Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/s2io.c

55 files changed, 286 insertions, 687 deletions

diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 02e56d4..c485ee0 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -84,9 +84,6 @@ policy-routing.txt
 	- IP policy-based routing
 ray_cs.txt
 	- Raylink Wireless LAN card driver info.
-sk98lin.txt
-	- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
-	  Ethernet Adapter family driver info
 skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
deleted file mode 100644
index 8590a95..0000000
--- a/Documentation/networking/sk98lin.txt
+++ /dev/null
@@ -1,568 +0,0 @@
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1  Overview
- 2  Required Files
- 3  Installation
-    3.1  Driver Installation
-    3.2  Inclusion of adapter at system start
- 4  Driver Parameters
-    4.1  Per-Port Parameters
-    4.2  Adapter Parameters
- 5  Large Frame Support
- 6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7  Troubleshooting
-
-===========================================================================
-
-
-1  Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect 
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has 
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2  Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3  Installation
-===============
-
-It is recommended to download the latest version of the driver from the 
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be 
-installed. For details on how to patch a Linux kernel, refer to the 
-patch.txt file.
-
-3.1  Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting" 
-        below.
-
-The driver can either be integrated into the kernel or it can be compiled 
-as a module. Select the appropriate option during the kernel 
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as 
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
-   with (*) 
-3. Build a new kernel when the configuration of the above options is 
-   finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
-   with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
-   The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in 
-   your computer and you have a /proc file system, execute the command:
-   "ls /proc/net/sk98lin/" 
-   This should produce an output containing a line with the following 
-   format:
-   eth0   eth1  ...
-   which indicates that your adapter has been found and initialized.
-   
-   NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx 
-           adapter installed, the adapters will be listed as 'eth0', 
-                   'eth1', 'eth2', etc.
-                   For each adapter, repeat steps 3 and 4 below.
-
-   NOTE 2: If you have other Ethernet adapters installed, your Marvell
-           Yukon or SysKonnect SK-98xx adapter will be mapped to the 
-                   next available number, e.g. 'eth1'. The mapping is executed 
-                   automatically.
-           The module installation message (displayed either in a system
-           log file or on the console) prints a line for each adapter 
-           found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by 
-   entering:
-   ifconfig eth0 <ip-address>
-   With this command, the adapter is connected to the Ethernet. 
-   
-   SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter 
-   is now active, the link status LED of the primary port is active and 
-   the link status LED of the secondary port (on dual port adapters) is 
-   blinking (if the ports are connected to a switch or hub).
-   SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
-   In addition, you will receive a status message on the console stating
-   "ethX: network connection up using port Y" and showing the selected 
-   connection parameters (x stands for the ethernet device number 
-   (0,1,2, etc), y stands for the port name (A or B)).
-
-   NOTE: If you are in doubt about IP addresses, ask your network
-         administrator for assistance.
-  
-4. Your adapter should now be fully operational.
-   Use 'ping <otherstation>' to verify the connection to other computers 
-   on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
-   For example by executing:    
-   "cat /proc/net/sk98lin/eth0" 
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2  Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are 
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4  Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been 
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
-   options sk98lin ...
-   For "...", the same syntax is required as described for the command
-   line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
-   or 
-   unload and reload the driver.
-   The syntax of the driver parameters is:
-
-        modprobe sk98lin parameter=value1[,value2[,value3...]]
-
-   where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown 
-      below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
-        modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
-      limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
-      The current limit is 16. If you happen to install
-      more adapters, adjust this and recompile.
-
-
-4.1  Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter:    Speed_?
-Values:       10, 100, 1000, Auto
-Default:      Auto
-
-This parameter is used to set the speed capabilities. It is only valid 
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link 
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter:    AutoNeg_?
-Values:       On, Off, Sense
-Default:      On
-  
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter:    DupCap_?
-Values:       Half, Full, Both
-Default:      Both
-
-This parameters is only relevant if auto-negotiation for this port is 
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter:    FlowCtrl_?
-Values:       Sym, SymOrRem, LocSend, None
-Default:      SymOrRem
-
-This parameter can be used to set the flow control capabilities the 
-port reports during auto-negotiation. It can be set for each port 
-individually.
-Possible modes:
-   -- Sym      = Symmetric: both link partners are allowed to send 
-                  PAUSE frames
-   -- SymOrRem = SymmetricOrRemote: both or only remote partner 
-                  are allowed to send PAUSE frames
-   -- LocSend  = LocalSend: only local link partner is allowed 
-                  to send PAUSE frames
-   -- None     = no link partner is allowed to send PAUSE frames
-  
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter:    Role_?
-Values:       Auto, Master, Slave
-Default:      Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the 
-slave. Usually, this is negotiated between the two ports during link 
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2  Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter:    ConType
-Values:       Auto, 100FD, 100HD, 10FD, 10HD
-Default:      Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most 
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
-    ConType   |  DupCap   AutoNeg   FlowCtrl   Role             Speed
-    ----------+------------------------------------------------------
-    Auto      |  Both     On        SymOrRem   Auto             Auto
-    100FD     |  Full     Off       None       Auto (ignored)   100
-    100HD     |  Half     Off       None       Auto (ignored)   100
-    10FD      |  Full     Off       None       Auto (ignored)   10
-    10HD      |  Half     Off       None       Auto (ignored)   10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to 
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter:    Moderation
-Values:       None, Static, Dynamic
-Default:      None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver 
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
-   -- None - No interrupt moderation is applied on the adapter card. 
-      Therefore, each transmit or receive interrupt is served immediately
-      as soon as it appears on the interrupt line of the adapter card.
-
-   -- Static - Interrupt moderation is applied on the adapter card. 
-      All transmit and receive interrupts are queued until a complete
-      moderation interval ends. If such a moderation interval ends, all
