Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...

86 files changed, 1775 insertions, 792 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 4d55a18..db1ad7e 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -123,3 +123,54 @@ Description:
 		half page, or a quarter page).
 
 		In the case of ECC NOR, it is the ECC block size.
+
+What:		/sys/class/mtd/mtdX/ecc_strength
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Maximum number of bit errors that the device is capable of
+		correcting within each region covering an ecc step.  This will
+		always be a non-negative integer.  Note that some devices will
+		have multiple ecc steps within each writesize region.
+
+		In the case of devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bitflip_threshold
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		This allows the user to examine and adjust the criteria by which
+		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
+		bit errors that were corrected on any single region comprising
+		an ecc step (as reported by the driver) equals or exceeds this
+		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
+		returned.  Higher layers (e.g., UBI) use this return code as an
+		indication that an erase block may be degrading and should be
+		scrutinized as a candidate for being marked as bad.
+
+		The initial value may be specified by the flash device driver.
+		If not, then the default value is ecc_strength.
+
+		The introduction of this feature brings a subtle change to the
+		meaning of the -EUCLEAN return code.  Previously, it was
+		interpreted to mean simply "one or more bit errors were
+		corrected".  Its new interpretation can be phrased as "a
+		dangerously high number of bit errors were corrected on one or
+		more regions comprising an ecc step".  The precise definition of
+		"dangerously high" can be adjusted by the user with
+		bitflip_threshold.  Users are discouraged from doing this,
+		however, unless they know what they are doing and have intimate
+		knowledge of the properties of their device.  Broadly speaking,
+		bitflip_threshold should be low enough to detect genuine erase
+		block degradation, but high enough to avoid the consequences of
+		a persistent return value of -EUCLEAN on devices where sticky
+		bitflips occur.  Note that if bitflip_threshold exceeds
+		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+		returned, absent a hard error.
+
+		This is generally applicable only to NAND flash devices with ECC
+		capability.  It is ignored on devices lacking ECC capability;
+		i.e., devices for which ecc_strength is zero.
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 0c674be..e0aedb7 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1119,8 +1119,6 @@ in this page</entry>
 		These constants are defined in nand.h. They are ored together to describe
 		the chip functionality.
      		<programlisting>
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR	0x00000001
 /* Buswitdh is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
new file mode 100644
index 0000000..1a5bbd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -0,0 +1,33 @@
+* Freescale General-Purpose Media Interface (GPMI)
+
+The GPMI nand controller provides an interface to control the
+NAND flash chips. We support only one NAND chip now.
+
+Required properties:
+  - compatible : should be "fsl,<chip>-gpmi-nand"
+  - reg : should contain registers location and length for gpmi and bch.
+  - reg-names: Should contain the reg names "gpmi-nand" and "bch"
+  - interrupts : The first is the DMA interrupt number for GPMI.
+                 The second is the BCH interrupt number.
+  - interrupt-names : The interrupt names "gpmi-dma", "bch";
+  - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+gpmi-nand@8000c000 {
+	compatible = "fsl,imx28-gpmi-nand";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x8000c000 2000>, <0x8000a000 2000>;
+	reg-names = "gpmi-nand", "bch";
+	interrupts = <88>, <41>;
+	interrupt-names = "gpmi-dma", "bch";
+	fsl,gpmi-dma-channel = <4>;
+
+	partition@0 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
new file mode 100644
index 0000000..b5833d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.txt
@@ -0,0 +1,19 @@
+* Freescale's mxc_nand
+
+Required properties:
+- compatible: "fsl,imxXX-nand"
+- reg: address range of the nfc block
+- interrupts: irq to be used
+- nand-bus-width: see nand.txt
+- nand-ecc-mode: see nand.txt
+- nand-on-flash-bbt: see nand.txt
+
+Example:
+
+	nand@d8000000 {
+		compatible = "fsl,imx27-nand";
+		reg = <0xd8000000 0x1000>;
+		interrupts = <29>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+	};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 2b1a166..386c769 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -213,5 +213,14 @@
 				status = "disabled";
 			};
 		};
+		nand@d8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			compatible = "fsl,imx27-nand";
+			reg = <0xd8000000 0x1000>;
+			interrupts = <29>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index eb28237..01abd35 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -82,8 +82,6 @@ static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
 	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
 }
 
-static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
-
 static struct mtd_partition snappercl15_nand_parts[] = {
 	{
 		.name		= "Kernel",
@@ -100,10 +98,8 @@ static struct mtd_partition snappercl15_nand_parts[] = {
 static struct platform_nand_data snappercl15_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
-		.part_probe_types	= snappercl15_nand_part_probes,
 		.partitions		= snappercl15_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.options		= NAND_NO_AUTOINCR,
 		.chip_delay		= 25,
 	},
 	.ctrl = {
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index d4ef339..75cab2d 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -105,8 +105,6 @@ static int ts72xx_nand_device_ready(struct mtd_info *mtd)
 	return !!(__raw_readb(addr) & 0x20);
 }
 
-static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
-
 #define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
 #define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
 
@@ -134,7 +132,6 @@ static struct platform_nand_data ts72xx_nand_data = {
 		.nr_chips	= 1,
 		.chip_offset	= 0,
 		.chip_delay	= 15,
-		.part_probe_types = ts72xx_nand_part_probes,
 		.partitions	= ts72xx_nand_parts,
 		.nr_partitions	= ARRAY_SIZE(ts72xx_nand_parts),
 	},
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ed38d03..eee0cc8 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -29,6 +29,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL),
 	{ /* sentinel */ }
 };
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3d742ae..108a9d3 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -60,8 +60,6 @@ static struct platform_device ixdp425_flash = {
 #if defined(CONFIG_MTD_NAND_PLATFORM) || \
     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition ixdp425_partitions[] = {
 	{
 		.name	= "ixp400 NAND FS 0",
@@ -100,8 +98,6 @@ static struct platform_nand_data ixdp425_flash_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
 		.chip_delay		= 30,
-		.options		= NAND_NO_AUTOINCR,
-		.part_probe_types 	= part_probes,
 		.partitions	 	= ixdp425_partitions,
 		.nr_partitions	 	= ARRAY_SIZE(ixdp425_partitions),
 	},
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 58cacaf..2e8d3e1 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -111,7 +111,7 @@ static struct nomadik_nand_platform_data nhk8815_nand_data = {
 	.parts		= nhk8815_partitions,
 	.nparts		= ARRAY_SIZE(nhk8815_partitions),
 	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
-			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+			| NAND_NO_READRDY,
 	.init		= nhk8815_nand_init,
 };
 
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index c7364fd..6872f3f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -192,14 +192,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 7e50368..a28e989 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -186,8 +186,6 @@ static int h2_nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
 }
 
-static const char *h2_part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data h2_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -195,7 +193,6 @@ static struct platform_nand_data h2_nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
 		.partitions		= h2_nand_partitions,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= h2_part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9fb03f1..108a864 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -188,8 +188,6 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -197,7 +195,6 @@ static struct platform_nand_data nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(nand_partitions),
 		.partitions		= nand_partitions,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index f2cb243..703d55e 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -150,14 +150,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 46b09da..2286410 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -49,6 +49,7 @@
 #define GPMC_ECC_CONTROL	0x1f8
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
+#define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
 
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR		0x100
@@ -935,3 +936,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
+ * @cs: chip select number
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ *
+ * This function must be executed before any call to gpmc_enable_hwecc_bch.
+ */
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
+{
+	/* check if ecc module is in use */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	/* support only OMAP3 class */
+	if (!cpu_is_omap34xx()) {
+		printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+	 * Other chips may be added if confirmed to work.
+	 */
+	if ((nerrors == 4) &&
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+		printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
+		return -EINVAL;
+	}
+
+	/* sanity check */
+	if (nsectors > 8) {
+		printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
+		       nsectors);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
+
+/**
+ * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ */
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+			  int nerrors)
+{
+	unsigned int val;
+
+	/* check if ecc module is in use */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	gpmc_ecc_used = cs;
+
+	/* clear ecc and enable bits */
+	gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (cs                       <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	gpmc_write_reg(GPMC_ECC_CONFIG, val);
+	gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
+
+/**
+ * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
+{
+	int i;
+	unsigned long nsectors, reg, val1, val2;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+		/* Read hw-computed remainder */
+		val1 = gpmc_read_reg(reg + 0);
+		val2 = gpmc_read_reg(reg + 4);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
+
+/**
+ * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
+{
+	int i;
+	unsigned long nsectors, reg, val1, val2, val3, val4;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+		/* Read hw-computed remainder */
+		val1 = gpmc_read_reg(reg + 0);
+		val2 = gpmc_read_reg(reg + 4);
+		val3 = gpmc_read_reg(reg + 8);
+		val4 = gpmc_read_reg(reg + 12);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc++ = 0xef ^ (val4 & 0xFF);
+		*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc++ = 0xed ^ (val3 & 0xFF);
+		*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc++ = 0x97 ^ (val2 & 0xFF);
+		*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
+
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a74f3cf..b420327 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -251,8 +251,6 @@ static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
 		readsb(io_base, buf, len);
 }
 
-const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition ts78xx_ts_nand_parts[] = {
 	{
 		.name		= "mbr",
@@ -277,7 +275,6 @@ static struct mtd_partition ts78xx_ts_nand_parts[] = {
 static struct platform_nand_data ts78xx_ts_nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
-		.part_probe_types	= ts_nand_part_probes,
 		.partitions		= ts78xx_ts_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
 		.chip_delay		= 15,
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 56e8ceb..9244493 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -679,8 +679,6 @@ static struct mtd_partition balloon3_partition_info[] = {
 	},
 };
 
-static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data balloon3_nand_pdata = {
 	.chip = {
 		.nr_chips	= 4,
@@ -688,7 +686,6 @@ struct platform_nand_data balloon3_nand_pdata = {
 		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
 		.partitions	= balloon3_partition_info,
 		.chip_delay	= 50,
-		.part_probe_types = balloon3_part_probes,
 	},
 	.ctrl = {
 		.hwcontrol	= 0,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a3a4a38..97f82ad 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -338,8 +338,6 @@ static struct mtd_partition em_x270_partition_info[] = {
 	},
 };
 
-static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data em_x270_nand_platdata = {
 	.chip = {
 		.nr_chips = 1,
@@ -347,7 +345,6 @@ struct platform_nand_data em_x270_nand_platdata = {
 		.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
 		.partitions = em_x270_partition_info,
 		.chip_delay = 20,
-		.part_probe_types = em_x270_part_probes,
 	},
 	.ctrl = {
 		.hwcontrol = 0,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 9507605..0da35dc 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -268,8 +268,6 @@ static struct mtd_partition palmtx_partition_info[] = {
 	},
 };
 
-static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data palmtx_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -277,7 +275,6 @@ struct platform_nand_data palmtx_nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
 		.partitions		= palmtx_partition_info,
 		.chip_delay		= 20,
-		.part_probe_types 	= palmtx_part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= palmtx_nand_cmd_ctl,
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 1527929..f37764a 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -92,6 +92,8 @@ enum omap_ecc {
 	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
 		/* 1-bit ecc: stored at beginning of spare area as romcode */
 	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
 };
 
 /*
@@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval);
 
 int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
 int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
+
+#ifdef CONFIG_ARCH_OMAP3
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+			  int nerrors);
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
+#endif /* CONFIG_ARCH_OMAP3 */
+
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index f6ffd6f..0b74218 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -248,8 +248,6 @@ static struct platform_device bfin_uart0_device = {
 
 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition bfin_plat_nand_partitions[] = {
 	{
 	 .name = "params(nand)",
@@ -289,7 +287,6 @@ static struct platform_nand_data bfin_plat_nand_data = {
 	.chip = {
 		 .nr_chips = 1,
 		 .chip_delay = 30,
-		 .part_probe_types = part_probes,
 		 .partitions = bfin_plat_nand_partitions,
 		 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 		 },
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 7dde016..bf22484 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -213,8 +213,6 @@ static int au1200_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1200_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -235,7 +233,6 @@ struct platform_nand_data db1200_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
 		.partitions	= db1200_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1200_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1200_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 0893f2a..c56e024 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -145,8 +145,6 @@ static int au1300_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1300_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -167,7 +165,6 @@ struct platform_nand_data db1300_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1300_nand_parts),
 		.partitions	= db1300_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1300_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1300_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 6815d07..9eb7906 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -149,8 +149,6 @@ static int au1550_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1550_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1550_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -171,7 +169,6 @@ struct platform_nand_data db1550_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1550_nand_parts),
 		.partitions	= db1550_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1550_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1550_nand_device_ready,
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 87167dc..05a1d92 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -244,11 +244,6 @@ static struct platform_device pnx833x_sata_device = {
 	.resource      = pnx833x_sata_resources,
 };
 
-static const char *part_probes[] = {
-	"cmdlinepart",
-	NULL
-};
-
 static void
 pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
@@ -268,7 +263,6 @@ static struct platform_nand_data pnx833x_flash_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
 		.chip_delay		= 25,
-		.part_probe_types 	= part_probes,
 	},
 	.ctrl = {
 		.cmd_ctrl 		= pnx833x_flash_nand_cmd_ctrl
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index ea77428..716e9a1 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -293,7 +293,6 @@ static void __init rb532_nand_setup(void)
 	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
 	rb532_nand_data.chip.partitions = rb532_partition_info;
 	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
-	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
 }
 
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 34cd0c5..a8a1ca7 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -188,7 +188,6 @@ static struct platform_nand_data migor_nand_flash_data = {
 		.partitions = migor_nand_flash_partitions,
 		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
 		.chip_delay = 20,
-		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
 	},
 	.ctrl = {
 		.dev_ready = migor_nand_flash_ready,
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5760c1a..27143e0 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -128,7 +128,7 @@ config MTD_AFS_PARTS
 
 config MTD_OF_PARTS
 	tristate "OpenFirmware partitioning information support"
-	default Y
+	default y
 	depends on OF
 	help
 	  This provides a partition parsing function which derives
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 608321e..63d2a64 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -4,7 +4,7 @@
  * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
  *			  Mike Albon <malbon@openwrt.org>
  * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
- * Copyright © 2011 Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright © 2011-2012  Jonas Gorski <jonas.gorski@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -82,6 +82,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	int namelen = 0;
 	int i;
 	u32 computed_crc;
+	bool rootfs_first = false;
 
 	if (bcm63xx_detect_cfe(master))
 		return -EINVAL;
@@ -109,6 +110,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 		char *boardid = &(buf->board_id[0]);
 		char *tagversion = &(buf->tag_version[0]);
 
+		sscanf(buf->flash_image_start, "%u", &rootfsaddr);
 		sscanf(buf->kernel_address, "%u", &kerneladdr);
 		sscanf(buf->kernel_length, "%u", &kernellen);
 		sscanf(buf->total_length, "%u", &totallen);
@@ -117,10 +119,19 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 			tagversion, boardid);
 
 		kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
-		rootfsaddr = kerneladdr + kernellen;
+		rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
 		spareaddr = roundup(totallen, master->erasesize) + cfelen;
 		sparelen = master->size - spareaddr - nvramlen;
-		rootfslen = spareaddr - rootfsaddr;
+
+		if (rootfsaddr < kerneladdr) {
+			/* default Broadcom layout */
+			rootfslen = kerneladdr - rootfsaddr;
+			rootfs_first = true;
+		} else {
+			/* OpenWrt layout */
+			rootfsaddr = kerneladdr + kernellen;
+			rootfslen = spareaddr - rootfsaddr;
+		}
 	} else {
 		pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
 			buf->header_crc, computed_crc);
@@ -156,18 +167,26 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	curpart++;
 
 	if (kernellen > 0) {
-		parts[curpart].name = "kernel";
-		parts[curpart].offset = kerneladdr;
-		parts[curpart].size = kernellen;
+		int kernelpart = curpart;
+
+		if (rootfslen > 0 && rootfs_first)
+			kernelpart++;
+		parts[kernelpart].name = "kernel";
+		parts[kernelpart].offset = kerneladdr;
+		parts[kernelpart].size = kernellen;
 		curpart++;
 	}
 
 	if (rootfslen > 0) {
-		parts[curpart].name = "rootfs";
-		parts[curpart].offset = rootfsaddr;
-		parts[curpart].size = rootfslen;
-		if (sparelen > 0)
-			parts[curpart].size += sparelen;
+		int rootfspart = curpart;
+
+		if (kernellen > 0 && rootfs_first)
+			rootfspart--;
+		parts[rootfspart].name = "rootfs";
+		parts[rootfspart].offset = rootfsaddr;
+		parts[rootfspart].size = rootfslen;
+		if (sparelen > 0  && !rootfs_first)
+			parts[rootfspart].size += sparelen;
 		curpart++;
 	}
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d02592e..22d0493 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -317,7 +317,7 @@ static void fixup_s29gl064n_sectors(struct mtd_info *mtd)
 
 	if ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0x003f) {
 		cfi->cfiq->EraseRegionInfo[0] |= 0x0040;
-		pr_warning("%s: Bad S29GL064N CFI data, adjust from 64 to 128 sectors\n", mtd->name);
+		pr_warning("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", mtd->name);
 	}
 }
 
@@ -328,10 +328,23 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd)
 
 	if ((cfi->cfiq->EraseRegionInfo[1] & 0xffff) == 0x007e) {
 		cfi->cfiq->EraseRegionInfo[1] &= ~0x0040;
-		pr_warning("%s: Bad S29GL032N CFI data, adjust from 127 to 63 sectors\n", mtd->name);
+		pr_warning("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", mtd->name);
 	}
 }
 
