diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-03-22 17:32:09 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-03-22 17:32:09 -0800 |
commit | 591eb85ecd7e6eb8596c6129ae074e16636b99f4 (patch) | |
tree | 535fb7e9bc29113ff62fd70b0dcd8ad197ab51e2 | |
parent | 4658f79bec0b51222e769e328c2923f39f3bda77 (diff) | |
parent | 3a2916aa289504d694072a98876d23ca31d6401e (diff) | |
download | op-kernel-dev-591eb85ecd7e6eb8596c6129ae074e16636b99f4.zip op-kernel-dev-591eb85ecd7e6eb8596c6129ae074e16636b99f4.tar.gz |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
[ARM] 3389/1: typo and grammar fix
[ARM] 3386/1: AT91RM9200 Clock update
[ARM] 3384/1: AT91RM9200: Timer
[ARM] 3382/1: ixp2000: unify defconfigs
[ARM] 3381/1: ixp2000: fix slowport write timing control register fields
[ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
[ARM] 3379/1: ixp2000: use generic 8250 debug macros
[ARM] 3378/1: ixp2000: fix gpio interrupt handling
[ARM] Quieten spurious IRQ detection
[ARM] Use kcalloc to allocate counter_config array rather than kmalloc
[ARM] Oprofile: dynamically allocate counter_config
[ARM] Oprofile: Convert semaphore to mutex
[ARM] 3376/2: S3C2410 - update defconfig
[ARM] 3375/1: S3C2440 - fix osiris machine build
[ARM] 3374/1: ep93xx: gpio interrupt support
[ARM] 3361/1: S3C24XX - add USB bus clock source
[ARM] 3360/1: S3C2440 - add set rate methods and camera clock
[ARM] 3359/1: S3C24XX - add support for clk_set_rate
[ARM] Convert kmalloc+memset to kzalloc
[ARM] 3373/1: move uengine loader to arch/arm/common
...
155 files changed, 3030 insertions, 3920 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 89aa89d..8c6ee68 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -10,6 +10,8 @@ Introduction by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and the S3C2440 are supported CPUs. + Support for the S3C2400 series is in progress. + Configuration ------------- @@ -32,6 +34,11 @@ Machines A general purpose development board, see EB2410ITX.txt for further details + Simtec Electronics IM2440D20 (Osiris) + + CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash + and a PCMCIA controller. + Samsung SMDK2410 Samsung's own development board, geared for PDA work. @@ -85,6 +92,26 @@ Adding New Machines mailing list information. +I2C +--- + + The hardware I2C core in the CPU is supported in single master + mode, and can be configured via platform data. + + +RTC +--- + + Support for the onboard RTC unit, including alarm function. + + +Watchdog +-------- + + The onchip watchdog is available via the standard watchdog + interface. + + NAND ---- @@ -121,6 +148,15 @@ Clock Management various clock units +Suspend to RAM +-------------- + + For boards that provide support for suspend to RAM, the + system can be placed into low power suspend. + + See Suspend.txt for more information. + + Platform Data ------------- @@ -158,6 +194,7 @@ Platform Data exported outside arch/arm/mach-s3c2410/, or exported to modules via EXPORT_SYMBOL() and related functions. + Port Contributors ----------------- @@ -188,8 +225,11 @@ Document Changes 08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction 08 Mar 2005 - BJD - Added section on adding machines 09 Sep 2005 - BJD - Added section on platform data + 11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections + 11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information + Document Author --------------- -Ben Dooks, (c) 2004-2005 Simtec Electronics +Ben Dooks, (c) 2004-2005,2006 Simtec Electronics diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32ba00b..0dd24eb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -108,6 +108,13 @@ config ARCH_EBSA110 Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. +config ARCH_EP93XX + bool "EP93xx-based" + select ARM_AMBA + select ARM_VIC + help + This enables support for the Cirrus EP93xx series of CPUs. + config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE @@ -250,6 +257,8 @@ endchoice source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-ep93xx/Kconfig" + source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -434,6 +443,13 @@ config NO_IDLE_HZ Currently at least OMAP, PXA2xx and SA11x0 platforms are known to have accurate timekeeping with dynamic tick. +config HZ + int + default 128 if ARCH_L7200 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 + default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER + default 100 + config AEABI bool "Use the ARM EABI to compile the kernel" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fbfc14a..b5b1e40 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -105,6 +105,7 @@ endif machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 + machine-$(CONFIG_ARCH_EP93XX) := ep93xx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index c81a2ff..847e3e6 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o +obj-$(CONFIG_ARCH_IXP2000) += uengine.o diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index ad6c89a..7971d0d 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -5,7 +5,7 @@ * limited DMA windows. These functions utilize bounce buffers to * copy data to/from buffers located outside the DMA region. This * only works for systems in which DMA memory is at the bottom of - * RAM and the remainder of memory is at the top an the DMA memory + * RAM, the remainder of memory is at the top and the DMA memory * can be marked as ZONE_DMA. Anything beyond that such as discontigous * DMA windows will require custom implementations that reserve memory * areas at early bootup. diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 2360940..a7dc137 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -60,7 +60,7 @@ struct locomo { unsigned long phys; unsigned int irq; spinlock_t lock; - void *base; + void __iomem *base; }; struct locomo_dev_info { @@ -162,7 +162,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); /* Acknowledge the parent IRQ */ desc->chip->ack(irq); @@ -189,7 +189,7 @@ static void locomo_ack_irq(unsigned int irq) static void locomo_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r &= ~(0x0010 << (irq - LOCOMO_IRQ_START)); @@ -198,7 +198,7 @@ static void locomo_mask_irq(unsigned int irq) static void locomo_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r |= (0x0010 << (irq - LOCOMO_IRQ_START)); @@ -215,7 +215,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { d = irq_desc + LOCOMO_IRQ_KEY_START; @@ -225,7 +225,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, static void locomo_key_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START)); @@ -234,7 +234,7 @@ static void locomo_key_ack_irq(unsigned int irq) static void locomo_key_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -243,7 +243,7 @@ static void locomo_key_mask_irq(unsigned int irq) static void locomo_key_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -261,7 +261,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); req = locomo_readl(mapbase + LOCOMO_GIR) & locomo_readl(mapbase + LOCOMO_GPD) & @@ -280,7 +280,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, static void locomo_gpio_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GWE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -297,7 +297,7 @@ static void locomo_gpio_ack_irq(unsigned int irq) static void locomo_gpio_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -306,7 +306,7 @@ static void locomo_gpio_mask_irq(unsigned int irq) static void locomo_gpio_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -323,7 +323,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { d = irq_desc + LOCOMO_IRQ_LT_START; @@ -333,7 +333,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, static void locomo_lt_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START)); @@ -342,7 +342,7 @@ static void locomo_lt_ack_irq(unsigned int irq) static void locomo_lt_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -351,7 +351,7 @@ static void locomo_lt_mask_irq(unsigned int irq) static void locomo_lt_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -369,7 +369,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F; if (req) { @@ -386,7 +386,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, static void locomo_spi_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIWE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -403,7 +403,7 @@ static void locomo_spi_ack_irq(unsigned int irq) static void locomo_spi_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -412,7 +412,7 @@ static void locomo_spi_mask_irq(unsigned int irq) static void locomo_spi_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIIE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -428,7 +428,7 @@ static struct irqchip locomo_spi_chip = { static void locomo_setup_irq(struct locomo *lchip) { int irq; - void *irqbase = lchip->base; + void __iomem *irqbase = lchip->base; /* * Install handler for IRQ_LOCOMO_HW. @@ -501,12 +501,11 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) struct locomo_dev *dev; int ret; - dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } - memset(dev, 0, sizeof(struct locomo_dev)); strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id)); /* @@ -664,12 +663,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) unsigned long r; int i, ret = -ENODEV; - lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL); + lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL); if (!lchip) return -ENOMEM; - memset(lchip, 0, sizeof(struct locomo)); - spin_lock_init(&lchip->lock); lchip->dev = me; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 93352f6..3f68db8 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/dma-mapping.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -36,10 +37,6 @@ #include <asm/hardware/sa1111.h> -#ifdef CONFIG_ARCH_PXA -#include <asm/arch/pxa-regs.h> -#endif - extern void __init sa1110_mb_enable(void); /* @@ -51,6 +48,7 @@ extern void __init sa1110_mb_enable(void); */ struct sa1111 { struct device *dev; + struct clk *clk; unsigned long phys; int irq; spinlock_t lock; @@ -451,19 +449,7 @@ static void sa1111_wake(struct sa1111 *sachip) spin_lock_irqsave(&sachip->lock, flags); -#ifdef CONFIG_ARCH_SA1100 - /* - * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: - * (SA-1110 Developer's Manual, section 9.1.2.1) - */ - GAFR |= GPIO_32_768kHz; - GPDR |= GPIO_32_768kHz; - TUCR = TUCR_3_6864MHz; -#elif CONFIG_ARCH_PXA - pxa_gpio_mode(GPIO11_3_6MHz_MD); -#else -#error missing clock setup -#endif + clk_enable(sachip->clk); /* * Turn VCO on, and disable PLL Bypass. @@ -555,12 +541,11 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, struct sa1111_dev *dev; int ret; - dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } - memset(dev, 0, sizeof(struct sa1111_dev)); snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "%4.4lx", info->offset); @@ -635,11 +620,15 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) unsigned int has_devs, val; int i, ret = -ENODEV; - sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL); + sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; - memset(sachip, 0, sizeof(struct sa1111)); + sachip->clk = clk_get(me, "GPIO27_CLK"); + if (!sachip->clk) { + ret = PTR_ERR(sachip->clk); + goto err_free; + } spin_lock_init(&sachip->lock); @@ -656,7 +645,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->base = ioremap(mem->start, PAGE_SIZE * 2); if (!sachip->base) { ret = -ENOMEM; - goto out; + goto err_clkput; } /* @@ -666,7 +655,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); ret = -ENODEV; - goto unmap; + goto err_unmap; } printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " @@ -726,9 +715,11 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) return 0; - unmap: + err_unmap: iounmap(sachip->base); - out: + err_clkput: + clk_put(sachip->clk); + err_free: kfree(sachip); return ret; } @@ -751,6 +742,8 @@ static void __sa1111_remove(struct sa1111 *sachip) sa1111_writel(0, irqbase + SA1111_WAKEEN0); sa1111_writel(0, irqbase + SA1111_WAKEEN1); + clk_disable(sachip->clk); + if (sachip->irq != NO_IRQ) { set_irq_chained_handler(sachip->irq, NULL); set_irq_data(sachip->irq, NULL); @@ -759,6 +752,7 @@ static void __sa1111_remove(struct sa1111 *sachip) } iounmap(sachip->base); + clk_put(sachip->clk); kfree(sachip); } @@ -857,6 +851,8 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) sa1111_writel(0, sachip->base + SA1111_SKPWM0); sa1111_writel(0, sachip->base + SA1111_SKPWM1); + clk_disable(sachip->clk); + spin_unlock_irqrestore(&sachip->lock, flags); return 0; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a2dfe0b..5e830f4 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -132,12 +132,10 @@ int __init scoop_probe(struct platform_device *pdev) if (!mem) return -EINVAL; - devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL); - + devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL); if (!devptr) - return -ENOMEM; + return -ENOMEM; - memset(devptr, 0, sizeof(struct scoop_dev)); spin_lock_init(&devptr->scoop_lock); inf = pdev->dev.platform_data; diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/common/uengine.c index ec4e007..a1310b7 100644 --- a/arch/arm/mach-ixp2000/uengine.c +++ b/arch/arm/common/uengine.c @@ -19,7 +19,7 @@ #include <linux/string.h> #include <asm/hardware.h> #include <asm/arch/ixp2000-regs.h> -#include <asm/arch/uengine.h> +#include <asm/hardware/uengine.h> #include <asm/io.h> #define USTORE_ADDRESS 0x000 diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index a45ed16..a19bc4a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,22 +22,21 @@ #include <linux/list.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/hardware/vic.h> -static void __iomem *vic_base; - static void vic_mask_irq(unsigned int irq) { - irq -= IRQ_VIC_START; - writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR); + void __iomem *base = get_irq_chipdata(irq); + irq &= 31; + writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(unsigned int irq) { - irq -= IRQ_VIC_START; - writel(1 << irq, vic_base + VIC_INT_ENABLE); + void __iomem *base = get_irq_chipdata(irq); + irq &= 31; + writel(1 << irq, base + VIC_INT_ENABLE); } static struct irqchip vic_chip = { @@ -46,43 +45,49 @@ static struct irqchip vic_chip = { .unmask = vic_unmask_irq, }; -void __init vic_init(void __iomem *base, u32 vic_sources) +/** + * vic_init - initialise a vectored interrupt controller + * @base: iomem base address + * @irq_start: starting interrupt number, must be muliple of 32 + * @vic_sources: bitmask of interrupt sources to allow + */ +void __init vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources) { unsigned int i; - vic_base = base; - /* Disable all interrupts initially. */ - writel(0, vic_base + VIC_INT_SELECT); - writel(0, vic_base + VIC_INT_ENABLE); - writel(~0, vic_base + VIC_INT_ENABLE_CLEAR); - writel(0, vic_base + VIC_IRQ_STATUS); - writel(0, vic_base + VIC_ITCR); - writel(~0, vic_base + VIC_INT_SOFT_CLEAR); + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_IRQ_STATUS); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); /* * Make sure we clear all existing interrupts */ - writel(0, vic_base + VIC_VECT_ADDR); + writel(0, base + VIC_VECT_ADDR); for (i = 0; i < 19; i++) { unsigned int value; - value = readl(vic_base + VIC_VECT_ADDR); - writel(value, vic_base + VIC_VECT_ADDR); + value = readl(base + VIC_VECT_ADDR); + writel(value, base + VIC_VECT_ADDR); } for (i = 0; i < 16; i++) { - void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4); + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); writel(VIC_VECT_CNTL_ENABLE | i, reg); } - writel(32, vic_base + VIC_DEF_VECT_ADDR); + writel(32, base + VIC_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = IRQ_VIC_START + i; + unsigned int irq = irq_start + i; set_irq_chip(irq, &vic_chip); + set_irq_chipdata(irq, base); if (vic_sources & (1 << i)) { set_irq_handler(irq, do_level_IRQ); diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/ep93xx_defconfig index 5fdaf3c..8dcc8e8 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,11 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:12:48 2005 +# Linux kernel version: 2.6.16 +# Mon Mar 20 14:54:51 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -13,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -25,38 +23,42 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -70,14 +72,14 @@ CONFIG_KMOD=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="deadline" # # System Type @@ -86,11 +88,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y +# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -104,46 +107,44 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +# CONFIG_ARCH_AT91RM9200 is not set # -# Intel IXP2400/2800 Implementation Options +# Cirrus EP93xx Implementation Options # +CONFIG_CRUNCH=y # -# IXP2400/2800 Platforms +# EP93xx Platforms # -CONFIG_ARCH_ENP2611=y -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set +CONFIG_MACH_GESBC9312=y +CONFIG_MACH_TS72XX=y # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y # # Processor Features # -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +CONFIG_ARM_VIC=y # # Bus support # -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set +CONFIG_ARM_AMBA=y # # PCCARD (PCMCIA/CardBus) support @@ -155,6 +156,8 @@ CONFIG_PCI_LEGACY_PROC=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -171,7 +174,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" +CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set # @@ -197,6 +200,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set # # Networking @@ -206,10 +210,13 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -# CONFIG_NET_KEY is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -242,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -259,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -278,21 +289,26 @@ CONFIG_TCP_CONG_BIC=y # Generic Driver Options # CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set @@ -312,7 +328,11 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -323,29 +343,31 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # -# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -362,7 +384,11 @@ CONFIG_MTD_IXP2000=y # # NAND Flash Device Drivers # -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set # # OneNAND Flash Device Drivers @@ -381,19 +407,12 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -401,7 +420,40 @@ CONFIG_BLK_DEV_INITRD=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) @@ -416,28 +468,21 @@ CONFIG_BLK_DEV_INITRD=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # -# CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y -CONFIG_DUMMY=y +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# # PHY device support # # CONFIG_PHYLIB is not set @@ -447,66 +492,20 @@ CONFIG_DUMMY=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set # # Token Ring devices # -# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -516,29 +515,7 @@ CONFIG_EEPRO100=y # # Wan interfaces # -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set +# CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -554,28 +531,7 @@ CONFIG_DLCI_MAX=8 # # Input device support # -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -592,20 +548,18 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL011 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # IPMI @@ -622,23 +576,19 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y # -# PCI-based Watchdog Cards +# USB-based Watchdog Cards # -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set +# CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -663,27 +613,8 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # @@ -691,17 +622,28 @@ CONFIG_I2C_IXP2000=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +CONFIG_I2C_DEBUG_CHIP=y + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -716,6 +658,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -733,10 +676,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -776,14 +717,144 @@ CONFIG_HWMON=y # USB support # CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -797,21 +868,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -830,8 +897,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -843,6 +913,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -911,12 +982,52 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Profiling support @@ -927,13 +1038,14 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y @@ -941,9 +1053,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_WAITQ=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -969,6 +1082,6 @@ CONFIG_DEBUG_LL=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig deleted file mode 100644 index 60d66e8..0000000 --- a/arch/arm/configs/ixdp2401_defconfig +++ /dev/null @@ -1,976 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:50 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -CONFIG_ARCH_IXDP2401=y -# CONFIG_ARCH_IXDP2801 is not set -CONFIG_ARCH_IXDP2X01=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_CS89x0=y -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig deleted file mode 100644 index 4248123..0000000 --- a/arch/arm/configs/ixdp2800_defconfig +++ /dev/null @@ -1,975 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:56 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -CONFIG_ARCH_IXDP2800=y -CONFIG_ARCH_IXDP2X00=y -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig deleted file mode 100644 index f54f3dc..0000000 --- a/arch/arm/configs/ixdp2801_defconfig +++ /dev/null @@ -1,976 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:15:03 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -# CONFIG_ARCH_IXDP2401 is not set -CONFIG_ARCH_IXDP2801=y -CONFIG_ARCH_IXDP2X01=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_CS89x0=y -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixp2000_defconfig index c67fc44..7b02ca0 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -1,11 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:13 2005 +# Linux kernel version: 2.6.16-rc2 +# Wed Feb 8 04:49:11 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -29,27 +28,31 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -104,6 +107,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -113,12 +117,13 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # # IXP2400/2800 Platforms # -# CONFIG_ARCH_ENP2611 is not set +CONFIG_ARCH_ENP2611=y CONFIG_ARCH_IXDP2400=y -# CONFIG_ARCH_IXDP2800 is not