summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-28 18:56:37 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-28 18:56:37 -0800
commit0e47c969c65e213421450c31043353ebe3c67e0c (patch)
tree5057541fd3dc3521cb0946880d6925f1185dc7b7
parent268943fb7529a15254a5247372119ba4bd735e94 (diff)
parent0ff76a920e3558307567b45aa0a91fb914924bfc (diff)
downloadop-kernel-dev-0e47c969c65e213421450c31043353ebe3c67e0c.zip
op-kernel-dev-0e47c969c65e213421450c31043353ebe3c67e0c.tar.gz
Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get David's "ack" for this; I'm sure he approves, but he's been pretty silent lately) - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver - Last (?) round of pxa3xx improvements for supporting Armada 370/XP - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.) - Quad read mode support for SPI NOR driver (m25p80) - Update Davinci NAND driver to prepare for use on new platforms - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending - Miscellaneous NAND device support (new IDs) - Add READ RETRY support for Micron MLC NAND - Support new GPMI NAND ECC layout device-tree binding - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA * tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits) mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf mtd: gpmi: allocate a proper buffer for non ECC read/write mtd: m25p80: Set rx_nbits for Quad SPI transfers mtd: m25p80: Enable Quad SPI read transfers for s25fl512s mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c mtd: mtdram: add missing 'const' mtd: m25p80: assign default read command mtd: nuc900_nand: remove redundant return value check of platform_get_resource() mtd: plat_nand: remove redundant return value check of platform_get_resource() mtd: nand: add Intel manufacturer ID mtd: nand: add SanDisk manufacturer ID mtd: nand: add support for Samsung K9LCG08U0B mtd: nand: pxa3xx: Add support for 2048 bytes page size devices mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing mtd: nand: don't use {read,write}_buf for 8-bit transfers mtd: nand: use __packed shorthand mtd: nand: support Micron READ RETRY mtd: nand: add generic READ RETRY support mtd: nand: add ONFI vendor block for Micron mtd: nand: localize ECC failures per page ...
-rw-r--r--Documentation/devicetree/bindings/arm/davinci/nand.txt46
-rw-r--r--Documentation/devicetree/bindings/mtd/davinci-nand.txt94
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt8
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt6
-rw-r--r--Documentation/mtd/nand/pxa3xx-nand.txt113
-rw-r--r--MAINTAINERS9
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-nand.h123
-rw-r--r--drivers/mtd/Kconfig7
-rw-r--r--drivers/mtd/afs.c3
-rw-r--r--drivers/mtd/ar7part.c3
-rw-r--r--drivers/mtd/bcm47xxpart.c27
-rw-r--r--drivers/mtd/bcm63xxpart.c3
-rw-r--r--drivers/mtd/cmdlinepart.c3
-rw-r--r--drivers/mtd/devices/docg3.c20
-rw-r--r--drivers/mtd/devices/m25p80.c226
-rw-r--r--drivers/mtd/devices/ms02-nv.c2
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c5
-rw-r--r--drivers/mtd/devices/mtdram.c2
-rw-r--r--drivers/mtd/lpddr/lpddr_cmds.c32
-rw-r--r--drivers/mtd/maps/ixp4xx.c28
-rw-r--r--drivers/mtd/maps/lantiq-flash.c37
-rw-r--r--drivers/mtd/maps/pxa2xx-flash.c2
-rw-r--r--drivers/mtd/maps/sun_uflash.c2
-rw-r--r--drivers/mtd/mtdcore.c10
-rw-r--r--drivers/mtd/mtdpart.c9
-rw-r--r--drivers/mtd/nand/Kconfig14
-rw-r--r--drivers/mtd/nand/atmel_nand.c8
-rw-r--r--drivers/mtd/nand/au1550nd.c6
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c1
-rw-r--r--drivers/mtd/nand/cafe_nand.c4
-rw-r--r--drivers/mtd/nand/cmx270_nand.c1
-rw-r--r--drivers/mtd/nand/cs553x_nand.c1
-rw-r--r--drivers/mtd/nand/davinci_nand.c93
-rw-r--r--drivers/mtd/nand/denali.c53
-rw-r--r--drivers/mtd/nand/denali.h4
-rw-r--r--drivers/mtd/nand/denali_dt.c4
-rw-r--r--drivers/mtd/nand/denali_pci.c3
-rw-r--r--drivers/mtd/nand/diskonchip.c13
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c3
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c3
-rw-r--r--drivers/mtd/nand/fsmc_nand.c16
-rw-r--r--drivers/mtd/nand/gpio.c12
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c127
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c207
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h2
-rw-r--r--drivers/mtd/nand/jz4740_nand.c4
-rw-r--r--drivers/mtd/nand/lpc32xx_mlc.c26
-rw-r--r--drivers/mtd/nand/lpc32xx_slc.c19
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c10
-rw-r--r--drivers/mtd/nand/mxc_nand.c25
-rw-r--r--drivers/mtd/nand/nand_base.c183
-rw-r--r--drivers/mtd/nand/nand_ids.c2
-rw-r--r--drivers/mtd/nand/nuc900_nand.c54
-rw-r--r--drivers/mtd/nand/omap2.c8
-rw-r--r--drivers/mtd/nand/orion_nand.c4
-rw-r--r--drivers/mtd/nand/pasemi_nand.c2
-rw-r--r--drivers/mtd/nand/plat_nand.c40
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c713
-rw-r--r--drivers/mtd/nand/s3c2410.c38
-rw-r--r--drivers/mtd/nand/sh_flctl.c55
-rw-r--r--drivers/mtd/nand/sharpsl.c6
-rw-r--r--drivers/mtd/nand/tmio_nand.c46
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c5
-rw-r--r--drivers/mtd/ofpart.c19
-rw-r--r--drivers/mtd/onenand/generic.c2
-rw-r--r--drivers/mtd/redboot.c3
-rw-r--r--drivers/mtd/tests/mtd_nandecctest.c2
-rw-r--r--fs/jffs2/malloc.c4
-rw-r--r--include/linux/mtd/mtdram.h2
-rw-r--r--include/linux/mtd/nand.h41
-rw-r--r--include/linux/mtd/partitions.h8
-rw-r--r--include/linux/of_mtd.h2
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h2
-rw-r--r--include/linux/platform_data/mtd-nand-pxa3xx.h3
-rw-r--r--include/linux/platform_data/mtd-onenand-omap2.h2
-rw-r--r--include/linux/platform_data/mtd-orion_nand.h6
76 files changed, 1688 insertions, 1043 deletions
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
deleted file mode 100644
index 3545ea7..0000000
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Texas Instruments Davinci NAND
-
-This file provides information, what the device node for the
-davinci nand interface contain.
-
-Required properties:
-- compatible: "ti,davinci-nand";
-- reg : contain 2 offset/length values:
- - offset and length for the access window
- - offset and length for accessing the aemif control registers
-- ti,davinci-chipselect: Indicates on the davinci_nand driver which
- chipselect is used for accessing the nand.
-
-Recommended properties :
-- ti,davinci-mask-ale: mask for ale
-- ti,davinci-mask-cle: mask for cle
-- ti,davinci-mask-chipsel: mask for chipselect
-- ti,davinci-ecc-mode: ECC mode valid values for davinci driver:
- - "none"
- - "soft"
- - "hw"
-- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4.
-- ti,davinci-nand-buswidth: buswidth 8 or 16
-- ti,davinci-nand-use-bbt: use flash based bad block table support.
-
-nand device bindings may contain additional sub-nodes describing
-partitions of the address space. See partition.txt for more detail.
-
-Example(da850 EVM ):
-nand_cs3@62000000 {
- compatible = "ti,davinci-nand";
- reg = <0x62000000 0x807ff
- 0x68000000 0x8000>;
- ti,davinci-chipselect = <1>;
- ti,davinci-mask-ale = <0>;
- ti,davinci-mask-cle = <0>;
- ti,davinci-mask-chipsel = <0>;
- ti,davinci-ecc-mode = "hw";
- ti,davinci-ecc-bits = <4>;
- ti,davinci-nand-use-bbt;
-
- partition@180000 {
- label = "ubifs";
- reg = <0x180000 0x7e80000>;
- };
-};
diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
new file mode 100644
index 0000000..cfb18ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -0,0 +1,94 @@
+Device tree bindings for Texas instruments Davinci/Keystone NAND controller
+
+This file provides information, what the device node for the davinci/keystone
+NAND interface contains.
+
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+
+Required properties:
+
+- compatible: "ti,davinci-nand"
+ "ti,keystone-nand"
+
+- reg: Contains 2 offset/length values:
+ - offset and length for the access window.
+ - offset and length for accessing the AEMIF
+ control registers.
+
+- ti,davinci-chipselect: number of chipselect. Indicates on the
+ davinci_nand driver which chipselect is used
+ for accessing the nand.
+ Can be in the range [0-3].
+
+Recommended properties :
+
+- ti,davinci-mask-ale: mask for ALE. Needed for executing address
+ phase. These offset will be added to the base
+ address for the chip select space the NAND Flash
+ device is connected to.
+ If not set equal to 0x08.
+
+- ti,davinci-mask-cle: mask for CLE. Needed for executing command
+ phase. These offset will be added to the base
+ address for the chip select space the NAND Flash
+ device is connected to.
+ If not set equal to 0x10.
+
+- ti,davinci-mask-chipsel: mask for chipselect address. Needed to mask
+ addresses for given chipselect.
+
+- nand-ecc-mode: operation mode of the NAND ecc mode. ECC mode
+ valid values for davinci driver:
+ - "none"
+ - "soft"
+ - "hw"
+
+- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4.
+
+- nand-bus-width: buswidth 8 or 16. If not present 8.
+
+- nand-on-flash-bbt: use flash based bad block table support. OOB
+ identifier is saved in OOB area. If not present
+ false.
+
+Deprecated properties:
+
+- ti,davinci-ecc-mode: operation mode of the NAND ecc mode. ECC mode
+ valid values for davinci driver:
+ - "none"
+ - "soft"
+ - "hw"
+
+- ti,davinci-nand-buswidth: buswidth 8 or 16. If not present 8.
+
+- ti,davinci-nand-use-bbt: use flash based bad block table support. OOB
+ identifier is saved in OOB area. If not present
+ false.
+
+Nand device bindings may contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail. The NAND Flash timing
+values must be programmed in the chip select’s node of AEMIF
+memory-controller (see Documentation/devicetree/bindings/memory-controllers/
+davinci-aemif.txt).
+
+Example(da850 EVM ):
+
+nand_cs3@62000000 {
+ compatible = "ti,davinci-nand";
+ reg = <0x62000000 0x807ff
+ 0x68000000 0x8000>;
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7e80000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index 551b2a1..458d596 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -17,6 +17,14 @@ Required properties:
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
present false
+ - fsl,use-minimum-ecc: Protect this NAND flash with the minimum ECC
+ strength required. The required ECC strength is
+ automatically discoverable for some flash
+ (e.g., according to the ONFI standard).
+ However, note that if this strength is not
+ discoverable or this property is not enabled,
+ the software may chooses an implementation-defined
+ ECC scheme.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index f1421e2..86e0a56 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -2,7 +2,9 @@ PXA3xx NAND DT bindings
Required properties:
- - compatible: Should be "marvell,pxa3xx-nand"
+ - compatible: Should be set to one of the following:
+ marvell,pxa3xx-nand
+ marvell,armada370-nand
- reg: The register base for the controller
- interrupts: The interrupt to map
- #address-cells: Set to <1> if the node includes partitions
@@ -13,6 +15,8 @@ Optional properties:
- marvell,nand-keep-config: Set to keep the NAND controller config as set
by the bootloader
- num-cs: Number of chipselect lines to usw
+ - nand-on-flash-bbt: boolean to enable on flash bbt option if
+ not present false
Example:
diff --git a/Documentation/mtd/nand/pxa3xx-nand.txt b/Documentation/mtd/nand/pxa3xx-nand.txt
new file mode 100644
index 0000000..840fd41
--- /dev/null
+++ b/Documentation/mtd/nand/pxa3xx-nand.txt
@@ -0,0 +1,113 @@
+
+About this document
+===================
+
+Some notes about Marvell's NAND controller available in PXA and Armada 370/XP
+SoC (aka NFCv1 and NFCv2), with an emphasis on the latter.
+
+NFCv2 controller background
+===========================
+
+The controller has a 2176 bytes FIFO buffer. Therefore, in order to support
+larger pages, I/O operations on 4 KiB and 8 KiB pages is done with a set of
+chunked transfers.
+
+For instance, if we choose a 2048 data chunk and set "BCH" ECC (see below)
+we'll have this layout in the pages:
+
+ ------------------------------------------------------------------------------
+ | 2048B data | 32B spare | 30B ECC || 2048B data | 32B spare | 30B ECC | ... |
+ ------------------------------------------------------------------------------
+
+The driver reads the data and spare portions independently and builds an internal
+buffer with this layout (in the 4 KiB page case):
+
+ ------------------------------------------
+ | 4096B data | 64B spare |
+ ------------------------------------------
+
+Also, for the READOOB command the driver disables the ECC and reads a 'spare + ECC'
+OOB, one per chunk read.
+
+ -------------------------------------------------------------------
+ | 4096B data | 32B spare | 30B ECC | 32B spare | 30B ECC |
+ -------------------------------------------------------------------
+
+So, in order to achieve reading (for instance), we issue several READ0 commands
+(with some additional controller-specific magic) and read two chunks of 2080B
+(2048 data + 32 spare) each.
+The driver accommodates this data to expose the NAND core a contiguous buffer
+(4096 data + spare) or (4096 + spare + ECC + spare + ECC).
+
+ECC
+===
+
+The controller has built-in hardware ECC capabilities. In addition it is
+configurable between two modes: 1) Hamming, 2) BCH.
+
+Note that the actual BCH mode: BCH-4 or BCH-8 will depend on the way
+the controller is configured to transfer the data.
+
+In the BCH mode the ECC code will be calculated for each transfered chunk
+and expected to be located (when reading/programming) right after the spare
+bytes as the figure above shows.
+
+So, repeating the above scheme, a 2048B data chunk will be followed by 32B
+spare, and then the ECC controller will read/write the ECC code (30B in
+this case):
+
+ ------------------------------------
+ | 2048B data | 32B spare | 30B ECC |
+ ------------------------------------
+
+If the ECC mode is 'BCH' then the ECC is *always* 30 bytes long.
+If the ECC mode is 'Hamming' the ECC is 6 bytes long, for each 512B block.
+So in Hamming mode, a 2048B page will have a 24B ECC.
+
+Despite all of the above, the controller requires the driver to only read or
+write in multiples of 8-bytes, because the data buffer is 64-bits.
+
+OOB
+===
+
+Because of the above scheme, and because the "spare" OOB is really located in
+the middle of a page, spare OOB cannot be read or write independently of the
+data area. In other words, in order to read the OOB (aka READOOB), the entire
+page (aka READ0) has to be read.
+
+In the same sense, in order to write to the spare OOB the driver has to write
+an *entire* page.
+
+Factory bad blocks handling
+===========================
+
+Given the ECC BCH requires to layout the device's pages in a split
+data/OOB/data/OOB way, the controller has a view of the flash page that's
+different from the specified (aka the manufacturer's) view. In other words,
+
+Factory view:
+
+ -----------------------------------------------
+ | Data |x OOB |
+ -----------------------------------------------
+
+Driver's view:
+
+ -----------------------------------------------
+ | Data | OOB | Data x | OOB |
+ -----------------------------------------------
+
+It can be seen from the above, that the factory bad block marker must be
+searched within the 'data' region, and not in the usual OOB region.
+
+In addition, this means under regular usage the driver will write such
+position (since it belongs to the data region) and every used block is
+likely to be marked as bad.
+
+For this reason, marking the block as bad in the OOB is explicitly
+disabled by using the NAND_BBT_NO_OOB_BBM option in the driver. The rationale
+for this is that there's no point in marking a block as bad, because good
+blocks are also 'marked as bad' (in the OOB BBM sense) under normal usage.
+
+Instead, the driver relies on the bad block table alone, and should only perform
+the bad block scan on the very first time (when the device hasn't been used).