+static void fixup_s29ns512p_sectors(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+
+	/*
+	 *  S29NS512P flash uses more than 8bits to report number of sectors,
+	 * which is not permitted by CFI.
+	 */
+	cfi->cfiq->EraseRegionInfo[0] = 0x020001ff;
+	pr_warning("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", mtd->name);
+}
+
 /* Used to fix CFI-Tables of chips without Extended Query Tables */
 static struct cfi_fixup cfi_nopri_fixup_table[] = {
 	{ CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */
@@ -362,6 +375,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
 	{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
 	{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
+	{ CFI_MFR_AMD, 0x3f00, fixup_s29ns512p_sectors },
 	{ CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */
 	{ CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */
 	{ CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index ddf9ec6..4558e0f 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -70,7 +70,7 @@ struct cmdline_mtd_partition {
 /* mtdpart_setup() parses into here */
 static struct cmdline_mtd_partition *partitions;
 
-/* the command line passed to mtdpart_setupd() */
+/* the command line passed to mtdpart_setup() */
 static char *cmdline;
 static int cmdline_parsed = 0;
 
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index a4a80b7..681e2ee 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -52,8 +52,6 @@ static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
 
 	while (pages) {
 		page = page_read(mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -112,8 +110,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 		len = len - cpylen;
 
 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -148,8 +144,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 		len = len - cpylen;
 
 		page = page_read(mapping, index);
-		if (!page)
-			return -ENOMEM;
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -271,7 +265,6 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	dev->mtd.flags = MTD_CAP_RAM;
 	dev->mtd._erase = block2mtd_erase;
 	dev->mtd._write = block2mtd_write;
-	dev->mtd._writev = mtd_writev;
 	dev->mtd._sync = block2mtd_sync;
 	dev->mtd._read = block2mtd_read;
 	dev->mtd.priv = dev;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 50aa90a..f70854d 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -227,7 +227,7 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
 	u8 data8, *dst8;
 
 	doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
-	cdr = len & 0x3;
+	cdr = len & 0x1;
 	len4 = len - cdr;
 
 	if (first)
@@ -732,12 +732,24 @@ err:
  * @len: the number of bytes to be read (must be a multiple of 4)
  * @buf: the buffer to be filled in (or NULL is forget bytes)
  * @first: 1 if first time read, DOC_READADDRESS should be set
+ * @last_odd: 1 if last read ended up on an odd byte
+ *
+ * Reads bytes from a prepared page. There is a trickery here : if the last read
+ * ended up on an odd offset in the 1024 bytes double page, ie. between the 2
+ * planes, the first byte must be read apart. If a word (16bit) read was used,
+ * the read would return the byte of plane 2 as low *and* high endian, which
+ * will mess the read.
  *
  */
 static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
-				  int first)
+				  int first, int last_odd)
 {
-	doc_read_data_area(docg3, buf, len, first);
+	if (last_odd && len > 0) {
+		doc_read_data_area(docg3, buf, 1, first);
+		doc_read_data_area(docg3, buf ? buf + 1 : buf, len - 1, 0);
+	} else {
+		doc_read_data_area(docg3, buf, len, first);
+	}
 	doc_delay(docg3, 2);
 	return len;
 }
@@ -850,6 +862,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 	u8 *buf = ops->datbuf;
 	size_t len, ooblen, nbdata, nboob;
 	u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1;
+	int max_bitflips = 0;
 
 	if (buf)
 		len = ops->len;
@@ -876,7 +889,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 	ret = 0;
 	skip = from % DOC_LAYOUT_PAGE_SIZE;
 	mutex_lock(&docg3->cascade->lock);
-	while (!ret && (len > 0 || ooblen > 0)) {
+	while (ret >= 0 && (len > 0 || ooblen > 0)) {
 		calc_block_sector(from - skip, &block0, &block1, &page, &ofs,
 			docg3->reliable);
 		nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip);
@@ -887,20 +900,20 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 		ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
 		if (ret < 0)
 			goto err_in_read;
-		ret = doc_read_page_getbytes(docg3, skip, NULL, 1);
+		ret = doc_read_page_getbytes(docg3, skip, NULL, 1, 0);
 		if (ret < skip)
 			goto err_in_read;
-		ret = doc_read_page_getbytes(docg3, nbdata, buf, 0);
+		ret = doc_read_page_getbytes(docg3, nbdata, buf, 0, skip % 2);
 		if (ret < nbdata)
 			goto err_in_read;
 		doc_read_page_getbytes(docg3,
 				       DOC_LAYOUT_PAGE_SIZE - nbdata - skip,
-				       NULL, 0);
-		ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0);
+				       NULL, 0, (skip + nbdata) % 2);
+		ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0, 0);
 		if (ret < nboob)
 			goto err_in_read;
 		doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob,
-				       NULL, 0);
+				       NULL, 0, nboob % 2);
 
 		doc_get_bch_hw_ecc(docg3, hwecc);
 		eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
@@ -936,7 +949,8 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 			}
 			if (ret > 0) {
 				mtd->ecc_stats.corrected += ret;
-				ret = -EUCLEAN;
+				max_bitflips = max(max_bitflips, ret);
+				ret = max_bitflips;
 			}
 		}
 
@@ -1004,7 +1018,7 @@ static int doc_reload_bbt(struct docg3 *docg3)
 						     DOC_LAYOUT_PAGE_SIZE);
 		if (!ret)
 			doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
-					       buf, 1);
+					       buf, 1, 0);
 		buf += DOC_LAYOUT_PAGE_SIZE;
 	}
 	doc_read_page_finish(docg3);
@@ -1064,10 +1078,10 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
 	ret = doc_reset_seq(docg3);
 	if (!ret)
 		ret = doc_read_page_prepare(docg3, block0, block1, page,
-					    ofs + DOC_LAYOUT_WEAR_OFFSET);
+					    ofs + DOC_LAYOUT_WEAR_OFFSET, 0);
 	if (!ret)
 		ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
-					     buf, 1);
+					     buf, 1, 0);
 	doc_read_page_finish(docg3);
 
 	if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 1924d24..5d0d68c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -639,12 +639,16 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024,  64, 0) },
 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
 
+	/* Everspin */
+	{ "mr25h256", CAT25_INFO(  32 * 1024, 1, 256, 2) },
+
 	/* Intel/Numonyx -- xxxs33b */
 	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
 	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
 	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
 
 	/* Macronix */
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
 	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
 	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
 	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
@@ -728,6 +732,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
 
 	/* Catalyst / On Semiconductor -- non-JEDEC */
 	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1) },
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 797d43c..6796036 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -990,9 +990,9 @@ static int __devinit spear_smi_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	ret = clk_enable(dev->clk);
+	ret = clk_prepare_enable(dev->clk);
 	if (ret)
-		goto err_clk_enable;
+		goto err_clk_prepare_enable;
 
 	ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev);
 	if (ret) {
@@ -1020,8 +1020,8 @@ err_bank_setup:
 	free_irq(irq, dev);
 	platform_set_drvdata(pdev, NULL);
 err_irq:
-	clk_disable(dev->clk);
-err_clk_enable:
+	clk_disable_unprepare(dev->clk);
+err_clk_prepare_enable:
 	clk_put(dev->clk);
 err_clk:
 	iounmap(dev->io_base);
@@ -1074,7 +1074,7 @@ static int __devexit spear_smi_remove(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	free_irq(irq, dev);
 
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	iounmap(dev->io_base);
 	kfree(dev);
@@ -1091,7 +1091,7 @@ int spear_smi_suspend(struct platform_device *pdev, pm_message_t state)
 	struct spear_smi *dev = platform_get_drvdata(pdev);
 
 	if (dev && dev->clk)
-		clk_disable(dev->clk);
+		clk_disable_unprepare(dev->clk);
 
 	return 0;
 }
@@ -1102,7 +1102,7 @@ int spear_smi_resume(struct platform_device *pdev)
 	int ret = -EPERM;
 
 	if (dev && dev->clk)
-		ret = clk_enable(dev->clk);
+		ret = clk_prepare_enable(dev->clk);
 
 	if (!ret)
 		spear_smi_hw_init(dev);
diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c
index dbfe17b..45abed6 100644
--- a/drivers/mtd/lpddr/qinfo_probe.c
+++ b/drivers/mtd/lpddr/qinfo_probe.c
@@ -57,7 +57,7 @@ static struct qinfo_query_info qinfo_array[] = {
 
 static long lpddr_get_qinforec_pos(struct map_info *map, char *id_str)
 {
-	int qinfo_lines = sizeof(qinfo_array)/sizeof(struct qinfo_query_info);
+	int qinfo_lines = ARRAY_SIZE(qinfo_array);
 	int i;
 	int bankwidth = map_bankwidth(map) * 8;
 	int major, minor;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 8af67cf..5ba2458 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -224,7 +224,7 @@ config MTD_CK804XROM
 
 config MTD_SCB2_FLASH
 	tristate "BIOS flash chip on Intel SCB2 boards"
-	depends on X86 && MTD_JEDECPROBE
+	depends on X86 && MTD_JEDECPROBE && PCI
 	help
 	  Support for treating the BIOS flash chip on Intel SCB2 boards
 	  as an MTD device - with this you can reprogram your BIOS.
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index 92e1f41..93f0317 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -260,18 +260,7 @@ static struct pci_driver vr_nor_pci_driver = {
 	.id_table = vr_nor_pci_ids,
 };
 
-static int __init vr_nor_mtd_init(void)
-{
-	return pci_register_driver(&vr_nor_pci_driver);
-}
-
-static void __exit vr_nor_mtd_exit(void)
-{
-	pci_unregister_driver(&vr_nor_pci_driver);
-}
-
-module_init(vr_nor_mtd_init);
-module_exit(vr_nor_mtd_exit);
+module_pci_driver(vr_nor_pci_driver);
 
 MODULE_AUTHOR("Andy Lowe");
 MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range");
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 1d005a3..f14ce0a 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -352,18 +352,7 @@ static struct pci_driver mtd_pci_driver = {
 	.id_table =	mtd_pci_ids,
 };
 
-static int __init mtd_pci_maps_init(void)
-{
-	return pci_register_driver(&mtd_pci_driver);
-}
-
-static void __exit mtd_pci_maps_exit(void)
-{
-	pci_unregister_driver(&mtd_pci_driver);
-}
-
-module_init(mtd_pci_maps_init);
-module_exit(mtd_pci_maps_exit);
+module_pci_driver(mtd_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 934a72c..9dcbc68 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -234,20 +234,7 @@ static struct pci_driver scb2_flash_driver = {
 	.remove =   __devexit_p(scb2_flash_remove),
 };
 
-static int __init
-scb2_flash_init(void)
-{
-	return pci_register_driver(&scb2_flash_driver);
-}
-
-static void __exit
-scb2_flash_exit(void)
-{
-	pci_unregister_driver(&scb2_flash_driver);
-}
-
-module_init(scb2_flash_init);
-module_exit(scb2_flash_exit);
+module_pci_driver(scb2_flash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tim Hockin <thockin@sun.com>");
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index 71b0ba7..e7534c8 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -59,7 +59,7 @@ static struct mtd_partition bigflash_parts[] = {
 	}
 };
 
-static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
+static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL};
 
 #define init_sbc82xx_one_flash(map, br, or)			\
 do {								\
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c837507..5757307 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -250,6 +250,43 @@ static ssize_t mtd_name_show(struct device *dev,
 }
 static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
 
+static ssize_t mtd_ecc_strength_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength);
+}
+static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL);
+
+static ssize_t mtd_bitflip_threshold_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold);
+}
+
+static ssize_t mtd_bitflip_threshold_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+	unsigned int bitflip_threshold;
+	int retval;
+
+	retval = kstrtouint(buf, 0, &bitflip_threshold);
+	if (retval)
+		return retval;
+
+	mtd->bitflip_threshold = bitflip_threshold;
+	return count;
+}
+static DEVICE_ATTR(bitflip_threshold, S_IRUGO | S_IWUSR,
+		   mtd_bitflip_threshold_show,
+		   mtd_bitflip_threshold_store);
+
 static struct attribute *mtd_attrs[] = {
 	&dev_attr_type.attr,
 	&dev_attr_flags.attr,
@@ -260,6 +297,8 @@ static struct attribute *mtd_attrs[] = {
 	&dev_attr_oobsize.attr,
 	&dev_attr_numeraseregions.attr,
 	&dev_attr_name.attr,
+	&dev_attr_ecc_strength.attr,
+	&dev_attr_bitflip_threshold.attr,
 	NULL,
 };
 
@@ -322,6 +361,10 @@ int add_mtd_device(struct mtd_info *mtd)
 	mtd->index = i;
 	mtd->usecount = 0;
 
+	/* default value if not set by driver */
+	if (mtd->bitflip_threshold == 0)
+		mtd->bitflip_threshold = mtd->ecc_strength;
+
 	if (is_power_of_2(mtd->erasesize))
 		mtd->erasesize_shift = ffs(mtd->erasesize) - 1;
 	else
@@ -757,12 +800,24 @@ EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	     u_char *buf)
 {
+	int ret_code;
 	*retlen = 0;
 	if (from < 0 || from > mtd->size || len > mtd->size - from)
 		return -EINVAL;
 	if (!len)
 		return 0;
-	return mtd->_read(mtd, from, len, retlen, buf);
+
+	/*
+	 * In the absence of an error, drivers return a non-negative integer
+	 * representing the maximum number of bitflips that were corrected on
+	 * any one ecc region (if applicable; zero otherwise).
+	 */
+	ret_code = mtd->_read(mtd, from, len, retlen, buf);
+	if (unlikely(ret_code < 0))
+		return ret_code;
+	if (mtd->ecc_strength == 0)
+		return 0;	/* device lacks ecc */
+	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
 }
 EXPORT_SYMBOL_GPL(mtd_read);
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 9651c06..d518e4d 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -67,12 +67,12 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 	stats = part->master->ecc_stats;
 	res = part->master->_read(part->master, from + part->offset, len,
 				  retlen, buf);
-	if (unlikely(res)) {
-		if (mtd_is_bitflip(res))
-			mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
-		if (mtd_is_eccerr(res))
-			mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
-	}
+	if (unlikely(mtd_is_eccerr(res)))
+		mtd->ecc_stats.failed +=
+			part->master->ecc_stats.failed - stats.failed;
+	else
+		mtd->ecc_stats.corrected +=
+			part->master->ecc_stats.corrected - stats.corrected;
 	return res;
 }
 
@@ -517,6 +517,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 
 	slave->mtd.ecclayout = master->ecclayout;
 	slave->mtd.ecc_strength = master->ecc_strength;
+	slave->mtd.bitflip_threshold = master->bitflip_threshold;
+
 	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7d17cec..31bb7e5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -115,6 +115,46 @@ config MTD_NAND_OMAP2
           Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
 	  platforms.
 
+config MTD_NAND_OMAP_BCH
+	depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
+	bool "Enable support for hardware BCH error correction"
+	default n
+	select BCH
+	select BCH_CONST_PARAMS
+	help
+	 Support for hardware BCH error correction.
+
+choice
+	prompt "BCH error correction capability"
+	depends on MTD_NAND_OMAP_BCH
+
+config MTD_NAND_OMAP_BCH8
+	bool "8 bits / 512 bytes (recommended)"
+	help
+	 Support correcting up to 8 bitflips per 512-byte block.
+	 This will use 13 bytes of spare area per 512 bytes of page data.
+	 This is the recommended mode, as 4-bit mode does not work
+	 on some OMAP3 revisions, due to a hardware bug.
+
+config MTD_NAND_OMAP_BCH4
+	bool "4 bits / 512 bytes"
+	help
+	 Support correcting up to 4 bitflips per 512-byte block.
+	 This will use 7 bytes of spare area per 512 bytes of page data.
+	 Note that this mode does not work on some OMAP3 revisions, due to a
+	 hardware bug. Please check your OMAP datasheet before selecting this
+	 mode.
+
+endchoice
+
+if MTD_NAND_OMAP_BCH
+config BCH_CONST_M
+	default 13
+config BCH_CONST_T
+	default 4 if MTD_NAND_OMAP_BCH4
+	default 8 if MTD_NAND_OMAP_BCH8
+endif
+
 config MTD_NAND_IDS
 	tristate
 
@@ -440,7 +480,7 @@ config MTD_NAND_NANDSIM
 
 config MTD_NAND_GPMI_NAND
         bool "GPMI NAND Flash Controller driver"
-        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
         help
 	 Enables NAND Flash support for IMX23 or IMX28.
 	 The GPMI controller is very powerful, with the help of BCH
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 4f20e1d..60a0dfd 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -414,7 +414,7 @@ static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,
 	}
 	err = 0;
 	if (corrected)
-		err = -EUCLEAN;
+		err = 1;	/* return max_bitflips per ecc step */
 	if (uncorrected)
 		err = -EBADMSG;
 out:
@@ -446,7 +446,7 @@ static int alauda_read(struct mtd_info *mtd, loff_t from, size_t len,
 	}
 	err = 0;
 	if (corrected)
-		err = -EUCLEAN;
+		err = 1;	/* return max_bitflips per ecc step */
 	if (uncorrected)
 		err = -EBADMSG;
 	return err;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2165576..97ac671 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -324,9 +324,10 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
  * mtd:        mtd info structure
  * chip:       nand chip info structure
  * buf:        buffer to store read data
+ * oob_required:    caller expects OOB data read to chip->oob_poi
  */
-static int atmel_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf, int page)
+static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int oob_required, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -335,6 +336,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	uint8_t *oob = chip->oob_poi;
 	uint8_t *ecc_pos;
 	int stat;
+	unsigned int max_bitflips = 0;
 