-      queued interrupts are processed in one big bunch without any delay.
-      The term 'static' reflects the fact, that interrupt moderation is
-      always enabled, regardless how much network load is currently 
-      passing via a particular interface. In addition, the duration of
-      the moderation interval has a fixed length that never changes while
-      the driver is operational.
-
-   -- Dynamic - Interrupt moderation might be applied on the adapter card,
-      depending on the load of the system. If the driver detects that the
-      system load is too high, the driver tries to shield the system against 
-      too much network load by enabling interrupt moderation. If - at a later
-      time - the CPU utilization decreases again (or if the network load is 
-      negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load 
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter:    IntsPerSec
-Values:       30...40000 (interrupts per second)
-Default:      2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval. 
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec' 
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds. 
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per 
-second) seems to be meaningful, but the increase of packet-processing delay 
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter:    PrefPort
-Values:       A, B
-Default:      A
-
-This is used to force the preferred port to A or B (on dual-port network 
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter:    RlmtMode
-Values:       CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default:      CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port 
-fails, RLMT switches immediately to the standby link. The virtual link is 
-maintained as long as at least one 'physical' link is up. 
-
-Possible modes:
-
-   -- CheckLinkState - Check link state only: RLMT uses the link state
-      reported by the adapter hardware for each individual port to 
-      determine whether a port can be used for all network traffic or 
-      not.
-
-   -- CheckLocalPort - In this mode, RLMT monitors the network path 
-      between the two ports of an adapter by regularly exchanging packets
-      between them. This mode requires a network configuration in which 
-      the two ports are able to "see" each other (i.e. there must not be 
-      any router between the ports).
-
-   -- CheckSeg - Check local port and segmentation: This mode supports the
-      same functions as the CheckLocalPort mode and additionally checks 
-      network segmentation between the ports. Therefore, this mode is only
-      to be used if Gigabit Ethernet switches are installed on the network
-      that have been configured to use the Spanning Tree protocol. 
-
-   -- DualNet - In this mode, ports A and B are used as separate devices. 
-      If you have a dual port adapter, port A will be configured as eth0 
-      and port B as eth1. Both ports can be used independently with 
-      distinct IP addresses. The preferred port setting is not used. 
-      RLMT is turned off.
-   
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations 
-      where a network path between the ports on one adapter exists. 
-      Moreover, they are not designed to work where adapters are connected
-      back-to-back.
-***
-
-
-5  Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large 
-frames can result in an improved throughput if transferring large amounts 
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the 
-interface to the desired value (up to 9000), execute the following 
-command:
-      ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch, 
-it should be configured to allow large frames and auto-negotiation should  
-be set to OFF. The setting must be configured on all adapters that can be 
-reached by the large frames. If one adapter is not set to receive large 
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the 
-following command:
-      ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig' 
-line to the system startup sequence (named something like "S99sk98lin" 
-in /etc/rc.d/rc2.d).
-***
-
-
-6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and 
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. 
-These features are only available after installation of open source 
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source 
-      modules and does not take the responsibility for any kind of 
-      failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may 
-      cause problems when unloading the driver.
-
-
-7  Troubleshooting
-==================
-
-If any problems occur during the installation process, check the 
-following list:
-
-
-Problem:  The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
-             'Ethernet controller: SysKonnect SK-98xx ...'
-          If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has 
-          been found by the system and should be operational.
-          If this entry does not exist or if the file '/proc/pci' is not 
-          found, there may be a hardware problem or the PCI support may 
-          not be enabled in your kernel.
-          The adapter can be checked using the diagnostics program which 
-          is available on the SysKonnect web site:
-          www.syskonnect.com
-          
-          Some COMPAQ machines have problems dealing with PCI under Linux.
-          This problem is described in the 'PCI howto' document
-          (included in some distributions or available from the
-          web, e.g. at 'www.linux.org'). 
-
-
-Problem:  Programs such as 'ifconfig' or 'route' cannot be found or the 
-          error message 'Operation not permitted' is displayed.
-Reason:   You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem:  Upon use of the command 'ping <address>' the message
-          "ping: sendto: Network is unreachable" is displayed.
-Reason:   Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the 
-          route in the 'network configuration'.
-          Check the existing routes with the 'route' command and check 
-          if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem:  The driver can be started, the adapter is connected to the 
-          network, but you cannot receive or transmit any packets; 
-          e.g. 'ping' does not work.
-Reason:   There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the 
-          manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry 
-      automatically, problems of this kind may occur here as well. We've 
-      come across a situation in which the driver started correctly at 
-      system start, but after the driver has been removed and reloaded,
-      the route of the adapter's network pointed to the 'dummy0'device 
-      and had to be corrected manually.
-
-
-Problem:  Your computer should act as a router between multiple 
-          IP subnetworks (using multiple adapters), but computers in 
-          other subnetworks cannot be reached.
-Reason:   Either the router's kernel is not configured for IP forwarding 
-          or the routing table and gateway configuration of at least one 
-          computer is not working.
-
-Problem:  Upon driver start, the following error message is displayed:
-          "eth0: -- ERROR --
-          Class: internal Software error
-          Nr:    0xcc
-          Msg:   SkGeInitPort() cannot init running ports"
-Reason:   You are using a driver compiled for single processor machines 
-          on a multiprocessor machine with SMP (Symmetric MultiProcessor) 
-          kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
-          the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@syskonnect.de).
-When contacting our technical support, please ensure that the following 
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 47c57a4..98099f5 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -978,6 +978,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 		/* Docs are vague about this atm_hdr field. By the way, the FS
 		 * chip makes odd errors if lower bits are set.... -- REW */
 		tc->atm_hdr =  (vpi << 20) | (vci << 4); 
+		tmc0 = 0;
 		{
 			int pcr = atm_pcr_goal (txtp);
 