diff --git a/MAINTAINERS b/MAINTAINERS
index 9bf651c..6d73831c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5622,10 +5622,11 @@ F: mm/page_cgroup.c
MEMORY TECHNOLOGY DEVICES (MTD)
M: David Woodhouse <dwmw2@infradead.org>
+M: Brian Norris <computersforpeace@gmail.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://git.infradead.org/mtd-2.6.git
+T: git git://git.infradead.org/linux-mtd.git
S: Maintained
F: drivers/mtd/
F: include/linux/mtd/
@@ -6942,6 +6943,12 @@ F: include/sound/pxa2xx-lib.h
F: sound/arm/pxa*
F: sound/soc/pxa/
+PXA3xx NAND FLASH DRIVER
+M: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+L: linux-mtd@lists.infradead.org
+S: Maintained
+F: drivers/mtd/nand/pxa3xx-nand.c
+
MMP SUPPORT
M: Eric Miao <eric.y.miao@gmail.com>
M: Haojian Zhuang <haojian.zhuang@gmail.com>
diff --git a/arch/arm/plat-samsung/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h
deleted file mode 100644
index 238efea..0000000
--- a/arch/arm/plat-samsung/include/plat/regs-nand.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 NAND register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND
-
-
-#define S3C2410_NFREG(x) (x)
-
-#define S3C2410_NFCONF S3C2410_NFREG(0x00)
-#define S3C2410_NFCMD S3C2410_NFREG(0x04)
-#define S3C2410_NFADDR S3C2410_NFREG(0x08)
-#define S3C2410_NFDATA S3C2410_NFREG(0x0C)
-#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
-#define S3C2410_NFECC S3C2410_NFREG(0x14)
-
-#define S3C2440_NFCONT S3C2410_NFREG(0x04)
-#define S3C2440_NFCMD S3C2410_NFREG(0x08)
-#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
-#define S3C2440_NFDATA S3C2410_NFREG(0x10)
-#define S3C2440_NFECCD0 S3C2410_NFREG(0x14)
-#define S3C2440_NFECCD1 S3C2410_NFREG(0x18)
-#define S3C2440_NFECCD S3C2410_NFREG(0x1C)
-#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
-#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
-#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
-#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
-#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC S3C2410_NFREG(0x34)
-#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
-#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
-
-#define S3C2412_NFSBLK S3C2410_NFREG(0x20)
-#define S3C2412_NFEBLK S3C2410_NFREG(0x24)
-#define S3C2412_NFSTAT S3C2410_NFREG(0x28)
-#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C)
-#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30)
-#define S3C2412_NFMECC0 S3C2410_NFREG(0x34)
-#define S3C2412_NFMECC1 S3C2410_NFREG(0x38)
-#define S3C2412_NFSECC S3C2410_NFREG(0x3C)
-
-#define S3C2410_NFCONF_EN (1<<15)
-#define S3C2410_NFCONF_512BYTE (1<<14)
-#define S3C2410_NFCONF_4STEP (1<<13)
-#define S3C2410_NFCONF_INITECC (1<<12)
-#define S3C2410_NFCONF_nFCE (1<<11)
-#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-
-#define S3C2410_NFSTAT_BUSY (1<<0)
-
-#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0)
-#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0)
-#define S3C2440_NFCONF_ADVFLASH (1<<3)
-#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
-#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
-#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
-
-#define S3C2440_NFCONT_LOCKTIGHT (1<<13)
-#define S3C2440_NFCONT_SOFTLOCK (1<<12)
-#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10)
-#define S3C2440_NFCONT_RNBINT_EN (1<<9)
-#define S3C2440_NFCONT_RN_FALLING (1<<8)
-#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6)
-#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5)
-#define S3C2440_NFCONT_INITECC (1<<4)
-#define S3C2440_NFCONT_nFCE (1<<1)
-#define S3C2440_NFCONT_ENABLE (1<<0)
-
-#define S3C2440_NFSTAT_READY (1<<0)
-#define S3C2440_NFSTAT_nCE (1<<1)
-#define S3C2440_NFSTAT_RnB_CHANGE (1<<2)
-#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3)
-
-#define S3C2412_NFCONF_NANDBOOT (1<<31)
-#define S3C2412_NFCONF_ECCCLKCON (1<<30)
-#define S3C2412_NFCONF_ECC_MLC (1<<24)
-#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */
-
-#define S3C2412_NFCONT_ECC4_DIRWR (1<<18)
-#define S3C2412_NFCONT_LOCKTIGHT (1<<17)
-#define S3C2412_NFCONT_SOFTLOCK (1<<16)
-#define S3C2412_NFCONT_ECC4_ENCINT (1<<13)
-#define S3C2412_NFCONT_ECC4_DECINT (1<<12)
-#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7)
-#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5)
-#define S3C2412_NFCONT_nFCE1 (1<<2)
-#define S3C2412_NFCONT_nFCE0 (1<<1)
-
-#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7)
-#define S3C2412_NFSTAT_ECC_DECDONE (1<<6)
-#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5)
-#define S3C2412_NFSTAT_RnB_CHANGE (1<<4)
-#define S3C2412_NFSTAT_nFCE1 (1<<3)
-#define S3C2412_NFSTAT_nFCE0 (1<<2)
-#define S3C2412_NFSTAT_Res1 (1<<1)
-#define S3C2412_NFSTAT_READY (1<<0)
-
-#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf)
-#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7)
-#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff)
-#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7)
-#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_NONE (0)
-#define S3C2412_NFECCERR_1BIT (1)
-#define S3C2412_NFECCERR_MULTIBIT (2)
-#define S3C2412_NFECCERR_ECCAREA (3)
-
-
-
-#endif /* __ASM_ARM_REGS_NAND */
-
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 5fab4e6e..5ebcda3 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -157,10 +157,11 @@ config MTD_BCM47XX_PARTS
comment "User Modules And Translation Layers"
+#
+# MTD block device support is select'ed if needed
+#
config MTD_BLKDEVS
- tristate "Common interface to block layer for MTD 'translation layers'"
- depends on BLOCK
- default n
+ tristate
config MTD_BLOCK
tristate "Caching block device access to MTD devices"
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 5a3942b..96a33e3f 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -264,7 +264,8 @@ static struct mtd_part_parser afs_parser = {
static int __init afs_parser_init(void)
{
- return register_mtd_parser(&afs_parser);
+ register_mtd_parser(&afs_parser);
+ return 0;
}
static void __exit afs_parser_exit(void)
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index ddc0a42..7c9172a 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -139,7 +139,8 @@ static struct mtd_part_parser ar7_parser = {
static int __init ar7_parser_init(void)
{
- return register_mtd_parser(&ar7_parser);
+ register_mtd_parser(&ar7_parser);
+ return 0;
}
static void __exit ar7_parser_exit(void)
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 7a6384b..de1eb92 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -23,10 +23,12 @@
* Amount of bytes we read when analyzing each block of flash memory.
* Set it big enough to allow detecting partition and reading important data.
*/
-#define BCM47XXPART_BYTES_TO_READ 0x404
+#define BCM47XXPART_BYTES_TO_READ 0x4e8
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define BOARD_DATA_MAGIC2 0xBD0D0BBD
+#define CFE_MAGIC 0x43464531 /* 1EFC */
#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
@@ -102,8 +104,9 @@ static int bcm47xxpart_parse(struct mtd_info *master,
continue;
}
- /* CFE has small NVRAM at 0x400 */
- if (buf[0x400 / 4] == NVRAM_HEADER) {
+ /* Magic or small NVRAM at 0x400 */
+ if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) ||
+ (buf[0x400 / 4] == NVRAM_HEADER)) {
bcm47xxpart_add_part(&parts[curr_part++], "boot",
offset, MTD_WRITEABLE);
continue;
@@ -190,6 +193,21 @@ static int bcm47xxpart_parse(struct mtd_info *master,
offset, 0);
continue;
}
+
+ /* Read middle of the block */
+ if (mtd_read(master, offset + 0x8000, 0x4,
+ &bytes_read, (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+ offset);
+ continue;
+ }
+
+ /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
+ if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
+ bcm47xxpart_add_part(&parts[curr_part++], "board_data",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
}
/* Look for NVRAM at the end of the last block. */
@@ -243,7 +261,8 @@ static struct mtd_part_parser bcm47xxpart_mtd_parser = {
static int __init bcm47xxpart_init(void)
{
- return register_mtd_parser(&bcm47xxpart_mtd_parser);
+ register_mtd_parser(&bcm47xxpart_mtd_parser);
+ return 0;
}
static void __exit bcm47xxpart_exit(void)
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 5c81390..b2443f7 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -221,7 +221,8 @@ static struct mtd_part_parser bcm63xx_cfe_parser = {
static int __init bcm63xx_cfe_parser_init(void)
{
- return register_mtd_parser(&bcm63xx_cfe_parser);
+ register_mtd_parser(&bcm63xx_cfe_parser);
+ return 0;
}
static void __exit bcm63xx_cfe_parser_exit(void)
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 721caeb..3e829b3 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -395,7 +395,8 @@ static int __init cmdline_parser_init(void)
{
if (mtdparts)
mtdpart_setup(mtdparts);
- return register_mtd_parser(&cmdline_parser);
+ register_mtd_parser(&cmdline_parser);
+ return 0;
}
static void __exit cmdline_parser_exit(void)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 4f091c1..dd5e101 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -2047,21 +2047,21 @@ static int __init docg3_probe(struct platform_device *pdev)
ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!ress) {
dev_err(dev, "No I/O memory resource defined\n");
- goto noress;
+ return ret;
}
- base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+ base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);
ret = -ENOMEM;
- cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS,
- GFP_KERNEL);
+ cascade = devm_kzalloc(dev, sizeof(*cascade) * DOC_MAX_NBFLOORS,
+ GFP_KERNEL);
if (!cascade)
- goto nomem1;
+ return ret;
cascade->base = base;
mutex_init(&cascade->lock);
cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
DOC_ECC_BCH_PRIMPOLY);
if (!cascade->bch)
- goto nomem2;
+ return ret;
for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
mtd = doc_probe_device(cascade, floor, dev);
@@ -2101,11 +2101,6 @@ err_probe:
for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
if (cascade->floors[floor])
doc_release_device(cascade->floors[floor]);
-nomem2:
- kfree(cascade);
-nomem1:
- iounmap(base);
-noress:
return ret;
}
@@ -2119,7 +2114,6 @@ static int __exit docg3_release(struct platform_device *pdev)
{
struct docg3_cascade *cascade = platform_get_drvdata(pdev);
struct docg3 *docg3 = cascade->floors[0]->priv;
- void __iomem *base = cascade->base;
int floor;
doc_unregister_sysfs(pdev, cascade);
@@ -2129,8 +2123,6 @@ static int __exit docg3_release(struct platform_device *pdev)
doc_release_device(cascade->floors[floor]);
free_bch(docg3->cascade->bch);
- kfree(cascade);
- iounmap(base);
return 0;
}
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 7eda71d..ad19139 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -41,6 +41,7 @@
#define OPCODE_WRSR 0x01 /* Write status register 1 byte */
#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
+#define OPCODE_QUAD_READ 0x6b /* Read data bytes */
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
@@ -48,10 +49,12 @@
#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
+#define OPCODE_RDCR 0x35 /* Read configuration register */
/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
+#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes */
#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */
#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */
@@ -76,6 +79,11 @@
#define SR_BP2 0x10 /* Block protect 2 */
#define SR_SRWD 0x80 /* SR write protect */
+#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
+
+/* Configuration Register bits. */
+#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */
+
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
#define MAX_CMD_SIZE 6
@@ -84,6 +92,12 @@
/****************************************************************************/
+enum read_type {
+ M25P80_NORMAL = 0,
+ M25P80_FAST,
+ M25P80_QUAD,
+};
+
struct m25p {
struct spi_device *spi;
struct mutex lock;
@@ -94,7 +108,7 @@ struct m25p {
u8 read_opcode;
u8 program_opcode;
u8 *command;
- bool fast_read;
+ enum read_type flash_read;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -131,6 +145,26 @@ static int read_sr(struct m25p *flash)
}
/*
+ * Read configuration register, returning its value in the
+ * location. Return the configuration register value.
+ * Returns negative if error occured.
+ */
+static int read_cr(struct m25p *flash)
+{
+ u8 code = OPCODE_RDCR;
+ int ret;
+ u8 val;
+
+ ret = spi_write_then_read(flash->spi, &code, 1, &val, 1);
+ if (ret < 0) {
+ dev_err(&flash->spi->dev, "error %d reading CR\n", ret);
+ return ret;
+ }
+
+ return val;
+}
+
+/*
* Write status register 1 byte
* Returns negative if error occurred.
*/
@@ -220,6 +254,93 @@ static int wait_till_ready(struct m25p *flash)
}
/*
+ * Write status Register and configuration register with 2 bytes
+ * The first byte will be written to the status register, while the
+ * second byte will be written to the configuration register.
+ * Return negative if error occured.
+ */
+static int write_sr_cr(struct m25p *flash, u16 val)
+{
+ flash->command[0] = OPCODE_WRSR;
+ flash->command[1] = val & 0xff;
+ flash->command[2] = (val >> 8);
+
+ return spi_write(flash->spi, flash->command, 3);
+}
+
+static int macronix_quad_enable(struct m25p *flash)
+{
+ int ret, val;
+ u8 cmd[2];
+ cmd[0] = OPCODE_WRSR;
+
+ val = read_sr(flash);
+ cmd[1] = val | SR_QUAD_EN_MX;
+ write_enable(flash);
+
+ spi_write(flash->spi, &cmd, 2);
+
+ if (wait_till_ready(flash))
+ return 1;
+
+ ret = read_sr(flash);
+ if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
+ dev_err(&flash->spi->dev, "Macronix Quad bit not set\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int spansion_quad_enable(struct m25p *flash)
+{
+ int ret;
+ int quad_en = CR_QUAD_EN_SPAN << 8;
+
+ write_enable(flash);
+
+ ret = write_sr_cr(flash, quad_en);
+ if (ret < 0) {
+ dev_err(&flash->spi->dev,
+ "error while writing configuration register\n");
+ return -EINVAL;
+ }
+
+ /* read back and check it */
+ ret = read_cr(flash);
+ if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
+ dev_err(&flash->spi->dev, "Spansion Quad bit not set\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int set_quad_mode(struct m25p *flash, u32 jedec_id)
+{
+ int status;
+
+ switch (JEDEC_MFR(jedec_id)) {
+ case CFI_MFR_MACRONIX:
+ status = macronix_quad_enable(flash);
+ if (status) {
+ dev_err(&flash->spi->dev,
+ "Macronix quad-read not enabled\n");
+ return -EINVAL;
+ }
+ return status;
+ default:
+ status = spansion_quad_enable(flash);
+ if (status) {
+ dev_err(&flash->spi->dev,
+ "Spansion quad-read not enabled\n");
+ return -EINVAL;
+ }
+ return status;
+ }
+}
+
+/*
* Erase the whole flash memory
*
* Returns 0 if successful, non-zero otherwise.
@@ -350,6 +471,35 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
}
/*
+ * Dummy Cycle calculation for different type of read.
+ * It can be used to support more commands with
+ * different dummy cycle requirements.
+ */
+static inline int m25p80_dummy_cycles_read(struct m25p *flash)
+{
+ switch (flash->flash_read) {
+ case M25P80_FAST:
+ case M25P80_QUAD:
+ return 1;
+ case M25P80_NORMAL:
+ return 0;
+ default:
+ dev_err(&flash->spi->dev, "No valid read type supported\n");
+ return -1;
+ }
+}
+
+static inline unsigned int m25p80_rx_nbits(const struct m25p *flash)
+{
+ switch (flash->flash_read) {
+ case M25P80_QUAD:
+ return 4;
+ default:
+ return 0;
+ }
+}
+
+/*
* Read an address range from the flash chip. The address range
* may be any size provided it is within the physical boundaries.
*/
@@ -360,6 +510,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
struct spi_transfer t[2];
struct spi_message m;
uint8_t opcode;
+ int dummy;
pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
__func__, (u32)from, len);
@@ -367,11 +518,18 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
spi_message_init(&m);
memset(t, 0, (sizeof t));
+ dummy = m25p80_dummy_cycles_read(flash);
+ if (dummy < 0) {
+ dev_err(&flash->spi->dev, "No valid read command supported\n");
+ return -EINVAL;
+ }
+
t[0].tx_buf = flash->command;
- t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
+ t[0].len = m25p_cmdsz(flash) + dummy;
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
+ t[1].rx_nbits = m25p80_rx_nbits(flash);
t[1].len = len;
spi_message_add_tail(&t[1], &m);
@@ -391,8 +549,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
spi_sync(flash->spi, &m);
- *retlen = m.actual_length - m25p_cmdsz(flash) -
- (flash->fast_read ? 1 : 0);
+ *retlen = m.actual_length - m25p_cmdsz(flash) - dummy;
mutex_unlock(&flash->lock);
@@ -698,6 +855,7 @@ struct flash_info {
#define SST_WRITE 0x04 /* use SST byte programming */
#define M25P_NO_FR 0x08 /* Can't do fastread */
#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */
+#define M25P80_QUAD_READ 0x20 /* Flash supports Quad Read */
};
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -775,7 +933,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, 0) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, M25P80_QUAD_READ) },
/* Micron */
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
@@ -795,8 +953,8 @@ static const struct spi_device_id m25p_ids[] = {
{ "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, 0) },
{ "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) },
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
- { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) },
- { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, 0) },
+ { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, M25P80_QUAD_READ) },
+ { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, M25P80_QUAD_READ) },
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
@@ -851,6 +1009,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
{ "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
+ { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
{ "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
{ "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
{ "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
@@ -937,6 +1096,7 @@ static int m25p_probe(struct spi_device *spi)
unsigned i;
struct mtd_part_parser_data ppdata;
struct device_node *np = spi->dev.of_node;
+ int ret;
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
@@ -1051,22 +1211,46 @@ static int m25p_probe(struct spi_device *spi)
flash->page_size = info->page_size;
flash->mtd.writebufsize = flash->page_size;
- if (np)
+ if (np) {
/* If we were instantiated by DT, use it */
- flash->fast_read = of_property_read_bool(np, "m25p,fast-read");
- else
+ if (of_property_read_bool(np, "m25p,fast-read"))
+ flash->flash_read = M25P80_FAST;
+ else
+ flash->flash_read = M25P80_NORMAL;
+ } else {
/* If we weren't instantiated by DT, default to fast-read */
- flash->fast_read = true;
+ flash->flash_read = M25P80_FAST;
+ }
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & M25P_NO_FR)
- flash->fast_read = false;
+ flash->flash_read = M25P80_NORMAL;
+
+ /* Quad-read mode takes precedence over fast/normal */
+ if (spi->mode & SPI_RX_QUAD && info->flags & M25P80_QUAD_READ) {
+ ret = set_quad_mode(flash, info->jedec_id);
+ if (ret) {
+ dev_err(&flash->spi->dev, "quad mode not supported\n");
+ return ret;
+ }
+ flash->flash_read = M25P80_QUAD;
+ }
/* Default commands */
- if (flash->fast_read)
+ switch (flash->flash_read) {
+ case M25P80_QUAD:
+ flash->read_opcode = OPCODE_QUAD_READ;
+ break;
+ case M25P80_FAST:
flash->read_opcode = OPCODE_FAST_READ;
- else
+ break;
+ case M25P80_NORMAL:
flash->read_opcode = OPCODE_NORM_READ;
+ break;
+ default:
+ dev_err(&flash->spi->dev, "No Read opcode defined\n");
+ return -EINVAL;
+ }
flash->program_opcode = OPCODE_PP;
@@ -1077,9 +1261,17 @@ static int m25p_probe(struct spi_device *spi)
flash->addr_width = 4;
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
/* Dedicated 4-byte command set */
- flash->read_opcode = flash->fast_read ?