 	/*
 	 * Errata: ALE is incorrectly wired up to the ECC controller
@@ -371,10 +373,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	/* check if there's an error */
 	stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-	if (stat < 0)
+	if (stat < 0) {
 		mtd->ecc_stats.failed++;
-	else
+	} else {
 		mtd->ecc_stats.corrected += stat;
+		max_bitflips = max_t(unsigned int, max_bitflips, stat);
+	}
 
 	/* get back to oob start (end of page) */
 	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
@@ -382,7 +386,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	/* read the oob */
 	chip->read_buf(mtd, oob, mtd->oobsize);
 
-	return 0;
+	return max_bitflips;
 }
 
 /*
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 73abbc3..9f609d2 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -508,8 +508,6 @@ static int __devinit au1550nd_probe(struct platform_device *pdev)
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
 
-	this->options = NAND_NO_AUTOINCR;
-
 	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
 
diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c
index a930666..5914bb3 100644
--- a/drivers/mtd/nand/bcm_umi_bch.c
+++ b/drivers/mtd/nand/bcm_umi_bch.c
@@ -22,9 +22,9 @@
 
 /* ---- Private Function Prototypes -------------------------------------- */
 static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, uint8_t *buf, int page);
+	struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
 static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, const uint8_t *buf);
+	struct nand_chip *chip, const uint8_t *buf, int oob_required);
 
 /* ---- Private Variables ------------------------------------------------ */
 
@@ -103,11 +103,12 @@ static struct nand_ecclayout nand_hw_eccoob_4096 = {
 *  @mtd:	mtd info structure
 *  @chip:	nand chip info structure
 *  @buf:	buffer to store read data
+*  @oob_required:	caller expects OOB data read to chip->oob_poi
 *
 ***************************************************************************/
 static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
 				       struct nand_chip *chip, uint8_t * buf,
-						 int page)
+				       int oob_required, int page)
 {
 	int sectorIdx = 0;
 	int eccsize = chip->ecc.size;
@@ -116,6 +117,7 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
 	uint8_t eccCalc[NAND_ECC_NUM_BYTES];
 	int sectorOobSize = mtd->oobsize / eccsteps;
 	int stat;
+	unsigned int max_bitflips = 0;
 
 	for (sectorIdx = 0; sectorIdx < eccsteps;
 			sectorIdx++, datap += eccsize) {
@@ -177,9 +179,10 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
 			}
 #endif
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
 		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /****************************************************************************
@@ -188,10 +191,11 @@ static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
 *  @mtd:	mtd info structure
 *  @chip:	nand chip info structure
 *  @buf:	data buffer
+*  @oob_required:	must write chip->oob_poi to OOB
 *
 ***************************************************************************/
 static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
-	struct nand_chip *chip, const uint8_t *buf)
+	struct nand_chip *chip, const uint8_t *buf, int oob_required)
 {
 	int sectorIdx = 0;
 	int eccsize = chip->ecc.size;
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 6908cdd..c855e7c 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -341,7 +341,7 @@ static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
 	 * for MLC parts which may have permanently stuck bits.
 	 */
 	struct nand_chip *chip = mtd->priv;
-	int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0);
+	int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0, 0);
 	if (ret < 0)
 		return -EFAULT;
 	else {
@@ -476,12 +476,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 		this->badblock_pattern = &largepage_bbt;
 	}
 
-	/*
-	 * FIXME: ecc strength value of 6 bits per 512 bytes of data is a
-	 * conservative guess, given 13 ecc bytes and using bch alg.
-	 * (Assume Galois field order m=15 to allow a margin of error.)
-	 */
-	this->ecc.strength = 6;
+	this->ecc.strength = 8;
 
 #endif
 
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index d7b86b9..3f1c185 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -558,7 +558,7 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 }
 
 static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-		uint8_t *buf, int page)
+		uint8_t *buf, int oob_required, int page)
 {
 	bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
 	bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -567,7 +567,7 @@ static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip
 }
 
 static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-		const uint8_t *buf)
+		const uint8_t *buf, int oob_required)
 {
 	bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
 	bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 2a96e1a..41371ba 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -364,25 +364,27 @@ static int cafe_nand_write_oob(struct mtd_info *mtd,
 
 /* Don't use -- use nand_read_oob_std for now */
 static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			      int page, int sndcmd)
+			      int page)
 {
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return 1;
+	return 0;
 }
 /**
  * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @buf:	buffer to store read data
+ * @oob_required:	caller expects OOB data read to chip->oob_poi
  *
  * The hw generator calculates the error syndrome automatically. Therefor
  * we need a special oob layout and handling.
  */
 static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			       uint8_t *buf, int page)
+			       uint8_t *buf, int oob_required, int page)
 {
 	struct cafe_priv *cafe = mtd->priv;
+	unsigned int max_bitflips = 0;
 
 	cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
 		     cafe_readl(cafe, NAND_ECC_RESULT),
@@ -449,10 +451,11 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		} else {
 			dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
 			mtd->ecc_stats.corrected += n;
+			max_bitflips = max_t(unsigned int, max_bitflips, n);
 		}
 	}
 
-	return 0;
+	return max_bitflips;
 }
 
 static struct nand_ecclayout cafe_oobinfo_2048 = {
@@ -518,7 +521,8 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
 
 
 static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
-					  struct nand_chip *chip, const uint8_t *buf)
+					  struct nand_chip *chip,
+					  const uint8_t *buf, int oob_required)
 {
 	struct cafe_priv *cafe = mtd->priv;
 
@@ -530,16 +534,17 @@ static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
 }
 
 static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf, int page, int cached, int raw)
+				const uint8_t *buf, int oob_required, int page,
+				int cached, int raw)
 {
 	int status;
 
 	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
 
 	if (unlikely(raw))
-		chip->ecc.write_page_raw(mtd, chip, buf);
+		chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
 	else
-		chip->ecc.write_page(mtd, chip, buf);
+		chip->ecc.write_page(mtd, chip, buf, oob_required);
 
 	/*
 	 * Cached progamming disabled for now, Not sure if its worth the
@@ -685,7 +690,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 
 	/* Enable the following for a flash based bad block table */
 	cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
-	cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+	cafe->nand.options = NAND_OWN_BUFFERS;
 
 	if (skipbbt) {
 		cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -888,17 +893,7 @@ static struct pci_driver cafe_nand_pci_driver = {
 	.resume = cafe_nand_resume,
 };
 
-static int __init cafe_nand_init(void)
-{
-	return pci_register_driver(&cafe_nand_pci_driver);
-}
-
-static void __exit cafe_nand_exit(void)
-{
-	pci_unregister_driver(&cafe_nand_pci_driver);
-}
-module_init(cafe_nand_init);
-module_exit(cafe_nand_exit);
+module_pci_driver(cafe_nand_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 821c34c..adb6c3e 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -240,7 +240,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 
 	/* Enable the following for a flash based bad block table */
 	this->bbt_options = NAND_BBT_USE_FLASH;
-	this->options = NAND_NO_AUTOINCR;
 
 	/* Scan to find existence of the device */
 	if (nand_scan(new_mtd, 1)) {
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index a9e57d6..0650aaf 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -924,9 +924,10 @@ bool is_erased(uint8_t *buf, int len)
 #define ECC_LAST_ERR(x)		((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
 
 static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
-					uint32_t irq_status)
+		       uint32_t irq_status, unsigned int *max_bitflips)
 {
 	bool check_erased_page = false;
+	unsigned int bitflips = 0;
 
 	if (irq_status & INTR_STATUS__ECC_ERR) {
 		/* read the ECC errors. we'll ignore them for now */
@@ -965,6 +966,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 					/* correct the ECC error */
 					buf[offset] ^= err_correction_value;
 					denali->mtd.ecc_stats.corrected++;
+					bitflips++;
 				}
 			} else {
 				/* if the error is not correctable, need to
@@ -984,6 +986,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 		clear_interrupts(denali);
 		denali_set_intr_modes(denali, true);
 	}
+	*max_bitflips = bitflips;
 	return check_erased_page;
 }
 
@@ -1084,7 +1087,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
  * by write_page above.
  * */
 static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf)
+				const uint8_t *buf, int oob_required)
 {
 	/* for regular page writes, we let HW handle all the ECC
 	 * data written to the device. */
@@ -1096,7 +1099,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
  * write_page() function above.
  */
 static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-					const uint8_t *buf)
+					const uint8_t *buf, int oob_required)
 {
 	/* for raw page writes, we want to disable ECC and simply write
 	   whatever data is in the buffer. */
@@ -1110,17 +1113,17 @@ static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			   int page, int sndcmd)
+			   int page)
 {
 	read_oob_data(mtd, chip->oob_poi, page);
 
-	return 0; /* notify NAND core to send command to
-			   NAND device. */
+	return 0;
 }
 
 static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			    uint8_t *buf, int page)
+			    uint8_t *buf, int oob_required, int page)
 {
+	unsigned int max_bitflips;
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 
 	dma_addr_t addr = denali->buf.dma_buf;
@@ -1153,7 +1156,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 
 	memcpy(buf, denali->buf.buf, mtd->writesize);
 
-	check_erased_page = handle_ecc(denali, buf, irq_status);
+	check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips);
 	denali_enable_dma(denali, false);
 
 	if (check_erased_page) {
@@ -1167,11 +1170,11 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 				denali->mtd.ecc_stats.failed++;
 		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 
@@ -1702,17 +1705,4 @@ static struct pci_driver denali_pci_driver = {
 	.remove = denali_pci_remove,
 };
 
-static int __devinit denali_init(void)
-{
-	printk(KERN_INFO "Spectra MTD driver\n");
-	return pci_register_driver(&denali_pci_driver);
-}
-
-/* Free memory */
-static void __devexit denali_exit(void)
-{
-	pci_unregister_driver(&denali_pci_driver);
-}
-
-module_init(denali_init);
-module_exit(denali_exit);
+module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index b082026..a225e49 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -720,6 +720,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
 	struct docg4_priv *doc = nand->priv;
 	void __iomem *docptr = doc->virtadr;
 	uint16_t status, edc_err, *buf16;
+	int bits_corrected = 0;
 
 	dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
 
@@ -772,7 +773,7 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
 
 		/* If bitflips are reported, attempt to correct with ecc */
 		if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
-			int bits_corrected = correct_data(mtd, buf, page);
+			bits_corrected = correct_data(mtd, buf, page);
 			if (bits_corrected == -EBADMSG)
 				mtd->ecc_stats.failed++;
 			else
@@ -781,24 +782,24 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
 	}
 
 	writew(0, docptr + DOC_DATAEND);
-	return 0;
+	return bits_corrected;
 }
 
 
 static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
-			       uint8_t *buf, int page)
+			       uint8_t *buf, int oob_required, int page)
 {
 	return read_page(mtd, nand, buf, page, false);
 }
 
 static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
-			   uint8_t *buf, int page)
+			   uint8_t *buf, int oob_required, int page)
 {
 	return read_page(mtd, nand, buf, page, true);
 }
 
 static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
-			  int page, int sndcmd)
+			  int page)
 {
 	struct docg4_priv *doc = nand->priv;
 	void __iomem *docptr = doc->virtadr;
@@ -952,13 +953,13 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
 }
 
 static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
-				 const uint8_t *buf)
+				 const uint8_t *buf, int oob_required)
 {
 	return write_page(mtd, nand, buf, false);
 }
 
 static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
-			     const uint8_t *buf)
+			     const uint8_t *buf, int oob_required)
 {
 	return write_page(mtd, nand, buf, true);
 }
@@ -1002,7 +1003,7 @@ static int __init read_factory_bbt(struct mtd_info *mtd)
 		return -ENOMEM;
 
 	read_page_prologue(mtd, g4_addr);
-	status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+	status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
 	if (status)
 		goto exit;
 
@@ -1079,7 +1080,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
 
 	/* write first page of block */
 	write_page_prologue(mtd, g4_addr);
-	docg4_write_page(mtd, nand, buf);
+	docg4_write_page(mtd, nand, buf, 1);
 	ret = pageprog(mtd);
 	if (!ret)
 		mtd->ecc_stats.badblocks++;
@@ -1192,8 +1193,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->ecc.prepad = 8;
 	nand->ecc.bytes	= 8;
 	nand->ecc.strength = DOCG4_T;
-	nand->options =
-		NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+	nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
 	nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
 	nand->controller = &nand->hwcontrol;
 	spin_lock_init(&nand->controller->lock);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 80b5264..7842938 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,6 +75,7 @@ struct fsl_elbc_fcm_ctrl {
 	unsigned int use_mdr;    /* Non zero if the MDR is to be set      */
 	unsigned int oob;        /* Non zero if operating on OOB data     */
 	unsigned int counter;	 /* counter for the initializations	  */
+	unsigned int max_bitflips;  /* Saved during READ0 cmd		  */
 };
 
 /* These map to the positions used by the FCM hardware ECC generator */
@@ -253,6 +254,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	if (chip->ecc.mode != NAND_ECC_HW)
 		return 0;
 
+	elbc_fcm_ctrl->max_bitflips = 0;
+
 	if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
 		uint32_t lteccr = in_be32(&lbc->lteccr);
 		/*
@@ -262,11 +265,16 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 		 * bits 28-31 are uncorrectable errors, marked elsewhere.
 		 * for small page nand only 1 bit is used.
 		 * if the ELBC doesn't have the lteccr register it reads 0
+		 * FIXME: 4 bits can be corrected on NANDs with 2k pages, so
+		 * count the number of sub-pages with bitflips and update
+		 * ecc_stats.corrected accordingly.
 		 */
 		if (lteccr & 0x000F000F)
 			out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
-		if (lteccr & 0x000F0000)
+		if (lteccr & 0x000F0000) {
 			mtd->ecc_stats.corrected++;
+			elbc_fcm_ctrl->max_bitflips = 1;
+		}
 	}
 
 	return 0;
@@ -738,26 +746,28 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	return 0;
 }
 
-static int fsl_elbc_read_page(struct mtd_info *mtd,
-                              struct nand_chip *chip,
-			      uint8_t *buf,
-			      int page)
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			      uint8_t *buf, int oob_required, int page)
 {
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+
 	fsl_elbc_read_buf(mtd, buf, mtd->writesize);
-	fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 
 	if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL)
 		mtd->ecc_stats.failed++;
 
-	return 0;
+	return elbc_fcm_ctrl->max_bitflips;
 }
 
 /* ECC will be calculated automatically, and errors will be detected in
  * waitfunc.
  */
-static void fsl_elbc_write_page(struct mtd_info *mtd,
-                                struct nand_chip *chip,
-                                const uint8_t *buf)
+static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -795,7 +805,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->bbt_md = &bbt_mirror_descr;
 
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 
 	chip->controller = &elbc_fcm_ctrl->controller;
@@ -814,11 +824,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 3;
 		chip->ecc.strength = 1;
-		/*
-		 * FIXME: can hardware ecc correct 4 bitflips if page size is
-		 * 2k?  Then does hardware report number of corrections for this
-		 * case?  If so, ecc_stats reporting needs to be fixed as well.
-		 */
 	} else {
 		/* otherwise fall back to default software ECC */
 		chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index c30ac7b..9602c1b 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -63,6 +63,7 @@ struct fsl_ifc_nand_ctrl {
 	unsigned int oob;	/* Non zero if operating on OOB data	*/
 	unsigned int eccread;	/* Non zero for a full-page ECC read	*/
 	unsigned int counter;	/* counter for the initializations	*/
+	unsigned int max_bitflips;  /* Saved during READ0 cmd		*/
 };
 
 static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
@@ -262,6 +263,8 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER)
 		dev_err(priv->dev, "NAND Flash Write Protect Error\n");
 
+	nctrl->max_bitflips = 0;
+
 	if (nctrl->eccread) {
 		int errors;
 		int bufnum = nctrl->page & priv->bufnum_mask;
@@ -290,6 +293,9 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
 			}
 
 			mtd->ecc_stats.corrected += errors;
+			nctrl->max_bitflips = max_t(unsigned int,
+						    nctrl->max_bitflips,
+						    errors);
 		}
 
 		nctrl->eccread = 0;
@@ -375,21 +381,31 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 		return;
 
-	/* READID must read all 8 possible bytes */
 	case NAND_CMD_READID:
+	case NAND_CMD_PARAM: {
+		int timing = IFC_FIR_OP_RB;
+		if (command == NAND_CMD_PARAM)
+			timing = IFC_FIR_OP_RBCD;
+
 		out_be32(&ifc->ifc_nand.nand_fir0,
 				(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-				(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+				(timing << IFC_NAND_FIR0_OP2_SHIFT));
 		out_be32(&ifc->ifc_nand.nand_fcr0,
-				NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
-		/* 8 bytes for manuf, device and exts */
-		out_be32(&ifc->ifc_nand.nand_fbcr, 8);
-		ifc_nand_ctrl->read_bytes = 8;
+				command << IFC_NAND_FCR0_CMD0_SHIFT);
+		out_be32(&ifc->ifc_nand.row3, column);
+
+		/*
+		 * although currently it's 8 bytes for READID, we always read
+		 * the maximum 256 bytes(for PARAM)
+		 */
+		out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+		ifc_nand_ctrl->read_bytes = 256;
 
 		set_addr(mtd, 0, 0, 0);
 		fsl_ifc_run_command(mtd);
 		return;
+	}
 
 	/* ERASE1 stores the block and page address */
 	case NAND_CMD_ERASE1:
@@ -682,15 +698,16 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	return nand_fsr | NAND_STATUS_WP;
 }
 
