[SCSI] remove PCI2000 and PCI2220i drivers

From: Christoph Hellwig <hch@lst.de>

Both drivers are marked broken and haven't compiled since very early
2.5.x.  And they're for IDE hardware so they shouldn't have been
written to the SCSI layer at all.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

7 files changed, 0 insertions, 4709 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 750b11c..2ef5aee 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1192,28 +1192,6 @@ config SCSI_PAS16
 	  To compile this driver as a module, choose M here: the
 	  module will be called pas16.
 
-config SCSI_PCI2000
-	tristate "PCI2000 support"
-	depends on PCI && SCSI && BROKEN
-	help
-	  This is support for the PCI2000I EIDE interface card which acts as a
-	  SCSI host adapter.  Please read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pci2000.
-
-config SCSI_PCI2220I
-	tristate "PCI2220i support"
-	depends on PCI && SCSI && BROKEN
-	help
-	  This is support for the PCI2220i EIDE interface card which acts as a
-	  SCSI host adapter.  Please read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pci2220i.
-
 config SCSI_PSI240I
 	tristate "PSI240i support"
 	depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 9cb9fe7..51d9c1e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -50,8 +50,6 @@ obj-$(CONFIG_MVME16x_SCSI)	+= mvme16x.o	53c7xx.o
 obj-$(CONFIG_BVME6000_SCSI)	+= bvme6000.o	53c7xx.o
 obj-$(CONFIG_SCSI_SIM710)	+= 53c700.o	sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
-obj-$(CONFIG_SCSI_PCI2000)	+= pci2000.o
-obj-$(CONFIG_SCSI_PCI2220I)	+= pci2220i.o
 obj-$(CONFIG_SCSI_PSI240I)	+= psi240i.o
 obj-$(CONFIG_SCSI_BUSLOGIC)	+= BusLogic.o
 obj-$(CONFIG_SCSI_DPT_I2O)	+= dpt_i2o.o
diff --git a/drivers/scsi/pci2000.c b/drivers/scsi/pci2000.c
deleted file mode 100644
index 377a466..0000000
--- a/drivers/scsi/pci2000.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.c - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- *
- *	Revisions	1.10	Jan-21-1999
- *		- Fixed sign on message to reflect proper controller name.
- *		- Added support for RAID status monitoring and control.
- *
- *  Revisions	1.11	Mar-22-1999
- *		- Fixed control timeout to not lock up the entire system if
- *		  controller goes offline completely.
- *
- *	Revisions 1.12		Mar-26-1999
- *		- Fixed spinlock and PCI configuration.
- *
- *	Revisions 1.20		Mar-27-2000
- *		- Added support for dynamic DMA
- *
- ****************************************************************************/
-#define PCI2000_VERSION		"1.20"
-
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/spinlock.h>
-
-#include <asm/dma.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "pci2000.h"
-#include "psi_roy.h"
-
-
-//#define DEBUG 1
-
-#ifdef DEBUG
-#define DEB(x) x
-#define STOP_HERE	{int st;for(st=0;st<100;st++){st=1;}}
-#else
-#define DEB(x)
-#define STOP_HERE
-#endif
-
-typedef struct
-	{
-	unsigned int	address;
-	unsigned int	length;
-	}	SCATGATH, *PSCATGATH;
-
-typedef struct
-	{
-	Scsi_Cmnd		*SCpnt;
-	PSCATGATH		 scatGath;
-	dma_addr_t		 scatGathDma;
-	UCHAR			*cdb;
-	dma_addr_t		 cdbDma; 
-	UCHAR			 tag;
-	}	DEV2000, *PDEV2000;
-
-typedef struct
-	{
-	ULONG			 basePort;
-	ULONG			 mb0;
-	ULONG			 mb1;
-	ULONG			 mb2;
-	ULONG			 mb3;
-	ULONG			 mb4;
-	ULONG			 cmd;
-	ULONG			 tag;
-	ULONG			 irqOwned;
-	struct pci_dev	*pdev;
-	DEV2000	 		 dev[MAX_BUS][MAX_UNITS];
-	}	ADAPTER2000, *PADAPTER2000;
-
-#define HOSTDATA(host) ((PADAPTER2000)&host->hostdata)
-#define consistentLen (MAX_BUS * MAX_UNITS * (16 * sizeof (SCATGATH) + MAX_COMMAND_SIZE))
-
-
-static struct	Scsi_Host 	   *PsiHost[MAXADAPTER] = {NULL,};  // One for each adapter
-static			int				NumAdapters = 0;
-/****************************************************************
- *	Name:			WaitReady	:LOCAL
- *
- *	Description:	Wait for controller ready.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE on not ready.
- *
- ****************************************************************/
-static int WaitReady (PADAPTER2000 padapter)
-	{
-	ULONG	z;
-
-	for ( z = 0;  z < (TIMEOUT_COMMAND * 4);  z++ )
-		{
-		if ( !inb_p (padapter->cmd) )
-			return FALSE;
-		udelay (250);
-		};								
-	return TRUE;
-	}
-/****************************************************************
- *	Name:			WaitReadyLong	:LOCAL
- *
- *	Description:	Wait for controller ready.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE on not ready.
- *
- ****************************************************************/
-static int WaitReadyLong (PADAPTER2000 padapter)
-	{
-	ULONG	z;
-
-	for ( z = 0;  z < (5000 * 4);  z++ )
-		{
-		if ( !inb_p (padapter->cmd) )
-			return FALSE;
-		udelay (250);
-		};								
-	return TRUE;
-	}
-/****************************************************************
- *	Name:	OpDone	:LOCAL
- *
- *	Description:	Clean up operation and issue done to caller.
- *
- *	Parameters:		SCpnt	- Pointer to SCSI command structure.
- *					status	- Caller status.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void OpDone (Scsi_Cmnd *SCpnt, ULONG status)
-	{
-	SCpnt->result = status;
-	SCpnt->scsi_done (SCpnt);
-	}
-/****************************************************************
- *	Name:	Command		:LOCAL
- *
- *	Description:	Issue queued command to the PCI-2000.
- *
- *	Parameters:		padapter - Pointer to adapter information structure.
- *					cmd		 - PCI-2000 command byte.
- *
- *	Returns:		Non-zero command tag if operation is accepted.
- *
- ****************************************************************/
-static UCHAR Command (PADAPTER2000 padapter, UCHAR cmd)
-	{
-	outb_p (cmd, padapter->cmd);
-	if ( WaitReady (padapter) )
-		return 0;
-
-	if ( inw_p (padapter->mb0) )
-		return 0;
-
-	return inb_p (padapter->mb1);
-	}
-/****************************************************************
- *	Name:	BuildSgList		:LOCAL
- *
- *	Description:	Build the scatter gather list for controller.
- *
- *	Parameters:		SCpnt	 - Pointer to SCSI command structure.
- *					padapter - Pointer to adapter information structure.
- *					pdev	 - Pointer to adapter device structure.
- *
- *	Returns:		Non-zero in not scatter gather.
- *
- ****************************************************************/
-static int BuildSgList (Scsi_Cmnd *SCpnt, PADAPTER2000 padapter, PDEV2000 pdev)
-	{
-	int					 z;
-	int					 zc;
-	struct scatterlist	*sg;
-
-	if ( SCpnt->use_sg )
-		{
-		sg = (struct scatterlist *)SCpnt->request_buffer;
-		zc = pci_map_sg (padapter->pdev, sg, SCpnt->use_sg, SCpnt->sc_data_direction);
-		for ( z = 0;  z < zc;  z++ )
-			{
-			pdev->scatGath[z].address = cpu_to_le32 (sg_dma_address (sg));
-			pdev->scatGath[z].length = cpu_to_le32 (sg_dma_len (sg++));
-			}
-		outl (pdev->scatGathDma, padapter->mb2);
-		outl ((zc << 24) | SCpnt->request_bufflen, padapter->mb3);
-		return FALSE;
-		}
-	if ( !SCpnt->request_bufflen)
-		{
-		outl (0, padapter->mb2);
-		outl (0, padapter->mb3);
-		return TRUE;
-		}
-	SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev,
-			SCpnt->request_buffer, SCpnt->request_bufflen,
-			SCpnt->sc_data_direction);
-	outl (SCpnt->SCp.have_data_in, padapter->mb2);
-	outl (SCpnt->request_bufflen, padapter->mb3);
-	return TRUE;
-	}
-/*********************************************************************
- *	Name:	PsiRaidCmd
- *
- *	Description:	Execute a simple command.
- *
- *	Parameters:		padapter - Pointer to adapter control structure.
- *					cmd		 - Roy command byte.
- *
- *	Returns:		Return error status.
- *
- ********************************************************************/
-static int PsiRaidCmd (PADAPTER2000 padapter, char cmd)
-	{
-	if ( WaitReady (padapter) )						// test for command register ready
-		return DID_TIME_OUT;
-	outb_p (cmd, padapter->cmd);					// issue command
-	if ( WaitReadyLong (padapter) )					// wait for adapter ready
-		return DID_TIME_OUT;
-	return DID_OK;
-	}
-/****************************************************************
- *	Name:	Irq_Handler	:LOCAL
- *
- *	Description:	Interrupt handler.
- *
- *	Parameters:		irq		- Hardware IRQ number.
- *					dev_id	-
- *					regs	-
- *
- *	Returns:		TRUE if drive is not ready in time.
- *
- ****************************************************************/
-static irqreturn_t Irq_Handler (int irq, void *dev_id, struct pt_regs *regs)
-	{
-	struct Scsi_Host   *shost = NULL;	// Pointer to host data block
-	PADAPTER2000		padapter;		// Pointer to adapter control structure
-	PDEV2000			pdev;
-	Scsi_Cmnd		   *SCpnt;
-	UCHAR				tag = 0;
-	UCHAR				tag0;
-	ULONG				error;
-	int					pun;
-	int					bus;
-	int					z;
-    unsigned long		flags;
-    int handled = 0;
-
-	DEB(printk ("\npci2000 received interrupt "));
-	for ( z = 0; z < NumAdapters;  z++ )										// scan for interrupt to process
-		{
-		if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) )
-			{
-			tag = inb_p (HOSTDATA(PsiHost[z])->tag);
-			if (  tag )
-				{
-				shost = PsiHost[z];
-				break;
-				}
-			}
-		}
-
-	if ( !shost )
-		{
-		DEB (printk ("\npci2000: not my interrupt"));
-		goto out;
-		}
-
-    handled = 1;
-	spin_lock_irqsave(shost->host_lock, flags);
-	padapter = HOSTDATA(shost);
-
-	tag0 = tag & 0x7F;															// mask off the error bit
-	for ( bus = 0;  bus < MAX_BUS;  bus++ )										// scan the busses
-    	{
-		for ( pun = 0;  pun < MAX_UNITS;  pun++ )								// scan the targets
-    		{
-			pdev = &padapter->dev[bus][pun];
-			if ( !pdev->tag )
-    			continue;
-			if ( pdev->tag == tag0 )											// is this it?
-				{
-				pdev->tag = 0;
-				SCpnt = pdev->SCpnt;
-				goto unmapProceed;
-    			}
-			}
-    	}
-
-	outb_p (0xFF, padapter->tag);												// clear the op interrupt
-	outb_p (CMD_DONE, padapter->cmd);											// complete the op
-	goto irq_return;															// done, but, with what?
-
-unmapProceed:;
-	if ( !bus )
-		{
-		switch ( SCpnt->cmnd[0] )
-			{
-			case SCSIOP_TEST_UNIT_READY:
-				pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE);
-				goto irqProceed;
-			case SCSIOP_READ_CAPACITY:
-				pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, 8, PCI_DMA_FROMDEVICE);
-				goto irqProceed;
-			case SCSIOP_VERIFY:
-			case SCSIOP_START_STOP_UNIT:
-			case SCSIOP_MEDIUM_REMOVAL:
-				goto irqProceed;
-			}
-		}
-	if ( SCpnt->SCp.have_data_in )
-		pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, SCpnt->request_bufflen, SCpnt->sc_data_direction);
-	else 
-		{
-		if ( SCpnt->use_sg )
-			pci_unmap_sg (padapter->pdev, (struct scatterlist *)SCpnt->request_buffer, SCpnt->use_sg, SCpnt->sc_data_direction);
-		}
-
-irqProceed:;
-	if ( tag & ERR08_TAGGED )												// is there an error here?
-		{
-		if ( WaitReady (padapter) )
-			{
-			OpDone (SCpnt, DID_TIME_OUT << 16);
-			goto irq_return;
-			}
-
-		outb_p (tag0, padapter->mb0);										// get real error code
-		outb_p (CMD_ERROR, padapter->cmd);
-		if ( WaitReady (padapter) )											// wait for controller to suck up the op
-			{
-			OpDone (SCpnt, DID_TIME_OUT << 16);
-			goto irq_return;
-			}
-
-		error = inl (padapter->mb0);										// get error data
-		outb_p (0xFF, padapter->tag);										// clear the op interrupt
-		outb_p (CMD_DONE, padapter->cmd);									// complete the op
-
-		DEB (printk ("status: %lX ", error));
-		if ( error == 0x00020002 )											// is this error a check condition?
-			{
-			if ( bus )														// are we doint SCSI commands?
-				{
-				OpDone (SCpnt, (DID_OK << 16) | 2);
-				goto irq_return;
-				}
-			if ( *SCpnt->cmnd == SCSIOP_TEST_UNIT_READY )
-				OpDone (SCpnt, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2);	// test caller we have sense data too
-			else
-				OpDone (SCpnt, DID_ERROR << 16);
-			goto irq_return;
-			}
-		OpDone (SCpnt, DID_ERROR << 16);
-		goto irq_return;
-		}
-
-	outb_p (0xFF, padapter->tag);											// clear the op interrupt
-	outb_p (CMD_DONE, padapter->cmd);										// complete the op
-	OpDone (SCpnt, DID_OK << 16);
-
-irq_return:
-    spin_unlock_irqrestore(shost->host_lock, flags);
-out:
-    return IRQ_RETVAL(handled);
-}
-/****************************************************************
- *	Name:	Pci2000_QueueCommand
- *
- *	Description:	Process a queued command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *					done  - Pointer to done function to call.
- *
- *	Returns:		Status code.
- *
- ****************************************************************/
-int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
-	{
-	UCHAR		   *cdb = (UCHAR *)SCpnt->cmnd;					// Pointer to SCSI CDB
-	PADAPTER2000	padapter = HOSTDATA(SCpnt->device->host);			// Pointer to adapter control structure
-	int				rc		 = -1;								// command return code
-	UCHAR			bus		 = SCpnt->device->channel;
-	UCHAR			pun		 = SCpnt->device->id;
-	UCHAR			lun		 = SCpnt->device->lun;
-	UCHAR			cmd;
-	PDEV2000		pdev	 = &padapter->dev[bus][pun];
-
-	if ( !done )
-		{
-		printk("pci2000_queuecommand: %02X: done can't be NULL\n", *cdb);
-		return 0;
-		}
-
-	SCpnt->scsi_done = done;
-	SCpnt->SCp.have_data_in = 0;
-	pdev->SCpnt = SCpnt;  									// Save this command data
-
-	if ( WaitReady (padapter) )
-		{
-		rc = DID_ERROR;
-		goto finished;
-		}
-
-	outw_p (pun | (lun << 8), padapter->mb0);
-
-	if ( bus )
-		{
-		DEB (if(*cdb) printk ("\nCDB: %X-  %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9]));
-		DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d", SCpnt->timeout_per_command,
-							  SCpnt->timeout_total, SCpnt->timeout));
-		outl (SCpnt->timeout_per_command, padapter->mb1);
-		outb_p (CMD_SCSI_TIMEOUT, padapter->cmd);
-		if ( WaitReady (padapter) )
-			{
-			rc = DID_ERROR;
-			goto finished;
-			}
-
-		outw_p (pun | (lun << 8), padapter->mb0);
-		outw_p (SCpnt->cmd_len << 8, padapter->mb0 + 2);
-		memcpy (pdev->cdb, cdb, MAX_COMMAND_SIZE);
-
-		outl (pdev->cdbDma, padapter->mb1);
-		if ( BuildSgList (SCpnt, padapter, pdev) )
-			cmd = CMD_SCSI_THRU;
-		else
-			cmd = CMD_SCSI_THRU_SG;
-		if ( (pdev->tag = Command (padapter, cmd)) == 0 )
-			rc = DID_TIME_OUT;
-		goto finished;
-		}
-	else
-		{
-		if ( lun )
-			{
-			rc = DID_BAD_TARGET;
-			goto finished;
-			}
-		}
-
-	switch ( *cdb )
-		{
-		case SCSIOP_INQUIRY:   					// inquiry CDB
-			if ( cdb[2] == SC_MY_RAID )
-				{
-				switch ( cdb[3] ) 
-					{
-					case MY_SCSI_REBUILD:
-						OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_REBUILD) << 16);
-						return 0;
-					case MY_SCSI_ALARMMUTE:
-						OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_MUTE) << 16);
-						return 0;
-					case MY_SCSI_DEMOFAIL:
-						OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_FAIL) << 16);
-						return 0;
-					default:
-						if ( SCpnt->use_sg )
-							{
-							rc = DID_ERROR;
-							goto finished;
-							}
-						else
-							{
-							SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, SCpnt->request_bufflen,
-													  SCpnt->sc_data_direction);
-							outl (SCpnt->SCp.have_data_in, padapter->mb2);
-							}
-						outl (cdb[5], padapter->mb0);
-						outl (cdb[3], padapter->mb3);
-						cmd = CMD_DASD_RAID_RQ;
-						break;
-					}
-				break;
-				}
-			
-			if ( SCpnt->use_sg )
-				{
-				SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev,
-									  ((struct scatterlist *)SCpnt->request_buffer)->address,
-									  SCpnt->request_bufflen,
-									  SCpnt->sc_data_direction);
-				}
-			else
-				{
-				SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer,
-									  SCpnt->request_bufflen,
-									  SCpnt->sc_data_direction);
-				}
-			outl (SCpnt->SCp.have_data_in, padapter->mb2);
-			outl (SCpnt->request_bufflen, padapter->mb3);
-			cmd = CMD_DASD_SCSI_INQ;
-			break;
-
-		case SCSIOP_TEST_UNIT_READY:			// test unit ready CDB
-			SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->sense_buffer, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE);
-			outl (SCpnt->SCp.have_data_in, padapter->mb2);
-			outl (sizeof (SCpnt->sense_buffer), padapter->mb3);
-			cmd = CMD_TEST_READY;
-			break;
-
-		case SCSIOP_READ_CAPACITY:			  	// read capacity CDB
-			if ( SCpnt->use_sg )
-				{
-				SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, ((struct scatterlist *)(SCpnt->request_buffer))->address,
-										  8, PCI_DMA_FROMDEVICE);
-				}
-			else
-				SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, 8, PCI_DMA_FROMDEVICE);
-			outl (SCpnt->SCp.have_data_in, padapter->mb2);
-			outl (8, padapter->mb3);
-			cmd = CMD_DASD_CAP;
-			break;
-		case SCSIOP_VERIFY:						// verify CDB
-			outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2);
-			outl (XSCSI2LONG (&cdb[2]), padapter->mb1);
-			cmd = CMD_READ_SG;
-			break;
-		case SCSIOP_READ:						// read10 CDB
-			outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2);
-			outl (XSCSI2LONG (&cdb[2]), padapter->mb1);
-			if ( BuildSgList (SCpnt, padapter, pdev) )
-				cmd = CMD_READ;
-			else
-				cmd = CMD_READ_SG;
-			break;
-		case SCSIOP_READ6:						// read6  CDB
-			outw_p (cdb[4], padapter->mb0 + 2);
-			outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1);
-			if ( BuildSgList (SCpnt, padapter, pdev) )
-				cmd = CMD_READ;
-			else
-				cmd = CMD_READ_SG;
-			break;
-		case SCSIOP_WRITE:						// write10 CDB
-			outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2);
-			outl (XSCSI2LONG (&cdb[2]), padapter->mb1);
-			if ( BuildSgList (SCpnt, padapter, pdev) )
-				cmd = CMD_WRITE;
-			else
-				cmd = CMD_WRITE_SG;
-			break;
-		case SCSIOP_WRITE6:						// write6  CDB
-			outw_p (cdb[4], padapter->mb0 + 2);
-			outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1);
-			if ( BuildSgList (SCpnt, padapter, pdev) )
-				cmd = CMD_WRITE;
-			else
-				cmd = CMD_WRITE_SG;
-			break;
-		case SCSIOP_START_STOP_UNIT:
-			cmd = CMD_EJECT_MEDIA;
-			break;
-		case SCSIOP_MEDIUM_REMOVAL:
-			switch ( cdb[4] )
-				{
-				case 0:
-					cmd = CMD_UNLOCK_DOOR;
-					break;
-				case 1:
-					cmd = CMD_LOCK_DOOR;
-					break;
-				default:
-					cmd = 0;
-					break;
-				}
-			if ( cmd )
-				break;
-		default:
-			DEB (printk ("pci2000_queuecommand: Unsupported command %02X\n", *cdb));
-			OpDone (SCpnt, DID_ERROR << 16);
-			return 0;
-		}
-
-	if ( (pdev->tag = Command (padapter, cmd)) == 0 )
-		rc = DID_TIME_OUT;
-finished:;
-	if ( rc != -1 )
-		OpDone (SCpnt, rc << 16);
-	return 0;
-	}
-/****************************************************************
- *	Name:	Pci2000_Detect
- *
- *	Description:	Detect and initialize our boards.
- *
- *	Parameters:		tpnt - Pointer to SCSI host template structure.
- *
- *	Returns:		Number of adapters installed.
