summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-07-24 17:23:51 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-08-03 09:04:11 +0200
commit90abdc3b973229bae98dd96649d9f7106cc177a4 (patch)
tree5c1a7a131b65560dd73b5103118d8c7631bd76a4
parent9a017a910346afd88ec2e065989903bf211a7d37 (diff)
downloadop-kernel-dev-90abdc3b973229bae98dd96649d9f7106cc177a4.zip
op-kernel-dev-90abdc3b973229bae98dd96649d9f7106cc177a4.tar.gz
pcmcia: do not use io_req_t when calling pcmcia_request_io()
Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-rw-r--r--Documentation/pcmcia/driver-changes.txt7
-rw-r--r--drivers/ata/pata_pcmcia.c29
-rw-r--r--drivers/bluetooth/bluecard_cs.c13
-rw-r--r--drivers/bluetooth/bt3c_cs.c18
-rw-r--r--drivers/bluetooth/btuart_cs.c18
-rw-r--r--drivers/bluetooth/dtl1_cs.c21
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c17
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c20
-rw-r--r--drivers/char/pcmcia/ipwireless/main.c10
-rw-r--r--drivers/char/pcmcia/synclink_cs.c21
-rw-r--r--drivers/ide/ide-cs.c30
-rw-r--r--drivers/isdn/hardware/avm/avm_cs.c15
-rw-r--r--drivers/isdn/hisax/avma1_cs.c20
-rw-r--r--drivers/isdn/hisax/elsa_cs.c15
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c28
-rw-r--r--drivers/isdn/hisax/teles_cs.c15
-rw-r--r--drivers/net/pcmcia/3c574_cs.c11
-rw-r--r--drivers/net/pcmcia/3c589_cs.c11
-rw-r--r--drivers/net/pcmcia/axnet_cs.c40
-rw-r--r--drivers/net/pcmcia/com20020_cs.c19
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c31
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c14
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c8
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c40
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c43
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c34
-rw-r--r--drivers/net/wireless/airo_cs.c22
-rw-r--r--drivers/net/wireless/atmel_cs.c22
-rw-r--r--drivers/net/wireless/b43/pcmcia.c4
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c28
-rw-r--r--drivers/net/wireless/libertas/if_cs.c8
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c24
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c24
-rw-r--r--drivers/net/wireless/ray_cs.c5
-rw-r--r--drivers/net/wireless/wl3501_cs.c12
-rw-r--r--drivers/parport/parport_cs.c16
-rw-r--r--drivers/pcmcia/pcmcia_resource.c37
-rw-r--r--drivers/scsi/pcmcia/aha152x_stub.c14
-rw-r--r--drivers/scsi/pcmcia/fdomain_stub.c10
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c30
-rw-r--r--drivers/scsi/pcmcia/qlogic_stub.c14
-rw-r--r--drivers/scsi/pcmcia/sym53c500_cs.c14
-rw-r--r--drivers/serial/serial_cs.c37
-rw-r--r--drivers/staging/comedi/drivers/cb_das16_cs.c24
-rw-r--r--drivers/staging/comedi/drivers/das08_cs.c23
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_700.c24
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_dio24.c24
-rw-r--r--drivers/staging/comedi/drivers/ni_labpc_cs.c24
-rw-r--r--drivers/staging/comedi/drivers/ni_mio_cs.c13
-rw-r--r--drivers/staging/comedi/drivers/quatech_daqp_cs.c24
-rw-r--r--drivers/staging/wlags49_h2/wl_cs.c8
-rw-r--r--drivers/telephony/ixj_pcmcia.c16
-rw-r--r--drivers/usb/host/sl811_cs.c12
-rw-r--r--include/pcmcia/cs.h17
-rw-r--r--include/pcmcia/ds.h21
-rw-r--r--sound/pcmcia/pdaudiocf/pdaudiocf.c6
-rw-r--r--sound/pcmcia/vx/vxpocket.c6
57 files changed, 527 insertions, 584 deletions
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index ff5f0be..26c0f9c 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,11 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_request_io changes (as of 2.6.36)
+ Instead of io_req_t, drivers are now requested to fill out
+ struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+ ranges. After a call to pcmcia_request_io(), the ports found there
+ are reserved, after calling pcmcia_request_configuration(), they may
+ be used.