-static int fsl_ifc_read_page(struct mtd_info *mtd,
-			      struct nand_chip *chip,
-			      uint8_t *buf, int page)
+static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+			     uint8_t *buf, int oob_required, int page)
 {
 	struct fsl_ifc_mtd *priv = chip->priv;
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
 
 	fsl_ifc_read_buf(mtd, buf, mtd->writesize);
-	fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 
 	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
 		dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
@@ -698,15 +715,14 @@ static int fsl_ifc_read_page(struct mtd_info *mtd,
 	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
 		mtd->ecc_stats.failed++;
 
-	return 0;
+	return nctrl->max_bitflips;
 }
 
 /* ECC will be calculated automatically, and errors will be detected in
  * waitfunc.
  */
-static void fsl_ifc_write_page(struct mtd_info *mtd,
-				struct nand_chip *chip,
-				const uint8_t *buf)
+static void fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+			       const uint8_t *buf, int oob_required)
 {
 	fsl_ifc_write_buf(mtd, buf, mtd->writesize);
 	fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -789,7 +805,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	out_be32(&ifc->ifc_nand.ncfgr, 0x0);
 
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 
 
@@ -811,6 +827,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	/* Hardware generates ECC per 512 Bytes */
 	chip->ecc.size = 512;
 	chip->ecc.bytes = 8;
+	chip->ecc.strength = 4;
 
 	switch (csor & CSOR_NAND_PGS_MASK) {
 	case CSOR_NAND_PGS_512:
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1b8330e..38d2624 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -692,6 +692,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @buf:	buffer to store read data
+ * @oob_required:	caller expects OOB data read to chip->oob_poi
  * @page:	page number to read
  *
  * This routine is needed for fsmc version 8 as reading from NAND chip has to be
@@ -701,7 +702,7 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
  * max of 8 bits)
  */
 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				 uint8_t *buf, int page)
+				 uint8_t *buf, int oob_required, int page)
 {
 	struct fsmc_nand_data *host = container_of(mtd,
 					struct fsmc_nand_data, mtd);
@@ -720,6 +721,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	 */
 	uint16_t ecc_oob[7];
 	uint8_t *oob = (uint8_t *)&ecc_oob[0];
+	unsigned int max_bitflips = 0;
 
 	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
 		chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
@@ -748,13 +750,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
 
-	return 0;
+	return max_bitflips;
 }
 
 /*
@@ -994,9 +998,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		return PTR_ERR(host->clk);
 	}
 
-	ret = clk_enable(host->clk);
+	ret = clk_prepare_enable(host->clk);
 	if (ret)
-		goto err_clk_enable;
+		goto err_clk_prepare_enable;
 
 	/*
 	 * This device ID is actually a common AMBA ID as used on the
@@ -1176,8 +1180,8 @@ err_req_write_chnl:
 	if (host->mode == USE_DMA_ACCESS)
 		dma_release_channel(host->read_dma_chan);
 err_req_read_chnl:
-	clk_disable(host->clk);
-err_clk_enable:
+	clk_disable_unprepare(host->clk);
+err_clk_prepare_enable:
 	clk_put(host->clk);
 	return ret;
 }
@@ -1198,7 +1202,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
 			dma_release_channel(host->write_dma_chan);
 			dma_release_channel(host->read_dma_chan);
 		}
-		clk_disable(host->clk);
+		clk_disable_unprepare(host->clk);
 		clk_put(host->clk);
 	}
 
@@ -1210,7 +1214,7 @@ static int fsmc_nand_suspend(struct device *dev)
 {
 	struct fsmc_nand_data *host = dev_get_drvdata(dev);
 	if (host)
-		clk_disable(host->clk);
+		clk_disable_unprepare(host->clk);
 	return 0;
 }
 
@@ -1218,7 +1222,7 @@ static int fsmc_nand_resume(struct device *dev)
 {
 	struct fsmc_nand_data *host = dev_get_drvdata(dev);
 	if (host) {
-		clk_enable(host->clk);
+		clk_prepare_enable(host->clk);
 		fsmc_nand_setup(host->regs_va, host->bank,
 				host->nand.options & NAND_BUSWIDTH_16,
 				host->dev_timings);
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 4effb8c..a092451 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -51,15 +51,26 @@
 
 #define BP_BCH_FLASH0LAYOUT0_ECC0		12
 #define BM_BCH_FLASH0LAYOUT0_ECC0	(0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
-#define BF_BCH_FLASH0LAYOUT0_ECC0(v)		\
-	(((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
+	(GPMI_IS_MX6Q(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
+			& BM_BCH_FLASH0LAYOUT0_ECC0)		\
+	)
 
 #define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE		0
 #define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE		\
 			(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
-#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v)	\
-	(((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
-					 & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
+	(GPMI_IS_MX6Q(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
+	)
 
 #define HW_BCH_FLASH0LAYOUT1			0x00000090
 
@@ -72,13 +83,24 @@
 
 #define BP_BCH_FLASH0LAYOUT1_ECCN		12
 #define BM_BCH_FLASH0LAYOUT1_ECCN	(0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
-#define BF_BCH_FLASH0LAYOUT1_ECCN(v)		\
-	(((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
+	(GPMI_IS_MX6Q(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
+			& BM_BCH_FLASH0LAYOUT1_ECCN)		\
+	)
 
 #define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE		0
 #define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE		\
 			(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
-#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v)	\
-	(((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
-					 & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
+	(GPMI_IS_MX6Q(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
+	)
 #endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index e8ea710..a1f4332 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -21,7 +21,6 @@
 #include <linux/mtd/gpmi-nand.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <mach/mxs.h>
 
 #include "gpmi-nand.h"
 #include "gpmi-regs.h"
@@ -37,6 +36,8 @@ struct timing_threshod timing_default_threshold = {
 	.max_dll_delay_in_ns         = 16,
 };
 
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
 /*
  * Clear the bit and poll it cleared.  This is usually called with
  * a reset address and mask being either SFTRST(bit 31) or CLKGATE
@@ -47,7 +48,7 @@ static int clear_poll_bit(void __iomem *addr, u32 mask)
 	int timeout = 0x400;
 
 	/* clear the bit */
-	__mxs_clrl(mask, addr);
+	writel(mask, addr + MXS_CLR_ADDR);
 
 	/*
 	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
@@ -92,11 +93,11 @@ static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
 		goto error;
 
 	/* clear CLKGATE */
-	__mxs_clrl(MODULE_CLKGATE, reset_addr);
+	writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
 
 	if (!just_enable) {
 		/* set SFTRST to reset the block */
-		__mxs_setl(MODULE_SFTRST, reset_addr);
+		writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
 		udelay(1);
 
 		/* poll CLKGATE becoming set */
@@ -223,13 +224,13 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	/* Configure layout 0. */
 	writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
 			| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
-			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
-			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT0);
 
 	writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
-			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
-			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
 
 	/* Set *all* chip selects to use layout 0. */
@@ -255,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time,
 	return max(k, min);
 }
 
+#define DEF_MIN_PROP_DELAY	5
+#define DEF_MAX_PROP_DELAY	9
 /* Apply timing to current hardware conditions. */
 static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 					struct gpmi_nfc_hardware_timing *hw)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct timing_threshod *nfc = &timing_default_threshold;
 	struct nand_chip *nand = &this->nand;
 	struct nand_timing target = this->timing;
@@ -276,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 	int ideal_sample_delay_in_ns;
 	unsigned int sample_delay_factor;
 	int tEYE;
-	unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
-	unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+	unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+	unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
 
 	/*
 	 * If there are multiple chips, we need to relax the timings to allow
@@ -803,7 +805,8 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 	if (GPMI_IS_MX23(this)) {
 		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
 		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this)) {
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+		/* MX28 shares the same R/B register as MX6Q. */
 		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
 		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
 	} else
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index b68e043..a05b7b4 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,6 +25,8 @@
 #include <linux/mtd/gpmi-nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "gpmi-nand.h"
 
 /* add our owner bbt descriptor */
@@ -387,7 +389,7 @@ static void release_bch_irq(struct gpmi_nand_data *this)
 static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 {
 	struct gpmi_nand_data *this = param;
-	struct resource *r = this->private;
+	int dma_channel = (int)this->private;
 
 	if (!mxs_dma_is_apbh(chan))
 		return false;
@@ -399,7 +401,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 	 *	for mx28 :	MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
 	 *		(These eight channels share the same IRQ!)
 	 */
-	if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+	if (dma_channel == chan->chan_id) {
 		chan->private = &this->dma_data;
 		return true;
 	}
@@ -419,57 +421,45 @@ static void release_dma_channels(struct gpmi_nand_data *this)
 static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
-	struct gpmi_nand_platform_data *pdata = this->pdata;
-	struct resources *res = &this->resources;
-	struct resource *r, *r_dma;
-	unsigned int i;
+	struct resource *r_dma;
+	struct device_node *dn;
+	int dma_channel;
+	unsigned int ret;
+	struct dma_chan *dma_chan;
+	dma_cap_mask_t mask;
+
+	/* dma channel, we only use the first one. */
+	dn = pdev->dev.of_node;
+	ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
+	if (ret) {
+		pr_err("unable to get DMA channel from dt.\n");
+		goto acquire_err;
+	}
+	this->private = (void *)dma_channel;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME);
+	/* gpmi dma interrupt */
 	r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
 					GPMI_NAND_DMA_INTERRUPT_RES_NAME);
-	if (!r || !r_dma) {
+	if (!r_dma) {
 		pr_err("Can't get resource for DMA\n");
-		return -ENXIO;
+		goto acquire_err;
 	}
+	this->dma_data.chan_irq = r_dma->start;
 
-	/* used in gpmi_dma_filter() */
-	this->private = r;
-
-	for (i = r->start; i <= r->end; i++) {
-		struct dma_chan *dma_chan;
-		dma_cap_mask_t mask;
+	/* request dma channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		if (i - r->start >= pdata->max_chip_count)
-			break;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		/* get the DMA interrupt */
-		if (r_dma->start == r_dma->end) {
-			/* only register the first. */
-			if (i == r->start)
-				this->dma_data.chan_irq = r_dma->start;
-			else
-				this->dma_data.chan_irq = NO_IRQ;
-		} else
-			this->dma_data.chan_irq = r_dma->start + (i - r->start);
-
-		dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
-		if (!dma_chan)
-			goto acquire_err;
-
-		/* fill the first empty item */
-		this->dma_chans[i - r->start] = dma_chan;
+	dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+	if (!dma_chan) {
+		pr_err("dma_request_channel failed.\n");
+		goto acquire_err;
 	}
 
-	res->dma_low_channel = r->start;
-	res->dma_high_channel = i;
+	this->dma_chans[0] = dma_chan;
 	return 0;
 
 acquire_err:
-	pr_err("Can't acquire DMA channel %u\n", i);
 	release_dma_channels(this);
 	return -EINVAL;
 }
@@ -851,7 +841,7 @@ static void block_mark_swapping(struct gpmi_nand_data *this,
 }
 
 static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	struct gpmi_nand_data *this = chip->priv;
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -917,28 +907,31 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		mtd->ecc_stats.corrected += corrected;
 	}
 
-	/*
-	 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
-	 * details about our policy for delivering the OOB.
-	 *
-	 * We fill the caller's buffer with set bits, and then copy the block
-	 * mark to th caller's buffer. Note that, if block mark swapping was
-	 * necessary, it has already been done, so we can rely on the first
-	 * byte of the auxiliary buffer to contain the block mark.
-	 */
-	memset(chip->oob_poi, ~0, mtd->oobsize);
-	chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+	if (oob_required) {
+		/*
+		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+		 * for details about our policy for delivering the OOB.
+		 *
+		 * We fill the caller's buffer with set bits, and then copy the
+		 * block mark to th caller's buffer. Note that, if block mark
+		 * swapping was necessary, it has already been done, so we can
+		 * rely on the first byte of the auxiliary buffer to contain
+		 * the block mark.
+		 */
+		memset(chip->oob_poi, ~0, mtd->oobsize);
+		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 
-	read_page_swap_end(this, buf, mtd->writesize,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
+		read_page_swap_end(this, buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				payload_virt, payload_phys);
+	}
 exit_nfc:
 	return ret;
 }
 
-static void gpmi_ecc_write_page(struct mtd_info *mtd,
-				struct nand_chip *chip, const uint8_t *buf)
+static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	struct gpmi_nand_data *this = chip->priv;
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -1077,7 +1070,7 @@ exit_auxiliary:
  * this driver.
  */
 static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-				int page, int sndcmd)
+				int page)
 {
 	struct gpmi_nand_data *this = chip->priv;
 
@@ -1100,11 +1093,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[0] = chip->read_byte(mtd);
 	}
 
-	/*
-	 * Return true, indicating that the next call to this function must send
-	 * a command.
-	 */
-	return true;
+	return 0;
 }
 
 static int
@@ -1318,7 +1307,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
 		/* Write the first page of the current stride. */
 		dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
 		chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
-		chip->ecc.write_page_raw(mtd, chip, buffer);
+		chip->ecc.write_page_raw(mtd, chip, buffer, 0);
 		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 
 		/* Wait for the write to finish. */
@@ -1444,6 +1433,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
 	if (ret)
 		return ret;
 
+	/* Adjust the ECC strength according to the chip. */
+	this->nand.ecc.strength = this->bch_geometry.ecc_strength;
+	this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+
 	/* NAND boot init, depends on the gpmi_set_geometry(). */
 	return nand_boot_init(this);
 }
@@ -1471,9 +1464,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this)
 
 static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct mtd_info  *mtd = &this->mtd;
 	struct nand_chip *chip = &this->nand;
+	struct mtd_part_parser_data ppdata = {};
 	int ret;
 
 	/* init current chip */
@@ -1502,6 +1495,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	chip->options		|= NAND_NO_SUBPAGE_WRITE;
 	chip->ecc.mode		= NAND_ECC_HW;
 	chip->ecc.size		= 1;
+	chip->ecc.strength	= 8;
 	chip->ecc.layout	= &gpmi_hw_ecclayout;
 
 	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
@@ -1511,14 +1505,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan(mtd, pdata->max_chip_count);
+	ret = nand_scan(mtd, 1);
 	if (ret) {
 		pr_err("Chip scan failed\n");
 		goto err_out;
 	}
 
-	ret = mtd_device_parse_register(mtd, NULL, NULL,
-			pdata->partitions, pdata->partition_count);
+	ppdata.of_node = this->pdev->dev.of_node;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (ret)
 		goto err_out;
 	return 0;
@@ -1528,12 +1522,41 @@ err_out:
 	return ret;
 }
 
+static const struct platform_device_id gpmi_ids[] = {
+	{ .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
+	{ .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
+	{ .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, },
+	{},
+};
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+	{
+		.compatible = "fsl,imx23-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX23]
+	}, {
+		.compatible = "fsl,imx28-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX28]
+	}, {
+		.compatible = "fsl,imx6q-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX6Q]
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
 static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 {
-	struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct gpmi_nand_data *this;
+	const struct of_device_id *of_id;
 	int ret;
 
+	of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+	if (of_id) {
+		pdev->id_entry = of_id->data;
+	} else {
+		pr_err("Failed to find the right device id.\n");
+		return -ENOMEM;
+	}
+
 	this = kzalloc(sizeof(*this), GFP_KERNEL);
 	if (!this) {
 		pr_err("Failed to allocate per-device memory\n");
@@ -1543,13 +1566,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, this);
 	this->pdev  = pdev;
 	this->dev   = &pdev->dev;
-	this->pdata = pdata;
-
-	if (pdata->platform_init) {
-		ret = pdata->platform_init();
-		if (ret)
-			goto platform_init_error;
-	}
 
 	ret = acquire_resources(this);
 	if (ret)
@@ -1567,7 +1583,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 
 exit_nfc_init:
 	release_resources(this);
-platform_init_error:
 exit_acquire_resources:
 	platform_set_drvdata(pdev, NULL);
 	kfree(this);
@@ -1585,19 +1600,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id gpmi_ids[] = {
-	{
-		.name = "imx23-gpmi-nand",
-		.driver_data = IS_MX23,
-	}, {
-		.name = "imx28-gpmi-nand",
-		.driver_data = IS_MX28,
-	}, {},
-};
-
 static struct platform_driver gpmi_nand_driver = {
 	.driver = {
 		.name = "gpmi-nand",
+		.of_match_table = gpmi_nand_id_table,
 	},
 	.probe   = gpmi_nand_probe,
 	.remove  = __exit_p(gpmi_nand_remove),
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index ec6180d..ce5daa1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -266,8 +266,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
 #define STATUS_UNCORRECTABLE	0xfe
 
 /* Use the platform_id to distinguish different Archs. */
-#define IS_MX23			0x1
-#define IS_MX28			0x2
+#define IS_MX23			0x0
+#define IS_MX28			0x1
+#define IS_MX6Q			0x2
 #define GPMI_IS_MX23(x)		((x)->pdev->id_entry->driver_data == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->pdev->id_entry->driver_data == IS_MX28)
+#define GPMI_IS_MX6Q(x)		((x)->pdev->id_entry->driver_data == IS_MX6Q)
 #endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 9bf5ce5..50166e9 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -124,7 +124,6 @@ static int __init h1910_init(void)
 	/* 15 us command delay time */
 	this->chip_delay = 50;
 	this->ecc.mode = NAND_ECC_SOFT;
-	this->options = NAND_NO_AUTOINCR;
 
