summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2008-11-12 16:19:49 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2009-01-07 09:59:53 -0800
commit9ac39f28b5237a629e41ccfc1f73d3a55723045c (patch)
treec161d5b62d11b6e73605a37b2562b90fff689d9e
parentd4f373e57d3916814110968c5ea1155a8d972b5a (diff)
downloadop-kernel-dev-9ac39f28b5237a629e41ccfc1f73d3a55723045c.zip
op-kernel-dev-9ac39f28b5237a629e41ccfc1f73d3a55723045c.tar.gz
USB: add asynchronous autosuspend/autoresume support
This patch (as1160b) adds support routines for asynchronous autosuspend and autoresume, with accompanying documentation updates. There already are several potential users of this interface, and others are likely to arise as autosuspend support becomes more widespread. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--Documentation/usb/power-management.txt22
-rw-r--r--drivers/usb/core/driver.c86
-rw-r--r--drivers/usb/core/hub.c5
-rw-r--r--drivers/usb/core/usb.c1
-rw-r--r--drivers/usb/core/usb.h1
-rw-r--r--include/linux/usb.h9
6 files changed, 117 insertions, 7 deletions
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index e48ea1d..ad64261 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -313,11 +313,13 @@ three of the methods listed above. In addition, a driver indicates
that it supports autosuspend by setting the .supports_autosuspend flag
in its usb_driver structure. It is then responsible for informing the
USB core whenever one of its interfaces becomes busy or idle. The
-driver does so by calling these three functions:
+driver does so by calling these five functions:
int usb_autopm_get_interface(struct usb_interface *intf);
void usb_autopm_put_interface(struct usb_interface *intf);
int usb_autopm_set_interface(struct usb_interface *intf);
+ int usb_autopm_get_interface_async(struct usb_interface *intf);
+ void usb_autopm_put_interface_async(struct usb_interface *intf);
The functions work by maintaining a counter in the usb_interface
structure. When intf->pm_usage_count is > 0 then the interface is
@@ -330,10 +332,12 @@ associated with the device itself rather than any of its interfaces.
This field is used only by the USB core.)
The driver owns intf->pm_usage_count; it can modify the value however
-and whenever it likes. A nice aspect of the usb_autopm_* routines is
-that the changes they make are protected by the usb_device structure's
-PM mutex (udev->pm_mutex); however drivers may change pm_usage_count
-without holding the mutex.
+and whenever it likes. A nice aspect of the non-async usb_autopm_*
+routines is that the changes they make are protected by the usb_device
+structure's PM mutex (udev->pm_mutex); however drivers may change
+pm_usage_count without holding the mutex. Drivers using the async
+routines are responsible for their own synchronization and mutual
+exclusion.
usb_autopm_get_interface() increments pm_usage_count and
attempts an autoresume if the new value is > 0 and the
@@ -348,6 +352,14 @@ without holding the mutex.
is suspended, and it attempts an autosuspend if the value is
<= 0 and the device isn't suspended.
+ usb_autopm_get_interface_async() and
+ usb_autopm_put_interface_async() do almost the same things as
+ their non-async counterparts. The differences are: they do
+ not acquire the PM mutex, and they use a workqueue to do their
+ jobs. As a result they can be called in an atomic context,
+ such as an URB's completion handler, but when they return the
+ device will not generally not yet be in the desired state.
+
There also are a couple of utility routines drivers can use:
usb_autopm_enable() sets pm_usage_cnt to 0 and then calls
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 8c08130..23b3c7e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1341,6 +1341,19 @@ void usb_autosuspend_work(struct work_struct *work)
usb_autopm_do_device(udev, 0);
}
+/* usb_autoresume_work - callback routine to autoresume a USB device */
+void usb_autoresume_work(struct work_struct *work)
+{
+ struct usb_device *udev =
+ container_of(work, struct usb_device, autoresume);
+
+ /* Wake it up, let the drivers do their thing, and then put it
+ * back to sleep.
+ */
+ if (usb_autopm_do_device(udev, 1) == 0)
+ usb_autopm_do_device(udev, -1);
+}
+
/**
* usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
* @udev: the usb_device to autosuspend
@@ -1492,6 +1505,45 @@ void usb_autopm_put_interface(struct usb_interface *intf)
EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
/**
+ * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine does essentially the same thing as
+ * usb_autopm_put_interface(): it decrements @intf's usage counter and
+ * queues a delayed autosuspend request if the counter is <= 0. The
+ * difference is that it does not acquire the device's pm_mutex;
+ * callers must handle all synchronization issues themselves.
