, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
+	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	u32 cast;
+	u8 cmd_pio = pio;
+
+	if (pair)
+		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+
+	drive->drive_data &= (IDE_DRV_MASK << 8);
+	drive->drive_data |= drv_timings[pio];
+
+	cs5536_program_dtc(drive, drv_timings[pio]);
+
+	cs5536_read(pdev, CAST, &cast);
+
+	cast &= ~(IDE_CAST_DRV_MASK << cshift);
+	cast |= addr_timings[pio] << cshift;
+
+	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+	cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
+
+	cs5536_write(pdev, CAST, cast);
+}
+
+/**
+ *	cs5536_set_dma_mode		-	DMA timing setup
+ *	@drive: ATA device
+ *	@mode: DMA mode
+ */
+
+static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+	static const u8 udma_timings[6] = {
+		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+	};
+
+	static const u8 mwdma_timings[3] = {
+		0x67, 0x21, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 etc;
+
+	cs5536_read(pdev, ETC, &etc);
+
+	if (mode >= XFER_UDMA_0) {
+		etc &= ~(IDE_DRV_MASK << dshift);
+		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+	} else { /* MWDMA */
+		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+		drive->drive_data &= IDE_DRV_MASK;
+		drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+	}
+
+	cs5536_write(pdev, ETC, etc);
+}
+
+static void cs5536_dma_start(ide_drive_t *drive)
+{
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data >> 8);
+
+	ide_dma_start(drive);
+}
+
+static int cs5536_dma_end(ide_drive_t *drive)
+{
+	int ret = ide_dma_end(drive);
+
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+
+	return ret;
+}
+
+static const struct ide_port_ops cs5536_port_ops = {
+	.set_pio_mode		= cs5536_set_pio_mode,
+	.set_dma_mode		= cs5536_set_dma_mode,
+	.cable_detect		= cs5536_cable_detect,
+};
+
+static const struct ide_dma_ops cs5536_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ide_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= cs5536_dma_start,
+	.dma_end		= cs5536_dma_end,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+static const struct ide_port_info cs5536_info = {
+	.name		= DRV_NAME,
+	.port_ops	= &cs5536_port_ops,
+	.dma_ops	= &cs5536_dma_ops,
+	.host_flags	= IDE_HFLAG_SINGLE,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
+};
+
+/**
+ *	cs5536_init_one
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ */
+
+static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u32 cfg;
+
+	if (use_msr)
+		printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
+
+	cs5536_read(dev, CFG, &cfg);
+
+	if ((cfg & IDE_CFG_CHANEN) == 0) {
+		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+		return -ENODEV;
+	}
+
+	return ide_pci_init_one(dev, &cs5536_info, NULL);
+}
+
+static const struct pci_device_id cs5536_pci_tbl[] = {
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
+	{ },
+};
+
+static struct pci_driver cs5536_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= cs5536_pci_tbl,
+	.probe		= cs5536_init_one,
+	.remove		= ide_pci_remove,
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init cs5536_init(void)
+{
+	return pci_register_driver(&cs5536_pci_driver);
+}
+
+static void __exit cs5536_exit(void)
+{
+	pci_unregister_driver(&cs5536_pci_driver);
+}
+
+MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
+
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+
+module_init(cs5536_init);
+module_exit(cs5536_exit);
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 97a35c6..415d7e2 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ret = ide_host_register(host, NULL, hws);
+	ret = ide_host_register(host, &d, hws);
 	if (ret)
 		goto err_free;
 
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index d8f295b..ec7d07f 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
 	port = hwif->channel ? drive->dn - 2: drive->dn;
 
 	DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
-		 hwif->name, dev->bus_id, port, hwif->channel);
+		 hwif->name, dev_name(dev), port, hwif->channel);
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
 		DEBPRINT("%s drive %d:%d not present\n",
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index cae6937..0bfeb0c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		if (blk_fs_request(rq)) {
 			ide_end_request(drive, 1, rq->nr_sectors);
 			return ide_stopped;
+		} else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) {
+			ide_end_request(drive, 1, 1);
+			return ide_stopped;
 		}
 		goto end_request;
 	}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index cc16331..9ee51ad 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 
-	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
-		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
-	} else {
+	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
 		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
 		hwif->sg_nents = 1;
+	} else if (!rq->bio) {
+		sg_init_one(sg, rq->data, rq->data_len);
+		hwif->sg_nents = 1;
+	} else {
+		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 	}
 }
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0db1ed9..ce0818a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1467,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 }
 EXPORT_SYMBOL_GPL(ide_host_alloc);
 
+static void ide_port_free(ide_hwif_t *hwif)
+{
+	ide_port_free_devices(hwif);
+	ide_free_port_slot(hwif->index);
+	kfree(hwif);
+}
+
+static void ide_disable_port(ide_hwif_t *hwif)
+{
+	struct ide_host *host = hwif->host;
+	int i;
+
+	printk(KERN_INFO "%s: disabling port\n", hwif->name);
+
+	for (i = 0; i < MAX_HOST_PORTS; i++) {
+		if (host->ports[i] == hwif) {
+			host->ports[i] = NULL;
+			host->n_ports--;
+		}
+	}
+
+	ide_port_free(hwif);
+}
+
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		      hw_regs_t **hws)
 {
@@ -1507,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			hwif->present = 1;
 
 		if (hwif->chipset != ide_4drives || !hwif->mate ||
-		    !hwif->mate->present)
-			ide_register_port(hwif);
+		    !hwif->mate->present) {
+			if (ide_register_port(hwif)) {
+				ide_disable_port(hwif);
+				continue;
+			}
+		}
 
 		if (hwif->present)
 			ide_port_tune_devices(hwif);
@@ -1521,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (hwif_init(hwif) == 0) {
 			printk(KERN_INFO "%s: failed to initialize IDE "
 					 "interface\n", hwif->name);
-			hwif->present = 0;
+			device_unregister(&hwif->gendev);
+			ide_disable_port(hwif);
 			continue;
 		}
 
@@ -1660,12 +1689,8 @@ void ide_host_free(struct ide_host *host)
 	int i;
 
 	ide_host_for_each_port(i, hwif, host) {
-		if (hwif == NULL)
-			continue;
-
-		ide_port_free_devices(hwif);
-		ide_free_port_slot(hwif->index);
-		kfree(hwif);
+		if (hwif)
+			ide_port_free(hwif);
 	}
 
 	kfree(host);
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 882f6f0..40b0812 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 				bcount = cur_len;
 			/*
 			 * This workaround for zero count seems required.
-			 * (standard ide_build_dmatable do it too)
+			 * (standard ide_build_dmatable does it too)
 			 */
-			if ((bcount & 0xffff) == 0x0000)
+			if (bcount == 0x10000)
 				bcount = 0x8000;
 			*table++ = bcount & 0xffff;
 			*table++ = cur_addr;
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 703c3ee..6092fe3 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
 #endif
 
+#ifdef CONFIG_AMIGAONE
+	if (machine_is(amigaone))
+		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
 	d.udma_mask = via_config->udma_mask;
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 6098b62..47fee05 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
 		vv->vflip = c->value;
 		break;
 	default: {
+		mutex_unlock(&dev->lock);
 		return -EINVAL;
 	}
 	}
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
index 64379f2..3ec2894 100644
--- a/drivers/media/common/tuners/mxl5007t.c
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
 {
 	struct mxl5007t_state *state = fe->tuner_priv;
 	int rf_locked, ref_locked;
-	s32 rf_input_level;
+	s32 rf_input_level = 0;
 	int ret;
 
 	if (fe->ops.i2c_gate_ctrl)
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 98ee167..7e3aeaa 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -93,6 +93,9 @@ struct dvb_ca_slot {
 	/* current state of the CAM */
 	int slot_state;
 
+	/* mutex used for serializing access to one CI slot */
+	struct mutex slot_lock;
+
 	/* Number of CAMCHANGES that have occurred since last processing */
 	atomic_t camchange_count;
 
@@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b
 	dprintk("%s\n", __func__);
 
 
-	// sanity check
+	/* sanity check */
 	if (bytes_write > ca->slot_info[slot].link_buf_size)
 		return -EINVAL;
 
-	/* check if interface is actually waiting for us to read from it, or if a read is in progress */
+	/* it is possible we are dealing with a single buffer implementation,
+	   thus if there is data available for read or if there is even a read
+	   already in progress, we do nothing but awake the kernel thread to
+	   process the data if necessary. */
 	if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
 		goto exitnowrite;
 	if (status & (STATUSREG_DA | STATUSREG_RE)) {
+		if (status & STATUSREG_DA)
+			dvb_ca_en50221_thread_wakeup(ca);
+
 		status = -EAGAIN;
 		goto exitnowrite;
 	}
@@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data)
 		/* go through all the slots processing them */
 		for (slot = 0; slot < ca->slot_count; slot++) {
 
+			mutex_lock(&ca->slot_info[slot].slot_lock);
+
 			// check the cam status + deal with CAMCHANGEs
 			while (dvb_ca_en50221_check_camstatus(ca, slot)) {
 				/* clear down an old CI slot if necessary */
@@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data)
 
 			case DVB_CA_SLOTSTATE_RUNNING:
 				if (!ca->open)
-					continue;
+					break;
 
 				// poll slots for data
 				pktcount = 0;
@@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data)
 				}
 				break;
 			}
+
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 		}
 	}
 
@@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
 	switch (cmd) {
 	case CA_RESET:
 		for (slot = 0; slot < ca->slot_count; slot++) {
+			mutex_lock(&ca->slot_info[slot].slot_lock);
 			if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
 				dvb_ca_en50221_slot_shutdown(ca, slot);
 				if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
@@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
 								     slot,
 								     DVB_CA_EN50221_CAMCHANGE_INSERTED);
 			}
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 		}
 		ca->next_read_slot = 0;
 		dvb_ca_en50221_thread_wakeup(ca);
@@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 				goto exit;
 			}
 
+			mutex_lock(&ca->slot_info[slot].slot_lock);
 			status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
+			mutex_unlock(&ca->slot_info[slot].slot_lock);
 			if (status == (fraglen + 2)) {
 				written = 1;
 				break;
@@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 		ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
 		atomic_set(&ca->slot_info[i].camchange_count, 0);
 		ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		mutex_init(&ca->slot_info[i].slot_lock);
 	}
 
 	if (signal_pending(current)) {
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
index 8467e63..7df2e14 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h
@@ -45,8 +45,10 @@ struct dvb_ca_en50221 {
 	/* the module owning this structure */
 	struct module* owner;
 
-	/* NOTE: the read_*, write_* and poll_slot_status functions must use locks as
-	 * they may be called from several threads at once */
+	/* NOTE: the read_*, write_* and poll_slot_status functions will be
+	 * called for different slots concurrently and need to use locks where
+	 * and if appropriate. There will be no concurrent access to one slot.
+	 */
 
 	/* functions for accessing attribute memory on the CAM */
 	int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address);
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
index b1a9c4c..199ece0 100644
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ b/drivers/media/dvb/dvb-usb/af9005-fe.c
@@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe,
 				   u16 * abort_count)
 {
 	u32 loc_cw_count = 0, loc_err_count;
-	u16 loc_abort_count;
+	u16 loc_abort_count = 0;
 	int ret;
 
 	ret =
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index e1e9aa5..6a97a40 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev)
 
 	/* IR remote controller */
 	req.addr = AF9015_EEPROM_IR_MODE;
-	ret = af9015_rw_udev(udev, &req);
+	/* first message will timeout often due to possible hw bug */
+	for (i = 0; i < 4; i++) {
+		ret = af9015_rw_udev(udev, &req);
+		if (!ret)
+			break;
+	}
 	if (ret)
 		goto error;
 	deb_info("%s: IR mode:%d\n", __func__, val);
@@ -835,18 +840,19 @@ static int af9015_read_config(struct usb_device *udev)
 	if (!dvb_usb_af9015_dual_mode)
 		af9015_config.dual_mode = 0;
 
-	/* set buffer size according to USB port speed */
+	/* Set adapter0 buffer size according to USB port speed, adapter1 buffer
+	   size can be static because it is enabled only USB2.0 */
 	for (i = 0; i < af9015_properties_count; i++) {
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
-			af9015_properties[i].adapter->stream.u.bulk.buffersize =
-				TS_USB11_MAX_PACKET_SIZE;
+			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+				= TS_USB11_MAX_PACKET_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
 		} else {
-			af9015_properties[i].adapter->stream.u.bulk.buffersize =
-				TS_USB20_MAX_PACKET_SIZE;
+			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+				= TS_USB20_MAX_PACKET_SIZE;
 		}
 	}
 
@@ -1254,6 +1260,12 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.type = USB_BULK,
 					.count = 6,
 					.endpoint = 0x85,
+					.u = {
+						.bulk = {
+							.buffersize =
+						TS_USB20_MAX_PACKET_SIZE,
+						}
+					}
 				},
 			}
 		},
@@ -1353,6 +1365,12 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.type = USB_BULK,
 					.count = 6,
 					.endpoint = 0x85,
+					.u = {
+						.bulk = {
+							.buffersize =
+						TS_USB20_MAX_PACKET_SIZE,
+						}
+					}
 				},
 			}
 		},
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3917327..635d30a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1393,6 +1393,9 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_ASUS,	USB_PID_ASUS_U3000H) },
 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
 	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E_SE) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
+	{ USB_DEVICE(USB_VID_TERRATEC,
+			USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1537,7 +1540,8 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "DiBcom STK7700D reference design",
 				{ &dib0700_usb_id_table[14], NULL },
 				{ NULL },
-			}
+			},
+
 		},
 
 		.rc_interval      = DEFAULT_RC_INTERVAL,
@@ -1557,7 +1561,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 2,
+		.num_device_descs = 3,
 		.devices = {
 			{   "ASUS My Cinema U3000 Mini DVBT Tuner",
 				{ &dib0700_usb_id_table[23], NULL },
@@ -1566,6 +1570,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Yuan EC372S",
 				{ &dib0700_usb_id_table[31], NULL },
 				{ NULL },
+			},
+			{   "Terratec Cinergy T Express",
+				{ &dib0700_usb_id_table[42], NULL },
+				{ NULL },
 			}
 		},
 
@@ -1653,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 4,
+		.num_device_descs = 5,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1670,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Hauppauge Nova-TD-500 (84xxx)",
 				{ &dib0700_usb_id_table[36], NULL },
 				{ NULL },
+			},
+			{  "Terratec Cinergy DT USB XS Diversity",
+				{ &dib0700_usb_id_table[43], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index a4fca3f..0db0c06 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -162,8 +162,10 @@
 #define USB_PID_AVERMEDIA_A309				0xa309
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
+#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
+#define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
 #define USB_PID_PINNACLE_PCTV2000E			0x022c
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index ec4e08d..1e81e71 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s,
 	u32 edi = 0, ebx = 0, ebp = 0, edx = 0;
 	u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0;
 
-	int rc, df_tuner;
+	int rc, df_tuner = 0;
 	int a, b, c, d;
 	pr_debug("%s %d\n", __func__, s->config.d60);
 
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index cf4d893..3e08d98 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe,
 
 	s5h1409_enable_modulation(fe, p->u.vsb.modulation);
 
-	/* Allow the demod to settle */
-	msleep(100);
-
 	if (fe->ops.tuner_ops.set_params) {
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
@@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe,
 		s5h1409_set_qam_interleave_mode(fe);
 	}
 
+	/* Issue a reset to the demod so it knows to resync against the
+	   newly tuned frequency */
+	s5h1409_softreset(fe);
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index 83dc7e1..a67d177 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d)
 	return n;
 }
 
+#if 0
+/* These functions are currently unused */
 /*
  * stb0899_calc_srate
  * Compute symbol rate
@@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state)
 
 	return stb0899_calc_srate(internal->master_clk, sfr);
 }
+#endif
 
 /*
  * stb0899_set_srate
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 1638e1d..83e9e77 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget)
 		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = NULL;
 			break;
 		}
 		break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 0aa96df..d91e063 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec)
 static int ttusb_dec_init_stb(struct ttusb_dec *dec)
 {
 	int result;
-	unsigned int mode, model, version;
+	unsigned int mode = 0, model = 0, version = 0;
 
 	dprintk("%s\n", __func__);
 
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 0747dc8..fdfc7bf 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->muted = 0;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
@@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->muted = 1;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
@@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq)
 		return retval;
 	}
 
-	mutex_unlock(&radio->lock);
-
 	radio->stereo = 0;
 
+	mutex_unlock(&radio->lock);
+
 	return retval;
 }
 
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 14bebf8..87e9107 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -18,7 +18,6 @@
  */
 
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 8f1db57..bfe2584 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file)
 	lock_kernel();
 	list_for_each(list, &cx23885_devlist) {
 		h = list_entry(list, struct cx23885_dev, devlist);
-		if (h->v4l_device->minor == minor) {
+		if (h->v4l_device &&
+		    h->v4l_device->minor == minor) {
 			dev = h;
 			break;
 		}
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 2d81c4d..eaa1189 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -730,12 +730,13 @@ static int video_open(struct file *file)
 	lock_kernel();
 	list_for_each(list, &cx23885_devlist) {
 		h = list_entry(list, struct cx23885_dev, devlist);
-		if (h->video_dev->minor == minor) {
+		if (h->video_dev &&
+		    h->video_dev->minor == minor) {
 			dev  = h;
 			type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 		}
 		if (h->vbi_dev &&
-		   h->vbi_dev->minor == minor) {
+		    h->vbi_dev->minor == minor) {
 			dev  = h;
 			type = V4L2_BUF_TYPE_VBI_CAPTURE;
 		}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 88f2fd3..25eb3bec 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd)
 
 static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg)
 {
+	/* ignore this command */
+	if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG)
+		return 0;
+
+	/* Old-style drivers rely on initialization on first use, so
+	   call the init whenever a command is issued to this driver.
+	   New-style drivers using v4l2_subdev should call init explicitly. */
+	cx25840_init(i2c_get_clientdata(client), 0);
 	return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
 }
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 613dfea..aef5297 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = {
 	.set_ts_params = cx24116_set_ts_param,
 };
 
-static int dvb_register(struct cx8802_dev *dev)
+static int cx8802_alloc_frontends(struct cx8802_dev *dev)
 {
 	struct cx88_core *core = dev->core;
-	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
-	int mfe_shared = 0; /* bus not shared by default */
+	struct videobuf_dvb_frontend *fe = NULL;
 	int i;
 
-	if (0 != core->i2c_rc) {
-		printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
-		goto frontend_detach;
-	}
-
-	if (!core->board.num_frontends)
-		return -EINVAL;
-
 	mutex_init(&dev->frontends.lock);
 	INIT_LIST_HEAD(&dev->frontends.felist);
 
+	if (!core->board.num_frontends)
+		return -ENODEV;
+
 	printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
 			 core->board.num_frontends);
 	for (i = 1; i <= core->board.num_frontends; i++) {
-		fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i);
-		if (!fe0) {
+		fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
+		if (!fe) {
 			printk(KERN_ERR "%s() failed to alloc\n", __func__);
 			videobuf_dvb_dealloc_frontends(&dev->frontends);
-			goto frontend_detach;
+			return -ENOMEM;
 		}
 	}
+	return 0;
+}
+
+static int dvb_register(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+
+	if (0 != core->i2c_rc) {
+		printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
+		goto frontend_detach;
+	}
 
 	/* Get the first frontend */
 	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
@@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
 	int err;
+	struct videobuf_dvb_frontend *fe;
+	int i;
 
 	dprintk( 1, "%s\n", __func__);
 	dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
@@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	/* If vp3054 isn't enabled, a stub will just return 0 */
 	err = vp3054_i2c_probe(dev);
 	if (0 != err)
-		goto fail_probe;
+		goto fail_core;
 
 	/* dvb stuff */
 	printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
 	dev->ts_gen_cntrl = 0x0c;
 
+	err = cx8802_alloc_frontends(dev);
+	if (err)
+		goto fail_core;
+
 	err = -ENODEV;
-	if (core->board.num_frontends) {
-		struct videobuf_dvb_frontend *fe;
-		int i;
-
-		for (i = 1; i <= core->board.num_frontends; i++) {
-			fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
-			if (fe == NULL) {
-				printk(KERN_ERR "%s() failed to get frontend(%d)\n",
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
+		if (fe == NULL) {
+			printk(KERN_ERR "%s() failed to get frontend(%d)\n",
 					__func__, i);
-				goto fail_probe;
-			}
-			videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
+			goto fail_probe;
+		}
+		videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
 				    &dev->pci->dev, &dev->slock,
 				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				    V4L2_FIELD_TOP,
 				    sizeof(struct cx88_buffer),
 				    dev);
-			/* init struct videobuf_dvb */
-			fe->dvb.name = dev->core->name;
-		}
-	} else {
-		/* no frontends allocated */
-		printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n",
-			core->name);
-		goto fail_core;
+		/* init struct videobuf_dvb */
+		fe->dvb.name = dev->core->name;
 	}
+
 	err = dvb_register(dev);
 	if (err)
 		/* frontends/adapter de-allocated in dvb_register */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 60a8b31..6025fdd 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -336,8 +336,8 @@ struct cx88_core {
 	/* config info -- dvb */
 #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 	int 			   (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-	void			   (*gate_ctrl)(struct cx88_core  *core, int open);
 #endif
+	void			   (*gate_ctrl)(struct cx88_core  *core, int open);
 
 	/* state info */
 	struct task_struct         *kthread;
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 94378cc..5d882a4 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -62,9 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev)
 
 	dprintk("Stopping isoc\n");
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
-		usb_unlink_urb(dev->adev.urb[i]);
+		if (!irqs_disabled())
+			usb_kill_urb(dev->adev.urb[i]);
+		else
+			usb_unlink_urb(dev->adev.urb[i]);
 		usb_free_urb(dev->adev.urb[i]);
 		dev->adev.urb[i] = NULL;
+
+		kfree(dev->adev.transfer_buffer[i]);
+		dev->adev.transfer_buffer[i] = NULL;
 	}
 
 	return 0;
@@ -389,11 +395,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
 						    *substream)
 {
-	struct em28xx *dev;
+       unsigned long flags;
 
+	struct em28xx *dev;
 	snd_pcm_uframes_t hwptr_done;
+
 	dev = snd_pcm_substream_chip(substream);
+       spin_lock_irqsave(&dev->adev.slock, flags);
 	hwptr_done = dev->adev.hwptr_done_capture;
+       spin_unlock_irqrestore(&dev->adev.slock, flags);
 
 	return hwptr_done;
 }
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ef9bf00..3b3ca3f 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 /* Board  - EM2870 Kworld 355u
    Analog - No input analog */
 
+static struct em28xx_reg_seq kworld_330u_analog[] = {
+	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x00,	0xff,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq kworld_330u_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
-	[EM2883_BOARD_KWORLD_HYBRID_A316] = {
+	[EM2883_BOARD_KWORLD_HYBRID_330U] = {
 		.name         = "Kworld PlusTV HD Hybrid 330",
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
 		.mts_firmware = 1,
 		.has_dvb      = 1,
-		.dvb_gpio     = default_digital,
+		.dvb_gpio     = kworld_330u_digital,
+		.xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
-			.gpio     = default_analog,
+			.gpio     = kworld_330u_analog,
+			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = hauppauge_wintv_hvr_900_analog,
+			.gpio     = kworld_330u_analog,
+			.aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = hauppauge_wintv_hvr_900_analog,
+			.gpio     = kworld_330u_analog,
 		} },
 	},
 	[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
@@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = {
 	{ USB_DEVICE(0xeb1a, 0xe310),
 			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
 	{ USB_DEVICE(0xeb1a, 0xa316),
-			.driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
+			.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
 	{ USB_DEVICE(0xeb1a, 0xe320),
 			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
 	{ USB_DEVICE(0xeb1a, 0xe323),
@@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		/* FIXME: Better to specify the needed IF */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
+	case EM2883_BOARD_KWORLD_HYBRID_330U:
+		ctl->demod = XC3028_FE_CHINA;
+		ctl->fname = XC2028_DEFAULT_FIRMWARE;
+		break;
 	default:
 		ctl->demod = XC3028_FE_OREN538;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index eb5fb05..94fb1b6 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
 		int vol;
 
+		em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200);
+		em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031);
+		em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80);
+
 		/* LSB: left channel - both channels with the same level */
 		vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
 
@@ -454,6 +458,15 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 				em28xx_warn("couldn't setup AC97 register %d\n",
 				     outputs[i].reg);
 		}
+
+		if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
+			int sel = ac97_return_record_select(dev->ctl_aoutput);
+
+			/* Use the same input for both left and right channels */
+			sel |= (sel << 8);
+
+			em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
+		}
 	}
 
 	return ret;
@@ -847,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev)
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
 		urb = dev->isoc_ctl.urb[i];
 		if (urb) {
-			usb_kill_urb(urb);
-			usb_unlink_urb(urb);
+			if (!irqs_disabled())
+				usb_kill_urb(urb);
+			else
+				usb_unlink_urb(urb);
+
 			if (dev->isoc_ctl.transfer_buffer[i]) {
 				usb_buffer_free(dev->udev,
 					urb->transfer_buffer_length,
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index d38cb21..9ad8527 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -28,6 +28,7 @@
 
 #include "lgdt330x.h"
 #include "zl10353.h"
+#include "s5h1409.h"
 #ifdef EM28XX_DRX397XD_SUPPORT
 #include "drx397xD.h"
 #endif
@@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.if2 = 45600,
 };
 
+static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_PARALLEL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+};
+
 #ifdef EM28XX_DRX397XD_SUPPORT
 /* [TODO] djh - not sure yet what the device config needs to contain */
 static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev)
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
-	case EM2883_BOARD_KWORLD_HYBRID_A316:
 	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		dvb->frontend = dvb_attach(lgdt330x_attach,
 					   &em2880_lgdt3303_dev,
@@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2883_BOARD_KWORLD_HYBRID_330U:
+		dvb->frontend = dvb_attach(s5h1409_attach,
+					   &em28xx_s5h1409_with_xc3028,
+					   &dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 #ifdef EM28XX_DRX397XD_SUPPORT
 		/* We don't have the config structure properly populated, so
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 416b691..8e61b2c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	if (0 == INPUT(i)->type)
 		return -EINVAL;
 
-	mutex_lock(&dev->lock);
-
-	video_mux(dev, i);
+	dev->ctl_input = i;
 
+	mutex_lock(&dev->lock);
+	video_mux(dev, dev->ctl_input);
 	mutex_unlock(&dev->lock);
 	return 0;
 }
@@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
 	struct em28xx_fh   *fh  = priv;
 	struct em28xx      *dev = fh->dev;
 
+
+	if (a->index >= MAX_EM28XX_INPUT)
+		return -EINVAL;
+	if (0 == INPUT(a->index)->type)
+		return -EINVAL;
+
 	mutex_lock(&dev->lock);
 
 	dev->ctl_ainput = INPUT(a->index)->amux;
@@ -1950,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 
 int em28xx_register_analog_devices(struct em28xx *dev)
 {
+      u8 val;
 	int ret;
 
 	printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n",
@@ -1957,34 +1964,34 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 		(EM28XX_VERSION_CODE >> 16) & 0xff,
 		(EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
 
+	/* set default norm */
+	dev->norm = em28xx_video_template.current_norm;
+	dev->width = norm_maxw(dev);
+	dev->height = norm_maxh(dev);
+	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
+	dev->hscale = 0;
+	dev->vscale = 0;
+	dev->ctl_input = 0;
+
 	/* Analog specific initialization */
 	dev->format = &format[0];
-	video_mux(dev, 0);
+	video_mux(dev, dev->ctl_input);
+
+	/* Audio defaults */
+	dev->mute = 1;
+	dev->volume = 0x1f;
 
 	/* enable vbi capturing */
 
 /*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
-/*	em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */
+       val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
+       em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val));
 	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 
-	dev->mute = 1;		/* maybe not the right place... */
-	dev->volume = 0x1f;
-
 	em28xx_set_outfmt(dev);
 	em28xx_colorlevels_set_default(dev);
 	em28xx_compression_disable(dev);
 
-	/* set default norm */
-	dev->norm = em28xx_video_template.current_norm;
-	dev->width = norm_maxw(dev);
-	dev->height = norm_maxh(dev);
-	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
-	dev->hscale = 0;
-	dev->vscale = 0;
-
-	/* FIXME: This is a very bad hack! Not all devices have TV on input 2 */
-	dev->ctl_input = 2;
-
 	/* allocate and fill video video_device struct */
 	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
 	if (!dev->vdev) {
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6c6b94a..dd2cd36 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -94,7 +94,7 @@
 #define EM2882_BOARD_KWORLD_VS_DVBT		  54
 #define EM2882_BOARD_TERRATEC_HYBRID_XS		  55
 #define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
-#define EM2883_BOARD_KWORLD_HYBRID_A316		  57
+#define EM2883_BOARD_KWORLD_HYBRID_330U                  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850	  60
 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2	  61
@@ -300,13 +300,32 @@ enum em28xx_amux {
 };
 
 enum em28xx_aout {
+	/* AC97 outputs */
 	EM28XX_AOUT_MASTER = 1 << 0,
 	EM28XX_AOUT_LINE   = 1 << 1,
 	EM28XX_AOUT_MONO   = 1 << 2,
 	EM28XX_AOUT_LFE    = 1 << 3,
 	EM28XX_AOUT_SURR   = 1 << 4,
+
+	/* PCM IN Mixer - used by AC97_RECORD_SELECT register */
+	EM28XX_AOUT_PCM_IN = 1 << 7,
+
+	/* Bits 10-8 are used to indicate the PCM IN record select */
+	EM28XX_AOUT_PCM_MIC_PCM = 0 << 8,
+	EM28XX_AOUT_PCM_CD	= 1 << 8,
+	EM28XX_AOUT_PCM_VIDEO	= 2 << 8,
+	EM28XX_AOUT_PCM_AUX	= 3 << 8,
+	EM28XX_AOUT_PCM_LINE	= 4 << 8,
+	EM28XX_AOUT_PCM_STEREO	= 5 << 8,
+	EM28XX_AOUT_PCM_MONO	= 6 << 8,
+	EM28XX_AOUT_PCM_PHONE	= 7 << 8,
 };
 
+static inline int ac97_return_record_select(int a_out)
+{
+	return (a_out & 0x700) >> 8;
+}
+
 struct em28xx_reg_seq {
 	int reg;
 	unsigned char val, mask;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 5e36b9a..2ed2452 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 			break;
 
 		gspca_dev->urb[i] = NULL;
-		usb_kill_urb(urb);
+		if (!gspca_dev->present)
+			usb_kill_urb(urb);
 		if (urb->transfer_buffer != NULL)
 			usb_buffer_free(gspca_dev->dev,
 					urb->transfer_buffer_length,
@@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf)
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
 	gspca_dev->present = 0;
-	gspca_dev->streaming = 0;
 
 	usb_set_intfdata(intf, NULL);
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index e8e5921..c46c990 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
 	itv->instance = atomic_inc_return(&ivtv_instance) - 1;
 
 	retval = v4l2_device_register(&dev->dev, &itv->device);
-	if (retval)
+	if (retval) {
+		kfree(itv);
 		return retval;
+	}
 	/* "ivtv + PCI ID" is a bit of a mouthful, so use
 	   "ivtv + instance" instead. */
 	snprintf(itv->device.name, sizeof(itv->device.name),
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 39fbc97..0d81018 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,7 +62,6 @@
 #include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <asm/io.h>
 
 #include "pwc.h"
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index d6848f7..05221d4 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = {
 	{ SAA7127_REG_COPYGEN_0, 			0x77 },
 	{ SAA7127_REG_COPYGEN_1, 			0x41 },
 	{ SAA7127_REG_COPYGEN_2, 			0x00 },	/* Macrovision enable/disable */
-	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x9e },
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0xbf },
 	{ SAA7127_REG_GAIN_LUMINANCE_RGB, 		0x00 },
 	{ SAA7127_REG_GAIN_COLORDIFF_RGB, 		0x00 },
 	{ SAA7127_REG_INPUT_PORT_CONTROL_1, 		0x80 },	/* for color bars */
@@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
 		break;
 
 	case SAA7127_OUTPUT_TYPE_COMPOSITE:
-		state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x20;	/* CVBS only */
+		else
+			state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
 	case SAA7127_OUTPUT_TYPE_SVIDEO:
-		state->reg_2d = 0xff;	/* 11111111  croma -> R, luma -> CVBS + G + B */
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x18;	/* Y + C */
+		else
+			state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
@@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
 		break;
 
 	case SAA7127_OUTPUT_TYPE_BOTH:
-		state->reg_2d = 0xbf;
+		if (state->ident == V4L2_IDENT_SAA7129)
+			state->reg_2d = 0x38;
+		else
+			state->reg_2d = 0xbf;
 		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
 		break;
 
@@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	/* Configure Encoder */
-
-	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
-	saa7127_write_inittab(sd, saa7127_init_config_common);
-	saa7127_set_std(sd, V4L2_STD_NTSC);
-	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
-	saa7127_set_vps(sd, &vbi);
-	saa7127_set_wss(sd, &vbi);
-	saa7127_set_cc(sd, &vbi);
-	saa7127_set_xds(sd, &vbi);
-	if (test_image == 1)
-		/* The Encoder has an internal Colorbar generator */
-		/* This can be used for debugging */
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
-	else
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
-	saa7127_set_video_enable(sd, 1);
-
 	if (id->driver_data) {	/* Chip type is already known */
 		state->ident = id->driver_data;
 	} else {		/* Needs detection */
@@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client,
 
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 			client->addr << 1, client->adapter->name);
+
+	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
+	saa7127_write_inittab(sd, saa7127_init_config_common);
+	saa7127_set_std(sd, V4L2_STD_NTSC);
+	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
+	saa7127_set_vps(sd, &vbi);
+	saa7127_set_wss(sd, &vbi);
+	saa7127_set_cc(sd, &vbi);
+	saa7127_set_xds(sd, &vbi);
+	if (test_image == 1)
+		/* The Encoder has an internal Colorbar generator */
+		/* This can be used for debugging */
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
+	else
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
+	saa7127_set_video_enable(sd, 1);
+
 	if (state->ident == V4L2_IDENT_SAA7129)
 		saa7127_write_inittab(sd, saa7129_init_config_extra);
 	return 0;
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index 26194a0..c750d3d 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void)
 
 	list_for_each(list,&saa7134_devlist) {
 		dev = list_entry(list, struct saa7134_dev, devlist);
-		alsa_device_init(dev);
+		if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130)
+			printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n",
+				dev->name, saa7134_boards[dev->board].name);
+		else
+			alsa_device_init(dev);
 	}
 
 	if (dev == NULL)
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index dfbe08a..99221d7 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev)
 
 	saa_writel(SAA7134_IRQ1, 0);
 	saa_writel(SAA7134_IRQ2, 0);
+
+	/* Clear any stale IRQ reports */
+	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
+
 	mutex_init(&dev->lock);
 	spin_lock_init(&dev->slock);
 
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 454ad1d..88c5e94 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -30,7 +30,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index 56f0c0e..00c6cbe 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct tda9875 *t = to_state(sd);
-	int chvol=0, volume, balance, left, right;
+	int chvol = 0, volume = 0, balance = 0, left, right;
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_VOLUME:
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 3b0b84c..78277ab 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 	const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" };
 
 	memset(tvee, 0, sizeof(*tvee));
+	tvee->tuner_type = TUNER_ABSENT;
+	tvee->tuner2_type = TUNER_ABSENT;
+
 	done = len = beenhere = 0;
 
 	/* Different eeprom start offsets for em28xx, cx2388x and cx23418 */
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index ac9aa40..8e23aa5 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	decoder->pdata = client->dev.platform_data;
 	if (!decoder->pdata) {
-		v4l_err(client, "No platform data\n!!");
+		v4l_err(client, "No platform data!!\n");
 		return -ENODEV;
 	}
 	/*
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
index 4f16eff..f4522bb 100644
--- a/drivers/media/video/upd64031a.c
+++ b/drivers/media/video/upd64031a.c
@@ -21,7 +21,6 @@
  */
 