+
* No dev_info_t, no cs_types.h (as of 2.6.36)
dev_info_t and a few other typedefs are removed. No longer use them
in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 1fcd065..e944aa0 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -200,21 +200,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ pdev->resource[0]->start = io->win[0].base;
+ if (!(io->flags & CISTPL_IO_16BIT)) {
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ }
if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = 8;
+ pdev->resource[1]->start = io->win[1].base;
+ pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = io->win[0].len;
+ pdev->resource[1]->end = 0;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[0]->start + 0x0e;
} else
@@ -245,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
struct ata_port_operations *ops = &pcmcia_port_ops;
/* Set up attributes in order to probe card and get resources */
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- pdev->io.IOAddrLines = 3;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 24d2007..d52e90a5 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -865,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
-
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -890,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link)
int i, n;
link->conf.ConfigIndex = 0x20;
- link->io.NumPorts1 = 64;
- link->io.IOAddrLines = 6;
+
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 64;
+ link->io_lines = 6;
for (n = 0; n < 0x400; n += 0x40) {
- link->io.BasePort1 = n ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = n ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 8ab494c..7ab8f29 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -657,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -683,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
{
unsigned long try = (unsigned long) priv_data;
+ p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = (try == 0) ? 16 :
- cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -707,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 7e770d4..1c4f5e8 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -586,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -612,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
{
int *try = priv_data;
+ p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = (*try == 0) ? 16 :
- cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -636,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index bfe9313..18ecc57 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
- return 0;
- }
- return -ENODEV;
+ if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
+ return -ENODEV;
+
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len; /*yo */
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev);
}
static int dtl1_config(struct pcmcia_device *link)
@@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link)
int i;
/* Look for a generic full-sized window */
- link->io.NumPorts1 = 8;
+ link->resource[0]->end = 8;
if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
goto failed;
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 18484ed..ec73d9f 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1751,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev,
if (!cfg->io.nwin)
return -ENODEV;
- /* Get the IOaddr */
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev);
}
static int cm4000_config(struct pcmcia_device * link, int devno)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index a6bbf19..815cde1 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -527,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Get the IOaddr */
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+ rc = pcmcia_request_io(p_dev);
+
dev_printk(KERN_INFO, &p_dev->dev,
"pcmcia_request_io returned 0x%x\n", rc);
return rc;
@@ -548,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
struct reader_dev *dev;
int fail_rc;
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
-
if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 9467994..5f87b9f 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -88,15 +88,15 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
memreq_t memreq_common_memory;
int ret;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.IOAddrLines = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* 0x40 causes it to generate level mode interrupts. */
/* 0x04 enables IREQ pin. */
p_dev->conf.ConfigIndex = cfg->index | 0x44;
- ret = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->io_lines = 16;
+ ret = pcmcia_request_io(p_dev);
if (ret)
return ret;
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 8ded9b0..9ecd6be 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -571,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- if (cfg->io.nwin > 0) {
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- return pcmcia_request_io(p_dev, &p_dev->io);
- }
- return -ENODEV;
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev);
}
static int mgslpc_config(struct pcmcia_device *link)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 6be0e5f..2a4cb9c 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -97,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 3;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -228,22 +227,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+
pdev->conf.ConfigIndex = cfg->index;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ pdev->resource[0]->start = io->win[0].base;
+ if (!(io->flags & CISTPL_IO_16BIT)) {
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ }
if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = 8;
+ pdev->resource[1]->start = io->win[1].base;
+ pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = io->win[0].len;
+ pdev->resource[1]->end = 0;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[0]->start + 0x0e;
} else
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 7c8c51f..09b1795 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -75,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
{
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -119,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len;
- p_dev->io.NumPorts2 = 0;
- printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
- p_dev->io.BasePort1,
- p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len;
+ return pcmcia_request_io(p_dev);
}
static int avmcs_config(struct pcmcia_device *link)
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8889963..94263c2 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -78,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts2 = 16;
- p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[1]->end = 16;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -126,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len;
- p_dev->io.NumPorts2 = 0;
- printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
- p_dev->io.BasePort1,
- p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len;
+ p_dev->io_lines = 5;
