Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

167 files changed, 10850 insertions, 4051 deletions

diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 66f92d1..a4efa04 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -12,6 +12,10 @@ Controller Drivers (HCD). So, if HCD is buggy, the traces reported by
 usbmon may not correspond to bus transactions precisely. This is the same
 situation as with tcpdump.
 
+Two APIs are currently implemented: "text" and "binary". The binary API
+is available through a character device in /dev namespace and is an ABI.
+The text API is deprecated since 2.6.35, but available for convenience.
+
 * How to use usbmon to collect raw text traces
 
 Unlike the packet socket, usbmon has an interface which provides traces
@@ -162,39 +166,11 @@ Here is the list of words, from left to right:
   not machine words, but really just a byte stream split into words to make
   it easier to read. Thus, the last word may contain from one to four bytes.
   The length of collected data is limited and can be less than the data length
-  report in Data Length word.
-
-Here is an example of code to read the data stream in a well known programming
-language:
-
-class ParsedLine {
-	int data_len;		/* Available length of data */
-	byte data[];
-
-	void parseData(StringTokenizer st) {
-		int availwords = st.countTokens();
-		data = new byte[availwords * 4];
-		data_len = 0;
-		while (st.hasMoreTokens()) {
-			String data_str = st.nextToken();
-			int len = data_str.length() / 2;
-			int i;
-			int b;	// byte is signed, apparently?! XXX
-			for (i = 0; i < len; i++) {
-				// data[data_len] = Byte.parseByte(
-				//     data_str.substring(i*2, i*2 + 2),
-				//     16);
-				b = Integer.parseInt(
-				     data_str.substring(i*2, i*2 + 2),
-				     16);
-				if (b >= 128)
-					b *= -1;
-				data[data_len] = (byte) b;
-				data_len++;
-			}
-		}
-	}
-}
+  reported in the Data Length word. In the case of an Isochronous input (Zi)
+  completion where the received data is sparse in the buffer, the length of
+  the collected data can be greater than the Data Length value (because Data
+  Length counts only the bytes that were received whereas the Data words
+  contain the entire transfer buffer).
 
 Examples:
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1c0c2b0..64dc417 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -229,7 +229,7 @@ usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
-obj-y					+= usb-ehci.o
+obj-y					+= usb-host.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index d4e41ef..7542ba5 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 6264564..deed2db 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 126,
@@ -211,7 +211,7 @@ static void __init omap_sdp_init(void)
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 07d1b20..f603f3b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -44,7 +44,6 @@
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
-#define OMAP4SDP_MDM_PWR_EN_GPIO	157
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
@@ -251,16 +250,6 @@ static void __init omap_4430sdp_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.phy_reset	= false,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL,
-};
-
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_OTG,
@@ -272,6 +261,7 @@ static struct twl4030_usb_data omap4_usbphy_data = {
 	.phy_exit	= omap4430_phy_exit,
 	.phy_power	= omap4430_phy_power,
 	.phy_set_clock	= omap4430_phy_set_clk,
+	.phy_suspend	= omap4430_phy_suspend,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -576,14 +566,6 @@ static void __init omap_4430sdp_init(void)
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
-	/* Power on the ULPI PHY */
-	status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
-	if (status)
-		pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__);
-	else
-		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
-
-	usb_ehci_init(&ehci_pdata);
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 71acb5a..e3a194f 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void)
 	omap_init_irq();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = GPIO_USB_NRESET,
@@ -103,7 +103,7 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 10d60b7..913538a 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void)
 	usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 #else
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -502,7 +502,7 @@ static void __init am3517_evm_init(void)
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index dac1416..9be7289 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
@@ -810,7 +810,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8f9a64d..8e18dc7 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
@@ -192,7 +192,7 @@ static int cm_t3517_init_usbh(void)
 		msleep(1);
 	}
 
-	usb_ehci_init(&cm_t3517_ehci_pdata);
+	usbhs_init(&cm_t3517_ehci_pdata);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 9a2a31e..bc0141b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -803,7 +803,7 @@ static void __init devkit8000_init(void)
 	devkit8000_ads7846_init();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3be85a1..f9f5344 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
@@ -699,7 +699,7 @@ static void __init igep2_init(void)
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	igep2_flash_init();
 	igep2_leds_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 4dc62a9..579fc2d 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void)
 void __init igep3_wifi_bt_init(void) {}
 #endif
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -435,7 +435,7 @@ static void __init igep3_init(void)
 	platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	igep3_flash_init();
 	igep3_leds_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 46d814a..f0963b6 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void)
 	gpio_direction_output(170, true);
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 323c380..38a2d91 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	/* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -700,7 +700,7 @@ static void __init omap3_evm_init(void)
 
 		/* setup EHCI phy reset config */
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		ehci_pdata.reset_gpio_port[1] = 21;
+		usbhs_bdata.reset_gpio_port[1] = 21;
 
 		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
 		musb_board_data.power = 500;
@@ -708,10 +708,10 @@ static void __init omap3_evm_init(void)
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		ehci_pdata.reset_gpio_port[1] = 135;
+		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 0b34bed..aa05f2e 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_vwlan_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 16,
@@ -716,7 +716,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 	gpmc_nand_init(&pandora_nand_data);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 2a2dad4..f6c8778 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	ads7846_dev_init();
 
 	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index db1f74f..84cfddb 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void)
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	omap3touchbook_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e944025..ed61c1f 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset  = false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void)
 	gpio_set_value(GPIO_HUB_NRESET, 0);
 	gpio_set_value(GPIO_HUB_NRESET, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
@@ -153,6 +153,7 @@ static struct twl4030_usb_data omap4_usbphy_data = {
 	.phy_exit	= omap4430_phy_exit,
 	.phy_power	= omap4430_phy_power,
 	.phy_set_clock	= omap4430_phy_set_clk,
+	.phy_suspend	= omap4430_phy_suspend,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index cb26e5d..08770cc 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -454,7 +454,7 @@ static void __init overo_init(void)
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index e26754c..1dd195a 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset		= true,
 	.reset_gpio_port[0]	= -EINVAL,
 	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
@@ -123,7 +123,7 @@ static void __init omap_zoom_init(void)
 	} else if (machine_is_omap_zoom3()) {
 		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-		usb_ehci_init(&ehci_pdata);
+		usbhs_init(&usbhs_bdata);
 	}
 
 	board_nand_init(zoom_nand_partitions,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 403a4a1..fbb1e30 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
@@ -3322,7 +3322,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
@@ -3368,11 +3368,20 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index de9ec8d..46fd3f6 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3197,7 +3197,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK("usbhs-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3209,8 +3209,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
+	CLK("usbhs-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
@@ -3219,8 +3219,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK("ehci-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK("ehci-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 745252c..ebe33df 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -43,6 +43,7 @@
 
 static struct clk *phyclk, *clk48m, *clk32k;
 static void __iomem *ctrl_base;
+static int usbotghs_control;
 
 int omap4430_phy_init(struct device *dev)
 {
@@ -103,13 +104,6 @@ int omap4430_phy_set_clk(struct device *dev, int on)
 int omap4430_phy_power(struct device *dev, int ID, int on)
 {
 	if (on) {
-		/* enabled the clocks */
-		omap4430_phy_set_clk(dev, 1);
-		/* power on the phy */
-		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
-			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-			mdelay(200);
-		}
 		if (ID)
 			/* enable VBUS valid, IDDIG groung */
 			__raw_writel(AVALID | VBUSVALID, ctrl_base +
@@ -125,10 +119,31 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
 		/* Enable session END and IDIG to high impedence. */
 		__raw_writel(SESSEND | IDDIG, ctrl_base +
 					USBOTGHS_CONTROL);
+	}
+	return 0;
+}
+
+int omap4430_phy_suspend(struct device *dev, int suspend)
+{
+	if (suspend) {
 		/* Disable the clocks */
 		omap4430_phy_set_clk(dev, 0);
 		/* Power down the phy */
 		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+
+		/* save the context */
+		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
+	} else {
+		/* Enable the internel phy clcoks */
+		omap4430_phy_set_clk(dev, 1);
+		/* power on the phy */
+		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+			mdelay(200);
+		}
+
+		/* restore the context */
+		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-host.c
index 25eeada..89ae298 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -1,14 +1,15 @@
 /*
- * linux/arch/arm/mach-omap2/usb-ehci.c
+ * usb-host.c - OMAP USB Host
  *
  * This file will contain the board specific details for the
- * Synopsys EHCI host controller on OMAP3430
+ * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
  *
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2011 Texas Instruments
  * Author: Vikram Pandita <vikram.pandita@ti.com>
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  *
  * Generalization by:
- * Felipe Balbi <felipe.balbi@nokia.com>
+ * Felipe Balbi <balbi@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,7 +20,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
+#include <linux/slab.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
@@ -30,44 +31,56 @@
 
 #include "mux.h"
 
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+#ifdef CONFIG_MFD_OMAP_USB_HOST
 
-static struct resource ehci_resources[] = {
+#define OMAP_USBHS_DEVICE	"usbhs-omap"
+
+static struct resource usbhs_resources[] = {
+	{
+		.name	= "uhh",
+		.flags	= IORESOURCE_MEM,
+	},
 	{
+		.name	= "tll",
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "ehci",
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "ehci-irq",
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "ohci",
 		.flags	= IORESOURCE_MEM,
 	},
-	{         /* general IRQ */
-		.flags   = IORESOURCE_IRQ,
+	{
+		.name	= "ohci-irq",
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
-static u64 ehci_dmamask = ~(u32)0;
-static struct platform_device ehci_device = {
-	.name           = "ehci-omap",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = &ehci_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
-		.platform_data          = NULL,
-	},
-	.num_resources  = ARRAY_SIZE(ehci_resources),
-	.resource       = ehci_resources,
+static struct platform_device usbhs_device = {
+	.name		= OMAP_USBHS_DEVICE,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
 };
 
+static struct usbhs_omap_platform_data		usbhs_data;
+static struct ehci_hcd_omap_platform_data	ehci_data;
+static struct ohci_hcd_omap_platform_data	ohci_data;
+
 /* MUX settings for EHCI pins */
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -81,7 +94,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
 		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb1_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb1_tll_clk",
@@ -107,14 +120,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -136,7 +149,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb2_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb2_tll_clk",
@@ -162,17 +175,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[2]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb3_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb3_tll_clk",
@@ -198,7 +211,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb3_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -207,10 +220,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb1_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb1_ulpiphy_clk",
@@ -236,7 +249,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb1_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb1_ulpitll_clk",
@@ -262,12 +275,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb2_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb2_ulpiphy_clk",
@@ -293,7 +306,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb2_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb2_ulpitll_clk",
@@ -319,90 +332,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 }
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
-{
-	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
-
-	/* Setup Pin IO MUX for EHCI */
-	if (cpu_is_omap34xx()) {
-		ehci_resources[0].start	= OMAP34XX_EHCI_BASE;
-		ehci_resources[0].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
-		ehci_resources[1].start	= OMAP34XX_UHH_CONFIG_BASE;
-		ehci_resources[1].end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		ehci_resources[2].start	= OMAP34XX_USBTLL_BASE;
-		ehci_resources[2].end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1;
-		ehci_resources[3].start = INT_34XX_EHCI_IRQ;
-		setup_ehci_io_mux(pdata->port_mode);
-	} else if (cpu_is_omap44xx()) {
-		ehci_resources[0].start	= OMAP44XX_HSUSB_EHCI_BASE;
-		ehci_resources[0].end	= OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
-		ehci_resources[1].start	= OMAP44XX_UHH_CONFIG_BASE;
-		ehci_resources[1].end	= OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1;
-		ehci_resources[2].start	= OMAP44XX_USBTLL_BASE;
-		ehci_resources[2].end	= OMAP44XX_USBTLL_BASE + SZ_4K - 1;
-		ehci_resources[3].start = OMAP44XX_IRQ_EHCI;
-		setup_4430ehci_io_mux(pdata->port_mode);
-	}
-
-	if (platform_device_register(&ehci_device) < 0) {
-		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
-		return;
-	}
-}
-
-#else
-
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
-
-{
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP34XX_OHCI_BASE,
-		.end	= OMAP34XX_OHCI_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP34XX_UHH_CONFIG_BASE,
-		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP34XX_USBTLL_BASE,
-		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* general IRQ */
-		.start	= INT_34XX_OHCI_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ohci_device = {
-	.name		= "ohci-omap3",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource	= ohci_resources,
-};
-
-static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -430,7 +366,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm1_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -461,7 +397,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm2_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -492,31 +428,147 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm3_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 }
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
-	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
+	switch (port_mode[0]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_mm_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
 
-	/* Setup Pin IO MUX for OHCI */
-	if (cpu_is_omap34xx())
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("usbb1_mm_txen",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_mm_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	default:
+		break;
+	}
+
+	switch (port_mode[1]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_mm_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("usbb2_mm_txen",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_mm_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	default:
+		break;
+	}
+}
+
+void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+{
+	int	i;
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+		usbhs_data.port_mode[i] = pdata->port_mode[i];
+		ohci_data.port_mode[i] = pdata->port_mode[i];
+		ehci_data.port_mode[i] = pdata->port_mode[i];
+		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
+		ehci_data.regulator[i] = pdata->regulator[i];
+	}
+	ehci_data.phy_reset = pdata->phy_reset;
+	ohci_data.es2_compatibility = pdata->es2_compatibility;
+	usbhs_data.ehci_data = &ehci_data;
+	usbhs_data.ohci_data = &ohci_data;
+
+	if (cpu_is_omap34xx()) {
+		usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
+		usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
+		usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
+		usbhs_resources[2].start	= OMAP34XX_EHCI_BASE;
+		usbhs_resources[2].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
+		usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
+		usbhs_resources[4].start	= OMAP34XX_OHCI_BASE;
+		usbhs_resources[4].end	= OMAP34XX_OHCI_BASE + SZ_1K - 1;
+		usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
+		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+	} else if (cpu_is_omap44xx()) {
+		usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
+		usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
+		usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
+		usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
+		usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
+		usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
+		usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
+		usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
+		usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
+		setup_4430ehci_io_mux(pdata->port_mode);
+		setup_4430ohci_io_mux(pdata->port_mode);
+	}
 
-	if (platform_device_register(&ohci_device) < 0) {
-		pr_err("Unable to register FS-USB (OHCI) device\n");
-		return;
+	if (platform_device_add_data(&usbhs_device,
+				&usbhs_data, sizeof(usbhs_data)) < 0) {
+		printk(KERN_ERR "USBHS platform_device_add_data failed\n");
+		goto init_end;
 	}
+
+	if (platform_device_register(&usbhs_device) < 0)
+		printk(KERN_ERR "USBHS platform_device_register failed\n");
+
+init_end:
+	return;
 }
 
 #else
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 }
 
-#endif /* CONFIG_USB_OHCI_HCD */
+#endif
+
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 5298949..241fc94 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -214,6 +214,10 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 
 	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+
+	if (cpu_is_omap44xx())
+		omap4430_phy_init(dev);
+
 }
 
 #else
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1a81fe1..1e93f17 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -162,29 +162,10 @@ struct gpio_chip h1940_latch_gpiochip = {
 	.get			= h1940_gpiolib_latch_get,
 };
 
-static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
-
-	switch (cmd)
-	{
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(H1940_LATCH_USB_DP, 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(H1940_LATCH_USB_DP, 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-	.udc_command		= h1940_udc_pullup,
 	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
+	.pullup_pin		= H1940_LATCH_USB_DP,
 };
 
 static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
@@ -475,9 +456,6 @@ static void __init h1940_init(void)
 	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
 	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
 
-	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
-	gpio_direction_output(H1940_LATCH_USB_DP, 0);
-
 	gpio_request(H1940_LATCH_SD_POWER, "SD power");
 	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 271b9aa..66f4444 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -84,26 +84,10 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
 	},
 };
 
-static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE :
-		gpio_set_value(S3C2410_GPB(3), 1);
-		break;
-	case S3C2410_UDC_P_DISABLE :
-		gpio_set_value(S3C2410_GPB(3), 0);
-		break;
-	case S3C2410_UDC_P_RESET :
-		break;
-	default:
-		break;
-	}
-}
-
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-	.udc_command		= n30_udc_pullup,
 	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
+	.pullup_pin		= S3C2410_GPB(3),
 };
 
 static struct gpio_keys_button n30_buttons[] = {
@@ -596,9 +580,6 @@ static void __init n30_init(void)
 
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
-
-	WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
-	gpio_direction_output(S3C2410_GPB(3), 0);
 }
 
 MACHINE_START(N30, "Acer-N30")
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 8e5758b..834cfb6 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -78,28 +78,9 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
 	}
 };
 
-static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
-
-	switch (cmd)
-	{
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPF(2), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPF(2), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 
 static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-	.udc_command		= smdk2413_udc_pullup,
+	.pullup_pin = S3C2410_GPF(2),
 };
 
 
@@ -133,9 +114,6 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull"));
-	gpio_direction_output(S3C2410_GPF(2), 0);
-
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9f2c14e..37405d9 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -455,28 +455,10 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 };
 
 
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
-		/* FIXME: Do something here. */
-	}
-}
-
 /* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
 	.vbus_draw	= gta02_udc_vbus_draw,
-	.udc_command	= gta02_udc_command,
-
+	.pullup_pin = GTA02_GPIO_USB_PULLUP,
 };
 
 /* USB */
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c..d80f129 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	pr_debug("udc: pullup(%d)\n", cmd);
-
-	switch (cmd) {
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPC(5), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPC(5), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.udc_command		= mini2440_udc_pullup,
+	.pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -644,10 +626,6 @@ static void __init mini2440_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
 	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-	/* Make sure the D+ pullup pin is output */
-	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-	gpio_direction_output(S3C2410_GPC(5), 0);
-
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
 		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index eab6ae5..86bbc23 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -566,26 +566,10 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 	.sets = rx1950_nand_sets,
 };
 
-static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		gpio_direction_output(S3C2410_GPJ(5), 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		gpio_direction_output(S3C2410_GPJ(5), 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		break;
-	default:
-		break;
-	}
-}
-
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.udc_command = rx1950_udc_pullup,
 	.vbus_pin = S3C2410_GPG(5),
 	.vbus_pin_inverted = 1,
+	.pullup_pin = S3C2410_GPJ(5),
 };
 
 static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -750,9 +734,6 @@ static void __init rx1950_init_machine(void)
 						S3C2410_MISCCR_USBSUSPND0 |
 						S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
-	gpio_direction_output(S3C2410_GPJ(5), 0);
-
 	/* mmc power is disabled by default */
 	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
 	gpio_direction_output(S3C2410_GPJ(1), 0);
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b94e52d..622a9ec 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 9bf39fa..9f7a7e1 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
+obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
 obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
 obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
new file mode 100644
index 0000000..d4b8f9e
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/include/mach/usb_phy.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_USB_PHY_H
+#define __MACH_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+	int reset_gpio;
+	const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+	TEGRA_USB_PHY_MODE_DEVICE,
+	TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	enum tegra_usb_phy_mode mode;
+	void *config;
+	struct otg_transceiver *ulpi;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode);
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy);
+
+#endif /* __MACH_USB_PHY_H */
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
new file mode 100644
index 0000000..88081bb
--- /dev/null
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -0,0 +1,795 @@
+/*
+ * arch/arm/mach-tegra/usb_phy.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *	Benoit Goby <benoit@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <asm/mach-types.h>
+#include <mach/usb_phy.h>
+#include <mach/iomap.h>
+
+#define ULPI_VIEWPORT		0x170
+
+#define USB_PORTSC1		0x184
+#define   USB_PORTSC1_PTS(x)	(((x) & 0x3) << 30)
+#define   USB_PORTSC1_PSPD(x)	(((x) & 0x3) << 26)
+#define   USB_PORTSC1_PHCD	(1 << 23)
+#define   USB_PORTSC1_WKOC	(1 << 22)
+#define   USB_PORTSC1_WKDS	(1 << 21)
+#define   USB_PORTSC1_WKCN	(1 << 20)
+#define   USB_PORTSC1_PTC(x)	(((x) & 0xf) << 16)
+#define   USB_PORTSC1_PP	(1 << 12)
+#define   USB_PORTSC1_SUSP	(1 << 7)
+#define   USB_PORTSC1_PE	(1 << 2)
+#define   USB_PORTSC1_CCS	(1 << 0)
+
+#define USB_SUSP_CTRL		0x400
+#define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
+#define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
+#define   USB_SUSP_CLR		(1 << 5)
+#define   USB_PHY_CLK_VALID	(1 << 7)
+#define   UTMIP_RESET			(1 << 11)
+#define   UHSIC_RESET			(1 << 11)
+#define   UTMIP_PHY_ENABLE		(1 << 12)
+#define   ULPI_PHY_ENABLE	(1 << 13)
+#define   USB_SUSP_SET		(1 << 14)
+#define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
+
+#define USB1_LEGACY_CTRL	0x410
+#define   USB1_NO_LEGACY_MODE			(1 << 0)
+#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
+#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+						(1 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
+#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
+
+#define ULPI_TIMING_CTRL_0	0x424
+#define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
+#define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
+
+#define ULPI_TIMING_CTRL_1	0x428
+#define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
+#define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
+#define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
+#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
+#define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
+#define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1		0x804
+#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
+#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0		0x808
+#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
+#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
+#define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
+
+#define UTMIP_BIAS_CFG0		0x80c
+#define   UTMIP_OTGPD			(1 << 11)
+#define   UTMIP_BIASPD			(1 << 10)
+
+#define UTMIP_HSRX_CFG0		0x810
+#define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
+#define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1		0x814
+#define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0		0x820
+#define   UTMIP_FS_PREABMLE_J		(1 << 19)
+#define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
+
+#define UTMIP_MISC_CFG0		0x824
+#define   UTMIP_DPDM_OBSERVE		(1 << 26)
+#define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
+
+#define UTMIP_MISC_CFG1		0x828
+#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
+#define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0	0x82c
+#define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0	0x830
+#define   UTMIP_PD_CHRG			(1 << 0)
+
+#define UTMIP_SPARE_CFG0	0x834
+#define   FUSE_SETUP_SEL		(1 << 3)
+
+#define UTMIP_XCVR_CFG1		0x838
+#define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
+#define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
+#define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
+#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1		0x83c
+#define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static int utmip_pad_count;
+
+struct tegra_xtal_freq {
+	int freq;
+	u8 enable_delay;
+	u8 stable_count;
+	u8 active_delay;
+	u8 xtal_freq_count;
+	u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+	{
+		.freq = 12000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x2F,
+		.active_delay = 0x04,
+		.xtal_freq_count = 0x76,
+		.debounce = 0x7530,
+	},
+	{
+		.freq = 13000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x33,
+		.active_delay = 0x05,
+		.xtal_freq_count = 0x7F,
+		.debounce = 0x7EF4,
+	},
+	{
+		.freq = 19200000,
+		.enable_delay = 0x03,
+		.stable_count = 0x4B,
+		.active_delay = 0x06,
+		.xtal_freq_count = 0xBB,
+		.debounce = 0xBB80,
+	},
+	{
+		.freq = 26000000,
+		.enable_delay = 0x04,
+		.stable_count = 0x66,
+		.active_delay = 0x09,
+		.xtal_freq_count = 0xFE,
+		.debounce = 0xFDE8,
+	},
+};
+
+static struct tegra_utmip_config utmip_default[] = {
+	[0] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 1,
+		.xcvr_lsrslew = 1,
+	},
+	[2] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 2,
+		.xcvr_lsrslew = 2,
+	},
+};
+
+static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
+{
+	return (phy->instance == 1);
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+	phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+	if (IS_ERR(phy->pad_clk)) {
+		pr_err("%s: can't get utmip pad clock\n", __func__);
+		return PTR_ERR(phy->pad_clk);
+	}
+
+	if (phy->instance == 0) {
+		phy->pad_regs = phy->regs;
+	} else {
+		phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
+		if (!phy->pad_regs) {
+			pr_err("%s: can't remap usb registers\n", __func__);
+			clk_put(phy->pad_clk);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static void utmip_pad_close(struct tegra_usb_phy *phy)
+{
+	if (phy->instance != 0)
+		iounmap(phy->pad_regs);
+	clk_put(phy->pad_clk);
+}
+
+static void utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (utmip_pad_count++ == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	if (!utmip_pad_count) {
+		pr_err("%s: utmip pad already powered off\n", __func__);
+		return -EINVAL;
+	}
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (--utmip_pad_count == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val |= UTMIP_OTGPD | UTMIP_BIASPD;
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+
+	return 0;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+	unsigned long timeout = 2000;
+	do {
+		if ((readl(reg) & mask) == result)
+			return 0;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	return -1;
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val |= USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+						     USB_PHY_CLK_VALID))
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_utmip_config *config = phy->config;
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val |= USB1_NO_LEGACY_MODE;
+		writel(val, base + USB1_LEGACY_CTRL);
+	}
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_FS_PREABMLE_J;
+	writel(val, base + UTMIP_TX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG0);
+	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+	writel(val, base + UTMIP_HSRX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG1);
+	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+	writel(val, base + UTMIP_HSRX_CFG1);
+
+	val = readl(base + UTMIP_DEBOUNCE_CFG0);
+	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+	writel(val, base + UTMIP_DEBOUNCE_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+	writel(val, base + UTMIP_MISC_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG1);
+	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
+	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+	writel(val, base + UTMIP_MISC_CFG1);
+
+	val = readl(base + UTMIP_PLL_CFG1);
+	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+	writel(val, base + UTMIP_PLL_CFG1);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmip_pad_power_on(phy);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
+		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
+		 UTMIP_XCVR_HSSLEW_MSB(~0));
+	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val &= ~UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_BIAS_CFG1);
+	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+	writel(val, base + UTMIP_BIAS_CFG1);
+
+	if (phy->instance == 0) {
+		val = readl(base + UTMIP_SPARE_CFG0);
+		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
+			val &= ~FUSE_SETUP_SEL;
+		else
+			val |= FUSE_SETUP_SEL;
+		writel(val, base + UTMIP_SPARE_CFG0);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= UTMIP_PHY_ENABLE;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val &= ~USB1_VBUS_SENSE_CTL_MASK;
+		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+		writel(val, base + USB1_LEGACY_CTRL);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmi_phy_clk_enable(phy);
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PTS(~0);
+		writel(val, base + USB_PORTSC1);
+	}
+
+	return 0;
+}
+
+static void utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	utmi_phy_clk_disable(phy);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val |= UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+	       UTMIP_FORCE_PDZI_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+	       UTMIP_FORCE_PDDR_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val |= UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+				   enum tegra_usb_phy_port_speed port_speed)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+	else
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(1);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val |= UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	int ret;
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	gpio_direction_output(config->reset_gpio, 0);
+	msleep(5);
+	gpio_direction_output(config->reset_gpio, 1);
+
+	clk_enable(phy->clk);
+	msleep(1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UHSIC_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + ULPI_TIMING_CTRL_0);
+	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+	writel(val, base + ULPI_TIMING_CTRL_0);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= ULPI_PHY_ENABLE;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = 0;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	val |= ULPI_DATA_TRIMMER_SEL(4);
+	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+	val |= ULPI_DIR_TRIMMER_SEL(4);
+	writel(val, base + ULPI_TIMING_CTRL_1);
+	udelay(10);
+
+	val |= ULPI_DATA_TRIMMER_LOAD;
+	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+	val |= ULPI_DIR_TRIMMER_LOAD;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	/* Fix VbusInvalid due to floating VBUS */
+	ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	val = readl(base + USB_PORTSC1);
+	val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
+	writel(val, base + USB_PORTSC1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+	udelay(100);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+
+	return 0;
+}
+
+static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	/* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
+	 * Controller to immediately bring the ULPI PHY out of low power
+	 */
+	val = readl(base + USB_PORTSC1);
+	val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
+	writel(val, base + USB_PORTSC1);
+
+	gpio_direction_output(config->reset_gpio, 0);
+	clk_disable(phy->clk);
+}
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode)
+{
+	struct tegra_usb_phy *phy;
+	struct tegra_ulpi_config *ulpi_config;
+	unsigned long parent_rate;
+	int i;
+	int err;
+
+	phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
+	if (!phy)
+		return ERR_PTR(-ENOMEM);
+
+	phy->instance = instance;
+	phy->regs = regs;
+	phy->config = config;
+	phy->mode = phy_mode;
+
+	if (!phy->config) {
+		if (phy_is_ulpi(phy)) {
+			pr_err("%s: ulpi phy configuration missing", __func__);
+			err = -EINVAL;
+			goto err0;
+		} else {
+			phy->config = &utmip_default[instance];
+		}
+	}
+
+	phy->pll_u = clk_get_sys(NULL, "pll_u");
+	if (IS_ERR(phy->pll_u)) {
+		pr_err("Can't get pll_u clock\n");
+		err = PTR_ERR(phy->pll_u);
+		goto err0;
+	}
+	clk_enable(phy->pll_u);
+
+	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+		if (tegra_freq_table[i].freq == parent_rate) {
+			phy->freq = &tegra_freq_table[i];
+			break;
+		}
+	}
+	if (!phy->freq) {
+		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
+		err = -EINVAL;
+		goto err1;
+	}
+
+	if (phy_is_ulpi(phy)) {
+		ulpi_config = config;
+		phy->clk = clk_get_sys(NULL, ulpi_config->clk);
+		if (IS_ERR(phy->clk)) {
+			pr_err("%s: can't get ulpi clock\n", __func__);
+			err = -ENXIO;
+			goto err1;
+		}
+		tegra_gpio_enable(ulpi_config->reset_gpio);
+		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
+		gpio_direction_output(ulpi_config->reset_gpio, 0);
+		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+		phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
+	} else {
+		err = utmip_pad_open(phy);
+		if (err < 0)
+			goto err1;
+	}
+
+	return phy;
+
+err1:
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+err0:
+	kfree(phy);
+	return ERR_PTR(err);
+}
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		return ulpi_phy_power_on(phy);
+	else
+		return utmi_phy_power_on(phy);
+}
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		ulpi_phy_power_off(phy);
+	else
+		utmi_phy_power_off(phy);
+}
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_preresume(phy);
+}
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_postresume(phy);
+}
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_start(phy, port_speed);
+}
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_end(phy);
+}
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_disable(phy);
+}
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_enable(phy);
+}
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		clk_put(phy->clk);
+	else
+		utmip_pad_close(phy);
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+	kfree(phy);
+}
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 450a332..fe449f1 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
-enum ehci_hcd_omap_mode {
-	EHCI_HCD_OMAP_MODE_UNKNOWN,
-	EHCI_HCD_OMAP_MODE_PHY,
-	EHCI_HCD_OMAP_MODE_TLL,
-	EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-	OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
 
-	/* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -80,18 +98,18 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern int omap_usbhs_enable(struct device *dev);
+extern void omap_usbhs_disable(struct device *dev);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
-
+extern int omap4430_phy_suspend(struct device *dev, int suspend);
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h
index 546bb40..80457c6 100644
--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
+++ b/arch/arm/plat-s3c24xx/include/plat/udc.h
@@ -27,6 +27,10 @@ enum s3c2410_udc_cmd_e {
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
  	void	(*vbus_draw)(unsigned int ma);
+
+	unsigned int pullup_pin;
+	unsigned int pullup_pin_inverted;
+
 	unsigned int vbus_pin;
 	unsigned char vbus_pin_inverted;
 };
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fd01836..a6dfa37a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -624,6 +624,15 @@ config MFD_WL1273_CORE
 	  driver connects the radio-wl1273 V4L2 module and the wl1273
 	  audio codec.
 
+config MFD_OMAP_USB_HOST
+	bool "Support OMAP USBHS core driver"
+	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+	default y
+	help
+	  This is the core driver for the OAMP EHCI and OHCI drivers.
+	  This MFD driver does the required setup functionalities for
+	  OMAP USB Host drivers.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a54e2c7..91fe384 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -83,3 +83,4 @@ obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
 obj-$(CONFIG_MFD_VX855)		+= vx855.o
 obj-$(CONFIG_MFD_WL1273_CORE)	+= wl1273-core.o
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
new file mode 100644
index 0000000..cb01209
--- /dev/null
+++ b/drivers/mfd/omap-usb-host.c
@@ -0,0 +1,1061 @@
+/**
+ * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <plat/usb.h>
+
+#define USBHS_DRIVER_NAME	"usbhs-omap"
+#define OMAP_EHCI_DEVICE	"ehci-omap"
+#define OMAP_OHCI_DEVICE	"ohci-omap3"
+
+/* OMAP USBHOST Register addresses  */
+
+/* TLL Register Set */
+#define	OMAP_USBTLL_REVISION				(0x00)
+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
+
+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
+
+#define	OMAP_TLL_SHARED_CONF				(0x30)
+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
+
+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
+
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1
+#define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2
+#define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5
+#define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6
+#define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7
+#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA
+#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB
+
+#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
+#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
+#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
+#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
+
+#define OMAP_TLL_CHANNEL_COUNT				3
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
+#define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
+
+#define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
+#define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
+
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
+
+
+struct usbhs_hcd_omap {
+	struct clk			*usbhost_ick;
+	struct clk			*usbhost_hs_fck;
+	struct clk			*usbhost_fs_fck;
+	struct clk			*xclk60mhsp1_ck;
+	struct clk			*xclk60mhsp2_ck;
+	struct clk			*utmi_p1_fck;
+	struct clk			*usbhost_p1_fck;
+	struct clk			*usbtll_p1_fck;
+	struct clk			*utmi_p2_fck;
+	struct clk			*usbhost_p2_fck;
+	struct clk			*usbtll_p2_fck;
+	struct clk			*init_60m_fclk;
+	struct clk			*usbtll_fck;
+	struct clk			*usbtll_ick;
+
+	void __iomem			*uhh_base;
+	void __iomem			*tll_base;
+
+	struct usbhs_omap_platform_data	platdata;
+
+	u32				usbhs_rev;
+	spinlock_t			lock;
+	int				count;
+};
+/*-------------------------------------------------------------------------*/
+
+const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
+static u64 usbhs_dmamask = ~(u32)0;
+
+/*-------------------------------------------------------------------------*/
+
+static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 usbhs_read(void __iomem *base, u32 reg)
+{
+	return __raw_readl(base + reg);
+}
+
+static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
+{
+	__raw_writeb(val, base + reg);
+}
+
+static inline u8 usbhs_readb(void __iomem *base, u8 reg)
+{
+	return __raw_readb(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_device *omap_usbhs_alloc_child(const char *name,
+			struct resource	*res, int num_resources, void *pdata,
+			size_t pdata_size, struct device *dev)
+{
+	struct platform_device	*child;
+	int			ret;
+
+	child = platform_device_alloc(name, 0);
+
+	if (!child) {
+		dev_err(dev, "platform_device_alloc %s failed\n", name);
+		goto err_end;
+	}
+
+	ret = platform_device_add_resources(child, res, num_resources);
+	if (ret) {
+		dev_err(dev, "platform_device_add_resources failed\n");
+		goto err_alloc;
+	}
+
+	ret = platform_device_add_data(child, pdata, pdata_size);
+	if (ret) {
+		dev_err(dev, "platform_device_add_data failed\n");
+		goto err_alloc;
+	}
+
+	child->dev.dma_mask		= &usbhs_dmamask;
+	child->dev.coherent_dma_mask	= 0xffffffff;
+	child->dev.parent		= dev;
+
+	ret = platform_device_add(child);
+	if (ret) {
+		dev_err(dev, "platform_device_add failed\n");
+		goto err_alloc;
+	}
+
+	return child;
+
+err_alloc:
+	platform_device_put(child);
+
+err_end:
+	return NULL;
+}
+
+static int omap_usbhs_alloc_children(struct platform_device *pdev)
+{
+	struct device				*dev = &pdev->dev;
+	struct usbhs_hcd_omap			*omap;
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+	struct platform_device			*ehci;
+	struct platform_device			*ohci;
+	struct resource				*res;
+	struct resource				resources[2];
+	int					ret;
+
+	omap = platform_get_drvdata(pdev);
+	ehci_data = omap->platdata.ehci_data;
+	ohci_data = omap->platdata.ohci_data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
+	if (!res) {
+		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
+	if (!res) {
+		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[1] = *res;
+
+	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
+		sizeof(*ehci_data), dev);
+
+	if (!ehci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_end;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[1] = *res;
+
+	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
+		sizeof(*ohci_data), dev);
+	if (!ohci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_ehci;
+	}
+
+	return 0;
+
+err_ehci:
+	platform_device_put(ehci);
+
+err_end:
+	return ret;
+}
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
+{
+	struct device			*dev =  &pdev->dev;
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	struct usbhs_hcd_omap		*omap;
+	struct resource			*res;
+	int				ret = 0;
+	int				i;
+
+	if (!pdata) {
+		dev_err(dev, "Missing platfrom data\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	spin_lock_init(&omap->lock);
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+		omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+	omap->platdata.ehci_data = pdata->ehci_data;
+	omap->platdata.ohci_data = pdata->ohci_data;
+
+	omap->usbhost_ick = clk_get(dev, "usbhost_ick");
+	if (IS_ERR(omap->usbhost_ick)) {
+		ret =  PTR_ERR(omap->usbhost_ick);
+		dev_err(dev, "usbhost_ick failed error:%d\n", ret);
+		goto err_end;
+	}
+
+	omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
+		dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
+		goto err_usbhost_ick;
+	}
+
+	omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
+		dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
+		goto err_usbhost_hs_fck;
+	}
+
+	omap->usbtll_fck = clk_get(dev, "usbtll_fck");
+	if (IS_ERR(omap->usbtll_fck)) {
+		ret = PTR_ERR(omap->usbtll_fck);
+		dev_err(dev, "usbtll_fck failed error:%d\n", ret);
+		goto err_usbhost_fs_fck;
+	}
+
+	omap->usbtll_ick = clk_get(dev, "usbtll_ick");
+	if (IS_ERR(omap->usbtll_ick)) {
+		ret = PTR_ERR(omap->usbtll_ick);
+		dev_err(dev, "usbtll_ick failed error:%d\n", ret);
+		goto err_usbtll_fck;
+	}
+
+	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(omap->utmi_p1_fck)) {
+		ret = PTR_ERR(omap->utmi_p1_fck);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
+		goto err_usbtll_ick;
+	}
+
+	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	if (IS_ERR(omap->xclk60mhsp1_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp1_ck);
+		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+		goto err_utmi_p1_fck;
+	}
+
+	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(omap->utmi_p2_fck)) {
+		ret = PTR_ERR(omap->utmi_p2_fck);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_xclk60mhsp1_ck;
+	}
+
+	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	if (IS_ERR(omap->xclk60mhsp2_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp2_ck);
+		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+		goto err_utmi_p2_fck;
+	}
+
+	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+	if (IS_ERR(omap->usbhost_p1_fck)) {
+		ret = PTR_ERR(omap->usbhost_p1_fck);
+		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+		goto err_xclk60mhsp2_ck;
+	}
+
+	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+	if (IS_ERR(omap->usbtll_p1_fck)) {
+		ret = PTR_ERR(omap->usbtll_p1_fck);
+		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+		goto err_usbhost_p1_fck;
+	}
+
+	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+	if (IS_ERR(omap->usbhost_p2_fck)) {
+		ret = PTR_ERR(omap->usbhost_p2_fck);
+		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+		goto err_usbtll_p1_fck;
+	}
+
+	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+	if (IS_ERR(omap->usbtll_p2_fck)) {
+		ret = PTR_ERR(omap->usbtll_p2_fck);
+		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+		goto err_usbhost_p2_fck;
+	}
+
+	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	if (IS_ERR(omap->init_60m_fclk)) {
+		ret = PTR_ERR(omap->init_60m_fclk);
+		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+		goto err_usbtll_p2_fck;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_init_60m_fclk;
+	}
+
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_init_60m_fclk;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_tll;
+	}
+
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	ret = omap_usbhs_alloc_children(pdev);
+	if (ret) {
+		dev_err(dev, "omap_usbhs_alloc_children failed\n");
+		goto err_alloc;
+	}
+
+	goto end_probe;
+
+err_alloc:
+	iounmap(omap->tll_base);
+
+err_tll:
+	iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+	clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+	clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+	clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+	clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+	clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+	clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+	clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+	clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+	clk_put(omap->utmi_p1_fck);
+
+err_usbtll_ick:
+	clk_put(omap->usbtll_ick);
+
+err_usbtll_fck:
+	clk_put(omap->usbtll_fck);
+
+err_usbhost_fs_fck:
+	clk_put(omap->usbhost_fs_fck);
+
+err_usbhost_hs_fck:
+	clk_put(omap->usbhost_hs_fck);
+
+err_usbhost_ick:
+	clk_put(omap->usbhost_ick);
+
+err_end:
+	kfree(omap);
+
+end_probe:
+	return ret;
+}
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+{
+	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+	if (omap->count != 0) {
+		dev_err(&pdev->dev,
+			"Either EHCI or OHCI is still using usbhs core\n");
+		return -EBUSY;
+	}
+
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	clk_put(omap->init_60m_fclk);
+	clk_put(omap->usbtll_p2_fck);
+	clk_put(omap->usbhost_p2_fck);
+	clk_put(omap->usbtll_p1_fck);
+	clk_put(omap->usbhost_p1_fck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_put(omap->utmi_p2_fck);
+	clk_put(omap->xclk60mhsp1_ck);
+	clk_put(omap->utmi_p1_fck);
+	clk_put(omap->usbtll_ick);
+	clk_put(omap->usbtll_fck);
+	clk_put(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_ick);
+	kfree(omap);
+
+	return 0;
+}
+
+static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
+{
+	switch (pmode) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+ * convert the port-mode enum to a value we can use in the FSLSMODE
+ * field of USBTLL_CHANNEL_CONF
+ */
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
+{
+	switch (mode) {
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
+	default:
+		pr_warning("Invalid port mode, using default\n");
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+	}
+}
+
+static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	unsigned			reg;
+	int				i;
+
+	/* Program Common TLL register */
+	reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
+	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
+		| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
+
+	usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
+
+	/* Enable channels now */
+	for (i = 0; i < tll_channel_count; i++) {
+		reg = usbhs_read(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i));
+
+		if (is_ohci_port(pdata->port_mode[i])) {
+			reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
+				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
+			reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
+		} else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
+
+			/* Disable AutoIdle, BitStuffing and use SDR Mode */
+			reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
+				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
+				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
+
+			reg |= (1 << (i + 1));
+		} else
+			continue;
+
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
+		usbhs_write(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i), reg);
+
+		usbhs_writeb(omap->tll_base,
+				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
+	}
+}
+
+static int usbhs_enable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	int				ret = 0;
+	unsigned long			timeout;
+	unsigned			reg;
+
+	dev_dbg(dev, "starting TI HSUSB Controller\n");
+	if (!pdata) {
+		dev_dbg(dev, "missing platform_data\n");
+		ret =  -ENODEV;
+		goto end_enable;
+	}
+
+	spin_lock_irqsave(&omap->lock, flags);
+	if (omap->count > 0)
+		goto end_count;
+
+	clk_enable(omap->usbhost_ick);
+	clk_enable(omap->usbhost_hs_fck);
+	clk_enable(omap->usbhost_fs_fck);
+	clk_enable(omap->usbtll_fck);
+	clk_enable(omap->usbtll_ick);
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[0],
+						"USB1 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[0], 1);
+		}
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[1],
+						"USB2 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[1], 1);
+		}
+
+		/* Hold the PHY in RESET for enough time till DIR is high */
+		udelay(10);
+	}
+
+	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+	/* Wait for TLL reset to complete */
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(dev, "operation timed out\n");
+			ret = -EINVAL;
+			goto err_tll;
+		}
+	}
+
+	dev_dbg(dev, "TLL RESET DONE\n");
+
+	/* (1<<3) = no idle mode only for initial debugging */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+			OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	if (is_omap_usbhs_rev1(omap)) {
+		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+				| OMAP_UHH_SYSCONFIG_SIDLEMODE
+				| OMAP_UHH_SYSCONFIG_CACTIVITY
+				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+
+	} else if (is_omap_usbhs_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	if (is_omap_usbhs_rev1(omap)) {
+		if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+		if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+		if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+		/* Bypass the TLL module for PHY mode operation */
+		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
+				is_ehci_phy_mode(pdata->port_mode[1]) ||
+					is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		} else {
+			dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[1]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_usbhs_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_phy_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p1_fck);
+			clk_enable(omap->usbtll_p1_fck);
+		}
+
+		if (is_ehci_phy_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+					"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p2_fck);
+			clk_enable(omap->usbtll_p2_fck);
+		}
+
+		clk_enable(omap->utmi_p1_fck);
+		clk_enable(omap->utmi_p2_fck);
+
+		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+			(is_ohci_port(pdata->port_mode[0])))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
+
+		if (is_ehci_tll_mode(pdata->port_mode[1]) ||
+			(is_ohci_port(pdata->port_mode[1])))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+		is_ehci_tll_mode(pdata->port_mode[1]) ||
+		is_ehci_tll_mode(pdata->port_mode[2]) ||
+		(is_ohci_port(pdata->port_mode[0])) ||
+		(is_ohci_port(pdata->port_mode[1])) ||
+		(is_ohci_port(pdata->port_mode[2]))) {
+
+		/* Enable UTMI mode for required TLL channels */
+		if (is_omap_usbhs_rev2(omap))
+			usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
+		else
+			usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		/* Hold the PHY in RESET for enough time till
+		 * PHY is settled and ready
+		 */
+		udelay(10);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[0], 0);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[1], 0);
+	}
+
+end_count:
+	omap->count++;
+	goto end_enable;
+
+err_tll:
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_enable:
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return ret;
+}
+
+static void usbhs_disable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	unsigned long			timeout;
+
+	dev_dbg(dev, "stopping TI HSUSB Controller\n");
+
+	spin_lock_irqsave(&omap->lock, flags);
+
+	if (omap->count == 0)
+		goto end_disble;
+
+	omap->count--;
+
+	if (omap->count != 0)
+		goto end_disble;
+
+	/* Reset OMAP modules for insmod/rmmod to work */
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_usbhs_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
+			OMAP_UHH_SYSCONFIG_SOFTRESET);
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 1))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 2))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->utmi_p2_fck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_disble:
+	spin_unlock_irqrestore(&omap->lock, flags);
+}
+
+int omap_usbhs_enable(struct device *dev)
+{
+	return  usbhs_enable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_enable);
+
+void omap_usbhs_disable(struct device *dev)
+{
+	usbhs_disable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+static struct platform_driver usbhs_omap_driver = {
+	.driver = {
+		.name		= (char *)usbhs_driver_name,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __exit_p(usbhs_omap_remove),
+};
+
+MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
+
+static int __init omap_usbhs_drvinit(void)
+{
+	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
+}
+
+/*
+ * init before ehci and ohci drivers;
+ * The usbhs core driver should be initialized much before
+ * the omap ehci and ohci probe functions are called.
+ */
+fs_initcall(omap_usbhs_drvinit);
+
+static void __exit omap_usbhs_drvexit(void)
+{
+	platform_driver_unregister(&usbhs_omap_driver);
+}
+module_exit(omap_usbhs_drvexit);
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index a35fe61..29ccc01 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -255,8 +255,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 	desc->wHubCharacteristics = (__force __u16)
 		(__constant_cpu_to_le16(0x0001));
 	desc->bNbrPorts = VHCI_NPORTS;
-	desc->bitmap[0] = 0xff;
-	desc->bitmap[1] = 0xff;
+	desc->u.hs.DeviceRemovable[0] = 0xff;
+	desc->u.hs.DeviceRemovable[1] = 0xff;
 }
 
 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 99ac70e..b268e9f 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -168,7 +168,6 @@ struct uea_softc {
 	union cmv_dsc cmv_dsc;
 
 	struct work_struct task;
-	struct workqueue_struct *work_q;
 	u16 pageno;
 	u16 ovl;
 
@@ -1879,7 +1878,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	/* start loading DSP */
 	sc->pageno = 0;
 	sc->ovl = 0;
-	queue_work(sc->work_q, &sc->task);
+	schedule_work(&sc->task);
 
 	/* wait for modem ready CMV */
 	ret = wait_cmv_ack(sc);
@@ -2091,14 +2090,14 @@ static void uea_schedule_load_page_e1(struct uea_softc *sc,
 {
 	sc->pageno = intr->e1_bSwapPageNo;
 	sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
-	queue_work(sc->work_q, &sc->task);
+	schedule_work(&sc->task);
 }
 
 static void uea_schedule_load_page_e4(struct uea_softc *sc,
 						struct intr_pkt *intr)
 {
 	sc->pageno = intr->e4_bSwapPageNo;
-	queue_work(sc->work_q, &sc->task);
+	schedule_work(&sc->task);
 }
 
 /*
@@ -2170,13 +2169,6 @@ static int uea_boot(struct uea_softc *sc)
 
 	init_waitqueue_head(&sc->sync_q);
 
-	sc->work_q = create_workqueue("ueagle-dsp");
-	if (!sc->work_q) {
-		uea_err(INS_TO_USBDEV(sc), "cannot allocate workqueue\n");
-		uea_leaves(INS_TO_USBDEV(sc));
-		return -ENOMEM;
-	}
-
 	if (UEA_CHIP_VERSION(sc) == ADI930)
 		load_XILINX_firmware(sc);
 
@@ -2225,7 +2217,6 @@ err1:
 	sc->urb_int = NULL;
 	kfree(intr);
 err0:
-	destroy_workqueue(sc->work_q);
 	uea_leaves(INS_TO_USBDEV(sc));
 	return -ENOMEM;
 }
@@ -2246,8 +2237,8 @@ static void uea_stop(struct uea_softc *sc)
 	kfree(sc->urb_int->transfer_buffer);
 	usb_free_urb(sc->urb_int);
 
-	/* stop any pending boot process, when no one can schedule work */
-	destroy_workqueue(sc->work_q);
+	/* flush the work item, when no one can schedule it */
+	flush_work_sync(&sc->task);
 
 	if (sc->dsp_firm)
 		release_firmware(sc->dsp_firm);
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 2c69654..b0585e6 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -10,7 +10,7 @@
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/mm.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/usb.h>
@@ -22,7 +22,7 @@
  */
 
 /* FIXME tune these based on pool statistics ... */
-static const size_t	pool_max [HCD_BUFFER_POOLS] = {
+static const size_t	pool_max[HCD_BUFFER_POOLS] = {
 	/* platforms without dma-friendly caches might need to
 	 * prevent cacheline sharing...
 	 */
@@ -51,7 +51,7 @@ static const size_t	pool_max [HCD_BUFFER_POOLS] = {
 int hcd_buffer_create(struct usb_hcd *hcd)
 {
 	char		name[16];
-	int 		i, size;
+	int		i, size;
 
 	if (!hcd->self.controller->dma_mask &&
 	    !(hcd->driver->flags & HCD_LOCAL_MEM))
@@ -64,7 +64,7 @@ int hcd_buffer_create(struct usb_hcd *hcd)
 		snprintf(name, sizeof name, "buffer-%d", size);
 		hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
 				size, size, 0);
-		if (!hcd->pool [i]) {
+		if (!hcd->pool[i]) {
 			hcd_buffer_destroy(hcd);
 			return -ENOMEM;
 		}
@@ -99,14 +99,14 @@ void hcd_buffer_destroy(struct usb_hcd *hcd)
  */
 
 void *hcd_buffer_alloc(
-	struct usb_bus 	*bus,
+	struct usb_bus		*bus,
 	size_t			size,
 	gfp_t			mem_flags,
 	dma_addr_t		*dma
 )
 {
 	struct usb_hcd		*hcd = bus_to_hcd(bus);
-	int 			i;
+	int			i;
 
 	/* some USB hosts just use PIO */
 	if (!bus->controller->dma_mask &&
@@ -116,21 +116,21 @@ void *hcd_buffer_alloc(
 	}
 
 	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
-		if (size <= pool_max [i])
-			return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
+		if (size <= pool_max[i])
+			return dma_pool_alloc(hcd->pool[i], mem_flags, dma);
 	}
 	return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
 }
 
 void hcd_buffer_free(
-	struct usb_bus 	*bus,
+	struct usb_bus		*bus,
 	size_t			size,
-	void 			*addr,
+	void			*addr,
 	dma_addr_t		dma
 )
 {
 	struct usb_hcd		*hcd = bus_to_hcd(bus);
-	int 			i;
+	int			i;
 
 	if (!addr)
 		return;
@@ -142,8 +142,8 @@ void hcd_buffer_free(
 	}
 
 	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
-		if (size <= pool_max [i]) {
-			dma_pool_free(hcd->pool [i], addr, dma);
+		if (size <= pool_max[i]) {
+			dma_pool_free(hcd->pool[i], addr, dma);
 			return;
 		}
 	}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index fca6172..38072e4 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1659,6 +1659,11 @@ static int usb_runtime_suspend(struct device *dev)
 		return -EAGAIN;
 
 	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+	/* The PM core reacts badly unless the return code is 0,
+	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
+	 */
+	if (status != 0)
+		return -EBUSY;
 	return status;
 }
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 64a035b..ce22f4a 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -192,13 +192,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
 			pci_name(dev));
 		retval = -ENODEV;
-		goto err1;
+		goto disable_pci;
 	}
 
 	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
 	if (!hcd) {
 		retval = -ENOMEM;
-		goto err1;
+		goto disable_pci;
 	}
 
 	if (driver->flags & HCD_MEMORY) {
@@ -209,13 +209,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 				driver->description)) {
 			dev_dbg(&dev->dev, "controller already in use\n");
 			retval = -EBUSY;
-			goto err2;
+			goto clear_companion;
 		}
 		hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 		if (hcd->regs == NULL) {
 			dev_dbg(&dev->dev, "error mapping memory\n");
 			retval = -EFAULT;
-			goto err3;
+			goto release_mem_region;
 		}
 
 	} else {
@@ -236,7 +236,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		if (region == PCI_ROM_RESOURCE) {
 			dev_dbg(&dev->dev, "no i/o regions available\n");
 			retval = -EBUSY;
-			goto err2;
+			goto clear_companion;
 		}
 	}
 
@@ -244,24 +244,24 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
-		goto err4;
+		goto unmap_registers;
 	set_hs_companion(dev, hcd);
 
 	if (pci_dev_run_wake(dev))
 		pm_runtime_put_noidle(&dev->dev);
 	return retval;
 
- err4:
+unmap_registers:
 	if (driver->flags & HCD_MEMORY) {
 		iounmap(hcd->regs);
- err3:
+release_mem_region:
 		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	} else
 		release_region(hcd->rsrc_start, hcd->rsrc_len);
- err2:
+clear_companion:
 	clear_hs_companion(dev, hcd);
 	usb_put_hcd(hcd);
- err1:
+disable_pci:
 	pci_disable_device(dev);
 	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
 	return retval;
@@ -363,11 +363,17 @@ static int check_root_hub_suspended(struct device *dev)
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
 
-	if (!(hcd->state == HC_STATE_SUSPENDED ||
-			hcd->state == HC_STATE_HALT)) {
+	if (HCD_RH_RUNNING(hcd)) {
 		dev_warn(dev, "Root hub is not suspended\n");
 		return -EBUSY;
 	}
+	if (hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		if (HCD_RH_RUNNING(hcd)) {
+			dev_warn(dev, "Secondary root hub is not suspended\n");
+			return -EBUSY;
+		}
+	}
 	return 0;
 }
 
@@ -386,17 +392,22 @@ static int suspend_common(struct device *dev, bool do_wakeup)
 	if (retval)
 		return retval;
 
-	if (hcd->driver->pci_suspend) {
+	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
 		/* Optimization: Don't suspend if a root-hub wakeup is
 		 * pending and it would cause the HCD to wake up anyway.
 		 */
 		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
 			return -EBUSY;
+		if (do_wakeup && hcd->shared_hcd &&
+				HCD_WAKEUP_PENDING(hcd->shared_hcd))
+			return -EBUSY;
 		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
 		suspend_report_result(hcd->driver->pci_suspend, retval);
 
 		/* Check again in case wakeup raced with pci_suspend */
-		if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
+				(retval == 0 && do_wakeup && hcd->shared_hcd &&
+				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
 			if (hcd->driver->pci_resume)
 				hcd->driver->pci_resume(hcd, false);
 			retval = -EBUSY;
@@ -427,7 +438,9 @@ static int resume_common(struct device *dev, int event)
 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
 	int			retval;
 
-	if (hcd->state != HC_STATE_SUSPENDED) {
+	if (HCD_RH_RUNNING(hcd) ||
+			(hcd->shared_hcd &&
+			 HCD_RH_RUNNING(hcd->shared_hcd))) {
 		dev_dbg(dev, "can't resume, not suspended!\n");
 		return 0;
 	}
@@ -441,8 +454,10 @@ static int resume_common(struct device *dev, int event)
 	pci_set_master(pci_dev);
 
 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+	if (hcd->shared_hcd)
+		clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
 
-	if (hcd->driver->pci_resume) {
+	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
 		if (event != PM_EVENT_AUTO_RESUME)
 			wait_for_companions(pci_dev, hcd);
 
@@ -450,6 +465,8 @@ static int resume_common(struct device *dev, int event)
 				event == PM_EVENT_RESTORE);
 		if (retval) {
 			dev_err(dev, "PCI post-resume error %d!\n", retval);
+			if (hcd->shared_hcd)
+				usb_hc_died(hcd->shared_hcd);
 			usb_hc_died(hcd);
 		}
 	}
@@ -475,10 +492,11 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
-	/* If the root hub is HALTed rather than SUSPENDed,
-	 * disallow remote wakeup.
+	/* If the root hub is dead rather than suspended, disallow remote
+	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
+	 * dying, so we only need to check the primary roothub.
 	 */
-	if (hcd->state == HC_STATE_HALT)
+	if (HCD_DEAD(hcd))
 		device_set_wakeup_enable(dev, 0);
 	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index e935f71..02b4dbf 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -297,7 +297,7 @@ static const u8 ss_rh_config_descriptor[] = {
 	/* one configuration */
 	0x09,       /*  __u8  bLength; */
 	0x02,       /*  __u8  bDescriptorType; Configuration */
-	0x19, 0x00, /*  __le16 wTotalLength; FIXME */
+	0x1f, 0x00, /*  __le16 wTotalLength; */
 	0x01,       /*  __u8  bNumInterfaces; (1) */
 	0x01,       /*  __u8  bConfigurationValue; */
 	0x00,       /*  __u8  iConfiguration; */
@@ -327,11 +327,14 @@ static const u8 ss_rh_config_descriptor[] = {
 		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
 		     * see hub.c:hub_configure() for details. */
 	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
-	0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
-	/*
-	 * All 3.0 hubs should have an endpoint companion descriptor,
-	 * but we're ignoring that for now.  FIXME?
-	 */
+	0x0c,       /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+
+	/* one SuperSpeed endpoint companion descriptor */
+	0x06,        /* __u8 ss_bLength */
+	0x30,        /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
+	0x00,        /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
+	0x00,        /* __u8 ss_bmAttributes; 1 packet per service interval */
+	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -504,7 +507,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 		switch (wValue & 0xff00) {
 		case USB_DT_DEVICE << 8:
-			switch (hcd->driver->flags & HCD_MASK) {
+			switch (hcd->speed) {
 			case HCD_USB3:
 				bufp = usb3_rh_dev_descriptor;
 				break;
@@ -522,7 +525,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				patch_protocol = 1;
 			break;
 		case USB_DT_CONFIG << 8:
-			switch (hcd->driver->flags & HCD_MASK) {
+			switch (hcd->speed) {
 			case HCD_USB3:
 				bufp = ss_rh_config_descriptor;
 				len = sizeof ss_rh_config_descriptor;
@@ -983,7 +986,7 @@ static int register_root_hub(struct usb_hcd *hcd)
 		spin_unlock_irq (&hcd_root_hub_lock);
 
 		/* Did the HC die before the root hub was registered? */
-		if (hcd->state == HC_STATE_HALT)
+		if (HCD_DEAD(hcd) || hcd->state == HC_STATE_HALT)
 			usb_hc_died (hcd);	/* This time clean up */
 	}
 
@@ -1089,13 +1092,10 @@ int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
 	 * Check the host controller's state and add the URB to the
 	 * endpoint's queue.
 	 */
-	switch (hcd->state) {
-	case HC_STATE_RUNNING:
-	case HC_STATE_RESUMING:
+	if (HCD_RH_RUNNING(hcd)) {
 		urb->unlinked = 0;
 		list_add_tail(&urb->urb_list, &urb->ep->urb_list);
-		break;
-	default:
+	} else {
 		rc = -ESHUTDOWN;
 		goto done;
 	}
@@ -1153,6 +1153,8 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
 		dev_warn(hcd->self.controller, "Unlink after no-IRQ?  "
 			"Controller is probably using the wrong IRQ.\n");
 		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+		if (hcd->shared_hcd)
+			set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
 	}
 
 	return 0;
@@ -1262,7 +1264,7 @@ static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
 	*dma_handle = 0;
 }
 
-void unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
+void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
 {
 	if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
 		dma_unmap_single(hcd->self.controller,
@@ -1279,13 +1281,21 @@ void unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
 	/* Make it safe to call this routine more than once */
 	urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
 }
-EXPORT_SYMBOL_GPL(unmap_urb_setup_for_dma);
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
 
-void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	if (hcd->driver->unmap_urb_for_dma)
+		hcd->driver->unmap_urb_for_dma(hcd, urb);
+	else
+		usb_hcd_unmap_urb_for_dma(hcd, urb);
+}
+
+void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
 {
 	enum dma_data_direction dir;
 
-	unmap_urb_setup_for_dma(hcd, urb);
+	usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
 
 	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 	if (urb->transfer_flags & URB_DMA_MAP_SG)
@@ -1314,11 +1324,20 @@ void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
 	urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
 			URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
 }
-EXPORT_SYMBOL_GPL(unmap_urb_for_dma);
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
 
 static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 			   gfp_t mem_flags)
 {
+	if (hcd->driver->map_urb_for_dma)
+		return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
+	else
+		return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
 	enum dma_data_direction dir;
 	int ret = 0;
 
@@ -1410,10 +1429,11 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 		}
 		if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
 				URB_SETUP_MAP_LOCAL)))
-			unmap_urb_for_dma(hcd, urb);
+			usb_hcd_unmap_urb_for_dma(hcd, urb);
 	}
 	return ret;
 }
+EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1913,7 +1933,7 @@ int usb_hcd_get_frame_number (struct usb_device *udev)
 {
 	struct usb_hcd	*hcd = bus_to_hcd(udev->bus);
 
-	if (!HC_IS_RUNNING (hcd->state))
+	if (!HCD_RH_RUNNING(hcd))
 		return -ESHUTDOWN;
 	return hcd->driver->get_frame_number (hcd);
 }
@@ -1930,9 +1950,15 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 
 	dev_dbg(&rhdev->dev, "bus %s%s\n",
 			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
+		return 0;
+	}
+
 	if (!hcd->driver->bus_suspend) {
 		status = -ENOENT;
 	} else {
+		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
 		hcd->state = HC_STATE_QUIESCING;
 		status = hcd->driver->bus_suspend(hcd);
 	}
@@ -1940,7 +1966,12 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
 		hcd->state = HC_STATE_SUSPENDED;
 	} else {
-		hcd->state = old_state;
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = old_state;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
 		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
 				"suspend", status);
 	}
@@ -1955,9 +1986,13 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	dev_dbg(&rhdev->dev, "usb %s%s\n",
 			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
+		return 0;
+	}
 	if (!hcd->driver->bus_resume)
 		return -ENOENT;
-	if (hcd->state == HC_STATE_RUNNING)
+	if (HCD_RH_RUNNING(hcd))
 		return 0;
 
 	hcd->state = HC_STATE_RESUMING;
@@ -1966,10 +2001,15 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	if (status == 0) {
 		/* TRSMRCY = 10 msec */
 		msleep(10);
-		usb_set_device_state(rhdev, rhdev->actconfig
-				? USB_STATE_CONFIGURED
-				: USB_STATE_ADDRESS);
-		hcd->state = HC_STATE_RUNNING;
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			usb_set_device_state(rhdev, rhdev->actconfig
+					? USB_STATE_CONFIGURED
+					: USB_STATE_ADDRESS);
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = HC_STATE_RUNNING;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
 	} else {
 		hcd->state = old_state;
 		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
@@ -2080,12 +2120,14 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 	 */
 	local_irq_save(flags);
 
-	if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) {
+	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
 		rc = IRQ_NONE;
 	} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
 		rc = IRQ_NONE;
 	} else {
 		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+		if (hcd->shared_hcd)
+			set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
 
 		if (unlikely(hcd->state == HC_STATE_HALT))
 			usb_hc_died(hcd);
@@ -2105,7 +2147,9 @@ EXPORT_SYMBOL_GPL(usb_hcd_irq);
  *
  * This is called by bus glue to report a USB host controller that died
  * while operations may still have been pending.  It's called automatically
- * by the PCI glue, so only glue for non-PCI busses should need to call it. 
+ * by the PCI glue, so only glue for non-PCI busses should need to call it.
+ *
+ * Only call this function with the primary HCD.
  */
 void usb_hc_died (struct usb_hcd *hcd)
 {
@@ -2114,6 +2158,8 @@ void usb_hc_died (struct usb_hcd *hcd)
 	dev_err (hcd->self.controller, "HC died; cleaning up\n");
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	set_bit(HCD_FLAG_DEAD, &hcd->flags);
 	if (hcd->rh_registered) {
 		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
@@ -2122,17 +2168,31 @@ void usb_hc_died (struct usb_hcd *hcd)
 				USB_STATE_NOTATTACHED);
 		usb_kick_khubd (hcd->self.root_hub);
 	}
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		if (hcd->rh_registered) {
+			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+			/* make khubd clean up old urbs and devices */
+			usb_set_device_state(hcd->self.root_hub,
+					USB_STATE_NOTATTACHED);
+			usb_kick_khubd(hcd->self.root_hub);
+		}
+	}
 	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+	/* Make sure that the other roothub is also deallocated. */
 }
 EXPORT_SYMBOL_GPL (usb_hc_died);
 
 /*-------------------------------------------------------------------------*/
 
 /**
- * usb_create_hcd - create and initialize an HCD structure
+ * usb_create_shared_hcd - create and initialize an HCD structure
  * @driver: HC driver that will use this hcd
  * @dev: device for this HC, stored in hcd->self.controller
  * @bus_name: value to store in hcd->self.bus_name
+ * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
+ *              PCI device.  Only allocate certain resources for the primary HCD
  * Context: !in_interrupt()
  *
  * Allocate a struct usb_hcd, with extra space at the end for the
@@ -2141,8 +2201,9 @@ EXPORT_SYMBOL_GPL (usb_hc_died);
  *
  * If memory is unavailable, returns NULL.
  */
-struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
-		struct device *dev, const char *bus_name)
+struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *primary_hcd)
 {
 	struct usb_hcd *hcd;
 