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 2e3395b..ffc4a5a 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3000,8 +3000,7 @@ he_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
 
 /* eeprom routines  -- see 4.7 */
 
-u8
-read_prom_byte(struct he_dev *he_dev, int addr)
+static u8 read_prom_byte(struct he_dev *he_dev, int addr)
 {
 	u32 val = 0, tmp_read = 0;
 	int i, j = 0;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index b967919..28d77b5 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -2016,8 +2016,7 @@ idt77252_send_skb(struct atm_vcc *vcc, struct sk_buff *skb, int oam)
 	return 0;
 }
 
-int
-idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
+static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
 {
 	return idt77252_send_skb(vcc, skb, 0);
 }
@@ -3072,8 +3071,7 @@ idt77252_dev_open(struct idt77252_dev *card)
 	return 0;
 }
 
-void
-idt77252_dev_close(struct atm_dev *dev)
+static void idt77252_dev_close(struct atm_dev *dev)
 {
 	struct idt77252_dev *card = dev->dev_data;
 	u32 conf;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ef524526..670c093 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -958,6 +958,7 @@ static void ia_suni_pm7345_init (IADEV *iadev)
 
 /***************************** IA_LIB END *****************************/
     
+#ifdef CONFIG_ATM_IA_DEBUG
 static int tcnter = 0;
 static void xdump( u_char*  cp, int  length, char*  prefix )
 {
@@ -992,6 +993,7 @@ static void xdump( u_char*  cp, int  length, char*  prefix )
     }
 
 }  /* close xdump(... */
+#endif /* CONFIG_ATM_IA_DEBUG */
 
   
 static struct atm_dev *ia_boards = NULL;  
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 95d1b61..da30a31 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2555,7 +2555,7 @@ config NIU
 
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC64 && PCI
+	depends on PPC_PASEMI && PCI
 	select PHYLIB
 	select INET_LRO
 	help
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c993a32..26b2dd5 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -575,7 +575,6 @@ adjust_head:
 static int bf537mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
-	struct bf537mac_local *lp = netdev_priv(dev);
 	unsigned int data;
 
 	current_tx_ptr->skb = skb;
@@ -634,7 +633,6 @@ out:
 static void bf537mac_rx(struct net_device *dev)
 {
 	struct sk_buff *skb, *new_skb;
-	struct bf537mac_local *lp = netdev_priv(dev);
 	unsigned short len;
 
 	/* allocate a new skb for next time receive */
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 90a1f31..979c2d0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -341,6 +341,7 @@ static ssize_t bonding_store_slaves(struct device *d,
 
 	if (command[0] == '-') {
 		dev = NULL;
+		original_mtu = 0;
 		bond_for_each_slave(bond, slave, i)
 			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
 				dev = slave->dev;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0272afb..4708a16 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -1854,6 +1854,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct ring_desc* start_tx;
 	struct ring_desc* prev_tx;
 	struct nv_skb_map* prev_tx_ctx;
+	unsigned long flags;
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
@@ -1863,10 +1864,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irq(&np->lock);
+		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
-		spin_unlock_irq(&np->lock);
+		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1929,13 +1930,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
 			 NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irqsave(&np->lock, flags);
 
 	/* set tx flags */
 	start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	np->put_tx.orig = put_tx;
 
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
 		dev->name, entries, tx_flags_extra);
@@ -1971,6 +1972,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 	struct ring_desc_ex* prev_tx;
 	struct nv_skb_map* prev_tx_ctx;
 	struct nv_skb_map* start_tx_ctx;
+	unsigned long flags;
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
@@ -1980,10 +1982,10 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irq(&np->lock);
+		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
-		spin_unlock_irq(&np->lock);
+		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -2059,7 +2061,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 			start_tx->txvlan = 0;
 	}
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irqsave(&np->lock, flags);
 
 	if (np->tx_limit) {
 		/* Limit the number of outstanding tx. Setup all fragments, but
@@ -2085,7 +2087,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 	start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	np->put_tx.ex = put_tx;
 
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
 		dev->name, entries, tx_flags_extra);
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 0789802..378a239 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1242,8 +1242,8 @@ static int emac_close(struct net_device *ndev)
 static inline u16 emac_tx_csum(struct emac_instance *dev,
 			       struct sk_buff *skb)
 {
-	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
-			     skb->ip_summed == CHECKSUM_PARTIAL)) {
+	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
+		(skb->ip_summed == CHECKSUM_PARTIAL)) {
 		++dev->stats.tx_packets_csum;
 		return EMAC_TX_CTRL_TAH_CSUM;
 	}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 268a288..dcbe01b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.19"
+#define DRV_VERSION "2.0.26.20"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 206918b..da2206f 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -343,6 +343,12 @@ int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_l
 	void __iomem *ee_addr = tp->base_addr + CSR9;
 	int read_cmd = location | (EE_READ_CMD << addr_len);
 