- OPCODE_FAST_READ_4B :
- OPCODE_NORM_READ_4B;
+ switch (flash->flash_read) {
+ case M25P80_QUAD:
+ flash->read_opcode = OPCODE_QUAD_READ_4B;
+ break;
+ case M25P80_FAST:
+ flash->read_opcode = OPCODE_FAST_READ_4B;
+ break;
+ case M25P80_NORMAL:
+ flash->read_opcode = OPCODE_NORM_READ_4B;
+ break;
+ }
flash->program_opcode = OPCODE_PP_4B;
/* No small sector erase for 4-byte command set */
flash->erase_opcode = OPCODE_SE_4B;
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 182849d..5c8b322 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -205,7 +205,7 @@ static int __init ms02nv_init_one(ulong addr)
mtd->type = MTD_RAM;
mtd->flags = MTD_CAP_RAM;
mtd->size = fixsize;
- mtd->name = (char *)ms02nv_name;
+ mtd->name = ms02nv_name;
mtd->owner = THIS_MODULE;
mtd->_read = ms02nv_read;
mtd->_write = ms02nv_write;
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 4a47b02..624069d 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -669,7 +669,6 @@ static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
if (!err)
return 0;
- spi_set_drvdata(spi, NULL);
kfree(priv);
return err;
}
@@ -899,10 +898,8 @@ static int dataflash_remove(struct spi_device *spi)
pr_debug("%s: remove\n", dev_name(&spi->dev));
status = mtd_device_unregister(&flash->mtd);
- if (status == 0) {
- spi_set_drvdata(spi, NULL);
+ if (status == 0)
kfree(flash);
- }
return status;
}
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index ec59d65..8e28508 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -92,7 +92,7 @@ static void __exit cleanup_mtdram(void)
}
int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
- unsigned long size, char *name)
+ unsigned long size, const char *name)
{
memset(mtd, 0, sizeof(*mtd));
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 2ef19aa..d38b646 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -388,7 +388,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
wake_up(&chip->wq);
}
-int do_write_buffer(struct map_info *map, struct flchip *chip,
+static int do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const struct kvec **pvec,
unsigned long *pvec_seek, int len)
{
@@ -469,7 +469,7 @@ int do_write_buffer(struct map_info *map, struct flchip *chip,
return ret;
}
-int do_erase_oneblock(struct mtd_info *mtd, loff_t adr)
+static int do_erase_oneblock(struct mtd_info *mtd, loff_t adr)
{
struct map_info *map = mtd->priv;
struct lpddr_private *lpddr = map->fldrv_priv;
@@ -748,34 +748,6 @@ static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
return do_xxlock(mtd, ofs, len, DO_XXLOCK_UNLOCK);
}
-int word_program(struct map_info *map, loff_t adr, uint32_t curval)
-{
- int ret;
- struct lpddr_private *lpddr = map->fldrv_priv;
- int chipnum = adr >> lpddr->chipshift;
- struct flchip *chip = &lpddr->chips[chipnum];
-
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, FL_WRITING);
- if (ret) {
- mutex_unlock(&chip->mutex);
- return ret;
- }
-
- send_pfow_command(map, LPDDR_WORD_PROGRAM, adr, 0x00, (map_word *)&curval);
-
- ret = wait_for_ready(map, chip, (1<<lpddr->qinfo->SingleWordProgTime));
- if (ret) {
- printk(KERN_WARNING"%s word_program error at: %llx; val: %x\n",
- map->name, adr, curval);
- goto out;
- }
-
-out: put_chip(map, chip);
- mutex_unlock(&chip->mutex);
- return ret;
-}
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexey Korolev <akorolev@infradead.org>");
MODULE_DESCRIPTION("MTD driver for LPDDR flash chips");
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 10debfe..d6b2451 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -13,6 +13,7 @@
*
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -162,13 +163,6 @@ static int ixp4xx_flash_remove(struct platform_device *dev)
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
- if (info->map.virt)
- iounmap(info->map.virt);
-
- if (info->res) {
- release_resource(info->res);
- kfree(info->res);
- }
if (plat->exit)
plat->exit();
@@ -194,7 +188,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
return err;
}
- info = kzalloc(sizeof(struct ixp4xx_flash_info), GFP_KERNEL);
+ info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info),
+ GFP_KERNEL);
if(!info) {
err = -ENOMEM;
goto Error;
@@ -220,20 +215,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
info->map.write = ixp4xx_probe_write16;
info->map.copy_from = ixp4xx_copy_from;
- info->res = request_mem_region(dev->resource->start,
- resource_size(dev->resource),
- "IXP4XXFlash");
- if (!info->res) {
- printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
- err = -ENOMEM;
- goto Error;
- }
-
- info->map.virt = ioremap(dev->resource->start,
- resource_size(dev->resource));
- if (!info->map.virt) {
- printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
- err = -EIO;
+ info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource);
+ if (IS_ERR(info->map.virt)) {
+ err = PTR_ERR(info->map.virt);
goto Error;
}
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index d7ac65d..93c507a 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -123,24 +123,28 @@ ltq_mtd_probe(struct platform_device *pdev)
return -ENODEV;
}
- ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
+ ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
+ if (!ltq_mtd)
+ return -ENOMEM;
+
platform_set_drvdata(pdev, ltq_mtd);
ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!ltq_mtd->res) {
dev_err(&pdev->dev, "failed to get memory resource\n");
- err = -ENOENT;
- goto err_out;
+ return -ENOENT;
}
- ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+ ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
+ GFP_KERNEL);
+ if (!ltq_mtd->map)
+ return -ENOMEM;
+
ltq_mtd->map->phys = ltq_mtd->res->start;
ltq_mtd->map->size = resource_size(ltq_mtd->res);
ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
- if (IS_ERR(ltq_mtd->map->virt)) {
- err = PTR_ERR(ltq_mtd->map->virt);
- goto err_out;
- }
+ if (IS_ERR(ltq_mtd->map->virt))
+ return PTR_ERR(ltq_mtd->map->virt);
ltq_mtd->map->name = ltq_map_name;
ltq_mtd->map->bankwidth = 2;
@@ -155,8 +159,7 @@ ltq_mtd_probe(struct platform_device *pdev)
if (!ltq_mtd->mtd) {
dev_err(&pdev->dev, "probing failed\n");
- err = -ENXIO;
- goto err_free;
+ return -ENXIO;
}
ltq_mtd->mtd->owner = THIS_MODULE;
@@ -177,10 +180,6 @@ ltq_mtd_probe(struct platform_device *pdev)
err_destroy:
map_destroy(ltq_mtd->mtd);
-err_free:
- kfree(ltq_mtd->map);
-err_out:
- kfree(ltq_mtd);
return err;
}
@@ -189,13 +188,9 @@ ltq_mtd_remove(struct platform_device *pdev)
{
struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
- if (ltq_mtd) {
- if (ltq_mtd->mtd) {
- mtd_device_unregister(ltq_mtd->mtd);
- map_destroy(ltq_mtd->mtd);
- }
- kfree(ltq_mtd->map);
- kfree(ltq_mtd);
+ if (ltq_mtd && ltq_mtd->mtd) {
+ mtd_device_unregister(ltq_mtd->mtd);
+ map_destroy(ltq_mtd->mtd);
}
return 0;
}
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 0f55589..9aad854 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -61,7 +61,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
- info->map.name = (char *) flash->name;
+ info->map.name = flash->name;
info->map.bankwidth = flash->width;
info->map.phys = res->start;
info->map.size = resource_size(res);
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index d467f3b..39cc418 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -75,7 +75,7 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp)
up->name = of_get_property(dp, "model", NULL);
if (up->name && 0 < strlen(up->name))
- up->map.name = (char *)up->name;
+ up->map.name = up->name;
up->map.phys = op->resource[0].start;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 92311a5..34c0b16 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -313,15 +313,7 @@ static struct attribute *mtd_attrs[] = {
&dev_attr_bitflip_threshold.attr,
NULL,
};
-
-static struct attribute_group mtd_group = {
- .attrs = mtd_attrs,
-};
-
-static const struct attribute_group *mtd_groups[] = {
- &mtd_group,
- NULL,
-};
+ATTRIBUTE_GROUPS(mtd);
static struct device_type mtd_devtype = {
.name = "mtd",
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 6e732c3..3c7d6d7 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -534,7 +534,7 @@ out_register:
return slave;
}
-int mtd_add_partition(struct mtd_info *master, char *name,
+int mtd_add_partition(struct mtd_info *master, const char *name,
long long offset, long long length)
{
struct mtd_partition part;
@@ -672,22 +672,19 @@ static struct mtd_part_parser *get_partition_parser(const char *name)
#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
-int register_mtd_parser(struct mtd_part_parser *p)
+void register_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
list_add(&p->list, &part_parsers);
spin_unlock(&part_parser_lock);
-
- return 0;
}
EXPORT_SYMBOL_GPL(register_mtd_parser);
-int deregister_mtd_parser(struct mtd_part_parser *p)
+void deregister_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
list_del(&p->list);
spin_unlock(&part_parser_lock);
- return 0;
}
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 93ae6a6..90ff447 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
platforms.
config MTD_NAND_OMAP_BCH
- depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
+ depends on MTD_NAND_OMAP2
tristate "Support hardware based BCH error correction"
default n
select BCH
@@ -326,11 +326,11 @@ config MTD_NAND_ATMEL
on Atmel AT91 and AVR32 processors.
config MTD_NAND_PXA3xx
- tristate "Support for NAND flash devices on PXA3xx"
+ tristate "NAND support on PXA3xx and Armada 370/XP"
depends on PXA3xx || ARCH_MMP || PLAT_ORION
help
This enables the driver for the NAND flash device found on
- PXA3xx processors
+ PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
config MTD_NAND_SLC_LPC32XX
tristate "NXP LPC32xx SLC Controller"
@@ -458,17 +458,17 @@ config MTD_NAND_MXC
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
- depends on SUPERH || ARCH_SHMOBILE
+ depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
- tristate "Support NAND on DaVinci SoC"
- depends on ARCH_DAVINCI
+ tristate "Support NAND on DaVinci/Keystone SoC"
+ depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
help
Enable the driver for NAND flash chips on Texas Instruments
- DaVinci processors.
+ DaVinci/Keystone processors.
config MTD_NAND_TXX9NDFMC
tristate "NAND Flash support for TXx9 SoC"
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 59f08c4..c36e9b8 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1961,10 +1961,8 @@ static int atmel_nand_probe(struct platform_device *pdev)
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
- if (!host) {
- printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
+ if (!host)
return -ENOMEM;
- }
res = platform_driver_register(&atmel_nand_nfc_driver);
if (res)
@@ -2062,14 +2060,14 @@ static int atmel_nand_probe(struct platform_device *pdev)
}
if (gpio_get_value(host->board.det_pin)) {
- printk(KERN_INFO "No SmartMedia card inserted.\n");
+ dev_info(&pdev->dev, "No SmartMedia card inserted.\n");
res = -ENXIO;
goto err_no_card;
}
}
if (host->board.on_flash_bbt || on_flash_bbt) {
- printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
+ dev_info(&pdev->dev, "Use On Flash BBT\n");
nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index ae8dd7c..2880d88 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -418,10 +418,8 @@ static int au1550nd_probe(struct platform_device *pdev)
}
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
- if (!ctx) {
- dev_err(&pdev->dev, "no memory for NAND context\n");
+ if (!ctx)
return -ENOMEM;
- }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
@@ -480,6 +478,8 @@ static int au1550nd_probe(struct platform_device *pdev)
mtd_device_register(&ctx->info, pd->parts, pd->num_parts);
+ platform_set_drvdata(pdev, ctx);
+
return 0;
out3:
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 2c42e12..94f55db 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -745,7 +745,6 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
- dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
goto out_err_kzalloc;
}
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index c34985a5..f2f64ad 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -640,10 +640,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
pci_set_master(pdev);
mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
- if (!mtd) {
- dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
+ if (!mtd)
return -ENOMEM;
- }
cafe = (void *)(&mtd[1]);
mtd->dev.parent = &pdev->dev;
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 39b2ef8..66ec95e 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -164,7 +164,6 @@ static int __init cmx270_init(void)
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
- pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
ret = -ENOMEM;
goto err_kzalloc;
}
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index d469a9a..88109d3 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -199,7 +199,6 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
/* Allocate memory for MTD device structure and private data */
new_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!new_mtd) {
- printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index b77a01e..a4989ec 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of.h>
+#include <linux/of_mtd.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
@@ -487,7 +488,7 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
*/
-static struct nand_ecclayout hwecc4_small __initconst = {
+static struct nand_ecclayout hwecc4_small = {
.eccbytes = 10,
.eccpos = { 0, 1, 2, 3, 4,
/* offset 5 holds the badblock marker */
@@ -503,7 +504,7 @@ static struct nand_ecclayout hwecc4_small __initconst = {
* storing ten ECC bytes plus the manufacturer's bad block marker byte,
* and not overlapping the default BBT markers.
*/
-static struct nand_ecclayout hwecc4_2048 __initconst = {
+static struct nand_ecclayout hwecc4_2048 = {
.eccbytes = 40,
.eccpos = {
/* at the end of spare sector */
@@ -534,17 +535,19 @@ static struct davinci_nand_pdata
struct davinci_nand_pdata *pdata;
const char *mode;
u32 prop;
- int len;
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct davinci_nand_pdata),
GFP_KERNEL);
pdev->dev.platform_data = pdata;
if (!pdata)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-chipselect", &prop))
pdev->id = prop;
+ else
+ return ERR_PTR(-EINVAL);
+
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-mask-ale", &prop))
pdata->mask_ale = prop;
@@ -555,6 +558,8 @@ static struct davinci_nand_pdata
"ti,davinci-mask-chipsel", &prop))
pdata->mask_chipsel = prop;
if (!of_property_read_string(pdev->dev.of_node,
+ "nand-ecc-mode", &mode) ||
+ !of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
pdata->ecc_mode = NAND_ECC_NONE;
@@ -566,12 +571,16 @@ static struct davinci_nand_pdata
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
pdata->ecc_bits = prop;
- if (!of_property_read_u32(pdev->dev.of_node,
+
+ prop = of_get_nand_bus_width(pdev->dev.of_node);
+ if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
"ti,davinci-nand-buswidth", &prop))
if (prop == 16)
pdata->options |= NAND_BUSWIDTH_16;
- if (of_find_property(pdev->dev.of_node,
- "ti,davinci-nand-use-bbt", &len))
+ if (of_property_read_bool(pdev->dev.of_node,
+ "nand-on-flash-bbt") ||
+ of_property_read_bool(pdev->dev.of_node,
+ "ti,davinci-nand-use-bbt"))
pdata->bbt_options = NAND_BBT_USE_FLASH;
}
@@ -585,7 +594,7 @@ static struct davinci_nand_pdata
}
#endif
-static int __init nand_davinci_probe(struct platform_device *pdev)
+static int nand_davinci_probe(struct platform_device *pdev)
{
struct davinci_nand_pdata *pdata;
struct davinci_nand_info *info;
@@ -598,6 +607,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
nand_ecc_modes_t ecc_mode;
pdata = nand_davinci_get_pdata(pdev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+
/* insist on board-specific configuration */
if (!pdata)
return -ENODEV;
@@ -607,11 +619,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
return -ENODEV;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(&pdev->dev, "unable to allocate memory\n");
- ret = -ENOMEM;
- goto err_nomem;
- }
+ if (!info)
+ return -ENOMEM;
platform_set_drvdata(pdev, info);
@@ -619,19 +628,23 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res1 || !res2) {
dev_err(&pdev->dev, "resource missing\n");
- ret = -EINVAL;
- goto err_nomem;
+ return -EINVAL;
}
vaddr = devm_ioremap_resource(&pdev->dev, res1);
- if (IS_ERR(vaddr)) {
- ret = PTR_ERR(vaddr);
- goto err_ioremap;
- }
- base = devm_ioremap_resource(&pdev->dev, res2);
- if (IS_ERR(base)) {
- ret = PTR_ERR(base);
- goto err_ioremap;
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+
+ /*
+ * This registers range is used to setup NAND settings. In case with
+ * TI AEMIF driver, the same memory address range is requested already
+ * by AEMIF, so we cannot request it twice, just ioremap.
+ * The AEMIF and NAND drivers not use the same registers in this range.
+ */
+ base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2));
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2);
+ return -EADDRNOTAVAIL;
}
info->dev = &pdev->dev;
@@ -699,7 +712,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
spin_unlock_irq(&davinci_nand_lock);
if (ret == -EBUSY)
- goto err_ecc;
+ return ret;
info->chip.ecc.calculate = nand_davinci_calculate_4bit;
info->chip.ecc.correct = nand_davinci_correct_4bit;
@@ -715,8 +728,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->chip.ecc.strength = pdata->ecc_bits;
break;
default:
- ret = -EINVAL;
- goto err_ecc;
+ return -EINVAL;
}
info->chip.ecc.mode = ecc_mode;
@@ -724,7 +736,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- goto err_clk;
+ return ret;
}
ret = clk_prepare_enable(info->clk);
@@ -753,7 +765,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->core_chipsel);
if (ret < 0) {
dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err_timing;
+ goto err;
}
spin_lock_irq(&davinci_nand_lock);
@@ -769,7 +781,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err_scan;
+ goto err;
}
/* Update ECC layout if needed ... for 1-bit HW ECC, the default
@@ -783,7 +795,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (!chunks || info->mtd.oobsize < 16) {
dev_dbg(&pdev->dev, "too small\n");
ret = -EINVAL;
- goto err_scan;
+ goto err;
}
/* For small page chips, preserve the manufacturer's
@@ -814,7 +826,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
"for 4KiB-page NAND\n");
ret = -EIO;
- goto err_scan;
+ goto err;
syndrome_done:
info->chip.ecc.layout = &info->ecclayout;
@@ -822,7 +834,7 @@ syndrome_done:
ret = nand_scan_tail(&info->mtd);
if (ret < 0)
- goto err_scan;
+ goto err;
if (pdata->parts)
ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
@@ -835,7 +847,7 @@ syndrome_done:
NULL, 0);
}
if (ret < 0)
- goto err_scan;
+ goto err;
val = davinci_nand_readl(info, NRCSR_OFFSET);
dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -843,8 +855,7 @@ syndrome_done:
return 0;
-err_scan:
-err_timing:
+err:
clk_disable_unprepare(info->clk);
err_clk_enable:
@@ -852,15 +863,10 @@ err_clk_enable:
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-err_nomem:
return ret;
}
-static int __exit nand_davinci_remove(struct platform_device *pdev)
+static int nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
@@ -877,7 +883,8 @@ static int __exit nand_davinci_remove(struct platform_device *pdev)
}
static struct platform_driver nand_davinci_driver = {
- .remove = __exit_p(nand_davinci_remove),
+ .probe = nand_davinci_probe,
+ .remove = nand_davinci_remove,
.driver = {
.name = "davinci_nand",
.owner = THIS_MODULE,
@@ -886,7 +893,7 @@ static struct platform_driver nand_davinci_driver = {
};
MODULE_ALIAS("platform:davinci_nand");
-module_platform_driver_probe(nand_davinci_driver, nand_davinci_probe);
+module_platform_driver(nand_davinci_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 370b9dd..c07cd57 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -125,7 +125,6 @@ static void reset_buf(struct denali_nand_info *denali)
static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
{
- BUG_ON(denali->buf.tail >= sizeof(denali->buf.buf));
denali->buf.buf[denali->buf.tail++] = byte;
}
@@ -897,7 +896,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
/* this function examines buffers to see if they contain data that
* indicate that the buffer is part of an erased region of flash.
*/
-bool is_erased(uint8_t *buf, int len)
+static bool is_erased(uint8_t *buf, int len)
{
int i = 0;
for (i = 0; i < len; i++)
@@ -1429,20 +1428,12 @@ int denali_init(struct denali_nand_info *denali)
}
}
- /* Is 32-bit DMA supported? */
- ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
- if (ret) {
- pr_err("Spectra: no usable DMA configuration\n");
- return ret;
- }
- denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
- DENALI_BUF_SIZE,
- DMA_BIDIRECTIONAL);
+ /* allocate a temporary buffer for nand_scan_ident() */
+ denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE,
+ GFP_DMA | GFP_KERNEL);
+ if (!denali->buf.buf)
+ return -ENOMEM;
- if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
- dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
- return -EIO;
- }
denali->mtd.dev.parent = denali->dev;
denali_hw_init(denali);
denali_drv_init(denali);
@@ -1475,12 +1466,29 @@ int denali_init(struct denali_nand_info *denali)
goto failed_req_irq;
}
- /* MTD supported page sizes vary by kernel. We validate our
- * kernel supports the device here.