@@ -2151,7 +2212,24 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 		dev_dbg (dev, "hcd alloc failed\n");
 		return NULL;
 	}
-	dev_set_drvdata(dev, hcd);
+	if (primary_hcd == NULL) {
+		hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
+				GFP_KERNEL);
+		if (!hcd->bandwidth_mutex) {
+			kfree(hcd);
+			dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
+			return NULL;
+		}
+		mutex_init(hcd->bandwidth_mutex);
+		dev_set_drvdata(dev, hcd);
+	} else {
+		hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
+		hcd->primary_hcd = primary_hcd;
+		primary_hcd->primary_hcd = primary_hcd;
+		hcd->shared_hcd = primary_hcd;
+		primary_hcd->shared_hcd = hcd;
+	}
+
 	kref_init(&hcd->kref);
 
 	usb_bus_init(&hcd->self);
@@ -2165,19 +2243,53 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 #ifdef CONFIG_USB_SUSPEND
 	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
 #endif
-	mutex_init(&hcd->bandwidth_mutex);
 
 	hcd->driver = driver;
+	hcd->speed = driver->flags & HCD_MASK;
 	hcd->product_desc = (driver->product_desc) ? driver->product_desc :
 			"USB Host Controller";
 	return hcd;
 }
+EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
+
+/**
+ * usb_create_hcd - create and initialize an HCD structure
+ * @driver: HC driver that will use this hcd
+ * @dev: device for this HC, stored in hcd->self.controller
+ * @bus_name: value to store in hcd->self.bus_name
+ * Context: !in_interrupt()
+ *
+ * Allocate a struct usb_hcd, with extra space at the end for the
+ * HC driver's private data.  Initialize the generic members of the
+ * hcd structure.
+ *
+ * If memory is unavailable, returns NULL.
+ */
+struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name)
+{
+	return usb_create_shared_hcd(driver, dev, bus_name, NULL);
+}
 EXPORT_SYMBOL_GPL(usb_create_hcd);
 
+/*
+ * Roothubs that share one PCI device must also share the bandwidth mutex.
+ * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
+ * deallocated.
+ *
+ * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
+ * freed.  When hcd_release() is called for the non-primary HCD, set the
+ * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be
+ * freed shortly).
+ */
 static void hcd_release (struct kref *kref)
 {
 	struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
 
+	if (usb_hcd_is_primary_hcd(hcd))
+		kfree(hcd->bandwidth_mutex);
+	else
+		hcd->shared_hcd->shared_hcd = NULL;
 	kfree(hcd);
 }
 
@@ -2196,6 +2308,54 @@ void usb_put_hcd (struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(usb_put_hcd);
 
+int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
+{
+	if (!hcd->primary_hcd)
+		return 1;
+	return hcd == hcd->primary_hcd;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+
+static int usb_hcd_request_irqs(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags)
+{
+	int retval;
+
+	if (hcd->driver->irq) {
+
+		/* IRQF_DISABLED doesn't work as advertised when used together
+		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+		 * interrupts we can remove it here.
+		 */
+		if (irqflags & IRQF_SHARED)
+			irqflags &= ~IRQF_DISABLED;
+
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+				hcd->driver->description, hcd->self.busnum);
+		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
+				hcd->irq_descr, hcd);
+		if (retval != 0) {
+			dev_err(hcd->self.controller,
+					"request interrupt %d failed\n",
+					irqnum);
+			return retval;
+		}
+		hcd->irq = irqnum;
+		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
+				(hcd->driver->flags & HCD_MEMORY) ?
+					"io mem" : "io base",
+					(unsigned long long)hcd->rsrc_start);
+	} else {
+		hcd->irq = -1;
+		if (hcd->rsrc_start)
+			dev_info(hcd->self.controller, "%s 0x%08llx\n",
+					(hcd->driver->flags & HCD_MEMORY) ?
+					"io mem" : "io base",
+					(unsigned long long)hcd->rsrc_start);
+	}
+	return 0;
+}
+
 /**
  * usb_add_hcd - finish generic HCD structure initialization and register
  * @hcd: the usb_hcd structure to initialize
@@ -2236,7 +2396,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 	hcd->self.root_hub = rhdev;
 
-	switch (hcd->driver->flags & HCD_MASK) {
+	switch (hcd->speed) {
 	case HCD_USB11:
 		rhdev->speed = USB_SPEED_FULL;
 		break;
@@ -2256,6 +2416,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	 */
 	device_init_wakeup(&rhdev->dev, 1);
 
+	/* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
+	 * registered.  But since the controller can die at any time,
+	 * let's initialize the flag before touching the hardware.
+	 */
+	set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
@@ -2271,38 +2437,15 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
 	/* enable irqs just before we start the controller */
-	if (hcd->driver->irq) {
-
-		/* IRQF_DISABLED doesn't work as advertised when used together
-		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
-		 * interrupts we can remove it here.
-		 */
-		if (irqflags & IRQF_SHARED)
-			irqflags &= ~IRQF_DISABLED;
-
-		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
-				hcd->driver->description, hcd->self.busnum);
-		if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
-				hcd->irq_descr, hcd)) != 0) {
-			dev_err(hcd->self.controller,
-					"request interrupt %d failed\n", irqnum);
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
+		if (retval)
 			goto err_request_irq;
-		}
-		hcd->irq = irqnum;
-		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
-				(hcd->driver->flags & HCD_MEMORY) ?
-					"io mem" : "io base",
-					(unsigned long long)hcd->rsrc_start);
-	} else {
-		hcd->irq = -1;
-		if (hcd->rsrc_start)
-			dev_info(hcd->self.controller, "%s 0x%08llx\n",
-					(hcd->driver->flags & HCD_MEMORY) ?
-					"io mem" : "io base",
-					(unsigned long long)hcd->rsrc_start);
 	}
 
-	if ((retval = hcd->driver->start(hcd)) < 0) {
+	hcd->state = HC_STATE_RUNNING;
+	retval = hcd->driver->start(hcd);
+	if (retval < 0) {
 		dev_err(hcd->self.controller, "startup error %d\n", retval);
 		goto err_hcd_driver_start;
 	}
@@ -2323,6 +2466,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	return retval;
 
 error_create_attr_group:
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
 	if (HC_IS_RUNNING(hcd->state))
 		hcd->state = HC_STATE_QUIESCING;
 	spin_lock_irq(&hcd_root_hub_lock);
@@ -2344,7 +2488,7 @@ err_register_root_hub:
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	del_timer_sync(&hcd->rh_timer);
 err_hcd_driver_start:
-	if (hcd->irq >= 0)
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->irq >= 0)
 		free_irq(irqnum, hcd);
 err_request_irq:
 err_hcd_driver_setup:
@@ -2375,6 +2519,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	usb_get_dev(rhdev);
 	sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
 
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
 	if (HC_IS_RUNNING (hcd->state))
 		hcd->state = HC_STATE_QUIESCING;
 
@@ -2407,8 +2552,10 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	del_timer_sync(&hcd->rh_timer);
 
-	if (hcd->irq >= 0)
-		free_irq(hcd->irq, hcd);
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		if (hcd->irq >= 0)
+			free_irq(hcd->irq, hcd);
+	}
 
 	usb_put_dev(hcd->self.root_hub);
 	usb_deregister_bus(&hcd->self);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 19d3435..564eaa5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -82,6 +82,10 @@ struct usb_hub {
 	void			**port_owners;
 };
 
+static inline int hub_is_superspeed(struct usb_device *hdev)
+{
+	return (hdev->descriptor.bDeviceProtocol == 3);
+}
 
 /* Protect struct usb_device->state and ->children members
  * Note: Both are also protected by ->dev.sem, except that ->state can
@@ -151,14 +155,14 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
-static inline char *portspeed(int portstatus)
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
+	if (hub_is_superspeed(hub->hdev))
+		return "5.0 Gb/s";
 	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
     		return "480 Mb/s";
 	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 		return "1.5 Mb/s";
-	else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
-		return "5.0 Gb/s";
 	else
 		return "12 Mb/s";
 }
@@ -172,14 +176,23 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
 }
 
 /* USB 2.0 spec Section 11.24.4.5 */
-static int get_hub_descriptor(struct usb_device *hdev, void *data, int size)
+static int get_hub_descriptor(struct usb_device *hdev, void *data)
 {
-	int i, ret;
+	int i, ret, size;
+	unsigned dtype;
+
+	if (hub_is_superspeed(hdev)) {
+		dtype = USB_DT_SS_HUB;
+		size = USB_DT_SS_HUB_SIZE;
+	} else {
+		dtype = USB_DT_HUB;
+		size = sizeof(struct usb_hub_descriptor);
+	}
 
 	for (i = 0; i < 3; i++) {
 		ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
-			USB_DT_HUB << 8, 0, data, size,
+			dtype << 8, 0, data, size,
 			USB_CTRL_GET_TIMEOUT);
 		if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
 			return ret;
@@ -365,6 +378,16 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 	} else {
 		*status = le16_to_cpu(hub->status->port.wPortStatus);
 		*change = le16_to_cpu(hub->status->port.wPortChange);
+
+		if ((hub->hdev->parent != NULL) &&
+				hub_is_superspeed(hub->hdev)) {
+			/* Translate the USB 3 port status */
+			u16 tmp = *status & USB_SS_PORT_STAT_MASK;
+			if (*status & USB_SS_PORT_STAT_POWER)
+				tmp |= USB_PORT_STAT_POWER;
+			*status = tmp;
+		}
+
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -607,7 +630,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 	if (hdev->children[port1-1] && set_state)
 		usb_set_device_state(hdev->children[port1-1],
 				USB_STATE_NOTATTACHED);
-	if (!hub->error)
+	if (!hub->error && !hub_is_superspeed(hub->hdev))
 		ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
 	if (ret)
 		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
@@ -616,7 +639,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 }
 
 /*
- * Disable a port and mark a logical connnect-change event, so that some
+ * Disable a port and mark a logical connect-change event, so that some
  * time later khubd will disconnect() any existing usb_device on the port
  * and will re-enumerate if there actually is a device attached.
  */
@@ -769,12 +792,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			 * USB3 protocol ports will automatically transition
 			 * to Enabled state when detect an USB3.0 device attach.
 			 * Do not disable USB3 protocol ports.
-			 * FIXME: USB3 root hub and external hubs are treated
-			 * differently here.
 			 */
-			if (hdev->descriptor.bDeviceProtocol != 3 ||
-			    (!hdev->parent &&
-			     !(portstatus & USB_PORT_STAT_SUPER_SPEED))) {
+			if (!hub_is_superspeed(hdev)) {
 				clear_port_feature(hdev, port1,
 						   USB_PORT_FEAT_ENABLE);
 				portstatus &= ~USB_PORT_STAT_ENABLE;
@@ -795,6 +814,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
 		}
+		if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		}
 
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
@@ -964,12 +988,23 @@ static int hub_configure(struct usb_hub *hub,
 		goto fail;
 	}
 
+	if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
+		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+				HUB_SET_DEPTH, USB_RT_HUB,
+				hdev->level - 1, 0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+
+		if (ret < 0) {
+			message = "can't set hub depth";
+			goto fail;
+		}
+	}
+
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
 	 * but the hub can/will return fewer bytes here.
 	 */
-	ret = get_hub_descriptor(hdev, hub->descriptor,
-			sizeof(*hub->descriptor));
+	ret = get_hub_descriptor(hdev, hub->descriptor);
 	if (ret < 0) {
 		message = "can't read hub descriptor";
 		goto fail;
@@ -991,12 +1026,14 @@ static int hub_configure(struct usb_hub *hub,
 
 	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
 
-	if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
+	/* FIXME for USB 3.0, skip for now */
+	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
+			!(hub_is_superspeed(hdev))) {
 		int	i;
 		char	portstr [USB_MAXCHILDREN + 1];
 
 		for (i = 0; i < hdev->maxchild; i++)
-			portstr[i] = hub->descriptor->DeviceRemovable
+			portstr[i] = hub->descriptor->u.hs.DeviceRemovable
 				    [((i + 1) / 8)] & (1 << ((i + 1) % 8))
 				? 'F' : 'R';
 		portstr[hdev->maxchild] = 0;
@@ -1253,8 +1290,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
-	/* Hubs have proper suspend/resume support */
-	usb_enable_autosuspend(hdev);
+	/* Hubs have proper suspend/resume support.  USB 3.0 device suspend is
+	 * different from USB 2.0/1.1 device suspend, and unfortunately we
+	 * don't support it yet.  So leave autosuspend disabled for USB 3.0
+	 * external hubs for now.  Enable autosuspend for USB 3.0 roothubs,
+	 * since that isn't a "real" hub.
+	 */
+	if (!hub_is_superspeed(hdev) || !hdev->parent)
+		usb_enable_autosuspend(hdev);
 
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
@@ -1501,6 +1544,13 @@ void usb_set_device_state(struct usb_device *udev,
 EXPORT_SYMBOL_GPL(usb_set_device_state);
 
 /*
+ * Choose a device number.
+ *
+ * Device numbers are used as filenames in usbfs.  On USB-1.1 and
+ * USB-2.0 buses they are also used as device addresses, however on
+ * USB-3.0 buses the address is assigned by the controller hardware
+ * and it usually is not the same as the device number.
+ *
  * WUSB devices are simple: they have no hubs behind, so the mapping
  * device <-> virtual port number becomes 1:1. Why? to simplify the
  * life of the device connection logic in
@@ -1522,7 +1572,7 @@ EXPORT_SYMBOL_GPL(usb_set_device_state);
  * the HCD must setup data structures before issuing a set address
  * command to the hardware.
  */
-static void choose_address(struct usb_device *udev)
+static void choose_devnum(struct usb_device *udev)
 {
 	int		devnum;
 	struct usb_bus	*bus = udev->bus;
@@ -1547,7 +1597,7 @@ static void choose_address(struct usb_device *udev)
 	}
 }
 
-static void release_address(struct usb_device *udev)
+static void release_devnum(struct usb_device *udev)
 {
 	if (udev->devnum > 0) {
 		clear_bit(udev->devnum, udev->bus->devmap.devicemap);
@@ -1555,7 +1605,7 @@ static void release_address(struct usb_device *udev)
 	}
 }
 
-static void update_address(struct usb_device *udev, int devnum)
+static void update_devnum(struct usb_device *udev, int devnum)
 {
 	/* The address for a WUSB device is managed by wusbcore. */
 	if (!udev->wusb)
@@ -1602,7 +1652,8 @@ void usb_disconnect(struct usb_device **pdev)
 	 * this quiesces everyting except pending urbs.
 	 */
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-	dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
+	dev_info(&udev->dev, "USB disconnect, device number %d\n",
+			udev->devnum);
 
 	usb_lock_device(udev);
 
@@ -1632,7 +1683,7 @@ void usb_disconnect(struct usb_device **pdev)
 	/* Free the device number and delete the parent's children[]
 	 * (or root_hub) pointer.
 	 */
-	release_address(udev);
+	release_devnum(udev);
 
 	/* Avoid races with recursively_mark_NOTATTACHED() */
 	spin_lock_irq(&device_state_lock);
@@ -2017,7 +2068,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
 				udev->speed = USB_SPEED_WIRELESS;
-			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+			else if (hub_is_superspeed(hub->hdev))
 				udev->speed = USB_SPEED_SUPER;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
@@ -2073,7 +2124,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		case 0:
 			/* TRSTRCY = 10 ms; plus some extra */
 			msleep(10 + 40);
-			update_address(udev, 0);
+			update_devnum(udev, 0);
 			if (hcd->driver->reset_device) {
 				status = hcd->driver->reset_device(hcd, udev);
 				if (status < 0) {
@@ -2636,7 +2687,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 				USB_REQ_SET_ADDRESS, 0, devnum, 0,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
 	if (retval == 0) {
-		update_address(udev, devnum);
+		update_devnum(udev, devnum);
 		/* Device now using proper address. */
 		usb_set_device_state(udev, USB_STATE_ADDRESS);
 		usb_ep0_reinit(udev);
@@ -2741,9 +2792,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	}
 	if (udev->speed != USB_SPEED_SUPER)
 		dev_info(&udev->dev,
-				"%s %s speed %sUSB device using %s and address %d\n",
+				"%s %s speed %sUSB device number %d using %s\n",
 				(udev->config) ? "reset" : "new", speed, type,
-				udev->bus->controller->driver->name, devnum);
+				devnum, udev->bus->controller->driver->name);
 
 	/* Set up TT records, if needed  */
 	if (hdev->tt) {
@@ -2773,10 +2824,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * value.
 	 */
 	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
-		/*
-		 * An xHCI controller cannot send any packets to a device until
-		 * a set address command successfully completes.
-		 */
 		if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
 			struct usb_device_descriptor *buf;
 			int r = 0;
@@ -2859,9 +2906,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 			if (udev->speed == USB_SPEED_SUPER) {
 				devnum = udev->devnum;
 				dev_info(&udev->dev,
-						"%s SuperSpeed USB device using %s and address %d\n",
+						"%s SuperSpeed USB device number %d using %s\n",
 						(udev->config) ? "reset" : "new",
-						udev->bus->controller->driver->name, devnum);
+						devnum, udev->bus->controller->driver->name);
 			}
 
 			/* cope with hardware quirkiness:
@@ -2924,7 +2971,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 fail:
 	if (retval) {
 		hub_port_disable(hub, port1, 0);
-		update_address(udev, devnum);	/* for disconnect processing */
+		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
 	mutex_unlock(&usb_address0_mutex);
 	return retval;
@@ -3015,7 +3062,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 	dev_dbg (hub_dev,
 		"port %d, status %04x, change %04x, %s\n",
-		port1, portstatus, portchange, portspeed (portstatus));
+		port1, portstatus, portchange, portspeed(hub, portstatus));
 
 	if (hub->has_indicators) {
 		set_port_led(hub, port1, HUB_LED_AUTO);
@@ -3116,32 +3163,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		udev->level = hdev->level + 1;
 		udev->wusb = hub_is_wusb(hub);
 
-		/*
-		 * USB 3.0 devices are reset automatically before the connect
-		 * port status change appears, and the root hub port status
-		 * shows the correct speed.  We also get port change
-		 * notifications for USB 3.0 devices from the USB 3.0 portion of
-		 * an external USB 3.0 hub, but this isn't handled correctly yet
-		 * FIXME.
-		 */
-
-		if (!(hcd->driver->flags & HCD_USB3))
-			udev->speed = USB_SPEED_UNKNOWN;
-		else if ((hdev->parent == NULL) &&
-				(portstatus & USB_PORT_STAT_SUPER_SPEED))
+		/* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+		if (hub_is_superspeed(hub->hdev))
 			udev->speed = USB_SPEED_SUPER;
 		else
 			udev->speed = USB_SPEED_UNKNOWN;
 
-		/*
-		 * Set the address.
-		 * Note xHCI needs to issue an address device command later
-		 * in the hub_port_init sequence for SS/HS/FS/LS devices,
-		 * and xHC will assign an address to the device. But use
-		 * kernel assigned address here, to avoid any address conflict
-		 * issue.
-		 */
-		choose_address(udev);
+		choose_devnum(udev);
 		if (udev->devnum <= 0) {
 			status = -ENOTCONN;	/* Don't retry */
 			goto loop;
@@ -3233,7 +3261,7 @@ loop_disable:
 		hub_port_disable(hub, port1, 1);
 loop:
 		usb_ep0_reinit(udev);
-		release_address(udev);
+		release_devnum(udev);
 		hub_free_dev(udev);
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
@@ -3410,12 +3438,19 @@ static void hub_events(void)
 			}
 			
 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
-				dev_err (hub_dev,
-					"over-current change on port %d\n",
-					i);
+				u16 status = 0;
+				u16 unused;
+
+				dev_dbg(hub_dev, "over-current change on port "
+					"%d\n", i);
 				clear_port_feature(hdev, i,
 					USB_PORT_FEAT_C_OVER_CURRENT);
+				msleep(100);	/* Cool down */
 				hub_power_on(hub, true);
+				hub_port_status(hub, i, &status, &unused);
+				if (status & USB_PORT_STAT_OVERCURRENT)
+					dev_err(hub_dev, "over-current "
+						"condition on port %d\n", i);
 			}
 
 			if (portchange & USB_PORT_STAT_C_RESET) {
@@ -3425,6 +3460,25 @@ static void hub_events(void)
 				clear_port_feature(hdev, i,
 					USB_PORT_FEAT_C_RESET);
 			}
+			if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+					hub_is_superspeed(hub->hdev)) {
+				dev_dbg(hub_dev,
+					"warm reset change on port %d\n",
+					i);
+				clear_port_feature(hdev, i,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			}
+			if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+				clear_port_feature(hub->hdev, i,
+						USB_PORT_FEAT_C_PORT_LINK_STATE);
+			}
+			if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
+				dev_warn(hub_dev,
+					"config error on port %d\n",
+					i);
+				clear_port_feature(hub->hdev, i,
+						USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
+			}
 
 			if (connect_change)
 				hub_port_connect_change(hub, i,
@@ -3447,10 +3501,17 @@ static void hub_events(void)
 					hub->limited_power = 0;
 			}
 			if (hubchange & HUB_CHANGE_OVERCURRENT) {
-				dev_dbg (hub_dev, "overcurrent change\n");
-				msleep(500);	/* Cool down */
+				u16 status = 0;
+				u16 unused;
+
+				dev_dbg(hub_dev, "over-current change\n");
 				clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+				msleep(500);	/* Cool down */
                         	hub_power_on(hub, true);
+				hub_hub_status(hub, &status, &unused);
+				if (status & HUB_STATUS_OVERCURRENT)
+					dev_err(hub_dev, "over-current "
+						"condition\n");
 			}
 		}
 
@@ -3699,13 +3760,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (!udev->actconfig)
 		goto done;
 
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
 	if (ret < 0) {
 		dev_warn(&udev->dev,
 				"Busted HC?  Not enough HCD resources for "
 				"old configuration.\n");
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
 	}
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
@@ -3716,10 +3777,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		dev_err(&udev->dev,
 			"can't restore configuration #%d (error=%d)\n",
 			udev->actconfig->desc.bConfigurationValue, ret);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
   	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
 	/* Put interfaces back into the same altsettings as before.
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 8324874..5701e85 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1284,12 +1284,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	/* Make sure we have enough bandwidth for this alternate interface.
 	 * Remove the current alt setting and add the new alt setting.
 	 */
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
 	if (ret < 0) {
 		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
 				alternate);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
 
@@ -1311,10 +1311,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	} else if (ret < 0) {
 		/* Re-instate the old alt setting */
 		usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* FIXME drivers shouldn't need to replicate/bugfix the logic here
 	 * when they implement async or easily-killable versions of this or
@@ -1413,7 +1413,7 @@ int usb_reset_configuration(struct usb_device *dev)
 
 	config = dev->actconfig;
 	retval = 0;
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	/* Make sure we have enough bandwidth for each alternate setting 0 */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
@@ -1442,7 +1442,7 @@ reset_old_alts:
 				usb_hcd_alloc_bandwidth(dev, NULL,
 						alt, intf->cur_altsetting);
 		}
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
 	}
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1451,7 +1451,7 @@ reset_old_alts:
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
 	if (retval < 0)
 		goto reset_old_alts;
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
@@ -1739,10 +1739,10 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
@@ -1761,11 +1761,11 @@ free_interfaces:
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_set_device_state(dev, USB_STATE_CONFIGURED);
 
 	/* Initialize the new interface structures and the
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c14fc08..ae334b0 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -366,7 +366,16 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	if (xfertype == USB_ENDPOINT_XFER_ISOC) {
 		int	n, len;
 
-		/* FIXME SuperSpeed isoc endpoints have up to 16 bursts */
+		/* SuperSpeed isoc endpoints have up to 16 bursts of up to
+		 * 3 packets each
+		 */
+		if (dev->speed == USB_SPEED_SUPER) {
+			int     burst = 1 + ep->ss_ep_comp.bMaxBurst;
+			int     mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
+			max *= burst;
+			max *= mult;
+		}
+
 		/* "high bandwidth" mode, 1-3 packets/uframe? */
 		if (dev->speed == USB_SPEED_HIGH) {
 			int	mult = 1 + ((max >> 11) & 0x03);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index b975450..a9cf484 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -122,6 +122,19 @@ static inline int is_usb_device_driver(struct device_driver *drv)
 			for_devices;
 }
 
+/* translate USB error codes to codes user space understands */
+static inline int usb_translate_errors(int error_code)
+{
+	switch (error_code) {
+	case 0:
+	case -ENOMEM:
+	case -ENODEV:
+		return error_code;
+	default:
+		return -EIO;
+	}
+}
+
 
 /* for labeling diagnostics */
 extern const char *usbcore_name;
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 94ecdbc..0bc06e2 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -601,7 +601,7 @@ try_again:
 		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
 		goto err;
 	}
-	dbgp_printk("small write doned\n");
+	dbgp_printk("small write done\n");
 	dbgp_not_safe = 0;
 
 	return 0;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index d500996..bfde50e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -176,6 +176,18 @@ config USB_FSL_USB2
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_FUSB300
+	boolean "Faraday FUSB300 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
+	help
+	   Faraday usb device controller FUSB300 driver
+
+config USB_FUSB300
+	tristate
+	depends on USB_GADGET_FUSB300
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_LH7A40X
 	boolean "LH7A40X"
 	depends on ARCH_LH7A40X
@@ -540,7 +552,7 @@ config USB_GADGET_CI13XXX_MSM
 	boolean "MIPS USB CI13xxx for MSM"
 	depends on ARCH_MSM
 	select USB_GADGET_DUALSPEED
-	select USB_MSM_OTG_72K
+	select USB_MSM_OTG
 	help
 	  MSM SoC has chipidea USB controller.  This driver uses
 	  ci13xxx_udc core.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 55f5e8a..305286e 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
+obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 
 #
 # USB gadget drivers
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bdec36a..bb8ddf0 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1798,8 +1798,10 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	}
 
 	retval = device_register(&udc->gadget.dev);
-	if (retval < 0)
+	if (retval < 0) {
+		put_device(&udc->gadget.dev);
 		goto fail0b;
+	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
 	clk_enable(udc->iclk);
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index a1c67ae..e09178b 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -435,20 +435,6 @@ static int hw_ep_get_halt(int num, int dir)
 }
 
 /**
- * hw_ep_is_primed: test if endpoint is primed (execute without interruption)
- * @num:   endpoint number
- * @dir:   endpoint direction
- *
- * This function returns true if endpoint primed
- */
-static int hw_ep_is_primed(int num, int dir)
-{
-	u32 reg = hw_cread(CAP_ENDPTPRIME, ~0) | hw_cread(CAP_ENDPTSTAT, ~0);
-
-	return test_bit(hw_ep_bit(num, dir), (void *)&reg);
-}
-
-/**
  * hw_test_and_clear_setup_status: test & clear setup status (execute without
  *                                 interruption)
  * @n: bit number (endpoint)
@@ -472,10 +458,6 @@ static int hw_ep_prime(int num, int dir, int is_ctrl)
 {
 	int n = hw_ep_bit(num, dir);
 
-	/* the caller should flush first */
-	if (hw_ep_is_primed(num, dir))
-		return -EBUSY;
-
 	if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
@@ -1434,6 +1416,8 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep)
 static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 {
 	unsigned i;
+	int ret = 0;
+	unsigned length = mReq->req.length;
 
 	trace("%p, %p", mEp, mReq);
 
@@ -1441,53 +1425,91 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	if (mReq->req.status == -EALREADY)
 		return -EALREADY;
 
-	if (hw_ep_is_primed(mEp->num, mEp->dir))
-		return -EBUSY;
-
 	mReq->req.status = -EALREADY;
-
-	if (mReq->req.length && !mReq->req.dma) {
+	if (length && !mReq->req.dma) {
 		mReq->req.dma = \
 			dma_map_single(mEp->device, mReq->req.buf,
-				       mReq->req.length, mEp->dir ?
-				       DMA_TO_DEVICE : DMA_FROM_DEVICE);
+				       length, mEp->dir ? DMA_TO_DEVICE :
+				       DMA_FROM_DEVICE);
 		if (mReq->req.dma == 0)
 			return -ENOMEM;
 
 		mReq->map = 1;
 	}
 
+	if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
+		mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
+					   &mReq->zdma);
+		if (mReq->zptr == NULL) {
+			if (mReq->map) {
+				dma_unmap_single(mEp->device, mReq->req.dma,
+					length, mEp->dir ? DMA_TO_DEVICE :
+					DMA_FROM_DEVICE);
+				mReq->req.dma = 0;
+				mReq->map     = 0;
+			}
+			return -ENOMEM;
+		}
+		memset(mReq->zptr, 0, sizeof(*mReq->zptr));
+		mReq->zptr->next    = TD_TERMINATE;
+		mReq->zptr->token   = TD_STATUS_ACTIVE;
+		if (!mReq->req.no_interrupt)
+			mReq->zptr->token   |= TD_IOC;
+	}
 	/*
 	 * TD configuration
 	 * TODO - handle requests which spawns into several TDs
 	 */
 	memset(mReq->ptr, 0, sizeof(*mReq->ptr));
-	mReq->ptr->next    |= TD_TERMINATE;
-	mReq->ptr->token    = mReq->req.length << ffs_nr(TD_TOTAL_BYTES);
+	mReq->ptr->token    = length << ffs_nr(TD_TOTAL_BYTES);
 	mReq->ptr->token   &= TD_TOTAL_BYTES;
-	mReq->ptr->token   |= TD_IOC;
 	mReq->ptr->token   |= TD_STATUS_ACTIVE;
+	if (mReq->zptr) {
+		mReq->ptr->next    = mReq->zdma;
+	} else {
+		mReq->ptr->next    = TD_TERMINATE;
+		if (!mReq->req.no_interrupt)
+			mReq->ptr->token  |= TD_IOC;
+	}
 	mReq->ptr->page[0]  = mReq->req.dma;
 	for (i = 1; i < 5; i++)
 		mReq->ptr->page[i] =
 			(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
 
-	/*
-	 *  QH configuration
-	 *  At this point it's guaranteed exclusive access to qhead
-	 *  (endpt is not primed) so it's no need to use tripwire
-	 */
+	if (!list_empty(&mEp->qh.queue)) {
+		struct ci13xxx_req *mReqPrev;
+		int n = hw_ep_bit(mEp->num, mEp->dir);
+		int tmp_stat;
+
+		mReqPrev = list_entry(mEp->qh.queue.prev,
+				struct ci13xxx_req, queue);
+		if (mReqPrev->zptr)
+			mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK;
+		else
+			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
+		wmb();
+		if (hw_cread(CAP_ENDPTPRIME, BIT(n)))
+			goto done;
+		do {
+			hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n));
+		} while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW));
+		hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0);
+		if (tmp_stat)
+			goto done;
+	}
+
+	/*  QH configuration */
 	mEp->qh.ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */
 	mEp->qh.ptr->td.token &= ~TD_STATUS;   /* clear status */
-	if (mReq->req.zero == 0)
-		mEp->qh.ptr->cap |=  QH_ZLT;
-	else
-		mEp->qh.ptr->cap &= ~QH_ZLT;
+	mEp->qh.ptr->cap |=  QH_ZLT;
 
 	wmb();   /* synchronize before ep prime */
 
-	return hw_ep_prime(mEp->num, mEp->dir,
+	ret = hw_ep_prime(mEp->num, mEp->dir,
 			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
+done:
+	return ret;
 }
 
 /**
@@ -1504,8 +1526,15 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	if (mReq->req.status != -EALREADY)
 		return -EINVAL;
 
-	if (hw_ep_is_primed(mEp->num, mEp->dir))
-		hw_ep_flush(mEp->num, mEp->dir);
+	if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0)
+		return -EBUSY;
+
+	if (mReq->zptr) {
+		if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0)
+			return -EBUSY;
+		dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
+		mReq->zptr = NULL;
+	}
 
 	mReq->req.status = 0;
 
@@ -1517,9 +1546,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	}
 
 	mReq->req.status = mReq->ptr->token & TD_STATUS;
-	if      ((TD_STATUS_ACTIVE & mReq->req.status) != 0)
-		mReq->req.status = -ECONNRESET;
-	else if ((TD_STATUS_HALTED & mReq->req.status) != 0)
+	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
 		mReq->req.status = -1;
 	else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
 		mReq->req.status = -1;
@@ -1581,12 +1608,19 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
 	struct usb_ep *ep;
 	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
+	unsigned long flags;
 
 	trace("%p", gadget);
 
 	if (gadget == NULL)
 		return -EINVAL;
 
+	spin_lock_irqsave(udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->remote_wakeup = 0;
+	udc->suspended = 0;
+	spin_unlock_irqrestore(udc->lock, flags);
+
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
@@ -1720,7 +1754,8 @@ __acquires(mEp->lock)
 	}
 
 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-		/* TODO: D1 - Remote Wakeup; D0 - Self Powered */
+		/* Assume that device is bus powered for now. */
+		*((u16 *)req->buf) = _udc->remote_wakeup << 1;
 		retval = 0;
 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 		   == USB_RECIP_ENDPOINT) {
@@ -1749,6 +1784,28 @@ __acquires(mEp->lock)
 }
 
 /**
+ * isr_setup_status_complete: setup_status request complete function
+ * @ep:  endpoint
+ * @req: request handled
+ *
+ * Caller must release lock. Put the port in test mode if test mode
+ * feature is selected.
+ */
+static void
+isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci13xxx *udc = req->context;
+	unsigned long flags;
+
+	trace("%p, %p", ep, req);
+
+	spin_lock_irqsave(udc->lock, flags);
+	if (udc->test_mode)
+		hw_port_test_set(udc->test_mode);
+	spin_unlock_irqrestore(udc->lock, flags);
+}
+
+/**
  * isr_setup_status_phase: queues the status phase of a setup transation
  * @udc: udc struct
  *
@@ -1764,6 +1821,8 @@ __acquires(mEp->lock)
 	trace("%p", udc);
 
 	mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in;
+	udc->status->context = udc;
+	udc->status->complete = isr_setup_status_complete;
 
 	spin_unlock(mEp->lock);
 	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
@@ -1783,7 +1842,7 @@ static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
-	struct ci13xxx_req *mReq;
+	struct ci13xxx_req *mReq, *mReqTemp;
 	int retval;
 
 	trace("%p", mEp);
@@ -1791,34 +1850,25 @@ __acquires(mEp->lock)
 	if (list_empty(&mEp->qh.queue))
 		return -EINVAL;
 
-	/* pop oldest request */
-	mReq = list_entry(mEp->qh.queue.next,
-			  struct ci13xxx_req, queue);
-	list_del_init(&mReq->queue);
-
-	retval = _hardware_dequeue(mEp, mReq);
-	if (retval < 0) {
-		dbg_event(_usb_addr(mEp), "DONE", retval);
-		goto done;
-	}
-
-	dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
-
-	if (!list_empty(&mEp->qh.queue)) {
-		struct ci13xxx_req* mReqEnq;
-
-		mReqEnq = list_entry(mEp->qh.queue.next,
-				  struct ci13xxx_req, queue);
-		_hardware_enqueue(mEp, mReqEnq);
+	list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
+			queue) {
+		retval = _hardware_dequeue(mEp, mReq);
+		if (retval < 0)
+			break;
+		list_del_init(&mReq->queue);
+		dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
+		if (mReq->req.complete != NULL) {
+			spin_unlock(mEp->lock);
+			mReq->req.complete(&mEp->ep, &mReq->req);
+			spin_lock(mEp->lock);
+		}
 	}
 
-	if (mReq->req.complete != NULL) {
-		spin_unlock(mEp->lock);
-		mReq->req.complete(&mEp->ep, &mReq->req);
-		spin_lock(mEp->lock);
-	}
+	if (retval == EBUSY)
+		retval = 0;
+	if (retval < 0)
+		dbg_event(_usb_addr(mEp), "DONE", retval);
 
- done:
 	return retval;
 }
 
@@ -1833,6 +1883,7 @@ __releases(udc->lock)
 __acquires(udc->lock)
 {
 	unsigned i;
+	u8 tmode = 0;
 
 	trace("%p", udc);
 
@@ -1895,22 +1946,32 @@ __acquires(udc->lock)
 
 		switch (req.bRequest) {
 		case USB_REQ_CLEAR_FEATURE:
-			if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-			    le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT)
-				goto delegate;
-			if (req.wLength != 0)
-				break;
-			num  = le16_to_cpu(req.wIndex);
-			num &= USB_ENDPOINT_NUMBER_MASK;
-			if (!udc->ci13xxx_ep[num].wedge) {
-				spin_unlock(udc->lock);
-				err = usb_ep_clear_halt(
-					&udc->ci13xxx_ep[num].ep);
-				spin_lock(udc->lock);
-				if (err)
+			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+					le16_to_cpu(req.wValue) ==
+					USB_ENDPOINT_HALT) {
+				if (req.wLength != 0)
 					break;
+				num  = le16_to_cpu(req.wIndex);
+				num &= USB_ENDPOINT_NUMBER_MASK;
+				if (!udc->ci13xxx_ep[num].wedge) {
+					spin_unlock(udc->lock);
+					err = usb_ep_clear_halt(
+						&udc->ci13xxx_ep[num].ep);
+					spin_lock(udc->lock);
+					if (err)
+						break;
+				}
+				err = isr_setup_status_phase(udc);
+			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
+					le16_to_cpu(req.wValue) ==
+					USB_DEVICE_REMOTE_WAKEUP) {
+				if (req.wLength != 0)
+					break;
+				udc->remote_wakeup = 0;
+				err = isr_setup_status_phase(udc);
+			} else {
+				goto delegate;
 			}
-			err = isr_setup_status_phase(udc);
 			break;
 		case USB_REQ_GET_STATUS:
 			if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
@@ -1934,20 +1995,48 @@ __acquires(udc->lock)
 			err = isr_setup_status_phase(udc);
 			break;
 		case USB_REQ_SET_FEATURE:
-			if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-			    le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT)
-				goto delegate;
-			if (req.wLength != 0)
-				break;
-			num  = le16_to_cpu(req.wIndex);
-			num &= USB_ENDPOINT_NUMBER_MASK;
+			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+					le16_to_cpu(req.wValue) ==
+					USB_ENDPOINT_HALT) {
+				if (req.wLength != 0)
+					break;
+				num  = le16_to_cpu(req.wIndex);
+				num &= USB_ENDPOINT_NUMBER_MASK;
 
-			spin_unlock(udc->lock);
-			err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
-			spin_lock(udc->lock);
-			if (err)
-				break;
-			err = isr_setup_status_phase(udc);
+				spin_unlock(udc->lock);
+				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
+				spin_lock(udc->lock);
+				if (!err)
+					isr_setup_status_phase(udc);
+			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
+				if (req.wLength != 0)
+					break;
+				switch (le16_to_cpu(req.wValue)) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					udc->remote_wakeup = 1;
+					err = isr_setup_status_phase(udc);
+					break;
+				case USB_DEVICE_TEST_MODE:
+					tmode = le16_to_cpu(req.wIndex) >> 8;
+					switch (tmode) {
+					case TEST_J:
+					case TEST_K:
+					case TEST_SE0_NAK:
+					case TEST_PACKET:
+					case TEST_FORCE_EN:
+						udc->test_mode = tmode;
+						err = isr_setup_status_phase(
+								udc);
+						break;
+					default:
+						break;
+					}
+				default:
+					goto delegate;
+				}
+			} else {
+				goto delegate;
+			}
 			break;
 		default:
 delegate:
@@ -2178,15 +2267,15 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	/* push request */
 	mReq->req.status = -EINPROGRESS;
 	mReq->req.actual = 0;
-	list_add_tail(&mReq->queue, &mEp->qh.queue);
 
-	if (list_is_singular(&mEp->qh.queue))
-		retval = _hardware_enqueue(mEp, mReq);
+	retval = _hardware_enqueue(mEp, mReq);
 
 	if (retval == -EALREADY) {
 		dbg_event(_usb_addr(mEp), "QUEUE", retval);
 		retval = 0;
 	}
+	if (!retval)
+		list_add_tail(&mReq->queue, &mEp->qh.queue);
 
  done:
 	spin_unlock_irqrestore(mEp->lock, flags);
@@ -2206,19 +2295,25 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	trace("%p, %p", ep, req);
 
-	if (ep == NULL || req == NULL || mEp->desc == NULL ||
-	    list_empty(&mReq->queue)  || list_empty(&mEp->qh.queue))
+	if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
+		mEp->desc == NULL || list_empty(&mReq->queue) ||
+		list_empty(&mEp->qh.queue))
 		return -EINVAL;
 
 	spin_lock_irqsave(mEp->lock, flags);
 
 	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
 
-	if (mReq->req.status == -EALREADY)
-		_hardware_dequeue(mEp, mReq);
+	hw_ep_flush(mEp->num, mEp->dir);
 
 	/* pop request */
 	list_del_init(&mReq->queue);
+	if (mReq->map) {
+		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
+				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		mReq->req.dma = 0;
+		mReq->map     = 0;
+	}
 	req->status = -ECONNRESET;
 
 	if (mReq->req.complete != NULL) {
@@ -2377,6 +2472,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 	return 0;
 }
 
+static int ci13xxx_wakeup(struct usb_gadget *_gadget)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	trace();
+
+	spin_lock_irqsave(udc->lock, flags);
+	if (!udc->remote_wakeup) {
+		ret = -EOPNOTSUPP;
+		dbg_trace("remote wakeup feature is not enabled\n");
+		goto out;
+	}
+	if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
+		ret = -EINVAL;
+		dbg_trace("port is not suspended\n");
+		goto out;
+	}
+	hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+out:
+	spin_unlock_irqrestore(udc->lock, flags);
+	return ret;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
@@ -2384,6 +2504,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
  */
 static const struct usb_gadget_ops usb_gadget_ops = {
 	.vbus_session	= ci13xxx_vbus_session,
+	.wakeup		= ci13xxx_wakeup,
 };
 
 /**
@@ -2626,6 +2747,12 @@ static irqreturn_t udc_irq(void)
 			isr_statistics.pci++;
 			udc->gadget.speed = hw_port_is_high_speed() ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
+			if (udc->suspended) {
+				spin_unlock(udc->lock);
+				udc->driver->resume(&udc->gadget);
+				spin_lock(udc->lock);
+				udc->suspended = 0;
+			}
 		}
 		if (USBi_UEI & intr)
 			isr_statistics.uei++;
@@ -2633,8 +2760,15 @@ static irqreturn_t udc_irq(void)
 			isr_statistics.ui++;
 			isr_tr_complete_handler(udc);
 		}
-		if (USBi_SLI & intr)
+		if (USBi_SLI & intr) {
+			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+				udc->suspended = 1;
+				spin_unlock(udc->lock);
+				udc->driver->suspend(&udc->gadget);
+				spin_lock(udc->lock);
+			}
 			isr_statistics.sli++;
+		}
 		retval = IRQ_HANDLED;
 	} else {
 		isr_statistics.none++;
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index a2492b6..2370777 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -33,6 +33,7 @@ struct ci13xxx_td {
 	/* 0 */
 	u32 next;
 #define TD_TERMINATE          BIT(0)
+#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
 	/* 1 */
 	u32 token;
 #define TD_STATUS             (0x00FFUL <<  0)
@@ -74,6 +75,8 @@ struct ci13xxx_req {
 	struct list_head     queue;
 	struct ci13xxx_td   *ptr;
 	dma_addr_t           dma;
+	struct ci13xxx_td   *zptr;
+	dma_addr_t           zdma;
 };
 
 /* Extension of usb_ep */
@@ -125,6 +128,10 @@ struct ci13xxx {
 	u32                        ep0_dir;    /* ep0 direction */
 #define ep0out ci13xxx_ep[0]
 #define ep0in  ci13xxx_ep[16]
+	u8                         remote_wakeup; /* Is remote wakeup feature
+							enabled by the host? */
+	u8                         suspended;  /* suspended by the host */
+	u8                         test_mode;  /* the selected test mode */
 
 	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
 	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
@@ -152,6 +159,7 @@ struct ci13xxx {
 #define USBCMD_RS             BIT(0)
 #define USBCMD_RST            BIT(1)
 #define USBCMD_SUTW           BIT(13)
+#define USBCMD_ATDTW          BIT(14)
 
 /* USBSTS & USBINTR */
 #define USBi_UI               BIT(0)
@@ -165,6 +173,7 @@ struct ci13xxx {
 #define DEVICEADDR_USBADR     (0x7FUL << 25)
 
 /* PORTSC */
+#define PORTSC_FPR            BIT(6)
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1ba4bef..c2251c4 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -813,7 +813,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	 */
 	req->zero = 0;
 	req->complete = composite_setup_complete;
-	req->length = USB_BUFSIZ;
+	req->length = 0;
 	gadget->ep0->driver_data = cdev;
 
 	switch (ctrl->bRequest) {
@@ -887,7 +887,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	case USB_REQ_SET_INTERFACE:
 		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
 			goto unknown;
-		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
 			break;
 		f = cdev->config->interface[intf];
 		if (!f)
@@ -899,7 +899,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	case USB_REQ_GET_INTERFACE:
 		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
 			goto unknown;
-		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
 			break;
 		f = cdev->config->interface[intf];
 		if (!f)
@@ -928,7 +928,7 @@ unknown:
 		 */
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
-			if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
 				break;
 			f = cdev->config->interface[intf];
 			break;
@@ -1258,16 +1258,16 @@ static struct usb_gadget_driver composite_driver = {
  * while it was binding.  That would usually be done in order to wait for
  * some userspace participation.
  */
-extern int usb_composite_probe(struct usb_composite_driver *driver,
+int usb_composite_probe(struct usb_composite_driver *driver,
 			       int (*bind)(struct usb_composite_dev *cdev))
 {
 	if (!driver || !driver->dev || !bind || composite)
 		return -EINVAL;
 
-	if (!driver->iProduct)
-		driver->iProduct = driver->name;
 	if (!driver->name)
 		driver->name = "composite";
+	if (!driver->iProduct)
+		driver->iProduct = driver->name;
 	composite_driver.function =  (char *) driver->name;
 	composite_driver.driver.name = driver->name;
 	composite = driver;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 13b9f47..3214ca3 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1593,8 +1593,8 @@ hub_descriptor (struct usb_hub_descriptor *desc)
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = cpu_to_le16(0x0001);
 	desc->bNbrPorts = 1;
-	desc->bitmap [0] = 0xff;
-	desc->bitmap [1] = 0xff;
+	desc->u.hs.DeviceRemovable[0] = 0xff;
+	desc->u.hs.DeviceRemovable[1] = 0xff;
 }
 
 static int dummy_hub_control (
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 8a83248..9b7360f 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -128,6 +128,13 @@ ep_matches (
 		}
 	}
 
+	/*
+	 * If the protocol driver hasn't yet decided on wMaxPacketSize
+	 * and wants to know the maximum possible, provide the info.
+	 */
+	if (desc->wMaxPacketSize == 0)
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket);
+
 	/* endpoint maxpacket size is an input parameter, except for bulk
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 1499f9e..19fffcc 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -368,6 +368,14 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 	req->buf      = data;
 	req->length   = len;
 
+	/*
+	 * UDC layer requires to provide a buffer even for ZLP, but should
+	 * not use it at all. Let's provide some poisoned pointer to catch
+	 * possible bug in the driver.
+	 */
+	if (req->buf == NULL)
+		req->buf = (void *)0xDEADBABE;
+
 	INIT_COMPLETION(ffs->ep0req_completion);
 
 	ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC);
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 77b1eb5..43a49ec 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -88,15 +88,18 @@ eenahb:
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-#if defined(CONFIG_ARCH_MX35)
-	unsigned int v;
-
-	/* workaround ENGcm09152 for i.MX35 */
-	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				USBPHYCTRL_OTGBASE_OFFSET));
-		writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				USBPHYCTRL_OTGBASE_OFFSET));
+#if defined(CONFIG_SOC_IMX35)
+	if (cpu_is_mx35()) {
+		unsigned int v;
+
+		/* workaround ENGcm09152 for i.MX35 */
+		if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+			v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+					USBPHYCTRL_OTGBASE_OFFSET));
+			writel(v | USBPHYCTRL_EVDO,
+				MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+					USBPHYCTRL_OTGBASE_OFFSET));
+		}
 	}
 #endif
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 4c55eda..912cb8e 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -766,7 +766,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct fsl_req *req = container_of(_req, struct fsl_req, req);
 	struct fsl_udc *udc;
 	unsigned long flags;
-	int is_iso = 0;
 
 	/* catch various bogus parameters */
 	if (!_req || !req->req.complete || !req->req.buf
@@ -781,7 +780,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
-		is_iso = 1;
 	}
 