+ return pcmcia_request_io(p_dev);
}
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index c10bfd3..b3c08aa 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -126,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
- link->io.NumPorts1 = 8;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 3;
+ link->resource[0]->end = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -173,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
{
int j;
+ p_dev->io_lines = 3;
+
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
- p_dev->io.BasePort1 = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
for (j = 0x2f0; j > 0x100; j -= 0x10) {
- p_dev->io.BasePort1 = j;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = j;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index cecb35a..4755eb4 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -129,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
/* from old sedl_cs
*/
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 8;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 3;
+ link->resource[0]->end = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -201,23 +200,22 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ p_dev->io_lines = 3;
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 3787fc7..7296102 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -106,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link)
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
- link->io.NumPorts1 = 96;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 96;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -153,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
{
int j;
+ p_dev->io_lines = 5;
+
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
- p_dev->io.BasePort1 = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
} else {
printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
for (j = 0x2f0; j > 0x100; j -= 0x10) {
- p_dev->io.BasePort1 = j;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = j;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index b5ea9b8..c683f77 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->window_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "3c574_config()\n");
- link->io.IOAddrLines = 16;
+ link->io_lines = 16;
+
for (i = j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 122ef4a..61f9cf2 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link)
"3Com card??\n");
multi = (link->card_id == PRODID_3COM_3C562);
+ link->io_lines = 16;
+
/* For the 3c562, the base address must be xx00-xx7f */
- link->io.IOAddrLines = 16;
for (i = j = 0; j < 0x400; j += 0x10) {
if (multi && (j & 0x80)) continue;
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index c52fdf3..5f05ffb 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* for master/slave multifunction cards */
- if (link->io.NumPorts2 > 0)
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->end > 0)
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return -ENODEV;
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 3b53818..3c400cf 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts1 = 16;
- p_dev->io.IOAddrLines = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "com20020_config\n");
- dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int) link->resource[0]->start);
+
i = -ENODEV;
- if (!link->io.BasePort1)
+ link->io_lines = 16;
+
+ if (!link->resource[0]->start)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
- link->io.BasePort1 = ioaddr;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
}
else
- i = pcmcia_request_io(link, &link->io);
+ i = pcmcia_request_io(link);
if (i != 0)
{
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index bba6369..69930448 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
lp->base = NULL;
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link)
{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
for (i = 0; i < 5; i++) {
- link->io.BasePort2 = serial_base[i];
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- if (link->io.BasePort2 == 0) {
- link->io.NumPorts2 = 0;
+ link->resource[1]->start = serial_base[i];
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->start == 0) {
+ link->resource[1]->end = 0;
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
@@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
0x380,0x3c0 only for ioport.
*/
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
- link->io.BasePort1 = ioaddr;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ ret = pcmcia_request_io(link);
if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
@@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "fmvj18x_config\n");
+ link->io_lines = 5;
+
len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
kfree(buf);
@@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link)
/* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
}
break;
case MANFID_NEC:
cardtype = NEC; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_KME:
cardtype = KME; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_CONTEC:
cardtype = CONTEC;
@@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
}
- if (link->io.NumPorts2 != 0) {
+ if (link->resource[1]->end != 0) {
ret = mfc_try_io_port(link);
if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
if (ret != 0) goto failed;
} else {
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index e99abaa..3fd8595 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->priv = info;
info->ti = netdev_priv(dev);
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 4;
- link->io.IOAddrLines = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 4;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "ibmtr_config\n");
link->conf.ConfigIndex = 0x61;
+ link->io_lines = 16;
/* Determine if this is PRIMARY or ALTERNATE. */
/* Try PRIMARY card at 0xA20-0xA23 */
- link->io.BasePort1 = 0xA20;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA20;
+ i = pcmcia_request_io(link);
if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
- link->io.BasePort1 = 0xA24;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA24;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 9980cbb..68f2dee 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&lp->bank_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "nmclan_config\n");
- ret = pcmcia_request_io(link, &link->io);
+ link->io_lines = 5;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index c9cd237..9c5fc9d 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (link->io.NumPorts2 > 0) {
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ if (link->resource[1]->end > 0) {
/* for master/slave multifunction cards */
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
}
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
*has_shmem = ((cfg->mem.nwin == 1) &&
(cfg->mem.win[0].len >= 0x4000));