- */
- if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
- ret = -ENODEV;
- pr_err("Spectra: device size not supported by this version of MTD.");
+ /* allocate the right size buffer now */
+ devm_kfree(denali->dev, denali->buf.buf);
+ denali->buf.buf = devm_kzalloc(denali->dev,
+ denali->mtd.writesize + denali->mtd.oobsize,
+ GFP_KERNEL);
+ if (!denali->buf.buf) {
+ ret = -ENOMEM;
+ goto failed_req_irq;
+ }
+
+ /* Is 32-bit DMA supported? */
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ pr_err("Spectra: no usable DMA configuration\n");
+ goto failed_req_irq;
+ }
+
+ denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
+ denali->mtd.writesize + denali->mtd.oobsize,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+ dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+ ret = -EIO;
goto failed_req_irq;
}
@@ -1602,7 +1610,8 @@ EXPORT_SYMBOL(denali_init);
void denali_remove(struct denali_nand_info *denali)
{
denali_irq_cleanup(denali->irq, denali);
- dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ dma_unmap_single(denali->dev, denali->buf.dma_buf,
+ denali->mtd.writesize + denali->mtd.oobsize,
DMA_BIDIRECTIONAL);
}
EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index cec5712..9668174 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -455,12 +455,10 @@
#define ECC_SECTOR_SIZE 512
-#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-
struct nand_buf {
int head;
int tail;
- uint8_t buf[DENALI_BUF_SIZE];
+ uint8_t *buf;
dma_addr_t dma_buf;
};
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index 9253024..babb02c 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -108,7 +108,7 @@ static int denali_dt_probe(struct platform_device *ofdev)
denali->dev->dma_mask = NULL;
}
- dt->clk = clk_get(&ofdev->dev, NULL);
+ dt->clk = devm_clk_get(&ofdev->dev, NULL);
if (IS_ERR(dt->clk)) {
dev_err(&ofdev->dev, "no clk available\n");
return PTR_ERR(dt->clk);
@@ -124,7 +124,6 @@ static int denali_dt_probe(struct platform_device *ofdev)
out_disable_clk:
clk_disable_unprepare(dt->clk);
- clk_put(dt->clk);
return ret;
}
@@ -135,7 +134,6 @@ static int denali_dt_remove(struct platform_device *ofdev)
denali_remove(&dt->denali);
clk_disable(dt->clk);
- clk_put(dt->clk);
return 0;
}
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index 033f177..6e2f387 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -21,7 +21,7 @@
#define DENALI_NAND_NAME "denali-nand-pci"
/* List of platforms this NAND controller has be integrated into */
-static DEFINE_PCI_DEVICE_TABLE(denali_pci_ids) = {
+static const struct pci_device_id denali_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
{ /* end: all zeroes */ }
@@ -131,7 +131,6 @@ static struct pci_driver denali_pci_driver = {
static int denali_init_pci(void)
{
- pr_info("Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
return pci_register_driver(&denali_pci_driver);
}
module_init(denali_init_pci);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index b68a495..fec31d7 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1058,7 +1058,6 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1)))
@@ -1166,7 +1165,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
@@ -1440,10 +1438,13 @@ static int __init doc_probe(unsigned long physadr)
int reg, len, numchips;
int ret = 0;
+ if (!request_mem_region(physadr, DOC_IOREMAP_LEN, NULL))
+ return -EBUSY;
virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
if (!virtadr) {
printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr);
- return -EIO;
+ ret = -EIO;
+ goto error_ioremap;
}
/* It's not possible to cleanly detect the DiskOnChip - the
@@ -1561,7 +1562,6 @@ static int __init doc_probe(unsigned long physadr)
sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
mtd = kzalloc(len, GFP_KERNEL);
if (!mtd) {
- printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
ret = -ENOMEM;
goto fail;
}
@@ -1629,6 +1629,10 @@ static int __init doc_probe(unsigned long physadr)
WriteDOC(save_control, virtadr, DOCControl);
fail:
iounmap(virtadr);
+
+error_ioremap:
+ release_mem_region(physadr, DOC_IOREMAP_LEN);
+
return ret;
}
@@ -1645,6 +1649,7 @@ static void release_nanddoc(void)
nextmtd = doc->nextdoc;
nand_release(mtd);
iounmap(doc->virtadr);
+ release_mem_region(doc->physadr, DOC_IOREMAP_LEN);
kfree(mtd);
}
}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index c966fc7..bcf6080 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -847,7 +847,6 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
if (!fsl_lbc_ctrl_dev->nand) {
elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL);
if (!elbc_fcm_ctrl) {
- dev_err(dev, "failed to allocate memory\n");
mutex_unlock(&fsl_elbc_nand_mutex);
ret = -ENOMEM;
goto err;
@@ -875,7 +874,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
goto err;
}
- priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
if (!priv->mtd.name) {
ret = -ENOMEM;
goto err;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 4335577..90ca7e7 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -1060,7 +1060,6 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
if (!fsl_ifc_ctrl_dev->nand) {
ifc_nand_ctrl = kzalloc(sizeof(*ifc_nand_ctrl), GFP_KERNEL);
if (!ifc_nand_ctrl) {
- dev_err(&dev->dev, "failed to allocate memory\n");
mutex_unlock(&fsl_ifc_nand_mutex);
return -ENOMEM;
}
@@ -1101,7 +1100,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
IFC_NAND_EVTER_INTR_FTOERIR_EN |
IFC_NAND_EVTER_INTR_WPERIR_EN,
&ifc->ifc_nand.nand_evter_intr_en);
- priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
if (!priv->mtd.name) {
ret = -ENOMEM;
goto err;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 8b27522..1550692 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -889,10 +889,8 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
pdata->nand_timings = devm_kzalloc(&pdev->dev,
sizeof(*pdata->nand_timings), GFP_KERNEL);
- if (!pdata->nand_timings) {
- dev_err(&pdev->dev, "no memory for nand_timing\n");
+ if (!pdata->nand_timings)
return -ENOMEM;
- }
of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
sizeof(*pdata->nand_timings));
@@ -950,10 +948,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
- if (!host) {
- dev_err(&pdev->dev, "failed to allocate device structure\n");
+ if (!host)
return -ENOMEM;
- }
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
host->data_va = devm_ioremap_resource(&pdev->dev, res);
@@ -1108,8 +1104,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
host->ecc_place = &fsmc_ecc4_lp_place;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
} else {
@@ -1124,8 +1120,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
nand->ecc.layout = &fsmc_ecc1_128_layout;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
}
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index e826f89..8e6148a 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -132,13 +132,17 @@ static int gpio_nand_get_config_of(const struct device *dev,
static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
{
- struct resource *r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+ struct resource *r;
u64 addr;
- if (!r || of_property_read_u64(pdev->dev.of_node,
+ if (of_property_read_u64(pdev->dev.of_node,
"gpio-control-nand,io-sync-reg", &addr))
return NULL;
+ r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return NULL;
+
r->start = addr;
r->end = r->start + 0x3;
r->flags = IORESOURCE_MEM;
@@ -211,10 +215,8 @@ static int gpio_nand_probe(struct platform_device *pdev)
return -EINVAL;
gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
- if (!gpiomtd) {
- dev_err(&pdev->dev, "failed to create NAND MTD\n");
+ if (!gpiomtd)
return -ENOMEM;
- }
chip = &gpiomtd->nand_chip;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index aaced29..dd1df60 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -20,6 +20,7 @@
*/
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include "gpmi-nand.h"
#include "gpmi-regs.h"
@@ -207,30 +208,41 @@ void gpmi_dump_info(struct gpmi_nand_data *this)
u32 reg;
int i;
- pr_err("Show GPMI registers :\n");
+ dev_err(this->dev, "Show GPMI registers :\n");
for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
reg = readl(r->gpmi_regs + i * 0x10);
- pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
}
/* start to print out the BCH info */
- pr_err("Show BCH registers :\n");
+ dev_err(this->dev, "Show BCH registers :\n");
for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
reg = readl(r->bch_regs + i * 0x10);
- pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
}
- pr_err("BCH Geometry :\n");
- pr_err("GF length : %u\n", geo->gf_len);
- pr_err("ECC Strength : %u\n", geo->ecc_strength);
- pr_err("Page Size in Bytes : %u\n", geo->page_size);
- pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
- pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
- pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count);
- pr_err("Payload Size in Bytes : %u\n", geo->payload_size);
- pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
- pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
- pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
- pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset);
+ dev_err(this->dev, "BCH Geometry :\n"
+ "GF length : %u\n"
+ "ECC Strength : %u\n"
+ "Page Size in Bytes : %u\n"
+ "Metadata Size in Bytes : %u\n"
+ "ECC Chunk Size in Bytes: %u\n"
+ "ECC Chunk Count : %u\n"
+ "Payload Size in Bytes : %u\n"
+ "Auxiliary Size in Bytes: %u\n"
+ "Auxiliary Status Offset: %u\n"
+ "Block Mark Byte Offset : %u\n"
+ "Block Mark Bit Offset : %u\n",
+ geo->gf_len,
+ geo->ecc_strength,
+ geo->page_size,
+ geo->metadata_size,
+ geo->ecc_chunk_size,
+ geo->ecc_chunk_count,
+ geo->payload_size,
+ geo->auxiliary_size,
+ geo->auxiliary_status_offset,
+ geo->block_mark_byte_offset,
+ geo->block_mark_bit_offset);
}
/* Configures the geometry for BCH. */
@@ -265,8 +277,8 @@ int bch_set_geometry(struct gpmi_nand_data *this)
* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
* On the other hand, the MX28 needs the reset, because one case has been
* seen where the BCH produced ECC errors constantly after 10000
- * consecutive reboots. The latter case has not been seen on the MX23 yet,
- * still we don't know if it could happen there as well.
+ * consecutive reboots. The latter case has not been seen on the MX23
+ * yet, still we don't know if it could happen there as well.
*/
ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
if (ret)
@@ -353,7 +365,7 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
improved_timing_is_available =
(target.tREA_in_ns >= 0) &&
(target.tRLOH_in_ns >= 0) &&
- (target.tRHOH_in_ns >= 0) ;
+ (target.tRHOH_in_ns >= 0);
/* Inspect the clock. */
nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]);
@@ -911,10 +923,14 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
struct resources *r = &this->resources;
struct nand_chip *nand = &this->nand;
struct mtd_info *mtd = &this->mtd;
- uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
+ uint8_t *feature;
unsigned long rate;
int ret;
+ feature = kzalloc(ONFI_SUBFEATURE_PARAM_LEN, GFP_KERNEL);
+ if (!feature)
+ return -ENOMEM;
+
nand->select_chip(mtd, 0);
/* [1] send SET FEATURE commond to NAND */
@@ -942,11 +958,13 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
this->flags |= GPMI_ASYNC_EDO_ENABLED;
this->timing_mode = mode;
+ kfree(feature);
dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode);
return 0;
err_out:
nand->select_chip(mtd, -1);
+ kfree(feature);
dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode);
return -EINVAL;
}
@@ -986,7 +1004,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
/* Enable the clock. */
ret = gpmi_enable_clk(this);
if (ret) {
- pr_err("We failed in enable the clk\n");
+ dev_err(this->dev, "We failed in enable the clk\n");
goto err_out;
}
@@ -1003,7 +1021,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
/* [1] Set HW_GPMI_TIMING0 */
reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
- BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ;
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles);
writel(reg, gpmi_regs + HW_GPMI_TIMING0);
@@ -1090,7 +1108,7 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
reg = readl(r->gpmi_regs + HW_GPMI_STAT);
} else
- pr_err("unknow arch.\n");
+ dev_err(this->dev, "unknow arch.\n");
return reg & mask;
}
@@ -1121,10 +1139,8 @@ int gpmi_send_command(struct gpmi_nand_data *this)
desc = dmaengine_prep_slave_sg(channel,
(struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
- if (!desc) {
- pr_err("step 1 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
sgl = &this->cmd_sgl;
@@ -1134,11 +1150,8 @@ int gpmi_send_command(struct gpmi_nand_data *this)
desc = dmaengine_prep_slave_sg(channel,
sgl, 1, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-
- if (!desc) {
- pr_err("step 2 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [3] submit the DMA */
set_dma_type(this, DMA_FOR_COMMAND);
@@ -1167,20 +1180,17 @@ int gpmi_send_data(struct gpmi_nand_data *this)
pio[1] = 0;
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
- if (!desc) {
- pr_err("step 1 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [2] send DMA request */
prepare_data_dma(this, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
1, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- pr_err("step 2 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
+
/* [3] submit the DMA */
set_dma_type(this, DMA_FOR_WRITE_DATA);
return start_dma_without_bch_irq(this, desc);
@@ -1204,20 +1214,16 @@ int gpmi_read_data(struct gpmi_nand_data *this)
desc = dmaengine_prep_slave_sg(channel,
(struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
- if (!desc) {
- pr_err("step 1 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [2] : send DMA request */
prepare_data_dma(this, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
1, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- pr_err("step 2 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [3] : submit the DMA */
set_dma_type(this, DMA_FOR_READ_DATA);
@@ -1262,10 +1268,9 @@ int gpmi_send_page(struct gpmi_nand_data *this,
(struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE,
DMA_CTRL_ACK);
- if (!desc) {
- pr_err("step 2 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
+
set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
return start_dma_with_bch_irq(this, desc);
}
@@ -1297,10 +1302,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
desc = dmaengine_prep_slave_sg(channel,
(struct scatterlist *)pio, 2,
DMA_TRANS_NONE, 0);
- if (!desc) {
- pr_err("step 1 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [2] Enable the BCH block and read. */
command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
@@ -1327,10 +1330,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
(struct scatterlist *)pio,
ARRAY_SIZE(pio), DMA_TRANS_NONE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- pr_err("step 2 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [3] Disable the BCH block */
command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
@@ -1348,10 +1349,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
(struct scatterlist *)pio, 3,
DMA_TRANS_NONE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- pr_err("step 3 error\n");
- return -1;
- }
+ if (!desc)
+ return -EINVAL;
/* [4] submit the DMA */
set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index dabbc14..ca6369f 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -18,9 +18,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -352,6 +349,9 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")
+ && set_geometry_by_ecc_info(this))
+ return 0;
return legacy_set_geometry(this);
}
@@ -367,25 +367,28 @@ void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
struct scatterlist *sgl = &this->data_sgl;
int ret;
- this->direct_dma_map_ok = true;
-
/* first try to map the upper buffer directly */
- sg_init_one(sgl, this->upper_buf, this->upper_len);
- ret = dma_map_sg(this->dev, sgl, 1, dr);
- if (ret == 0) {
- /* We have to use our own DMA buffer. */
- sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
-
- if (dr == DMA_TO_DEVICE)
- memcpy(this->data_buffer_dma, this->upper_buf,
- this->upper_len);
-
+ if (virt_addr_valid(this->upper_buf) &&
+ !object_is_on_stack(this->upper_buf)) {
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
ret = dma_map_sg(this->dev, sgl, 1, dr);
if (ret == 0)
- pr_err("DMA mapping failed.\n");
+ goto map_fail;
- this->direct_dma_map_ok = false;
+ this->direct_dma_map_ok = true;
+ return;
}
+
+map_fail:
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, this->upper_len);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len);
+
+ dma_map_sg(this->dev, sgl, 1, dr);
+
+ this->direct_dma_map_ok = false;
}
/* This will be called after the DMA operation is finished. */
@@ -416,7 +419,7 @@ static void dma_irq_callback(void *param)
break;
default:
- pr_err("in wrong DMA operation.\n");
+ dev_err(this->dev, "in wrong DMA operation.\n");
}
complete(dma_c);
@@ -438,7 +441,8 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
/* Wait for the interrupt from the DMA block. */
err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
if (!err) {
- pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+ dev_err(this->dev, "DMA timeout, last DMA :%d\n",
+ this->last_dma_type);
gpmi_dump_info(this);
return -ETIMEDOUT;
}
@@ -467,7 +471,8 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
/* Wait for the interrupt from the BCH block. */
err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
if (!err) {
- pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+ dev_err(this->dev, "BCH timeout, last DMA :%d\n",
+ this->last_dma_type);
gpmi_dump_info(this);
return -ETIMEDOUT;
}
@@ -483,70 +488,38 @@ static int acquire_register_block(struct gpmi_nand_data *this,
void __iomem *p;
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
- if (!r) {
- pr_err("Can't get resource for %s\n", res_name);
- return -ENODEV;
- }
-
- p = ioremap(r->start, resource_size(r));
- if (!p) {
- pr_err("Can't remap %s\n", res_name);
- return -ENOMEM;
- }
+ p = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(p))
+ return PTR_ERR(p);
if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
res->gpmi_regs = p;
else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
res->bch_regs = p;
else
- pr_err("unknown resource name : %s\n", res_name);
+ dev_err(this->dev, "unknown resource name : %s\n", res_name);
return 0;
}
-static void release_register_block(struct gpmi_nand_data *this)
-{
- struct resources *res = &this->resources;
- if (res->gpmi_regs)
- iounmap(res->gpmi_regs);
- if (res->bch_regs)
- iounmap(res->bch_regs);
- res->gpmi_regs = NULL;
- res->bch_regs = NULL;
-}
-
static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
{
struct platform_device *pdev = this->pdev;
- struct resources *res = &this->resources;
const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
struct resource *r;
int err;
r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
if (!r) {
- pr_err("Can't get resource for %s\n", res_name);
+ dev_err(this->dev, "Can't get resource for %s\n", res_name);
return -ENODEV;
}
- err = request_irq(r->start, irq_h, 0, res_name, this);
- if (err) {
- pr_err("Can't own %s\n", res_name);
- return err;
- }
-
- res->bch_low_interrupt = r->start;
- res->bch_high_interrupt = r->end;
- return 0;
-}
-
-static void release_bch_irq(struct gpmi_nand_data *this)
-{
- struct resources *res = &this->resources;
- int i = res->bch_low_interrupt;
+ err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this);
+ if (err)
+ dev_err(this->dev, "error requesting BCH IRQ\n");
- for (; i <= res->bch_high_interrupt; i++)
- free_irq(i, this);
+ return err;
}
static void release_dma_channels(struct gpmi_nand_data *this)
@@ -567,7 +540,7 @@ static int acquire_dma_channels(struct gpmi_nand_data *this)
/* request dma channel */
dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!dma_chan) {
- pr_err("Failed to request DMA channel.\n");
+ dev_err(this->dev, "Failed to request DMA channel.\n");
goto acquire_err;
}
@@ -579,21 +552,6 @@ acquire_err:
return -EINVAL;
}
-static void gpmi_put_clks(struct gpmi_nand_data *this)
-{
- struct resources *r = &this->resources;
- struct clk *clk;
- int i;
-
- for (i = 0; i < GPMI_CLK_MAX; i++) {
- clk = r->clock[i];
- if (clk) {
- clk_put(clk);
- r->clock[i] = NULL;
- }
- }
-}
-
static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
@@ -606,7 +564,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
int err, i;
/* The main clock is stored in the first. */
- r->clock[0] = clk_get(this->dev, "gpmi_io");
+ r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
if (IS_ERR(r->clock[0])) {
err = PTR_ERR(r->clock[0]);
goto err_clock;
@@ -622,7 +580,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
if (extra_clks[i - 1] == NULL)
break;
- clk = clk_get(this->dev, extra_clks[i - 1]);
+ clk = devm_clk_get(this->dev, extra_clks[i - 1]);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
goto err_clock;
@@ -644,7 +602,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
err_clock:
dev_dbg(this->dev, "failed in finding the clocks.\n");
- gpmi_put_clks(this);
return err;
}
@@ -666,7 +623,7 @@ static int acquire_resources(struct gpmi_nand_data *this)
ret = acquire_dma_channels(this);
if (ret)
- goto exit_dma_channels;
+ goto exit_regs;
ret = gpmi_get_clks(this);
if (ret)
@@ -675,18 +632,12 @@ static int acquire_resources(struct gpmi_nand_data *this)
exit_clock:
release_dma_channels(this);
-exit_dma_channels:
- release_bch_irq(this);
exit_regs:
- release_register_block(this);
return ret;
}
static void release_resources(struct gpmi_nand_data *this)
{
- gpmi_put_clks(this);
- release_register_block(this);
- release_bch_irq(this);
release_dma_channels(this);
}
@@ -732,8 +683,7 @@ static int read_page_prepare(struct gpmi_nand_data *this,
length, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, dest_phys)) {
if (alt_size < length) {
- pr_err("%s, Alternate buffer is too small\n",
- __func__);
+ dev_err(dev, "Alternate buffer is too small\n");
return -ENOMEM;
}
goto map_failed;
@@ -783,8 +733,7 @@ static int send_page_prepare(struct gpmi_nand_data *this,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, source_phys)) {
if (alt_size < length) {
- pr_err("%s, Alternate buffer is too small\n",
- __func__);
+ dev_err(dev, "Alternate buffer is too small\n");
return -ENOMEM;
}
goto map_failed;
@@ -837,14 +786,23 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
{
struct bch_geometry *geo = &this->bch_geometry;
struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
/* [1] Allocate a command buffer. PAGE_SIZE is enough. */
this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL);
if (this->cmd_buffer == NULL)
goto error_alloc;
- /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
- this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL);
+ /*
+ * [2] Allocate a read/write data buffer.