 	udc = ep->udc;
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
new file mode 100644
index 0000000..763d462
--- /dev/null
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -0,0 +1,1744 @@
+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fusb300_udc.h"
+
+MODULE_DESCRIPTION("FUSB300  USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_ALIAS("platform:fusb300_udc");
+
+#define DRIVER_VERSION	"20 October 2010"
+
+static const char udc_name[] = "fusb300_udc";
+static const char * const fusb300_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9",
+	"ep10", "ep11", "ep12", "ep13", "ep14", "ep15"
+};
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status);
+
+static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset,
+			       u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg |= value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset,
+				u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg &= ~value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+
+static void fusb300_ep_setting(struct fusb300_ep *ep,
+			       struct fusb300_ep_info info)
+{
+	ep->epnum = info.epnum;
+	ep->type = info.type;
+}
+
+static int fusb300_ep_release(struct fusb300_ep *ep)
+{
+	if (!ep->epnum)
+		return 0;
+	ep->epnum = 0;
+	ep->stall = 0;
+	ep->wedged = 0;
+	return 0;
+}
+
+static void fusb300_set_fifo_entry(struct fusb300 *fusb300,
+				   u32 ep)
+{
+	u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	val &= ~FUSB300_EPSET1_FIFOENTRY_MSK;
+	val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM);
+	iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_start_entry(struct fusb300 *fusb300,
+				    u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM;
+
+	reg &= ~FUSB300_EPSET1_START_ENTRY_MSK	;
+	reg |= FUSB300_EPSET1_START_ENTRY(start_entry);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) {
+		fusb300->fifo_entry_num = 0;
+		fusb300->addrofs = 0;
+		pr_err("fifo entry is over the maximum number!\n");
+	} else
+		fusb300->fifo_entry_num++;
+}
+
+/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */
+static void fusb300_set_epaddrofs(struct fusb300 *fusb300,
+				  struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_ADDROFS_MSK;
+	reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+	fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM;
+}
+
+static void ep_fifo_setting(struct fusb300 *fusb300,
+			    struct fusb300_ep_info info)
+{
+	fusb300_set_fifo_entry(fusb300, info.epnum);
+	fusb300_set_start_entry(fusb300, info.epnum);
+	fusb300_set_epaddrofs(fusb300, info);
+}
+
+static void fusb300_set_eptype(struct fusb300 *fusb300,
+			       struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_TYPE_MSK;
+	reg |= FUSB300_EPSET1_TYPE(info.type);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_epdir(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg;
+
+	if (!info.dir_in)
+		return;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+	reg &= ~FUSB300_EPSET1_DIR_MSK;
+	reg |= FUSB300_EPSET1_DIRIN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_ep_active(struct fusb300 *fusb300,
+			  u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	reg |= FUSB300_EPSET1_ACTEN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_epmps(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_MPS_MSK;
+	reg |= FUSB300_EPSET2_MPS(info.maxpacket);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+}
+
+static void fusb300_set_interval(struct fusb300 *fusb300,
+				 struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_INTERVAL(0x7);
+	reg |= FUSB300_EPSET1_INTERVAL(info.interval);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_bwnum(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_BWNUM(0x3);
+	reg |= FUSB300_EPSET1_BWNUM(info.bw_num);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void set_ep_reg(struct fusb300 *fusb300,
+		      struct fusb300_ep_info info)
+{
+	fusb300_set_eptype(fusb300, info);
+	fusb300_set_epdir(fusb300, info);
+	fusb300_set_epmps(fusb300, info);
+
+	if (info.interval)
+		fusb300_set_interval(fusb300, info);
+
+	if (info.bw_num)
+		fusb300_set_bwnum(fusb300, info);
+
+	fusb300_set_ep_active(fusb300, info.epnum);
+}
+
+static int config_ep(struct fusb300_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_ep_info info;
+
+	ep->desc = desc;
+
+	info.interval = 0;
+	info.addrofs = 0;
+	info.bw_num = 0;
+
+	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+	if ((info.type == USB_ENDPOINT_XFER_INT) ||
+	   (info.type == USB_ENDPOINT_XFER_ISOC)) {
+		info.interval = desc->bInterval;
+		if (info.type == USB_ENDPOINT_XFER_ISOC)
+			info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11);
+	}
+
+	ep_fifo_setting(fusb300, info);
+
+	set_ep_reg(fusb300, info);
+
+	fusb300_ep_setting(ep, info);
+
+	fusb300->ep[info.epnum] = ep;
+
+	return 0;
+}
+
+static int fusb300_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300_ep *ep;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	if (ep->fusb300->reenum) {
+		ep->fusb300->fifo_entry_num = 0;
+		ep->fusb300->addrofs = 0;
+		ep->fusb300->reenum = 0;
+	}
+
+	return config_ep(ep, desc);
+}
+
+static int fusb300_disable(struct usb_ep *_ep)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct fusb300_request, queue);
+		spin_lock_irqsave(&ep->fusb300->lock, flags);
+		done(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	}
+
+	return fusb300_ep_release(ep);
+}
+
+static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct fusb300_request *req;
+
+	req = kzalloc(sizeof(struct fusb300_request), gfp_flags);
+	if (!req)
+		return NULL;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_request *req;
+
+	req = container_of(_req, struct fusb300_request, req);
+	kfree(req);
+}
+
+static int enable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't enable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int disable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't disable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+	reg &= ~FUSB300_CSR_LEN_MSK;
+	reg |= FUSB300_CSR_LEN(length);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR);
+}
+
+/* write data to cx fifo */
+static void fusb300_wrcxf(struct fusb300_ep *ep,
+		   struct fusb300_request *req)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+	struct fusb300 *fusb300 = ep->fusb300;
+	u32 length = req->req.length - req->req.actual;
+
+	tmp = req->req.buf + req->req.actual;
+
+	if (length > SS_CTL_MAX_PACKET_SIZE) {
+		fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE);
+		for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp += 4;
+		}
+		req->req.actual += SS_CTL_MAX_PACKET_SIZE;
+	} else { /* length is less than max packet size */
+		fusb300_set_cxlen(fusb300, length);
+		for (i = length >> 2; i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp = tmp + 4;
+		}
+		switch (length % 4) {
+		case 1:
+			data = *tmp;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 2:
+			data = *tmp | *(tmp + 1) << 8;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 3:
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		default:
+			break;
+		}
+		req->req.actual += length;
+	}
+}
+
+static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+		FUSB300_EPSET0_STL);
+}
+
+static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	if (reg & FUSB300_EPSET0_STL) {
+		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
+		reg &= ~FUSB300_EPSET0_STL;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+	}
+}
+
+static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req)
+{
+	if (ep->fusb300->ep0_dir) { /* if IN */
+		if (req->req.length) {
+			fusb300_wrcxf(ep, req);
+		} else
+			printk(KERN_DEBUG "%s : req->req.length = 0x%x\n",
+				__func__, req->req.length);
+		if ((req->req.length == req->req.actual) ||
+		    (req->req.actual < ep->ep.maxpacket))
+			done(ep, req, 0);
+	} else { /* OUT */
+		if (!req->req.length)
+			done(ep, req, 0);
+		else
+			fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1,
+				FUSB300_IGER1_CX_OUT_INT);
+	}
+}
+
+static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+	int request  = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->desc == NULL) /* ep0 */
+		ep0_queue(ep, req);
+	else if (request && !ep->stall)
+		enable_fifo_int(ep);
+
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+	if (!list_empty(&ep->queue))
+		done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
+{
+	struct fusb300_ep *ep;
+	struct fusb300 *fusb300;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	fusb300 = ep->fusb300;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (value) {
+		fusb300_set_epnstall(fusb300, ep->epnum);
+		ep->stall = 1;
+		if (wedge)
+			ep->wedged = 1;
+	} else {
+		fusb300_clear_epnstall(fusb300, ep->epnum);
+		ep->stall = 0;
+		ep->wedged = 0;
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	return ret;
+}
+
+static int fusb300_set_halt(struct usb_ep *_ep, int value)
+{
+	return fusb300_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int fusb300_set_wedge(struct usb_ep *_ep)
+{
+	return fusb300_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static void fusb300_fifo_flush(struct usb_ep *_ep)
+{
+}
+
+static struct usb_ep_ops fusb300_ep_ops = {
+	.enable		= fusb300_enable,
+	.disable	= fusb300_disable,
+
+	.alloc_request	= fusb300_alloc_request,
+	.free_request	= fusb300_free_request,
+
+	.queue		= fusb300_queue,
+	.dequeue	= fusb300_dequeue,
+
+	.set_halt	= fusb300_set_halt,
+	.fifo_flush	= fusb300_fifo_flush,
+	.set_wedge	= fusb300_set_wedge,
+};
+
+/*****************************************************************************/
+static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset,
+		       u32 value)
+{
+	iowrite32(value, fusb300->reg + offset);
+}
+
+static void fusb300_reset(void)
+{
+}
+
+static void fusb300_set_cxstall(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_STL);
+}
+
+static void fusb300_set_cxdone(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_DONE);
+}
+
+/* read data from cx fifo */
+void fusb300_rdcxf(struct fusb300 *fusb300,
+		   u8 *buffer, u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+
+	tmp = buffer;
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+}
+
+#if 0
+static void fusb300_dbg_fifo(struct fusb300_ep *ep,
+				u8 entry, u16 length)
+{
+	u32 reg;
+	u32 i = 0;
+	u32 j = 0;
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
+	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
+		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
+	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
+		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
+
+	for (i = 0; i < (length >> 2); i++) {
+		if (i * 4 == 1024)
+			break;
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i * 4);
+		printk(KERN_DEBUG"  0x%-8x", reg);
+		j++;
+		if ((j % 4)  == 0)
+			printk(KERN_DEBUG "\n");
+	}
+
+	if (length % 4) {
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i * 4);
+		printk(KERN_DEBUG "  0x%x\n", reg);
+	}
+
+	if ((j % 4)  != 0)
+		printk(KERN_DEBUG "\n");
+
+	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
+		FUSB300_GTM_TST_FIFO_DEG);
+}
+
+static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep,
+				u8 entry, u16 length, u8 *golden)
+{
+	u32 reg;
+	u32 i = 0;
+	u32 golden_value;
+	u8 *tmp;
+
+	tmp = golden;
+
+	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry);
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
+	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
+		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
+	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
+		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
+
+	for (i = 0; i < (length >> 2); i++) {
+		if (i * 4 == 1024)
+			break;
+		golden_value = *tmp | *(tmp + 1) << 8 |
+				*(tmp + 2) << 16 | *(tmp + 3) << 24;
+
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i*4);
+
+		if (reg != golden_value) {
+			printk(KERN_DEBUG "0x%x  :  ", (u32)(ep->fusb300->reg +
+				FUSB300_OFFSET_BUFDBG_START + i*4));
+			printk(KERN_DEBUG "    golden = 0x%x, reg = 0x%x\n",
+				golden_value, reg);
+		}
+		tmp += 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		golden_value = *tmp;
+	case 2:
+		golden_value = *tmp | *(tmp + 1) << 8;
+	case 3:
+		golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+	default:
+		break;
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4);
+	if (reg != golden_value) {
+		printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i*4));
+		printk(KERN_DEBUG "  golden = 0x%x, reg = 0x%x\n",
+			golden_value, reg);
+	}
+	}
+
+	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n");
+	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
+		FUSB300_GTM_TST_FIFO_DEG);
+}
+#endif
+
+static void fusb300_rdfifo(struct fusb300_ep *ep,
+			  struct fusb300_request *req,
+			  u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data, reg;
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	tmp = req->req.buf + req->req.actual;
+	req->req.actual += length;
+
+	if (req->req.actual > req->req.length)
+		printk(KERN_DEBUG "req->req.actual > req->req.length\n");
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+
+	do {
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
+		if (i)
+			printk(KERN_INFO "sync fifo is not empty!\n");
+		i++;
+	} while (!reg);
+}
+
+/* write data to fifo */
+static void fusb300_wrfifo(struct fusb300_ep *ep,
+			   struct fusb300_request *req)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data, reg;
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	tmp = req->req.buf;
+	req->req.actual = req->req.length;
+
+	for (i = (req->req.length >> 2); i > 0; i--) {
+		data = *tmp | *(tmp + 1) << 8 |
+			*(tmp + 2) << 16 | *(tmp + 3) << 24;
+
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		tmp += 4;
+	}
+
+	switch (req->req.length % 4) {
+	case 1:
+		data = *tmp;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	case 2:
+		data = *tmp | *(tmp + 1) << 8;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	case 3:
+		data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	default:
+		break;
+	}
+
+	do {
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
+		if (i)
+			printk(KERN_INFO"sync fifo is not empty!\n");
+		i++;
+	} while (!reg);
+}
+
+static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	value = reg & FUSB300_EPSET0_STL;
+
+	return value;
+}
+
+static u8 fusb300_get_cxstall(struct fusb300 *fusb300)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+
+	value = (reg & FUSB300_CSR_STL) >> 1;
+
+	return value;
+}
+
+static void request_error(struct fusb300 *fusb300)
+{
+	fusb300_set_cxstall(fusb300);
+	printk(KERN_DEBUG "request error!!\n");
+}
+
+static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+__releases(fusb300->lock)
+__acquires(fusb300->lock)
+{
+	u8 ep;
+	u16 status = 0;
+	u16 w_index = ctrl->wIndex;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep) {
+			if (fusb300_get_epnstall(fusb300, ep))
+				status = 1 << USB_ENDPOINT_HALT;
+		} else {
+			if (fusb300_get_cxstall(fusb300))
+				status = 0;
+		}
+		break;
+
+	default:
+		request_error(fusb300);
+		return;		/* exit */
+	}
+
+	fusb300->ep0_data = cpu_to_le16(status);
+	fusb300->ep0_req->buf = &fusb300->ep0_data;
+	fusb300->ep0_req->length = 2;
+
+	spin_unlock(&fusb300->lock);
+	fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL);
+	spin_lock(&fusb300->lock);
+}
+
+static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 ep;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep)
+			fusb300_set_epnstall(fusb300, ep);
+		else
+			fusb300_set_cxstall(fusb300);
+		fusb300_set_cxdone(fusb300);
+		}
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+			    FUSB300_EPSET0_CLRSEQNUM);
+}
+
+static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	struct fusb300_ep *ep =
+		fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
+			if (ep->wedged) {
+				fusb300_set_cxdone(fusb300);
+				break;
+			}
+			if (ep->stall) {
+				ep->stall = 0;
+				fusb300_clear_seqnum(fusb300, ep->epnum);
+				fusb300_clear_epnstall(fusb300, ep->epnum);
+				if (!list_empty(&ep->queue))
+					enable_fifo_int(ep);
+			}
+		}
+		fusb300_set_cxdone(fusb300);
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR);
+
+	reg &= ~FUSB300_DAR_DRVADDR_MSK;
+	reg |= FUSB300_DAR_DRVADDR(addr);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR);
+}
+
+static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->wValue >= 0x0100)
+		request_error(fusb300);
+	else {
+		fusb300_set_dev_addr(fusb300, ctrl->wValue);
+		fusb300_set_cxdone(fusb300);
+	}
+}
+
+#define UVC_COPY_DESCRIPTORS(mem, src) \
+	do { \
+		const struct usb_descriptor_header * const *__src; \
+		for (__src = src; *__src; ++__src) { \
+			memcpy(mem, *__src, (*__src)->bLength); \
+			mem += (*__src)->bLength; \
+		} \
+	} while (0)
+
+static void fusb300_ep0_complete(struct usb_ep *ep,
+				struct usb_request *req)
+{
+}
+
+static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 *p = (u8 *)ctrl;
+	u8 ret = 0;
+	u8 i = 0;
+
+	fusb300_rdcxf(fusb300, p, 8);
+	fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN;
+	fusb300->ep0_length = ctrl->wLength;
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(fusb300, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_ADDRESS:
+			set_address(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR,
+					   FUSB300_DAR_SETCONFG);
+			/* clear sequence number */
+			for (i = 1; i <= FUSB300_MAX_NUM_EP; i++)
+				fusb300_clear_seqnum(fusb300, i);
+			fusb300->reenum = 1;
+			ret = 1;
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+
+	return ret;
+}
+
+static void fusb300_set_ep_bycnt(struct fusb300_ep *ep, u32 bycnt)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+
+	reg &= ~FUSB300_FFR_BYCNT;
+	reg |= bycnt & FUSB300_FFR_BYCNT;
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+}
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status)
+{
+	list_del_init(&req->queue);
+
+	/* don't modify queue heads during completion callback */
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	spin_unlock(&ep->fusb300->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->fusb300->lock);
+
+	if (ep->epnum) {
+		disable_fifo_int(ep);
+		if (!list_empty(&ep->queue))
+			enable_fifo_int(ep);
+	} else
+		fusb300_set_cxdone(ep->fusb300);
+}
+
+void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep,
+			struct fusb300_request *req)
+{
+	u32 value;
+	u32 reg;
+
+	/* wait SW owner */
+	do {
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+		reg &= FUSB300_EPPRD0_H;
+	} while (reg);
+
+	iowrite32((u32) req->req.buf, ep->fusb300->reg +
+		FUSB300_OFFSET_EPPRD_W1(ep->epnum));
+
+	value = FUSB300_EPPRD0_BTC(req->req.length) | FUSB300_EPPRD0_H |
+		FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I;
+	iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+
+	iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum));
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY,
+		FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum));
+}
+
+static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
+{
+	u32 reg;
+
+	do {
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1);
+		if ((reg & FUSB300_IGR1_VBUS_CHG_INT) ||
+		    (reg & FUSB300_IGR1_WARM_RST_INT) ||
+		    (reg & FUSB300_IGR1_HOT_RST_INT) ||
+		    (reg & FUSB300_IGR1_USBRST_INT)
+		)
+			goto IDMA_RESET;
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0);
+		reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum);
+	} while (!reg);
+
+	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
+		FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
+IDMA_RESET:
+	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0,
+		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+}
+
+static void  fusb300_set_idma(struct fusb300_ep *ep,
+			struct fusb300_request *req)
+{
+	dma_addr_t d;
+	u8 *tmp = NULL;
+
+	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE);
+
+	if (dma_mapping_error(NULL, d)) {
+		kfree(req->req.buf);
+		printk(KERN_DEBUG "dma_mapping_error\n");
+	}
+
+	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE);
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
+		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+
+	tmp = req->req.buf;
+	req->req.buf = (u8 *)d;
+
+	fusb300_fill_idma_prdtbl(ep, req);
+	/* check idma is done */
+	fusb300_wait_idma_finished(ep);
+
+	req->req.buf = tmp;
+
+	if (d)
+		dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
+}
+
+static void in_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300_request *req = list_entry(ep->queue.next,
+					struct fusb300_request, queue);
+
+	if (req->req.length) {
+#if 0
+		fusb300_set_ep_bycnt(ep, req->req.length);
+		fusb300_wrfifo(ep, req);
+#else
+		fusb300_set_idma(ep, req);
+#endif
+	}
+	done(ep, req, 0);
+}
+
+static void out_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_request *req = list_entry(ep->queue.next,
+						 struct fusb300_request, queue);
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+	u32 length = reg & FUSB300_FFR_BYCNT;
+
+	fusb300_rdfifo(ep, req, length);
+
+	/* finish out transfer */
+	if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket))
+		done(ep, req, 0);
+}
+
+static void check_device_mode(struct fusb300 *fusb300)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR);
+
+	switch (reg & FUSB300_GCR_DEVEN_MSK) {
+	case FUSB300_GCR_DEVEN_SS:
+		fusb300->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case FUSB300_GCR_DEVEN_HS:
+		fusb300->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FUSB300_GCR_DEVEN_FS:
+		fusb300->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		fusb300->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+	printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK));
+}
+
+
+static void fusb300_ep0out(struct fusb300 *fusb300)
+{
+	struct fusb300_ep *ep = fusb300->ep[0];
+	u32 reg;
+
+	if (!list_empty(&ep->queue)) {
+		struct fusb300_request *req;
+
+		req = list_first_entry(&ep->queue,
+			struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_rdcxf(ep->fusb300, req->req.buf,
+				req->req.length);
+		done(ep, req, 0);
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+		reg &= ~FUSB300_IGER1_CX_OUT_INT;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1);
+	} else
+		pr_err("%s : empty queue\n", __func__);
+}
+
+static void fusb300_ep0in(struct fusb300 *fusb300)
+{
+	struct fusb300_request *req;
+	struct fusb300_ep *ep = fusb300->ep[0];
+
+	if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) {
+		req = list_entry(ep->queue.next,
+				struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_wrcxf(ep, req);
+		if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+			done(ep, req, 0);
+	} else
+		fusb300_set_cxdone(fusb300);
+}
+
+static void fusb300_grp2_handler(void)
+{
+}
+
+static void fusb300_grp3_handler(void)
+{
+}
+
+static void fusb300_grp4_handler(void)
+{
+}
+
+static void fusb300_grp5_handler(void)
+{
+}
+
+static irqreturn_t fusb300_irq(int irq, void *_fusb300)
+{
+	struct fusb300 *fusb300 = _fusb300;
+	u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+	u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+	u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0);
+	u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0);
+	struct usb_ctrlrequest ctrl;
+	u8 in;
+	u32 reg;
+	int i;
+
+	spin_lock(&fusb300->lock);
+
+	int_grp1 &= int_grp1_en;
+	int_grp0 &= int_grp0_en;
+
+	if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_WARM_RST_INT);
+		printk(KERN_INFO"fusb300_warmreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HOT_RST_INT);
+		printk(KERN_INFO"fusb300_hotreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_USBRST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_USBRST_INT);
+		fusb300_reset();
+	}
+	/* COMABT_INT has a highest priority */
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_CX_COMABT_INT);
+		printk(KERN_INFO"fusb300_ep0abt\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_VBUS_CHG_INT);
+		printk(KERN_INFO"fusb300_vbus_change\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n");
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1,
+				   FUSB300_SSCR1_GO_U3_DONE);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_RESM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_RESM_INT);
+		printk(KERN_INFO "fusb300_resume\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_SUSP_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_SUSP_INT);
+		printk(KERN_INFO "fusb300_suspend\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HS_LPM_INT);
+		printk(KERN_INFO "fusb300_HS_LPM_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_DEV_MODE_CHG_INT);
+		check_device_mode(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) {
+		fusb300_set_cxstall(fusb300);
+		printk(KERN_INFO "fusb300_ep0fail\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) {
+		printk(KERN_INFO "fusb300_ep0setup\n");
+		if (setup_packet(fusb300, &ctrl)) {
+			spin_unlock(&fusb300->lock);
+			if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0)
+				fusb300_set_cxstall(fusb300);
+			spin_lock(&fusb300->lock);
+		}
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT)
+		printk(KERN_INFO "fusb300_cmdend\n");
+
+
+	if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) {
+		printk(KERN_INFO "fusb300_cxout\n");
+		fusb300_ep0out(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_IN_INT) {
+		printk(KERN_INFO "fusb300_cxin\n");
+		fusb300_ep0in(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP5)
+		fusb300_grp5_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP4)
+		fusb300_grp4_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP3)
+		fusb300_grp3_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP2)
+		fusb300_grp2_handler();
+
+	if (int_grp0) {
+		for (i = 1; i < FUSB300_MAX_NUM_EP; i++) {
+			if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) {
+				reg = ioread32(fusb300->reg +
+					FUSB300_OFFSET_EPSET1(i));
+				in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0;
+				if (in)
+					in_ep_fifo_handler(fusb300->ep[i]);
+				else
+					out_ep_fifo_handler(fusb300->ep[i]);
+			}
+		}
+	}
+
+	spin_unlock(&fusb300->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void fusb300_set_u2_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~0xff;
+	reg |= FUSB300_SSCR2_U2TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void fusb300_set_u1_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~(0xff << 8);
+	reg |= FUSB300_SSCR2_U1TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void init_controller(struct fusb300 *fusb300)
+{
+	u32 reg;
+	u32 mask = 0;
+	u32 val = 0;
+
+	/* split on */
+	mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR);
+
+	/* enable high-speed LPM */
+	mask = val = FUSB300_HSCR_HS_LPM_PERMIT;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR);
+
+	/*set u1 u2 timmer*/
+	fusb300_set_u2_timeout(fusb300, 0xff);
+	fusb300_set_u1_timeout(fusb300, 0xff);
+
+	/* enable all grp1 interrupt */
+	iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1);
+}
+/*------------------------------------------------------------------------*/
+static struct fusb300 *the_controller;
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	struct fusb300 *fusb300 = the_controller;
+	int retval;
+
+	if (!driver
+			|| driver->speed < USB_SPEED_FULL
+			|| !bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	if (!fusb300)
+		return -ENODEV;
+
+	if (fusb300->driver)
+		return -EBUSY;
+
+	/* hook up the driver */
+	driver->driver.bus = NULL;
+	fusb300->driver = driver;
+	fusb300->gadget.dev.driver = &driver->driver;
+
+	retval = device_add(&fusb300->gadget.dev);
+	if (retval) {
+		pr_err("device_add error (%d)\n", retval);
+		goto error;
+	}
+
+	retval = bind(&fusb300->gadget);
+	if (retval) {
+		pr_err("bind to driver error (%d)\n", retval);
+		device_del(&fusb300->gadget.dev);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	fusb300->driver = NULL;
+	fusb300->gadget.dev.driver = NULL;
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct fusb300 *fusb300 = the_controller;
+
+	if (driver != fusb300->driver || !driver->unbind)
+		return -EINVAL;
+
+	driver->unbind(&fusb300->gadget);
+	fusb300->gadget.dev.driver = NULL;
+
+	init_controller(fusb300);
+	device_del(&fusb300->gadget.dev);
+	fusb300->driver = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+/*--------------------------------------------------------------------------*/
+
+static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	return 0;
+}
+
+static struct usb_gadget_ops fusb300_gadget_ops = {
+	.pullup		= fusb300_udc_pullup,
+};
+
+static int __exit fusb300_remove(struct platform_device *pdev)
+{
+	struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev);
+
+	iounmap(fusb300->reg);
+	free_irq(platform_get_irq(pdev, 0), fusb300);
+
+	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	kfree(fusb300);
+
+	return 0;
+}
+
+static int __init fusb300_probe(struct platform_device *pdev)
+{
+	struct resource *res, *ires, *ires1;
+	void __iomem *reg = NULL;
+	struct fusb300 *fusb300 = NULL;
+	struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP];
+	int ret = 0;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		pr_err("platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
+		goto clean_up;
+	}
+
+	ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!ires1) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ 1 error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		pr_err("ioremap error.\n");
+		goto clean_up;
+	}
+
+	/* initialize udc */
+	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
+	if (fusb300 == NULL) {
+		pr_err("kzalloc error\n");
+		goto clean_up;
+	}
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
+		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
+		if (_ep[i] == NULL) {
+			pr_err("_ep kzalloc error\n");
+			goto clean_up;
+		}
+		fusb300->ep[i] = _ep[i];
+	}
+
+	spin_lock_init(&fusb300->lock);
+
+	dev_set_drvdata(&pdev->dev, fusb300);
+
+	fusb300->gadget.ops = &fusb300_gadget_ops;
+
+	device_initialize(&fusb300->gadget.dev);
+
+	dev_set_name(&fusb300->gadget.dev, "gadget");
+
+	fusb300->gadget.is_dualspeed = 1;
+	fusb300->gadget.dev.parent = &pdev->dev;
+	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	fusb300->gadget.dev.release = pdev->dev.release;
+	fusb300->gadget.name = udc_name;
+	fusb300->reg = reg;
+
+	ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED,
+			  udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	ret = request_irq(ires1->start, fusb300_irq,
+			IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq1 error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	INIT_LIST_HEAD(&fusb300->gadget.ep_list);
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) {
+		struct fusb300_ep *ep = fusb300->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list);
+			list_add_tail(&fusb300->ep[i]->ep.ep_list,
+				     &fusb300->gadget.ep_list);
+		}
+		ep->fusb300 = fusb300;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = fusb300_ep_name[i];
+		ep->ep.ops = &fusb300_ep_ops;
+		ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE;
+	}
+	fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE;
+	fusb300->ep[0]->epnum = 0;
+	fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
+	INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
+
+	the_controller = fusb300;
+
+	fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
+				GFP_KERNEL);
+	if (fusb300->ep0_req == NULL)
+		goto clean_up3;
+
+	init_controller(fusb300);
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+
+	return 0;
+
+clean_up3:
+	free_irq(ires->start, fusb300);
+
+clean_up:
+	if (fusb300) {
+		if (fusb300->ep0_req)
+			fusb300_free_request(&fusb300->ep[0]->ep,
+				fusb300->ep0_req);
+		kfree(fusb300);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+static struct platform_driver fusb300_driver = {
+	.remove =	__exit_p(fusb300_remove),
+	.driver		= {
+		.name =	(char *) udc_name,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init fusb300_udc_init(void)
+{
+	return platform_driver_probe(&fusb300_driver, fusb300_probe);
+}
+
+module_init(fusb300_udc_init);
+
+static void __exit fusb300_udc_cleanup(void)
+{
+	platform_driver_unregister(&fusb300_driver);
+}
+module_exit(fusb300_udc_cleanup);
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
new file mode 100644
index 0000000..f51aa2e
--- /dev/null
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -0,0 +1,687 @@
+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+
+#ifndef __FUSB300_UDC_H__
+#define __FUSB300_UDC_H_
+
+#include <linux/kernel.h>
+
+#define FUSB300_OFFSET_GCR		0x00
+#define FUSB300_OFFSET_GTM		0x04
+#define FUSB300_OFFSET_DAR		0x08
+#define FUSB300_OFFSET_CSR		0x0C
+#define FUSB300_OFFSET_CXPORT		0x10
+#define FUSB300_OFFSET_EPSET0(n)	(0x20 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET1(n)	(0x24 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET2(n)	(0x28 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPFFR(n)		(0x2c + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSTRID(n)	(0x40 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_HSPTM		0x300
+#define FUSB300_OFFSET_HSCR		0x304
+#define FUSB300_OFFSET_SSCR0		0x308
+#define FUSB300_OFFSET_SSCR1		0x30C
+#define FUSB300_OFFSET_TT		0x310
+#define FUSB300_OFFSET_DEVNOTF		0x314
+#define FUSB300_OFFSET_DNC1		0x318
+#define FUSB300_OFFSET_CS		0x31C
+#define FUSB300_OFFSET_SOF		0x324
+#define FUSB300_OFFSET_EFCS		0x328
+#define FUSB300_OFFSET_IGR0		0x400
+#define FUSB300_OFFSET_IGR1		0x404
+#define FUSB300_OFFSET_IGR2		0x408
+#define FUSB300_OFFSET_IGR3		0x40C
+#define FUSB300_OFFSET_IGR4		0x410
+#define FUSB300_OFFSET_IGR5		0x414
+#define FUSB300_OFFSET_IGER0		0x420
+#define FUSB300_OFFSET_IGER1		0x424
+#define FUSB300_OFFSET_IGER2		0x428
+#define FUSB300_OFFSET_IGER3		0x42C
+#define FUSB300_OFFSET_IGER4		0x430
+#define FUSB300_OFFSET_IGER5		0x434
+#define FUSB300_OFFSET_DMAHMER		0x500
+#define FUSB300_OFFSET_EPPRDRDY		0x504
+#define FUSB300_OFFSET_DMAEPMR		0x508
+#define FUSB300_OFFSET_DMAENR		0x50C
+#define FUSB300_OFFSET_DMAAPR		0x510
+#define FUSB300_OFFSET_AHBCR		0x514
+#define FUSB300_OFFSET_EPPRD_W0(n)	(0x520 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W1(n)	(0x524 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W2(n)	(0x528 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPRD_PTR(n)	(0x52C + (n - 1) * 0x10)
+#define FUSB300_OFFSET_BUFDBG_START	0x800
+#define FUSB300_OFFSET_BUFDBG_END	0xBFC
+#define FUSB300_OFFSET_EPPORT(n)	(0x1010 + (n - 1) * 0x10)
+
+/*
+ * *	Global Control Register (offset = 000H)
+ * */
+#define FUSB300_GCR_SF_RST		(1 << 8)
+#define FUSB300_GCR_VBUS_STATUS		(1 << 7)
+#define FUSB300_GCR_FORCE_HS_SUSP	(1 << 6)
+#define FUSB300_GCR_SYNC_FIFO1_CLR	(1 << 5)
+#define FUSB300_GCR_SYNC_FIFO0_CLR	(1 << 4)
+#define FUSB300_GCR_FIFOCLR		(1 << 3)
+#define FUSB300_GCR_GLINTEN		(1 << 2)
+#define FUSB300_GCR_DEVEN_FS		0x3
+#define FUSB300_GCR_DEVEN_HS		0x2
+#define FUSB300_GCR_DEVEN_SS		0x1
+#define FUSB300_GCR_DEVDIS		0x0
+#define FUSB300_GCR_DEVEN_MSK		0x3
+
+
+/*
+ * *Global Test Mode (offset = 004H)
+ * */
+#define FUSB300_GTM_TST_DIS_SOFGEN	(1 << 16)
+#define FUSB300_GTM_TST_CUR_EP_ENTRY(n)	((n & 0xF) << 12)
+#define FUSB300_GTM_TST_EP_ENTRY(n)	((n & 0xF) << 8)
+#define FUSB300_GTM_TST_EP_NUM(n)	((n & 0xF) << 4)
+#define FUSB300_GTM_TST_FIFO_DEG	(1 << 1)
+#define FUSB300_GTM_TSTMODE		(1 << 0)
+
+/*
+ * * Device Address Register (offset = 008H)
+ * */
+#define FUSB300_DAR_SETCONFG	(1 << 7)
+#define FUSB300_DAR_DRVADDR(x)	(x & 0x7F)
+#define FUSB300_DAR_DRVADDR_MSK	0x7F
+
+/*
+ * *Control Transfer Configuration and Status Register
+ * (CX_Config_Status, offset = 00CH)
+ * */
+#define FUSB300_CSR_LEN(x)	((x & 0xFFFF) << 8)
+#define FUSB300_CSR_LEN_MSK	(0xFFFF << 8)
+#define FUSB300_CSR_EMP		(1 << 4)
+#define FUSB300_CSR_FUL		(1 << 3)
+#define FUSB300_CSR_CLR		(1 << 2)
+#define FUSB300_CSR_STL		(1 << 1)
+#define FUSB300_CSR_DONE	(1 << 0)
+
+/*
+ * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 )
+ * */
+#define FUSB300_EPSET0_CLRSEQNUM	(1 << 2)
+#define FUSB300_EPSET0_EPn_TX0BYTE	(1 << 1)
+#define FUSB300_EPSET0_STL		(1 << 0)
+
+/*
+ * * EPn Setting 1 (EPn_SET1, offset = 024H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET1_START_ENTRY(x)	((x & 0xFF) << 24)
+#define FUSB300_EPSET1_START_ENTRY_MSK	(0xFF << 24)
+#define FUSB300_EPSET1_FIFOENTRY(x)	((x & 0x1F) << 12)
+#define FUSB300_EPSET1_FIFOENTRY_MSK	(0x1f << 12)
+#define FUSB300_EPSET1_INTERVAL(x)	((x & 0x7) << 6)
+#define FUSB300_EPSET1_BWNUM(x)		((x & 0x3) << 4)
+#define FUSB300_EPSET1_TYPEISO		(1 << 2)
+#define FUSB300_EPSET1_TYPEBLK		(2 << 2)
+#define FUSB300_EPSET1_TYPEINT		(3 << 2)
+#define FUSB300_EPSET1_TYPE(x)		((x & 0x3) << 2)
+#define FUSB300_EPSET1_TYPE_MSK		(0x3 << 2)
+#define FUSB300_EPSET1_DIROUT		(0 << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR(x)		((x & 0x1) << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR_MSK		((0x1) << 1)
+#define FUSB300_EPSET1_ACTDIS		0
+#define FUSB300_EPSET1_ACTEN		1
+
+/*
+ * *EPn Setting 2 (EPn_SET2, offset = 028H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET2_ADDROFS(x)	((x & 0x7FFF) << 16)
+#define FUSB300_EPSET2_ADDROFS_MSK	(0x7fff << 16)
+#define FUSB300_EPSET2_MPS(x)		(x & 0x7FF)
+#define FUSB300_EPSET2_MPS_MSK		0x7FF
+
+/*
+ * * EPn FIFO Register (offset = 2cH+(n-1)*30H)
+ * */
+#define FUSB300_FFR_RST		(1 << 31)
+#define FUSB300_FF_FUL		(1 << 30)
+#define FUSB300_FF_EMPTY	(1 << 29)
+#define FUSB300_FFR_BYCNT	0x1FFFF
+
+/*
+ * *EPn Stream ID (EPn_STR_ID, offset = 040H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_STRID_STREN	(1 << 16)
+#define FUSB300_STRID_STRID(x)	(x & 0xFFFF)
+
+/*
+ * *HS PHY Test Mode (offset = 300H)
+ * */
+#define FUSB300_HSPTM_TSTPKDONE		(1 << 4)
+#define FUSB300_HSPTM_TSTPKT		(1 << 3)
+#define FUSB300_HSPTM_TSTSET0NAK	(1 << 2)
+#define FUSB300_HSPTM_TSTKSTA		(1 << 1)
+#define FUSB300_HSPTM_TSTJSTA		(1 << 0)
+
+/*
+ * *HS Control Register (offset = 304H)
+ * */
+#define FUSB300_HSCR_HS_LPM_PERMIT	(1 << 8)
+#define FUSB300_HSCR_HS_LPM_RMWKUP	(1 << 7)
+#define FUSB300_HSCR_CAP_LPM_RMWKUP	(1 << 6)
+#define FUSB300_HSCR_HS_GOSUSP		(1 << 5)
+#define FUSB300_HSCR_HS_GORMWKU		(1 << 4)
+#define FUSB300_HSCR_CAP_RMWKUP		(1 << 3)
+#define FUSB300_HSCR_IDLECNT_0MS	0
+#define FUSB300_HSCR_IDLECNT_1MS	1
+#define FUSB300_HSCR_IDLECNT_2MS	2
+#define FUSB300_HSCR_IDLECNT_3MS	3
+#define FUSB300_HSCR_IDLECNT_4MS	4
+#define FUSB300_HSCR_IDLECNT_5MS	5
+#define FUSB300_HSCR_IDLECNT_6MS	6
+#define FUSB300_HSCR_IDLECNT_7MS	7
+
+/*
+ * * SS Controller Register 0 (offset = 308H)
+ * */
+#define FUSB300_SSCR0_MAX_INTERVAL(x)	((x & 0x7) << 4)
+#define FUSB300_SSCR0_U2_FUN_EN		(1 << 1)
+#define FUSB300_SSCR0_U1_FUN_EN		(1 << 0)
+
+/*
+ * * SS Controller Register 1 (offset = 30CH)
+ * */
+#define FUSB300_SSCR1_GO_U3_DONE	(1 << 8)
+#define FUSB300_SSCR1_TXDEEMPH_LEVEL	(1 << 7)
+#define FUSB300_SSCR1_DIS_SCRMB		(1 << 6)
+#define FUSB300_SSCR1_FORCE_RECOVERY	(1 << 5)
+#define FUSB300_SSCR1_U3_WAKEUP_EN	(1 << 4)
+#define FUSB300_SSCR1_U2_EXIT_EN	(1 << 3)
+#define FUSB300_SSCR1_U1_EXIT_EN	(1 << 2)
+#define FUSB300_SSCR1_U2_ENTRY_EN	(1 << 1)
+#define FUSB300_SSCR1_U1_ENTRY_EN	(1 << 0)
+
+/*
+ * *SS Controller Register 2  (offset = 310H)
+ * */
+#define FUSB300_SSCR2_SS_TX_SWING		(1 << 25)
+#define FUSB300_SSCR2_FORCE_LINKPM_ACCEPT	(1 << 24)
+#define FUSB300_SSCR2_U2_INACT_TIMEOUT(x)	((x & 0xFF) << 16)
+#define FUSB300_SSCR2_U1TIMEOUT(x)		((x & 0xFF) << 8)
+#define FUSB300_SSCR2_U2TIMEOUT(x)		(x & 0xFF)
+
+/*
+ * *SS Device Notification Control (DEV_NOTF, offset = 314H)
+ * */
+#define FUSB300_DEVNOTF_CONTEXT0(x)		((x & 0xFFFFFF) << 8)
+#define FUSB300_DEVNOTF_TYPE_DIS		0
+#define FUSB300_DEVNOTF_TYPE_FUNCWAKE		1
+#define FUSB300_DEVNOTF_TYPE_LTM		2
+#define FUSB300_DEVNOTF_TYPE_BUSINT_ADJMSG	3
+
+/*
+ * *BFM Arbiter Priority Register (BFM_ARB offset = 31CH)
+ * */
+#define FUSB300_BFMARB_ARB_M1	(1 << 3)
+#define FUSB300_BFMARB_ARB_M0	(1 << 2)
+#define FUSB300_BFMARB_ARB_S1	(1 << 1)
+#define FUSB300_BFMARB_ARB_S0	1
+
+/*
+ * *Vendor Specific IO Control Register (offset = 320H)
+ * */
+#define FUSB300_VSIC_VCTLOAD_N	(1 << 8)
+#define FUSB300_VSIC_VCTL(x)	(x & 0x3F)
+
+/*
+ * *SOF Mask Timer (offset = 324H)
+ * */
+#define FUSB300_SOF_MASK_TIMER_HS	0x044c
+#define FUSB300_SOF_MASK_TIMER_FS	0x2710
+
+/*
+ * *Error Flag and Control Status (offset = 328H)
+ * */
+#define FUSB300_EFCS_PM_STATE_U3	3
+#define FUSB300_EFCS_PM_STATE_U2	2
+#define FUSB300_EFCS_PM_STATE_U1	1
+#define FUSB300_EFCS_PM_STATE_U0	0
+
+/*
+ * *Interrupt Group 0 Register (offset = 400H)
+ * */
+#define FUSB300_IGR0_EP15_PRD_INT	(1 << 31)
+#define FUSB300_IGR0_EP14_PRD_INT	(1 << 30)
+#define FUSB300_IGR0_EP13_PRD_INT	(1 << 29)
+#define FUSB300_IGR0_EP12_PRD_INT	(1 << 28)
+#define FUSB300_IGR0_EP11_PRD_INT	(1 << 27)
+#define FUSB300_IGR0_EP10_PRD_INT	(1 << 26)
+#define FUSB300_IGR0_EP9_PRD_INT	(1 << 25)
+#define FUSB300_IGR0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGR0_EP7_PRD_INT	(1 << 23)
+#define FUSB300_IGR0_EP6_PRD_INT	(1 << 22)
+#define FUSB300_IGR0_EP5_PRD_INT	(1 << 21)
+#define FUSB300_IGR0_EP4_PRD_INT	(1 << 20)
+#define FUSB300_IGR0_EP3_PRD_INT	(1 << 19)
+#define FUSB300_IGR0_EP2_PRD_INT	(1 << 18)
+#define FUSB300_IGR0_EP1_PRD_INT	(1 << 17)
+#define FUSB300_IGR0_EPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGR0_EP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGR0_EP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGR0_EP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGR0_EP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGR0_EP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGR0_EP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGR0_EP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGR0_EP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGR0_EP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGR0_EP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGR0_EP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGR0_EP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGR0_EP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGR0_EP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGR0_EP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGR0_EPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Group 1 Register (offset = 404H)
+ * */
+#define FUSB300_IGR1_INTGRP5		(1 << 31)
+#define FUSB300_IGR1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGR1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGR1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGR1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGR1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGR1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGR1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGR1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGR1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGR1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGR1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGR1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGR1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGR1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGR1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGR1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGR1_RESM_INT		(1 << 14)
+#define FUSB300_IGR1_SUSP_INT		(1 << 13)
+#define FUSB300_IGR1_HS_LPM_INT		(1 << 12)
+#define FUSB300_IGR1_USBRST_INT		(1 << 11)
+#define FUSB300_IGR1_DEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGR1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGR1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGR1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGR1_CX_OUT_INT		(1 << 5)
+#define FUSB300_IGR1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGR1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGR1_INTGRP4		(1 << 2)
+#define FUSB300_IGR1_INTGRP3		(1 << 1)
+#define FUSB300_IGR1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Group 2 Register (offset = 408H)
+ * */
+#define FUSB300_IGR2_EP6_STR_ACCEPT_INT		(1 << 29)
+#define FUSB300_IGR2_EP6_STR_RESUME_INT		(1 << 28)
+#define FUSB300_IGR2_EP6_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR2_EP6_STR_NOTRDY_INT		(1 << 26)
+#define FUSB300_IGR2_EP6_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR2_EP5_STR_ACCEPT_INT		(1 << 24)
+#define FUSB300_IGR2_EP5_STR_RESUME_INT		(1 << 23)
+#define FUSB300_IGR2_EP5_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR2_EP5_STR_NOTRDY_INT		(1 << 21)
+#define FUSB300_IGR2_EP5_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR2_EP4_STR_ACCEPT_INT		(1 << 19)
+#define FUSB300_IGR2_EP4_STR_RESUME_INT		(1 << 18)
+#define FUSB300_IGR2_EP4_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR2_EP4_STR_NOTRDY_INT		(1 << 16)
+#define FUSB300_IGR2_EP4_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR2_EP3_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR2_EP3_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR2_EP3_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR2_EP3_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR2_EP3_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR2_EP2_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR2_EP2_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR2_EP2_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR2_EP2_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR2_EP2_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR2_EP1_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR2_EP1_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR2_EP1_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR2_EP1_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR2_EP1_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR2_EP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGR2_EP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGR2_EP_STR_REQ_INT(n)		(1 << (5 * n - 3))
+#define FUSB300_IGR2_EP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGR2_EP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Group 3 Register (offset = 40CH)
+ * */
+#define FUSB300_IGR3_EP12_STR_ACCEPT_INT	(1 << 29)
+#define FUSB300_IGR3_EP12_STR_RESUME_INT	(1 << 28)
+#define FUSB300_IGR3_EP12_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR3_EP12_STR_NOTRDY_INT	(1 << 26)
+#define FUSB300_IGR3_EP12_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR3_EP11_STR_ACCEPT_INT	(1 << 24)
+#define FUSB300_IGR3_EP11_STR_RESUME_INT	(1 << 23)
+#define FUSB300_IGR3_EP11_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR3_EP11_STR_NOTRDY_INT	(1 << 21)
+#define FUSB300_IGR3_EP11_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR3_EP10_STR_ACCEPT_INT	(1 << 19)
+#define FUSB300_IGR3_EP10_STR_RESUME_INT	(1 << 18)
+#define FUSB300_IGR3_EP10_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR3_EP10_STR_NOTRDY_INT	(1 << 16)
+#define FUSB300_IGR3_EP10_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR3_EP9_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR3_EP9_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR3_EP9_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR3_EP9_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR3_EP9_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR3_EP8_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR3_EP8_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR3_EP8_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR3_EP8_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR3_EP8_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR3_EP7_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR3_EP7_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR3_EP7_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR3_EP7_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR3_EP7_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR3_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGR3_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGR3_EP_STR_REQ_INT(n)		(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGR3_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGR3_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Group 4 Register (offset = 410H)
+ * */
+#define FUSB300_IGR4_EP15_RX0_INT		(1 << 31)
+#define FUSB300_IGR4_EP14_RX0_INT		(1 << 30)
+#define FUSB300_IGR4_EP13_RX0_INT		(1 << 29)
+#define FUSB300_IGR4_EP12_RX0_INT		(1 << 28)
+#define FUSB300_IGR4_EP11_RX0_INT		(1 << 27)
+#define FUSB300_IGR4_EP10_RX0_INT		(1 << 26)
+#define FUSB300_IGR4_EP9_RX0_INT		(1 << 25)
+#define FUSB300_IGR4_EP8_RX0_INT		(1 << 24)
+#define FUSB300_IGR4_EP7_RX0_INT		(1 << 23)
+#define FUSB300_IGR4_EP6_RX0_INT		(1 << 22)
+#define FUSB300_IGR4_EP5_RX0_INT		(1 << 21)
+#define FUSB300_IGR4_EP4_RX0_INT		(1 << 20)
+#define FUSB300_IGR4_EP3_RX0_INT		(1 << 19)
+#define FUSB300_IGR4_EP2_RX0_INT		(1 << 18)
+#define FUSB300_IGR4_EP1_RX0_INT		(1 << 17)
+#define FUSB300_IGR4_EP_RX0_INT(x)		(1 << (x + 16))
+#define FUSB300_IGR4_EP15_STR_ACCEPT_INT	(1 << 14)
+#define FUSB300_IGR4_EP15_STR_RESUME_INT	(1 << 13)
+#define FUSB300_IGR4_EP15_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR4_EP15_STR_NOTRDY_INT	(1 << 11)
+#define FUSB300_IGR4_EP15_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR4_EP14_STR_ACCEPT_INT	(1 << 9)
+#define FUSB300_IGR4_EP14_STR_RESUME_INT	(1 << 8)
+#define FUSB300_IGR4_EP14_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR4_EP14_STR_NOTRDY_INT	(1 << 6)
+#define FUSB300_IGR4_EP14_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR4_EP13_STR_ACCEPT_INT	(1 << 4)
+#define FUSB300_IGR4_EP13_STR_RESUME_INT	(1 << 3)
+#define FUSB300_IGR4_EP13_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR4_EP13_STR_NOTRDY_INT	(1 << 1)
+#define FUSB300_IGR4_EP13_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR4_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 12) - 1))
+#define FUSB300_IGR4_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 12) - 2))
+#define FUSB300_IGR4_EP_STR_REQ_INT(n)		(1 << (5 * (n - 12) - 3))
+#define FUSB300_IGR4_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 12) - 4))
+#define FUSB300_IGR4_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 12) - 5))
+
+/*
+ * *Interrupt Group 5 Register (offset = 414H)
+ * */
+#define FUSB300_IGR5_EP_STL_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 0 Register (offset = 420H)
+ * */
+#define FUSB300_IGER0_EEP15_PRD_INT	(1 << 31)
+#define FUSB300_IGER0_EEP14_PRD_INT	(1 << 30)
+#define FUSB300_IGER0_EEP13_PRD_INT	(1 << 29)
+#define FUSB300_IGER0_EEP12_PRD_INT	(1 << 28)
+#define FUSB300_IGER0_EEP11_PRD_INT	(1 << 27)
+#define FUSB300_IGER0_EEP10_PRD_INT	(1 << 26)
+#define FUSB300_IGER0_EEP9_PRD_INT	(1 << 25)
+#define FUSB300_IGER0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGER0_EEP7_PRD_INT	(1 << 23)
+#define FUSB300_IGER0_EEP6_PRD_INT	(1 << 22)
+#define FUSB300_IGER0_EEP5_PRD_INT	(1 << 21)
+#define FUSB300_IGER0_EEP4_PRD_INT	(1 << 20)
+#define FUSB300_IGER0_EEP3_PRD_INT	(1 << 19)
+#define FUSB300_IGER0_EEP2_PRD_INT	(1 << 18)
+#define FUSB300_IGER0_EEP1_PRD_INT	(1 << 17)
+#define FUSB300_IGER0_EEPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGER0_EEP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGER0_EEP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGER0_EEP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGER0_EEP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGER0_EEP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGER0_EEP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGER0_EEP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGER0_EEP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGER0_EEP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGER0_EEP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGER0_EEP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGER0_EEP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGER0_EEP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGER0_EEP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGER0_EEP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGER0_EEPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 1 Register (offset = 424H)
+ * */
+#define FUSB300_IGER1_EINT_GRP5		(1 << 31)
+#define FUSB300_IGER1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGER1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGER1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGER1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGER1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGER1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGER1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGER1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGER1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGER1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGER1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGER1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGER1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGER1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGER1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGER1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGER1_RESM_INT		(1 << 14)
+#define FUSB300_IGER1_SUSP_INT		(1 << 13)
+#define FUSB300_IGER1_LPM_INT		(1 << 12)
+#define FUSB300_IGER1_HS_RST_INT	(1 << 11)
+#define FUSB300_IGER1_EDEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGER1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGER1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGER1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGER1_CX_OUT_INT	(1 << 5)
+#define FUSB300_IGER1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGER1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGER1_INTGRP4		(1 << 2)
+#define FUSB300_IGER1_INTGRP3		(1 << 1)
+#define FUSB300_IGER1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Enable Group 2 Register (offset = 428H)
+ * */
+#define FUSB300_IGER2_EEP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGER2_EEP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGER2_EEP_STR_REQ_INT(n)	(1 << (5 * n - 3))
+#define FUSB300_IGER2_EEP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGER2_EEP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Enable Group 3 Register (offset = 42CH)
+ * */
+
+#define FUSB300_IGER3_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER3_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER3_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER3_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER3_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Enable Group 4 Register (offset = 430H)
+ * */
+
+#define FUSB300_IGER4_EEP_RX0_INT(n)		(1 << (n + 16))
+#define FUSB300_IGER4_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER4_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER4_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER4_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER4_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/* EP PRD Ready (EP_PRD_RDY, offset = 504H) */
+
+#define FUSB300_EPPRDR_EP15_PRD_RDY		(1 << 15)
+#define FUSB300_EPPRDR_EP14_PRD_RDY		(1 << 14)
+#define FUSB300_EPPRDR_EP13_PRD_RDY		(1 << 13)
+#define FUSB300_EPPRDR_EP12_PRD_RDY		(1 << 12)
+#define FUSB300_EPPRDR_EP11_PRD_RDY		(1 << 11)
+#define FUSB300_EPPRDR_EP10_PRD_RDY		(1 << 10)
+#define FUSB300_EPPRDR_EP9_PRD_RDY		(1 << 9)
+#define FUSB300_EPPRDR_EP8_PRD_RDY		(1 << 8)
+#define FUSB300_EPPRDR_EP7_PRD_RDY		(1 << 7)
+#define FUSB300_EPPRDR_EP6_PRD_RDY		(1 << 6)
+#define FUSB300_EPPRDR_EP5_PRD_RDY		(1 << 5)
+#define FUSB300_EPPRDR_EP4_PRD_RDY		(1 << 4)
+#define FUSB300_EPPRDR_EP3_PRD_RDY		(1 << 3)
+#define FUSB300_EPPRDR_EP2_PRD_RDY		(1 << 2)
+#define FUSB300_EPPRDR_EP1_PRD_RDY		(1 << 1)
+#define FUSB300_EPPRDR_EP_PRD_RDY(n)		(1 << n)
+
+/* AHB Bus Control Register (offset = 514H) */
+#define FUSB300_AHBBCR_S1_SPLIT_ON		(1 << 17)
+#define FUSB300_AHBBCR_S0_SPLIT_ON		(1 << 16)
+#define FUSB300_AHBBCR_S1_1entry		(0 << 12)
+#define FUSB300_AHBBCR_S1_4entry		(3 << 12)
+#define FUSB300_AHBBCR_S1_8entry		(5 << 12)
+#define FUSB300_AHBBCR_S1_16entry		(7 << 12)
+#define FUSB300_AHBBCR_S0_1entry		(0 << 8)
+#define FUSB300_AHBBCR_S0_4entry		(3 << 8)
+#define FUSB300_AHBBCR_S0_8entry		(5 << 8)
+#define FUSB300_AHBBCR_S0_16entry		(7 << 8)
+#define FUSB300_AHBBCR_M1_BURST_SINGLE		(0 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR		(1 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR4		(3 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR8		(5 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR16		(7 << 4)
+#define FUSB300_AHBBCR_M0_BURST_SINGLE		0
+#define FUSB300_AHBBCR_M0_BURST_INCR		1
+#define FUSB300_AHBBCR_M0_BURST_INCR4		3
+#define FUSB300_AHBBCR_M0_BURST_INCR8		5
+#define FUSB300_AHBBCR_M0_BURST_INCR16		7
+#define FUSB300_IGER5_EEP_STL_INT(n)		(1 << n)
+
+/* WORD 0 Data Structure of PRD Table */
+#define FUSB300_EPPRD0_M			(1 << 30)
+#define FUSB300_EPPRD0_O			(1 << 29)
+/* The finished prd */
+#define FUSB300_EPPRD0_F			(1 << 28)
+#define FUSB300_EPPRD0_I			(1 << 27)
+#define FUSB300_EPPRD0_A			(1 << 26)
+/* To decide HW point to first prd at next time */
+#define FUSB300_EPPRD0_L			(1 << 25)
+#define FUSB300_EPPRD0_H			(1 << 24)
+#define FUSB300_EPPRD0_BTC(n)			(n & 0xFFFFFF)
+
+/*----------------------------------------------------------------------*/
+#define FUSB300_MAX_NUM_EP		16
+
+#define FUSB300_FIFO_ENTRY_NUM		8
+#define FUSB300_MAX_FIFO_ENTRY		8
+
+#define SS_CTL_MAX_PACKET_SIZE		0x200
+#define SS_BULK_MAX_PACKET_SIZE		0x400
+#define SS_INT_MAX_PACKET_SIZE		0x400
+#define SS_ISO_MAX_PACKET_SIZE		0x400
+
+#define HS_BULK_MAX_PACKET_SIZE		0x200
+#define HS_CTL_MAX_PACKET_SIZE		0x40
+#define HS_INT_MAX_PACKET_SIZE		0x400
+#define HS_ISO_MAX_PACKET_SIZE		0x400
+
+struct fusb300_ep_info {
+	u8	epnum;
+	u8	type;
+	u8	interval;
+	u8	dir_in;
+	u16	maxpacket;
+	u16	addrofs;
+	u16	bw_num;
+};
+
+struct fusb300_request {
+
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+
+struct fusb300_ep {
+	struct usb_ep		ep;
+	struct fusb300		*fusb300;
+
+	struct list_head	queue;
+	unsigned		stall:1;
+	unsigned		wedged:1;
+	unsigned		use_dma:1;
+
+	unsigned char		epnum;
+	unsigned char		type;
+	const struct usb_endpoint_descriptor	*desc;
+};
+
+struct fusb300 {
+	spinlock_t		lock;
+	void __iomem		*reg;
+
+	unsigned long		irq_trigger;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct fusb300_ep	*ep[FUSB300_MAX_NUM_EP];
+
+	struct usb_request	*ep0_req;	/* for internal request */
+	__le16			ep0_data;
+	u32			ep0_length;	/* for internal request */
+	u8			ep0_dir;	/* 0/0x80  out/in */
+
+	u8			fifo_entry_num;	/* next start fifo entry */
+	u32			addrofs;	/* next fifo address offset */
+	u8			reenum;		/* if re-enumeration */
+};
+
+#endif
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 51b19f3..084aa08 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct m66592 *m66592,
 		break;
 	case M66592_BULK:
 		/* isochronous pipes may be used as bulk pipes */
-		if (info->pipe > M66592_BASE_PIPENUM_BULK)
+		if (info->pipe >= M66592_BASE_PIPENUM_BULK)
 			bufnum = info->pipe - M66592_BASE_PIPENUM_BULK;
 		else
 			bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index b120dbb..3e4b35e 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -367,7 +367,6 @@ struct pch_udc_dev {
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
 struct pch_udc_dev *pch_udc;		/* pointer to device object */
-
 static int speed_fs;
 module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
 MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
@@ -383,6 +382,8 @@ MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
  * @dma_mapped:		DMA memory mapped for request
  * @dma_done:		DMA completed for request
  * @chain_len:		chain length
+ * @buf:		Buffer memory for align adjustment
+ * @dma:		DMA memory for align adjustment
  */
 struct pch_udc_request {
 	struct usb_request		req;
@@ -394,6 +395,8 @@ struct pch_udc_request {
 					dma_mapped:1,
 					dma_done:1;
 	unsigned			chain_len;
+	void				*buf;
+	dma_addr_t			dma;
 };
 
 static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
@@ -615,7 +618,7 @@ static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
 /**
  * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
  * @ep:		Reference to structure of type pch_udc_ep_regs
- * @buf_size:	The buffer size
+ * @buf_size:	The buffer word size
  */
 static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
 						 u32 buf_size, u32 ep_in)
@@ -635,7 +638,7 @@ static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
 /**
  * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
  * @ep:		Reference to structure of type pch_udc_ep_regs
- * @pkt_size:	The packet size
+ * @pkt_size:	The packet byte size
  */
 static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
 {
@@ -920,25 +923,10 @@ static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
  */
 static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
 {
-	unsigned int loopcnt = 0;
-	struct pch_udc_dev *dev = ep->dev;
-
 	if (dir) {	/* IN ep */
 		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
 		return;
 	}
-
-	if (pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP)
-		return;
-	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
-	/* Wait for RxFIFO Empty */
-	loopcnt = 10000;
-	while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
-		--loopcnt)
-		udelay(5);
-	if (!loopcnt)
-		dev_err(&dev->pdev->dev, "RxFIFO not Empty\n");
-	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
 }
 
 /**
@@ -1220,14 +1208,31 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
 
 	dev = ep->dev;
 	if (req->dma_mapped) {
-		if (ep->in)
-			dma_unmap_single(&dev->pdev->dev, req->req.dma,
-					 req->req.length, DMA_TO_DEVICE);
-		else
-			dma_unmap_single(&dev->pdev->dev, req->req.dma,
-					 req->req.length, DMA_FROM_DEVICE);
+		if (req->dma == DMA_ADDR_INVALID) {
+			if (ep->in)
+				dma_unmap_single(&dev->pdev->dev, req->req.dma,
+						 req->req.length,
+						 DMA_TO_DEVICE);
+			else
+				dma_unmap_single(&dev->pdev->dev, req->req.dma,
+						 req->req.length,
+						 DMA_FROM_DEVICE);
+			req->req.dma = DMA_ADDR_INVALID;
+		} else {
+			if (ep->in)
+				dma_unmap_single(&dev->pdev->dev, req->dma,
+						 req->req.length,
+						 DMA_TO_DEVICE);
+			else {
+				dma_unmap_single(&dev->pdev->dev, req->dma,
+						 req->req.length,
+						 DMA_FROM_DEVICE);
+				memcpy(req->req.buf, req->buf, req->req.length);
+			}
+			kfree(req->buf);
+			req->dma = DMA_ADDR_INVALID;
+		}
 		req->dma_mapped = 0;
-		req->req.dma = DMA_ADDR_INVALID;
 	}
 	ep->halted = 1;
 	spin_unlock(&dev->lock);
@@ -1268,12 +1273,18 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
 	struct pch_udc_data_dma_desc *td = req->td_data;
 	unsigned i = req->chain_len;
 
+	dma_addr_t addr2;
+	dma_addr_t addr = (dma_addr_t)td->next;
+	td->next = 0x00;
 	for (; i > 1; --i) {
-		dma_addr_t addr = (dma_addr_t)td->next;
 		/* do not free first desc., will be done by free for request */
 		td = phys_to_virt(addr);
+		addr2 = (dma_addr_t)td->next;
 		pci_pool_free(dev->data_requests, td, addr);
+		td->next = 0x00;
+		addr = addr2;
 	}
+	req->chain_len = 1;
 }
 
 /**
@@ -1301,23 +1312,23 @@ static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
 	if (req->chain_len > 1)
 		pch_udc_free_dma_chain(ep->dev, req);
 
-	for (; ; bytes -= buf_len, ++len) {
-		if (ep->in)
-			td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
-		else
-			td->status = PCH_UDC_BS_HST_BSY;
+	if (req->dma == DMA_ADDR_INVALID)
+		td->dataptr = req->req.dma;
+	else
+		td->dataptr = req->dma;
 
+	td->status = PCH_UDC_BS_HST_BSY;
+	for (; ; bytes -= buf_len, ++len) {
+		td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
 		if (bytes <= buf_len)
 			break;
-
 		last = td;
 		td = pci_pool_alloc(ep->dev->data_requests, gfp_flags,
 				    &dma_addr);
 		if (!td)
 			goto nomem;
-
 		i += buf_len;
-		td->dataptr = req->req.dma + i;
+		td->dataptr = req->td_data->dataptr + i;
 		last->next = dma_addr;
 	}
 
@@ -1352,28 +1363,15 @@ static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
 {
 	int	retval;
 
-	req->td_data->dataptr = req->req.dma;
-	req->td_data->status |= PCH_UDC_DMA_LAST;
 	/* Allocate and create a DMA chain */
 	retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
 	if (retval) {
-		pr_err("%s: could not create DMA chain: %d\n",
-		       __func__, retval);
+		pr_err("%s: could not create DMA chain:%d\n", __func__, retval);
 		return retval;
 	}
-	if (!ep->in)
-		return 0;
-	if (req->req.length <= ep->ep.maxpacket)
-		req->td_data->status = PCH_UDC_DMA_LAST | PCH_UDC_BS_HST_BSY |
-				       req->req.length;
-	/* if bytes < max packet then tx bytes must
-	 * be written in packet per buffer mode
-	 */
-	if ((req->req.length < ep->ep.maxpacket) || !ep->num)
+	if (ep->in)
 		req->td_data->status = (req->td_data->status &
-					~PCH_UDC_RXTX_BYTES) | req->req.length;
-	req->td_data->status = (req->td_data->status &
-				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_BSY;
+				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY;
 	return 0;
 }
 
@@ -1529,6 +1527,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
 	if (!req)
 		return NULL;
 	req->req.dma = DMA_ADDR_INVALID;
+	req->dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&req->queue);
 	if (!ep->dev->dma_addr)
 		return &req->req;
@@ -1613,16 +1612,33 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 	/* map the buffer for dma */
 	if (usbreq->length &&
 	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
-		if (ep->in)
-			usbreq->dma = dma_map_single(&dev->pdev->dev,
-						     usbreq->buf,
-						     usbreq->length,
-						     DMA_TO_DEVICE);
-		else
-			usbreq->dma = dma_map_single(&dev->pdev->dev,
-						     usbreq->buf,
-						     usbreq->length,
-						     DMA_FROM_DEVICE);
+		if (!((unsigned long)(usbreq->buf) & 0x03)) {
+			if (ep->in)
+				usbreq->dma = dma_map_single(&dev->pdev->dev,
+							     usbreq->buf,
+							     usbreq->length,
+							     DMA_TO_DEVICE);
+			else
+				usbreq->dma = dma_map_single(&dev->pdev->dev,
+							     usbreq->buf,
+							     usbreq->length,
+							     DMA_FROM_DEVICE);
+		} else {
+			req->buf = kzalloc(usbreq->length, GFP_ATOMIC);
+			if (!req->buf)
+				return -ENOMEM;
+			if (ep->in) {
+				memcpy(req->buf, usbreq->buf, usbreq->length);
+				req->dma = dma_map_single(&dev->pdev->dev,
+							  req->buf,
+							  usbreq->length,
+							  DMA_TO_DEVICE);
+			} else
+				req->dma = dma_map_single(&dev->pdev->dev,
+							  req->buf,
+							  usbreq->length,
+							  DMA_FROM_DEVICE);
+		}
 		req->dma_mapped = 1;
 	}
 	if (usbreq->length > 0) {
@@ -1920,32 +1936,46 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
 	struct pch_udc_request *req;
 	struct pch_udc_dev *dev = ep->dev;
 	unsigned int count;
+	struct pch_udc_data_dma_desc *td;
+	dma_addr_t addr;
 
 	if (list_empty(&ep->queue))
 		return;
-
 	/* next request */
 	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
-	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
-	    PCH_UDC_BS_DMA_DONE)
-		return;
 	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
 	pch_udc_ep_set_ddptr(ep, 0);
-	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
-	    PCH_UDC_RTS_SUCC) {
-		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
-			"epstatus=0x%08x\n",
-			(req->td_data_last->status & PCH_UDC_RXTX_STS),
-			(int)(ep->epsts));
-		return;
-	}
-	count = req->td_data_last->status & PCH_UDC_RXTX_BYTES;
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) ==
+	    PCH_UDC_BS_DMA_DONE)
+		td = req->td_data_last;
+	else
+		td = req->td_data;
 
+	while (1) {
+		if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) {
+			dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x "
+				"epstatus=0x%08x\n",
+				(req->td_data->status & PCH_UDC_RXTX_STS),
+				(int)(ep->epsts));
+			return;
+		}
+		if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
+			if (td->status | PCH_UDC_DMA_LAST) {
+				count = td->status & PCH_UDC_RXTX_BYTES;
+				break;
+			}
+		if (td == req->td_data_last) {
+			dev_err(&dev->pdev->dev, "Not complete RX descriptor");
+			return;
+		}
+		addr = (dma_addr_t)td->next;
+		td = phys_to_virt(addr);
+	}
 	/* on 64k packets the RXBYTES field is zero */
 	if (!count && (req->req.length == UDC_DMA_MAXPACKET))
 		count = UDC_DMA_MAXPACKET;
 	req->td_data->status |= PCH_UDC_DMA_LAST;
-	req->td_data_last->status |= PCH_UDC_BS_HST_BSY;
+	td->status |= PCH_UDC_BS_HST_BSY;
 
 	req->dma_going = 0;
 	req->req.actual = count;
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index c244895..6d8b040 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -902,7 +902,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
 	int pwr_reg;
 	int ep0csr;
 	int i;
-	u32 idx;
+	u32 idx, idx2;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->lock, flags);
@@ -1017,6 +1017,20 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
 		}
 	}
 
+	/* what else causes this interrupt? a receive! who is it? */
+	if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) {
+		for (i = 1; i < S3C2410_ENDPOINTS; i++) {
+			idx2 = udc_read(S3C2410_UDC_INDEX_REG);
+			udc_write(i, S3C2410_UDC_INDEX_REG);
+
+			if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1)
+				s3c2410_udc_handle_ep(&dev->ep[i]);
+
+			/* restore index */
+			udc_write(idx2, S3C2410_UDC_INDEX_REG);
+		}
+	}
+
 	dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
 
 	/* Restore old index */
@@ -1467,7 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
 {
 	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
 
-	if (udc_info && udc_info->udc_command) {
+	if (udc_info && (udc_info->udc_command ||
+		gpio_is_valid(udc_info->pullup_pin))) {
+
 		if (is_on)
 			s3c2410_udc_enable(udc);
 		else {
@@ -1544,6 +1560,32 @@ static const struct usb_gadget_ops s3c2410_ops = {
 	.vbus_draw		= s3c2410_vbus_draw,
 };
 
+static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+	if (!udc_info)
+		return;
+
+	if (udc_info->udc_command) {
+		udc_info->udc_command(S3C2410_UDC_P_DISABLE);
+	} else if (gpio_is_valid(udc_info->pullup_pin)) {
+		int value;
+
+		switch (cmd) {
+		case S3C2410_UDC_P_ENABLE:
+			value = 1;
+			break;
+		case S3C2410_UDC_P_DISABLE:
+			value = 0;
+			break;
+		default:
+			return;
+		}
+		value ^= udc_info->pullup_pin_inverted;
+
+		gpio_set_value(udc_info->pullup_pin, value);
+	}
+}
+
 /*------------------------- gadget driver handling---------------------------*/
 /*
  * s3c2410_udc_disable
@@ -1565,8 +1607,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev)
 	udc_write(0x1F, S3C2410_UDC_EP_INT_REG);
 
 	/* Good bye, cruel world */
-	if (udc_info && udc_info->udc_command)
-		udc_info->udc_command(S3C2410_UDC_P_DISABLE);
+	s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
 
 	/* Set speed to unknown */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1627,8 +1668,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
 	udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG);
 
 	/* time to say "hello, world" */
-	if (udc_info && udc_info->udc_command)
-		udc_info->udc_command(S3C2410_UDC_P_ENABLE);
+	s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
 }
 
 /*
@@ -1903,6 +1943,17 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		udc->vbus = 1;
 	}
 
+	if (udc_info && !udc_info->udc_command &&
+		gpio_is_valid(udc_info->pullup_pin)) {
+
+		retval = gpio_request_one(udc_info->pullup_pin,
+				udc_info->vbus_pin_inverted ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+				"udc pullup");
+		if (retval)
+			goto err_vbus_irq;
+	}
+
 	if (s3c2410_udc_debugfs_root) {
 		udc->regs_info = debugfs_create_file("registers", S_IRUGO,
 				s3c2410_udc_debugfs_root,
@@ -1915,6 +1966,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_vbus_irq:
+	if (udc_info && udc_info->vbus_pin > 0)
+		free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
 err_gpio_claim:
 	if (udc_info && udc_info->vbus_pin > 0)
 		gpio_free(udc_info->vbus_pin);
@@ -1942,6 +1996,10 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 
 	debugfs_remove(udc->regs_info);
 
+	if (udc_info && !udc_info->udc_command &&
+		gpio_is_valid(udc_info->pullup_pin))
+		gpio_free(udc_info->pullup_pin);
+
 	if (udc_info && udc_info->vbus_pin > 0) {
 		irq = gpio_to_irq(udc_info->vbus_pin);
 		free_irq(irq, udc);
@@ -1973,16 +2031,14 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
 {
-	if (udc_info && udc_info->udc_command)
-		udc_info->udc_command(S3C2410_UDC_P_DISABLE);
+	s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
 
 	return 0;
 }
 
 static int s3c2410_udc_resume(struct platform_device *pdev)
 {
-	if (udc_info && udc_info->udc_command)
-		udc_info->udc_command(S3C2410_UDC_P_ENABLE);
+	s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 1eda968..2ac1d214 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -241,7 +241,7 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 	size -= size % out->maxpacket;
 
 	if (dev->port_usb->is_fixed)
-		size = max(size, dev->port_usb->fixed_out_len);
+		size = max_t(size_t, size, dev->port_usb->fixed_out_len);
 
 	skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
 	if (skb == NULL) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0e6afa2..9483acd 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -91,17 +91,28 @@ config USB_EHCI_TT_NEWSCHED
 
 	  If unsure, say Y.
 
+config USB_EHCI_HCD_PMC_MSP
+	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
+	depends on USB_EHCI_HCD && MSP_HAS_USB
+	default n
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
+	---help---
+		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
+		If unsure, say N.
+
 config USB_EHCI_BIG_ENDIAN_MMIO
 	bool
 	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
 				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x || CPU_CAVIUM_OCTEON)
+				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
+				    PMC_MSP)
 	default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x)
+				    PPC_MPC512x || PMC_MSP)
 	default y
 
 config XPS_USB_HCD_XILINX
@@ -145,7 +156,7 @@ config USB_EHCI_MSM
 	bool "Support for MSM on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && ARCH_MSM
 	select USB_EHCI_ROOT_HUB_TT
-	select USB_MSM_OTG_72K
+	select USB_MSM_OTG
 	---help---
 	  Enables support for the USB Host controller present on the
 	  Qualcomm chipsets. Root Hub has inbuilt TT.
@@ -154,6 +165,14 @@ config USB_EHCI_MSM
 	  This driver is not supported on boards like trout which
 	  has an external PHY.
 
+config USB_EHCI_TEGRA
+       boolean "NVIDIA Tegra HCD support"
+       depends on USB_EHCI_HCD && ARCH_TEGRA
+       select USB_EHCI_ROOT_HUB_TT
+       help
+         This driver enables support for the internal USB Host Controllers
+         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on USB_EHCI_HCD && PPC_OF
@@ -162,6 +181,13 @@ config USB_EHCI_HCD_PPC_OF
 	  Enables support for the USB controller present on the PowerPC
 	  OpenFirmware platform bus.
 
+config USB_EHCI_SH
+	bool "EHCI support for SuperH USB controller"
+	depends on USB_EHCI_HCD && SUPERH
+	---help---
+	  Enables support for the on-chip EHCI controller on the SuperH.
+	  If you use the PCI EHCI controller, this option is not necessary.
+
 config USB_W90X900_EHCI
 	bool "W90X900(W90P910) EHCI support"
 	depends on USB_EHCI_HCD && ARCH_W90X900
@@ -315,6 +341,13 @@ config USB_OHCI_HCD_SSB
 
 	  If unsure, say N.
 
+config USB_OHCI_SH
+	bool "OHCI support for SuperH USB controller"
+	depends on USB_OHCI_HCD && SUPERH
+	---help---
+	  Enables support for the on-chip OHCI controller on the SuperH.
+	  If you use the PCI OHCI controller, this option is not necessary.
+
 config USB_CNS3XXX_OHCI
 	bool "Cavium CNS3XXX OHCI Module"
 	depends on USB_OHCI_HCD && ARCH_CNS3XXX
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index d6a69d5..b2ed55c 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -115,7 +115,7 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
-static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
+static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	const struct hc_driver *driver = &ehci_atmel_hc_driver;
@@ -207,7 +207,7 @@ fail_create_hcd:
 	return retval;
 }
 
-static int __exit ehci_atmel_drv_remove(struct platform_device *pdev)
+static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
@@ -227,7 +227,7 @@ static int __exit ehci_atmel_drv_remove(struct platform_device *pdev)
 
 static struct platform_driver ehci_atmel_driver = {
 	.probe		= ehci_atmel_drv_probe,
-	.remove		= __exit_p(ehci_atmel_drv_remove),
+	.remove		= __devexit_p(ehci_atmel_drv_remove),
 	.shutdown	= usb_hcd_platform_shutdown,
 	.driver.name	= "atmel-ehci",
 };
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 3be238a..693c29b 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -28,11 +28,9 @@
 	dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args )
 
 #ifdef VERBOSE_DEBUG
-#	define vdbg dbg
 #	define ehci_vdbg ehci_dbg
 #else
-#	define vdbg(fmt,args...) do { } while (0)
-#	define ehci_vdbg(ehci, fmt, args...) do { } while (0)
+	static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
 #endif
 
 #ifdef	DEBUG
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 74dcf49..d30c4e0 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -114,13 +114,11 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
 
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
-/* for ASPM quirk of ISOC on AMD SB800 */
-static struct pci_dev *amd_nb_dev;
-
 /*-------------------------------------------------------------------------*/
 
 #include "ehci.h"
 #include "ehci-dbg.c"
+#include "pci-quirks.h"
 
 /*-------------------------------------------------------------------------*/
 
@@ -532,10 +530,8 @@ static void ehci_stop (struct usb_hcd *hcd)
 	spin_unlock_irq (&ehci->lock);
 	ehci_mem_cleanup (ehci);
 
-	if (amd_nb_dev) {
-		pci_dev_put(amd_nb_dev);
-		amd_nb_dev = NULL;
-	}
+	if (ehci->amd_pll_fix == 1)
+		usb_amd_dev_put();
 
 #ifdef	EHCI_STATS
 	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
@@ -679,7 +675,12 @@ static int ehci_run (struct usb_hcd *hcd)
 	hcd->uses_new_polling = 1;
 
 	/* EHCI spec section 4.1 */
-	if ((retval = ehci_reset(ehci)) != 0) {
+	/*
+	 * TDI driver does the ehci_reset in their reset callback.
+	 * Don't reset here, because configuration settings will
+	 * vanish.
+	 */
+	if (!ehci_is_TDI(ehci) && (retval = ehci_reset(ehci)) != 0) {
 		ehci_mem_cleanup(ehci);
 		return retval;
 	}
@@ -1179,7 +1180,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_mxc_driver
 #endif
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7786
+#ifdef CONFIG_USB_EHCI_SH
 #include "ehci-sh.c"
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
 #endif
@@ -1254,6 +1255,16 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_msm_driver
 #endif
 
+#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
+#include "ehci-pmcmsp.c"
+#define	PLATFORM_DRIVER		ehci_hcd_msp_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+#include "ehci-tegra.c"
+#define PLATFORM_DRIVER		tegra_ehci_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 8a515f0..d05ea03 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -106,6 +106,27 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 	ehci->owned_ports = 0;
 }
 
+static int ehci_port_change(struct ehci_hcd *ehci)
+{
+	int i = HCS_N_PORTS(ehci->hcs_params);
+
+	/* First check if the controller indicates a change event */
+
+	if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
+		return 1;
+
+	/*
+	 * Not all controllers appear to update this while going from D3 to D0,
+	 * so check the individual port status registers as well
+	 */
+
+	while (i--)
+		if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
+			return 1;
+
+	return 0;
+}
+
 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 		bool suspending, bool do_wakeup)
 {
@@ -173,7 +194,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	}
 
 	/* Does the root hub have a port wakeup pending? */
-	if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+	if (!suspending && ehci_port_change(ehci))
 		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
 
 	spin_unlock_irqrestore(&ehci->lock, flags);
@@ -538,14 +559,15 @@ static ssize_t store_companion(struct device *dev,
 }
 static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
 
-static inline void create_companion_file(struct ehci_hcd *ehci)
+static inline int create_companion_file(struct ehci_hcd *ehci)
 {
-	int	i;
+	int	i = 0;
 
 	/* with integrated TT there is no companion! */
 	if (!ehci_is_TDI(ehci))
 		i = device_create_file(ehci_to_hcd(ehci)->self.controller,
 				       &dev_attr_companion);
+	return i;
 }
 
 static inline void remove_companion_file(struct ehci_hcd *ehci)
@@ -695,8 +717,8 @@ ehci_hub_descriptor (
 	desc->bDescLength = 7 + 2 * temp;
 
 	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset (&desc->bitmap [0], 0, temp);
-	memset (&desc->bitmap [temp], 0xff, temp);
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
 
 	temp = 0x0008;			/* per-port overcurrent reporting */
 	if (HCS_PPC (ehci->hcs_params))
diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c
index b4d4d63..2111627 100644
--- a/drivers/usb/host/ehci-lpm.c
+++ b/drivers/usb/host/ehci-lpm.c
@@ -17,7 +17,8 @@
 */
 
 /* this file is part of ehci-hcd.c */
-static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
+static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci,
+	int dev_addr, int port_num)
 {
 	u32 __iomem portsc;
 
@@ -37,7 +38,7 @@ static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
  * this function is used to check if the device support LPM
  * if yes, mark the PORTSC register with PORT_LPM bit
  */
-static int ehci_lpm_check(struct ehci_hcd *ehci, int port)
+static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port)
 {
 	u32 __iomem	*portsc ;
 	u32 val32;
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 413f4de..9ce1b0b 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -1,6 +1,6 @@
 /* ehci-msm.c - HSUSB Host Controller Driver Implementation
  *
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
  *
  * Partly derived from ehci-fsl.c and ehci-hcd.c
  * Copyright (c) 2000-2004 by David Brownell
@@ -34,92 +34,6 @@
 
 static struct otg_transceiver *otg;
 
-/*
- * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and
- * the configuration settings in ehci_msm_reset vanish after controller is
- * reset. Resetting the controler in ehci_run seems to be un-necessary
- * provided HCD reset the controller before calling ehci_run. Most of the HCD
- * do but some are not. So this function is same as ehci_run but we don't
- * reset the controller here.
- */
-static int ehci_msm_run(struct usb_hcd *hcd)
-{
-	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
-	u32			temp;
-	u32			hcc_params;
-
-	hcd->uses_new_polling = 1;
-
-	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
-	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
-
-	/*
-	 * hcc_params controls whether ehci->regs->segment must (!!!)
-	 * be used; it constrains QH/ITD/SITD and QTD locations.
-	 * pci_pool consistent memory always uses segment zero.
-	 * streaming mappings for I/O buffers, like pci_map_single(),
-	 * can return segments above 4GB, if the device allows.
-	 *
-	 * NOTE:  the dma mask is visible through dma_supported(), so
-	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
-	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
-	 * host side drivers though.
-	 */
-	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
-	if (HCC_64BIT_ADDR(hcc_params))
-		ehci_writel(ehci, 0, &ehci->regs->segment);
-
-	/*
-	 * Philips, Intel, and maybe others need CMD_RUN before the
-	 * root hub will detect new devices (why?); NEC doesn't
-	 */
-	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
-	ehci->command |= CMD_RUN;
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	dbg_cmd(ehci, "init", ehci->command);
-
-	/*
-	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
-	 * are explicitly handed to companion controller(s), so no TT is
-	 * involved with the root hub.  (Except where one is integrated,
-	 * and there's no companion controller unless maybe for USB OTG.)
-	 *
-	 * Turning on the CF flag will transfer ownership of all ports
-	 * from the companions to the EHCI controller.  If any of the
-	 * companions are in the middle of a port reset at the time, it
-	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
-	 * guarantees that no resets are in progress.  After we set CF,
-	 * a short delay lets the hardware catch up; new resets shouldn't
-	 * be started before the port switching actions could complete.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	hcd->state = HC_STATE_RUNNING;
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
-	usleep_range(5000, 5500);
-	up_write(&ehci_cf_port_reset_rwsem);
-	ehci->last_periodic_enable = ktime_get_real();
-
-	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
-	ehci_info(ehci,
-		"USB %x.%x started, EHCI %x.%02x%s\n",
-		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-		temp >> 8, temp & 0xff,
-		ignore_oc ? ", overcurrent ignored" : "");
-
-	ehci_writel(ehci, INTR_MASK,
-		    &ehci->regs->intr_enable); /* Turn On Interrupts */
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	create_debug_files(ehci);
-	create_companion_file(ehci);
-
-	return 0;
-}
-
 static int ehci_msm_reset(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -128,6 +42,8 @@ static int ehci_msm_reset(struct usb_hcd *hcd)
 	ehci->caps = USB_CAPLENGTH;
 	ehci->regs = USB_CAPLENGTH +
 		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
 
 	/* cache the data to minimize the chip reads*/
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
@@ -135,6 +51,10 @@ static int ehci_msm_reset(struct usb_hcd *hcd)
 	hcd->has_tt = 1;
 	ehci->sbrn = HCD_USB2;
 
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
 	/* data structure init */
 	retval = ehci_init(hcd);
 	if (retval)
@@ -167,7 +87,7 @@ static struct hc_driver msm_hc_driver = {
 	.flags			= HCD_USB2 | HCD_MEMORY,
 
 	.reset			= ehci_msm_reset,
-	.start			= ehci_msm_run,
+	.start			= ehci_run,
 
 	.stop			= ehci_stop,
 	.shutdown		= ehci_shutdown,
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index f784ceb..7e41a95 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -4,9 +4,10 @@
  * Bus Glue for the EHCI controllers in OMAP3/4
  * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
  *	Author: Vikram Pandita <vikram.pandita@ti.com>
  *	Author: Anand Gadiyar <gadiyar@ti.com>
+ *	Author: Keshava Munegowda <keshava_mgowda@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -27,116 +28,19 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Nov 21, 2010):
+ * TODO (last updated Feb 27, 2010):
  *	- add kernel-doc
  *	- enable AUTOIDLE
  *	- add suspend/resume
- *	- move workarounds to board-files
- *	- factor out code common to OHCI
  *	- add HSIC and TLL support
  *	- convert to use hwmod and runtime PM
  */
 