- *
- ****************************************************************/
-int Pci2000_Detect (Scsi_Host_Template *tpnt)
-	{
-	int					found = 0;
-	int					installed = 0;
-	struct Scsi_Host   *pshost;
-	PADAPTER2000	    padapter;
-	int					z, zz;
-	int					setirq;
-	struct pci_dev	   *pdev = NULL;
-	UCHAR			   *consistent;
-	dma_addr_t			consistentDma;
-
-	while ( (pdev = pci_find_device (VENDOR_PSI, DEVICE_ROY_1, pdev)) != NULL )
-		{
-		if (pci_enable_device(pdev))
-			continue;
-		pshost = scsi_register (tpnt, sizeof(ADAPTER2000));
-		if(pshost == NULL)
-			continue;
-		padapter = HOSTDATA(pshost);
-
-		padapter->basePort = pci_resource_start (pdev, 1);
-		DEB (printk ("\nBase Regs = %#04X", padapter->basePort));			// get the base I/O port address
-		padapter->mb0	= padapter->basePort + RTR_MAILBOX;		   			// get the 32 bit mail boxes
-		padapter->mb1	= padapter->basePort + RTR_MAILBOX + 4;
-		padapter->mb2	= padapter->basePort + RTR_MAILBOX + 8;
-		padapter->mb3	= padapter->basePort + RTR_MAILBOX + 12;
-		padapter->mb4	= padapter->basePort + RTR_MAILBOX + 16;
-		padapter->cmd	= padapter->basePort + RTR_LOCAL_DOORBELL;			// command register
-		padapter->tag	= padapter->basePort + RTR_PCI_DOORBELL;			// tag/response register
-		padapter->pdev = pdev;
-
-		if ( WaitReady (padapter) )
-			goto unregister;
-		outb_p (0x84, padapter->mb0);
-		outb_p (CMD_SPECIFY, padapter->cmd);
-		if ( WaitReady (padapter) )
-			goto unregister;
-
-		consistent = pci_alloc_consistent (pdev, consistentLen, &consistentDma);
-		if ( !consistent )
-			{
-			printk ("Unable to allocate DMA memory for PCI-2000 controller.\n");
-			goto unregister;
-			}
-		
-		scsi_set_device(pshost, &pdev->dev);
-		pshost->irq = pdev->irq;
-		setirq = 1;
-		padapter->irqOwned = 0;
-		for ( z = 0;  z < installed;  z++ )									// scan for shared interrupts
-			{
-			if ( PsiHost[z]->irq == pshost->irq )							// if shared then, don't posses
-				setirq = 0;
-			}
-		if ( setirq )												// if not shared, posses
-			{
-			if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2000", padapter) < 0 )
-				{
-				if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2000", padapter) < 0 )
-					{
-					printk ("Unable to allocate IRQ for PCI-2000 controller.\n");
-					pci_free_consistent (pdev, consistentLen, consistent, consistentDma);
-					goto unregister;
-					}
-				}
-			padapter->irqOwned = pshost->irq;						// set IRQ as owned
-			}
-		PsiHost[installed]	= pshost;										// save SCSI_HOST pointer
-
-		pshost->io_port		= padapter->basePort;
-		pshost->n_io_port	= 0xFF;
-		pshost->unique_id	= padapter->basePort;
-		pshost->max_id		= 16;
-		pshost->max_channel	= 1;
-
-		for ( zz = 0;  zz < MAX_BUS;  zz++ )
-			for ( z = 0; z < MAX_UNITS;  z++ )
-				{
-				padapter->dev[zz][z].tag = 0;
-				padapter->dev[zz][z].scatGath = (PSCATGATH)consistent;
-				padapter->dev[zz][z].scatGathDma = consistentDma;
-				consistent += 16 * sizeof (SCATGATH);
-				consistentDma += 16 * sizeof (SCATGATH);
-				padapter->dev[zz][z].cdb = (UCHAR *)consistent;
-				padapter->dev[zz][z].cdbDma = consistentDma;
-				consistent += MAX_COMMAND_SIZE;
-				consistentDma += MAX_COMMAND_SIZE;
-				}
-			
-		printk("\nPSI-2000 Intelligent Storage SCSI CONTROLLER: at I/O = %lX  IRQ = %d\n", padapter->basePort, pshost->irq);
-		printk("Version %s, Compiled %s %s\n\n", PCI2000_VERSION,  __DATE__, __TIME__);
-		found++;
-		if ( ++installed < MAXADAPTER )
-			continue;
-		break;
-unregister:;
-		scsi_unregister (pshost);
-		found++;
-		}
-	NumAdapters = installed;
-	return installed;
-	}
-/****************************************************************
- *	Name:	Pci2000_Abort
- *
- *	Description:	Process the Abort command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *
- *	Returns:		Allways snooze.
- *
- ****************************************************************/
-int Pci2000_Abort (Scsi_Cmnd *SCpnt)
-	{
-	DEB (printk ("pci2000_abort\n"));
-	return SCSI_ABORT_SNOOZE;
-	}
-/****************************************************************
- *	Name:	Pci2000_Reset
- *
- *	Description:	Process the Reset command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *					flags - Flags about the reset command
- *
- *	Returns:		No active command at this time, so this means
- *					that each time we got some kind of response the
- *					last time through.  Tell the mid-level code to
- *					request sense information in order to decide what
- *					to do next.
- *
- ****************************************************************/
-int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags)
-	{
-	return SCSI_RESET_PUNT;
-	}
-/****************************************************************
- *	Name:	Pci2000_Release
- *
- *	Description:	Release resources allocated for a single each adapter.
- *
- *	Parameters:		pshost - Pointer to SCSI command structure.
- *
- *	Returns:		zero.
- *
- ****************************************************************/
-int Pci2000_Release (struct Scsi_Host *pshost)
-	{
-    PADAPTER2000	padapter = HOSTDATA (pshost);
-
-	if ( padapter->irqOwned )
-		free_irq (pshost->irq, padapter);
-	pci_free_consistent (padapter->pdev, consistentLen, padapter->dev[0][0].scatGath, padapter->dev[0][0].scatGathDma);
-	release_region (pshost->io_port, pshost->n_io_port);
-    scsi_unregister(pshost);
-    return 0;
-	}
-
-/****************************************************************
- *	Name:	Pci2000_BiosParam
- *
- *	Description:	Process the biosparam request from the SCSI manager to
- *					return C/H/S data.
- *
- *	Parameters:		disk - Pointer to SCSI disk structure.
- *					dev	 - Major/minor number from kernel.
- *					geom - Pointer to integer array to place geometry data.
- *
- *	Returns:		zero.
- *
- ****************************************************************/
-int Pci2000_BiosParam (struct scsi_device *sdev, struct block_device *dev,
-		sector_t capacity, int geom[])
-	{
-	PADAPTER2000	    padapter;
-
-	padapter = HOSTDATA(sdev->host);
-
-	if ( WaitReady (padapter) )
-		return 0;
-	outb_p (sdev->id, padapter->mb0);
-	outb_p (CMD_GET_PARMS, padapter->cmd);
-	if ( WaitReady (padapter) )
-		return 0;
-
-	geom[0] = inb_p (padapter->mb2 + 3);
-	geom[1] = inb_p (padapter->mb2 + 2);
-	geom[2] = inw_p (padapter->mb2);
-	return 0;
-	}
-
-
-MODULE_LICENSE("Dual BSD/GPL");
-
-static Scsi_Host_Template driver_template = {
-	.proc_name	= "pci2000",
-	.name		= "PCI-2000 SCSI Intelligent Disk Controller",
-	.detect		= Pci2000_Detect,
-	.release	= Pci2000_Release,
-	.queuecommand	= Pci2000_QueueCommand,
-	.abort		= Pci2000_Abort,
-	.reset		= Pci2000_Reset,
-	.bios_param	= Pci2000_BiosParam,
-	.can_queue	= 16,
-	.this_id	= -1,
-	.sg_tablesize	= 16,
-	.cmd_per_lun	= 1,
-	.use_clustering	= DISABLE_CLUSTERING,
-};
-#include "scsi_module.c"
diff --git a/drivers/scsi/pci2220i.c b/drivers/scsi/pci2220i.c
deleted file mode 100644
index e395e42..0000000
--- a/drivers/scsi/pci2220i.c
+++ /dev/null
@@ -1,2915 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2220I device driver for Linux.
- *
- * pci2220i.c - Linux Host Driver for PCI-2220I EIDE RAID Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- *
- *	Revisions 1.10		Mar-26-1999
- *		- Updated driver for RAID and hot reconstruct support.
- *
- *	Revisions 1.11		Mar-26-1999
- *		- Fixed spinlock and PCI configuration.
- *
- *	Revision 2.00		December-1-1999
- *		- Added code for the PCI-2240I controller
- *		- Added code for ATAPI devices.
- *		- Double buffer for scatter/gather support
- *
- *	Revision 2.10		March-27-2000
- *		- Added support for dynamic DMA
- *
- ****************************************************************************/
-
-#error Convert me to understand page+offset based scatterlists
-
-//#define DEBUG 1
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/blkdev.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-
-#include <asm/dma.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "pci2220i.h"
-#include "psi_dale.h"
-
-
-#define	PCI2220I_VERSION		"2.10"
-#define	READ_CMD				IDE_CMD_READ_MULTIPLE
-#define	WRITE_CMD				IDE_CMD_WRITE_MULTIPLE
-#define	MAX_BUS_MASTER_BLOCKS	SECTORSXFER		// This is the maximum we can bus master
-
-#ifdef DEBUG
-#define DEB(x) x
-#define STOP_HERE()	{int st;for(st=0;st<100;st++){st=1;}}
-#else
-#define DEB(x)
-#define STOP_HERE()
-#endif
-
-#define MAXADAPTER 4					// Increase this and the sizes of the arrays below, if you need more.
-
-
-typedef struct
-	{
-	UCHAR			byte6;				// device select register image
-	UCHAR			spigot;				// spigot number
-	UCHAR			spigots[2];			// RAID spigots
-	UCHAR			deviceID[2];		// device ID codes
-	USHORT			sectors;			// number of sectors per track
-	USHORT			heads;				// number of heads
-	USHORT			cylinders;			// number of cylinders for this device
-	USHORT			spareword;			// placeholder
-	ULONG			blocks;				// number of blocks on device
-	DISK_MIRROR		DiskMirror[2];		// RAID status and control
-	ULONG			lastsectorlba[2];	// last addressable sector on the drive
-	USHORT			raid;				// RAID active flag
-	USHORT			mirrorRecon;
-	UCHAR			reconOn;
-	USHORT			reconCount;
-	USHORT			reconIsStarting;	// indicate hot reconstruct is starting
-	UCHAR			cmdDrqInt;			// flag for command interrupt
-	UCHAR			packet;				// command packet size in bytes
-	}	OUR_DEVICE, *POUR_DEVICE;	
-
-typedef struct
-	{
-	USHORT		 bigD;					// identity is a PCI-2240I if true, otherwise a PCI-2220I
-	USHORT		 atapi;					// this interface is for ATAPI devices only
-	ULONG		 regDmaDesc;			// address of the DMA discriptor register for direction of transfer
-	ULONG		 regDmaCmdStat;			// Byte #1 of DMA command status register
-	ULONG		 regDmaAddrPci;			// 32 bit register for PCI address of DMA
-	ULONG		 regDmaAddrLoc;			// 32 bit register for local bus address of DMA
-	ULONG		 regDmaCount;			// 32 bit register for DMA transfer count
-	ULONG		 regDmaMode;			// 32 bit register for DMA mode control
-	ULONG		 regRemap;				// 32 bit local space remap
-	ULONG		 regDesc;				// 32 bit local region descriptor
-	ULONG		 regRange;				// 32 bit local range
-	ULONG		 regIrqControl;			// 16 bit Interrupt enable/disable and status
-	ULONG		 regScratchPad;			// scratch pad I/O base address
-	ULONG		 regBase;				// Base I/O register for data space
-	ULONG		 regData;				// data register I/O address
-	ULONG		 regError;				// error register I/O address
-	ULONG		 regSectCount;			// sector count register I/O address
-	ULONG		 regLba0;				// least significant byte of LBA
-	ULONG		 regLba8;				// next least significant byte of LBA
-	ULONG		 regLba16;				// next most significan byte of LBA
-	ULONG		 regLba24;				// head and most 4 significant bits of LBA
-	ULONG		 regStatCmd;			// status on read and command on write register
-	ULONG		 regStatSel;			// board status on read and spigot select on write register
-	ULONG		 regFail;				// fail bits control register
-	ULONG		 regAltStat;			// alternate status and drive control register
-	ULONG		 basePort;				// PLX base I/O port
-	USHORT		 timingMode;			// timing mode currently set for adapter
-	USHORT		 timingPIO;				// TRUE if PIO timing is active
-	struct pci_dev	*pcidev;
-	ULONG		 timingAddress;			// address to use on adapter for current timing mode
-	ULONG		 irqOwned;				// owned IRQ or zero if shared
-	UCHAR		 numberOfDrives;		// saved number of drives on this controller
-	UCHAR		 failRegister;			// current inverted data in fail register
-	OUR_DEVICE	 device[BIGD_MAXDRIVES];
-	DISK_MIRROR	*raidData[BIGD_MAXDRIVES];
-	ULONG		 startSector;
-	USHORT		 sectorCount;
-	ULONG		 readCount;
-	UCHAR		*currentSgBuffer;
-	ULONG		 currentSgCount;
-	USHORT		 nextSg;
-	UCHAR		 cmd;
-	Scsi_Cmnd	*SCpnt;
-	POUR_DEVICE	 pdev;					// current device opearating on
-	USHORT		 devInReconIndex;
-	USHORT		 expectingIRQ;
-	USHORT		 reconOn;				// Hot reconstruct is to be done.
-	USHORT		 reconPhase;			// Hot reconstruct operation is in progress.
-	ULONG		 reconSize;
-	USHORT		 demoFail;				// flag for RAID failure demonstration
-	USHORT		 survivor;
-	USHORT		 failinprog;
-	struct timer_list	reconTimer;	
-	struct timer_list	timer;
-	UCHAR		*kBuffer;
-	dma_addr_t	 kBufferDma;
-	UCHAR		 reqSense;
-	UCHAR		 atapiCdb[16];
-	UCHAR		 atapiSpecial;
-	}	ADAPTER2220I, *PADAPTER2220I;
-
-#define HOSTDATA(host) ((PADAPTER2220I)&host->hostdata)
-
-#define	RECON_PHASE_READY		0x01
-#define	RECON_PHASE_COPY		0x02
-#define	RECON_PHASE_UPDATE		0x03
-#define	RECON_PHASE_LAST		0x04
-#define	RECON_PHASE_END			0x07	
-#define	RECON_PHASE_MARKING		0x80
-#define	RECON_PHASE_FAILOVER	0xFF
-
-static struct	Scsi_Host 	   *PsiHost[MAXADAPTER] = {NULL,};  // One for each adapter
-static			int				NumAdapters = 0;
-static			int				Installed = 0;
-static			SETUP			DaleSetup;
-static			DISK_MIRROR		DiskMirror[BIGD_MAXDRIVES];
-static			ULONG			ModeArray[] = {DALE_DATA_MODE2, DALE_DATA_MODE3, DALE_DATA_MODE4, DALE_DATA_MODE5};
-static			ULONG			ModeArray2[] = {BIGD_DATA_MODE2, BIGD_DATA_MODE3, BIGD_DATA_MODE4, BIGD_DATA_MODE5};
-
-static void ReconTimerExpiry (unsigned long data);
-
-/*******************************************************************************************************
- *	Name:			Alarm
- *
- *	Description:	Sound the for the given device
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					device	 - Device number.
- *	
- *	Returns:		Nothing.
- *
- ******************************************************************************************************/
-static void Alarm (PADAPTER2220I padapter, UCHAR device)
-	{
-	UCHAR	zc;
-
-	if ( padapter->bigD )
-		{
-		zc = device | (FAIL_ANY | FAIL_AUDIBLE);
-		if ( padapter->failRegister & FAIL_ANY ) 
-			zc |= FAIL_MULTIPLE;
-		
-		padapter->failRegister = zc;
-		outb_p (~zc, padapter->regFail);
-		}
-	else
-		outb_p (0x3C | (1 << device), padapter->regFail);			// sound alarm and set fail light		
-	}
-/****************************************************************
- *	Name:	MuteAlarm	:LOCAL
- *
- *	Description:	Mute the audible alarm.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static void MuteAlarm (PADAPTER2220I padapter)
-	{
-	UCHAR	old;
-
-	if ( padapter->bigD )
-		{
-		padapter->failRegister &= ~FAIL_AUDIBLE;
-		outb_p (~padapter->failRegister, padapter->regFail);
-		}
-	else
-		{
-		old = (inb_p (padapter->regStatSel) >> 3) | (inb_p (padapter->regStatSel) & 0x83);
-		outb_p (old | 0x40, padapter->regFail);
-		}
-	}
-/****************************************************************
- *	Name:	WaitReady	:LOCAL
- *
- *	Description:	Wait for device ready.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int WaitReady (PADAPTER2220I padapter)
-	{
-	ULONG	z;
-	UCHAR	status;
-
-	for ( z = 0;  z < (TIMEOUT_READY * 4);  z++ )
-		{
-		status = inb_p (padapter->regStatCmd);
-		if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY )
-			return 0;
-		udelay (250);
-		}
-	return status;
-	}
-/****************************************************************
- *	Name:	WaitReadyReset	:LOCAL
- *
- *	Description:	Wait for device ready.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int WaitReadyReset (PADAPTER2220I padapter)
-	{
-	ULONG	z;
-	UCHAR	status;
-
-	for ( z = 0;  z < (125 * 16);  z++ )				// wait up to 1/4 second
-		{
-		status = inb_p (padapter->regStatCmd);
-		if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY )
-			{
-			DEB (printk ("\nPCI2220I:  Reset took %ld mSec to be ready", z / 8));
-			return 0;
-			}
-		udelay (125);
-		}
-	DEB (printk ("\nPCI2220I:  Reset took more than 2 Seconds to come ready, Disk Failure"));
-	return status;
-	}
-/****************************************************************
- *	Name:	WaitDrq	:LOCAL
- *
- *	Description:	Wait for device ready for data transfer.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int WaitDrq (PADAPTER2220I padapter)
-	{
-	ULONG	z;
-	UCHAR	status;
-
-	for ( z = 0;  z < (TIMEOUT_DRQ * 4);  z++ )
-		{
-		status = inb_p (padapter->regStatCmd);
-		if ( status & IDE_STATUS_DRQ )
-			return 0;
-		udelay (250);
-		}
-	return status;
-	}
-/****************************************************************
- *	Name:	AtapiWaitReady	:LOCAL
- *
- *	Description:	Wait for device busy and DRQ to be cleared.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					msec	 - Number of milliseconds to wait.
- *
- *	Returns:		TRUE if drive does not clear busy in time.
- *
- ****************************************************************/
-static int AtapiWaitReady (PADAPTER2220I padapter, int msec)
-	{
-	int z;
-
-	for ( z = 0;  z < (msec * 16);  z++ )
-		{
-		if ( !(inb_p (padapter->regStatCmd) & (IDE_STATUS_BUSY | IDE_STATUS_DRQ)) )
-			return FALSE;
-		udelay (125);
-		}
-	return TRUE;
-	}
-/****************************************************************
- *	Name:	AtapiWaitDrq	:LOCAL
- *
- *	Description:	Wait for device ready for data transfer.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					msec	 - Number of milliseconds to wait.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int AtapiWaitDrq (PADAPTER2220I padapter, int msec)
-	{
-	ULONG	z;
-
-	for ( z = 0;  z < (msec * 16);  z++ )
-		{
-		if ( inb_p (padapter->regStatCmd) & IDE_STATUS_DRQ )
-			return 0;
-		udelay (128);
-		}
-	return TRUE;
-	}
-/****************************************************************
- *	Name:	HardReset	:LOCAL
- *
- *	Description:	Wait for device ready for data transfer.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *					spigot	 - Spigot number.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int HardReset (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot)
-	{
-	DEB (printk ("\npci2220i:RESET  spigot = %X  devices = %d, %d", spigot, pdev->deviceID[0], pdev->deviceID[1]));
-	mdelay (100);										// just wait 100 mSec to let drives flush	
-	SelectSpigot (padapter, spigot | SEL_IRQ_OFF);
-	
-	outb_p (0x0E, padapter->regAltStat);					// reset the suvivor
-	udelay (100);											// wait a little	
-	outb_p (0x08, padapter->regAltStat);					// clear the reset
-	udelay (100);
-
-	outb_p (0xA0, padapter->regLba24);						// select the master drive
-	if ( WaitReadyReset (padapter) )
-		{
-		DEB (printk ("\npci2220i: master not ready after reset"));
-		return TRUE;
-		}
-	outb_p (0xB0, padapter->regLba24);						// try the slave drive
-	if ( (inb_p (padapter->regStatCmd) & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY ) 
-		{
-		DEB (printk ("\nPCI2220I: initializing slave drive on spigot %X", spigot));
-		outb_p (SECTORSXFER, padapter->regSectCount);
-		WriteCommand (padapter, IDE_CMD_SET_MULTIPLE);	
-		if ( WaitReady (padapter) )
-			{
-			DEB (printk ("\npci2220i: slave not ready after set multiple"));
-			return TRUE;
-			}
-		}
-	
-	outb_p (0xA0, padapter->regLba24);				// select the drive
-	outb_p (SECTORSXFER, padapter->regSectCount);
-	WriteCommand (padapter, IDE_CMD_SET_MULTIPLE);	
-	if ( WaitReady (padapter) )
-		{
-		DEB (printk ("\npci2220i: master not ready after set multiple"));
-		return TRUE;
-		}
-	return FALSE;
-	}
-/****************************************************************
- *	Name:	AtapiReset	:LOCAL
- *
- *	Description:	Wait for device ready for data transfer.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *
- *	Returns:		TRUE if drive does not come ready.
- *
- ****************************************************************/
-static int AtapiReset (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	SelectSpigot (padapter, pdev->spigot);
-	AtapiDevice (padapter, pdev->byte6);
-	AtapiCountLo (padapter, 0);
-	AtapiCountHi (padapter, 0);
-	WriteCommand (padapter, IDE_COMMAND_ATAPI_RESET);
-	udelay (125);
-	if ( AtapiWaitReady (padapter, 1000) )
-		return TRUE;
-	if ( inb_p (padapter->regStatCmd) || (inb_p (padapter->regLba8) != 0x14) || (inb_p (padapter->regLba16) != 0xEB) )
-		return TRUE;
-	return FALSE;
-	}
-/****************************************************************
- *	Name:	WalkScatGath	:LOCAL
- *
- *	Description:	Transfer data to/from scatter/gather buffers.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					datain   - TRUE if data read.
- *					length   - Number of bytes to transfer.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void WalkScatGath (PADAPTER2220I padapter, UCHAR datain, ULONG length)
-	{
-	ULONG	 count;
-	UCHAR	*buffer = padapter->kBuffer;
-
-	while ( length )
-		{
-		count = ( length > padapter->currentSgCount ) ? padapter->currentSgCount : length; 
-		
-		if ( datain )
-			memcpy (padapter->currentSgBuffer, buffer, count);
-		else
-			memcpy (buffer, padapter->currentSgBuffer, count);
-
-		padapter->currentSgCount -= count;
-		if ( !padapter->currentSgCount )
-			{
-			if ( padapter->nextSg < padapter->SCpnt->use_sg )
-				{
-				padapter->currentSgBuffer = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].address;
-				padapter->currentSgCount = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].length;
-				padapter->nextSg++;
-				}
-			}
-		else
-			padapter->currentSgBuffer += count;
-
-		length -= count;
-		buffer += count;
-		}
-	}
-/****************************************************************
- *	Name:	BusMaster	:LOCAL
- *
- *	Description:	Do a bus master I/O.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					datain	 - TRUE if data read.