+ * The gpmi_alloc_dma_buffer can be called twice.
+ * We allocate a PAGE_SIZE length buffer if gpmi_alloc_dma_buffer
+ * is called before the nand_scan_ident; and we allocate a buffer
+ * of the real NAND page size when the gpmi_alloc_dma_buffer is
+ * called after the nand_scan_ident.
+ */
+ this->data_buffer_dma = kzalloc(mtd->writesize ?: PAGE_SIZE,
+ GFP_DMA | GFP_KERNEL);
if (this->data_buffer_dma == NULL)
goto error_alloc;
@@ -872,7 +830,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
error_alloc:
gpmi_free_dma_buffer(this);
- pr_err("Error allocating DMA buffers!\n");
return -ENOMEM;
}
@@ -904,7 +861,8 @@ static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
ret = gpmi_send_command(this);
if (ret)
- pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+ dev_err(this->dev, "Chip: %u, Error %d\n",
+ this->current_chip, ret);
this->command_length = 0;
}
@@ -935,7 +893,7 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
- pr_debug("len is %d\n", len);
+ dev_dbg(this->dev, "len is %d\n", len);
this->upper_buf = buf;
this->upper_len = len;
@@ -947,7 +905,7 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
- pr_debug("len is %d\n", len);
+ dev_dbg(this->dev, "len is %d\n", len);
this->upper_buf = (uint8_t *)buf;
this->upper_len = len;
@@ -1026,13 +984,13 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
unsigned int max_bitflips = 0;
int ret;
- pr_debug("page number is : %d\n", page);
+ dev_dbg(this->dev, "page number is : %d\n", page);
ret = read_page_prepare(this, buf, mtd->writesize,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
&payload_virt, &payload_phys);
if (ret) {
- pr_err("Inadequate DMA buffer\n");
+ dev_err(this->dev, "Inadequate DMA buffer\n");
ret = -ENOMEM;
return ret;
}
@@ -1046,7 +1004,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
nfc_geo->payload_size,
payload_virt, payload_phys);
if (ret) {
- pr_err("Error in ECC-based read: %d\n", ret);
+ dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
return ret;
}
@@ -1102,7 +1060,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_addr_t auxiliary_phys;
int ret;
- pr_debug("ecc write page.\n");
+ dev_dbg(this->dev, "ecc write page.\n");
if (this->swap_block_mark) {
/*
* If control arrives here, we're doing block mark swapping.
@@ -1132,7 +1090,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
nfc_geo->payload_size,
&payload_virt, &payload_phys);
if (ret) {
- pr_err("Inadequate payload DMA buffer\n");
+ dev_err(this->dev, "Inadequate payload DMA buffer\n");
return 0;
}
@@ -1142,7 +1100,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
nfc_geo->auxiliary_size,
&auxiliary_virt, &auxiliary_phys);
if (ret) {
- pr_err("Inadequate auxiliary DMA buffer\n");
+ dev_err(this->dev, "Inadequate auxiliary DMA buffer\n");
goto exit_auxiliary;
}
}
@@ -1150,7 +1108,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
/* Ask the NFC. */
ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
if (ret)
- pr_err("Error in ECC-based write: %d\n", ret);
+ dev_err(this->dev, "Error in ECC-based write: %d\n", ret);
if (!this->swap_block_mark) {
send_page_end(this, chip->oob_poi, mtd->oobsize,
@@ -1240,7 +1198,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
{
struct gpmi_nand_data *this = chip->priv;
- pr_debug("page number is %d\n", page);
+ dev_dbg(this->dev, "page number is %d\n", page);
/* clear the OOB buffer */
memset(chip->oob_poi, ~0, mtd->oobsize);
@@ -1453,7 +1411,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
/* Write the NCB fingerprint into the page buffer. */
memset(buffer, ~0, mtd->writesize);
- memset(chip->oob_poi, ~0, mtd->oobsize);
memcpy(buffer + 12, fingerprint, strlen(fingerprint));
/* Loop through the first search area, writing NCB fingerprints. */
@@ -1568,7 +1525,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
/* Set up the NFC geometry which is used by BCH. */
ret = bch_set_geometry(this);
if (ret) {
- pr_err("Error setting BCH geometry : %d\n", ret);
+ dev_err(this->dev, "Error setting BCH geometry : %d\n", ret);
return ret;
}
@@ -1576,20 +1533,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
return gpmi_alloc_dma_buffer(this);
}
-static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
-{
- /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
- if (GPMI_IS_MX23(this))
- this->swap_block_mark = false;
- else
- this->swap_block_mark = true;
-
- /* Set up the medium geometry */
- return gpmi_set_geometry(this);
-
-}
-
-static void gpmi_nfc_exit(struct gpmi_nand_data *this)
+static void gpmi_nand_exit(struct gpmi_nand_data *this)
{
nand_release(&this->mtd);
gpmi_free_dma_buffer(this);
@@ -1603,8 +1547,11 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
struct bch_geometry *bch_geo = &this->bch_geometry;
int ret;
- /* Prepare for the BBT scan. */
- ret = gpmi_pre_bbt_scan(this);
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ this->swap_block_mark = !GPMI_IS_MX23(this);
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
if (ret)
return ret;
@@ -1629,7 +1576,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
return 0;
}
-static int gpmi_nfc_init(struct gpmi_nand_data *this)
+static int gpmi_nand_init(struct gpmi_nand_data *this)
{
struct mtd_info *mtd = &this->mtd;
struct nand_chip *chip = &this->nand;
@@ -1693,7 +1640,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this)
return 0;
err_out:
- gpmi_nfc_exit(this);
+ gpmi_nand_exit(this);
return ret;
}
@@ -1728,15 +1675,13 @@ static int gpmi_nand_probe(struct platform_device *pdev)
if (of_id) {
pdev->id_entry = of_id->data;
} else {
- pr_err("Failed to find the right device id.\n");
+ dev_err(&pdev->dev, "Failed to find the right device id.\n");
return -ENODEV;
}
this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
- if (!this) {
- pr_err("Failed to allocate per-device memory\n");
+ if (!this)
return -ENOMEM;
- }
platform_set_drvdata(pdev, this);
this->pdev = pdev;
@@ -1750,7 +1695,7 @@ static int gpmi_nand_probe(struct platform_device *pdev)
if (ret)
goto exit_nfc_init;
- ret = gpmi_nfc_init(this);
+ ret = gpmi_nand_init(this);
if (ret)
goto exit_nfc_init;
@@ -1770,7 +1715,7 @@ static int gpmi_nand_remove(struct platform_device *pdev)
{
struct gpmi_nand_data *this = platform_get_drvdata(pdev);
- gpmi_nfc_exit(this);
+ gpmi_nand_exit(this);
release_resources(this);
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index a7685e3..4c801fa 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -26,8 +26,6 @@
struct resources {
void __iomem *gpmi_regs;
void __iomem *bch_regs;
- unsigned int bch_low_interrupt;
- unsigned int bch_high_interrupt;
unsigned int dma_low_channel;
unsigned int dma_high_channel;
struct clk *clock[GPMI_CLK_MAX];
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index a264b88..a2c804d 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -416,10 +416,8 @@ static int jz_nand_probe(struct platform_device *pdev)
uint8_t nand_maf_id = 0, nand_dev_id = 0;
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
- if (!nand) {
- dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+ if (!nand)
return -ENOMEM;
- }
ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
if (ret)
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index 327d96c..687478c 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -539,20 +539,6 @@ static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd,
return 0;
}
-static int lpc32xx_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw)
-{
- int res;
-
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
- res = lpc32xx_write_page_lowlevel(mtd, chip, buf, oob_required);
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- lpc32xx_waitfunc(mtd, chip);
-
- return res;
-}
-
static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
@@ -627,10 +613,8 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
struct device_node *np = dev->of_node;
ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
- if (!ncfg) {
- dev_err(dev, "could not allocate memory for platform data\n");
+ if (!ncfg)
return NULL;
- }
of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay);
of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay);
@@ -666,10 +650,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
- if (!host) {
- dev_err(&pdev->dev, "failed to allocate device structure.\n");
+ if (!host)
return -ENOMEM;
- }
rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->io_base = devm_ioremap_resource(&pdev->dev, rc);
@@ -732,9 +714,9 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_chip->ecc.write_oob = lpc32xx_write_oob;
nand_chip->ecc.read_oob = lpc32xx_read_oob;
nand_chip->ecc.strength = 4;
- nand_chip->write_page = lpc32xx_write_page;
nand_chip->waitfunc = lpc32xx_waitfunc;
+ nand_chip->options = NAND_NO_SUBPAGE_WRITE;
nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
nand_chip->bbt_td = &lpc32xx_nand_bbt;
nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror;
@@ -764,14 +746,12 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
if (!host->dma_buf) {
- dev_err(&pdev->dev, "Error allocating dma_buf memory\n");
res = -ENOMEM;
goto err_exit3;
}
host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
if (!host->dummy_buf) {
- dev_err(&pdev->dev, "Error allocating dummy_buf memory\n");
res = -ENOMEM;
goto err_exit3;
}
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 23e6974..53a6742 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -725,10 +725,8 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
struct device_node *np = dev->of_node;
ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
- if (!ncfg) {
- dev_err(dev, "could not allocate memory for NAND config\n");
+ if (!ncfg)
return NULL;
- }
of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks);
of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth);
@@ -772,10 +770,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
- if (!host) {
- dev_err(&pdev->dev, "failed to allocate device structure\n");
+ if (!host)
return -ENOMEM;
- }
host->io_base_dma = rc->start;
host->io_base = devm_ioremap_resource(&pdev->dev, rc);
@@ -791,8 +787,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
}
if (host->ncfg->wp_gpio == -EPROBE_DEFER)
return -EPROBE_DEFER;
- if (gpio_is_valid(host->ncfg->wp_gpio) &&
- gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
+ if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
+ host->ncfg->wp_gpio, "NAND WP")) {
dev_err(&pdev->dev, "GPIO not available\n");
return -EBUSY;
}
@@ -808,7 +804,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
mtd->dev.parent = &pdev->dev;
/* Get NAND clock */
- host->clk = clk_get(&pdev->dev, NULL);
+ host->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "Clock failure\n");
res = -ENOENT;
@@ -858,7 +854,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len,
GFP_KERNEL);
if (host->data_buf == NULL) {
- dev_err(&pdev->dev, "Error allocating memory\n");
res = -ENOMEM;
goto err_exit2;
}
@@ -927,10 +922,8 @@ err_exit3:
dma_release_channel(host->dma_chan);
err_exit2:
clk_disable(host->clk);
- clk_put(host->clk);
err_exit1:
lpc32xx_wp_enable(host);
- gpio_free(host->ncfg->wp_gpio);
return res;
}
@@ -953,9 +946,7 @@ static int lpc32xx_nand_remove(struct platform_device *pdev)
writel(tmp, SLC_CTRL(host->io_base));
clk_disable(host->clk);
- clk_put(host->clk);
lpc32xx_wp_enable(host);
- gpio_free(host->ncfg->wp_gpio);
return 0;
}
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 439bc38..61e2abc 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -653,10 +653,8 @@ static int mpc5121_nfc_probe(struct platform_device *op)
}
prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
- if (!prv) {
- dev_err(dev, "Memory exhausted!\n");
+ if (!prv)
return -ENOMEM;
- }
mtd = &prv->mtd;
chip = &prv->chip;
@@ -786,7 +784,6 @@ static int mpc5121_nfc_probe(struct platform_device *op)
/* Detect NAND chips */
if (nand_scan(mtd, be32_to_cpup(chips_no))) {
dev_err(dev, "NAND Flash not found !\n");
- devm_free_irq(dev, prv->irq, mtd);
retval = -ENXIO;
goto error;
}
@@ -811,7 +808,6 @@ static int mpc5121_nfc_probe(struct platform_device *op)
default:
dev_err(dev, "Unsupported NAND flash!\n");
- devm_free_irq(dev, prv->irq, mtd);
retval = -ENXIO;
goto error;
}
@@ -822,7 +818,6 @@ static int mpc5121_nfc_probe(struct platform_device *op)
retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (retval) {
dev_err(dev, "Error adding MTD device!\n");
- devm_free_irq(dev, prv->irq, mtd);
goto error;
}
@@ -836,11 +831,8 @@ static int mpc5121_nfc_remove(struct platform_device *op)
{
struct device *dev = &op->dev;
struct mtd_info *mtd = dev_get_drvdata(dev);
- struct nand_chip *chip = mtd->priv;
- struct mpc5121_nfc_prv *prv = chip->priv;
nand_release(mtd);
- devm_free_irq(dev, prv->irq, mtd);
mpc5121_nfc_free(dev, mtd);
return 0;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 9dfdb06..e9a4835 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -677,7 +677,6 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
ecc_stat >>= 4;
} while (--no_subpages);
- mtd->ecc_stats.corrected += ret;
pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
return ret;
@@ -1400,12 +1399,15 @@ static int mxcnd_probe(struct platform_device *pdev)
int err = 0;
/* Allocate memory for MTD device structure and private data */
- host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) +
- NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL);
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
+ GFP_KERNEL);
if (!host)
return -ENOMEM;
- host->data_buf = (uint8_t *)(host + 1);
+ /* allocate a temporary buffer for the nand_scan_ident() */
+ host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
+ if (!host->data_buf)
+ return -ENOMEM;
host->dev = &pdev->dev;
/* structures must be linked */
@@ -1512,7 +1514,9 @@ static int mxcnd_probe(struct platform_device *pdev)
if (err)
return err;
- clk_prepare_enable(host->clk);
+ err = clk_prepare_enable(host->clk);
+ if (err)
+ return err;
host->clk_act = 1;
/*
@@ -1531,6 +1535,15 @@ static int mxcnd_probe(struct platform_device *pdev)
goto escan;
}
+ /* allocate the right size buffer now */
+ devm_kfree(&pdev->dev, (void *)host->data_buf);
+ host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
+ GFP_KERNEL);
+ if (!host->data_buf) {
+ err = -ENOMEM;
+ goto escan;
+ }
+
/* Call preset again, with correct writesize this time */
host->devtype_data->preset(mtd);
@@ -1576,6 +1589,8 @@ static int mxcnd_remove(struct platform_device *pdev)
struct mxc_nand_host *host = platform_get_drvdata(pdev);
nand_release(&host->mtd);
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
return 0;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bd39f7b..59eba5d 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -29,6 +29,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -202,6 +204,51 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
}
/**
+ * nand_write_byte - [DEFAULT] write single byte to chip
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0]
+ */
+static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ chip->write_buf(mtd, &byte, 1);
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
+ */
+static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint16_t word = byte;
+
+ /*
+ * It's not entirely clear what should happen to I/O[15:8] when writing
+ * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
+ *
+ * When the host supports a 16-bit bus width, only data is
+ * transferred at the 16-bit width. All address and command line
+ * transfers shall use only the lower 8-bits of the data bus. During
+ * command transfers, the host may place any value on the upper
+ * 8-bits of the data bus. During address transfers, the host shall
+ * set the upper 8-bits of the data bus to 00h.
+ *
+ * One user of the write_byte callback is nand_onfi_set_features. The
+ * four parameters are specified to be written to I/O[7:0], but this is
+ * neither an address nor a command transfer. Let's assume a 0 on the
+ * upper I/O lines is OK.
+ */
+ chip->write_buf(mtd, (uint8_t *)&word, 2);
+}
+
+/**
* nand_write_buf - [DEFAULT] write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
@@ -1408,6 +1455,30 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
}
/**
+ * nand_setup_read_retry - [INTERN] Set the READ RETRY mode
+ * @mtd: MTD device structure
+ * @retry_mode: the retry mode to use
+ *
+ * Some vendors supply a special command to shift the Vt threshold, to be used
+ * when there are too many bitflips in a page (i.e., ECC error). After setting
+ * a new threshold, the host should retry reading the page.