 #include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
 
-/*
- * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
- *	Use ehci_omap_readl()/ehci_omap_writel() functions
- */
-
-/* TLL Register Set */
-#define	OMAP_USBTLL_REVISION				(0x00)
-#define	OMAP_USBTLL_SYSCONFIG				(0x10)
-#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
-#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
-#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
-#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
-#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define	OMAP_USBTLL_SYSSTATUS				(0x14)
-#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
-
-#define	OMAP_USBTLL_IRQSTATUS				(0x18)
-#define	OMAP_USBTLL_IRQENABLE				(0x1C)
-
-#define	OMAP_TLL_SHARED_CONF				(0x30)
-#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
-#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
-#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
-#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
-#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
-
-#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
-#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
-#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
-#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
-#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
-#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
-
-#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
-#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
-#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
-#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
-#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
-#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
-#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
-#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
-#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
-
-#define OMAP_TLL_CHANNEL_COUNT				3
-#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
-#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
-#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
-
-/* UHH Register Set */
-#define	OMAP_UHH_REVISION				(0x00)
-#define	OMAP_UHH_SYSCONFIG				(0x10)
-#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
-#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
-#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
-#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
-#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
-#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define	OMAP_UHH_SYSSTATUS				(0x14)
-#define	OMAP_UHH_HOSTCONFIG				(0x40)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
-#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
-#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
-#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
-#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
-#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
-#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
-#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
-
-/* OMAP4-specific defines */
-#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
-#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
-
-#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
-#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
-#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
-
-#define OMAP4_P1_MODE_CLEAR				(3 << 16)
-#define OMAP4_P1_MODE_TLL				(1 << 16)
-#define OMAP4_P1_MODE_HSIC				(3 << 16)
-#define OMAP4_P2_MODE_CLEAR				(3 << 18)
-#define OMAP4_P2_MODE_TLL				(1 << 18)
-#define OMAP4_P2_MODE_HSIC				(3 << 18)
-
-#define OMAP_REV2_TLL_CHANNEL_COUNT			2
-
-#define	OMAP_UHH_DEBUG_CSR				(0x44)
-
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
@@ -148,137 +52,24 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
-/* Values of UHH_REVISION - Note: these are not given in the TRM */
-#define OMAP_EHCI_REV1	0x00000010	/* OMAP3 */
-#define OMAP_EHCI_REV2	0x50700100	/* OMAP4 */
-
-#define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
-#define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
+/*-------------------------------------------------------------------------*/
 
-#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
-#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
-#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+static const struct hc_driver ehci_omap_hc_driver;
 
-/*-------------------------------------------------------------------------*/
 
-static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
+static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
 {
 	__raw_writel(val, base + reg);
 }
 
-static inline u32 ehci_omap_readl(void __iomem *base, u32 reg)
+static inline u32 ehci_read(void __iomem *base, u32 reg)
 {
 	return __raw_readl(base + reg);
 }
 
-static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val)
-{
-	__raw_writeb(val, base + reg);
-}
-
-static inline u8 ehci_omap_readb(void __iomem *base, u8 reg)
-{
-	return __raw_readb(base + reg);
-}
-
-/*-------------------------------------------------------------------------*/
-
-struct ehci_hcd_omap {
-	struct ehci_hcd		*ehci;
-	struct device		*dev;
-
-	struct clk		*usbhost_ick;
-	struct clk		*usbhost_hs_fck;
-	struct clk		*usbhost_fs_fck;
-	struct clk		*usbtll_fck;
-	struct clk		*usbtll_ick;
-	struct clk		*xclk60mhsp1_ck;
-	struct clk		*xclk60mhsp2_ck;
-	struct clk		*utmi_p1_fck;
-	struct clk		*utmi_p2_fck;
-
-	/* FIXME the following two workarounds are
-	 * board specific not silicon-specific so these
-	 * should be moved to board-file instead.
-	 *
-	 * Maybe someone from TI will know better which
-	 * board is affected and needs the workarounds
-	 * to be applied
-	 */
-
-	/* gpio for resetting phy */
-	int			reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* phy reset workaround */
-	int			phy_reset;
-
-	/* IP revision */
-	u32			omap_ehci_rev;
-
-	/* desired phy_mode: TLL, PHY */
-	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	void __iomem		*uhh_base;
-	void __iomem		*tll_base;
-	void __iomem		*ehci_base;
-
-	/* Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator        *regulator[OMAP3_HS_USB_PORTS];
-};
-
-/*-------------------------------------------------------------------------*/
-
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
-				u8 tll_channel_count)
-{
-	unsigned reg;
-	int i;
-
-	/* Program the 3 TLL channels upfront */
-	for (i = 0; i < tll_channel_count; i++) {
-		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
-
-		/* Disable AutoIdle, BitStuffing and use SDR Mode */
-		reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
-				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
-				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
-		ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
-	}
-
-	/* Program Common TLL register */
-	reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
-	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
-			| OMAP_TLL_SHARED_CONF_USB_DIVRATION
-			| OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN);
-	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
-
-	ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
-
-	/* Enable channels now */
-	for (i = 0; i < tll_channel_count; i++) {
-		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
-
-		/* Enable only the reg that is needed */
-		if (!(tll_channel_mask & 1<<i))
-			continue;
-
-		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
-		ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
-
-		ehci_omap_writeb(omap->tll_base,
-				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
-		dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n",
-				i+1, ehci_omap_readb(omap->tll_base,
-				OMAP_TLL_ULPI_SCRATCH_REGISTER(i)));
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port)
+static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
 {
+	struct usb_hcd	*hcd = dev_get_drvdata(&pdev->dev);
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	unsigned reg = 0;
 
@@ -292,266 +83,87 @@ static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port)
 		/* start ULPI access*/
 		| (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
 
-	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg);
+	ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg);
 
 	/* Wait for ULPI access completion */
-	while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI)
+	while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI)
 			& (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
 		cpu_relax();
 
 		if (time_after(jiffies, timeout)) {
-			dev_dbg(omap->dev, "phy reset operation timed out\n");
+			dev_dbg(&pdev->dev, "phy reset operation timed out\n");
 			break;
 		}
 	}
 }
 
-/* omap_start_ehc
- *	- Start the TI USBHOST controller
- */
-static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-	u8 tll_ch_mask = 0;
-	unsigned reg = 0;
-	int ret = 0;
-
-	dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
 
-	/* Enable Clocks for USBHOST */
-	omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
-	if (IS_ERR(omap->usbhost_ick)) {
-		ret =  PTR_ERR(omap->usbhost_ick);
-		goto err_host_ick;
-	}
-	clk_enable(omap->usbhost_ick);
-
-	omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
-	if (IS_ERR(omap->usbhost_hs_fck)) {
-		ret = PTR_ERR(omap->usbhost_hs_fck);
-		goto err_host_120m_fck;
-	}
-	clk_enable(omap->usbhost_hs_fck);
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
 
-	omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
-	if (IS_ERR(omap->usbhost_fs_fck)) {
-		ret = PTR_ERR(omap->usbhost_fs_fck);
-		goto err_host_48m_fck;
-	}
-	clk_enable(omap->usbhost_fs_fck);
-
-	if (omap->phy_reset) {
-		/* Refer: ISSUE1 */
-		if (gpio_is_valid(omap->reset_gpio_port[0])) {
-			gpio_request(omap->reset_gpio_port[0],
-						"USB1 PHY reset");
-			gpio_direction_output(omap->reset_gpio_port[0], 0);
-		}
+/**
+ * ehci_hcd_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int ehci_hcd_omap_probe(struct platform_device *pdev)
+{
+	struct device				*dev = &pdev->dev;
+	struct ehci_hcd_omap_platform_data	*pdata = dev->platform_data;
+	struct resource				*res;
+	struct usb_hcd				*hcd;
+	void __iomem				*regs;
+	struct ehci_hcd				*omap_ehci;
+	int					ret = -ENODEV;
+	int					irq;
 
-		if (gpio_is_valid(omap->reset_gpio_port[1])) {
-			gpio_request(omap->reset_gpio_port[1],
-						"USB2 PHY reset");
-			gpio_direction_output(omap->reset_gpio_port[1], 0);
-		}
+	if (usb_disabled())
+		return -ENODEV;
 
-		/* Hold the PHY in RESET for enough time till DIR is high */
-		udelay(10);
+	if (!dev->parent) {
+		dev_err(dev, "Missing parent device\n");
+		return -ENODEV;
 	}
 
-	/* Configure TLL for 60Mhz clk for ULPI */
-	omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
-	if (IS_ERR(omap->usbtll_fck)) {
-		ret = PTR_ERR(omap->usbtll_fck);
-		goto err_tll_fck;
+	irq = platform_get_irq_byname(pdev, "ehci-irq");
+	if (irq < 0) {
+		dev_err(dev, "EHCI irq failed\n");
+		return -ENODEV;
 	}
-	clk_enable(omap->usbtll_fck);
 
-	omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
-	if (IS_ERR(omap->usbtll_ick)) {
-		ret = PTR_ERR(omap->usbtll_ick);
-		goto err_tll_ick;
+	res =  platform_get_resource_byname(pdev,
+				IORESOURCE_MEM, "ehci");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		return -ENODEV;
 	}
-	clk_enable(omap->usbtll_ick);
-
-	omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
-						OMAP_UHH_REVISION);
-	dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
-					omap->omap_ehci_rev);
 
-	/*
-	 * Enable per-port clocks as needed (newer controllers only).
-	 * - External ULPI clock for PHY mode
-	 * - Internal clocks for TLL and HSIC modes (TODO)
-	 */
-	if (is_omap_ehci_rev2(omap)) {
-		switch (omap->port_mode[0]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
-			omap->xclk60mhsp1_ck = clk_get(omap->dev,
-							"xclk60mhsp1_ck");
-			if (IS_ERR(omap->xclk60mhsp1_ck)) {
-				ret = PTR_ERR(omap->xclk60mhsp1_ck);
-				dev_err(omap->dev,
-					"Unable to get Port1 ULPI clock\n");
-			}
-
-			omap->utmi_p1_fck = clk_get(omap->dev,
-							"utmi_p1_gfclk");
-			if (IS_ERR(omap->utmi_p1_fck)) {
-				ret = PTR_ERR(omap->utmi_p1_fck);
-				dev_err(omap->dev,
-					"Unable to get utmi_p1_fck\n");
-			}
-
-			ret = clk_set_parent(omap->utmi_p1_fck,
-						omap->xclk60mhsp1_ck);
-			if (ret != 0) {
-				dev_err(omap->dev,
-					"Unable to set P1 f-clock\n");
-			}
-			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
-			/* TODO */
-		default:
-			break;
-		}
-		switch (omap->port_mode[1]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
-			omap->xclk60mhsp2_ck = clk_get(omap->dev,
-							"xclk60mhsp2_ck");
-			if (IS_ERR(omap->xclk60mhsp2_ck)) {
-				ret = PTR_ERR(omap->xclk60mhsp2_ck);
-				dev_err(omap->dev,
-					"Unable to get Port2 ULPI clock\n");
-			}
-
-			omap->utmi_p2_fck = clk_get(omap->dev,
-							"utmi_p2_gfclk");
-			if (IS_ERR(omap->utmi_p2_fck)) {
-				ret = PTR_ERR(omap->utmi_p2_fck);
-				dev_err(omap->dev,
-					"Unable to get utmi_p2_fck\n");
-			}
-
-			ret = clk_set_parent(omap->utmi_p2_fck,
-						omap->xclk60mhsp2_ck);
-			if (ret != 0) {
-				dev_err(omap->dev,
-					"Unable to set P2 f-clock\n");
-			}
-			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
-			/* TODO */
-		default:
-			break;
-		}
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(dev, "UHH EHCI ioremap failed\n");
+		return -ENOMEM;
 	}
 
-
-	/* perform TLL soft reset, and wait until reset is complete */
-	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
-	/* Wait for TLL reset to complete */
-	while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout)) {
-			dev_dbg(omap->dev, "operation timed out\n");
-			ret = -EINVAL;
-			goto err_sys_status;
-		}
+	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
+			dev_name(dev));
+	if (!hcd) {
+		dev_err(dev, "failed to create hcd with err %d\n", ret);
+		ret = -ENOMEM;
+		goto err_io;
 	}
 
-	dev_dbg(omap->dev, "TLL RESET DONE\n");
-
-	/* (1<<3) = no idle mode only for initial debugging */
-	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
-			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
-			OMAP_USBTLL_SYSCONFIG_CACTIVITY);
-
-
-	/* Put UHH in NoIdle/NoStandby mode */
-	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-	if (is_omap_ehci_rev1(omap)) {
-		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-				| OMAP_UHH_SYSCONFIG_SIDLEMODE
-				| OMAP_UHH_SYSCONFIG_CACTIVITY
-				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
-		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
 
-	} else if (is_omap_ehci_rev2(omap)) {
-		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
-		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
-		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
-		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
-	}
-	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
-	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
-
-	/* setup ULPI bypass and burst configurations */
-	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
-			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
-			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
-	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
-
-	if (is_omap_ehci_rev1(omap)) {
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-		/* Bypass the TLL module for PHY mode operation */
-		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
-			dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-			if (is_ehci_phy_mode(omap->port_mode[0]) ||
-				is_ehci_phy_mode(omap->port_mode[1]) ||
-					is_ehci_phy_mode(omap->port_mode[2]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-			else
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-		} else {
-			dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-			if (is_ehci_phy_mode(omap->port_mode[0]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-			else if (is_ehci_tll_mode(omap->port_mode[0]))
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
-			if (is_ehci_phy_mode(omap->port_mode[1]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-			else if (is_ehci_tll_mode(omap->port_mode[1]))
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
-			if (is_ehci_phy_mode(omap->port_mode[2]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-			else if (is_ehci_tll_mode(omap->port_mode[2]))
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		}
-	} else if (is_omap_ehci_rev2(omap)) {
-		/* Clear port mode fields for PHY mode*/
-		reg &= ~OMAP4_P1_MODE_CLEAR;
-		reg &= ~OMAP4_P2_MODE_CLEAR;
-
-		if (is_ehci_tll_mode(omap->port_mode[0]))
-			reg |= OMAP4_P1_MODE_TLL;
-		else if (is_ehci_hsic_mode(omap->port_mode[0]))
-			reg |= OMAP4_P1_MODE_HSIC;
-
-		if (is_ehci_tll_mode(omap->port_mode[1]))
-			reg |= OMAP4_P2_MODE_TLL;
-		else if (is_ehci_hsic_mode(omap->port_mode[1]))
-			reg |= OMAP4_P2_MODE_HSIC;
+	ret = omap_usbhs_enable(dev);
+	if (ret) {
+		dev_err(dev, "failed to start usbhs with err %d\n", ret);
+		goto err_enable;
 	}
 
-	ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
-	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
-
-
 	/*
 	 * An undocumented "feature" in the OMAP3 EHCI controller,
 	 * causes suspended ports to be taken out of suspend when
@@ -561,363 +173,50 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	 * to suspend. Writing 1 to this undocumented register bit
 	 * disables this feature and restores normal behavior.
 	 */
-	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04,
+	ehci_write(regs, EHCI_INSNREG04,
 				EHCI_INSNREG04_DISABLE_UNSUSPEND);
 
-	if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
-		(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
-			(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
-
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
-			tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
-			tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
-			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
-
-		/* Enable UTMI mode for required TLL channels */
-		omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
-	}
-
-	if (omap->phy_reset) {
-		/* Refer ISSUE1:
-		 * Hold the PHY in RESET for enough time till
-		 * PHY is settled and ready
-		 */
-		udelay(10);
-
-		if (gpio_is_valid(omap->reset_gpio_port[0]))
-			gpio_set_value(omap->reset_gpio_port[0], 1);
-
-		if (gpio_is_valid(omap->reset_gpio_port[1]))
-			gpio_set_value(omap->reset_gpio_port[1], 1);
-	}
-
 	/* Soft reset the PHY using PHY reset command over ULPI */
-	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
-		omap_ehci_soft_phy_reset(omap, 0);
-	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
-		omap_ehci_soft_phy_reset(omap, 1);
-
-	return 0;
-
-err_sys_status:
-	clk_disable(omap->utmi_p2_fck);
-	clk_put(omap->utmi_p2_fck);
-	clk_disable(omap->xclk60mhsp2_ck);
-	clk_put(omap->xclk60mhsp2_ck);
-	clk_disable(omap->utmi_p1_fck);
-	clk_put(omap->utmi_p1_fck);
-	clk_disable(omap->xclk60mhsp1_ck);
-	clk_put(omap->xclk60mhsp1_ck);
-	clk_disable(omap->usbtll_ick);
-	clk_put(omap->usbtll_ick);
-
-err_tll_ick:
-	clk_disable(omap->usbtll_fck);
-	clk_put(omap->usbtll_fck);
-
-err_tll_fck:
-	clk_disable(omap->usbhost_fs_fck);
-	clk_put(omap->usbhost_fs_fck);
-
-	if (omap->phy_reset) {
-		if (gpio_is_valid(omap->reset_gpio_port[0]))
-			gpio_free(omap->reset_gpio_port[0]);
-
-		if (gpio_is_valid(omap->reset_gpio_port[1]))
-			gpio_free(omap->reset_gpio_port[1]);
-	}
-
-err_host_48m_fck:
-	clk_disable(omap->usbhost_hs_fck);
-	clk_put(omap->usbhost_hs_fck);
+	if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
+		omap_ehci_soft_phy_reset(pdev, 0);
+	if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
+		omap_ehci_soft_phy_reset(pdev, 1);
 
-err_host_120m_fck:
-	clk_disable(omap->usbhost_ick);
-	clk_put(omap->usbhost_ick);
-
-err_host_ick:
-	return ret;
-}
-
-static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-
-	dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
-
-	/* Reset OMAP modules for insmod/rmmod to work */
-	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
-			is_omap_ehci_rev2(omap) ?
-			OMAP4_UHH_SYSCONFIG_SOFTRESET :
-			OMAP_UHH_SYSCONFIG_SOFTRESET);
-	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 0))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 1))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 2))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
-
-	while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-				& (1 << 0))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	if (omap->usbtll_fck != NULL) {
-		clk_disable(omap->usbtll_fck);
-		clk_put(omap->usbtll_fck);
-		omap->usbtll_fck = NULL;
-	}
-
-	if (omap->usbhost_ick != NULL) {
-		clk_disable(omap->usbhost_ick);
-		clk_put(omap->usbhost_ick);
-		omap->usbhost_ick = NULL;
-	}
-
-	if (omap->usbhost_fs_fck != NULL) {
-		clk_disable(omap->usbhost_fs_fck);
-		clk_put(omap->usbhost_fs_fck);
-		omap->usbhost_fs_fck = NULL;
-	}
-
-	if (omap->usbhost_hs_fck != NULL) {
-		clk_disable(omap->usbhost_hs_fck);
-		clk_put(omap->usbhost_hs_fck);
-		omap->usbhost_hs_fck = NULL;
-	}
-
-	if (omap->usbtll_ick != NULL) {
-		clk_disable(omap->usbtll_ick);
-		clk_put(omap->usbtll_ick);
-		omap->usbtll_ick = NULL;
-	}
-
-	if (is_omap_ehci_rev2(omap)) {
-		if (omap->xclk60mhsp1_ck != NULL) {
-			clk_disable(omap->xclk60mhsp1_ck);
-			clk_put(omap->xclk60mhsp1_ck);
-			omap->xclk60mhsp1_ck = NULL;
-		}
-
-		if (omap->utmi_p1_fck != NULL) {
-			clk_disable(omap->utmi_p1_fck);
-			clk_put(omap->utmi_p1_fck);
-			omap->utmi_p1_fck = NULL;
-		}
-
-		if (omap->xclk60mhsp2_ck != NULL) {
-			clk_disable(omap->xclk60mhsp2_ck);
-			clk_put(omap->xclk60mhsp2_ck);
-			omap->xclk60mhsp2_ck = NULL;
-		}
-
-		if (omap->utmi_p2_fck != NULL) {
-			clk_disable(omap->utmi_p2_fck);
-			clk_put(omap->utmi_p2_fck);
-			omap->utmi_p2_fck = NULL;
-		}
-	}
-
-	if (omap->phy_reset) {
-		if (gpio_is_valid(omap->reset_gpio_port[0]))
-			gpio_free(omap->reset_gpio_port[0]);
-
-		if (gpio_is_valid(omap->reset_gpio_port[1]))
-			gpio_free(omap->reset_gpio_port[1]);
-	}
-
-	dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ehci_omap_hc_driver;
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-/**
- * ehci_hcd_omap_probe - initialize TI-based HCDs
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- */
-static int ehci_hcd_omap_probe(struct platform_device *pdev)
-{
-	struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
-	struct ehci_hcd_omap *omap;
-	struct resource *res;
-	struct usb_hcd *hcd;
-
-	int irq = platform_get_irq(pdev, 0);
-	int ret = -ENODEV;
-	int i;
-	char supply[7];
-
-	if (!pdata) {
-		dev_dbg(&pdev->dev, "missing platform_data\n");
-		goto err_pdata;
-	}
-
-	if (usb_disabled())
-		goto err_disabled;
-
-	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
-	if (!omap) {
-		ret = -ENOMEM;
-		goto err_disabled;
-	}
-
-	hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
-			dev_name(&pdev->dev));
-	if (!hcd) {
-		dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
-		ret = -ENOMEM;
-		goto err_create_hcd;
-	}
-
-	platform_set_drvdata(pdev, omap);
-	omap->dev		= &pdev->dev;
-	omap->phy_reset		= pdata->phy_reset;
-	omap->reset_gpio_port[0]	= pdata->reset_gpio_port[0];
-	omap->reset_gpio_port[1]	= pdata->reset_gpio_port[1];
-	omap->reset_gpio_port[2]	= pdata->reset_gpio_port[2];
-	omap->port_mode[0]		= pdata->port_mode[0];
-	omap->port_mode[1]		= pdata->port_mode[1];
-	omap->port_mode[2]		= pdata->port_mode[2];
-	omap->ehci		= hcd_to_ehci(hcd);
-	omap->ehci->sbrn	= 0x20;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		dev_err(&pdev->dev, "EHCI ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
+	omap_ehci = hcd_to_ehci(hcd);
+	omap_ehci->sbrn = 0x20;
 
 	/* we know this is the memory we want, no need to ioremap again */
-	omap->ehci->caps = hcd->regs;
-	omap->ehci_base = hcd->regs;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	omap->uhh_base = ioremap(res->start, resource_size(res));
-	if (!omap->uhh_base) {
-		dev_err(&pdev->dev, "UHH ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_uhh_ioremap;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	omap->tll_base = ioremap(res->start, resource_size(res));
-	if (!omap->tll_base) {
-		dev_err(&pdev->dev, "TLL ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_tll_ioremap;
-	}
-
-	/* get ehci regulator and enable */
-	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-		if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
-			omap->regulator[i] = NULL;
-			continue;
-		}
-		snprintf(supply, sizeof(supply), "hsusb%d", i);
-		omap->regulator[i] = regulator_get(omap->dev, supply);
-		if (IS_ERR(omap->regulator[i])) {
-			omap->regulator[i] = NULL;
-			dev_dbg(&pdev->dev,
-			"failed to get ehci port%d regulator\n", i);
-		} else {
-			regulator_enable(omap->regulator[i]);
-		}
-	}
-
-	ret = omap_start_ehc(omap, hcd);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
-		goto err_start;
-	}
+	omap_ehci->caps = hcd->regs;
+	omap_ehci->regs = hcd->regs
+			+ HC_LENGTH(readl(&omap_ehci->caps->hc_capbase));
 
-	omap->ehci->regs = hcd->regs
-		+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
-
-	dbg_hcs_params(omap->ehci, "reset");
-	dbg_hcc_params(omap->ehci, "reset");
+	dbg_hcs_params(omap_ehci, "reset");
+	dbg_hcc_params(omap_ehci, "reset");
 
 	/* cache this readonly data; minimize chip reads */
-	omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
+	omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		dev_err(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
 	}
 
 	/* root ports should always stay powered */
-	ehci_port_power(omap->ehci, 1);
+	ehci_port_power(omap_ehci, 1);
 
 	return 0;
 
 err_add_hcd:
-	omap_stop_ehc(omap, hcd);
+	omap_usbhs_disable(dev);
 
-err_start:
-	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-		if (omap->regulator[i]) {
-			regulator_disable(omap->regulator[i]);
-			regulator_put(omap->regulator[i]);
-		}
-	}
-	iounmap(omap->tll_base);
-
-err_tll_ioremap:
-	iounmap(omap->uhh_base);
-
-err_uhh_ioremap:
-	iounmap(hcd->regs);
-
-err_ioremap:
+err_enable:
 	usb_put_hcd(hcd);
 
-err_create_hcd:
-	kfree(omap);
-err_disabled:
-err_pdata:
+err_io:
 	return ret;
 }
 
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
 
 /**
  * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
@@ -929,31 +228,18 @@ err_pdata:
  */
 static int ehci_hcd_omap_remove(struct platform_device *pdev)
 {
-	struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
-	int i;
+	struct device *dev	= &pdev->dev;
+	struct usb_hcd *hcd	= dev_get_drvdata(dev);
 
 	usb_remove_hcd(hcd);
-	omap_stop_ehc(omap, hcd);
-	iounmap(hcd->regs);
-	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-		if (omap->regulator[i]) {
-			regulator_disable(omap->regulator[i]);
-			regulator_put(omap->regulator[i]);
-		}
-	}
-	iounmap(omap->tll_base);
-	iounmap(omap->uhh_base);
+	omap_usbhs_disable(dev);
 	usb_put_hcd(hcd);
-	kfree(omap);
-
 	return 0;
 }
 
 static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
 {
-	struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
+	struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
 
 	if (hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 0f87dc7..281e094 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,7 +105,8 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 
-	ehci_reset(ehci);
+	hcd->has_tt = 1;
+
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -117,7 +118,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
-	hcd->has_tt = 1;
+	ehci_reset(ehci);
 
 	ehci_port_power(ehci, 0);
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 07bb982..d5eaea7 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -44,42 +44,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
-static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
-{
-	struct pci_dev *amd_smbus_dev;
-	u8 rev = 0;
-
-	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (amd_smbus_dev) {
-		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-		if (rev < 0x40) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-			return 0;
-		}
-	} else {
-		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
-		if (!amd_smbus_dev)
-			return 0;
-		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-		if (rev < 0x11 || rev > 0x18) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-			return 0;
-		}
-	}
-
-	if (!amd_nb_dev)
-		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
-
-	ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
-
-	pci_dev_put(amd_smbus_dev);
-	amd_smbus_dev = NULL;
-
-	return 1;
-}
-
 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
@@ -138,9 +102,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	if (ehci_quirk_amd_hudson(ehci))
-		ehci->amd_l1_fix = 1;
-
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -191,6 +152,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_AMD:
+		/* AMD PLL quirk */
+		if (usb_amd_find_chipset_info())
+			ehci->amd_pll_fix = 1;
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
 			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
@@ -236,6 +200,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_ATI:
+		/* AMD PLL quirk */
+		if (usb_amd_find_chipset_info())
+			ehci->amd_pll_fix = 1;
 		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
new file mode 100644
index 0000000..a216864
--- /dev/null
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -0,0 +1,383 @@
+/*
+ * PMC MSP EHCI (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 2006-2010 PMC-Sierra Inc
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+/* includes */
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/usb.h>
+#include <msp_usb.h>
+
+/* stream disable*/
+#define USB_CTRL_MODE_STREAM_DISABLE	0x10
+
+/* threshold */
+#define USB_CTRL_FIFO_THRESH		0x00300000
+
+/* register offset for usb_mode */
+#define USB_EHCI_REG_USB_MODE		0x68
+
+/* register offset for usb fifo */
+#define USB_EHCI_REG_USB_FIFO		0x24
+
+/* register offset for usb status */
+#define USB_EHCI_REG_USB_STATUS		0x44
+
+/* serial/parallel transceiver */
+#define USB_EHCI_REG_BIT_STAT_STS	(1<<29)
+
+/* TWI USB0 host device pin */
+#define MSP_PIN_USB0_HOST_DEV		49
+
+/* TWI USB1 host device pin */
+#define MSP_PIN_USB1_HOST_DEV		50
+
+
+static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
+{
+	u8 *base;
+	u8 *statreg;
+	u8 *fiforeg;
+	u32 val;
+	struct ehci_regs *reg_base = ehci->regs;
+
+	/* get register base */
+	base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
+	statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
+	fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
+
+	/* Disable controller mode stream */
+	val = ehci_readl(ehci, (u32 *)base);
+	ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
+			(u32 *)base);
+
+	/* clear STS to select parallel transceiver interface */
+	val = ehci_readl(ehci, (u32 *)statreg);
+	val = val & ~USB_EHCI_REG_BIT_STAT_STS;
+	ehci_writel(ehci, val, (u32 *)statreg);
+
+	/* write to set the proper fifo threshold */
+	ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
+
+	/* set TWI GPIO USB_HOST_DEV pin high */
+	gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+	gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
+#endif
+}
+
+/* called during probe() after chip reset completes */
+static int ehci_msp_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	int			retval;
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+			HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	hcd->has_tt = 1;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	usb_hcd_tdi_set_mode(ehci);
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+
+/* configure so an HC device and id are always provided
+ * always called with process context; sleeping is OK
+ */
+
+static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
+{
+	struct resource *res;
+	struct platform_device *pdev = &dev->dev;
+	u32 res_len;
+	int retval;
+
+	/* MAB register space */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res == NULL)
+		return -ENOMEM;
+	res_len = res->end - res->start + 1;
+	if (!request_mem_region(res->start, res_len, "mab regs"))
+		return -EBUSY;
+
+	dev->mab_regs = ioremap_nocache(res->start, res_len);
+	if (dev->mab_regs == NULL) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	/* MSP USB register space */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (res == NULL) {
+		retval = -ENOMEM;
+		goto err2;
+	}
+	res_len = res->end - res->start + 1;
+	if (!request_mem_region(res->start, res_len, "usbid regs")) {
+		retval = -EBUSY;
+		goto err2;
+	}
+	dev->usbid_regs = ioremap_nocache(res->start, res_len);
+	if (dev->usbid_regs == NULL) {
+		retval = -ENOMEM;
+		goto err3;
+	}
+
+	return 0;
+err3:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	res_len = res->end - res->start + 1;
+	release_mem_region(res->start, res_len);
+err2:
+	iounmap(dev->mab_regs);
+err1:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	res_len = res->end - res->start + 1;
+	release_mem_region(res->start, res_len);
+	dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
+	return retval;
+}
+
+/**
+ * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_msp_probe(const struct hc_driver *driver,
+			  struct platform_device *dev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+	struct resource *res;
+	struct ehci_hcd		*ehci ;
+
+	hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		pr_debug("No IOMEM resource info for %s.\n", dev->name);
+		retval = -ENOMEM;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
+		retval = -EBUSY;
+		goto err1;
+	}
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
+		retval = -ENOMEM;
+		goto err3;
+	}
+
+	/* Map non-EHCI register spaces */
+	retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
+	if (retval != 0)
+		goto err3;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+
+
+	retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
+	if (retval == 0)
+		return 0;
+
+	usb_remove_hcd(hcd);
+err3:
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+
+
+/**
+ * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_msp_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ * may be called without controller electrically present
+ * may be called with controller, bus, and devices active
+ */
+void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+/*
+ * Wrapper around the main ehci_irq.  Since both USB host controllers are
+ * sharing the same IRQ, need to first determine whether we're the intended
+ * recipient of this interrupt.
+ */
+static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
+{
+	u32 int_src;
+	struct device *dev = hcd->self.controller;
+	struct platform_device *pdev;
+	struct mspusb_device *mdev;
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	/* need to reverse-map a couple of containers to get our device */
+	pdev = to_platform_device(dev);
+	mdev = to_mspusb_device(pdev);
+
+	/* Check to see if this interrupt is for this host controller */
+	int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
+	if (int_src & (1 << pdev->id))
+		return ehci_irq(hcd);
+
+	/* Not for this device */
+	return IRQ_NONE;
+}
+#endif /* DUAL_USB */
+
+static const struct hc_driver ehci_msp_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"PMC MSP EHCI",
+	.hcd_priv_size =	sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+	.irq =			ehci_msp_irq,
+#else
+	.irq =			ehci_irq,
+#endif
+	.flags =		HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ehci_msp_setup,
+	.start =		ehci_run,
+	.shutdown		= ehci_shutdown,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	pr_debug("In ehci_hcd_msp_drv_probe");
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+	gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
+#endif
+
+	ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
+
+	return ret;
+}
+
+static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_msp_remove(hcd, pdev);
+
+	/* free TWI GPIO USB_HOST_DEV pin */
+	gpio_free(MSP_PIN_USB0_HOST_DEV);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+	gpio_free(MSP_PIN_USB1_HOST_DEV);
+#endif
+
+	return 0;
+}
+
+MODULE_ALIAS("pmcmsp-ehci");
+
+static struct platform_driver ehci_hcd_msp_driver = {
+	.probe		= ehci_hcd_msp_drv_probe,
+	.remove		= ehci_hcd_msp_drv_remove,
+	.driver		= {
+		.name	= "pmcmsp-ehci",
+		.owner	= THIS_MODULE,
+	},
+};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 233c288..fe99895 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1107,22 +1107,24 @@ submit_async (
 	struct list_head	*qtd_list,
 	gfp_t			mem_flags
 ) {
-	struct ehci_qtd		*qtd;
 	int			epnum;
 	unsigned long		flags;
 	struct ehci_qh		*qh = NULL;
 	int			rc;
 
-	qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
 	epnum = urb->ep->desc.bEndpointAddress;
 
 #ifdef EHCI_URB_TRACE
-	ehci_dbg (ehci,
-		"%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
-		__func__, urb->dev->devpath, urb,
-		epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
-		urb->transfer_buffer_length,
-		qtd, urb->ep->hcpriv);
+	{
+		struct ehci_qtd *qtd;
+		qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
+		ehci_dbg(ehci,
+			 "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
+			 __func__, urb->dev->devpath, urb,
+			 epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
+			 urb->transfer_buffer_length,
+			 qtd, urb->ep->hcpriv);
+	}
 #endif
 
 	spin_lock_irqsave (&ehci->lock, flags);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index aa46f57..1543c83 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1048,8 +1048,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
 	 * not like a QH -- no persistent state (toggle, halt)
 	 */
 	if (stream->refcount == 1) {
-		int		is_in;
-
 		// BUG_ON (!list_empty(&stream->td_list));
 
 		while (!list_empty (&stream->free_list)) {
@@ -1076,7 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream)
 			}
 		}
 
-		is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
 		stream->bEndpointAddress &= 0x0f;
 		if (stream->ep)
 			stream->ep->hcpriv = NULL;
@@ -1590,63 +1587,6 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
 	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
 }
 
-#define AB_REG_BAR_LOW 0xe0
-#define AB_REG_BAR_HIGH 0xe1
-#define AB_INDX(addr) ((addr) + 0x00)
-#define AB_DATA(addr) ((addr) + 0x04)
-#define NB_PCIE_INDX_ADDR 0xe0
-#define NB_PCIE_INDX_DATA 0xe4
-#define NB_PIF0_PWRDOWN_0 0x01100012
-#define NB_PIF0_PWRDOWN_1 0x01100013
-
-static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable)
-{
-	u32 addr, addr_low, addr_high, val;
-
-	outb_p(AB_REG_BAR_LOW, 0xcd6);
-	addr_low = inb_p(0xcd7);
-	outb_p(AB_REG_BAR_HIGH, 0xcd6);
-	addr_high = inb_p(0xcd7);
-	addr = addr_high << 8 | addr_low;
-	outl_p(0x30, AB_INDX(addr));
-	outl_p(0x40, AB_DATA(addr));
-	outl_p(0x34, AB_INDX(addr));
-	val = inl_p(AB_DATA(addr));
-
-	if (disable) {
-		val &= ~0x8;
-		val |= (1 << 4) | (1 << 9);
-	} else {
-		val |= 0x8;
-		val &= ~((1 << 4) | (1 << 9));
-	}
-	outl_p(val, AB_DATA(addr));
-
-	if (amd_nb_dev) {
-		addr = NB_PIF0_PWRDOWN_0;
-		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
-		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
-		if (disable)
-			val &= ~(0x3f << 7);
-		else
-			val |= 0x3f << 7;
-
-		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
-
-		addr = NB_PIF0_PWRDOWN_1;
-		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
-		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
-		if (disable)
-			val &= ~(0x3f << 7);
-		else
-			val |= 0x3f << 7;
-
-		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
-	}
-
-	return;
-}
-
 /* fit urb's itds into the selected schedule slot; activate as needed */
 static int
 itd_link_urb (
@@ -1675,8 +1615,8 @@ itd_link_urb (
 	}
 
 	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
-		if (ehci->amd_l1_fix == 1)
-			ehci_quirk_amd_L1(ehci, 1);
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_disable();
 	}
 
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
@@ -1804,8 +1744,8 @@ itd_complete (
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
-		if (ehci->amd_l1_fix == 1)
-			ehci_quirk_amd_L1(ehci, 0);
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_enable();
 	}
 
 	if (unlikely(list_is_singular(&stream->td_list))) {
@@ -2095,8 +2035,8 @@ sitd_link_urb (
 	}
 
 	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
-		if (ehci->amd_l1_fix == 1)
-			ehci_quirk_amd_L1(ehci, 1);
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_disable();
 	}
 
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
@@ -2200,8 +2140,8 @@ sitd_complete (
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
-		if (ehci->amd_l1_fix == 1)
-			ehci_quirk_amd_L1(ehci, 0);
+		if (ehci->amd_pll_fix == 1)
+			usb_amd_quirk_pll_enable();
 	}
 
 	if (list_is_singular(&stream->td_list)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
new file mode 100644
index 0000000..a516af2
--- /dev/null
+++ b/drivers/usb/host/ehci-tegra.c
@@ -0,0 +1,715 @@
+/*
+ * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2009 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tegra_usb.h>
+#include <linux/irq.h>
+#include <linux/usb/otg.h>
+#include <mach/usb_phy.h>
+
+#define TEGRA_USB_DMA_ALIGN 32
+
+struct tegra_ehci_hcd {
+	struct ehci_hcd *ehci;
+	struct tegra_usb_phy *phy;
+	struct clk *clk;
+	struct clk *emc_clk;
+	struct otg_transceiver *transceiver;
+	int host_resumed;
+	int bus_suspended;
+	int port_resuming;
+	int power_down_on_bus_suspend;
+	enum tegra_usb_phy_port_speed port_speed;
+};
+
+static void tegra_ehci_power_up(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+	clk_enable(tegra->emc_clk);
+	clk_enable(tegra->clk);
+	tegra_usb_phy_power_on(tegra->phy);
+	tegra->host_resumed = 1;
+}
+
+static void tegra_ehci_power_down(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+	tegra->host_resumed = 0;
+	tegra_usb_phy_power_off(tegra->phy);
+	clk_disable(tegra->clk);
+	clk_disable(tegra->emc_clk);
+}
+
+static int tegra_ehci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+	u32 __iomem	*status_reg;
+	u32		temp;
+	unsigned long	flags;
+	int		retval = 0;
+
+	status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	/*
+	 * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
+	 * that are write on clear, by writing back the register read value, so
+	 * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
+	 */
+	if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
+		temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
+		ehci_writel(ehci, temp & ~PORT_PE, status_reg);
+		goto done;
+	}
+
+	else if (typeReq == GetPortStatus) {
+		temp = ehci_readl(ehci, status_reg);
+		if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
+			/* Resume completed, re-enable disconnect detection */
+			tegra->port_resuming = 0;
+			tegra_usb_phy_postresume(tegra->phy);
+		}
+	}
+
+	else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+		temp = ehci_readl(ehci, status_reg);
+		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+			retval = -EPIPE;
+			goto done;
+		}
+
+		temp &= ~PORT_WKCONN_E;
+		temp |= PORT_WKDISC_E | PORT_WKOC_E;
+		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+		/*
+		 * If a transaction is in progress, there may be a delay in
+		 * suspending the port. Poll until the port is suspended.
+		 */
+		if (handshake(ehci, status_reg, PORT_SUSPEND,
+						PORT_SUSPEND, 5000))
+			pr_err("%s: timeout waiting for SUSPEND\n", __func__);
+
+		set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+		goto done;
+	}
+
+	/*
+	 * Tegra host controller will time the resume operation to clear the bit
+	 * when the port control state switches to HS or FS Idle. This behavior
+	 * is different from EHCI where the host controller driver is required
+	 * to set this bit to a zero after the resume duration is timed in the
+	 * driver.
+	 */
+	else if (typeReq == ClearPortFeature &&
+					wValue == USB_PORT_FEAT_SUSPEND) {
+		temp = ehci_readl(ehci, status_reg);
+		if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
+			retval = -EPIPE;
+			goto done;
+		}
+
+		if (!(temp & PORT_SUSPEND))
+			goto done;
+
+		/* Disable disconnect detection during port resume */
+		tegra_usb_phy_preresume(tegra->phy);
+
+		ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
+
+		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+		/* start resume signalling */
+		ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+
+		spin_unlock_irqrestore(&ehci->lock, flags);
+		msleep(20);
+		spin_lock_irqsave(&ehci->lock, flags);
+
+		/* Poll until the controller clears RESUME and SUSPEND */
+		if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
+			pr_err("%s: timeout waiting for RESUME\n", __func__);
+		if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
+			pr_err("%s: timeout waiting for SUSPEND\n", __func__);
+
+		ehci->reset_done[wIndex-1] = 0;
+
+		tegra->port_resuming = 1;
+		goto done;
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* Handle the hub control events here */
+	return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return retval;
+}
+
+static void tegra_ehci_restart(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci_reset(ehci);
+
+	/* setup the frame list and Async q heads */
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+	/* setup the command register and set the controller in RUN mode */
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+
+	down_write(&ehci_cf_port_reset_rwsem);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	/* flush posted writes */
+	ehci_readl(ehci, &ehci->regs->command);
+	up_write(&ehci_cf_port_reset_rwsem);
+}
+
+static int tegra_usb_suspend(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+	struct ehci_regs __iomem *hw = tegra->ehci->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tegra->ehci->lock, flags);
+
+	tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+	ehci_halt(tegra->ehci);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	spin_unlock_irqrestore(&tegra->ehci->lock, flags);
+
+	tegra_ehci_power_down(hcd);
+	return 0;
+}
+
+static int tegra_usb_resume(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	struct ehci_regs __iomem *hw = ehci->regs;
+	unsigned long val;
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	tegra_ehci_power_up(hcd);
+
+	if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+		/* Wait for the phy to detect new devices
+		 * before we restart the controller */
+		msleep(10);
+		goto restart;
+	}
+
+	/* Force the phy to keep data lines in suspend state */
+	tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+	/* Enable host mode */
+	tdi_reset(ehci);
+
+	/* Enable Port Power */
+	val = readl(&hw->port_status[0]);
+	val |= PORT_POWER;
+	writel(val, &hw->port_status[0]);
+	udelay(10);
+
+	/* Check if the phy resume from LP0. When the phy resume from LP0
+	 * USB register will be reset. */
+	if (!readl(&hw->async_next)) {
+		/* Program the field PTC based on the saved speed mode */
+		val = readl(&hw->port_status[0]);
+		val &= ~PORT_TEST(~0);
+		if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+			val |= PORT_TEST_FORCE;
+		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+			val |= PORT_TEST(6);
+		else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+			val |= PORT_TEST(7);
+		writel(val, &hw->port_status[0]);
+		udelay(10);
+
+		/* Disable test mode by setting PTC field to NORMAL_OP */
+		val = readl(&hw->port_status[0]);
+		val &= ~PORT_TEST(~0);
+		writel(val, &hw->port_status[0]);
+		udelay(10);
+	}
+
+	/* Poll until CCS is enabled */
+	if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+						 PORT_CONNECT, 2000)) {
+		pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+		goto restart;
+	}
+
+	/* Poll until PE is enabled */
+	if (handshake(ehci, &hw->port_status[0], PORT_PE,
+						 PORT_PE, 2000)) {
+		pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+		goto restart;
+	}
+
+	/* Clear the PCI status, to avoid an interrupt taken upon resume */
+	val = readl(&hw->status);
+	val |= STS_PCD;
+	writel(val, &hw->status);
+
+	/* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+	val = readl(&hw->port_status[0]);
+	if ((val & PORT_POWER) && (val & PORT_PE)) {
+		val |= PORT_SUSPEND;
+		writel(val, &hw->port_status[0]);
+
+		/* Wait until port suspend completes */
+		if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+							 PORT_SUSPEND, 1000)) {
+			pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+								__func__);
+			goto restart;
+		}
+	}
+
+	tegra_ehci_phy_restore_end(tegra->phy);
+	return 0;
+
+restart:
+	if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+		tegra_ehci_phy_restore_end(tegra->phy);
+
+	tegra_ehci_restart(hcd);
+	return 0;
+}
+
+static void tegra_ehci_shutdown(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+	/* ehci_shutdown touches the USB controller registers, make sure
+	 * controller has clocks to it */
+	if (!tegra->host_resumed)
+		tegra_ehci_power_up(hcd);
+
+	ehci_shutdown(hcd);
+}
+
+static int tegra_ehci_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	/* EHCI registers start at offset 0x100 */
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+		HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+	/* switch to host mode */
+	hcd->has_tt = 1;
+	ehci_reset(ehci);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci->sbrn = 0x20;
+
+	ehci_port_power(ehci, 1);
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+	int error_status = 0;
+
+	error_status = ehci_bus_suspend(hcd);
+	if (!error_status && tegra->power_down_on_bus_suspend) {
+		tegra_usb_suspend(hcd);
+		tegra->bus_suspended = 1;
+	}
+
+	return error_status;
+}
+
+static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
+{
+	struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
+
+	if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
+		tegra_usb_resume(hcd);
+		tegra->bus_suspended = 0;
+	}
+
+	tegra_usb_phy_preresume(tegra->phy);
+	tegra->port_resuming = 1;
+	return ehci_bus_resume(hcd);
+}
+#endif
+
+struct temp_buffer {
+	void *kmalloc_ptr;
+	void *old_xfer_buffer;
+	u8 data[0];
+};
+
+static void free_temp_buffer(struct urb *urb)
+{
+	enum dma_data_direction dir;
+	struct temp_buffer *temp;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	temp = container_of(urb->transfer_buffer, struct temp_buffer,
+			    data);
+
+	if (dir == DMA_FROM_DEVICE)
+		memcpy(temp->old_xfer_buffer, temp->data,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->old_xfer_buffer;
+	kfree(temp->kmalloc_ptr);
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	struct temp_buffer *temp, *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	/* Allocate a buffer with enough padding for alignment */
+	kmalloc_size = urb->transfer_buffer_length +
+		sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1;
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/* Position our struct temp_buffer such that data is aligned */
+	temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
+
+	temp->kmalloc_ptr = kmalloc_ptr;
+	temp->old_xfer_buffer = urb->transfer_buffer;
+	if (dir == DMA_TO_DEVICE)
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->data;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				      gfp_t mem_flags)
+{
+	int ret;
+
+	ret = alloc_temp_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		free_temp_buffer(urb);
+
+	return ret;
+}
+
+static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	free_temp_buffer(urb);
+}
+
+static const struct hc_driver tegra_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Tegra EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	.reset			= tegra_ehci_setup,
+	.irq			= ehci_irq,
+
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= tegra_ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.map_urb_for_dma	= tegra_ehci_map_urb_for_dma,
+	.unmap_urb_for_dma	= tegra_ehci_unmap_urb_for_dma,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= tegra_ehci_hub_control,
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+#ifdef CONFIG_PM
+	.bus_suspend		= tegra_ehci_bus_suspend,
+	.bus_resume		= tegra_ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+};
+
+static int tegra_ehci_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct tegra_ehci_hcd *tegra;
+	struct tegra_ehci_platform_data *pdata;
+	int err = 0;
+	int irq;
+	int instance = pdev->id;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "Platform data missing\n");
+		return -EINVAL;
+	}
+
+	tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
+					dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		err = -ENOMEM;
+		goto fail_hcd;
+	}
+
+	platform_set_drvdata(pdev, tegra);
+
+	tegra->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tegra->clk)) {
+		dev_err(&pdev->dev, "Can't get ehci clock\n");
+		err = PTR_ERR(tegra->clk);
+		goto fail_clk;
+	}
+
+	err = clk_enable(tegra->clk);
+	if (err)
+		goto fail_clken;
+
+	tegra->emc_clk = clk_get(&pdev->dev, "emc");
+	if (IS_ERR(tegra->emc_clk)) {
+		dev_err(&pdev->dev, "Can't get emc clock\n");
+		err = PTR_ERR(tegra->emc_clk);
+		goto fail_emc_clk;
+	}
+
+	clk_enable(tegra->emc_clk);
+	clk_set_rate(tegra->emc_clk, 400000000);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get I/O memory\n");
+		err = -ENXIO;
+		goto fail_io;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = ioremap(res->start, resource_size(res));
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+		err = -ENOMEM;
+		goto fail_io;
+	}
+
+	tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
+						TEGRA_USB_PHY_MODE_HOST);
+	if (IS_ERR(tegra->phy)) {
+		dev_err(&pdev->dev, "Failed to open USB phy\n");
+		err = -ENXIO;
+		goto fail_phy;
+	}
+
+	err = tegra_usb_phy_power_on(tegra->phy);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to power on the phy\n");
+		goto fail;
+	}
+
+	tegra->host_resumed = 1;
+	tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
+	tegra->ehci = hcd_to_ehci(hcd);
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "Failed to get IRQ\n");
+		err = -ENODEV;
+		goto fail;
+	}
+	set_irq_flags(irq, IRQF_VALID);
+
+#ifdef CONFIG_USB_OTG_UTILS
+	if (pdata->operating_mode == TEGRA_USB_OTG) {
+		tegra->transceiver = otg_get_transceiver();
+		if (tegra->transceiver)
+			otg_set_host(tegra->transceiver, &hcd->self);
+	}
+#endif
+
+	err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add USB HCD\n");
+		goto fail;
+	}
+
+	return err;
+
+fail:
+#ifdef CONFIG_USB_OTG_UTILS
+	if (tegra->transceiver) {
+		otg_set_host(tegra->transceiver, NULL);
+		otg_put_transceiver(tegra->transceiver);
+	}
+#endif
+	tegra_usb_phy_close(tegra->phy);
+fail_phy:
+	iounmap(hcd->regs);
+fail_io:
+	clk_disable(tegra->emc_clk);
+	clk_put(tegra->emc_clk);
+fail_emc_clk:
+	clk_disable(tegra->clk);
+fail_clken:
+	clk_put(tegra->clk);
+fail_clk:
+	usb_put_hcd(hcd);
+fail_hcd:
+	kfree(tegra);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int tegra_ehci_resume(struct platform_device *pdev)
+{
+	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+	if (tegra->bus_suspended)
+		return 0;
+
+	return tegra_usb_resume(hcd);
+}
+
+static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+	if (tegra->bus_suspended)
+		return 0;
+
+	if (time_before(jiffies, tegra->ehci->next_statechange))
+		msleep(10);
+
+	return tegra_usb_suspend(hcd);
+}
+#endif
+
+static int tegra_ehci_remove(struct platform_device *pdev)
+{
+	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+	if (tegra == NULL || hcd == NULL)
+		return -EINVAL;
+
+#ifdef CONFIG_USB_OTG_UTILS
+	if (tegra->transceiver) {
+		otg_set_host(tegra->transceiver, NULL);
+		otg_put_transceiver(tegra->transceiver);
+	}
+#endif
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	tegra_usb_phy_close(tegra->phy);
+	iounmap(hcd->regs);
+
+	clk_disable(tegra->clk);
+	clk_put(tegra->clk);
+
+	clk_disable(tegra->emc_clk);
+	clk_put(tegra->emc_clk);
+
+	kfree(tegra);
+	return 0;
+}
+
+static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
+{
+	struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver tegra_ehci_driver = {
+	.probe		= tegra_ehci_probe,
+	.remove		= tegra_ehci_remove,
+#ifdef CONFIG_PM
+	.suspend	= tegra_ehci_suspend,
+	.resume		= tegra_ehci_resume,
+#endif
+	.shutdown	= tegra_ehci_hcd_shutdown,
+	.driver		= {
+		.name	= "tegra-ehci",
+	}
+};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 799ac16..f86d3fa 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -131,7 +131,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
-	unsigned		amd_l1_fix:1;
+	unsigned		amd_pll_fix:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index f90d003..2562e92 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -927,7 +927,8 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb)
 		if (state == US_CTRL_SETUP) {
 			dir = TD_DIR_SETUP;
 			if (unsuitable_for_dma(urb->setup_dma))
-				unmap_urb_setup_for_dma(imx21->hcd, urb);
+				usb_hcd_unmap_urb_setup_for_dma(imx21->hcd,
+					urb);
 			etd->dma_handle = urb->setup_dma;
 			etd->cpu_buffer = urb->setup_packet;
 			bufround = 0;
@@ -943,7 +944,7 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb)
 		dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN;
 		bufround = (dir == TD_DIR_IN) ? 1 : 0;
 		if (unsuitable_for_dma(urb->transfer_dma))
-			unmap_urb_for_dma(imx21->hcd, urb);
+			usb_hcd_unmap_urb_for_dma(imx21->hcd, urb);
 
 		etd->dma_handle = urb->transfer_dma;
 		etd->cpu_buffer = urb->transfer_buffer;
@@ -1471,8 +1472,8 @@ static int get_hub_descriptor(struct usb_hcd *hcd,
 		0x0010 |	/* No over current protection */
 		0);
 
-	desc->bitmap[0] = 1 << 1;
-	desc->bitmap[1] = ~0;
+	desc->u.hs.DeviceRemovable[0] = 1 << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
 	return 0;
 }
 
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 0da7fc0..c0e22f2 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -951,9 +951,9 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x,
 	/* Power switching, device type, overcurrent. */
 	desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f));
 	desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff);
-	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-	desc->bitmap[0] = 0;
-	desc->bitmap[1] = ~0;
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = 0;
+	desc->u.hs.DeviceRemovable[1] = ~0;
 }
 
 /* Perform reset of a given port.
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 43a39eb..662cd00 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -226,7 +226,6 @@ static int claim_ptd_buffers(struct isp1362_ep_queue *epq,
 
 static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep)
 {
-	int index = ep->ptd_index;
 	int last = ep->ptd_index + ep->num_ptds;
 
 	if (last > epq->buf_count)
@@ -236,10 +235,8 @@ static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1
 		    epq->buf_map, epq->skip_map);
 	BUG_ON(last > epq->buf_count);
 
-	for (; index < last; index++) {
-		__clear_bit(index, &epq->buf_map);
-		__set_bit(index, &epq->skip_map);
-	}
+	bitmap_clear(&epq->buf_map, ep->ptd_index, ep->num_ptds);
+	bitmap_set(&epq->skip_map, ep->ptd_index, ep->num_ptds);
 	epq->buf_avail += ep->num_ptds;
 	epq->ptd_count--;
 
@@ -1555,9 +1552,9 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
 	desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f);
 	DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f));
 	desc->bPwrOn2PwrGood = (reg >> 24) & 0xff;
-	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-	desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
-	desc->bitmap[1] = ~0;
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
 
 	DBG(3, "%s: exit\n", __func__);
 }
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index bdba8c5..f50e84a 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -33,6 +33,7 @@ struct isp1760_hcd {
 	struct inter_packet_info atl_ints[32];
 	struct inter_packet_info int_ints[32];
 	struct memory_chunk memory_pool[BLOCKS];
+	u32 atl_queued;
 
 	/* periodic schedule support */
 #define	DEFAULT_I_TDPS		1024
@@ -47,10 +48,6 @@ static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
 {
 	return (struct isp1760_hcd *) (hcd->hcd_priv);
 }
-static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv)
-{
-	return container_of((void *) priv, struct usb_hcd, hcd_priv);
-}
 
 /* Section 2.2 Host Controller Capability Registers */
 #define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
@@ -80,11 +77,10 @@ static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv)
 #define PORT_RWC_BITS   (PORT_CSC)
 
 struct isp1760_qtd {
-	struct isp1760_qtd *hw_next;
 	u8 packet_type;
-	u8 toggle;
-
 	void *data_buffer;
+	u32 payload_addr;
+
 	/* the rest is HCD-private */
 	struct list_head qtd_list;
 	struct urb *urb;
@@ -92,205 +88,267 @@ struct isp1760_qtd {
 
 	/* isp special*/
 	u32 status;
-#define URB_COMPLETE_NOTIFY	(1 << 0)
 #define URB_ENQUEUED		(1 << 1)
-#define URB_TYPE_ATL		(1 << 2)
-#define URB_TYPE_INT		(1 << 3)
 };
 
 struct isp1760_qh {
 	/* first part defined by EHCI spec */
 	struct list_head qtd_list;
-	struct isp1760_hcd *priv;
-
-	/* periodic schedule info */
-	unsigned short period;		/* polling interval */
-	struct usb_device *dev;
 
 	u32 toggle;
 	u32 ping;
 };
 
-#define ehci_port_speed(priv, portsc) USB_PORT_STAT_HIGH_SPEED
-
-static unsigned int isp1760_readl(__u32 __iomem *regs)
+/*
+ * Access functions for isp176x registers (addresses 0..0x03FF).
+ */
+static u32 reg_read32(void __iomem *base, u32 reg)
 {
-	return readl(regs);
+	return readl(base + reg);
 }
 
-static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
+static void reg_write32(void __iomem *base, u32 reg, u32 val)
 {
-	writel(val, regs);
+	writel(val, base + reg);
 }
 
 /*
- * The next two copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * Access functions for isp176x memory (offset >= 0x0400).
+ *
+ * bank_reads8() reads memory locations prefetched by an earlier write to
+ * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
+ * bank optimizations, you should use the more generic mem_reads8() below.
+ *
+ * For access to ptd memory, use the specialized ptd_read() and ptd_write()
+ * below.
+ *
+ * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
  * doesn't quite work because some people have to enforce 32-bit access
  */
-static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
-		__u32 __iomem *dst, u32 len)
+static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
+							__u32 *dst, u32 bytes)
 {
+	__u32 __iomem *src;
 	u32 val;
-	u8 *buff8;
+	__u8 *src_byteptr;
+	__u8 *dst_byteptr;
 
-	if (!src) {
-		printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
-		return;
-	}
+	src = src_base + (bank_addr | src_offset);
 
-	while (len >= 4) {
-		*src = __raw_readl(dst);
-		len -= 4;
-		src++;
-		dst++;
+	if (src_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			*dst = le32_to_cpu(__raw_readl(src));
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			*dst = __raw_readl(src);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
 	}
 
-	if (!len)
+	if (!bytes)
 		return;
 
 	/* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
 	 * allocated.
 	 */
-	val = isp1760_readl(dst);
-
-	buff8 = (u8 *)src;
-	while (len) {
-
-		*buff8 = val;
-		val >>= 8;
-		len--;
-		buff8++;
+	if (src_offset < PAYLOAD_OFFSET)
+		val = le32_to_cpu(__raw_readl(src));
+	else
+		val = __raw_readl(src);
+
+	dst_byteptr = (void *) dst;
+	src_byteptr = (void *) &val;
+	while (bytes > 0) {
+		*dst_byteptr = *src_byteptr;
+		dst_byteptr++;
+		src_byteptr++;
+		bytes--;
 	}
 }
 
-static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src,
-		__u32 __iomem *dst, u32 len)
+static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst,
+								u32 bytes)
 {
-	while (len >= 4) {
-		__raw_writel(*src, dst);
-		len -= 4;
-		src++;
-		dst++;
+	reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0));
+	ndelay(90);
+	bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes);
+}
+
+static void mem_writes8(void __iomem *dst_base, u32 dst_offset,
+						__u32 const *src, u32 bytes)
+{
+	__u32 __iomem *dst;
+
+	dst = dst_base + dst_offset;
+
+	if (dst_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			__raw_writel(cpu_to_le32(*src), dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			__raw_writel(*src, dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
 	}
 
-	if (!len)
+	if (!bytes)
 		return;
-	/* in case we have 3, 2 or 1 by left. The buffer is allocated and the
-	 * extra bytes should not be read by the HW
+	/* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
+	 * extra bytes should not be read by the HW.
 	 */
 
-	__raw_writel(*src, dst);
+	if (dst_offset < PAYLOAD_OFFSET)
+		__raw_writel(cpu_to_le32(*src), dst);
+	else
+		__raw_writel(*src, dst);
+}
+
+/*
+ * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
+ * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
+ */
+static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot,
+								struct ptd *ptd)
+{
+	reg_write32(base, HC_MEMORY_REG,
+				ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd));
+	ndelay(90);
+	bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0),
+						(void *) ptd, sizeof(*ptd));
+}
+
+static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
+								struct ptd *ptd)
+{
+	mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0),
+						&ptd->dw1, 7*sizeof(ptd->dw1));
+	/* Make sure dw0 gets written last (after other dw's and after payload)
+	   since it contains the enable bit */
+	wmb();
+	mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0,
+							sizeof(ptd->dw0));
 }
 
+
 /* memory management of the 60kb on the chip from 0x1000 to 0xffff */
 static void init_memory(struct isp1760_hcd *priv)
 {
-	int i;
-	u32 payload;
+	int i, curr;
+	u32 payload_addr;
 
-	payload = 0x1000;
+	payload_addr = PAYLOAD_OFFSET;
 	for (i = 0; i < BLOCK_1_NUM; i++) {
-		priv->memory_pool[i].start = payload;
+		priv->memory_pool[i].start = payload_addr;
 		priv->memory_pool[i].size = BLOCK_1_SIZE;
 		priv->memory_pool[i].free = 1;
-		payload += priv->memory_pool[i].size;
+		payload_addr += priv->memory_pool[i].size;
 	}
 
-
-	for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) {
-		priv->memory_pool[i].start = payload;
-		priv->memory_pool[i].size = BLOCK_2_SIZE;
-		priv->memory_pool[i].free = 1;
-		payload += priv->memory_pool[i].size;
+	curr = i;
+	for (i = 0; i < BLOCK_2_NUM; i++) {
+		priv->memory_pool[curr + i].start = payload_addr;
+		priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
+		priv->memory_pool[curr + i].free = 1;
+		payload_addr += priv->memory_pool[curr + i].size;
 	}
 
-
-	for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) {
-		priv->memory_pool[i].start = payload;
-		priv->memory_pool[i].size = BLOCK_3_SIZE;
-		priv->memory_pool[i].free = 1;
-		payload += priv->memory_pool[i].size;
+	curr = i;
+	for (i = 0; i < BLOCK_3_NUM; i++) {
+		priv->memory_pool[curr + i].start = payload_addr;
+		priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
+		priv->memory_pool[curr + i].free = 1;
+		payload_addr += priv->memory_pool[curr + i].size;
 	}
 
-	BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE);
+	BUG_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
 }
 
-static u32 alloc_mem(struct isp1760_hcd *priv, u32 size)
+static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	int i;
 
-	if (!size)
-		return ISP1760_NULL_POINTER;
+	BUG_ON(qtd->payload_addr);
+
+	if (!qtd->length)
+		return;
 
 	for (i = 0; i < BLOCKS; i++) {
-		if (priv->memory_pool[i].size >= size &&
+		if (priv->memory_pool[i].size >= qtd->length &&
 				priv->memory_pool[i].free) {
-
 			priv->memory_pool[i].free = 0;
-			return priv->memory_pool[i].start;
+			qtd->payload_addr = priv->memory_pool[i].start;
+			return;
 		}
 	}
 
-	printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n",
-			size);
-	printk(KERN_ERR "Current memory map:\n");
+	dev_err(hcd->self.controller,
+				"%s: Can not allocate %lu bytes of memory\n"
+				"Current memory map:\n",
+				__func__, qtd->length);
 	for (i = 0; i < BLOCKS; i++) {
-		printk(KERN_ERR "Pool %2d size %4d status: %d\n",
+		dev_err(hcd->self.controller, "Pool %2d size %4d status: %d\n",
 				i, priv->memory_pool[i].size,
 				priv->memory_pool[i].free);
 	}
 	/* XXX maybe -ENOMEM could be possible */
 	BUG();
-	return 0;
+	return;
 }
 
-static void free_mem(struct isp1760_hcd *priv, u32 mem)
+static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	int i;
 
-	if (mem == ISP1760_NULL_POINTER)
+	if (!qtd->payload_addr)
 		return;
 
 	for (i = 0; i < BLOCKS; i++) {
-		if (priv->memory_pool[i].start == mem) {
-
+		if (priv->memory_pool[i].start == qtd->payload_addr) {
 			BUG_ON(priv->memory_pool[i].free);
-
 			priv->memory_pool[i].free = 1;
-			return ;
+			qtd->payload_addr = 0;
+			return;
 		}
 	}
 
-	printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n",
-			mem);
+	dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
+						__func__, qtd->payload_addr);
 	BUG();
 }
 
 static void isp1760_init_regs(struct usb_hcd *hcd)
 {
-	isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG);
-	isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_ATL_PTD_SKIPMAP_REG);
-	isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_INT_PTD_SKIPMAP_REG);
-	isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_ISO_PTD_SKIPMAP_REG);
-
-	isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_ATL_PTD_DONEMAP_REG);
-	isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_INT_PTD_DONEMAP_REG);
-	isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
-			HC_ISO_PTD_DONEMAP_REG);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
+
+	reg_write32(hcd->regs, HC_ATL_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE);
+	reg_write32(hcd->regs, HC_INT_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE);
+	reg_write32(hcd->regs, HC_ISO_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE);
 }
 
-static int handshake(struct isp1760_hcd *priv, void __iomem *ptr,
+static int handshake(struct usb_hcd *hcd, u32 reg,
 		      u32 mask, u32 done, int usec)
 {
 	u32 result;
 
 	do {
-		result = isp1760_readl(ptr);
+		result = reg_read32(hcd->regs, reg);
 		if (result == ~0)
 			return -ENODEV;
 		result &= mask;
@@ -303,17 +361,18 @@ static int handshake(struct isp1760_hcd *priv, void __iomem *ptr,
 }
 
 /* reset a non-running (STS_HALT == 1) controller */
-static int ehci_reset(struct isp1760_hcd *priv)
+static int ehci_reset(struct usb_hcd *hcd)
 {
 	int retval;
-	struct usb_hcd *hcd = priv_to_hcd(priv);
-	u32 command = isp1760_readl(hcd->regs + HC_USBCMD);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	u32 command = reg_read32(hcd->regs, HC_USBCMD);
 
 	command |= CMD_RESET;
-	isp1760_writel(command, hcd->regs + HC_USBCMD);
+	reg_write32(hcd->regs, HC_USBCMD, command);
 	hcd->state = HC_STATE_HALT;
 	priv->next_statechange = jiffies;
-	retval = handshake(priv, hcd->regs + HC_USBCMD,
+	retval = handshake(hcd, HC_USBCMD,
 			    CMD_RESET, 0, 250 * 1000);
 	return retval;
 }
@@ -324,8 +383,7 @@ static void qh_destroy(struct isp1760_qh *qh)
 	kmem_cache_free(qh_cachep, qh);
 }
 
-static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv,
-		gfp_t flags)
+static struct isp1760_qh *isp1760_qh_alloc(gfp_t flags)
 {
 	struct isp1760_qh *qh;
 
@@ -334,7 +392,6 @@ static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv,
 		return qh;
 
 	INIT_LIST_HEAD(&qh->qtd_list);
-	qh->priv = priv;
 	return qh;
 }
 
@@ -361,7 +418,7 @@ static int priv_init(struct usb_hcd *hcd)
 	priv->periodic_size = DEFAULT_I_TDPS;
 
 	/* controllers may cache some of the periodic schedule ... */
-	hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS);
+	hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS);
 	/* full frame cache */
 	if (HCC_ISOC_CACHE(hcc_params))
 		priv->i_thresh = 8;
@@ -398,15 +455,15 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	 * Write it twice to ensure correct upper bits if switching
 	 * to 16-bit mode.
 	 */
-	isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
-	isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
 
-	isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG);
+	reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe);
 	/* Change bus pattern */
-	scratch = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
-	scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG);
+	scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	scratch = reg_read32(hcd->regs, HC_SCRATCH_REG);
 	if (scratch != 0xdeadbabe) {
-		printk(KERN_ERR "ISP1760: Scratch test failed.\n");
+		dev_err(hcd->self.controller, "Scratch test failed.\n");
 		return -ENODEV;
 	}
 
@@ -414,30 +471,30 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	isp1760_init_regs(hcd);
 