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
index 4b712f6..a5fb74b 100644
--- a/drivers/media/video/upd64083.c
+++ b/drivers/media/video/upd64083.c
@@ -21,7 +21,6 @@
  * 02110-1301, USA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 9907b9a..6b66ae4 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
 	struct i2c_msg *pmsg;
 	struct usb_usbvision *usbvision;
 	int i, ret;
-	unsigned char addr;
+	unsigned char addr = 0;
 
 	usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
 
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 2208165..d2576f6 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_ctrl.c  --  USB Video Class driver - Controls
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
@@ -29,7 +28,7 @@
 #define UVC_CTRL_DATA_BACKUP	1
 
 /* ------------------------------------------------------------------------
- * Control, formats, ...
+ * Controls
  */
 
 static struct uvc_control_info uvc_ctrls[] = {
@@ -635,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping,
 		mask = (1 << bits) - 1;
 	}
 
-	/* Sign-extend the value if needed */
+	/* Sign-extend the value if needed. */
 	if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED)
 		value |= -(value & (1 << (mapping->size - 1)));
 
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 89d8bd1..b128732 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_driver.c  --  USB Video Class driver
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -24,7 +24,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/usb.h>
@@ -49,7 +48,7 @@ static unsigned int uvc_quirks_param;
 unsigned int uvc_trace_param;
 
 /* ------------------------------------------------------------------------
- * Control, formats, ...
+ * Video formats
  */
 
 static struct uvc_format_desc uvc_fmts[] = {
@@ -474,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 
 		/* Several UVC chipsets screw up dwMaxVideoFrameBufferSize
 		 * completely. Observed behaviours range from setting the
-		 * value to 1.1x the actual frame size of hardwiring the
+		 * value to 1.1x the actual frame size to hardwiring the
 		 * 16 low bits to 0. This results in a higher than necessary
 		 * memory usage as well as a wrong image size information. For
 		 * uncompressed formats this can be fixed by computing the
@@ -487,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 		/* Some bogus devices report dwMinFrameInterval equal to
 		 * dwMaxFrameInterval and have dwFrameIntervalStep set to
 		 * zero. Setting all null intervals to 1 fixes the problem and
-		 * some other divisions by zero which could happen.
+		 * some other divisions by zero that could happen.
 		 */
 		for (i = 0; i < n; ++i) {
 			interval = get_unaligned_le32(&buffer[26+4*i]);
@@ -1200,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev)
  * Scan the UVC descriptors to locate a chain starting at an Output Terminal
  * and containing the following units:
  *
- * - a USB Streaming Output Terminal
+ * - one Output Terminal (USB Streaming or Display)
  * - zero or one Processing Unit
  * - zero, one or mode single-input Selector Units
  * - zero or one multiple-input Selector Units, provided all inputs are
  *   connected to input terminals
  * - zero, one or mode single-input Extension Units
- * - one Camera Input Terminal, or one or more External terminals.
+ * - one or more Input Terminals (Camera, External or USB Streaming)
  *
  * A side forward scan is made on each detected entity to check for additional
  * extension units.
@@ -1531,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev)
 
 	/* Set the driver data before calling video_register_device, otherwise
 	 * uvc_v4l2_open might race us.
-	 *
-	 * FIXME: usb_set_intfdata hasn't been called so far. Is that a
-	 * 	  problem ? Does any function which could be called here get
-	 * 	  a pointer to the usb_interface ?
 	 */
 	dev->video.vdev = vdev;
 	video_set_drvdata(vdev, &dev->video);
@@ -1569,7 +1564,7 @@ void uvc_delete(struct kref *kref)
 	struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
 	struct list_head *p, *n;
 
-	/* Unregister the video device */
+	/* Unregister the video device. */
 	uvc_unregister_video(dev);
 	usb_put_intf(dev->intf);
 	usb_put_dev(dev->udev);
@@ -1612,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf,
 		uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n",
 				udev->devpath);
 
-	/* Allocate memory for the device and initialize it */
+	/* Allocate memory for the device and initialize it. */
 	if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 
@@ -1633,14 +1628,14 @@ static int uvc_probe(struct usb_interface *intf,
 			le16_to_cpu(udev->descriptor.idVendor),
 			le16_to_cpu(udev->descriptor.idProduct));
 
-	/* Parse the Video Class control descriptor */
+	/* Parse the Video Class control descriptor. */
 	if (uvc_parse_control(dev) < 0) {
 		uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC "
 			"descriptors.\n");
 		goto error;
 	}
 
-	uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n",
+	uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n",
 		dev->uvc_version >> 8, dev->uvc_version & 0xff,
 		udev->product ? udev->product : "<unnamed>",
 		le16_to_cpu(udev->descriptor.idVendor),
@@ -1653,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf,
 			"linux-uvc-devel mailing list.\n");
 	}
 
-	/* Initialize controls */
+	/* Initialize controls. */
 	if (uvc_ctrl_init_device(dev) < 0)
 		goto error;
 
-	/* Register the video devices */
+	/* Register the video devices. */
 	if (uvc_register_video(dev) < 0)
 		goto error;
 
-	/* Save our data pointer in the interface data */
+	/* Save our data pointer in the interface data. */
 	usb_set_intfdata(intf, dev);
 
-	/* Initialize the interrupt URB */
+	/* Initialize the interrupt URB. */
 	if ((ret = uvc_status_init(dev)) < 0) {
 		uvc_printk(KERN_INFO, "Unable to initialize the status "
 			"endpoint (%d), status interrupt will not be "
@@ -1839,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0 },
 	/* Apple Built-In iSight */
-	{ .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x05ac,
 	  .idProduct		= 0x8501,
-	  .bInterfaceClass      = USB_CLASS_VIDEO,
-	  .bInterfaceSubClass   = 1,
-	  .bInterfaceProtocol   = 0,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_BUILTIN_ISIGHT },
 	/* Genesys Logic USB 2.0 PC Camera */
-	{ .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
-	  .idVendor             = 0x05e3,
-	  .idProduct            = 0x0505,
-	  .bInterfaceClass      = USB_CLASS_VIDEO,
-	  .bInterfaceSubClass   = 1,
-	  .bInterfaceProtocol   = 0,
-	  .driver_info          = UVC_QUIRK_STREAM_NO_FID },
+	  .idVendor		= 0x05e3,
+	  .idProduct		= 0x0505,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
 	/* MT6227 */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c
index 37bdefd..436f462 100644
--- a/drivers/media/video/uvc/uvc_isight.c
+++ b/drivers/media/video/uvc/uvc_isight.c
@@ -3,6 +3,8 @@
  *
  *	Copyright (C) 2006-2007
  *		Ivan N. Zlatev <contact@i-nz.net>
+ *	Copyright (C) 2008-2009
+ *		Laurent Pinchart <laurent.pinchart@skynet.be>
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 4254634..0155752 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_queue.c  --  USB Video Class driver - Buffers management
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -37,22 +36,22 @@
  * to user space will return -EBUSY.
  *
  * Video buffers are managed using two queues. However, unlike most USB video
- * drivers which use an in queue and an out queue, we use a main queue which
- * holds all queued buffers (both 'empty' and 'done' buffers), and an irq
- * queue which holds empty buffers. This design (copied from video-buf)
- * minimizes locking in interrupt, as only one queue is shared between
- * interrupt and user contexts.
+ * drivers that use an in queue and an out queue, we use a main queue to hold
+ * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to
+ * hold empty buffers. This design (copied from video-buf) minimizes locking
+ * in interrupt, as only one queue is shared between interrupt and user
+ * contexts.
  *
  * Use cases
  * ---------
  *
- * Unless stated otherwise, all operations which modify the irq buffers queue
+ * Unless stated otherwise, all operations that modify the irq buffers queue
  * are protected by the irq spinlock.
  *
  * 1. The user queues the buffers, starts streaming and dequeues a buffer.
  *
  *    The buffers are added to the main and irq queues. Both operations are
- *    protected by the queue lock, and the latert is protected by the irq
+ *    protected by the queue lock, and the later is protected by the irq
  *    spinlock as well.
  *
  *    The completion handler fetches a buffer from the irq queue and fills it
@@ -60,7 +59,7 @@
  *    returns immediately.
  *
  *    When the buffer is full, the completion handler removes it from the irq
- *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue.
+ *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
  *    At that point, any process waiting on the buffer will be woken up. If a
  *    process tries to dequeue a buffer after it has been marked ready, the
  *    dequeing will succeed immediately.
@@ -91,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 /*
  * Allocate the video buffers.
  *
- * Pages are reserved to make sure they will not be swaped, as they will be
- * filled in URB completion handler.
+ * Pages are reserved to make sure they will not be swapped, as they will be
+ * filled in the URB completion handler.
  *
  * Buffers will be individually mapped, so they must all be page aligned.
  */
@@ -210,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue,
 	__uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
 
 done:
-       mutex_unlock(&queue->mutex);
-       return ret;
+	mutex_unlock(&queue->mutex);
+	return ret;
 }
 
 /*
@@ -236,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue,
 	}
 
 	mutex_lock(&queue->mutex);
-	if (v4l2_buf->index >= queue->count)  {
+	if (v4l2_buf->index >= queue->count) {
 		uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
 		ret = -EINVAL;
 		goto done;
@@ -429,7 +428,7 @@ done:
  * Cancel the video buffers queue.
  *
  * Cancelling the queue marks all buffers on the irq queue as erroneous,
- * wakes them up and remove them from the queue.
+ * wakes them up and removes them from the queue.
  *
  * If the disconnect parameter is set, further calls to uvc_queue_buffer will
  * fail with -ENODEV.
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index 5d60b26..c1e4ae2 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_status.c  --  USB Video Class driver - Status endpoint
  *
- *      Copyright (C) 2007-2008
+ *      Copyright (C) 2007-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index fa150ff..d681519 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_v4l2.c  --  USB Video Class driver - V4L2 API
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -37,7 +37,7 @@
  * must be grouped (for instance the Red Balance, Blue Balance and Do White
  * Balance V4L2 controls use the White Balance Component UVC control) or
  * otherwise translated. The approach we take here is to use a translation
- * table for the controls which can be mapped directly, and handle the others
+ * table for the controls that can be mapped directly, and handle the others
  * manually.
  */
 static int uvc_v4l2_query_menu(struct uvc_video_device *video,
@@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video,
 		probe->dwMaxVideoFrameSize =
 			video->streaming->ctrl.dwMaxVideoFrameSize;
 
-	/* Probe the device */
+	/* Probe the device. */
 	if ((ret = uvc_probe_video(video, probe)) < 0)
 		goto done;
 
@@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video,
  *
  * Each open instance of a UVC device can either be in a privileged or
  * unprivileged state. Only a single instance can be in a privileged state at
- * a given time. Trying to perform an operation which requires privileges will
+ * a given time. Trying to perform an operation that requires privileges will
  * automatically acquire the required privileges if possible, or return -EBUSY
  * otherwise. Privileges are dismissed when closing the instance.
  *
- * Operations which require privileges are:
+ * Operations that require privileges are:
  *
  * - VIDIOC_S_INPUT
  * - VIDIOC_S_PARM
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index e7c3199..9bc4705 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1,7 +1,7 @@
 /*
  *      uvc_video.c  --  USB Video Class driver - Video handling
  *
- *      Copyright (C) 2005-2008
+ *      Copyright (C) 2005-2009
  *          Laurent Pinchart (laurent.pinchart@skynet.be)
  *
  *      This program is free software; you can redistribute it and/or modify
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/usb.h>
@@ -115,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 		ctrl->wCompQuality = le16_to_cpup((__le16 *)data);
 		ret = 0;
 		goto out;
-	} else if (query == GET_DEF && probe == 1) {
+	} else if (query == GET_DEF && probe == 1 && ret != size) {
 		/* Many cameras don't support the GET_DEF request on their
 		 * video probe control. Warn once and return, the caller will
 		 * fall back to GET_CUR.
@@ -160,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video,
 	}
 
 	/* Some broken devices return a null or wrong dwMaxVideoFrameSize.
-	 * Try to get the value from the format and frame descriptor.
+	 * Try to get the value from the format and frame descriptors.
 	 */
 	uvc_fixup_buffer_size(video, ctrl);
 	ret = 0;
@@ -191,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video,
 	*(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
 	*(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
 	*(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
-	/* Note: Some of the fields below are not required for IN devices (see
-	 * UVC spec, 4.3.1.1), but we still copy them in case support for OUT
-	 * devices is added in the future. */
 	put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
 	put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);
 
@@ -400,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video,
 	 *
 	 * Empty buffers (bytesused == 0) don't trigger end of frame detection
 	 * as it doesn't make sense to return an empty buffer. This also
-	 * avoids detecting and of frame conditions at FID toggling if the
+	 * avoids detecting end of frame conditions at FID toggling if the
 	 * previous payload had the EOF bit set.
 	 */
 	if (fid != video->last_fid && buf->buf.bytesused != 0) {
@@ -453,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video,
 	}
 }
 
+/* Video payload encoding is handled by uvc_video_encode_header() and
+ * uvc_video_encode_data(). Only bulk transfers are currently supported.
+ *
+ * uvc_video_encode_header is called at the start of a payload. It adds header
+ * data to the transfer buffer and returns the header size. As the only known
+ * UVC output device transfers a whole frame in a single payload, the EOF bit
+ * is always set in the header.
+ *
+ * uvc_video_encode_data is called for every URB and copies the data from the
+ * video buffer to the transfer buffer.
+ */
 static int uvc_video_encode_header(struct uvc_video_device *video,
 		struct uvc_buffer *buf, __u8 *data, int len)
 {
@@ -953,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video)
 }
 
 /*
- * Reconfigure the video interface and restart streaming if it was enable
+ * Reconfigure the video interface and restart streaming if it was enabled
  * before suspend.
  *
  * If an error occurs, disable the video queue. This will wake all pending
@@ -985,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video)
  */
 
 /*
- * Initialize the UVC video device by retrieving the default format and
- * committing it.
+ * Initialize the UVC video device by switching to alternate setting 0 and
+ * retrieve the default format.
  *
  * Some cameras (namely the Fuji Finepix) set the format and frame
  * indexes to zero. The UVC standard doesn't clearly make this a spec
@@ -1014,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video)
 	 */
 	usb_set_interface(video->dev->udev, video->streaming->intfnum, 0);
 
-	/* Some webcams don't suport GET_DEF request on the probe control. We
+	/* Some webcams don't suport GET_DEF requests on the probe control. We
 	 * fall back to GET_CUR if GET_DEF fails.
 	 */
 	if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 &&
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index bcf4361..027947e 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -72,149 +72,149 @@ struct uvc_xu_control {
  * UVC constants
  */
 
-#define SC_UNDEFINED                    0x00
-#define SC_VIDEOCONTROL                 0x01
-#define SC_VIDEOSTREAMING               0x02
-#define SC_VIDEO_INTERFACE_COLLECTION   0x03
+#define SC_UNDEFINED			0x00
+#define SC_VIDEOCONTROL			0x01
+#define SC_VIDEOSTREAMING		0x02
+#define SC_VIDEO_INTERFACE_COLLECTION	0x03
 
-#define PC_PROTOCOL_UNDEFINED           0x00
+#define PC_PROTOCOL_UNDEFINED		0x00
 
-#define CS_UNDEFINED                    0x20
-#define CS_DEVICE                       0x21
-#define CS_CONFIGURATION                0x22
-#define CS_STRING                       0x23
-#define CS_INTERFACE                    0x24
-#define CS_ENDPOINT                     0x25
+#define CS_UNDEFINED			0x20
+#define CS_DEVICE			0x21
+#define CS_CONFIGURATION		0x22
+#define CS_STRING			0x23
+#define CS_INTERFACE			0x24
+#define CS_ENDPOINT			0x25
 
 /* VideoControl class specific interface descriptor */
-#define VC_DESCRIPTOR_UNDEFINED         0x00
-#define VC_HEADER                       0x01
-#define VC_INPUT_TERMINAL               0x02
-#define VC_OUTPUT_TERMINAL              0x03
-#define VC_SELECTOR_UNIT                0x04
-#define VC_PROCESSING_UNIT              0x05
-#define VC_EXTENSION_UNIT               0x06
+#define VC_DESCRIPTOR_UNDEFINED		0x00
+#define VC_HEADER			0x01
+#define VC_INPUT_TERMINAL		0x02
+#define VC_OUTPUT_TERMINAL		0x03
+#define VC_SELECTOR_UNIT		0x04
+#define VC_PROCESSING_UNIT		0x05
+#define VC_EXTENSION_UNIT		0x06
 
 /* VideoStreaming class specific interface descriptor */
-#define VS_UNDEFINED                    0x00
-#define VS_INPUT_HEADER                 0x01
-#define VS_OUTPUT_HEADER                0x02
-#define VS_STILL_IMAGE_FRAME            0x03
-#define VS_FORMAT_UNCOMPRESSED          0x04
-#define VS_FRAME_UNCOMPRESSED           0x05
-#define VS_FORMAT_MJPEG                 0x06
-#define VS_FRAME_MJPEG                  0x07
-#define VS_FORMAT_MPEG2TS               0x0a
-#define VS_FORMAT_DV                    0x0c
-#define VS_COLORFORMAT                  0x0d
-#define VS_FORMAT_FRAME_BASED           0x10
-#define VS_FRAME_FRAME_BASED            0x11
-#define VS_FORMAT_STREAM_BASED          0x12
+#define VS_UNDEFINED			0x00
+#define VS_INPUT_HEADER			0x01
+#define VS_OUTPUT_HEADER		0x02
+#define VS_STILL_IMAGE_FRAME		0x03
+#define VS_FORMAT_UNCOMPRESSED		0x04
+#define VS_FRAME_UNCOMPRESSED		0x05
+#define VS_FORMAT_MJPEG			0x06
+#define VS_FRAME_MJPEG			0x07
+#define VS_FORMAT_MPEG2TS		0x0a
+#define VS_FORMAT_DV			0x0c
+#define VS_COLORFORMAT			0x0d
+#define VS_FORMAT_FRAME_BASED		0x10
+#define VS_FRAME_FRAME_BASED		0x11
+#define VS_FORMAT_STREAM_BASED		0x12
 
 /* Endpoint type */
-#define EP_UNDEFINED                    0x00
-#define EP_GENERAL                      0x01
-#define EP_ENDPOINT                     0x02
-#define EP_INTERRUPT                    0x03
+#define EP_UNDEFINED			0x00
+#define EP_GENERAL			0x01
+#define EP_ENDPOINT			0x02
+#define EP_INTERRUPT			0x03
 
 /* Request codes */
-#define RC_UNDEFINED                    0x00
-#define SET_CUR                         0x01
-#define GET_CUR                         0x81
-#define GET_MIN                         0x82
-#define GET_MAX                         0x83
-#define GET_RES                         0x84
-#define GET_LEN                         0x85
-#define GET_INFO                        0x86
-#define GET_DEF                         0x87
+#define RC_UNDEFINED			0x00
+#define SET_CUR				0x01
+#define GET_CUR				0x81
+#define GET_MIN				0x82
+#define GET_MAX				0x83
+#define GET_RES				0x84
+#define GET_LEN				0x85
+#define GET_INFO			0x86
+#define GET_DEF				0x87
 
 /* VideoControl interface controls */
-#define VC_CONTROL_UNDEFINED            0x00
-#define VC_VIDEO_POWER_MODE_CONTROL     0x01
-#define VC_REQUEST_ERROR_CODE_CONTROL   0x02
+#define VC_CONTROL_UNDEFINED		0x00
+#define VC_VIDEO_POWER_MODE_CONTROL	0x01
+#define VC_REQUEST_ERROR_CODE_CONTROL	0x02
 
 /* Terminal controls */
-#define TE_CONTROL_UNDEFINED            0x00
+#define TE_CONTROL_UNDEFINED		0x00
 
 /* Selector Unit controls */
-#define SU_CONTROL_UNDEFINED            0x00
-#define SU_INPUT_SELECT_CONTROL         0x01
+#define SU_CONTROL_UNDEFINED		0x00
+#define SU_INPUT_SELECT_CONTROL		0x01
 
 /* Camera Terminal controls */
-#define CT_CONTROL_UNDEFINED            		0x00
-#define CT_SCANNING_MODE_CONTROL        		0x01
-#define CT_AE_MODE_CONTROL              		0x02
-#define CT_AE_PRIORITY_CONTROL          		0x03
-#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL               0x04
-#define CT_EXPOSURE_TIME_RELATIVE_CONTROL               0x05
-#define CT_FOCUS_ABSOLUTE_CONTROL       		0x06
-#define CT_FOCUS_RELATIVE_CONTROL       		0x07
-#define CT_FOCUS_AUTO_CONTROL           		0x08
-#define CT_IRIS_ABSOLUTE_CONTROL        		0x09
-#define CT_IRIS_RELATIVE_CONTROL        		0x0a
-#define CT_ZOOM_ABSOLUTE_CONTROL        		0x0b
-#define CT_ZOOM_RELATIVE_CONTROL        		0x0c
-#define CT_PANTILT_ABSOLUTE_CONTROL     		0x0d
-#define CT_PANTILT_RELATIVE_CONTROL     		0x0e
-#define CT_ROLL_ABSOLUTE_CONTROL        		0x0f
-#define CT_ROLL_RELATIVE_CONTROL        		0x10
-#define CT_PRIVACY_CONTROL              		0x11
+#define CT_CONTROL_UNDEFINED				0x00
+#define CT_SCANNING_MODE_CONTROL			0x01
+#define CT_AE_MODE_CONTROL				0x02
+#define CT_AE_PRIORITY_CONTROL				0x03
+#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL		0x04
+#define CT_EXPOSURE_TIME_RELATIVE_CONTROL		0x05
+#define CT_FOCUS_ABSOLUTE_CONTROL			0x06
+#define CT_FOCUS_RELATIVE_CONTROL			0x07
+#define CT_FOCUS_AUTO_CONTROL				0x08
+#define CT_IRIS_ABSOLUTE_CONTROL			0x09
+#define CT_IRIS_RELATIVE_CONTROL			0x0a
+#define CT_ZOOM_ABSOLUTE_CONTROL			0x0b
+#define CT_ZOOM_RELATIVE_CONTROL			0x0c
+#define CT_PANTILT_ABSOLUTE_CONTROL			0x0d
+#define CT_PANTILT_RELATIVE_CONTROL			0x0e
+#define CT_ROLL_ABSOLUTE_CONTROL			0x0f
+#define CT_ROLL_RELATIVE_CONTROL			0x10
+#define CT_PRIVACY_CONTROL				0x11
 
 /* Processing Unit controls */
-#define PU_CONTROL_UNDEFINED            		0x00
-#define PU_BACKLIGHT_COMPENSATION_CONTROL               0x01
-#define PU_BRIGHTNESS_CONTROL           		0x02
-#define PU_CONTRAST_CONTROL             		0x03
-#define PU_GAIN_CONTROL                 		0x04
-#define PU_POWER_LINE_FREQUENCY_CONTROL 		0x05
-#define PU_HUE_CONTROL                  		0x06
-#define PU_SATURATION_CONTROL           		0x07
-#define PU_SHARPNESS_CONTROL            		0x08
-#define PU_GAMMA_CONTROL                		0x09
-#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL            0x0a
-#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL       0x0b
-#define PU_WHITE_BALANCE_COMPONENT_CONTROL              0x0c
-#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL         0x0d
-#define PU_DIGITAL_MULTIPLIER_CONTROL   		0x0e
-#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL             0x0f
-#define PU_HUE_AUTO_CONTROL             		0x10
-#define PU_ANALOG_VIDEO_STANDARD_CONTROL                0x11
-#define PU_ANALOG_LOCK_STATUS_CONTROL   		0x12
+#define PU_CONTROL_UNDEFINED				0x00
+#define PU_BACKLIGHT_COMPENSATION_CONTROL		0x01
+#define PU_BRIGHTNESS_CONTROL				0x02
+#define PU_CONTRAST_CONTROL				0x03
+#define PU_GAIN_CONTROL					0x04
+#define PU_POWER_LINE_FREQUENCY_CONTROL			0x05
+#define PU_HUE_CONTROL					0x06
+#define PU_SATURATION_CONTROL				0x07
+#define PU_SHARPNESS_CONTROL				0x08
+#define PU_GAMMA_CONTROL				0x09
+#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL		0x0a
+#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL	0x0b
+#define PU_WHITE_BALANCE_COMPONENT_CONTROL		0x0c
+#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL		0x0d
+#define PU_DIGITAL_MULTIPLIER_CONTROL			0x0e
+#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL		0x0f
+#define PU_HUE_AUTO_CONTROL				0x10
+#define PU_ANALOG_VIDEO_STANDARD_CONTROL		0x11
+#define PU_ANALOG_LOCK_STATUS_CONTROL			0x12
 
 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL		0x01
 #define LXU_MOTOR_PANTILT_RESET_CONTROL			0x02
 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL			0x03
 
 /* VideoStreaming interface controls */
-#define VS_CONTROL_UNDEFINED            0x00
-#define VS_PROBE_CONTROL                0x01
-#define VS_COMMIT_CONTROL               0x02
-#define VS_STILL_PROBE_CONTROL          0x03
-#define VS_STILL_COMMIT_CONTROL         0x04
-#define VS_STILL_IMAGE_TRIGGER_CONTROL  0x05
-#define VS_STREAM_ERROR_CODE_CONTROL    0x06
-#define VS_GENERATE_KEY_FRAME_CONTROL   0x07
-#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
-#define VS_SYNC_DELAY_CONTROL           0x09
-
-#define TT_VENDOR_SPECIFIC              0x0100
-#define TT_STREAMING                    0x0101
+#define VS_CONTROL_UNDEFINED		0x00
+#define VS_PROBE_CONTROL		0x01
+#define VS_COMMIT_CONTROL		0x02
+#define VS_STILL_PROBE_CONTROL		0x03
+#define VS_STILL_COMMIT_CONTROL		0x04
+#define VS_STILL_IMAGE_TRIGGER_CONTROL	0x05
+#define VS_STREAM_ERROR_CODE_CONTROL	0x06
+#define VS_GENERATE_KEY_FRAME_CONTROL	0x07
+#define VS_UPDATE_FRAME_SEGMENT_CONTROL	0x08
+#define VS_SYNC_DELAY_CONTROL		0x09
+
+#define TT_VENDOR_SPECIFIC		0x0100
+#define TT_STREAMING			0x0101
 
 /* Input Terminal types */
-#define ITT_VENDOR_SPECIFIC             0x0200
-#define ITT_CAMERA                      0x0201
-#define ITT_MEDIA_TRANSPORT_INPUT       0x0202
+#define ITT_VENDOR_SPECIFIC		0x0200
+#define ITT_CAMERA			0x0201
+#define ITT_MEDIA_TRANSPORT_INPUT	0x0202
 
 /* Output Terminal types */
-#define OTT_VENDOR_SPECIFIC             0x0300
-#define OTT_DISPLAY                     0x0301
-#define OTT_MEDIA_TRANSPORT_OUTPUT      0x0302
+#define OTT_VENDOR_SPECIFIC		0x0300
+#define OTT_DISPLAY			0x0301
+#define OTT_MEDIA_TRANSPORT_OUTPUT	0x0302
 
 /* External Terminal types */
-#define EXTERNAL_VENDOR_SPECIFIC        0x0400
-#define COMPOSITE_CONNECTOR             0x0401
-#define SVIDEO_CONNECTOR                0x0402
-#define COMPONENT_CONNECTOR             0x0403
+#define EXTERNAL_VENDOR_SPECIFIC	0x0400
+#define COMPOSITE_CONNECTOR		0x0401
+#define SVIDEO_CONNECTOR		0x0402
+#define COMPONENT_CONNECTOR		0x0403
 
 #define UVC_TERM_INPUT			0x0000
 #define UVC_TERM_OUTPUT			0x8000
@@ -541,11 +541,11 @@ struct uvc_streaming {
 };
 
 enum uvc_buffer_state {
-	UVC_BUF_STATE_IDLE       = 0,
-	UVC_BUF_STATE_QUEUED     = 1,
-	UVC_BUF_STATE_ACTIVE     = 2,
-	UVC_BUF_STATE_DONE       = 3,
-	UVC_BUF_STATE_ERROR      = 4,
+	UVC_BUF_STATE_IDLE	= 0,
+	UVC_BUF_STATE_QUEUED	= 1,
+	UVC_BUF_STATE_ACTIVE	= 2,
+	UVC_BUF_STATE_DONE	= 3,
+	UVC_BUF_STATE_ERROR	= 4,
 };
 
 struct uvc_buffer {
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index fbe9cc0..2120880 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg)
 {
 	switch (cmd) {
 	case VIDIOC_QUERYCTRL:
-		return v4l2_subdev_call(sd, core, querymenu, arg);
+		return v4l2_subdev_call(sd, core, queryctrl, arg);
 	case VIDIOC_G_CTRL:
 		return v4l2_subdev_call(sd, core, g_ctrl, arg);
 	case VIDIOC_S_CTRL:
 		return v4l2_subdev_call(sd, core, s_ctrl, arg);
 	case VIDIOC_QUERYMENU:
-		return v4l2_subdev_call(sd, core, queryctrl, arg);
+		return v4l2_subdev_call(sd, core, querymenu, arg);
 	case VIDIOC_LOG_STATUS:
 		return v4l2_subdev_call(sd, core, log_status);
 	case VIDIOC_DBG_G_CHIP_IDENT:
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 46b7ad4..e873a91 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -349,7 +349,6 @@ struct card_info {
 	u16 i2c_decoder, i2c_encoder;			/* I2C types */
 	u16 video_vfe, video_codec;			/* videocodec types */
 	u16 audio_chip;					/* audio type */
-	u16 vendor_id, device_id;	/* subsystem vendor/device ID */
 
 	int inputs;		/* number of video inputs */
 	struct input {
@@ -401,7 +400,6 @@ struct zoran {
 	char name[32];		/* name of this device */
 	struct pci_dev *pci_dev;	/* PCI device */
 	unsigned char revision;	/* revision of zr36057 */
-	unsigned int zr36057_adr;	/* bus address of IO mem returned by PCI BIOS */
 	unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */
 
 	spinlock_t spinlock;	/* Spinlock */
@@ -490,16 +488,10 @@ struct zoran {
 	wait_queue_head_t test_q;
 };
 
-/*The following should be done in more portable way. It depends on define
-  of _ALPHA_BUZ in the Makefile.*/
-
-#ifdef _ALPHA_BUZ
-#define btwrite(dat,adr)    writel((dat), zr->zr36057_adr+(adr))
-#define btread(adr)         readl(zr->zr36057_adr+(adr))
-#else
+/* There was something called _ALPHA_BUZ that used the PCI address instead of
+ * the kernel iomapped address for btread/btwrite.  */
 #define btwrite(dat,adr)    writel((dat), zr->zr36057_mem+(adr))
 #define btread(adr)         readl(zr->zr36057_mem+(adr))
-#endif
 
 #define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
 #define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 05f3919..5d2f090 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -61,17 +61,17 @@
 
 extern const struct zoran_format zoran_formats[];
 
-static int card[BUZ_MAX] = { -1, -1, -1, -1 };
+static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(card, int, NULL, 0444);
-MODULE_PARM_DESC(card, "The type of card");
+MODULE_PARM_DESC(card, "Card type");
 
-static int encoder[BUZ_MAX] = { -1, -1, -1, -1 };
+static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(encoder, int, NULL, 0444);
-MODULE_PARM_DESC(encoder, "i2c TV encoder");
+MODULE_PARM_DESC(encoder, "Video encoder chip");
 
-static int decoder[BUZ_MAX] = { -1, -1, -1, -1 };
+static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(decoder, int, NULL, 0444);
-MODULE_PARM_DESC(decoder, "i2c TV decoder");
+MODULE_PARM_DESC(decoder, "Video decoder chip");
 
 /*
    The video mem address of the video card.
@@ -104,9 +104,9 @@ module_param(default_norm, int, 0444);
 MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)");
 
 /* /dev/videoN, -1 for autodetect */
-static int video_nr[BUZ_MAX] = {-1, -1, -1, -1};
+static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 };
 module_param_array(video_nr, int, NULL, 0444);
-MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)");
+MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)");
 
 /*
    Number and size of grab buffers for Video 4 Linux
@@ -153,9 +153,21 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
 MODULE_AUTHOR("Serguei Miridonov");
 MODULE_LICENSE("GPL");
 
+#define ZR_DEVICE(subven, subdev, data)	{ \
+	.vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
+	.subvendor = (subven), .subdevice = (subdev), .driver_data = (data) }
+
+static struct pci_device_id zr36067_pci_tbl[] = {
+	ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus),
+	ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus),
+	ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10),
+	ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ),
+	ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS),
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl);
 
-int zoran_num;			/* number of Buzs in use */
-struct zoran *zoran[BUZ_MAX];
+static unsigned int zoran_num;		/* number of cards found */
 
 /* videocodec bus functions ZR36060 */
 static u32
@@ -472,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = DC10plus,
 		.name = "DC10plus",
-		.vendor_id = PCI_VENDOR_ID_MIRO,
-		.device_id = PCI_DEVICE_ID_MIRO_DC10PLUS,
 		.i2c_decoder = I2C_DRIVERID_SAA7110,
 		.i2c_encoder = I2C_DRIVERID_ADV7175,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -531,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = DC30plus,
 		.name = "DC30plus",
-		.vendor_id = PCI_VENDOR_ID_MIRO,
-		.device_id = PCI_DEVICE_ID_MIRO_DC30PLUS,
 		.i2c_decoder = I2C_DRIVERID_VPX3220,
 		.i2c_encoder = I2C_DRIVERID_ADV7175,
 		.video_codec = CODEC_TYPE_ZR36050,
@@ -589,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = LML33R10,
 		.name = "LML33R10",
-		.vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH,
-		.device_id = PCI_DEVICE_ID_LML_33R10,
 		.i2c_decoder = I2C_DRIVERID_SAA7114,
 		.i2c_encoder = I2C_DRIVERID_ADV7170,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -618,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 	}, {
 		.type = BUZ,
 		.name = "Buz",
-		.vendor_id = PCI_VENDOR_ID_IOMEGA,
-		.device_id = PCI_DEVICE_ID_IOMEGA_BUZ,
 		.i2c_decoder = I2C_DRIVERID_SAA7111A,
 		.i2c_encoder = I2C_DRIVERID_SAA7185B,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -649,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = {
 		.name = "6-Eyes",
 		/* AverMedia chose not to brand the 6-Eyes. Thus it
 		   can't be autodetected, and requires card=x. */
-		.vendor_id = -1,
-		.device_id = -1,
 		.i2c_decoder = I2C_DRIVERID_KS0127,
 		.i2c_encoder = I2C_DRIVERID_BT866,
 		.video_codec = CODEC_TYPE_ZR36060,
@@ -1138,7 +1140,8 @@ zr36057_init (struct zoran *zr)
 	strcpy(zr->video_dev->name, ZR_DEVNAME(zr));
 	err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]);
 	if (err < 0)
-		goto exit_unregister;
+		goto exit_free;
+	video_set_drvdata(zr->video_dev, zr);
 
 	zoran_init_hardware(zr);
 	if (zr36067_debug > 2)
@@ -1153,19 +1156,19 @@ zr36057_init (struct zoran *zr)
 	zr->initialized = 1;
 	return 0;
 
-exit_unregister:
-	zoran_unregister_i2c(zr);
 exit_free:
 	kfree(zr->stat_com);
 	kfree(zr->video_dev);
 	return err;
 }
 
-static void
-zoran_release (struct zoran *zr)
+static void __devexit zoran_remove(struct pci_dev *pdev)
 {
+	struct zoran *zr = pci_get_drvdata(pdev);
+
 	if (!zr->initialized)
 		goto exit_free;
+
 	/* unregister videocodec bus */
 	if (zr->codec) {
 		struct videocodec_master *master = zr->codec->master_data;
@@ -1194,6 +1197,7 @@ zoran_release (struct zoran *zr)
 	pci_disable_device(zr->pci_dev);
 	video_unregister_device(zr->video_dev);
 exit_free:
+	pci_set_drvdata(pdev, NULL);
 	kfree(zr);
 }
 