+ */
+static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ pr_debug("setting READ RETRY mode %d\n", retry_mode);
+
+ if (retry_mode >= chip->read_retries)
+ return -EINVAL;
+
+ if (!chip->setup_read_retry)
+ return -EOPNOTSUPP;
+
+ return chip->setup_read_retry(mtd, retry_mode);
+}
+
+/**
* nand_do_read_ops - [INTERN] Read data with ECC
* @mtd: MTD device structure
* @from: offset to read from
@@ -1420,7 +1491,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
{
int chipnr, page, realpage, col, bytes, aligned, oob_required;
struct nand_chip *chip = mtd->priv;
- struct mtd_ecc_stats stats;
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
@@ -1429,8 +1499,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
uint8_t *bufpoi, *oob, *buf;
unsigned int max_bitflips = 0;
-
- stats = mtd->ecc_stats;
+ int retry_mode = 0;
+ bool ecc_fail = false;
chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
@@ -1445,6 +1515,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
oob_required = oob ? 1 : 0;
while (1) {
+ unsigned int ecc_failures = mtd->ecc_stats.failed;
+
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
@@ -1452,6 +1524,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
+read_retry:
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
/*
@@ -1481,7 +1554,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed) &&
+ !(mtd->ecc_stats.failed - ecc_failures) &&
(ops->mode != MTD_OPS_RAW)) {
chip->pagebuf = realpage;
chip->pagebuf_bitflips = ret;
@@ -1492,8 +1565,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
memcpy(buf, chip->buffers->databuf + col, bytes);
}
- buf += bytes;
-
if (unlikely(oob)) {
int toread = min(oobreadlen, max_oobsize);
@@ -1511,6 +1582,25 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
else
nand_wait_ready(mtd);
}
+
+ if (mtd->ecc_stats.failed - ecc_failures) {
+ if (retry_mode + 1 <= chip->read_retries) {
+ retry_mode++;
+ ret = nand_setup_read_retry(mtd,
+ retry_mode);
+ if (ret < 0)
+ break;
+
+ /* Reset failures; retry */
+ mtd->ecc_stats.failed = ecc_failures;
+ goto read_retry;
+ } else {
+ /* No more retry modes; real failure */
+ ecc_fail = true;
+ }
+ }
+
+ buf += bytes;
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1520,6 +1610,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
readlen -= bytes;
+ /* Reset to retry mode 0 */
+ if (retry_mode) {
+ ret = nand_setup_read_retry(mtd, 0);
+ if (ret < 0)
+ break;
+ retry_mode = 0;
+ }
+
if (!readlen)
break;
@@ -1545,7 +1643,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (ret < 0)
return ret;
- if (mtd->ecc_stats.failed - stats.failed)
+ if (ecc_fail)
return -EBADMSG;
return max_bitflips;
@@ -2716,6 +2814,7 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
int addr, uint8_t *subfeature_param)
{
int status;
+ int i;
if (!chip->onfi_version ||
!(le16_to_cpu(chip->onfi_params.opt_cmd)
@@ -2723,7 +2822,9 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
return -EINVAL;
chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
- chip->write_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+ chip->write_byte(mtd, subfeature_param[i]);
+
status = chip->waitfunc(mtd, chip);
if (status & NAND_STATUS_FAIL)
return -EIO;
@@ -2740,6 +2841,8 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
int addr, uint8_t *subfeature_param)
{
+ int i;
+
if (!chip->onfi_version ||
!(le16_to_cpu(chip->onfi_params.opt_cmd)
& ONFI_OPT_CMD_SET_GET_FEATURES))
@@ -2749,7 +2852,8 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
- chip->read_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+ *subfeature_param++ = chip->read_byte(mtd);
return 0;
}
@@ -2812,6 +2916,8 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
chip->block_markbad = nand_default_block_markbad;
if (!chip->write_buf || chip->write_buf == nand_write_buf)
chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+ if (!chip->write_byte || chip->write_byte == nand_write_byte)
+ chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
if (!chip->read_buf || chip->read_buf == nand_read_buf)
chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
if (!chip->scan_bbt)
@@ -2926,6 +3032,30 @@ ext_out:
return ret;
}
+static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+ return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+ feature);
+}
+
+/*
+ * Configure chip properties from Micron vendor-specific ONFI table
+ */
+static void nand_onfi_detect_micron(struct nand_chip *chip,
+ struct nand_onfi_params *p)
+{
+ struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
+
+ if (le16_to_cpu(p->vendor_revision) < 1)
+ return;
+
+ chip->read_retries = micron->read_retry_options;
+ chip->setup_read_retry = nand_setup_read_retry_micron;
+}
+
/*
* Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
@@ -2979,7 +3109,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->onfi_version = 10;
if (!chip->onfi_version) {
- pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
+ pr_info("unsupported ONFI version: %d\n", val);
return 0;
}
@@ -3032,6 +3162,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
pr_warn("Could not retrieve ONFI ECC requirements\n");
}
+ if (p->jedec_id == NAND_MFR_MICRON)
+ nand_onfi_detect_micron(chip, p);
+
return 1;
}
@@ -3152,9 +3285,12 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
mtd->oobsize = 512;
break;
case 6:
- default: /* Other cases are "reserved" (unknown) */
mtd->oobsize = 640;
break;
+ case 7:
+ default: /* Other cases are "reserved" (unknown) */
+ mtd->oobsize = 1024;
+ break;
}
extid >>= 2;
/* Calc blocksize */
@@ -3325,6 +3461,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
*busw = type->options & NAND_BUSWIDTH_16;
+ if (!mtd->name)
+ mtd->name = type->name;
+
return true;
}
return false;
@@ -3372,8 +3511,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- pr_info("%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
+ pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
*maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
@@ -3440,10 +3578,10 @@ ident_done:
* Check, if buswidth is correct. Hardware drivers should set
* chip correct!
*/
- pr_info("NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- pr_warn("NAND bus width %d instead %d bit\n",
+ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ *maf_id, *dev_id);
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("bus width %d instead %d bit\n",
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
busw ? 16 : 8);
return ERR_PTR(-EINVAL);
@@ -3472,14 +3610,13 @@ ident_done:
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)\n",
- *maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
+ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ *maf_id, *dev_id);
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name);
-
- pr_info("NAND device: %dMiB, %s, page size: %d, OOB size: %d\n",
+ pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->writesize, mtd->oobsize);
-
return type;
}
@@ -3535,7 +3672,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
chip->select_chip(mtd, -1);
}
if (i > 1)
- pr_info("%d NAND chips detected\n", i);
+ pr_info("%d chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
chip->numchips = i;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a87b0a3..daa2faa 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -169,6 +169,8 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_AMD, "AMD/Spansion"},
{NAND_MFR_MACRONIX, "Macronix"},
{NAND_MFR_EON, "Eon"},
+ {NAND_MFR_SANDISK, "SanDisk"},
+ {NAND_MFR_INTEL, "Intel"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 5211515..9ee09a8 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -241,12 +241,10 @@ static int nuc900_nand_probe(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand;
struct nand_chip *chip;
- int retval;
struct resource *res;
- retval = 0;
-
- nuc900_nand = kzalloc(sizeof(struct nuc900_nand), GFP_KERNEL);
+ nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand),
+ GFP_KERNEL);
if (!nuc900_nand)
return -ENOMEM;
chip = &(nuc900_nand->chip);
@@ -255,11 +253,9 @@ static int nuc900_nand_probe(struct platform_device *pdev)
nuc900_nand->mtd.owner = THIS_MODULE;
spin_lock_init(&nuc900_nand->lock);
- nuc900_nand->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(nuc900_nand->clk)) {
- retval = -ENOENT;
- goto fail1;
- }
+ nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(nuc900_nand->clk))
+ return -ENOENT;
clk_enable(nuc900_nand->clk);
chip->cmdfunc = nuc900_nand_command_lp;
@@ -272,57 +268,29 @@ static int nuc900_nand_probe(struct platform_device *pdev)
chip->ecc.mode = NAND_ECC_SOFT;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- retval = -ENXIO;
- goto fail1;
- }
-
- if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
- retval = -EBUSY;
- goto fail1;
- }
-
- nuc900_nand->reg = ioremap(res->start, resource_size(res));
- if (!nuc900_nand->reg) {
- retval = -ENOMEM;
- goto fail2;
- }
+ nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(nuc900_nand->reg))
+ return PTR_ERR(nuc900_nand->reg);
nuc900_nand_enable(nuc900_nand);
- if (nand_scan(&(nuc900_nand->mtd), 1)) {
- retval = -ENXIO;
- goto fail3;
- }
+ if (nand_scan(&(nuc900_nand->mtd), 1))
+ return -ENXIO;
mtd_device_register(&(nuc900_nand->mtd), partitions,
ARRAY_SIZE(partitions));
platform_set_drvdata(pdev, nuc900_nand);
- return retval;
-
-fail3: iounmap(nuc900_nand->reg);
-fail2: release_mem_region(res->start, resource_size(res));
-fail1: kfree(nuc900_nand);
- return retval;
+ return 0;
}
static int nuc900_nand_remove(struct platform_device *pdev)
{
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
- struct resource *res;
nand_release(&nuc900_nand->mtd);
- iounmap(nuc900_nand->reg);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
clk_disable(nuc900_nand->clk);
- clk_put(nuc900_nand->clk);
-
- kfree(nuc900_nand);
return 0;
}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f777250..ef4190a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1730,13 +1730,7 @@ static int omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_POLLED:
- if (nand_chip->options & NAND_BUSWIDTH_16) {
- nand_chip->read_buf = omap_read_buf16;
- nand_chip->write_buf = omap_write_buf16;
- } else {
- nand_chip->read_buf = omap_read_buf8;
- nand_chip->write_buf = omap_write_buf8;
- }
+ /* Use nand_base defaults for {read,write}_buf */
break;
case NAND_OMAP_PREFETCH_DMA:
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index a393a5b..dd7fe81 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -87,7 +87,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
- printk(KERN_ERR "orion_nand: failed to allocate device structure.\n");
ret = -ENOMEM;
goto no_res;
}
@@ -101,7 +100,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
io_base = ioremap(res->start, resource_size(res));
if (!io_base) {
- printk(KERN_ERR "orion_nand: ioremap failed\n");
+ dev_err(&pdev->dev, "ioremap failed\n");
ret = -EIO;
goto no_res;
}
@@ -110,7 +109,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
GFP_KERNEL);
if (!board) {
- printk(KERN_ERR "orion_nand: failed to allocate board structure.\n");
ret = -ENOMEM;
goto no_res;
}
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 4d17436..90f871a 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -223,7 +223,7 @@ MODULE_DEVICE_TABLE(of, pasemi_nand_match);
static struct platform_driver pasemi_nand_driver =
{
.driver = {
- .name = (char*)driver_name,
+ .name = driver_name,
.owner = THIS_MODULE,
.of_match_table = pasemi_nand_match,
},
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index cad4cdc..0b068a5 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -9,6 +9,7 @@
*
*/
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -47,30 +48,16 @@ static int plat_nand_probe(struct platform_device *pdev)
return -EINVAL;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-
/* Allocate memory for the device structure (and zero it) */
- data = kzalloc(sizeof(struct plat_nand_data), GFP_KERNEL);
- if (!data) {
- dev_err(&pdev->dev, "failed to allocate device structure.\n");
+ data = devm_kzalloc(&pdev->dev, sizeof(struct plat_nand_data),
+ GFP_KERNEL);
+ if (!data)
return -ENOMEM;
- }
-
- if (!request_mem_region(res->start, resource_size(res),
- dev_name(&pdev->dev))) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
- err = -EBUSY;
- goto out_free;
- }
- data->io_base = ioremap(res->start, resource_size(res));
- if (data->io_base == NULL) {
- dev_err(&pdev->dev, "ioremap failed\n");
- err = -EIO;
- goto out_release_io;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->io_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->io_base))
+ return PTR_ERR(data->io_base);
data->chip.priv = &data;
data->mtd.priv = &data->chip;
@@ -122,11 +109,6 @@ static int plat_nand_probe(struct platform_device *pdev)
out:
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
- iounmap(data->io_base);
-out_release_io:
- release_mem_region(res->start, resource_size(res));
-out_free:
- kfree(data);
return err;
}
@@ -137,16 +119,10 @@ static int plat_nand_remove(struct platform_device *pdev)
{
struct plat_nand_data *data = platform_get_drvdata(pdev);
struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev);
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_release(&data->mtd);
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
- iounmap(data->io_base);
- release_mem_region(res->start, resource_size(res));
- kfree(data);
return 0;
}
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 4b3aaa8..2a7a0b2 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -7,6 +7,8 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * See Documentation/mtd/nand/pxa3xx-nand.txt for more details.
*/
#include <linux/kernel.h>
@@ -24,6 +26,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#define ARCH_HAS_DMA
@@ -35,6 +38,7 @@
#include <linux/platform_data/mtd-nand-pxa3xx.h>
+#define NAND_DEV_READY_TIMEOUT 50
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#define NAND_STOP_DELAY (2 * HZ/50)
#define PAGE_CHUNK_SIZE (2048)
@@ -54,6 +58,7 @@
#define NDPCR (0x18) /* Page Count Register */
#define NDBDR0 (0x1C) /* Bad Block Register 0 */
#define NDBDR1 (0x20) /* Bad Block Register 1 */
+#define NDECCCTRL (0x28) /* ECC control */
#define NDDB (0x40) /* Data Buffer */
#define NDCB0 (0x48) /* Command Buffer0 */
#define NDCB1 (0x4C) /* Command Buffer1 */
@@ -80,6 +85,9 @@
#define NDCR_INT_MASK (0xFFF)
#define NDSR_MASK (0xfff)
+#define NDSR_ERR_CNT_OFF (16)
+#define NDSR_ERR_CNT_MASK (0x1f)
+#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
#define NDSR_RDY (0x1 << 12)
#define NDSR_FLASH_RDY (0x1 << 11)
#define NDSR_CS0_PAGED (0x1 << 10)
@@ -88,8 +96,8 @@
#define NDSR_CS1_CMDD (0x1 << 7)
#define NDSR_CS0_BBD (0x1 << 6)
#define NDSR_CS1_BBD (0x1 << 5)
-#define NDSR_DBERR (0x1 << 4)
-#define NDSR_SBERR (0x1 << 3)
+#define NDSR_UNCORERR (0x1 << 4)
+#define NDSR_CORERR (0x1 << 3)
#define NDSR_WRDREQ (0x1 << 2)
#define NDSR_RDDREQ (0x1 << 1)
#define NDSR_WRCMDREQ (0x1)
@@ -98,6 +106,8 @@
#define NDCB0_ST_ROW_EN (0x1 << 26)
#define NDCB0_AUTO_RS (0x1 << 25)
#define NDCB0_CSEL (0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
#define NDCB0_CMD_TYPE_MASK (0x7 << 21)
#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
#define NDCB0_NC (0x1 << 20)
@@ -108,6 +118,14 @@
#define NDCB0_CMD1_MASK (0xff)
#define NDCB0_ADDR_CYC_SHIFT (16)
+#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ 4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL 3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
+
/* macros for registers read/write */
#define nand_writel(info, off, val) \
__raw_writel((val), (info)->mmio_base + (off))
@@ -120,9 +138,9 @@ enum {
ERR_NONE = 0,
ERR_DMABUSERR = -1,
ERR_SENDCMD = -2,
- ERR_DBERR = -3,
+ ERR_UNCORERR = -3,
ERR_BBERR = -4,
- ERR_SBERR = -5,
+ ERR_CORERR = -5,
};
enum {
@@ -149,7 +167,6 @@ struct pxa3xx_nand_host {
void *info_data;
/* page size of attached chip */
- unsigned int page_size;
int use_ecc;
int cs;
@@ -167,11 +184,13 @@ struct pxa3xx_nand_info {
struct clk *clk;
void __iomem *mmio_base;
unsigned long mmio_phys;
- struct completion cmd_complete;
+ struct completion cmd_complete, dev_ready;
unsigned int buf_start;
unsigned int buf_count;
unsigned int buf_size;
+ unsigned int data_buff_pos;
+ unsigned int oob_buff_pos;
/* DMA information */
int drcmr_dat;
@@ -195,13 +214,18 @@ struct pxa3xx_nand_info {
int cs;
int use_ecc; /* use HW ECC ? */
+ int ecc_bch; /* using BCH ECC? */
int use_dma; /* use DMA ? */
int use_spare; /* use spare ? */
- int is_ready;
+ int need_wait;
- unsigned int page_size; /* page size of attached chip */
- unsigned int data_size; /* data size in FIFO */
+ unsigned int data_size; /* data to be read from FIFO */
+ unsigned int chunk_size; /* split commands chunk size */
unsigned int oob_size;
+ unsigned int spare_size;
+ unsigned int ecc_size;
+ unsigned int ecc_err_cnt;
+ unsigned int max_bitflips;
int retcode;
/* cached register value */
@@ -239,6 +263,64 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
{ "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
};
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_mirror_pattern
+};
+
+static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
+ .eccbytes = 32,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { {2, 30} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+ .eccbytes = 64,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ /* Bootrom looks in bytes 0 & 5 for bad blocks */
+ .oobfree = { {6, 26}, { 64, 32} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+ .eccbytes = 128,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { }
+};
+
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
@@ -256,6 +338,29 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
+static struct of_device_id pxa3xx_nand_dt_ids[] = {
+ {
+ .compatible = "marvell,pxa3xx-nand",
+ .data = (void *)PXA3XX_NAND_VARIANT_PXA,
+ },
+ {
+ .compatible = "marvell,armada370-nand",
+ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
+
+static enum pxa3xx_nand_variant
+pxa3xx_nand_get_variant(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+ if (!of_id)
+ return PXA3XX_NAND_VARIANT_PXA;
+ return (enum pxa3xx_nand_variant)of_id->data;
+}
+
static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
const struct pxa3xx_nand_timing *t)
{
@@ -280,25 +385,23 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
nand_writel(info, NDTR1CS0, ndtr1);
}
-static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
+/*
+ * Set the data and OOB size, depending on the selected
+ * spare and ECC configuration.
+ * Only applicable to READ0, READOOB and PAGEPROG commands.