 	/* reset */
-	isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG);
+	reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL);
 	mdelay(100);
 
-	isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG);
+	reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC);
 	mdelay(100);
 
-	result = ehci_reset(priv);
+	result = ehci_reset(hcd);
 	if (result)
 		return result;
 
 	/* Step 11 passed */
 
-	isp1760_info(priv, "bus width: %d, oc: %s\n",
+	dev_info(hcd->self.controller, "bus width: %d, oc: %s\n",
 			   (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ?
 			   16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
 			   "analog" : "digital");
 
 	/* ATL reset */
-	isp1760_writel(hwmode | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
 	mdelay(10);
-	isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
 
-	isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG);
-	isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE);
+	reg_write32(hcd->regs, HC_INTERRUPT_REG, INTERRUPT_ENABLE_MASK);
+	reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
 
 	/*
 	 * PORT 1 Control register of the ISP1760 is the OTG control
@@ -445,11 +502,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	 * support in this driver, we use port 1 as a "normal" USB host port on
 	 * both chips.
 	 */
-	isp1760_writel(PORT1_POWER | PORT1_INIT2,
-		       hcd->regs + HC_PORT1_CTRL);
+	reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2);
 	mdelay(10);
 
-	priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS);
+	priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
 
 	return priv_init(hcd);
 }
@@ -457,25 +513,24 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 static void isp1760_init_maps(struct usb_hcd *hcd)
 {
 	/*set last maps, for iso its only 1, else 32 tds bitmap*/
-	isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG);
-	isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG);
-	isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG);
+	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
 }
 
 static void isp1760_enable_interrupts(struct usb_hcd *hcd)
 {
-	isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG);
-	isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
-	isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG);
-	isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
-	isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG);
-	isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
 	/* step 23 passed */
 }
 
 static int isp1760_run(struct usb_hcd *hcd)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	int retval;
 	u32 temp;
 	u32 command;
@@ -485,15 +540,15 @@ static int isp1760_run(struct usb_hcd *hcd)
 
 	hcd->state = HC_STATE_RUNNING;
 	isp1760_enable_interrupts(hcd);
-	temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
-	isp1760_writel(temp | HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
 
-	command = isp1760_readl(hcd->regs + HC_USBCMD);
+	command = reg_read32(hcd->regs, HC_USBCMD);
 	command &= ~(CMD_LRESET|CMD_RESET);
 	command |= CMD_RUN;
-	isp1760_writel(command, hcd->regs + HC_USBCMD);
+	reg_write32(hcd->regs, HC_USBCMD, command);
 
-	retval = handshake(priv, hcd->regs + HC_USBCMD,	CMD_RUN, CMD_RUN,
+	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN,
 			250 * 1000);
 	if (retval)
 		return retval;
@@ -504,17 +559,16 @@ static int isp1760_run(struct usb_hcd *hcd)
 	 * the semaphore while doing so.
 	 */
 	down_write(&ehci_cf_port_reset_rwsem);
-	isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
 
-	retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF,
-			250 * 1000);
+	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
 	up_write(&ehci_cf_port_reset_rwsem);
 	if (retval)
 		return retval;
 
-	chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
-	isp1760_info(priv, "USB ISP %04x HW rev. %d started\n",	chipid & 0xffff,
-			chipid >> 16);
+	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+					chipid & 0xffff, chipid >> 16);
 
 	/* PTD Register Init Part 2, Step 28 */
 	/* enable INTs */
@@ -532,160 +586,156 @@ static u32 base_to_chip(u32 base)
 	return ((base - 0x400) >> 3);
 }
 
-static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct urb *urb,
-			u32 payload, struct ptd *ptd)
+static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
+{
+	struct urb *urb;
+
+	if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
+		return 1;
+
+	urb = qtd->urb;
+	qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
+	return (qtd->urb != urb);
+}
+
+static void transform_into_atl(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
 {
-	u32 dw0;
-	u32 dw1;
-	u32 dw2;
-	u32 dw3;
 	u32 maxpacket;
 	u32 multi;
 	u32 pid_code;
 	u32 rl = RL_COUNTER;
 	u32 nak = NAK_COUNTER;
 
+	memset(ptd, 0, sizeof(*ptd));
+
 	/* according to 3.6.2, max packet len can not be > 0x400 */
-	maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+	maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe,
+						usb_pipeout(qtd->urb->pipe));
 	multi =  1 + ((maxpacket >> 11) & 0x3);
 	maxpacket &= 0x7ff;
 
 	/* DW0 */
-	dw0 = PTD_VALID;
-	dw0 |= PTD_LENGTH(qtd->length);
-	dw0 |= PTD_MAXPACKET(maxpacket);
-	dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe));
-	dw1 = usb_pipeendpoint(urb->pipe) >> 1;
+	ptd->dw0 = PTD_VALID;
+	ptd->dw0 |= PTD_LENGTH(qtd->length);
+	ptd->dw0 |= PTD_MAXPACKET(maxpacket);
+	ptd->dw0 |= PTD_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
 
 	/* DW1 */
-	dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe));
+	ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1;
+	ptd->dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
 
 	pid_code = qtd->packet_type;
-	dw1 |= PTD_PID_TOKEN(pid_code);
+	ptd->dw1 |= PTD_PID_TOKEN(pid_code);
 
-	if (usb_pipebulk(urb->pipe))
-		dw1 |= PTD_TRANS_BULK;
-	else if  (usb_pipeint(urb->pipe))
-		dw1 |= PTD_TRANS_INT;
+	if (usb_pipebulk(qtd->urb->pipe))
+		ptd->dw1 |= PTD_TRANS_BULK;
+	else if  (usb_pipeint(qtd->urb->pipe))
+		ptd->dw1 |= PTD_TRANS_INT;
 
-	if (urb->dev->speed != USB_SPEED_HIGH) {
+	if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
 		/* split transaction */
 
-		dw1 |= PTD_TRANS_SPLIT;
-		if (urb->dev->speed == USB_SPEED_LOW)
-			dw1 |= PTD_SE_USB_LOSPEED;
+		ptd->dw1 |= PTD_TRANS_SPLIT;
+		if (qtd->urb->dev->speed == USB_SPEED_LOW)
+			ptd->dw1 |= PTD_SE_USB_LOSPEED;
 
-		dw1 |= PTD_PORT_NUM(urb->dev->ttport);
-		dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum);
+		ptd->dw1 |= PTD_PORT_NUM(qtd->urb->dev->ttport);
+		ptd->dw1 |= PTD_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
 
 		/* SE bit for Split INT transfers */
-		if (usb_pipeint(urb->pipe) &&
-				(urb->dev->speed == USB_SPEED_LOW))
-			dw1 |= 2 << 16;
+		if (usb_pipeint(qtd->urb->pipe) &&
+				(qtd->urb->dev->speed == USB_SPEED_LOW))
+			ptd->dw1 |= 2 << 16;
 
-		dw3 = 0;
+		ptd->dw3 = 0;
 		rl = 0;
 		nak = 0;
 	} else {
-		dw0 |= PTD_MULTI(multi);
-		if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe))
-			dw3 = qh->ping;
+		ptd->dw0 |= PTD_MULTI(multi);
+		if (usb_pipecontrol(qtd->urb->pipe) ||
+						usb_pipebulk(qtd->urb->pipe))
+			ptd->dw3 = qh->ping;
 		else
-			dw3 = 0;
+			ptd->dw3 = 0;
 	}
 	/* DW2 */
-	dw2 = 0;
-	dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload));
-	dw2 |= PTD_RL_CNT(rl);
-	dw3 |= PTD_NAC_CNT(nak);
+	ptd->dw2 = 0;
+	ptd->dw2 |= PTD_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
+	ptd->dw2 |= PTD_RL_CNT(rl);
+	ptd->dw3 |= PTD_NAC_CNT(nak);
 
 	/* DW3 */
-	if (usb_pipecontrol(urb->pipe))
-		dw3 |= PTD_DATA_TOGGLE(qtd->toggle);
-	else
-		dw3 |= qh->toggle;
-
+	ptd->dw3 |= qh->toggle;
+	if (usb_pipecontrol(qtd->urb->pipe)) {
+		if (qtd->data_buffer == qtd->urb->setup_packet)
+			ptd->dw3 &= ~PTD_DATA_TOGGLE(1);
+		else if (last_qtd_of_urb(qtd, qh))
+			ptd->dw3 |= PTD_DATA_TOGGLE(1);
+	}
 
-	dw3 |= PTD_ACTIVE;
+	ptd->dw3 |= PTD_ACTIVE;
 	/* Cerr */
-	dw3 |= PTD_CERR(ERR_COUNTER);
-
-	memset(ptd, 0, sizeof(*ptd));
-
-	ptd->dw0 = cpu_to_le32(dw0);
-	ptd->dw1 = cpu_to_le32(dw1);
-	ptd->dw2 = cpu_to_le32(dw2);
-	ptd->dw3 = cpu_to_le32(dw3);
+	ptd->dw3 |= PTD_CERR(ERR_COUNTER);
 }
 
-static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct urb *urb,
-			u32 payload, struct ptd *ptd)
+static void transform_add_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
 {
-	u32 maxpacket;
-	u32 multi;
-	u32 numberofusofs;
-	u32 i;
-	u32 usofmask, usof;
+	u32 usof;
 	u32 period;
 
-	maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-	multi =  1 + ((maxpacket >> 11) & 0x3);
-	maxpacket &= 0x7ff;
-	/* length of the data per uframe */
-	maxpacket = multi * maxpacket;
-
-	numberofusofs = urb->transfer_buffer_length / maxpacket;
-	if (urb->transfer_buffer_length % maxpacket)
-		numberofusofs += 1;
-
-	usofmask = 1;
-	usof = 0;
-	for (i = 0; i < numberofusofs; i++) {
-		usof |= usofmask;
-		usofmask <<= 1;
-	}
-
-	if (urb->dev->speed != USB_SPEED_HIGH) {
-		/* split */
-		ptd->dw5 = cpu_to_le32(0x1c);
+	/*
+	 * Most of this is guessing. ISP1761 datasheet is quite unclear, and
+	 * the algorithm from the original Philips driver code, which was
+	 * pretty much used in this driver before as well, is quite horrendous
+	 * and, i believe, incorrect. The code below follows the datasheet and
+	 * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
+	 * more reliable this way (fingers crossed...).
+	 */
 
-		if (qh->period >= 32)
-			period = qh->period / 2;
+	if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
+		/* urb->interval is in units of microframes (1/8 ms) */
+		period = qtd->urb->interval >> 3;
+
+		if (qtd->urb->interval > 4)
+			usof = 0x01; /* One bit set =>
+						interval 1 ms * uFrame-match */
+		else if (qtd->urb->interval > 2)
+			usof = 0x22; /* Two bits set => interval 1/2 ms */
+		else if (qtd->urb->interval > 1)
+			usof = 0x55; /* Four bits set => interval 1/4 ms */
 		else
-			period = qh->period;
-
+			usof = 0xff; /* All bits set => interval 1/8 ms */
 	} else {
+		/* urb->interval is in units of frames (1 ms) */
+		period = qtd->urb->interval;
+		usof = 0x0f;		/* Execute Start Split on any of the
+					   four first uFrames */
 
-		if (qh->period >= 8)
-			period = qh->period/8;
-		else
-			period = qh->period;
-
-		if (period >= 32)
-			period  = 16;
-
-		if (qh->period >= 8) {
-			/* millisecond period */
-			period = (period << 3);
-		} else {
-			/* usof based tranmsfers */
-			/* minimum 4 usofs */
-			usof = 0x11;
-		}
+		/*
+		 * First 8 bits in dw5 is uSCS and "specifies which uSOF the
+		 * complete split needs to be sent. Valid only for IN." Also,
+		 * "All bits can be set to one for every transfer." (p 82,
+		 * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
+		 * that number come from? 0xff seems to work fine...
+		 */
+		/* ptd->dw5 = 0x1c; */
+		ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */
 	}
 
-	ptd->dw2 |= cpu_to_le32(period);
-	ptd->dw4 = cpu_to_le32(usof);
+	period = period >> 1;/* Ensure equal or shorter period than requested */
+	period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
+
+	ptd->dw2 |= period;
+	ptd->dw4 = usof;
 }
 
-static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct urb *urb,
-			u32 payload, struct ptd *ptd)
+static void transform_into_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
 {
-	transform_into_atl(priv, qh, qtd, urb, payload, ptd);
-	transform_add_int(priv, qh, qtd, urb,  payload, ptd);
+	transform_into_atl(qh, qtd, ptd);
+	transform_add_int(qh, qtd, ptd);
 }
 
 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
@@ -695,10 +745,9 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
 
 	qtd->data_buffer = databuffer;
 	qtd->packet_type = GET_QTD_TOKEN_TYPE(token);
-	qtd->toggle = GET_DATA_TOGGLE(token);
 
-	if (len > HC_ATL_PL_SIZE)
-		count = HC_ATL_PL_SIZE;
+	if (len > MAX_PAYLOAD_SIZE)
+		count = MAX_PAYLOAD_SIZE;
 	else
 		count = len;
 
@@ -706,29 +755,27 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
 	return count;
 }
 
-static int check_error(struct ptd *ptd)
+static int check_error(struct usb_hcd *hcd, struct ptd *ptd)
 {
 	int error = 0;
-	u32 dw3;
 
-	dw3 = le32_to_cpu(ptd->dw3);
-	if (dw3 & DW3_HALT_BIT) {
+	if (ptd->dw3 & DW3_HALT_BIT) {
 		error = -EPIPE;
 
-		if (dw3 & DW3_ERROR_BIT)
+		if (ptd->dw3 & DW3_ERROR_BIT)
 			pr_err("error bit is set in DW3\n");
 	}
 
-	if (dw3 & DW3_QTD_ACTIVE) {
-		printk(KERN_ERR "transfer active bit is set DW3\n");
-		printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf,
-				(le32_to_cpu(ptd->dw2) >> 25) & 0xf);
+	if (ptd->dw3 & DW3_QTD_ACTIVE) {
+		dev_err(hcd->self.controller, "Transfer active bit is set DW3\n"
+			"nak counter: %d, rl: %d\n",
+			(ptd->dw3 >> 19) & 0xf, (ptd->dw2 >> 25) & 0xf);
 	}
 
 	return error;
 }
 
-static void check_int_err_status(u32 dw4)
+static void check_int_err_status(struct usb_hcd *hcd, u32 dw4)
 {
 	u32 i;
 
@@ -737,79 +784,67 @@ static void check_int_err_status(u32 dw4)
 	for (i = 0; i < 8; i++) {
 		switch (dw4 & 0x7) {
 		case INT_UNDERRUN:
-			printk(KERN_ERR "ERROR: under run , %d\n", i);
+			dev_err(hcd->self.controller, "Underrun (%d)\n", i);
 			break;
 
 		case INT_EXACT:
-			printk(KERN_ERR "ERROR: transaction error, %d\n", i);
+			dev_err(hcd->self.controller,
+						"Transaction error (%d)\n", i);
 			break;
 
 		case INT_BABBLE:
-			printk(KERN_ERR "ERROR: babble error, %d\n", i);
+			dev_err(hcd->self.controller, "Babble error (%d)\n", i);
 			break;
 		}
 		dw4 >>= 3;
 	}
 }
 
-static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv,
-		u32 payload)
+static void enqueue_one_qtd(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 {
-	u32 token;
-	struct usb_hcd *hcd = priv_to_hcd(priv);
-
-	token = qtd->packet_type;
-
-	if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) {
-		switch (token) {
+	if (qtd->length && (qtd->length <= MAX_PAYLOAD_SIZE)) {
+		switch (qtd->packet_type) {
 		case IN_PID:
 			break;
 		case OUT_PID:
 		case SETUP_PID:
-			priv_write_copy(priv, qtd->data_buffer,
-					hcd->regs + payload,
-					qtd->length);
+			mem_writes8(hcd->regs, qtd->payload_addr,
+						qtd->data_buffer, qtd->length);
 		}
 	}
 }
 
-static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload,
-		struct isp1760_hcd *priv, struct isp1760_qh *qh,
-		struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+static void enqueue_one_atl_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+					u32 slot, struct isp1760_qtd *qtd)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct ptd ptd;
-	struct usb_hcd *hcd = priv_to_hcd(priv);
 
-	transform_into_atl(priv, qh, qtd, urb, payload, &ptd);
-	priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd));
-	enqueue_one_qtd(qtd, priv, payload);
+	alloc_mem(hcd, qtd);
+	transform_into_atl(qh, qtd, &ptd);
+	ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+	enqueue_one_qtd(hcd, qtd);
 
-	priv->atl_ints[slot].urb = urb;
 	priv->atl_ints[slot].qh = qh;
 	priv->atl_ints[slot].qtd = qtd;
-	priv->atl_ints[slot].data_buffer = qtd->data_buffer;
-	priv->atl_ints[slot].payload = payload;
-	qtd->status |= URB_ENQUEUED | URB_TYPE_ATL;
+	qtd->status |= URB_ENQUEUED;
 	qtd->status |= slot << 16;
 }
 
-static void enqueue_one_int_qtd(u32 int_regs, u32 payload,
-		struct isp1760_hcd *priv, struct isp1760_qh *qh,
-		struct urb *urb, u32 slot,  struct isp1760_qtd *qtd)
+static void enqueue_one_int_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+					u32 slot, struct isp1760_qtd *qtd)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct ptd ptd;
-	struct usb_hcd *hcd = priv_to_hcd(priv);
 
-	transform_into_int(priv, qh, qtd, urb, payload, &ptd);
-	priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd));
-	enqueue_one_qtd(qtd, priv, payload);
+	alloc_mem(hcd, qtd);
+	transform_into_int(qh, qtd, &ptd);
+	ptd_write(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
+	enqueue_one_qtd(hcd, qtd);
 
-	priv->int_ints[slot].urb = urb;
 	priv->int_ints[slot].qh = qh;
 	priv->int_ints[slot].qtd = qtd;
-	priv->int_ints[slot].data_buffer = qtd->data_buffer;
-	priv->int_ints[slot].payload = payload;
-	qtd->status |= URB_ENQUEUED | URB_TYPE_INT;
+	qtd->status |= URB_ENQUEUED;
 	qtd->status |= slot << 16;
 }
 
@@ -818,9 +853,7 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 skip_map, or_map;
-	u32 queue_entry;
 	u32 slot;
-	u32 atl_regs, payload;
 	u32 buffstatus;
 
 	/*
@@ -831,38 +864,35 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	 */
 	mmiowb();
 	ndelay(195);
-	skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 
 	BUG_ON(!skip_map);
 	slot = __ffs(skip_map);
-	queue_entry = 1 << slot;
-
-	atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd);
 
-	payload = alloc_mem(priv, qtd->length);
+	enqueue_one_atl_qtd(hcd, qh, slot, qtd);
 
-	enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd);
+	or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG);
+	or_map |= (1 << slot);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map);
 
-	or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
-	or_map |= queue_entry;
-	isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+	skip_map &= ~(1 << slot);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 
-	skip_map &= ~queue_entry;
-	isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+	priv->atl_queued++;
+	if (priv->atl_queued == 2)
+		reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
+				INTERRUPT_ENABLE_SOT_MASK);
 
-	buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+	buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG);
 	buffstatus |= ATL_BUFFER;
-	isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus);
 }
 
 static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 				  struct isp1760_qtd *qtd)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 skip_map, or_map;
-	u32 queue_entry;
 	u32 slot;
-	u32 int_regs, payload;
 	u32 buffstatus;
 
 	/*
@@ -873,37 +903,34 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	 */
 	mmiowb();
 	ndelay(195);
-	skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 
 	BUG_ON(!skip_map);
 	slot = __ffs(skip_map);
-	queue_entry = 1 << slot;
-
-	int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd);
 
-	payload = alloc_mem(priv, qtd->length);
+	enqueue_one_int_qtd(hcd, qh, slot, qtd);
 
-	enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd);
+	or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG);
+	or_map |= (1 << slot);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map);
 
-	or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG);
-	or_map |= queue_entry;
-	isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+	skip_map &= ~(1 << slot);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
 
-	skip_map &= ~queue_entry;
-	isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG);
-
-	buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+	buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG);
 	buffstatus |= INT_BUFFER;
-	isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus);
 }
 
-static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status)
+static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
 __releases(priv->lock)
 __acquires(priv->lock)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
 	if (!urb->unlinked) {
-		if (status == -EINPROGRESS)
-			status = 0;
+		if (urb->status == -EINPROGRESS)
+			urb->status = 0;
 	}
 
 	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
@@ -915,22 +942,28 @@ __acquires(priv->lock)
 	}
 
 	/* complete() can reenter this HCD */
-	usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
 	spin_unlock(&priv->lock);
-	usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status);
+	usb_hcd_giveback_urb(hcd, urb, urb->status);
 	spin_lock(&priv->lock);
 }
 
 static void isp1760_qtd_free(struct isp1760_qtd *qtd)
 {
+	BUG_ON(qtd->payload_addr);
 	kmem_cache_free(qtd_cachep, qtd);
 }
 
-static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd)
+static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd,
+							struct isp1760_qh *qh)
 {
 	struct isp1760_qtd *tmp_qtd;
 
-	tmp_qtd = qtd->hw_next;
+	if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
+		tmp_qtd = NULL;
+	else
+		tmp_qtd = list_entry(qtd->qtd_list.next, struct isp1760_qtd,
+								qtd_list);
 	list_del(&qtd->qtd_list);
 	isp1760_qtd_free(qtd);
 	return tmp_qtd;
@@ -941,32 +974,26 @@ static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd)
  * isn't the last one than remove also his successor(s).
  * Returns the QTD which is part of an new URB and should be enqueued.
  */
-static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd)
+static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd,
+							struct isp1760_qh *qh)
 {
-	struct isp1760_qtd *tmp_qtd;
-	int last_one;
+	struct urb *urb;
 
+	urb = qtd->urb;
 	do {
-		tmp_qtd = qtd->hw_next;
-		last_one = qtd->status & URB_COMPLETE_NOTIFY;
-		list_del(&qtd->qtd_list);
-		isp1760_qtd_free(qtd);
-		qtd = tmp_qtd;
-	} while (!last_one && qtd);
+		qtd = clean_this_qtd(qtd, qh);
+	} while (qtd && (qtd->urb == urb));
 
 	return qtd;
 }
 
-static void do_atl_int(struct usb_hcd *usb_hcd)
+static void do_atl_int(struct usb_hcd *hcd)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 done_map, skip_map;
 	struct ptd ptd;
-	struct urb *urb = NULL;
-	u32 atl_regs_base;
-	u32 atl_regs;
-	u32 queue_entry;
-	u32 payload;
+	struct urb *urb;
+	u32 slot;
 	u32 length;
 	u32 or_map;
 	u32 status = -EINVAL;
@@ -976,62 +1003,36 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 	u32 rl;
 	u32 nakcount;
 
-	done_map = isp1760_readl(usb_hcd->regs +
-			HC_ATL_PTD_DONEMAP_REG);
-	skip_map = isp1760_readl(usb_hcd->regs +
-			HC_ATL_PTD_SKIPMAP_REG);
+	done_map = reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
+	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 
-	or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+	or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG);
 	or_map &= ~done_map;
-	isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map);
 
-	atl_regs_base = ATL_REGS_OFFSET;
 	while (done_map) {
-		u32 dw1;
-		u32 dw2;
-		u32 dw3;
-
 		status = 0;
+		priv->atl_queued--;
 
-		queue_entry = __ffs(done_map);
-		done_map &= ~(1 << queue_entry);
-		skip_map |= 1 << queue_entry;
-
-		atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd);
+		slot = __ffs(done_map);
+		done_map &= ~(1 << slot);
+		skip_map |= (1 << slot);
 
-		urb = priv->atl_ints[queue_entry].urb;
-		qtd = priv->atl_ints[queue_entry].qtd;
-		qh = priv->atl_ints[queue_entry].qh;
-		payload = priv->atl_ints[queue_entry].payload;
+		qtd = priv->atl_ints[slot].qtd;
+		qh = priv->atl_ints[slot].qh;
 
 		if (!qh) {
-			printk(KERN_ERR "qh is 0\n");
+			dev_err(hcd->self.controller, "qh is 0\n");
 			continue;
 		}
-		isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs +
-				HC_MEMORY_REG);
-		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
-				HC_MEMORY_REG);
-		/*
-		 * write bank1 address twice to ensure the 90ns delay (time
-		 * between BANK0 write and the priv_read_copy() call is at
-		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
-		 */
-		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
-				HC_MEMORY_REG);
+		ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
 
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs +
-				ISP_BANK(0), sizeof(ptd));
-
-		dw1 = le32_to_cpu(ptd.dw1);
-		dw2 = le32_to_cpu(ptd.dw2);
-		dw3 = le32_to_cpu(ptd.dw3);
-		rl = (dw2 >> 25) & 0x0f;
-		nakcount = (dw3 >> 19) & 0xf;
+		rl = (ptd.dw2 >> 25) & 0x0f;
+		nakcount = (ptd.dw3 >> 19) & 0xf;
 
 		/* Transfer Error, *but* active and no HALT -> reload */
-		if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) &&
-				!(dw3 & DW3_HALT_BIT)) {
+		if ((ptd.dw3 & DW3_ERROR_BIT) && (ptd.dw3 & DW3_QTD_ACTIVE) &&
+				!(ptd.dw3 & DW3_HALT_BIT)) {
 
 			/* according to ppriv code, we have to
 			 * reload this one if trasfered bytes != requested bytes
@@ -1040,13 +1041,14 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			 * triggered so far.
 			 */
 
-			length = PTD_XFERRED_LENGTH(dw3);
-			printk(KERN_ERR "Should reload now.... transfered %d "
+			length = PTD_XFERRED_LENGTH(ptd.dw3);
+			dev_err(hcd->self.controller,
+					"Should reload now... transferred %d "
 					"of %zu\n", length, qtd->length);
 			BUG();
 		}
 
-		if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
+		if (!nakcount && (ptd.dw3 & DW3_QTD_ACTIVE)) {
 			u32 buffstatus;
 
 			/*
@@ -1054,52 +1056,45 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			 * device is not able to send data fast enough.
 			 * This happens mostly on slower hardware.
 			 */
-			printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
-					"%d of %zu done: %08x cur: %08x\n", qtd,
-					urb, qh, PTD_XFERRED_LENGTH(dw3),
-					qtd->length, done_map,
-					(1 << queue_entry));
 
 			/* RL counter = ERR counter */
-			dw3 &= ~(0xf << 19);
-			dw3 |= rl << 19;
-			dw3 &= ~(3 << (55 - 32));
-			dw3 |= ERR_COUNTER << (55 - 32);
+			ptd.dw3 &= ~(0xf << 19);
+			ptd.dw3 |= rl << 19;
+			ptd.dw3 &= ~(3 << (55 - 32));
+			ptd.dw3 |= ERR_COUNTER << (55 - 32);
 
 			/*
 			 * It is not needed to write skip map back because it
 			 * is unchanged. Just make sure that this entry is
 			 * unskipped once it gets written to the HW.
 			 */
-			skip_map &= ~(1 << queue_entry);
-			or_map = isp1760_readl(usb_hcd->regs +
-					HC_ATL_IRQ_MASK_OR_REG);
-			or_map |= 1 << queue_entry;
-			isp1760_writel(or_map, usb_hcd->regs +
-					HC_ATL_IRQ_MASK_OR_REG);
-
-			ptd.dw3 = cpu_to_le32(dw3);
-			priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
-					atl_regs, sizeof(ptd));
-
-			ptd.dw0 |= cpu_to_le32(PTD_VALID);
-			priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
-					atl_regs, sizeof(ptd));
-
-			buffstatus = isp1760_readl(usb_hcd->regs +
-					HC_BUFFER_STATUS_REG);
+			skip_map &= ~(1 << slot);
+			or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG);
+			or_map |= 1 << slot;
+			reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map);
+
+			ptd.dw0 |= PTD_VALID;
+			ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+
+			priv->atl_queued++;
+			if (priv->atl_queued == 2)
+				reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
+						INTERRUPT_ENABLE_SOT_MASK);
+
+			buffstatus = reg_read32(hcd->regs,
+							HC_BUFFER_STATUS_REG);
 			buffstatus |= ATL_BUFFER;
-			isp1760_writel(buffstatus, usb_hcd->regs +
-					HC_BUFFER_STATUS_REG);
+			reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+								buffstatus);
 			continue;
 		}
 
-		error = check_error(&ptd);
+		error = check_error(hcd, &ptd);
 		if (error) {
 			status = error;
-			priv->atl_ints[queue_entry].qh->toggle = 0;
-			priv->atl_ints[queue_entry].qh->ping = 0;
-			urb->status = -EPIPE;
+			priv->atl_ints[slot].qh->toggle = 0;
+			priv->atl_ints[slot].qh->ping = 0;
+			qtd->urb->status = -EPIPE;
 
 #if 0
 			printk(KERN_ERR "Error in %s().\n", __func__);
@@ -1110,154 +1105,123 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 					ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
 #endif
 		} else {
-			if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-				priv->atl_ints[queue_entry].qh->toggle = dw3 &
-					(1 << 25);
-				priv->atl_ints[queue_entry].qh->ping = dw3 &
-					(1 << 26);
-			}
+			priv->atl_ints[slot].qh->toggle = ptd.dw3 & (1 << 25);
+			priv->atl_ints[slot].qh->ping = ptd.dw3 & (1 << 26);
 		}
 
-		length = PTD_XFERRED_LENGTH(dw3);
+		length = PTD_XFERRED_LENGTH(ptd.dw3);
 		if (length) {
-			switch (DW1_GET_PID(dw1)) {
+			switch (DW1_GET_PID(ptd.dw1)) {
 			case IN_PID:
-				priv_read_copy(priv,
-					priv->atl_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload + ISP_BANK(1),
-					length);
+				mem_reads8(hcd->regs, qtd->payload_addr,
+						qtd->data_buffer, length);
 
 			case OUT_PID:
 
-				urb->actual_length += length;
+				qtd->urb->actual_length += length;
 
 			case SETUP_PID:
 				break;
 			}
 		}
 
-		priv->atl_ints[queue_entry].data_buffer = NULL;
-		priv->atl_ints[queue_entry].urb = NULL;
-		priv->atl_ints[queue_entry].qtd = NULL;
-		priv->atl_ints[queue_entry].qh = NULL;
+		priv->atl_ints[slot].qtd = NULL;
+		priv->atl_ints[slot].qh = NULL;
 
-		free_mem(priv, payload);
+		free_mem(hcd, qtd);
 
-		isp1760_writel(skip_map, usb_hcd->regs +
-				HC_ATL_PTD_SKIPMAP_REG);
+		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 
-		if (urb->status == -EPIPE) {
+		if (qtd->urb->status == -EPIPE) {
 			/* HALT was received */
 
-			qtd = clean_up_qtdlist(qtd);
-			isp1760_urb_done(priv, urb, urb->status);
+			urb = qtd->urb;
+			qtd = clean_up_qtdlist(qtd, qh);
+			isp1760_urb_done(hcd, urb);
 
-		} else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
+		} else if (usb_pipebulk(qtd->urb->pipe) &&
+						(length < qtd->length)) {
 			/* short BULK received */
 
-			if (urb->transfer_flags & URB_SHORT_NOT_OK) {
-				urb->status = -EREMOTEIO;
-				isp1760_dbg(priv, "short bulk, %d instead %zu "
-					"with URB_SHORT_NOT_OK flag.\n",
-					length, qtd->length);
+			if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) {
+				qtd->urb->status = -EREMOTEIO;
+				dev_dbg(hcd->self.controller,
+						"short bulk, %d instead %zu "
+						"with URB_SHORT_NOT_OK flag.\n",
+						length, qtd->length);
 			}
 
-			if (urb->status == -EINPROGRESS)
-				urb->status = 0;
-
-			qtd = clean_up_qtdlist(qtd);
+			if (qtd->urb->status == -EINPROGRESS)
+				qtd->urb->status = 0;
 
-			isp1760_urb_done(priv, urb, urb->status);
+			urb = qtd->urb;
+			qtd = clean_up_qtdlist(qtd, qh);
+			isp1760_urb_done(hcd, urb);
 
-		} else if (qtd->status & URB_COMPLETE_NOTIFY) {
+		} else if (last_qtd_of_urb(qtd, qh)) {
 			/* that was the last qtd of that URB */
 
-			if (urb->status == -EINPROGRESS)
-				urb->status = 0;
+			if (qtd->urb->status == -EINPROGRESS)
+				qtd->urb->status = 0;
 
-			qtd = clean_this_qtd(qtd);
-			isp1760_urb_done(priv, urb, urb->status);
+			urb = qtd->urb;
+			qtd = clean_up_qtdlist(qtd, qh);
+			isp1760_urb_done(hcd, urb);
 
 		} else {
 			/* next QTD of this URB */
 
-			qtd = clean_this_qtd(qtd);
+			qtd = clean_this_qtd(qtd, qh);
 			BUG_ON(!qtd);
 		}
 
 		if (qtd)
-			enqueue_an_ATL_packet(usb_hcd, qh, qtd);
+			enqueue_an_ATL_packet(hcd, qh, qtd);
 
-		skip_map = isp1760_readl(usb_hcd->regs +
-				HC_ATL_PTD_SKIPMAP_REG);
+		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 	}
+	if (priv->atl_queued <= 1)
+		reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
+							INTERRUPT_ENABLE_MASK);
 }
 
-static void do_intl_int(struct usb_hcd *usb_hcd)
+static void do_intl_int(struct usb_hcd *hcd)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 done_map, skip_map;
 	struct ptd ptd;
-	struct urb *urb = NULL;
-	u32 int_regs;
-	u32 int_regs_base;
-	u32 payload;
+	struct urb *urb;
 	u32 length;
 	u32 or_map;
 	int error;
-	u32 queue_entry;
+	u32 slot;
 	struct isp1760_qtd *qtd;
 	struct isp1760_qh *qh;
 
-	done_map = isp1760_readl(usb_hcd->regs +
-			HC_INT_PTD_DONEMAP_REG);
-	skip_map = isp1760_readl(usb_hcd->regs +
-			HC_INT_PTD_SKIPMAP_REG);
+	done_map = reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
+	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 
-	or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+	or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG);
 	or_map &= ~done_map;
-	isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
-
-	int_regs_base = INT_REGS_OFFSET;
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map);
 
 	while (done_map) {
-		u32 dw1;
-		u32 dw3;
+		slot = __ffs(done_map);
+		done_map &= ~(1 << slot);
+		skip_map |= (1 << slot);
 
-		queue_entry = __ffs(done_map);
-		done_map &= ~(1 << queue_entry);
-		skip_map |= 1 << queue_entry;
-
-		int_regs = int_regs_base + queue_entry * sizeof(struct ptd);
-		urb = priv->int_ints[queue_entry].urb;
-		qtd = priv->int_ints[queue_entry].qtd;
-		qh = priv->int_ints[queue_entry].qh;
-		payload = priv->int_ints[queue_entry].payload;
+		qtd = priv->int_ints[slot].qtd;
+		qh = priv->int_ints[slot].qh;
 
 		if (!qh) {
-			printk(KERN_ERR "(INT) qh is 0\n");
+			dev_err(hcd->self.controller, "(INT) qh is 0\n");
 			continue;
 		}
 
-		isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs +
-				HC_MEMORY_REG);
-		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
-				HC_MEMORY_REG);
-		/*
-		 * write bank1 address twice to ensure the 90ns delay (time
-		 * between BANK0 write and the priv_read_copy() call is at
-		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
-		 */
-		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
-				HC_MEMORY_REG);
+		ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
+		check_int_err_status(hcd, ptd.dw4);
 
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs +
-				ISP_BANK(0), sizeof(ptd));
-		dw1 = le32_to_cpu(ptd.dw1);
-		dw3 = le32_to_cpu(ptd.dw3);
-		check_int_err_status(le32_to_cpu(ptd.dw4));
-
-		error = check_error(&ptd);
+		error = check_error(hcd, &ptd);
 		if (error) {
 #if 0
 			printk(KERN_ERR "Error in %s().\n", __func__);
@@ -1267,83 +1231,77 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 					ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
 					ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
 #endif
-			urb->status = -EPIPE;
-			priv->int_ints[queue_entry].qh->toggle = 0;
-			priv->int_ints[queue_entry].qh->ping = 0;
+			qtd->urb->status = -EPIPE;
+			priv->int_ints[slot].qh->toggle = 0;
+			priv->int_ints[slot].qh->ping = 0;
 
 		} else {
-			priv->int_ints[queue_entry].qh->toggle =
-				dw3 & (1 << 25);
-			priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26);
+			priv->int_ints[slot].qh->toggle = ptd.dw3 & (1 << 25);
+			priv->int_ints[slot].qh->ping = ptd.dw3 & (1 << 26);
 		}
 
-		if (urb->dev->speed != USB_SPEED_HIGH)
-			length = PTD_XFERRED_LENGTH_LO(dw3);
+		if (qtd->urb->dev->speed != USB_SPEED_HIGH)
+			length = PTD_XFERRED_LENGTH_LO(ptd.dw3);
 		else
-			length = PTD_XFERRED_LENGTH(dw3);
+			length = PTD_XFERRED_LENGTH(ptd.dw3);
 
 		if (length) {
-			switch (DW1_GET_PID(dw1)) {
+			switch (DW1_GET_PID(ptd.dw1)) {
 			case IN_PID:
-				priv_read_copy(priv,
-					priv->int_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload + ISP_BANK(1),
-					length);
+				mem_reads8(hcd->regs, qtd->payload_addr,
+						qtd->data_buffer, length);
 			case OUT_PID:
 
-				urb->actual_length += length;
+				qtd->urb->actual_length += length;
 
 			case SETUP_PID:
 				break;
 			}
 		}
 
-		priv->int_ints[queue_entry].data_buffer = NULL;
-		priv->int_ints[queue_entry].urb = NULL;
-		priv->int_ints[queue_entry].qtd = NULL;
-		priv->int_ints[queue_entry].qh = NULL;
+		priv->int_ints[slot].qtd = NULL;
+		priv->int_ints[slot].qh = NULL;
 
-		isp1760_writel(skip_map, usb_hcd->regs +
-				HC_INT_PTD_SKIPMAP_REG);
-		free_mem(priv, payload);
+		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
+		free_mem(hcd, qtd);
 
-		if (urb->status == -EPIPE) {
+		if (qtd->urb->status == -EPIPE) {
 			/* HALT received */
 
-			 qtd = clean_up_qtdlist(qtd);
-			 isp1760_urb_done(priv, urb, urb->status);
+			urb = qtd->urb;
+			qtd = clean_up_qtdlist(qtd, qh);
+			isp1760_urb_done(hcd, urb);
 
-		} else if (qtd->status & URB_COMPLETE_NOTIFY) {
+		} else if (last_qtd_of_urb(qtd, qh)) {
 
-			if (urb->status == -EINPROGRESS)
-				urb->status = 0;
+			if (qtd->urb->status == -EINPROGRESS)
+				qtd->urb->status = 0;
 
-			qtd = clean_this_qtd(qtd);
-			isp1760_urb_done(priv, urb, urb->status);
+			urb = qtd->urb;
+			qtd = clean_up_qtdlist(qtd, qh);
+			isp1760_urb_done(hcd, urb);
 
 		} else {
 			/* next QTD of this URB */
 
-			qtd = clean_this_qtd(qtd);
+			qtd = clean_this_qtd(qtd, qh);
 			BUG_ON(!qtd);
 		}
 
 		if (qtd)
-			enqueue_an_INT_packet(usb_hcd, qh, qtd);
+			enqueue_an_INT_packet(hcd, qh, qtd);
 
-		skip_map = isp1760_readl(usb_hcd->regs +
-				HC_INT_PTD_SKIPMAP_REG);
+		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 	}
 }
 
-#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
+static struct isp1760_qh *qh_make(struct usb_hcd *hcd, struct urb *urb,
 		gfp_t flags)
 {
 	struct isp1760_qh *qh;
 	int is_input, type;
 
-	qh = isp1760_qh_alloc(priv, flags);
+	qh = isp1760_qh_alloc(flags);
 	if (!qh)
 		return qh;
 
@@ -1353,29 +1311,6 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
 	is_input = usb_pipein(urb->pipe);
 	type = usb_pipetype(urb->pipe);
 
-	if (type == PIPE_INTERRUPT) {
-
-		if (urb->dev->speed == USB_SPEED_HIGH) {
-
-			qh->period = urb->interval >> 3;
-			if (qh->period == 0 && urb->interval != 1) {
-				/* NOTE interval 2 or 4 uframes could work.
-				 * But interval 1 scheduling is simpler, and
-				 * includes high bandwidth.
-				 */
-				printk(KERN_ERR "intr period %d uframes, NYET!",
-						urb->interval);
-				qh_destroy(qh);
-				return NULL;
-			}
-		} else {
-			qh->period = urb->interval;
-		}
-	}
-
-	/* support for tt scheduling, and access to toggles */
-	qh->dev = urb->dev;
-
 	if (!usb_pipecontrol(urb->pipe))
 		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input,
 				1);
@@ -1388,43 +1323,27 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
  * Returns null if it can't allocate a QH it needs to.
  * If the QH has TDs (urbs) already, that's great.
  */
-static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv,
+static struct isp1760_qh *qh_append_tds(struct usb_hcd *hcd,
 		struct urb *urb, struct list_head *qtd_list, int epnum,
 		void **ptr)
 {
 	struct isp1760_qh *qh;
-	struct isp1760_qtd *qtd;
-	struct isp1760_qtd *prev_qtd;
 
 	qh = (struct isp1760_qh *)*ptr;
 	if (!qh) {
 		/* can't sleep here, we have priv->lock... */
-		qh = qh_make(priv, urb, GFP_ATOMIC);
+		qh = qh_make(hcd, urb, GFP_ATOMIC);
 		if (!qh)
 			return qh;
 		*ptr = qh;
 	}
 
-	qtd = list_entry(qtd_list->next, struct isp1760_qtd,
-			qtd_list);
-	if (!list_empty(&qh->qtd_list))
-		prev_qtd = list_entry(qh->qtd_list.prev,
-				struct isp1760_qtd, qtd_list);
-	else
-		prev_qtd = NULL;
-
 	list_splice(qtd_list, qh->qtd_list.prev);
-	if (prev_qtd) {
-		BUG_ON(prev_qtd->hw_next);
-		prev_qtd->hw_next = qtd;
-	}
 
-	urb->hcpriv = qh;
 	return qh;
 }
 
-static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb,
-		struct list_head *qtd_list)
+static void qtd_list_free(struct urb *urb, struct list_head *qtd_list)
 {
 	struct list_head *entry, *temp;
 
@@ -1437,9 +1356,10 @@ static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb,
 	}
 }
 
-static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
+static int isp1760_prepare_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct isp1760_qtd         *qtd;
 	int                     epnum;
 	unsigned long           flags;
@@ -1451,11 +1371,11 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
 	epnum = urb->ep->desc.bEndpointAddress;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) {
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		rc = -ESHUTDOWN;
 		goto done;
 	}
-	rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb);
+	rc = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (rc)
 		goto done;
 
@@ -1465,25 +1385,24 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
 	else
 		qh_busy = 0;
 
-	qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv);
+	qh = qh_append_tds(hcd, urb, qtd_list, epnum, &urb->ep->hcpriv);
 	if (!qh) {
-		usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
 		rc = -ENOMEM;
 		goto done;
 	}
 
 	if (!qh_busy)
-		p(priv_to_hcd(priv), qh, qtd);
+		p(hcd, qh, qtd);
 
 done:
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (!qh)
-		qtd_list_free(priv, urb, qtd_list);
+		qtd_list_free(urb, qtd_list);
 	return rc;
 }
 
-static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv,
-		gfp_t flags)
+static struct isp1760_qtd *isp1760_qtd_alloc(gfp_t flags)
 {
 	struct isp1760_qtd *qtd;
 
@@ -1497,10 +1416,11 @@ static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv,
 /*
  * create a list of filled qtds for this URB; won't link into qh.
  */
-static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+static struct list_head *qh_urb_transaction(struct usb_hcd *hcd,
 		struct urb *urb, struct list_head *head, gfp_t flags)
 {
-	struct isp1760_qtd *qtd, *qtd_prev;
+	struct isp1760_qtd *qtd;
 	void *buf;
 	int len, maxpacket;
 	int is_input;
@@ -1509,7 +1429,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 	/*
 	 * URBs map to sequences of QTDs:  one logical transaction
 	 */
-	qtd = isp1760_qtd_alloc(priv, flags);
+	qtd = isp1760_qtd_alloc(flags);
 	if (!qtd)
 		return NULL;
 
@@ -1529,13 +1449,10 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 				token | SETUP_PID);
 
 		/* ... and always at least one more pid */
-		token ^= DATA_TOGGLE;
-		qtd_prev = qtd;
-		qtd = isp1760_qtd_alloc(priv, flags);
+		qtd = isp1760_qtd_alloc(flags);
 		if (!qtd)
 			goto cleanup;
 		qtd->urb = urb;
-		qtd_prev->hw_next = qtd;
 		list_add_tail(&qtd->qtd_list, head);
 
 		/* for zero length DATA stages, STATUS is always IN */
@@ -1565,7 +1482,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 
 		if (!buf && len) {
 			/* XXX This looks like usb storage / SCSI bug */
-			printk(KERN_ERR "buf is null, dma is %08lx len is %d\n",
+			dev_err(hcd->self.controller, "buf is null, dma is %08lx len is %d\n",
 					(long unsigned)urb->transfer_dma, len);
 			WARN_ON(1);
 		}
@@ -1574,19 +1491,13 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 		len -= this_qtd_len;
 		buf += this_qtd_len;
 
-		/* qh makes control packets use qtd toggle; maybe switch it */
-		if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
-			token ^= DATA_TOGGLE;
-
 		if (len <= 0)
 			break;
 
-		qtd_prev = qtd;
-		qtd = isp1760_qtd_alloc(priv, flags);
+		qtd = isp1760_qtd_alloc(flags);
 		if (!qtd)
 			goto cleanup;
 		qtd->urb = urb;
-		qtd_prev->hw_next = qtd;
 		list_add_tail(&qtd->qtd_list, head);
 	}
 
@@ -1601,20 +1512,16 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 			one_more = 1;
 			/* "in" <--> "out"  */
 			token ^= IN_PID;
-			/* force DATA1 */
-			token |= DATA_TOGGLE;
 		} else if (usb_pipebulk(urb->pipe)
 				&& (urb->transfer_flags & URB_ZERO_PACKET)
 				&& !(urb->transfer_buffer_length % maxpacket)) {
 			one_more = 1;
 		}
 		if (one_more) {
-			qtd_prev = qtd;
-			qtd = isp1760_qtd_alloc(priv, flags);
+			qtd = isp1760_qtd_alloc(flags);
 			if (!qtd)
 				goto cleanup;
 			qtd->urb = urb;
-			qtd_prev->hw_next = qtd;
 			list_add_tail(&qtd->qtd_list, head);
 
 			/* never any data in such packets */
@@ -1622,18 +1529,17 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
 		}
 	}
 
-	qtd->status = URB_COMPLETE_NOTIFY;
+	qtd->status = 0;
 	return head;
 
 cleanup:
-	qtd_list_free(priv, urb, head);
+	qtd_list_free(urb, head);
 	return NULL;
 }
 
 static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		gfp_t mem_flags)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct list_head qtd_list;
 	packet_enqueue *pe;
 
@@ -1642,29 +1548,27 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_CONTROL:
 	case PIPE_BULK:
-
-		if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+		if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags))
 			return -ENOMEM;
 		pe =  enqueue_an_ATL_packet;
 		break;
 
 	case PIPE_INTERRUPT:
-		if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+		if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags))
 			return -ENOMEM;
 		pe = enqueue_an_INT_packet;
 		break;
 
 	case PIPE_ISOCHRONOUS:
-		printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n");
+		dev_err(hcd->self.controller, "PIPE_ISOCHRONOUS ain't supported\n");
 	default:
 		return -EPIPE;
 	}
 
-	return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
+	return isp1760_prepare_enqueue(hcd, urb, &qtd_list, mem_flags, pe);
 }
 
-static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-		int status)
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct inter_packet_info *ints;
@@ -1681,7 +1585,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 	case PIPE_INTERRUPT:
 		ints = priv->int_ints;
-		reg_base = INT_REGS_OFFSET;
+		reg_base = INT_PTD_OFFSET;
 		or_reg = HC_INT_IRQ_MASK_OR_REG;
 		skip_reg = HC_INT_PTD_SKIPMAP_REG;
 		pe = enqueue_an_INT_packet;
@@ -1689,7 +1593,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 	default:
 		ints = priv->atl_ints;
-		reg_base = ATL_REGS_OFFSET;
+		reg_base = ATL_PTD_OFFSET;
 		or_reg = HC_ATL_IRQ_MASK_OR_REG;
 		skip_reg = HC_ATL_PTD_SKIPMAP_REG;
 		pe =  enqueue_an_ATL_packet;
@@ -1700,81 +1604,84 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 	spin_lock_irqsave(&priv->lock, flags);
 
 	for (i = 0; i < 32; i++) {
-		if (ints->urb == urb) {
+		if (!ints[i].qh)
+			continue;
+		BUG_ON(!ints[i].qtd);
+
+		if (ints[i].qtd->urb == urb) {
 			u32 skip_map;
 			u32 or_map;
 			struct isp1760_qtd *qtd;
-			struct isp1760_qh *qh = ints->qh;
+			struct isp1760_qh *qh;
 
-			skip_map = isp1760_readl(hcd->regs + skip_reg);
+			skip_map = reg_read32(hcd->regs, skip_reg);
 			skip_map |= 1 << i;
-			isp1760_writel(skip_map, hcd->regs + skip_reg);
+			reg_write32(hcd->regs, skip_reg, skip_map);
 
-			or_map = isp1760_readl(hcd->regs + or_reg);
+			or_map = reg_read32(hcd->regs, or_reg);
 			or_map &= ~(1 << i);
-			isp1760_writel(or_map, hcd->regs + or_reg);
+			reg_write32(hcd->regs, or_reg, or_map);
+
+			ptd_write(hcd->regs, reg_base, i, &ptd);
 
-			priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
-					+ i * sizeof(ptd), sizeof(ptd));
-			qtd = ints->qtd;
-			qtd = clean_up_qtdlist(qtd);
+			qtd = ints[i].qtd;
+			qh = ints[i].qh;
 
-			free_mem(priv, ints->payload);
+			free_mem(hcd, qtd);
+			qtd = clean_up_qtdlist(qtd, qh);
 
-			ints->urb = NULL;
-			ints->qh = NULL;
-			ints->qtd = NULL;
-			ints->data_buffer = NULL;
-			ints->payload = 0;
+			ints[i].qh = NULL;
+			ints[i].qtd = NULL;
 
-			isp1760_urb_done(priv, urb, status);
+			isp1760_urb_done(hcd, urb);
 			if (qtd)
 				pe(hcd, qh, qtd);
 			break;
 
-		} else if (ints->qtd) {
-			struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+		} else {
+			struct isp1760_qtd *qtd;
 
-			for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+			list_for_each_entry(qtd, &ints[i].qtd->qtd_list,
+								qtd_list) {
 				if (qtd->urb == urb) {
-					prev_qtd->hw_next = clean_up_qtdlist(qtd);
-					isp1760_urb_done(priv, urb, status);
+					clean_up_qtdlist(qtd, ints[i].qh);
+					isp1760_urb_done(hcd, urb);
+					qtd = NULL;
 					break;
 				}
-				prev_qtd = qtd;
 			}
-			/* we found the urb before the end of the list */
-			if (qtd)
+
+			/* We found the urb before the last slot */
+			if (!qtd)
 				break;
 		}
-		ints++;
 	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
 
-static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 imask;
 	irqreturn_t irqret = IRQ_NONE;
 
 	spin_lock(&priv->lock);
 
-	if (!(usb_hcd->state & HC_STATE_RUNNING))
+	if (!(hcd->state & HC_STATE_RUNNING))
 		goto leave;
 
-	imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG);
+	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
 	if (unlikely(!imask))
 		goto leave;
 
-	isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
-	if (imask & HC_ATL_INT)
-		do_atl_int(usb_hcd);
+	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask);
+	if (imask & (HC_ATL_INT | HC_SOT_INT))
+		do_atl_int(hcd);
 
 	if (imask & HC_INTL_INT)
-		do_intl_int(usb_hcd);
+		do_intl_int(hcd);
 
 	irqret = IRQ_HANDLED;
 leave:
@@ -1799,12 +1706,12 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
 	mask = PORT_CSC;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	temp = isp1760_readl(hcd->regs + HC_PORTSC1);
+	temp = reg_read32(hcd->regs, HC_PORTSC1);
 
 	if (temp & PORT_OWNER) {
 		if (temp & PORT_CSC) {
 			temp &= ~PORT_CSC;
-			isp1760_writel(temp, hcd->regs + HC_PORTSC1);
+			reg_write32(hcd->regs, HC_PORTSC1, temp);
 			goto done;
 		}
 	}
@@ -1844,9 +1751,9 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
 	temp = 1 + (ports / 8);
 	desc->bDescLength = 7 + 2 * temp;
 
-	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset(&desc->bitmap[0], 0, temp);
-	memset(&desc->bitmap[temp], 0xff, temp);
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
 
 	/* per-port overcurrent reporting */
 	temp = 0x0008;
@@ -1861,8 +1768,8 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
 
 #define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 
-static int check_reset_complete(struct isp1760_hcd *priv, int index,
-		u32 __iomem *status_reg, int port_status)
+static int check_reset_complete(struct usb_hcd *hcd, int index,
+		int port_status)
 {
 	if (!(port_status & PORT_CONNECT))
 		return port_status;
@@ -1870,15 +1777,17 @@ static int check_reset_complete(struct isp1760_hcd *priv, int index,
 	/* if reset finished and it's still not enabled -- handoff */
 	if (!(port_status & PORT_PE)) {
 
-		printk(KERN_ERR "port %d full speed --> companion\n",
-			index + 1);
+		dev_err(hcd->self.controller,
+					"port %d full speed --> companion\n",
+					index + 1);
 
 		port_status |= PORT_OWNER;
 		port_status &= ~PORT_RWC_BITS;
-		isp1760_writel(port_status, status_reg);
+		reg_write32(hcd->regs, HC_PORTSC1, port_status);
 
 	} else
-		printk(KERN_ERR "port %d high speed\n", index + 1);
+		dev_err(hcd->self.controller, "port %d high speed\n",
+								index + 1);
 
 	return port_status;
 }
@@ -1888,7 +1797,6 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	int ports = HCS_N_PORTS(priv->hcs_params);
-	u32 __iomem *status_reg = hcd->regs + HC_PORTSC1;
 	u32 temp, status;
 	unsigned long flags;
 	int retval = 0;
@@ -1917,7 +1825,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
-		temp = isp1760_readl(status_reg);
+		temp = reg_read32(hcd->regs, HC_PORTSC1);
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
@@ -1928,7 +1836,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			isp1760_writel(temp & ~PORT_PE, status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE);
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
 			/* XXX error? */
@@ -1942,8 +1850,8 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 					goto error;
 				/* resume signaling for 20 msec */
 				temp &= ~(PORT_RWC_BITS);
-				isp1760_writel(temp | PORT_RESUME,
-						status_reg);
+				reg_write32(hcd->regs, HC_PORTSC1,
+							temp | PORT_RESUME);
 				priv->reset_done = jiffies +
 					msecs_to_jiffies(20);
 			}
@@ -1953,11 +1861,11 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC(priv->hcs_params))
-				isp1760_writel(temp & ~PORT_POWER, status_reg);
+				reg_write32(hcd->regs, HC_PORTSC1,
+							temp & ~PORT_POWER);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
-			isp1760_writel(temp | PORT_CSC,
-					status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC);
 			break;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 			/* XXX error ?*/
@@ -1968,7 +1876,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		default:
 			goto error;
 		}
-		isp1760_readl(hcd->regs + HC_USBCMD);
+		reg_read32(hcd->regs, HC_USBCMD);
 		break;
 	case GetHubDescriptor:
 		isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
@@ -1983,7 +1891,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			goto error;
 		wIndex--;
 		status = 0;
-		temp = isp1760_readl(status_reg);
+		temp = reg_read32(hcd->regs, HC_PORTSC1);
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
@@ -1992,7 +1900,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		/* whoever resumes must GetPortStatus to complete it!! */
 		if (temp & PORT_RESUME) {
-			printk(KERN_ERR "Port resume should be skipped.\n");
+			dev_err(hcd->self.controller, "Port resume should be skipped.\n");
 
 			/* Remote Wakeup received? */
 			if (!priv->reset_done) {
@@ -2000,8 +1908,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 				priv->reset_done = jiffies
 						+ msecs_to_jiffies(20);
 				/* check the port again */
-				mod_timer(&priv_to_hcd(priv)->rh_timer,
-						priv->reset_done);
+				mod_timer(&hcd->rh_timer, priv->reset_done);
 			}
 
 			/* resume completed? */
@@ -2011,14 +1918,13 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 				priv->reset_done = 0;
 
 				/* stop resume signaling */
-				temp = isp1760_readl(status_reg);
-				isp1760_writel(
-					temp & ~(PORT_RWC_BITS | PORT_RESUME),
-					status_reg);
-				retval = handshake(priv, status_reg,
+				temp = reg_read32(hcd->regs, HC_PORTSC1);
+				reg_write32(hcd->regs, HC_PORTSC1,
+					temp & ~(PORT_RWC_BITS | PORT_RESUME));
+				retval = handshake(hcd, HC_PORTSC1,
 					   PORT_RESUME, 0, 2000 /* 2msec */);
 				if (retval != 0) {
-					isp1760_err(priv,
+					dev_err(hcd->self.controller,
 						"port %d resume error %d\n",
 						wIndex + 1, retval);
 					goto error;
@@ -2035,22 +1941,21 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			priv->reset_done = 0;
 
 			/* force reset to complete */
-			isp1760_writel(temp & ~PORT_RESET,
-					status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET);
 			/* REVISIT:  some hardware needs 550+ usec to clear
 			 * this bit; seems too long to spin routinely...
 			 */
-			retval = handshake(priv, status_reg,
+			retval = handshake(hcd, HC_PORTSC1,
 					PORT_RESET, 0, 750);
 			if (retval != 0) {
-				isp1760_err(priv, "port %d reset error %d\n",
+				dev_err(hcd->self.controller, "port %d reset error %d\n",
 						wIndex + 1, retval);
 				goto error;
 			}
 
 			/* see what we found out */
-			temp = check_reset_complete(priv, wIndex, status_reg,
-					isp1760_readl(status_reg));
+			temp = check_reset_complete(hcd, wIndex,
+					reg_read32(hcd->regs, HC_PORTSC1));
 		}
 		/*
 		 * Even if OWNER is set, there's no harm letting khubd
@@ -2059,12 +1964,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		 */
 
 		if (temp & PORT_OWNER)
-			printk(KERN_ERR "Warning: PORT_OWNER is set\n");
+			dev_err(hcd->self.controller, "PORT_OWNER is set\n");
 
 		if (temp & PORT_CONNECT) {
 			status |= USB_PORT_STAT_CONNECTION;
 			/* status may be from integrated TT */
-			status |= ehci_port_speed(priv, temp);
+			status |= USB_PORT_STAT_HIGH_SPEED;
 		}
 		if (temp & PORT_PE)
 			status |= USB_PORT_STAT_ENABLE;
@@ -2093,14 +1998,14 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
-		temp = isp1760_readl(status_reg);
+		temp = reg_read32(hcd->regs, HC_PORTSC1);
 		if (temp & PORT_OWNER)
 			break;
 
 /*		temp &= ~PORT_RWC_BITS; */
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			isp1760_writel(temp | PORT_PE, status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE);
 			break;
 
 		case USB_PORT_FEAT_SUSPEND:
@@ -2108,12 +2013,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 					|| (temp & PORT_RESET) != 0)
 				goto error;
 
-			isp1760_writel(temp | PORT_SUSPEND, status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND);
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC(priv->hcs_params))
-				isp1760_writel(temp | PORT_POWER,
-						status_reg);
+				reg_write32(hcd->regs, HC_PORTSC1,
+							temp | PORT_POWER);
 			break;
 		case USB_PORT_FEAT_RESET:
 			if (temp & PORT_RESUME)
@@ -2136,12 +2041,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 				priv->reset_done = jiffies +
 					msecs_to_jiffies(50);
 			}
-			isp1760_writel(temp, status_reg);
+			reg_write32(hcd->regs, HC_PORTSC1, temp);
 			break;
 		default:
 			goto error;
 		}
-		isp1760_readl(hcd->regs + HC_USBCMD);
+		reg_read32(hcd->regs, HC_USBCMD);
 		break;
 
 	default:
@@ -2153,10 +2058,10 @@ error:
 	return retval;
 }
 
-static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd,
+static void isp1760_endpoint_disable(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep)
 {
-	struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
 	unsigned long flags;
@@ -2176,16 +2081,16 @@ static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd,
 				qtd_list);
 
 		if (qtd->status & URB_ENQUEUED) {
-
 			spin_unlock_irqrestore(&priv->lock, flags);
-			isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET);
+			isp1760_urb_dequeue(hcd, qtd->urb, -ECONNRESET);
 			spin_lock_irqsave(&priv->lock, flags);
 		} else {
 			struct urb *urb;
 
 			urb = qtd->urb;
-			clean_up_qtdlist(qtd);
-			isp1760_urb_done(priv, urb, -ECONNRESET);
+			clean_up_qtdlist(qtd, qh);
+			urb->status = -ECONNRESET;
+			isp1760_urb_done(hcd, urb);
 		}
 	} while (1);
 
@@ -2203,7 +2108,7 @@ static int isp1760_get_frame(struct usb_hcd *hcd)
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 fr;
 
-	fr = isp1760_readl(hcd->regs + HC_FRINDEX);
+	fr = reg_read32(hcd->regs, HC_FRINDEX);
 	return (fr >> 3) % priv->periodic_size;
 }
 
@@ -2217,13 +2122,13 @@ static void isp1760_stop(struct usb_hcd *hcd)
 	mdelay(20);
 
 	spin_lock_irq(&priv->lock);
-	ehci_reset(priv);
+	ehci_reset(hcd);
 	/* Disable IRQ */
-	temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
-	isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
 	spin_unlock_irq(&priv->lock);
 
-	isp1760_writel(0, hcd->regs + HC_CONFIGFLAG);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, 0);
 }
 
 static void isp1760_shutdown(struct usb_hcd *hcd)
@@ -2231,12 +2136,12 @@ static void isp1760_shutdown(struct usb_hcd *hcd)
 	u32 command, temp;
 
 	isp1760_stop(hcd);
-	temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
-	isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
 
-	command = isp1760_readl(hcd->regs + HC_USBCMD);
+	command = reg_read32(hcd->regs, HC_USBCMD);
 	command &= ~CMD_RUN;
-	isp1760_writel(command, hcd->regs + HC_USBCMD);
+	reg_write32(hcd->regs, HC_USBCMD, command);
 }
 
 static const struct hc_driver isp1760_hc_driver = {
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6931ef5..8705076 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -69,6 +69,7 @@ void deinit_kmem_cache(void);
 
 #define HC_INTERRUPT_ENABLE	0x314
 #define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define INTERRUPT_ENABLE_SOT_MASK	(HC_INTL_INT | HC_SOT_INT | HC_EOT_INT)
 
 #define HC_ISO_INT		(1 << 9)
 #define HC_ATL_INT		(1 << 8)
@@ -83,37 +84,29 @@ void deinit_kmem_cache(void);
 #define HC_INT_IRQ_MASK_AND_REG	0x328
 #define HC_ATL_IRQ_MASK_AND_REG	0x32C
 
-/* Register sets */
-#define HC_BEGIN_OF_ATL		0x0c00
-#define HC_BEGIN_OF_INT		0x0800
-#define HC_BEGIN_OF_ISO		0x0400
-#define HC_BEGIN_OF_PAYLOAD	0x1000
-
 /* urb state*/
 #define DELETE_URB		(0x0008)
 #define NO_TRANSFER_ACTIVE	(0xffffffff)
 
-#define ATL_REGS_OFFSET		(0xc00)
-#define INT_REGS_OFFSET		(0x800)
-
-/* Philips Transfer Descriptor (PTD) */
+/* Philips Proprietary Transfer Descriptor (PTD) */
+typedef __u32 __bitwise __dw;
 struct ptd {
-	__le32 dw0;
-	__le32 dw1;
-	__le32 dw2;
-	__le32 dw3;
-	__le32 dw4;
-	__le32 dw5;
-	__le32 dw6;
-	__le32 dw7;
+	__dw dw0;
+	__dw dw1;
+	__dw dw2;
+	__dw dw3;
+	__dw dw4;
+	__dw dw5;
+	__dw dw6;
+	__dw dw7;
 };
+#define PTD_OFFSET		0x0400
+#define ISO_PTD_OFFSET		0x0400
+#define INT_PTD_OFFSET		0x0800
+#define ATL_PTD_OFFSET		0x0c00
+#define PAYLOAD_OFFSET		0x1000
 
 struct inter_packet_info {
-	void *data_buffer;
-	u32 payload;
-#define PTD_FIRE_NEXT		(1 << 0)
-#define PTD_URB_FINISHED	(1 << 1)
-	struct urb *urb;
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
 };
@@ -122,15 +115,6 @@ struct inter_packet_info {
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		struct isp1760_qtd *qtd);
 
-#define isp1760_dbg(priv, fmt, args...) \
-	dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args)
-
-#define isp1760_info(priv, fmt, args...) \
-	dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
-
-#define isp1760_err(priv, fmt, args...) \
-	dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
-
 /*
  * Device flags that can vary from board to board.  All of these
  * indicate the most "atypical" case, so that a devflags of 0 is
@@ -167,10 +151,8 @@ struct memory_chunk {
 #define BLOCK_2_SIZE 1024
 #define BLOCK_3_SIZE 8192
 #define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
-#define PAYLOAD_SIZE 0xf000
-
-/* I saw if some reloads if the pointer was negative */
-#define ISP1760_NULL_POINTER	(0x400)
+#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
+#define PAYLOAD_AREA_SIZE 0xf000
 
 /* ATL */
 /* DW0 */
@@ -224,6 +206,4 @@ struct memory_chunk {
 #define NAK_COUNTER	(0)
 #define ERR_COUNTER	(2)
 
-#define HC_ATL_PL_SIZE	(8192)
-
 #endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 759a12f..fb03575 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -75,6 +75,7 @@ static const char	hcd_name [] = "ohci_hcd";
 #define	STATECHANGE_DELAY	msecs_to_jiffies(300)
 
 #include "ohci.h"
+#include "pci-quirks.h"
 
 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 static int ohci_init (struct ohci_hcd *ohci);
@@ -85,18 +86,8 @@ static int ohci_restart (struct ohci_hcd *ohci);
 #endif
 
 #ifdef CONFIG_PCI
-static void quirk_amd_pll(int state);
-static void amd_iso_dev_put(void);
 static void sb800_prefetch(struct ohci_hcd *ohci, int on);
 #else
-static inline void quirk_amd_pll(int state)
-{
-	return;
-}
-static inline void amd_iso_dev_put(void)
-{
-	return;
-}
 static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	return;
@@ -912,7 +903,7 @@ static void ohci_stop (struct usb_hcd *hcd)
 	if (quirk_zfmicro(ohci))
 		del_timer(&ohci->unlink_watchdog);
 	if (quirk_amdiso(ohci))
-		amd_iso_dev_put();
+		usb_amd_dev_put();
 