 	/* Scan to find existence of the device */
 	if (nand_scan(h1910_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index e4147e8..a6fa884 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -332,11 +332,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 	chip->ecc.mode		= NAND_ECC_HW_OOB_FIRST;
 	chip->ecc.size		= 512;
 	chip->ecc.bytes		= 9;
-	chip->ecc.strength	= 2;
-	/*
-	 * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a
-	 * conservative guess, given 9 ecc bytes and reed-solomon alg.
-	 */
+	chip->ecc.strength	= 4;
 
 	if (pdata)
 		chip->ecc.layout = pdata->ecc_layout;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index c240cf1..c259c24 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -734,7 +734,6 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
 	chip->write_buf = mpc5121_nfc_write_buf;
 	chip->verify_buf = mpc5121_nfc_verify_buf;
 	chip->select_chip = mpc5121_nfc_select_chip;
-	chip->options = NAND_NO_AUTOINCR;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 9e374e9..c58e6a9 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -32,6 +32,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/completion.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
 
 #include <asm/mach/flash.h>
 #include <mach/mxc_nand.h>
@@ -140,13 +142,47 @@
 
 #define NFC_V3_DELAY_LINE		(host->regs_ip + 0x34)
 
+struct mxc_nand_host;
+
+struct mxc_nand_devtype_data {
+	void (*preset)(struct mtd_info *);
+	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+	void (*send_page)(struct mtd_info *, unsigned int);
+	void (*send_read_id)(struct mxc_nand_host *);
+	uint16_t (*get_dev_status)(struct mxc_nand_host *);
+	int (*check_int)(struct mxc_nand_host *);
+	void (*irq_control)(struct mxc_nand_host *, int);
+	u32 (*get_ecc_status)(struct mxc_nand_host *);
+	struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+	void (*select_chip)(struct mtd_info *mtd, int chip);
+	int (*correct_data)(struct mtd_info *mtd, u_char *dat,
+			u_char *read_ecc, u_char *calc_ecc);
+
+	/*
+	 * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
+	 * (CONFIG1:INT_MSK is set). To handle this the driver uses
+	 * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
+	 */
+	int irqpending_quirk;
+	int needs_ip;
+
+	size_t regs_offset;
+	size_t spare0_offset;
+	size_t axi_offset;
+
+	int spare_len;
+	int eccbytes;
+	int eccsize;
+};
+
 struct mxc_nand_host {
 	struct mtd_info		mtd;
 	struct nand_chip	nand;
 	struct device		*dev;
 
-	void			*spare0;
-	void			*main_area0;
+	void __iomem		*spare0;
+	void __iomem		*main_area0;
 
 	void __iomem		*base;
 	void __iomem		*regs;
@@ -163,16 +199,9 @@ struct mxc_nand_host {
 
 	uint8_t			*data_buf;
 	unsigned int		buf_start;
-	int			spare_len;
-
-	void			(*preset)(struct mtd_info *);
-	void			(*send_cmd)(struct mxc_nand_host *, uint16_t, int);
-	void			(*send_addr)(struct mxc_nand_host *, uint16_t, int);
-	void			(*send_page)(struct mtd_info *, unsigned int);
-	void			(*send_read_id)(struct mxc_nand_host *);
-	uint16_t		(*get_dev_status)(struct mxc_nand_host *);
-	int			(*check_int)(struct mxc_nand_host *);
-	void			(*irq_control)(struct mxc_nand_host *, int);
+
+	const struct mxc_nand_devtype_data *devtype_data;
+	struct mxc_nand_platform_data pdata;
 };
 
 /* OOB placement block for use with hardware ecc generation */
@@ -242,21 +271,7 @@ static struct nand_ecclayout nandv2_hw_eccoob_4k = {
 	}
 };
 
-static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
-{
-	struct mxc_nand_host *host = dev_id;
-
-	if (!host->check_int(host))
-		return IRQ_NONE;
-
-	host->irq_control(host, 0);
-
-	complete(&host->op_completion);
-
-	return IRQ_HANDLED;
-}
+static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
 
 static int check_int_v3(struct mxc_nand_host *host)
 {
@@ -280,26 +295,12 @@ static int check_int_v1_v2(struct mxc_nand_host *host)
 	if (!(tmp & NFC_V1_V2_CONFIG2_INT))
 		return 0;
 
-	if (!cpu_is_mx21())
+	if (!host->devtype_data->irqpending_quirk)
 		writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
 
 	return 1;
 }
 
-/*
- * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit
- * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the
- * driver can enable/disable the irq line rather than simply masking the
- * interrupts.
- */
-static void irq_control_mx21(struct mxc_nand_host *host, int activate)
-{
-	if (activate)
-		enable_irq(host->irq);
-	else
-		disable_irq_nosync(host->irq);
-}
-
 static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
 {
 	uint16_t tmp;
@@ -328,6 +329,47 @@ static void irq_control_v3(struct mxc_nand_host *host, int activate)
 	writel(tmp, NFC_V3_CONFIG2);
 }
 
+static void irq_control(struct mxc_nand_host *host, int activate)
+{
+	if (host->devtype_data->irqpending_quirk) {
+		if (activate)
+			enable_irq(host->irq);
+		else
+			disable_irq_nosync(host->irq);
+	} else {
+		host->devtype_data->irq_control(host, activate);
+	}
+}
+
+static u32 get_ecc_status_v1(struct mxc_nand_host *host)
+{
+	return readw(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v2(struct mxc_nand_host *host)
+{
+	return readl(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v3(struct mxc_nand_host *host)
+{
+	return readl(NFC_V3_ECC_STATUS_RESULT);
+}
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+	struct mxc_nand_host *host = dev_id;
+
+	if (!host->devtype_data->check_int(host))
+		return IRQ_NONE;
+
+	irq_control(host, 0);
+
+	complete(&host->op_completion);
+
+	return IRQ_HANDLED;
+}
+
 /* This function polls the NANDFC to wait for the basic operation to
  * complete by checking the INT bit of config2 register.
  */
@@ -336,14 +378,14 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
 	int max_retries = 8000;
 
 	if (useirq) {
-		if (!host->check_int(host)) {
+		if (!host->devtype_data->check_int(host)) {
 			INIT_COMPLETION(host->op_completion);
-			host->irq_control(host, 1);
+			irq_control(host, 1);
 			wait_for_completion(&host->op_completion);
 		}
 	} else {
 		while (max_retries-- > 0) {
-			if (host->check_int(host))
+			if (host->devtype_data->check_int(host))
 				break;
 
 			udelay(1);
@@ -374,7 +416,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 	writew(cmd, NFC_V1_V2_FLASH_CMD);
 	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
 
-	if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
+	if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
 		int max_retries = 100;
 		/* Reset completion is indicated by NFC_CONFIG2 */
 		/* being set to 0 */
@@ -433,13 +475,27 @@ static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
 	wait_op_done(host, false);
 }
 
-static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	/* NANDFC buffer 0 is used for page read/write */
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+	writew(ops, NFC_V1_V2_CONFIG2);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, true);
+}
+
+static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 	int bufs, i;
 
-	if (nfc_is_v1() && mtd->writesize > 512)
+	if (mtd->writesize > 512)
 		bufs = 4;
 	else
 		bufs = 1;
@@ -463,7 +519,7 @@ static void send_read_id_v3(struct mxc_nand_host *host)
 
 	wait_op_done(host, true);
 
-	memcpy(host->data_buf, host->main_area0, 16);
+	memcpy_fromio(host->data_buf, host->main_area0, 16);
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
@@ -479,7 +535,7 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
 	/* Wait for operation to complete */
 	wait_op_done(host, true);
 
-	memcpy(host->data_buf, host->main_area0, 16);
+	memcpy_fromio(host->data_buf, host->main_area0, 16);
 
 	if (this->options & NAND_BUSWIDTH_16) {
 		/* compress the ID info */
@@ -555,7 +611,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
 	 * additional correction.  2-Bit errors cannot be corrected by
 	 * HW ECC, so we need to return failure
 	 */
-	uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
+	uint16_t ecc_status = get_ecc_status_v1(host);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
 		pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
@@ -580,10 +636,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
 
 	no_subpages = mtd->writesize >> 9;
 
-	if (nfc_is_v21())
-		ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
-	else
-		ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
+	ecc_stat = host->devtype_data->get_ecc_status(host);
 
 	do {
 		err = ecc_stat & ecc_bit_mask;
@@ -616,7 +669,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 
 	/* Check for status request */
 	if (host->status_request)
-		return host->get_dev_status(host) & 0xFF;
+		return host->devtype_data->get_dev_status(host) & 0xFF;
 
 	ret = *(uint8_t *)(host->data_buf + host->buf_start);
 	host->buf_start++;
@@ -682,7 +735,7 @@ static int mxc_nand_verify_buf(struct mtd_info *mtd,
 
 /* This function is used by upper layer for select and
  * deselect of the NAND chip */
-static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
@@ -701,11 +754,30 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
 		clk_prepare_enable(host->clk);
 		host->clk_act = 1;
 	}
+}
 
-	if (nfc_is_v21()) {
-		host->active_cs = chip;
-		writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	if (chip == -1) {
+		/* Disable the NFC clock */
+		if (host->clk_act) {
+			clk_disable(host->clk);
+			host->clk_act = 0;
+		}
+		return;
+	}
+
+	if (!host->clk_act) {
+		/* Enable the NFC clock */
+		clk_enable(host->clk);
+		host->clk_act = 1;
 	}
+
+	host->active_cs = chip;
+	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
 }
 
 /*
@@ -718,23 +790,23 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom)
 	u16 i, j;
 	u16 n = mtd->writesize >> 9;
 	u8 *d = host->data_buf + mtd->writesize;
-	u8 *s = host->spare0;
-	u16 t = host->spare_len;
+	u8 __iomem *s = host->spare0;
+	u16 t = host->devtype_data->spare_len;
 
 	j = (mtd->oobsize / n >> 1) << 1;
 
 	if (bfrom) {
 		for (i = 0; i < n - 1; i++)
-			memcpy(d + i * j, s + i * t, j);
+			memcpy_fromio(d + i * j, s + i * t, j);
 
 		/* the last section */
-		memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
+		memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
 	} else {
 		for (i = 0; i < n - 1; i++)
-			memcpy(&s[i * t], &d[i * j], j);
+			memcpy_toio(&s[i * t], &d[i * j], j);
 
 		/* the last section */
-		memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+		memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
 	}
 }
 
@@ -751,34 +823,44 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * perform a read/write buf operation, the saved column
 		  * address is used to index into the full page.
 		 */
-		host->send_addr(host, 0, page_addr == -1);
+		host->devtype_data->send_addr(host, 0, page_addr == -1);
 		if (mtd->writesize > 512)
 			/* another col addr cycle for 2k page */
-			host->send_addr(host, 0, false);
+			host->devtype_data->send_addr(host, 0, false);
 	}
 
 	/* Write out page address, if necessary */
 	if (page_addr != -1) {
 		/* paddr_0 - p_addr_7 */
-		host->send_addr(host, (page_addr & 0xff), false);
+		host->devtype_data->send_addr(host, (page_addr & 0xff), false);
 
 		if (mtd->writesize > 512) {
 			if (mtd->size >= 0x10000000) {
 				/* paddr_8 - paddr_15 */
-				host->send_addr(host, (page_addr >> 8) & 0xff, false);
-				host->send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff,
+						false);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 16) & 0xff,
+						true);
 			} else
 				/* paddr_8 - paddr_15 */
-				host->send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
 				/* paddr_8 - paddr_15 */
-				host->send_addr(host, (page_addr >> 8) & 0xff, false);
-				host->send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff,
+						false);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 16) & 0xff,
+						true);
 			} else
 				/* paddr_8 - paddr_15 */
-				host->send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->devtype_data->send_addr(host,
+						(page_addr >> 8) & 0xff, true);
 		}
 	}
 }
@@ -800,7 +882,35 @@ static int get_eccsize(struct mtd_info *mtd)
 		return 8;
 }
 
-static void preset_v1_v2(struct mtd_info *mtd)
+static void preset_v1(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t config1 = 0;
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW)
+		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+	if (!host->devtype_data->irqpending_quirk)
+		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+	host->eccsize = 1;
+
+	writew(config1, NFC_V1_V2_CONFIG1);
+	/* preset operation */
+
+	/* Unlock the internal RAM Buffer */
+	writew(0x2, NFC_V1_V2_CONFIG);
+
+	/* Blocks to be unlocked */
+	writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+	writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
+
+	/* Unlock Block Command for given address range */
+	writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v2(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
@@ -809,13 +919,12 @@ static void preset_v1_v2(struct mtd_info *mtd)
 	if (nand_chip->ecc.mode == NAND_ECC_HW)
 		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
 
-	if (nfc_is_v21())
-		config1 |= NFC_V2_CONFIG1_FP_INT;
+	config1 |= NFC_V2_CONFIG1_FP_INT;
 
-	if (!cpu_is_mx21())
+	if (!host->devtype_data->irqpending_quirk)
 		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
 
-	if (nfc_is_v21() && mtd->writesize) {
+	if (mtd->writesize) {
 		uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
 
 		host->eccsize = get_eccsize(mtd);
@@ -834,20 +943,14 @@ static void preset_v1_v2(struct mtd_info *mtd)
 	writew(0x2, NFC_V1_V2_CONFIG);
 
 	/* Blocks to be unlocked */
-	if (nfc_is_v21()) {
-		writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
-		writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
-		writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
-		writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
-		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
-		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
-		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
-		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
-	} else if (nfc_is_v1()) {
-		writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
-		writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
-	} else
-		BUG();
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
+	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
+	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
 
 	/* Unlock Block Command for given address range */
 	writew(0x4, NFC_V1_V2_WRPROT);
@@ -937,15 +1040,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	/* Command pre-processing step */
 	switch (command) {
 	case NAND_CMD_RESET:
-		host->preset(mtd);
-		host->send_cmd(host, command, false);
+		host->devtype_data->preset(mtd);
+		host->devtype_data->send_cmd(host, command, false);
 		break;
 
 	case NAND_CMD_STATUS:
 		host->buf_start = 0;
 		host->status_request = true;
 
-		host->send_cmd(host, command, true);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
@@ -958,15 +1061,16 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		command = NAND_CMD_READ0; /* only READ0 is valid */
 
-		host->send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		if (mtd->writesize > 512)
-			host->send_cmd(host, NAND_CMD_READSTART, true);
+			host->devtype_data->send_cmd(host,
+					NAND_CMD_READSTART, true);
 
-		host->send_page(mtd, NFC_OUTPUT);
+		host->devtype_data->send_page(mtd, NFC_OUTPUT);
 
-		memcpy(host->data_buf, host->main_area0, mtd->writesize);
+		memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
 		copy_spare(mtd, true);
 		break;
 
@@ -977,28 +1081,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		host->buf_start = column;
 
-		host->send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
-		memcpy(host->main_area0, host->data_buf, mtd->writesize);
+		memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
 		copy_spare(mtd, false);
-		host->send_page(mtd, NFC_INPUT);
-		host->send_cmd(host, command, true);
+		host->devtype_data->send_page(mtd, NFC_INPUT);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_READID:
-		host->send_cmd(host, command, true);
+		host->devtype_data->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
-		host->send_read_id(host);
+		host->devtype_data->send_read_id(host);
 		host->buf_start = column;
 		break;
 
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
-		host->send_cmd(host, command, false);
+		host->devtype_data->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		break;
@@ -1032,15 +1136,191 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = mirror_pattern,
 };
 
+/* v1 + irqpending_quirk: i.MX21 */
+static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
+	.preset = preset_v1,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v1,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v1,
+	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v1,
+	.irqpending_quirk = 1,
+	.needs_ip = 0,
+	.regs_offset = 0xe00,
+	.spare0_offset = 0x800,
+	.spare_len = 16,
+	.eccbytes = 3,
+	.eccsize = 1,
+};
+
+/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
+static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
+	.preset = preset_v1,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v1,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v1,
+	.ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv1_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v1,
+	.irqpending_quirk = 0,
+	.needs_ip = 0,
+	.regs_offset = 0xe00,
+	.spare0_offset = 0x800,
+	.axi_offset = 0,
+	.spare_len = 16,
+	.eccbytes = 3,
+	.eccsize = 1,
+};
+
+/* v21: i.MX25, i.MX35 */
+static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
+	.preset = preset_v2,
+	.send_cmd = send_cmd_v1_v2,
+	.send_addr = send_addr_v1_v2,
+	.send_page = send_page_v2,
+	.send_read_id = send_read_id_v1_v2,
+	.get_dev_status = get_dev_status_v1_v2,
+	.check_int = check_int_v1_v2,
+	.irq_control = irq_control_v1_v2,
+	.get_ecc_status = get_ecc_status_v2,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_4k,
+	.select_chip = mxc_nand_select_chip_v2,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 0,
+	.regs_offset = 0x1e00,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0,
+	.spare_len = 64,
+	.eccbytes = 9,
+	.eccsize = 0,
+};
+
+/* v3: i.MX51, i.MX53 */
+static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
+	.preset = preset_v3,
+	.send_cmd = send_cmd_v3,
+	.send_addr = send_addr_v3,
+	.send_page = send_page_v3,
+	.send_read_id = send_read_id_v3,
+	.get_dev_status = get_dev_status_v3,
+	.check_int = check_int_v3,
+	.irq_control = irq_control_v3,
+	.get_ecc_status = get_ecc_status_v3,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 1,
+	.regs_offset = 0,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0x1e00,
+	.spare_len = 64,
+	.eccbytes = 0,
+	.eccsize = 0,
+};
+
+#ifdef CONFIG_OF_MTD
+static const struct of_device_id mxcnd_dt_ids[] = {
+	{
+		.compatible = "fsl,imx21-nand",
+		.data = &imx21_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx27-nand",
+		.data = &imx27_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx25-nand",
+		.data = &imx25_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx51-nand",
+		.data = &imx51_nand_devtype_data,
+	},
+	{ /* sentinel */ }
+};
+
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+	struct device_node *np = host->dev->of_node;
+	struct mxc_nand_platform_data *pdata = &host->pdata;
+	const struct of_device_id *of_id =
+		of_match_device(mxcnd_dt_ids, host->dev);
+	int buswidth;
+
+	if (!np)
+		return 1;
+
+	if (of_get_nand_ecc_mode(np) >= 0)
+		pdata->hw_ecc = 1;
+
+	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+	buswidth = of_get_nand_bus_width(np);
+	if (buswidth < 0)
+		return buswidth;
+
+	pdata->width = buswidth / 8;
+
+	host->devtype_data = of_id->data;
+
+	return 0;
+}
+#else
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+	return 1;
+}
+#endif
+
+static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
+{
+	struct mxc_nand_platform_data *pdata = host->dev->platform_data;
+
+	if (!pdata)
+		return -ENODEV;
+
+	host->pdata = *pdata;
+
+	if (nfc_is_v1()) {
+		if (cpu_is_mx21())
+			host->devtype_data = &imx21_nand_devtype_data;
+		else
+			host->devtype_data = &imx27_nand_devtype_data;
+	} else if (nfc_is_v21()) {
+		host->devtype_data = &imx25_nand_devtype_data;
+	} else if (nfc_is_v3_2()) {
+		host->devtype_data = &imx51_nand_devtype_data;
+	} else
+		BUG();
+
+	return 0;
+}
+
 static int __init mxcnd_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this;
 	struct mtd_info *mtd;
-	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct mxc_nand_host *host;
 	struct resource *res;
 	int err = 0;
-	struct nand_ecclayout *oob_smallpage, *oob_largepage;
 