- *					irq		 - TRUE if bus master interrupt expected.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void BusMaster (PADAPTER2220I padapter, UCHAR datain, UCHAR irq)
-	{
-	ULONG zl;
-	
-	zl = ( padapter->sectorCount > MAX_BUS_MASTER_BLOCKS ) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
-	padapter->sectorCount -= zl;
-	zl *= (ULONG)BYTES_PER_SECTOR;
-
-	if ( datain )
-		{
-		padapter->readCount = zl;
-		outb_p (8, padapter->regDmaDesc);							// read operation
-		if ( padapter->bigD )
-			{
-			if ( irq && !padapter->sectorCount )
-				outb_p (0x0C, padapter->regDmaMode);				// interrupt on
-			else
-				outb_p (0x08, padapter->regDmaMode);				// no interrupt
-			}
-		else 
-			{
-			if ( irq && !padapter->sectorCount )
-				outb_p (0x05, padapter->regDmaMode);				// interrupt on
-			else
-				outb_p (0x01, padapter->regDmaMode);				// no interrupt
-			}
-		}
-	else
-		{
-		outb_p (0x00, padapter->regDmaDesc);						// write operation
-		if ( padapter->bigD )
-			outb_p (0x08, padapter->regDmaMode);					// no interrupt						
-		else
-			outb_p (0x01, padapter->regDmaMode);					// no interrupt
-		WalkScatGath (padapter, FALSE, zl);	
-		}
-	
-	outl (padapter->timingAddress, padapter->regDmaAddrLoc);
-	outl (padapter->kBufferDma, padapter->regDmaAddrPci);
-	outl (zl, padapter->regDmaCount);
-	outb_p (0x03, padapter->regDmaCmdStat);							// kick the DMA engine in gear
-	}
-/****************************************************************
- *	Name:	AtapiBusMaster	:LOCAL
- *
- *	Description:	Do a bus master I/O.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					datain	 - TRUE if data read.
- *					length	 - Number of bytes to transfer.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void AtapiBusMaster (PADAPTER2220I padapter, UCHAR datain, ULONG length)
-	{
-	outl (padapter->timingAddress, padapter->regDmaAddrLoc);
-	outl (padapter->kBufferDma, padapter->regDmaAddrPci);
-	outl (length, padapter->regDmaCount);
-	if ( datain )
-		{
-		if ( padapter->readCount )
-				WalkScatGath (padapter, TRUE, padapter->readCount);
-		outb_p (0x08, padapter->regDmaDesc);						// read operation
-		outb_p (0x08, padapter->regDmaMode);						// no interrupt
-		padapter->readCount = length;
-		}
-	else
-		{
-		outb_p (0x00, padapter->regDmaDesc);						// write operation
-		outb_p (0x08, padapter->regDmaMode);						// no interrupt						
-		if ( !padapter->atapiSpecial )
-			WalkScatGath (padapter, FALSE, length);	
-		}
-	outb_p (0x03, padapter->regDmaCmdStat);							// kick the DMA engine in gear
-	}
-/****************************************************************
- *	Name:	WriteData	:LOCAL
- *
- *	Description:	Write data to device.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *
- *	Returns:		TRUE if drive does not assert DRQ in time.
- *
- ****************************************************************/
-static int WriteData (PADAPTER2220I padapter)
-	{
-	ULONG	zl;
-	
-	if ( !WaitDrq (padapter) )
-		{
-		if ( padapter->timingPIO )
-			{
-			zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
-			WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR);
-			outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2));
-			padapter->sectorCount -= zl;
-			}
-		else
-			BusMaster (padapter, 0, 0);
-		return 0;
-		}
-	padapter->cmd = 0;												// null out the command byte
-	return 1;
-	}
-/****************************************************************
- *	Name:	WriteDataBoth	:LOCAL
- *
- *	Description:	Write data to device.
- *
- *	Parameters:		padapter - Pointer to adapter structure.
- *					pdev	 - Pointer to device structure
- *
- *	Returns:		Index + 1 of drive not failed or zero for OK.
- *
- ****************************************************************/
-static int WriteDataBoth (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	ULONG	zl;
-	UCHAR	status0, status1;
-
-	SelectSpigot (padapter, pdev->spigots[0]);
-	status0 = WaitDrq (padapter);
-	if ( !status0 )
-		{
-		SelectSpigot (padapter, pdev->spigots[1]);
-		status1 = WaitDrq (padapter);
-		if ( !status1 )
-			{
-			SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD);
-			if ( padapter->timingPIO )
-				{
-				zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
-				WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR);
-				outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2));
-				padapter->sectorCount -= zl;
-				}
-			else
-				BusMaster (padapter, 0, 0);
-			return 0;
-			}
-		}
-	padapter->cmd = 0;												// null out the command byte
-	if ( status0 )
-		return 2;
-	return 1;
-	}
-/****************************************************************
- *	Name:	IdeCmd	:LOCAL
- *
- *	Description:	Process an IDE command.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *
- *	Returns:		Zero if no error or status register contents on error.
- *
- ****************************************************************/
-static UCHAR IdeCmd (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	UCHAR	status;
-
-	SelectSpigot (padapter, pdev->spigot | padapter->bigD);							// select the spigot
-	outb_p (pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24);			// select the drive
-	status = WaitReady (padapter);
-	if ( !status )
-		{
-		outb_p (padapter->sectorCount, padapter->regSectCount);
-		outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0);
-		outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8);
-		outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16);
-		padapter->expectingIRQ = TRUE;
-		WriteCommand (padapter, padapter->cmd);
-		return 0;
-		}
-
-	padapter->cmd = 0;									// null out the command byte
-	return status;
-	}
-/****************************************************************
- *	Name:	IdeCmdBoth	:LOCAL
- *
- *	Description:	Process an IDE command to both drivers.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device structure
- *
- *	Returns:		Index + 1 of drive not failed or zero for OK.
- *
- ****************************************************************/
-static UCHAR IdeCmdBoth (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	UCHAR	status0;
-	UCHAR	status1;
-
-	SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]);								// select the spigots
-	outb_p (padapter->pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24);// select the drive
-	SelectSpigot (padapter, pdev->spigots[0]);
-	status0 = WaitReady (padapter);
-	if ( !status0 )
-		{
-		SelectSpigot (padapter, pdev->spigots[1]);
-		status1 = WaitReady (padapter);
-		if ( !status1 )
-			{
-			SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD);
-			outb_p (padapter->sectorCount, padapter->regSectCount);
-			outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0);
-			outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8);
-			outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16);
-			padapter->expectingIRQ = TRUE;
-			WriteCommand (padapter, padapter->cmd);
-			return 0;
-			}
-		}
-	padapter->cmd = 0;									// null out the command byte
-	if ( status0 )
-		return 2;
-	return 1;
-	}
-/****************************************************************
- *	Name:	OpDone	:LOCAL
- *
- *	Description:	Complete an operatoin done sequence.
- *
- *	Parameters:		padapter - Pointer to host data block.
- *					spigot	 - Spigot select code.
- *					device	 - Device byte code.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void OpDone (PADAPTER2220I padapter, ULONG result)
-	{
-	Scsi_Cmnd	   *SCpnt = padapter->SCpnt;
-	
-	if ( padapter->reconPhase )
-		{
-		padapter->reconPhase = 0;
-		if ( padapter->SCpnt )
-			{
-			Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done);
-			}
-		else
-			{
-			if ( padapter->reconOn )
-				{
-				ReconTimerExpiry ((unsigned long)padapter);
-				}
-			}
-		}
-	else
-		{
-		padapter->cmd = 0;
-		padapter->SCpnt = NULL;	
-		padapter->pdev = NULL;
-		SCpnt->result = result;
-		SCpnt->scsi_done (SCpnt);
-		if ( padapter->reconOn && !padapter->reconTimer.data )
-			{
-			padapter->reconTimer.expires = jiffies + (HZ / 4);	// start in 1/4 second
-			padapter->reconTimer.data = (unsigned long)padapter;
-			add_timer (&padapter->reconTimer);
-			}
-		}
-	}
-/****************************************************************
- *	Name:	InlineIdentify	:LOCAL
- *
- *	Description:	Do an intline inquiry on a drive.
- *
- *	Parameters:		padapter - Pointer to host data block.
- *					spigot	 - Spigot select code.
- *					device	 - Device byte code.
- *
- *	Returns:		Last addressable sector or zero if none.
- *
- ****************************************************************/
-static ULONG InlineIdentify (PADAPTER2220I padapter, UCHAR spigot, UCHAR device)
-	{
-	PIDENTIFY_DATA	pid = (PIDENTIFY_DATA)padapter->kBuffer;
-
-	SelectSpigot (padapter, spigot | SEL_IRQ_OFF);					// select the spigot
-	outb_p ((device << 4) | 0xA0, padapter->regLba24);				// select the drive
-	if ( WaitReady (padapter) )
-		return 0;
-	WriteCommand (padapter, IDE_COMMAND_IDENTIFY);	
-	if ( WaitDrq (padapter) )
-		return 0;
-	insw (padapter->regData, padapter->kBuffer, sizeof (IDENTIFY_DATA) >> 1);
-	return (pid->LBATotalSectors - 1);
-	}
-/****************************************************************
- *	Name:	AtapiIdentify	:LOCAL
- *
- *	Description:	Do an intline inquiry on a drive.
- *
- *	Parameters:		padapter - Pointer to host data block.
- *					pdev	 - Pointer to device table.
- *
- *	Returns:		TRUE on error.
- *
- ****************************************************************/
-static ULONG AtapiIdentify (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	ATAPI_GENERAL_0		ag0;
-	USHORT				zs;
-	int					z;
-
-	AtapiDevice (padapter, pdev->byte6);	
-	WriteCommand (padapter, IDE_COMMAND_ATAPI_IDENTIFY);	
-	if ( AtapiWaitDrq (padapter, 3000) )
-		return TRUE;
-
-	*(USHORT *)&ag0 = inw_p (padapter->regData);
-	for ( z = 0;  z < 255;  z++ )
-		zs = inw_p (padapter->regData);
-
-	if ( ag0.ProtocolType == 2 )
-		{
-		if ( ag0.CmdDrqType == 1 )
-			pdev->cmdDrqInt = TRUE;
-		switch ( ag0.CmdPacketSize )
-			{
-			case 0:
-				pdev->packet = 6;
-				break;
-			case 1:
-				pdev->packet = 8;
-				break;
-			default:
-				pdev->packet = 6;
-				break;
-			}
-		return FALSE;
-		}
-	return TRUE;
-	}
-/****************************************************************
- *	Name:	Atapi2Scsi
- *
- *	Description:	Convert ATAPI data to SCSI data.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					SCpnt	 - Pointer to SCSI command structure.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-void Atapi2Scsi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt)
-	{
-	UCHAR	*buff = padapter->currentSgBuffer;
- 
-	switch ( SCpnt->cmnd[0] )
-		{
-		case SCSIOP_MODE_SENSE:
-			buff[0] = padapter->kBuffer[1];
-			buff[1] = padapter->kBuffer[2];
-			buff[2] = padapter->kBuffer[3];
-			buff[3] = padapter->kBuffer[7];
-			memcpy (&buff[4], &padapter->kBuffer[8], padapter->atapiCdb[8] - 8);
-			break;
-		case SCSIOP_INQUIRY:
-			padapter->kBuffer[2] = 2;
-			memcpy (buff, padapter->kBuffer, padapter->currentSgCount);
-			break;		
-		default:
-			if ( padapter->readCount )
-				WalkScatGath (padapter, TRUE, padapter->readCount);
-			break;
-		}
-	}
-/****************************************************************
- *	Name:	Scsi2Atapi
- *
- *	Description:	Convert SCSI packet command to Atapi packet command.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					SCpnt	 - Pointer to SCSI command structure.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void Scsi2Atapi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt)
-	{
-	UCHAR	*cdb = SCpnt->cmnd;
-	UCHAR	*buff = padapter->currentSgBuffer;
-
-	switch (cdb[0]) 
-		{
-		case SCSIOP_READ6:
-            padapter->atapiCdb[0] = SCSIOP_READ;
-			padapter->atapiCdb[1] = cdb[1] & 0xE0;
-            padapter->atapiCdb[3] = cdb[1] & 0x1F;
-			padapter->atapiCdb[4] = cdb[2];
-			padapter->atapiCdb[5] = cdb[3];
-			padapter->atapiCdb[8] = cdb[4];
-			padapter->atapiCdb[9] = cdb[5];
-			break;
-		case SCSIOP_WRITE6:
-            padapter->atapiCdb[0] = SCSIOP_WRITE;
-			padapter->atapiCdb[1] = cdb[1] & 0xE0;
-            padapter->atapiCdb[3] = cdb[1] & 0x1F;
-			padapter->atapiCdb[4] = cdb[2];
-			padapter->atapiCdb[5] = cdb[3];
-			padapter->atapiCdb[8] = cdb[4];
-			padapter->atapiCdb[9] = cdb[5];
-			break;
-        case SCSIOP_MODE_SENSE: 
-            padapter->atapiCdb[0] = SCSIOP_MODE_SENSE10;
-			padapter->atapiCdb[2] = cdb[2];
-			padapter->atapiCdb[8] = cdb[4] + 4;
-            break;
-
-        case SCSIOP_MODE_SELECT: 
-			padapter->atapiSpecial = TRUE;
-			padapter->atapiCdb[0] = SCSIOP_MODE_SELECT10;
-			padapter->atapiCdb[1] = cdb[1] | 0x10;
-			memcpy (padapter->kBuffer, buff, 4);
-			padapter->kBuffer[4] = padapter->kBuffer[5] = 0;
-			padapter->kBuffer[6] = padapter->kBuffer[7] = 0;
-			memcpy (&padapter->kBuffer[8], &buff[4], cdb[4] - 4);
-			padapter->atapiCdb[8] = cdb[4] + 4;
-			break;
-	    }
-	}
-/****************************************************************
- *	Name:	AtapiSendCdb
- *
- *	Description:	Send the CDB packet to the device.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *					cdb		 - Pointer to 16 byte SCSI cdb.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void AtapiSendCdb (PADAPTER2220I padapter, POUR_DEVICE pdev, CHAR *cdb)
-	{
-	DEB (printk ("\nPCI2242I: CDB: %X %X %X %X %X %X %X %X %X %X %X %X", cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9], cdb[10], cdb[11]));
-	outsw (padapter->regData, cdb, pdev->packet);
-	}
-/****************************************************************
- *	Name:	AtapiRequestSense
- *
- *	Description:	Send the CDB packet to the device.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *					SCpnt	 - Pointer to SCSI command structure.
- *					pass	 - If true then this is the second pass to send cdb.
- *
- *	Returns:		TRUE on error.
- *
- ****************************************************************/
-static int AtapiRequestSense (PADAPTER2220I padapter, POUR_DEVICE pdev, Scsi_Cmnd *SCpnt, UCHAR pass)
-	{
-	UCHAR	cdb[16] = {SCSIOP_REQUEST_SENSE,0,0,0,16,0,0,0,0,0,0,0,0,0,0,0};		
-	
-	DEB (printk ("\nPCI2242I: AUTO REQUEST SENSE"));
-	cdb[4] = (UCHAR)(sizeof (SCpnt->sense_buffer));
-	if ( !pass )
-		{
-		padapter->reqSense = TRUE;
-	 	AtapiCountLo (padapter, cdb[4]);						
-		AtapiCountHi (padapter, 0);						
-		outb_p (0, padapter->regError);						
-		WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET);
-		if ( pdev->cmdDrqInt )
-			return FALSE;
-
-		if ( AtapiWaitDrq (padapter, 500) )
-			return TRUE;
-		}
-	AtapiSendCdb (padapter, pdev, cdb);	
-	return FALSE;
-	}
-/****************************************************************
- *	Name:	InlineReadSignature	:LOCAL
- *
- *	Description:	Do an inline read RAID sigature.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to device.
- *					index	 - index of data to read.
- *
- *	Returns:		Zero if no error or status register contents on error.
- *
- ****************************************************************/
-static UCHAR InlineReadSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, int index)
-	{
-	UCHAR	status;
-	ULONG	zl = pdev->lastsectorlba[index];
-
-	SelectSpigot (padapter, pdev->spigots[index] | SEL_IRQ_OFF);	// select the spigot without interrupts
-	outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24);		
-	status = WaitReady (padapter);
-	if ( !status )
-		{
-		outb_p (((UCHAR *)&zl)[2], padapter->regLba16);
-		outb_p (((UCHAR *)&zl)[1], padapter->regLba8); 
-		outb_p (((UCHAR *)&zl)[0], padapter->regLba0);
-		outb_p (1, padapter->regSectCount);
-		WriteCommand (padapter, IDE_COMMAND_READ);
-		status = WaitDrq (padapter);
-		if ( !status )
-			{
-			insw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2);
-			((ULONG *)(&pdev->DiskMirror[index]))[0] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0];
-			((ULONG *)(&pdev->DiskMirror[index]))[1] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1];
-			// some drives assert DRQ before IRQ so let's make sure we clear the IRQ
-			WaitReady (padapter);
-			return 0;			
-			}
-		}
-	return status;
-	}
-/****************************************************************
- *	Name:	DecodeError	:LOCAL
- *
- *	Description:	Decode and process device errors.
- *
- *	Parameters:		padapter - Pointer to adapter data.
- *					status - Status register code.
- *
- *	Returns:		The driver status code.
- *
- ****************************************************************/
-static ULONG DecodeError (PADAPTER2220I	padapter, UCHAR status)
-	{
-	UCHAR			error;
-
-	padapter->expectingIRQ = 0;
-	if ( status & IDE_STATUS_WRITE_FAULT )
-		{
-		return DID_PARITY << 16;
-		}
-	if ( status & IDE_STATUS_BUSY )
-		return DID_BUS_BUSY << 16;
-
-	error = inb_p (padapter->regError);
-	DEB(printk ("\npci2220i error register: %x", error));
-	switch ( error )
-		{
-		case IDE_ERROR_AMNF:
-		case IDE_ERROR_TKONF:
-		case IDE_ERROR_ABRT:
-		case IDE_ERROR_IDFN:
-		case IDE_ERROR_UNC:
-		case IDE_ERROR_BBK:
-		default:
-			return DID_ERROR << 16;
-		}
-	return DID_ERROR << 16;
-	}
-/****************************************************************
- *	Name:	StartTimer	:LOCAL
- *
- *	Description:	Start the timer.
- *
- *	Parameters:		ipadapter - Pointer adapter data structure.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void StartTimer (PADAPTER2220I padapter)
-	{
-	padapter->timer.expires = jiffies + TIMEOUT_DATA;
-	add_timer (&padapter->timer);
-	}
-/****************************************************************
- *	Name:	WriteSignature	:LOCAL
- *
- *	Description:	Start the timer.
- *
- *	Parameters:		padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to our device.
- *					spigot	 - Selected spigot.
- *					index	 - index of mirror signature on device.
- *
- *	Returns:		TRUE on any error.
- *
- ****************************************************************/
-static int WriteSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot, int index)
-	{
-	ULONG	zl;
-
-	SelectSpigot (padapter, spigot);
-	zl = pdev->lastsectorlba[index];
-	outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24);		
-	outb_p (((UCHAR *)&zl)[2], padapter->regLba16);
-	outb_p (((UCHAR *)&zl)[1], padapter->regLba8);
-	outb_p (((UCHAR *)&zl)[0], padapter->regLba0);
-	outb_p (1, padapter->regSectCount);
-
-	WriteCommand (padapter, IDE_COMMAND_WRITE);	
-	if ( WaitDrq (padapter) )
-		return TRUE;
-	StartTimer (padapter);	
-	padapter->expectingIRQ = TRUE;
-	
-	((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0] = ((ULONG *)(&pdev->DiskMirror[index]))[0];
-	((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1] = ((ULONG *)(&pdev->DiskMirror[index]))[1];
-	outsw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2);
-	return FALSE;
-	}
-/*******************************************************************************************************
- *	Name:			InitFailover
- *
- *	Description:	This is the beginning of the failover routine
- *
- *	Parameters:		SCpnt	 - Pointer to SCSI command structure.
- *					padapter - Pointer adapter data structure.
- *					pdev	 - Pointer to our device.
- *	
- *	Returns:		TRUE on error.
- *
- ******************************************************************************************************/
-static int InitFailover (PADAPTER2220I padapter, POUR_DEVICE pdev)
-	{
-	UCHAR	spigot;
-	
-	DEB (printk ("\npci2220i:  Initialize failover process - survivor = %d", pdev->deviceID[padapter->survivor]));
-	pdev->raid = FALSE;									//initializes system for non raid mode
-	pdev->reconOn = FALSE;
-	spigot = pdev->spigots[padapter->survivor];	
-
-	if ( pdev->DiskMirror[padapter->survivor].status & UCBF_REBUILD )
-		{
-		DEB (printk ("\n         failed, is survivor"));
-		return (TRUE); 
-		}
-
-	if ( HardReset (padapter, pdev, spigot) )
-		{
-		DEB (printk ("\n         failed, reset"));
-		return TRUE;
-		}
-
-	Alarm (padapter, pdev->deviceID[padapter->survivor ^ 1]);
-	pdev->DiskMirror[padapter->survivor].status = UCBF_MIRRORED | UCBF_SURVIVOR;	//clear present status
-	
-	if ( WriteSignature (padapter, pdev, spigot, padapter->survivor) )
-		{
-		DEB (printk ("\n         failed, write signature"));
-		return TRUE;
-		}
-	padapter->failinprog = TRUE;
-	return FALSE;
-	}
-/****************************************************************
- *	Name:	TimerExpiry	:LOCAL
- *
- *	Description:	Timer expiry routine.
- *
- *	Parameters:		data - Pointer adapter data structure.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void TimerExpiry (unsigned long data)
-	{
-	PADAPTER2220I	padapter = (PADAPTER2220I)data;
-	struct Scsi_Host *host = padapter->SCpnt->device->host;
-	POUR_DEVICE		pdev = padapter->pdev;
-	UCHAR			status = IDE_STATUS_BUSY;
-	UCHAR			temp, temp1;
-    unsigned long		flags;
-
-    /*
-     * Disable interrupts, if they aren't already disabled and acquire
-     * the I/O spinlock.