@@ -1256,338 +1260,329 @@ zoran_setup_videocodec (struct zoran *zr,
  *   Scan for a Buz card (actually for the PCI controller ZR36057),
  *   request the irq and map the io memory
  */
-static int __devinit
-find_zr36057 (void)
+static int __devinit zoran_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
 {
 	unsigned char latency, need_latency;
 	struct zoran *zr;
-	struct pci_dev *dev = NULL;
 	int result;
 	struct videocodec_master *master_vfe = NULL;
 	struct videocodec_master *master_codec = NULL;
 	int card_num;
 	char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name;
+	unsigned int nr;
 
-	zoran_num = 0;
-	while (zoran_num < BUZ_MAX &&
-	       (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) {
-		card_num = card[zoran_num];
-		zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
-		if (!zr) {
-			dprintk(1,
-				KERN_ERR
-				"%s: find_zr36057() - kzalloc failed\n",
-				ZORAN_NAME);
-			continue;
-		}
-		zr->pci_dev = dev;
-		//zr->zr36057_mem = NULL;
-		zr->id = zoran_num;
-		snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
-		spin_lock_init(&zr->spinlock);
-		mutex_init(&zr->resource_lock);
-		if (pci_enable_device(dev))
-			goto zr_free_mem;
-		zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0);
-		pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION,
-				     &zr->revision);
-		if (zr->revision < 2) {
-			dprintk(1,
-				KERN_INFO
-				"%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n",
-				ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
-				zr->zr36057_adr);
 
-			if (card_num == -1) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no card specified, please use the card=X insmod option\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_mem;
-			}
-		} else {
-			int i;
-			unsigned short ss_vendor, ss_device;
+	nr = zoran_num++;
+	if (nr >= BUZ_MAX) {
+		dprintk(1,
+			KERN_ERR
+			"%s: driver limited to %d card(s) maximum\n",
+			ZORAN_NAME, BUZ_MAX);
+		return -ENOENT;
+	}
 
-			ss_vendor = zr->pci_dev->subsystem_vendor;
-			ss_device = zr->pci_dev->subsystem_device;
+	zr = kzalloc(sizeof(struct zoran), GFP_KERNEL);
+	if (!zr) {
+		dprintk(1,
+			KERN_ERR
+			"%s: find_zr36057() - kzalloc failed\n",
+			ZORAN_NAME);
+		return -ENOMEM;
+	}
+	zr->pci_dev = pdev;
+	zr->id = nr;
+	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
+	spin_lock_init(&zr->spinlock);
+	mutex_init(&zr->resource_lock);
+	if (pci_enable_device(pdev))
+		goto zr_free_mem;
+	pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
+
+	dprintk(1,
+		KERN_INFO
+		"%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n",
+		ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision,
+		zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0));
+	if (zr->revision >= 2) {
+		dprintk(1,
+			KERN_INFO
+			"%s: Subsystem vendor=0x%04x id=0x%04x\n",
+			ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor,
+			zr->pci_dev->subsystem_device);
+	}
+
+	/* Use auto-detected card type? */
+	if (card[nr] == -1) {
+		if (zr->revision < 2) {
 			dprintk(1,
-				KERN_INFO
-				"%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n",
-				ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq,
-				zr->zr36057_adr);
+				KERN_ERR
+				"%s: No card type specified, please use the card=X module parameter\n",
+				ZR_DEVNAME(zr));
 			dprintk(1,
-				KERN_INFO
-				"%s: subsystem vendor=0x%04x id=0x%04x\n",
-				ZR_DEVNAME(zr), ss_vendor, ss_device);
-			if (card_num == -1) {
-				dprintk(3,
-					KERN_DEBUG
-					"%s: find_zr36057() - trying to autodetect card type\n",
-					ZR_DEVNAME(zr));
-				for (i=0;i<NUM_CARDS;i++) {
-					if (ss_vendor == zoran_cards[i].vendor_id &&
-					    ss_device == zoran_cards[i].device_id) {
-						dprintk(3,
-							KERN_DEBUG
-							"%s: find_zr36057() - card %s detected\n",
-							ZR_DEVNAME(zr),
-							zoran_cards[i].name);
-						card_num = i;
-						break;
-					}
-				}
-				if (i == NUM_CARDS) {
-					dprintk(1,
-						KERN_ERR
-						"%s: find_zr36057() - unknown card\n",
-						ZR_DEVNAME(zr));
-					goto zr_free_mem;
-				}
-			}
-		}
-
-		if (card_num < 0 || card_num >= NUM_CARDS) {
-			dprintk(2,
 				KERN_ERR
-				"%s: find_zr36057() - invalid cardnum %d\n",
-				ZR_DEVNAME(zr), card_num);
+				"%s: It is not possible to auto-detect ZR36057 based cards\n",
+				ZR_DEVNAME(zr));
 			goto zr_free_mem;
 		}
 
-		/* even though we make this a non pointer and thus
-		 * theoretically allow for making changes to this struct
-		 * on a per-individual card basis at runtime, this is
-		 * strongly discouraged. This structure is intended to
-		 * keep general card information, no settings or anything */
-		zr->card = zoran_cards[card_num];
-		snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
-			 "%s[%u]", zr->card.name, zr->id);
-
-		zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000);
-		if (!zr->zr36057_mem) {
+		card_num = ent->driver_data;
+		if (card_num >= NUM_CARDS) {
 			dprintk(1,
 				KERN_ERR
-				"%s: find_zr36057() - ioremap failed\n",
+				"%s: Unknown card, try specifying card=X module parameter\n",
 				ZR_DEVNAME(zr));
 			goto zr_free_mem;
 		}
-
-		result = request_irq(zr->pci_dev->irq,
-				     zoran_irq,
-				     IRQF_SHARED | IRQF_DISABLED,
-				     ZR_DEVNAME(zr),
-				     (void *) zr);
-		if (result < 0) {
-			if (result == -EINVAL) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - bad irq number or handler\n",
-					ZR_DEVNAME(zr));
-			} else if (result == -EBUSY) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
-					ZR_DEVNAME(zr), zr->pci_dev->irq);
-			} else {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - can't assign irq, error code %d\n",
-					ZR_DEVNAME(zr), result);
-			}
-			goto zr_unmap;
-		}
-
-		/* set PCI latency timer */
-		pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
-				     &latency);
-		need_latency = zr->revision > 1 ? 32 : 48;
-		if (latency != need_latency) {
-			dprintk(2,
-				KERN_INFO
-				"%s: Changing PCI latency from %d to %d.\n",
-				ZR_DEVNAME(zr), latency, need_latency);
-			pci_write_config_byte(zr->pci_dev,
-					      PCI_LATENCY_TIMER,
-					      need_latency);
+		dprintk(3,
+			KERN_DEBUG
+			"%s: %s() - card %s detected\n",
+			ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name);
+	} else {
+		card_num = card[nr];
+		if (card_num >= NUM_CARDS || card_num < 0) {
+			dprintk(1,
+				KERN_ERR
+				"%s: User specified card type %d out of range (0 .. %d)\n",
+				ZR_DEVNAME(zr), card_num, NUM_CARDS - 1);
+			goto zr_free_mem;
 		}
+	}
 
-		zr36057_restart(zr);
-		/* i2c */
-		dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
-			ZR_DEVNAME(zr));
+	/* even though we make this a non pointer and thus
+	 * theoretically allow for making changes to this struct
+	 * on a per-individual card basis at runtime, this is
+	 * strongly discouraged. This structure is intended to
+	 * keep general card information, no settings or anything */
+	zr->card = zoran_cards[card_num];
+	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)),
+		 "%s[%u]", zr->card.name, zr->id);
+
+	zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0);
+	if (!zr->zr36057_mem) {
+		dprintk(1,
+			KERN_ERR
+			"%s: %s() - ioremap failed\n",
+			ZR_DEVNAME(zr), __func__);
+		goto zr_free_mem;
+	}
 
-		/* i2c decoder */
-		if (decoder[zr->id] != -1) {
-			i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
-			zr->card.i2c_decoder = decoder[zr->id];
-		} else if (zr->card.i2c_decoder != 0) {
-			i2c_dec_name =
-				i2cid_to_modulename(zr->card.i2c_decoder);
+	result = request_irq(zr->pci_dev->irq, zoran_irq,
+			     IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr);
+	if (result < 0) {
+		if (result == -EINVAL) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - bad irq number or handler\n",
+				ZR_DEVNAME(zr));
+		} else if (result == -EBUSY) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n",
+				ZR_DEVNAME(zr), zr->pci_dev->irq);
 		} else {
-			i2c_dec_name = NULL;
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - can't assign irq, error code %d\n",
+				ZR_DEVNAME(zr), result);
 		}
+		goto zr_unmap;
+	}
 
-		if (i2c_dec_name) {
-			if ((result = request_module(i2c_dec_name)) < 0) {
-				dprintk(1,
-					KERN_ERR
-					"%s: failed to load module %s: %d\n",
-					ZR_DEVNAME(zr), i2c_dec_name, result);
-			}
-		}
+	/* set PCI latency timer */
+	pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+			     &latency);
+	need_latency = zr->revision > 1 ? 32 : 48;
+	if (latency != need_latency) {
+		dprintk(2,
+			KERN_INFO
+			"%s: Changing PCI latency from %d to %d\n",
+			ZR_DEVNAME(zr), latency, need_latency);
+		pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER,
+				      need_latency);
+	}
 
-		/* i2c encoder */
-		if (encoder[zr->id] != -1) {
-			i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
-			zr->card.i2c_encoder = encoder[zr->id];
-		} else if (zr->card.i2c_encoder != 0) {
-			i2c_enc_name =
-				i2cid_to_modulename(zr->card.i2c_encoder);
-		} else {
-			i2c_enc_name = NULL;
-		}
+	zr36057_restart(zr);
+	/* i2c */
+	dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n",
+		ZR_DEVNAME(zr));
+
+	/* i2c decoder */
+	if (decoder[zr->id] != -1) {
+		i2c_dec_name = i2cid_to_modulename(decoder[zr->id]);
+		zr->card.i2c_decoder = decoder[zr->id];
+	} else if (zr->card.i2c_decoder != 0) {
+		i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder);
+	} else {
+		i2c_dec_name = NULL;
+	}
 
-		if (i2c_enc_name) {
-			if ((result = request_module(i2c_enc_name)) < 0) {
-				dprintk(1,
-					KERN_ERR
-					"%s: failed to load module %s: %d\n",
-					ZR_DEVNAME(zr), i2c_enc_name, result);
-			}
+	if (i2c_dec_name) {
+		result = request_module(i2c_dec_name);
+		if (result < 0) {
+			dprintk(1,
+				KERN_ERR
+				"%s: failed to load module %s: %d\n",
+				ZR_DEVNAME(zr), i2c_dec_name, result);
 		}
+	}
+
+	/* i2c encoder */
+	if (encoder[zr->id] != -1) {
+		i2c_enc_name = i2cid_to_modulename(encoder[zr->id]);
+		zr->card.i2c_encoder = encoder[zr->id];
+	} else if (zr->card.i2c_encoder != 0) {
+		i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder);
+	} else {
+		i2c_enc_name = NULL;
+	}
 
-		if (zoran_register_i2c(zr) < 0) {
+	if (i2c_enc_name) {
+		result = request_module(i2c_enc_name);
+		if (result < 0) {
 			dprintk(1,
 				KERN_ERR
-				"%s: find_zr36057() - can't initialize i2c bus\n",
-				ZR_DEVNAME(zr));
-			goto zr_free_irq;
+				"%s: failed to load module %s: %d\n",
+				ZR_DEVNAME(zr), i2c_enc_name, result);
 		}
+	}
 
-		dprintk(2,
-			KERN_INFO "%s: Initializing videocodec bus...\n",
+	if (zoran_register_i2c(zr) < 0) {
+		dprintk(1,
+			KERN_ERR
+			"%s: find_zr36057() - can't initialize i2c bus\n",
 			ZR_DEVNAME(zr));
+		goto zr_free_irq;
+	}
 
-		if (zr->card.video_codec != 0 &&
-		    (codec_name =
-		     codecid_to_modulename(zr->card.video_codec)) != NULL) {
-			if ((result = request_module(codec_name)) < 0) {
+	dprintk(2,
+		KERN_INFO "%s: Initializing videocodec bus...\n",
+		ZR_DEVNAME(zr));
+
+	if (zr->card.video_codec) {
+		codec_name = codecid_to_modulename(zr->card.video_codec);
+		if (codec_name) {
+			result = request_module(codec_name);
+			if (result) {
 				dprintk(1,
 					KERN_ERR
 					"%s: failed to load modules %s: %d\n",
 					ZR_DEVNAME(zr), codec_name, result);
 			}
 		}
-		if (zr->card.video_vfe != 0 &&
-		    (vfe_name =
-		     codecid_to_modulename(zr->card.video_vfe)) != NULL) {
-			if ((result = request_module(vfe_name)) < 0) {
+	}
+	if (zr->card.video_vfe) {
+		vfe_name = codecid_to_modulename(zr->card.video_vfe);
+		if (vfe_name) {
+			result = request_module(vfe_name);
+			if (result < 0) {
 				dprintk(1,
 					KERN_ERR
 					"%s: failed to load modules %s: %d\n",
 					ZR_DEVNAME(zr), vfe_name, result);
 			}
 		}
+	}
 
-		/* reset JPEG codec */
-		jpeg_codec_sleep(zr, 1);
-		jpeg_codec_reset(zr);
-		/* video bus enabled */
-		/* display codec revision */
-		if (zr->card.video_codec != 0) {
-			master_codec = zoran_setup_videocodec(zr,
-							      zr->card.video_codec);
-			if (!master_codec)
-				goto zr_unreg_i2c;
-			zr->codec = videocodec_attach(master_codec);
-			if (!zr->codec) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no codec found\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_codec;
-			}
-			if (zr->codec->type != zr->card.video_codec) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - wrong codec\n",
-					ZR_DEVNAME(zr));
-				goto zr_detach_codec;
-			}
+	/* reset JPEG codec */
+	jpeg_codec_sleep(zr, 1);
+	jpeg_codec_reset(zr);
+	/* video bus enabled */
+	/* display codec revision */
+	if (zr->card.video_codec != 0) {
+		master_codec = zoran_setup_videocodec(zr, zr->card.video_codec);
+		if (!master_codec)
+			goto zr_unreg_i2c;
+		zr->codec = videocodec_attach(master_codec);
+		if (!zr->codec) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - no codec found\n",
+				ZR_DEVNAME(zr));
+			goto zr_free_codec;
 		}
-		if (zr->card.video_vfe != 0) {
-			master_vfe = zoran_setup_videocodec(zr,
-							    zr->card.video_vfe);
-			if (!master_vfe)
-				goto zr_detach_codec;
-			zr->vfe = videocodec_attach(master_vfe);
-			if (!zr->vfe) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() - no VFE found\n",
-					ZR_DEVNAME(zr));
-				goto zr_free_vfe;
-			}
-			if (zr->vfe->type != zr->card.video_vfe) {
-				dprintk(1,
-					KERN_ERR
-					"%s: find_zr36057() = wrong VFE\n",
-					ZR_DEVNAME(zr));
-				goto zr_detach_vfe;
-			}
+		if (zr->codec->type != zr->card.video_codec) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - wrong codec\n",
+				ZR_DEVNAME(zr));
+			goto zr_detach_codec;
+		}
+	}
+	if (zr->card.video_vfe != 0) {
+		master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe);
+		if (!master_vfe)
+			goto zr_detach_codec;
+		zr->vfe = videocodec_attach(master_vfe);
+		if (!zr->vfe) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() - no VFE found\n",
+				ZR_DEVNAME(zr));
+			goto zr_free_vfe;
+		}
+		if (zr->vfe->type != zr->card.video_vfe) {
+			dprintk(1,
+				KERN_ERR
+				"%s: find_zr36057() = wrong VFE\n",
+				ZR_DEVNAME(zr));
+			goto zr_detach_vfe;
 		}
-		/* Success so keep the pci_dev referenced */
-		pci_dev_get(zr->pci_dev);
-		zoran[zoran_num++] = zr;
-		continue;
-
-		// Init errors
-	      zr_detach_vfe:
-		videocodec_detach(zr->vfe);
-	      zr_free_vfe:
-		kfree(master_vfe);
-	      zr_detach_codec:
-		videocodec_detach(zr->codec);
-	      zr_free_codec:
-		kfree(master_codec);
-	      zr_unreg_i2c:
-		zoran_unregister_i2c(zr);
-	      zr_free_irq:
-		btwrite(0, ZR36057_SPGPPCR);
-		free_irq(zr->pci_dev->irq, zr);
-	      zr_unmap:
-		iounmap(zr->zr36057_mem);
-	      zr_free_mem:
-		kfree(zr);
-		continue;
 	}
-	if (dev)	/* Clean up ref count on early exit */
-		pci_dev_put(dev);
 
-	if (zoran_num == 0) {
-		dprintk(1, KERN_INFO "No known MJPEG cards found.\n");
+	/* take care of Natoma chipset and a revision 1 zr36057 */
+	if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
+		zr->jpg_buffers.need_contiguous = 1;
+		dprintk(1,
+			KERN_INFO
+			"%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
+			ZR_DEVNAME(zr));
 	}
-	return zoran_num;
+
+	if (zr36057_init(zr) < 0)
+		goto zr_detach_vfe;
+
+	zoran_proc_init(zr);
+
+	pci_set_drvdata(pdev, zr);
+
+	return 0;
+
+zr_detach_vfe:
+	videocodec_detach(zr->vfe);
+zr_free_vfe:
+	kfree(master_vfe);
+zr_detach_codec:
+	videocodec_detach(zr->codec);
+zr_free_codec:
+	kfree(master_codec);
+zr_unreg_i2c:
+	zoran_unregister_i2c(zr);
+zr_free_irq:
+	btwrite(0, ZR36057_SPGPPCR);
+	free_irq(zr->pci_dev->irq, zr);
+zr_unmap:
+	iounmap(zr->zr36057_mem);
+zr_free_mem:
+	kfree(zr);
+
+	return -ENODEV;
 }
 
-static int __init
-init_dc10_cards (void)
+static struct pci_driver zoran_driver = {
+	.name = "zr36067",
+	.id_table = zr36067_pci_tbl,
+	.probe = zoran_probe,
+	.remove = zoran_remove,
+};
+
+static int __init zoran_init(void)
 {
-	int i;
+	int res;
 
-	memset(zoran, 0, sizeof(zoran));
 	printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n",
 	       MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION);
 
-	/* Look for cards */
-	if (find_zr36057() < 0) {
-		return -EIO;
-	}
-	if (zoran_num == 0)
-		return -ENODEV;
-	dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME,
-		zoran_num);
 	/* check the parameters we have been given, adjust if necessary */
 	if (v4l_nbufs < 2)
 		v4l_nbufs = 2;
@@ -1629,37 +1624,22 @@ init_dc10_cards (void)
 			ZORAN_NAME);
 	}
 
-	/* take care of Natoma chipset and a revision 1 zr36057 */
-	for (i = 0; i < zoran_num; i++) {
-		struct zoran *zr = zoran[i];
-
-		if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
-			zr->jpg_buffers.need_contiguous = 1;
-			dprintk(1,
-				KERN_INFO
-				"%s: ZR36057/Natoma bug, max. buffer size is 128K\n",
-				ZR_DEVNAME(zr));
-		}
-
-		if (zr36057_init(zr) < 0) {
-			for (i = 0; i < zoran_num; i++)
-				zoran_release(zoran[i]);
-			return -EIO;
-		}
-		zoran_proc_init(zr);
+	res = pci_register_driver(&zoran_driver);
+	if (res) {
+		dprintk(1,
+			KERN_ERR
+			"%s: Unable to register ZR36057 driver\n",
+			ZORAN_NAME);
+		return res;
 	}
 
 	return 0;
 }
 
-static void __exit
-unload_dc10_cards (void)
+static void __exit zoran_exit(void)
 {
-	int i;
-
-	for (i = 0; i < zoran_num; i++)
-		zoran_release(zoran[i]);
+	pci_unregister_driver(&zoran_driver);
 }
 
-module_init(init_dc10_cards);
-module_exit(unload_dc10_cards);
+module_init(zoran_init);
+module_exit(zoran_exit);
diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h
index e4dc9d2..4507bdc 100644
--- a/drivers/media/video/zoran/zoran_card.h
+++ b/drivers/media/video/zoran/zoran_card.h
@@ -40,8 +40,6 @@ extern int zr36067_debug;
 
 /* Anybody who uses more than four? */
 #define BUZ_MAX 4
-extern int zoran_num;
-extern struct zoran *zoran[BUZ_MAX];
 
 extern struct video_device zoran_template;
 
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index b58b9dd..120ef23 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1196,83 +1196,54 @@ zoran_close_end_session (struct file *file)
  *   Open a zoran card. Right now the flags stuff is just playing
  */
 
-static int
-zoran_open(struct file  *file)
+static int zoran_open(struct file *file)
 {
-	unsigned int minor = video_devdata(file)->minor;
-	struct zoran *zr = NULL;
+	struct zoran *zr = video_drvdata(file);
 	struct zoran_fh *fh;
-	int i, res, first_open = 0, have_module_locks = 0;
+	int res, first_open = 0;
 
-	lock_kernel();
-	/* find the device */
-	for (i = 0; i < zoran_num; i++) {
-		if (zoran[i]->video_dev->minor == minor) {
-			zr = zoran[i];
-			break;
-		}
-	}
+	dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
+		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1);
 
-	if (!zr) {
-		dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME);
-		res = -ENODEV;
-		goto open_unlock_and_return;
-	}
+	lock_kernel();
 
 	/* see fs/device.c - the kernel already locks during open(),
 	 * so locking ourselves only causes deadlocks */
 	/*mutex_lock(&zr->resource_lock);*/
 
+	if (zr->user >= 2048) {
+		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
+			ZR_DEVNAME(zr), zr->user);
+		res = -EBUSY;
+		goto fail_unlock;
+	}
+
 	if (!zr->decoder) {
 		dprintk(1,
 			KERN_ERR "%s: no TV decoder loaded for device!\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		goto open_unlock_and_return;
+		goto fail_unlock;
 	}
 
-	/* try to grab a module lock */
-	if (!try_module_get(THIS_MODULE)) {
-		dprintk(1,
-			KERN_ERR
-			"%s: failed to acquire my own lock! PANIC!\n",
-			ZR_DEVNAME(zr));
-		res = -ENODEV;
-		goto open_unlock_and_return;
-	}
 	if (!try_module_get(zr->decoder->driver->driver.owner)) {
 		dprintk(1,
 			KERN_ERR
-			"%s: failed to grab ownership of i2c decoder\n",
+			"%s: failed to grab ownership of video decoder\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		module_put(THIS_MODULE);
-		goto open_unlock_and_return;
+		goto fail_unlock;
 	}
 	if (zr->encoder &&
 	    !try_module_get(zr->encoder->driver->driver.owner)) {
 		dprintk(1,
 			KERN_ERR
-			"%s: failed to grab ownership of i2c encoder\n",
+			"%s: failed to grab ownership of video encoder\n",
 			ZR_DEVNAME(zr));
 		res = -EIO;
-		module_put(zr->decoder->driver->driver.owner);
-		module_put(THIS_MODULE);
-		goto open_unlock_and_return;
+		goto fail_decoder;
 	}
 
-	have_module_locks = 1;
-
-	if (zr->user >= 2048) {
-		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
-			ZR_DEVNAME(zr), zr->user);
-		res = -EBUSY;
-		goto open_unlock_and_return;
-	}
-
-	dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n",
-		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
-
 	/* now, create the open()-specific file_ops struct */
 	fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL);
 	if (!fh) {
@@ -1281,7 +1252,7 @@ zoran_open(struct file  *file)
 			"%s: zoran_open() - allocation of zoran_fh failed\n",
 			ZR_DEVNAME(zr));
 		res = -ENOMEM;
-		goto open_unlock_and_return;
+		goto fail_encoder;
 	}
 	/* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows
 	 * on norm-change! */
@@ -1292,9 +1263,8 @@ zoran_open(struct file  *file)
 			KERN_ERR
 			"%s: zoran_open() - allocation of overlay_mask failed\n",
 			ZR_DEVNAME(zr));
-		kfree(fh);
 		res = -ENOMEM;
-		goto open_unlock_and_return;
+		goto fail_fh;
 	}
 
 	if (zr->user++ == 0)
@@ -1319,22 +1289,19 @@ zoran_open(struct file  *file)
 
 	return 0;
 
-open_unlock_and_return:
-	/* if we grabbed locks, release them accordingly */
-	if (have_module_locks) {
-		module_put(zr->decoder->driver->driver.owner);
-		if (zr->encoder) {
-			module_put(zr->encoder->driver->driver.owner);
-		}
-		module_put(THIS_MODULE);
-	}
-
-	/* if there's no device found, we didn't obtain the lock either */
-	if (zr) {
-		/*mutex_unlock(&zr->resource_lock);*/
-	}
+fail_fh:
+	kfree(fh);
+fail_encoder:
+	if (zr->encoder)
+		module_put(zr->encoder->driver->driver.owner);
+fail_decoder:
+	module_put(zr->decoder->driver->driver.owner);
+fail_unlock:
 	unlock_kernel();
 
+	dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
+		ZR_DEVNAME(zr), res, zr->user);
+
 	return res;
 }
 
@@ -1344,8 +1311,8 @@ zoran_close(struct file  *file)
 	struct zoran_fh *fh = file->private_data;
 	struct zoran *zr = fh->zr;
 
-	dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
-		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user);
+	dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n",
+		ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1);
 
 	/* kernel locks (fs/device.c), so don't do that ourselves
 	 * (prevents deadlocks) */
@@ -1391,10 +1358,8 @@ zoran_close(struct file  *file)
 
 	/* release locks on the i2c modules */
 	module_put(zr->decoder->driver->driver.owner);
-	if (zr->encoder) {
-		 module_put(zr->encoder->driver->driver.owner);
-	}
-	module_put(THIS_MODULE);
+	if (zr->encoder)
+		module_put(zr->encoder->driver->driver.owner);
 
 	/*mutex_unlock(&zr->resource_lock);*/
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0efa390..99d4b28 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -145,6 +145,16 @@ config MMC_IMX
 
 	  If unsure, say N.
 
+config MMC_MXC
+	tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+	depends on ARCH_MXC
+	help
+	  This selects the Freescale i.MX2/3 Multimedia card Interface.
+	  If you have a i.MX platform with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_TIFM_SD
 	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 98cab84..dedec55 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,6 +9,7 @@ endif
 obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
+obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1bcbdd6..2909bbc8 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
+		if (host->hw_designer == 0x80)
+			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 	}
 
@@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		break;
 	case MMC_POWER_UP:
-		pwr |= MCI_PWR_UP;
-		break;
+		/* The ST version does not have this, fall through to POWER_ON */
+		if (host->hw_designer != 0x80) {
+			pwr |= MCI_PWR_UP;
+			break;
+		}
 	case MMC_POWER_ON:
 		pwr |= MCI_PWR_ON;
 		break;
 	}
 
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		pwr |= MCI_ROD;
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+		if (host->hw_designer != 0x80)
+			pwr |= MCI_ROD;
+		else {
+			/*
+			 * The ST Micro variant use the ROD bit for something
+			 * else and only has OD (Open Drain).
+			 */
+			pwr |= MCI_OD;
+		}
+	}
 
 	writel(clk, host->base + MMCICLOCK);
 
@@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	}
 
 	host = mmc_priv(mmc);
+	/* Bits 12 thru 19 is the designer */
+	host->hw_designer = (dev->periphid >> 12) & 0xff;
+	/* Bits 20 thru 23 is the revison */
+	host->hw_revision = (dev->periphid >> 20) & 0xf;
+	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+	DBG(host, "revision = 0x%01x\n", host->hw_revision);
 	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
@@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = {
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
 	},
+	/* ST Micro variants */
+	{
+		.id     = 0x00180180,
+		.mask   = 0x00ffffff,
+	},
+	{
+		.id     = 0x00280180,
+		.mask   = 0x00ffffff,
+	},
 	{ 0, 0 },
 };
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0f39c49..0441bac 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,13 +11,23 @@
 #define MCI_PWR_OFF		0x00
 #define MCI_PWR_UP		0x02
 #define MCI_PWR_ON		0x03
+#define MCI_DATA2DIREN		(1 << 2)
+#define MCI_CMDDIREN		(1 << 3)
+#define MCI_DATA0DIREN		(1 << 4)
+#define MCI_DATA31DIREN		(1 << 5)
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
+/* The ST Micro version does not have ROD */
+#define MCI_FBCLKEN		(1 << 7)
+#define MCI_DATA74DIREN		(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
 #define MCI_CLK_PWRSAVE		(1 << 9)
 #define MCI_CLK_BYPASS		(1 << 10)
+#define MCI_WIDE_BUS		(1 << 11)
+/* HW flow control on the ST Micro version */
+#define MCI_FCEN		(1 << 13)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -26,6 +36,10 @@
 #define MCI_CPSM_INTERRUPT	(1 << 8)
 #define MCI_CPSM_PENDING	(1 << 9)
 #define MCI_CPSM_ENABLE		(1 << 10)
+#define MCI_SDIO_SUSP		(1 << 11)
+#define MCI_ENCMD_COMPL		(1 << 12)
+#define MCI_NIEN		(1 << 13)
+#define MCI_CE_ATACMD		(1 << 14)
 
 #define MMCIRESPCMD		0x010
 #define MMCIRESPONSE0		0x014
@@ -39,6 +53,11 @@
 #define MCI_DPSM_DIRECTION	(1 << 1)
 #define MCI_DPSM_MODE		(1 << 2)
 #define MCI_DPSM_DMAENABLE	(1 << 3)
+#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+#define MCI_DPSM_RWSTART	(1 << 8)
+#define MCI_DPSM_RWSTOP		(1 << 9)
+#define MCI_DPSM_RWMOD		(1 << 10)
+#define MCI_DPSM_SDIOEN		(1 << 11)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034
@@ -63,6 +82,8 @@
 #define MCI_RXFIFOEMPTY		(1 << 19)
 #define MCI_TXDATAAVLBL		(1 << 20)
 #define MCI_RXDATAAVLBL		(1 << 21)
+#define MCI_SDIOIT		(1 << 22)
+#define MCI_CEATAEND		(1 << 23)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -75,6 +96,8 @@
 #define MCI_CMDSENTCLR		(1 << 7)
 #define MCI_DATAENDCLR		(1 << 8)
 #define MCI_DATABLOCKENDCLR	(1 << 10)
+#define MCI_SDIOITC		(1 << 22)
+#define MCI_CEATAENDC		(1 << 23)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
@@ -98,6 +121,8 @@
 #define MCI_RXFIFOEMPTYMASK	(1 << 19)
 #define MCI_TXDATAAVLBLMASK	(1 << 20)
 #define MCI_RXDATAAVLBLMASK	(1 << 21)
+#define MCI_SDIOITMASK		(1 << 22)
+#define MCI_CEATAENDMASK	(1 << 23)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048
@@ -136,6 +161,9 @@ struct mmci_host {
 	u32			pwr;
 	struct mmc_platform_data *plat;
 