 	/* Allocate memory for MTD device structure and private data */
 	host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
@@ -1065,7 +1345,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->priv = host;
 	this->dev_ready = mxc_nand_dev_ready;
 	this->cmdfunc = mxc_nand_command;
-	this->select_chip = mxc_nand_select_chip;
 	this->read_byte = mxc_nand_read_byte;
 	this->read_word = mxc_nand_read_word;
 	this->write_buf = mxc_nand_write_buf;
@@ -1095,36 +1374,26 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	host->main_area0 = host->base;
 
-	if (nfc_is_v1() || nfc_is_v21()) {
-		host->preset = preset_v1_v2;
-		host->send_cmd = send_cmd_v1_v2;
-		host->send_addr = send_addr_v1_v2;
-		host->send_page = send_page_v1_v2;
-		host->send_read_id = send_read_id_v1_v2;
-		host->get_dev_status = get_dev_status_v1_v2;
-		host->check_int = check_int_v1_v2;
-		if (cpu_is_mx21())
-			host->irq_control = irq_control_mx21;
-		else
-			host->irq_control = irq_control_v1_v2;
-	}
+	err = mxcnd_probe_dt(host);
+	if (err > 0)
+		err = mxcnd_probe_pdata(host);
+	if (err < 0)
+		goto eirq;
 
-	if (nfc_is_v21()) {
-		host->regs = host->base + 0x1e00;
-		host->spare0 = host->base + 0x1000;
-		host->spare_len = 64;
-		oob_smallpage = &nandv2_hw_eccoob_smallpage;
-		oob_largepage = &nandv2_hw_eccoob_largepage;
-		this->ecc.bytes = 9;
-	} else if (nfc_is_v1()) {
-		host->regs = host->base + 0xe00;
-		host->spare0 = host->base + 0x800;
-		host->spare_len = 16;
-		oob_smallpage = &nandv1_hw_eccoob_smallpage;
-		oob_largepage = &nandv1_hw_eccoob_largepage;
-		this->ecc.bytes = 3;
-		host->eccsize = 1;
-	} else if (nfc_is_v3_2()) {
+	if (host->devtype_data->regs_offset)
+		host->regs = host->base + host->devtype_data->regs_offset;
+	host->spare0 = host->base + host->devtype_data->spare0_offset;
+	if (host->devtype_data->axi_offset)
+		host->regs_axi = host->base + host->devtype_data->axi_offset;
+
+	this->ecc.bytes = host->devtype_data->eccbytes;
+	host->eccsize = host->devtype_data->eccsize;
+
+	this->select_chip = host->devtype_data->select_chip;
+	this->ecc.size = 512;
+	this->ecc.layout = host->devtype_data->ecclayout_512;
+
+	if (host->devtype_data->needs_ip) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 		if (!res) {
 			err = -ENODEV;
@@ -1135,42 +1404,22 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 			err = -ENOMEM;
 			goto eirq;
 		}
-		host->regs_axi = host->base + 0x1e00;
-		host->spare0 = host->base + 0x1000;
-		host->spare_len = 64;
-		host->preset = preset_v3;
-		host->send_cmd = send_cmd_v3;
-		host->send_addr = send_addr_v3;
-		host->send_page = send_page_v3;
-		host->send_read_id = send_read_id_v3;
-		host->check_int = check_int_v3;
-		host->get_dev_status = get_dev_status_v3;
-		host->irq_control = irq_control_v3;
-		oob_smallpage = &nandv2_hw_eccoob_smallpage;
-		oob_largepage = &nandv2_hw_eccoob_largepage;
-	} else
-		BUG();
-
-	this->ecc.size = 512;
-	this->ecc.layout = oob_smallpage;
+	}
 
-	if (pdata->hw_ecc) {
+	if (host->pdata.hw_ecc) {
 		this->ecc.calculate = mxc_nand_calculate_ecc;
 		this->ecc.hwctl = mxc_nand_enable_hwecc;
-		if (nfc_is_v1())
-			this->ecc.correct = mxc_nand_correct_data_v1;
-		else
-			this->ecc.correct = mxc_nand_correct_data_v2_v3;
+		this->ecc.correct = host->devtype_data->correct_data;
 		this->ecc.mode = NAND_ECC_HW;
 	} else {
 		this->ecc.mode = NAND_ECC_SOFT;
 	}
 
-	/* NAND bus width determines access funtions used by upper layer */
-	if (pdata->width == 2)
+	/* NAND bus width determines access functions used by upper layer */
+	if (host->pdata.width == 2)
 		this->options |= NAND_BUSWIDTH_16;
 
-	if (pdata->flash_bbt) {
+	if (host->pdata.flash_bbt) {
 		this->bbt_td = &bbt_main_descr;
 		this->bbt_md = &bbt_mirror_descr;
 		/* update flash based bbt */
@@ -1182,28 +1431,25 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	host->irq = platform_get_irq(pdev, 0);
 
 	/*
-	 * mask the interrupt. For i.MX21 explicitely call
-	 * irq_control_v1_v2 to use the mask bit. We can't call
-	 * disable_irq_nosync() for an interrupt we do not own yet.
+	 * Use host->devtype_data->irq_control() here instead of irq_control()
+	 * because we must not disable_irq_nosync without having requested the
+	 * irq.
 	 */
-	if (cpu_is_mx21())
-		irq_control_v1_v2(host, 0);
-	else
-		host->irq_control(host, 0);
+	host->devtype_data->irq_control(host, 0);
 
 	err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
 	if (err)
 		goto eirq;
 
-	host->irq_control(host, 0);
-
 	/*
-	 * Now that the interrupt is disabled make sure the interrupt
-	 * mask bit is cleared on i.MX21. Otherwise we can't read
-	 * the interrupt status bit on this machine.
+	 * Now that we "own" the interrupt make sure the interrupt mask bit is
+	 * cleared on i.MX21. Otherwise we can't read the interrupt status bit
+	 * on this machine.
 	 */
-	if (cpu_is_mx21())
-		irq_control_v1_v2(host, 1);
+	if (host->devtype_data->irqpending_quirk) {
+		disable_irq_nosync(host->irq);
+		host->devtype_data->irq_control(host, 1);
+	}
 
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) {
@@ -1212,18 +1458,12 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	}
 
 	/* Call preset again, with correct writesize this time */
-	host->preset(mtd);
+	host->devtype_data->preset(mtd);
 
 	if (mtd->writesize == 2048)
-		this->ecc.layout = oob_largepage;
-	if (nfc_is_v21() && mtd->writesize == 4096)
-		this->ecc.layout = &nandv2_hw_eccoob_4k;
-
-	/* second phase scan */
-	if (nand_scan_tail(mtd)) {
-		err = -ENXIO;
-		goto escan;
-	}
+		this->ecc.layout = host->devtype_data->ecclayout_2k;
+	else if (mtd->writesize == 4096)
+		this->ecc.layout = host->devtype_data->ecclayout_4k;
 
 	if (this->ecc.mode == NAND_ECC_HW) {
 		if (nfc_is_v1())
@@ -1232,9 +1472,19 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 			this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
 	}
 
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		err = -ENXIO;
+		goto escan;
+	}
+
 	/* Register the partitions */
-	mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts,
-				  pdata->nr_parts);
+	mtd_device_parse_register(mtd, part_probes,
+			&(struct mtd_part_parser_data){
+				.of_node = pdev->dev.of_node,
+			},
+			host->pdata.parts,
+			host->pdata.nr_parts);
 
 	platform_set_drvdata(pdev, host);
 
@@ -1275,6 +1525,8 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(mxcnd_dt_ids),
 	},
 	.remove = __devexit_p(mxcnd_remove),
 };
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 47b19c0..d47586c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1066,15 +1066,17 @@ EXPORT_SYMBOL(nand_lock);
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
  * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf, int page)
+			      uint8_t *buf, int oob_required, int page)
 {
 	chip->read_buf(mtd, buf, mtd->writesize);
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	return 0;
 }
 
@@ -1083,13 +1085,14 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
  * We need a special oob layout and handling even when OOB isn't used.
  */
 static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
-					struct nand_chip *chip,
-					uint8_t *buf, int page)
+				       struct nand_chip *chip, uint8_t *buf,
+				       int oob_required, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1126,10 +1129,11 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  */
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1138,8 +1142,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
-	chip->ecc.read_page_raw(mtd, chip, buf, page);
+	chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1154,12 +1159,14 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1180,6 +1187,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
 	int index = 0;
+	unsigned int max_bitflips = 0;
 
 	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
@@ -1244,12 +1252,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 
 		stat = chip->ecc.correct(mtd, p,
 			&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1257,12 +1267,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
  * Not for syndrome calculating ECC controllers which need a special oob layout.
  */
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1271,6 +1282,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1289,12 +1301,14 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1302,6 +1316,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
  * Hardware ECC for large page chips, require OOB to be read first. For this
@@ -1311,7 +1326,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
  * the data area, by overwriting the NAND manufacturer bad block markings.
  */
 static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
-	struct nand_chip *chip, uint8_t *buf, int page)
+	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1320,6 +1335,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	unsigned int max_bitflips = 0;
 
 	/* Read the OOB area first */
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
@@ -1337,12 +1353,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1350,19 +1368,21 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
  * @page: page number to read
  *
  * The hw generator calculates the error syndrome automatically. Therefore we
  * need a special oob layout and handling.
  */
 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				   uint8_t *buf, int page)
+				   uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		int stat;
@@ -1379,10 +1399,12 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_buf(mtd, oob, eccbytes);
 		stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 
 		oob += eccbytes;
 
@@ -1397,7 +1419,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	if (i)
 		chip->read_buf(mtd, oob, i);
 
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1459,11 +1481,9 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	int chipnr, page, realpage, col, bytes, aligned;
+	int chipnr, page, realpage, col, bytes, aligned, oob_required;
 	struct nand_chip *chip = mtd->priv;
 	struct mtd_ecc_stats stats;
-	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
-	int sndcmd = 1;
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
@@ -1471,6 +1491,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		mtd->oobavail : mtd->oobsize;
 
 	uint8_t *bufpoi, *oob, *buf;
+	unsigned int max_bitflips = 0;
 
 	stats = mtd->ecc_stats;
 
@@ -1484,6 +1505,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 	buf = ops->datbuf;
 	oob = ops->oobbuf;
+	oob_required = oob ? 1 : 0;
 
 	while (1) {
 		bytes = min(mtd->writesize - col, readlen);
@@ -1493,21 +1515,22 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		if (realpage != chip->pagebuf || oob) {
 			bufpoi = aligned ? buf : chip->buffers->databuf;
 
-			if (likely(sndcmd)) {
-				chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-				sndcmd = 0;
-			}
+			chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
-			/* Now read the page into the buffer */
+			/*
+			 * Now read the page into the buffer.  Absent an error,
+			 * the read methods return max bitflips per ecc step.
+			 */
 			if (unlikely(ops->mode == MTD_OPS_RAW))
-				ret = chip->ecc.read_page_raw(mtd, chip,
-							      bufpoi, page);
+				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi,
+							      oob_required,
+							      page);
 			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
 				ret = chip->ecc.read_subpage(mtd, chip,
 							col, bytes, bufpoi);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
-							  page);
+							  oob_required, page);
 			if (ret < 0) {
 				if (!aligned)
 					/* Invalidate page cache */
@@ -1515,22 +1538,25 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 				break;
 			}
 
+			max_bitflips = max_t(unsigned int, max_bitflips, ret);
+
 			/* Transfer not aligned data */
 			if (!aligned) {
 				if (!NAND_SUBPAGE_READ(chip) && !oob &&
 				    !(mtd->ecc_stats.failed - stats.failed) &&
-				    (ops->mode != MTD_OPS_RAW))
+				    (ops->mode != MTD_OPS_RAW)) {
 					chip->pagebuf = realpage;
-				else
+					chip->pagebuf_bitflips = ret;
+				} else {
 					/* Invalidate page cache */
 					chip->pagebuf = -1;
+				}
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
 			buf += bytes;
 
 			if (unlikely(oob)) {
-
 				int toread = min(oobreadlen, max_oobsize);
 
 				if (toread) {
@@ -1541,13 +1567,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			}
 
 			if (!(chip->options & NAND_NO_READRDY)) {
-				/*
-				 * Apply delay or wait for ready/busy pin. Do
-				 * this before the AUTOINCR check, so no
-				 * problems arise if a chip which does auto
-				 * increment is marked as NOAUTOINCR by the
-				 * board driver.
-				 */
+				/* Apply delay or wait for ready/busy pin */
 				if (!chip->dev_ready)
 					udelay(chip->chip_delay);
 				else
@@ -1556,6 +1576,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		} else {
 			memcpy(buf, chip->buffers->databuf + col, bytes);
 			buf += bytes;
+			max_bitflips = max_t(unsigned int, max_bitflips,
+					     chip->pagebuf_bitflips);
 		}
 
 		readlen -= bytes;
@@ -1575,26 +1597,19 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
 		}
-
-		/*
-		 * Check, if the chip supports auto page increment or if we
-		 * have hit a block boundary.
-		 */
-		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
-			sndcmd = 1;
 	}
 
 	ops->retlen = ops->len - (size_t) readlen;
 	if (oob)
 		ops->oobretlen = ops->ooblen - oobreadlen;
 
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	return max_bitflips;
 }
 
 /**
@@ -1630,17 +1645,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
  */
 static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page, int sndcmd)
+			     int page)
 {
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
+	return 0;
 }
 
 /**
@@ -1649,10 +1660,9 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
  */
 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				  int page, int sndcmd)
+				  int page)
 {
 	uint8_t *buf = chip->oob_poi;
 	int length = mtd->oobsize;
@@ -1679,7 +1689,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	if (length > 0)
 		chip->read_buf(mtd, bufpoi, length);
 
-	return 1;
+	return 0;
 }
 
 /**
@@ -1775,13 +1785,13 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
 static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
-	int page, realpage, chipnr, sndcmd = 1;
+	int page, realpage, chipnr;
 	struct nand_chip *chip = mtd->priv;
 	struct mtd_ecc_stats stats;
-	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
 	int readlen = ops->ooblen;
 	int len;
 	uint8_t *buf = ops->oobbuf;
+	int ret = 0;
 
 	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
@@ -1817,20 +1827,18 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 
 	while (1) {
 		if (ops->mode == MTD_OPS_RAW)
-			sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+			ret = chip->ecc.read_oob_raw(mtd, chip, page);
 		else
-			sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+			ret = chip->ecc.read_oob(mtd, chip, page);
+
+		if (ret < 0)
+			break;
 
 		len = min(len, readlen);
 		buf = nand_transfer_oob(chip, buf, ops, len);
 
 		if (!(chip->options & NAND_NO_READRDY)) {
-			/*
-			 * Apply delay or wait for ready/busy pin. Do this
-			 * before the AUTOINCR check, so no problems arise if a
-			 * chip which does auto increment is marked as
-			 * NOAUTOINCR by the board driver.
-			 */
+			/* Apply delay or wait for ready/busy pin */
 			if (!chip->dev_ready)
 				udelay(chip->chip_delay);
 			else
@@ -1851,16 +1859,12 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
 		}
-
-		/*
-		 * Check, if the chip supports auto page increment or if we
-		 * have hit a block boundary.
-		 */
-		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
-			sndcmd = 1;
 	}
 
-	ops->oobretlen = ops->ooblen;
+	ops->oobretlen = ops->ooblen - readlen;
+
+	if (ret < 0)
+		return ret;
 
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
@@ -1919,14 +1923,16 @@ out:
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
  * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
 static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				const uint8_t *buf)
+				const uint8_t *buf, int oob_required)
 {
 	chip->write_buf(mtd, buf, mtd->writesize);
-	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+	if (oob_required)
+		chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
 }
 