-     */
-    spin_lock_irqsave (host->host_lock, flags);
-	DEB (printk ("\nPCI2220I: Timeout expired "));
-
-	if ( padapter->failinprog )
-		{
-		DEB (printk ("in failover process"));
-		OpDone (padapter, DecodeError (padapter, inb_p (padapter->regStatCmd)));
-		goto timerExpiryDone;
-		}
-	
-	while ( padapter->reconPhase )
-		{
-		DEB (printk ("in recon phase %X", padapter->reconPhase));
-		switch ( padapter->reconPhase )
-			{
-			case RECON_PHASE_MARKING:
-			case RECON_PHASE_LAST:
-				padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
-				DEB (printk ("\npci2220i: FAILURE 1"));
-				if ( InitFailover (padapter, pdev) )
-					OpDone (padapter, DID_ERROR << 16);
-				goto timerExpiryDone;
-			
-			case RECON_PHASE_READY:
-				OpDone (padapter, DID_ERROR << 16);
-				goto timerExpiryDone;
-
-			case RECON_PHASE_COPY:
-				padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-				DEB (printk ("\npci2220i: FAILURE 2"));
-				DEB (printk ("\n       spig/stat = %X", inb_p (padapter->regStatSel));
-				if ( InitFailover (padapter, pdev) )
-					OpDone (padapter, DID_ERROR << 16);
-				goto timerExpiryDone;
-
-			case RECON_PHASE_UPDATE:
-				padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-				DEB (printk ("\npci2220i: FAILURE 3")));
-				if ( InitFailover (padapter, pdev) )
-					OpDone (padapter, DID_ERROR << 16);
-				goto timerExpiryDone;
-
-			case RECON_PHASE_END:
-				padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-				DEB (printk ("\npci2220i: FAILURE 4"));
-				if ( InitFailover (padapter, pdev) )
-					OpDone (padapter, DID_ERROR << 16);
-				goto timerExpiryDone;
-			
-			default:
-				goto timerExpiryDone;
-			}
-		}
-	
-	while ( padapter->cmd )
-		{
-		outb_p (0x08, padapter->regDmaCmdStat);					// cancel interrupt from DMA engine
-		if ( pdev->raid )
-			{
-			if ( padapter->cmd == WRITE_CMD )
-				{
-				DEB (printk ("in RAID write operation"));
-				temp = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_1 : SEL_3;
-				if ( inb_p (padapter->regStatSel) & temp )
-					{
-					DEB (printk ("\npci2220i: Determined A OK"));
-					SelectSpigot (padapter, temp | SEL_IRQ_OFF); // Masking the interrupt during spigot select
-					temp = inb_p (padapter->regStatCmd);
-					}
-				else
-					temp = IDE_STATUS_BUSY;
-
-				temp1 = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_2 : SEL_4;
-				if ( inb (padapter->regStatSel) & temp1 )
-					{
-					DEB (printk ("\npci2220i: Determined B OK"));
-					SelectSpigot (padapter, temp1 | SEL_IRQ_OFF); // Masking the interrupt during spigot select
-					temp1 = inb_p (padapter->regStatCmd);
-					}
-				else
-					temp1 = IDE_STATUS_BUSY;
-			
-				if ( (temp & IDE_STATUS_BUSY) || (temp1 & IDE_STATUS_BUSY) )
-					{
-					DEB (printk ("\npci2220i: Status A: %X   B: %X", temp & 0xFF, temp1 & 0xFF));
-	 				if ( (temp & IDE_STATUS_BUSY) && (temp1 & IDE_STATUS_BUSY) ) 
-						{
-						status = temp;
-						break;
-						}		
-					else	
-						{
-						if ( temp & IDE_STATUS_BUSY )
-							padapter->survivor = 1;
-						else
-							padapter->survivor = 0;
-						if ( InitFailover (padapter, pdev) )
-							{
-							status = inb_p (padapter->regStatCmd);
-							break;
-							}
-						goto timerExpiryDone;
-						}
-					}
-				}
-			else
-				{
-				DEB (printk ("in RAID read operation"));
-				padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-				DEB (printk ("\npci2220i: FAILURE 6"));
-				if ( InitFailover (padapter, pdev) )
-					{
-					status = inb_p (padapter->regStatCmd);
-					break;
-					}
-				goto timerExpiryDone;
-				}
-			}
-		else
-			{
-			DEB (printk ("in I/O operation"));
-			status = inb_p (padapter->regStatCmd);
-			}
-		break;
-		}
-	
-	OpDone (padapter, DecodeError (padapter, status));
-
-timerExpiryDone:;
-    /*
-     * Release the I/O spinlock and restore the original flags
-     * which will enable interrupts if and only if they were
-     * enabled on entry.
-     */
-    spin_unlock_irqrestore (host->host_lock, flags);
-	}
-/****************************************************************
- *	Name:			SetReconstruct	:LOCAL
- *
- *	Description:	Set the reconstruct up.
- *
- *	Parameters:		pdev	- Pointer to device structure.
- *					index	- Mirror index number.
- *
- *	Returns:		Number of sectors on new disk required.
- *
- ****************************************************************/
-static LONG SetReconstruct (POUR_DEVICE pdev, int index)
-	{
-	pdev->DiskMirror[index].status = UCBF_MIRRORED;							// setup the flags
-	pdev->DiskMirror[index ^ 1].status = UCBF_MIRRORED | UCBF_REBUILD;
-	pdev->DiskMirror[index ^ 1].reconstructPoint = 0;						// start the reconstruct
-	pdev->reconCount = 1990;												// mark target drive early
-	return pdev->DiskMirror[index].reconstructPoint;
-	}
-/****************************************************************
- *	Name:	ReconTimerExpiry	:LOCAL
- *
- *	Description:	Reconstruct timer expiry routine.
- *
- *	Parameters:		data - Pointer adapter data structure.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static void ReconTimerExpiry (unsigned long data)
-	{
-	PADAPTER2220I	padapter = (PADAPTER2220I)data;
-	struct Scsi_Host *host = padapter->SCpnt->device->host;
-	POUR_DEVICE		pdev;
-	ULONG			testsize = 0;
-	PIDENTIFY_DATA	pid;
-	USHORT			minmode;
-	ULONG			zl;
-	UCHAR			zc;
-	USHORT			z;
-    unsigned long	flags;
-
-    /*
-     * Disable interrupts, if they aren't already disabled and acquire
-     * the I/O spinlock.
-     */
-    spin_lock_irqsave(host->host_lock, flags);
-
-	if ( padapter->SCpnt )
-		goto reconTimerExpiry;
-
-	padapter->reconTimer.data = 0;
-	for ( z = padapter->devInReconIndex + 1;  z < BIGD_MAXDRIVES;  z++ )
-		{
-		if ( padapter->device[z].reconOn )
-			break;
-		}
-	if ( z < BIGD_MAXDRIVES )
-		pdev = &padapter->device[z];
-	else
-		{
-		for ( z = 0;  z < BIGD_MAXDRIVES;  z++ )
-			{
-			if ( padapter->device[z].reconOn )
-				break;
-			}
-		if ( z < BIGD_MAXDRIVES )
-			pdev = &padapter->device[z];
-		else
-			{
-			padapter->reconOn = FALSE;
-			goto reconTimerExpiry;
-			}
-		}
-
-	padapter->devInReconIndex = z;
-	pid = (PIDENTIFY_DATA)padapter->kBuffer;
-	padapter->pdev = pdev;
-	if ( pdev->reconIsStarting )
-		{
-		pdev->reconIsStarting = FALSE;
-		pdev->reconOn = FALSE;
-
-		while ( (pdev->DiskMirror[0].signature == SIGNATURE) && (pdev->DiskMirror[1].signature == SIGNATURE) &&
-			 (pdev->DiskMirror[0].pairIdentifier == (pdev->DiskMirror[1].pairIdentifier ^ 1)) )
-			{
-			if ( (pdev->DiskMirror[0].status & UCBF_MATCHED) && (pdev->DiskMirror[1].status & UCBF_MATCHED) )
-				break;
-
-			if ( pdev->DiskMirror[0].status & UCBF_SURVIVOR )				// is first drive survivor?
-				testsize = SetReconstruct (pdev, 0);
-			else
-				if ( pdev->DiskMirror[1].status & UCBF_SURVIVOR )			// is second drive survivor?
-					testsize = SetReconstruct (pdev, 1);
-
-			if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
-				{
-				if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-					pdev->mirrorRecon = 0;
-				else
-					pdev->mirrorRecon = 1;
-				pdev->reconOn = TRUE;
-				}
-			break;
-			}
-
-		if ( !pdev->reconOn )
-			goto reconTimerExpiry;
-
-		if ( padapter->bigD )
-			{
-			padapter->failRegister = 0;
-			outb_p (~padapter->failRegister, padapter->regFail);
-			}
-		else
-			{
-			zc = ((inb_p (padapter->regStatSel) >> 3) | inb_p (padapter->regStatSel)) & 0x83;		// mute the alarm
-			outb_p (0xFF, padapter->regFail);
-			}
-
-		while ( 1 )
-			{
-			DEB (printk ("\npci2220i: hard reset issue"));
-			if ( HardReset (padapter, pdev, pdev->spigots[pdev->mirrorRecon]) )
-				{
-				DEB (printk ("\npci2220i: sub 1"));
-				break;
-				}
-
-			pdev->lastsectorlba[pdev->mirrorRecon] = InlineIdentify (padapter, pdev->spigots[pdev->mirrorRecon], pdev->deviceID[pdev->mirrorRecon] & 1);
-
-			if ( pdev->lastsectorlba[pdev->mirrorRecon] < testsize )
-				{
-				DEB (printk ("\npci2220i: sub 2 %ld %ld", pdev->lastsectorlba[pdev->mirrorRecon], testsize));
-				break;
-				}
-
-	        // test LBA and multiper sector transfer compatibility
-			if (!pid->SupportLBA || (pid->NumSectorsPerInt < SECTORSXFER) || !pid->Valid_64_70 )
-				{
-				DEB (printk ("\npci2220i: sub 3"));
-				break;
-				}
-
-	        // test PIO/bus matering mode compatibility
-			if ( (pid->MinPIOCycleWithoutFlow > 240) && !pid->SupportIORDYDisable && !padapter->timingPIO )
-				{
-				DEB (printk ("\npci2220i: sub 4"));
-				break;
-				}
-
-			if ( pid->MinPIOCycleWithoutFlow <= 120 )	// setup timing mode of drive
-				minmode = 5;
-			else
-				{
-				if ( pid->MinPIOCylceWithFlow <= 150 )
-					minmode = 4;
-				else
-					{
-					if ( pid->MinPIOCylceWithFlow <= 180 )
-						minmode = 3;
-					else
-						{
-						if ( pid->MinPIOCylceWithFlow <= 240 )
-							minmode = 2;
-						else
-							{
-							DEB (printk ("\npci2220i: sub 5"));
-							break;
-							}
-						}
-					}
-				}
-
-			if ( padapter->timingMode > minmode )									// set minimum timing mode
-				padapter->timingMode = minmode;
-			if ( padapter->timingMode >= 2 )
-				padapter->timingAddress	= ModeArray[padapter->timingMode - 2];
-			else
-				padapter->timingPIO = TRUE;
-
-			padapter->reconOn = TRUE;
-			break;
-			}
-
-		if ( !pdev->reconOn )
-			{		
-			padapter->survivor = pdev->mirrorRecon ^ 1;
-			padapter->reconPhase = RECON_PHASE_FAILOVER;
-			DEB (printk ("\npci2220i: FAILURE 7"));
-			InitFailover (padapter, pdev);
-			goto reconTimerExpiry;
-			}
-
-		pdev->raid = TRUE;
-	
-		if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) )
-			goto reconTimerExpiry;
-		padapter->reconPhase = RECON_PHASE_MARKING;
-		goto reconTimerExpiry;
-		}
-
-	//**********************************
-	// reconstruct copy starts here	
-	//**********************************
-	if ( pdev->reconCount++ > 2000 )
-		{
-		pdev->reconCount = 0;
-		if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) )
-			{
-			padapter->survivor = pdev->mirrorRecon ^ 1;
-			padapter->reconPhase = RECON_PHASE_FAILOVER;
-			DEB (printk ("\npci2220i: FAILURE 8"));
-			InitFailover (padapter, pdev);
-			goto reconTimerExpiry;
-			}
-		padapter->reconPhase = RECON_PHASE_UPDATE;
-		goto reconTimerExpiry;
-		}
-
-	zl = pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint;	
-	padapter->reconSize = pdev->DiskMirror[pdev->mirrorRecon ^ 1].reconstructPoint - zl;
-	if ( padapter->reconSize > MAX_BUS_MASTER_BLOCKS )
-		padapter->reconSize = MAX_BUS_MASTER_BLOCKS;
-
-	if ( padapter->reconSize )
-		{
-		SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]);	// select the spigots
-		outb_p (pdev->byte6 | ((UCHAR *)(&zl))[3], padapter->regLba24);	// select the drive
-		SelectSpigot (padapter, pdev->spigot);
-		if ( WaitReady (padapter) )
-			goto reconTimerExpiry;
-
-		SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
-		if ( WaitReady (padapter) )
-			{
-			padapter->survivor = pdev->mirrorRecon ^ 1;
-			padapter->reconPhase = RECON_PHASE_FAILOVER;
-			DEB (printk ("\npci2220i: FAILURE 9"));
-			InitFailover (padapter, pdev);
-			goto reconTimerExpiry;
-			}
-	
-		SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]);
-		outb_p (padapter->reconSize & 0xFF, padapter->regSectCount);
-		outb_p (((UCHAR *)(&zl))[0], padapter->regLba0);
-		outb_p (((UCHAR *)(&zl))[1], padapter->regLba8);
-		outb_p (((UCHAR *)(&zl))[2], padapter->regLba16);
-		padapter->expectingIRQ = TRUE;
-		padapter->reconPhase = RECON_PHASE_READY;
-		SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
-		WriteCommand (padapter, WRITE_CMD);
-		StartTimer (padapter);
-		SelectSpigot (padapter, pdev->spigot);
-		WriteCommand (padapter, READ_CMD);
-		goto reconTimerExpiry;
-		}
-
-	pdev->DiskMirror[pdev->mirrorRecon].status = UCBF_MIRRORED | UCBF_MATCHED;
-	pdev->DiskMirror[pdev->mirrorRecon ^ 1].status = UCBF_MIRRORED | UCBF_MATCHED;
-	if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) )
-		goto reconTimerExpiry;
-	padapter->reconPhase = RECON_PHASE_LAST;
-
-reconTimerExpiry:;
-    /*
-     * Release the I/O spinlock and restore the original flags
-     * which will enable interrupts if and only if they were
-     * enabled on entry.
-     */
-    spin_unlock_irqrestore(host->host_lock, flags);
-	}
-/****************************************************************
- *	Name:	Irq_Handler	:LOCAL
- *
- *	Description:	Interrupt handler.
- *
- *	Parameters:		irq		- Hardware IRQ number.
- *					dev_id	-
- *					regs	-
- *
- *	Returns:		TRUE if drive is not ready in time.
- *
- ****************************************************************/
-static irqreturn_t Irq_Handler (int irq, void *dev_id, struct pt_regs *regs)
-	{
-	struct Scsi_Host   *shost = NULL;	// Pointer to host data block
-	PADAPTER2220I		padapter;		// Pointer to adapter control structure
-	POUR_DEVICE			pdev;
-	Scsi_Cmnd		   *SCpnt;
-	UCHAR				status;
-	UCHAR				status1;
-	ATAPI_STATUS		statusa;
-	ATAPI_REASON		reasona;
-	ATAPI_ERROR			errora;
-	int					z;
-	ULONG				zl;
-    unsigned long		flags;
-    int handled = 0;
-
-//	DEB (printk ("\npci2220i received interrupt\n"));
-
-	for ( z = 0; z < NumAdapters;  z++ )								// scan for interrupt to process
-		{
-		if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) )
-			{
-			if ( inw_p (HOSTDATA(PsiHost[z])->regIrqControl) & 0x8000 )
-				{
-				shost = PsiHost[z];
-				break;
-				}
-			}
-		}
-
-	if ( !shost )
-		{
-		DEB (printk ("\npci2220i: not my interrupt"));
-		goto out;
-		}
-
-	handled = 1;
-	spin_lock_irqsave(shost->host_lock, flags);
-	padapter = HOSTDATA(shost);
-	pdev = padapter->pdev;
-	SCpnt = padapter->SCpnt;
-	outb_p (0x08, padapter->regDmaCmdStat);									// cancel interrupt from DMA engine
-
-	if ( padapter->atapi && SCpnt )
-		{
-		*(char *)&statusa = inb_p (padapter->regStatCmd);						// read the device status
-		*(char *)&reasona = inb_p (padapter->regSectCount);						// read the device interrupt reason
-	
-		if ( !statusa.bsy )
-			{
-			if ( statusa.drq )													// test for transfer phase
-				{
-				if ( !reasona.cod )												// test for data phase
-					{
-					z = (ULONG)inb_p (padapter->regLba8) | (ULONG)(inb_p (padapter->regLba16) << 8);
-					if ( padapter->reqSense )
-						insw (padapter->regData, SCpnt->sense_buffer, z / 2);
-					else
-						AtapiBusMaster (padapter, reasona.io, z);
-					goto irq_return;
-					}
-				if ( reasona.cod && !reasona.io )								// test for command packet phase
-					{
-					if ( padapter->reqSense )
-						AtapiRequestSense (padapter, pdev, SCpnt, TRUE);
-					else
-						AtapiSendCdb (padapter, pdev, padapter->atapiCdb);
-					goto irq_return;
-					}
-				}
-			else
-				{
-				if ( reasona.io && statusa.drdy )								// test for status phase
-					{
-					Atapi2Scsi (padapter, SCpnt);
-					if ( statusa.check )
-						{
-						*(UCHAR *)&errora = inb_p (padapter->regError);			// read the device error
-						if ( errora.senseKey )
-							{
-							if ( padapter->reqSense || AtapiRequestSense (padapter, pdev, SCpnt, FALSE) )
-								OpDone (padapter, DID_ERROR << 16);
-							}
-						else
-							{
-							if ( errora.ili || errora.abort )
-								OpDone (padapter, DID_ERROR << 16);
-							else
-								OpDone (padapter, DID_OK << 16);	
-							}
-						}
-					else
-						if ( padapter->reqSense )
-							{
-							DEB (printk ("PCI2242I: Sense codes - %X %X %X ", ((UCHAR *)SCpnt->sense_buffer)[0], ((UCHAR *)SCpnt->sense_buffer)[12], ((UCHAR *)SCpnt->sense_buffer)[13]));
-							OpDone (padapter, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2);
-							}
-						else
-							OpDone (padapter, DID_OK << 16);	
-					}
-				}
-			}		
-		goto irq_return;
-		}
-	
-	if ( !padapter->expectingIRQ || !(SCpnt || padapter->reconPhase) )
-		{
-		DEB(printk ("\npci2220i Unsolicited interrupt\n"));
-		STOP_HERE ();
-		goto irq_return;
-		}
-	padapter->expectingIRQ = 0;
-
-	if ( padapter->failinprog )
-		{
-		DEB (printk ("\npci2220i interrupt failover complete"));
-		padapter->failinprog = FALSE;
-		status = inb_p (padapter->regStatCmd);								// read the device status
-		if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-			{
-			DEB (printk ("\npci2220i: interrupt failover error from drive %X", status));
-			padapter->cmd = 0;
-			}
-		else
-			{
-			DEB (printk ("\npci2220i: restarting failed opertation."));
-			pdev->spigot = (padapter->survivor) ? pdev->spigots[1] : pdev->spigots[0];
-			del_timer (&padapter->timer);
-			if ( padapter->reconPhase )
-				OpDone (padapter, DID_OK << 16);
-			else
-				Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done);
-			goto irq_return;		
-			}
-		}
-
-	if ( padapter->reconPhase )
-		{
-		switch ( padapter->reconPhase )
-			{
-			case RECON_PHASE_MARKING:
-			case RECON_PHASE_LAST:
-				status = inb_p (padapter->regStatCmd);						// read the device status
-				del_timer (&padapter->timer);
-				if ( padapter->reconPhase == RECON_PHASE_LAST )
-					{
-					if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-						{
-						padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
-						DEB (printk ("\npci2220i: FAILURE 10"));
-						if ( InitFailover (padapter, pdev) )
-							OpDone (padapter, DecodeError (padapter, status));
-						goto irq_return;
-						}
-					if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) )
-						{
-						padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-						DEB (printk ("\npci2220i: FAILURE 11"));
-						if ( InitFailover (padapter, pdev) )
-							OpDone (padapter, DecodeError (padapter, status));
-						goto irq_return;
-						}
-					padapter->reconPhase = RECON_PHASE_END;	
-					goto irq_return;
-					}
-				OpDone (padapter, DID_OK << 16);
-				goto irq_return;
-
-			case RECON_PHASE_READY:
-				status = inb_p (padapter->regStatCmd);						// read the device status
-				if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-					{
-					del_timer (&padapter->timer);
-					OpDone (padapter, DecodeError (padapter, status));
-					goto irq_return;
-					}
-				SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
-				if ( WaitDrq (padapter) )
-					{
-					del_timer (&padapter->timer);
-					padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-					DEB (printk ("\npci2220i: FAILURE 12"));
-					if ( InitFailover (padapter, pdev) )
-						OpDone (padapter, DecodeError (padapter, status));
-					goto irq_return;
-					}
-				SelectSpigot (padapter, pdev->spigot | SEL_COPY | padapter->bigD);
-				padapter->reconPhase = RECON_PHASE_COPY;
-				padapter->expectingIRQ = TRUE;
-				if ( padapter->timingPIO )
-					{
-					insw (padapter->regData, padapter->kBuffer, padapter->reconSize * (BYTES_PER_SECTOR / 2));
-					}
-				else
-					{
-					if ( (padapter->timingMode > 3) )
-						{
-						if ( padapter->bigD )
-							outl (BIGD_DATA_MODE3, padapter->regDmaAddrLoc);
-						else
-							outl (DALE_DATA_MODE3, padapter->regDmaAddrLoc);
-						}
-					else
-						outl (padapter->timingAddress, padapter->regDmaAddrLoc);
-					outl (padapter->kBufferDma, padapter->regDmaAddrPci);
-					outl (padapter->reconSize * BYTES_PER_SECTOR, padapter->regDmaCount);
-					outb_p (8, padapter->regDmaDesc);						// read operation
-					if ( padapter->bigD )
-						outb_p (8, padapter->regDmaMode);					// no interrupt
-					else
-						outb_p (1, padapter->regDmaMode);					// no interrupt
-					outb_p (0x03, padapter->regDmaCmdStat);					// kick the DMA engine in gear
-					}
-				goto irq_return;
-
-			case RECON_PHASE_COPY:
-				pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint += padapter->reconSize;
-
-			case RECON_PHASE_UPDATE:
-				SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon] | SEL_IRQ_OFF);
-				status = inb_p (padapter->regStatCmd);						// read the device status
-				del_timer (&padapter->timer);
-				if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-					{
-					padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-					DEB (printk ("\npci2220i: FAILURE 13"));
-					DEB (printk ("\n  status register = %X   error = %X", status, inb_p (padapter->regError)));
-					if ( InitFailover (padapter, pdev) )
-						OpDone (padapter, DecodeError (padapter, status));
-					goto irq_return;
-					}
-				OpDone (padapter, DID_OK << 16);
-				goto irq_return;
-
-			case RECON_PHASE_END:
-				status = inb_p (padapter->regStatCmd);						// read the device status
-				del_timer (&padapter->timer);
-				if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-					{
-					padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
-					DEB (printk ("\npci2220i: FAILURE 14"));
-					if ( InitFailover (padapter, pdev) )
-						OpDone (padapter, DecodeError (padapter, status));
-					goto irq_return;
-					}
-				pdev->reconOn = 0;
-				if ( padapter->bigD )
-					{
-					for ( z = 0;  z < padapter->numberOfDrives;  z++ )
-						{
-						if ( padapter->device[z].DiskMirror[0].status & UCBF_SURVIVOR )
-							{
-							Alarm (padapter, padapter->device[z].deviceID[0] ^ 2);
-							MuteAlarm (padapter);
-							}
-						if ( padapter->device[z].DiskMirror[1].status & UCBF_SURVIVOR )
-							{
-							Alarm (padapter, padapter->device[z].deviceID[1] ^ 2);
-							MuteAlarm (padapter);
-							}
-						}
-					}
-				OpDone (padapter, DID_OK << 16);
-				goto irq_return;
-
-			default:
-				goto irq_return;
-			}
-		}
-		
-	switch ( padapter->cmd )												// decide how to handle the interrupt
-		{
-		case READ_CMD:
-			if ( padapter->sectorCount )
-				{
-				status = inb_p (padapter->regStatCmd);						// read the device status
-				if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-					{
-					if ( pdev->raid )
-						{
-						padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
-						del_timer (&padapter->timer);
-						DEB (printk ("\npci2220i: FAILURE 15"));
-						if ( !InitFailover (padapter, pdev) )
-							goto irq_return;
-						}
-					break;	
-					}
-				if ( padapter->timingPIO )
-					{
-					insw (padapter->regData, padapter->kBuffer, padapter->readCount / 2);
-					padapter->sectorCount -= padapter->readCount / BYTES_PER_SECTOR;
-					WalkScatGath (padapter, TRUE, padapter->readCount);
-					if ( !padapter->sectorCount )
-						{
-						status = 0;
-						break;
-						}
-					}
-				else
-					{
-					if ( padapter->readCount )
-						WalkScatGath (padapter, TRUE, padapter->readCount);
-					BusMaster (padapter, 1, 1);
-					}
-				padapter->expectingIRQ = TRUE;
-				goto irq_return;
-				}
-			if ( padapter->readCount && !padapter->timingPIO )
-				WalkScatGath (padapter, TRUE, padapter->readCount);
-			status = 0;
-			break;
-
-		case WRITE_CMD:
-			if ( pdev->raid )
-				{
-				SelectSpigot (padapter, pdev->spigots[0] | SEL_IRQ_OFF);				
-				status = inb_p (padapter->regStatCmd);								// read the device status
-				SelectSpigot (padapter, pdev->spigots[1] | SEL_IRQ_OFF);				
-				status1 = inb_p (padapter->regStatCmd);								// read the device status
-				}
-			else
-				SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF);				
-				status = inb_p (padapter->regStatCmd);								// read the device status
-				status1 = 0;
-		
-			if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-				{	
-				if ( pdev->raid && !(status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT)) )
-					{
-					padapter->survivor = 1;
-					del_timer (&padapter->timer);
-					SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF);
-					DEB (printk ("\npci2220i: FAILURE 16  status = %X  error = %X", status, inb_p (padapter->regError)));
-					if ( !InitFailover (padapter, pdev) )
-						goto irq_return;
-					}
-				break;
-				}
-			if ( pdev->raid )
-				{
-				if ( status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
-					{	
-					padapter->survivor = 0;
-					del_timer (&padapter->timer);
-					DEB (printk ("\npci2220i: FAILURE 17  status = %X  error = %X", status1, inb_p (padapter->regError)));
-					if ( !InitFailover (padapter, pdev) )
-						goto irq_return;
-					status = status1;
-					break;
-					}
-				if ( padapter->sectorCount )
-					{
-					status = WriteDataBoth (padapter, pdev);
-					if ( status )
-						{
-						padapter->survivor = status >> 1;
-						del_timer (&padapter->timer);
-						DEB (printk ("\npci2220i: FAILURE 18"));
-						if ( !InitFailover (padapter, pdev) )
-							goto irq_return;
-						SelectSpigot (padapter, pdev->spigots[status] | SEL_IRQ_OFF);				
-						status = inb_p (padapter->regStatCmd);								// read the device status
-						break;
-						}
-					padapter->expectingIRQ = TRUE;
-					goto irq_return;
-					}
-				status = 0;
-				break;
-				}
-			if ( padapter->sectorCount )	
-				{	
-				SelectSpigot (padapter, pdev->spigot | padapter->bigD);
-				status = WriteData (padapter);
-				if ( status )
-					break;
-				padapter->expectingIRQ = TRUE;
-				goto irq_return;
-				}
-			status = 0;
-			break;
-
-		case IDE_COMMAND_IDENTIFY:
-			{
-			PINQUIRYDATA	pinquiryData  = SCpnt->request_buffer;
-			PIDENTIFY_DATA	pid = (PIDENTIFY_DATA)padapter->kBuffer;
-
-			status = inb_p (padapter->regStatCmd);
-			if ( status & IDE_STATUS_DRQ )
-				{
-				insw (padapter->regData, pid, sizeof (IDENTIFY_DATA) >> 1);
-
-				memset (pinquiryData, 0, SCpnt->request_bufflen);		// Zero INQUIRY data structure.