+	/* If location is past the end of what we can address, don't
+	 * read some other location (ie truncate). Just return zero.
+	 */
+	if (location > (1 << addr_len) - 1)
+		return 0;
+
 	iowrite32(EE_ENB & ~EE_CS, ee_addr);
 	iowrite32(EE_ENB, ee_addr);
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index ed600bf..82f404b 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1437,6 +1437,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	   EEPROM.
 	   */
 	ee_data = tp->eeprom;
+	memset(ee_data, 0, sizeof(tp->eeprom));
 	sum = 0;
 	if (chip_idx == LC82C168) {
 		for (i = 0; i < 3; i++) {
@@ -1458,8 +1459,12 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 		/* A serial EEPROM interface, we read now and sort it out later. */
 		int sa_offset = 0;
 		int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+		int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
 
-		for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+		if (ee_max_addr > sizeof(tp->eeprom))
+			ee_max_addr = sizeof(tp->eeprom);
+
+		for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
 			u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
 			ee_data[i] = data & 0xff;
 			ee_data[i + 1] = data >> 8;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a12c9c4..0604f3f 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -129,7 +129,7 @@ config USB_USBNET
 
 config USB_NET_AX8817X
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
-	depends on USB_USBNET && NET_ETHERNET
+	depends on USB_USBNET
 	select CRC32
 	default y
 	help
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 2968bb3..f7319d32 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -354,7 +354,7 @@ static void dm9601_set_multicast(struct net_device *net)
 		struct dev_mc_list *mc_list = net->mc_list;
 		int i;
 
-		for (i = 0; i < net->mc_count; i++) {
+		for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
 			u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			hashes[crc >> 3] |= 1 << (crc & 0x7);
 		}
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index d1ed68a..b588c89 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1128,12 +1128,8 @@ pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	pegasus_t *pegasus;
 
-	if (in_atomic())
-		return 0;
-
 	pegasus = netdev_priv(dev);
 	mii_ethtool_gset(&pegasus->mii, ecmd);
-
 	return 0;
 }
 
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 629c909..b5860b9 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -58,7 +58,7 @@ struct lapbethdev {
 	struct net_device_stats stats;		/* some statistics */
 };
 
-static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
+static LIST_HEAD(lapbeth_devices);
 
 /* ------------------------------------------------------------------------ */
 
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 8a9776b..70db057 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -574,6 +574,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring,
 	}
 
 	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
+		b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
 		dev_kfree_skb_any(skb);
 		return -EIO;
 	}
@@ -829,8 +830,12 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
 						  DMA_TO_DEVICE);
 
 			if (b43_dma_mapping_error(ring, dma_test,
-						  b43_txhdr_size(dev), 1))
+						  b43_txhdr_size(dev), 1)) {
+
+				b43err(dev->wl,
+				       "TXHDR DMA allocation failed\n");
 				goto err_kfree_txhdr_cache;
+			}
 		}
 
 		dma_unmap_single(dev->dev->dev,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b79a6bd..371e4a1 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -91,6 +91,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 
 	dev->conf.ConfigBase = parse.config.base;
 	dev->conf.Present = parse.config.rmask[0];
+	dev->conf.Attributes = CONF_ENABLE_IRQ;
+	dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	dev->io.BasePort2 = 0;
 	dev->io.NumPorts2 = 0;
@@ -112,8 +114,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (res != CS_SUCCESS)
 		goto err_disable;
 
-	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
-	dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+	dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	dev->irq.Handler = NULL; /* The handler is registered later. */
 	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index d177465..53afeba 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -677,9 +677,7 @@ sbi_get_int_status_exit:
 
 	/* Card has a command result for us */
 	if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
-		spin_lock(&priv->driver_lock);
 		ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
-		spin_unlock(&priv->driver_lock);
 		if (ret < 0)
 			lbs_pr_err("could not receive cmd from card\n");
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 62b58a6..50ea7bd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1252,11 +1252,20 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
 
 exit:
 	/*
-	 * Set device mode to sleep for power management.
+	 * Set device mode to sleep for power management,
+	 * on some hardware this call seems to consistently fail.
+	 * From the specifications it is hard to tell why it fails,
+	 * and if this is a "bad thing".
+	 * Overall it is safe to just ignore the failure and
+	 * continue suspending. The only downside is that the
+	 * device will not be in optimal power save mode, but with
+	 * the radio and the other components already disabled the
+	 * device is as good as disabled.
 	 */
 	retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
 	if (retval)
-		return retval;
+		WARNING(rt2x00dev, "Device failed to enter sleep state, "
+			"continue suspending.\n");
 
 	return 0;
 }
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 993758f..c36c76c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1105,12 +1105,14 @@ static inline int netif_is_multiqueue(const struct net_device *dev)
 }
 
 /* Use this variant when it is known for sure that it
- * is executing from interrupt context.
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
  */
 extern void dev_kfree_skb_irq(struct sk_buff *skb);
 
 /* Use this variant in places where it could be invoked
- * either from interrupt or non-interrupt context.
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
  */
 extern void dev_kfree_skb_any(struct sk_buff *skb);
 
diff --git a/include/net/llc.h b/include/net/llc.h
index f502458..7940da1 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -65,7 +65,6 @@ struct llc_sap {
 
 extern struct list_head llc_sap_list;
 extern rwlock_t llc_sap_list_lock;
-extern unsigned char llc_station_mac_sa[ETH_ALEN];
 
 extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
 		   struct packet_type *pt, struct net_device *orig_dev);
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 4a8f58b..75b8e29 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -381,7 +381,7 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
 	xid_info->fmt_id = LLC_XID_FMT_ID;	/* 0x81 */
 	xid_info->type	 = svcs_supported;
 	xid_info->rw	 = rx_window << 1;	/* size of receive window */
-	skb_put(skb, 3);
+	skb_put(skb, sizeof(struct llc_xid_info));
 }
 