+ */
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
+ struct mtd_info *mtd)
{
- struct pxa3xx_nand_host *host = info->host[info->cs];
int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
- info->data_size = host->page_size;
- if (!oob_enable) {
- info->oob_size = 0;
+ info->data_size = mtd->writesize;
+ if (!oob_enable)
return;
- }
- switch (host->page_size) {
- case 2048:
- info->oob_size = (info->use_ecc) ? 40 : 64;
- break;
- case 512:
- info->oob_size = (info->use_ecc) ? 8 : 16;
- break;
- }
+ info->oob_size = info->spare_size;
+ if (!info->use_ecc)
+ info->oob_size += info->ecc_size;
}
/**
@@ -313,10 +416,15 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
ndcr = info->reg_ndcr;
- if (info->use_ecc)
+ if (info->use_ecc) {
ndcr |= NDCR_ECC_EN;
- else
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x1);
+ } else {
ndcr &= ~NDCR_ECC_EN;
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x0);
+ }
if (info->use_dma)
ndcr |= NDCR_DMA_EN;
@@ -375,26 +483,39 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
static void handle_data_pio(struct pxa3xx_nand_info *info)
{
+ unsigned int do_bytes = min(info->data_size, info->chunk_size);
+
switch (info->state) {
case STATE_PIO_WRITING:
- __raw_writesl(info->mmio_base + NDDB, info->data_buff,
- DIV_ROUND_UP(info->data_size, 4));
+ __raw_writesl(info->mmio_base + NDDB,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
if (info->oob_size > 0)
- __raw_writesl(info->mmio_base + NDDB, info->oob_buff,
- DIV_ROUND_UP(info->oob_size, 4));
+ __raw_writesl(info->mmio_base + NDDB,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
break;
case STATE_PIO_READING:
- __raw_readsl(info->mmio_base + NDDB, info->data_buff,
- DIV_ROUND_UP(info->data_size, 4));
+ __raw_readsl(info->mmio_base + NDDB,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
if (info->oob_size > 0)
- __raw_readsl(info->mmio_base + NDDB, info->oob_buff,
- DIV_ROUND_UP(info->oob_size, 4));
+ __raw_readsl(info->mmio_base + NDDB,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
break;
default:
dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
+
+ /* Update buffer pointers for multi-page read/write */
+ info->data_buff_pos += do_bytes;
+ info->oob_buff_pos += info->oob_size;
+ info->data_size -= do_bytes;
}
#ifdef ARCH_HAS_DMA
@@ -452,7 +573,7 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
{
struct pxa3xx_nand_info *info = devid;
- unsigned int status, is_completed = 0;
+ unsigned int status, is_completed = 0, is_ready = 0;
unsigned int ready, cmd_done;
if (info->cs == 0) {
@@ -465,10 +586,25 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
status = nand_readl(info, NDSR);
- if (status & NDSR_DBERR)
- info->retcode = ERR_DBERR;
- if (status & NDSR_SBERR)
- info->retcode = ERR_SBERR;
+ if (status & NDSR_UNCORERR)
+ info->retcode = ERR_UNCORERR;
+ if (status & NDSR_CORERR) {
+ info->retcode = ERR_CORERR;
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+ info->ecc_bch)
+ info->ecc_err_cnt = NDSR_ERR_CNT(status);
+ else
+ info->ecc_err_cnt = 1;
+
+ /*
+ * Each chunk composing a page is corrected independently,
+ * and we need to store maximum number of corrected bitflips
+ * to return it to the MTD layer in ecc.read_page().
+ */
+ info->max_bitflips = max_t(unsigned int,
+ info->max_bitflips,
+ info->ecc_err_cnt);
+ }
if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
/* whether use dma to transfer data */
if (info->use_dma) {
@@ -488,8 +624,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
is_completed = 1;
}
if (status & ready) {
- info->is_ready = 1;
info->state = STATE_READY;
+ is_ready = 1;
}
if (status & NDSR_WRCMDREQ) {
@@ -518,6 +654,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
nand_writel(info, NDSR, status);
if (is_completed)
complete(&info->cmd_complete);
+ if (is_ready)
+ complete(&info->dev_ready);
NORMAL_IRQ_EXIT:
return IRQ_HANDLED;
}
@@ -530,51 +668,94 @@ static inline int is_buf_blank(uint8_t *buf, size_t len)
return 1;
}
-static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
- uint16_t column, int page_addr)
+static void set_command_address(struct pxa3xx_nand_info *info,
+ unsigned int page_size, uint16_t column, int page_addr)
{
- int addr_cycle, exec_cmd;
- struct pxa3xx_nand_host *host;
- struct mtd_info *mtd;
+ /* small page addr setting */
+ if (page_size < PAGE_CHUNK_SIZE) {
+ info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
+ | (column & 0xFF);
- host = info->host[info->cs];
- mtd = host->mtd;
- addr_cycle = 0;
- exec_cmd = 1;
+ info->ndcb2 = 0;
+ } else {
+ info->ndcb1 = ((page_addr & 0xFFFF) << 16)
+ | (column & 0xFFFF);
+
+ if (page_addr & 0xFF0000)
+ info->ndcb2 = (page_addr & 0xFF0000) >> 16;
+ else
+ info->ndcb2 = 0;
+ }
+}
+
+static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
+{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
/* reset data and oob column point to handle data */
info->buf_start = 0;
info->buf_count = 0;
info->oob_size = 0;
+ info->data_buff_pos = 0;
+ info->oob_buff_pos = 0;
info->use_ecc = 0;
info->use_spare = 1;
- info->is_ready = 0;
info->retcode = ERR_NONE;
- if (info->cs != 0)
- info->ndcb0 = NDCB0_CSEL;
- else
- info->ndcb0 = 0;
+ info->ecc_err_cnt = 0;
+ info->ndcb3 = 0;
+ info->need_wait = 0;
switch (command) {
case NAND_CMD_READ0:
case NAND_CMD_PAGEPROG:
info->use_ecc = 1;
case NAND_CMD_READOOB:
- pxa3xx_set_datasize(info);
+ pxa3xx_set_datasize(info, mtd);
break;
case NAND_CMD_PARAM:
info->use_spare = 0;
break;
- case NAND_CMD_SEQIN:
- exec_cmd = 0;
- break;
default:
info->ndcb1 = 0;
info->ndcb2 = 0;
- info->ndcb3 = 0;
break;
}
+ /*
+ * If we are about to issue a read command, or about to set
+ * the write address, then clean the data buffer.
+ */
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READOOB ||
+ command == NAND_CMD_SEQIN) {
+
+ info->buf_count = mtd->writesize + mtd->oobsize;
+ memset(info->data_buff, 0xFF, info->buf_count);
+ }
+
+}
+
+static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+ int ext_cmd_type, uint16_t column, int page_addr)
+{
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
+
+ host = info->host[info->cs];
+ mtd = host->mtd;
+ addr_cycle = 0;
+ exec_cmd = 1;
+
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
+
+ if (command == NAND_CMD_SEQIN)
+ exec_cmd = 0;
+
addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ host->col_addr_cycles);
@@ -589,30 +770,42 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
if (command == NAND_CMD_READOOB)
info->buf_start += mtd->writesize;
- /* Second command setting for large pages */
- if (host->page_size >= PAGE_CHUNK_SIZE)
+ /*
+ * Multiple page read needs an 'extended command type' field,
+ * which is either naked-read or last-read according to the
+ * state.
+ */
+ if (mtd->writesize == PAGE_CHUNK_SIZE) {
info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+ } else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+ }
+
+ set_command_address(info, mtd->writesize, column, page_addr);
+ break;
case NAND_CMD_SEQIN:
- /* small page addr setting */
- if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
- info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
- | (column & 0xFF);
- info->ndcb2 = 0;
- } else {
- info->ndcb1 = ((page_addr & 0xFFFF) << 16)
- | (column & 0xFFFF);
+ info->buf_start = column;
+ set_command_address(info, mtd->writesize, 0, page_addr);
- if (page_addr & 0xFF0000)
- info->ndcb2 = (page_addr & 0xFF0000) >> 16;
- else
- info->ndcb2 = 0;
+ /*
+ * Multiple page programming needs to execute the initial
+ * SEQIN command that sets the page address.
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | addr_cycle
+ | command;
+ /* No data transfer in this case */
+ info->data_size = 0;
+ exec_cmd = 1;
}
-
- info->buf_count = mtd->writesize + mtd->oobsize;
- memset(info->data_buff, 0xFF, info->buf_count);
-
break;
case NAND_CMD_PAGEPROG:
@@ -622,13 +815,40 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
}
- info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
- | NDCB0_AUTO_RS
- | NDCB0_ST_ROW_EN
- | NDCB0_DBC
- | (NAND_CMD_PAGEPROG << 8)
- | NAND_CMD_SEQIN
- | addr_cycle;
+ /* Second command setting for large pages */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ /*
+ * Multiple page write uses the 'extended command'
+ * field. This can be used to issue a command dispatch
+ * or a naked-write depending on the current stage.
+ */
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+
+ /*
+ * This is the command dispatch that completes a chunked
+ * page program operation.
+ */
+ if (info->data_size == 0) {
+ info->ndcb0 = NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | command;
+ info->ndcb1 = 0;
+ info->ndcb2 = 0;
+ info->ndcb3 = 0;
+ }
+ } else {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_AUTO_RS
+ | NDCB0_ST_ROW_EN
+ | NDCB0_DBC
+ | (NAND_CMD_PAGEPROG << 8)
+ | NAND_CMD_SEQIN
+ | addr_cycle;
+ }
break;
case NAND_CMD_PARAM:
@@ -691,8 +911,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
return exec_cmd;
}
-static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
{
struct pxa3xx_nand_host *host = mtd->priv;
struct pxa3xx_nand_info *info = host->info_data;
@@ -717,10 +937,15 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
nand_writel(info, NDTR1CS0, info->ndtr1cs0);
}
+ prepare_start_command(info, command);
+
info->state = STATE_PREPARED;
- exec_cmd = prepare_command_pool(info, command, column, page_addr);
+ exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
if (exec_cmd) {
init_completion(&info->cmd_complete);
+ init_completion(&info->dev_ready);
+ info->need_wait = 1;
pxa3xx_nand_start(info);
ret = wait_for_completion_timeout(&info->cmd_complete,
@@ -734,6 +959,117 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
info->state = STATE_IDLE;
}
+static void nand_cmdfunc_extended(struct mtd_info *mtd,
+ const unsigned command,
+ int column, int page_addr)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int ret, exec_cmd, ext_cmd_type;
+
+ /*
+ * if this is a x16 device then convert the input
+ * "byte" address into a "word" address appropriate
+ * for indexing a word-oriented device
+ */
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ column /= 2;
+
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+ }
+
+ /* Select the extended command for the first command */
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ ext_cmd_type = EXT_CMD_TYPE_MONO;
+ break;
+ case NAND_CMD_SEQIN:
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ break;
+ case NAND_CMD_PAGEPROG:
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+ break;
+ default:
+ ext_cmd_type = 0;
+ break;
+ }
+
+ prepare_start_command(info, command);
+
+ /*
+ * Prepare the "is ready" completion before starting a command
+ * transaction sequence. If the command is not executed the
+ * completion will be completed, see below.
+ *
+ * We can do that inside the loop because the command variable
+ * is invariant and thus so is the exec_cmd.
+ */
+ info->need_wait = 1;
+ init_completion(&info->dev_ready);
+ do {
+ info->state = STATE_PREPARED;
+ exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+ column, page_addr);
+ if (!exec_cmd) {
+ info->need_wait = 0;
+ complete(&info->dev_ready);
+ break;
+ }
+
+ init_completion(&info->cmd_complete);
+ pxa3xx_nand_start(info);
+
+ ret = wait_for_completion_timeout(&info->cmd_complete,
+ CHIP_DELAY_TIMEOUT);
+ if (!ret) {
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
+ /* Stop State Machine for next command cycle */
+ pxa3xx_nand_stop(info);
+ break;
+ }
+
+ /* Check if the sequence is complete */
+ if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+ break;
+
+ /*
+ * After a splitted program command sequence has issued
+ * the command dispatch, the command sequence is complete.
+ */
+ if (info->data_size == 0 &&
+ command == NAND_CMD_PAGEPROG &&
+ ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
+ break;
+
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+ /* Last read: issue a 'last naked read' */
+ if (info->data_size == info->chunk_size)
+ ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+ else
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+
+ /*
+ * If a splitted program command has no more data to transfer,
+ * the command dispatch must be issued to complete.
+ */
+ } else if (command == NAND_CMD_PAGEPROG &&
+ info->data_size == 0) {
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ }
+ } while (1);
+
+ info->state = STATE_IDLE;
+}
+
static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
@@ -753,20 +1089,14 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- if (info->retcode == ERR_SBERR) {
- switch (info->use_ecc) {
- case 1:
- mtd->ecc_stats.corrected++;
- break;
- case 0:
- default:
- break;
- }
- } else if (info->retcode == ERR_DBERR) {
+ if (info->retcode == ERR_CORERR && info->use_ecc) {
+ mtd->ecc_stats.corrected += info->ecc_err_cnt;
+
+ } else if (info->retcode == ERR_UNCORERR) {
/*
* for blank page (all 0xff), HW will calculate its ECC as
* 0, which is different from the ECC information within
- * OOB, ignore such double bit errors
+ * OOB, ignore such uncorrectable errors
*/
if (is_buf_blank(buf, mtd->writesize))
info->retcode = ERR_NONE;
@@ -774,7 +1104,7 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
mtd->ecc_stats.failed++;
}
- return 0;
+ return info->max_bitflips;
}
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
@@ -833,21 +1163,27 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
struct pxa3xx_nand_host *host = mtd->priv;
struct pxa3xx_nand_info *info = host->info_data;
+ int ret;
+
+ if (info->need_wait) {
+ ret = wait_for_completion_timeout(&info->dev_ready,
+ CHIP_DELAY_TIMEOUT);
+ info->need_wait = 0;
+ if (!ret) {
+ dev_err(&info->pdev->dev, "Ready time out!!!\n");
+ return NAND_STATUS_FAIL;
+ }
+ }
/* pxa3xx_nand_send_command has waited for command complete */
if (this->state == FL_WRITING || this->state == FL_ERASING) {
if (info->retcode == ERR_NONE)
return 0;
- else {
- /*
- * any error make it return 0x01 which will tell
- * the caller the erase and write fail
- */
- return 0x01;
- }
+ else
+ return NAND_STATUS_FAIL;
}
- return 0;
+ return NAND_STATUS_READY;
}
static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
@@ -869,7 +1205,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
}
/* calculate flash information */
- host->page_size = f->page_size;
host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
@@ -906,13 +1241,15 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
uint32_t ndcr = nand_readl(info, NDCR);
if (ndcr & NDCR_PAGE_SZ) {
- host->page_size = 2048;
+ /* Controller's FIFO size */
+ info->chunk_size = 2048;
host->read_id_bytes = 4;
} else {
- host->page_size = 512;
+ info->chunk_size = 512;
host->read_id_bytes = 2;
}
+ /* Set an initial chunk size */
info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
@@ -988,18 +1325,89 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
struct mtd_info *mtd;
+ struct nand_chip *chip;
int ret;
+
mtd = info->host[info->cs]->mtd;
+ chip = mtd->priv;
+
/* use the common timing to make a try */
ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
if (ret)
return ret;
- pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
- if (info->is_ready)
- return 0;
+ chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = chip->waitfunc(mtd, chip);
+ if (ret & NAND_STATUS_FAIL)
+ return -ENODEV;
+
+ return 0;
+}
- return -ENODEV;
+static int pxa_ecc_init(struct pxa3xx_nand_info *info,
+ struct nand_ecc_ctrl *ecc,
+ int strength, int ecc_stepsize, int page_size)
+{
+ if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+ info->chunk_size = 2048;
+ info->spare_size = 40;
+ info->ecc_size = 24;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+ return 1;
+
+ } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+ info->chunk_size = 512;
+ info->spare_size = 8;
+ info->ecc_size = 8;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+ return 1;
+
+ /*
+ * Required ECC: 4-bit correction per 512 bytes
+ * Select: 16-bit correction per 2048 bytes
+ */
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_2KB_bch4bit;
+ ecc->strength = 16;
+ return 1;
+
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch4bit;
+ ecc->strength = 16;
+ return 1;
+
+ /*
+ * Required ECC: 8-bit correction per 512 bytes
+ * Select: 16-bit correction per 1024 bytes
+ */
+ } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 1024;
+ info->spare_size = 0;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch8bit;
+ ecc->strength = 16;
+ return 1;
+ }
+ return 0;
}
static int pxa3xx_nand_scan(struct mtd_info *mtd)
@@ -1014,6 +1422,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
uint32_t id = -1;
uint64_t chipsize;
int i, ret, num;
+ uint16_t ecc_strength, ecc_step;
if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
goto KEEP_CONFIG;
@@ -1072,15 +1481,60 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
pxa3xx_flash_ids[1].name = NULL;
def = pxa3xx_flash_ids;
KEEP_CONFIG:
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.size = host->page_size;
- chip->ecc.strength = 1;
-
if (info->reg_ndcr & NDCR_DWIDTH_M)
chip->options |= NAND_BUSWIDTH_16;
+ /* Device detection must be done with ECC disabled */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDECCCTRL, 0x0);
+
if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
+
+ if (pdata->flash_bbt) {
+ /*
+ * We'll use a bad block table stored in-flash and don't
+ * allow writing the bad block marker to the flash.