-				pinquiryData->DeviceType = 0;
-				pinquiryData->Versions = 2;
-				pinquiryData->AdditionalLength = 35 - 4;
-
-				// Fill in vendor identification fields.
-				for ( z = 0;  z < 20;  z += 2 )
-					{
-					pinquiryData->VendorId[z]	  = ((UCHAR *)pid->ModelNumber)[z + 1];
-					pinquiryData->VendorId[z + 1] = ((UCHAR *)pid->ModelNumber)[z];
-					}
-
-				// Initialize unused portion of product id.
-				for ( z = 0;  z < 4;  z++ )
-					pinquiryData->ProductId[12 + z] = ' ';
-
-				// Move firmware revision from IDENTIFY data to
-				// product revision in INQUIRY data.
-				for ( z = 0;  z < 4;  z += 2 )
-					{
-					pinquiryData->ProductRevisionLevel[z]	 = ((UCHAR *)pid->FirmwareRevision)[z + 1];
-					pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)pid->FirmwareRevision)[z];
-					}
-				if ( pdev == padapter->device )
-					*((USHORT *)(&pinquiryData->VendorSpecific)) = DEVICE_DALE_1;
-				
-				status = 0;
-				}
-			break;
-			}
-
-		default:
-			status = 0;
-			break;
-		}
-
-	del_timer (&padapter->timer);
-	if ( status )
-		{
-		DEB (printk ("\npci2220i Interrupt handler return error"));
-		zl = DecodeError (padapter, status);
-		}
-	else
-		zl = DID_OK << 16;
-
-	OpDone (padapter, zl);
-irq_return:
-    spin_unlock_irqrestore(shost->host_lock, flags);
-out:
-	return IRQ_RETVAL(handled);
-}
-
-/****************************************************************
- *	Name:	Pci2220i_QueueCommand
- *
- *	Description:	Process a queued command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *					done  - Pointer to done function to call.
- *
- *	Returns:		Status code.
- *
- ****************************************************************/
-int Pci2220i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
-	{
-	UCHAR		   *cdb = (UCHAR *)SCpnt->cmnd;					// Pointer to SCSI CDB
-	PADAPTER2220I	padapter = HOSTDATA(SCpnt->device->host);			// Pointer to adapter control structure
-	POUR_DEVICE		pdev	 = &padapter->device[SCpnt->device->id];// Pointer to device information
-	UCHAR			rc;											// command return code
-	int				z; 
-	PDEVICE_RAID1	pdr;
-
-	SCpnt->scsi_done = done;
-	padapter->SCpnt = SCpnt;  									// Save this command data
-	padapter->readCount = 0;
-
-	if ( SCpnt->use_sg )
-		{
-		padapter->currentSgBuffer = ((struct scatterlist *)SCpnt->request_buffer)[0].address;
-		padapter->currentSgCount = ((struct scatterlist *)SCpnt->request_buffer)[0].length;
-		}
-	else
-		{
-		padapter->currentSgBuffer = SCpnt->request_buffer;
-		padapter->currentSgCount = SCpnt->request_bufflen;
-		}
-	padapter->nextSg = 1;
-
-	if ( !done )
-		{
-		printk("pci2220i_queuecommand: %02X: done can't be NULL\n", *cdb);
-		return 0;
-		}
-	
-	if ( padapter->atapi )
-		{
-		UCHAR			zlo, zhi;
-
-		DEB (printk ("\nPCI2242I: ID %d, LUN %d opcode %X ", SCpnt->device->id, SCpnt->device->lun, *cdb));
-		padapter->pdev = pdev;
-		if ( !pdev->byte6 || SCpnt->device->lun )
-			{
-			OpDone (padapter, DID_BAD_TARGET << 16);
-			return 0;
-			}
-	
-		padapter->atapiSpecial = FALSE;
-		padapter->reqSense = FALSE;
-		memset (padapter->atapiCdb, 0, 16);
-		SelectSpigot (padapter, pdev->spigot);									// select the spigot
-		AtapiDevice (padapter, pdev->byte6);									// select the drive
-		if ( AtapiWaitReady (padapter, 100) )
-			{
-			OpDone (padapter, DID_NO_CONNECT << 16);
-			return 0;
-			}
-
-		switch ( cdb[0] ) 
-			{
-			case SCSIOP_MODE_SENSE:
-			case SCSIOP_MODE_SELECT:
-				Scsi2Atapi (padapter, SCpnt);
-				z = SCpnt->request_bufflen + 4;
-				break;
-			case SCSIOP_READ6:
-			case SCSIOP_WRITE6:
-				Scsi2Atapi (padapter, SCpnt);
-				z = SCpnt->request_bufflen;
-				break;
-			default:
-				memcpy (padapter->atapiCdb, cdb, SCpnt->cmd_len);
-				z = SCpnt->request_bufflen;
-				break;
-			}
-		if ( z > ATAPI_TRANSFER )
-			z = ATAPI_TRANSFER;
-	    zlo = (UCHAR)(z & 0xFF);
-	    zhi = (UCHAR)(z >> 8);
-
-	 	AtapiCountLo (padapter, zlo);						
-	   	AtapiCountHi (padapter, zhi);						
-	   	outb_p (0, padapter->regError);						
-		WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET);
-		if ( pdev->cmdDrqInt )
-			return 0;
-
-		if ( AtapiWaitDrq (padapter, 500) )
-			{
-			OpDone (padapter, DID_ERROR << 16);
-			return 0;
-			}
-		AtapiSendCdb (padapter, pdev, padapter->atapiCdb);	
-		return 0;
-		}
-	
-	if ( padapter->reconPhase )
-		return 0;
-	if ( padapter->reconTimer.data )
-		{
-		del_timer (&padapter->reconTimer);
-		padapter->reconTimer.data = 0;
-		}
-		
-	if ( (SCpnt->device->id >= padapter->numberOfDrives) || SCpnt->device->lun )
-		{
-		OpDone (padapter, DID_BAD_TARGET << 16);
-		return 0;
-		}
-	
-	switch ( *cdb )
-		{
-		case SCSIOP_INQUIRY:   					// inquiry CDB
-			{
-			if ( cdb[2] == SC_MY_RAID )
-				{
-				switch ( cdb[3] ) 
-					{
-					case MY_SCSI_REBUILD:
-						for ( z = 0;  z < padapter->numberOfDrives;  z++ )
-							{
-							pdev = &padapter->device[z];
-							if ( ((pdev->DiskMirror[0].status & UCBF_SURVIVOR) && (pdev->DiskMirror[1].status & UCBF_MIRRORED)) ||
-								 ((pdev->DiskMirror[1].status & UCBF_SURVIVOR) && (pdev->DiskMirror[0].status & UCBF_MIRRORED)) )
-								{
-								padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
-								}
-							}
-						OpDone (padapter, DID_OK << 16);
-						break;
-					case MY_SCSI_ALARMMUTE:
-						MuteAlarm (padapter);
-						OpDone (padapter, DID_OK << 16);
-						break;
-					case MY_SCSI_DEMOFAIL:
-						padapter->demoFail = TRUE;				
-						OpDone (padapter, DID_OK << 16);
-						break;
-					default:
-						z = cdb[5];				// get index
-						pdr = (PDEVICE_RAID1)SCpnt->request_buffer;
-						if ( padapter->raidData[z] )
-							{
-							memcpy (&pdr->DiskRaid1, padapter->raidData[z], sizeof (DISK_MIRROR));
-							if ( padapter->raidData[z]->reconstructPoint > padapter->raidData[z ^ 2]->reconstructPoint )
-								pdr->TotalSectors = padapter->raidData[z]->reconstructPoint;
-							else
-								pdr->TotalSectors = padapter->raidData[z ^ 2]->reconstructPoint;
-							}
-						else
-							memset (pdr, 0, sizeof (DEVICE_RAID1));
-						OpDone (padapter, DID_OK << 16);
-						break;
-					}	
-				return 0;
-				}
-			padapter->cmd = IDE_COMMAND_IDENTIFY;
-			break;
-			}
-
-		case SCSIOP_TEST_UNIT_READY:			// test unit ready CDB
-			OpDone (padapter, DID_OK << 16);
-			return 0;
-		case SCSIOP_READ_CAPACITY:			  	// read capctiy CDB
-			{
-			PREAD_CAPACITY_DATA	pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer;
-
-			pdata->blksiz = 0x20000;
-			XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks);
-			OpDone (padapter, DID_OK << 16);
-			return 0;
-			}
-		case SCSIOP_VERIFY:						// verify CDB
-			padapter->startSector = XSCSI2LONG (&cdb[2]);
-			padapter->sectorCount = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8));
-			padapter->cmd = IDE_COMMAND_VERIFY;
-			break;
-		case SCSIOP_READ:						// read10 CDB
-			padapter->startSector = XSCSI2LONG (&cdb[2]);
-			padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
-			padapter->cmd = READ_CMD;
-			break;
-		case SCSIOP_READ6:						// read6  CDB
-			padapter->startSector = SCSI2LONG (&cdb[1]);
-			padapter->sectorCount = cdb[4];
-			padapter->cmd = READ_CMD;
-			break;
-		case SCSIOP_WRITE:						// write10 CDB
-			padapter->startSector = XSCSI2LONG (&cdb[2]);
-			padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
-			padapter->cmd = WRITE_CMD;
-			break;
-		case SCSIOP_WRITE6:						// write6  CDB
-			padapter->startSector = SCSI2LONG (&cdb[1]);
-			padapter->sectorCount = cdb[4];
-			padapter->cmd = WRITE_CMD;
-			break;
-		default:
-			DEB (printk ("pci2220i_queuecommand: Unsupported command %02X\n", *cdb));
-			OpDone (padapter, DID_ERROR << 16);
-			return 0;
-		}
-
-	if ( padapter->reconPhase )
-		return 0;
-	
-	padapter->pdev = pdev;
-
-	while ( padapter->demoFail )
-		{
-		pdev = padapter->pdev = &padapter->device[0];
-		padapter->demoFail = FALSE;
-		if ( !pdev->raid || 
-			 (pdev->DiskMirror[0].status & UCBF_SURVIVOR) || 
-			 (pdev->DiskMirror[1].status & UCBF_SURVIVOR) )
-			{
-			break;
-			}
-		if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-			padapter->survivor = 1;
-		else
-			padapter->survivor = 0;
-				DEB (printk ("\npci2220i: FAILURE 19"));
-		if ( InitFailover (padapter, pdev) )
-			break;
-		return 0;
-		}
-
-	StartTimer (padapter);
-	if ( pdev->raid && (padapter->cmd == WRITE_CMD) )
-		{
-		rc = IdeCmdBoth (padapter, pdev);
-		if ( !rc )
-			rc = WriteDataBoth (padapter, pdev);
-		if ( rc )
-			{
-			del_timer (&padapter->timer);
-			padapter->expectingIRQ = 0;
-			padapter->survivor = rc >> 1;
-				DEB (printk ("\npci2220i: FAILURE 20"));
-			if ( InitFailover (padapter, pdev) )
-				{
-				OpDone (padapter, DID_ERROR << 16);
-				return 0;
-				}
-			}
-		}
-	else
-		{
-		rc = IdeCmd (padapter, pdev);
-		if ( (padapter->cmd == WRITE_CMD) && !rc )
-			rc = WriteData (padapter);
-		if ( rc )
-			{
-			del_timer (&padapter->timer);
-			padapter->expectingIRQ = 0;
-			if ( pdev->raid )
-				{
-				padapter->survivor = (pdev->spigot ^ 3) >> 1;
-				DEB (printk ("\npci2220i: FAILURE 21"));
-				if ( !InitFailover (padapter, pdev) )
-					return 0;
-				}
-			OpDone (padapter, DID_ERROR << 16);
-			return 0;
-			}
-		}
-	return 0;
-	}
-/****************************************************************
- *	Name:			ReadFlash
- *
- *	Description:	Read information from controller Flash memory.
- *
- *	Parameters:		padapter - Pointer to host interface data structure.
- *					pdata	 - Pointer to data structures.
- *					base	 - base address in Flash.
- *					length	 - lenght of data space in bytes.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-static VOID ReadFlash (PADAPTER2220I padapter, VOID *pdata, ULONG base, ULONG length)
-	{
-	ULONG	 oldremap;
-	UCHAR	 olddesc;
-	ULONG	 z;
-	UCHAR	*pd = (UCHAR *)pdata;
-
-	oldremap = inl (padapter->regRemap);							// save values to restore later
-	olddesc  = inb_p (padapter->regDesc);
-
-	outl (base | 1, padapter->regRemap);							// remap to Flash space as specified
-	outb_p (0x40, padapter->regDesc);								// describe remap region as 8 bit
-	for ( z = 0;  z < length;  z++)									// get "length" data count
-		*pd++ = inb_p (padapter->regBase + z);						// read in the data
-
-	outl (oldremap, padapter->regRemap);							// restore remap register values
-	outb_p (olddesc, padapter->regDesc);
-	}
-/****************************************************************
- *	Name:			GetRegs
- *
- *	Description:	Initialize the regester information.
- *
- *	Parameters:		pshost		  - Pointer to SCSI host data structure.
- *					bigd		  - PCI-2240I identifier
- *					pcidev		  - Pointer to device data structure.
- *
- *	Returns:		TRUE if failure to install.