set +CONFIG_ARCH_IXDP2800=y CONFIG_ARCH_IXDP2X00=y -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set +CONFIG_ARCH_IXDP2401=y +CONFIG_ARCH_IXDP2801=y +CONFIG_ARCH_IXDP2X01=y # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # @@ -141,7 +146,6 @@ CONFIG_XSCALE_PMU=y # # Bus support # -CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set @@ -156,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -198,6 +203,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +# CONFIG_APM is not set # # Networking @@ -243,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -260,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -284,6 +294,11 @@ CONFIG_STANDALONE=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -331,6 +346,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # CONFIG_MTD_XIP is not set # @@ -466,6 +482,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set +CONFIG_CS89x0=y # CONFIG_DGRS is not set CONFIG_EEPRO100=y # CONFIG_E100 is not set @@ -486,12 +503,14 @@ CONFIG_EEPRO100=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +CONFIG_ENP2611_MSF_NET=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -595,7 +614,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -603,7 +623,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -705,6 +724,12 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -738,6 +763,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -813,6 +839,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -844,6 +871,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -912,6 +940,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -928,12 +957,13 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -942,6 +972,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 6695b07..3cec29d 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Mon Feb 6 11:17:23 2006 +# Linux kernel version: 2.6.16 +# Mon Mar 20 20:36:02 2006 # CONFIG_ARM=y CONFIG_MMU=y @@ -12,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -87,6 +86,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set @@ -111,6 +111,7 @@ CONFIG_ARCH_S3C2410=y # S3C24XX Implementations # CONFIG_MACH_ANUBIS=y +CONFIG_MACH_OSIRIS=y CONFIG_ARCH_BAST=y CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y @@ -175,6 +176,7 @@ CONFIG_ISA=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -230,6 +232,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set @@ -364,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access @@ -431,6 +433,7 @@ CONFIG_PARPORT_1284=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -623,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -686,6 +688,11 @@ CONFIG_S3C2410_WATCHDOG=y # CONFIG_PCWATCHDOG is not set # CONFIG_MIXCOMWD is not set # CONFIG_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_S3C2410_RTC=y @@ -751,6 +758,11 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SPI_MASTER is not set # +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -763,6 +775,7 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -850,16 +863,138 @@ CONFIG_FONT_8x16=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set # # MMC/SD Card support diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index 766b6c0..2bed290 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -357,10 +357,8 @@ static int apm_open(struct inode * inode, struct file * filp) { struct apm_user *as; - as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL); + as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL); if (as) { - memset(as, 0, sizeof(*as)); - /* * XXX - this is a tiny bit broken, when we consider BSD * process accounting. If the device is opened by root, we diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index c4923fa..de606df 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -540,12 +540,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw) int nr, busnr; for (nr = busnr = 0; nr < hw->nr_controllers; nr++) { - sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL); + sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL); if (!sys) panic("PCI: unable to allocate sys data!"); - memset(sys, 0, sizeof(struct pci_sys_data)); - sys->hw = hw; sys->busnr = busnr; sys->swizzle = hw->swizzle; diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index caaa919..da280ba 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -11,7 +11,6 @@ */ #include <linux/config.h> #include <linux/linkage.h> -#include <asm/hardware.h> .text diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 74ea29c..00aa225 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -807,14 +807,12 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) unsigned long base; int i; - ec = kmalloc(sizeof(ecard_t), GFP_KERNEL); + ec = kzalloc(sizeof(ecard_t), GFP_KERNEL); if (!ec) { ec = ERR_PTR(-ENOMEM); goto nomem; } - memset(ec, 0, sizeof(ecard_t)); - ec->slot_no = slot; ec->type = type; ec->irq = NO_IRQ; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index ec48d70..355914f 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -484,7 +484,6 @@ call_fpe: movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) bcs iwmmxt_task_enable #endif - enable_irq add pc, pc, r8, lsr #6 mov r0, r0 @@ -511,6 +510,7 @@ call_fpe: mov pc, lr @ CP#15 (Control) do_fpe: + enable_irq ldr r4, .LCfp add r10, r10, #TI_FPSTATE @ r10 = workspace ldr pc, [r4] @ Call FP module USR entry point diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1aca1775..84277fe 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -28,10 +28,9 @@ #define PROCINFO_INITFUNC 12 #define MACHINFO_TYPE 0 -#define MACHINFO_PHYSRAM 4 -#define MACHINFO_PHYSIO 8 -#define MACHINFO_PGOFFIO 12 -#define MACHINFO_NAME 16 +#define MACHINFO_PHYSIO 4 +#define MACHINFO_PGOFFIO 8 +#define MACHINFO_NAME 12 #define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 1d50d2b..2d5896b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -305,14 +305,19 @@ report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int static int count = 100; struct irqaction *action; - if (!count || noirqdebug) + if (noirqdebug) return; - count--; - if (ret != IRQ_HANDLED && ret != IRQ_NONE) { + if (!count) + return; + count--; printk("irq%u: bogus retval mask %x\n", irq, ret); } else { + desc->irqs_unhandled++; + if (desc->irqs_unhandled <= 99900) + return; + desc->irqs_unhandled = 0; printk("irq%u: nobody cared\n", irq); } show_regs(regs); diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S index b3fb475..9183b06 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay.S @@ -9,28 +9,32 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/param.h> .text .LC0: .word loops_per_jiffy +.LC1: .word (2199023*HZ)>>11 /* - * 0 <= r0 <= 2000 + * r0 <= 2000 + * lpj <= 0x01ffffff (max. 3355 bogomips) + * HZ <= 1000 */ + ENTRY(__udelay) - mov r2, #0x6800 - orr r2, r2, #0x00db + ldr r2, .LC1 mul r0, r2, r0 -ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff +ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 ldr r2, .LC0 - ldr r2, [r2] @ max = 0x0fffffff - mov r0, r0, lsr #11 @ max = 0x00003fff - mov r2, r2, lsr #11 @ max = 0x0003ffff + ldr r2, [r2] @ max = 0x01ffffff + mov r0, r0, lsr #14 @ max = 0x0001ffff + mov r2, r2, lsr #10 @ max = 0x00007fff mul r0, r2, r0 @ max = 2^32-1 movs r0, r0, lsr #6 RETINSTR(moveq,pc,lr) /* - * loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32 + * loops = r0 * HZ * loops_per_jiffy / 1000000 * * Oh, if only we had a cycle counter... */ diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index