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
@@ -1068,10 +1059,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_da8xx_driver
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7786)
+#ifdef CONFIG_USB_OHCI_SH
 #include "ohci-sh.c"
 #define PLATFORM_DRIVER		ohci_hcd_sh_driver
 #endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index cddcda9..9154615 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -580,15 +580,16 @@ ohci_hub_descriptor (
 	    temp |= 0x0008;
 	desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
 
-	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 	rh = roothub_b (ohci);
-	memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
-	desc->bitmap [0] = rh & RH_B_DR;
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR;
 	if (ohci->num_ports > 7) {
-		desc->bitmap [1] = (rh & RH_B_DR) >> 8;
-		desc->bitmap [2] = 0xff;
+		desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8;
+		desc->u.hs.DeviceRemovable[2] = 0xff;
 	} else
-		desc->bitmap [1] = 0xff;
+		desc->u.hs.DeviceRemovable[1] = 0xff;
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index a37d599..6048f2f 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -7,6 +7,7 @@
  * Copyright (C) 2007-2010 Texas Instruments, Inc.
  * Author: Vikram Pandita <vikram.pandita@ti.com>
  * Author: Anand Gadiyar <gadiyar@ti.com>
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  *
  * Based on ehci-omap.c and some other ohci glue layers
  *
@@ -24,150 +25,15 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Mar 10th, 2010):
+ * TODO (last updated Feb 27, 2011):
  *	- add kernel-doc
- *	- Factor out code common to EHCI to a separate file
- *	- Make EHCI and OHCI coexist together
- *	  - needs newer silicon versions to actually work
- *	  - the last one to be loaded currently steps on the other's toes
- *	- Add hooks for configuring transceivers, etc. at init/exit
- *	- Add aggressive clock-management code
  */
 
 #include <linux/platform_device.h>
-#include <linux/clk.h>
-
 #include <plat/usb.h>
 
-/*
- * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
- *	Use ohci_omap_readl()/ohci_omap_writel() functions
- */
-
-/* TLL Register Set */
-#define	OMAP_USBTLL_REVISION				(0x00)
-#define	OMAP_USBTLL_SYSCONFIG				(0x10)
-#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
-#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
-#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
-#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
-#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define	OMAP_USBTLL_SYSSTATUS				(0x14)
-#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
-
-#define	OMAP_USBTLL_IRQSTATUS				(0x18)
-#define	OMAP_USBTLL_IRQENABLE				(0x1C)
-
-#define	OMAP_TLL_SHARED_CONF				(0x30)
-#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
-#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
-#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
-#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
-#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
-
-#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
-#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
-#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
-#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
-#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
-#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
-#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
-#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
-
-#define OMAP_TLL_CHANNEL_COUNT				3
-
-/* UHH Register Set */
-#define	OMAP_UHH_REVISION				(0x00)
-#define	OMAP_UHH_SYSCONFIG				(0x10)
-#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
-#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
-#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
-#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
-#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
-#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define	OMAP_UHH_SYSSTATUS				(0x14)
-#define OMAP_UHH_SYSSTATUS_UHHRESETDONE			(1 << 0)
-#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE		(1 << 1)
-#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE		(1 << 2)
-#define	OMAP_UHH_HOSTCONFIG				(0x40)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
-#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
-#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
-#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
-#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
-#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
-#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
-#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
-#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
-
-#define	OMAP_UHH_DEBUG_CSR				(0x44)
-
 /*-------------------------------------------------------------------------*/
 
-static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val)
-{
-	__raw_writel(val, base + reg);
-}
-
-static inline u32 ohci_omap_readl(void __iomem *base, u32 reg)
-{
-	return __raw_readl(base + reg);
-}
-
-static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val)
-{
-	__raw_writeb(val, base + reg);
-}
-
-static inline u8 ohci_omap_readb(void __iomem *base, u8 reg)
-{
-	return __raw_readb(base + reg);
-}
-
-/*-------------------------------------------------------------------------*/
-
-struct ohci_hcd_omap3 {
-	struct ohci_hcd		*ohci;
-	struct device		*dev;
-
-	struct clk		*usbhost_ick;
-	struct clk		*usbhost2_120m_fck;
-	struct clk		*usbhost1_48m_fck;
-	struct clk		*usbtll_fck;
-	struct clk		*usbtll_ick;
-
-	/* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	void __iomem		*uhh_base;
-	void __iomem		*tll_base;
-	void __iomem		*ohci_base;
-
-	unsigned		es2_compatibility:1;
-};
-
-/*-------------------------------------------------------------------------*/
-
-static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on)
-{
-	if (on) {
-		clk_enable(omap->usbtll_ick);
-		clk_enable(omap->usbtll_fck);
-		clk_enable(omap->usbhost_ick);
-		clk_enable(omap->usbhost1_48m_fck);
-		clk_enable(omap->usbhost2_120m_fck);
-	} else {
-		clk_disable(omap->usbhost2_120m_fck);
-		clk_disable(omap->usbhost1_48m_fck);
-		clk_disable(omap->usbhost_ick);
-		clk_disable(omap->usbtll_fck);
-		clk_disable(omap->usbtll_ick);
-	}
-}
-
 static int ohci_omap3_init(struct usb_hcd *hcd)
 {
 	dev_dbg(hcd->self.controller, "starting OHCI controller\n");
@@ -175,7 +41,6 @@ static int ohci_omap3_init(struct usb_hcd *hcd)
 	return ohci_init(hcd_to_ohci(hcd));
 }
 
-
 /*-------------------------------------------------------------------------*/
 
 static int ohci_omap3_start(struct usb_hcd *hcd)
@@ -202,325 +67,6 @@ static int ohci_omap3_start(struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * convert the port-mode enum to a value we can use in the FSLSMODE
- * field of USBTLL_CHANNEL_CONF
- */
-static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode)
-{
-	switch (mode) {
-	case OMAP_OHCI_PORT_MODE_UNUSED:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-		return 0x0;
-
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-		return 0x1;
-
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-		return 0x2;
-
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-		return 0x3;
-
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-		return 0x4;
-
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		return 0x5;
-
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		return 0x6;
-
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		return 0x7;
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-		return 0xA;
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		return 0xB;
-	default:
-		pr_warning("Invalid port mode, using default\n");
-		return 0x0;
-	}
-}
-
-static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap)
-{
-	u32 reg;
-	int i;
-
-	/* Program TLL SHARED CONF */
-	reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
-	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
-	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
-	reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION;
-	reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON;
-	ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
-
-	/* Program each TLL channel */
-	/*
-	 * REVISIT: Only the 3-pin and 4-pin PHY modes have
-	 * actually been tested.
-	 */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
-
-		/* Enable only those channels that are actually used */
-		if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED)
-			continue;
-
-		reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
-		reg |= ohci_omap3_fslsmode(omap->port_mode[i])
-				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
-		reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
-		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
-		ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
-	}
-}
-
-/* omap3_start_ohci
- *	- Start the TI USBHOST controller
- */
-static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-	u32 reg = 0;
-	int ret = 0;
-
-	dev_dbg(omap->dev, "starting TI OHCI USB Controller\n");
-
-	/* Get all the clock handles we need */
-	omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
-	if (IS_ERR(omap->usbhost_ick)) {
-		dev_err(omap->dev, "could not get usbhost_ick\n");
-		ret =  PTR_ERR(omap->usbhost_ick);
-		goto err_host_ick;
-	}
-
-	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
-	if (IS_ERR(omap->usbhost2_120m_fck)) {
-		dev_err(omap->dev, "could not get usbhost_120m_fck\n");
-		ret = PTR_ERR(omap->usbhost2_120m_fck);
-		goto err_host_120m_fck;
-	}
-
-	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
-	if (IS_ERR(omap->usbhost1_48m_fck)) {
-		dev_err(omap->dev, "could not get usbhost_48m_fck\n");
-		ret = PTR_ERR(omap->usbhost1_48m_fck);
-		goto err_host_48m_fck;
-	}
-
-	omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
-	if (IS_ERR(omap->usbtll_fck)) {
-		dev_err(omap->dev, "could not get usbtll_fck\n");
-		ret = PTR_ERR(omap->usbtll_fck);
-		goto err_tll_fck;
-	}
-
-	omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
-	if (IS_ERR(omap->usbtll_ick)) {
-		dev_err(omap->dev, "could not get usbtll_ick\n");
-		ret = PTR_ERR(omap->usbtll_ick);
-		goto err_tll_ick;
-	}
-
-	/* Now enable all the clocks in the correct order */
-	ohci_omap3_clock_power(omap, 1);
-
-	/* perform TLL soft reset, and wait until reset is complete */
-	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
-	/* Wait for TLL reset to complete */
-	while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout)) {
-			dev_dbg(omap->dev, "operation timed out\n");
-			ret = -EINVAL;
-			goto err_sys_status;
-		}
-	}
-
-	dev_dbg(omap->dev, "TLL reset done\n");
-
-	/* (1<<3) = no idle mode only for initial debugging */
-	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
-			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
-			OMAP_USBTLL_SYSCONFIG_CACTIVITY);
-
-
-	/* Put UHH in NoIdle/NoStandby mode */
-	reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-	reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-			| OMAP_UHH_SYSCONFIG_SIDLEMODE
-			| OMAP_UHH_SYSCONFIG_CACTIVITY
-			| OMAP_UHH_SYSCONFIG_MIDLEMODE);
-	reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-	reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET;
-
-	ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
-	reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
-
-	/* setup ULPI bypass and burst configurations */
-	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
-			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
-			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
-	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
-
-	/*
-	 * REVISIT: Pi_CONNECT_STATUS controls MStandby
-	 * assertion and Swakeup generation - let us not
-	 * worry about this for now. OMAP HWMOD framework
-	 * might take care of this later. If not, we can
-	 * update these registers when adding aggressive
-	 * clock management code.
-	 *
-	 * For now, turn off all the Pi_CONNECT_STATUS bits
-	 *
-	if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-	 */
-	reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-	 if (omap->es2_compatibility) {
-		/*
-		 * All OHCI modes need to go through the TLL,
-		 * unlike in the EHCI case. So use UTMI mode
-		 * for all ports for OHCI, on ES2.x silicon
-		 */
-		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-	} else {
-		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-		else
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
-		if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-		else
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
-		if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		else
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-
-	}
-	ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
-	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
-
-	ohci_omap3_tll_config(omap);
-
-	return 0;
-
-err_sys_status:
-	ohci_omap3_clock_power(omap, 0);
-	clk_put(omap->usbtll_ick);
-
-err_tll_ick:
-	clk_put(omap->usbtll_fck);
-
-err_tll_fck:
-	clk_put(omap->usbhost1_48m_fck);
-
-err_host_48m_fck:
-	clk_put(omap->usbhost2_120m_fck);
-
-err_host_120m_fck:
-	clk_put(omap->usbhost_ick);
-
-err_host_ick:
-	return ret;
-}
-
-static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-
-	dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
-
-	/* Reset USBHOST for insmod/rmmod to work */
-	ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
-			OMAP_UHH_SYSCONFIG_SOFTRESET);
-	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& OMAP_UHH_SYSSTATUS_UHHRESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
-
-	while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-				& (1 << 0))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(omap->dev, "operation timed out\n");
-	}
-
-	ohci_omap3_clock_power(omap, 0);
-
-	if (omap->usbtll_fck != NULL) {
-		clk_put(omap->usbtll_fck);
-		omap->usbtll_fck = NULL;
-	}
-
-	if (omap->usbhost_ick != NULL) {
-		clk_put(omap->usbhost_ick);
-		omap->usbhost_ick = NULL;
-	}
-
-	if (omap->usbhost1_48m_fck != NULL) {
-		clk_put(omap->usbhost1_48m_fck);
-		omap->usbhost1_48m_fck = NULL;
-	}
-
-	if (omap->usbhost2_120m_fck != NULL) {
-		clk_put(omap->usbhost2_120m_fck);
-		omap->usbhost2_120m_fck = NULL;
-	}
-
-	if (omap->usbtll_ick != NULL) {
-		clk_put(omap->usbtll_ick);
-		omap->usbtll_ick = NULL;
-	}
-
-	dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
-}
-
-/*-------------------------------------------------------------------------*/
-
 static const struct hc_driver ohci_omap3_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"OMAP3 OHCI Host Controller",
@@ -580,107 +126,77 @@ static const struct hc_driver ohci_omap3_hc_driver = {
  */
 static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
-	struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
-	struct ohci_hcd_omap3 *omap;
-	struct resource *res;
-	struct usb_hcd *hcd;
-	int ret = -ENODEV;
-	int irq;
+	struct device		*dev = &pdev->dev;
+	struct usb_hcd		*hcd = NULL;
+	void __iomem		*regs = NULL;
+	struct resource		*res;
+	int			ret = -ENODEV;
+	int			irq;
 
 	if (usb_disabled())
-		goto err_disabled;
+		goto err_end;
 
-	if (!pdata) {
-		dev_dbg(&pdev->dev, "missing platform_data\n");
-		goto err_pdata;
+	if (!dev->parent) {
+		dev_err(dev, "Missing parent device\n");
+		return -ENODEV;
 	}
 
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_byname(pdev, "ohci-irq");
+	if (irq < 0) {
+		dev_err(dev, "OHCI irq failed\n");
+		return -ENODEV;
+	}
 
-	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
-	if (!omap) {
-		ret = -ENOMEM;
-		goto err_disabled;
+	res = platform_get_resource_byname(pdev,
+				IORESOURCE_MEM, "ohci");
+	if (!ret) {
+		dev_err(dev, "UHH OHCI get resource failed\n");
+		return -ENOMEM;
 	}
 
-	hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev,
-			dev_name(&pdev->dev));
-	if (!hcd) {
-		ret = -ENOMEM;
-		goto err_create_hcd;
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(dev, "UHH OHCI ioremap failed\n");
+		return -ENOMEM;
 	}
 
-	platform_set_drvdata(pdev, omap);
-	omap->dev		= &pdev->dev;
-	omap->port_mode[0]	= pdata->port_mode[0];
-	omap->port_mode[1]	= pdata->port_mode[1];
-	omap->port_mode[2]	= pdata->port_mode[2];
-	omap->es2_compatibility	= pdata->es2_compatibility;
-	omap->ohci		= hcd_to_ohci(hcd);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
+			dev_name(dev));
+	if (!hcd) {
+		dev_err(dev, "usb_create_hcd failed\n");
+		goto err_io;
+	}
 
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
+	hcd->regs =  regs;
 
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		dev_err(&pdev->dev, "OHCI ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	omap->uhh_base = ioremap(res->start, resource_size(res));
-	if (!omap->uhh_base) {
-		dev_err(&pdev->dev, "UHH ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_uhh_ioremap;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	omap->tll_base = ioremap(res->start, resource_size(res));
-	if (!omap->tll_base) {
-		dev_err(&pdev->dev, "TLL ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_tll_ioremap;
-	}
-
-	ret = omap3_start_ohci(omap, hcd);
+	ret = omap_usbhs_enable(dev);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to start ohci\n");
-		goto err_start;
+		dev_dbg(dev, "failed to start ohci\n");
+		goto err_end;
 	}
 
-	ohci_hcd_init(omap->ohci);
+	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
 	}
 
 	return 0;
 
 err_add_hcd:
-	omap3_stop_ohci(omap, hcd);
-
-err_start:
-	iounmap(omap->tll_base);
-
-err_tll_ioremap:
-	iounmap(omap->uhh_base);
-
-err_uhh_ioremap:
-	iounmap(hcd->regs);
+	omap_usbhs_disable(dev);
 
-err_ioremap:
+err_end:
 	usb_put_hcd(hcd);
 
-err_create_hcd:
-	kfree(omap);
-err_pdata:
-err_disabled:
+err_io:
+	iounmap(regs);
+
 	return ret;
 }
 
@@ -699,24 +215,20 @@ err_disabled:
  */
 static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
 {
-	struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ohci_to_hcd(omap->ohci);
+	struct device *dev	= &pdev->dev;
+	struct usb_hcd *hcd	= dev_get_drvdata(dev);
 
-	usb_remove_hcd(hcd);
-	omap3_stop_ohci(omap, hcd);
 	iounmap(hcd->regs);
-	iounmap(omap->tll_base);
-	iounmap(omap->uhh_base);
+	usb_remove_hcd(hcd);
+	omap_usbhs_disable(dev);
 	usb_put_hcd(hcd);
-	kfree(omap);
 
 	return 0;
 }
 
 static void ohci_hcd_omap3_shutdown(struct platform_device *pdev)
 {
-	struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev);
-	struct usb_hcd *hcd = ohci_to_hcd(omap->ohci);
+	struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
 
 	if (hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 36ee9a6..d84d6f0 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -22,24 +22,6 @@
 #include <linux/io.h>
 
 
-/* constants used to work around PM-related transfer
- * glitches in some AMD 700 series southbridges
- */
-#define AB_REG_BAR	0xf0
-#define AB_INDX(addr)	((addr) + 0x00)
-#define AB_DATA(addr)	((addr) + 0x04)
-#define AX_INDXC	0X30
-#define AX_DATAC	0x34
-
-#define NB_PCIE_INDX_ADDR	0xe0
-#define NB_PCIE_INDX_DATA	0xe4
-#define PCIE_P_CNTL		0x10040
-#define BIF_NB			0x10002
-
-static struct pci_dev *amd_smbus_dev;
-static struct pci_dev *amd_hb_dev;
-static int amd_ohci_iso_count;
-
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -168,15 +150,18 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 static int ohci_quirk_amd700(struct usb_hcd *hcd)
 {
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	u8 rev = 0;
+	struct pci_dev *amd_smbus_dev;
+	u8 rev;
 
-	if (!amd_smbus_dev)
-		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
-				PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (usb_amd_find_chipset_info())
+		ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
 	if (!amd_smbus_dev)
 		return 0;
 
-	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	rev = amd_smbus_dev->revision;
 
 	/* SB800 needs pre-fetch fix */
 	if ((rev >= 0x40) && (rev <= 0x4f)) {
@@ -184,19 +169,8 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 	}
 
-	if ((rev > 0x3b) || (rev < 0x30)) {
-		pci_dev_put(amd_smbus_dev);
-		amd_smbus_dev = NULL;
-		return 0;
-	}
-
-	amd_ohci_iso_count++;
-
-	if (!amd_hb_dev)
-		amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
-
-	ohci->flags |= OHCI_QUIRK_AMD_ISO;
-	ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
 
 	return 0;
 }
@@ -215,74 +189,6 @@ static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
 	return 0;
 }
 
-/*
- * The hardware normally enables the A-link power management feature, which
- * lets the system lower the power consumption in idle states.
- *
- * Assume the system is configured to have USB 1.1 ISO transfers going
- * to or from a USB device.  Without this quirk, that stream may stutter
- * or have breaks occasionally.  For transfers going to speakers, this
- * makes a very audible mess...
- *
- * That audio playback corruption is due to the audio stream getting
- * interrupted occasionally when the link goes in lower power state
- * This USB quirk prevents the link going into that lower power state
- * during audio playback or other ISO operations.
- */
-static void quirk_amd_pll(int on)
-{
-	u32 addr;
-	u32 val;
-	u32 bit = (on > 0) ? 1 : 0;
-
-	pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
-
-	/* BIT names/meanings are NDA-protected, sorry ... */
-
-	outl(AX_INDXC, AB_INDX(addr));
-	outl(0x40, AB_DATA(addr));
-	outl(AX_DATAC, AB_INDX(addr));
-	val = inl(AB_DATA(addr));
-	val &= ~((1 << 3) | (1 << 4) | (1 << 9));
-	val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
-	outl(val, AB_DATA(addr));
-
-	if (amd_hb_dev) {
-		addr = PCIE_P_CNTL;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
-
-		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
-		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
-		val |= bit | (bit << 3) | (bit << 12);
-		val |= ((!bit) << 4) | ((!bit) << 9);
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
-
-		addr = BIF_NB;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
-
-		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
-		val &= ~(1 << 8);
-		val |= bit << 8;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
-	}
-}
-
-static void amd_iso_dev_put(void)
-{
-	amd_ohci_iso_count--;
-	if (amd_ohci_iso_count == 0) {
-		if (amd_smbus_dev) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-		}
-		if (amd_hb_dev) {
-			pci_dev_put(amd_hb_dev);
-			amd_hb_dev = NULL;
-		}
-	}
-
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 83094d0..dd24fc1 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -52,7 +52,7 @@ __acquires(ohci->lock)
 		ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
 		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
 			if (quirk_amdiso(ohci))
-				quirk_amd_pll(1);
+				usb_amd_quirk_pll_enable();
 			if (quirk_amdprefetch(ohci))
 				sb800_prefetch(ohci, 0);
 		}
@@ -686,7 +686,7 @@ static void td_submit_urb (
 		}
 		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
 			if (quirk_amdiso(ohci))
-				quirk_amd_pll(0);
+				usb_amd_quirk_pll_disable();
 			if (quirk_amdprefetch(ohci))
 				sb800_prefetch(ohci, 1);
 		}
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 51facb9..bad11a7 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -401,7 +401,7 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
 #define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
-#define	OHCI_QUIRK_AMD_ISO	0x200			/* ISO transfers*/
+#define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
 #define	OHCI_QUIRK_SHUTDOWN	0x800			/* nVidia power bug */
 	// there are also chip quirks/bugs in init logic
@@ -433,7 +433,7 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 }
 static inline int quirk_amdiso(struct ohci_hcd *ohci)
 {
-	return ohci->flags & OHCI_QUIRK_AMD_ISO;
+	return ohci->flags & OHCI_QUIRK_AMD_PLL;
 }
 static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
 {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index e0cb12b..38193f4 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -451,9 +451,9 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu,
 	temp = 1 + (ports / 8);
 	desc->bDescLength = 7 + 2 * temp;
 
-	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset(&desc->bitmap[0], 0, temp);
-	memset(&desc->bitmap[temp], 0xff, temp);
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
 
 	temp = 0x0008;			/* per-port overcurrent reporting */
 	if (HCS_PPC(oxu->hcs_params))
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 4c502c8..1d586d4 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -52,6 +52,264 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* AMD quirk use */
+#define	AB_REG_BAR_LOW		0xe0
+#define	AB_REG_BAR_HIGH		0xe1
+#define	AB_REG_BAR_SB700	0xf0
+#define	AB_INDX(addr)		((addr) + 0x00)
+#define	AB_DATA(addr)		((addr) + 0x04)
+#define	AX_INDXC		0x30
+#define	AX_DATAC		0x34
+
+#define	NB_PCIE_INDX_ADDR	0xe0
+#define	NB_PCIE_INDX_DATA	0xe4
+#define	PCIE_P_CNTL		0x10040
+#define	BIF_NB			0x10002
+#define	NB_PIF0_PWRDOWN_0	0x01100012
+#define	NB_PIF0_PWRDOWN_1	0x01100013
+
+static struct amd_chipset_info {
+	struct pci_dev	*nb_dev;
+	struct pci_dev	*smbus_dev;
+	int nb_type;
+	int sb_type;
+	int isoc_reqs;
+	int probe_count;
+	int probe_result;
+} amd_chipset;
+
+static DEFINE_SPINLOCK(amd_lock);
+
+int usb_amd_find_chipset_info(void)
+{
+	u8 rev = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	amd_chipset.probe_count++;
+	/* probe only once */
+	if (amd_chipset.probe_count > 1) {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return amd_chipset.probe_result;
+	}
+
+	amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (amd_chipset.smbus_dev) {
+		rev = amd_chipset.smbus_dev->revision;
+		if (rev >= 0x40)
+			amd_chipset.sb_type = 1;
+		else if (rev >= 0x30 && rev <= 0x3b)
+			amd_chipset.sb_type = 3;
+	} else {
+		amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+							0x780b, NULL);
+		if (!amd_chipset.smbus_dev) {
+			spin_unlock_irqrestore(&amd_lock, flags);
+			return 0;
+		}
+		rev = amd_chipset.smbus_dev->revision;
+		if (rev >= 0x11 && rev <= 0x18)
+			amd_chipset.sb_type = 2;
+	}
+
+	if (amd_chipset.sb_type == 0) {
+		if (amd_chipset.smbus_dev) {
+			pci_dev_put(amd_chipset.smbus_dev);
+			amd_chipset.smbus_dev = NULL;
+		}
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return 0;
+	}
+
+	amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+	if (amd_chipset.nb_dev) {
+		amd_chipset.nb_type = 1;
+	} else {
+		amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+							0x1510, NULL);
+		if (amd_chipset.nb_dev) {
+			amd_chipset.nb_type = 2;
+		} else  {
+			amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+								0x9600, NULL);
+			if (amd_chipset.nb_dev)
+				amd_chipset.nb_type = 3;
+		}
+	}
+
+	amd_chipset.probe_result = 1;
+	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
+
+	spin_unlock_irqrestore(&amd_lock, flags);
+	return amd_chipset.probe_result;
+}
+EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * This USB quirk prevents the link going into that lower power state
+ * during isochronous transfers.
+ *
+ * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
+ * some AMD platforms may stutter or have breaks occasionally.
+ */
+static void usb_amd_quirk_pll(int disable)
+{
+	u32 addr, addr_low, addr_high, val;
+	u32 bit = disable ? 0 : 1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	if (disable) {
+		amd_chipset.isoc_reqs++;
+		if (amd_chipset.isoc_reqs > 1) {
+			spin_unlock_irqrestore(&amd_lock, flags);
+			return;
+		}
+	} else {
+		amd_chipset.isoc_reqs--;
+		if (amd_chipset.isoc_reqs > 0) {
+			spin_unlock_irqrestore(&amd_lock, flags);
+			return;
+		}
+	}
+
+	if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) {
+		outb_p(AB_REG_BAR_LOW, 0xcd6);
+		addr_low = inb_p(0xcd7);
+		outb_p(AB_REG_BAR_HIGH, 0xcd6);
+		addr_high = inb_p(0xcd7);
+		addr = addr_high << 8 | addr_low;
+
+		outl_p(0x30, AB_INDX(addr));
+		outl_p(0x40, AB_DATA(addr));
+		outl_p(0x34, AB_INDX(addr));
+		val = inl_p(AB_DATA(addr));
+	} else if (amd_chipset.sb_type == 3) {
+		pci_read_config_dword(amd_chipset.smbus_dev,
+					AB_REG_BAR_SB700, &addr);
+		outl(AX_INDXC, AB_INDX(addr));
+		outl(0x40, AB_DATA(addr));
+		outl(AX_DATAC, AB_INDX(addr));
+		val = inl(AB_DATA(addr));
+	} else {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	if (disable) {
+		val &= ~0x08;
+		val |= (1 << 4) | (1 << 9);
+	} else {
+		val |= 0x08;
+		val &= ~((1 << 4) | (1 << 9));
+	}
+	outl_p(val, AB_DATA(addr));
+
+	if (!amd_chipset.nb_dev) {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
+		addr = PCIE_P_CNTL;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+
+		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+		val |= bit | (bit << 3) | (bit << 12);
+		val |= ((!bit) << 4) | ((!bit) << 9);
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+
+		addr = BIF_NB;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 << 8);
+		val |= bit << 8;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+	} else if (amd_chipset.nb_type == 2) {
+		addr = NB_PIF0_PWRDOWN_0;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+
+		addr = NB_PIF0_PWRDOWN_1;
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_chipset.nb_dev,
+					NB_PCIE_INDX_DATA, val);
+	}
+
+	spin_unlock_irqrestore(&amd_lock, flags);
+	return;
+}
+
+void usb_amd_quirk_pll_disable(void)
+{
+	usb_amd_quirk_pll(1);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
+
+void usb_amd_quirk_pll_enable(void)
+{
+	usb_amd_quirk_pll(0);
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
+
+void usb_amd_dev_put(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_lock, flags);
+
+	amd_chipset.probe_count--;
+	if (amd_chipset.probe_count > 0) {
+		spin_unlock_irqrestore(&amd_lock, flags);
+		return;
+	}
+
+	if (amd_chipset.nb_dev) {
+		pci_dev_put(amd_chipset.nb_dev);
+		amd_chipset.nb_dev = NULL;
+	}
+	if (amd_chipset.smbus_dev) {
+		pci_dev_put(amd_chipset.smbus_dev);
+		amd_chipset.smbus_dev = NULL;
+	}
+	amd_chipset.nb_type = 0;
+	amd_chipset.sb_type = 0;
+	amd_chipset.isoc_reqs = 0;
+	amd_chipset.probe_result = 0;
+
+	spin_unlock_irqrestore(&amd_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_amd_dev_put);
 
 /*
  * Make sure the controller is completely inactive, unable to
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 1564edf..6ae9f78 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -1,7 +1,17 @@
 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
+#ifdef CONFIG_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+int usb_amd_find_chipset_info(void);
+void usb_amd_dev_put(void);
+void usb_amd_quirk_pll_disable(void);
+void usb_amd_quirk_pll_enable(void);
+#else
+static inline void usb_amd_quirk_pll_disable(void) {}
+static inline void usb_amd_quirk_pll_enable(void) {}
+static inline void usb_amd_dev_put(void) {}
+#endif  /* CONFIG_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 3076b1c..db6f8b9 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2150,8 +2150,9 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
 	desc->bDescLength = 9;
 	desc->bPwrOn2PwrGood = 0;
 	desc->wHubCharacteristics = cpu_to_le16(0x0011);
-	desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1;
-	desc->bitmap[1] = ~0;
+	desc->u.hs.DeviceRemovable[0] =
+		((1 << r8a66597->max_root_hub) - 1) << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
 }
 
 static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 2e9602a..18b7099 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1111,9 +1111,9 @@ sl811h_hub_descriptor (
 
 	desc->wHubCharacteristics = cpu_to_le16(temp);
 
-	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-	desc->bitmap[0] = 0 << 1;
-	desc->bitmap[1] = ~0;
+	/* ports removable, and legacy PortPwrCtrlMask */
+	desc->u.hs.DeviceRemovable[0] = 0 << 1;
+	desc->u.hs.DeviceRemovable[1] = ~0;
 }
 
 static void
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index fab7649..b478593 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2604,13 +2604,14 @@ static int u132_roothub_descriptor(struct u132 *u132,
 	retval = u132_read_pcimem(u132, roothub.b, &rh_b);
 	if (retval)
 		return retval;
-	memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
-	desc->bitmap[0] = rh_b & RH_B_DR;
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	desc->u.hs.DeviceRemovable[0] = rh_b & RH_B_DR;
 	if (u132->num_ports > 7) {
-		desc->bitmap[1] = (rh_b & RH_B_DR) >> 8;
-		desc->bitmap[2] = 0xff;
+		desc->u.hs.DeviceRemovable[1] = (rh_b & RH_B_DR) >> 8;
+		desc->u.hs.DeviceRemovable[2] = 0xff;
 	} else
-		desc->bitmap[1] = 0xff;
+		desc->u.hs.DeviceRemovable[1] = 0xff;
 	return 0;
 }
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index cee8678..4f65b14 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -471,7 +471,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 
 /*
  * Store the current frame number in uhci->frame_number if the controller
- * is runnning.  Expand from 11 bits (of which we use only 10) to a
+ * is running.  Expand from 11 bits (of which we use only 10) to a
  * full-sized integer.
  *
  * Like many other parts of the driver, this code relies on being polled
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 78c4eda..ce5c9e5 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -19,8 +19,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */
-#define XHCI_MAX_HALT_USEC	(16*125)
+/* Up to 16 ms to halt an HC */
+#define XHCI_MAX_HALT_USEC	(16*1000)
 /* HC not running - set to 1 when run/stop bit is cleared. */
 #define XHCI_STS_HALT		(1<<0)
 
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 5d963e3..a78f2eb 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -28,27 +28,15 @@
 #define	PORT_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
 			 PORT_RC | PORT_PLC | PORT_PE)
 
-static void xhci_hub_descriptor(struct xhci_hcd *xhci,
-		struct usb_hub_descriptor *desc)
+static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc, int ports)
 {
-	int ports;
 	u16 temp;
 
-	ports = HCS_MAX_PORTS(xhci->hcs_params1);
-
-	/* USB 3.0 hubs have a different descriptor, but we fake this for now */
-	desc->bDescriptorType = 0x29;
 	desc->bPwrOn2PwrGood = 10;	/* xhci section 5.4.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
 	desc->bNbrPorts = ports;
-	temp = 1 + (ports / 8);
-	desc->bDescLength = 7 + 2 * temp;
-
-	/* Why does core/hcd.h define bitmap?  It's just confusing. */
-	memset(&desc->DeviceRemovable[0], 0, temp);
-	memset(&desc->DeviceRemovable[temp], 0xff, temp);
-
 	/* Ugh, these should be #defines, FIXME */
 	/* Using table 11-13 in USB 2.0 spec. */
 	temp = 0;
@@ -65,14 +53,108 @@ static void xhci_hub_descriptor(struct xhci_hcd *xhci,
 	desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
 }
 
+/* Fill in the USB 2.0 roothub descriptor */
+static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+	__u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
+	u32 portsc;
+	unsigned int i;
+
+	ports = xhci->num_usb2_ports;
+
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = 0x29;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* The Device Removable bits are reported on a byte granularity.
+	 * If the port doesn't exist within that byte, the bit is set to 0.
+	 */
+	memset(port_removable, 0, sizeof(port_removable));
+	for (i = 0; i < ports; i++) {
+		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		/* If a device is removable, PORTSC reports a 0, same as in the
+		 * hub descriptor DeviceRemovable bits.
+		 */
+		if (portsc & PORT_DEV_REMOVE)
+			/* This math is hairy because bit 0 of DeviceRemovable
+			 * is reserved, and bit 1 is for port 1, etc.
+			 */
+			port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
+	}
+
+	/* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
+	 * ports on it.  The USB 2.0 specification says that there are two
+	 * variable length fields at the end of the hub descriptor:
+	 * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
+	 * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
+	 * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
+	 * 0xFF, so we initialize the both arrays (DeviceRemovable and
+	 * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
+	 * set of ports that actually exist.
+	 */
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	memset(desc->u.hs.PortPwrCtrlMask, 0xff,
+			sizeof(desc->u.hs.PortPwrCtrlMask));
+
+	for (i = 0; i < (ports + 1 + 7) / 8; i++)
+		memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
+				sizeof(__u8));
+}
+
+/* Fill in the USB 3.0 roothub descriptor */
+static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 port_removable;
+	u32 portsc;
+	unsigned int i;
+
+	ports = xhci->num_usb3_ports;
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = 0x2a;
+	desc->bDescLength = 12;
+
+	/* header decode latency should be zero for roothubs,
+	 * see section 4.23.5.2.
+	 */
+	desc->u.ss.bHubHdrDecLat = 0;
+	desc->u.ss.wHubDelay = 0;
+
+	port_removable = 0;
+	/* bit 0 is reserved, bit 1 is for port 1, etc. */
+	for (i = 0; i < ports; i++) {
+		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		if (portsc & PORT_DEV_REMOVE)
+			port_removable |= 1 << (i + 1);
+	}
+	memset(&desc->u.ss.DeviceRemovable,
+			(__force __u16) cpu_to_le16(port_removable),
+			sizeof(__u16));
+}
+
+static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+
+	if (hcd->speed == HCD_USB3)
+		xhci_usb3_hub_descriptor(hcd, xhci, desc);
+	else
+		xhci_usb2_hub_descriptor(hcd, xhci, desc);
+
+}
+
 static unsigned int xhci_port_speed(unsigned int port_status)
 {
 	if (DEV_LOWSPEED(port_status))
 		return USB_PORT_STAT_LOW_SPEED;
 	if (DEV_HIGHSPEED(port_status))
 		return USB_PORT_STAT_HIGH_SPEED;
-	if (DEV_SUPERSPEED(port_status))
-		return USB_PORT_STAT_SUPER_SPEED;
 	/*
 	 * FIXME: Yes, we should check for full speed, but the core uses that as
 	 * a default in portspeed() in usb/core/hub.c (which is the only place
@@ -135,17 +217,22 @@ u32 xhci_port_state_to_neutral(u32 state)
 
 /*
  * find slot id based on port number.
+ * @port: The one-based port number from one of the two split roothubs.
  */
-int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port)
+int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 port)
 {
 	int slot_id;
 	int i;
+	enum usb_device_speed speed;
 
 	slot_id = 0;
 	for (i = 0; i < MAX_HC_SLOTS; i++) {
 		if (!xhci->devs[i])
 			continue;
-		if (xhci->devs[i]->port == port) {
+		speed = xhci->devs[i]->udev->speed;
+		if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
+				&& xhci->devs[i]->port == port) {
 			slot_id = i;
 			break;
 		}
@@ -226,11 +313,11 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 	return;
 }
 
-static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
-		u32 __iomem *addr, u32 port_status)
+static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 wIndex, u32 __iomem *addr, u32 port_status)
 {
 	/* Don't allow the USB core to disable SuperSpeed ports. */
-	if (xhci->port_array[wIndex] == 0x03) {
+	if (hcd->speed == HCD_USB3) {
 		xhci_dbg(xhci, "Ignoring request to disable "
 				"SuperSpeed port.\n");
 		return;
@@ -289,10 +376,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	unsigned long flags;
 	u32 temp, temp1, status;
 	int retval = 0;
-	u32 __iomem *addr;
+	u32 __iomem **port_array;
 	int slot_id;
-
-	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	struct xhci_bus_state *bus_state;
+
+	if (hcd->speed == HCD_USB3) {
+		ports = xhci->num_usb3_ports;
+		port_array = xhci->usb3_ports;
+	} else {
+		ports = xhci->num_usb2_ports;
+		port_array = xhci->usb2_ports;
+	}
+	bus_state = &xhci->bus_state[hcd_index(hcd)];
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	switch (typeReq) {
@@ -301,17 +396,35 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		memset(buf, 0, 4);
 		break;
 	case GetHubDescriptor:
-		xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
+		/* Check to make sure userspace is asking for the USB 3.0 hub
+		 * descriptor for the USB 3.0 roothub.  If not, we stall the
+		 * endpoint, like external hubs do.
+		 */
+		if (hcd->speed == HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			xhci_dbg(xhci, "Wrong hub descriptor type for "
+					"USB 3.0 roothub.\n");
+			goto error;
+		}
+		xhci_hub_descriptor(hcd, xhci,
+				(struct usb_hub_descriptor *) buf);
 		break;
 	case GetPortStatus:
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
 		status = 0;
-		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
-		temp = xhci_readl(xhci, addr);
+		temp = xhci_readl(xhci, port_array[wIndex]);
+		if (temp == 0xffffffff) {
+			retval = -ENODEV;
+			break;
+		}
 		xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 
+		/* FIXME - should we return a port status value like the USB
+		 * 3.0 external hubs do?
+		 */
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
 			status |= USB_PORT_STAT_C_CONNECTION << 16;
@@ -330,38 +443,33 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			if ((temp & PORT_RESET) || !(temp & PORT_PE))
 				goto error;
 			if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies,
-						xhci->resume_done[wIndex])) {
+						bus_state->resume_done[wIndex])) {
 				xhci_dbg(xhci, "Resume USB2 port %d\n",
 					wIndex + 1);
-				xhci->resume_done[wIndex] = 0;
+				bus_state->resume_done[wIndex] = 0;
 				temp1 = xhci_port_state_to_neutral(temp);
 				temp1 &= ~PORT_PLS_MASK;
 				temp1 |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp1, addr);
+				xhci_writel(xhci, temp1, port_array[wIndex]);
 
 				xhci_dbg(xhci, "set port %d resume\n",
 					wIndex + 1);
-				slot_id = xhci_find_slot_id_by_port(xhci,
+				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 								 wIndex + 1);
 				if (!slot_id) {
 					xhci_dbg(xhci, "slot_id is zero\n");
 					goto error;
 				}
 				xhci_ring_device(xhci, slot_id);
-				xhci->port_c_suspend[wIndex >> 5] |=
-						1 << (wIndex & 31);
-				xhci->suspended_ports[wIndex >> 5] &=
-						~(1 << (wIndex & 31));
+				bus_state->port_c_suspend |= 1 << wIndex;
+				bus_state->suspended_ports &= ~(1 << wIndex);
 			}
 		}
 		if ((temp & PORT_PLS_MASK) == XDEV_U0
 			&& (temp & PORT_POWER)
-			&& (xhci->suspended_ports[wIndex >> 5] &
-			    (1 << (wIndex & 31)))) {
-			xhci->suspended_ports[wIndex >> 5] &=
-					~(1 << (wIndex & 31));
-			xhci->port_c_suspend[wIndex >> 5] |=
-					1 << (wIndex & 31);
+			&& (bus_state->suspended_ports & (1 << wIndex))) {
+			bus_state->suspended_ports &= ~(1 << wIndex);
+			bus_state->port_c_suspend |= 1 << wIndex;
 		}
 		if (temp & PORT_CONNECT) {
 			status |= USB_PORT_STAT_CONNECTION;
@@ -375,7 +483,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
 			status |= USB_PORT_STAT_POWER;
-		if (xhci->port_c_suspend[wIndex >> 5] & (1 << (wIndex & 31)))
+		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
@@ -385,12 +493,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
-		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
-		temp = xhci_readl(xhci, addr);
+		temp = xhci_readl(xhci, port_array[wIndex]);
+		if (temp == 0xffffffff) {
+			retval = -ENODEV;
+			break;
+		}
 		temp = xhci_port_state_to_neutral(temp);
+		/* FIXME: What new port features do we need to support? */
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			temp = xhci_readl(xhci, addr);
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			/* In spec software should not attempt to suspend
 			 * a port unless the port reports that it is in the
 			 * enabled (PED = ‘1’,PLS < ‘3’) state.
@@ -402,7 +514,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
-			slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1);
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					wIndex + 1);
 			if (!slot_id) {
 				xhci_warn(xhci, "slot_id is zero\n");
 				goto error;
@@ -415,15 +528,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_port_state_to_neutral(temp);
 			temp &= ~PORT_PLS_MASK;
 			temp |= PORT_LINK_STROBE | XDEV_U3;
-			xhci_writel(xhci, temp, addr);
+			xhci_writel(xhci, temp, port_array[wIndex]);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(10); /* wait device to enter */
 			spin_lock_irqsave(&xhci->lock, flags);
 
-			temp = xhci_readl(xhci, addr);
-			xhci->suspended_ports[wIndex >> 5] |=
-					1 << (wIndex & (31));
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			bus_state->suspended_ports |= 1 << wIndex;
 			break;
 		case USB_PORT_FEAT_POWER:
 			/*
@@ -432,34 +544,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			 * However, khubd will ignore the roothub events until
 			 * the roothub is registered.
 			 */
-			xhci_writel(xhci, temp | PORT_POWER, addr);
+			xhci_writel(xhci, temp | PORT_POWER,
+					port_array[wIndex]);
 
-			temp = xhci_readl(xhci, addr);
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
 		case USB_PORT_FEAT_RESET:
 			temp = (temp | PORT_RESET);
-			xhci_writel(xhci, temp, addr);
+			xhci_writel(xhci, temp, port_array[wIndex]);
 
-			temp = xhci_readl(xhci, addr);
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
 		default:
 			goto error;
 		}
-		temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+		/* unblock any posted writes */
+		temp = xhci_readl(xhci, port_array[wIndex]);
 		break;
 	case ClearPortFeature:
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
-		addr = &xhci->op_regs->port_status_base +
-			NUM_PORT_REGS*(wIndex & 0xff);
-		temp = xhci_readl(xhci, addr);
+		temp = xhci_readl(xhci, port_array[wIndex]);
+		if (temp == 0xffffffff) {
+			retval = -ENODEV;
+			break;
+		}
+		/* FIXME: What new port features do we need to support? */
 		temp = xhci_port_state_to_neutral(temp);
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			temp = xhci_readl(xhci, addr);
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
 			xhci_dbg(xhci, "PORTSC %04x\n", temp);
 			if (temp & PORT_RESET)
@@ -471,30 +588,34 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 					temp = xhci_port_state_to_neutral(temp);
 					temp &= ~PORT_PLS_MASK;
 					temp |= PORT_LINK_STROBE | XDEV_U0;
-					xhci_writel(xhci, temp, addr);
-					xhci_readl(xhci, addr);
+					xhci_writel(xhci, temp,
+							port_array[wIndex]);
+					xhci_readl(xhci, port_array[wIndex]);
 				} else {
 					temp = xhci_port_state_to_neutral(temp);
 					temp &= ~PORT_PLS_MASK;
 					temp |= PORT_LINK_STROBE | XDEV_RESUME;
-					xhci_writel(xhci, temp, addr);
+					xhci_writel(xhci, temp,
+							port_array[wIndex]);
 
 					spin_unlock_irqrestore(&xhci->lock,
 							       flags);
 					msleep(20);
 					spin_lock_irqsave(&xhci->lock, flags);
 
-					temp = xhci_readl(xhci, addr);
+					temp = xhci_readl(xhci,
+							port_array[wIndex]);
 					temp = xhci_port_state_to_neutral(temp);
 					temp &= ~PORT_PLS_MASK;
 					temp |= PORT_LINK_STROBE | XDEV_U0;
-					xhci_writel(xhci, temp, addr);
+					xhci_writel(xhci, temp,
+							port_array[wIndex]);
 				}
-				xhci->port_c_suspend[wIndex >> 5] |=
-						1 << (wIndex & 31);
+				bus_state->port_c_suspend |= 1 << wIndex;
 			}
 
-			slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1);
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					wIndex + 1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto error;
@@ -502,17 +623,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			xhci_ring_device(xhci, slot_id);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
-			xhci->port_c_suspend[wIndex >> 5] &=
-					~(1 << (wIndex & 31));
+			bus_state->port_c_suspend &= ~(1 << wIndex);
 		case USB_PORT_FEAT_C_RESET:
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 		case USB_PORT_FEAT_C_ENABLE:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
-					addr, temp);
+					port_array[wIndex], temp);
 			break;
 		case USB_PORT_FEAT_ENABLE:
-			xhci_disable_port(xhci, wIndex, addr, temp);
+			xhci_disable_port(hcd, xhci, wIndex,
+					port_array[wIndex], temp);
 			break;
 		default:
 			goto error;
@@ -543,9 +664,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	int i, retval;
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int ports;
-	u32 __iomem *addr;
-
-	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	u32 __iomem **port_array;
+	struct xhci_bus_state *bus_state;
+
+	if (hcd->speed == HCD_USB3) {
+		ports = xhci->num_usb3_ports;
+		port_array = xhci->usb3_ports;
+	} else {
+		ports = xhci->num_usb2_ports;
+		port_array = xhci->usb2_ports;
+	}
+	bus_state = &xhci->bus_state[hcd_index(hcd)];
 
 	/* Initial status is no changes */
 	retval = (ports + 8) / 8;
@@ -557,13 +686,15 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
 	for (i = 0; i < ports; i++) {
-		addr = &xhci->op_regs->port_status_base +
-			NUM_PORT_REGS*i;
-		temp = xhci_readl(xhci, addr);
+		temp = xhci_readl(xhci, port_array[i]);
+		if (temp == 0xffffffff) {
+			retval = -ENODEV;
+			break;
+		}
 		if ((temp & mask) != 0 ||
-			(xhci->port_c_suspend[i >> 5] &	1 << (i & 31)) ||
-			(xhci->resume_done[i] && time_after_eq(
-			    jiffies, xhci->resume_done[i]))) {
+			(bus_state->port_c_suspend & 1 << i) ||
+			(bus_state->resume_done[i] && time_after_eq(
+			    jiffies, bus_state->resume_done[i]))) {
 			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 			status = 1;
 		}
@@ -577,42 +708,51 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 int xhci_bus_suspend(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int port;
+	int max_ports, port_index;
+	u32 __iomem **port_array;
+	struct xhci_bus_state *bus_state;
 	unsigned long flags;
 
-	xhci_dbg(xhci, "suspend root hub\n");
+	if (hcd->speed == HCD_USB3) {
+		max_ports = xhci->num_usb3_ports;
+		port_array = xhci->usb3_ports;
+		xhci_dbg(xhci, "suspend USB 3.0 root hub\n");
+	} else {
+		max_ports = xhci->num_usb2_ports;
+		port_array = xhci->usb2_ports;
+		xhci_dbg(xhci, "suspend USB 2.0 root hub\n");
+	}
+	bus_state = &xhci->bus_state[hcd_index(hcd)];
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		port = HCS_MAX_PORTS(xhci->hcs_params1);
-		while (port--) {
-			if (xhci->resume_done[port] != 0) {
+		port_index = max_ports;
+		while (port_index--) {
+			if (bus_state->resume_done[port_index] != 0) {
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				xhci_dbg(xhci, "suspend failed because "
 						"port %d is resuming\n",
-						port + 1);
+						port_index + 1);
 				return -EBUSY;
 			}
 		}
 	}
 
-	port = HCS_MAX_PORTS(xhci->hcs_params1);
-	xhci->bus_suspended = 0;
-	while (port--) {
+	port_index = max_ports;
+	bus_state->bus_suspended = 0;
+	while (port_index--) {
 		/* suspend the port if the port is not suspended */
-		u32 __iomem *addr;
 		u32 t1, t2;
 		int slot_id;
 
-		addr = &xhci->op_regs->port_status_base +
-			NUM_PORT_REGS * (port & 0xff);
-		t1 = xhci_readl(xhci, addr);
+		t1 = xhci_readl(xhci, port_array[port_index]);
 		t2 = xhci_port_state_to_neutral(t1);
 
 		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
-			xhci_dbg(xhci, "port %d not suspended\n", port);
-			slot_id = xhci_find_slot_id_by_port(xhci, port + 1);
+			xhci_dbg(xhci, "port %d not suspended\n", port_index);
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					port_index + 1);
 			if (slot_id) {
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				xhci_stop_device(xhci, slot_id, 1);
@@ -620,7 +760,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			}
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
-			set_bit(port, &xhci->bus_suspended);
+			set_bit(port_index, &bus_state->bus_suspended);
 		}
 		if (hcd->self.root_hub->do_remote_wakeup) {
 			if (t1 & PORT_CONNECT) {
@@ -635,22 +775,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 
 		t1 = xhci_port_state_to_neutral(t1);
 		if (t1 != t2)
-			xhci_writel(xhci, t2, addr);
+			xhci_writel(xhci, t2, port_array[port_index]);
 
 		if (DEV_HIGHSPEED(t1)) {
 			/* enable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
 
-			addr = &xhci->op_regs->port_power_base +
-				NUM_PORT_REGS * (port & 0xff);
+			/* Add one to the port status register address to get
+			 * the port power control register address.
+			 */
+			addr = port_array[port_index] + 1;
 			tmp = xhci_readl(xhci, addr);
 			tmp |= PORT_RWE;
 			xhci_writel(xhci, tmp, addr);
 		}
 	}
 	hcd->state = HC_STATE_SUSPENDED;
-	xhci->next_statechange = jiffies + msecs_to_jiffies(10);
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return 0;
 }
@@ -658,13 +800,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 int xhci_bus_resume(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int port;
+	int max_ports, port_index;
+	u32 __iomem **port_array;
+	struct xhci_bus_state *bus_state;
 	u32 temp;
 	unsigned long flags;
 
-	xhci_dbg(xhci, "resume root hub\n");
+	if (hcd->speed == HCD_USB3) {
+		max_ports = xhci->num_usb3_ports;
+		port_array = xhci->usb3_ports;
+		xhci_dbg(xhci, "resume USB 3.0 root hub\n");
+	} else {
+		max_ports = xhci->num_usb2_ports;
+		port_array = xhci->usb2_ports;
+		xhci_dbg(xhci, "resume USB 2.0 root hub\n");
+	}
+	bus_state = &xhci->bus_state[hcd_index(hcd)];
 
-	if (time_before(jiffies, xhci->next_statechange))
+	if (time_before(jiffies, bus_state->next_statechange))
 		msleep(5);
 
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -678,57 +831,57 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 	temp &= ~CMD_EIE;
 	xhci_writel(xhci, temp, &xhci->op_regs->command);
 
-	port = HCS_MAX_PORTS(xhci->hcs_params1);
-	while (port--) {
+	port_index = max_ports;
+	while (port_index--) {
 		/* Check whether need resume ports. If needed
 		   resume port and disable remote wakeup */
-		u32 __iomem *addr;
 		u32 temp;
 		int slot_id;
 
-		addr = &xhci->op_regs->port_status_base +
-			NUM_PORT_REGS * (port & 0xff);
-		temp = xhci_readl(xhci, addr);
+		temp = xhci_readl(xhci, port_array[port_index]);
 		if (DEV_SUPERSPEED(temp))
 			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
 		else
 			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
-		if (test_bit(port, &xhci->bus_suspended) &&
+		if (test_bit(port_index, &bus_state->bus_suspended) &&
 		    (temp & PORT_PLS_MASK)) {
 			if (DEV_SUPERSPEED(temp)) {
 				temp = xhci_port_state_to_neutral(temp);
 				temp &= ~PORT_PLS_MASK;
 				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, addr);
+				xhci_writel(xhci, temp, port_array[port_index]);
 			} else {
 				temp = xhci_port_state_to_neutral(temp);
 				temp &= ~PORT_PLS_MASK;
 				temp |= PORT_LINK_STROBE | XDEV_RESUME;
-				xhci_writel(xhci, temp, addr);
+				xhci_writel(xhci, temp, port_array[port_index]);
 
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(20);
 				spin_lock_irqsave(&xhci->lock, flags);
 
-				temp = xhci_readl(xhci, addr);
+				temp = xhci_readl(xhci, port_array[port_index]);
 				temp = xhci_port_state_to_neutral(temp);
 				temp &= ~PORT_PLS_MASK;
 				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, addr);
+				xhci_writel(xhci, temp, port_array[port_index]);
 			}
-			slot_id = xhci_find_slot_id_by_port(xhci, port + 1);
+			slot_id = xhci_find_slot_id_by_port(hcd,
+					xhci, port_index + 1);
 			if (slot_id)
 				xhci_ring_device(xhci, slot_id);
 		} else
-			xhci_writel(xhci, temp, addr);
+			xhci_writel(xhci, temp, port_array[port_index]);
 
 		if (DEV_HIGHSPEED(temp)) {
 			/* disable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
 
-			addr = &xhci->op_regs->port_power_base +
-				NUM_PORT_REGS * (port & 0xff);
+			/* Add one to the port status register address to get
+			 * the port power control register address.
+			 */
+			addr = port_array[port_index] + 1;
 			tmp = xhci_readl(xhci, addr);
 			tmp &= ~PORT_RWE;
 			xhci_writel(xhci, tmp, addr);
@@ -737,8 +890,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 
 	(void) xhci_readl(xhci, &xhci->op_regs->command);
 
-	xhci->next_statechange = jiffies + msecs_to_jiffies(5);
-	hcd->state = HC_STATE_RUNNING;
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
 	/* re-enable irqs */
 	temp = xhci_readl(xhci, &xhci->op_regs->command);
 	temp |= CMD_EIE;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a953439..a003e79 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -814,14 +814,64 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
 	ep0_ctx->deq |= ep_ring->cycle_state;
 }
 
+/*
+ * The xHCI roothub may have ports of differing speeds in any order in the port
+ * status registers.  xhci->port_array provides an array of the port speed for
+ * each offset into the port status registers.
+ *
+ * The xHCI hardware wants to know the roothub port number that the USB device
+ * is attached to (or the roothub port its ancestor hub is attached to).  All we
+ * know is the index of that port under either the USB 2.0 or the USB 3.0
+ * roothub, but that doesn't give us the real index into the HW port status
+ * registers.  Scan through the xHCI roothub port array, looking for the Nth
+ * entry of the correct port speed.  Return the port number of that entry.
+ */
+static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct usb_device *top_dev;
+	unsigned int num_similar_speed_ports;
+	unsigned int faked_port_num;
+	int i;
+
+	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+			top_dev = top_dev->parent)
+		/* Found device below root hub */;
+	faked_port_num = top_dev->portnum;
+	for (i = 0, num_similar_speed_ports = 0;
+			i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+		u8 port_speed = xhci->port_array[i];
+
+		/*
+		 * Skip ports that don't have known speeds, or have duplicate
+		 * Extended Capabilities port speed entries.
+		 */
+		if (port_speed == 0 || port_speed == -1)
+			continue;
+
+		/*
+		 * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
+		 * 1.1 ports are under the USB 2.0 hub.  If the port speed
+		 * matches the device speed, it's a similar speed port.
+		 */
+		if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
+			num_similar_speed_ports++;
+		if (num_similar_speed_ports == faked_port_num)
+			/* Roothub ports are numbered from 1 to N */
+			return i+1;
+	}
+	return 0;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
-	struct usb_device	*top_dev;
 	struct xhci_slot_ctx    *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
+	u32			port_num;
+	struct usb_device *top_dev;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -863,16 +913,20 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		BUG();
 	}
 	/* Find the root hub port this device is under */
+	port_num = xhci_find_real_port_number(xhci, udev);
+	if (!port_num)
+		return -EINVAL;
+	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num);
+	/* Set the port number in the virtual_device to the faked port number */
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
 	dev->port = top_dev->portnum;
-	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
+	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port);
 
-	/* Is this a LS/FS device under a HS hub? */
-	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
-			udev->tt) {
+	/* Is this a LS/FS device under an external HS hub? */
+	if (udev->tt && udev->tt->hub->parent) {
 		slot_ctx->tt_info = udev->tt->hub->slot_id;
 		slot_ctx->tt_info |= udev->ttport << 8;
 		if (udev->tt->multi)
@@ -1452,7 +1506,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
-	xhci->bus_suspended = 0;
+	xhci->bus_state[0].bus_suspended = 0;
+	xhci->bus_state[1].bus_suspended = 0;
 }
 
 static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
@@ -1748,6 +1803,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	}
 	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
 			xhci->num_usb2_ports, xhci->num_usb3_ports);
+
+	/* Place limits on the number of roothub ports so that the hub
+	 * descriptors aren't longer than the USB core will allocate.
+	 */
+	if (xhci->num_usb3_ports > 15) {
+		xhci_dbg(xhci, "Limiting USB 3.0 roothub ports to 15.\n");
+		xhci->num_usb3_ports = 15;
+	}
+	if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
+		xhci_dbg(xhci, "Limiting USB 2.0 roothub ports to %u.\n",
+				USB_MAXCHILDREN);
+		xhci->num_usb2_ports = USB_MAXCHILDREN;
+	}
+
 	/*
 	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
 	 * Not sure how the USB core will handle a hub with no ports...
@@ -1772,6 +1841,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 					"addr = %p\n", i,
 					xhci->usb2_ports[port_index]);
 			port_index++;
+			if (port_index == xhci->num_usb2_ports)
+				break;
 		}
 	}
 	if (xhci->num_usb3_ports) {
@@ -1790,6 +1861,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 						"addr = %p\n", i,
 						xhci->usb3_ports[port_index]);
 				port_index++;
+				if (port_index == xhci->num_usb3_ports)
+					break;
 			}
 	}
 	return 0;
@@ -1971,8 +2044,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	init_completion(&xhci->addr_dev);
 	for (i = 0; i < MAX_HC_SLOTS; ++i)
 		xhci->devs[i] = NULL;
-	for (i = 0; i < MAX_HC_PORTS; ++i)
-		xhci->resume_done[i] = 0;
+	for (i = 0; i < USB_MAXCHILDREN; ++i) {
+		xhci->bus_state[0].resume_done[i] = 0;
+		xhci->bus_state[1].resume_done[i] = 0;
+	}
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index bb668a8..ceea9f3 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -50,13 +50,45 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
-	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct xhci_hcd		*xhci;
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval;
 	u32			temp;
 
 	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
 
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+		if (!xhci)
+			return -ENOMEM;
+		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
+		xhci->main_hcd = hcd;
+		/* Mark the first roothub as being USB 2.0.
+		 * The xHCI driver will register the USB 3.0 roothub.
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+		/*
+		 * USB 2.0 roothub under xHCI has an integrated TT,
+		 * (rate matching hub) as opposed to having an OHCI/UHCI
+		 * companion controller.
+		 */
+		hcd->has_tt = 1;
+	} else {
+		/* xHCI private pointer was set in xhci_pci_probe for the second
+		 * registered roothub.
+		 */
+		xhci = hcd_to_xhci(hcd);
+		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+		if (HCC_64BIT_ADDR(temp)) {
+			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+		} else {
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+		}
+		return 0;
+	}
+
 	xhci->cap_regs = hcd->regs;
 	xhci->op_regs = hcd->regs +
 		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
@@ -85,13 +117,13 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
-		return retval;
+		goto error;
 
 	xhci_dbg(xhci, "Resetting HCD\n");
 	/* Reset the internal HC memory state and registers. */
 	retval = xhci_reset(xhci);
 	if (retval)
-		return retval;
+		goto error;
 	xhci_dbg(xhci, "Reset complete\n");
 
 	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
@@ -106,14 +138,85 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	/* Initialize HCD and host controller data structures. */
 	retval = xhci_init(hcd);
 	if (retval)
-		return retval;
+		goto error;
 	xhci_dbg(xhci, "Called HCD init\n");
 
 	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
 	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
 
 	/* Find any debug ports */
-	return xhci_pci_reinit(xhci, pdev);
+	retval = xhci_pci_reinit(xhci, pdev);
+	if (!retval)
+		return retval;
+
+error:
+	kfree(xhci);
+	return retval;
+}
+
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+	struct xhci_hcd *xhci;
+	struct hc_driver *driver;
+	struct usb_hcd *hcd;
+
+	driver = (struct hc_driver *)id->driver_data;
+	/* Register the USB 2.0 roothub.
+	 * FIXME: USB core must know to register the USB 2.0 roothub first.
+	 * This is sort of silly, because we could just set the HCD driver flags
+	 * to say USB 2.0, but I'm not sure what the implications would be in
+	 * the other parts of the HCD code.
+	 */
+	retval = usb_hcd_pci_probe(dev, id);
+
+	if (retval)
+		return retval;
+
+	/* USB 2.0 roothub is stored in the PCI device now. */
+	hcd = dev_get_drvdata(&dev->dev);
+	xhci = hcd_to_xhci(hcd);
+	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
+				pci_name(dev), hcd);
+	if (!xhci->shared_hcd) {
+		retval = -ENOMEM;
+		goto dealloc_usb2_hcd;
+	}
+
+	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
+	 * is called by usb_add_hcd().
+	 */
+	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
+
+	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+			IRQF_DISABLED | IRQF_SHARED);
+	if (retval)
+		goto put_usb3_hcd;
+	/* Roothub already marked as USB 3.0 speed */
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+	usb_hcd_pci_remove(dev);
+	return retval;
+}
+
+static void xhci_pci_remove(struct pci_dev *dev)
+{
+	struct xhci_hcd *xhci;
+
+	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+	if (xhci->shared_hcd) {
+		usb_remove_hcd(xhci->shared_hcd);
+		usb_put_hcd(xhci->shared_hcd);
+	}
+	usb_hcd_pci_remove(dev);
+	kfree(xhci);
 }
 
 #ifdef CONFIG_PM
@@ -122,7 +225,8 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int	retval = 0;
 
-	if (hcd->state != HC_STATE_SUSPENDED)
+	if (hcd->state != HC_STATE_SUSPENDED ||
+			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
 	retval = xhci_suspend(xhci);
@@ -143,13 +247,13 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 static const struct hc_driver xhci_pci_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"xHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct xhci_hcd),
+	.hcd_priv_size =	sizeof(struct xhci_hcd *),
 
 	/*
 	 * generic hardware linkage
 	 */
 	.irq =			xhci_irq,
-	.flags =		HCD_MEMORY | HCD_USB3,
+	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
 
 	/*
 	 * basic lifecycle operations
@@ -210,8 +314,8 @@ static struct pci_driver xhci_pci_driver = {
 	.name =		(char *) hcd_name,
 	.id_table =	pci_ids,
 
-	.probe =	usb_hcd_pci_probe,
-	.remove =	usb_hcd_pci_remove,
+	.probe =	xhci_pci_probe,
+	.remove =	xhci_pci_remove,
 	/* suspend and resume implemented later */
 
 	.shutdown = 	usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3289bf4..cfc1ad9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -380,10 +380,8 @@ static struct xhci_segment *find_trb_seg(
 	while (cur_seg->trbs > trb ||
 			&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
 		generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
-		if ((generic_trb->field[3] & TRB_TYPE_BITMASK) ==
-				TRB_TYPE(TRB_LINK) &&
-				(generic_trb->field[3] & LINK_TOGGLE))
-			*cycle_state = ~(*cycle_state) & 0x1;
+		if (generic_trb->field[3] & LINK_TOGGLE)
+			*cycle_state ^= 0x1;
 		cur_seg = cur_seg->next;
 		if (cur_seg == start_seg)
 			/* Looped over the entire list.  Oops! */
@@ -497,18 +495,29 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	trb = &state->new_deq_ptr->generic;
 	if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
 				(trb->field[3] & LINK_TOGGLE))
-		state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
+		state->new_cycle_state ^= 0x1;
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
+	/*
+	 * If there is only one segment in a ring, find_trb_seg()'s while loop
+	 * will not run, and it will return before it has a chance to see if it
+	 * needs to toggle the cycle bit.  It can't tell if the stalled transfer
+	 * ended just before the link TRB on a one-segment ring, or if the TD
+	 * wrapped around the top of the ring, because it doesn't have the TD in
+	 * question.  Look for the one-segment case where stalled TRB's address
+	 * is greater than the new dequeue pointer address.
+	 */
+	if (ep_ring->first_seg == ep_ring->first_seg->next &&
+			state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
+		state->new_cycle_state ^= 0x1;
+	xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state);
+
 	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
 			state->new_deq_seg);
 	addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
 	xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
 			(unsigned long long) addr);
-	xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
-	ep_ring->dequeue = state->new_deq_ptr;
-	ep_ring->deq_seg = state->new_deq_seg;
 }
 
 static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
@@ -599,13 +608,14 @@ static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
 static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 		struct xhci_td *cur_td, int status, char *adjective)
 {
-	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct usb_hcd *hcd;
 	struct urb	*urb;
 	struct urb_priv	*urb_priv;
 
 	urb = cur_td->urb;
 	urb_priv = urb->hcpriv;
 	urb_priv->td_cnt++;
+	hcd = bus_to_hcd(urb->dev->bus);
 
 	/* Only giveback urb when this is the last td in urb */
 	if (urb_priv->td_cnt == urb_priv->length) {
@@ -824,8 +834,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
-		 * disabled, so we can set HC_STATE_HALT and notify the
-		 * USB core.  But if we call usb_hc_died(), it will attempt to
+		 * disabled. If we call usb_hc_died(), it will attempt to
 		 * disconnect all device drivers under this host.  Those
 		 * disconnect() methods will wait for all URBs to be unlinked,
 		 * so we must complete them.
@@ -870,9 +879,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 		}
 	}
 	spin_unlock(&xhci->lock);
-	xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
-	usb_hc_died(xhci_to_hcd(xhci));
+	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
 }
 
@@ -951,9 +959,26 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 	} else {
 		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
 				ep_ctx->deq);
+		if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg,
+					dev->eps[ep_index].queued_deq_ptr) ==
+				(ep_ctx->deq & ~(EP_CTX_CYCLE_MASK))) {
+			/* Update the ring's dequeue segment and dequeue pointer
+			 * to reflect the new position.
+			 */
+			ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg;
+			ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr;
+		} else {
+			xhci_warn(xhci, "Mismatch between completed Set TR Deq "
+					"Ptr command & xHCI internal state.\n");
+			xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
+					dev->eps[ep_index].queued_deq_seg,
+					dev->eps[ep_index].queued_deq_ptr);
+		}
 	}
 
 	dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
+	dev->eps[ep_index].queued_deq_seg = NULL;
+	dev->eps[ep_index].queued_deq_ptr = NULL;
 	/* Restart any rings with pending URBs */
 	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 }
@@ -1118,7 +1143,6 @@ bandwidth_change:
 		handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
 		break;
 	case TRB_TYPE(TRB_CMD_NOOP):
-		++xhci->noops_handled;
 		break;
 	case TRB_TYPE(TRB_RESET_EP):
 		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
@@ -1162,15 +1186,55 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
 		handle_cmd_completion(xhci, &event->event_cmd);
 }
 