+	u8			hw_designer;
+	u8			hw_revision:4;
+
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
new file mode 100644
index 0000000..dda0be4
--- /dev/null
+++ b/drivers/mmc/host/mxcmmc.c
@@ -0,0 +1,880 @@
+/*
+ *  linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
+ *
+ *  This is a driver for the SDHC controller found in Freescale MX2/MX3
+ *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
+ *  Unlike the hardware found on MX1, this hardware just works and does
+ *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ *  derived from pxamci.c by Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <mach/mmc.h>
+
+#ifdef CONFIG_ARCH_MX2
+#include <mach/dma-mx1-mx2.h>
+#define HAS_DMA
+#endif
+
+#define DRIVER_NAME "imx-mmc"
+
+#define MMC_REG_STR_STP_CLK		0x00
+#define MMC_REG_STATUS			0x04
+#define MMC_REG_CLK_RATE		0x08
+#define MMC_REG_CMD_DAT_CONT		0x0C
+#define MMC_REG_RES_TO			0x10
+#define MMC_REG_READ_TO			0x14
+#define MMC_REG_BLK_LEN			0x18
+#define MMC_REG_NOB			0x1C
+#define MMC_REG_REV_NO			0x20
+#define MMC_REG_INT_CNTR		0x24
+#define MMC_REG_CMD			0x28
+#define MMC_REG_ARG			0x2C
+#define MMC_REG_RES_FIFO		0x34
+#define MMC_REG_BUFFER_ACCESS		0x38
+
+#define STR_STP_CLK_RESET               (1 << 3)
+#define STR_STP_CLK_START_CLK           (1 << 1)
+#define STR_STP_CLK_STOP_CLK            (1 << 0)
+
+#define STATUS_CARD_INSERTION		(1 << 31)
+#define STATUS_CARD_REMOVAL		(1 << 30)
+#define STATUS_YBUF_EMPTY		(1 << 29)
+#define STATUS_XBUF_EMPTY		(1 << 28)
+#define STATUS_YBUF_FULL		(1 << 27)
+#define STATUS_XBUF_FULL		(1 << 26)
+#define STATUS_BUF_UND_RUN		(1 << 25)
+#define STATUS_BUF_OVFL			(1 << 24)
+#define STATUS_SDIO_INT_ACTIVE		(1 << 14)
+#define STATUS_END_CMD_RESP		(1 << 13)
+#define STATUS_WRITE_OP_DONE		(1 << 12)
+#define STATUS_DATA_TRANS_DONE		(1 << 11)
+#define STATUS_READ_OP_DONE		(1 << 11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK	(3 << 10)
+#define STATUS_CARD_BUS_CLK_RUN		(1 << 8)
+#define STATUS_BUF_READ_RDY		(1 << 7)
+#define STATUS_BUF_WRITE_RDY		(1 << 6)
+#define STATUS_RESP_CRC_ERR		(1 << 5)
+#define STATUS_CRC_READ_ERR		(1 << 3)
+#define STATUS_CRC_WRITE_ERR		(1 << 2)
+#define STATUS_TIME_OUT_RESP		(1 << 1)
+#define STATUS_TIME_OUT_READ		(1 << 0)
+#define STATUS_ERR_MASK			0x2f
+
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF	(1 << 12)
+#define CMD_DAT_CONT_STOP_READWAIT	(1 << 11)
+#define CMD_DAT_CONT_START_READWAIT	(1 << 10)
+#define CMD_DAT_CONT_BUS_WIDTH_4	(2 << 8)
+#define CMD_DAT_CONT_INIT		(1 << 7)
+#define CMD_DAT_CONT_WRITE		(1 << 4)
+#define CMD_DAT_CONT_DATA_ENABLE	(1 << 3)
+#define CMD_DAT_CONT_RESPONSE_48BIT_CRC	(1 << 0)
+#define CMD_DAT_CONT_RESPONSE_136BIT	(2 << 0)
+#define CMD_DAT_CONT_RESPONSE_48BIT	(3 << 0)
+
+#define INT_SDIO_INT_WKP_EN		(1 << 18)
+#define INT_CARD_INSERTION_WKP_EN	(1 << 17)
+#define INT_CARD_REMOVAL_WKP_EN		(1 << 16)
+#define INT_CARD_INSERTION_EN		(1 << 15)
+#define INT_CARD_REMOVAL_EN		(1 << 14)
+#define INT_SDIO_IRQ_EN			(1 << 13)
+#define INT_DAT0_EN			(1 << 12)
+#define INT_BUF_READ_EN			(1 << 4)
+#define INT_BUF_WRITE_EN		(1 << 3)
+#define INT_END_CMD_RES_EN		(1 << 2)
+#define INT_WRITE_OP_DONE_EN		(1 << 1)
+#define INT_READ_OP_EN			(1 << 0)
+
+struct mxcmci_host {
+	struct mmc_host		*mmc;
+	struct resource		*res;
+	void __iomem		*base;
+	int			irq;
+	int			detect_irq;
+	int			dma;
+	int			do_dma;
+	unsigned int		power_mode;
+	struct imxmmc_platform_data *pdata;
+
+	struct mmc_request	*req;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	unsigned int		dma_nents;
+	unsigned int		datasize;
+	unsigned int		dma_dir;
+
+	u16			rev_no;
+	unsigned int		cmdat;
+
+	struct clk		*clk;
+
+	int			clock;
+
+	struct work_struct	datawork;
+};
+
+static inline int mxcmci_use_dma(struct mxcmci_host *host)
+{
+	return host->do_dma;
+}
+
+static void mxcmci_softreset(struct mxcmci_host *host)
+{
+	int i;
+
+	/* reset sequence */
+	writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
+	writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
+			host->base + MMC_REG_STR_STP_CLK);
+
+	for (i = 0; i < 8; i++)
+		writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+
+	writew(0xff, host->base + MMC_REG_RES_TO);
+}
+
+static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+{
+	unsigned int nob = data->blocks;
+	unsigned int blksz = data->blksz;
+	unsigned int datasize = nob * blksz;
+#ifdef HAS_DMA
+	struct scatterlist *sg;
+	int i;
+#endif
+	if (data->flags & MMC_DATA_STREAM)
+		nob = 0xffff;
+
+	host->data = data;
+	data->bytes_xfered = 0;
+
+	writew(nob, host->base + MMC_REG_NOB);
+	writew(blksz, host->base + MMC_REG_BLK_LEN);
+	host->datasize = datasize;
+
+#ifdef HAS_DMA
+	for_each_sg(data->sg, sg, data->sg_len, i) {
+		if (sg->offset & 3 || sg->length & 3) {
+			host->do_dma = 0;
+			return;
+		}
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					     data->sg_len,  host->dma_dir);
+
+		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_READ);
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					     data->sg_len,  host->dma_dir);
+
+		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_WRITE);
+	}
+
+	wmb();
+
+	imx_dma_enable(host->dma);
+#endif /* HAS_DMA */
+}
+
+static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
+		unsigned int cmdat)
+{
+	WARN_ON(host->cmd != NULL);
+	host->cmd = cmd;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1: /* short CRC, OPCODE */
+	case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
+		break;
+	case MMC_RSP_R2: /* long 136 bit + CRC */
+		cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
+		break;
+	case MMC_RSP_R3: /* short */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
+		break;
+	case MMC_RSP_NONE:
+		break;
+	default:
+		dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
+				mmc_resp_type(cmd));
+		cmd->error = -EINVAL;
+		return -EINVAL;
+	}
+
+	if (mxcmci_use_dma(host))
+		writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN |
+				INT_END_CMD_RES_EN,
+				host->base + MMC_REG_INT_CNTR);
+	else
+		writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR);
+
+	writew(cmd->opcode, host->base + MMC_REG_CMD);
+	writel(cmd->arg, host->base + MMC_REG_ARG);
+	writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
+
+	return 0;
+}
+
+static void mxcmci_finish_request(struct mxcmci_host *host,
+		struct mmc_request *req)
+{
+	writel(0, host->base + MMC_REG_INT_CNTR);
+
+	host->req = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	mmc_request_done(host->mmc, req);
+}
+
+static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+	int data_error;
+
+#ifdef HAS_DMA
+	if (mxcmci_use_dma(host)) {
+		imx_dma_disable(host->dma);
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
+				host->dma_dir);
+	}
+#endif
+
+	if (stat & STATUS_ERR_MASK) {
+		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
+				stat);
+		if (stat & STATUS_CRC_READ_ERR) {
+			data->error = -EILSEQ;
+		} else if (stat & STATUS_CRC_WRITE_ERR) {
+			u32 err_code = (stat >> 9) & 0x3;
+			if (err_code == 2) /* No CRC response */
+				data->error = -ETIMEDOUT;
+			else
+				data->error = -EILSEQ;
+		} else if (stat & STATUS_TIME_OUT_READ) {
+			data->error = -ETIMEDOUT;
+		} else {
+			data->error = -EIO;
+		}
+	} else {
+		data->bytes_xfered = host->datasize;
+	}
+
+	data_error = data->error;
+
+	host->data = NULL;
+
+	return data_error;
+}
+
+static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int i;
+	u32 a, b, c;
+
+	if (!cmd)
+		return;
+
+	if (stat & STATUS_TIME_OUT_RESP) {
+		dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
+		cmd->error = -ETIMEDOUT;
+	} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+		dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
+		cmd->error = -EILSEQ;
+	}
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			for (i = 0; i < 4; i++) {
+				a = readw(host->base + MMC_REG_RES_FIFO);
+				b = readw(host->base + MMC_REG_RES_FIFO);
+				cmd->resp[i] = a << 16 | b;
+			}
+		} else {
+			a = readw(host->base + MMC_REG_RES_FIFO);
+			b = readw(host->base + MMC_REG_RES_FIFO);
+			c = readw(host->base + MMC_REG_RES_FIFO);
+			cmd->resp[0] = a << 24 | b << 8 | c >> 8;
+		}
+	}
+}
+
+static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
+{
+	u32 stat;
+	unsigned long timeout = jiffies + HZ;
+
+	do {
+		stat = readl(host->base + MMC_REG_STATUS);
+		if (stat & STATUS_ERR_MASK)
+			return stat;
+		if (time_after(jiffies, timeout))
+			return STATUS_TIME_OUT_READ;
+		if (stat & mask)
+			return 0;
+		cpu_relax();
+	} while (1);
+}
+
+static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		*buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
+		memcpy(b, &tmp, bytes);
+	}
+
+	return 0;
+}
+
+static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+		writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+
+		memcpy(&tmp, b, bytes);
+		writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
+	}
+
+	stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+	if (stat)
+		return stat;
+
+	return 0;
+}
+
+static int mxcmci_transfer_data(struct mxcmci_host *host)
+{
+	struct mmc_data *data = host->req->data;
+	struct scatterlist *sg;
+	int stat, i;
+
+	host->datasize = 0;
+
+	host->data = data;
+	host->datasize = 0;
+
+	if (data->flags & MMC_DATA_READ) {
+		for_each_sg(data->sg, sg, data->sg_len, i) {
+			stat = mxcmci_pull(host, sg_virt(sg), sg->length);
+			if (stat)
+				return stat;
+			host->datasize += sg->length;
+		}
+	} else {
+		for_each_sg(data->sg, sg, data->sg_len, i) {
+			stat = mxcmci_push(host, sg_virt(sg), sg->length);
+			if (stat)
+				return stat;
+			host->datasize += sg->length;
+		}
+		stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
+		if (stat)
+			return stat;
+	}
+	return 0;
+}
+
+static void mxcmci_datawork(struct work_struct *work)
+{
+	struct mxcmci_host *host = container_of(work, struct mxcmci_host,
+						  datawork);
+	int datastat = mxcmci_transfer_data(host);
+	mxcmci_finish_data(host, datastat);
+
+	if (host->req->stop) {
+		if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+			mxcmci_finish_request(host, host->req);
+			return;
+		}
+	} else {
+		mxcmci_finish_request(host, host->req);
+	}
+}
+
+#ifdef HAS_DMA
+static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+	int data_error;
+
+	if (!data)
+		return;
+
+	data_error = mxcmci_finish_data(host, stat);
+
+	mxcmci_read_response(host, stat);
+	host->cmd = NULL;
+
+	if (host->req->stop) {
+		if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+			mxcmci_finish_request(host, host->req);
+			return;
+		}
+	} else {
+		mxcmci_finish_request(host, host->req);
+	}
+}
+#endif /* HAS_DMA */
+
+static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
+{
+	mxcmci_read_response(host, stat);
+	host->cmd = NULL;
+
+	if (!host->data && host->req) {
+		mxcmci_finish_request(host, host->req);
+		return;
+	}
+
+	/* For the DMA case the DMA engine handles the data transfer
+	 * automatically. For non DMA we have to to it ourselves.
+	 * Don't do it in interrupt context though.
+	 */
+	if (!mxcmci_use_dma(host) && host->data)
+		schedule_work(&host->datawork);
+
+}
+
+static irqreturn_t mxcmci_irq(int irq, void *devid)
+{
+	struct mxcmci_host *host = devid;
+	u32 stat;
+
+	stat = readl(host->base + MMC_REG_STATUS);
+	writel(stat, host->base + MMC_REG_STATUS);
+
+	dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
+
+	if (stat & STATUS_END_CMD_RESP)
+		mxcmci_cmd_done(host, stat);
+#ifdef HAS_DMA
+	if (mxcmci_use_dma(host) &&
+		  (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
+		mxcmci_data_done(host, stat);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+	unsigned int cmdat = host->cmdat;
+
+	WARN_ON(host->req != NULL);
+
+	host->req = req;
+	host->cmdat &= ~CMD_DAT_CONT_INIT;
+#ifdef HAS_DMA
+	host->do_dma = 1;
+#endif
+	if (req->data) {
+		mxcmci_setup_data(host, req->data);
+
+		cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+
+		if (req->data->flags & MMC_DATA_WRITE)
+			cmdat |= CMD_DAT_CONT_WRITE;
+	}
+
+	if (mxcmci_start_cmd(host, req->cmd, cmdat))
+		mxcmci_finish_request(host, req);
+}
+
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
+{
+	unsigned int divider;
+	int prescaler = 0;
+	unsigned int clk_in = clk_get_rate(host->clk);
+
+	while (prescaler <= 0x800) {
+		for (divider = 1; divider <= 0xF; divider++) {
+			int x;
+
+			x = (clk_in / (divider + 1));
+
+			if (prescaler)
+				x /= (prescaler * 2);
+
+			if (x <= clk_ios)
+				break;
+		}
+		if (divider < 0x10)
+			break;
+
+		if (prescaler == 0)
+			prescaler = 1;
+		else
+			prescaler <<= 1;
+	}
+
+	writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
+
+	dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
+			prescaler, divider, clk_in, clk_ios);
+}
+
+static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+#ifdef HAS_DMA
+	unsigned int blen;
+	/*
+	 * use burstlen of 64 in 4 bit mode (--> reg value  0)
+	 * use burstlen of 16 in 1 bit mode (--> reg value 16)
+	 */
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		blen = 0;
+	else
+		blen = 16;
+
+	imx_dma_config_burstlen(host->dma, blen);
+#endif
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+	else
+		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
+
+	if (host->power_mode != ios->power_mode) {
+		if (host->pdata && host->pdata->setpower)
+			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		host->power_mode = ios->power_mode;
+		if (ios->power_mode == MMC_POWER_ON)
+			host->cmdat |= CMD_DAT_CONT_INIT;
+	}
+
+	if (ios->clock) {
+		mxcmci_set_clk_rate(host, ios->clock);
+		writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+	} else {
+		writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
+	}
+
+	host->clock = ios->clock;
+}
+
+static irqreturn_t mxcmci_detect_irq(int irq, void *data)
+{
+	struct mmc_host *mmc = data;
+
+	dev_dbg(mmc_dev(mmc), "%s\n", __func__);
+
+	mmc_detect_change(mmc, msecs_to_jiffies(250));
+	return IRQ_HANDLED;
+}
+
+static int mxcmci_get_ro(struct mmc_host *mmc)
+{
+	struct mxcmci_host *host = mmc_priv(mmc);
+
+	if (host->pdata && host->pdata->get_ro)
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
+}
+
+
+static const struct mmc_host_ops mxcmci_ops = {
+	.request	= mxcmci_request,
+	.set_ios	= mxcmci_set_ios,
+	.get_ro		= mxcmci_get_ro,
+};
+
+static int mxcmci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct mxcmci_host *host = NULL;
+	struct resource *r;
+	int ret = 0, irq;
+
+	printk(KERN_INFO "i.MX SDHC driver\n");
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
+		return -EINVAL;
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (!r)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out_release_mem;
+	}
+
+	mmc->ops = &mxcmci_ops;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	/* MMC core transfer sizes tunable parameters */
+	mmc->max_hw_segs = 64;
+	mmc->max_phys_segs = 64;
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 65535;
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_seg_size = mmc->max_seg_size;
+
+	host = mmc_priv(mmc);
+	host->base = ioremap(r->start, resource_size(r));
+	if (!host->base) {
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	host->mmc = mmc;
+	host->pdata = pdev->dev.platform_data;
+
+	if (host->pdata && host->pdata->ocr_avail)
+		mmc->ocr_avail = host->pdata->ocr_avail;
+	else
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	host->res = r;
+	host->irq = irq;
+
+	host->clk = clk_get(&pdev->dev, "sdhc_clk");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		goto out_iounmap;
+	}
+	clk_enable(host->clk);
+
+	mxcmci_softreset(host);
+
+	host->rev_no = readw(host->base + MMC_REG_REV_NO);
+	if (host->rev_no != 0x400) {
+		ret = -ENODEV;
+		dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
+			host->rev_no);
+		goto out_clk_put;
+	}
+
+	mmc->f_min = clk_get_rate(host->clk) >> 7;
+	mmc->f_max = clk_get_rate(host->clk) >> 1;
+
+	/* recommended in data sheet */
+	writew(0x2db4, host->base + MMC_REG_READ_TO);
+
+	writel(0, host->base + MMC_REG_INT_CNTR);
+
+#ifdef HAS_DMA
+	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
+	if (host->dma < 0) {
+		dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
+		ret = -EBUSY;
+		goto out_clk_put;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!r) {
+		ret = -EINVAL;
+		goto out_free_dma;
+	}
+
+	ret = imx_dma_config_channel(host->dma,
+				     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+				     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+				     r->start, 0);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
+		goto out_free_dma;
+	}
+#endif
+	INIT_WORK(&host->datawork, mxcmci_datawork);
+
+	ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+	if (ret)
+		goto out_free_dma;
+
+	platform_set_drvdata(pdev, mmc);
+
+	if (host->pdata && host->pdata->init) {
+		ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
+				host->mmc);
+		if (ret)
+			goto out_free_irq;
+	}
+
+	mmc_add_host(mmc);
+
+	return 0;
+
+out_free_irq:
+	free_irq(host->irq, host);
+out_free_dma:
+#ifdef HAS_DMA
+	imx_dma_free(host->dma);
+#endif
+out_clk_put:
+	clk_disable(host->clk);
+	clk_put(host->clk);
+out_iounmap:
+	iounmap(host->base);
+out_free:
+	mmc_free_host(mmc);
+out_release_mem:
+	release_mem_region(host->res->start, resource_size(host->res));
+	return ret;
+}
+
+static int mxcmci_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct mxcmci_host *host = mmc_priv(mmc);
+
+	platform_set_drvdata(pdev, NULL);
+
+	mmc_remove_host(mmc);
+
+	if (host->pdata && host->pdata->exit)
+		host->pdata->exit(&pdev->dev, mmc);
+
+	free_irq(host->irq, host);
+	iounmap(host->base);
+#ifdef HAS_DMA
+	imx_dma_free(host->dma);
+#endif
+	clk_disable(host->clk);
+	clk_put(host->clk);
+
+	release_mem_region(host->res->start, resource_size(host->res));
+	release_resource(host->res);
+
+	mmc_free_host(mmc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	int ret = 0;
+
+	if (mmc)
+		ret = mmc_suspend_host(mmc, state);
+
+	return ret;
+}
+
+static int mxcmci_resume(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mxcmci_host *host;
+	int ret = 0;
+
+	if (mmc) {
+		host = mmc_priv(mmc);
+		ret = mmc_resume_host(mmc);
+	}
+
+	return ret;
+}
+#else
+#define mxcmci_suspend  NULL
+#define mxcmci_resume   NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver mxcmci_driver = {
+	.probe		= mxcmci_probe,
+	.remove		= mxcmci_remove,
+	.suspend	= mxcmci_suspend,
+	.resume		= mxcmci_resume,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	}
+};
+
+static int __init mxcmci_init(void)
+{
+	return platform_driver_register(&mxcmci_driver);
+}
+
+static void __exit mxcmci_exit(void)
+{
+	platform_driver_unregister(&mxcmci_driver);
+}
+
+module_init(mxcmci_init);
+module_exit(mxcmci_exit);
+
+MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-mmc");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 3c5483b..9702ad3 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	else
 		DALGN &= ~(1 << host->dma);
 	DDADR(host->dma) = host->sg_dma;
-	DCSR(host->dma) = DCSR_RUN;
+
+	/*
+	 * workaround for erratum #91:
+	 * only start DMA now if we are doing a read,
+	 * otherwise we wait until CMD/RESP has finished
+	 * before starting DMA.
+	 */
+	if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+		DCSR(host->dma) = DCSR_RUN;
 }
 
 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
@@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
 	if (stat & STAT_TIME_OUT_RESPONSE) {
 		cmd->error = -ETIMEDOUT;
 	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
-#ifdef CONFIG_PXA27x
 		/*
 		 * workaround for erratum #42:
 		 * Intel PXA27x Family Processor Specification Update Rev 001
 		 * A bogus CRC error can appear if the msb of a 136 bit
 		 * response is a one.
 		 */
-		if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
+		if (cpu_is_pxa27x() &&
+		    (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
 			pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
-		} else
-#endif
-		cmd->error = -EILSEQ;
+		else
+			cmd->error = -EILSEQ;
 	}
 
 	pxamci_disable_irq(host, END_CMD_RES);
 	if (host->data && !cmd->error) {
 		pxamci_enable_irq(host, DATA_TRAN_DONE);
+		/*
+		 * workaround for erratum #91, if doing write
+		 * enable DMA late
+		 */
+		if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+			DCSR(host->dma) = DCSR_RUN;
 	} else {
 		pxamci_finish_request(host, host->mrq);
 	}
diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
index be9e7b3..f627905 100644
--- a/drivers/mmc/host/ricoh_mmc.c
+++ b/drivers/mmc/host/ricoh_mmc.c
@@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
-static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state)
 {
 	struct pci_dev *fw_dev = NULL;
 
@@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
-static int ricoh_mmc_resume(struct pci_dev *pdev)
+static int ricoh_mmc_resume_early(struct pci_dev *pdev)
 {
 	struct pci_dev *fw_dev = NULL;
 
@@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = {
 	.id_table =	pci_ids,
 	.probe = 	ricoh_mmc_probe,
 	.remove =	__devexit_p(ricoh_mmc_remove),
-	.suspend =	ricoh_mmc_suspend,
-	.resume =	ricoh_mmc_resume,
+	.suspend_late =	ricoh_mmc_suspend_late,
+	.resume_early =	ricoh_mmc_resume_early,
 };
 
 /*****************************************************************************\
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 26474c9..c986978 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.20-k3-NAPI"
+#define DRV_VERSION "7.3.21-k3-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (unlikely(!icr))
+	if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index f3706e4..f49a426 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev,
 	if (NULL == new_bus)
 		return -ENOMEM;
 
+	device_init_wakeup(&ofdev->dev, 1);
+
 	new_bus->name = "Gianfar MII Bus",
 	new_bus->read = &gfar_mdio_read,
 	new_bus->write = &gfar_mdio_write,
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f5e2e72..13ca73f 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
 
 	/* SGMII link check is done through the PCS register. */
 	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    (igb_sgmii_active_82575(hw)))
+	    (igb_sgmii_active_82575(hw))) {
 		ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
 		                                             &duplex);
-	else
+		/*
+		 * Use this flag to determine if link needs to be checked or
+		 * not.  If  we have link clear the flag so that we do not
+		 * continue to check for link.
+		 */
+		hw->mac.get_link_status = !hw->mac.serdes_has_link;
+	} else {
 		ret_val = igb_check_for_copper_link(hw);
+	}
 
 	return ret_val;
 }
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 5a27825..aebef8e 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -300,11 +300,10 @@ struct igb_adapter {
 
 #define IGB_FLAG_HAS_MSI           (1 << 0)
 #define IGB_FLAG_MSI_ENABLE        (1 << 1)
-#define IGB_FLAG_HAS_DCA           (1 << 2)
-#define IGB_FLAG_DCA_ENABLED       (1 << 3)
-#define IGB_FLAG_IN_NETPOLL        (1 << 5)
-#define IGB_FLAG_QUAD_PORT_A       (1 << 6)
-#define IGB_FLAG_NEED_CTX_IDX      (1 << 7)
+#define IGB_FLAG_DCA_ENABLED       (1 << 2)
+#define IGB_FLAG_IN_NETPOLL        (1 << 3)
+#define IGB_FLAG_QUAD_PORT_A       (1 << 4)
+#define IGB_FLAG_NEED_CTX_IDX      (1 << 5)
 
 enum e1000_state_t {
 	__IGB_TESTING,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b82b0fb..a50db53 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -206,10 +206,11 @@ static int __init igb_init_module(void)
 
 	global_quad_port_a = 0;
 
-	ret = pci_register_driver(&igb_driver);
 #ifdef CONFIG_IGB_DCA
 	dca_register_notify(&dca_notifier);
 #endif
+
+	ret = pci_register_driver(&igb_driver);
 	return ret;
 }
 
@@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	/* set flags */
 	switch (hw->mac.type) {
-	case e1000_82576:
 	case e1000_82575:
-		adapter->flags |= IGB_FLAG_HAS_DCA;
 		adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
 		break;
+	case e1000_82576:
 	default:
 		break;
 	}
@@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		goto err_register;
 
 #ifdef CONFIG_IGB_DCA
-	if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
-	    (dca_add_requester(&pdev->dev) == 0)) {
+	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		dev_info(&pdev->dev, "DCA enabled\n");
 		/* Always use CB2 mode, difference is masked
@@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	rctl |= E1000_RCTL_SECRC;
 
 	/*
-	 * disable store bad packets, long packet enable, and clear size bits.
+	 * disable store bad packets and clear size bits.
 	 */
-	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256);
+	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
 
-	if (adapter->netdev->mtu > ETH_DATA_LEN)
+	/* enable LPE when to prevent packets larger than max_frame_size */
 		rctl |= E1000_RCTL_LPE;
 
 	/* Setup buffer sizes */
@@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	 */
 	/* allocations using alloc_page take too long for regular MTU
 	 * so only enable packet split for jumbo frames */
-	if (rctl & E1000_RCTL_LPE) {
+	if (adapter->netdev->mtu > ETH_DATA_LEN) {
 		adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
 		srrctl |= adapter->rx_ps_hdr_size <<
 			 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
@@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned long event = *(unsigned long *)data;
 
-	if (!(adapter->flags & IGB_FLAG_HAS_DCA))
-		goto out;
-
 	switch (event) {
 	case DCA_PROVIDER_ADD:
 		/* if already enabled, don't do it again */
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 			break;
-		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		/* Always use CB2 mode, difference is masked
 		 * in the CB driver. */
 		wr32(E1000_DCA_CTRL, 2);
 		if (dca_add_requester(dev) == 0) {
+			adapter->flags |= IGB_FLAG_DCA_ENABLED;
 			dev_info(&adapter->pdev->dev, "DCA enabled\n");
 			igb_setup_dca(adapter);
 			break;
@@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data)
 		}
 		break;
 	}
-out:
+
 	return 0;
 }
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index a75a310..9c78c96 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -210,7 +210,7 @@
 #define MAX_CMD_DESCRIPTORS_HOST	1024
 #define MAX_RCV_DESCRIPTORS_1G		2048
 #define MAX_RCV_DESCRIPTORS_10G		4096
-#define MAX_JUMBO_RCV_DESCRIPTORS	512
+#define MAX_JUMBO_RCV_DESCRIPTORS	1024
 #define MAX_LRO_RCV_DESCRIPTORS		8
 #define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
 #define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index ca7c8d8..ffd37be 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 	}
 	for (i = 0; i < n; i++) {
 		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
-		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0)
+		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
+			kfree(buf);
 			return -EIO;
+		}
 
 		buf[i].addr = addr;
 		buf[i].data = val;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index ec23142..335da483 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl,
 		complete(&wl->assoc_done);
 		netif_carrier_on(port_to_netdev(wl_port(wl)));
 	} else
-		pr_debug("%s: event %#lx under wpa\n",
+		pr_debug("%s: event %#llx under wpa\n",
 				 __func__, event);
 }
 
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 72fd9e9..b2dcdb5 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
-	struct pci_dev *pdev = lp->pdev;
 	int limit = 2048;
 	u16 *adrp;
 	u16 cmd;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7673fd9..ab0e09b 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx)
 	rc = efx->phy_op->init(efx);
 	if (rc)
 		return rc;
-	efx->phy_op->reconfigure(efx);
-
 	mutex_lock(&efx->mac_lock);
+	efx->phy_op->reconfigure(efx);
 	rc = falcon_switch_mac(efx);
 	mutex_unlock(&efx->mac_lock);
 	if (rc)
@@ -686,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx)
 	efx->mac_op->reconfigure(efx);
 
 	efx->port_initialized = true;
-	efx->stats_enabled = true;
+	efx_stats_enable(efx);
 	return 0;
 
 fail:
@@ -735,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx)
 	if (!efx->port_initialized)
 		return;
 
+	efx_stats_disable(efx);
 	efx->phy_op->fini(efx);
 	efx->port_initialized = false;
 
@@ -1361,6 +1361,20 @@ static int efx_net_stop(struct net_device *net_dev)
 	return 0;
 }
 
+void efx_stats_disable(struct efx_nic *efx)
+{
+	spin_lock(&efx->stats_lock);
+	++efx->stats_disable_count;
+	spin_unlock(&efx->stats_lock);
+}
+
+void efx_stats_enable(struct efx_nic *efx)
+{
+	spin_lock(&efx->stats_lock);
+	--efx->stats_disable_count;
+	spin_unlock(&efx->stats_lock);
+}
+
 /* Context: process, dev_base_lock or RTNL held, non-blocking. */
 static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 {
@@ -1369,12 +1383,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 	struct net_device_stats *stats = &net_dev->stats;
 
 	/* Update stats if possible, but do not wait if another thread
-	 * is updating them (or resetting the NIC); slightly stale
-	 * stats are acceptable.
+	 * is updating them or if MAC stats fetches are temporarily
+	 * disabled; slightly stale stats are acceptable.
 	 */
 	if (!spin_trylock(&efx->stats_lock))
 		return stats;
-	if (efx->stats_enabled) {
+	if (!efx->stats_disable_count) {
 		efx->mac_op->update_stats(efx);
 		falcon_update_nic_stats(efx);
 	}
@@ -1622,16 +1636,12 @@ static void efx_unregister_netdev(struct efx_nic *efx)
 
 /* Tears down the entire software state and most of the hardware state
  * before reset.  */
-void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+		    struct ethtool_cmd *ecmd)
 {
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	/* The net_dev->get_stats handler is quite slow, and will fail
-	 * if a fetch is pending over reset. Serialise against it. */
-	spin_lock(&efx->stats_lock);
-	efx->stats_enabled = false;
-	spin_unlock(&efx->stats_lock);
-
+	efx_stats_disable(efx);
 	efx_stop_all(efx);
 	mutex_lock(&efx->mac_lock);
 	mutex_lock(&efx->spi_lock);
@@ -1639,6 +1649,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	efx->phy_op->get_settings(efx, ecmd);
 
 	efx_fini_channels(efx);
+	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
+		efx->phy_op->fini(efx);
 }
 
 /* This function will always ensure that the locks acquired in
@@ -1646,7 +1658,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
  * that we were unable to reinitialise the hardware, and the
  * driver should be disabled. If ok is false, then the rx and tx
  * engines are not restarted, pending a RESET_DISABLE. */
-int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
+int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+		 struct ethtool_cmd *ecmd, bool ok)
 {
 	int rc;
 
@@ -1658,6 +1671,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
 		ok = false;
 	}
 
+	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) {
+		if (ok) {
+			rc = efx->phy_op->init(efx);
+			if (rc)
+				ok = false;
+		} else
+			efx->port_initialized = false;
+	}
+
 	if (ok) {
 		efx_init_channels(efx);
 
@@ -1670,7 +1692,7 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok)
 
 	if (ok) {
 		efx_start_all(efx);
-		efx->stats_enabled = true;
+		efx_stats_enable(efx);
 	}
 	return rc;
 }
@@ -1702,7 +1724,7 @@ static int efx_reset(struct efx_nic *efx)
 
 	EFX_INFO(efx, "resetting (%d)\n", method);
 
-	efx_reset_down(efx, &ecmd);
+	efx_reset_down(efx, method, &ecmd);
 
 	rc = falcon_reset_hw(efx, method);
 	if (rc) {
@@ -1721,10 +1743,10 @@ static int efx_reset(struct efx_nic *efx)
 
 	/* Leave device stopped if necessary */
 	if (method == RESET_TYPE_DISABLE) {
-		efx_reset_up(efx, &ecmd, false);
+		efx_reset_up(efx, method, &ecmd, false);
 		rc = -EIO;
 	} else {
-		rc = efx_reset_up(efx, &ecmd, true);
+		rc = efx_reset_up(efx, method, &ecmd, true);
 	}
 
 out_disable:
@@ -1876,6 +1898,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	efx->rx_checksum_enabled = true;
 	spin_lock_init(&efx->netif_stop_lock);
 	spin_lock_init(&efx->stats_lock);
+	efx->stats_disable_count = 1;
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = &efx_dummy_mac_operations;
 	efx->phy_op = &efx_dummy_phy_operations;
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index 0dd7a53..55d0f13 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -36,13 +36,16 @@ extern void efx_process_channel_now(struct efx_channel *channel);
 extern void efx_flush_queues(struct efx_nic *efx);
 
 /* Ports */
+extern void efx_stats_disable(struct efx_nic *efx);
+extern void efx_stats_enable(struct efx_nic *efx);
 extern void efx_reconfigure_port(struct efx_nic *efx);
 extern void __efx_reconfigure_port(struct efx_nic *efx);
 
 /* Reset handling */
-extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd);
-extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd,
-			bool ok);
+extern void efx_reset_down(struct efx_nic *efx, enum reset_type method,
+			   struct ethtool_cmd *ecmd);
+extern int efx_reset_up(struct efx_nic *efx, enum reset_type method,
+			struct ethtool_cmd *ecmd, bool ok);
 
 /* Global */
 extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 53d259e..7b5924c0 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev,
 	struct efx_nic *efx = netdev_priv(net_dev);
 	int rc;
 
-	if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg)
-		return -EINVAL;
-
 	/* Falcon GMAC does not support 1000Mbps HD */
 	if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
 		EFX_LOG(efx, "rejecting unsupported 1000Mbps HD"
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 5b9f2d9..d5378e6 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue,
 			    rx_ev_pause_frm ? " [PAUSE]" : "");
 	}
 #endif
-
-	if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) &&
-		     efx->phy_type == PHY_TYPE_SFX7101))
-		tenxpress_crc_err(efx);
 }
 
 /* Handle receive events that are not in-order. */
@@ -1887,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx)
 
 	/* MAC stats will fail whilst the TX fifo is draining. Serialise
 	 * the drain sequence with the statistics fetch */
-	spin_lock(&efx->stats_lock);
+	efx_stats_disable(efx);
 
 	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
 	EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1);
@@ -1917,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx)
 		udelay(10);
 	}
 
-	spin_unlock(&efx->stats_lock);
+	efx_stats_enable(efx);
 
 	/* If we've reset the EM block and the link is up, then
 	 * we'll have to kick the XAUI link so the PHY can recover */
@@ -2277,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx)
 	struct efx_mac_operations *old_mac_op = efx->mac_op;
 	efx_oword_t nic_stat;
 	unsigned strap_val;
+	int rc = 0;
+
+	/* Don't try to fetch MAC stats while we're switching MACs */
+	efx_stats_disable(efx);
 
 	/* Internal loopbacks override the phy speed setting */
 	if (efx->loopback_mode == LOOPBACK_GMAC) {
@@ -2287,16 +2287,12 @@ int falcon_switch_mac(struct efx_nic *efx)
 		efx->link_fd = true;
 	}
 
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
 	efx->mac_op = (EFX_IS10G(efx) ?
 		       &falcon_xmac_operations : &falcon_gmac_operations);
-	if (old_mac_op == efx->mac_op)
-		return 0;
-
-	WARN_ON(!mutex_is_locked(&efx->mac_lock));
-
-	/* Not all macs support a mac-level link state */
-	efx->mac_up = true;
 
+	/* Always push the NIC_STAT_REG setting even if the mac hasn't
+	 * changed, because this function is run post online reset */
 	falcon_read(efx, &nic_stat, NIC_STAT_REG);
 	strap_val = EFX_IS10G(efx) ? 5 : 3;
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
@@ -2309,9 +2305,17 @@ int falcon_switch_mac(struct efx_nic *efx)
 		BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val);
 	}
 
+	if (old_mac_op == efx->mac_op)
+		goto out;
 
 	EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G');
-	return falcon_reset_macs(efx);
+	/* Not all macs support a mac-level link state */
+	efx->mac_up = true;
+
+	rc = falcon_reset_macs(efx);
+out:
+	efx_stats_enable(efx);
+	return rc;
 }
 
 /* This call is responsible for hooking in the MAC and PHY operations */
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index f6a16428..f9e2f95 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -15,6 +15,7 @@
 #include "net_driver.h"
 #include "mdio_10g.h"
 #include "boards.h"
+#include "workarounds.h"
 
 int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
 			    int spins, int spintime)
@@ -179,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 		return false;
 	else if (efx_phy_mode_disabled(efx->phy_mode))
 		return false;
-	else if (efx->loopback_mode == LOOPBACK_PHYXS) {
+	else if (efx->loopback_mode == LOOPBACK_PHYXS)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
 			      MDIO_MMDREG_DEVS_PCS |
 			      MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
-		if (!mmd_mask) {
-			reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
-						 MDIO_PHYXS_STATUS2);
-			return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
-		}
-	} else if (efx->loopback_mode == LOOPBACK_PCS)
+	else if (efx->loopback_mode == LOOPBACK_PCS)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
 			      MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
@@ -197,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 		mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
 			      MDIO_MMDREG_DEVS_AN);
 
+	if (!mmd_mask) {
+		/* Use presence of XGMII faults in leui of link state */
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
+					 MDIO_PHYXS_STATUS2);
+		return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
+	}
+
 	while (mmd_mask) {
 		if (mmd_mask & 1) {
 			/* Double reads because link state is latched, and a
@@ -263,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
 	}
 }
 
-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
+static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
 {
 	int phy_id = efx->mii.phy_id;
 	u32 result = 0;
@@ -278,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
 		result |= ADVERTISED_100baseT_Half;
 	if (reg & ADVERTISE_100FULL)
 		result |= ADVERTISED_100baseT_Full;
-	if (reg & LPA_RESV)
-		result |= xnp;
-
 	return result;
 }
 
