summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorChris Wilson <chris@chris-wilson.co.uk>2011-02-10 10:05:35 +0000
committerChris Wilson <chris@chris-wilson.co.uk>2011-02-11 09:20:51 +0000
commit8102e126c0827b5336065fd86d3d313b60fde23a (patch)
treeed08a21ae4229034468e3d8f6e6169e0310b01a7
parent1aad7ac0458f40e2d0365d488620084f3965f6e7 (diff)
downloadop-kernel-dev-8102e126c0827b5336065fd86d3d313b60fde23a.zip
op-kernel-dev-8102e126c0827b5336065fd86d3d313b60fde23a.tar.gz
drm/i915/tv: Use polling rather than interrupt-based hotplug
The documentation recommends that we should use a polling method for TV detection as this is more power efficient than the interrupt based mechanism (as the encoder can be completely switched off). A secondary effect is that leaving the hotplug enabled seems to be causing pipe underruns as reported by Hugh Dickins on his Crestline. Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [This is a candidate for stable, but needs minor porting to 2.6.37]
-rw-r--r--drivers/gpu/drm/i915/intel_tv.c43
1 files changed, 30 insertions, 13 deletions
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 93206e4..fe4a53a 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1234,7 +1234,8 @@ static const struct drm_display_mode reported_modes[] = {
* \return false if TV is disconnected.
*/
static int
-intel_tv_detect_type (struct intel_tv *intel_tv)
+intel_tv_detect_type (struct intel_tv *intel_tv,
+ struct drm_connector *connector)
{
struct drm_encoder *encoder = &intel_tv->base.base;
struct drm_device *dev = encoder->dev;
@@ -1245,11 +1246,13 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
int type;
/* Disable TV interrupts around load detect or we'll recurse */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
- i915_disable_pipestat(dev_priv, 0,
- PIPE_HOTPLUG_INTERRUPT_ENABLE |
- PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ i915_disable_pipestat(dev_priv, 0,
+ PIPE_HOTPLUG_INTERRUPT_ENABLE |
+ PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ }
save_tv_dac = tv_dac = I915_READ(TV_DAC);
save_tv_ctl = tv_ctl = I915_READ(TV_CTL);
@@ -1302,11 +1305,13 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
I915_WRITE(TV_CTL, save_tv_ctl);
/* Restore interrupt config */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
- i915_enable_pipestat(dev_priv, 0,
- PIPE_HOTPLUG_INTERRUPT_ENABLE |
- PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 0,
+ PIPE_HOTPLUG_INTERRUPT_ENABLE |
+ PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ }
return type;
}
@@ -1356,7 +1361,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V);
if (intel_tv->base.base.crtc && intel_tv->base.base.crtc->enabled) {
- type = intel_tv_detect_type(intel_tv);
+ type = intel_tv_detect_type(intel_tv, connector);
} else if (force) {
struct drm_crtc *crtc;
int dpms_mode;
@@ -1364,7 +1369,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
crtc = intel_get_load_detect_pipe(&intel_tv->base, connector,
&mode, &dpms_mode);
if (crtc) {
- type = intel_tv_detect_type(intel_tv);
+ type = intel_tv_detect_type(intel_tv, connector);
intel_release_load_detect_pipe(&intel_tv->base, connector,
dpms_mode);
} else
@@ -1658,6 +1663,18 @@ intel_tv_init(struct drm_device *dev)
intel_encoder = &intel_tv->base;
connector = &intel_connector->base;
+ /* The documentation, for the older chipsets at least, recommend
+ * using a polling method rather than hotplug detection for TVs.
+ * This is because in order to perform the hotplug detection, the PLLs
+ * for the TV must be kept alive increasing power drain and starving
+ * bandwidth from other encoders. Notably for instance, it causes
+ * pipe underruns on Crestline when this encoder is supposedly idle.
+ *
+ * More recent chipsets favour HDMI rather than integrated S-Video.
+ */
+ connector->polled =
+ DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
DRM_MODE_CONNECTOR_SVIDEO);
OpenPOWER on IntegriCloud