treewide: fix a few typos in comments

- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

48 files changed, 53 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index a7e155a..36afa32 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -127,7 +127,7 @@ Nintendo Wii device tree
    - reg : should contain the SDHCI registers location and length
    - interrupts : should contain the SDHCI interrupt
 
-1.j) The Inter-Processsor Communication (IPC) node
+1.j) The Inter-Processor Communication (IPC) node
 
   Represent the Inter-Processor Communication interface. This interface
   enables communications between the Broadway and the Starlet processors.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 492e81d..9536652 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -226,7 +226,7 @@ Who:	Zhang Rui <rui.zhang@intel.com>
 What:	CONFIG_ACPI_PROCFS_POWER
 When:	2.6.39
 Why:	sysfs I/F for ACPI power devices, including AC and Battery,
-        has been working in upstream kenrel since 2.6.24, Sep 2007.
+        has been working in upstream kernel since 2.6.24, Sep 2007.
 	In 2.6.37, we make the sysfs I/F always built in and this option
 	disabled by default.
 	Remove this option and the ACPI power procfs interface in 2.6.39.
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index c98c759..2f494b6 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -55,7 +55,7 @@
 
 #include "msm_iomap-8960.h"
 
-/* Virtual addressses shared across all MSM targets. */
+/* Virtual addresses shared across all MSM targets. */
 #define MSM_CSR_BASE		IOMEM(0xE0001000)
 #define MSM_QGIC_DIST_BASE	IOMEM(0xF0000000)
 #define MSM_QGIC_CPU_BASE	IOMEM(0xF0001000)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c2804c1..a016c8b 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -236,7 +236,7 @@
 #define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
 #define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
-/* 36xx-only RTA - Retention till Accesss control registers and bits */
+/* 36xx-only RTA - Retention till Access control registers and bits */
 #define OMAP36XX_CONTROL_MEM_RTA_CTRL	0x40C
 #define OMAP36XX_RTA_DISABLE		0x0
 
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 4ce8d13..ab3ccab 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
 		/*
 		** Address does not fall w/in IOVA, must be bypassing
 		*/
-		DBG_BYPASS("sba_unmap_single_atttrs() bypass addr: 0x%lx\n",
+		DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n",
 			   iova);
 
 #ifdef ENABLE_MARK_CLEAN
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index c4490f9..59247e8 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -22,7 +22,7 @@
 #define _PAGE_HASHPTE	_PAGE_HPTE_SUB
 
 /* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
+ * 4k pages as the same assembly will be used to insert 64K pages
  * wether the kernel has CONFIG_PPC_64K_PAGES or not
  */
 #define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 42850ee..9411747 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -142,7 +142,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		return 0;
 
 	/*
-	 * On Book E and perhaps other processsors, singlestep is handled on
+	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
 	 * to fail, since it it locates the thread_info by masking off
 	 * the low bits of the current stack pointer.  We work around
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index bfd0632..b480d42 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -36,7 +36,7 @@ int __init pci_xen_swiotlb_detect(void)
 
 	/* If running as PV guest, either iommu=soft, or swiotlb=force will
 	 * activate this IOMMU. If running as PV privileged, activate it
-	 * irregardlesss.
+	 * irregardless.
 	 */
 	if ((xen_initial_domain() || swiotlb || swiotlb_force) &&
 	    (xen_pv_domain()))
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 84e0518..6ffd3a8 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc")
 #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
 /*
  * Strings used to decode resource descriptors.
- * Used by both the disasssembler and the debugger resource dump routines
+ * Used by both the disassembler and the debugger resource dump routines
  */
 const char *acpi_gbl_bm_decode[] = {
 	"NotBusMaster",
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ec574fc..db39e9e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
 		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_BRIGHTNESSDOWN;
 		break;
-	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:	/* zero brightnesss */
+	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:	/* zero brightness */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
 		acpi_bus_generate_proc_event(device, event, 0);
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373..5629a0c 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf)
 