@@ -310,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx,
  */
 void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 				    struct ethtool_cmd *ecmd,
-				    u32 xnp, u32 xnp_lpa)
+				    u32 npage_adv, u32 npage_lpa)
 {
 	int phy_id = efx->mii.phy_id;
 	int reg;
@@ -361,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 			ecmd->autoneg = AUTONEG_ENABLE;
 			ecmd->advertising |=
 				ADVERTISED_Autoneg |
-				mdio_clause45_get_an(efx,
-						     MDIO_AN_ADVERTISE, xnp);
+				mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
+				npage_adv;
 		} else
 			ecmd->autoneg = AUTONEG_DISABLE;
 	} else
@@ -371,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
 	if (ecmd->autoneg) {
 		/* If AN is complete, report best common mode,
 		 * otherwise report best advertised mode. */
-		u32 common = ecmd->advertising;
+		u32 modes = 0;
 		if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
 				       MDIO_MMDREG_STAT1) &
-		    (1 << MDIO_AN_STATUS_AN_DONE_LBN)) {
-			common &= mdio_clause45_get_an(efx, MDIO_AN_LPA,
-						       xnp_lpa);
-		}
-		if (common & ADVERTISED_10000baseT_Full) {
+		    (1 << MDIO_AN_STATUS_AN_DONE_LBN))
+			modes = (ecmd->advertising &
+				 (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
+				  npage_lpa));
+		if (modes == 0)
+			modes = ecmd->advertising;
+
+		if (modes & ADVERTISED_10000baseT_Full) {
 			ecmd->speed = SPEED_10000;
 			ecmd->duplex = DUPLEX_FULL;
-		} else if (common & (ADVERTISED_1000baseT_Full |
-				     ADVERTISED_1000baseT_Half)) {
+		} else if (modes & (ADVERTISED_1000baseT_Full |
+				    ADVERTISED_1000baseT_Half)) {
 			ecmd->speed = SPEED_1000;
-			ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full);
-		} else if (common & (ADVERTISED_100baseT_Full |
-				     ADVERTISED_100baseT_Half)) {
+			ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
+		} else if (modes & (ADVERTISED_100baseT_Full |
+				    ADVERTISED_100baseT_Half)) {
 			ecmd->speed = SPEED_100;
-			ecmd->duplex = !!(common & ADVERTISED_100baseT_Full);
+			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
 		} else {
 			ecmd->speed = SPEED_10;
-			ecmd->duplex = !!(common & ADVERTISED_10baseT_Full);
+			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		/* Report forced settings */
@@ -415,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 	int phy_id = efx->mii.phy_id;
 	struct ethtool_cmd prev;
 	u32 required;
-	int ctrl1_bits, reg;
+	int reg;
 
 	efx->phy_op->get_settings(efx, &prev);
 
@@ -430,99 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 	if (prev.port != PORT_TP || ecmd->port != PORT_TP)
 		return -EINVAL;
 
-	/* Check that PHY supports these settings and work out the
-	 * basic control bits */
-	if (ecmd->duplex) {
+	/* Check that PHY supports these settings */
+	if (ecmd->autoneg) {
+		required = SUPPORTED_Autoneg;
+	} else if (ecmd->duplex) {
 		switch (ecmd->speed) {
-		case SPEED_10:
-			ctrl1_bits = BMCR_FULLDPLX;
-			required = SUPPORTED_10baseT_Full;
-			break;
-		case SPEED_100:
-			ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX;
-			required = SUPPORTED_100baseT_Full;
-			break;
-		case SPEED_1000:
-			ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX;
-			required = SUPPORTED_1000baseT_Full;
-			break;
-		case SPEED_10000:
-			ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 |
-				      BMCR_FULLDPLX);
-			required = SUPPORTED_10000baseT_Full;
-			break;
-		default:
-			return -EINVAL;
+		case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
+		case SPEED_100: required = SUPPORTED_100baseT_Full; break;
+		default:        return -EINVAL;
 		}
 	} else {
 		switch (ecmd->speed) {
-		case SPEED_10:
-			ctrl1_bits = 0;
-			required = SUPPORTED_10baseT_Half;
-			break;
-		case SPEED_100:
-			ctrl1_bits = BMCR_SPEED100;
-			required = SUPPORTED_100baseT_Half;
-			break;
-		case SPEED_1000:
-			ctrl1_bits = BMCR_SPEED1000;
-			required = SUPPORTED_1000baseT_Half;
-			break;
-		default:
-			return -EINVAL;
+		case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
+		case SPEED_100: required = SUPPORTED_100baseT_Half; break;
+		default:        return -EINVAL;
 		}
 	}
-	if (ecmd->autoneg)
-		required |= SUPPORTED_Autoneg;
 	required |= ecmd->advertising;
 	if (required & ~prev.supported)
 		return -EINVAL;
 
-	/* Set the basic control bits */
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_MMDREG_CTRL1);
-	reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c);
-	reg |= ctrl1_bits;
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1,
-			    reg);
-
-	/* Set the AN registers */
-	if (ecmd->autoneg != prev.autoneg ||
-	    ecmd->advertising != prev.advertising) {
-		bool xnp = false;
-
-		if (efx->phy_op->set_xnp_advertise)
-			xnp = efx->phy_op->set_xnp_advertise(efx,
-							     ecmd->advertising);
-
-		if (ecmd->autoneg) {
-			reg = 0;
-			if (ecmd->advertising & ADVERTISED_10baseT_Half)
-				reg |= ADVERTISE_10HALF;
-			if (ecmd->advertising & ADVERTISED_10baseT_Full)
-				reg |= ADVERTISE_10FULL;
-			if (ecmd->advertising & ADVERTISED_100baseT_Half)
-				reg |= ADVERTISE_100HALF;
-			if (ecmd->advertising & ADVERTISED_100baseT_Full)
-				reg |= ADVERTISE_100FULL;
-			if (xnp)
-				reg |= ADVERTISE_RESV;
-			mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-					    MDIO_AN_ADVERTISE, reg);
-		}
+	if (ecmd->autoneg) {
+		bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+			    || EFX_WORKAROUND_13204(efx));
+
+		/* Set up the base page */
+		reg = ADVERTISE_CSMA;
+		if (ecmd->advertising & ADVERTISED_10baseT_Half)
+			reg |= ADVERTISE_10HALF;
+		if (ecmd->advertising & ADVERTISED_10baseT_Full)
+			reg |= ADVERTISE_10FULL;
+		if (ecmd->advertising & ADVERTISED_100baseT_Half)
+			reg |= ADVERTISE_100HALF;
+		if (ecmd->advertising & ADVERTISED_100baseT_Full)
+			reg |= ADVERTISE_100FULL;
+		if (xnp)
+			reg |= ADVERTISE_RESV;
+		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+					      ADVERTISED_1000baseT_Full))
+			reg |= ADVERTISE_NPAGE;
+		reg |= efx_fc_advertise(efx->wanted_fc);
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
+				    MDIO_AN_ADVERTISE, reg);
+
+		/* Set up the (extended) next page if necessary */
+		if (efx->phy_op->set_npage_adv)
+			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
 
+		/* Enable and restart AN */
 		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
 					 MDIO_MMDREG_CTRL1);
-		if (ecmd->autoneg)
-			reg |= BMCR_ANENABLE | BMCR_ANRESTART;
-		else
-			reg &= ~BMCR_ANENABLE;
+		reg |= BMCR_ANENABLE;
+		if (!(EFX_WORKAROUND_15195(efx) &&
+		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+			reg |= BMCR_ANRESTART;
 		if (xnp)
 			reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
 		else
 			reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
 				    MDIO_MMDREG_CTRL1, reg);
+	} else {
+		/* Disable AN */
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+				       MDIO_MMDREG_CTRL1,
+				       __ffs(BMCR_ANENABLE), false);
+
+		/* Set the basic control bits */
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+					 MDIO_MMDREG_CTRL1);
+		reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
+			 0x003c);
+		if (ecmd->speed == SPEED_100)
+			reg |= BMCR_SPEED100;
+		if (ecmd->duplex)
+			reg |= BMCR_FULLDPLX;
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+				    MDIO_MMDREG_CTRL1, reg);
 	}
 
 	return 0;
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 09bf801..8ba4977 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -155,7 +155,8 @@
 #define MDIO_AN_XNP			22
 #define MDIO_AN_LPA_XNP			25
 
-#define MDIO_AN_10GBT_ADVERTISE		32
+#define MDIO_AN_10GBT_CTRL		32
+#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN	12
 #define MDIO_AN_10GBT_STATUS		(33)
 #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
 #define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 5f255f7..e019ad1 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -566,7 +566,7 @@ struct efx_mac_operations {
  * @poll: Poll for hardware state. Serialised by the mac_lock.
  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
- * @set_xnp_advertise: Set abilities advertised in Extended Next Page
+ * @set_npage_adv: Set abilities advertised in (Extended) Next Page
  *	(only needed where AN bit is set in mmds)
  * @num_tests: Number of PHY-specific tests/results
  * @test_names: Names of the tests/results
@@ -586,7 +586,7 @@ struct efx_phy_operations {
 			      struct ethtool_cmd *ecmd);
 	int (*set_settings) (struct efx_nic *efx,
 			     struct ethtool_cmd *ecmd);
-	bool (*set_xnp_advertise) (struct efx_nic *efx, u32);
+	void (*set_npage_adv) (struct efx_nic *efx, u32);
 	u32 num_tests;
 	const char *const *test_names;
 	int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
@@ -754,8 +754,7 @@ union efx_multicast_hash {
  *	&struct net_device_stats.
  * @stats_buffer: DMA buffer for statistics
  * @stats_lock: Statistics update lock. Serialises statistics fetches
- * @stats_enabled: Temporarily disable statistics fetches.
- *	Serialised by @stats_lock
+ * @stats_disable_count: Nest count for disabling statistics fetches
  * @mac_op: MAC interface
  * @mac_address: Permanent MAC address
  * @phy_type: PHY type
@@ -837,7 +836,7 @@ struct efx_nic {
 	struct efx_mac_stats mac_stats;
 	struct efx_buffer stats_buffer;
 	spinlock_t stats_lock;
-	bool stats_enabled;
+	unsigned int stats_disable_count;
 
 	struct efx_mac_operations *mac_op;
 	unsigned char mac_address[ETH_ALEN];
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index 58c493e..07e855c 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops;
 extern struct efx_phy_operations falcon_sft9001_phy_ops;
 
 extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
-extern void tenxpress_crc_err(struct efx_nic *efx);
 
 /****************************************************************************
  * Exported functions from the driver for XFP optical PHYs
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index dba0d64..0a59808 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 {
 	enum efx_loopback_mode loopback_mode = efx->loopback_mode;
 	int phy_mode = efx->phy_mode;
+	enum reset_type reset_method = RESET_TYPE_INVISIBLE;
 	struct ethtool_cmd ecmd;
 	struct efx_channel *channel;
 	int rc_test = 0, rc_reset = 0, rc;
@@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	mutex_unlock(&efx->mac_lock);
 
 	/* free up all consumers of SRAM (including all the queues) */
-	efx_reset_down(efx, &ecmd);
+	efx_reset_down(efx, reset_method, &ecmd);
 
 	rc = efx_test_chip(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
 	/* reset the chip to recover from the register test */
-	rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL);
+	rc_reset = falcon_reset_hw(efx, reset_method);
 
 	/* Ensure that the phy is powered and out of loopback
 	 * for the bist and loopback tests */
 	efx->phy_mode &= ~PHY_MODE_LOW_POWER;
 	efx->loopback_mode = LOOPBACK_NONE;
 
-	rc = efx_reset_up(efx, &ecmd, rc_reset == 0);
+	rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0);
 	if (rc && !rc_reset)
 		rc_reset = rc;
 
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 16b80ac..cb25ae5 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 
-	/* GPIO pins are also used for I2C, so block that temporarily */
+	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
 	mutex_lock(&efx->i2c_adap.bus_lock);
 
+	/* Pull RST_N (GPIO 2) low then let it up again, setting the
+	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+	 * output enables; the output levels should always be 0 (low)
+	 * and we rely on external pull-ups. */
 	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
 	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false);
 	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
 	msleep(1000);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OUT,
-			    !(efx->phy_mode & PHY_MODE_SPECIAL));
+	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
+	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
+			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
 	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	msleep(1);
 
 	mutex_unlock(&efx->i2c_adap.bus_lock);
 
@@ -232,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev,
 	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
 		err = -EBUSY;
 	} else {
+		/* Reset the PHY, reconfigure the MAC and enable/disable
+		 * MAC stats accordingly. */
 		efx->phy_mode = new_mode;
+		if (new_mode & PHY_MODE_SPECIAL)
+			efx_stats_disable(efx);
 		if (efx->board_info.type == EFX_BOARD_SFE4001)
 			err = sfe4001_poweron(efx);
 		else
 			err = sfn4111t_reset(efx);
 		efx_reconfigure_port(efx);
+		if (!(new_mode & PHY_MODE_SPECIAL))
+			efx_stats_enable(efx);
 	}
 	rtnl_unlock();
 
@@ -326,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx)
 	efx->board_info.monitor = sfe4001_check_hw;
 	efx->board_info.fini = sfe4001_fini;
 
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
+		 * will fail. */
+		efx_stats_disable(efx);
+	}
 	rc = sfe4001_poweron(efx);
 	if (rc)
 		goto fail_ioexp;
@@ -372,17 +386,25 @@ static void sfn4111t_fini(struct efx_nic *efx)
 	i2c_unregister_device(efx->board_info.hwmon_client);
 }
 
-static struct i2c_board_info sfn4111t_hwmon_info = {
+static struct i2c_board_info sfn4111t_a0_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
 	.irq		= -1,
 };
 
+static struct i2c_board_info sfn4111t_r5_hwmon_info = {
+	I2C_BOARD_INFO("max6646", 0x4d),
+	.irq		= -1,
+};
+
 int sfn4111t_init(struct efx_nic *efx)
 {
 	int rc;
 
 	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info);
+		i2c_new_device(&efx->i2c_adap,
+			       (efx->board_info.minor < 5) ?
+			       &sfn4111t_a0_hwmon_info :
+			       &sfn4111t_r5_hwmon_info);
 	if (!efx->board_info.hwmon_client)
 		return -EIO;
 
@@ -394,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx)
 	if (rc)
 		goto fail_hwmon;
 
-	if (efx->phy_mode & PHY_MODE_SPECIAL)
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		efx_stats_disable(efx);
 		sfn4111t_reset(efx);
+	}
 
 	return 0;
 
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 9ecb77d..f0efd24 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -67,6 +67,8 @@
 #define PMA_PMD_EXT_CLK312_WIDTH 1
 #define PMA_PMD_EXT_LPOWER_LBN  12
 #define PMA_PMD_EXT_LPOWER_WIDTH 1
+#define PMA_PMD_EXT_ROBUST_LBN	14
+#define PMA_PMD_EXT_ROBUST_WIDTH 1
 #define PMA_PMD_EXT_SSR_LBN	15
 #define PMA_PMD_EXT_SSR_WIDTH	1
 
@@ -177,35 +179,24 @@
 #define C22EXT_STATUS_LINK_LBN  2
 #define C22EXT_STATUS_LINK_WIDTH 1
 
-#define C22EXT_MSTSLV_REG       49162
-#define C22EXT_MSTSLV_1000_HD_LBN 10
-#define C22EXT_MSTSLV_1000_HD_WIDTH 1
-#define C22EXT_MSTSLV_1000_FD_LBN 11
-#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+#define C22EXT_MSTSLV_CTRL			49161
+#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN	8
+#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN	9
+
+#define C22EXT_MSTSLV_STATUS			49162
+#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN	10
+#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN	11
 
 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)
 
-static int crc_error_reset_threshold = 100;
-module_param(crc_error_reset_threshold, int, 0644);
-MODULE_PARM_DESC(crc_error_reset_threshold,
-		 "Max number of CRC errors before XAUI reset");
-
 struct tenxpress_phy_data {
 	enum efx_loopback_mode loopback_mode;
-	atomic_t bad_crc_count;
 	enum efx_phy_mode phy_mode;
 	int bad_lp_tries;
 };
 
-void tenxpress_crc_err(struct efx_nic *efx)
-{
-	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	if (phy_data != NULL)
-		atomic_inc(&phy_data->bad_crc_count);
-}
-
 static ssize_t show_phy_short_reach(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx)
 					 PMA_PMD_XCONTROL_REG);
 		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
 			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
-			(1 << PMA_PMD_EXT_CLK312_LBN));
+			(1 << PMA_PMD_EXT_CLK312_LBN) |
+			(1 << PMA_PMD_EXT_ROBUST_LBN));
+
 		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
 				    PMA_PMD_XCONTROL_REG, reg);
 		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
@@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
+	mdio_clause45_set_pause(efx);
 
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
@@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 
 	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
-	 * requests to fail. Since we don't often special_reset, just lock. */
-	spin_lock(&efx->stats_lock);
+	 * requests to fail. */
+	efx_stats_disable(efx);
 
 	/* Initiate reset */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
@@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	rc = mdio_clause45_wait_reset_mmds(efx,
 					   TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Try and reconfigure the device */
 	rc = tenxpress_init(efx);
 	if (rc < 0)
-		goto unlock;
+		goto out;
 
 	/* Wait for the XGXS state machine to churn */
 	mdelay(10);
-unlock:
-	spin_unlock(&efx->stats_lock);
+out:
+	efx_stats_enable(efx);
 	return rc;
 }
 
@@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	struct ethtool_cmd ecmd;
-	bool phy_mode_change, loop_reset, loop_toggle, loopback;
+	bool phy_mode_change, loop_reset;
 
 	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
@@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 
 	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
 			   phy_data->phy_mode != PHY_MODE_NORMAL);
-	loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
-	loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
 	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
 		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
 
-	if (loop_reset || loop_toggle || loopback || phy_mode_change) {
+	if (loop_reset || phy_mode_change) {
 		int rc;
 
 		efx->phy_op->get_settings(efx, &ecmd);
@@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 				falcon_reset_xaui(efx);
 		}
 
-		if (efx->phy_type != PHY_TYPE_SFX7101) {
-			/* Only change autoneg once, on coming out or
-			 * going into loopback */
-			if (loop_toggle)
-				ecmd.autoneg = !loopback;
-			if (loopback) {
-				ecmd.duplex = DUPLEX_FULL;
-				if (efx->loopback_mode == LOOPBACK_GPHY)
-					ecmd.speed = SPEED_1000;
-				else
-					ecmd.speed = SPEED_10000;
-			}
-		}
-
 		rc = efx->phy_op->set_settings(efx, &ecmd);
 		WARN_ON(rc);
 	}
@@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 
 	if (phy_data->phy_mode != PHY_MODE_NORMAL)
 		return;
-
-	if (EFX_WORKAROUND_10750(efx) &&
-	    atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
-		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
-		falcon_reset_xaui(efx);
-		atomic_set(&phy_data->bad_crc_count, 0);
-	}
 }
 
 static void tenxpress_phy_fini(struct efx_nic *efx)
@@ -772,107 +743,76 @@ reset:
 	return rc;
 }
 
-static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
+static void
+tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy = efx->mii.phy_id;
-	u32 lpa = 0;
+	int phy_id = efx->mii.phy_id;
+	u32 adv = 0, lpa = 0;
 	int reg;
 
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_REG);
-		if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_CTRL);
+		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
+			adv |= ADVERTISED_1000baseT_Full;
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_STATUS);
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
 			lpa |= ADVERTISED_1000baseT_Half;
-		if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
 			lpa |= ADVERTISED_1000baseT_Full;
 	}
-	reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_CTRL);
+	if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+		adv |= ADVERTISED_10000baseT_Full;
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+				 MDIO_AN_10GBT_STATUS);
 	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
 		lpa |= ADVERTISED_10000baseT_Full;
-	return lpa;
-}
 
-static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
-	mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
-				       tenxpress_get_xnp_lpa(efx));
-	ecmd->supported |= SUPPORTED_10000baseT_Full;
-	ecmd->advertising |= ADVERTISED_10000baseT_Full;
+	mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+
+	if (efx->phy_type != PHY_TYPE_SFX7101)
+		ecmd->supported |= (SUPPORTED_100baseT_Full |
+				    SUPPORTED_1000baseT_Full);
+
+	/* In loopback, the PHY automatically brings up the correct interface,
+	 * but doesn't advertise the correct speed. So override it */
+	if (efx->loopback_mode == LOOPBACK_GPHY)
+		ecmd->speed = SPEED_1000;
+	else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
+		ecmd->speed = SPEED_10000;
 }
 
-static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
-	u32 xnp_adv = 0;
-	int reg;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 PMA_PMD_SPEED_ENABLE_REG);
-	if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
-		xnp_adv |= ADVERTISED_100baseT_Full;
-	if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_1000baseT_Full;
-	if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
-		xnp_adv |= ADVERTISED_10000baseT_Full;
-
-	mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
-				       tenxpress_get_xnp_lpa(efx));
-
-	ecmd->supported |= (SUPPORTED_100baseT_Half |
-			    SUPPORTED_100baseT_Full |
-			    SUPPORTED_1000baseT_Full);
+	if (!ecmd->autoneg)
+		return -EINVAL;
 
-	/* Use the vendor defined C22ext register for duplex settings */
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 GPHY_XCONTROL_REG);
-		ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
-				DUPLEX_FULL : DUPLEX_HALF);
-	}
+	return mdio_clause45_set_settings(efx, ecmd);
 }
 
-static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy_id = efx->mii.phy_id;
-	int rc;
-
-	rc = mdio_clause45_set_settings(efx, ecmd);
-	if (rc)
-		return rc;
-
-	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
-				       ecmd->duplex == DUPLEX_FULL);
-
-	return rc;
+	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
-static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
+static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy = efx->mii.phy_id;
-	int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
-				     PMA_PMD_SPEED_ENABLE_REG);
-	bool enabled;
-
-	reg &= ~((1 << 2) | (1 << 3));
-	if (EFX_WORKAROUND_13204(efx) &&
-	    (advertising & ADVERTISED_100baseT_Full))
-		reg |= 1 << PMA_PMD_100TX_ADV_LBN;
-	if (advertising & ADVERTISED_1000baseT_Full)
-		reg |= 1 << PMA_PMD_1000T_ADV_LBN;
-	if (advertising & ADVERTISED_10000baseT_Full)
-		reg |= 1 << PMA_PMD_10000T_ADV_LBN;
-	mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
-			    PMA_PMD_SPEED_ENABLE_REG, reg);
-
-	enabled = (advertising &
-		   (ADVERTISED_1000baseT_Half |
-		    ADVERTISED_1000baseT_Full |
-		    ADVERTISED_10000baseT_Full));
-	if (EFX_WORKAROUND_13204(efx))
-		enabled |= (advertising & ADVERTISED_100baseT_Full);
-	return enabled;
+	int phy_id = efx->mii.phy_id;
+
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+			       C22EXT_MSTSLV_CTRL,
+			       C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+			       advertising & ADVERTISED_1000baseT_Full);
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+			       MDIO_AN_10GBT_CTRL,
+			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+			       advertising & ADVERTISED_10000baseT_Full);
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
@@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sfx7101_get_settings,
-	.set_settings	  = mdio_clause45_set_settings,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sfx7101_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sfx7101_test_names),
 	.test_names	  = sfx7101_test_names,
 	.run_tests	  = sfx7101_run_tests,
@@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
-	.get_settings	  = sft9001_get_settings,
-	.set_settings	  = sft9001_set_settings,
-	.set_xnp_advertise = sft9001_set_xnp_advertise,
+	.get_settings	  = tenxpress_get_settings,
+	.set_settings	  = tenxpress_set_settings,
+	.set_npage_adv    = sft9001_set_npage_adv,
 	.num_tests	  = ARRAY_SIZE(sft9001_test_names),
 	.test_names	  = sft9001_test_names,
 	.run_tests	  = sft9001_run_tests,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index 82e03e1..78de68f 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -18,8 +18,8 @@
 #define EFX_WORKAROUND_ALWAYS(efx) 1
 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
 #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx)
-#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101)
-#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A)
+#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \
+				     (efx)->phy_type == PHY_TYPE_SFT9001B)
 
 /* XAUI resets if link not detected */
 #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
@@ -29,8 +29,6 @@
 #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G
 /* TX pkt parser problem with <= 16 byte TXes */
 #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS
-/* Low rate CRC errors require XAUI reset */
-#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101
 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor
  * or a PCIe error (bug 11028) */
 #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS
@@ -55,8 +53,8 @@
 #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A
 
 /* Need to send XNP pages for 100BaseT */
-#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A
-/* Need to keep AN enabled */
-#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A
+#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001
+/* Don't restart AN in near-side loopback */
+#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001
 
 #endif /* EFX_WORKAROUNDS_H */
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 607efea..9a00e55 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		break;
 	case SKFP_CLR_STATS:	/* Zero out the driver statistics */
 		if (!capable(CAP_NET_ADMIN)) {
-			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
-		} else {
 			status = -EPERM;
+		} else {
+			memset(&lp->MacStat, 0, sizeof(lp->MacStat));
 		}
 		break;
 	default:
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3668e81e..994703c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev)
 
  	}
 
-	if (netif_msg_ifup(sky2))
-		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
-
 	netif_carrier_off(dev);
 
 	/* must be power of 2 */
@@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev)
 	sky2_write32(hw, B0_IMSK, imask);
 
 	sky2_set_multicast(dev);
+
+	if (netif_msg_ifup(sky2))
+		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 	return 0;
 
 err_out:
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index f513bdf..783c1a7b 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes)
 		do {
 			udelay(1);
 			val = smsc911x_reg_read(pdata, RX_DP_CTRL);
-		} while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_));
+		} while (--timeout && (val & RX_DP_CTRL_RX_FFWD_));
 
 		if (unlikely(timeout == 0))
 			SMSC_WARNING(HW, "Timed out waiting for "
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index c14a4c6..d801900 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	/* test the IRQ connection to the ISR */
 	smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq);
+	pd->software_irq_signal = false;
 
 	spin_lock_irqsave(&pd->int_lock, flags);
 	/* configure interrupt deassertion timer and enable interrupts */
@@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev)
 	smsc9420_pci_flush_write(pd);
 
 	timeout = 1000;
-	pd->software_irq_signal = false;
-	smp_wmb();
 	while (timeout--) {
 		if (pd->software_irq_signal)
 			break;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 1210fb3..db7d5e1 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -9,6 +9,11 @@
 
 	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
 	for more information on this driver.
+
+	DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
+	Hardware Reference Manual" is currently available at :
+	http://developer.intel.com/design/network/manuals/278074.htm
+
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
@@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work)
 	int csr12 = ioread32(ioaddr + CSR12);
 	int next_tick = 60*HZ;
 	int new_csr6 = 0;
+	int csr14 = ioread32(ioaddr + CSR14);
 
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
 	if (tulip_debug > 2)
 		printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
 			   dev->name, csr12, medianame[dev->if_port]);
@@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work)
 			new_csr6 = 0x83860000;
 			dev->if_port = 3;
 			iowrite32(0, ioaddr + CSR13);
-			iowrite32(0x0003FF7F, ioaddr + CSR14);
+			iowrite32(0x0003FFFF, ioaddr + CSR14);
 			iowrite16(8, ioaddr + CSR15);
 			iowrite32(1, ioaddr + CSR13);
 		}
@@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	int csr12 = ioread32(ioaddr + CSR12);
+	int csr14 = ioread32(ioaddr + CSR14);
 
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
 	if (tulip_debug > 1)
 		printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
-			   "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14));
+			   "%8.8x.\n", dev->name, csr12, csr5, csr14);
 
 	/* If NWay finished and we have a negotiated partner capability. */
 	if (tp->nway  &&  !tp->nwayset  &&  (csr12 & 0x7000) == 0x5000) {
@@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 		int negotiated = tp->sym_advertise & (csr12 >> 16);
 		tp->lpar = csr12 >> 16;
 		tp->nwayset = 1;
-		if (negotiated & 0x0100)		dev->if_port = 5;
+		/* If partner cannot negotiate, it is 10Mbps Half Duplex */
+		if (!(csr12 & 0x8000))		dev->if_port = 0;
+		else if (negotiated & 0x0100)	dev->if_port = 5;
 		else if (negotiated & 0x0080)	dev->if_port = 3;
 		else if (negotiated & 0x0040)	dev->if_port = 4;
 		else if (negotiated & 0x0020)	dev->if_port = 0;
@@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 			tp->timer.expires = RUN_AT(3*HZ);
 			add_timer(&tp->timer);
 		} else if (dev->if_port == 5)
-			iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14);
+			iowrite32(csr14 & ~0x080, ioaddr + CSR14);
 	} else if (dev->if_port == 0  ||  dev->if_port == 4) {
 		if ((csr12 & 4) == 0)
 			printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 1144122..e879868 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev)
 static int init_phy(struct net_device *dev)
 {
 	struct ucc_geth_private *priv = netdev_priv(dev);
+	struct device_node *np = priv->node;
+	struct device_node *phy, *mdio;
+	const phandle *ph;
+	char bus_name[MII_BUS_ID_SIZE];
+	const unsigned int *id;
 	struct phy_device *phydev;
 	char phy_id[BUS_ID_SIZE];
 
@@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
-		 priv->ug_info->phy_address);
+	ph = of_get_property(np, "phy-handle", NULL);
+	phy = of_find_node_by_phandle(*ph);
+	mdio = of_get_parent(phy);
+
+	id = of_get_property(phy, "reg", NULL);
+
+	of_node_put(phy);
+	of_node_put(mdio);
+
+	uec_mdio_bus_name(bus_name, mdio);
+	snprintf(phy_id, sizeof(phy_id), "%s:%02x",
+                                bus_name, *id);
 
 	phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
 
@@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
 	ugeth->ug_info = ug_info;
 	ugeth->dev = dev;
+	ugeth->node = np;
 
 	return 0;
 }
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 8f699cb..16cbe42 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1186,6 +1186,8 @@ struct ucc_geth_private {
 	int oldspeed;
 	int oldduplex;
 	int oldlink;
+
+	struct device_node *node;
 };
 
 void uec_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index c001d26..5463591 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
 	if (err)
 		goto reg_map_fail;
 
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+	uec_mdio_bus_name(new_bus->id, np);
 
 	new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
 
@@ -283,3 +283,13 @@ void uec_mdio_exit(void)
 {
 	of_unregister_platform_driver(&uec_mdio_driver);
 }
+
+void uec_mdio_bus_name(char *name, struct device_node *np)
+{
+        const u32 *reg;
+
+        reg = of_get_property(np, "reg", NULL);
+
+        snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
index 1e45b20..840cf80 100644
--- a/drivers/net/ucc_geth_mii.h
+++ b/drivers/net/ucc_geth_mii.h
@@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
 int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
 int __init uec_mdio_init(void);
 void uec_mdio_exit(void);
+void uec_mdio_bus_name(char *name, struct device_node *np);
 #endif				/* __UEC_MII_H */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 63ef2a8..c688083 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -287,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
-		sg_init_one(sg, hdr, sizeof(*hdr));
+		sg_set_buf(sg, hdr, sizeof(*hdr));
 
 		if (vi->big_packets) {
 			for (i = 0; i < MAX_SKB_FRAGS; i++) {
@@ -488,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 
 	/* Encode metadata header at front. */
 	if (vi->mergeable_rx_bufs)
-		sg_init_one(sg, mhdr, sizeof(*mhdr));
+		sg_set_buf(sg, mhdr, sizeof(*mhdr));
 	else
-		sg_init_one(sg, hdr, sizeof(*hdr));
+		sg_set_buf(sg, hdr, sizeof(*hdr));
 
 	num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 6266329..9b81af3 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset(
 				   &fops_i2400m_reset);
 }
 
-/*
- * Debug levels control; see debug.h
- */
-struct d_level D_LEVEL[] = {
-	D_SUBMODULE_DEFINE(control),
-	D_SUBMODULE_DEFINE(driver),
-	D_SUBMODULE_DEFINE(debugfs),
-	D_SUBMODULE_DEFINE(fw),
-	D_SUBMODULE_DEFINE(netdev),
-	D_SUBMODULE_DEFINE(rfkill),
-	D_SUBMODULE_DEFINE(rx),
-	D_SUBMODULE_DEFINE(tx),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
 
 #define __debugfs_register(prefix, name, parent)			\
 do {									\
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 5f98047..e80a0b6 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m)
 EXPORT_SYMBOL_GPL(i2400m_release);
 
 
+/*
+ * Debug levels control; see debug.h
+ */
+struct d_level D_LEVEL[] = {
+	D_SUBMODULE_DEFINE(control),
+	D_SUBMODULE_DEFINE(driver),
+	D_SUBMODULE_DEFINE(debugfs),
+	D_SUBMODULE_DEFINE(fw),
+	D_SUBMODULE_DEFINE(netdev),
+	D_SUBMODULE_DEFINE(rfkill),
+	D_SUBMODULE_DEFINE(rx),
+	D_SUBMODULE_DEFINE(tx),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
 static
 int __init i2400m_driver_init(void)
 {
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 8ef8735..a533ed6 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw)
  * it's done by reseting the chip.  To accomplish this we must
  * first cleanup any pending DMA, then restart stuff after a la
  * ath5k_init.
+ *
+ * Called with sc->lock.
  */
 static int
 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
@@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
+	int ret;
+
+	mutex_lock(&sc->lock);
 
 	sc->bintval = conf->beacon_int;
 	sc->power_level = conf->power_level;
 
-	return ath5k_chan_set(sc, conf->channel);
+	ret = ath5k_chan_set(sc, conf->channel);
+
+	mutex_unlock(&sc->lock);
+	return ret;
 }
 
 static int
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 0dc8eed..b35c881 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	priv->ucode_data_backup.len = data_size;
 	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
 
+	if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+	    !priv->ucode_data_backup.v_addr)
+		goto err_pci_alloc;
+
 	/* Initialization instructions and data */
 	if (init_size && init_data_size) {
 		priv->ucode_init.len = init_size;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index 4e75e8e..78df281 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
 
 	cck_power = min(cck_power, (u8)11);
-	ofdm_power = min(ofdm_power, (u8)35);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 
 	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
 			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
@@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	cck_power += priv->txpwr_base & 0xF;
 	cck_power = min(cck_power, (u8)35);
 
-	ofdm_power = min(ofdm_power, (u8)15);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 	ofdm_power += priv->txpwr_base >> 4;
 	ofdm_power = min(ofdm_power, (u8)35);
 
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index e31fb91..2aa117c 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -5,11 +5,15 @@
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o
+
+# pciehp should be linked before acpiphp in order to allow the native driver
+# to attempt to bind first. We can then fall back to generic support.
+
+obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)	+= acpiphp_ibm.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550)	+= cpcihp_zt5550.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC)	+= cpcihp_generic.o
-obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index b0e7de9..d8649e1 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work)
  * Tries hard not to re-enable already existing devices;
  * also handles scanning of subfunctions.
  */
-static void pci_rescan_slot(struct pci_dev *temp)
+static int pci_rescan_slot(struct pci_dev *temp)
 {
 	struct pci_bus *bus = temp->bus;
 	struct pci_dev *dev;
 	int func;
-	int retval;
 	u8 hdr_type;
+	int count = 0;
 
 	if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
 		temp->hdr_type = hdr_type & 0x7f;
@@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp)
 				dbg("New device on %s function %x:%x\n",
 					bus->name, temp->devfn >> 3,
 					temp->devfn & 7);
-				retval = pci_bus_add_device(dev);
-				if (retval)
-					dev_err(&dev->dev, "error adding "
-						"device, continuing.\n");
-				else
-					add_slot(dev);
+				count++;
 			}
 		}
 		/* multifunction device? */
 		if (!(hdr_type & 0x80))
-			return;
+			return count;
 
 		/* continue scanning for other functions */
 		for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) {
@@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp)
 					dbg("New device on %s function %x:%x\n",
 						bus->name, temp->devfn >> 3,
 						temp->devfn & 7);
-					retval = pci_bus_add_device(dev);
-					if (retval)
-						dev_err(&dev->dev, "error adding "
-							"device, continuing.\n");
-					else
-						add_slot(dev);
+					count++;
 				}
 			}
 		}
 	}
+
+	return count;
 }
 
 
@@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 {
 	unsigned int devfn;
 	struct pci_dev *dev;
+	int retval;
+	int found = 0;
 	dev = alloc_pci_dev();
 	if (!dev)
 		return;
@@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 	dev->sysdata = bus->sysdata;
 	for (devfn = 0; devfn < 0x100; devfn += 8) {
 		dev->devfn = devfn;
-		pci_rescan_slot(dev);
+		found += pci_rescan_slot(dev);
+	}
+
+	if (found) {
+		pci_bus_assign_resources(bus);
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			/* Skip already-added devices */
+			if (dev->is_added)
+					continue;
+			retval = pci_bus_add_device(dev);
+			if (retval)
+				dev_err(&dev->dev,
+					"Error adding device, continuing\n");
+			else
+				add_slot(dev);
+		}
+		pci_bus_add_devices(bus);
 	}
 	kfree(dev);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 896a15d..44f15ff 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
 	}
 }
 