- *
- ****************************************************************/
-static USHORT GetRegs (struct Scsi_Host *pshost, BOOL bigd, struct pci_dev *pcidev)
-	{
-	PADAPTER2220I	padapter;
-	int				setirq;
-	int				z;
-	USHORT			zr, zl;
-	UCHAR		   *consistent;
-	dma_addr_t		consistentDma;
-
-	padapter = HOSTDATA(pshost);
-	memset (padapter, 0, sizeof (ADAPTER2220I));
-	memset (&DaleSetup, 0, sizeof (DaleSetup));
-	memset (DiskMirror, 0, sizeof (DiskMirror));
-
-	zr = pci_resource_start (pcidev, 1);
-	zl = pci_resource_start (pcidev, 2);
-
-	padapter->basePort = zr;
-	padapter->regRemap		= zr + RTR_LOCAL_REMAP;					// 32 bit local space remap
-	padapter->regDesc		= zr + RTR_REGIONS;	  					// 32 bit local region descriptor
-	padapter->regRange		= zr + RTR_LOCAL_RANGE;					// 32 bit local range
-	padapter->regIrqControl	= zr + RTR_INT_CONTROL_STATUS;			// 16 bit interrupt control and status
-	padapter->regScratchPad	= zr + RTR_MAILBOX;	  					// 16 byte scratchpad I/O base address
-
-	padapter->regBase		= zl;
-	padapter->regData		= zl + REG_DATA;						// data register I/O address
-	padapter->regError		= zl + REG_ERROR;						// error register I/O address
-	padapter->regSectCount	= zl + REG_SECTOR_COUNT;				// sector count register I/O address
-	padapter->regLba0		= zl + REG_LBA_0;						// least significant byte of LBA
-	padapter->regLba8		= zl + REG_LBA_8;						// next least significant byte of LBA
-	padapter->regLba16		= zl + REG_LBA_16;						// next most significan byte of LBA
-	padapter->regLba24		= zl + REG_LBA_24;						// head and most 4 significant bits of LBA
-	padapter->regStatCmd	= zl + REG_STAT_CMD;					// status on read and command on write register
-	padapter->regStatSel	= zl + REG_STAT_SEL;					// board status on read and spigot select on write register
-	padapter->regFail		= zl + REG_FAIL;
-	padapter->regAltStat	= zl + REG_ALT_STAT;
-	padapter->pcidev		= pcidev;
-
-	if ( bigd )
-		{
-		padapter->regDmaDesc	= zr + RTR_DMA0_DESC_PTR;			// address of the DMA discriptor register for direction of transfer
-		padapter->regDmaCmdStat	= zr + RTR_DMA_COMMAND_STATUS;		// Byte #0 of DMA command status register
-		padapter->regDmaAddrPci	= zr + RTR_DMA0_PCI_ADDR;			// 32 bit register for PCI address of DMA
-		padapter->regDmaAddrLoc	= zr + RTR_DMA0_LOCAL_ADDR;			// 32 bit register for local bus address of DMA
-		padapter->regDmaCount	= zr + RTR_DMA0_COUNT;				// 32 bit register for DMA transfer count
-		padapter->regDmaMode	= zr + RTR_DMA0_MODE + 1;			// 32 bit register for DMA mode control
-		padapter->bigD			= SEL_NEW_SPEED_1;					// set spigot speed control bit
-		}
-	else
-		{
-		padapter->regDmaDesc	= zl + RTL_DMA1_DESC_PTR;			// address of the DMA discriptor register for direction of transfer
-		padapter->regDmaCmdStat	= zl + RTL_DMA_COMMAND_STATUS + 1;	// Byte #1 of DMA command status register
-		padapter->regDmaAddrPci	= zl + RTL_DMA1_PCI_ADDR;			// 32 bit register for PCI address of DMA
-		padapter->regDmaAddrLoc	= zl + RTL_DMA1_LOCAL_ADDR;			// 32 bit register for local bus address of DMA
-		padapter->regDmaCount	= zl + RTL_DMA1_COUNT;				// 32 bit register for DMA transfer count
-		padapter->regDmaMode	= zl + RTL_DMA1_MODE + 1;			// 32 bit register for DMA mode control
-		}
-
-	padapter->numberOfDrives = inb_p (padapter->regScratchPad + BIGD_NUM_DRIVES);
-	if ( !bigd && !padapter->numberOfDrives )						// if no devices on this board
-		return TRUE;
-
-	pshost->irq = pcidev->irq;
-	setirq = 1;
-	for ( z = 0;  z < Installed;  z++ )								// scan for shared interrupts
-		{
-		if ( PsiHost[z]->irq == pshost->irq )						// if shared then, don't posses
-			setirq = 0;
-		}
-	if ( setirq )													// if not shared, posses
-		{
-		if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2220i", padapter) < 0 )
-			{
-			if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2220i", padapter) < 0 )
-				{
-				printk ("Unable to allocate IRQ for PCI-2220I controller.\n");
-				return TRUE;
-				}
-			}
-		padapter->irqOwned = pshost->irq;							// set IRQ as owned
-		}
-
-	if ( padapter->numberOfDrives )
-		consistent = pci_alloc_consistent (pcidev, SECTORSXFER * BYTES_PER_SECTOR, &consistentDma);
-	else
-		consistent = pci_alloc_consistent (pcidev, ATAPI_TRANSFER, &consistentDma);
-	if ( !consistent )
-		{
-		printk ("Unable to allocate DMA buffer for PCI-2220I controller.\n");
-		free_irq (pshost->irq, padapter);
-		return TRUE;
-		}
-	padapter->kBuffer = consistent;
-	padapter->kBufferDma = consistentDma;
-
-	PsiHost[Installed]	= pshost;									// save SCSI_HOST pointer
-	pshost->io_port		= padapter->basePort;
-	pshost->n_io_port	= 0xFF;
-	pshost->unique_id	= padapter->regBase;
-
-	outb_p (0x01, padapter->regRange);								// fix our range register because other drivers want to tromp on it
-
-	padapter->timingMode = inb_p (padapter->regScratchPad + DALE_TIMING_MODE);
-	if ( padapter->timingMode >= 2 )
-		{
-		if ( bigd )
-			padapter->timingAddress	= ModeArray2[padapter->timingMode - 2];
-		else
-			padapter->timingAddress	= ModeArray[padapter->timingMode - 2];
-		}
-	else
-		padapter->timingPIO = TRUE;
-
-	ReadFlash (padapter, &DaleSetup, DALE_FLASH_SETUP, sizeof (SETUP));
-	ReadFlash (padapter, &DiskMirror, DALE_FLASH_RAID, sizeof (DiskMirror));
-
-	return FALSE;
-	}
-/****************************************************************
- *	Name:			SetupFinish
- *
- *	Description:	Complete the driver initialization process for a card
- *
- *	Parameters:		padapter  - Pointer to SCSI host data structure.
- *					str		  - Pointer to board type string.
- *
- *	Returns:		Nothing.
- *
- ****************************************************************/
-VOID SetupFinish (PADAPTER2220I padapter, char *str, int irq)
-	{
-	init_timer (&padapter->timer);
-	padapter->timer.function = TimerExpiry;
-	padapter->timer.data = (unsigned long)padapter;
-	init_timer (&padapter->reconTimer);
-	padapter->reconTimer.function = ReconTimerExpiry;
-	padapter->reconTimer.data = (unsigned long)padapter;
-	printk("\nPCI-%sI EIDE CONTROLLER: at I/O = %lX/%lX  IRQ = %d\n", str, padapter->basePort, padapter->regBase, irq);
-	printk("Version %s, Compiled %s %s\n\n", PCI2220I_VERSION, __DATE__, __TIME__);
-	}	
-/****************************************************************
- *	Name:	Pci2220i_Detect
- *
- *	Description:	Detect and initialize our boards.
- *
- *	Parameters:		tpnt - Pointer to SCSI host template structure.
- *
- *	Returns:		Number of adapters installed.
- *
- ****************************************************************/
-int Pci2220i_Detect (Scsi_Host_Template *tpnt)
-	{
-	struct Scsi_Host   *pshost;
-	PADAPTER2220I	    padapter;
-	POUR_DEVICE			pdev;
-	int					unit;
-	int					z;
-	USHORT				raidon;
-	UCHAR				spigot1, spigot2;
-	UCHAR				device;
-	struct pci_dev	   *pcidev = NULL;
-
-	while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_DALE_1, pcidev)) != NULL )
-		{
-		if (pci_enable_device(pcidev))
-			continue;
-		pshost = scsi_register (tpnt, sizeof(ADAPTER2220I));
-		if(pshost==NULL)
-			continue;
-			
-		padapter = HOSTDATA(pshost);
-
-		if ( GetRegs (pshost, FALSE, pcidev) )
-			goto unregister;
-
-		scsi_set_device(pshost, &pcidev->dev);
-		pshost->max_id = padapter->numberOfDrives;
-		for ( z = 0;  z < padapter->numberOfDrives;  z++ )
-			{
-			unit = inb_p (padapter->regScratchPad + DALE_CHANNEL_DEVICE_0 + z) & 0x0F;
-			pdev = &padapter->device[z];
-			pdev->byte6		= (UCHAR)(((unit & 1) << 4) | 0xE0);
-			pdev->spigot	= (UCHAR)(1 << (unit >> 1));
-			pdev->sectors	= DaleSetup.setupDevice[unit].sectors;
-			pdev->heads		= DaleSetup.setupDevice[unit].heads;
-			pdev->cylinders = DaleSetup.setupDevice[unit].cylinders;
-			pdev->blocks	= DaleSetup.setupDevice[unit].blocks;
-
-			if ( !z )
-				{
-				DiskMirror[0].status = inb_p (padapter->regScratchPad + DALE_RAID_0_STATUS);		
-				DiskMirror[1].status = inb_p (padapter->regScratchPad + DALE_RAID_1_STATUS);		
-				if ( (DiskMirror[0].signature == SIGNATURE) && (DiskMirror[1].signature == SIGNATURE) &&
-				     (DiskMirror[0].pairIdentifier == (DiskMirror[1].pairIdentifier ^ 1)) )
-					{			 
-					raidon = TRUE;
-					if ( unit > (unit ^ 2) )
-						unit = unit ^ 2;
-					}	
-				else
-					raidon = FALSE;
-
-				memcpy (pdev->DiskMirror, DiskMirror, sizeof (DiskMirror));
-				padapter->raidData[0] = &pdev->DiskMirror[0];
-				padapter->raidData[2] = &pdev->DiskMirror[1];
-				
-				spigot1 = spigot2 = FALSE;
-				pdev->spigots[0] = 1;
-				pdev->spigots[1] = 2;
-				pdev->lastsectorlba[0] = InlineIdentify (padapter, 1, 0);
-				pdev->lastsectorlba[1] = InlineIdentify (padapter, 2, 0);
-						
-				if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] )
-					spigot1 = TRUE;
-				if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] )
-					spigot2 = TRUE;
-				if ( pdev->DiskMirror[0].status & DiskMirror[1].status & UCBF_SURVIVOR )
-					spigot1 = TRUE;
-
-				if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) )
-					InlineReadSignature (padapter, pdev, 0);
-				if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) )
-					InlineReadSignature (padapter, pdev, 1);
-
-				if ( spigot1 && spigot2 && raidon )
-					{
-					pdev->raid = 1;
-					if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-						pdev->spigot = 2;
-					else
-						pdev->spigot = 1;
-					if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
-						padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
-					}
-				else
-					{
-					if ( spigot1 )
-						{
-						if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-							goto unregister;
-						pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR;
-						pdev->spigot = 1;
-						}
-					else
-						{
-						if ( pdev->DiskMirror[1].status & UCBF_REBUILD )
-							goto unregister;
-						pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR;
-						pdev->spigot = 2;
-						}
-					if ( DaleSetup.rebootRebuild && raidon )
-						padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
-					}
-			
-				if ( raidon )
-					break;
-				}
-			}
-
-		SetupFinish (padapter, "2220", pshost->irq);
-	
-		if ( ++Installed < MAXADAPTER )
-			continue;
-		break;
-unregister:;
-		scsi_unregister (pshost);
-		}
-
-	while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_BIGD_1, pcidev)) != NULL )
-		{
-		pshost = scsi_register (tpnt, sizeof(ADAPTER2220I));
-		padapter = HOSTDATA(pshost);
-
-		if ( GetRegs (pshost, TRUE, pcidev) )
-			goto unregister1;
-
-		for ( z = 0;  z < BIGD_MAXDRIVES;  z++ )
-			DiskMirror[z].status = inb_p (padapter->regScratchPad + BIGD_RAID_0_STATUS + z);		
-
-		scsi_set_pci_device(pshost, pcidev);
-		pshost->max_id = padapter->numberOfDrives;
-		padapter->failRegister = inb_p (padapter->regScratchPad + BIGD_ALARM_IMAGE);
-		for ( z = 0;  z < padapter->numberOfDrives;  z++ )
-			{
-			unit = inb_p (padapter->regScratchPad + BIGD_DEVICE_0 + z);
-			pdev = &padapter->device[z];
-			pdev->byte6		= (UCHAR)(((unit & 1) << 4) | 0xE0);
-			pdev->spigot	= (UCHAR)(1 << (unit >> 1));
-			pdev->sectors	= DaleSetup.setupDevice[unit].sectors;
-			pdev->heads		= DaleSetup.setupDevice[unit].heads;
-			pdev->cylinders = DaleSetup.setupDevice[unit].cylinders;
-			pdev->blocks	= DaleSetup.setupDevice[unit].blocks;
-			
-			if ( (DiskMirror[unit].signature == SIGNATURE) && (DiskMirror[unit ^ 2].signature == SIGNATURE) &&
-			     (DiskMirror[unit].pairIdentifier == (DiskMirror[unit ^ 2].pairIdentifier ^ 1)) )
-				{			 
-				raidon = TRUE;
-				if ( unit > (unit ^ 2) )
-					unit = unit ^ 2;
-				}	
-			else
-				raidon = FALSE;
-				
-			spigot1 = spigot2 = FALSE;
-			memcpy (&pdev->DiskMirror[0], &DiskMirror[unit], sizeof (DISK_MIRROR));
-			memcpy (&pdev->DiskMirror[1], &DiskMirror[unit ^ 2], sizeof (DISK_MIRROR));
-			padapter->raidData[unit]	 = &pdev->DiskMirror[0];
-			padapter->raidData[unit ^ 2] = &pdev->DiskMirror[1];
-			pdev->spigots[0] = 1 << (unit >> 1);
-			pdev->spigots[1] = 1 << ((unit ^ 2) >> 1);
-			pdev->deviceID[0] = unit;
-			pdev->deviceID[1] = unit ^ 2;
-			pdev->lastsectorlba[0] = InlineIdentify (padapter, pdev->spigots[0], unit & 1);
-			pdev->lastsectorlba[1] = InlineIdentify (padapter, pdev->spigots[1], unit & 1);
-
-			if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] )
-				spigot1 = TRUE;
-			if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] )
-				spigot2 = TRUE;
-			if ( pdev->DiskMirror[0].status & pdev->DiskMirror[1].status & UCBF_SURVIVOR )
-				spigot1 = TRUE;
-
-			if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) )
-				InlineReadSignature (padapter, pdev, 0);
-			if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) )
-				InlineReadSignature (padapter, pdev, 1);
-
-			if ( spigot1 && spigot2 && raidon )
-				{
-				pdev->raid = 1;
-				if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-					pdev->spigot = pdev->spigots[1];
-				else
-					pdev->spigot = pdev->spigots[0];
-				if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
-					padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
-				}
-			else
-				{
-				if ( spigot1 )
-					{
-					if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
-						goto unregister1;
-					pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR;
-					pdev->spigot = pdev->spigots[0];
-					}
-				else
-					{
-					if ( pdev->DiskMirror[1].status & UCBF_REBUILD )
-						goto unregister;
-					pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR;
-					pdev->spigot = pdev->spigots[1];
-					}
-				if ( DaleSetup.rebootRebuild && raidon )
-					padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
-				}
-			}
-		
-		if ( !padapter->numberOfDrives )									// If no ATA devices then scan ATAPI
-			{
-			unit = 0;
-			for ( spigot1 = 0;  spigot1 < 4;  spigot1++ )
-				{
-				for ( device = 0;  device < 2;  device++ )
-					{
-					DEB (printk ("\nPCI2242I: scanning for ID %d ", (spigot1 * 2) + device));
-					pdev = &(padapter->device[(spigot1 * 2) + device]);
-					pdev->byte6 = 0x0A | (device << 4);
-					pdev->spigot = 1 << spigot1;
-					if ( !AtapiReset (padapter, pdev) )
-						{
-						DEB (printk (" Device found "));
-						if ( !AtapiIdentify (padapter, pdev) )
-							{
-							DEB (printk (" Device verified"));
-							unit++;
-							continue;
-							}
-						}
-					pdev->spigot = pdev->byte6 = 0;
-					}
-				}
-
-			if ( unit )
-				{
-				padapter->atapi = TRUE;
-				padapter->timingAddress = DALE_DATA_MODE3;
-				outw_p (0x0900, padapter->regIrqControl);					// Turn our interrupts on
-				outw_p (0x0C41, padapter->regDmaMode - 1);					// setup for 16 bits, ready enabled, done IRQ enabled, no incriment
-				outb_p (0xFF, padapter->regFail);							// all fail lights and alarm off
-				pshost->max_id = 8;
-				}
-			}
-		SetupFinish (padapter, "2240", pshost->irq);
-		
-		if ( ++Installed < MAXADAPTER )
-			continue;
-		break;
-unregister1:;
-		scsi_unregister (pshost);
-		}
-
-	NumAdapters = Installed;
-	return Installed;
-	}
-/****************************************************************
- *	Name:	Pci2220i_Abort
- *
- *	Description:	Process the Abort command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *
- *	Returns:		Allways snooze.
- *
- ****************************************************************/
-int Pci2220i_Abort (Scsi_Cmnd *SCpnt)
-	{
-	PADAPTER2220I	padapter = HOSTDATA(SCpnt->device->host);			// Pointer to adapter control structure
-	POUR_DEVICE		pdev	 = &padapter->device[SCpnt->device->id];// Pointer to device information
-
-	if ( !padapter->SCpnt )
-		return SCSI_ABORT_NOT_RUNNING;
-	
-	if ( padapter->atapi )
-		{
-		if ( AtapiReset (padapter, pdev) )
-			return SCSI_ABORT_ERROR;
-		OpDone (padapter, DID_ABORT << 16);
-		return SCSI_ABORT_SUCCESS;
-		}
-	return SCSI_ABORT_SNOOZE;
-	}
-/****************************************************************
- *	Name:	Pci2220i_Reset
- *
- *	Description:	Process the Reset command from the SCSI manager.
- *
- *	Parameters:		SCpnt - Pointer to SCSI command structure.
- *					flags - Flags about the reset command
- *
- *	Returns:		No active command at this time, so this means
- *					that each time we got some kind of response the
- *					last time through.  Tell the mid-level code to
- *					request sense information in order to decide what
- *					to do next.
- *
- ****************************************************************/
-int Pci2220i_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags)
-	{
-	PADAPTER2220I	padapter = HOSTDATA(SCpnt->device->host);			// Pointer to adapter control structure
-	POUR_DEVICE		pdev	 = &padapter->device[SCpnt->device->id];// Pointer to device information
-
-	if ( padapter->atapi )
-		{
-		if ( AtapiReset (padapter, pdev) )
-			return SCSI_RESET_ERROR;
-		return SCSI_RESET_SUCCESS;
-		}
-	return SCSI_RESET_PUNT;
-	}
-/****************************************************************
- *	Name:	Pci2220i_Release
- *
- *	Description:	Release resources allocated for a single each adapter.
- *
- *	Parameters:		pshost - Pointer to SCSI command structure.
- *
- *	Returns:		zero.
- *
- ****************************************************************/
-int Pci2220i_Release (struct Scsi_Host *pshost)
-	{
-    PADAPTER2220I	padapter = HOSTDATA (pshost);
-	USHORT			z;
-
-	if ( padapter->reconOn )
-		{
-		padapter->reconOn = FALSE;						// shut down the hot reconstruct
-		if ( padapter->reconPhase )
-			mdelay (300);
-		if ( padapter->reconTimer.data )				// is the timer running?
-			{
-			del_timer (&padapter->reconTimer);
-			padapter->reconTimer.data = 0;
-			}
-		}
-
-	// save RAID status on the board
-	if ( padapter->bigD )
-		{
-		outb_p (padapter->failRegister, padapter->regScratchPad + BIGD_ALARM_IMAGE);
-		for ( z = 0;  z < BIGD_MAXDRIVES;  z++ )
-			{
-			if ( padapter->raidData )
-				outb_p (padapter->raidData[z]->status, padapter->regScratchPad + BIGD_RAID_0_STATUS + z);	
-			else
-				outb_p (0, padapter->regScratchPad + BIGD_RAID_0_STATUS);	
-			}
-		}
-	else
-		{
-		outb_p (padapter->device[0].DiskMirror[0].status, padapter->regScratchPad + DALE_RAID_0_STATUS);		
-		outb_p (padapter->device[0].DiskMirror[1].status, padapter->regScratchPad + DALE_RAID_1_STATUS);		
-		}
-
-	if ( padapter->irqOwned )
-		free_irq (pshost->irq, padapter);
-    release_region (pshost->io_port, pshost->n_io_port);
-	if ( padapter->numberOfDrives )
-		pci_free_consistent (padapter->pcidev, SECTORSXFER * BYTES_PER_SECTOR, padapter->kBuffer, padapter->kBufferDma);
-	else	
-		pci_free_consistent (padapter->pcidev, ATAPI_TRANSFER, padapter->kBuffer, padapter->kBufferDma);
-    scsi_unregister(pshost);
-    return 0;
-	}
-
-/****************************************************************
- *	Name:	Pci2220i_BiosParam
- *
- *	Description:	Process the biosparam request from the SCSI manager to
- *					return C/H/S data.
- *
- *	Parameters:		disk - Pointer to SCSI disk structure.
- *					dev	 - Major/minor number from kernel.
- *					geom - Pointer to integer array to place geometry data.
- *
- *	Returns:		zero.
- *
- ****************************************************************/
-int Pci2220i_BiosParam (struct scsi_device *sdev, struct block_device *dev,
-		sector_t capacity, int geom[])
-	{
-	POUR_DEVICE	pdev;
-
-	if ( !(HOSTDATA(sdev->host))->atapi )
-		{
-		pdev = &(HOSTDATA(sdev->host)->device[sdev->id]);
-
-		geom[0] = pdev->heads;
-		geom[1] = pdev->sectors;
-		geom[2] = pdev->cylinders;
-		}
-	return 0;
-	}
-
-MODULE_LICENSE("Dual BSD/GPL");
-
-static Scsi_Host_Template driver_template = {
-	.proc_name		= "pci2220i",
-	.name			= "PCI-2220I/PCI-2240I",
-	.detect			= Pci2220i_Detect,
-	.release		= Pci2220i_Release,
-	.queuecommand		= Pci2220i_QueueCommand,
-	.abort			= Pci2220i_Abort,
-	.reset			= Pci2220i_Reset,
-	.bios_param		= Pci2220i_BiosParam,
-	.can_queue		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun		= 1,
-	.use_clustering		= DISABLE_CLUSTERING,
-};
-#include "scsi_module.c"
diff --git a/drivers/scsi/pci2220i.h b/drivers/scsi/pci2220i.h
deleted file mode 100644
index 6926056..0000000
--- a/drivers/scsi/pci2220i.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2220I device driver for Linux.
- *
- * pci2220i.h - Linux Host Driver for PCI-2220i EIDE Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2220I_H
-#define _PCI2220I_H
-
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif 
-#define	LINUXVERSION(v,p,s)    (((v)<<16) + ((p)<<8) + (s))
-
-// function prototypes
-int Pci2220i_Detect			(Scsi_Host_Template *tpnt);
-int Pci2220i_Command		(Scsi_Cmnd *SCpnt);
-int Pci2220i_QueueCommand	(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2220i_Abort			(Scsi_Cmnd *SCpnt);
-int Pci2220i_Reset			(Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2220i_Release		(struct Scsi_Host *pshost);
-int Pci2220i_BiosParam		(struct scsi_device *sdev,
-					struct block_device *dev,
-					sector_t capacity, int geom[]);
-#endif
diff --git a/drivers/scsi/psi_dale.h b/drivers/scsi/psi_dale.h
deleted file mode 100644
index d672e3b..0000000
--- a/drivers/scsi/psi_dale.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2220I device driver for Linux.