 /*
  * Generic read/write functions that call the specific functions of
- * the atttributes...
+ * the attributes...
  */
 static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
 				char *buf)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bb8b722..0ff92c2 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -44,11 +44,11 @@
  * TODO:  - Check MPU structure version/signature
  *        - Add things like /sbin/overtemp for non-critical
  *          overtemp conditions so userland can take some policy
- *          decisions, like slewing down CPUs
+ *          decisions, like slowing down CPUs
  *	  - Deal with fan and i2c failures in a better way
  *	  - Maybe do a generic PID based on params used for
  *	    U3 and Drives ? Definitely need to factor code a bit
- *          bettter... also make sensor detection more robust using
+ *          better... also make sensor detection more robust using
  *          the device-tree to probe for them
  *        - Figure out how to get the slots consumption and set the
  *          slots fan accordingly
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index f5b9da1..d312323 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = {
 	{ 0x0f, KEY_BLUE },	/* bottom yellow button */
 	{ 0x14, KEY_AUDIO },	/* Snapshot */
 	{ 0x38, KEY_TV },	/* TV/Radio */
-	{ 0x0c, KEY_ESC }	/* upper Red buttton */
+	{ 0x0c, KEY_ESC }	/* upper Red button */
 };
 
 static struct rc_map_dvb_usb_table_table keys_tables[] = {
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 8126622..de5d481 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
 MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
 MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
 MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
+MODULE_PARM_DESC(dolby, "Activates Dolby processing");
 
 /* ---------------------------------------------------------------------- */
 
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index f9d5946..4003645 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
 		}
 	}
 
-	/* Allocate some kenrel kernel buffers for copying
+	/* Allocate some kernel buffers for copying
 	 * to userpsace.
 	 */
 	len = params->numberoflines * params->pitch;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 9e5b01c..bc1fced 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
 		}
 	}
 
-	/* Allocate some kenrel kernel buffers for copying
+	/* Allocate some kernel buffers for copying
 	 * to userpsace.
 	 */
 	len = params->numberoflines * params->pitch;
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 65c0c47..5fb195af4 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -110,7 +110,7 @@ V. Getting Logical Configuration Table
       ENOBUFS     Buffer not large enough.  If this occurs, the required
                   buffer length is written into *(lct->reslen)
 
-VI. Settting Parameters
+VI. Setting Parameters
    
    SYNOPSIS 
  
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b..d11fbb2 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
 	u16 data_reg;
 
 	do {
-		/* Reading the messsage object from the Message RAM */
+		/* Reading the message object from the Message RAM */
 		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
 		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
 
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+		IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..665c3d8 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
 		/* As per the HW requirement we need to replenish the
 		 * receive buffer to avoid the ring bump. Since there is
 		 * no intention of processing the Rx frame at this pointwe are
-		 * just settting the ownership bit of rxd in Each Rx
+		 * just setting the ownership bit of rxd in Each Rx
 		 * ring to HW and set the appropriate buffer size
 		 * based on the ring mode
 		 */
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..cfd8881 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
  * Author: Li Yang <leoli@freescale.com>
  *
  * Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
  * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..fef9ecc 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
 
 		/* take the first altsetting with in-bulk + out-bulk;
 		 * remember any status endpoint, just in case;
-		 * ignore other endpoints and altsetttings.
+		 * ignore other endpoints and altsettings.
 		 */
 		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 			struct usb_host_endpoint	*e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfa..737b59f 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)
  * Description:	In the remote loopback mode the clock and data recovered
  *		from the line inputs RL1/2 or RDIP/RDIN are routed back
  *		to the line outputs XL1/2 or XDOP/XDON via the analog
- *		transmitter. As in normal mode they are processsed by
+ *		transmitter. As in normal mode they are processed by
  *		the synchronizer and then sent to the system interface.
  *----------------------------------------------------------------------------
  */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..aa1ba5d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3329,26 +3329,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 	else
 		cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	read = ar9300_read_otp;
 	cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe3..87813c3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv,
 		priv->assoc_request.capability &=
 		    ~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
 
-	IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+	IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
 			"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
 			roaming ? "Rea" : "A",
 			print_ssid(ssid, priv->essid, priv->essid_len),
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
index 078ed60..232aff1 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
@@ -1,5 +1,5 @@
 /*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation
+ * Aic7xxx SCSI host adapter firmware assembler symbol table implementation
  *
  * Copyright (c) 1997 Justin T. Gibbs.
  * Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
index 2ba73ae..34bbcad 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
@@ -1,5 +1,5 @@
 /*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions
+ * Aic7xxx SCSI host adapter firmware assembler symbol table definitions
  *
  * Copyright (c) 1997 Justin T. Gibbs.
  * Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d0c8234..d0cdde5 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -34,7 +34,7 @@
 static const char * cdb_byte0_names[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
-	    "Reasssign Blocks",
+	    "Reassign Blocks",
 /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
 /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 5755852..182831e 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1059,7 +1059,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp,
 	esp->ops->send_dma_cmd(esp, esp->command_block_dma,
 			       2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI);
 