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return 0;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 1b0b3230..a5e4779 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&smc->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 4;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
int k;
- p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[0].base;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
continue;
- p_dev->io.BasePort1 = k ^ 0x300;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = k ^ 0x300;
+ p_dev->io_lines = 16;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.IOAddrLines = 16;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
@@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev);
}
static int smc_config(struct pcmcia_device *link)
@@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
int i;
- link->io.NumPorts1 = 16;
+ link->resource[0]->end = 16;
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
dev->base_addr = link->resource[0]->start;
@@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.NumPorts1 = 64;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
- link->io.IOAddrLines = 16;
+ link->resource[0]->end = 64;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* Enable Hard Decode, LAN, Modem */
link->conf.ConfigIndex = 0x23;
+ link->io_lines = 16;
for (i = j = 0; j < 4; j++) {
- link->io.BasePort2 = com[j];
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->start = com[j];
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
- link->io.NumPorts2 = 0;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->end = 0;
+ i = pcmcia_request_io(link);
}
dev->base_addr = link->resource[0]->start + 0x10;
return i;
@@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link)
}
/* Try setting bus width */
- width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+ width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
s = inb(ioaddr + CONFIG);
if (width)
s |= CFG_16BIT;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 034920b..8fb0eb1 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = ioaddr;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
int *pass = priv_data;
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = p_dev->io.BasePort2
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = p_dev->resource[1]->start
+ (*pass ? (cf->index & 0x20 ? -24:8)
: (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link)
goto failure;
}
- link->io.IOAddrLines =10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
if (local->modem) {
int pass;
@@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
- link->io.NumPorts2 = 8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+ link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->io.NumPorts1 = 18;
+ link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
@@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link)
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->io.NumPorts1 = 16;
+ link->io_lines = 10;
+ link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = ioaddr;
+ if (!(err = pcmcia_request_io(link)))
goto port_found;
}
- link->io.BasePort1 = 0; /* let CS decide */
- if ((err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = 0; /* let CS decide */
+ if ((err = pcmcia_request_io(link)))
goto config_error;
}
port_found:
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index b7e7f5054..d241b4a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
/*
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 65b3aed..3b63216 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int atmel_config(struct pcmcia_device *link)
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index f71bc78..7c9af82 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
- dev->io.BasePort2 = 0;
- dev->io.NumPorts2 = 0;
- dev->io.Attributes2 = 0;
-
win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 4e13ced..ba54d1b 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
"dflt->io.nwin=%d\n",
cfg->io.nwin, dflt->io.nwin);
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int prism2_config(struct pcmcia_device *link)
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index be4c475..9c29839 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int if_cs_probe(struct pcmcia_device *p_dev)
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 6d514b5..ef46a2d 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 4f8f55e..873877e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 165beb6..b83d5ef 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->finder = p_dev;
/* The io structure describes IO port mapping. None used here */
- p_dev->io.NumPorts1 = 0;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 0;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index a32f220..a1cc2d4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
struct wl3501_card *this;
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
/* Try allocating IO ports. This tries a few fixed addresses. If you
* want, you can also read the card's config table to pick addresses --
* see the serial driver for an example. */
+ link->io_lines = 5;
for (j = 0x280; j < 0x400; j += 0x20) {
/* The '^0x300' is so that we probe 0x300-0x3ff first, then
* 0x200-0x2ff, and so on, because this seems safer */
- link->io.BasePort1 = j;
- link->io.BasePort2 = link->io.BasePort1 + 0x10;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j;
+ link->resource[1]->start = link->resource[0]->start + 0x10;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index fc1639c..23e50f4 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -101,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link)
link->priv = info;
info->p_dev = link;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -143,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev,
{
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
if (epp_mode)
p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin == 2) {
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
return 0;
}
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index fcd48da..a48d4a9 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -70,7 +70,8 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res,
res->flags |= IORESOURCE_IO;
- dev_dbg(&s->dev, "alloc_io_space request for %pR\n", res);
+ dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n",
+ res, lines);
align = base ? (lines ? 1<<lines : 0) : 1;
if (align && (align < num)) {
@@ -541,38 +542,25 @@ EXPORT_SYMBOL(pcmcia_request_configuration);
* pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices
*
* pcmcia_request_io() attepts to reserve the IO port ranges specified in
- * struct pcmcia_device *p_dev->resource[0] and *p_dev->resource[1]. The
+ * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The
* "start" value is the requested start of the IO port resource; "end"
- * relfects the number of ports requested.
- *
- * If io_req_t is passed, those values are converted automatically.
+ * reflects the number of ports requested. The number of IO lines requested
+ * is specified in &struct pcmcia_device @p_dev->io_lines.