- *
- * psi_dalei.h - Linux Host Driver for PCI-2220i EIDE Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-
-/************************************************/
-/*		Some defines that we like 				*/
-/************************************************/
-#define	CHAR		char
-#define	UCHAR		unsigned char
-#define	SHORT		short
-#define	USHORT		unsigned short
-#define	BOOL		unsigned short
-#define	LONG		long
-#define	ULONG		unsigned long
-#define	VOID		void
-
-/************************************************/
-/*		Dale PCI setup							*/
-/************************************************/
-#define	VENDOR_PSI			0x1256
-#define	DEVICE_DALE_1		0x4401		/* 'D1' */
-#define	DEVICE_BIGD_1		0x4201		/* 'B1' */
-#define	DEVICE_BIGD_2		0x4202		/* 'B2' */
-
-/************************************************/
-/*		Misc konstants							*/
-/************************************************/
-#define	DALE_MAXDRIVES			4
-#define	BIGD_MAXDRIVES			8
-#define	SECTORSXFER				8
-#define	ATAPI_TRANSFER			8192
-#define	BYTES_PER_SECTOR		512
-#define	DEFAULT_TIMING_MODE		5
-
-/************************************************/
-/*		EEPROM locations						*/
-/************************************************/
-#define	DALE_FLASH_PAGE_SIZE	128				// number of bytes per page
-#define	DALE_FLASH_SIZE			65536L
-
-#define	DALE_FLASH_BIOS			0x00080000L		// BIOS base address
-#define	DALE_FLASH_SETUP		0x00088000L		// SETUP PROGRAM base address offset from BIOS
-#define	DALE_FLASH_RAID			0x00088400L		// RAID signature storage
-#define	DALE_FLASH_FACTORY		0x00089000L		// FACTORY data base address offset from BIOS
-
-#define	DALE_FLASH_BIOS_SIZE	32768U			// size of FLASH BIOS REGION
-
-/************************************************/
-/*		DALE Register address offsets			*/
-/************************************************/
-#define	REG_DATA					0x80
-#define	REG_ERROR					0x84
-#define	REG_SECTOR_COUNT			0x88
-#define	REG_LBA_0					0x8C
-#define	REG_LBA_8					0x90
-#define	REG_LBA_16					0x94
-#define	REG_LBA_24					0x98
-#define	REG_STAT_CMD				0x9C
-#define	REG_STAT_SEL				0xA0
-#define	REG_FAIL					0xB0
-#define	REG_ALT_STAT				0xB8
-#define	REG_DRIVE_ADRS				0xBC
-
-#define	DALE_DATA_SLOW				0x00040000L
-#define	DALE_DATA_MODE2				0x00040000L
-#define	DALE_DATA_MODE3				0x00050000L
-#define	DALE_DATA_MODE4				0x00060000L
-#define	DALE_DATA_MODE5				0x00070000L
-
-#define	BIGD_DATA_SLOW				0x00000000L
-#define	BIGD_DATA_MODE0				0x00000000L
-#define	BIGD_DATA_MODE2				0x00000000L
-#define	BIGD_DATA_MODE3				0x00000008L
-#define	BIGD_DATA_MODE4				0x00000010L
-#define	BIGD_DATA_MODE5				0x00000020L
-
-#define RTR_LOCAL_RANGE				0x000
-#define RTR_LOCAL_REMAP				0x004
-#define RTR_EXP_RANGE				0x010
-#define RTR_EXP_REMAP				0x014
-#define RTR_REGIONS					0x018
-#define RTR_DM_MASK					0x01C
-#define RTR_DM_LOCAL_BASE			0x020
-#define RTR_DM_IO_BASE				0x024
-#define RTR_DM_PCI_REMAP			0x028
-#define RTR_DM_IO_CONFIG			0x02C
-#define RTR_MAILBOX					0x040
-#define RTR_LOCAL_DOORBELL			0x060
-#define RTR_PCI_DOORBELL			0x064
-#define RTR_INT_CONTROL_STATUS 		0x068
-#define RTR_EEPROM_CONTROL_STATUS	0x06C
-
-#define RTR_DMA0_MODE				0x0080
-#define RTR_DMA0_PCI_ADDR			0x0084
-#define RTR_DMA0_LOCAL_ADDR			0x0088
-#define RTR_DMA0_COUNT				0x008C
-#define RTR_DMA0_DESC_PTR			0x0090
-#define RTR_DMA1_MODE				0x0094
-#define RTR_DMA1_PCI_ADDR			0x0098
-#define RTR_DMA1_LOCAL_ADDR			0x009C
-#define RTR_DMA1_COUNT				0x00A0
-#define RTR_DMA1_DESC_PTR			0x00A4
-#define RTR_DMA_COMMAND_STATUS		0x00A8
-#define RTR_DMA_ARB0				0x00AC
-#define RTR_DMA_ARB1				0x00B0
-
-#define RTL_DMA0_MODE				0x00
-#define RTL_DMA0_PCI_ADDR			0x04
-#define RTL_DMA0_LOCAL_ADDR			0x08
-#define RTL_DMA0_COUNT				0x0C
-#define RTL_DMA0_DESC_PTR			0x10
-#define RTL_DMA1_MODE				0x14
-#define RTL_DMA1_PCI_ADDR			0x18
-#define RTL_DMA1_LOCAL_ADDR			0x1C
-#define RTL_DMA1_COUNT				0x20
-#define RTL_DMA1_DESC_PTR			0x24
-#define RTL_DMA_COMMAND_STATUS		0x28
-#define RTL_DMA_ARB0				0x2C
-#define RTL_DMA_ARB1				0x30
-
-/************************************************/
-/*		Dale Scratchpad locations				*/
-/************************************************/
-#define	DALE_CHANNEL_DEVICE_0		0		// device channel locations
-#define	DALE_CHANNEL_DEVICE_1		1
-#define	DALE_CHANNEL_DEVICE_2		2
-#define	DALE_CHANNEL_DEVICE_3		3
-
-#define	DALE_SCRATCH_DEVICE_0		4		// device type codes
-#define	DALE_SCRATCH_DEVICE_1		5
-#define DALE_SCRATCH_DEVICE_2		6
-#define	DALE_SCRATCH_DEVICE_3		7
-
-#define	DALE_RAID_0_STATUS			8
-#define DALE_RAID_1_STATUS			9
-
-#define	DALE_TIMING_MODE			12		// bus master timing mode (2, 3, 4, 5)
-#define	DALE_NUM_DRIVES				13		// number of addressable drives on this board
-#define	DALE_RAID_ON				14 		// RAID status On
-#define	DALE_LAST_ERROR				15		// Last error code from BIOS
-
-/************************************************/
-/*		BigD Scratchpad locations				*/
-/************************************************/
-#define	BIGD_DEVICE_0			0		// device channel locations
-#define	BIGD_DEVICE_1			1
-#define	BIGD_DEVICE_2			2
-#define	BIGD_DEVICE_3			3
-
-#define	BIGD_DEVICE_4			4		// device type codes
-#define	BIGD_DEVICE_5			5
-#define BIGD_DEVICE_6			6
-#define	BIGD_DEVICE_7			7
-
-#define	BIGD_ALARM_IMAGE		11		// ~image of alarm fail register		
-#define	BIGD_TIMING_MODE		12		// bus master timing mode (2, 3, 4, 5)
-#define	BIGD_NUM_DRIVES			13		// number of addressable drives on this board
-#define	BIGD_RAID_ON			14 		// RAID status is on for the whole board
-#define	BIGD_LAST_ERROR			15		// Last error code from BIOS
-
-#define	BIGD_RAID_0_STATUS		16
-#define BIGD_RAID_1_STATUS		17
-#define	BIGD_RAID_2_STATUS		18
-#define	BIGD_RAID_3_STATUS		19
-#define	BIGD_RAID_4_STATUS		20
-#define BIGD_RAID_5_STATUS		21
-#define	BIGD_RAID_6_STATUS		22
-#define	BIGD_RAID_7_STATUS		23
-
-/************************************************/
-/*		Dale cable select bits					*/
-/************************************************/
-#define	SEL_NONE					0x00
-#define	SEL_1						0x01
-#define	SEL_2						0x02
-#define	SEL_3						0x04
-#define	SEL_4						0x08
-#define	SEL_NEW_SPEED_1				0x20
-#define	SEL_COPY					0x40
-#define	SEL_IRQ_OFF					0x80
-
-/************************************************/
-/*		Device/Geometry controls				*/
-/************************************************/
-#define GEOMETRY_NONE	 			0x0				// No device
-#define GEOMETRY_SET				0x1				// Geometry set
-#define	GEOMETRY_LBA				0x2				// Geometry set in default LBA mode
-#define	GEOMETRY_PHOENIX			0x3				// Geometry set in Pheonix BIOS compatibility mode
-
-#define	DEVICE_NONE					0x0				// No device present
-#define	DEVICE_INACTIVE				0x1				// device present but not registered active
-#define	DEVICE_ATAPI				0x2				// ATAPI device (CD_ROM, Tape, Etc...)
-#define	DEVICE_DASD_NONLBA			0x3				// Non LBA incompatible device
-#define	DEVICE_DASD_LBA				0x4				// LBA compatible device
-
-/************************************************/
-/*		BigD fail register bits					*/
-/************************************************/
-#define	FAIL_NONE				0x00
-#define	FAIL_0					0x01
-#define	FAIL_1					0x02
-#define	FAIL_2					0x04
-#define	FAIL_MULTIPLE			0x08
-#define	FAIL_GOOD				0x20
-#define	FAIL_AUDIBLE			0x40
-#define	FAIL_ANY				0x80
-
-/************************************************/
-/*		Setup Structure Definitions				*/
-/************************************************/
-typedef struct		// device setup parameters
-	{
-	UCHAR	geometryControl;	// geometry control flags
-	UCHAR	device;				// device code
-	USHORT	sectors;			// number of sectors per track
-	USHORT	heads;				// number of heads
-	USHORT	cylinders;			// number of cylinders for this device
-	ULONG	blocks;				// number of blocks on device
-	ULONG	realCapacity;		// number of real blocks on this device for drive changed testing
-	} SETUP_DEVICE, *PSETUP_DEVICE;
-
-typedef struct		// master setup structure
-	{
-	USHORT			startupDelay;
-	BOOL			promptBIOS;
-	BOOL			fastFormat;
-	BOOL			shareInterrupt;
-	BOOL			rebootRebuild;
-	USHORT			timingMode;
-	USHORT			spare5;
-	USHORT			spare6;
-	SETUP_DEVICE	setupDevice[BIGD_MAXDRIVES];
-	}	SETUP, *PSETUP;
-
-/************************************************/
-/*		RAID Structure Definitions				*/
-/************************************************/
-typedef	struct
-	{
-	UCHAR	signature;			// 0x55 our mirror signature
-	UCHAR	status;				// current status bits
-	UCHAR	pairIdentifier;		// unique identifier for pair
-	ULONG	reconstructPoint;	// recontruction point for hot reconstruct
-	}	DISK_MIRROR;
-
-typedef struct	DEVICE_RAID1
-	{
-	long		TotalSectors;
-	DISK_MIRROR DiskRaid1;
-	}	DEVICE_RAID1, *PDEVICE_RAID1;
-
-#define	DISK_MIRROR_POSITION	0x01A8
-#define	SIGNATURE				0x55
-
-#define	MASK_SERIAL_NUMBER	0x0FFE			// mask for serial number matching
-#define	MASK_SERIAL_UNIT	0x0001			// mask for unit portion of serial number
-
-// Status bits
-#define	UCBF_MIRRORED		0x0010								// drive has a pair
-#define	UCBF_MATCHED		0x0020								// drive pair is matched
-#define	UCBF_SURVIVOR		0x0040								// this unit is a survivor of a pair
-#define	UCBF_REBUILD		0x0080								// rebuild in progress on this device
-
-// SCSI controls for RAID
-#define	SC_MY_RAID			0xBF			// our special CDB command byte for Win95... interface
-#define	MY_SCSI_QUERY1		0x32			// byte 1 subcommand to query driver for RAID 1 informatation
-#define	MY_SCSI_REBUILD		0x40			// byte 1 subcommand to reconstruct a mirrored pair
-#define MY_SCSI_DEMOFAIL	0x54			// byte 1 subcommand for RAID failure demonstration
-#define	MY_SCSI_ALARMMUTE	0x60			// byte 1 subcommand to mute any alarm currently on
-
-/************************************************/
-/*		Timeout konstants		 				*/
-/************************************************/
-#define	TIMEOUT_READY				100			// 100 mSec
-#define	TIMEOUT_DRQ					300			// 300 mSec
-#define	TIMEOUT_DATA				(3 * HZ)	// 3 seconds
-
-/************************************************/
-/*		Misc. macros			 				*/
-/************************************************/
-#define ANY2SCSI(up, p)					\
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8);	\
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up)					\
-( (((long)*(((UCHAR *)up))) << 16)		\
-+ (((long)(((UCHAR *)up)[1])) << 8)		\
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p)				\
-((UCHAR *)up)[0] = ((long)(p)) >> 24;	\
-((UCHAR *)up)[1] = ((long)(p)) >> 16;	\
-((UCHAR *)up)[2] = ((long)(p)) >> 8;	\
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up)					\
-( (((long)(((UCHAR *)up)[0])) << 24)	\
-+ (((long)(((UCHAR *)up)[1])) << 16)	\
-+ (((long)(((UCHAR *)up)[2])) <<  8)	\
-+ ((long)(((UCHAR *)up)[3])) )
-
-#define	SelectSpigot(padapter,spigot)	outb_p (spigot, padapter->regStatSel)
-#define WriteCommand(padapter,cmd)		outb_p (cmd, padapter->regStatCmd)
-#define	AtapiDevice(padapter,b)			outb_p (b, padapter->regLba24);
-#define	AtapiCountLo(padapter,b)		outb_p (b, padapter->regLba8)
-#define	AtapiCountHi(padapter,b)		outb_p (b, padapter->regLba16)
-
-/************************************************/
-/*		SCSI CDB operation codes 				*/
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY		0x00
-#define SCSIOP_REZERO_UNIT			0x01
-#define SCSIOP_REWIND				0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR	0x02
-#define SCSIOP_REQUEST_SENSE		0x03
-#define SCSIOP_FORMAT_UNIT			0x04
-#define SCSIOP_READ_BLOCK_LIMITS	0x05
-#define SCSIOP_REASSIGN_BLOCKS		0x07
-#define SCSIOP_READ6				0x08
-#define SCSIOP_RECEIVE				0x08
-#define SCSIOP_WRITE6				0x0A
-#define SCSIOP_PRINT				0x0A
-#define SCSIOP_SEND					0x0A
-#define SCSIOP_SEEK6				0x0B
-#define SCSIOP_TRACK_SELECT			0x0B
-#define SCSIOP_SLEW_PRINT			0x0B
-#define SCSIOP_SEEK_BLOCK			0x0C
-#define SCSIOP_PARTITION			0x0D
-#define SCSIOP_READ_REVERSE			0x0F
-#define SCSIOP_WRITE_FILEMARKS		0x10
-#define SCSIOP_FLUSH_BUFFER			0x10
-#define SCSIOP_SPACE				0x11
-#define SCSIOP_INQUIRY				0x12
-#define SCSIOP_VERIFY6				0x13
-#define SCSIOP_RECOVER_BUF_DATA		0x14
-#define SCSIOP_MODE_SELECT			0x15
-#define SCSIOP_RESERVE_UNIT			0x16
-#define SCSIOP_RELEASE_UNIT			0x17
-#define SCSIOP_COPY					0x18
-#define SCSIOP_ERASE				0x19
-#define SCSIOP_MODE_SENSE			0x1A
-#define SCSIOP_START_STOP_UNIT		0x1B
-#define SCSIOP_STOP_PRINT			0x1B
-#define SCSIOP_LOAD_UNLOAD			0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC	0x1C
-#define SCSIOP_SEND_DIAGNOSTIC		0x1D
-#define SCSIOP_MEDIUM_REMOVAL		0x1E
-#define SCSIOP_READ_CAPACITY		0x25
-#define SCSIOP_READ					0x28
-#define SCSIOP_WRITE				0x2A
-#define SCSIOP_SEEK					0x2B
-#define SCSIOP_LOCATE				0x2B
-#define SCSIOP_WRITE_VERIFY			0x2E
-#define SCSIOP_VERIFY				0x2F
-#define SCSIOP_SEARCH_DATA_HIGH		0x30
-#define SCSIOP_SEARCH_DATA_EQUAL	0x31
-#define SCSIOP_SEARCH_DATA_LOW		0x32
-#define SCSIOP_SET_LIMITS			0x33
-#define SCSIOP_READ_POSITION		0x34
-#define SCSIOP_SYNCHRONIZE_CACHE	0x35
-#define SCSIOP_COMPARE				0x39
-#define SCSIOP_COPY_COMPARE			0x3A
-#define SCSIOP_WRITE_DATA_BUFF		0x3B
-#define SCSIOP_READ_DATA_BUFF		0x3C
-#define SCSIOP_CHANGE_DEFINITION	0x40
-#define SCSIOP_READ_SUB_CHANNEL		0x42
-#define SCSIOP_READ_TOC				0x43
-#define SCSIOP_READ_HEADER			0x44
-#define SCSIOP_PLAY_AUDIO			0x45
-#define SCSIOP_PLAY_AUDIO_MSF		0x47
-#define SCSIOP_PLAY_TRACK_INDEX		0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE	0x49
-#define SCSIOP_PAUSE_RESUME			0x4B
-#define SCSIOP_LOG_SELECT			0x4C
-#define SCSIOP_LOG_SENSE			0x4D
-#define SCSIOP_MODE_SELECT10		0x55
-#define SCSIOP_MODE_SENSE10			0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT		0xA6
-#define SCSIOP_MECHANISM_STATUS		0xBD
-#define SCSIOP_READ_CD				0xBE
-
-// IDE command definitions
-#define IDE_COMMAND_ATAPI_RESET		0x08
-#define IDE_COMMAND_READ			0x20
-#define IDE_COMMAND_WRITE			0x30
-#define IDE_COMMAND_RECALIBRATE		0x10
-#define IDE_COMMAND_SEEK			0x70
-#define IDE_COMMAND_SET_PARAMETERS	0x91
-#define IDE_COMMAND_VERIFY			0x40
-#define IDE_COMMAND_ATAPI_PACKET	0xA0
-#define IDE_COMMAND_ATAPI_IDENTIFY	0xA1
-#define	IDE_CMD_READ_MULTIPLE		0xC4
-#define	IDE_CMD_WRITE_MULTIPLE		0xC5
-#define	IDE_CMD_SET_MULTIPLE		0xC6
-#define IDE_COMMAND_IDENTIFY		0xEC
-
-// IDE status definitions
-#define IDE_STATUS_ERROR			0x01
-#define IDE_STATUS_INDEX			0x02
-#define IDE_STATUS_CORRECTED_ERROR	0x04
-#define IDE_STATUS_DRQ				0x08
-#define IDE_STATUS_DSC				0x10
-#define	IDE_STATUS_WRITE_FAULT		0x20
-#define IDE_STATUS_DRDY				0x40
-#define IDE_STATUS_BUSY				0x80
-
-typedef struct _ATAPI_STATUS
-	{
-	CHAR	check		:1;
-	CHAR	reserved1	:1;
-	CHAR	corr		:1;
-	CHAR	drq			:1;
-	CHAR	dsc			:1;
-	CHAR	reserved2	:1;
-	CHAR	drdy		:1;
-	CHAR	bsy			:1;
-	}	ATAPI_STATUS;
-
-typedef struct _ATAPI_REASON
-	{
-	CHAR	cod			:1;
-	CHAR	io			:1;
-	CHAR	reserved1	:6;
-	}	ATAPI_REASON;
-
-typedef struct _ATAPI_ERROR
-	{
-	CHAR	ili			:1;
-	CHAR	eom			:1;
-	CHAR	abort		:1;
-	CHAR	mcr			:1;
-	CHAR	senseKey	:4;
-	}	ATAPI_ERROR;
-
-// IDE error definitions
-#define	IDE_ERROR_AMNF				0x01
-#define	IDE_ERROR_TKONF				0x02
-#define	IDE_ERROR_ABRT				0x04
-#define	IDE_ERROR_MCR				0x08
-#define	IDE_ERROR_IDFN				0x10
-#define	IDE_ERROR_MC				0x20
-#define	IDE_ERROR_UNC				0x40
-#define	IDE_ERROR_BBK				0x80
-
-// SCSI read capacity structure
-typedef	struct _READ_CAPACITY_DATA
-	{
-	ULONG blks;				/* total blocks (converted to little endian) */
-	ULONG blksiz;			/* size of each (converted to little endian) */
-	}	READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
-	{
-	UCHAR DeviceType			:5;
-	UCHAR DeviceTypeQualifier	:3;
-	UCHAR DeviceTypeModifier	:7;
-	UCHAR RemovableMedia		:1;
-    UCHAR Versions;
-    UCHAR ResponseDataFormat;
-    UCHAR AdditionalLength;
-    UCHAR Reserved[2];
-	UCHAR SoftReset				:1;
-	UCHAR CommandQueue			:1;
-	UCHAR Reserved2				:1;
-	UCHAR LinkedCommands		:1;
-	UCHAR Synchronous			:1;
-	UCHAR Wide16Bit				:1;
-	UCHAR Wide32Bit				:1;
-	UCHAR RelativeAddressing	:1;
-    UCHAR VendorId[8];
-    UCHAR ProductId[16];
-    UCHAR ProductRevisionLevel[4];
-    UCHAR VendorSpecific[20];
-    UCHAR Reserved3[40];
-	}	INQUIRYDATA, *PINQUIRYDATA;
-
-// IDE IDENTIFY data
-#pragma pack (1)
-typedef struct _IDENTIFY_DATA
-	{
-    USHORT	GeneralConfiguration;		//  0
-    USHORT	NumberOfCylinders;			//  1
-    USHORT	Reserved1;					//  2
-    USHORT	NumberOfHeads;				//  3
-    USHORT	UnformattedBytesPerTrack;	//  4
-    USHORT	UnformattedBytesPerSector;	//  5
-    USHORT	SectorsPerTrack;			//  6
-	USHORT	NumBytesISG;				//  7 Byte Len - inter-sector gap
-	USHORT	NumBytesSync;				//  8          - sync field
-	USHORT	NumWordsVUS;				//  9 Len - Vendor Unique Info
-    USHORT	SerialNumber[10];			// 10
-    USHORT	BufferType;					// 20
-    USHORT	BufferSectorSize;			// 21
-    USHORT	NumberOfEccBytes;			// 22
-    USHORT	FirmwareRevision[4];		// 23
-    USHORT	ModelNumber[20];			// 27
-	USHORT	NumSectorsPerInt	:8;		// 47 Multiple Mode - Sec/Blk
-	USHORT	Reserved2			:8;		// 47
-	USHORT	DoubleWordMode;				// 48 flag for double word mode capable
-	USHORT	VendorUnique1		:8;		// 49
-	USHORT	SupportDMA			:1;		// 49 DMA supported
-	USHORT	SupportLBA			:1;		// 49 LBA supported
-	USHORT	SupportIORDYDisable	:1;		// 49 IORDY can be disabled
-	USHORT	SupportIORDY		:1;		// 49 IORDY supported
-	USHORT	ReservedPsuedoDMA	:1;		// 49 reserved for pseudo DMA mode support
-	USHORT	Reserved3			:3;		// 49
-	USHORT	Reserved4;					// 50
-	USHORT	Reserved5			:8;		// 51 Transfer Cycle Timing - PIO
-	USHORT	PIOCycleTime		:8;		// 51 Transfer Cycle Timing - PIO
-	USHORT	Reserved6			:8;		// 52                       - DMA
-	USHORT	DMACycleTime		:8;		// 52                       - DMA
-	USHORT	Valid_54_58			:1;		// 53 words 54 - 58 are valid
-	USHORT	Valid_64_70			:1;		// 53 words 64 - 70 are valid
-	USHORT	Reserved7			:14;	// 53
-	USHORT	LogNumCyl;					// 54 Current Translation - Num Cyl
-	USHORT	LogNumHeads;				// 55                       Num Heads
-	USHORT	LogSectorsPerTrack;			// 56                       Sec/Trk
-	ULONG	LogTotalSectors;			// 57                       Total Sec
-	USHORT	CurrentNumSecPerInt	:8;		// 59 current setting for number of sectors per interrupt
-	USHORT	ValidNumSecPerInt	:1;		// 59 Current setting is valid for number of sectors per interrupt
-	USHORT	Reserved8			:7;		// 59
-	ULONG	LBATotalSectors;			// 60 LBA Mode - Sectors
-	USHORT	DMASWordFlags;				// 62
-	USHORT	DMAMWordFlags;				// 63
-	USHORT	AdvancedPIOSupport  :8;		// 64 Flow control PIO transfer modes supported
-	USHORT	Reserved9			:8;		// 64
-	USHORT	MinMultiDMACycle;			// 65 minimum multiword DMA transfer cycle time per word
-	USHORT	RecomendDMACycle;			// 66 Manufacturer's recommende multiword DMA transfer cycle time
-	USHORT	MinPIOCycleWithoutFlow;		// 67 Minimum PIO transfer cycle time without flow control
-	USHORT	MinPIOCylceWithFlow;		// 68 Minimum PIO transfer cycle time with IORDY flow control
-	USHORT	ReservedSpace[256-69];		// 69
-	}	IDENTIFY_DATA, *PIDENTIFY_DATA;
-
-// ATAPI configuration bits
-typedef struct _ATAPI_GENERAL_0
-	{
-	USHORT	CmdPacketSize		:2;		// Command packet size
-	USHORT	Reserved1			:3;
-	USHORT	CmdDrqType			:2;
-	USHORT	Removable			:1;
-	USHORT	DeviceType			:5;
-	USHORT	Reserved2			:1;
-	USHORT	ProtocolType		:2;
-	}	ATAPI_GENERAL_0;
-
-#pragma pack ()
diff --git a/drivers/scsi/psi_roy.h b/drivers/scsi/psi_roy.h
deleted file mode 100644
index c55b9c0..0000000
--- a/drivers/scsi/psi_roy.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * psi_roy.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-
-#ifndef	ROY_HOST
-#define	ROY_HOST
-
-/************************************************/
-/*		PCI setup								*/
-/************************************************/
-#define	VENDOR_PSI			0x1256
-#define	DEVICE_ROY_1		0x5201		/* 'R1' */
-
-/************************************************/
-/*		controller constants					*/
-/************************************************/
-#define MAXADAPTER			4			// Increase this and the sizes of the arrays below, if you need more.