-	/* ACK the msssage.  */
+	/* ACK the message.  */
 	scsi_esp_cmd(esp, ESP_CMD_MOK);
 
 	for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) {
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 17d7893..8dcbf8f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
  *
  * This function is called by the lpfc_get_cfgparam() routine to set the
  * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
- * log messsage according to the module's lpfc_log_verbose parameter setting
+ * log message according to the module's lpfc_log_verbose parameter setting
  * before hba port or vport created.
  **/
 static void
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 95f11ed..86b6f7e 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT {	/* Structure is in Big Endian format */
 #define  SLI_MGMT_GRPL     0x102	/* Get registered Port list */
 #define  SLI_MGMT_GPAT     0x110	/* Get Port attributes */
 #define  SLI_MGMT_RHBA     0x200	/* Register HBA */
-#define  SLI_MGMT_RHAT     0x201	/* Register HBA atttributes */
+#define  SLI_MGMT_RHAT     0x201	/* Register HBA attributes */
 #define  SLI_MGMT_RPRT     0x210	/* Register Port */
 #define  SLI_MGMT_RPA      0x211	/* Register Port attributes */
 #define  SLI_MGMT_DHBA     0x300	/* De-register HBA */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dacabbe..63c5d62 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
 	pring->iocb_continueq_cnt++;
 
-	/* Now, determine whetehr the list is completed for processing */
+	/* Now, determine whether the list is completed for processing */
 	irsp = &rspiocbp->iocb;
 	if (irsp->ulpLe) {
 		/*
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index 2fb3fb5..58806f4 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN";
 
 static const char * group_0_commands[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
 /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
 /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
 /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 3c6ef64..6aa7d26 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN";
 
 static const char * group_0_commands[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
 /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
 /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
 /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index f9d81c8..d78b58d 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -19,7 +19,7 @@
  * @mbx_cmd: data pointer for mailbox in registers.
  * @mbx_sts: data pointer for mailbox out registers.
  *
- * This routine isssue mailbox commands and waits for completion.
+ * This routine issue mailbox commands and waits for completion.
  * If outCount is 0, this routine completes successfully WITHOUT waiting
  * for the mailbox command to complete.
  **/
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 74273e6..77623b9 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2128,7 +2128,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 
 /**
  *	gsmld_detach_gsm	-	stop doing 0710 mux
- *	@tty: tty atttached to the mux
+ *	@tty: tty attached to the mux
  *	@gsm: mux
  *
  *	Shutdown and then clean up the resources used by the line discipline
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 512f647..6d75334 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s,
 	seq_printf(s, "%s %d:\n"
 		"cc=0X%02X\n"
 		"scheduled frame %d (%d)\n"
-		"submittted frame %d (%d)\n"
+		"submitted frame %d (%d)\n"
 		"completed frame %d (%d)\n"
 		"requested length=%d\n"
 		"completed length=%d\n\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 388cc12..ff9a01f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 		alt = intf->altsetting + tmp;
 