 /**
@@ -406,7 +406,7 @@ static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb,
 	xid_info->fmt_id = LLC_XID_FMT_ID;
 	xid_info->type	 = svcs_supported;
 	xid_info->rw	 = rx_window << 1;
-	skb_put(skb, 3);
+	skb_put(skb, sizeof(struct llc_xid_info));
 }
 
 /* LLC Type 2 FRMR response information field format */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
index 2c56dbe..ed25bec 100644
--- a/include/net/llc_sap.h
+++ b/include/net/llc_sap.h
@@ -1,5 +1,8 @@
 #ifndef LLC_SAP_H
 #define LLC_SAP_H
+
+#include <asm/types.h>
+
 /*
  * Copyright (c) 1997 by Procom Technology,Inc.
  * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@@ -19,8 +22,8 @@ struct sock;
 extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
 extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
 			       unsigned char prim);
-extern struct sk_buff *llc_alloc_frame(struct sock *sk,
-				       struct net_device *dev);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+				       u8 type, u32 data_size);
 
 extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
 				        struct sk_buff *skb,
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 694be86..5975ec3 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -384,17 +384,35 @@ static void vlan_sync_address(struct net_device *dev,
 	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
 }
 
+static void __vlan_device_event(struct net_device *dev, unsigned long event)
+{
+	switch (event) {
+	case NETDEV_CHANGENAME:
+		vlan_proc_rem_dev(dev);
+		if (vlan_proc_add_dev(dev) < 0)
+			pr_warning("8021q: failed to change proc name for %s\n",
+					dev->name);
+		break;
+	}
+}
+
 static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			     void *ptr)
 {
 	struct net_device *dev = ptr;
-	struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+	struct vlan_group *grp;
 	int i, flgs;
 	struct net_device *vlandev;
 
 	if (dev_net(dev) != &init_net)
 		return NOTIFY_DONE;
 
+	if (is_vlan_dev(dev)) {
+		__vlan_device_event(dev, event);
+		goto out;
+	}
+
+	grp = __vlan_find_group(dev->ifindex);
 	if (!grp)
 		goto out;
 
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 73efcc7..51271ae 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -45,4 +45,9 @@ void vlan_netlink_fini(void);
 
 extern struct rtnl_link_ops vlan_link_ops;
 
+static inline int is_vlan_dev(struct net_device *dev)
+{
+	return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
 #endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 3b8657a..24cd96e 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -210,11 +210,6 @@ int vlan_proc_rem_dev(struct net_device *vlandev)
  * The following few functions build the content of /proc/net/vlan/config
  */
 
-static inline int is_vlan_dev(struct net_device *dev)
-{
-	return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
 /* start read of /proc/net/vlan/config */
 static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
 	__acquires(dev_base_lock)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 1220d8a..d366423 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -53,6 +53,30 @@
 /* Bluetooth sockets */
 #define BT_MAX_PROTO	8
 static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+
+static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
+static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
+static const char *bt_key_strings[BT_MAX_PROTO] = {
+	"sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
+	"sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
+
+static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+	"slock-AF_BLUETOOTH-BTPROTO_L2CAP",
+	"slock-AF_BLUETOOTH-BTPROTO_HCI",
+	"slock-AF_BLUETOOTH-BTPROTO_SCO",
+	"slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+	"slock-AF_BLUETOOTH-BTPROTO_BNEP",
+	"slock-AF_BLUETOOTH-BTPROTO_CMTP",
+	"slock-AF_BLUETOOTH-BTPROTO_HIDP",
+	"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
 static DEFINE_RWLOCK(bt_proto_lock);
 
 int bt_sock_register(int proto, struct net_proto_family *ops)
@@ -95,6 +119,21 @@ int bt_sock_unregister(int proto)
 }
 EXPORT_SYMBOL(bt_sock_unregister);
 
+static void bt_reclassify_sock_lock(struct socket *sock, int proto)
+{
+	struct sock *sk = sock->sk;
+
+	if (!sk)
+		return;
+	BUG_ON(sock_owned_by_user(sk));
+
+	sock_lock_init_class_and_name(sk,
+			bt_slock_key_strings[proto],
+			&bt_slock_key[proto],
+			bt_key_strings[proto],
+			&bt_lock_key[proto]);
+}
+
 static int bt_sock_create(struct net *net, struct socket *sock, int proto)
 {
 	int err;
@@ -117,6 +156,7 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto)
 
 	if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
 		err = bt_proto[proto]->create(net, sock, proto);
+		bt_reclassify_sock_lock(sock, proto);
 		module_put(bt_proto[proto]->owner);
 	}
 
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index b5d4019..1d36c09 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -84,7 +84,7 @@ static struct hci_sec_filter hci_sec_filter = {
 };
 
 static struct bt_sock_list hci_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
 };
 