 /**
@@ -1934,12 +1940,13 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
  * We need a special oob layout and handling even when ECC isn't checked.
  */
 static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
 					struct nand_chip *chip,
-					const uint8_t *buf)
+					const uint8_t *buf, int oob_required)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1973,9 +1980,10 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  */
 static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-				  const uint8_t *buf)
+				  const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1991,7 +1999,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	for (i = 0; i < chip->ecc.total; i++)
 		chip->oob_poi[eccpos[i]] = ecc_calc[i];
 
-	chip->ecc.write_page_raw(mtd, chip, buf);
+	chip->ecc.write_page_raw(mtd, chip, buf, 1);
 }
 
 /**
@@ -1999,9 +2007,10 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  */
 static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				  const uint8_t *buf)
+				  const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -2027,12 +2036,14 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
  *
  * The hw generator calculates the error syndrome automatically. Therefore we
  * need a special oob layout and handling.
  */
 static void nand_write_page_syndrome(struct mtd_info *mtd,
-				    struct nand_chip *chip, const uint8_t *buf)
+				    struct nand_chip *chip,
+				    const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -2071,21 +2082,23 @@ static void nand_write_page_syndrome(struct mtd_info *mtd,
  * @mtd: MTD device structure
  * @chip: NAND chip descriptor
  * @buf: the data to write
+ * @oob_required: must write chip->oob_poi to OOB
  * @page: page number to write
  * @cached: cached programming
  * @raw: use _raw version of write_page
  */
 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-			   const uint8_t *buf, int page, int cached, int raw)
+			   const uint8_t *buf, int oob_required, int page,
+			   int cached, int raw)
 {
 	int status;
 
 	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
 
 	if (unlikely(raw))
-		chip->ecc.write_page_raw(mtd, chip, buf);
+		chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
 	else
-		chip->ecc.write_page(mtd, chip, buf);
+		chip->ecc.write_page(mtd, chip, buf, oob_required);
 
 	/*
 	 * Cached progamming disabled for now. Not sure if it's worth the
@@ -2118,6 +2131,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 
 	if (chip->verify_buf(mtd, buf, mtd->writesize))
 		return -EIO;
+
+	/* Make sure the next page prog is preceded by a status read */
+	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 #endif
 	return 0;
 }
@@ -2202,6 +2218,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	uint8_t *oob = ops->oobbuf;
 	uint8_t *buf = ops->datbuf;
 	int ret, subpage;
+	int oob_required = oob ? 1 : 0;
 
 	ops->retlen = 0;
 	if (!writelen)
@@ -2264,8 +2281,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 			memset(chip->oob_poi, 0xff, mtd->oobsize);
 		}
 
-		ret = chip->write_page(mtd, chip, wbuf, page, cached,
-				       (ops->mode == MTD_OPS_RAW));
+		ret = chip->write_page(mtd, chip, wbuf, oob_required, page,
+				       cached, (ops->mode == MTD_OPS_RAW));
 		if (ret)
 			break;
 
@@ -2898,8 +2915,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		*busw = NAND_BUSWIDTH_16;
 
 	chip->options &= ~NAND_CHIPOPTIONS_MSK;
-	chip->options |= (NAND_NO_READRDY |
-			NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+	chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK;
 
 	pr_info("ONFI flash detected\n");
 	return 1;
@@ -3076,11 +3092,6 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
 ident_done:
 
-	/*
-	 * Set chip as a default. Board drivers can override it, if necessary.
-	 */
-	chip->options |= NAND_NO_AUTOINCR;
-
 	/* Try to identify manufacturer */
 	for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
 		if (nand_manuf_ids[maf_idx].id == *maf_id)
@@ -3154,10 +3165,11 @@ ident_done:
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
 		chip->cmdfunc = nand_command_lp;
 
-	pr_info("NAND device: Manufacturer ID:"
-		" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
-		nand_manuf_ids[maf_idx].name,
-		chip->onfi_version ? chip->onfi_params.model : type->name);
+	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
+		" page size: %d, OOB size: %d\n",
+		*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
+		chip->onfi_version ? chip->onfi_params.model : type->name,
+		mtd->writesize, mtd->oobsize);
 
 	return type;
 }
@@ -3329,8 +3341,13 @@ int nand_scan_tail(struct mtd_info *mtd)
 		if (!chip->ecc.write_oob)
 			chip->ecc.write_oob = nand_write_oob_syndrome;
 
-		if (mtd->writesize >= chip->ecc.size)
+		if (mtd->writesize >= chip->ecc.size) {
+			if (!chip->ecc.strength) {
+				pr_warn("Driver must set ecc.strength when using hardware ECC\n");
+				BUG();
+			}
 			break;
+		}
 		pr_warn("%d byte HW ECC not possible on "
 			   "%d byte page size, fallback to SW ECC\n",
 			   chip->ecc.size, mtd->writesize);
@@ -3385,7 +3402,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 			BUG();
 		}
 		chip->ecc.strength =
-			chip->ecc.bytes*8 / fls(8*chip->ecc.size);
+			chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
 		break;
 
 	case NAND_ECC_NONE:
@@ -3483,7 +3500,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	/* propagate ecc info to mtd_info */
 	mtd->ecclayout = chip->ecc.layout;
-	mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps;
+	mtd->ecc_strength = chip->ecc.strength;
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 20a112f..30d1319 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -324,6 +324,7 @@ static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 
 		buf += mtd->oobsize + mtd->writesize;
 		len -= mtd->writesize;
+		offs += mtd->writesize;
 	}
 	return 0;
 }
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index af4fe8c..621b70b 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -70,7 +70,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 * These are the new chips with large page size. The pagesize and the
 	 * erasesize is determined from the extended id bytes
 	 */
-#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY)
 #define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
 
 	/* 512 Megabit */
@@ -157,9 +157,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 * writes possible, but not implemented now
 	 */
 	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000,
-	 NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
-	 BBT_AUTO_REFRESH
-	},
+	 NAND_IS_AND | NAND_NO_READRDY | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
 
 	{NULL,}
 };
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261f478..6cc8fbf 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -268,7 +268,6 @@ MODULE_PARM_DESC(bch,		 "Enable BCH ecc and set how many bits should "
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@@ -594,7 +593,7 @@ static int init_nandsim(struct mtd_info *mtd)
 		ns->options |= OPT_PAGE256;
 	}
 	else if (ns->geom.pgsz == 512) {
-		ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
+		ns->options |= OPT_PAGE512;
 		if (ns->busw == 8)
 			ns->options |= OPT_PAGE512_8BIT;
 	} else if (ns->geom.pgsz == 2048) {
@@ -663,8 +662,6 @@ static int init_nandsim(struct mtd_info *mtd)
         for (i = 0; nand_flash_ids[i].name != NULL; i++) {
                 if (second_id_byte != nand_flash_ids[i].id)
                         continue;
-		if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
-			ns->options |= OPT_AUTOINCR;
 	}
 
 	if (ns->busw == 16)
@@ -1936,20 +1933,8 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
 	if (ns->regs.count == ns->regs.num) {
 		NS_DBG("read_byte: all bytes were read\n");
 
-		/*
-		 * The OPT_AUTOINCR allows to read next consecutive pages without
-		 * new read operation cycle.
-		 */
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
-
 	}
 
 	return outb;
@@ -2203,14 +2188,7 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	ns->regs.count += len;
 
 	if (ns->regs.count == ns->regs.num) {
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
 	}
 
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c2b0bba..d7f681d 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -21,6 +21,10 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+#include <linux/bch.h>
+#endif
+
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -127,6 +131,11 @@ struct omap_nand_info {
 	} iomode;
 	u_char				*buf;
 	int					buf_len;
+
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+	struct bch_control             *bch;
+	struct nand_ecclayout           ecclayout;
+#endif
 };
 
 /**
@@ -402,7 +411,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 			PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy method */
-		goto out_copy;
+		goto out_copy_unmap;
 
 	init_completion(&info->comp);
 
@@ -421,6 +430,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
 	return 0;
 
+out_copy_unmap:
+	dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
 out_copy:
 	if (info->nand.options & NAND_BUSWIDTH_16)
 		is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
@@ -879,7 +890,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	unsigned long timeo = jiffies;
-	int status = NAND_STATUS_FAIL, state = this->state;
+	int status, state = this->state;
 
 	if (state == FL_ERASING)
 		timeo += (HZ * 400) / 1000;
@@ -894,6 +905,8 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 			break;
 		cond_resched();
 	}
+
+	status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
 	return status;
 }
 
@@ -925,6 +938,226 @@ static int omap_dev_ready(struct mtd_info *mtd)
 	return 1;
 }
 
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+
+/**
+ * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
+static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+{
+	int nerrors;
+	unsigned int dev_width;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	struct nand_chip *chip = mtd->priv;
+
+	nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
+	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	/*
+	 * Program GPMC to perform correction on one 512-byte sector at a time.
+	 * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
+	 * gives a slight (5%) performance gain (but requires additional code).
+	 */
+	(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+}
+
+/**
+ * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
+static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
+				    u_char *ecc_code)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+}
+
+/**
+ * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
+static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
+				    u_char *ecc_code)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+}
+
+/**
+ * omap3_correct_data_bch - Decode received data and correct errors
+ * @mtd: MTD device structure
+ * @data: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ */
+static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data,
+				  u_char *read_ecc, u_char *calc_ecc)
+{
+	int i, count;
+	/* cannot correct more than 8 errors */
+	unsigned int errloc[8];
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+
+	count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL,
+			   errloc);
+	if (count > 0) {
+		/* correct errors */
+		for (i = 0; i < count; i++) {
+			/* correct data only, not ecc bytes */
+			if (errloc[i] < 8*512)
+				data[errloc[i]/8] ^= 1 << (errloc[i] & 7);
+			pr_debug("corrected bitflip %u\n", errloc[i]);
+		}
+	} else if (count < 0) {
+		pr_err("ecc unrecoverable error\n");
+	}
+	return count;
+}
+
+/**
+ * omap3_free_bch - Release BCH ecc resources
+ * @mtd: MTD device structure
+ */
+static void omap3_free_bch(struct mtd_info *mtd)
+{
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	if (info->bch) {
+		free_bch(info->bch);
+		info->bch = NULL;
+	}
+}
+
+/**
+ * omap3_init_bch - Initialize BCH ECC
+ * @mtd: MTD device structure
+ * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW)
+ */
+static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
+{
+	int ret, max_errors;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+#ifdef CONFIG_MTD_NAND_OMAP_BCH8
+	const int hw_errors = 8;
+#else
+	const int hw_errors = 4;
+#endif
+	info->bch = NULL;
+
+	max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4;
+	if (max_errors != hw_errors) {
+		pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported",
+		       max_errors, hw_errors);
+		goto fail;
+	}
+
+	/* initialize GPMC BCH engine */
+	ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
+	if (ret)
+		goto fail;
+
+	/* software bch library is only used to detect and locate errors */
+	info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
+	if (!info->bch)
+		goto fail;
+
+	info->nand.ecc.size    = 512;
+	info->nand.ecc.hwctl   = omap3_enable_hwecc_bch;
+	info->nand.ecc.correct = omap3_correct_data_bch;
+	info->nand.ecc.mode    = NAND_ECC_HW;
+
+	/*
+	 * The number of corrected errors in an ecc block that will trigger
+	 * block scrubbing defaults to the ecc strength (4 or 8).
+	 * Set mtd->bitflip_threshold here to define a custom threshold.
+	 */
+
+	if (max_errors == 8) {
+		info->nand.ecc.strength  = 8;
+		info->nand.ecc.bytes     = 13;
+		info->nand.ecc.calculate = omap3_calculate_ecc_bch8;
+	} else {
+		info->nand.ecc.strength  = 4;
+		info->nand.ecc.bytes     = 7;
+		info->nand.ecc.calculate = omap3_calculate_ecc_bch4;
+	}
+
+	pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors);
+	return 0;
+fail:
+	omap3_free_bch(mtd);
+	return -1;
+}
+
+/**
+ * omap3_init_bch_tail - Build an oob layout for BCH ECC correction.
+ * @mtd: MTD device structure
+ */
+static int omap3_init_bch_tail(struct mtd_info *mtd)
+{
+	int i, steps;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+						   mtd);
+	struct nand_ecclayout *layout = &info->ecclayout;
+
+	/* build oob layout */
+	steps = mtd->writesize/info->nand.ecc.size;
+	layout->eccbytes = steps*info->nand.ecc.bytes;
+
+	/* do not bother creating special oob layouts for small page devices */
+	if (mtd->oobsize < 64) {
+		pr_err("BCH ecc is not supported on small page devices\n");
+		goto fail;
+	}
+
+	/* reserve 2 bytes for bad block marker */
+	if (layout->eccbytes+2 > mtd->oobsize) {
+		pr_err("no oob layout available for oobsize %d eccbytes %u\n",
+		       mtd->oobsize, layout->eccbytes);
+		goto fail;
+	}
+
+	/* put ecc bytes at oob tail */
+	for (i = 0; i < layout->eccbytes; i++)
+		layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+
+	layout->oobfree[0].offset = 2;
+	layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
+	info->nand.ecc.layout = layout;
+
+	if (!(info->nand.options & NAND_BUSWIDTH_16))
+		info->nand.badblock_pattern = &bb_descrip_flashbased;
+	return 0;
+fail:
+	omap3_free_bch(mtd);
+	return -1;
+}
+
+#else
+static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
+{
+	pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n");
+	return -1;
+}
+static int omap3_init_bch_tail(struct mtd_info *mtd)
+{
+	return -1;
+}
+static void omap3_free_bch(struct mtd_info *mtd)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP_BCH */
+
 static int __devinit omap_nand_probe(struct platform_device *pdev)
 {
 	struct omap_nand_info		*info;
@@ -1063,6 +1296,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 		info->nand.ecc.hwctl            = omap_enable_hwecc;
 		info->nand.ecc.correct          = omap_correct_data;
 		info->nand.ecc.mode             = NAND_ECC_HW;
+	} else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+		   (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
+		err = omap3_init_bch(&info->mtd, pdata->ecc_opt);
+		if (err) {
+			err = -EINVAL;
+			goto out_release_mem_region;
+		}
 	}
 
 	/* DIP switches on some boards change between 8 and 16 bit
@@ -1094,6 +1334,14 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 					(offset + omap_oobinfo.eccbytes);
 
 		info->nand.ecc.layout = &omap_oobinfo;
+	} else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+		   (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
+		/* build OOB layout for BCH ECC correction */
+		err = omap3_init_bch_tail(&info->mtd);
+		if (err) {
+			err = -EINVAL;
+			goto out_release_mem_region;
+		}
 	}
 
 	/* second phase scan */
@@ -1122,6 +1370,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
+	omap3_free_bch(&info->mtd);
 
 	platform_set_drvdata(pdev, NULL);
 	if (info->dma_ch != -1)
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 974dbf8..1440e51 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -155,7 +155,6 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
 	chip->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	chip->options = NAND_NO_AUTOINCR;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 
 	/* Scan to find existence of the device */
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 6404e6e..1bcb520 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -23,14 +23,18 @@ struct plat_nand_data {
 	void __iomem		*io_base;
 };
 
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+
 /*
  * Probe for the NAND device.
  */
 static int __devinit plat_nand_probe(struct platform_device *pdev)
 {
 	struct platform_nand_data *pdata = pdev->dev.platform_data;
+	struct mtd_part_parser_data ppdata;
 	struct plat_nand_data *data;
 	struct resource *res;
+	const char **part_types;
 	int err = 0;
 
 	if (pdata->chip.nr_chips < 1) {
@@ -75,6 +79,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	data->chip.select_chip = pdata->ctrl.select_chip;
 	data->chip.write_buf = pdata->ctrl.write_buf;
 	data->chip.read_buf = pdata->ctrl.read_buf;
+	data->chip.read_byte = pdata->ctrl.read_byte;
 	data->chip.chip_delay = pdata->chip.chip_delay;
 	data->chip.options |= pdata->chip.options;
 	data->chip.bbt_options |= pdata->chip.bbt_options;
@@ -98,8 +103,10 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	err = mtd_device_parse_register(&data->mtd,
-					pdata->chip.part_probe_types, NULL,
+	part_types = pdata->chip.part_probe_types ? : part_probe_types;
+
+	ppdata.of_node = pdev->dev.of_node;
+	err = mtd_device_parse_register(&data->mtd, part_types, &ppdata,
 					pdata->chip.partitions,
 					pdata->chip.nr_partitions);
 
@@ -140,12 +147,19 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id plat_nand_match[] = {
+	{ .compatible = "gen_nand" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, plat_nand_match);
+
 static struct platform_driver plat_nand_driver = {
-	.probe		= plat_nand_probe,
-	.remove		= __devexit_p(plat_nand_remove),
-	.driver		= {
-		.name	= "gen_nand",
-		.owner	= THIS_MODULE,
+	.probe	= plat_nand_probe,
+	.remove	= __devexit_p(plat_nand_remove),
+	.driver	= {
+		.name		= "gen_nand",
+		.owner		= THIS_MODULE,
+		.of_match_table = plat_nand_match,
 	},
 };
 
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index def50ca..252aaef 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -682,14 +682,15 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 }
 
 static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
-		struct nand_chip *chip, const uint8_t *buf)
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
 {
 	chip->write_buf(mtd, buf, mtd->writesize);
 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
 }
 
 static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf, int page)
+		struct nand_chip *chip, uint8_t *buf, int oob_required,
+		int page)
 {
 	struct pxa3xx_nand_host *host = mtd->priv;
 	struct pxa3xx_nand_info *info = host->info_data;
@@ -1004,7 +1005,6 @@ KEEP_CONFIG:
 	chip->ecc.size = host->page_size;
 	chip->ecc.strength = 1;
 