+/*
+ * Essentially, this is ((1 << (1 << x)) - 1), but without the
+ * undefinedness of a << 32.
+ */
+static inline __attribute_const__ u32 msi_mask(unsigned x)
+{
+	static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
+	return mask[x];
+}
+
 static void msix_flush_writes(struct irq_desc *desc)
 {
 	struct msi_desc *entry;
@@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev)
 
 		/* All MSIs are unmasked by default, Mask them all */
 		pci_read_config_dword(dev, base, &maskbits);
-		temp = (1 << multi_msi_capable(control));
-		temp = ((temp - 1) & ~temp);
+		temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1);
 		maskbits |= temp;
 		pci_write_config_dword(dev, base, maskbits);
 		entry->msi_attrib.maskbits_mask = temp;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 9de07b7..ab1d615 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -370,6 +370,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
 	}
 
 	pci_save_state(pci_dev);
+	pci_dev->state_saved = true;
 	/*
 	 * This is for compatibility with existing code with legacy PM support.
 	 */
@@ -419,6 +420,7 @@ static int pci_legacy_resume(struct device *dev)
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
 	pci_restore_standard_config(pci_dev);
+	pci_dev->state_saved = false;
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
@@ -555,6 +557,13 @@ static int pci_pm_resume(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the suspend error path in which resume is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
@@ -660,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev)
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_HIBERNATE);
 
-	if (drv && drv->pm && drv->pm->poweroff) {
+	if (!drv || !drv->pm)
+		return 0;
+
+	if (drv->pm->poweroff) {
 		error = drv->pm->poweroff(dev);
 		suspend_report_result(drv->pm->poweroff, error);
 	}
@@ -710,6 +722,13 @@ static int pci_pm_restore(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the hibernation error path in which restore is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 17bd932..4880755 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1393,35 +1393,35 @@ int pci_restore_standard_config(struct pci_dev *dev)
 	pci_power_t prev_state;
 	int error;
 
-	pci_restore_state(dev);
 	pci_update_current_state(dev, PCI_D0);
 
 	prev_state = dev->current_state;
 	if (prev_state == PCI_D0)
-		return 0;
+		goto Restore;
 
 	error = pci_raw_set_power_state(dev, PCI_D0, false);
 	if (error)
 		return error;
 
-	if (pci_is_bridge(dev)) {
-		if (prev_state > PCI_D1)
-			mdelay(PCI_PM_BUS_WAIT);
-	} else {
-		switch(prev_state) {
-		case PCI_D3cold:
-		case PCI_D3hot:
-			mdelay(pci_pm_d3_delay);
-			break;
-		case PCI_D2:
-			udelay(PCI_PM_D2_DELAY);
-			break;
-		}
+	/*
+	 * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
+	 * we've made this assumption forever and it appears to be universally
+	 * satisfied.
+	 */
+	switch(prev_state) {
+	case PCI_D3cold:
+	case PCI_D3hot:
+		mdelay(pci_pm_d3_delay);
+		break;
+	case PCI_D2:
+		udelay(PCI_PM_D2_DELAY);
+		break;
 	}
 
 	dev->current_state = PCI_D0;
 
-	return 0;
+ Restore:
+	return pci_restore_state(dev);
 }
 
 /**
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index 366565a..c175e38 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -152,11 +152,7 @@ static void __exit bq24022_exit(void)
 	platform_driver_unregister(&bq24022_driver);
 }
 
-/*
- * make sure this is probed before gpio_vbus and pda_power,
- * but after asic3 or other GPIO expander drivers.
- */
-subsys_initcall(bq24022_init);
+module_init(bq24022_init);
 module_exit(bq24022_exit);
 
 MODULE_AUTHOR("Philipp Zabel");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 7aa3524..5056e23 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
 	struct platform_device *pdev;
 	int ret;
 
-	if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
+	if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
 		dev_err(wm8350->dev, "Invalid LED index %d\n", lednum);
 		return -ENODEV;
 	}
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 3547558..324c74d 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port)
 	channel->ch_bd->bd_ops->disable_receiver(channel);
 }
 
+static void jsm_tty_enable_ms(struct uart_port *port)
+{
+	/* Nothing needed */
+}
+
 static void jsm_tty_break(struct uart_port *port, int break_state)
 {
 	unsigned long lock_flags;
@@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = {
 	.start_tx	= jsm_tty_start_tx,
 	.send_xchar	= jsm_tty_send_xchar,
 	.stop_rx	= jsm_tty_stop_rx,
+	.enable_ms	= jsm_tty_enable_ms,
 	.break_ctl	= jsm_tty_break,
 	.startup	= jsm_tty_open,
 	.shutdown	= jsm_tty_close,
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 577c0d2..2291c5f 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -170,12 +170,17 @@ void asl_stop(struct whc *whc)
 void asl_update(struct whc *whc, uint32_t wusbcmd)
 {
 	struct wusbhc *wusbhc = &whc->wusbhc;
+	long t;
 
 	mutex_lock(&wusbhc->mutex);
 	if (wusbhc->active) {
 		whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
-		wait_event(whc->async_list_wq,
-			   (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0);
+		t = wait_event_timeout(
+			whc->async_list_wq,
+			(le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0,
+			msecs_to_jiffies(1000));
+		if (t == 0)
+			whc_hw_error(whc, "ASL update timeout");
 	}
 	mutex_unlock(&wusbhc->mutex);
 }
diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c
index d498e72..6afa2e3 100644
--- a/drivers/usb/host/whci/hw.c
+++ b/drivers/usb/host/whci/hw.c
@@ -87,3 +87,18 @@ out:
 
 	return ret;
 }
+
+/**
+ * whc_hw_error - recover from a hardware error
+ * @whc:    the WHCI HC that broke.
+ * @reason: a description of the failure.
+ *
+ * Recover from broken hardware with a full reset.
+ */
+void whc_hw_error(struct whc *whc, const char *reason)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+
+	dev_err(&whc->umc->dev, "hardware error: %s\n", reason);
+	wusbhc_reset_all(wusbhc);
+}
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 2ae5abf..7dc85a0 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc)
 void pzl_update(struct whc *whc, uint32_t wusbcmd)
 {
 	struct wusbhc *wusbhc = &whc->wusbhc;
+	long t;
 
 	mutex_lock(&wusbhc->mutex);
 	if (wusbhc->active) {
 		whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
-		wait_event(whc->periodic_list_wq,
-			   (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0);
+		t = wait_event_timeout(
+			whc->periodic_list_wq,
+			(le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0,
+			msecs_to_jiffies(1000));
+		if (t == 0)
+			whc_hw_error(whc, "PZL update timeout");
 	}
 	mutex_unlock(&wusbhc->mutex);
 }
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index 0f3540f..d3543a1 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc);
 /* hw.c */
 void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
 int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
+void whc_hw_error(struct whc *whc, const char *reason);
 
 /* wusb.c */
 int whc_wusbhc_start(struct wusbhc *wusbhc);
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index e2e7e4b..8e18141 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
 			  | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
 	port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
 	if (wusb_dev) {
+		dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx);
 		if (!list_empty(&wusb_dev->cack_node))
 			list_del_init(&wusb_dev->cack_node);
 		/* For the one in cack_add() */
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index 3937bf6..9fe4246 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
 	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
 	struct wusb_dev *wusb_dev = port->wusb_dev;
 
+	if (wusb_dev == NULL)
+		return -ENOTCONN;
+
 	port->status |= USB_PORT_STAT_RESET;
 	port->change |= USB_PORT_STAT_C_RESET;
 
diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
index c8185e6..c13cec7 100644
--- a/drivers/uwb/allocator.c
+++ b/drivers/uwb/allocator.c
@@ -15,7 +15,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/uwb.h>
 
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index 2b4f940..4f5ca99 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
 	} else
 		dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
 
-	spin_lock(&rc->rsvs_lock);
+	spin_lock_bh(&rc->rsvs_lock);
 	if (rc->set_drp_ie_pending > 1) {
 		rc->set_drp_ie_pending = 0;
 		uwb_rsv_queue_update(rc);	
 	} else {
 		rc->set_drp_ie_pending = 0;	
 	}
-	spin_unlock(&rc->rsvs_lock);
+	spin_unlock_bh(&rc->rsvs_lock);
 }
 
 /**
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
index ec6eecb..6b76f4b 100644
--- a/drivers/uwb/rsv.c
+++ b/drivers/uwb/rsv.c
@@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv)
 		devaddr = rsv->target.devaddr;
 	uwb_dev_addr_print(target, sizeof(target), &devaddr);
 
-	dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state));
+	dev_dbg(dev, "rsv %s %s -> %s: %s\n",
+		text, owner, target, uwb_rsv_state_str(rsv->state));
 }
 
 static void uwb_rsv_release(struct kref *kref)
@@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv)
 
 	if (uwb_rsv_is_owner(rsv))
 		uwb_rsv_put_stream(rsv);
-	
-	del_timer_sync(&rsv->timer);
+
 	uwb_dev_put(rsv->owner);
 	if (rsv->target.type == UWB_RSV_TARGET_DEV)
 		uwb_dev_put(rsv->target.dev);
@@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc)
  */
 void uwb_rsv_sched_update(struct uwb_rc *rc)
 {
-	spin_lock(&rc->rsvs_lock);
+	spin_lock_bh(&rc->rsvs_lock);
 	if (!delayed_work_pending(&rc->rsv_update_work)) {
 		if (rc->set_drp_ie_pending > 0) {
 			rc->set_drp_ie_pending++;
@@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc)
 		uwb_rsv_queue_update(rc);
 	}
 unlock:
-	spin_unlock(&rc->rsvs_lock);
+	spin_unlock_bh(&rc->rsvs_lock);
 }
 
 /*
@@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc)
 
 	mutex_lock(&rc->rsvs_mutex);
 	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
-		uwb_rsv_remove(rsv);
+		if (rsv->state != UWB_RSV_STATE_NONE)
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+		del_timer_sync(&rsv->timer);
 	}
 	/* Cancel any postponed update. */
 	rc->set_drp_ie_pending = 0;
 	mutex_unlock(&rc->rsvs_mutex);
 
 	cancel_delayed_work_sync(&rc->rsv_update_work);
+	flush_workqueue(rc->rsv_workq);
+
+	mutex_lock(&rc->rsvs_mutex);
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		uwb_rsv_remove(rsv);
+	}
+	mutex_unlock(&rc->rsvs_mutex);
 }
 
 void uwb_rsv_init(struct uwb_rc *rc)
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c
index c50c7cf..2745b85 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/aty/mach64_ct.c
@@ -8,6 +8,9 @@
 #include <asm/io.h>
 #include <video/mach64.h>
 #include "atyfb.h"
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif
 
 #undef DEBUG
 
@@ -536,6 +539,14 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info,
 	pll->ct.xclk_post_div_real = postdividers[xpost_div];
 	pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
 
+#ifdef CONFIG_PPC
+	if (machine_is(powermac)) {
+		/* Override PLL_EXT_CNTL & 0x07. */
+		pll->ct.xclk_post_div = xpost_div;
+		pll->ct.xclk_ref_div = 1;
+	}
+#endif
+
 #ifdef DEBUG
 	pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) /
 			(par->ref_clk_per * pll->ct.pll_ref_div);
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index bef6b45..330aacb 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -192,7 +192,7 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 		drv = container_of(vp_dev->vdev.dev.driver,
 				   struct virtio_driver, driver);
 
-		if (drv->config_changed)
+		if (drv && drv->config_changed)
 			drv->config_changed(&vp_dev->vdev);
 	}
 
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 2ba8f95..efa4b36 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	target_bytes = memparse(buf, &endchar);
+	target_bytes = simple_strtoull(buf, &endchar, 0) * 1024;
 
 	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
 
@@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev,
 static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR,
 		   show_target_kb, store_target_kb);
 
+
+static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr,
+			      char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (u64)balloon_stats.target_pages << PAGE_SHIFT);
+}
+
+static ssize_t store_target(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf,
+			    size_t count)
+{
+	char *endchar;
+	unsigned long long target_bytes;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	target_bytes = memparse(buf, &endchar);
+
+	balloon_set_new_target(target_bytes >> PAGE_SHIFT);
+
+	return count;
+}
+
+static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR,
+		   show_target, store_target);
+
+
 static struct sysdev_attribute *balloon_attrs[] = {
 	&attr_target_kb,
+	&attr_target,
 };
 
 static struct attribute *balloon_info_attrs[] = {
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 77ebc3c..549b014 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -140,7 +140,6 @@ int bio_integrity_add_page(struct bio *bio, struct page *page,
 
 	iv = bip_vec_idx(bip, bip->bip_vcnt);
 	BUG_ON(iv == NULL);
-	BUG_ON(iv->bv_page != NULL);
 
 	iv->bv_page = page;
 	iv->bv_len = len;
@@ -465,7 +464,7 @@ static int bio_integrity_verify(struct bio *bio)
 
 		if (ret) {
 			kunmap_atomic(kaddr, KM_USER0);
-			break;
+			return ret;
 		}
 
 		sectors = bv->bv_len / bi->sector_size;
@@ -493,18 +492,13 @@ static void bio_integrity_verify_fn(struct work_struct *work)
 	struct bio_integrity_payload *bip =
 		container_of(work, struct bio_integrity_payload, bip_work);
 	struct bio *bio = bip->bip_bio;
-	int error = bip->bip_error;
+	int error;
 
-	if (bio_integrity_verify(bio)) {
-		clear_bit(BIO_UPTODATE, &bio->bi_flags);
-		error = -EIO;
-	}
+	error = bio_integrity_verify(bio);
 
 	/* Restore original bio completion handler */
 	bio->bi_end_io = bip->bip_end_io;
-
-	if (bio->bi_end_io)
-		bio->bi_end_io(bio, error);
+	bio_endio(bio, error);
 }
 
 /**
@@ -525,7 +519,17 @@ void bio_integrity_endio(struct bio *bio, int error)
 
 	BUG_ON(bip->bip_bio != bio);
 
-	bip->bip_error = error;
+	/* In case of an I/O error there is no point in verifying the
+	 * integrity metadata.  Restore original bio end_io handler
+	 * and run it.
+	 */
+	if (error) {
+		bio->bi_end_io = bip->bip_end_io;
+		bio_endio(bio, error);
+
+		return;
+	}
+
 	INIT_WORK(&bip->bip_work, bio_integrity_verify_fn);
 	queue_work(kintegrityd_wq, &bip->bip_work);
 }
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 5235c67..c8f8d59 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -538,6 +538,7 @@ static int dev_ifsioc(unsigned int fd, unsigned int cmd, unsigned long arg)
 		 * cannot be fixed without breaking all existing apps.
 		 */
 		case TUNSETIFF:
+		case TUNGETIFF:
 		case SIOCGIFFLAGS:
 		case SIOCGIFMETRIC:
 		case SIOCGIFMTU:
@@ -1982,6 +1983,11 @@ COMPATIBLE_IOCTL(TUNSETNOCSUM)
 COMPATIBLE_IOCTL(TUNSETDEBUG)
 COMPATIBLE_IOCTL(TUNSETPERSIST)
 COMPATIBLE_IOCTL(TUNSETOWNER)
+COMPATIBLE_IOCTL(TUNSETLINK)
+COMPATIBLE_IOCTL(TUNSETGROUP)
+COMPATIBLE_IOCTL(TUNGETFEATURES)
+COMPATIBLE_IOCTL(TUNSETOFFLOAD)
+COMPATIBLE_IOCTL(TUNSETTXFILTER)
 /* Big V */
 COMPATIBLE_IOCTL(VT_SETMODE)
 COMPATIBLE_IOCTL(VT_GETMODE)
@@ -2573,6 +2579,7 @@ HANDLE_IOCTL(SIOCGIFPFLAGS, dev_ifsioc)
 HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc)
 HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc)
 HANDLE_IOCTL(TUNSETIFF, dev_ifsioc)
+HANDLE_IOCTL(TUNGETIFF, dev_ifsioc)
 HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl)
 HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl)
 HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl)
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 69a3d19..4db4ffa 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1358,7 +1358,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	struct fake_dirent *fde;
 
 	blocksize =  dir->i_sb->s_blocksize;
-	dxtrace(printk("Creating index\n"));
+	dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino));
 	retval = ext3_journal_get_write_access(handle, bh);
 	if (retval) {
 		ext3_std_error(dir->i_sb, retval);
@@ -1367,6 +1367,19 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	}
 	root = (struct dx_root *) bh->b_data;
 
+	/* The 0th block becomes the root, move the dirents out */
+	fde = &root->dotdot;
+	de = (struct ext3_dir_entry_2 *)((char *)fde +
+			ext3_rec_len_from_disk(fde->rec_len));
+	if ((char *) de >= (((char *) root) + blocksize)) {
+		ext3_error(dir->i_sb, __func__,
+			   "invalid rec_len for '..' in inode %lu",
+			   dir->i_ino);
+		brelse(bh);
+		return -EIO;
+	}
+	len = ((char *) root) + blocksize - (char *) de;
+
 	bh2 = ext3_append (handle, dir, &block, &retval);
 	if (!(bh2)) {
 		brelse(bh);
@@ -1375,11 +1388,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	EXT3_I(dir)->i_flags |= EXT3_INDEX_FL;
 	data1 = bh2->b_data;
 
-	/* The 0th block becomes the root, move the dirents out */
-	fde = &root->dotdot;
-	de = (struct ext3_dir_entry_2 *)((char *)fde +
-			ext3_rec_len_from_disk(fde->rec_len));
-	len = ((char *) root) + blocksize - (char *) de;
 	memcpy (data1, de, len);
 	de = (struct ext3_dir_entry_2 *) data1;
 	top = data1 + len;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 6bba06b..9a50b80 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -684,15 +684,15 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
 		gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
 			continue;
-		desc_count += le16_to_cpu(gdp->bg_free_blocks_count);
+		desc_count += ext4_free_blks_count(sb, gdp);
 		brelse(bitmap_bh);
 		bitmap_bh = ext4_read_block_bitmap(sb, i);
 		if (bitmap_bh == NULL)
 			continue;
 
 		x = ext4_count_free(bitmap_bh, sb->s_blocksize);
-		printk(KERN_DEBUG "group %lu: stored = %d, counted = %u\n",
-			i, le16_to_cpu(gdp->bg_free_blocks_count), x);
+		printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
+			i, ext4_free_blks_count(sb, gdp), x);
 		bitmap_count += x;
 	}
 	brelse(bitmap_bh);
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index c668e43..aafc9eb 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1206,8 +1206,11 @@ static inline void ext4_r_blocks_count_set(struct ext4_super_block *es,
 
 static inline loff_t ext4_isize(struct ext4_inode *raw_inode)
 {
-	return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) |
-		le32_to_cpu(raw_inode->i_size_lo);
+	if (S_ISREG(le16_to_cpu(raw_inode->i_mode)))
+		return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) |
+			le32_to_cpu(raw_inode->i_size_lo);
+	else
+		return (loff_t) le32_to_cpu(raw_inode->i_size_lo);
 }
 
 static inline void ext4_isize_set(struct ext4_inode *raw_inode, loff_t i_size)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 54bf062..e2eab19 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3048,7 +3048,7 @@ retry:
 			WARN_ON(ret <= 0);
 			printk(KERN_ERR "%s: ext4_ext_get_blocks "
 				    "returned error inode#%lu, block=%u, "
-				    "max_blocks=%lu", __func__,
+				    "max_blocks=%u", __func__,
 				    inode->i_ino, block, max_blocks);
 #endif
 			ext4_mark_inode_dirty(handle, inode);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index a6444ce..03ba20b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -360,9 +360,9 @@ static int ext4_block_to_path(struct inode *inode,
 		final = ptrs;
 	} else {
 		ext4_warning(inode->i_sb, "ext4_block_to_path",
-				"block %lu > max",
+				"block %lu > max in inode %lu",
 				i_block + direct_blocks +
-				indirect_blocks + double_blocks);
+				indirect_blocks + double_blocks, inode->i_ino);
 	}
 	if (boundary)
 		*boundary = final - 1 - (i_block & (ptrs - 1));
@@ -2821,9 +2821,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
 		filemap_write_and_wait(mapping);
 	}
 
-	BUG_ON(!EXT4_JOURNAL(inode) &&
-	       EXT4_I(inode)->i_state & EXT4_STATE_JDATA);
-
 	if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) {
 		/*
 		 * This is a REALLY heavyweight approach, but the use of
@@ -3622,7 +3619,7 @@ static void ext4_free_data(handle_t *handle, struct inode *inode,
 		 * block pointed to itself, it would have been detached when
 		 * the block was cleared. Check for this instead of OOPSing.
 		 */
-		if (bh2jh(this_bh))
+		if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh))
 			ext4_handle_dirty_metadata(handle, inode, this_bh);
 		else
 			ext4_error(inode->i_sb, __func__,
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 918aec0..deba54f 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3025,7 +3025,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 		goto out_err;
 
 	ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group,
-			gdp->bg_free_blocks_count);
+			ext4_free_blks_count(sb, gdp));
 
 	err = ext4_journal_get_write_access(handle, gdp_bh);
 	if (err)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index fec0b4c..ba702bd 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1368,7 +1368,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	struct fake_dirent *fde;
 
 	blocksize =  dir->i_sb->s_blocksize;
-	dxtrace(printk(KERN_DEBUG "Creating index\n"));
+	dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino));
 	retval = ext4_journal_get_write_access(handle, bh);
 	if (retval) {
 		ext4_std_error(dir->i_sb, retval);
@@ -1377,6 +1377,20 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	}
 	root = (struct dx_root *) bh->b_data;
 
+	/* The 0th block becomes the root, move the dirents out */
+	fde = &root->dotdot;
+	de = (struct ext4_dir_entry_2 *)((char *)fde +
+		ext4_rec_len_from_disk(fde->rec_len));
+	if ((char *) de >= (((char *) root) + blocksize)) {
+		ext4_error(dir->i_sb, __func__,
+			   "invalid rec_len for '..' in inode %lu",
+			   dir->i_ino);
+		brelse(bh);
+		return -EIO;
+	}
+	len = ((char *) root) + blocksize - (char *) de;
+
+	/* Allocate new block for the 0th block's dirents */
 	bh2 = ext4_append(handle, dir, &block, &retval);
 	if (!(bh2)) {
 		brelse(bh);
@@ -1385,11 +1399,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
 	EXT4_I(dir)->i_flags |= EXT4_INDEX_FL;
 	data1 = bh2->b_data;
 
-	/* The 0th block becomes the root, move the dirents out */
-	fde = &root->dotdot;
-	de = (struct ext4_dir_entry_2 *)((char *)fde +
-		ext4_rec_len_from_disk(fde->rec_len));
-	len = ((char *) root) + blocksize - (char *) de;
 	memcpy (data1, de, len);
 	de = (struct ext4_dir_entry_2 *) data1;
 	top = data1 + len;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index c328be5..c06886a 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -861,12 +861,13 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	gdp = (struct ext4_group_desc *)((char *)primary->b_data +
 					 gdb_off * EXT4_DESC_SIZE(sb));
 
+	memset(gdp, 0, EXT4_DESC_SIZE(sb));
 	ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
 	ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
 	ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */
 	ext4_free_blks_set(sb, gdp, input->free_blocks_count);
 	ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb));
-	gdp->bg_flags |= cpu_to_le16(EXT4_BG_INODE_ZEROED);
+	gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED);
 	gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp);
 
 	/*
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 5667530..eb34300 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -37,10 +37,10 @@
 #include <linux/proc_fs.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/math64.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
-#include <asm/div64.h>
 
 EXPORT_SYMBOL(jbd2_journal_start);
 EXPORT_SYMBOL(jbd2_journal_restart);
@@ -846,8 +846,8 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v)
 	    jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
 	seq_printf(seq, "  %ums logging transaction\n",
 	    jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
-	seq_printf(seq, "  %luus average transaction commit time\n",
-		   do_div(s->journal->j_average_commit_time, 1000));
+	seq_printf(seq, "  %lluus average transaction commit time\n",
+		   div_u64(s->journal->j_average_commit_time, 1000));
 	seq_printf(seq, "  %lu handles per transaction\n",
 	    s->stats->u.run.rs_handle_count / s->stats->ts_tid);
 	seq_printf(seq, "  %lu blocks per transaction\n",
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 12e9a29..2124c06 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -41,6 +41,7 @@ header-y += baycom.h
 header-y += bfs_fs.h
 header-y += blkpg.h
 header-y += bpqether.h
+header-y += bsg.h
 header-y += can.h
 header-y += cdk.h
 header-y += chio.h
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
index 9e01729..2c87316 100644
--- a/include/linux/aio_abi.h
+++ b/include/linux/aio_abi.h
@@ -27,6 +27,7 @@
 #ifndef __LINUX__AIO_ABI_H
 #define __LINUX__AIO_ABI_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 typedef unsigned long	aio_context_t;
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index e9ebac2..d34c187 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_ATALK_H__
 #define __LINUX_ATALK_H__
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 /*
diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h
index 52bf72a..fdb2629 100644
--- a/include/linux/atmbr2684.h
+++ b/include/linux/atmbr2684.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_ATMBR2684_H
 #define _LINUX_ATMBR2684_H
 
+#include <linux/types.h>
 #include <linux/atm.h>
 #include <linux/if.h>		/* For IFNAMSIZ */
 
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
index 55fa478..8b49ac4 100644
--- a/include/linux/auto_fs4.h
+++ b/include/linux/auto_fs4.h
@@ -12,6 +12,7 @@
 #define _LINUX_AUTO_FS4_H
 
 /* Include common v3 definitions */
+#include <linux/types.h>
 #include <linux/auto_fs.h>
 
 /* autofs v4 definitions */
diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h
index 8ed6dfdc..1c0b355 100644
--- a/include/linux/bfs_fs.h
+++ b/include/linux/bfs_fs.h
@@ -6,6 +6,8 @@
 #ifndef _LINUX_BFS_FS_H
 #define _LINUX_BFS_FS_H
 
+#include <linux/types.h>
+
 #define BFS_BSIZE_BITS		9
 #define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
 
@@ -17,7 +19,6 @@
 #define BFS_VDIR 2L
 #define BFS_VREG 1L
 
-
 /* BFS inode layout on disk */
 struct bfs_inode {
 	__le16 i_ino;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 18462c5..2aa283a 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -144,7 +144,7 @@ struct bio {
  * bit 1 -- rw-ahead when set
  * bit 2 -- barrier
  *	Insert a serialization point in the IO queue, forcing previously
- *	submitted IO to be completed before this oen is issued.
+ *	submitted IO to be completed before this one is issued.
  * bit 3 -- synchronous I/O hint: the block layer will unplug immediately
  *	Note that this does NOT indicate that the IO itself is sync, just
  *	that the block layer will not postpone issue of this IO by plugging.
@@ -163,12 +163,33 @@ struct bio {
 #define BIO_RW		0	/* Must match RW in req flags (blkdev.h) */
 #define BIO_RW_AHEAD	1	/* Must match FAILFAST in req flags */
 #define BIO_RW_BARRIER	2
-#define BIO_RW_SYNC	3
-#define BIO_RW_META	4
-#define BIO_RW_DISCARD	5
-#define BIO_RW_FAILFAST_DEV		6
-#define BIO_RW_FAILFAST_TRANSPORT	7
-#define BIO_RW_FAILFAST_DRIVER		8
+#define BIO_RW_SYNCIO	3
+#define BIO_RW_UNPLUG	4
+#define BIO_RW_META	5
+#define BIO_RW_DISCARD	6
+#define BIO_RW_FAILFAST_DEV		7
+#define BIO_RW_FAILFAST_TRANSPORT	8
+#define BIO_RW_FAILFAST_DRIVER		9
+
+#define BIO_RW_SYNC	(BIO_RW_SYNCIO | BIO_RW_UNPLUG)
+
+#define bio_rw_flagged(bio, flag)	((bio)->bi_rw & (1 << (flag)))
+
+/*
+ * Old defines, these should eventually be replaced by direct usage of
+ * bio_rw_flagged()
+ */
+#define bio_barrier(bio)	bio_rw_flagged(bio, BIO_RW_BARRIER)
+#define bio_sync(bio)		bio_rw_flagged(bio, BIO_RW_SYNCIO)
+#define bio_unplug(bio)		bio_rw_flagged(bio, BIO_RW_UNPLUG)
+#define bio_failfast_dev(bio)	bio_rw_flagged(bio, BIO_RW_FAILFAST_DEV)
+#define bio_failfast_transport(bio)	\
+		bio_rw_flagged(bio, BIO_RW_FAILFAST_TRANSPORT)
+#define bio_failfast_driver(bio) 	\
+		bio_rw_flagged(bio, BIO_RW_FAILFAST_DRIVER)
+#define bio_rw_ahead(bio)	bio_rw_flagged(bio, BIO_RW_AHEAD)
+#define bio_rw_meta(bio)	bio_rw_flagged(bio, BIO_RW_META)
+#define bio_discard(bio)	bio_rw_flagged(bio, BIO_RW_DISCARD)
 
 /*
  * upper 16 bits of bi_rw define the io priority of this bio
@@ -193,15 +214,6 @@ struct bio {
 #define bio_offset(bio)		bio_iovec((bio))->bv_offset
 #define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
 #define bio_sectors(bio)	((bio)->bi_size >> 9)
-#define bio_barrier(bio)	((bio)->bi_rw & (1 << BIO_RW_BARRIER))
-#define bio_sync(bio)		((bio)->bi_rw & (1 << BIO_RW_SYNC))
-#define bio_failfast_dev(bio)	((bio)->bi_rw &	(1 << BIO_RW_FAILFAST_DEV))
-#define bio_failfast_transport(bio)	\
-	((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT))
-#define bio_failfast_driver(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DRIVER))
-#define bio_rw_ahead(bio)	((bio)->bi_rw & (1 << BIO_RW_AHEAD))
-#define bio_rw_meta(bio)	((bio)->bi_rw & (1 << BIO_RW_META))
-#define bio_discard(bio)	((bio)->bi_rw & (1 << BIO_RW_DISCARD))
 #define bio_empty_barrier(bio)	(bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
 
 static inline unsigned int bio_cur_sectors(struct bio *bio)
@@ -312,7 +324,6 @@ struct bio_integrity_payload {
 	void			*bip_buf;	/* generated integrity data */
 	bio_end_io_t		*bip_end_io;	/* saved I/O completion fn */
 
-	int			bip_error;	/* saved I/O error */
 	unsigned int		bip_size;
 
 	unsigned short		bip_pool;	/* pool the ivec came from */
@@ -440,12 +451,13 @@ extern struct biovec_slab bvec_slabs[BIOVEC_NR_POOLS] __read_mostly;
 
 #ifdef CONFIG_HIGHMEM
 /*
- * remember to add offset! and never ever reenable interrupts between a
- * bvec_kmap_irq and bvec_kunmap_irq!!
+ * remember never ever reenable interrupts between a bvec_kmap_irq and
+ * bvec_kunmap_irq!
  *
  * This function MUST be inlined - it plays with the CPU interrupt flags.
  */
-static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
+static __always_inline char *bvec_kmap_irq(struct bio_vec *bvec,
+		unsigned long *flags)
 {
 	unsigned long addr;
 
@@ -461,7 +473,8 @@ static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
 	return (char *) addr + bvec->bv_offset;
 }
 
-static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
+static __always_inline void bvec_kunmap_irq(char *buffer,
+		unsigned long *flags)
 {
 	unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 044467e..dcaa0fd 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -108,6 +108,7 @@ enum rq_flag_bits {
 	__REQ_RW_META,		/* metadata io request */
 	__REQ_COPY_USER,	/* contains copies of user pages */
 	__REQ_INTEGRITY,	/* integrity metadata has been remapped */
+	__REQ_UNPLUG,		/* unplug queue on submission */
 	__REQ_NR_BITS,		/* stops here */
 };
 
@@ -134,6 +135,7 @@ enum rq_flag_bits {
 #define REQ_RW_META	(1 << __REQ_RW_META)
 #define REQ_COPY_USER	(1 << __REQ_COPY_USER)
 #define REQ_INTEGRITY	(1 << __REQ_INTEGRITY)
+#define REQ_UNPLUG	(1 << __REQ_UNPLUG)
 
 #define BLK_MAX_CDB	16
 
@@ -449,6 +451,11 @@ struct request_queue
 #define QUEUE_FLAG_STACKABLE   13	/* supports request stacking */
 #define QUEUE_FLAG_NONROT      14	/* non-rotational device (SSD) */
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
+#define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
+
+#define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
+				 (1 << QUEUE_FLAG_CLUSTER) |		\
+				 (1 << QUEUE_FLAG_STACKABLE))
 
 static inline int queue_is_locked(struct request_queue *q)
 {
@@ -565,6 +572,7 @@ enum {
 #define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
 #define blk_queue_nomerges(q)	test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
 #define blk_queue_nonrot(q)	test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
+#define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
 #define blk_queue_flushing(q)	((q)->ordseq)
 #define blk_queue_stackable(q)	\
 	test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 1dba349..25379cb 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,6 +1,7 @@
 #ifndef BLKTRACE_H
 #define BLKTRACE_H
 
+#include <linux/types.h>
 #ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/relay.h>
diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h
index 7f29327..1432b27 100644
--- a/include/linux/can/bcm.h
+++ b/include/linux/can/bcm.h
@@ -14,6 +14,8 @@
 #ifndef CAN_BCM_H
 #define CAN_BCM_H
 
+#include <linux/types.h>
+
 /**
  * struct bcm_msg_head - head of messages to/from the broadcast manager
  * @opcode:    opcode, see enum below.
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 02bdb76..1b98725 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -69,10 +69,6 @@ typedef struct __user_cap_data_struct {
 #define VFS_CAP_U32             VFS_CAP_U32_2
 #define VFS_CAP_REVISION	VFS_CAP_REVISION_2
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
-extern int file_caps_enabled;
-#endif
-
 struct vfs_cap_data {
 	__le32 magic_etc;            /* Little endian */
 	struct {
@@ -96,6 +92,10 @@ struct vfs_cap_data {
 #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
 #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
 
+#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
+extern int file_caps_enabled;
+#endif
+
 typedef struct kernel_cap_struct {
 	__u32 cap[_KERNEL_CAPABILITY_U32S];
 } kernel_cap_t;
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index 0b49e08d..78e9047 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -11,6 +11,7 @@
 #ifndef	_LINUX_CDROM_H
 #define	_LINUX_CDROM_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 /*******************************************************
diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h
index 4f53abf..3753c33 100644
--- a/include/linux/cgroupstats.h
+++ b/include/linux/cgroupstats.h
@@ -15,6 +15,7 @@
 #ifndef _LINUX_CGROUPSTATS_H
 #define _LINUX_CGROUPSTATS_H
 
+#include <linux/types.h>
 #include <linux/taskstats.h>
 
 /*
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index cea1536..3a1dbba 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -36,6 +36,7 @@ enum clock_event_nofitiers {
 	CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
 	CLOCK_EVT_NOTIFY_SUSPEND,
 	CLOCK_EVT_NOTIFY_RESUME,
+	CLOCK_EVT_NOTIFY_CPU_DYING,
 	CLOCK_EVT_NOTIFY_CPU_DEAD,
 };
 
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 18d5fdb..2dd2124 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -9,6 +9,8 @@
 #ifndef __DLM_PLOCK_DOT_H__
 #define __DLM_PLOCK_DOT_H__
 
+#include <linux/types.h>
+
 #define DLM_PLOCK_MISC_NAME		"dlm_plock"
 
 #define DLM_PLOCK_VERSION_MAJOR	1
diff --git a/include/linux/dn.h b/include/linux/dn.h
index 02bba04..fe99908 100644
--- a/include/linux/dn.h
+++ b/include/linux/dn.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_DN_H
 #define _LINUX_DN_H
 
+#include <linux/types.h>
+
 /*
 
 	DECnet Data Structures and Constants
diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h
index 89412e1..bb0df2a 100644
--- a/include/linux/dvb/audio.h
+++ b/include/linux/dvb/audio.h
@@ -24,12 +24,7 @@
 #ifndef _DVBAUDIO_H_
 #define _DVBAUDIO_H_
 