 /* Send frame to RAW socket */
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 6b995ac..a4849f2 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -62,7 +62,7 @@ static u32 l2cap_feat_mask = 0x0000;
 static const struct proto_ops l2cap_sock_ops;
 
 static struct bt_sock_list l2cap_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
 };
 
 static void __l2cap_sock_close(struct sock *sk, int reason);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 0c2c937..eb62558 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err)
 
 		rfcomm_dlc_lock(d);
 		d->state = BT_CLOSED;
-		d->state_change(d, err);
 		rfcomm_dlc_unlock(d);
+		d->state_change(d, err);
 
 		skb_queue_purge(&d->tx_queue);
 		rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index c103fa0..5083adc 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -60,7 +60,7 @@
 static const struct proto_ops rfcomm_sock_ops;
 
 static struct bt_sock_list rfcomm_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
 };
 
 static void rfcomm_sock_close(struct sock *sk);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index e4c779b..c3f749a 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -570,12 +570,7 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
 					return;
 
 				rfcomm_dev_del(dev);
-				/* We have to drop DLC lock here, otherwise
-				   rfcomm_dev_put() will dead lock if it's
-				   the last reference. */
-				rfcomm_dlc_unlock(dlc);
 				rfcomm_dev_put(dev);
-				rfcomm_dlc_lock(dlc);
 			}
 		} else
 			tty_hangup(dev->tty);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 2a5953b..b0d487e 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -58,7 +58,7 @@
 static const struct proto_ops sco_sock_ops;
 
 static struct bt_sock_list sco_sk_list = {
-	.lock = RW_LOCK_UNLOCKED
+	.lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
 };
 
 static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 93170bf..4ed429b 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -86,7 +86,10 @@ EXPORT_SYMBOL(inet_frags_fini);
 void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
 {
 	nf->low_thresh = 0;
+
+	local_bh_disable();
 	inet_frag_evictor(nf, f);
+	local_bh_enable();
 }
 EXPORT_SYMBOL(inet_frags_exit_net);
 
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 9d6d3be..4813c39 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -85,7 +85,7 @@ int ip_forward(struct sk_buff *skb)
 	if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
 		goto sr_failed;
 
-	if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
+	if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
 		     (ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
 		IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
 		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 03bd706..7b7fcac 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1551,14 +1551,14 @@ static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
 	__acquires(udp_hash_lock)
 {
 	read_lock(&udp_hash_lock);
-	return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
+	return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
 }
 
 static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	struct sock *sk;
 
-	if (v == (void *)1)
+	if (v == SEQ_START_TOKEN)
 		sk = udp_get_idx(seq, 0);
 	else
 		sk = udp_get_next(seq, v);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 5ab9973..87f6888 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -776,6 +776,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i
 	struct inet6_dev *idev = ifp->idev;
 	struct in6_addr addr, *tmpaddr;
 	unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
+	unsigned long regen_advance;
 	int tmp_plen;
 	int ret = 0;
 	int max_addresses;
@@ -836,8 +837,23 @@ retry:
 	tmp_tstamp = ifp->tstamp;
 	spin_unlock_bh(&ifp->lock);
 
+	regen_advance = idev->cnf.regen_max_retry *
+	                idev->cnf.dad_transmits *
+	                idev->nd_parms->retrans_time / HZ;
 	write_unlock(&idev->lock);
 
+	/* A temporary address is created only if this calculated Preferred
+	 * Lifetime is greater than REGEN_ADVANCE time units.  In particular,
+	 * an implementation must not create a temporary address with a zero
+	 * Preferred Lifetime.
+	 */
+	if (tmp_prefered_lft <= regen_advance) {
+		in6_ifa_put(ifp);
+		in6_dev_put(idev);
+		ret = -1;
+		goto out;
+	}
+
 	addr_flags = IFA_F_TEMPORARY;
 	/* set in addrconf_prefix_rcv() */
 	if (ifp->flags & IFA_F_OPTIMISTIC)
@@ -1834,6 +1850,9 @@ ok:
 				 * lifetimes of an existing temporary address
 				 * when processing a Prefix Information Option.
 				 */
+				if (ifp != ift->ifpub)
+					continue;
+
 				spin_lock(&ift->lock);
 				flags = ift->flags;
 				if (ift->valid_lft > valid_lft &&
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 63309d1..227ce3d 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -440,10 +440,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
 	}
 
 	if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
-		goto out;
+		goto out_dst_release;
 
 	if (ip6_dst_lookup(sk, &dst2, &fl))
-		goto out;
+		goto out_dst_release;
 
 	err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
 	if (err == -ENOENT) {
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 7e36269..43a617e 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -234,8 +234,7 @@ int ip6_mc_input(struct sk_buff *skb)
 	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
 
 	hdr = ipv6_hdr(skb);
-	deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
-	    ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
+	deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
 
 	/*
 	 *	IPv6 multicast router mode isnt currently supported.
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index ad80662..9e5f305 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -171,7 +171,9 @@ static __inline__ void fq_kill(struct nf_ct_frag6_queue *fq)
 
 static void nf_ct_frag6_evictor(void)
 {
+	local_bh_disable();
 	inet_frag_evictor(&nf_init_frags, &nf_frags);
+	local_bh_enable();
 }
 
 static void nf_ct_frag6_expire(unsigned long data)
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index f93b576..97101dc 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -155,6 +155,9 @@ static int llc_ui_create(struct net *net, struct socket *sock, int protocol)
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
 
+	if (!capable(CAP_NET_RAW))
+		return -EPERM;
+
 	if (net != &init_net)
 		return -EAFNOSUPPORT;
 
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index f728ffe..019c780 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -198,7 +198,7 @@ int llc_conn_ac_send_disc_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -223,7 +223,7 @@ int llc_conn_ac_send_dm_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -249,7 +249,7 @@ int llc_conn_ac_send_dm_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -282,7 +282,8 @@ int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock *sk, struct sk_buff *skb)
 		llc_pdu_decode_pf_bit(skb, &f_bit);
 	else
 		f_bit = 0;
-	nskb = llc_alloc_frame(sk, llc->dev);
+	nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_frmr_info));
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
 