+ *
+ * Typically a driver would call this routine during an URB's completion
+ * handler, if no more URBs were pending.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_async(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int status = 0;
+
+ if (intf->condition == USB_INTERFACE_UNBOUND) {
+ status = -ENODEV;
+ } else {
+ udev->last_busy = jiffies;
+ --intf->pm_usage_cnt;
+ if (udev->autosuspend_disabled || udev->autosuspend_delay < 0)
+ status = -EPERM;
+ else if (intf->pm_usage_cnt <= 0 &&
+ !timer_pending(&udev->autosuspend.timer)) {
+ queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+ round_jiffies_relative(
+ udev->autosuspend_delay));
+ }
+ }
+ dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+ __func__, status, intf->pm_usage_cnt);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
+
+/**
* usb_autopm_get_interface - increment a USB interface's PM-usage counter
* @intf: the usb_interface whose counter should be incremented
*
@@ -1537,6 +1589,37 @@ int usb_autopm_get_interface(struct usb_interface *intf)
EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
/**
+ * usb_autopm_get_interface_async - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine does much the same thing as
+ * usb_autopm_get_interface(): it increments @intf's usage counter and
+ * queues an autoresume request if the result is > 0. The differences
+ * are that it does not acquire the device's pm_mutex (callers must
+ * handle all synchronization issues themselves), and it does not
+ * autoresume the device directly (it only queues a request). After a
+ * successful call, the device will generally not yet be resumed.
+ *
+ * This routine can run in atomic context.
+ */
+int usb_autopm_get_interface_async(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int status = 0;
+
+ if (intf->condition == USB_INTERFACE_UNBOUND)
+ status = -ENODEV;
+ else if (udev->autoresume_disabled)
+ status = -EPERM;
+ else if (++intf->pm_usage_cnt > 0 && udev->state == USB_STATE_SUSPENDED)
+ queue_work(ksuspend_usb_wq, &udev->autoresume);
+ dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+ __func__, status, intf->pm_usage_cnt);
+ return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);
+
+/**
* usb_autopm_set_interface - set a USB interface's autosuspend state
* @intf: the usb_interface whose state should be set
*
@@ -1563,6 +1646,9 @@ EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
void usb_autosuspend_work(struct work_struct *work)
{}
+void usb_autoresume_work(struct work_struct *work)
+{}
+
#endif /* CONFIG_USB_SUSPEND */
/**
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b19cbfc..95fb310 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1374,8 +1374,9 @@ static void usb_stop_pm(struct usb_device *udev)
usb_autosuspend_device(udev->parent);
usb_pm_unlock(udev);
- /* Stop any autosuspend requests already submitted */
- cancel_rearming_delayed_work(&udev->autosuspend);
+ /* Stop any autosuspend or autoresume requests already submitted */
+ cancel_delayed_work_sync(&udev->autosuspend);
+ cancel_work_sync(&udev->autoresume);
}
#else
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 400fa4c..44f2fc7 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -402,6 +402,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
+ INIT_WORK(&dev->autoresume, usb_autoresume_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 9a1a45a..b60ebb4d 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -45,6 +45,7 @@ extern int usb_suspend(struct device *dev, pm_message_t msg);
extern int usb_resume(struct device *dev);
extern void usb_autosuspend_work(struct work_struct *work);
+extern void usb_autoresume_work(struct work_struct *work);
extern int usb_port_suspend(struct usb_device *dev);
extern int usb_port_resume(struct usb_device *dev);
extern int usb_external_suspend_device(struct usb_device *udev,
diff --git a/include/linux/usb.h b/include/linux/usb.h
index f72aa51..859a88e 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -398,6 +398,7 @@ struct usb_tt;
* @urbnum: number of URBs submitted for the whole device
* @active_duration: total time device is not suspended
* @autosuspend: for delayed autosuspends
+ * @autoresume: for autoresumes requested while in_interrupt
* @pm_mutex: protects PM operations
* @last_busy: time of last use
* @autosuspend_delay: in jiffies
@@ -476,6 +477,7 @@ struct usb_device {
#ifdef CONFIG_PM
struct delayed_work autosuspend;
+ struct work_struct autoresume;
struct mutex pm_mutex;
unsigned long last_busy;
@@ -513,6 +515,8 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
extern int usb_autopm_set_interface(struct usb_interface *intf);
extern int usb_autopm_get_interface(struct usb_interface *intf);
extern void usb_autopm_put_interface(struct usb_interface *intf);
+extern int usb_autopm_get_interface_async(struct usb_interface *intf);
+extern void usb_autopm_put_interface_async(struct usb_interface *intf);
static inline void usb_autopm_enable(struct usb_interface *intf)
{
@@ -539,8 +543,13 @@ static inline int usb_autopm_set_interface(struct usb_interface *intf)
static inline int usb_autopm_get_interface(struct usb_interface *intf)
{ return 0; }
+static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
+{ return 0; }
+
static inline void usb_autopm_put_interface(struct usb_interface *intf)
{ }
+static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
+{ }
static inline void usb_autopm_enable(struct usb_interface *intf)
{ }
static inline void usb_autopm_disable(struct usb_interface *intf)
OpenPOWER on IntegriCloud