*/
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
+int pcmcia_request_io(struct pcmcia_device *p_dev)
{
struct pcmcia_socket *s = p_dev->socket;
- config_t *c;
+ config_t *c = p_dev->function_config;
int ret = -EINVAL;
- unsigned int lines = req->IOAddrLines;
mutex_lock(&s->ops_mutex);
+ dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
goto out;
}
- c = p_dev->function_config;
- if (req) {
- c->io[0].start = req->BasePort1;
- c->io[0].end = req->NumPorts1;
- c->io[0].flags |= req->Attributes1;
- c->io[1].start = req->BasePort2;
- c->io[1].end = req->NumPorts2;
- c->io[1].flags |= req->Attributes2;
- }
-
- dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
-
if (c->state & CONFIG_LOCKED) {
dev_dbg(&s->dev, "Configuration is locked\n");
goto out;
@@ -582,12 +570,12 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
goto out;
}
- ret = alloc_io_space(s, &c->io[0], lines);
+ ret = alloc_io_space(s, &c->io[0], p_dev->io_lines);
if (ret)
goto out;
if (c->io[1].end) {
- ret = alloc_io_space(s, &c->io[1], lines);
+ ret = alloc_io_space(s, &c->io[1], p_dev->io_lines);
if (ret) {
release_io_space(s, &c->io[0]);
goto out;
@@ -598,11 +586,6 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- if (!ret) {
- req->BasePort1 = c->io[0].start;
- req->BasePort2 = c->io[1].start;
- }
-
dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
&c->io[0], &c->io[1]);
out:
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 3e040f5..61f49bd 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 0x20;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 0x20;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
+ p_dev->io_lines = 10;
/* For New Media T&J, look for a SCSI window */
if (cfg->io.win[0].len >= 0x20)
- p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
else if ((cfg->io.nwin > 1) &&
(cfg->io.win[1].len >= 0x20))
- p_dev->io.BasePort1 = cfg->io.win[1].base;
+ p_dev->resource[0]->start = cfg->io.win[1].base;
if ((cfg->io.nwin > 0) &&
- (p_dev->io.BasePort1 < 0xffff)) {
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ (p_dev->resource[0]->start < 0xffff)) {
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -EINVAL;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 49a9a0a..13dbe5c 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 0x10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 0x10;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ return pcmcia_request_io(p_dev);
}
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index d929891..8bb598b 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link)
nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 0x10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10; /* not used */
+ link->resource[0]->end = 0x10;
+ link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags =
+ p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 4e2b83f..eb775f1 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
- if (p_dev->io.BasePort1 == 0)
+ if (p_dev->resource[0]->start == 0)
return -ENODEV;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int qlogic_config(struct pcmcia_device * link)
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index d99c0cb..321e390 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
- if (p_dev->io.BasePort1 == 0)
+ if (p_dev->resource[0]->start == 0)
return -ENODEV;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int
@@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index fe7adcd..141c695 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -335,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -424,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ p_dev->io_lines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
&& (cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -EINVAL;
@@ -446,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -521,9 +522,9 @@ static int multi_config_check(struct pcmcia_device *p_dev,
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
*base2 = p_dev->resource[0]->start + 8;
return 0;
}
@@ -540,10 +541,10 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
int *base2 = priv_data;
if (cf->io.nwin == 2) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.BasePort2 = cf->io.win[1].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[1].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
*base2 = p_dev->resource[1]->start;
return 0;
}
@@ -557,10 +558,10 @@ static int multi_config(struct pcmcia_device *link)
int i, base2 = 0;
/* First, look for a generic full-sized window */
- link->io.NumPorts1 = info->multi * 8;
+ link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
- link->io.NumPorts1 = link->io.NumPorts2 = 8;
+ link->resource[0]->end = link->resource[1]->end = 8;
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 208f1b7..7cf0ccb 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -736,24 +736,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
return 0;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index c4cfcff..9ee677f 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -224,24 +224,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
return 0;
}