@@ -306,7 +307,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_frmr_info));
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -336,7 +338,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
 	struct llc_sock *llc = llc_sk(sk);
 
 	llc_pdu_decode_pf_bit(skb, &f_bit);
-	nskb = llc_alloc_frame(sk, llc->dev);
+	nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_frmr_info));
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -424,7 +427,7 @@ int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock *sk,
 	struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -459,7 +462,7 @@ int llc_conn_ac_send_rej_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -483,7 +486,7 @@ int llc_conn_ac_send_rej_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -507,7 +510,7 @@ int llc_conn_ac_send_rej_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -531,7 +534,7 @@ int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -555,7 +558,7 @@ int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -579,7 +582,7 @@ int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -615,7 +618,7 @@ int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -639,7 +642,7 @@ int llc_conn_ac_send_rr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -663,7 +666,7 @@ int llc_conn_ac_send_rr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -688,7 +691,7 @@ int llc_conn_ac_send_ack_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -712,7 +715,7 @@ int llc_conn_ac_send_rr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -736,7 +739,7 @@ int llc_conn_ac_send_ack_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -770,7 +773,7 @@ int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
@@ -799,7 +802,7 @@ int llc_conn_ac_send_ua_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
 	u8 f_bit;
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
 
 	llc_pdu_decode_pf_bit(skb, &f_bit);
 	if (nskb) {
@@ -956,7 +959,7 @@ static int llc_conn_ac_send_rr_rsp_f_set_ackpf(struct sock *sk,
 {
 	int rc = -ENOBUFS;
 	struct llc_sock *llc = llc_sk(sk);
-	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+	struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
 
 	if (nskb) {
 		struct llc_sap *sap = llc->sap;
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index 248b590..50d5b10 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -25,8 +25,6 @@
 LIST_HEAD(llc_sap_list);
 DEFINE_RWLOCK(llc_sap_list_lock);
 
-unsigned char llc_station_mac_sa[ETH_ALEN];
-
 /**
  *	llc_sap_alloc - allocates and initializes sap.
  *
@@ -37,8 +35,8 @@ static struct llc_sap *llc_sap_alloc(void)
 	struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
 
 	if (sap) {
+		/* sap->laddr.mac - leave as a null, it's filled by bind */
 		sap->state = LLC_SAP_STATE_ACTIVE;
-		memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
 		rwlock_init(&sap->sk_list.lock);
 		atomic_set(&sap->refcnt, 1);
 	}
@@ -167,10 +165,6 @@ static int __init llc_init(void)
 	if (dev != NULL)
 		dev = next_net_device(dev);
 
-	if (dev != NULL)
-		memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
-	else
-		memset(llc_station_mac_sa, 0, ETH_ALEN);
 	dev_add_pack(&llc_packet_type);
 	dev_add_pack(&llc_tr_packet_type);
 	return 0;
@@ -185,7 +179,6 @@ static void __exit llc_exit(void)
 module_init(llc_init);
 module_exit(llc_exit);
 
-EXPORT_SYMBOL(llc_station_mac_sa);
 EXPORT_SYMBOL(llc_sap_list);
 EXPORT_SYMBOL(llc_sap_list_lock);
 EXPORT_SYMBOL(llc_sap_find);
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index a69c5c4..1c45f17 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -117,8 +117,12 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
 	skb_pull(skb, llc_len);
 	if (skb->protocol == htons(ETH_P_802_2)) {
 		__be16 pdulen = eth_hdr(skb)->h_proto;
-		u16 data_size = ntohs(pdulen) - llc_len;
+		s32 data_size = ntohs(pdulen) - llc_len;
 
+		if (data_size < 0 ||
+		    ((skb_tail_pointer(skb) -
+		      (u8 *)pdu) - llc_len) < data_size)
+			return 0;
 		if (unlikely(pskb_trim_rcsum(skb, data_size)))
 			return 0;
 	}
diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c
index fa83243..2e6cb79 100644
--- a/net/llc/llc_pdu.c
+++ b/net/llc/llc_pdu.c
@@ -241,7 +241,7 @@ void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb, struct llc_pdu_sn *prev_pdu,
 	FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
 	FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
 	FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
-	skb_put(skb, 5);
+	skb_put(skb, sizeof(struct llc_frmr_info));
 }
 
 /**
diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c
index ac3d93b..a94bd56 100644
--- a/net/llc/llc_s_ac.c
+++ b/net/llc/llc_s_ac.c
@@ -103,7 +103,8 @@ int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb)
 	llc_pdu_decode_sa(skb, mac_da);
 	llc_pdu_decode_da(skb, mac_sa);
 	llc_pdu_decode_ssap(skb, &dsap);
-	nskb = llc_alloc_frame(NULL, skb->dev);
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+			       sizeof(struct llc_xid_info));
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
@@ -144,11 +145,15 @@ int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb)
 	u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
 	struct sk_buff *nskb;
 	int rc = 1;
+	u32 data_size;
 
 	llc_pdu_decode_sa(skb, mac_da);
 	llc_pdu_decode_da(skb, mac_sa);
 	llc_pdu_decode_ssap(skb, &dsap);
-	nskb = llc_alloc_frame(NULL, skb->dev);
+
+	/* The test request command is type U (llc_len = 3) */
+	data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index 2525165..e2ddde7 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -24,20 +24,41 @@
 #include <net/tcp_states.h>
 #include <linux/llc.h>
 