-#ifdef __KERNEL__
 #include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
 
 typedef enum {
 	AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */
diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h
index 402fb7a..fef9437 100644
--- a/include/linux/dvb/dmx.h
+++ b/include/linux/dvb/dmx.h
@@ -24,7 +24,7 @@
 #ifndef _DVBDMX_H_
 #define _DVBDMX_H_
 
-#include <asm/types.h>
+#include <linux/types.h>
 #ifdef __KERNEL__
 #include <linux/time.h>
 #else
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index 55026b1..51c8d2d 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -26,8 +26,7 @@
 #ifndef _DVBFRONTEND_H_
 #define _DVBFRONTEND_H_
 
-#include <asm/types.h>
-
+#include <linux/types.h>
 
 typedef enum fe_type {
 	FE_QPSK,
diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h
index 5be474b..f451e7e 100644
--- a/include/linux/dvb/net.h
+++ b/include/linux/dvb/net.h
@@ -24,8 +24,7 @@
 #ifndef _DVBNET_H_
 #define _DVBNET_H_
 
-#include <asm/types.h>
-
+#include <linux/types.h>
 
 struct dvb_net_if {
 	__u16 pid;
diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h
index 50839fe..bd49c3e 100644
--- a/include/linux/dvb/video.h
+++ b/include/linux/dvb/video.h
@@ -24,17 +24,14 @@
 #ifndef _DVBVIDEO_H_
 #define _DVBVIDEO_H_
 
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
 #include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/compiler.h>
 #else
-#include <asm/types.h>
 #include <stdint.h>
 #include <time.h>
 #endif
 
-
 typedef enum {
 	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
 	VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 5d747c5..4cbd0fe 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,6 +30,8 @@
 #ifndef _LINUX_EDD_H
 #define _LINUX_EDD_H
 
+#include <linux/types.h>
+
 #define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
 				   in boot_params - treat this as 1 byte  */
 #define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h
index ff1945e..a01be90 100644
--- a/include/linux/efs_fs_sb.h
+++ b/include/linux/efs_fs_sb.h
@@ -9,6 +9,7 @@
 #ifndef __EFS_FS_SB_H__
 #define __EFS_FS_SB_H__
 
+#include <linux/types.h>
 #include <linux/magic.h>
 
 /* EFS superblock magic numbers */
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
index 9f5b745..7cd2e80 100644
--- a/include/linux/elf-fdpic.h
+++ b/include/linux/elf-fdpic.h
@@ -58,11 +58,13 @@ struct elf_fdpic_params {
 #define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
 };
 
+#ifdef __KERNEL__
 #ifdef CONFIG_MMU
 extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
 				      struct elf_fdpic_params *interp_params,
 				      unsigned long *start_stack,
 				      unsigned long *start_brk);
 #endif
+#endif /* __KERNEL__ */
 
 #endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 0b61ca4..45a937b 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -377,6 +377,7 @@ typedef struct elf64_note {
   Elf64_Word n_type;	/* Content type */
 } Elf64_Nhdr;
 
+#ifdef __KERNEL__
 #if ELF_CLASS == ELFCLASS32
 
 extern Elf32_Dyn _DYNAMIC [];
@@ -404,5 +405,5 @@ static inline int elf_coredump_extra_notes_write(struct file *file,
 extern int elf_coredump_extra_notes_size(void);
 extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
 #endif
-
+#endif /* __KERNEL__ */
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index 92f8d4f..ceb1454 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_ERRQUEUE_H
 #define _LINUX_ERRQUEUE_H 1
 
+#include <linux/types.h>
+
 struct sock_extended_err
 {
 	__u32	ee_errno;	
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 7da02c9..b834ef6 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_GENERIC_NETLINK_H
 #define __LINUX_GENERIC_NETLINK_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 
 #define GENL_NAMSIZ	16	/* length of family name */
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
index 14d0df0..c56b4bc 100644
--- a/include/linux/gfs2_ondisk.h
+++ b/include/linux/gfs2_ondisk.h
@@ -10,6 +10,8 @@
 #ifndef __GFS2_ONDISK_DOT_H__
 #define __GFS2_ONDISK_DOT_H__
 
+#include <linux/types.h>
+
 #define GFS2_MAGIC		0x01161970
 #define GFS2_BASIC_BLOCK	512
 #define GFS2_BASIC_BLOCK_SHIFT	9
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 81aa84d..fa8ee9c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -791,6 +791,7 @@ dbg_hid(const char *fmt, ...)
 		__FILE__ , ## arg)
 #endif /* HID_FF */
 
+#ifdef __KERNEL__
 #ifdef CONFIG_HID_COMPAT
 #define HID_COMPAT_LOAD_DRIVER(name)	\
 /* prototype to avoid sparse warning */	\
@@ -804,6 +805,7 @@ EXPORT_SYMBOL(hid_compat_##name)
 	extern void hid_compat_##name(void);	\
 	hid_compat_##name();			\
 } while (0)
+#endif /* __KERNEL__ */
 
 #endif
 
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index c760ae0..bb6f58b 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -27,6 +27,8 @@
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
 
+#include <linux/types.h>
+
 /*
  * The event structure itself
  */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index a93a8dd..10d701e 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_ICMPV6_H
 #define _LINUX_ICMPV6_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 struct icmp6hdr {
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
index 43f3bed..a60c821 100644
--- a/include/linux/if_addr.h
+++ b/include/linux/if_addr.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_IF_ADDR_H
 #define __LINUX_IF_ADDR_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 
 struct ifaddrmsg
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
index 9fe79c9..89571f6 100644
--- a/include/linux/if_addrlabel.h
+++ b/include/linux/if_addrlabel.h
@@ -10,6 +10,8 @@
 #ifndef __LINUX_IF_ADDRLABEL_H
 #define __LINUX_IF_ADDRLABEL_H
 
+#include <linux/types.h>
+
 struct ifaddrlblmsg
 {
 	__u8		ifal_family;		/* Address family */
diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h
index 376a34e..6ed7f1b 100644
--- a/include/linux/if_fc.h
+++ b/include/linux/if_fc.h
@@ -20,6 +20,7 @@
 #ifndef _LINUX_IF_FC_H
 #define _LINUX_IF_FC_H
 
+#include <linux/types.h>
 
 #define FC_ALEN	6		/* Octets in one ethernet addr	 */
 #define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
index f0f2351..4a7c994 100644
--- a/include/linux/if_hippi.h
+++ b/include/linux/if_hippi.h
@@ -22,6 +22,7 @@
 #ifndef _LINUX_IF_HIPPI_H
 #define _LINUX_IF_HIPPI_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 /*
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index f9032c8..176c518 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_IF_LINK_H
 #define _LINUX_IF_LINK_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 
 /* The struct should be in sync with struct net_device_stats */
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
index c3b1f85..fcef103 100644
--- a/include/linux/if_ppp.h
+++ b/include/linux/if_ppp.h
@@ -33,6 +33,7 @@
 #ifndef _IF_PPP_H_
 #define _IF_PPP_H_
 
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 /*
diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h
index fb5c5c9..6526a62 100644
--- a/include/linux/if_strip.h
+++ b/include/linux/if_strip.h
@@ -18,6 +18,8 @@
 #ifndef __LINUX_STRIP_H
 #define __LINUX_STRIP_H
 
+#include <linux/types.h>
+
 typedef struct {
     __u8 c[6];
 } MetricomAddress;
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
index 5bcec8b..fc23aeb 100644
--- a/include/linux/if_tr.h
+++ b/include/linux/if_tr.h
@@ -19,6 +19,7 @@
 #ifndef _LINUX_IF_TR_H
 #define _LINUX_IF_TR_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>	/* For __be16 */
 
 /* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index f734a0b..92fbd8c 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -16,6 +16,7 @@
 #ifndef _LINUX_IGMP_H
 #define _LINUX_IGMP_H
 
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 /*
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index 6e8bc54..bc8c490 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,6 +1,8 @@
 #ifndef _INET_DIAG_H_
 #define _INET_DIAG_H_ 1
 
+#include <linux/types.h>
+
 /* Just some random number */
 #define TCPDIAG_GETSOCK 18
 #define DCCPDIAG_GETSOCK 19
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
index 1e7cc4a..acb9ad6 100644
--- a/include/linux/ip6_tunnel.h
+++ b/include/linux/ip6_tunnel.h
@@ -1,6 +1,8 @@
 #ifndef _IP6_TUNNEL_H
 #define _IP6_TUNNEL_H
 
+#include <linux/types.h>
+
 #define IPV6_TLV_TNL_ENCAP_LIMIT 4
 #define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
 
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b816cae..476d946 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,6 +1,7 @@
 #ifndef _IPV6_H
 #define _IPV6_H
 
+#include <linux/types.h>
 #include <linux/in6.h>
 #include <asm/byteorder.h>
 
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index b323ff5..1e7d8af 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -13,6 +13,8 @@
 #ifndef _LINUX_IPV6_ROUTE_H
 #define _LINUX_IPV6_ROUTE_H
 
+#include <linux/types.h>
+
 #define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
 #define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
 					   fallback, no routers on link */
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
index eb19b4e..aabb1d2 100644
--- a/include/linux/ipx.h
+++ b/include/linux/ipx.h
@@ -1,5 +1,6 @@
 #ifndef _IPX_H_
 #define _IPX_H_
+#include <linux/types.h>
 #include <linux/sockios.h>
 #include <linux/socket.h>
 #define IPX_NODE_LEN	6
diff --git a/include/linux/irda.h b/include/linux/irda.h
index 28f88ec..00bdad0 100644
--- a/include/linux/irda.h
+++ b/include/linux/irda.h
@@ -25,6 +25,8 @@
 #ifndef KERNEL_IRDA_H
 #define KERNEL_IRDA_H
 
+#include <linux/types.h>
+
 /* Please do *not* add any #include in this file, this file is
  * included as-is in user space.
  * Please fix the calling file to properly included needed files before
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index b45109c..b28b37e 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -308,7 +308,8 @@ void buffer_assertion_failure(struct buffer_head *bh);
 		int val = (expr);					     \
 		if (!val) {						     \
 			printk(KERN_ERR					     \
-				"EXT3-fs unexpected failure: %s;\n",# expr); \
+			       "JBD2 unexpected failure: %s: %s;\n",	     \
+			       __func__, #expr);			     \
 			printk(KERN_ERR why "\n");			     \
 		}							     \
 		val;							     \
diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h
index 0e39745..13fe09e 100644
--- a/include/linux/minix_fs.h
+++ b/include/linux/minix_fs.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_MINIX_FS_H
 #define _LINUX_MINIX_FS_H
 
+#include <linux/types.h>
 #include <linux/magic.h>
 
 /*
diff --git a/include/linux/module.h b/include/linux/module.h
index 4f7ea12..f3b8329 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -219,11 +219,6 @@ void *__symbol_get_gpl(const char *symbol);
 
 #endif
 
-struct module_ref
-{
-	local_t count;
-} ____cacheline_aligned;
-
 enum module_state
 {
 	MODULE_STATE_LIVE,
@@ -344,8 +339,11 @@ struct module
 	/* Destruction function. */
 	void (*exit)(void);
 
-	/* Reference counts */
-	struct module_ref ref[NR_CPUS];
+#ifdef CONFIG_SMP
+	char *refptr;
+#else
+	local_t ref;
+#endif
 #endif
 };
 #ifndef MODULE_ARCH_INIT
@@ -395,13 +393,22 @@ void __symbol_put(const char *symbol);
 #define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
 void symbol_put_addr(void *addr);
 
+static inline local_t *__module_ref_addr(struct module *mod, int cpu)
+{
+#ifdef CONFIG_SMP
+	return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+#else
+	return &mod->ref;
+#endif
+}
+
 /* Sometimes we know we already have a refcount, and it's easier not
    to handle the error case (which only happens with rmmod --wait). */
 static inline void __module_get(struct module *module)
 {
 	if (module) {
 		BUG_ON(module_refcount(module) == 0);
-		local_inc(&module->ref[get_cpu()].count);
+		local_inc(__module_ref_addr(module, get_cpu()));
 		put_cpu();
 	}
 }
@@ -413,7 +420,7 @@ static inline int try_module_get(struct module *module)
 	if (module) {
 		unsigned int cpu = get_cpu();
 		if (likely(module_is_live(module)))
-			local_inc(&module->ref[cpu].count);
+			local_inc(__module_ref_addr(module, cpu));
 		else
 			ret = 0;
 		put_cpu();
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index e0a9b20..ce38f1c 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_MSDOS_FS_H
 #define _LINUX_MSDOS_FS_H
 
+#include <linux/types.h>
 #include <linux/magic.h>
 #include <asm/byteorder.h>
 
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
index bd3bbf6..8730d5d 100644
--- a/include/linux/neighbour.h
+++ b/include/linux/neighbour.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_NEIGHBOUR_H
 #define __LINUX_NEIGHBOUR_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 
 struct ndmsg
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index f3fd83e..8f53452 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -5,6 +5,7 @@
 #ifndef _XT_CONNTRACK_H
 #define _XT_CONNTRACK_H
 
+#include <linux/types.h>
 #include <linux/netfilter/nf_conntrack_tuple_common.h>
 
 #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index 15a9f3b..91a1c24 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -37,6 +37,8 @@
 #ifndef NFS_IDMAP_H
 #define NFS_IDMAP_H
 
+#include <linux/types.h>
+
 /* XXX from bits/utmp.h  */
 #define IDMAP_NAMESZ  128
 
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index 5431512..bcd0201 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -10,9 +10,8 @@
 #ifndef NFSD_EXPORT_H
 #define NFSD_EXPORT_H
 
-#include <asm/types.h>
-#ifdef __KERNEL__
 # include <linux/types.h>
+#ifdef __KERNEL__
 # include <linux/in.h>
 #endif
 
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index b2e0938..fa317f6 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -14,9 +14,8 @@
 #ifndef _LINUX_NFSD_FH_H
 #define _LINUX_NFSD_FH_H
 
-#include <asm/types.h>
-#ifdef __KERNEL__
 # include <linux/types.h>
+#ifdef __KERNEL__
 # include <linux/string.h>
 # include <linux/fs.h>
 #endif
diff --git a/include/linux/nfsd/syscall.h b/include/linux/nfsd/syscall.h
index 4e43976..7a3b565 100644
--- a/include/linux/nfsd/syscall.h
+++ b/include/linux/nfsd/syscall.h
@@ -9,9 +9,8 @@
 #ifndef NFSD_SYSCALL_H
 #define NFSD_SYSCALL_H
 
-#include <asm/types.h>
-#ifdef __KERNEL__
 # include <linux/types.h>
+#ifdef __KERNEL__
 # include <linux/in.h>
 #endif 
 #include <linux/posix_types.h>
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index c435507..7382af3 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -12,6 +12,7 @@
 #ifndef LINUX_NUBUS_H
 #define LINUX_NUBUS_H
 
+#include <linux/types.h>
 #ifdef __KERNEL__
 #include <asm/nubus.h>
 #endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index febc10e..52a9fe0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2425,6 +2425,7 @@
 #define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
 #define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
 #define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
+#define PCI_DEVICE_ID_INTEL_TGP_LPC	0x27bc
 #define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
 #define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
 #define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index 4157faa..ee5e3c9 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -23,6 +23,8 @@
 #ifndef LINUX_PHONET_H
 #define LINUX_PHONET_H
 
+#include <linux/types.h>
+
 /* Automatic protocol selection */
 #define PN_PROTO_TRANSPORT	0
 /* Phonet datagram socket */
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
index e6aa848..3c842ed 100644
--- a/include/linux/pkt_cls.h
+++ b/include/linux/pkt_cls.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_PKT_CLS_H
 #define __LINUX_PKT_CLS_H
 
+#include <linux/types.h>
 #include <linux/pkt_sched.h>
 
 /* I think i could have done better macros ; for now this is stolen from
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index e3f133a..b2648e8 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_PKT_SCHED_H
 #define __LINUX_PKT_SCHED_H
 
+#include <linux/types.h>
+
 /* Logical priority bands not depending on specific packet scheduler.
    Every scheduler will map them to real traffic classes, if it has
    no more precise mechanism to classify packets.
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index 6e8adc7..1c866bd 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -25,6 +25,8 @@
  * OR MODIFICATIONS.
  */
 
+#include <linux/types.h>
+
 /*
  *  ==FILEVERSION 20000114==
  *
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index 9491026..6ba830f 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -15,6 +15,8 @@
 #ifndef _MD_P_H
 #define _MD_P_H
 
+#include <linux/types.h>
+
 /*
  * RAID superblock.
  *
diff --git a/include/linux/random.h b/include/linux/random.h
index 407ea36..25d02fe 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -7,6 +7,7 @@
 #ifndef _LINUX_RANDOM_H
 #define _LINUX_RANDOM_H
 
+#include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/irqnr.h>
 
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index e88f7058..1e5f673 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_RTNETLINK_H
 #define __LINUX_RTNETLINK_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 #include <linux/if_link.h>
 #include <linux/if_addr.h>
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index bef0c46..b363b91 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -8,6 +8,7 @@
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
+#include <linux/types.h>
 /* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
 
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 39c3a5e..6ca6a7b 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -43,10 +43,7 @@ static inline void *kmalloc(size_t size, gfp_t flags)
 			i++;
 #include <linux/kmalloc_sizes.h>
 #undef CACHE
-		{
-			extern void __you_cannot_kmalloc_that_much(void);
-			__you_cannot_kmalloc_that_much();
-		}
+		return NULL;
 found:
 #ifdef CONFIG_ZONE_DMA
 		if (flags & GFP_DMA)
@@ -77,10 +74,7 @@ static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
 			i++;
 #include <linux/kmalloc_sizes.h>
 #undef CACHE
-		{
-			extern void __you_cannot_kmalloc_that_much(void);
-			__you_cannot_kmalloc_that_much();
-		}
+		return NULL;
 found:
 #ifdef CONFIG_ZONE_DMA
 		if (flags & GFP_DMA)
diff --git a/include/linux/sound.h b/include/linux/sound.h
index 9e2a94f..44dcf05 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -25,6 +25,7 @@
 #define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
 #define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
 
+#ifdef __KERNEL__
 /*
  *	Sound core interface functions
  */
@@ -40,3 +41,4 @@ extern void unregister_sound_special(int unit);
 extern void unregister_sound_mixer(int unit);
 extern void unregister_sound_midi(int unit);
 extern void unregister_sound_dsp(int unit);
+#endif /* __KERNEL__ */
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index c93ef9d..95251cc 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -22,6 +22,7 @@
 #ifndef SPIDEV_H
 #define SPIDEV_H
 
+#include <linux/types.h>
 
 /* User space versions of kernel symbols for SPI clocking modes,
  * matching <linux/spi/spi.h>
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index c844a22..99b8bdb 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -13,6 +13,8 @@
 #define _SYNCLINK_H_
 #define SYNCLINK_H_VERSION 3.6
 
+#include <linux/types.h>
+
 #define BIT0	0x0001
 #define BIT1	0x0002
 #define BIT2	0x0004
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
index 18269e9..341dddb 100644
--- a/include/linux/taskstats.h
+++ b/include/linux/taskstats.h
@@ -16,6 +16,8 @@
 #ifndef _LINUX_TASKSTATS_H
 #define _LINUX_TASKSTATS_H
 
+#include <linux/types.h>
+
 /* Format for per-task data returned to userland when
  *	- a task exits
  *	- listener requests stats for a task
diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h
index 23a03eb6..e895c0a 100644
--- a/include/linux/tc_act/tc_gact.h
+++ b/include/linux/tc_act/tc_gact.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_GACT_H
 #define __LINUX_TC_GACT_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 #define TCA_ACT_GACT 5
diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h
index 71d6340..0a99ab6 100644
--- a/include/linux/tc_act/tc_mirred.h
+++ b/include/linux/tc_act/tc_mirred.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_MIR_H
 #define __LINUX_TC_MIR_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 #define TCA_ACT_MIRRED 8
diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h
index 83e56e3..54ce906 100644
--- a/include/linux/tc_act/tc_pedit.h
+++ b/include/linux/tc_act/tc_pedit.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_PED_H
 #define __LINUX_TC_PED_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 #define TCA_ACT_PEDIT 7
diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h
index c7f4d436..38e7f7b 100644
--- a/include/linux/tc_ematch/tc_em_cmp.h
+++ b/include/linux/tc_ematch/tc_em_cmp.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_EM_CMP_H
 #define __LINUX_TC_EM_CMP_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 struct tcf_em_cmp
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
index c50d2ba..dcfb733 100644
--- a/include/linux/tc_ematch/tc_em_meta.h
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_EM_META_H
 #define __LINUX_TC_EM_META_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 enum
diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h
index f19d1f5..9ed8c2e 100644
--- a/include/linux/tc_ematch/tc_em_nbyte.h
+++ b/include/linux/tc_ematch/tc_em_nbyte.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_EM_NBYTE_H
 #define __LINUX_TC_EM_NBYTE_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 struct tcf_em_nbyte
diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h
index 7cd43e9..d12a73a 100644
--- a/include/linux/tc_ematch/tc_em_text.h
+++ b/include/linux/tc_ematch/tc_em_text.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_TC_EM_TEXT_H
 #define __LINUX_TC_EM_TEXT_H
 
+#include <linux/types.h>
 #include <linux/pkt_cls.h>
 
 #define TC_EM_TEXT_ALGOSIZ	16
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 18a7293..3c86ed2 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -9,6 +9,8 @@
 #ifndef __LINUX_USB_CDC_H
 #define __LINUX_USB_CDC_H
 
+#include <linux/types.h>
+
 #define USB_CDC_SUBCLASS_ACM			0x02
 #define USB_CDC_SUBCLASS_ETHERNET		0x06
 #define USB_CDC_SUBCLASS_WHCM			0x08
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
index ea45f26..612102e 100644
--- a/include/linux/usb/gadgetfs.h
+++ b/include/linux/usb/gadgetfs.h
@@ -18,7 +18,7 @@
 #ifndef __LINUX_USB_GADGETFS_H
 #define __LINUX_USB_GADGETFS_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/ioctl.h>
 
 #include <linux/usb/ch9.h>
diff --git a/include/linux/video_decoder.h b/include/linux/video_decoder.h
index 121e26d..e26c0c8 100644
--- a/include/linux/video_decoder.h
+++ b/include/linux/video_decoder.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_VIDEO_DECODER_H
 #define _LINUX_VIDEO_DECODER_H
 
+#include <linux/types.h>
+
 #define HAVE_VIDEO_DECODER 1
 
 struct video_decoder_capability { /* this name is too long */
diff --git a/include/linux/video_encoder.h b/include/linux/video_encoder.h
index 4b0e690..b7b6423 100644
--- a/include/linux/video_encoder.h
+++ b/include/linux/video_encoder.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_VIDEO_ENCODER_H
 #define _LINUX_VIDEO_ENCODER_H
 
+#include <linux/types.h>
+
 struct video_encoder_capability { /* this name is too long */
 	__u32	flags;
 #define	VIDEO_ENCODER_PAL	1	/* can encode PAL signal */
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
index 15a653d..837f392 100644
--- a/include/linux/videodev.h
+++ b/include/linux/videodev.h
@@ -12,6 +12,7 @@
 #ifndef __LINUX_VIDEODEV_H
 #define __LINUX_VIDEODEV_H
 
+#include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/videodev2.h>
 
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index c1aef85..94c56d2 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -2,6 +2,7 @@
 #define _LINUX_VIRTIO_BLK_H
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
+#include <linux/types.h>
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_block */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index 7615ffc..dc16111 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,5 +1,6 @@
 #ifndef _LINUX_VIRTIO_CONSOLE_H
 #define _LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
 #include <linux/virtio_config.h>
 /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
  * anyone can use the definitions to implement compatible drivers/servers. */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 5cdd0aa..3efa86c 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -2,6 +2,7 @@
 #define _LINUX_VIRTIO_NET_H
 /* This header is BSD licensed so anyone can use the definitions to implement
  * compatible drivers/servers. */
+#include <linux/types.h>
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_net */
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index 9bf4ccc..55e41af 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -94,16 +94,16 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd);
 /* Call the specified callback for all subdevs matching grp_id (if 0, then
    match them all). Ignore any errors. Note that you cannot add or delete
    a subdev while walking the subdevs list. */
-#define v4l2_device_call_all(dev, grp_id, o, f, args...) 		\
+#define v4l2_device_call_all(dev, grpid, o, f, args...) 		\
 	__v4l2_device_call_subdevs(dev, 				\
-			!(grp_id) || sd->grp_id == (grp_id), o, f , ##args)
+			!(grpid) || sd->grp_id == (grpid), o, f , ##args)
 
 /* Call the specified callback for all subdevs matching grp_id (if 0, then
    match them all). If the callback returns an error other than 0 or
    -ENOIOCTLCMD, then return with that error code. Note that you cannot
    add or delete a subdev while walking the subdevs list. */
-#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) 		\
+#define v4l2_device_call_until_err(dev, grpid, o, f, args...) 		\
 	__v4l2_device_call_subdevs_until_err(dev,			\
-		       !(grp_id) || sd->grp_id == (grp_id), o, f , ##args)
+		       !(grpid) || sd->grp_id == (grpid), o, f , ##args)
 
 #endif
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
index e17eda3..d409d48 100644
--- a/include/mtd/inftl-user.h
+++ b/include/mtd/inftl-user.h
@@ -6,6 +6,8 @@
 #ifndef __MTD_INFTL_USER_H__
 #define __MTD_INFTL_USER_H__
 
+#include <linux/types.h>
+
 #define	OSAK_VERSION	0x5120
 #define	PERCENTUSED	98
 
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index f44bb5c..d0a0431 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -182,7 +182,7 @@ static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
 		size = 2048;
 	if (nr_pcpus >= 32)
 		size = 4096;
-	if (sizeof(rwlock_t) != 0) {
+	if (sizeof(spinlock_t) != 0) {
 #ifdef CONFIG_NUMA
 		if (size * sizeof(spinlock_t) > PAGE_SIZE)
 			hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t));
diff --git a/include/sound/hdsp.h b/include/sound/hdsp.h
index dec6b1d..d98a78d 100644
--- a/include/sound/hdsp.h
+++ b/include/sound/hdsp.h
@@ -19,6 +19,8 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/types.h>
+
 #define HDSP_MATRIX_MIXER_SIZE 2048
 
 enum HDSP_IO_Type {
diff --git a/include/video/sisfb.h b/include/video/sisfb.h
index e402eb5..fdd74f1 100644
--- a/include/video/sisfb.h
+++ b/include/video/sisfb.h
@@ -21,8 +21,8 @@
 #ifndef _LINUX_SISFB_H_
 #define _LINUX_SISFB_H_
 
+#include <linux/types.h>
 #include <asm/ioctl.h>
-#include <asm/types.h>
 
 /**********************************************/
 /*                   PUBLIC                   */
diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h
index 95bcef1..0993a22 100644
--- a/include/video/uvesafb.h
+++ b/include/video/uvesafb.h
@@ -1,6 +1,8 @@
 #ifndef _UVESAFB_H
 #define _UVESAFB_H
 
+#include <linux/types.h>
+
 struct v86_regs {
 	__u32 ebx;
 	__u32 ecx;
diff --git a/ipc/shm.c b/ipc/shm.c
index a9e09ad..c0a021f 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -368,14 +368,14 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
 		file = hugetlb_file_setup(name, size);
 		shp->mlock_user = current_user();
 	} else {
-		int acctflag = VM_ACCOUNT;
+		int acctflag = 0;
 		/*
 		 * Do not allow no accounting for OVERCOMMIT_NEVER, even
 	 	 * if it's asked for.
 		 */
 		if  ((shmflg & SHM_NORESERVE) &&
 				sysctl_overcommit_memory != OVERCOMMIT_NEVER)
-			acctflag = 0;
+			acctflag = VM_NORESERVE;
 		file = shmem_file_setup(name, size, acctflag);
 	}
 	error = PTR_ERR(file);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index a856788..f76db9d 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -61,6 +61,14 @@
 #include <linux/cgroup.h>
 
 /*
+ * Workqueue for cpuset related tasks.
+ *
+ * Using kevent workqueue may cause deadlock when memory_migrate
+ * is set. So we create a separate workqueue thread for cpuset.
+ */
+static struct workqueue_struct *cpuset_wq;
+
+/*
  * Tracks how many cpusets are currently defined in system.
  * When there is only one cpuset (the root cpuset) we can
  * short circuit some hooks.
@@ -831,7 +839,7 @@ static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
  */
 static void async_rebuild_sched_domains(void)
 {
-	schedule_work(&rebuild_sched_domains_work);
+	queue_work(cpuset_wq, &rebuild_sched_domains_work);
 }
 
 /*
@@ -2111,6 +2119,9 @@ void __init cpuset_init_smp(void)
 
 	hotcpu_notifier(cpuset_track_online_cpus, 0);
 	hotplug_memory_notifier(cpuset_track_online_nodes, 10);
+
+	cpuset_wq = create_singlethread_workqueue("cpuset");
+	BUG_ON(!cpuset_wq);
 }
 
 /**
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index f33afb0..f394d2a 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -501,6 +501,13 @@ static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
 			continue;
 		timer = rb_entry(base->first, struct hrtimer, node);
 		expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
+		/*
+		 * clock_was_set() has changed base->offset so the
+		 * result might be negative. Fix it up to prevent a
+		 * false positive in clockevents_program_event()
+		 */
+		if (expires.tv64 < 0)
+			expires.tv64 = 0;
 		if (expires.tv64 < cpu_base->expires_next.tv64)
 			cpu_base->expires_next = expires;
 	}
@@ -1158,6 +1165,29 @@ static void __run_hrtimer(struct hrtimer *timer)
 
 #ifdef CONFIG_HIGH_RES_TIMERS
 
+static int force_clock_reprogram;
+
+/*
+ * After 5 iteration's attempts, we consider that hrtimer_interrupt()
+ * is hanging, which could happen with something that slows the interrupt
+ * such as the tracing. Then we force the clock reprogramming for each future
+ * hrtimer interrupts to avoid infinite loops and use the min_delta_ns
+ * threshold that we will overwrite.
+ * The next tick event will be scheduled to 3 times we currently spend on
+ * hrtimer_interrupt(). This gives a good compromise, the cpus will spend
+ * 1/4 of their time to process the hrtimer interrupts. This is enough to
+ * let it running without serious starvation.
+ */
+
+static inline void
+hrtimer_interrupt_hanging(struct clock_event_device *dev,
+			ktime_t try_time)
+{
+	force_clock_reprogram = 1;
+	dev->min_delta_ns = (unsigned long)try_time.tv64 * 3;
+	printk(KERN_WARNING "hrtimer: interrupt too slow, "
+		"forcing clock min delta to %lu ns\n", dev->min_delta_ns);
+}
 /*
  * High resolution timer interrupt
  * Called with interrupts disabled
@@ -1167,6 +1197,7 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
 	struct hrtimer_clock_base *base;
 	ktime_t expires_next, now;
+	int nr_retries = 0;
 	int i;
 
 	BUG_ON(!cpu_base->hres_active);
@@ -1174,6 +1205,10 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 	dev->next_event.tv64 = KTIME_MAX;
 
  retry:
+	/* 5 retries is enough to notice a hang */
+	if (!(++nr_retries % 5))
+		hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now));
+
 	now = ktime_get();
 
 	expires_next.tv64 = KTIME_MAX;
@@ -1226,7 +1261,7 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
 	/* Reprogramming necessary ? */
 	if (expires_next.tv64 != KTIME_MAX) {
-		if (tick_program_event(expires_next, 0))
+		if (tick_program_event(expires_next, force_clock_reprogram))
 			goto retry;
 	}
 }
@@ -1580,6 +1615,10 @@ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self,
 		break;
 
 #ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
+		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 	{
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index f63c706..7de11bd 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -383,6 +383,7 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc)
 out_unlock:
 	spin_unlock(&desc->lock);
 }
+EXPORT_SYMBOL_GPL(handle_level_irq);
 
 /**
  *	handle_fasteoi_irq - irq handler for transparent controllers
@@ -593,6 +594,7 @@ __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
 	}
 	spin_unlock_irqrestore(&desc->lock, flags);
 }
+EXPORT_SYMBOL_GPL(__set_irq_handler);
 
 void
 set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
diff --git a/kernel/module.c b/kernel/module.c
index e8b51d4..ba22484 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -573,13 +573,13 @@ static char last_unloaded_module[MODULE_NAME_LEN+1];
 /* Init the unload section of the module. */
 static void module_unload_init(struct module *mod)
 {
-	unsigned int i;
+	int cpu;
 
 	INIT_LIST_HEAD(&mod->modules_which_use_me);
-	for (i = 0; i < NR_CPUS; i++)
-		local_set(&mod->ref[i].count, 0);
+	for_each_possible_cpu(cpu)
+		local_set(__module_ref_addr(mod, cpu), 0);
 	/* Hold reference count during initialization. */
-	local_set(&mod->ref[raw_smp_processor_id()].count, 1);
+	local_set(__module_ref_addr(mod, raw_smp_processor_id()), 1);
 	/* Backwards compatibility macros put refcount during init. */
 	mod->waiter = current;
 }
@@ -717,10 +717,11 @@ static int try_stop_module(struct module *mod, int flags, int *forced)
 
 unsigned int module_refcount(struct module *mod)
 {
-	unsigned int i, total = 0;
+	unsigned int total = 0;
+	int cpu;
 
-	for (i = 0; i < NR_CPUS; i++)
-		total += local_read(&mod->ref[i].count);
+	for_each_possible_cpu(cpu)
+		total += local_read(__module_ref_addr(mod, cpu));
 	return total;
 }
 EXPORT_SYMBOL(module_refcount);
@@ -894,7 +895,7 @@ void module_put(struct module *module)
 {
 	if (module) {
 		unsigned int cpu = get_cpu();
-		local_dec(&module->ref[cpu].count);
+		local_dec(__module_ref_addr(module, cpu));
 		/* Maybe they're waiting for us to drop reference? */
 		if (unlikely(!module_is_live(module)))
 			wake_up_process(module->waiter);
@@ -1464,7 +1465,10 @@ static void free_module(struct module *mod)
 	kfree(mod->args);
 	if (mod->percpu)
 		percpu_modfree(mod->percpu);
-
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+	if (mod->refptr)
+		percpu_modfree(mod->refptr);
+#endif
 	/* Free lock-classes: */
 	lockdep_free_key_range(mod->module_core, mod->core_size);
 
@@ -2011,6 +2015,14 @@ static noinline struct module *load_module(void __user *umod,
 	if (err < 0)
 		goto free_mod;
 
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+	mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
+				      mod->name);
+	if (!mod->refptr) {
+		err = -ENOMEM;
+		goto free_mod;
+	}
+#endif
 	if (pcpuindex) {
 		/* We have a special allocation for this section. */
 		percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
@@ -2018,7 +2030,7 @@ static noinline struct module *load_module(void __user *umod,
 					 mod->name);
 		if (!percpu) {
 			err = -ENOMEM;
-			goto free_mod;
+			goto free_percpu;
 		}
 		sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
 		mod->percpu = percpu;
@@ -2282,6 +2294,9 @@ static noinline struct module *load_module(void __user *umod,
  free_percpu:
 	if (percpu)
 		percpu_modfree(percpu);
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+	percpu_modfree(mod->refptr);
+#endif
  free_mod:
 	kfree(args);
  free_hdr:
diff --git a/kernel/sched.c b/kernel/sched.c
index 52bbf1c..242d0d4 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2266,6 +2266,16 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
 	if (!sched_feat(SYNC_WAKEUPS))
 		sync = 0;
 
+	if (!sync) {
+		if (current->se.avg_overlap < sysctl_sched_migration_cost &&
+			  p->se.avg_overlap < sysctl_sched_migration_cost)
+			sync = 1;
+	} else {
+		if (current->se.avg_overlap >= sysctl_sched_migration_cost ||
+			  p->se.avg_overlap >= sysctl_sched_migration_cost)
+			sync = 0;
+	}
+
 #ifdef CONFIG_SMP
 	if (sched_feat(LB_WAKEUP_UPDATE)) {
 		struct sched_domain *sd;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 5cc1c16..a7e50ba 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -719,7 +719,7 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup)
 		__enqueue_entity(cfs_rq, se);
 }
 