+/* @port_id: the one-based port ID from the hardware (indexed from array of all
+ * port registers -- USB 3.0 and USB 2.0).
+ *
+ * Returns a zero-based port number, which is suitable for indexing into each of
+ * the split roothubs' port arrays and bus state arrays.
+ */
+static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
+		struct xhci_hcd *xhci, u32 port_id)
+{
+	unsigned int i;
+	unsigned int num_similar_speed_ports = 0;
+
+	/* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
+	 * and usb2_ports are 0-based indexes.  Count the number of similar
+	 * speed ports, up to 1 port before this port.
+	 */
+	for (i = 0; i < (port_id - 1); i++) {
+		u8 port_speed = xhci->port_array[i];
+
+		/*
+		 * Skip ports that don't have known speeds, or have duplicate
+		 * Extended Capabilities port speed entries.
+		 */
+		if (port_speed == 0 || port_speed == -1)
+			continue;
+
+		/*
+		 * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
+		 * 1.1 ports are under the USB 2.0 hub.  If the port speed
+		 * matches the device speed, it's a similar speed port.
+		 */
+		if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
+			num_similar_speed_ports++;
+	}
+	return num_similar_speed_ports;
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
-	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct usb_hcd *hcd;
 	u32 port_id;
 	u32 temp, temp1;
-	u32 __iomem *addr;
-	int ports;
+	int max_ports;
 	int slot_id;
+	unsigned int faked_port_index;
+	u8 major_revision;
+	struct xhci_bus_state *bus_state;
+	u32 __iomem **port_array;
 
 	/* Port status change events always have a successful completion code */
 	if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
@@ -1180,14 +1244,50 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	port_id = GET_PORT_ID(event->generic.field[0]);
 	xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
 
-	ports = HCS_MAX_PORTS(xhci->hcs_params1);
-	if ((port_id <= 0) || (port_id > ports)) {
+	max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	if ((port_id <= 0) || (port_id > max_ports)) {
 		xhci_warn(xhci, "Invalid port id %d\n", port_id);
 		goto cleanup;
 	}
 
-	addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
-	temp = xhci_readl(xhci, addr);
+	/* Figure out which usb_hcd this port is attached to:
+	 * is it a USB 3.0 port or a USB 2.0/1.1 port?
+	 */
+	major_revision = xhci->port_array[port_id - 1];
+	if (major_revision == 0) {
+		xhci_warn(xhci, "Event for port %u not in "
+				"Extended Capabilities, ignoring.\n",
+				port_id);
+		goto cleanup;
+	}
+	if (major_revision == (u8) -1) {
+		xhci_warn(xhci, "Event for port %u duplicated in"
+				"Extended Capabilities, ignoring.\n",
+				port_id);
+		goto cleanup;
+	}
+
+	/*
+	 * Hardware port IDs reported by a Port Status Change Event include USB
+	 * 3.0 and USB 2.0 ports.  We want to check if the port has reported a
+	 * resume event, but we first need to translate the hardware port ID
+	 * into the index into the ports on the correct split roothub, and the
+	 * correct bus_state structure.
+	 */
+	/* Find the right roothub. */
+	hcd = xhci_to_hcd(xhci);
+	if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+		hcd = xhci->shared_hcd;
+	bus_state = &xhci->bus_state[hcd_index(hcd)];
+	if (hcd->speed == HCD_USB3)
+		port_array = xhci->usb3_ports;
+	else
+		port_array = xhci->usb2_ports;
+	/* Find the faked port hub number */
+	faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
+			port_id);
+
+	temp = xhci_readl(xhci, port_array[faked_port_index]);
 	if (hcd->state == HC_STATE_SUSPENDED) {
 		xhci_dbg(xhci, "resume root hub\n");
 		usb_hcd_resume_root_hub(hcd);
@@ -1207,8 +1307,9 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			temp = xhci_port_state_to_neutral(temp);
 			temp &= ~PORT_PLS_MASK;
 			temp |= PORT_LINK_STROBE | XDEV_U0;
-			xhci_writel(xhci, temp, addr);
-			slot_id = xhci_find_slot_id_by_port(xhci, port_id);
+			xhci_writel(xhci, temp, port_array[faked_port_index]);
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					faked_port_index);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto cleanup;
@@ -1216,16 +1317,16 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_ring_device(xhci, slot_id);
 			xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
 			/* Clear PORT_PLC */
-			temp = xhci_readl(xhci, addr);
+			temp = xhci_readl(xhci, port_array[faked_port_index]);
 			temp = xhci_port_state_to_neutral(temp);
 			temp |= PORT_PLC;
-			xhci_writel(xhci, temp, addr);
+			xhci_writel(xhci, temp, port_array[faked_port_index]);
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
-			xhci->resume_done[port_id - 1] = jiffies +
+			bus_state->resume_done[faked_port_index] = jiffies +
 				msecs_to_jiffies(20);
 			mod_timer(&hcd->rh_timer,
-				  xhci->resume_done[port_id - 1]);
+				  bus_state->resume_done[faked_port_index]);
 			/* Do the rest in GetPortStatus */
 		}
 	}
@@ -1236,7 +1337,7 @@ cleanup:
 
 	spin_unlock(&xhci->lock);
 	/* Pass this up to the core */
-	usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
+	usb_hcd_poll_rh_status(hcd);
 	spin_lock(&xhci->lock);
 }
 
@@ -1990,12 +2091,12 @@ cleanup:
 					trb_comp_code != COMP_BABBLE))
 				xhci_urb_free_priv(xhci, urb_priv);
 
-			usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+			usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
 			xhci_dbg(xhci, "Giveback URB %p, len = %d, "
 					"status = %d\n",
 					urb, urb->actual_length, status);
 			spin_unlock(&xhci->lock);
-			usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+			usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
 			spin_lock(&xhci->lock);
 		}
 
@@ -2119,7 +2220,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
 hw_died:
-		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 		spin_unlock(&xhci->lock);
 		return -ESHUTDOWN;
 	}
@@ -2187,8 +2287,12 @@ hw_died:
 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
 {
 	irqreturn_t ret;
+	struct xhci_hcd *xhci;
 
+	xhci = hcd_to_xhci(hcd);
 	set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+	if (xhci->shared_hcd)
+		set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags);
 
 	ret = xhci_irq(hcd);
 
@@ -2332,7 +2436,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 	INIT_LIST_HEAD(&td->cancelled_td_list);
 
 	if (td_index == 0) {
-		ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+		ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
 		if (unlikely(ret)) {
 			xhci_urb_free_priv(xhci, urb_priv);
 			urb->hcpriv = NULL;
@@ -3131,24 +3235,6 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 	return 0;
 }
 
-/* Queue a no-op command on the command ring */
-static int queue_cmd_noop(struct xhci_hcd *xhci)
-{
-	return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false);
-}
-
-/*
- * Place a no-op command on the command ring to test the command and
- * event ring.
- */
-void *xhci_setup_one_noop(struct xhci_hcd *xhci)
-{
-	if (queue_cmd_noop(xhci) < 0)
-		return NULL;
-	xhci->noops_submitted++;
-	return xhci_ring_cmd_db;
-}
-
 /* Queue a slot enable or disable request on the command ring */
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
 {
@@ -3229,6 +3315,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
 	u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
+	struct xhci_virt_ep *ep;
 
 	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
 	if (addr == 0) {
@@ -3237,6 +3324,14 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 				deq_seg, deq_ptr);
 		return 0;
 	}
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	if ((ep->ep_state & SET_DEQ_PENDING)) {
+		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
+		xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
+		return 0;
+	}
+	ep->queued_deq_seg = deq_seg;
+	ep->queued_deq_ptr = deq_ptr;
 	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
 			upper_32_bits(addr), trb_stream_id,
 			trb_slot_id | trb_ep_index | type, false);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2083fc2..9a3645f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -93,17 +93,20 @@ void xhci_quiesce(struct xhci_hcd *xhci)
  *
  * Disable any IRQs and clear the run/stop bit.
  * HC will complete any current and actively pipelined transactions, and
- * should halt within 16 microframes of the run/stop bit being cleared.
+ * should halt within 16 ms of the run/stop bit being cleared.
  * Read HC Halted bit in the status register to see when the HC is finished.
- * XXX: shouldn't we set HC_STATE_HALT here somewhere?
  */
 int xhci_halt(struct xhci_hcd *xhci)
 {
+	int ret;
 	xhci_dbg(xhci, "// Halt the HC\n");
 	xhci_quiesce(xhci);
 
-	return handshake(xhci, &xhci->op_regs->status,
+	ret = handshake(xhci, &xhci->op_regs->status,
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+	if (!ret)
+		xhci->xhc_state |= XHCI_STATE_HALTED;
+	return ret;
 }
 
 /*
@@ -130,11 +133,13 @@ static int xhci_start(struct xhci_hcd *xhci)
 		xhci_err(xhci, "Host took too long to start, "
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
+	if (!ret)
+		xhci->xhc_state &= ~XHCI_STATE_HALTED;
 	return ret;
 }
 
 /*
- * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ * Reset a halted HC.
  *
  * This resets pipelines, timers, counters, state machines, etc.
  * Transactions will be terminated immediately, and operational registers
@@ -156,8 +161,6 @@ int xhci_reset(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RESET;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	/* XXX: Why does EHCI set this here?  Shouldn't other code do this? */
-	xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 
 	ret = handshake(xhci, &xhci->op_regs->command,
 			CMD_RESET, 0, 250 * 1000);
@@ -350,7 +353,6 @@ static void xhci_event_ring_work(unsigned long arg)
 
 	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
 	xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
-	xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
 	xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
 	xhci->error_bitmask = 0;
 	xhci_dbg(xhci, "Event ring:\n");
@@ -370,10 +372,6 @@ static void xhci_event_ring_work(unsigned long arg)
 			xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]);
 		}
 	}
-
-	if (xhci->noops_submitted != NUM_TEST_NOOPS)
-		if (xhci_setup_one_noop(xhci))
-			xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	if (!xhci->zombie)
@@ -383,6 +381,21 @@ static void xhci_event_ring_work(unsigned long arg)
 }
 #endif
 
+static int xhci_run_finished(struct xhci_hcd *xhci)
+{
+	if (xhci_start(xhci)) {
+		xhci_halt(xhci);
+		return -ENODEV;
+	}
+	xhci->shared_hcd->state = HC_STATE_RUNNING;
+
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_ring_cmd_db(xhci);
+
+	xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n");
+	return 0;
+}
+
 /*
  * Start the HC after it was halted.
  *
@@ -402,9 +415,14 @@ int xhci_run(struct usb_hcd *hcd)
 	u32 ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-	void (*doorbell)(struct xhci_hcd *) = NULL;
+
+	/* Start the xHCI host controller running only after the USB 2.0 roothub
+	 * is setup.
+	 */
 
 	hcd->uses_new_polling = 1;
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return xhci_run_finished(xhci);
 
 	xhci_dbg(xhci, "xhci_run\n");
 	/* unregister the legacy interrupt */
@@ -461,7 +479,6 @@ int xhci_run(struct usb_hcd *hcd)
 	xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
 
 	/* Set the HCD state before we enable the irqs */
-	hcd->state = HC_STATE_RUNNING;
 	temp = xhci_readl(xhci, &xhci->op_regs->command);
 	temp |= (CMD_EIE);
 	xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
@@ -475,24 +492,27 @@ int xhci_run(struct usb_hcd *hcd)
 			&xhci->ir_set->irq_pending);
 	xhci_print_ir_set(xhci, 0);
 
-	if (NUM_TEST_NOOPS > 0)
-		doorbell = xhci_setup_one_noop(xhci);
 	if (xhci->quirks & XHCI_NEC_HOST)
 		xhci_queue_vendor_command(xhci, 0, 0, 0,
 				TRB_TYPE(TRB_NEC_GET_FW));
 
-	if (xhci_start(xhci)) {
-		xhci_halt(xhci);
-		return -ENODEV;
-	}
+	xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
+	return 0;
+}
 
-	if (doorbell)
-		(*doorbell)(xhci);
-	if (xhci->quirks & XHCI_NEC_HOST)
-		xhci_ring_cmd_db(xhci);
+static void xhci_only_stop_hcd(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	xhci_dbg(xhci, "Finished xhci_run\n");
-	return 0;
+	spin_lock_irq(&xhci->lock);
+	xhci_halt(xhci);
+
+	/* The shared_hcd is going to be deallocated shortly (the USB core only
+	 * calls this function when allocation fails in usb_add_hcd(), or
+	 * usb_remove_hcd() is called).  So we need to unset xHCI's pointer.
+	 */
+	xhci->shared_hcd = NULL;
+	spin_unlock_irq(&xhci->lock);
 }
 
 /*
@@ -509,7 +529,15 @@ void xhci_stop(struct usb_hcd *hcd)
 	u32 temp;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (!usb_hcd_is_primary_hcd(hcd)) {
+		xhci_only_stop_hcd(xhci->shared_hcd);
+		return;
+	}
+
 	spin_lock_irq(&xhci->lock);
+	/* Make sure the xHC is halted for a USB3 roothub
+	 * (xhci_stop() could be called as part of failed init).
+	 */
 	xhci_halt(xhci);
 	xhci_reset(xhci);
 	spin_unlock_irq(&xhci->lock);
@@ -542,6 +570,8 @@ void xhci_stop(struct usb_hcd *hcd)
  * This is called when the machine is rebooting or halting.  We assume that the
  * machine will be powered off, and the HC's internal state will be reset.
  * Don't bother to free memory.
+ *
+ * This will only ever be called with the main usb_hcd (the USB3 roothub).
  */
 void xhci_shutdown(struct usb_hcd *hcd)
 {
@@ -657,6 +687,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
 	/* step 1: stop endpoint */
 	/* skipped assuming that port suspend has done */
 
@@ -706,10 +737,15 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 {
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
-	int	old_state, retval;
+	struct usb_hcd		*secondary_hcd;
+	int			retval;
 
-	old_state = hcd->state;
-	if (time_before(jiffies, xhci->next_statechange))
+	/* Wait a bit if either of the roothubs need to settle from the
+	 * transistion into bus suspend.
+	 */
+	if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
+			time_before(jiffies,
+				xhci->bus_state[1].next_statechange))
 		msleep(100);
 
 	spin_lock_irq(&xhci->lock);
@@ -762,16 +798,34 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
 			    xhci_readl(xhci, &xhci->op_regs->status));
 
-		xhci_dbg(xhci, "Initialize the HCD\n");
-		retval = xhci_init(hcd);
+		/* USB core calls the PCI reinit and start functions twice:
+		 * first with the primary HCD, and then with the secondary HCD.
+		 * If we don't do the same, the host will never be started.
+		 */
+		if (!usb_hcd_is_primary_hcd(hcd))
+			secondary_hcd = hcd;
+		else
+			secondary_hcd = xhci->shared_hcd;
+
+		xhci_dbg(xhci, "Initialize the xhci_hcd\n");
+		retval = xhci_init(hcd->primary_hcd);
 		if (retval)
 			return retval;
+		xhci_dbg(xhci, "Start the primary HCD\n");
+		retval = xhci_run(hcd->primary_hcd);
+		if (retval)
+			goto failed_restart;
 
-		xhci_dbg(xhci, "Start the HCD\n");
-		retval = xhci_run(hcd);
-		if (!retval)
+		xhci_dbg(xhci, "Start the secondary HCD\n");
+		retval = xhci_run(secondary_hcd);
+		if (!retval) {
 			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+			set_bit(HCD_FLAG_HW_ACCESSIBLE,
+					&xhci->shared_hcd->flags);
+		}
+failed_restart:
 		hcd->state = HC_STATE_SUSPENDED;
+		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
 		return retval;
 	}
 
@@ -792,10 +846,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 */
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	if (!hibernated)
-		hcd->state = old_state;
-	else
-		hcd->state = HC_STATE_SUSPENDED;
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
 
 	spin_unlock_irq(&xhci->lock);
 	return 0;
@@ -1167,13 +1218,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	if (ret || !urb->hcpriv)
 		goto done;
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
-	if (temp == 0xffffffff) {
+	if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
 		xhci_dbg(xhci, "HW died, freeing TD.\n");
 		urb_priv = urb->hcpriv;
 
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
+		usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
 		xhci_urb_free_priv(xhci, urb_priv);
 		return ret;
 	}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7f127df..711de25 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -644,6 +644,9 @@ struct xhci_ep_ctx {
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
 
+/* deq bitmasks */
+#define EP_CTX_CYCLE_MASK		(1 << 0)
+
 
 /**
  * struct xhci_input_control_context
@@ -746,6 +749,12 @@ struct xhci_virt_ep {
 	struct timer_list	stop_cmd_timer;
 	int			stop_cmds_pending;
 	struct xhci_hcd		*xhci;
+	/* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
+	 * command.  We'll need to update the ring's dequeue segment and dequeue
+	 * pointer after the command completes.
+	 */
+	struct xhci_segment	*queued_deq_seg;
+	union xhci_trb		*queued_deq_ptr;
 	/*
 	 * Sometimes the xHC can not process isochronous endpoint ring quickly
 	 * enough, and it will miss some isoc tds on the ring and generate
@@ -1161,8 +1170,29 @@ struct s3_save {
 	u64	erst_dequeue;
 };
 
+struct xhci_bus_state {
+	unsigned long		bus_suspended;
+	unsigned long		next_statechange;
+
+	/* Port suspend arrays are indexed by the portnum of the fake roothub */
+	/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
+	u32			port_c_suspend;
+	u32			suspended_ports;
+	unsigned long		resume_done[USB_MAXCHILDREN];
+};
+
+static inline unsigned int hcd_index(struct usb_hcd *hcd)
+{
+	if (hcd->speed == HCD_USB3)
+		return 0;
+	else
+		return 1;
+}
+
 /* There is one ehci_hci structure per controller */
 struct xhci_hcd {
+	struct usb_hcd *main_hcd;
+	struct usb_hcd *shared_hcd;
 	/* glue to PCI and HCD framework */
 	struct xhci_cap_regs __iomem *cap_regs;
 	struct xhci_op_regs __iomem *op_regs;
@@ -1224,9 +1254,6 @@ struct xhci_hcd {
 	/* Host controller watchdog timer structures */
 	unsigned int		xhc_state;
 
-	unsigned long		bus_suspended;
-	unsigned long		next_statechange;
-
 	u32			command;
 	struct s3_save		s3;
 /* Host controller is dying - not responding to commands. "I'm not dead yet!"
@@ -1242,18 +1269,15 @@ struct xhci_hcd {
  * There are no reports of xHCI host controllers that display this issue.
  */
 #define XHCI_STATE_DYING	(1 << 0)
+#define XHCI_STATE_HALTED	(1 << 1)
 	/* Statistics */
-	int			noops_submitted;
-	int			noops_handled;
 	int			error_bitmask;
 	unsigned int		quirks;
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
 #define XHCI_NEC_HOST		(1 << 2)
-	u32			port_c_suspend[8];	/* port suspend change*/
-	u32			suspended_ports[8];	/* which ports are
-							   suspended */
-	unsigned long		resume_done[MAX_HC_PORTS];
+	/* There are two roothubs to keep track of bus suspend info for */
+	struct xhci_bus_state   bus_state[2];
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
 	u8			*port_array;
 	/* Array of pointers to USB 3.0 PORTSC registers */
@@ -1264,18 +1288,15 @@ struct xhci_hcd {
 	unsigned int		num_usb2_ports;
 };
 
-/* For testing purposes */
-#define NUM_TEST_NOOPS	0
-
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
 static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
 {
-	return (struct xhci_hcd *) (hcd->hcd_priv);
+	return *((struct xhci_hcd **) (hcd->hcd_priv));
 }
 
 static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
 {
-	return container_of((void *) xhci, struct usb_hcd, hcd_priv);
+	return xhci->main_hcd;
 }
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
@@ -1471,7 +1492,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 		dma_addr_t suspect_dma);
 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
-void *xhci_setup_one_noop(struct xhci_hcd *xhci);
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
@@ -1525,7 +1545,8 @@ int xhci_bus_resume(struct usb_hcd *hcd);
 #endif	/* CONFIG_PM */
 
 u32 xhci_port_state_to_neutral(u32 state);
-int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port);
+int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 port);
 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
 
 /* xHCI contexts */
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index a35b427..388cc12 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -83,6 +83,8 @@ static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test)
 #define WARNING(tdev, fmt, args...) \
 	dev_warn(&(tdev)->intf->dev , fmt , ## args)
 
+#define GUARD_BYTE	0xA5
+
 /*-------------------------------------------------------------------------*/
 
 static int
@@ -186,11 +188,12 @@ static void simple_callback(struct urb *urb)
 	complete(urb->context);
 }
 
-static struct urb *simple_alloc_urb(
+static struct urb *usbtest_alloc_urb(
 	struct usb_device	*udev,
 	int			pipe,
-	unsigned long		bytes
-)
+	unsigned long		bytes,
+	unsigned		transfer_flags,
+	unsigned		offset)
 {
 	struct urb		*urb;
 
@@ -201,19 +204,46 @@ static struct urb *simple_alloc_urb(
 	urb->interval = (udev->speed == USB_SPEED_HIGH)
 			? (INTERRUPT_RATE << 3)
 			: INTERRUPT_RATE;
-	urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+	urb->transfer_flags = transfer_flags;
 	if (usb_pipein(pipe))
 		urb->transfer_flags |= URB_SHORT_NOT_OK;
-	urb->transfer_buffer = usb_alloc_coherent(udev, bytes, GFP_KERNEL,
-			&urb->transfer_dma);
+
+	if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+		urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
+			GFP_KERNEL, &urb->transfer_dma);
+	else
+		urb->transfer_buffer = kmalloc(bytes + offset, GFP_KERNEL);
+
 	if (!urb->transfer_buffer) {
 		usb_free_urb(urb);
-		urb = NULL;
-	} else
-		memset(urb->transfer_buffer, 0, bytes);
+		return NULL;
+	}
+
+	/* To test unaligned transfers add an offset and fill the
+		unused memory with a guard value */
+	if (offset) {
+		memset(urb->transfer_buffer, GUARD_BYTE, offset);
+		urb->transfer_buffer += offset;
+		if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+			urb->transfer_dma += offset;
+	}
+
+	/* For inbound transfers use guard byte so that test fails if
+		data not correctly copied */
+	memset(urb->transfer_buffer,
+			usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
+			bytes);
 	return urb;
 }
 
+static struct urb *simple_alloc_urb(
+	struct usb_device	*udev,
+	int			pipe,
+	unsigned long		bytes)
+{
+	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0);
+}
+
 static unsigned pattern;
 static unsigned mod_pattern;
 module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR);
@@ -238,13 +268,38 @@ static inline void simple_fill_buf(struct urb *urb)
 	}
 }
 
-static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
+static inline unsigned buffer_offset(void *buf)
+{
+	return (unsigned)buf & (ARCH_KMALLOC_MINALIGN - 1);
+}
+
+static int check_guard_bytes(struct usbtest_dev *tdev, struct urb *urb)
+{
+	u8 *buf = urb->transfer_buffer;
+	u8 *guard = buf - buffer_offset(buf);
+	unsigned i;
+
+	for (i = 0; guard < buf; i++, guard++) {
+		if (*guard != GUARD_BYTE) {
+			ERROR(tdev, "guard byte[%d] %d (not %d)\n",
+				i, *guard, GUARD_BYTE);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
 {
 	unsigned	i;
 	u8		expected;
 	u8		*buf = urb->transfer_buffer;
 	unsigned	len = urb->actual_length;
 
+	int ret = check_guard_bytes(tdev, urb);
+	if (ret)
+		return ret;
+
 	for (i = 0; i < len; i++, buf++) {
 		switch (pattern) {
 		/* all-zeroes has no synchronization issues */
@@ -274,8 +329,16 @@ static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
 
 static void simple_free_urb(struct urb *urb)
 {
-	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
-			  urb->transfer_buffer, urb->transfer_dma);
+	unsigned offset = buffer_offset(urb->transfer_buffer);
+
+	if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+		usb_free_coherent(
+			urb->dev,
+			urb->transfer_buffer_length + offset,
+			urb->transfer_buffer - offset,
+			urb->transfer_dma - offset);
+	else
+		kfree(urb->transfer_buffer - offset);
 	usb_free_urb(urb);
 }
 
@@ -1256,7 +1319,7 @@ done:
  * try whatever we're told to try.
  */
 static int ctrl_out(struct usbtest_dev *dev,
-		unsigned count, unsigned length, unsigned vary)
+		unsigned count, unsigned length, unsigned vary, unsigned offset)
 {
 	unsigned		i, j, len;
 	int			retval;
@@ -1267,10 +1330,11 @@ static int ctrl_out(struct usbtest_dev *dev,
 	if (length < 1 || length > 0xffff || vary >= length)
 		return -EINVAL;
 
-	buf = kmalloc(length, GFP_KERNEL);
+	buf = kmalloc(length + offset, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
+	buf += offset;
 	udev = testdev_to_usbdev(dev);
 	len = length;
 	retval = 0;
@@ -1337,7 +1401,7 @@ static int ctrl_out(struct usbtest_dev *dev,
 		ERROR(dev, "ctrl_out %s failed, code %d, count %d\n",
 			what, retval, i);
 
-	kfree(buf);
+	kfree(buf - offset);
 	return retval;
 }
 
@@ -1373,6 +1437,8 @@ static void iso_callback(struct urb *urb)
 		ctx->errors += urb->number_of_packets;
 	else if (urb->actual_length != urb->transfer_buffer_length)
 		ctx->errors++;
+	else if (check_guard_bytes(ctx->dev, urb) != 0)
+		ctx->errors++;
 
 	if (urb->status == 0 && ctx->count > (ctx->pending - 1)
 			&& !ctx->submit_error) {
@@ -1408,7 +1474,8 @@ static struct urb *iso_alloc_urb(
 	struct usb_device	*udev,
 	int			pipe,
 	struct usb_endpoint_descriptor	*desc,
-	long			bytes
+	long			bytes,
+	unsigned offset
 )
 {
 	struct urb		*urb;
@@ -1428,13 +1495,24 @@ static struct urb *iso_alloc_urb(
 
 	urb->number_of_packets = packets;
 	urb->transfer_buffer_length = bytes;
-	urb->transfer_buffer = usb_alloc_coherent(udev, bytes, GFP_KERNEL,
-			&urb->transfer_dma);
+	urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset,
+							GFP_KERNEL,
+							&urb->transfer_dma);
 	if (!urb->transfer_buffer) {
 		usb_free_urb(urb);
 		return NULL;
 	}
-	memset(urb->transfer_buffer, 0, bytes);
+	if (offset) {
+		memset(urb->transfer_buffer, GUARD_BYTE, offset);
+		urb->transfer_buffer += offset;
+		urb->transfer_dma += offset;
+	}
+	/* For inbound transfers use guard byte so that test fails if
+		data not correctly copied */
+	memset(urb->transfer_buffer,
+			usb_pipein(urb->pipe) ? GUARD_BYTE : 0,
+			bytes);
+
 	for (i = 0; i < packets; i++) {
 		/* here, only the last packet will be short */
 		urb->iso_frame_desc[i].length = min((unsigned) bytes, maxp);
@@ -1452,7 +1530,7 @@ static struct urb *iso_alloc_urb(
 
 static int
 test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
-		int pipe, struct usb_endpoint_descriptor *desc)
+		int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
 {
 	struct iso_context	context;
 	struct usb_device	*udev;
@@ -1480,7 +1558,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
 
 	for (i = 0; i < param->sglen; i++) {
 		urbs[i] = iso_alloc_urb(udev, pipe, desc,
-				param->length);
+					param->length, offset);
 		if (!urbs[i]) {
 			status = -ENOMEM;
 			goto fail;
@@ -1542,6 +1620,26 @@ fail:
 	return status;
 }
 
+static int test_unaligned_bulk(
+	struct usbtest_dev *tdev,
+	int pipe,
+	unsigned length,
+	int iterations,
+	unsigned transfer_flags,
+	const char *label)
+{
+	int retval;
+	struct urb *urb = usbtest_alloc_urb(
+		testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1);
+
+	if (!urb)
+		return -ENOMEM;
+
+	retval = simple_io(tdev, urb, iterations, 0, 0, label);
+	simple_free_urb(urb);
+	return retval;
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* We only have this one interface to user space, through usbfs.
@@ -1843,7 +1941,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 				realworld ? 1 : 0, param->length,
 				param->vary);
 		retval = ctrl_out(dev, param->iterations,
-				param->length, param->vary);
+				param->length, param->vary, 0);
 		break;
 
 	/* iso write tests */
@@ -1856,7 +1954,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 				param->sglen, param->length);
 		/* FIRMWARE:  iso sink */
 		retval = test_iso_queue(dev, param,
-				dev->out_iso_pipe, dev->iso_out);
+				dev->out_iso_pipe, dev->iso_out, 0);
 		break;
 
 	/* iso read tests */
@@ -1869,13 +1967,103 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 				param->sglen, param->length);
 		/* FIRMWARE:  iso source */
 		retval = test_iso_queue(dev, param,
-				dev->in_iso_pipe, dev->iso_in);
+				dev->in_iso_pipe, dev->iso_in, 0);
 		break;
 
 	/* FIXME unlink from queue (ring with N urbs) */
 
 	/* FIXME scatterlist cancel (needs helper thread) */
 
+	/* Tests for bulk I/O using DMA mapping by core and odd address */
+	case 17:
+		if (dev->out_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 17:  write odd addr %d bytes %u times core map\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->out_pipe,
+				param->length, param->iterations,
+				0, "test17");
+		break;
+
+	case 18:
+		if (dev->in_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 18:  read odd addr %d bytes %u times core map\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->in_pipe,
+				param->length, param->iterations,
+				0, "test18");
+		break;
+
+	/* Tests for bulk I/O using premapped coherent buffer and odd address */
+	case 19:
+		if (dev->out_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 19:  write odd addr %d bytes %u times premapped\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->out_pipe,
+				param->length, param->iterations,
+				URB_NO_TRANSFER_DMA_MAP, "test19");
+		break;
+
+	case 20:
+		if (dev->in_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 20:  read odd addr %d bytes %u times premapped\n",
+			param->length, param->iterations);
+
+		retval = test_unaligned_bulk(
+				dev, dev->in_pipe,
+				param->length, param->iterations,
+				URB_NO_TRANSFER_DMA_MAP, "test20");
+		break;
+
+	/* control write tests with unaligned buffer */
+	case 21:
+		if (!dev->info->ctrl_out)
+			break;
+		dev_info(&intf->dev,
+				"TEST 21:  %d ep0out odd addr, %d..%d vary %d\n",
+				param->iterations,
+				realworld ? 1 : 0, param->length,
+				param->vary);
+		retval = ctrl_out(dev, param->iterations,
+				param->length, param->vary, 1);
+		break;
+
+	/* unaligned iso tests */
+	case 22:
+		if (dev->out_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 22:  write %d iso odd, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		retval = test_iso_queue(dev, param,
+				dev->out_iso_pipe, dev->iso_out, 1);
+		break;
+
+	case 23:
+		if (dev->in_iso_pipe == 0 || param->sglen == 0)
+			break;
+		dev_info(&intf->dev,
+			"TEST 23:  read %d iso odd, %d entries of %d bytes\n",
+				param->iterations,
+				param->sglen, param->length);
+		retval = test_iso_queue(dev, param,
+				dev->in_iso_pipe, dev->iso_in, 1);
+		break;
+
 	}
 	do_gettimeofday(&param->duration);
 	param->duration.tv_sec -= start.tv_sec;
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index a545d65..c302e19 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -236,6 +236,9 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
 			fp++;
 			dp++;
 		}
+		/* Wasteful, but simple to understand: ISO 'C' is sparse. */
+		if (ev_type == 'C')
+			ep->length = urb->transfer_buffer_length;
 	}
 
 	ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c292d5c..a914010 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1950,31 +1950,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		goto fail0;
 	}
 
-	switch (plat->mode) {
-	case MUSB_HOST:
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-		break;
-#else
-		goto bad_config;
-#endif
-	case MUSB_PERIPHERAL:
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		break;
-#else
-		goto bad_config;
-#endif
-	case MUSB_OTG:
-#ifdef CONFIG_USB_MUSB_OTG
-		break;
-#else
-bad_config:
-#endif
-	default:
-		dev_err(dev, "incompatible Kconfig role setting\n");
-		status = -EINVAL;
-		goto fail0;
-	}
-
 	/* allocate */
 	musb = allocate_instance(dev, plat->config, ctrl);
 	if (!musb) {
@@ -1982,6 +1957,10 @@ bad_config:
 		goto fail0;
 	}
 
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 200);
+	pm_runtime_enable(musb->controller);
+
 	spin_lock_init(&musb->lock);
 	musb->board_mode = plat->mode;
 	musb->board_set_power = plat->set_power;
@@ -2117,6 +2096,8 @@ bad_config:
 	if (status < 0)
 		goto fail3;
 
+	pm_runtime_put(musb->controller);
+
 	status = musb_init_debugfs(musb);
 	if (status < 0)
 		goto fail4;
@@ -2216,9 +2197,11 @@ static int __exit musb_remove(struct platform_device *pdev)
 	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
 	 *  - OTG mode: both roles are deactivated (or never-activated)
 	 */
+	pm_runtime_get_sync(musb->controller);
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
 
+	pm_runtime_put(musb->controller);
 	musb_free(musb);
 	iounmap(ctrl_base);
 	device_init_wakeup(&pdev->dev, 0);
@@ -2404,9 +2387,41 @@ static int musb_resume_noirq(struct device *dev)
 	return 0;
 }
 
+static int musb_runtime_suspend(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+
+	musb_save_context(musb);
+
+	return 0;
+}
+
+static int musb_runtime_resume(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	static int	first = 1;
+
+	/*
+	 * When pm_runtime_get_sync called for the first time in driver
+	 * init,  some of the structure is still not initialized which is
+	 * used in restore function. But clock needs to be
+	 * enabled before any register access, so
+	 * pm_runtime_get_sync has to be called.
+	 * Also context restore without save does not make
+	 * any sense
+	 */
+	if (!first)
+		musb_restore_context(musb);
+	first = 0;
+
+	return 0;
+}
+
 static const struct dev_pm_ops musb_dev_pm_ops = {
 	.suspend	= musb_suspend,
 	.resume_noirq	= musb_resume_noirq,
+	.runtime_suspend = musb_runtime_suspend,
+	.runtime_resume = musb_runtime_resume,
 };
 
 #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index e6400be..4f0dd2e 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -328,7 +328,7 @@ struct musb_hw_ep {
 #endif
 };
 
-static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
 {
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	return next_request(&hw_ep->ep_in);
@@ -337,7 +337,7 @@ static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
 #endif
 }
 
-static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
 {
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	return next_request(&hw_ep->ep_out);
@@ -358,10 +358,6 @@ struct musb_csr_regs {
 
 struct musb_context_registers {
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-	u32 otg_sysconfig, otg_forcestandby;
-#endif
 	u8 power;
 	u16 intrtxe, intrrxe;
 	u8 intrusbe;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 2fe3046..5c7b321 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -189,7 +189,7 @@ __acquires(ep->musb->lock)
 
 	req = to_musb_request(request);
 
-	list_del(&request->list);
+	list_del(&req->list);
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 	musb = req->musb;
@@ -251,9 +251,8 @@ static void nuke(struct musb_ep *ep, const int status)
 		ep->dma = NULL;
 	}
 
-	while (!list_empty(&(ep->req_list))) {
-		req = container_of(ep->req_list.next, struct musb_request,
-				request.list);
+	while (!list_empty(&ep->req_list)) {
+		req = list_first_entry(&ep->req_list, struct musb_request, list);
 		musb_g_giveback(ep, &req->request, status);
 	}
 }
@@ -485,6 +484,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 void musb_g_tx(struct musb *musb, u8 epnum)
 {
 	u16			csr;
+	struct musb_request	*req;
 	struct usb_request	*request;
 	u8 __iomem		*mbase = musb->mregs;
 	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
@@ -492,7 +492,8 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 	struct dma_channel	*dma;
 
 	musb_ep_select(mbase, epnum);
-	request = next_request(musb_ep);
+	req = next_request(musb_ep);
+	request = &req->request;
 
 	csr = musb_readw(epio, MUSB_TXCSR);
 	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
@@ -571,15 +572,15 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 
 		if (request->actual == request->length) {
 			musb_g_giveback(musb_ep, request, 0);
-			request = musb_ep->desc ? next_request(musb_ep) : NULL;
-			if (!request) {
+			req = musb_ep->desc ? next_request(musb_ep) : NULL;
+			if (!req) {
 				DBG(4, "%s idle now\n",
 					musb_ep->end_point.name);
 				return;
 			}
 		}
 
-		txstate(musb, to_musb_request(request));
+		txstate(musb, req);
 	}
 }
 
@@ -821,6 +822,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 void musb_g_rx(struct musb *musb, u8 epnum)
 {
 	u16			csr;
+	struct musb_request	*req;
 	struct usb_request	*request;
 	void __iomem		*mbase = musb->mregs;
 	struct musb_ep		*musb_ep;
@@ -835,10 +837,12 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 
 	musb_ep_select(mbase, epnum);
 
-	request = next_request(musb_ep);
-	if (!request)
+	req = next_request(musb_ep);
+	if (!req)
 		return;
 
+	request = &req->request;
+
 	csr = musb_readw(epio, MUSB_RXCSR);
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
 
@@ -914,15 +918,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 #endif
 		musb_g_giveback(musb_ep, request, 0);
 
-		request = next_request(musb_ep);
-		if (!request)
+		req = next_request(musb_ep);
+		if (!req)
 			return;
 	}
 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 exit:
 #endif
 	/* Analyze request */
-	rxstate(musb, to_musb_request(request));
+	rxstate(musb, req);
 }
 
 /* ------------------------------------------------------------ */
@@ -974,7 +978,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			ok = musb->hb_iso_rx;
 
 		if (!ok) {
-			DBG(4, "%s: not support ISO high bandwidth\n", __func__);
+			DBG(4, "no support for high bandwidth ISO\n");
 			goto fail;
 		}
 		musb_ep->hb_mult = (tmp >> 11) & 3;
@@ -998,7 +1002,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_tx) {
-			DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
+			DBG(4, "packet size beyond hardware FIFO size\n");
 			goto fail;
 		}
 
@@ -1038,7 +1042,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_rx) {
-			DBG(4, "%s: packet size beyond hw fifo size\n", __func__);
+			DBG(4, "packet size beyond hardware FIFO size\n");
 			goto fail;
 		}
 
@@ -1171,7 +1175,6 @@ struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 		return NULL;
 	}
 
-	INIT_LIST_HEAD(&request->request.list);
 	request->request.dma = DMA_ADDR_INVALID;
 	request->epnum = musb_ep->current_epnum;
 	request->ep = musb_ep;
@@ -1257,10 +1260,10 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	}
 
 	/* add request to the list */
-	list_add_tail(&(request->request.list), &(musb_ep->req_list));
+	list_add_tail(&request->list, &musb_ep->req_list);
 
 	/* it this is the head of the queue, start i/o ... */
-	if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+	if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
 		musb_ep_restart(musb, request);
 
 cleanup:
@@ -1271,7 +1274,8 @@ cleanup:
 static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 {
 	struct musb_ep		*musb_ep = to_musb_ep(ep);
-	struct usb_request	*r;
+	struct musb_request	*req = to_musb_request(request);
+	struct musb_request	*r;
 	unsigned long		flags;
 	int			status = 0;
 	struct musb		*musb = musb_ep->musb;
@@ -1282,10 +1286,10 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 	spin_lock_irqsave(&musb->lock, flags);
 
 	list_for_each_entry(r, &musb_ep->req_list, list) {
-		if (r == request)
+		if (r == req)
 			break;
 	}
-	if (r != request) {
+	if (r != req) {
 		DBG(3, "request %p not queued to %s\n", request, ep->name);
 		status = -EINVAL;
 		goto done;
@@ -1349,7 +1353,7 @@ static int musb_gadget_set_halt(struct usb_ep *ep, int value)
 
 	musb_ep_select(mbase, epnum);
 
-	request = to_musb_request(next_request(musb_ep));
+	request = next_request(musb_ep);
 	if (value) {
 		if (request) {
 			DBG(3, "request in progress, cannot halt %s\n",
@@ -1801,90 +1805,105 @@ void musb_gadget_cleanup(struct musb *musb)
 int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
-	int retval;
-	unsigned long flags;
-	struct musb *musb = the_gadget;
+	struct musb		*musb = the_gadget;
+	unsigned long		flags;
+	int			retval = -EINVAL;
 
 	if (!driver
 			|| driver->speed != USB_SPEED_HIGH
 			|| !bind || !driver->setup)
-		return -EINVAL;
+		goto err0;
 
 	/* driver must be initialized to support peripheral mode */
 	if (!musb) {
-		DBG(1, "%s, no dev??\n", __func__);
-		return -ENODEV;
+		DBG(1, "no dev??\n");
+		retval = -ENODEV;
+		goto err0;
 	}
 
+	pm_runtime_get_sync(musb->controller);
+
 	DBG(3, "registering driver %s\n", driver->function);
-	spin_lock_irqsave(&musb->lock, flags);
 
 	if (musb->gadget_driver) {
 		DBG(1, "%s is already bound to %s\n",
 				musb_driver_name,
 				musb->gadget_driver->driver.name);
 		retval = -EBUSY;
-	} else {
-		musb->gadget_driver = driver;
-		musb->g.dev.driver = &driver->driver;
-		driver->driver.bus = NULL;
-		musb->softconnect = 1;
-		retval = 0;
+		goto err0;
 	}
 
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->gadget_driver = driver;
+	musb->g.dev.driver = &driver->driver;
+	driver->driver.bus = NULL;
+	musb->softconnect = 1;
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	if (retval == 0) {
-		retval = bind(&musb->g);
-		if (retval != 0) {
-			DBG(3, "bind to driver %s failed --> %d\n",
-					driver->driver.name, retval);
-			musb->gadget_driver = NULL;
-			musb->g.dev.driver = NULL;
-		}
+	retval = bind(&musb->g);
+	if (retval) {
+		DBG(3, "bind to driver %s failed --> %d\n",
+				driver->driver.name, retval);
+		goto err1;
+	}
 
-		spin_lock_irqsave(&musb->lock, flags);
+	spin_lock_irqsave(&musb->lock, flags);
 
-		otg_set_peripheral(musb->xceiv, &musb->g);
-		musb->xceiv->state = OTG_STATE_B_IDLE;
-		musb->is_active = 1;
+	otg_set_peripheral(musb->xceiv, &musb->g);
+	musb->xceiv->state = OTG_STATE_B_IDLE;
+	musb->is_active = 1;
 
-		/* FIXME this ignores the softconnect flag.  Drivers are
-		 * allowed hold the peripheral inactive until for example
-		 * userspace hooks up printer hardware or DSP codecs, so
-		 * hosts only see fully functional devices.
-		 */
+	/*
+	 * FIXME this ignores the softconnect flag.  Drivers are
+	 * allowed hold the peripheral inactive until for example
+	 * userspace hooks up printer hardware or DSP codecs, so
+	 * hosts only see fully functional devices.
+	 */
 
-		if (!is_otg_enabled(musb))
-			musb_start(musb);
+	if (!is_otg_enabled(musb))
+		musb_start(musb);
 
-		otg_set_peripheral(musb->xceiv, &musb->g);
+	otg_set_peripheral(musb->xceiv, &musb->g);
 
-		spin_unlock_irqrestore(&musb->lock, flags);
+	spin_unlock_irqrestore(&musb->lock, flags);
 
-		if (is_otg_enabled(musb)) {
-			struct usb_hcd	*hcd = musb_to_hcd(musb);
+	if (is_otg_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
-			DBG(3, "OTG startup...\n");
+		DBG(3, "OTG startup...\n");
 
-			/* REVISIT:  funcall to other code, which also
-			 * handles power budgeting ... this way also
-			 * ensures HdrcStart is indirectly called.
-			 */
-			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
-			if (retval < 0) {
-				DBG(1, "add_hcd failed, %d\n", retval);
-				spin_lock_irqsave(&musb->lock, flags);
-				otg_set_peripheral(musb->xceiv, NULL);
-				musb->gadget_driver = NULL;
-				musb->g.dev.driver = NULL;
-				spin_unlock_irqrestore(&musb->lock, flags);
-			} else {
-				hcd->self.uses_pio_for_control = 1;
-			}
+		/* REVISIT:  funcall to other code, which also
+		 * handles power budgeting ... this way also
+		 * ensures HdrcStart is indirectly called.
+		 */
+		retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+		if (retval < 0) {
+			DBG(1, "add_hcd failed, %d\n", retval);
+			goto err2;
+
+			if ((musb->xceiv->last_event == USB_EVENT_ID)
+						&& musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 1);
 		}
+
+		hcd->self.uses_pio_for_control = 1;
+
+		if (musb->xceiv->last_event == USB_EVENT_NONE)
+			pm_runtime_put(musb->controller);
+
 	}
 
+	return 0;
+
+err2:
+	if (!is_otg_enabled(musb))
+		musb_stop(musb);
+
+err1:
+	musb->gadget_driver = NULL;
+	musb->g.dev.driver = NULL;
+
+err0:
 	return retval;
 }
 EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -1939,14 +1958,20 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
  */
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {
-	unsigned long	flags;
-	int		retval = 0;
 	struct musb	*musb = the_gadget;
+	unsigned long	flags;
 
 	if (!driver || !driver->unbind || !musb)
 		return -EINVAL;
 
-	/* REVISIT always use otg_set_peripheral() here too;
+	if (!musb->gadget_driver)
+		return -EINVAL;
+
+	if (musb->xceiv->last_event == USB_EVENT_NONE)
+		pm_runtime_get_sync(musb->controller);
+
+	/*
+	 * REVISIT always use otg_set_peripheral() here too;
 	 * this needs to shut down the OTG engine.
 	 */
 
@@ -1956,29 +1981,26 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	musb_hnp_stop(musb);
 #endif
 
-	if (musb->gadget_driver == driver) {
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
 
-		(void) musb_gadget_vbus_draw(&musb->g, 0);
+	musb->xceiv->state = OTG_STATE_UNDEFINED;
+	stop_activity(musb, driver);
+	otg_set_peripheral(musb->xceiv, NULL);
 
-		musb->xceiv->state = OTG_STATE_UNDEFINED;
-		stop_activity(musb, driver);
-		otg_set_peripheral(musb->xceiv, NULL);
+	DBG(3, "unregistering driver %s\n", driver->function);
 
-		DBG(3, "unregistering driver %s\n", driver->function);
-		spin_unlock_irqrestore(&musb->lock, flags);
-		driver->unbind(&musb->g);
-		spin_lock_irqsave(&musb->lock, flags);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	driver->unbind(&musb->g);
+	spin_lock_irqsave(&musb->lock, flags);
 
-		musb->gadget_driver = NULL;
-		musb->g.dev.driver = NULL;
+	musb->gadget_driver = NULL;
+	musb->g.dev.driver = NULL;
 
-		musb->is_active = 0;
-		musb_platform_try_idle(musb, 0);
-	} else
-		retval = -EINVAL;
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	if (is_otg_enabled(musb) && retval == 0) {
+	if (is_otg_enabled(musb)) {
 		usb_remove_hcd(musb_to_hcd(musb));
 		/* FIXME we need to be able to register another
 		 * gadget driver here and have everything work;
@@ -1986,7 +2008,12 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 		 */
 	}
 
-	return retval;
+	if (!is_otg_enabled(musb))
+		musb_stop(musb);
+
+	pm_runtime_put(musb->controller);
+
+	return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index a55354f..66b7c5e 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -35,6 +35,8 @@
 #ifndef __MUSB_GADGET_H
 #define __MUSB_GADGET_H
 
+#include <linux/list.h>
+
 enum buffer_map_state {
 	UN_MAPPED = 0,
 	PRE_MAPPED,
@@ -43,6 +45,7 @@ enum buffer_map_state {
 
 struct musb_request {
 	struct usb_request	request;
+	struct list_head	list;
 	struct musb_ep		*ep;
 	struct musb		*musb;
 	u8 tx;			/* endpoint direction */
@@ -94,13 +97,13 @@ static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
 	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
 }
 
-static inline struct usb_request *next_request(struct musb_ep *ep)
+static inline struct musb_request *next_request(struct musb_ep *ep)
 {
 	struct list_head	*queue = &ep->req_list;
 
 	if (list_empty(queue))
 		return NULL;
-	return container_of(queue->next, struct usb_request, list);
+	return container_of(queue->next, struct musb_request, list);
 }
 
 extern void musb_g_tx(struct musb *musb, u8 epnum);
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 6dd03f4..75a542e 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -304,8 +304,7 @@ __acquires(musb->lock)
 				}
 
 				/* Maybe start the first request in the queue */
-				request = to_musb_request(
-						next_request(musb_ep));
+				request = next_request(musb_ep);
 				if (!musb_ep->busy && request) {
 					DBG(3, "restarting the request\n");
 					musb_ep_restart(musb, request);
@@ -491,10 +490,12 @@ stall:
 static void ep0_rxstate(struct musb *musb)
 {
 	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*request;
 	struct usb_request	*req;
 	u16			count, csr;
 
-	req = next_ep0_request(musb);
+	request = next_ep0_request(musb);
+	req = &request->request;
 
 	/* read packet and ack; or stall because of gadget driver bug:
 	 * should have provided the rx buffer before setup() returned.
@@ -544,17 +545,20 @@ static void ep0_rxstate(struct musb *musb)
 static void ep0_txstate(struct musb *musb)
 {
 	void __iomem		*regs = musb->control_ep->regs;
-	struct usb_request	*request = next_ep0_request(musb);
+	struct musb_request	*req = next_ep0_request(musb);
+	struct usb_request	*request;
 	u16			csr = MUSB_CSR0_TXPKTRDY;
 	u8			*fifo_src;
 	u8			fifo_count;
 
-	if (!request) {
+	if (!req) {
 		/* WARN_ON(1); */
 		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
 		return;
 	}
 
+	request = &req->request;
+
 	/* load the data */
 	fifo_src = (u8 *) request->buf + request->actual;
 	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
@@ -598,7 +602,7 @@ static void ep0_txstate(struct musb *musb)
 static void
 musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
 {
-	struct usb_request	*r;
+	struct musb_request	*r;
 	void __iomem		*regs = musb->control_ep->regs;
 
 	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
@@ -616,7 +620,7 @@ musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
 	/* clean up any leftover transfers */
 	r = next_ep0_request(musb);
 	if (r)
-		musb_g_ep0_giveback(musb, r);
+		musb_g_ep0_giveback(musb, &r->request);
 
 	/* For zero-data requests we want to delay the STATUS stage to
 	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
@@ -758,11 +762,11 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 	case MUSB_EP0_STAGE_STATUSOUT:
 		/* end of sequence #1: write to host (TX state) */
 		{
-			struct usb_request	*req;
+			struct musb_request	*req;
 
 			req = next_ep0_request(musb);
 			if (req)
-				musb_g_ep0_giveback(musb, req);
+				musb_g_ep0_giveback(musb, &req->request);
 		}
 
 		/*
@@ -961,7 +965,7 @@ musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
 	}
 
 	/* add request to the list */
-	list_add_tail(&(req->request.list), &(ep->req_list));
+	list_add_tail(&req->list, &ep->req_list);
 
 	DBG(3, "queue to %s (%s), length=%d\n",
 			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 0f523d7..5eef4a8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1335,7 +1335,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	if (length > qh->maxpacket)
 		length = qh->maxpacket;
 	/* Unmap the buffer so that CPU can use it */
-	unmap_urb_for_dma(musb_to_hcd(musb), urb);
+	usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
 	musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
 	qh->segsize = length;
 
@@ -1757,7 +1757,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 		if (!dma) {
 			/* Unmap the buffer so that CPU can use it */
-			unmap_urb_for_dma(musb_to_hcd(musb), urb);
+			usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
 			done = musb_host_packet_rx(musb, urb,
 					epnum, iso_err);
 			DBG(6, "read %spacket\n", done ? "last " : "");
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index b46d187..489104a 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -305,8 +305,8 @@ int musb_hub_control(
 		desc->bHubContrCurrent = 0;
 
 		/* workaround bogus struct definition */
-		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
-		desc->DeviceRemovable[1] = 0xff;
+		desc->u.hs.DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->u.hs.DeviceRemovable[1] = 0xff;
 		}
 		break;
 	case GetHubStatus:
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index bc8badd..25cb8b0 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -33,6 +33,8 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
@@ -40,7 +42,6 @@
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
-	struct clk		*clk;
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
@@ -216,20 +217,12 @@ static inline void omap2430_low_level_exit(struct musb *musb)
 	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 	l |= ENABLEFORCE;	/* enable MSTANDBY */
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
-
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l |= ENABLEWAKEUP;	/* enable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 }
 
 static inline void omap2430_low_level_init(struct musb *musb)
 {
 	u32 l;
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
-
 	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
@@ -251,31 +244,39 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		if (is_otg_enabled(musb)) {
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 			if (musb->gadget_driver) {
+				pm_runtime_get_sync(musb->controller);
 				otg_init(musb->xceiv);
-
-				if (data->interface_type ==
-						MUSB_INTERFACE_UTMI)
-					omap2430_musb_set_vbus(musb, 1);
-
+				omap2430_musb_set_vbus(musb, 1);
 			}
 #endif
 		} else {
+			pm_runtime_get_sync(musb->controller);
 			otg_init(musb->xceiv);
-			if (data->interface_type ==
-					MUSB_INTERFACE_UTMI)
-				omap2430_musb_set_vbus(musb, 1);
+			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
 
 	case USB_EVENT_VBUS:
 		DBG(4, "VBUS Connect\n");
 
+		if (musb->gadget_driver)
+			pm_runtime_get_sync(musb->controller);
+
 		otg_init(musb->xceiv);
 		break;
 
 	case USB_EVENT_NONE:
 		DBG(4, "VBUS Disconnect\n");
 
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_otg_enabled(musb))
+			if (musb->gadget_driver)
+#endif
+			{
+				pm_runtime_mark_last_busy(musb->controller);
+				pm_runtime_put_autosuspend(musb->controller);
+			}
+
 		if (data->interface_type == MUSB_INTERFACE_UTMI) {
 			if (musb->xceiv->set_vbus)
 				otg_set_vbus(musb->xceiv, 0);
@@ -307,22 +308,11 @@ static int omap2430_musb_init(struct musb *musb)
 		return -ENODEV;
 	}
 
-	omap2430_low_level_init(musb);
-
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	l &= ~NOSTDBY;		/* remove possible nostdby */
-	l |= SMARTSTDBY;	/* enable smart standby */
-	l &= ~AUTOIDLE;		/* disable auto idle */
-	l &= ~NOIDLE;		/* remove possible noidle */
-	l |= SMARTIDLE;		/* enable smart idle */
-	/*
-	 * MUSB AUTOIDLE don't work in 3430.
-	 * Workaround by Richard Woodruff/TI
-	 */
-	if (!cpu_is_omap3430())
-		l |= AUTOIDLE;		/* enable auto idle */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+	status = pm_runtime_get_sync(dev);
+	if (status < 0) {
+		dev_err(dev, "pm_runtime_get_sync FAILED");
+		goto err1;
+	}
 
 	l = musb_readl(musb->mregs, OTG_INTERFSEL);
 
@@ -350,14 +340,58 @@ static int omap2430_musb_init(struct musb *musb)
 	if (status)
 		DBG(1, "notification register failed\n");
 
-	/* check whether cable is already connected */
-	if (musb->xceiv->state ==OTG_STATE_B_IDLE)
-		musb_otg_notifications(&musb->nb, 1,
-					musb->xceiv->gadget);
-
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
 	return 0;
+
+err1:
+	pm_runtime_disable(dev);
+	return status;
+}
+
+static void omap2430_musb_enable(struct musb *musb)
+{
+	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+
+	switch (musb->xceiv->last_event) {
+
+	case USB_EVENT_ID:
+		otg_init(musb->xceiv);
+		if (data->interface_type == MUSB_INTERFACE_UTMI) {
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) &
+						MUSB_DEVCTL_BDEVICE) {
+				cpu_relax();
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					break;
+				}
+			}
+		}
+		break;
+
+	case USB_EVENT_VBUS:
+		otg_init(musb->xceiv);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void omap2430_musb_disable(struct musb *musb)
+{
+	if (musb->xceiv->last_event)
+		otg_shutdown(musb->xceiv);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
@@ -378,6 +412,9 @@ static const struct musb_platform_ops omap2430_ops = {
 	.try_idle	= omap2430_musb_try_idle,
 
 	.set_vbus	= omap2430_musb_set_vbus,
+
+	.enable		= omap2430_musb_enable,
+	.disable	= omap2430_musb_disable,
 };
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
@@ -387,8 +424,6 @@ static int __init omap2430_probe(struct platform_device *pdev)
 	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
 	struct platform_device		*musb;
 	struct omap2430_glue		*glue;
-	struct clk			*clk;
-
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -403,26 +438,12 @@ static int __init omap2430_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	clk = clk_get(&pdev->dev, "ick");
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get clock\n");
-		ret = PTR_ERR(clk);
-		goto err2;
-	}
-
-	ret = clk_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err3;
-	}
-
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &omap2430_dmamask;
 	musb->dev.coherent_dma_mask	= omap2430_dmamask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
-	glue->clk			= clk;
 
 	pdata->platform_ops		= &omap2430_ops;
 
@@ -432,28 +453,24 @@ static int __init omap2430_probe(struct platform_device *pdev)
 			pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err4;
+		goto err2;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err4;
+		goto err2;
 	}
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err4;
+		goto err2;
 	}
 
-	return 0;
-
-err4:
-	clk_disable(clk);
+	pm_runtime_enable(&pdev->dev);
 
-err3:
-	clk_put(clk);
+	return 0;
 
 err2:
 	platform_device_put(musb);
@@ -471,61 +488,40 @@ static int __exit omap2430_remove(struct platform_device *pdev)
 
 	platform_device_del(glue->musb);
 	platform_device_put(glue->musb);
-	clk_disable(glue->clk);
-	clk_put(glue->clk);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	kfree(glue);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static void omap2430_save_context(struct musb *musb)
-{
-	musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
-}
 
-static void omap2430_restore_context(struct musb *musb)
-{
-	musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
-	musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
-}
-
-static int omap2430_suspend(struct device *dev)
+static int omap2430_runtime_suspend(struct device *dev)
 {
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
 
 	omap2430_low_level_exit(musb);
 	otg_set_suspend(musb->xceiv, 1);
-	omap2430_save_context(musb);
-	clk_disable(glue->clk);
 
 	return 0;
 }
 
-static int omap2430_resume(struct device *dev)
+static int omap2430_runtime_resume(struct device *dev)
 {
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
-	int				ret;
-
-	ret = clk_enable(glue->clk);
-	if (ret) {
-		dev_err(dev, "faled to enable clock\n");
-		return ret;
-	}
 
 	omap2430_low_level_init(musb);
-	omap2430_restore_context(musb);
 	otg_set_suspend(musb->xceiv, 0);
 
 	return 0;
 }
 
 static struct dev_pm_ops omap2430_pm_ops = {
-	.suspend	= omap2430_suspend,
-	.resume		= omap2430_resume,
+	.runtime_suspend = omap2430_runtime_suspend,
+	.runtime_resume = omap2430_runtime_resume,
 };
 
 #define DEV_PM_OPS	(&omap2430_pm_ops)
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index c061a88..99cb541 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -680,7 +680,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 
 	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
 	if (!tusb_dma)
-		goto cleanup;
+		goto out;
 
 	tusb_dma->musb = musb;
 	tusb_dma->tbase = musb->ctrl_base;
@@ -721,6 +721,6 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 
 cleanup:
 	dma_controller_destroy(&tusb_dma->controller);
-
+out:
 	return NULL;
 }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9ffc823..daf3e5f 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -49,6 +49,13 @@ config USB_ULPI
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
 
+config USB_ULPI_VIEWPORT
+	bool
+	depends on USB_ULPI
+	help
+	  Provides read/write operations to the ULPI phy register set for
+	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030
@@ -93,7 +100,7 @@ config USB_LANGWELL_OTG
 	  To compile this driver as a module, choose M here: the
 	  module will be called langwell_otg.
 
