[PATCH] kill old EH constants

Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

4 files changed, 3 insertions, 115 deletions

diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h
index 6e7bb06..e2360c2 100644
--- a/drivers/scsi/scsi.h
+++ b/drivers/scsi/scsi.h
@@ -60,12 +60,6 @@ struct scatterlist;
 #define scsi_to_pci_dma_dir(scsi_dir)	((int)(scsi_dir))
 #define scsi_to_sbus_dma_dir(scsi_dir)	((int)(scsi_dir))
 
-/*
- * This is the crap from the old error handling code.  We have it in a special
- * place so that we can more easily delete it later on.
- */
-#include "scsi_obsolete.h"
-
 /* obsolete typedef junk. */
 #include "scsi_typedefs.h"
 
diff --git a/drivers/scsi/scsi_obsolete.h b/drivers/scsi/scsi_obsolete.h
deleted file mode 100644
index abeacb9..0000000
--- a/drivers/scsi/scsi_obsolete.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  scsi_obsolete.h Copyright (C) 1997 Eric Youngdale
- *
- */
-
-#ifndef _SCSI_OBSOLETE_H
-#define _SCSI_OBSOLETE_H
-
-/*
- * These are the return codes for the abort and reset functions.  The mid-level
- * code uses these to decide what to do next.  Each of the low level abort
- * and reset functions must correctly indicate what it has done.
- * The descriptions are written from the point of view of the mid-level code,
- * so that the return code is telling the mid-level drivers exactly what
- * the low level driver has already done, and what remains to be done.
- */
-
-/* We did not do anything.  
- * Wait some more for this command to complete, and if this does not work, 
- * try something more serious. */
-#define SCSI_ABORT_SNOOZE 0
-
-/* This means that we were able to abort the command.  We have already
- * called the mid-level done function, and do not expect an interrupt that 
- * will lead to another call to the mid-level done function for this command */
-#define SCSI_ABORT_SUCCESS 1
-
-/* We called for an abort of this command, and we should get an interrupt 
- * when this succeeds.  Thus we should not restore the timer for this
- * command in the mid-level abort function. */
-#define SCSI_ABORT_PENDING 2
-
-/* Unable to abort - command is currently on the bus.  Grin and bear it. */
-#define SCSI_ABORT_BUSY 3
-
-/* The command is not active in the low level code. Command probably
- * finished. */
-#define SCSI_ABORT_NOT_RUNNING 4
-
-/* Something went wrong.  The low level driver will indicate the correct
- * error condition when it calls scsi_done, so the mid-level abort function
- * can simply wait until this comes through */
-#define SCSI_ABORT_ERROR 5
-
-/* We do not know how to reset the bus, or we do not want to.  Bummer.
- * Anyway, just wait a little more for the command in question, and hope that
- * it eventually finishes.  If it never finishes, the SCSI device could
- * hang, so use this with caution. */
-#define SCSI_RESET_SNOOZE 0
-
-/* We do not know how to reset the bus, or we do not want to.  Bummer.
- * We have given up on this ever completing.  The mid-level code will
- * request sense information to decide how to proceed from here. */
-#define SCSI_RESET_PUNT 1
-
-/* This means that we were able to reset the bus.  We have restarted all of
- * the commands that should be restarted, and we should be able to continue
- * on normally from here.  We do not expect any interrupts that will return
- * DID_RESET to any of the other commands in the host_queue, and the mid-level
- * code does not need to do anything special to keep the commands alive. 
- * If a hard reset was performed then all outstanding commands on the
- * bus have been restarted. */
-#define SCSI_RESET_SUCCESS 2
-
-/* We called for a reset of this bus, and we should get an interrupt 
- * when this succeeds.  Each command should get its own status
- * passed up to scsi_done, but this has not happened yet. 
- * If a hard reset was performed, then we expect an interrupt
- * for *each* of the outstanding commands that will have the
- * effect of restarting the commands.
- */
-#define SCSI_RESET_PENDING 3
-
-/* We did a reset, but do not expect an interrupt to signal DID_RESET.
- * This tells the upper level code to request the sense info, and this
- * should keep the command alive. */
-#define SCSI_RESET_WAKEUP 4
-
-/* The command is not active in the low level code. Command probably
-   finished. */
-#define SCSI_RESET_NOT_RUNNING 5
-
-/* Something went wrong, and we do not know how to fix it. */
-#define SCSI_RESET_ERROR 6
-
-#define SCSI_RESET_SYNCHRONOUS		0x01
-#define SCSI_RESET_ASYNCHRONOUS		0x02
-#define SCSI_RESET_SUGGEST_BUS_RESET	0x04
-#define SCSI_RESET_SUGGEST_HOST_RESET	0x08
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a hard reset.
- */
-#define SCSI_RESET_BUS_RESET 0x100
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a host adapter reset.
- */
-#define SCSI_RESET_HOST_RESET 0x200
-/*
- * Used to mask off bits and to obtain the basic action that was
- * performed.  
- */
-#define SCSI_RESET_ACTION   0xff
-
-#endif				/* SCSI_OBSOLETE_H */
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 7484916..a00095c 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -945,7 +945,7 @@ static int ultrastor_abort(Scsi_Cmnd *SCpnt)
 	       config.mscp[mscp_index].SCint, SCpnt);
 #endif
     if (config.mscp[mscp_index].SCint == 0)
-	return SCSI_ABORT_NOT_RUNNING;
+	return FAILURE;
 
     if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
     config.mscp[mscp_index].SCint = NULL;
@@ -1020,7 +1020,7 @@ static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
 #endif
 
     spin_unlock_irqrestore(host->host_lock, flags);
-    return SCSI_RESET_SUCCESS;
+    return SUCCESS;
 
 }
 
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index de0d32f..cab89a9 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -335,7 +335,7 @@ static int mts_scsi_abort (Scsi_Cmnd *srb)
 
 	mts_urb_abort(desc);
 
-	return SCSI_ABORT_PENDING;
+	return FAILURE;
 }
 
 static int mts_scsi_host_reset (Scsi_Cmnd *srb)