 		/* take the first altsetting with in-bulk + out-bulk;
-		 * ignore other endpoints and altsetttings.
+		 * ignore other endpoints and altsettings.
 		 */
 		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 			struct usb_host_endpoint	*e;
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 199a801..f340f7c 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -709,7 +709,7 @@ again:
 	WARN_ON(cur->checked);
 	if (!list_empty(&cur->upper)) {
 		/*
-		 * the backref was added previously when processsing
+		 * the backref was added previously when processing
 		 * backref of type BTRFS_TREE_BLOCK_REF_KEY
 		 */
 		BUG_ON(!list_is_singular(&cur->upper));
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 2ba6719..1a43114 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -272,7 +272,7 @@ vxfs_get_fake_inode(struct super_block *sbp, struct vxfs_inode_info *vip)
  * *ip:			VFS inode
  *
  * Description:
- *  vxfs_put_fake_inode frees all data asssociated with @ip.
+ *  vxfs_put_fake_inode frees all data associated with @ip.
  */
 void
 vxfs_put_fake_inode(struct inode *ip)
diff --git a/fs/nfsd/stats.c b/fs/nfsd/stats.c
index 5232d3e..a2e2402 100644
--- a/fs/nfsd/stats.c
+++ b/fs/nfsd/stats.c
@@ -8,7 +8,7 @@
  *			Statistsics for the reply cache
  *	fh <stale> <total-lookups> <anonlookups> <dir-not-in-dcache> <nondir-not-in-dcache>
  *			statistics for filehandle lookup
- *	io <bytes-read> <bytes-writtten>
+ *	io <bytes-read> <bytes-written>
  *			statistics for IO throughput
  *	th <threads> <fullcnt> <10%-20%> <20%-30%> ... <90%-100%> <100%> 
  *			time (seconds) when nfsd thread usage above thresholds
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index efc309f..7797218 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -42,7 +42,7 @@ config SQUASHFS_LZO
 	select LZO_DECOMPRESS
 	help
 	  Saying Y here includes support for reading Squashfs file systems
-	  compressed with LZO compresssion.  LZO compression is mainly
+	  compressed with LZO compression.  LZO compression is mainly
 	  aimed at embedded systems with slower CPUs where the overheads
 	  of zlib are too high.
 
@@ -57,7 +57,7 @@ config SQUASHFS_XZ
 	select XZ_DEC
 	help
 	  Saying Y here includes support for reading Squashfs file systems
-	  compressed with XZ compresssion.  XZ gives better compression than
+	  compressed with XZ compression.  XZ gives better compression than
 	  the default zlib compression, at the expense of greater CPU and
 	  memory overhead.
 
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index c37b520..4b5a3fb 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -29,7 +29,7 @@
  * plus functions layered ontop of the generic cache implementation to
  * access the metadata and fragment caches.
  *
- * To avoid out of memory and fragmentation isssues with vmalloc the cache
+ * To avoid out of memory and fragmentation issues with vmalloc the cache
  * uses sequences of kmalloced PAGE_CACHE_SIZE buffers.
  *
  * It should be noted that the cache is not used for file datablocks, these
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index a37480a..d11ce61 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1470,7 +1470,7 @@ xfs_itruncate_finish(
 	 * file but the log buffers containing the free and reallocation
 	 * don't, then we'd end up with garbage in the blocks being freed.
 	 * As long as we make the new_size permanent before actually
-	 * freeing any blocks it doesn't matter if they get writtten to.
+	 * freeing any blocks it doesn't matter if they get written to.
 	 *
 	 * The callers must signal into us whether or not the size
 	 * setting here must be synchronous.  There are a few cases
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
index 7f1183dc..34c4498 100644
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -45,7 +45,7 @@ struct posix_clock;
  * @timer_create:   Create a new timer
  * @timer_delete:   Remove a previously created timer
  * @timer_gettime:  Get remaining time and interval of a timer
- * @timer_setttime: Set a timer's initial expiration and interval
+ * @timer_settime: Set a timer's initial expiration and interval
  * @fasync:         Optional character device fasync method
  * @mmap:           Optional character device mmap method
  * @open:           Optional character device open method
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index b4c7c1c..d420f28 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -260,7 +260,7 @@ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info)
 
 /**
  * gennlmsg_data - head of message payload
- * @gnlh: genetlink messsage header
+ * @gnlh: genetlink message header
  */
 static inline void *genlmsg_data(const struct genlmsghdr *gnlh)
 {
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 8a3906a..02740a9 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -290,7 +290,7 @@ static inline int nlmsg_padlen(int payload)
 
 /**
  * nlmsg_data - head of message payload
- * @nlh: netlink messsage header
+ * @nlh: netlink message header
  */
 static inline void *nlmsg_data(const struct nlmsghdr *nlh)
 {
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 1a10dcd..6c014dd 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -333,7 +333,7 @@ static void rq_cq_reap(struct svcxprt_rdma *xprt)
 }
 
 /*
- * Processs a completion context
+ * Process a completion context
  */
 static void process_context(struct svcxprt_rdma *xprt,
 			    struct svc_rdma_op_ctxt *ctxt)