-static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
+static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 	if (cfs_rq->last == se)
 		cfs_rq->last = NULL;
@@ -728,6 +728,12 @@ static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
 		cfs_rq->next = NULL;
 }
 
+static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
+{
+	for_each_sched_entity(se)
+		__clear_buddies(cfs_rq_of(se), se);
+}
+
 static void
 dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep)
 {
@@ -768,8 +774,14 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr)
 
 	ideal_runtime = sched_slice(cfs_rq, curr);
 	delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime;
-	if (delta_exec > ideal_runtime)
+	if (delta_exec > ideal_runtime) {
 		resched_task(rq_of(cfs_rq)->curr);
+		/*
+		 * The current task ran long enough, ensure it doesn't get
+		 * re-elected due to buddy favours.
+		 */
+		clear_buddies(cfs_rq, curr);
+	}
 }
 
 static void
@@ -1179,20 +1191,15 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq,
 	    int idx, unsigned long load, unsigned long this_load,
 	    unsigned int imbalance)
 {
-	struct task_struct *curr = this_rq->curr;
-	struct task_group *tg;
 	unsigned long tl = this_load;
 	unsigned long tl_per_task;
+	struct task_group *tg;
 	unsigned long weight;
 	int balanced;
 
 	if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
 		return 0;
 
-	if (sync && (curr->se.avg_overlap > sysctl_sched_migration_cost ||
-			p->se.avg_overlap > sysctl_sched_migration_cost))
-		sync = 0;
-
 	/*
 	 * If sync wakeup then subtract the (maximum possible)
 	 * effect of the currently running task from the load
@@ -1419,9 +1426,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
 	if (!sched_feat(WAKEUP_PREEMPT))
 		return;
 
-	if (sched_feat(WAKEUP_OVERLAP) && (sync ||
-			(se->avg_overlap < sysctl_sched_migration_cost &&
-			 pse->avg_overlap < sysctl_sched_migration_cost))) {
+	if (sched_feat(WAKEUP_OVERLAP) && sync) {
 		resched_task(curr);
 		return;
 	}
@@ -1452,6 +1457,11 @@ static struct task_struct *pick_next_task_fair(struct rq *rq)
 
 	do {
 		se = pick_next_entity(cfs_rq);
+		/*
+		 * If se was a buddy, clear it so that it will have to earn
+		 * the favour again.
+		 */
+		__clear_buddies(cfs_rq, se);
 		set_next_entity(cfs_rq, se);
 		cfs_rq = group_cfs_rq(se);
 	} while (cfs_rq);
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 954e1a8..bac1061 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -968,8 +968,8 @@ static inline int pick_optimal_cpu(int this_cpu, cpumask_t *mask)
 	if ((this_cpu != -1) && cpu_isset(this_cpu, *mask))
 		return this_cpu;
 
-	first = first_cpu(*mask);
-	if (first != NR_CPUS)
+	first = cpumask_first(mask);
+	if (first < nr_cpu_ids)
 		return first;
 
 	return -1;
diff --git a/kernel/signal.c b/kernel/signal.c
index e737597..b6b3676 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -909,7 +909,9 @@ static void print_fatal_signal(struct pt_regs *regs, int signr)
 	}
 #endif
 	printk("\n");
+	preempt_disable();
 	show_regs(regs);
+	preempt_enable();
 }
 
 static int __init setup_print_fatal_signals(char *str)
diff --git a/kernel/smp.c b/kernel/smp.c
index 5cfa0e5..bbedbb7 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -18,6 +18,7 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_function_lock);
 enum {
 	CSD_FLAG_WAIT		= 0x01,
 	CSD_FLAG_ALLOC		= 0x02,
+	CSD_FLAG_LOCK		= 0x04,
 };
 
 struct call_function_data {
@@ -186,6 +187,9 @@ void generic_smp_call_function_single_interrupt(void)
 			if (data_flags & CSD_FLAG_WAIT) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_WAIT;
+			} else if (data_flags & CSD_FLAG_LOCK) {
+				smp_wmb();
+				data->flags &= ~CSD_FLAG_LOCK;
 			} else if (data_flags & CSD_FLAG_ALLOC)
 				kfree(data);
 		}
@@ -196,6 +200,8 @@ void generic_smp_call_function_single_interrupt(void)
 	}
 }
 
+static DEFINE_PER_CPU(struct call_single_data, csd_data);
+
 /*
  * smp_call_function_single - Run a function on a specific CPU
  * @func: The function to run. This must be fast and non-blocking.
@@ -224,14 +230,38 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		func(info);
 		local_irq_restore(flags);
 	} else if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) {
-		struct call_single_data *data = NULL;
+		struct call_single_data *data;
 
 		if (!wait) {
+			/*
+			 * We are calling a function on a single CPU
+			 * and we are not going to wait for it to finish.
+			 * We first try to allocate the data, but if we
+			 * fail, we fall back to use a per cpu data to pass
+			 * the information to that CPU. Since all callers
+			 * of this code will use the same data, we must
+			 * synchronize the callers to prevent a new caller
+			 * from corrupting the data before the callee
+			 * can access it.
+			 *
+			 * The CSD_FLAG_LOCK is used to let us know when
+			 * the IPI handler is done with the data.
+			 * The first caller will set it, and the callee
+			 * will clear it. The next caller must wait for
+			 * it to clear before we set it again. This
+			 * will make sure the callee is done with the
+			 * data before a new caller will use it.
+			 */
 			data = kmalloc(sizeof(*data), GFP_ATOMIC);
 			if (data)
 				data->flags = CSD_FLAG_ALLOC;
-		}
-		if (!data) {
+			else {
+				data = &per_cpu(csd_data, me);
+				while (data->flags & CSD_FLAG_LOCK)
+					cpu_relax();
+				data->flags = CSD_FLAG_LOCK;
+			}
+		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
 		}
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 63e05d4..21a5ca8 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -274,6 +274,21 @@ out_bc:
 }
 
 /*
+ * Transfer the do_timer job away from a dying cpu.
+ *
+ * Called with interrupts disabled.
+ */
+static void tick_handover_do_timer(int *cpup)
+{
+	if (*cpup == tick_do_timer_cpu) {
+		int cpu = cpumask_first(cpu_online_mask);
+
+		tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu :
+			TICK_DO_TIMER_NONE;
+	}
+}
+
+/*
  * Shutdown an event device on a given cpu:
  *
  * This is called on a life CPU, when a CPU is dead. So we cannot
@@ -297,13 +312,6 @@ static void tick_shutdown(unsigned int *cpup)
 		clockevents_exchange_device(dev, NULL);
 		td->evtdev = NULL;
 	}
-	/* Transfer the do_timer job away from this cpu */
-	if (*cpup == tick_do_timer_cpu) {
-		int cpu = cpumask_first(cpu_online_mask);
-
-		tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu :
-			TICK_DO_TIMER_NONE;
-	}
 	spin_unlock_irqrestore(&tick_device_lock, flags);
 }
 
@@ -357,6 +365,10 @@ static int tick_notify(struct notifier_block *nb, unsigned long reason,
 		tick_broadcast_oneshot_control(reason);
 		break;
 
+	case CLOCK_EVT_NOTIFY_CPU_DYING:
+		tick_handover_do_timer(dev);
+		break;
+
 	case CLOCK_EVT_NOTIFY_CPU_DEAD:
 		tick_shutdown_broadcast_oneshot(dev);
 		tick_shutdown_broadcast(dev);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 2f32969..7dcf6e9 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -17,6 +17,7 @@
 #include <linux/clocksource.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
+#include <linux/suspend.h>
 #include <linux/debugfs.h>
 #include <linux/hardirq.h>
 #include <linux/kthread.h>
@@ -1965,6 +1966,7 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 static atomic_t ftrace_graph_active;
+static struct notifier_block ftrace_suspend_notifier;
 
 int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
 {
@@ -2043,6 +2045,27 @@ static int start_graph_tracing(void)
 	return ret;
 }
 
+/*
+ * Hibernation protection.
+ * The state of the current task is too much unstable during
+ * suspend/restore to disk. We want to protect against that.
+ */
+static int
+ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state,
+							void *unused)
+{
+	switch (state) {
+	case PM_HIBERNATION_PREPARE:
+		pause_graph_tracing();
+		break;
+
+	case PM_POST_HIBERNATION:
+		unpause_graph_tracing();
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
 int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 			trace_func_graph_ent_t entryfunc)
 {
@@ -2050,6 +2073,9 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 
 	mutex_lock(&ftrace_sysctl_lock);
 
+	ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call;
+	register_pm_notifier(&ftrace_suspend_notifier);
+
 	atomic_inc(&ftrace_graph_active);
 	ret = start_graph_tracing();
 	if (ret) {
@@ -2075,6 +2101,7 @@ void unregister_ftrace_graph(void)
 	ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
 	ftrace_graph_entry = ftrace_graph_entry_stub;
 	ftrace_shutdown(FTRACE_STOP_FUNC_RET);
+	unregister_pm_notifier(&ftrace_suspend_notifier);
 
 	mutex_unlock(&ftrace_sysctl_lock);
 }
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 8b0daf0..bd38c5c 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -246,7 +246,7 @@ static inline int test_time_stamp(u64 delta)
 	return 0;
 }
 
-#define BUF_PAGE_SIZE (PAGE_SIZE - sizeof(struct buffer_data_page))
+#define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data))
 
 /*
  * head_page == tail_page && head == tail then buffer is empty.
@@ -1025,12 +1025,8 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 		}
 
 		if (next_page == head_page) {
-			if (!(buffer->flags & RB_FL_OVERWRITE)) {
-				/* reset write */
-				if (tail <= BUF_PAGE_SIZE)
-					local_set(&tail_page->write, tail);
+			if (!(buffer->flags & RB_FL_OVERWRITE))
 				goto out_unlock;
-			}
 
 			/* tail_page has not moved yet? */
 			if (tail_page == cpu_buffer->tail_page) {
@@ -1105,6 +1101,10 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 	return event;
 
  out_unlock:
+	/* reset write */
+	if (tail <= BUF_PAGE_SIZE)
+		local_set(&tail_page->write, tail);
+
 	__raw_spin_unlock(&cpu_buffer->lock);
 	local_irq_restore(flags);
 	return NULL;
@@ -2174,6 +2174,9 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
 
 	cpu_buffer->overrun = 0;
 	cpu_buffer->entries = 0;
+
+	cpu_buffer->write_stamp = 0;
+	cpu_buffer->read_stamp = 0;
 }
 
 /**
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index c580233..17bb88d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -40,7 +40,7 @@
 
 #define TRACE_BUFFER_FLAGS	(RB_FL_OVERWRITE)
 
-unsigned long __read_mostly	tracing_max_latency = (cycle_t)ULONG_MAX;
+unsigned long __read_mostly	tracing_max_latency;
 unsigned long __read_mostly	tracing_thresh;
 
 /*
@@ -3736,7 +3736,7 @@ static struct notifier_block trace_die_notifier = {
  * it if we decide to change what log level the ftrace dump
  * should be at.
  */
-#define KERN_TRACE		KERN_INFO
+#define KERN_TRACE		KERN_EMERG
 
 static void
 trace_printk_seq(struct trace_seq *s)
@@ -3770,6 +3770,7 @@ void ftrace_dump(void)
 	dump_ran = 1;
 
 	/* No turning back! */
+	tracing_off();
 	ftrace_kill();
 
 	for_each_tracing_cpu(cpu) {
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 7c2e326..62a78d9 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -380,6 +380,7 @@ static void stop_irqsoff_tracer(struct trace_array *tr)
 
 static void __irqsoff_tracer_init(struct trace_array *tr)
 {
+	tracing_max_latency = 0;
 	irqsoff_trace = tr;
 	/* make sure that the tracer is visible */
 	smp_wmb();
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 43586b6..42ae1e7 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -333,6 +333,7 @@ static void stop_wakeup_tracer(struct trace_array *tr)
 
 static int wakeup_tracer_init(struct trace_array *tr)
 {
+	tracing_max_latency = 0;
 	wakeup_trace = tr;
 	start_wakeup_tracer(tr);
 	return 0;
diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index 0f8fc22..4689cb0 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -22,7 +22,7 @@ notrace unsigned int debug_smp_processor_id(void)
 	 * Kernel threads bound to a single CPU can safely use
 	 * smp_processor_id():
 	 */
-	if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu)))
+	if (cpumask_equal(&current->cpus_allowed, cpumask_of(this_cpu)))
 		goto out;
 
 	/*
diff --git a/mm/mlock.c b/mm/mlock.c
index 2904a34..028ec48 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -294,14 +294,10 @@ static inline int __mlock_posix_error_return(long retval)
  *
  * return number of pages [> 0] to be removed from locked_vm on success
  * of "special" vmas.
- *
- * return negative error if vma spanning @start-@range disappears while
- * mmap semaphore is dropped.  Unlikely?
  */
 long mlock_vma_pages_range(struct vm_area_struct *vma,
 			unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = vma->vm_mm;
 	int nr_pages = (end - start) / PAGE_SIZE;
 	BUG_ON(!(vma->vm_flags & VM_LOCKED));
 
@@ -314,20 +310,8 @@ long mlock_vma_pages_range(struct vm_area_struct *vma,
 	if (!((vma->vm_flags & (VM_DONTEXPAND | VM_RESERVED)) ||
 			is_vm_hugetlb_page(vma) ||
 			vma == get_gate_vma(current))) {
-		long error;
-		downgrade_write(&mm->mmap_sem);
-
-		error = __mlock_vma_pages_range(vma, start, end, 1);
 
-		up_read(&mm->mmap_sem);
-		/* vma can change or disappear */
-		down_write(&mm->mmap_sem);
-		vma = find_vma(mm, start);
-		/* non-NULL vma must contain @start, but need to check @end */
-		if (!vma ||  end > vma->vm_end)
-			return -ENOMEM;
-
-		return 0;	/* hide other errors from mmap(), et al */
+		return __mlock_vma_pages_range(vma, start, end, 1);
 	}
 
 	/*
@@ -438,41 +422,14 @@ success:
 	vma->vm_flags = newflags;
 
 	if (lock) {
-		/*
-		 * mmap_sem is currently held for write.  Downgrade the write
-		 * lock to a read lock so that other faults, mmap scans, ...
-		 * while we fault in all pages.
-		 */
-		downgrade_write(&mm->mmap_sem);
-
 		ret = __mlock_vma_pages_range(vma, start, end, 1);
 
-		/*
-		 * Need to reacquire mmap sem in write mode, as our callers
-		 * expect this.  We have no support for atomically upgrading
-		 * a sem to write, so we need to check for ranges while sem
-		 * is unlocked.
-		 */
-		up_read(&mm->mmap_sem);
-		/* vma can change or disappear */
-		down_write(&mm->mmap_sem);
-		*prev = find_vma(mm, start);
-		/* non-NULL *prev must contain @start, but need to check @end */
-		if (!(*prev) || end > (*prev)->vm_end)
-			ret = -ENOMEM;
-		else if (ret > 0) {
+		if (ret > 0) {
 			mm->locked_vm -= ret;
 			ret = 0;
 		} else
 			ret = __mlock_posix_error_return(ret); /* translate if needed */
 	} else {
-		/*
-		 * TODO:  for unlocking, pages will already be resident, so
-		 * we don't need to wait for allocations/reclaim/pagein, ...
-		 * However, unlocking a very large region can still take a
-		 * while.  Should we downgrade the semaphore for both lock
-		 * AND unlock ?
-		 */
 		__mlock_vma_pages_range(vma, start, end, 0);
 	}
 
diff --git a/mm/mmap.c b/mm/mmap.c
index d3fa10a..214b6a2 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -658,6 +658,9 @@ again:			remove_next = 1 + (end > next->vm_end);
 	validate_mm(mm);
 }
 
+/* Flags that can be inherited from an existing mapping when merging */
+#define VM_MERGEABLE_FLAGS (VM_CAN_NONLINEAR)
+
 /*
  * If the vma has a ->close operation then the driver probably needs to release
  * per-vma resources, so we don't attempt to merge those.
@@ -665,7 +668,7 @@ again:			remove_next = 1 + (end > next->vm_end);
 static inline int is_mergeable_vma(struct vm_area_struct *vma,
 			struct file *file, unsigned long vm_flags)
 {
-	if (vma->vm_flags != vm_flags)
+	if ((vma->vm_flags ^ vm_flags) & ~VM_MERGEABLE_FLAGS)
 		return 0;
 	if (vma->vm_file != file)
 		return 0;
@@ -1087,6 +1090,15 @@ int vma_wants_writenotify(struct vm_area_struct *vma)
 		mapping_cap_account_dirty(vma->vm_file->f_mapping);
 }
 
+/*
+ * We account for memory if it's a private writeable mapping,
+ * and VM_NORESERVE wasn't set.
+ */
+static inline int accountable_mapping(unsigned int vm_flags)
+{
+	return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE;
+}
+
 unsigned long mmap_region(struct file *file, unsigned long addr,
 			  unsigned long len, unsigned long flags,
 			  unsigned int vm_flags, unsigned long pgoff,
@@ -1114,23 +1126,24 @@ munmap_back:
 	if (!may_expand_vm(mm, len >> PAGE_SHIFT))
 		return -ENOMEM;
 
-	if (flags & MAP_NORESERVE)
+	/*
+	 * Set 'VM_NORESERVE' if we should not account for the
+	 * memory use of this mapping. We only honor MAP_NORESERVE
+	 * if we're allowed to overcommit memory.
+	 */
+	if ((flags & MAP_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER)
+		vm_flags |= VM_NORESERVE;
+	if (!accountable)
 		vm_flags |= VM_NORESERVE;
 
-	if (accountable && (!(flags & MAP_NORESERVE) ||
-			    sysctl_overcommit_memory == OVERCOMMIT_NEVER)) {
-		if (vm_flags & VM_SHARED) {
-			/* Check memory availability in shmem_file_setup? */
-			vm_flags |= VM_ACCOUNT;
-		} else if (vm_flags & VM_WRITE) {
-			/*
-			 * Private writable mapping: check memory availability
-			 */
-			charged = len >> PAGE_SHIFT;
-			if (security_vm_enough_memory(charged))
-				return -ENOMEM;
-			vm_flags |= VM_ACCOUNT;
-		}
+	/*
+	 * Private writable mapping: check memory availability
+	 */
+	if (accountable_mapping(vm_flags)) {
+		charged = len >> PAGE_SHIFT;
+		if (security_vm_enough_memory(charged))
+			return -ENOMEM;
+		vm_flags |= VM_ACCOUNT;
 	}
 
 	/*
@@ -1181,14 +1194,6 @@ munmap_back:
 			goto free_vma;
 	}
 
-	/* We set VM_ACCOUNT in a shared mapping's vm_flags, to inform
-	 * shmem_zero_setup (perhaps called through /dev/zero's ->mmap)
-	 * that memory reservation must be checked; but that reservation
-	 * belongs to shared memory object, not to vma: so now clear it.
-	 */
-	if ((vm_flags & (VM_SHARED|VM_ACCOUNT)) == (VM_SHARED|VM_ACCOUNT))
-		vma->vm_flags &= ~VM_ACCOUNT;
-
 	/* Can addr have changed??
 	 *
 	 * Answer: Yes, several device drivers can do it in their
diff --git a/mm/shmem.c b/mm/shmem.c
index 5d0de96..19d566c 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2628,7 +2628,7 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
 		goto close_file;
 
 #ifdef CONFIG_SHMEM
-	SHMEM_I(inode)->flags = flags & VM_ACCOUNT;
+	SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT;
 #endif
 	d_instantiate(dentry, inode);
 	inode->i_size = size;
diff --git a/mm/slub.c b/mm/slub.c
index 6392ae5..bdc9abb 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1996,7 +1996,7 @@ static struct kmem_cache_cpu *alloc_kmem_cache_cpu(struct kmem_cache *s,
 static void free_kmem_cache_cpu(struct kmem_cache_cpu *c, int cpu)
 {
 	if (c < per_cpu(kmem_cache_cpu, cpu) ||
-			c > per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) {
+			c >= per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) {
 		kfree(c);
 		return;
 	}
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 2e5f2ca..da74b84 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2212,10 +2212,10 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
 		return 0;
 
 next_skb:
-	block_limit = skb_headlen(st->cur_skb);
+	block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
 
 	if (abs_offset < block_limit) {
-		*data = st->cur_skb->data + abs_offset;
+		*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
 		return block_limit - abs_offset;
 	}
 
@@ -2250,13 +2250,14 @@ next_skb:
 		st->frag_data = NULL;
 	}
 
-	if (st->cur_skb->next) {
-		st->cur_skb = st->cur_skb->next;
+	if (st->root_skb == st->cur_skb &&
+	    skb_shinfo(st->root_skb)->frag_list) {
+		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
 		st->frag_idx = 0;
 		goto next_skb;
-	} else if (st->root_skb == st->cur_skb &&
-		   skb_shinfo(st->root_skb)->frag_list) {
-		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+	} else if (st->cur_skb->next) {
+		st->cur_skb = st->cur_skb->next;
+		st->frag_idx = 0;
 		goto next_skb;
 	}
 
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 42a0f3d..d722013 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1268,6 +1268,9 @@ __be32 __init root_nfs_parse_addr(char *name)
 static int __init ip_auto_config(void)
 {
 	__be32 addr;
+#ifdef IPCONFIG_DYNAMIC
+	int retries = CONF_OPEN_RETRIES;
+#endif
 
 #ifdef CONFIG_PROC_FS
 	proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
@@ -1304,9 +1307,6 @@ static int __init ip_auto_config(void)
 #endif
 	    ic_first_dev->next) {
 #ifdef IPCONFIG_DYNAMIC
-
-		int retries = CONF_OPEN_RETRIES;
-
 		if (ic_dynamic() < 0) {
 			ic_close_devs();
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 0cd71b8..76b148b 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -524,7 +524,8 @@ static int tcp_splice_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb,
 	struct tcp_splice_state *tss = rd_desc->arg.data;
 	int ret;
 
-	ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+	ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len),
+			      tss->flags);
 	if (ret > 0)
 		rd_desc->count -= ret;
 	return ret;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index cf5ab05..b7faffe 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -120,8 +120,11 @@ EXPORT_SYMBOL(sysctl_udp_wmem_min);
 atomic_t udp_memory_allocated;
 EXPORT_SYMBOL(udp_memory_allocated);
 
+#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+
 static int udp_lib_lport_inuse(struct net *net, __u16 num,
 			       const struct udp_hslot *hslot,
+			       unsigned long *bitmap,
 			       struct sock *sk,
 			       int (*saddr_comp)(const struct sock *sk1,
 						 const struct sock *sk2))
@@ -132,12 +135,17 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num,
 	sk_nulls_for_each(sk2, node, &hslot->head)
 		if (net_eq(sock_net(sk2), net)			&&
 		    sk2 != sk					&&
-		    sk2->sk_hash == num				&&
+		    (bitmap || sk2->sk_hash == num)		&&
 		    (!sk2->sk_reuse || !sk->sk_reuse)		&&
 		    (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
 			|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
-		    (*saddr_comp)(sk, sk2))
-			return 1;
+		    (*saddr_comp)(sk, sk2)) {
+			if (bitmap)
+				__set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
+					  bitmap);
+			else
+				return 1;
+		}
 	return 0;
 }
 
@@ -160,32 +168,47 @@ int udp_lib_get_port(struct sock *sk, unsigned short snum,
 	if (!snum) {
 		int low, high, remaining;
 		unsigned rand;
-		unsigned short first;
+		unsigned short first, last;
+		DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN);
 
 		inet_get_local_port_range(&low, &high);
 		remaining = (high - low) + 1;
 
 		rand = net_random();
-		snum = first = rand % remaining + low;
-		rand |= 1;
-		for (;;) {
-			hslot = &udptable->hash[udp_hashfn(net, snum)];
+		first = (((u64)rand * remaining) >> 32) + low;
+		/*
+		 * force rand to be an odd multiple of UDP_HTABLE_SIZE
+		 */
+		rand = (rand | 1) * UDP_HTABLE_SIZE;
+		for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
+			hslot = &udptable->hash[udp_hashfn(net, first)];
+			bitmap_zero(bitmap, PORTS_PER_CHAIN);
 			spin_lock_bh(&hslot->lock);
-			if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
-				break;
-			spin_unlock_bh(&hslot->lock);
+			udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
+					    saddr_comp);
+
+			snum = first;
+			/*
+			 * Iterate on all possible values of snum for this hash.
+			 * Using steps of an odd multiple of UDP_HTABLE_SIZE
+			 * give us randomization and full range coverage.
+			 */
 			do {
-				snum = snum + rand;
-			} while (snum < low || snum > high);
-			if (snum == first)
-				goto fail;
+				if (low <= snum && snum <= high &&
+				    !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+					goto found;
+				snum += rand;
+			} while (snum != first);
+			spin_unlock_bh(&hslot->lock);
 		}
+		goto fail;
 	} else {
 		hslot = &udptable->hash[udp_hashfn(net, snum)];
 		spin_lock_bh(&hslot->lock);
-		if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
+		if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
 			goto fail_unlock;
 	}
+found:
 	inet_sk(sk)->num = snum;
 	sk->sk_hash = snum;
 	if (sk_unhashed(sk)) {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e92ad84..f9afb45 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4250,7 +4250,7 @@ static struct addrconf_sysctl_table
 			.procname	=	"mc_forwarding",
 			.data		=	&ipv6_devconf.mc_forwarding,
 			.maxlen		=	sizeof(int),
-			.mode		=	0644,
+			.mode		=	0444,
 			.proc_handler	=	proc_dointvec,
 		},
 #endif
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 4f43384..36dff88 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -443,10 +443,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
 	if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
 		goto relookup_failed;
 
-	if (ip6_dst_lookup(sk, &dst2, &fl))
+	if (ip6_dst_lookup(sk, &dst2, &fl2))
 		goto relookup_failed;
 
-	err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP);
+	err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP);
 	switch (err) {
 	case 0:
 		dst_release(dst);
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 936f489..f171e8d 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -255,6 +255,7 @@ int ip6_mc_input(struct sk_buff *skb)
 	 *      IPv6 multicast router mode is now supported ;)
 	 */
 	if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
+	    !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
 	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
 		/*
 		 * Okay, we try to forward - split and duplicate
@@ -316,7 +317,6 @@ int ip6_mc_input(struct sk_buff *skb)
 		}
 
 		if (skb2) {
-			skb2->dev = skb2->dst->dev;
 			ip6_mr_input(skb2);
 		}
 	}
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 3c51b2d..228be55 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -48,6 +48,7 @@
 #include <linux/pim.h>
 #include <net/addrconf.h>
 #include <linux/netfilter_ipv6.h>
+#include <net/ip6_checksum.h>
 
 /* Big lock, protecting vif table, mrt cache and mroute socket state.
    Note that the changes are semaphored via rtnl_lock.
@@ -365,7 +366,9 @@ static int pim6_rcv(struct sk_buff *skb)
 	pim = (struct pimreghdr *)skb_transport_header(skb);
 	if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) ||
 	    (pim->flags & PIM_NULL_REGISTER) ||
-	    (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 &&
+	    (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
+			     sizeof(*pim), IPPROTO_PIM,
+			     csum_partial((void *)pim, sizeof(*pim), 0)) &&
 	     csum_fold(skb_checksum(skb, 0, skb->len, 0))))
 		goto drop;
 
@@ -392,7 +395,7 @@ static int pim6_rcv(struct sk_buff *skb)
 	skb_pull(skb, (u8 *)encap - skb->data);
 	skb_reset_network_header(skb);
 	skb->dev = reg_dev;
-	skb->protocol = htons(ETH_P_IP);
+	skb->protocol = htons(ETH_P_IPV6);
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
 	dst_release(skb->dst);
@@ -481,6 +484,7 @@ static int mif6_delete(struct net *net, int vifi)
 {
 	struct mif_device *v;
 	struct net_device *dev;
+	struct inet6_dev *in6_dev;
 	if (vifi < 0 || vifi >= net->ipv6.maxvif)
 		return -EADDRNOTAVAIL;
 
@@ -513,6 +517,10 @@ static int mif6_delete(struct net *net, int vifi)
 
 	dev_set_allmulti(dev, -1);
 
+	in6_dev = __in6_dev_get(dev);
+	if (in6_dev)
+		in6_dev->cnf.mc_forwarding--;
+
 	if (v->flags & MIFF_REGISTER)
 		unregister_netdevice(dev);
 
@@ -622,6 +630,7 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock)
 	int vifi = vifc->mif6c_mifi;
 	struct mif_device *v = &net->ipv6.vif6_table[vifi];
 	struct net_device *dev;
+	struct inet6_dev *in6_dev;
 	int err;
 
 	/* Is vif busy ? */
@@ -662,6 +671,10 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock)
 		return -EINVAL;
 	}
 
+	in6_dev = __in6_dev_get(dev);
+	if (in6_dev)
+		in6_dev->cnf.mc_forwarding++;
+
 	/*
 	 *	Fill in the VIF structures
 	 */
@@ -838,8 +851,6 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi,
 
 	skb->dst = dst_clone(pkt->dst);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-	skb_pull(skb, sizeof(struct ipv6hdr));
 	}
 
 	if (net->ipv6.mroute6_sk == NULL) {
@@ -1222,8 +1233,10 @@ static int ip6mr_sk_init(struct sock *sk)
 
 	rtnl_lock();
 	write_lock_bh(&mrt_lock);
-	if (likely(net->ipv6.mroute6_sk == NULL))
+	if (likely(net->ipv6.mroute6_sk == NULL)) {
 		net->ipv6.mroute6_sk = sk;
+		net->ipv6.devconf_all->mc_forwarding++;
+	}
 	else
 		err = -EADDRINUSE;
 	write_unlock_bh(&mrt_lock);
@@ -1242,6 +1255,7 @@ int ip6mr_sk_done(struct sock *sk)
 	if (sk == net->ipv6.mroute6_sk) {
 		write_lock_bh(&mrt_lock);
 		net->ipv6.mroute6_sk = NULL;
+		net->ipv6.devconf_all->mc_forwarding--;
 		write_unlock_bh(&mrt_lock);
 
 		mroute_clean_tables(net);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c4a5982..9c57423 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -794,7 +794,7 @@ void ip6_route_input(struct sk_buff *skb)
 		.proto = iph->nexthdr,
 	};
 
-	if (rt6_need_strict(&iph->daddr))
+	if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG)
 		flags |= RT6_LOOKUP_F_IFACE;
 
 	skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 5f94db2..9454d4a 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -77,6 +77,7 @@
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 
 #ifdef CONFIG_INET
 #include <net/inet_common.h>
@@ -175,6 +176,7 @@ struct packet_sock {
 #endif
 	struct packet_type	prot_hook;
 	spinlock_t		bind_lock;
+	struct mutex		pg_vec_lock;
 	unsigned int		running:1,	/* prot_hook is attached*/
 				auxdata:1,
 				origdev:1;
@@ -1069,6 +1071,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol)
 	 */
 
 	spin_lock_init(&po->bind_lock);
+	mutex_init(&po->pg_vec_lock);
 	po->prot_hook.func = packet_rcv;
 
 	if (sock->type == SOCK_PACKET)
@@ -1865,6 +1868,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 	synchronize_net();
 
 	err = -EBUSY;
+	mutex_lock(&po->pg_vec_lock);
 	if (closing || atomic_read(&po->mapped) == 0) {
 		err = 0;
 #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
@@ -1886,6 +1890,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 		if (atomic_read(&po->mapped))
 			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped));
 	}
+	mutex_unlock(&po->pg_vec_lock);
 
 	spin_lock(&po->bind_lock);
 	if (was_running && !po->running) {
@@ -1918,7 +1923,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st
 
 	size = vma->vm_end - vma->vm_start;
 
-	lock_sock(sk);
+	mutex_lock(&po->pg_vec_lock);
 	if (po->pg_vec == NULL)
 		goto out;
 	if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE)
@@ -1941,7 +1946,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st
 	err = 0;
 
 out:
-	release_sock(sk);
+	mutex_unlock(&po->pg_vec_lock);
 	return err;
 }
 #endif
diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c
index 87cf443..94d216a 100644
--- a/net/wimax/debugfs.c
+++ b/net/wimax/debugfs.c
@@ -28,17 +28,6 @@
 #include "debug-levels.h"
 
 
-/* Debug framework control of debug levels */
-struct d_level D_LEVEL[] = {
-	D_SUBMODULE_DEFINE(debugfs),
-	D_SUBMODULE_DEFINE(id_table),
-	D_SUBMODULE_DEFINE(op_msg),
-	D_SUBMODULE_DEFINE(op_reset),
-	D_SUBMODULE_DEFINE(op_rfkill),
-	D_SUBMODULE_DEFINE(stack),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
-
 #define __debugfs_register(prefix, name, parent)			\
 do {									\
 	result = d_level_register_debugfs(prefix, name, parent);	\
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index d4da92f..3869c03 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -516,6 +516,19 @@ void wimax_dev_rm(struct wimax_dev *wimax_dev)
 }
 EXPORT_SYMBOL_GPL(wimax_dev_rm);
 
+
+/* Debug framework control of debug levels */
+struct d_level D_LEVEL[] = {
+	D_SUBMODULE_DEFINE(debugfs),
+	D_SUBMODULE_DEFINE(id_table),
+	D_SUBMODULE_DEFINE(op_msg),
+	D_SUBMODULE_DEFINE(op_reset),
+	D_SUBMODULE_DEFINE(op_rfkill),
+	D_SUBMODULE_DEFINE(stack),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
 struct genl_family wimax_gnl_family = {
 	.id = GENL_ID_GENERATE,
 	.name = "WiMAX",
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index bc494ce..85c9034 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 	 * calculate the number of reg rules we will need. We will need one
 	 * for each channel subband */
 	while (country_ie_len >= 3) {
+		int end_channel = 0;
 		struct ieee80211_country_ie_triplet *triplet =
 			(struct ieee80211_country_ie_triplet *) country_ie;
 		int cur_sub_max_channel = 0, cur_channel = 0;
@@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 			continue;
 		}
 
+		/* 2 GHz */
+		if (triplet->chans.first_channel <= 14)
+			end_channel = triplet->chans.first_channel +
+				triplet->chans.num_channels;
+		else
+			/*
+			 * 5 GHz -- For example in country IEs if the first
+			 * channel given is 36 and the number of channels is 4
+			 * then the individual channel numbers defined for the
+			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+			 * and not 36, 37, 38, 39.
+			 *
+			 * See: http://tinyurl.com/11d-clarification
+			 */
+			end_channel =  triplet->chans.first_channel +
+				(4 * (triplet->chans.num_channels - 1));
+
 		cur_channel = triplet->chans.first_channel;
-		cur_sub_max_channel = ieee80211_channel_to_frequency(
-			cur_channel + triplet->chans.num_channels);
+		cur_sub_max_channel = end_channel;
 
 		/* Basic sanity check */
 		if (cur_sub_max_channel < cur_channel)
@@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 			end_channel = triplet->chans.first_channel +
 				triplet->chans.num_channels;
 		else
-			/*
-			 * 5 GHz -- For example in country IEs if the first
-			 * channel given is 36 and the number of channels is 4
-			 * then the individual channel numbers defined for the
-			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
-			 * and not 36, 37, 38, 39.
-			 *
-			 * See: http://tinyurl.com/11d-clarification
-			 */
 			end_channel =  triplet->chans.first_channel +
 				(4 * (triplet->chans.num_channels - 1));
 
@@ -1276,7 +1284,7 @@ static void reg_country_ie_process_debug(
 	if (intersected_rd) {
 		printk(KERN_DEBUG "cfg80211: We intersect both of these "
 			"and get:\n");
-		print_regdomain_info(rd);
+		print_regdomain_info(intersected_rd);
 		return;
 	}
 	printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");