+static int llc_mac_header_len(unsigned short devtype)
+{
+	switch (devtype) {
+	case ARPHRD_ETHER:
+	case ARPHRD_LOOPBACK:
+		return sizeof(struct ethhdr);
+#ifdef CONFIG_TR
+	case ARPHRD_IEEE802_TR:
+		return sizeof(struct trh_hdr);
+#endif
+	}
+	return 0;
+}
+
 /**
  *	llc_alloc_frame - allocates sk_buff for frame
  *	@dev: network device this skb will be sent over
+ *	@type: pdu type to allocate
+ *	@data_size: data size to allocate
  *
  *	Allocates an sk_buff for frame and initializes sk_buff fields.
  *	Returns allocated skb or %NULL when out of memory.
  */
-struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
+struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+				u8 type, u32 data_size)
 {
-	struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
+	int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+	struct sk_buff *skb;
+
+	hlen += llc_mac_header_len(dev->type);
+	skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
 
 	if (skb) {
 		skb_reset_mac_header(skb);
-		skb_reserve(skb, 50);
+		skb_reserve(skb, hlen);
 		skb_reset_network_header(skb);
 		skb_reset_transport_header(skb);
 		skb->protocol = htons(ETH_P_802_2);
diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c
index 6f2ea20..83da133 100644
--- a/net/llc/llc_station.c
+++ b/net/llc/llc_station.c
@@ -253,13 +253,14 @@ static int llc_station_ac_inc_xid_r_cnt_by_1(struct sk_buff *skb)
 static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
 {
 	int rc = 1;
-	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_xid_info));
 
 	if (!nskb)
 		goto out;
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
 	llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
@@ -274,7 +275,8 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
 {
 	u8 mac_da[ETH_ALEN], dsap;
 	int rc = 1;
-	struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
+	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+					       sizeof(struct llc_xid_info));
 
 	if (!nskb)
 		goto out;
@@ -283,7 +285,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
 	llc_pdu_decode_ssap(skb, &dsap);
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
 	llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
@@ -298,7 +300,12 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
 {
 	u8 mac_da[ETH_ALEN], dsap;
 	int rc = 1;
-	struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+	u32 data_size;
+	struct sk_buff *nskb;
+
+	/* The test request command is type U (llc_len = 3) */
+	data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+	nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
 
 	if (!nskb)
 		goto out;
@@ -307,7 +314,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
 	llc_pdu_decode_ssap(skb, &dsap);
 	llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
 	llc_pdu_init_as_test_rsp(nskb, skb);
-	rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+	rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
 	if (unlikely(rc))
 		goto free;
 	llc_station_send_pdu(nskb);
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 5ee431b..aaa5480 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -375,6 +375,18 @@ static int ieee80211_open(struct net_device *dev)
 	if (need_hw_reconfig)
 		ieee80211_hw_config(local);
 
+	/*
+	 * ieee80211_sta_work is disabled while network interface
+	 * is down. Therefore, some configuration changes may not
+	 * yet be effective. Trigger execution of ieee80211_sta_work
+	 * to fix this.
+	 */
+	if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+	   sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+		struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+		queue_work(local->hw.workqueue, &ifsta->work);
+	}
+
 	netif_start_queue(dev);
 
 	return 0;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 110eaf3..c20ef89 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -360,7 +360,7 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
 	struct ieee80211_if_sta *ifsta = &sdata->u.sta;
 	bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
-	bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
+	bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
 	DECLARE_MAC_BUF(mac);
 	u32 changed = 0;
 
@@ -376,16 +376,15 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
 		changed |= BSS_CHANGED_ERP_CTS_PROT;
 	}
 
-	if (preamble_mode != bss_conf->use_short_preamble) {
+	if (use_short_preamble != bss_conf->use_short_preamble) {
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: switched to %s barker preamble"
 			       " (BSSID=%s)\n",
 			       sdata->dev->name,
-			       (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
-					"short" : "long",
+			       use_short_preamble ? "short" : "long",
 			       print_mac(mac, ifsta->bssid));
 		}
-		bss_conf->use_short_preamble = preamble_mode;
+		bss_conf->use_short_preamble = use_short_preamble;
 		changed |= BSS_CHANGED_ERP_PREAMBLE;
 	}
 
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 92d85c3..d1ff3f8 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -598,17 +598,24 @@ static int rose_release(struct socket *sock)
 
 	if (sk == NULL) return 0;
 
+	sock_hold(sk);
+	sock_orphan(sk);
+	lock_sock(sk);
 	rose = rose_sk(sk);
 
 	switch (rose->state) {
 	case ROSE_STATE_0:
+		release_sock(sk);
 		rose_disconnect(sk, 0, -1, -1);
+		lock_sock(sk);
 		rose_destroy_socket(sk);
 		break;
 
 	case ROSE_STATE_2:
 		rose->neighbour->use--;
+		release_sock(sk);
 		rose_disconnect(sk, 0, -1, -1);
+		lock_sock(sk);
 		rose_destroy_socket(sk);
 		break;
 
@@ -633,6 +640,8 @@ static int rose_release(struct socket *sock)
 	}
 
 	sock->sk = NULL;
+	release_sock(sk);
+	sock_put(sk);
 
 	return 0;
 }
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 10b5c08..b741618 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -184,10 +184,22 @@ static inline int qdisc_restart(struct net_device *dev)
 
 void __qdisc_run(struct net_device *dev)
 {
-	do {
-		if (!qdisc_restart(dev))
+	unsigned long start_time = jiffies;
+
+	while (qdisc_restart(dev)) {
+		if (netif_queue_stopped(dev))
+			break;
+
+		/*
+		 * Postpone processing if
+		 * 1. another process needs the CPU;
+		 * 2. we've been doing it for too long.
+		 */
+		if (need_resched() || jiffies != start_time) {
+			netif_schedule(dev);
 			break;
-	} while (!netif_queue_stopped(dev));
+		}
+	}
 
 	clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
 }