summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArnd Hannemann <arnd@arndnet.de>2010-09-10 18:54:20 +0200
committerSamuel Ortiz <sameo@linux.intel.com>2010-10-29 00:29:14 +0200
commit68accd7370a90b899ea6563ba9032e5a102ec1b5 (patch)
tree8b4df083ccea7a30f90f18b0858e7299c1089040
parent777271d0f33da306575ef776c75f66fc27246bf0 (diff)
downloadop-kernel-dev-68accd7370a90b899ea6563ba9032e5a102ec1b5.zip
op-kernel-dev-68accd7370a90b899ea6563ba9032e5a102ec1b5.tar.gz
ARM: mach-shmobile: ap4evb: Fix hotplug for SDHI1
On AP4EVB the card detect pin of the top SD/MMC slot is not directly connected to the tmio/mmcif controller but to a GPIO pin, so polling needs to be done for SDHI1 and MMCIF in order to support hotplug for that slot. SHDI1 and MMCIF share that slot, and the used controller is selected by a DIP switch. This patch adds a helper function to check if a card is present in that particular slot, registers this function with SDHI1 and MMCIF and enables polling for SDHI1. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c19
1 files changed, 19 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 1492398..22a2b44 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -235,6 +235,18 @@ static struct platform_device smc911x_device = {
},
};
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO_PORT41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+ if (gpio_is_valid(GPIO_PORT41))
+ return !gpio_get_value(GPIO_PORT41);
+ else
+ return -ENXIO;
+}
+
/* SH_MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
@@ -261,6 +273,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
+ .get_cd = slot_cn7_get_cd,
};
static struct platform_device sh_mmcif_device = {
@@ -310,6 +323,8 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_ocr_mask = MMC_VDD_165_195,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_NEEDS_POLL,
+ .get_cd = slot_cn7_get_cd,
};
static struct resource sdhi1_resources[] = {
@@ -948,6 +963,10 @@ static void __init ap4evb_init(void)
gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+ /* card detect pin for MMC slot (CN7) */
+ gpio_request(GPIO_PORT41, NULL);
+ gpio_direction_input(GPIO_PORT41);
+
/* set SPU2 clock to 119.6 MHz */
clk = clk_get(NULL, "spu_clk");
if (!IS_ERR(clk)) {
OpenPOWER on IntegriCloud