-#define	MAX_BUS				2
-#define	MAX_UNITS			16
-#define	TIMEOUT_COMMAND		400			// number of milliSecondos for command busy timeout
-
-/************************************************/
-/*		I/O address offsets						*/
-/************************************************/
-#define RTR_MAILBOX						0x040
-#define RTR_LOCAL_DOORBELL				0x060
-#define RTR_PCI_DOORBELL				0x064
-
-/************************************************/
-/*												*/
-/*			Host command codes					*/
-/*												*/
-/************************************************/
-#define	CMD_READ_CHS		0x01		/* read sectors as specified (CHS mode) */
-#define	CMD_READ			0x02		/* read sectors as specified (RBA mode) */
-#define	CMD_READ_SG			0x03		/* read sectors using scatter/gather list */
-#define	CMD_WRITE_CHS		0x04		/* write sectors as specified (CHS mode) */
-#define	CMD_WRITE			0x05		/* write sectors as specified (RBA mode) */
-#define	CMD_WRITE_SG		0x06		/* write sectors using scatter/gather list (LBA mode) */
-#define	CMD_READ_CHS_SG		0x07		/* read sectors using scatter/gather list (CHS mode) */
-#define	CMD_WRITE_CHS_SG	0x08		/* write sectors using scatter/gather list (CHS mode) */
-#define	CMD_VERIFY_CHS		0x09		/* verify data on sectors as specified (CHS mode) */
-#define	CMD_VERIFY			0x0A		/* verify data on sectors as specified (RBA mode) */
-#define	CMD_DASD_CDB		0x0B		/* process CDB for a DASD device */
-#define	CMD_DASD_CDB_SG		0x0C		/* process CDB for a DASD device with scatter/gather */
-
-#define	CMD_READ_ABS		0x10		/* read absolute disk */
-#define	CMD_WRITE_ABS		0x11		/* write absolute disk */
-#define	CMD_VERIFY_ABS		0x12		/* verify absolute disk */
-#define	CMD_TEST_READY		0x13		/* test unit ready and return status code */
-#define	CMD_LOCK_DOOR		0x14		/* lock device door */
-#define	CMD_UNLOCK_DOOR		0x15		/* unlock device door */
-#define	CMD_EJECT_MEDIA		0x16		/* eject the media */
-#define	CMD_UPDATE_CAP		0x17		/* update capacity information */
-#define	CMD_TEST_PRIV		0x18		/* test and setup private format media */
-
-
-#define	CMD_SCSI_THRU		0x30		/* SCSI pass through CDB */
-#define	CMD_SCSI_THRU_SG	0x31		/* SCSI pass through CDB with scatter/gather */
-#define	CMD_SCSI_REQ_SENSE	0x32		/* SCSI pass through request sense after check condition */
-
-#define	CMD_DASD_RAID_RQ	0x35		/* request DASD RAID drive data */
-#define	CMD_DASD_RAID_RQ0	0x31			/* byte 1 subcommand to query for RAID 0 informatation */
-#define	CMD_DASD_RAID_RQ1	0x32			/* byte 1 subcommand to query for RAID 1 informatation */
-#define	CMD_DASD_RAID_RQ5	0x33			/* byte 1 subcommand to query for RAID 5 informatation */
-
-#define	CMD_DASD_SCSI_INQ	0x36		/* do DASD inquire and return in SCSI format */
-#define	CMD_DASD_CAP		0x37		/* read DASD capacity */
-#define	CMD_DASD_INQ		0x38		/* do DASD inquire for type data and return SCSI/EIDE inquiry */
-#define	CMD_SCSI_INQ		0x39		/* do SCSI inquire */
-#define	CMD_READ_SETUP		0x3A		/* Get setup structures from controller */
-#define	CMD_WRITE_SETUP		0x3B		/* Put setup structures in controller and burn in flash */
-#define	CMD_READ_CONFIG		0x3C		/* Get the entire configuration and setup structures */
-#define	CMD_WRITE_CONFIG	0x3D		/* Put the entire configuration and setup structures in flash */
-
-#define	CMD_TEXT_DEVICE		0x3E		/* obtain device text */
-#define	CMD_TEXT_SIGNON		0x3F		/* get sign on banner */
-
-#define	CMD_QUEUE			0x40		/* any command below this generates a queue tag interrupt to host*/
-
-#define	CMD_PREFETCH		0x40		/* prefetch sectors as specified */
-#define	CMD_TEST_WRITE		0x41		/* Test a device for write protect */
-#define	CMD_LAST_STATUS		0x42		/* get last command status and error data*/
-#define	CMD_ABORT			0x43		/* abort command as specified */
-#define	CMD_ERROR			0x44		/* fetch error code from a tagged op */
-#define	CMD_DONE			0x45		/* done with operation */
-#define	CMD_DIAGNOSTICS		0x46		/* execute controller diagnostics and wait for results */
-#define	CMD_FEATURE_MODE	0x47		/* feature mode control word */
-#define	CMD_DASD_INQUIRE	0x48		/* inquire as to DASD SCSI device (32 possible) */
-#define	CMD_FEATURE_QUERY	0x49		/* query the feature control word */
-#define	CMD_DASD_EJECT		0x4A		/* Eject removable media for DASD type */
-#define	CMD_DASD_LOCK		0x4B		/* Lock removable media for DASD type */
-#define	CMD_DASD_TYPE		0x4C		/* obtain DASD device type */
-#define	CMD_NUM_DEV			0x4D		/* obtain the number of devices connected to the controller */
-#define	CMD_GET_PARMS		0x4E		/* obtain device parameters */
-#define	CMD_SPECIFY			0x4F		/* specify operating system for scatter/gather operations */
-
-#define	CMD_RAID_GET_DEV	0x50		/* read RAID device geometry */
-#define CMD_RAID_READ		0x51		/* read RAID 1 parameter block */
-#define	CMD_RAID_WRITE		0x52		/* write RAID 1 parameter block */
-#define	CMD_RAID_LITEUP		0x53		/* Light up the drive light for identification */
-#define	CMD_RAID_REBUILD	0x54		/* issue a RAID 1 pair rebuild */
-#define	CMD_RAID_MUTE		0x55		/* mute RAID failure alarm */
-#define	CMD_RAID_FAIL		0x56		/* induce a RAID failure */
-#define	CMD_RAID_STATUS		0x57		/* get status of RAID pair */
-#define	CMD_RAID_STOP		0x58		/* stop any reconstruct in progress */
-#define CMD_RAID_START		0x59		/* start reconstruct */
-#define	CMD_RAID0_READ		0x5A		/* read RAID 0 parameter block */
-#define	CMD_RAID0_WRITE		0x5B		/* write RAID 0 parameter block */
-#define	CMD_RAID5_READ		0x5C		/* read RAID 5 parameter block */
-#define	CMD_RAID5_WRITE		0x5D		/* write RAID 5 parameter block */
-
-#define	CMD_ERASE_TABLES	0x5F		/* erase partition table and RAID signatutures */
-
-#define	CMD_SCSI_GET		0x60		/* get SCSI pass through devices */
-#define	CMD_SCSI_TIMEOUT	0x61		/* set SCSI pass through timeout */
-#define	CMD_SCSI_ERROR		0x62		/* get SCSI pass through request sense length and residual data count */
-#define	CMD_GET_SPARMS		0x63		/* get SCSI bus and user parms */
-#define	CMD_SCSI_ABORT		0x64		/* abort by setting time-out to zero */
-
-#define	CMD_CHIRP_CHIRP		0x77		/* make a chirp chirp sound */
-#define	CMD_GET_LAST_DONE	0x78		/* get tag of last done in progress */
-#define	CMD_GET_FEATURES	0x79		/* get feature code and ESN */
-#define CMD_CLEAR_CACHE		0x7A		/* Clear cache on specified device */
-#define	CMD_BIOS_TEST		0x7B		/* Test whether or not to load BIOS */
-#define	CMD_WAIT_FLUSH		0x7C		/* wait for cache flushed and invalidate read cache */
-#define	CMD_RESET_BUS		0x7D		/* reset the SCSI bus */
-#define	CMD_STARTUP_QRY		0x7E		/* startup in progress query */
-#define	CMD_RESET			0x7F		/* reset the controller */
-
-#define	CMD_RESTART_RESET	0x80		/* reload and restart the controller at any reset issued */
-#define	CMD_SOFT_RESET		0x81		/* do a soft reset NOW! */
-
-/************************************************/
-/*												*/
-/*				Host return errors				*/
-/*												*/
-/************************************************/
-#define	ERR08_TAGGED		0x80		/* doorbell error ored with tag */
-
-#define	ERR16_NONE			0x0000		/* no errors */
-#define	ERR16_SC_COND_MET	0x0004		/* SCSI status - Condition Met */
-#define	ERR16_CMD			0x0101		/* command error */
-#define	ERR16_SC_CHECK_COND	0x0002		/* SCSI status - Check Condition */
-#define	ERR16_CMD_NOT		0x0201		/* command not supported */
-#define ERR16_NO_DEVICE     0x0301		/* invalid device selection */
-#define	ERR16_SECTOR		0x0202		/* bad sector */
-#define	ERR16_PROTECT		0x0303		/* write protected */
-#define	ERR16_NOSECTOR		0x0404		/* sector not found */
-#define	ERR16_MEDIA			0x0C0C		/* invalid media */
-#define	ERR16_CONTROL		0x2020		/* controller error */
-#define	ERR16_CONTROL_DMA	0x2120		/* controller DMA engine error */
-#define	ERR16_NO_ALARM		0x2220		/* alarm is not active */
-#define	ERR16_OP_BUSY		0x2320		/* operation busy */
-#define	ERR16_SEEK			0x4040		/* seek failure */
-#define	ERR16_DEVICE_FAIL	0x4140		/* device has failed */
-#define ERR16_TIMEOUT		0x8080		/* timeout error */
-#define	ERR16_DEV_NOT_READY	0xAAAA		/* drive not ready */
-#define	ERR16_UNDEFINED		0xBBBB		/* undefined error */
-#define	ERR16_WRITE_FAULT	0xCCCC		/* write fault */
-#define ERR16_INVALID_DEV	0x4001		/* invalid device access */
-#define	ERR16_DEVICE_BUSY	0x4002		/* device is busy */
-#define	ERR16_MEMORY		0x4003		/* device pass thru requires too much memory */
-#define	ERR16_NO_FEATURE	0x40FA		/* feature no implemented */
-#define	ERR16_NOTAG			0x40FD		/* no tag space available */
-#define	ERR16_NOT_READY		0x40FE		/* controller not ready error */
-#define	ERR16_SETUP_FLASH	0x5050		/* error when writing setup to flash memory */
-#define	ERR16_SETUP_SIZE	0x5051		/* setup block size error */
-#define	ERR16_SENSE			0xFFFF		/* sense opereration failed */
-#define	ERR16_SC_BUSY		0x0008		/* SCSI status - Busy */
-#define	ERR16_SC_RES_CONFL	0x0018		/* SCSI status - Reservation Conflict */
-#define	ERR16_SC_CMD_TERM	0x0022		/* SCSI status - Command Terminated */
-#define	ERR16_SC_OTHER		0x00FF		/* SCSI status - not recognized (any value masked) */
-#define	ERR16_MEDIA_CHANGED	0x8001		/* devices media has been changed */
-
-#define	ERR32_NONE			0x00000000	/* no errors */
-#define	ERR32_SC_COND_MET	0x00000004	/* SCSI status - Condition Met */
-#define	ERR32_CMD			0x00010101	/* command error */
-#define	ERR32_SC_CHECK_COND	0x00020002	/* SCSI status - Check Condition */
-#define	ERR32_CMD_NOT		0x00030201	/* command not supported */
-#define ERR32_NO_DEVICE     0x00040301	/* invalid device selection */
-#define	ERR32_SECTOR		0x00050202	/* bad sector */
-#define	ERR32_PROTECT		0x00060303	/* write protected */
-#define	ERR32_NOSECTOR		0x00070404	/* sector not found */
-#define	ERR32_MEDIA			0x00080C0C	/* invalid media */
-#define	ERR32_CONTROL		0x00092020	/* controller error */
-#define	ERR32_CONTROL_DMA	0x000A2120	/* Controller DMA error */
-#define	ERR32_NO_ALARM		0x000B2220 	/* alarm is not active */
-#define	ERR32_OP_BUSY		0x000C2320	/* operation busy */
-#define	ERR32_SEEK			0x000D4040	/* seek failure */
-#define	ERR32_DEVICE_FAIL	0x000E4140	/* device has failed */
-#define ERR32_TIMEOUT		0x000F8080	/* timeout error */
-#define	ERR32_DEV_NOT_READY	0x0010AAAA	/* drive not ready */
-#define	ERR32_UNDEFINED		0x0011BBBB	/* undefined error */
-#define	ERR32_WRITE_FAULT	0x0012CCCC	/* write fault */
-#define ERR32_INVALID_DEV	0x00134001	/* invalid device access */
-#define	ERR32_DEVICE_BUSY	0x00144002	/* device is busy */
-#define	ERR32_MEMORY		0x00154003	/* device pass thru requires too much memory */
-#define	ERR32_NO_FEATURE	0x001640FA	/* feature no implemented */
-#define	ERR32_NOTAG			0x001740FD	/* no tag space available */
-#define	ERR32_NOT_READY		0x001840FE	/* controller not ready error */
-#define	ERR32_SETUP_FLASH	0x00195050	/* error when writing setup to flash memory */
-#define	ERR32_SETUP_SIZE	0x001A5051	/* setup block size error */
-#define	ERR32_SENSE			0x001BFFFF	/* sense opereration failed */
-#define	ERR32_SC_BUSY		0x001C0008	/* SCSI status - Busy */
-#define	ERR32_SC_RES_CONFL	0x001D0018	/* SCSI status - Reservation Conflict */
-#define	ERR32_SC_CMD_TERM	0x001E0022	/* SCSI status - Command Terminated */
-#define	ERR32_SC_OTHER		0x001F00FF	/* SCSI status - not recognized (any value masked) */
-#define	ERR32_MEDIA_CHANGED	0x00208001	/* devices media has been changed */
-
-/************************************************/
-/*												*/
-/*	Host Operating System specification codes	*/
-/*												*/
-/************************************************/
-#define	SPEC_INTERRUPT		0x80		/* specification requires host interrupt */
-#define	SPEC_BACKWARD_SG	0x40		/* specification requires scatter/gather items reversed */
-#define	SPEC_DOS_BLOCK		0x01		/* DOS DASD blocking on pass through */
-#define	SPEC_OS2_V3			0x02		/* OS/2 Warp */
-#define	SPCE_SCO_3242		0x04		/* SCO 3.4.2.2 */
-#define	SPEC_QNX_4X			0x05		/* QNX 4.XX */
-#define	SPEC_NOVELL_NWPA	0x08		/* Novell NWPA scatter/gather support */
-
-/************************************************/
-/*												*/
-/*	Inquire structures							*/
-/*												*/
-/************************************************/
-typedef	struct	_CNT_SCSI_INQ
-	{
-	UCHAR	devt;						/* 00: device type */
-	UCHAR	devtm;						/* 01: device type modifier */
-	UCHAR	svers;						/* 02: SCSI version */
-	UCHAR	rfmt;						/* 03: response data format */
-	UCHAR	adlen;						/* 04: additional length of data */
-	UCHAR	res1;						/* 05: */
-	UCHAR	res2;						/* 06: */
-	UCHAR	fncs;						/* 07: functional capabilities */
-	UCHAR	vid[8];						/* 08: vendor ID */
-	UCHAR	pid[16];					/* 10: product ID */
-	UCHAR	rev[4];						/* 20: product revision */
-	}	CNT_SCSI_INQ;
-
-typedef	struct	_CNT_IDE_INQ
-	{
-	USHORT	GeneralConfiguration;		/* 00 */
-	USHORT	NumberOfCylinders;			/* 02 */
-	USHORT	Reserved1;					/* 04 */
-	USHORT	NumberOfHeads;				/* 06 */
-	USHORT	UnformattedBytesPerTrack;	/* 08 */
-	USHORT	UnformattedBytesPerSector;	/* 0A */
-	USHORT	SectorsPerTrack;			/* 0C */
-	USHORT	VendorUnique1[3];			/* 0E */
-	USHORT	SerialNumber[10];			/* 14 */
-	USHORT	BufferType;					/* 28 */
-	USHORT	BufferSectorSize;			/* 2A */
-	USHORT	NumberOfEccBytes;			/* 2C */
-	USHORT	FirmwareRevision[4];		/* 2E */
-	USHORT	ModelNumber[20];			/* 36 */
-	UCHAR	MaximumBlockTransfer;		/* 5E */
-	UCHAR	VendorUnique2;				/* 5F */
-	USHORT	DoubleWordIo;				/* 60 */
-	USHORT	Capabilities;				/* 62 */
-	USHORT	Reserved2;					/* 64 */
-	UCHAR	VendorUnique3;				/* 66 */
-	UCHAR	PioCycleTimingMode;			/* 67 */
-	UCHAR	VendorUnique4;				/* 68 */
-	UCHAR	DmaCycleTimingMode;			/* 69 */
-	USHORT	TranslationFieldsValid;		/* 6A */
-	USHORT	NumberOfCurrentCylinders;	/* 6C */
-	USHORT	NumberOfCurrentHeads;		/* 6E */
-	USHORT	CurrentSectorsPerTrack;		/* 70 */
-	ULONG	CurrentSectorCapacity;		/* 72 */
-	}	CNT_IDE_INQ;
-
-typedef struct	_DASD_INQUIRE
-	{
-	ULONG	type;						/* 0 = SCSI, 1 = IDE */
-	union
-		{
-		CNT_SCSI_INQ	scsi;			/* SCSI inquire data */
-		CNT_IDE_INQ		ide;			/* IDE inquire data */
-		}	inq;
-	}	DASD_INQUIRE;
-
-/************************************************/
-/*												*/
-/*	Device Codes								*/
-/*												*/
-/************************************************/
-#define DEVC_DASD			0x00		/* Direct-access Storage Device */
-#define DEVC_SEQACESS		0x01		/* Sequential-access device */
-#define DEVC_PRINTER		0x02		/* Printer device */
-#define DEVC_PROCESSOR		0x03		/* Processor device */
-#define DEVC_WRITEONCE		0x04		/* Write-once device */
-#define DEVC_CDROM			0x05		/* CD-ROM device */
-#define DEVC_SCANNER		0x06		/* Scanner device */
-#define DEVC_OPTICAL		0x07		/* Optical memory device */
-#define DEVC_MEDCHGR		0x08		/* Medium changer device */
-#define	DEVC_DASD_REMOVABLE	0x80		/* Direct-access storage device, Removable */
-#define	DEVC_NONE			0xFF		/* no device */
-
-// SCSI controls for RAID
-#define	SC_MY_RAID			0xBF			// our special CDB command byte for Win95... interface
-#define	MY_SCSI_QUERY0		0x31			// byte 1 subcommand to query driver for RAID 0 informatation
-#define	MY_SCSI_QUERY1		0x32			// byte 1 subcommand to query driver for RAID 1 informatation
-#define	MY_SCSI_QUERY5		0x33			// byte 1 subcommand to query driver for RAID 5 informatation
-#define	MY_SCSI_REBUILD		0x40			// byte 1 subcommand to reconstruct a mirrored pair
-#define MY_SCSI_DEMOFAIL	0x54			// byte 1 subcommand for RAID failure demonstration
-#define	MY_SCSI_ALARMMUTE	0x60			// byte 1 subcommand to mute any alarm currently on
-
-
-#endif
-