b153523..1b197ea 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -12,7 +12,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/hardware.h> .text .align diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index ec8195a..8b95467 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -201,6 +201,54 @@ static struct clk ohci_clk = { .pmc_mask = 1 << AT91_ID_UHP, .mode = pmc_periph_mode, }; +static struct clk ether_clk = { + .name = "ether_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_EMAC, + .mode = pmc_periph_mode, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_MCI, + .mode = pmc_periph_mode, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_TWI, + .mode = pmc_periph_mode, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US0, + .mode = pmc_periph_mode, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US1, + .mode = pmc_periph_mode, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US2, + .mode = pmc_periph_mode, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US3, + .mode = pmc_periph_mode, +}; +static struct clk spi_clk = { + .name = "spi0_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_SPI, + .mode = pmc_periph_mode, +}; static struct clk *const clock_list[] = { /* four primary clocks -- MUST BE FIRST! */ @@ -223,15 +271,18 @@ static struct clk *const clock_list[] = { /* MCK and peripherals */ &mck, - // usart0..usart3 - // mmc + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &mmc_clk, &udc_clk, - // i2c - // spi + &twi_clk, + &spi_clk, // ssc0..ssc2 // tc0..tc5 &ohci_clk, - // ether + ðer_clk, }; @@ -360,7 +411,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= 0x03; + pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -440,7 +491,7 @@ static int at91_clk_show(struct seq_file *s, void *unused) else state = ""; - seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n", + seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n", clk->name, clk->users, state, clk_get_rate(clk), clk->parent ? clk->parent->name : ""); } @@ -483,11 +534,18 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) freq *= mul + 1; } else freq = 0; - if (pll == &pllb && (reg & (1 << 28))) - freq /= 2; + return freq; } +static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) +{ + if (pll == &pllb && (reg & AT91_PMC_USB96M)) + return freq / 2; + else + return freq; +} + static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) { unsigned i, div = 0, mul = 0, diff = 1 << 30; @@ -550,8 +608,8 @@ int __init at91_clock_init(unsigned long main_clock) if (!main_clock) { do { tmp = at91_sys_read(AT91_CKGR_MCFR); - } while (!(tmp & 0x10000)); - main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16); + } while (!(tmp & AT91_PMC_MAINRDY)); + main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); } main_clk.rate_hz = main_clock; @@ -566,13 +624,16 @@ int __init at91_clock_init(unsigned long main_clock) * * REVISIT: assumes MCK doesn't derive from PLLB! */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000; + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP)); at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); at91_sys_write(AT91_CKGR_PLLBR, 0); at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + /* * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 0e396fe..5ab4627 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -261,7 +261,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs void __iomem *pio; u32 isr; - pio = (void __force __iomem *) desc->chipdata; + pio = desc->base; /* temporarily mask (level sensitive) parent IRQ */ desc->chip->ack(irq); @@ -312,7 +312,7 @@ void __init at91_gpio_irq_setup(unsigned banks) __raw_writel(~0, controller + PIO_IDR); set_irq_data(id, (void *) pin); - set_irq_chipdata(id, (void __force *) controller); + set_irq_chipdata(id, controller); for (i = 0; i < 32; i++, pin++) { set_irq_chip(pin, &gpio_irqchip); diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c index 1b6dd2d..7ffcf44 100644 --- a/arch/arm/mach-at91rm9200/time.c +++ b/arch/arm/mach-at91rm9200/time.c @@ -71,11 +71,11 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */ write_seqlock(&xtime_lock); - do { + while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) { timer_tick(regs); rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV; at91_sys_write(AT91_ST_RTAR, rtar); - } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH); + } write_sequnlock(&xtime_lock); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig new file mode 100644 index 0000000..cec5a21 --- /dev/null +++ b/arch/arm/mach-ep93xx/Kconfig @@ -0,0 +1,21 @@ +if ARCH_EP93XX + +menu "Cirrus EP93xx Implementation Options" + +comment "EP93xx Platforms" + +config MACH_GESBC9312 + bool "Support Glomation GESBC-9312-sx" + help + Say 'Y' here if you want your kernel to support the Glomation + GESBC-9312-sx board. + +config MACH_TS72XX + bool "Support Technologic Systems TS-72xx SBC" + help + Say 'Y' here if you want your kernel to support the + Technologic Systems TS-72xx board. + +endmenu + +endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile new file mode 100644 index 0000000..5393af9 --- /dev/null +++ b/arch/arm/mach-ep93xx/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o +obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot new file mode 100644 index 0000000..d5561ad --- /dev/null +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c new file mode 100644 index 0000000..865427b --- /dev/null +++ b/arch/arm/mach-ep93xx/core.c @@ -0,0 +1,374 @@ +/* + * arch/arm/mach-ep93xx/core.c + * Core routines for Cirrus EP93xx chips. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * Thanks go to Michael Burian and Ray Lehtiniemi for their key + * role in the ep93xx linux community. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/delay.h> +#include <linux/amba/bus.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> +#include <asm/io.h> + +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + +#include <asm/hardware/vic.h> + + +/************************************************************************* + * Static I/O mappings that are needed for all EP93xx platforms + *************************************************************************/ +static struct map_desc ep93xx_io_desc[] __initdata = { + { + .virtual = EP93XX_AHB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), + .length = EP93XX_AHB_SIZE, + .type = MT_DEVICE, + }, { + .virtual = EP93XX_APB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), + .length = EP93XX_APB_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init ep93xx_map_io(void) +{ + iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); +} + + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick one of the 16 + * bit timers (timer 1) since we don't need more than 16 bits of reload + * value as long as HZ >= 8. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use in gettimeoffset(), while the fact that it can't + * generate interrupts means we don't have to worry about not being able + * to use this timer for something else. We also use timer 4 for keeping + * track of lost jiffies. + */ +static unsigned int last_jiffy_time; + +#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) + +static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + __raw_writel(1, EP93XX_TIMER1_CLEAR); + while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time + >= TIMER4_TICKS_PER_JIFFY) { + last_jiffy_time += TIMER4_TICKS_PER_JIFFY; + timer_tick(regs); + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction ep93xx_timer_irq = { + .name = "ep93xx timer", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ep93xx_timer_interrupt, +}; + +static void __init ep93xx_timer_init(void) +{ + /* Enable periodic HZ timer. */ + __raw_writel(0x48, EP93XX_TIMER1_CONTROL); + __raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD); + __raw_writel(0xc8, EP93XX_TIMER1_CONTROL); + + /* Enable lost jiffy timer. */ + __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH); + + setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); +} + +static unsigned long ep93xx_gettimeoffset(void) +{ + int offset; + + offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; + + /* Calculate (1000000 / 983040) * offset. */ + return offset + (53 * offset / 3072); +} + +struct sys_timer ep93xx_timer = { + .init = ep93xx_timer_init, + .offset = ep93xx_gettimeoffset, +}; + + +/************************************************************************* + * GPIO handling for EP93xx + *************************************************************************/ +static unsigned char gpio_int_enable[2]; +static unsigned char gpio_int_type1[2]; +static unsigned char gpio_int_type2[2]; + +static void update_gpio_ab_int_params(int port) +{ + if (port == 0) { + __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); + __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); + __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); + __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE); + } else if (port == 1) { + __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); + __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); + __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); + __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE); + } +} + + +static unsigned char data_register_offset[8] = { + 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, +}; + +static unsigned char data_direction_register_offset[8] = { + 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, +}; + +void gpio_line_config(int line, int direction) +{ + unsigned int data_direction_register; + unsigned long flags; + unsigned char v; + + data_direction_register = + EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]); + + local_irq_save(flags); + if (direction == GPIO_OUT) { + if (line >= 0 && line < 16) { + gpio_int_enable[line >> 3] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(line >> 3); + } + + v = __raw_readb(data_direction_register); + v |= 1 << (line & 7); + __raw_writeb(v, data_direction_register); + } else if (direction == GPIO_IN) { + v = __raw_readb(data_direction_register); + v &= ~(1 << (line & 7)); + __raw_writeb(v, data_direction_register); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_config); + +int gpio_line_get(int line) +{ + unsigned int data_register; + + data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + + return !!(__raw_readb(data_register) & (1 << (line & 7))); +} +EXPORT_SYMBOL(gpio_line_get); + +void gpio_line_set(int line, int value) +{ + unsigned int data_register; + unsigned long flags; + unsigned char v; + + data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + + local_irq_save(flags); + if (value == EP93XX_GPIO_HIGH) { + v = __raw_readb(data_register); + v |= 1 << (line & 7); + __raw_writeb(v, data_register); + } else if (value == EP93XX_GPIO_LOW) { + v = __raw_readb(data_register); + v &= ~(1 << (line & 7)); + __raw_writeb(v, data_register); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_set); + + +/************************************************************************* + * EP93xx IRQ handling + *************************************************************************/ +static void ep93xx_gpio_ab_irq_handler(unsigned int irq, + struct irqdesc *desc, struct pt_regs *regs) +{ + unsigned char status; + int i; + + status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + desc = irq_desc + IRQ_EP93XX_GPIO(0) + i; + desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs); + } + } + + status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + desc = irq_desc + IRQ_EP93XX_GPIO(8) + i; + desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs); + } + } +} + +static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(port); + + if (line >> 3) { + __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); + } else { + __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); + } +} + +static void ep93xx_gpio_ab_irq_mask(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(port); +} + +static void ep93xx_gpio_ab_irq_unmask(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] |= 1 << (line & 7); + update_gpio_ab_int_params(port); +} + + +/* + * gpio_int_type1 controls whether the interrupt is level (0) or + * edge (1) triggered, while gpio_int_type2 controls whether it + * triggers on low/falling (0) or high/rising (1). + */ +static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type) +{ + int port; + int line; + + line = irq - IRQ_EP93XX_GPIO(0); + gpio_line_config(line, GPIO_IN); + + port = line >> 3; + line &= 7; + + if (type & IRQT_RISING) { + gpio_int_type1[port] |= 1 << line; + gpio_int_type2[port] |= 1 << line; + } else if (type & IRQT_FALLING) { + gpio_int_type1[port] |= 1 << line; + gpio_int_type2[port] &= ~(1 << line); + } else if (type & IRQT_HIGH) { + gpio_int_type1[port] &= ~(1 << line); + gpio_int_type2[port] |= 1 << line; + } else if (type & IRQT_LOW) { + gpio_int_type1[port] &= ~(1 << line); + gpio_int_type2[port] &= ~(1 << line); + } + update_gpio_ab_int_params(port); + + return 0; +} + +static struct irqchip ep93xx_gpio_ab_irq_chip = { + .ack = ep93xx_gpio_ab_irq_mask_ack, + .mask = ep93xx_gpio_ab_irq_mask, + .unmask = ep93xx_gpio_ab_irq_unmask, + .set_type = ep93xx_gpio_ab_irq_type, +}; + + +void __init ep93xx_init_irq(void) +{ + int irq; + + vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); + vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); + + for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) { + set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); +} + + +/************************************************************************* + * EP93xx peripheral handling + *************************************************************************/ +void __init ep93xx_init_devices(void) +{ + unsigned int v; + + /* + * Disallow access to MaverickCrunch initially. + */ + v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); + v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); +} diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c new file mode 100644 index 0000000..d18fcb1 --- /dev/null +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-ep93xx/gesbc9312.c + * Glomation GESBC-9312-sx support. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/mtd/physmap.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static void __init gesbc9312_init_machine(void) +{ + ep93xx_init_devices(); + physmap_configure(0x60000000, 0x00800000, 4, NULL); +} + +MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = gesbc9312_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c new file mode 100644 index 0000000..777e75d --- /dev/null +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-ep93xx/ts72xx.c + * Technologic Systems TS72xx SBC support. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/mtd/physmap.