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 6d56957..7e41ad9 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -571,24 +571,22 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 29e1daf..b2483f8 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -323,24 +323,22 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index fb10987..c1444b4 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -301,24 +301,22 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index f37dc22..d50b6c4 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -264,8 +264,8 @@ static const dev_info_t dev_info = "ni_mio_cs";
static int cs_attach(struct pcmcia_device *link)
{
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -310,13 +310,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
{
int base, ret;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
- p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
for (base = 0x000; base < 0x400; base += 0x20) {
- p_dev->io.BasePort1 = base;
- ret = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = base;
+ ret = pcmcia_request_io(p_dev);
if (!ret)
return 0;
}
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 80b8d57..25f4e67 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -1102,26 +1102,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static void daqp_cs_config(struct pcmcia_device *link)
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 23615378..f15afd2 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -145,9 +145,8 @@ static int wl_adapter_attach(struct pcmcia_device *link)
return -ENOMEM;
}
- link->io.NumPorts1 = HCF_NUM_IO_PORTS;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->io.IOAddrLines = 6;
+ link->resource[0]->end = HCF_NUM_IO_PORTS;
+ link->resource[0]->flags = IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
@@ -305,8 +304,9 @@ void wl_adapter_insert( struct pcmcia_device *link )
/* Do we need to allocate an interrupt? */
link->conf.Attributes |= CONF_ENABLE_IRQ;
+ link->io_lines = 6;
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret != 0)
goto failed;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index a801036..a1900e5 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -32,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev)
{
dev_dbg(&p_dev->dev, "ixj_attach()\n");
/* Create new ixj device */
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 3;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
if (!p_dev->priv) {
@@ -120,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev,
{
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
+ p_dev->io_lines = 3;
if (io->nwin == 2) {
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 22e04f2..0e13a00 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -162,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
pcmcia_disable_device(p_dev);
return -ENODEV;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 0cd8c70..ad71bb5 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -56,23 +56,6 @@ typedef struct config_req_t {
#define INT_CARDBUS 0x04
#define INT_ZOOMED_VIDEO 0x08
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
- u_int BasePort1;
- u_int NumPorts1;
- u_int Attributes1;
- u_int BasePort2;
- u_int NumPorts2;
- u_int Attributes2;
- u_int IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_DATA_PATH_WIDTH 0x18
-#define IO_DATA_PATH_WIDTH_8 0x00
-#define IO_DATA_PATH_WIDTH_16 0x08
-#define IO_DATA_PATH_WIDTH_AUTO 0x10
-
/* Bits in IRQInfo1 field */
#define IRQ_NMI_ID 0x01
#define IRQ_IOCK_ID 0x02
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 3dafd7d..0748bec 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -80,7 +80,6 @@ struct pcmcia_device {
struct list_head socket_device_list;
/* deprecated, will be cleaned up soon */
- io_req_t io;
config_req_t conf;
window_handle_t win;
@@ -88,6 +87,8 @@ struct pcmcia_device {
unsigned int irq;
struct resource *resource[MAX_IO_WIN];
+ unsigned int io_lines; /* number of I/O lines */
+
/* Is the device suspended? */
u16 suspended:1;
@@ -179,7 +180,7 @@ int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val);
int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val);
/* device configuration */
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
+int pcmcia_request_io(struct pcmcia_device *p_dev);
int __must_check
__pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
@@ -206,6 +207,22 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win,
int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
void pcmcia_disable_device(struct pcmcia_device *p_dev);
+/* IO ports */
+#define IO_DATA_PATH_WIDTH 0x18
+#define IO_DATA_PATH_WIDTH_8 0x00
+#define IO_DATA_PATH_WIDTH_16 0x08
+#define IO_DATA_PATH_WIDTH_AUTO 0x10
+
+/* convert flag found in cfgtable to data path width parameter */
+static inline int pcmcia_io_cfg_data_width(unsigned int flags)
+{
+ if (!(flags & CISTPL_IO_8BIT))
+ return IO_DATA_PATH_WIDTH_16;
+ if (!(flags & CISTPL_IO_16BIT))
+ return IO_DATA_PATH_WIDTH_8;
+ return IO_DATA_PATH_WIDTH_AUTO;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_DS_H */
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 9f897bc..7ab9174 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
pdacf->p_dev = link;
link->priv = pdacf;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link)
snd_printdd(KERN_DEBUG "pdacf_config called\n");
link->conf.ConfigIndex = 0x5;
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index f23c235..a6edfc3 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
vxp->p_dev = link;
link->priv = chip;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link)
strcpy(chip->card->driver, vxp440_hw.name);
}
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
OpenPOWER on IntegriCloud