-config USB_MSM_OTG_72K
+config USB_MSM_OTG
 	tristate "OTG support for Qualcomm on-chip USB controller"
 	depends on (USB || USB_GADGET) && ARCH_MSM
 	select USB_OTG_UTILS
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index a520e71..e22d917 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
-obj-$(CONFIG_USB_MSM_OTG_72K)	+= msm72k_otg.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
+obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
index d14736b..07ccea9 100644
--- a/drivers/usb/otg/ab8500-usb.c
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -212,7 +212,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
 		break;
 	}
 
-	blocking_notifier_call_chain(&ab->otg.notifier, event, v);
+	atomic_notifier_call_chain(&ab->otg.notifier, event, v);
 
 	return 0;
 }
@@ -281,7 +281,7 @@ static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
 	ab->vbus_draw = mA;
 
 	if (mA)
-		blocking_notifier_call_chain(&ab->otg.notifier,
+		atomic_notifier_call_chain(&ab->otg.notifier,
 				USB_EVENT_ENUMERATED, ab->otg.gadget);
 	return 0;
 }
@@ -500,7 +500,7 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ab);
 
-	BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
+	ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
 
 	/* v1: Wait for link status to become stable.
 	 * all: Updates form set_host and set_peripheral as they are atomic.
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 9fea482..7f9b8cd 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -174,50 +174,24 @@ static int langwell_otg_set_power(struct otg_transceiver *otg,
 	return 0;
 }
 
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+/* A-device drives vbus, controlled through IPC commands */
 static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
 {
 	struct langwell_otg		*lnw = the_transceiver;
-	u8 r;
+	u8				sub_id;
 
 	dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
 
-	/* FIXME: surely we should cache this on the first read. If not use
-	   readv to avoid two transactions */
-	if (intel_scu_ipc_ioread8(0x00, &r) < 0) {
-		dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
-		return -EBUSY;
-	}
-	if ((r & 0x03) != 0x02) {
-		dev_dbg(lnw->dev, "not NEC PMIC attached\n");
-		return -EBUSY;
-	}
-
-	if (intel_scu_ipc_ioread8(0x20, &r) < 0) {
-		dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
-		return -EBUSY;
-	}
-
-	if ((r & 0x20) == 0) {
-		dev_dbg(lnw->dev, "no battery attached\n");
-		return -EBUSY;
-	}
+	if (enabled)
+		sub_id = 0x8; /* Turn on the VBus */
+	else
+		sub_id = 0x9; /* Turn off the VBus */
 
-	/* Workaround for battery attachment issue */
-	if (r == 0x34) {
-		dev_dbg(lnw->dev, "no battery attached on SH\n");
+	if (intel_scu_ipc_simple_command(0xef, sub_id)) {
+		dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
 		return -EBUSY;
 	}
 
-	dev_dbg(lnw->dev, "battery attached. 2 reg = %x\n", r);
-
-	/* workaround: FW detect writing 0x20/0xc0 to d4 event.
-	 * this is only for NEC PMIC.
-	 */
-
-	if (intel_scu_ipc_iowrite8(0xD4, enabled ? 0x20 : 0xC0))
-		dev_dbg(lnw->dev, "Failed to write PMIC.\n");
-
 	dev_dbg(lnw->dev, "%s --->\n", __func__);
 
 	return 0;
@@ -394,14 +368,14 @@ static void langwell_otg_phy_low_power(int on)
 	dev_dbg(lnw->dev, "%s <--- done\n", __func__);
 }
 
-/* After drv vbus, add 2 ms delay to set PHCD */
+/* After drv vbus, add 5 ms delay to set PHCD */
 static void langwell_otg_phy_low_power_wait(int on)
 {
 	struct langwell_otg	*lnw = the_transceiver;
 
-	dev_dbg(lnw->dev, "add 2ms delay before programing PHCD\n");
+	dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
 
-	mdelay(2);
+	mdelay(5);
 	langwell_otg_phy_low_power(on);
 }
 
diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm_otg.c
index 1cd52ed..2965986 100644
--- a/drivers/usb/otg/msm72k_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -253,6 +253,9 @@ static int msm_otg_reset(struct otg_transceiver *otg)
 }
 
 #define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
+#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
+
+#ifdef CONFIG_PM_SLEEP
 static int msm_otg_suspend(struct msm_otg *motg)
 {
 	struct otg_transceiver *otg = &motg->otg;
@@ -334,7 +337,6 @@ static int msm_otg_suspend(struct msm_otg *motg)
 	return 0;
 }
 
-#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
 static int msm_otg_resume(struct msm_otg *motg)
 {
 	struct otg_transceiver *otg = &motg->otg;
@@ -399,6 +401,7 @@ skip_phy_resume:
 
 	return 0;
 }
+#endif
 
 static void msm_otg_start_host(struct otg_transceiver *otg, int on)
 {
@@ -720,7 +723,8 @@ static int msm_otg_mode_open(struct inode *inode, struct file *file)
 static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
 				size_t count, loff_t *ppos)
 {
-	struct msm_otg *motg = file->private_data;
+	struct seq_file *s = file->private_data;
+	struct msm_otg *motg = s->private;
 	char buf[16];
 	struct otg_transceiver *otg = &motg->otg;
 	int status = count;
@@ -972,7 +976,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev)
 	msm_otg_debugfs_cleanup();
 	cancel_work_sync(&motg->sm_work);
 
-	msm_otg_resume(motg);
+	pm_runtime_resume(&pdev->dev);
 
 	device_init_wakeup(&pdev->dev, 0);
 	pm_runtime_disable(&pdev->dev);
@@ -1050,13 +1054,9 @@ static int msm_otg_runtime_resume(struct device *dev)
 	dev_dbg(dev, "OTG runtime resume\n");
 	return msm_otg_resume(motg);
 }
-#else
-#define msm_otg_runtime_idle	NULL
-#define msm_otg_runtime_suspend	NULL
-#define msm_otg_runtime_resume	NULL
 #endif
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int msm_otg_pm_suspend(struct device *dev)
 {
 	struct msm_otg *motg = dev_get_drvdata(dev);
@@ -1086,25 +1086,24 @@ static int msm_otg_pm_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define msm_otg_pm_suspend	NULL
-#define msm_otg_pm_resume	NULL
 #endif
 
+#ifdef CONFIG_PM
 static const struct dev_pm_ops msm_otg_dev_pm_ops = {
-	.runtime_suspend = msm_otg_runtime_suspend,
-	.runtime_resume  = msm_otg_runtime_resume,
-	.runtime_idle    = msm_otg_runtime_idle,
-	.suspend         = msm_otg_pm_suspend,
-	.resume          = msm_otg_pm_resume,
+	SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
+	SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
+				msm_otg_runtime_idle)
 };
+#endif
 
 static struct platform_driver msm_otg_driver = {
 	.remove = __devexit_p(msm_otg_remove),
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
 		.pm = &msm_otg_dev_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 8acf165..c1e3600 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -132,7 +132,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nop);
 
-	BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
+	ATOMIC_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
 
 	return 0;
 exit:
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 6ca505f..e01b073 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -275,6 +275,8 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
 			status, status, linkstat);
 
+	twl->otg.last_event = linkstat;
+
 	/* REVISIT this assumes host and peripheral controllers
 	 * are registered, and that both are active...
 	 */
@@ -512,7 +514,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		else
 			twl4030_phy_resume(twl);
 
-		blocking_notifier_call_chain(&twl->otg.notifier, status,
+		atomic_notifier_call_chain(&twl->otg.notifier, status,
 				twl->otg.gadget);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -534,7 +536,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
 			twl->asleep = 0;
 		}
 
-		blocking_notifier_call_chain(&twl->otg.notifier, status,
+		atomic_notifier_call_chain(&twl->otg.notifier, status,
 				twl->otg.gadget);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -623,7 +625,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+	ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 28f7701..8a91b4b 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -149,7 +149,6 @@ static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
 
 static int twl6030_phy_init(struct otg_transceiver *x)
 {
-	u8 hw_state;
 	struct twl6030_usb *twl;
 	struct device *dev;
 	struct twl4030_usb_data *pdata;
@@ -158,11 +157,7 @@ static int twl6030_phy_init(struct otg_transceiver *x)
 	dev  = twl->dev;
 	pdata = dev->platform_data;
 
-	regulator_enable(twl->usb3v3);
-
-	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
-
-	if (hw_state & STS_USB_ID)
+	if (twl->linkstat == USB_EVENT_ID)
 		pdata->phy_power(twl->dev, 1, 1);
 	else
 		pdata->phy_power(twl->dev, 0, 1);
@@ -180,7 +175,17 @@ static void twl6030_phy_shutdown(struct otg_transceiver *x)
 	dev  = twl->dev;
 	pdata = dev->platform_data;
 	pdata->phy_power(twl->dev, 0, 0);
-	regulator_disable(twl->usb3v3);
+}
+
+static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+	struct device *dev = twl->dev;
+	struct twl4030_usb_data *pdata = dev->platform_data;
+
+	pdata->phy_suspend(dev, suspend);
+
+	return 0;
 }
 
 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
@@ -199,16 +204,6 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
 	if (IS_ERR(twl->usb3v3))
 		return -ENODEV;
 
-	regulator_enable(twl->usb3v3);
-
-	/* Program the VUSB_CFG_TRANS for ACTIVE state. */
-	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
-						VUSB_CFG_TRANS);
-
-	/* Program the VUSB_CFG_STATE register to ON on all groups. */
-	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
-						VUSB_CFG_STATE);
-
 	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
 	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
 
@@ -261,16 +256,25 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 						CONTROLLER_STAT1);
 	if (!(hw_state & STS_USB_ID)) {
 		if (vbus_state & VBUS_DET) {
+			regulator_enable(twl->usb3v3);
+			twl->asleep = 1;
 			status = USB_EVENT_VBUS;
 			twl->otg.default_a = false;
 			twl->otg.state = OTG_STATE_B_IDLE;
+			twl->linkstat = status;
+			twl->otg.last_event = status;
+			atomic_notifier_call_chain(&twl->otg.notifier,
+						status, twl->otg.gadget);
 		} else {
 			status = USB_EVENT_NONE;
-		}
-		if (status >= 0) {
 			twl->linkstat = status;
-			blocking_notifier_call_chain(&twl->otg.notifier,
+			twl->otg.last_event = status;
+			atomic_notifier_call_chain(&twl->otg.notifier,
 						status, twl->otg.gadget);
+			if (twl->asleep) {
+				regulator_disable(twl->usb3v3);
+				twl->asleep = 0;
+			}
 		}
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -288,13 +292,17 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 
 	if (hw_state & STS_USB_ID) {
 
+		regulator_enable(twl->usb3v3);
+		twl->asleep = 1;
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
 								0x10);
 		status = USB_EVENT_ID;
 		twl->otg.default_a = true;
 		twl->otg.state = OTG_STATE_A_IDLE;
-		blocking_notifier_call_chain(&twl->otg.notifier, status,
+		twl->linkstat = status;
+		twl->otg.last_event = status;
+		atomic_notifier_call_chain(&twl->otg.notifier, status,
 							twl->otg.gadget);
 	} else  {
 		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
@@ -303,7 +311,6 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 								0x1);
 	}
 	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
-	twl->linkstat = status;
 
 	return IRQ_HANDLED;
 }
@@ -395,6 +402,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 	twl->otg.set_vbus	= twl6030_set_vbus;
 	twl->otg.init		= twl6030_phy_init;
 	twl->otg.shutdown	= twl6030_phy_shutdown;
+	twl->otg.set_suspend	= twl6030_phy_suspend;
 
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
@@ -411,7 +419,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+	ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
 
 	twl->irq_enabled = true;
 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
@@ -437,7 +445,9 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
+	twl->asleep = 0;
 	pdata->phy_init(dev);
+	twl6030_phy_suspend(&twl->otg, 0);
 	twl6030_enable_irq(&twl->otg);
 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 
diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/otg/ulpi_viewport.c
new file mode 100644
index 0000000..e9a37f9
--- /dev/null
+++ b/drivers/usb/otg/ulpi_viewport.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEW_WAKEUP	(1 << 31)
+#define ULPI_VIEW_RUN		(1 << 30)
+#define ULPI_VIEW_WRITE		(1 << 29)
+#define ULPI_VIEW_READ		(0 << 29)
+#define ULPI_VIEW_ADDR(x)	(((x) & 0xff) << 16)
+#define ULPI_VIEW_DATA_READ(x)	(((x) >> 8) & 0xff)
+#define ULPI_VIEW_DATA_WRITE(x)	((x) & 0xff)
+
+static int ulpi_viewport_wait(void __iomem *view, u32 mask)
+{
+	unsigned long usec = 2000;
+
+	while (usec--) {
+		if (!(readl(view) & mask))
+			return 0;
+
+		udelay(1);
+	};
+
+	return -ETIMEDOUT;
+}
+
+static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+	if (ret)
+		return ret;
+
+	writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+	if (ret)
+		return ret;
+
+	return ULPI_VIEW_DATA_READ(readl(view));
+}
+
+static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+	ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+	if (ret)
+		return ret;
+
+	writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) |
+						 ULPI_VIEW_ADDR(reg), view);
+
+	return ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+}
+
+struct otg_io_access_ops ulpi_viewport_access_ops = {
+	.read	= ulpi_viewport_read,
+	.write	= ulpi_viewport_write,
+};
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 7b8815d..14ac87e 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -75,6 +75,7 @@ static int debug;
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x1a86, 0x5523) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f349a36..a75f929 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -722,6 +722,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
@@ -973,7 +975,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
 	int divisor3;
 
 	/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
-	divisor3 = (base / 10 / baud) * 8;
+	divisor3 = base * 8 / (baud * 10);
 
 	divisor = divisor3 >> 3;
 	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 117e8e6..c543e55 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -730,6 +730,7 @@
 /* Olimex */
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_OCD_H_PID	0x002b
 
 /*
  * Telldus Technologies
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 3b246d9..76e3e50 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2343,7 +2343,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 				usb_get_serial_data(edge_port->port->serial);
 	int status = 0;
 	struct urb *urb;
-	int timeout;
 
 	usb_serial_debug_data(debug, &edge_port->port->dev,
 						__func__, length, buffer);
@@ -2376,8 +2375,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 		return status;
 	}
 
-	/* wait for command to finish */
-	timeout = COMMAND_TIMEOUT;
 #if 0
 	wait_event(&edge_port->wait_command, !edge_port->commandPending);
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 0791778..67f41b5 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2121,16 +2121,16 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	/* Work out which port within the device is being setup */
 	device_port = port->number - port->serial->minor;
 
-	dbg("%s - endpoint %d port %d (%d)",
-			__func__, usb_pipeendpoint(this_urb->pipe),
-			port->number, device_port);
-
-		/* Make sure we have an urb then send the message */
+	/* Make sure we have an urb then send the message */
 	if (this_urb == NULL) {
 		dbg("%s - oops no urb for port %d.", __func__, port->number);
 		return -1;
 	}
 
+	dbg("%s - endpoint %d port %d (%d)",
+			__func__, usb_pipeendpoint(this_urb->pipe),
+			port->number, device_port);
+
 	/* Save reset port val for resend.
 	   Don't overwrite resend for open/close condition. */
 	if ((reset_port + 1) > p_priv->resend_cont)
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 554a869..7b690f3 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -173,7 +173,8 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
 		container_of(work, struct keyspan_pda_private, wakeup_work);
 	struct usb_serial_port *port = priv->port;
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	tty_wakeup(tty);
+	if (tty)
+		tty_wakeup(tty);
 	tty_kref_put(tty);
 }
 
@@ -206,7 +207,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	int retval;
 	int status = urb->status;
@@ -223,7 +224,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
 		    __func__, status);
-		goto out;
+		return;
 	default:
 		dbg("%s - nonzero urb status received: %d",
 		    __func__, status);
@@ -233,12 +234,14 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 	/* see if the message is data or a status interrupt */
 	switch (data[0]) {
 	case 0:
-		/* rest of message is rx data */
-		if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
+		 /* rest of message is rx data */
+		if (tty && urb->actual_length) {
 			tty_insert_flip_string(tty, data + 1,
 						urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 		break;
 	case 1:
 		/* status interrupt */
@@ -265,8 +268,6 @@ exit:
 		dev_err(&port->dev,
 			"%s - usb_submit_urb failed with result %d",
 			__func__, retval);
-out:
-	tty_kref_put(tty);		     
 }
 
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index bd5bd85..b382d9a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -372,7 +372,7 @@ static void kobil_read_int_callback(struct urb *urb)
 	}
 
 	tty = tty_port_tty_get(&port->port);
-	if (urb->actual_length) {
+	if (tty && urb->actual_length) {
 
 		/* BEGIN DEBUG */
 		/*
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 2849f8c..1e225aa 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -78,6 +78,8 @@
 #include <asm/unaligned.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <linux/ioctl.h>
 #include "mct_u232.h"
 
 /*
@@ -104,6 +106,10 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
 static int  mct_u232_tiocmget(struct tty_struct *tty, struct file *file);
 static int  mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+static int  mct_u232_get_icount(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
 static void mct_u232_throttle(struct tty_struct *tty);
 static void mct_u232_unthrottle(struct tty_struct *tty);
 
@@ -150,9 +156,10 @@ static struct usb_serial_driver mct_u232_device = {
 	.tiocmset =	     mct_u232_tiocmset,
 	.attach =	     mct_u232_startup,
 	.release =	     mct_u232_release,
+	.ioctl =             mct_u232_ioctl,
+	.get_icount =        mct_u232_get_icount,
 };
 
-
 struct mct_u232_private {
 	spinlock_t lock;
 	unsigned int	     control_state; /* Modem Line Setting (TIOCM) */
@@ -160,6 +167,9 @@ struct mct_u232_private {
 	unsigned char	     last_lsr;      /* Line Status Register */
 	unsigned char	     last_msr;      /* Modem Status Register */
 	unsigned int	     rx_flags;      /* Throttling flags */
+	struct async_icount  icount;
+	wait_queue_head_t    msr_wait;	/* for handling sleeping while waiting
+						for msr change to happen */
 };
 
 #define THROTTLED		0x01
@@ -386,6 +396,20 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
 	return rc;
 } /* mct_u232_get_modem_stat */
 
+static void mct_u232_msr_to_icount(struct async_icount *icount,
+						unsigned char msr)
+{
+	/* Translate Control Line states */
+	if (msr & MCT_U232_MSR_DDSR)
+		icount->dsr++;
+	if (msr & MCT_U232_MSR_DCTS)
+		icount->cts++;
+	if (msr & MCT_U232_MSR_DRI)
+		icount->rng++;
+	if (msr & MCT_U232_MSR_DCD)
+		icount->dcd++;
+} /* mct_u232_msr_to_icount */
+
 static void mct_u232_msr_to_state(unsigned int *control_state,
 						unsigned char msr)
 {
@@ -422,6 +446,7 @@ static int mct_u232_startup(struct usb_serial *serial)
 	if (!priv)
 		return -ENOMEM;
 	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->msr_wait);
 	usb_set_serial_port_data(serial->port[0], priv);
 
 	init_waitqueue_head(&serial->port[0]->write_wait);
@@ -621,6 +646,8 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	/* Record Control Line states */
 	mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
 
+	mct_u232_msr_to_icount(&priv->icount, priv->last_msr);
+
 #if 0
 	/* Not yet handled. See belkin_sa.c for further information */
 	/* Now to report any errors */
@@ -647,6 +674,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		tty_kref_put(tty);
 	}
 #endif
+	wake_up_interruptible(&priv->msr_wait);
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -826,7 +854,6 @@ static void mct_u232_throttle(struct tty_struct *tty)
 	}
 }
 
-
 static void mct_u232_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -847,6 +874,82 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
+static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	DEFINE_WAIT(wait);
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
+	struct async_icount cnow, cprev;
+	unsigned long flags;
+
+	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+
+	switch (cmd) {
+
+	case TIOCMIWAIT:
+
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+
+		spin_lock_irqsave(&mct_u232_port->lock, flags);
+		cprev = mct_u232_port->icount;
+		spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+		for ( ; ; ) {
+			prepare_to_wait(&mct_u232_port->msr_wait,
+					&wait, TASK_INTERRUPTIBLE);
+			schedule();
+			finish_wait(&mct_u232_port->msr_wait, &wait);
+			/* see if a signal did it */
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			spin_lock_irqsave(&mct_u232_port->lock, flags);
+			cnow = mct_u232_port->icount;
+			spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+				return -EIO; /* no change => error */
+			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+				return 0;
+			}
+			cprev = cnow;
+		}
+
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int  mct_u232_get_icount(struct tty_struct *tty,
+			struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
+	struct async_icount *ic = &mct_u232_port->icount;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mct_u232_port->lock, flags);
+
+	icount->cts = ic->cts;
+	icount->dsr = ic->dsr;
+	icount->rng = ic->rng;
+	icount->dcd = ic->dcd;
+	icount->rx = ic->rx;
+	icount->tx = ic->tx;
+	icount->frame = ic->frame;
+	icount->overrun = ic->overrun;
+	icount->parity = ic->parity;
+	icount->brk = ic->brk;
+	icount->buf_overrun = ic->buf_overrun;
+
+	spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+
+	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+		__func__,  port->number, icount->rx, icount->tx);
+	return 0;
+}
+
 static int __init mct_u232_init(void)
 {
 	int retval;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7d3bc9a..ae506f4 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2052,7 +2052,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	struct usb_device *dev;
 	int i;
 	char data;
-	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	u16 product;
 	int ret_val;
 
 	dbg("%s: Entering ..........", __func__);
@@ -2062,6 +2062,7 @@ static int mos7720_startup(struct usb_serial *serial)
 		return -ENODEV;
 	}
 
+	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
 	/*
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index eda1f92..ce82396 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,6 +1,7 @@
 /*
  * Opticon USB barcode to serial driver
  *
+ * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com>
  * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (C) 2008 - 2009 Novell Inc.
  *
@@ -21,6 +22,16 @@
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
 
+#define CONTROL_RTS			0x02
+#define RESEND_CTS_STATE	0x03
+
+/* max number of write urbs in flight */
+#define URB_UPPER_LIMIT	8
+
+/* This driver works for the Opticon 1D barcode reader
+ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */
+#define DRIVER_DESC	"Opticon USB barcode to serial driver (1D)"
+
 static int debug;
 
 static const struct usb_device_id id_table[] = {
@@ -42,13 +53,13 @@ struct opticon_private {
 	bool throttled;
 	bool actually_throttled;
 	bool rts;
+	bool cts;
 	int outstanding_urbs;
 };
 
-/* max number of write urbs in flight */
-#define URB_UPPER_LIMIT	4
 
-static void opticon_bulk_callback(struct urb *urb)
+
+static void opticon_read_bulk_callback(struct urb *urb)
 {
 	struct opticon_private *priv = urb->context;
 	unsigned char *data = urb->transfer_buffer;
@@ -57,6 +68,7 @@ static void opticon_bulk_callback(struct urb *urb)
 	struct tty_struct *tty;
 	int result;
 	int data_length;
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -87,10 +99,10 @@ static void opticon_bulk_callback(struct urb *urb)
 		 * Data from the device comes with a 2 byte header:
 		 *
 		 * <0x00><0x00>data...
-		 * 	This is real data to be sent to the tty layer
+		 *	This is real data to be sent to the tty layer
 		 * <0x00><0x01)level
-		 * 	This is a RTS level change, the third byte is the RTS
-		 * 	value (0 for low, 1 for high).
+		 *	This is a CTS level change, the third byte is the CTS
+		 *	value (0 for low, 1 for high).
 		 */
 		if ((data[0] == 0x00) && (data[1] == 0x00)) {
 			/* real data, send it to the tty layer */
@@ -103,10 +115,13 @@ static void opticon_bulk_callback(struct urb *urb)
 			}
 		} else {
 			if ((data[0] == 0x00) && (data[1] == 0x01)) {
+				spin_lock_irqsave(&priv->lock, flags);
+				/* CTS status infomation package */
 				if (data[2] == 0x00)
-					priv->rts = false;
+					priv->cts = false;
 				else
-					priv->rts = true;
+					priv->cts = true;
+				spin_unlock_irqrestore(&priv->lock, flags);
 			} else {
 				dev_dbg(&priv->udev->dev,
 					"Unknown data packet received from the device:"
@@ -129,7 +144,7 @@ exit:
 				  usb_rcvbulkpipe(priv->udev,
 						  priv->bulk_address),
 				  priv->bulk_in_buffer, priv->buffer_size,
-				  opticon_bulk_callback, priv);
+				  opticon_read_bulk_callback, priv);
 		result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&port->dev,
@@ -140,6 +155,24 @@ exit:
 	spin_unlock(&priv->lock);
 }
 
+static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
+				u8 val)
+{
+	struct usb_serial *serial = port->serial;
+	int retval;
+	u8 buffer[2];
+
+	buffer[0] = val;
+	/* Send the message to the vendor control endpoint
+	 * of the connected device */
+	retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				requesttype,
+				USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+				0, 0, buffer, 1, 0);
+
+	return retval;
+}
+
 static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
@@ -152,19 +185,30 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->throttled = false;
 	priv->actually_throttled = false;
 	priv->port = port;
+	priv->rts = false;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* Start reading from the device */
+	/* Clear RTS line */
+	send_control_msg(port, CONTROL_RTS, 0);
+
+	/* Setup the read URB and start reading from the device */
 	usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
 			  usb_rcvbulkpipe(priv->udev,
 					  priv->bulk_address),
 			  priv->bulk_in_buffer, priv->buffer_size,
-			  opticon_bulk_callback, priv);
+			  opticon_read_bulk_callback, priv);
+
+	/* clear the halt status of the enpoint */
+	usb_clear_halt(priv->udev, priv->bulk_read_urb->pipe);
+
 	result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed resubmitting read urb, error %d\n",
 			__func__, result);
+	/* Request CTS line state, sometimes during opening the current
+	 * CTS state can be missed. */
+	send_control_msg(port, RESEND_CTS_STATE, 1);
 	return result;
 }
 
@@ -178,7 +222,7 @@ static void opticon_close(struct usb_serial_port *port)
 	usb_kill_urb(priv->bulk_read_urb);
 }
 
-static void opticon_write_bulk_callback(struct urb *urb)
+static void opticon_write_control_callback(struct urb *urb)
 {
 	struct opticon_private *priv = urb->context;
 	int status = urb->status;
@@ -210,6 +254,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned char *buffer;
 	unsigned long flags;
 	int status;
+	struct usb_ctrlrequest *dr;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -226,6 +271,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (!buffer) {
 		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
+
 		goto error_no_buffer;
 	}
 
@@ -240,35 +286,28 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
 
-	if (port->bulk_out_endpointAddress) {
-		usb_fill_bulk_urb(urb, serial->dev,
-				  usb_sndbulkpipe(serial->dev,
-						  port->bulk_out_endpointAddress),
-				  buffer, count, opticon_write_bulk_callback, priv);
-	} else {
-		struct usb_ctrlrequest *dr;
-
-		dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
-		if (!dr)
-			return -ENOMEM;
-
-		dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
-		dr->bRequest = 0x01;
-		dr->wValue = 0;
-		dr->wIndex = 0;
-		dr->wLength = cpu_to_le16(count);
-
-		usb_fill_control_urb(urb, serial->dev,
-			usb_sndctrlpipe(serial->dev, 0),
-			(unsigned char *)dr, buffer, count,
-			opticon_write_bulk_callback, priv);
-	}
+	/* The conncected devices do not have a bulk write endpoint,
+	 * to transmit data to de barcode device the control endpoint is used */
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	if (!dr)
+		return -ENOMEM;
+
+	dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
+	dr->bRequest = 0x01;
+	dr->wValue = 0;
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(count);
+
+	usb_fill_control_urb(urb, serial->dev,
+		usb_sndctrlpipe(serial->dev, 0),
+		(unsigned char *)dr, buffer, count,
+		opticon_write_control_callback, priv);
 
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		dev_err(&port->dev,
-		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+		"%s - usb_submit_urb(write endpoint) failed status = %d\n",
 							__func__, status);
 		count = status;
 		goto error;
@@ -360,16 +399,49 @@ static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
 	int result = 0;
 
 	dbg("%s - port %d", __func__, port->number);
+	if (!usb_get_intfdata(port->serial->interface))
+		return -ENODEV;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->rts)
-		result = TIOCM_RTS;
+		result |= TIOCM_RTS;
+	if (priv->cts)
+		result |= TIOCM_CTS;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - %x", __func__, result);
 	return result;
 }
 
+static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	bool rts;
+	bool changed = false;
+
+	if (!usb_get_intfdata(port->serial->interface))
+		return -ENODEV;
+	/* We only support RTS so we only handle that */
+	spin_lock_irqsave(&priv->lock, flags);
+
+	rts = priv->rts;
+	if (set & TIOCM_RTS)
+		priv->rts = true;
+	if (clear & TIOCM_RTS)
+		priv->rts = false;
+	changed = rts ^ priv->rts;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!changed)
+		return 0;
+
+	/* Send the new RTS state to the connected device */
+	return send_control_msg(port, CONTROL_RTS, !rts);
+}
+
 static int get_serial_info(struct opticon_private *priv,
 			   struct serial_struct __user *serial)
 {
@@ -431,6 +503,7 @@ static int opticon_startup(struct usb_serial *serial)
 	priv->serial = serial;
 	priv->port = serial->port[0];
 	priv->udev = serial->dev;
+	priv->outstanding_urbs = 0;	/* Init the outstanding urbs */
 
 	/* find our bulk endpoint */
 	intf = serial->interface->altsetting;
@@ -456,13 +529,6 @@ static int opticon_startup(struct usb_serial *serial)
 
 		priv->bulk_address = endpoint->bEndpointAddress;
 
-		/* set up our bulk urb */
-		usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
-				  usb_rcvbulkpipe(priv->udev,
-						  endpoint->bEndpointAddress),
-				  priv->bulk_in_buffer, priv->buffer_size,
-				  opticon_bulk_callback, priv);
-
 		bulk_in_found = true;
 		break;
 		}
@@ -558,6 +624,7 @@ static struct usb_serial_driver opticon_device = {
 	.unthrottle =		opticon_unthrottle,
 	.ioctl =		opticon_ioctl,
 	.tiocmget =		opticon_tiocmget,
+	.tiocmset =		opticon_tiocmset,
 };
 
 static int __init opticon_init(void)
@@ -581,6 +648,7 @@ static void __exit opticon_exit(void)
 
 module_init(opticon_init);
 module_exit(opticon_exit);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5f46838..75c7f45 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -652,7 +652,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 0457813..5b88b68 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -376,7 +376,10 @@ static int sierra_send_setup(struct usb_serial_port *port)
 	if (!do_send)
 		return 0;
 
-	usb_autopm_get_interface(serial->interface);
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval < 0)
+		return retval;
+
 	retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 		0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	usb_autopm_put_interface(serial->interface);
@@ -811,8 +814,12 @@ static void sierra_close(struct usb_serial_port *port)
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected) {
 			serial->interface->needs_remote_wakeup = 0;
-			usb_autopm_get_interface(serial->interface);
-			sierra_send_setup(port);
+			/* odd error handling due to pm counters */
+			if (!usb_autopm_get_interface(serial->interface))
+				sierra_send_setup(port);
+			else
+				usb_autopm_get_interface_no_resume(serial->interface);
+				
 		}
 		mutex_unlock(&serial->disc_mutex);
 		spin_lock_irq(&intfdata->susp_lock);
@@ -865,7 +872,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 		/* get rid of everything as in close */
 		sierra_close(port);
 		/* restore balance for autopm */
-		usb_autopm_put_interface(serial->interface);
+		if (!serial->disconnected)
+			usb_autopm_put_interface(serial->interface);
 		return err;
 	}
 	sierra_send_setup(port);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 546a521..2ff90a9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -911,9 +911,8 @@ int usb_serial_probe(struct usb_interface *interface,
 			dev_err(&interface->dev, "No free urbs available\n");
 			goto probe_error;
 		}
-		buffer_size = serial->type->bulk_in_size;
-		if (!buffer_size)
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		buffer_size = max_t(int, serial->type->bulk_in_size,
+				le16_to_cpu(endpoint->wMaxPacketSize));
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 9c014e2..eb95aec 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -261,7 +261,8 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 				intfdata->in_flight--;
 				spin_unlock_irqrestore(&intfdata->susp_lock,
 						       flags);
-				continue;
+				usb_autopm_put_interface_async(port->serial->interface);
+				break;
 			}
 		}
 
@@ -308,11 +309,16 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		/* Resubmit urb so we continue receiving */
 		if (status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err && err != -EPERM)
-				printk(KERN_ERR "%s: resubmit read urb failed. "
-				       "(%d)", __func__, err);
-			else
+			if (err) {
+				if (err != -EPERM) {
+					printk(KERN_ERR "%s: resubmit read urb failed. "
+						"(%d)", __func__, err);
+					/* busy also in error unless we are killed */
+					usb_mark_last_busy(port->serial->dev);
+				}
+			} else {
 				usb_mark_last_busy(port->serial->dev);
+			}
 		}
 
 	}
@@ -421,6 +427,7 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_lock_irq(&intfdata->susp_lock);
 	portdata->opened = 1;
 	spin_unlock_irq(&intfdata->susp_lock);
+	/* this balances a get in the generic USB serial code */
 	usb_autopm_put_interface(serial->interface);
 
 	return 0;
@@ -447,7 +454,8 @@ void usb_wwan_close(struct usb_serial_port *port)
 			usb_kill_urb(portdata->in_urbs[i]);
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
-		usb_autopm_get_interface(serial->interface);
+		/* balancing - important as an error cannot be handled*/
+		usb_autopm_get_interface_no_resume(serial->interface);
 		serial->interface->needs_remote_wakeup = 0;
 	}
 }
@@ -661,6 +669,18 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 }
 EXPORT_SYMBOL(usb_wwan_suspend);
 
+static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata)
+{
+	int i;
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		if (urb == portdata->out_urbs[i]) {
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
 static void play_delayed(struct usb_serial_port *port)
 {
 	struct usb_wwan_intf_private *data;
@@ -672,8 +692,17 @@ static void play_delayed(struct usb_serial_port *port)
 	data = port->serial->private;
 	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (!err)
+		if (!err) {
 			data->in_flight++;
+		} else {
+			/* we have to throw away the rest */
+			do {
+				unbusy_queued_urb(urb, portdata);
+				//extremely dirty
+				atomic_dec(&port->serial->interface->dev.power.usage_count);
+			} while ((urb = usb_get_from_anchor(&portdata->delayed)));
+			break;
+		}
 	}
 }
 
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 49a489e..353aeb4 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -31,6 +31,16 @@ config USB_STORAGE_DEBUG
 	  Say Y here in order to have the USB Mass Storage code generate
 	  verbose debugging messages.
 
+config USB_STORAGE_REALTEK
+	tristate "Realtek Card Reader support"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support the power-saving function
+	  for Realtek RTS51xx USB card readers.
+
+	  If this driver is compiled as a module, it will be named ums-realtek.
+
+
 config USB_STORAGE_DATAFAB
 	tristate "Datafab Compact Flash Reader support"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index fcf14cd..0d2de97 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_USB_STORAGE_ISD200)	+= ums-isd200.o
 obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= ums-jumpshot.o
 obj-$(CONFIG_USB_STORAGE_KARMA)		+= ums-karma.o
 obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_REALTEK)	+= ums-realtek.o
 obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
 obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
 obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
@@ -42,6 +43,7 @@ ums-isd200-y		:= isd200.o
 ums-jumpshot-y		:= jumpshot.o
 ums-karma-y		:= karma.o
 ums-onetouch-y		:= onetouch.o
+ums-realtek-y		:= realtek_cr.o
 ums-sddr09-y		:= sddr09.o
 ums-sddr55-y		:= sddr55.o
 ums-usbat-y		:= shuttle_usbat.o
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
new file mode 100644
index 0000000..d509a4a
--- /dev/null
+++ b/drivers/usb/storage/realtek_cr.c
@@ -0,0 +1,675 @@
+/* Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   wwang (wei_wang@realsil.com.cn)
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/cdrom.h>
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/usb_usual.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Realtek USB Card Reader");
+MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.03");
+
+static int auto_delink_en = 1;
+module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
+
+struct rts51x_status {
+	u16 vid;
+	u16 pid;
+	u8 cur_lun;
+	u8 card_type;
+	u8 total_lun;
+	u16 fw_ver;
+	u8 phy_exist;
+	u8 multi_flag;
+	u8 multi_card;
+	u8 log_exist;
+	union {
+		u8 detailed_type1;
+		u8 detailed_type2;
+	} detailed_type;
+	u8 function[2];
+};
+
+struct rts51x_chip {
+	u16			vendor_id;
+	u16			product_id;
+	char			max_lun;
+
+	struct rts51x_status	*status;
+	int			status_len;
+
+	u32			flag;
+};
+
+/* flag definition */
+#define FLIDX_AUTO_DELINK		0x01
+
+#define SCSI_LUN(srb)			((srb)->device->lun)
+
+/* Bit Operation */
+#define SET_BIT(data, idx)		((data) |= 1 << (idx))
+#define CLR_BIT(data, idx)		((data) &= ~(1 << (idx)))
+#define CHK_BIT(data, idx)		((data) & (1 << (idx)))
+
+#define SET_AUTO_DELINK(chip)		((chip)->flag |= FLIDX_AUTO_DELINK)
+#define CLR_AUTO_DELINK(chip)		((chip)->flag &= ~FLIDX_AUTO_DELINK)
+#define CHK_AUTO_DELINK(chip)		((chip)->flag & FLIDX_AUTO_DELINK)
+
+#define RTS51X_GET_VID(chip)		((chip)->vendor_id)
+#define RTS51X_GET_PID(chip)		((chip)->product_id)
+
+#define FW_VERSION(chip)		((chip)->status[0].fw_ver)
+#define STATUS_LEN(chip)		((chip)->status_len)
+
+/* Check card reader function */
+#define SUPPORT_DETAILED_TYPE1(chip)	\
+		CHK_BIT((chip)->status[0].function[0], 1)
+#define SUPPORT_OT(chip)		\
+		CHK_BIT((chip)->status[0].function[0], 2)
+#define SUPPORT_OC(chip)		\
+		CHK_BIT((chip)->status[0].function[0], 3)
+#define SUPPORT_AUTO_DELINK(chip)	\
+		CHK_BIT((chip)->status[0].function[0], 4)
+#define SUPPORT_SDIO(chip)		\
+		CHK_BIT((chip)->status[0].function[1], 0)
+#define SUPPORT_DETAILED_TYPE2(chip)	\
+		CHK_BIT((chip)->status[0].function[1], 1)
+
+#define CHECK_PID(chip, pid)		(RTS51X_GET_PID(chip) == (pid))
+#define CHECK_FW_VER(chip, fw_ver)	(FW_VERSION(chip) == (fw_ver))
+#define CHECK_ID(chip, pid, fw_ver)	\
+		(CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver)))
+
+#define wait_timeout_x(task_state, msecs)	\
+do {						\
+	set_current_state((task_state));	\
+	schedule_timeout((msecs) * HZ / 1000);	\
+} while (0)
+
+#define wait_timeout(msecs)		\
+		wait_timeout_x(TASK_INTERRUPTIBLE, (msecs))
+
+static int init_realtek_cr(struct us_data *us);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{\
+	USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+	.driver_info = (flags)|(USB_US_TYPE_STOR<<24)\
+}
+
+static const struct usb_device_id realtek_cr_ids[] = {
+#	include "unusual_realtek.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, realtek_cr_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev realtek_cr_unusual_dev_list[] = {
+#	include "unusual_realtek.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int rts51x_bulk_transport(struct us_data *us, u8 lun,
+				 u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+				 enum dma_data_direction dir, int *act_len)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+	int result;
+	unsigned int residue;
+	unsigned int cswlen;
+	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+	/* set up the command wrapper */
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = cpu_to_le32(buf_len);
+	bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0;
+	bcb->Tag = ++us->tag;
+	bcb->Lun = lun;
+	bcb->Length = cmd_len;
+
+	/* copy the command payload */
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, cmd, bcb->Length);
+
+	/* send it to out endpoint */
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+				bcb, cbwlen, NULL);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* DATA STAGE */
+	/* send/receive data payload, if there is any */
+
+	if (buf && buf_len) {
+		unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_buf(us, pipe,
+				buf, buf_len, NULL);
+		if (result == USB_STOR_XFER_ERROR)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* get CSW for device status */
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+				bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* check bulk status */
+	if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) {
+		US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n",
+			  le32_to_cpu(bcs->Signature),
+			  US_BULK_CS_SIGN);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	residue = bcs->Residue;
+	if (bcs->Tag != us->tag)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us */
+	if (residue)
+		residue = residue < buf_len ? residue : buf_len;
+
+	if (act_len)
+		*act_len = buf_len - residue;
+
+	/* based on the status code, we report good or bad */
+	switch (bcs->Status) {
+	case US_BULK_STAT_OK:
+		/* command good -- note that data could be short */
+		return USB_STOR_TRANSPORT_GOOD;
+
+	case US_BULK_STAT_FAIL:
+		/* command failed */
+		return USB_STOR_TRANSPORT_FAILED;
+
+	case US_BULK_STAT_PHASE:
+		/* phase error -- note that a transport reset will be
+			* invoked by the invoke_transport() function
+			*/
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* we should never get here, but if we do, we're in trouble */
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+/* Determine what the maximum LUN supported is */
+static int rts51x_get_max_lun(struct us_data *us)
+{
+	int result;
+
+	/* issue the command */
+	us->iobuf[0] = 0;
+	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+				 US_BULK_GET_MAX_LUN,
+				 USB_DIR_IN | USB_TYPE_CLASS |
+				 USB_RECIP_INTERFACE,
+				 0, us->ifnum, us->iobuf, 1, 10*HZ);
+
+	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
+		  result, us->iobuf[0]);
+
+	/* if we have a successful request, return the result */
+	if (result > 0)
+		return us->iobuf[0];
+
+	return 0;
+}
+
+static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+	int retval;
+	u8 cmnd[12] = {0};
+
+	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0D;
+	cmnd[2] = (u8)(addr >> 8);
+	cmnd[3] = (u8)addr;
+	cmnd[4] = (u8)(len >> 8);
+	cmnd[5] = (u8)len;
+
+	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+				       data, len, DMA_FROM_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	return 0;
+}
+
+static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+	int retval;
+	u8 cmnd[12] = {0};
+
+	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0E;
+	cmnd[2] = (u8)(addr >> 8);
+	cmnd[3] = (u8)addr;
+	cmnd[4] = (u8)(len >> 8);
+	cmnd[5] = (u8)len;
+
+	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+				       data, len, DMA_TO_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	return 0;
+}
+
+static int rts51x_read_status(struct us_data *us,
+			      u8 lun, u8 *status, int len, int *actlen)
+{
+	int retval;
+	u8 cmnd[12] = {0};
+
+	US_DEBUGP("%s, lun = %d\n", __func__, lun);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x09;
+
+	retval = rts51x_bulk_transport(us, lun, cmnd, 12,
+				       status, len, DMA_FROM_DEVICE, actlen);
+	if (retval != USB_STOR_TRANSPORT_GOOD)
+		return -EIO;
+
+	return 0;
+}
+
+static int rts51x_check_status(struct us_data *us, u8 lun)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 buf[16];
+
+	retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len));
+	if (retval < 0)
+		return -EIO;
+
+	US_DEBUGP("chip->status_len = %d\n", chip->status_len);
+
+	chip->status[lun].vid = ((u16)buf[0] << 8) | buf[1];
+	chip->status[lun].pid = ((u16)buf[2] << 8) | buf[3];
+	chip->status[lun].cur_lun = buf[4];
+	chip->status[lun].card_type = buf[5];
+	chip->status[lun].total_lun = buf[6];
+	chip->status[lun].fw_ver = ((u16)buf[7] << 8) | buf[8];
+	chip->status[lun].phy_exist = buf[9];
+	chip->status[lun].multi_flag = buf[10];
+	chip->status[lun].multi_card = buf[11];
+	chip->status[lun].log_exist = buf[12];
+	if (chip->status_len == 16) {
+		chip->status[lun].detailed_type.detailed_type1 = buf[13];
+		chip->status[lun].function[0] = buf[14];
+		chip->status[lun].function[1] = buf[15];
+	}
+
+	return 0;
+}
+
+static int enable_oscillator(struct us_data *us)
+{
+	int retval;
+	u8 value;
+
+	retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	value |= 0x04;
+	retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (!(value & 0x04))
+		return -EIO;
+
+	return 0;
+}
+
+static int do_config_autodelink(struct us_data *us, int enable, int force)
+{
+	int retval;
+	u8 value;
+
+	retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (enable) {
+		if (force)
+			value |= 0x03;
+		else
+			value |= 0x01;
+	} else {
+		value &= ~0x03;
+	}
+
+	US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value);
+
+	retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int config_autodelink_after_power_on(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 value;
+
+	if (!CHK_AUTO_DELINK(chip))
+		return 0;
+
+	retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+	if (retval < 0)
+		return -EIO;
+
+	if (auto_delink_en) {
+		CLR_BIT(value, 0);
+		CLR_BIT(value, 1);
+		SET_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			CLR_BIT(value, 2);
+
+		SET_BIT(value, 7);
+
+		retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		retval = enable_oscillator(us);
+		if (retval == 0)
+			(void)do_config_autodelink(us, 1, 0);
+	} else {
+		/* Autodelink controlled by firmware */
+
+		SET_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			CLR_BIT(value, 2);
+
+		if (CHECK_ID(chip, 0x0159, 0x5889) ||
+				CHECK_ID(chip, 0x0138, 0x3880)) {
+			CLR_BIT(value, 0);
+			CLR_BIT(value, 7);
+		}
+
+		retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0xFF;
+			retval = rts51x_write_mem(us, 0xFE79, &value, 1);
+			if (retval < 0)
+				return -EIO;
+
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int config_autodelink_before_power_down(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 value;
+
+	if (!CHK_AUTO_DELINK(chip))
+		return 0;
+
+	if (auto_delink_en) {
+		retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		SET_BIT(value, 2);
+		retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+
+		retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+		if (retval < 0)
+			return -EIO;
+
+		SET_BIT(value, 0);
+		if (CHECK_ID(chip, 0x0138, 0x3882))
+			SET_BIT(value, 2);
+		retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+		if (retval < 0)
+			return -EIO;
+	} else {
+		if (CHECK_ID(chip, 0x0159, 0x5889) ||
+				CHECK_ID(chip, 0x0138, 0x3880) ||
+				CHECK_ID(chip, 0x0138, 0x3882)) {
+			retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+			if (retval < 0)
+				return -EIO;
+
+			if (CHECK_ID(chip, 0x0159, 0x5889) ||
+					CHECK_ID(chip, 0x0138, 0x3880)) {
+				SET_BIT(value, 0);
+				SET_BIT(value, 7);
+			}
+
+			if (CHECK_ID(chip, 0x0138, 0x3882))
+				SET_BIT(value, 2);
+
+			retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+
+		if (CHECK_ID(chip, 0x0159, 0x5888)) {
+			value = 0x01;
+			retval = rts51x_write_mem(us, 0x48, &value, 1);
+			if (retval < 0)
+				return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static void realtek_cr_destructor(void *extra)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)extra;
+
+	if (!chip)
+		return;
+
+	kfree(chip->status);
+}
+
+#ifdef CONFIG_PM
+static void realtek_pm_hook(struct us_data *us, int pm_state)
+{
+	if (pm_state == US_SUSPEND)
+		(void)config_autodelink_before_power_down(us);
+}
+#endif
+
+static int init_realtek_cr(struct us_data *us)
+{
+	struct rts51x_chip *chip;
+	int size, i, retval;
+
+	chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	us->extra = chip;
+	us->extra_destructor = realtek_cr_destructor;
+#ifdef CONFIG_PM
+	us->suspend_resume_hook = realtek_pm_hook;
+#endif
+
+	us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+
+	US_DEBUGP("chip->max_lun = %d\n", chip->max_lun);
+
+	size = (chip->max_lun + 1) * sizeof(struct rts51x_status);
+	chip->status = kzalloc(size, GFP_KERNEL);
+	if (!chip->status)
+		goto INIT_FAIL;
+
+	for (i = 0; i <= (int)(chip->max_lun); i++) {
+		retval = rts51x_check_status(us, (u8)i);
+		if (retval < 0)
+			goto INIT_FAIL;
+	}
+
+	if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) ||
+			CHECK_FW_VER(chip, 0x5901))
+		SET_AUTO_DELINK(chip);
+	if (STATUS_LEN(chip) == 16) {
+		if (SUPPORT_AUTO_DELINK(chip))
+			SET_AUTO_DELINK(chip);
+	}
+
+	US_DEBUGP("chip->flag = 0x%x\n", chip->flag);
+
+	(void)config_autodelink_after_power_on(us);
+
+	return 0;
+
+INIT_FAIL:
+	if (us->extra) {
+		kfree(chip->status);
+		kfree(us->extra);
+		us->extra = NULL;
+	}
+
+	return -EIO;
+}
+
+static int realtek_cr_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	US_DEBUGP("Probe Realtek Card Reader!\n");
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - realtek_cr_ids) + realtek_cr_unusual_dev_list);
+	if (result)
+		return result;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver realtek_cr_driver = {
+	.name =		"ums-realtek",
+	.probe =	realtek_cr_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	realtek_cr_ids,
+	.soft_unbind =	1,
+};
+
+static int __init realtek_cr_init(void)
+{
+	return usb_register(&realtek_cr_driver);
+}
+
+static void __exit realtek_cr_exit(void)
+{
+	usb_deregister(&realtek_cr_driver);
+}
+
+module_init(realtek_cr_init);
+module_exit(realtek_cr_exit);
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index ceba512..1deca07 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -126,13 +126,11 @@ static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 int sierra_ms_init(struct us_data *us)
 {
 	int result, retries;
-	signed long delay_t;
 	struct swoc_info *swocInfo;
 	struct usb_device *udev;
 	struct Scsi_Host *sh;
 	struct scsi_device *sd;
 
-	delay_t = 2;
 	retries = 3;
 	result = 0;
 	udev = us->pusb_dev;
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
new file mode 100644
index 0000000..3236e03
--- /dev/null
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -0,0 +1,41 @@
+/* Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   wwang (wei_wang@realsil.com.cn)
+ *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#if defined(CONFIG_USB_STORAGE_REALTEK) || \
+		defined(CONFIG_USB_STORAGE_REALTEK_MODULE)
+
+UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0),
+
+#endif  /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
index 468bde7..4293077 100644
--- a/drivers/usb/storage/usual-tables.c
+++ b/drivers/usb/storage/usual-tables.c
@@ -85,6 +85,7 @@ static struct ignore_entry ignore_ids[] = {
 #	include "unusual_jumpshot.h"
 #	include "unusual_karma.h"
 #	include "unusual_onetouch.h"
+#	include "unusual_realtek.h"
 #	include "unusual_sddr09.h"
 #	include "unusual_sddr55.h"
 #	include "unusual_usbat.h"
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index a68ad7a..c175b73 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -156,7 +156,7 @@ int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
 EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
 
 /*
- * Return the hub's desciptor
+ * Return the hub's descriptor
  *
  * NOTE: almost cut and paste from ehci-hub.c
  *
@@ -184,8 +184,8 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
 	descr->bPwrOn2PwrGood = 0;
 	descr->bHubContrCurrent = 0;
 	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset(&descr->bitmap[0], 0, temp);
-	memset(&descr->bitmap[temp], 0xff, temp);
+	memset(&descr->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp);
 	return 0;
 }
 
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 2054d4e..0faca16 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -320,7 +320,7 @@ u8 wusb_cluster_id_get(void)
 	u8 id;
 	spin_lock(&wusb_cluster_ids_lock);
 	id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS);
-	if (id > CLUSTER_IDS) {
+	if (id >= CLUSTER_IDS) {
 		id = 0;
 		goto out;
 	}
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 3d94c42..6bd426b 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -132,7 +132,7 @@ static inline void wusb_dev_put(struct wusb_dev *wusb_dev)
 }
 
 /**
- * Wireless USB Host Controlller root hub "fake" ports
+ * Wireless USB Host Controller root hub "fake" ports
  * (state and device information)
  *
  * Wireless USB is wireless, so there are no ports; but we
diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c
index 76a1a1e..367aa12 100644
--- a/drivers/uwb/scan.c
+++ b/drivers/uwb/scan.c
@@ -42,7 +42,7 @@
 /**
  * Start/stop scanning in a radio controller
  *
- * @rc:      UWB Radio Controlller
+ * @rc:      UWB Radio Controller
  * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12]
  * @type:    Type of scanning to do.
  * @bpst_offset: value at which to start scanning (if type ==
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 61b9609..a4bd05b 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -600,6 +600,8 @@ struct twl4030_usb_data {
 	int		(*phy_power)(struct device *dev, int iD, int on);
 	/* enable/disable  phy clocks */
 	int		(*phy_set_clock)(struct device *dev, int on);
+	/* suspend/resume of phy */
+	int		(*phy_suspend)(struct device *dev, int suspend);
 };
 
 struct twl4030_ins {
diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h
new file mode 100644
index 0000000..6bca5b5
--- /dev/null
+++ b/include/linux/platform_data/tegra_usb.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+enum tegra_usb_operating_modes {
+	TEGRA_USB_DEVICE,
+	TEGRA_USB_HOST,
+	TEGRA_USB_OTG,
+};
+
+struct tegra_ehci_platform_data {
+	enum tegra_usb_operating_modes operating_mode;
+	/* power down the phy on bus suspend */
+	int power_down_on_bus_suspend;
+	void *phy_config;
+};
+
+#endif /* _TEGRA_USB_H_ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index bd69b65..e63efeb 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -976,6 +976,7 @@ extern int usb_disabled(void);
 #define URB_SETUP_MAP_SINGLE	0x00100000	/* Setup packet DMA mapped */
 #define URB_SETUP_MAP_LOCAL	0x00200000	/* HCD-local setup packet */
 #define URB_DMA_SG_COMBINED	0x00400000	/* S-G entries were combined */
+#define URB_ALIGNED_TEMP_BUFFER	0x00800000	/* Temp buffer was alloc'd */
 
 struct usb_iso_packet_descriptor {
 	unsigned int offset;
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index 51410e0..ed91fb6 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -2,6 +2,7 @@ header-y += audio.h
 header-y += cdc.h
 header-y += ch9.h
 header-y += ch11.h
+header-y += functionfs.h
 header-y += gadgetfs.h
 header-y += midi.h
 header-y += g_printer.h
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 10ec069..4ebaf08 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -26,6 +26,7 @@
 #define HUB_RESET_TT		9
 #define HUB_GET_TT_STATE	10
 #define HUB_STOP_TT		11
+#define HUB_SET_DEPTH		12
 
 /*
  * Hub class additional requests defined by USB 3.0 spec
@@ -61,6 +62,12 @@
 #define USB_PORT_FEAT_TEST              21
 #define USB_PORT_FEAT_INDICATOR         22
 #define USB_PORT_FEAT_C_PORT_L1         23
+#define USB_PORT_FEAT_C_PORT_LINK_STATE	25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
+#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
+#define USB_PORT_FEAT_BH_PORT_RESET     28
+#define USB_PORT_FEAT_C_BH_PORT_RESET   29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
 
 /*
  * Port feature selectors added by USB 3.0 spec.
@@ -102,7 +109,6 @@ struct usb_port_status {
 #define USB_PORT_STAT_TEST              0x0800
 #define USB_PORT_STAT_INDICATOR         0x1000
 /* bits 13 to 15 are reserved */
-#define USB_PORT_STAT_SUPER_SPEED	0x8000	/* Linux-internal */
 
 /*
  * Additions to wPortStatus bit field from USB 3.0
@@ -110,8 +116,14 @@ struct usb_port_status {
  */
 #define USB_PORT_STAT_LINK_STATE	0x01e0
 #define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_SS_PORT_STAT_SPEED		0x1c00
 #define USB_PORT_STAT_SPEED_5GBPS	0x0000
 /* Valid only if port is enabled */
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |	    \
+				USB_PORT_STAT_ENABLE |	    \
+				USB_PORT_STAT_OVERCURRENT | \
+				USB_PORT_STAT_RESET)
 
 /*
  * Definitions for PORT_LINK_STATE values
@@ -132,8 +144,8 @@ struct usb_port_status {
 
 /*
  * wPortChange bit field
- * See USB 2.0 spec Table 11-22
- * Bits 0 to 4 shown, bits 5 to 15 are reserved
+ * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
+ * Bits 0 to 5 shown, bits 6 to 15 are reserved
  */
 #define USB_PORT_STAT_C_CONNECTION	0x0001
 #define USB_PORT_STAT_C_ENABLE		0x0002
@@ -141,6 +153,13 @@ struct usb_port_status {
 #define USB_PORT_STAT_C_OVERCURRENT	0x0008
 #define USB_PORT_STAT_C_RESET		0x0010
 #define USB_PORT_STAT_C_L1		0x0020
+/*
+ * USB 3.0 wPortChange bit fields
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_PORT_STAT_C_BH_RESET	0x0020
+#define USB_PORT_STAT_C_LINK_STATE	0x0040
+#define USB_PORT_STAT_C_CONFIG_ERROR	0x0080
 
 /*
  * wHubCharacteristics (masks)
@@ -175,7 +194,9 @@ struct usb_hub_status {
  */
 
 #define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB			(USB_TYPE_CLASS | 0x0a)
 #define USB_DT_HUB_NONVAR_SIZE		7
+#define USB_DT_SS_HUB_SIZE              12
 
 struct usb_hub_descriptor {
 	__u8  bDescLength;
@@ -184,11 +205,22 @@ struct usb_hub_descriptor {
 	__le16 wHubCharacteristics;
 	__u8  bPwrOn2PwrGood;
 	__u8  bHubContrCurrent;
-		/* add 1 bit for hub status change; round to bytes */
-	__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
-	__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
-} __attribute__ ((packed));
 
+	/* 2.0 and 3.0 hubs differ here */
+	union {
+		struct {
+			/* add 1 bit for hub status change; round to bytes */
+			__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+			__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+		}  __attribute__ ((packed)) hs;
+
+		struct {
+			__u8 bHubHdrDecLat;
+			__u16 wHubDelay;
+			__u16 DeviceRemovable;
+		}  __attribute__ ((packed)) ss;
+	} u;
+} __attribute__ ((packed));
 
 /* port indicator status selectors, tables 11-7 and 11-25 */
 #define HUB_LED_AUTO	0
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index ab46194..b72f305 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -584,7 +584,9 @@ struct usb_ss_ep_comp_descriptor {
 
 #define USB_DT_SS_EP_COMP_SIZE		6
 /* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-#define USB_SS_MAX_STREAMS(p)		(1 << (p & 0x1f))
+#define USB_SS_MAX_STREAMS(p)		(1 << ((p) & 0x1f))
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 2e262cb..6563802 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -127,7 +127,9 @@ struct ehci_regs {
 #define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
 #define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
 /* 19:16 for port testing */
-#define PORT_TEST_PKT	(0x4<<16)	/* Port Test Control - packet test */
+#define PORT_TEST(x)	(((x)&0xf)<<16)	/* Port Test Control */
+#define PORT_TEST_PKT	PORT_TEST(0x4)	/* Port Test Control - packet test */
+#define PORT_TEST_FORCE	PORT_TEST(0x5)	/* Port Test Control - force enable */
 #define PORT_LED_OFF	(0<<14)
 #define PORT_LED_AMBER	(1<<14)
 #define PORT_LED_GREEN	(2<<14)
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index a854fe8..0097136 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -76,6 +76,10 @@ struct usb_hcd {
 	struct kref		kref;		/* reference counter */
 
 	const char		*product_desc;	/* product/vendor string */
+	int			speed;		/* Speed for this roothub.
+						 * May be different from
+						 * hcd->driver->flags & HCD_MASK
+						 */
 	char			irq_descr[24];	/* driver + bus # */
 
 	struct timer_list	rh_timer;	/* drives root-hub polling */
@@ -99,6 +103,8 @@ struct usb_hcd {
 #define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
 #define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
 #define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
+#define HCD_FLAG_DEAD			6	/* controller has died? */
 
 	/* The flags can be tested using these macros; they are likely to
 	 * be slightly faster than test_bit().
@@ -108,6 +114,8 @@ struct usb_hcd {
 #define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
 #define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
 #define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
 
 	/* Flags that get set only during HCD registration or removal. */
 	unsigned		rh_registered:1;/* is root hub registered? */
@@ -138,7 +146,9 @@ struct usb_hcd {
 	 * bandwidth_mutex should be dropped after a successful control message
 	 * to the device, or resetting the bandwidth after a failed attempt.
 	 */
-	struct mutex		bandwidth_mutex;
+	struct mutex		*bandwidth_mutex;
+	struct usb_hcd		*shared_hcd;
+	struct usb_hcd		*primary_hcd;
 
 
 #define HCD_BUFFER_POOLS	4
@@ -201,6 +211,7 @@ struct hc_driver {
 	int	flags;
 #define	HCD_MEMORY	0x0001		/* HC regs use memory (else I/O) */
 #define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
+#define	HCD_SHARED	0x0004		/* Two (or more) usb_hcds share HW */
 #define	HCD_USB11	0x0010		/* USB 1.1 */
 #define	HCD_USB2	0x0020		/* USB 2.0 */
 #define	HCD_USB3	0x0040		/* USB 3.0 */
@@ -234,6 +245,19 @@ struct hc_driver {
 	int	(*urb_dequeue)(struct usb_hcd *hcd,
 				struct urb *urb, int status);
 
+	/*
+	 * (optional) these hooks allow an HCD to override the default DMA
+	 * mapping and unmapping routines.  In general, they shouldn't be
+	 * necessary unless the host controller has special DMA requirements,
+	 * such as alignment contraints.  If these are not specified, the
+	 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+	 * (and it may be a good idea to call these functions in your HCD
+	 * implementation)
+	 */
+	int	(*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+				   gfp_t mem_flags);
+	void    (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
 	/* hw synch, freeing endpoint resources that urb_dequeue can't */
 	void	(*endpoint_disable)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
@@ -330,8 +354,10 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
 		int status);
-extern void unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
-extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
@@ -347,8 +373,12 @@ extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
 		struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *shared_hcd);
 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
 extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
 extern int usb_add_hcd(struct usb_hcd *hcd,
 		unsigned int irqnum, unsigned long irqflags);
 extern void usb_remove_hcd(struct usb_hcd *hcd);
@@ -622,13 +652,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
 
 /*-------------------------------------------------------------------------*/
 
-/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
-/* bleech -- resurfaced in 2.4.11 or 2.4.12 */
-#define bitmap	DeviceRemovable
-
-
-/*-------------------------------------------------------------------------*/
-
 /* random stuff */
 
 #define	RUN_CONTEXT (in_irq() ? "in_irq" \
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 3675e03..3657403 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -55,7 +55,7 @@ enum otg_control_type {
 
 /**
  * struct msm_otg_platform_data - platform device data
- *              for msm72k_otg driver.
+ *              for msm_otg driver.
  * @phy_init_seq: PHY configuration sequence. val, reg pairs
  *              terminated by -1.
  * @vbus_power: VBUS power on/off routine.
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index a1a1e7a..6e40718 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -66,6 +66,7 @@ struct otg_transceiver {
 
 	u8			default_a;
 	enum usb_otg_state	state;
+	enum usb_xceiv_events	last_event;
 
 	struct usb_bus		*host;
 	struct usb_gadget	*gadget;
@@ -74,7 +75,7 @@ struct otg_transceiver {
 	void __iomem			*io_priv;
 
 	/* for notification of usb_xceiv_events */
-	struct blocking_notifier_head	notifier;
+	struct atomic_notifier_head	notifier;
 
 	/* to pass extra port status to the root hub */
 	u16			port_status;
@@ -234,13 +235,13 @@ otg_start_srp(struct otg_transceiver *otg)
 static inline int
 otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&otg->notifier, nb);
+	return atomic_notifier_chain_register(&otg->notifier, nb);
 }
 
 static inline void
 otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
 {
-	blocking_notifier_chain_unregister(&otg->notifier, nb);
+	atomic_notifier_chain_unregister(&otg->notifier, nb);
 }
 
 /* for OTG controller drivers (and maybe other stuff) */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index c904913..45f3b9d 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -191,7 +191,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_ports: the number of different ports this device will have.
- * @bulk_in_size: bytes to allocate for bulk-in buffer (0 = end-point size)
+ * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
+ *	(0 = end-point size)
  * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
  * @calc_num_ports: pointer to a function to determine how many ports this
  *	device has dynamically.  It will be called after the probe()
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 82b1507..9595796 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -184,4 +184,9 @@
 struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
 					unsigned int flags);
 
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+/* access ops for controllers with a viewport register */
+extern struct otg_io_access_ops ulpi_viewport_access_ops;
+#endif
+
 #endif /* __LINUX_USB_ULPI_H */
diff --git a/tools/usb/Makefile b/tools/usb/Makefile
new file mode 100644
index 0000000..8b704af
--- /dev/null
+++ b/tools/usb/Makefile
@@ -0,0 +1,13 @@
+# Makefile for USB tools
+
+CC = $(CROSS_COMPILE)gcc
+PTHREAD_LIBS = -lpthread
+WARNINGS = -Wall -Wextra
+CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS)
+
+all: testusb ffs-test
+%: %.c
+	$(CC) $(CFLAGS) -o $@ $^
+
+clean:
+	$(RM) testusb ffs-test
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index bbe2e3a..b9c7986 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -37,7 +37,7 @@
 #include <sys/types.h>
 #include <unistd.h>
 
-#include <linux/usb/functionfs.h>
+#include "../../include/linux/usb/functionfs.h"
 
 
 /******************** Little Endian Handling ********************************/
@@ -450,7 +450,7 @@ invalid:
 		    len, expected, *p);
 		for (p = buf, len = 0; len < nbytes; ++p, ++len) {
 			if (0 == (len % 32))
-				fprintf(stderr, "%4d:", len);
+				fprintf(stderr, "%4zd:", len);
 			fprintf(stderr, " %02x", *p);
 			if (31 == (len % 32))
 				fprintf(stderr, "\n");
diff --git a/tools/usb/hcd-tests.sh b/tools/usb/hcd-tests.sh
new file mode 100644
index 0000000..b30b3dc
--- /dev/null
+++ b/tools/usb/hcd-tests.sh
@@ -0,0 +1,275 @@
+#!/bin/sh
+#
+# test types can be passed on the command line:
+#
+# - control: any device can do this
+# - out, in:  out needs 'bulk sink' firmware, in needs 'bulk src'
+# - iso-out, iso-in:  out needs 'iso sink' firmware, in needs 'iso src'
+# - halt: needs bulk sink+src, tests halt set/clear from host
+# - unlink: needs bulk sink and/or src, test HCD unlink processing
+# - loop: needs firmware that will buffer N transfers
+#
+# run it for hours, days, weeks.
+#
+
+#
+# this default provides a steady test load for a bulk device
+#
+TYPES='control out in'
+#TYPES='control out in halt'
+
+#
+# to test HCD code
+#
+#  - include unlink tests
+#  - add some ${RANDOM}ness
+#  - connect several devices concurrently (same HC)
+#  - keep HC's IRQ lines busy with unrelated traffic (IDE, net, ...)
+#  - add other concurrent system loads
+#
+
+declare -i COUNT BUFLEN
+
+COUNT=50000
+BUFLEN=2048
+
+# NOTE:  the 'in' and 'out' cases are usually bulk, but can be
+# set up to use interrupt transfers by 'usbtest' module options
+
+
+if [ "$DEVICE" = "" ]; then
+	echo "testing ALL recognized usbtest devices"
+	echo ""
+	TEST_ARGS="-a"
+else
+	TEST_ARGS=""
+fi
+
+do_test ()
+{
+    if ! ./testusb $TEST_ARGS -s $BUFLEN -c $COUNT $* 2>/dev/null
+    then
+	echo "FAIL"
+	exit 1
+    fi
+}
+
+ARGS="$*"
+
+if [ "$ARGS" = "" ];
+then
+    ARGS="$TYPES"
+fi
+
+# FIXME use /sys/bus/usb/device/$THIS/bConfigurationValue to
+# check and change configs
+
+CONFIG=''
+
+check_config ()
+{
+    if [ "$CONFIG" = "" ]; then
+	CONFIG=$1
+	echo "assuming $CONFIG configuration"
+	return
+    fi
+    if [ "$CONFIG" = $1 ]; then
+	return
+    fi
+
+    echo "** device must be in $1 config, but it's $CONFIG instead"
+    exit 1
+}
+
+
+echo "TESTING:  $ARGS"
+
+while : true
+do
+    echo $(date)
+
+    for TYPE in $ARGS
+    do
+	# restore defaults
+	COUNT=5000
+	BUFLEN=2048
+
+	# FIXME automatically multiply COUNT by 10 when
+	# /sys/bus/usb/device/$THIS/speed == "480"
+
+#	COUNT=50000
+
+	case $TYPE in
+	control)
+	    # any device, in any configuration, can use this.
+	    echo '** Control test cases:'
+
+	    echo "test 9: ch9 postconfig"
+	    do_test -t 9 -c 5000
+	    echo "test 10: control queueing"
+	    do_test -t 10 -c 5000
+
+	    # this relies on some vendor-specific commands
+	    echo "test 14: control writes"
+	    do_test -t 14 -c 15000 -s 256 -v 1
+
+	    echo "test 21: control writes, unaligned"
+	    do_test -t 21 -c 100 -s 256 -v 1
+
+	    ;;
+
+	out)
+	    check_config sink-src
+	    echo '** Host Write (OUT) test cases:'
+
+	    echo "test 1: $COUNT transfers, same size"
+	    do_test -t 1
+	    echo "test 3: $COUNT transfers, variable/short size"
+	    do_test -t 3 -v 421
+
+	    COUNT=100
+	    echo "test 17: $COUNT transfers, unaligned DMA map by core"
+	    do_test -t 17
+
+	    echo "test 19: $COUNT transfers, unaligned DMA map by usb_alloc_coherent"
+	    do_test -t 19
+
+	    COUNT=2000
+	    echo "test 5: $COUNT scatterlists, same size entries"
+	    do_test -t 5
+
+	    # try to trigger short OUT processing bugs
+	    echo "test 7a: $COUNT scatterlists, variable size/short entries"
+	    do_test -t 7 -v 579
+	    BUFLEN=4096
+	    echo "test 7b: $COUNT scatterlists, variable size/bigger entries"
+	    do_test -t 7 -v 41
+	    BUFLEN=64
+	    echo "test 7c: $COUNT scatterlists, variable size/micro entries"
+	    do_test -t 7 -v 63
+	    ;;
+
+	iso-out)
+	    check_config sink-src
+	    echo '** Host ISOCHRONOUS Write (OUT) test cases:'
+
+	    # at peak iso transfer rates:
+	    # - usb 2.0 high bandwidth, this is one frame.
+	    # - usb 1.1, it's twenty-four frames.
+	    BUFLEN=24500
+
+	    COUNT=1000
+
+# COUNT=10000
+
+	    echo "test 15: $COUNT transfers, same size"
+	    # do_test -t 15 -g 3 -v 0
+	    BUFLEN=32768
+	    do_test -t 15 -g 8 -v 0
+
+	    # FIXME it'd make sense to have an iso OUT test issuing
+	    # short writes on more packets than the last one
+
+	    COUNT=100
+	    echo "test 22: $COUNT transfers, non aligned"
+	    do_test -t 22 -g 8 -v 0
+
+	    ;;
+
+	in)
+	    check_config sink-src
+	    echo '** Host Read (IN) test cases:'
+
+	    # NOTE:  these "variable size" reads are just multiples
+	    # of 512 bytes, no EOVERFLOW testing is done yet
+
+	    echo "test 2: $COUNT transfers, same size"
+	    do_test -t 2
+	    echo "test 4: $COUNT transfers, variable size"
+	    do_test -t 4
+
+	    COUNT=100
+	    echo "test 18: $COUNT transfers, unaligned DMA map by core"
+	    do_test -t 18
+
+	    echo "test 20: $COUNT transfers, unaligned DMA map by usb_alloc_coherent"
+	    do_test -t 20
+
+	    COUNT=2000
+	    echo "test 6: $COUNT scatterlists, same size entries"
+	    do_test -t 6
+	    echo "test 8: $COUNT scatterlists, variable size entries"
+	    do_test -t 8
+	    ;;
+
+	iso-in)
+	    check_config sink-src
+	    echo '** Host ISOCHRONOUS Read (IN) test cases:'
+
+	    # at peak iso transfer rates:
+	    # - usb 2.0 high bandwidth, this is one frame.
+	    # - usb 1.1, it's twenty-four frames.
+	    BUFLEN=24500
+
+	    COUNT=1000
+
+# COUNT=10000
+
+	    echo "test 16: $COUNT transfers, same size"
+	    # do_test -t 16 -g 3 -v 0
+	    BUFLEN=32768
+	    do_test -t 16 -g 8 -v 0
+
+	    # FIXME since iso expects faults, it'd make sense
+	    # to have an iso IN test issuing short reads ...
+
+	    COUNT=100
+	    echo "test 23: $COUNT transfers, unaligned"
+	    do_test -t 23 -g 8 -v 0
+
+	    ;;
+
+	halt)
+	    # NOTE:  sometimes hardware doesn't cooperate well with halting
+	    # endpoints from the host side.  so long as mass-storage class
+	    # firmware can halt them from the device, don't worry much if
+	    # you can't make this test work on your device.
+	    COUNT=2000
+	    echo "test 13: $COUNT halt set/clear"
+	    do_test -t 13
+	    ;;
+
+	unlink)
+	    COUNT=2000
+	    echo "test 11: $COUNT read unlinks"
+	    do_test -t 11
+
+	    echo "test 12: $COUNT write unlinks"
+	    do_test -t 12
+	    ;;
+
+	loop)
+	    # defaults need too much buffering for ez-usb devices
+	    BUFLEN=2048
+	    COUNT=32
+
+	    # modprobe g_zero qlen=$COUNT buflen=$BUFLEN loopdefault
+	    check_config loopback
+
+	    # FIXME someone needs to write and merge a version of this
+
+	    echo "write $COUNT buffers of $BUFLEN bytes, read them back"
+
+	    echo "write $COUNT variable size buffers, read them back"
+
+	    ;;
+
+	*)
+	    echo "Don't understand test type $TYPE"
+	    exit 1;
+	esac
+	echo ''
+    done
+done
+
+# vim: sw=4