-	chip->options = NAND_NO_AUTOINCR;
 	chip->options |= NAND_NO_READRDY;
 	if (host->reg_ndcr & NDCR_DWIDTH_M)
 		chip->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index c204018..8cb6277 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -539,14 +539,11 @@ exit:
  * nand_read_oob_syndrome assumes we can send column address - we can't
  */
 static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page, int sndcmd)
+			     int page)
 {
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
+	return 0;
 }
 
 /*
@@ -1104,18 +1101,7 @@ static struct pci_driver r852_pci_driver = {
 	.driver.pm	= &r852_pm_ops,
 };
 
-static __init int r852_module_init(void)
-{
-	return pci_register_driver(&r852_pci_driver);
-}
-
-static void __exit r852_module_exit(void)
-{
-	pci_unregister_driver(&r852_pci_driver);
-}
-
-module_init(r852_module_init);
-module_exit(r852_module_exit);
+module_pci_driver(r852_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e9b2b26..aa9b8a5 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -344,7 +344,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 }
 
 static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -359,14 +359,14 @@ static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		if (flctl->hwecc_cant_correct[i])
 			mtd->ecc_stats.failed++;
 		else
-			mtd->ecc_stats.corrected += 0;
+			mtd->ecc_stats.corrected += 0; /* FIXME */
 	}
 
 	return 0;
 }
 
 static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				   const uint8_t *buf)
+				   const uint8_t *buf, int oob_required)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -881,8 +881,6 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 	flctl->hwecc = pdata->has_hwecc;
 	flctl->holden = pdata->use_holden;
 
-	nand->options = NAND_NO_AUTOINCR;
-
 	/* Set address of hardware control function */
 	/* 20 us command delay time */
 	nand->chip_delay = 20;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 774c3c2..082bcdc 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -94,17 +94,16 @@ static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
 	{NULL,}
 };
 
-#define XD_TYPEM       (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
 static struct nand_flash_dev nand_xd_flash_ids[] = {
 
 	{"xD 16MiB 3,3V",    0x73, 512, 16, 0x4000, 0},
 	{"xD 32MiB 3,3V",    0x75, 512, 32, 0x4000, 0},
 	{"xD 64MiB 3,3V",    0x76, 512, 64, 0x4000, 0},
 	{"xD 128MiB 3,3V",   0x79, 512, 128, 0x4000, 0},
-	{"xD 256MiB 3,3V",   0x71, 512, 256, 0x4000, XD_TYPEM},
-	{"xD 512MiB 3,3V",   0xdc, 512, 512, 0x4000, XD_TYPEM},
-	{"xD 1GiB 3,3V",     0xd3, 512, 1024, 0x4000, XD_TYPEM},
-	{"xD 2GiB 3,3V",     0xd5, 512, 2048, 0x4000, XD_TYPEM},
+	{"xD 256MiB 3,3V",   0x71, 512, 256, 0x4000, NAND_BROKEN_XD},
+	{"xD 512MiB 3,3V",   0xdc, 512, 512, 0x4000, NAND_BROKEN_XD},
+	{"xD 1GiB 3,3V",     0xd3, 512, 1024, 0x4000, NAND_BROKEN_XD},
+	{"xD 2GiB 3,3V",     0xd5, 512, 2048, 0x4000, NAND_BROKEN_XD},
 	{NULL,}
 };
 
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index b3ce12e..7153e0d2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1201,7 +1201,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+	return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
 }
 
 /**
@@ -1333,7 +1334,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+	return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
 }
 
 /**
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 44dca1f..413ef89 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -32,6 +32,13 @@ struct jffs2_inodirty;
 struct jffs2_mount_opts {
 	bool override_compr;
 	unsigned int compr;
+
+	/* The size of the reserved pool. The reserved pool is the JFFS2 flash
+	 * space which may only be used by root cannot be used by the other
+	 * users. This is implemented simply by means of not allowing the
+	 * latter users to write to the file system if the amount if the
+	 * available space is less then 'rp_size'. */
+	unsigned int rp_size;
 };
 
 /* A struct for the overall file system control.  Pointers to
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index 6784d1e..0c96eb5 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -18,6 +18,37 @@
 #include "nodelist.h"
 #include "debug.h"
 
+/*
+ * Check whether the user is allowed to write.
+ */
+static int jffs2_rp_can_write(struct jffs2_sb_info *c)
+{
+	uint32_t avail;
+	struct jffs2_mount_opts *opts = &c->mount_opts;
+
+	avail = c->dirty_size + c->free_size + c->unchecked_size +
+		c->erasing_size - c->resv_blocks_write * c->sector_size
+		- c->nospc_dirty_size;
+
+	if (avail < 2 * opts->rp_size)
+		jffs2_dbg(1, "rpsize %u, dirty_size %u, free_size %u, "
+			  "erasing_size %u, unchecked_size %u, "
+			  "nr_erasing_blocks %u, avail %u, resrv %u\n",
+			  opts->rp_size, c->dirty_size, c->free_size,
+			  c->erasing_size, c->unchecked_size,
+			  c->nr_erasing_blocks, avail, c->nospc_dirty_size);
+
+	if (avail > opts->rp_size)
+		return 1;
+
+	/* Always allow root */
+	if (capable(CAP_SYS_RESOURCE))
+		return 1;
+
+	jffs2_dbg(1, "forbid writing\n");
+	return 0;
+}
+
 /**
  *	jffs2_reserve_space - request physical space to write nodes to flash
  *	@c: superblock info
@@ -55,6 +86,15 @@ int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize,
 
 	spin_lock(&c->erase_completion_lock);
 
+	/*
+	 * Check if the free space is greater then size of the reserved pool.
+	 * If not, only allow root to proceed with writing.
+	 */
+	if (prio != ALLOC_DELETION && !jffs2_rp_can_write(c)) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
 	/* this needs a little more thought (true <tglx> :)) */
 	while(ret == -EAGAIN) {
 		while(c->nr_free_blocks + c->nr_erasing_blocks < blocksneeded) {
@@ -158,6 +198,8 @@ int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize,
 			jffs2_dbg(1, "%s(): ret is %d\n", __func__, ret);
 		}
 	}
+
+out:
 	spin_unlock(&c->erase_completion_lock);
 	if (!ret)
 		ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, 1);
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index dc0437e..1ea349f 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1266,19 +1266,25 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
 			/* Symlink's inode data is the target path. Read it and
 			 * keep in RAM to facilitate quick follow symlink
 			 * operation. */
-			f->target = kmalloc(je32_to_cpu(latest_node->csize) + 1, GFP_KERNEL);
+			uint32_t csize = je32_to_cpu(latest_node->csize);
+			if (csize > JFFS2_MAX_NAME_LEN) {
+				mutex_unlock(&f->sem);
+				jffs2_do_clear_inode(c, f);
+				return -ENAMETOOLONG;
+			}
+			f->target = kmalloc(csize + 1, GFP_KERNEL);
 			if (!f->target) {
-				JFFS2_ERROR("can't allocate %d bytes of memory for the symlink target path cache\n", je32_to_cpu(latest_node->csize));
+				JFFS2_ERROR("can't allocate %u bytes of memory for the symlink target path cache\n", csize);
 				mutex_unlock(&f->sem);
 				jffs2_do_clear_inode(c, f);
 				return -ENOMEM;
 			}
 
 			ret = jffs2_flash_read(c, ref_offset(rii.latest_ref) + sizeof(*latest_node),
-						je32_to_cpu(latest_node->csize), &retlen, (char *)f->target);
+					       csize, &retlen, (char *)f->target);
 
-			if (ret  || retlen != je32_to_cpu(latest_node->csize)) {
-				if (retlen != je32_to_cpu(latest_node->csize))
+			if (ret || retlen != csize) {
+				if (retlen != csize)
 					ret = -EIO;
 				kfree(f->target);
 				f->target = NULL;
@@ -1287,7 +1293,7 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
 				return ret;
 			}
 
-			f->target[je32_to_cpu(latest_node->csize)] = '\0';
+			f->target[csize] = '\0';
 			dbg_readinode("symlink's target '%s' cached\n", f->target);
 		}
 
@@ -1415,6 +1421,7 @@ int jffs2_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *i
 		mutex_unlock(&f->sem);
 		jffs2_do_clear_inode(c, f);
 	}
+	jffs2_xattr_do_crccheck_inode(c, ic);
 	kfree (f);
 	return ret;
 }
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bc586f2..61ea413 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -90,6 +90,8 @@ static int jffs2_show_options(struct seq_file *s, struct dentry *root)
 
 	if (opts->override_compr)
 		seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+	if (opts->rp_size)
+		seq_printf(s, ",rp_size=%u", opts->rp_size / 1024);
 
 	return 0;
 }
@@ -154,15 +156,18 @@ static const struct export_operations jffs2_export_ops = {
  * JFFS2 mount options.
  *
  * Opt_override_compr: override default compressor
+ * Opt_rp_size: size of reserved pool in KiB
  * Opt_err: just end of array marker
  */
 enum {
 	Opt_override_compr,
+	Opt_rp_size,
 	Opt_err,
 };
 
 static const match_table_t tokens = {
 	{Opt_override_compr, "compr=%s"},
+	{Opt_rp_size, "rp_size=%u"},
 	{Opt_err, NULL},
 };
 
@@ -170,6 +175,7 @@ static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
 {
 	substring_t args[MAX_OPT_ARGS];
 	char *p, *name;
+	unsigned int opt;
 
 	if (!data)
 		return 0;
@@ -207,6 +213,17 @@ static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
 			kfree(name);
 			c->mount_opts.override_compr = true;
 			break;
+		case Opt_rp_size:
+			if (match_int(&args[0], &opt))
+				return -EINVAL;
+			opt *= 1024;
+			if (opt > c->mtd->size) {
+				pr_warn("Too large reserve pool specified, max "
+					"is %llu KB\n", c->mtd->size / 1024);
+				return -EINVAL;
+			}
+			c->mount_opts.rp_size = opt;
+			break;
 		default:
 			pr_err("Error: unrecognized mount option '%s' or missing value\n",
 			       p);
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index b55b803..3034e97 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -11,6 +11,8 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#define JFFS2_XATTR_IS_CORRUPTED	1
+
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
@@ -153,7 +155,7 @@ static int do_verify_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_dat
 		JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
 			    offset, je32_to_cpu(rx.hdr_crc), crc);
 		xd->flags |= JFFS2_XFLAGS_INVALID;
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	}
 	totlen = PAD(sizeof(rx) + rx.name_len + 1 + je16_to_cpu(rx.value_len));
 	if (je16_to_cpu(rx.magic) != JFFS2_MAGIC_BITMASK
@@ -169,7 +171,7 @@ static int do_verify_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_dat
 			    je32_to_cpu(rx.xid), xd->xid,
 			    je32_to_cpu(rx.version), xd->version);
 		xd->flags |= JFFS2_XFLAGS_INVALID;
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	}
 	xd->xprefix = rx.xprefix;
 	xd->name_len = rx.name_len;
@@ -227,12 +229,12 @@ static int do_load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum
 	data[xd->name_len] = '\0';
 	crc = crc32(0, data, length);
 	if (crc != xd->data_crc) {
-		JFFS2_WARNING("node CRC failed (JFFS2_NODETYPE_XREF)"
+		JFFS2_WARNING("node CRC failed (JFFS2_NODETYPE_XATTR)"
 			      " at %#08x, read: 0x%08x calculated: 0x%08x\n",
 			      ref_offset(xd->node), xd->data_crc, crc);
 		kfree(data);
 		xd->flags |= JFFS2_XFLAGS_INVALID;
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	}
 
 	xd->flags |= JFFS2_XFLAGS_HOT;
@@ -270,7 +272,7 @@ static int load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *x
 	if (xd->xname)
 		return 0;
 	if (xd->flags & JFFS2_XFLAGS_INVALID)
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	if (unlikely(is_xattr_datum_unchecked(c, xd)))
 		rc = do_verify_xattr_datum(c, xd);
 	if (!rc)
@@ -435,6 +437,8 @@ static void unrefer_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datu
  *   is called to release xattr related objects when unmounting. 
  * check_xattr_ref_inode(c, ic)
  *   is used to confirm inode does not have duplicate xattr name/value pair.
+ * jffs2_xattr_do_crccheck_inode(c, ic)
+ *   is used to force xattr data integrity check during the initial gc scan.
  * -------------------------------------------------- */
 static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref)
 {
@@ -462,7 +466,7 @@ static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref
 	if (crc != je32_to_cpu(rr.node_crc)) {
 		JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
 			    offset, je32_to_cpu(rr.node_crc), crc);
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	}
 	if (je16_to_cpu(rr.magic) != JFFS2_MAGIC_BITMASK
 	    || je16_to_cpu(rr.nodetype) != JFFS2_NODETYPE_XREF
@@ -472,7 +476,7 @@ static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref
 			    offset, je16_to_cpu(rr.magic), JFFS2_MAGIC_BITMASK,
 			    je16_to_cpu(rr.nodetype), JFFS2_NODETYPE_XREF,
 			    je32_to_cpu(rr.totlen), PAD(sizeof(rr)));
-		return -EIO;
+		return JFFS2_XATTR_IS_CORRUPTED;
 	}
 	ref->ino = je32_to_cpu(rr.ino);
 	ref->xid = je32_to_cpu(rr.xid);
@@ -682,6 +686,11 @@ static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cac
 	return rc;
 }
 
+void jffs2_xattr_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
+{
+	check_xattr_ref_inode(c, ic);
+}
+
 /* -------- xattr subsystem functions ---------------
  * jffs2_init_xattr_subsystem(c)
  *   is used to initialize semaphore and list_head, and some variables.
diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
index 7be4beb..467ff37 100644
--- a/fs/jffs2/xattr.h
+++ b/fs/jffs2/xattr.h
@@ -77,6 +77,7 @@ extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
 extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
 							 uint32_t xid, uint32_t version);
 
+extern void jffs2_xattr_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
 extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
 extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
 
@@ -108,6 +109,7 @@ extern ssize_t jffs2_listxattr(struct dentry *, char *, size_t);
 #define jffs2_build_xattr_subsystem(c)
 #define jffs2_clear_xattr_subsystem(c)
 
+#define jffs2_xattr_do_crccheck_inode(c, ic)
 #define jffs2_xattr_delete_inode(c, ic)
 #define jffs2_xattr_free_inode(c, ic)
 #define jffs2_verify_xattr(c)			(1)
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
index 69b6dbf..ed3c4e0 100644
--- a/include/linux/mtd/gpmi-nand.h
+++ b/include/linux/mtd/gpmi-nand.h
@@ -23,12 +23,12 @@
 #define GPMI_NAND_RES_SIZE	6
 
 /* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
 #define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
 #define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
 
 /**
  * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index cf5ea8c..63dadc0 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -157,6 +157,15 @@ struct mtd_info {
 	unsigned int erasesize_mask;
 	unsigned int writesize_mask;
 
+	/*
+	 * read ops return -EUCLEAN if max number of bitflips corrected on any
+	 * one region comprising an ecc step equals or exceeds this value.
+	 * Settable by driver, else defaults to ecc_strength.  User can override
+	 * in sysfs.  N.B. The meaning of the -EUCLEAN return code has changed;
+	 * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
+	 */
+	unsigned int bitflip_threshold;
+
 	// Kernel-only stuff starts here.
 	const char *name;
 	int index;
@@ -164,7 +173,7 @@ struct mtd_info {
 	/* ECC layout structure pointer - read only! */
 	struct nand_ecclayout *ecclayout;
 
-	/* max number of correctible bit errors per writesize */
+	/* max number of correctible bit errors per ecc step */
 	unsigned int ecc_strength;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 1482340..57977c6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -161,8 +161,6 @@ typedef enum {
  * Option constants for bizarre disfunctionality and real
  * features.
  */
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR	0x00000001
 /* Buswidth is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */
@@ -207,7 +205,6 @@ typedef enum {
 	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
 
 /* Macros to identify the above */
-#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
@@ -216,7 +213,7 @@ typedef enum {
 					&& (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
-#define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
+#define NAND_CHIPOPTIONS_MSK	0x0000ffff
 
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
@@ -363,21 +360,20 @@ struct nand_ecc_ctrl {
 	int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
 			uint8_t *calc_ecc);
 	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
+			uint8_t *buf, int oob_required, int page);
 	void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
+			const uint8_t *buf, int oob_required);
 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
+			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offs, uint32_t len, uint8_t *buf);
 	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
+			const uint8_t *buf, int oob_required);
 	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
 			int page);
 	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page, int sndcmd);
-	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
-			int sndcmd);
+			int page);
+	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
 	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
 			int page);
 };
@@ -459,6 +455,8 @@ struct nand_buffers {
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
  * @pagebuf:		[INTERN] holds the pagenumber which is currently in
  *			data_buf.
+ * @pagebuf_bitflips:	[INTERN] holds the bitflip count for the page which is
+ *			currently in data_buf.
  * @subpagesize:	[INTERN] holds the subpagesize
  * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
  *			non 0 if ONFI supported.
@@ -505,7 +503,8 @@ struct nand_chip {
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int page, int cached, int raw);
+			const uint8_t *buf, int oob_required, int page,
+			int cached, int raw);
 
 	int chip_delay;
 	unsigned int options;
@@ -519,6 +518,7 @@ struct nand_chip {
 	uint64_t chipsize;
 	int pagemask;
 	int pagebuf;
+	unsigned int pagebuf_bitflips;
 	int subpagesize;
 	uint8_t cellinfo;
 	int badblockpos;
@@ -654,6 +654,7 @@ struct platform_nand_ctrl {
 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+	unsigned char (*read_byte)(struct mtd_info *mtd);
 	void *priv;
 };