+ */
+ chip->bbt_options |= NAND_BBT_USE_FLASH |
+ NAND_BBT_NO_OOB_BBM;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+ }
+
+ /*
+ * If the page size is bigger than the FIFO size, let's check
+ * we are given the right variant and then switch to the extended
+ * (aka splitted) command handling,
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+ chip->cmdfunc = nand_cmdfunc_extended;
+ } else {
+ dev_err(&info->pdev->dev,
+ "unsupported page size on this variant\n");
+ return -ENODEV;
+ }
+ }
+
+ ecc_strength = chip->ecc_strength_ds;
+ ecc_step = chip->ecc_step_ds;
+
+ /* Set default ECC strength requirements on non-ONFI devices */
+ if (ecc_strength < 1 && ecc_step < 1) {
+ ecc_strength = 1;
+ ecc_step = 512;
+ }
+
+ ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+ ecc_step, mtd->writesize);
+ if (!ret) {
+ dev_err(&info->pdev->dev,
+ "ECC strength %d at page size %d is not supported\n",
+ chip->ecc_strength_ds, mtd->writesize);
+ return -ENODEV;
+ }
+
/* calculate addressing information */
if (mtd->writesize >= 2048)
host->col_addr_cycles = 2;
@@ -1121,6 +1575,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
return -ENOMEM;
info->pdev = pdev;
+ info->variant = pxa3xx_nand_get_variant(pdev);
for (cs = 0; cs < pdata->num_cs; cs++) {
mtd = (struct mtd_info *)((unsigned int)&info[1] +
(sizeof(*mtd) + sizeof(*host)) * cs);
@@ -1138,11 +1593,12 @@ static int alloc_nand_resource(struct platform_device *pdev)
chip->controller = &info->controller;
chip->waitfunc = pxa3xx_nand_waitfunc;
chip->select_chip = pxa3xx_nand_select_chip;
- chip->cmdfunc = pxa3xx_nand_cmdfunc;
chip->read_word = pxa3xx_nand_read_word;
chip->read_byte = pxa3xx_nand_read_byte;
chip->read_buf = pxa3xx_nand_read_buf;
chip->write_buf = pxa3xx_nand_write_buf;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->cmdfunc = nand_cmdfunc;
}
spin_lock_init(&chip->controller->lock);
@@ -1254,25 +1710,6 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
return 0;
}
-static struct of_device_id pxa3xx_nand_dt_ids[] = {
- {
- .compatible = "marvell,pxa3xx-nand",
- .data = (void *)PXA3XX_NAND_VARIANT_PXA,
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
-
-static enum pxa3xx_nand_variant
-pxa3xx_nand_get_variant(struct platform_device *pdev)
-{
- const struct of_device_id *of_id =
- of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
- if (!of_id)
- return PXA3XX_NAND_VARIANT_PXA;
- return (enum pxa3xx_nand_variant)of_id->data;
-}
-
static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
{
struct pxa3xx_nand_platform_data *pdata;
@@ -1292,6 +1729,7 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
if (of_get_property(np, "marvell,nand-keep-config", NULL))
pdata->keep_config = 1;
of_property_read_u32(np, "num-cs", &pdata->num_cs);
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
pdev->dev.platform_data = pdata;
@@ -1329,7 +1767,6 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
}
info = platform_get_drvdata(pdev);
- info->variant = pxa3xx_nand_get_variant(pdev);
probe_success = 0;
for (cs = 0; cs < pdata->num_cs; cs++) {
struct mtd_info *mtd = info->host[cs]->mtd;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d65cbe9..f0918e7 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -46,9 +46,43 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/regs-nand.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
+#define S3C2410_NFECC S3C2410_NFREG(0x14)
+#define S3C2440_NFCONT S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA S3C2410_NFREG(0x10)
+#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
+#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
+#define S3C2412_NFSTAT S3C2410_NFREG(0x28)
+#define S3C2412_NFMECC0 S3C2410_NFREG(0x34)
+#define S3C2410_NFCONF_EN (1<<15)
+#define S3C2410_NFCONF_INITECC (1<<12)
+#define S3C2410_NFCONF_nFCE (1<<11)
+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
+#define S3C2410_NFSTAT_BUSY (1<<0)
+#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
+#define S3C2440_NFCONT_INITECC (1<<4)
+#define S3C2440_NFCONT_nFCE (1<<1)
+#define S3C2440_NFCONT_ENABLE (1<<0)
+#define S3C2440_NFSTAT_READY (1<<0)
+#define S3C2412_NFCONF_NANDBOOT (1<<31)
+#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5)
+#define S3C2412_NFCONT_nFCE0 (1<<1)
+#define S3C2412_NFSTAT_READY (1<<0)
+
/* new oob placement block for use with hardware ecc generation
*/
@@ -919,7 +953,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (info == NULL) {
- dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
goto exit_error;
}
@@ -974,7 +1007,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
size = nr_sets * sizeof(*info->mtds);
info->mtds = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (info->mtds == NULL) {
- dev_err(&pdev->dev, "failed to allocate mtd storage\n");
err = -ENOMEM;
goto exit_error;
}
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index a3c84eb..d72783d 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -151,7 +151,7 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
dma_cap_set(DMA_SLAVE, mask);
flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
- (void *)pdata->slave_id_fifo0_tx);
+ (void *)(uintptr_t)pdata->slave_id_fifo0_tx);
dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
flctl->chan_fifo0_tx);
@@ -168,7 +168,7 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
goto err;
flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
- (void *)pdata->slave_id_fifo0_rx);
+ (void *)(uintptr_t)pdata->slave_id_fifo0_rx);
dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
flctl->chan_fifo0_rx);
@@ -1021,7 +1021,6 @@ static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_OF
struct flctl_soc_config {
unsigned long flcmncr_val;
unsigned has_hwecc:1;
@@ -1059,10 +1058,8 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
GFP_KERNEL);
- if (!pdata) {
- dev_err(dev, "%s: failed to allocate config data\n", __func__);
+ if (!pdata)
return NULL;
- }
/* set SoC specific options */
pdata->flcmncr_val = config->flcmncr_val;
@@ -1080,12 +1077,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
return pdata;
}
-#else /* CONFIG_OF */
-static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
-{
- return NULL;
-}
-#endif /* CONFIG_OF */
static int flctl_probe(struct platform_device *pdev)
{
@@ -1094,38 +1085,30 @@ static int flctl_probe(struct platform_device *pdev)
struct mtd_info *flctl_mtd;
struct nand_chip *nand;
struct sh_flctl_platform_data *pdata;
- int ret = -ENXIO;
+ int ret;
int irq;
struct mtd_part_parser_data ppdata = {};
- flctl = kzalloc(sizeof(struct sh_flctl), GFP_KERNEL);
- if (!flctl) {
- dev_err(&pdev->dev, "failed to allocate driver data\n");
+ flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
+ if (!flctl)
return -ENOMEM;
- }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- goto err_iomap;
- }
-
- flctl->reg = ioremap(res->start, resource_size(res));
- if (flctl->reg == NULL) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- goto err_iomap;
- }
+ flctl->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(flctl->reg))
+ return PTR_ERR(flctl->reg);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get flste irq data\n");
- goto err_flste;
+ return -ENXIO;
}
- ret = request_irq(irq, flctl_handle_flste, IRQF_SHARED, "flste", flctl);
+ ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
+ "flste", flctl);
if (ret) {
dev_err(&pdev->dev, "request interrupt failed.\n");
- goto err_flste;
+ return ret;
}
if (pdev->dev.of_node)
@@ -1135,8 +1118,7 @@ static int flctl_probe(struct platform_device *pdev)
if (!pdata) {
dev_err(&pdev->dev, "no setup data defined\n");
- ret = -EINVAL;
- goto err_pdata;
+ return -EINVAL;
}
platform_set_drvdata(pdev, flctl);
@@ -1190,12 +1172,6 @@ static int flctl_probe(struct platform_device *pdev)
err_chip:
flctl_release_dma(flctl);
pm_runtime_disable(&pdev->dev);
-err_pdata:
- free_irq(irq, flctl);
-err_flste:
- iounmap(flctl->reg);
-err_iomap:
- kfree(flctl);
return ret;
}
@@ -1206,9 +1182,6 @@ static int flctl_remove(struct platform_device *pdev)
flctl_release_dma(flctl);
nand_release(&flctl->mtd);
pm_runtime_disable(&pdev->dev);
- free_irq(platform_get_irq(pdev, 0), flctl);
- iounmap(flctl->reg);
- kfree(flctl);
return 0;
}
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 87908d7..e81059b 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -121,10 +121,8 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* Allocate memory for MTD device structure and private data */
sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
- if (!sharpsl) {
- printk("Unable to allocate SharpSL NAND MTD device structure.\n");
+ if (!sharpsl)
return -ENOMEM;
- }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
@@ -136,7 +134,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* map physical address */
sharpsl->io = ioremap(r->start, resource_size(r));
if (!sharpsl->io) {
- printk("ioremap to access Sharp SL NAND chip failed\n");
+ dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
err = -EIO;
goto err_ioremap;
}
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index a3747c9..fb8fd35 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -371,11 +371,9 @@ static int tmio_probe(struct platform_device *dev)
if (data == NULL)
dev_warn(&dev->dev, "NULL platform data!\n");
- tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
- if (!tmio) {
- retval = -ENOMEM;
- goto err_kzalloc;
- }
+ tmio = devm_kzalloc(&dev->dev, sizeof(*tmio), GFP_KERNEL);
+ if (!tmio)
+ return -ENOMEM;
tmio->dev = dev;
@@ -385,22 +383,18 @@ static int tmio_probe(struct platform_device *dev)
mtd->priv = nand_chip;
mtd->name = "tmio-nand";
- tmio->ccr = ioremap(ccr->start, resource_size(ccr));
- if (!tmio->ccr) {
- retval = -EIO;
- goto err_iomap_ccr;
- }
+ tmio->ccr = devm_ioremap(&dev->dev, ccr->start, resource_size(ccr));
+ if (!tmio->ccr)
+ return -EIO;
tmio->fcr_base = fcr->start & 0xfffff;
- tmio->fcr = ioremap(fcr->start, resource_size(fcr));
- if (!tmio->fcr) {
- retval = -EIO;
- goto err_iomap_fcr;
- }
+ tmio->fcr = devm_ioremap(&dev->dev, fcr->start, resource_size(fcr));
+ if (!tmio->fcr)
+ return -EIO;
retval = tmio_hw_init(dev, tmio);
if (retval)
- goto err_hwinit;
+ return retval;
/* Set address of NAND IO lines */
nand_chip->IO_ADDR_R = tmio->fcr;
@@ -428,7 +422,8 @@ static int tmio_probe(struct platform_device *dev)
/* 15 us command delay time */
nand_chip->chip_delay = 15;
- retval = request_irq(irq, &tmio_irq, 0, dev_name(&dev->dev), tmio);
+ retval = devm_request_irq(&dev->dev, irq, &tmio_irq, 0,
+ dev_name(&dev->dev), tmio);
if (retval) {
dev_err(&dev->dev, "request_irq error %d\n", retval);
goto err_irq;
@@ -440,7 +435,7 @@ static int tmio_probe(struct platform_device *dev)
/* Scan to find existence of the device */
if (nand_scan(mtd, 1)) {
retval = -ENODEV;
- goto err_scan;
+ goto err_irq;
}
/* Register the partitions */
retval = mtd_device_parse_register(mtd, NULL, NULL,
@@ -451,18 +446,8 @@ static int tmio_probe(struct platform_device *dev)
nand_release(mtd);
-err_scan:
- if (tmio->irq)
- free_irq(tmio->irq, tmio);
err_irq:
tmio_hw_stop(dev, tmio);
-err_hwinit:
- iounmap(tmio->fcr);
-err_iomap_fcr:
- iounmap(tmio->ccr);
-err_iomap_ccr:
- kfree(tmio);
-err_kzalloc:
return retval;
}
@@ -471,12 +456,7 @@ static int tmio_remove(struct platform_device *dev)
struct tmio_nand *tmio = platform_get_drvdata(dev);
nand_release(&tmio->mtd);
- if (tmio->irq)
- free_irq(tmio->irq, tmio);
tmio_hw_stop(dev, tmio);
- iounmap(tmio->fcr);
- iounmap(tmio->ccr);
- kfree(tmio);
return 0;
}
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 235714a..c1622a5 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -319,11 +319,8 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
continue;
txx9_priv = kzalloc(sizeof(struct txx9ndfmc_priv),
GFP_KERNEL);
- if (!txx9_priv) {
- dev_err(&dev->dev, "Unable to allocate "
- "TXx9 NDFMC MTD device structure.\n");
+ if (!txx9_priv)
continue;
- }
chip = &txx9_priv->chip;
mtd = &txx9_priv->mtd;
mtd->owner = THIS_MODULE;
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index d64f8c3..aa26c32 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -81,7 +81,7 @@ static int parse_ofpart_partitions(struct mtd_info *master,
partname = of_get_property(pp, "label", &len);
if (!partname)
partname = of_get_property(pp, "name", &len);
- (*pparts)[i].name = (char *)partname;
+ (*pparts)[i].name = partname;
if (of_get_property(pp, "read-only", &len))
(*pparts)[i].mask_flags |= MTD_WRITEABLE;
@@ -152,7 +152,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master,
if (names && (plen > 0)) {
int len = strlen(names) + 1;
- (*pparts)[i].name = (char *)names;
+ (*pparts)[i].name = names;
plen -= len;
names += len;
} else {
@@ -173,18 +173,9 @@ static struct mtd_part_parser ofoldpart_parser = {
static int __init ofpart_parser_init(void)
{
- int rc;
- rc = register_mtd_parser(&ofpart_parser);
- if (rc)
- goto out;
-
- rc = register_mtd_parser(&ofoldpart_parser);
- if (!rc)
- return 0;
-
- deregister_mtd_parser(&ofoldpart_parser);
-out:
- return rc;
+ register_mtd_parser(&ofpart_parser);
+ register_mtd_parser(&ofoldpart_parser);
+ return 0;
}
static void __exit ofpart_parser_exit(void)
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 63699ff..8e1919b 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -58,7 +58,7 @@ static int generic_onenand_probe(struct platform_device *pdev)
goto out_release_mem_region;
}
- info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0;
+ info->onenand.mmcontrol = pdata ? pdata->mmcontrol : NULL;
info->onenand.irq = platform_get_irq(pdev, 0);
info->mtd.name = dev_name(&pdev->dev);
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 580035c..5da911e 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -300,7 +300,8 @@ MODULE_ALIAS("RedBoot");
static int __init redboot_parser_init(void)
{
- return register_mtd_parser(&redboot_parser);
+ register_mtd_parser(&redboot_parser);
+ return 0;
}
static void __exit redboot_parser_exit(void)
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index 7010660..e579f90 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -19,7 +19,7 @@
* or detected.
*/
-#if defined(CONFIG_MTD_NAND) || defined(CONFIG_MTD_NAND_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND)
struct nand_ecc_test {
const char *name;
diff --git a/fs/jffs2/malloc.c b/fs/jffs2/malloc.c
index 4f47aa2..b8fd651 100644
--- a/fs/jffs2/malloc.c
+++ b/fs/jffs2/malloc.c
@@ -288,6 +288,8 @@ struct jffs2_xattr_datum *jffs2_alloc_xattr_datum(void)
struct jffs2_xattr_datum *xd;
xd = kmem_cache_zalloc(xattr_datum_cache, GFP_KERNEL);
dbg_memalloc("%p\n", xd);
+ if (!xd)
+ return NULL;
xd->class = RAWNODE_CLASS_XATTR_DATUM;
xd->node = (void *)xd;
@@ -306,6 +308,8 @@ struct jffs2_xattr_ref *jffs2_alloc_xattr_ref(void)
struct jffs2_xattr_ref *ref;
ref = kmem_cache_zalloc(xattr_ref_cache, GFP_KERNEL);
dbg_memalloc("%p\n", ref);
+ if (!ref)
+ return NULL;
ref->class = RAWNODE_CLASS_XATTR_REF;
ref->node = (void *)ref;
diff --git a/include/linux/mtd/mtdram.h b/include/linux/mtd/mtdram.h
index 6889131..628a6a2 100644
--- a/include/linux/mtd/mtdram.h
+++ b/include/linux/mtd/mtdram.h
@@ -3,6 +3,6 @@
#include <linux/mtd/mtd.h>
int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
- unsigned long size, char *name);
+ unsigned long size, const char *name);
#endif /* __MTD_MTDRAM_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9e6c8f9..32f8612 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -219,6 +219,9 @@ struct nand_chip;
/* ONFI feature address */
#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
+/* Vendor-specific feature address (Micron) */
+#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
@@ -279,16 +282,17 @@ struct nand_onfi_params {
__le16 io_pin_capacitance_typ;
__le16 input_pin_capacitance_typ;
u8 input_pin_capacitance_max;
- u8 driver_strenght_support;
+ u8 driver_strength_support;
__le16 t_int_r;
__le16 t_ald;
u8 reserved4[7];
/* vendor */
- u8 reserved5[90];
+ __le16 vendor_revision;
+ u8 vendor[88];
__le16 crc;
-} __attribute__((packed));
+} __packed;
#define ONFI_CRC_BASE 0x4F4E
@@ -326,6 +330,26 @@ struct onfi_ext_param_page {
*/
} __packed;
+struct nand_onfi_vendor_micron {
+ u8 two_plane_read;
+ u8 read_cache;
+ u8 read_unique_id;
+ u8 dq_imped;
+ u8 dq_imped_num_settings;
+ u8 dq_imped_feat_addr;
+ u8 rb_pulldown_strength;
+ u8 rb_pulldown_strength_feat_addr;
+ u8 rb_pulldown_strength_num_settings;
+ u8 otp_mode;
+ u8 otp_page_start;
+ u8 otp_data_prot_addr;
+ u8 otp_num_pages;
+ u8 otp_feat_addr;
+ u8 read_retry_options;
+ u8 reserved[72];
+ u8 param_revision;
+} __packed;
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
@@ -432,6 +456,8 @@ struct nand_buffers {
* flash device.
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
+ * @write_byte: [REPLACEABLE] write a single byte to the chip on the
+ * low 8 I/O lines
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
* @select_chip: [REPLACEABLE] select chip nr
@@ -451,6 +477,8 @@ struct nand_buffers {
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
+ * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for
+ * setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
@@ -497,6 +525,7 @@ struct nand_buffers {
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
+ * @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
* @bbt: [INTERN] bad block table pointer
@@ -521,6 +550,7 @@ struct nand_chip {
uint8_t (*read_byte)(struct mtd_info *mtd);
u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
void (*select_chip)(struct mtd_info *mtd, int chip);
@@ -544,6 +574,7 @@ struct nand_chip {
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
+ int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
int chip_delay;
unsigned int options;
@@ -568,6 +599,8 @@ struct nand_chip {
int onfi_version;
struct nand_onfi_params onfi_params;
+ int read_retries;
+
flstate_t state;
uint8_t *oob_poi;
@@ -600,6 +633,8 @@ struct nand_chip {
#define NAND_MFR_AMD 0x01
#define NAND_MFR_MACRONIX 0xc2
#define NAND_MFR_EON 0x92
+#define NAND_MFR_SANDISK 0x45
+#define NAND_MFR_INTEL 0x89
/* The maximum expected count of bytes in the NAND ID sequence */
#define NAND_MAX_ID_LEN 8
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 1f8d24b..6a35e6d 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -37,7 +37,7 @@
*/
struct mtd_partition {
- char *name; /* identifier string */
+ const char *name; /* identifier string */
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
@@ -76,11 +76,11 @@ struct mtd_part_parser {
struct mtd_part_parser_data *);
};
-extern int register_mtd_parser(struct mtd_part_parser *parser);
-extern int deregister_mtd_parser(struct mtd_part_parser *parser);
+extern void register_mtd_parser(struct mtd_part_parser *parser);
+extern void deregister_mtd_parser(struct mtd_part_parser *parser);
int mtd_is_partition(const struct mtd_info *mtd);
-int mtd_add_partition(struct mtd_info *master, char *name,
+int mtd_add_partition(struct mtd_info *master, const char *name,
long long offset, long long length);
int mtd_del_partition(struct mtd_info *master, int partno);
uint64_t mtd_get_device_size(const struct mtd_info *mtd);
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
index 6f10e93..cb32d9c 100644
--- a/include/linux/of_mtd.h
+++ b/include/linux/of_mtd.h
@@ -7,7 +7,7 @@
*/
#ifndef __LINUX_OF_MTD_H
-#define __LINUX_OF_NET_H
+#define __LINUX_OF_MTD_H
#ifdef CONFIG_OF_MTD
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 4da5bfa..3e9dd66 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
* Copyright (C) 2006 Micron Technology Inc.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index ffb8019..a941471 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data {
/* indicate how many chip selects will be used */
int num_cs;
+ /* use an flash-based bad block table */
+ bool flash_bbt;
+
const struct mtd_partition *parts[NUM_CHIP_SELECT];
unsigned int nr_parts[NUM_CHIP_SELECT];
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index e9a9fb1..56ff0e6 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
* Copyright (C) 2006 Nokia Corporation
* Author: Juha Yrjola
*
diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h
index 9f3c180..a7ce77c 100644
--- a/include/linux/platform_data/mtd-orion_nand.h
+++ b/include/linux/platform_data/mtd-orion_nand.h
@@ -1,13 +1,11 @@
/*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
+#ifndef __MTD_ORION_NAND_H
+#define __MTD_ORION_NAND_H
/*
* Device bus NAND private data
OpenPOWER on IntegriCloud