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +static struct map_desc ts72xx_io_desc[] __initdata = { + { + .virtual = TS72XX_MODEL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), + .length = TS72XX_MODEL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_OPTIONS_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), + .length = TS72XX_OPTIONS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_OPTIONS2_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), + .length = TS72XX_OPTIONS2_SIZE, + .type = MT_DEVICE, + } +}; + +static struct map_desc ts72xx_nand_io_desc[] __initdata = { + { + .virtual = TS72XX_NAND_DATA_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE), + .length = TS72XX_NAND_DATA_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE), + .length = TS72XX_NAND_CONTROL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_BUSY_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE), + .length = TS72XX_NAND_BUSY_SIZE, + .type = MT_DEVICE, + } +}; + +static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = { + { + .virtual = TS72XX_NAND_DATA_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE), + .length = TS72XX_NAND_DATA_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE), + .length = TS72XX_NAND_CONTROL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_BUSY_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE), + .length = TS72XX_NAND_BUSY_SIZE, + .type = MT_DEVICE, + } +}; + +static void __init ts72xx_map_io(void) +{ + ep93xx_map_io(); + iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); + + /* + * The TS-7200 has NOR flash, the other models have NAND flash. + */ + if (!board_is_ts7200()) { + if (is_ts9420_installed()) { + iotable_init(ts72xx_alternate_nand_io_desc, + ARRAY_SIZE(ts72xx_alternate_nand_io_desc)); + } else { + iotable_init(ts72xx_nand_io_desc, + ARRAY_SIZE(ts72xx_nand_io_desc)); + } + } +} + +static void __init ts72xx_init_machine(void) +{ + ep93xx_init_devices(); + if (board_is_ts7200()) + physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL); +} + +MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ts72xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = ts72xx_init_machine, +MACHINE_END diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index e79884ee..5dace25 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -255,14 +255,12 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) if (nr || !footbridge_cfn_mode()) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) { printk("out of memory for root bus resources"); return 0; } - memset(res, 0, sizeof(struct resource) * 2); - res[0].flags = IORESOURCE_MEM; res[0].name = "Footbridge non-prefetch"; res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a85d471..92d79fb 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -355,12 +355,11 @@ static int impd1_probe(struct lm_device *dev) if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers")) return -EBUSY; - impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL); + impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL); if (!impd1) { ret = -ENOMEM; goto release_lm; } - memset(impd1, 0, sizeof(struct impd1_module)); impd1->base = ioremap(dev->resource.start, SZ_4K); if (!impd1->base) { @@ -389,12 +388,10 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kmalloc(sizeof(struct amba_device), GFP_KERNEL); + d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); if (!d) continue; - memset(d, 0, sizeof(struct amba_device)); - snprintf(d->dev.bus_id, sizeof(d->dev.bus_id), "lm%x:%5.5lx", dev->id, idev->offset >> 12); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index d8d3c2a..6d65c96 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -319,12 +319,10 @@ static void __init ap_init(void) if ((sc_dec & (16 << i)) == 0) continue; - lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL); + lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); if (!lmdev) continue; - memset(lmdev, 0, sizeof(struct lm_device)); - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; lmdev->resource.end = lmdev->resource.start + 0x0fffffff; lmdev->resource.flags = IORESOURCE_MEM; diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c index c6a973b..f3c6413 100644 --- a/arch/arm/mach-iop3xx/iq31244-pci.c +++ b/arch/arm/mach-iop3xx/iq31244-pci.c @@ -74,12 +74,10 @@ static int iq31244_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP321_PCI_LOWER_IO_VA; res[0].end = IOP321_PCI_UPPER_IO_VA; res[0].name = "IQ31244 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c index 802f6d0..d9758d3 100644 --- a/arch/arm/mach-iop3xx/iq80321-pci.c +++ b/arch/arm/mach-iop3xx/iq80321-pci.c @@ -68,12 +68,10 @@ static int iq80321_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP321_PCI_LOWER_IO_VA; res[0].end = IOP321_PCI_UPPER_IO_VA; res[0].name = "IQ80321 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c index 654e450a..40d8610 100644 --- a/arch/arm/mach-iop3xx/iq80331-pci.c +++ b/arch/arm/mach-iop3xx/iq80331-pci.c @@ -64,12 +64,10 @@ static int iq80331_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP331_PCI_LOWER_IO_VA; res[0].end = IOP331_PCI_UPPER_IO_VA; res[0].name = "IQ80331 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c index 65951ff..afc0676 100644 --- a/arch/arm/mach-iop3xx/iq80332-pci.c +++ b/arch/arm/mach-iop3xx/iq80332-pci.c @@ -70,12 +70,10 @@ static int iq80332_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP331_PCI_LOWER_IO_VA; res[0].end = IOP331_PCI_UPPER_IO_VA; res[0].name = "IQ80332 PCI I/O Space"; diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index ecb58d8..86f53f8 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -43,12 +43,17 @@ config ARCH_IXDP2401 this platform, see <file:Documentation/arm/IXP2000>. config ARCH_IXDP2801 - bool "Support Intel IXDP2801" + bool "Support Intel IXDP2801 and IXDP28x5" help Say 'Y' here if you want your kernel to support the Intel - IXDP2801 reference platform. For more information on + IXDP2801/2805/2855 reference platforms. For more information on this platform, see <file:Documentation/arm/IXP2000>. +config MACH_IXDP28X5 + bool + depends on ARCH_IXDP2801 + default y + config ARCH_IXDP2X01 bool depends on ARCH_IXDP2401 || ARCH_IXDP2801 diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile index 9621aeb..1e6139d 100644 --- a/arch/arm/mach-ixp2000/Makefile +++ b/arch/arm/mach-ixp2000/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o uengine.o +obj-y := core.o pci.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index cfd5bef..6e8d504 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -288,8 +288,6 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { - irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - /* if it's an output, it ain't an interrupt anymore */ GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); @@ -351,11 +349,6 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) GPIO_IRQ_level_high &= ~(1 << line); update_gpio_int_csrs(); - /* - * Finally, mark the corresponding IRQ as valid. - */ - irq_desc[irq].valid = 1; - return 0; } @@ -506,14 +499,10 @@ void __init ixp2000_init_irq(void) } set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); - /* - * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling set_irq_type(). - */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); set_irq_handler(irq, do_level_IRQ); - set_irq_flags(irq, 0); + set_irq_flags(irq, IRQF_VALID); } set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 150519f..f9d4968 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -284,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys) { sys->mem_offset = 0xe0000000; - if (machine_is_ixdp2801()) + if (machine_is_ixdp2801() || machine_is_ixdp28x5()) sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16); return ixp2000_pci_setup(nr, sys); @@ -300,7 +300,8 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - if (machine_is_ixdp2401() || machine_is_ixdp2801()) + if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\ + machine_is_ixdp28x5()) pci_common_init(&ixdp2x01_pci); return 0; @@ -400,6 +401,21 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") .timer = &ixdp2x01_timer, .init_machine = ixdp2x01_init_machine, MACHINE_END + +/* + * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel + * changed the machine ID in the bootloader + */ +MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, + .timer = &ixdp2x01_timer, + .init_machine = ixdp2x01_init_machine, +MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 6e3462e..2d40fe1 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -463,7 +463,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - res = kmalloc(sizeof(*res) * 2, GFP_KERNEL); + res = kzalloc(sizeof(*res) * 2, GFP_KERNEL); if (res == NULL) { /* * If we're out of memory this early, something is wrong, @@ -471,7 +471,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) */ panic("PCI: unable to allocate resources?\n"); } - memset(res, 0, sizeof(*res) * 2); local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fbadf30..a0888e1 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); /* * IRQ -> GPIO mapping table */ -static int irq2gpio[32] = { +static char irq2gpio[32] = { -1, -1, -1, -1, -1, -1, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 2, 3, 4, 5, 6, @@ -153,6 +153,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) /* Set the new style */ *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + /* Configure the line as an input */ + gpio_line_config(line, IXP4XX_GPIO_IN); + return 0; } diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h index 578a524..ea8de7e 100644 --- a/arch/arm/mach-lh7a40x/common.h +++ b/arch/arm/mach-lh7a40x/common.h @@ -12,5 +12,6 @@ extern struct sys_timer lh7a40x_timer; extern void lh7a400_init_irq (void); extern void lh7a404_init_irq (void); +extern void lh7a40x_init_board_irq (void); #define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs) diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c index 691bb09..8535764 100644 --- a/arch/arm/mach-lh7a40x/irq-kev7a400.c +++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c @@ -16,6 +16,7 @@ #include <asm/mach/hardware.h> #include <asm/mach/irqs.h> +#include "common.h" /* KEV7a400 CPLD IRQ handling */ diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c index f334d81..f9fdefe 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a400.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c @@ -16,9 +16,9 @@ #include <asm/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <asm/arch/irq.h> #include <asm/arch/irqs.h> +#include "common.h" /* CPU IRQ handling */ diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c index 122fada..e902e3d 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a404.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c @@ -16,9 +16,10 @@ #include <asm/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <asm/arch/irq.h> #include <asm/arch/irqs.h> +#include "common.h" + #define USE_PRIORITIES /* See Documentation/arm/Sharp-LH/VectoredInterruptController for more diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c index 6262d44..dcb4e17 100644 --- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c @@ -19,6 +19,7 @@ #include <asm/mach/irq.h> #include <asm/arch/irqs.h> +#include "common.h" static void lh7a40x_ack_cpld_irq (u32 irq) { diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 32526a0..3826444 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += generic.o irq.o dma.o time.o +obj-y += clock.o generic.o irq.o dma.o time.o obj-$(CONFIG_PXA25x) += pxa25x.o obj-$(CONFIG_PXA27x) += pxa27x.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c new file mode 100644 index 0000000..8f7c90a --- /dev/null +++ b/arch/arm/mach-pxa/clock.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-sa1100/clock.c + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/spinlock.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/hardware.h> +#include <asm/semaphore.h> + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + unsigned int enabled; + void (*enable)(void); + void (*disable)(void); +}; + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->enable(); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->disable(); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + + +static void clk_gpio27_enable(void) +{ + pxa_gpio_mode(GPIO11_3_6MHz_MD); +} + +static void clk_gpio27_disable(void) +{ +} + +static struct clk clk_gpio27 = { + .name = "GPIO27_CLK", + .rate = 3686400, + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&clk_gpio27); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 7ffd2de..68923b1 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -32,7 +32,6 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/irq.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 911e6ff..b45560a 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -29,7 +29,6 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/irq.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c094d99..30ec317 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -33,7 +33,6 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/irq.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index d168286..66ec717 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,7 +34,6 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/irq.h> #include <asm/arch/tosa.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 0b9d7ca..ed07c41 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -9,6 +9,13 @@ config MACH_ANUBIS Say Y gere if you are using the Simtec Electronics ANUBIS development system +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select CPU_S3C2440 + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 1217bf0..1b3b476 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o # machine specific support obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 08489ef..fec02c9 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -38,12 +38,14 @@ #include <linux/ioport.h> #include <linux/clk.h> #include <linux/mutex.h> +#include <linux/delay.h> #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/arch/regs-clock.h> +#include <asm/arch/regs-gpio.h> #include "clock.h" #include "cpu.h" @@ -51,7 +53,8 @@ /* clock information */ static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); + +DEFINE_MUTEX(clocks_mutex); /* old functions */ @@ -178,12 +181,24 @@ unsigned long clk_get_rate(struct clk *clk) long clk_round_rate(struct clk *clk, unsigned long rate) { + if (!IS_ERR(clk) && clk->round_rate) + return (clk->round_rate)(clk, rate); + return rate; } int clk_set_rate(struct clk *clk, unsigned long rate) { - return -EINVAL; + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = (clk->set_rate)(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; } struct clk *clk_get_parent(struct clk *clk) @@ -191,6 +206,23 @@ struct clk *clk_get_parent(struct clk *clk) return clk->parent; } +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + + if (clk->set_parent) + ret = (clk->set_parent)(clk, parent); + + mutex_unlock(&clocks_mutex); + + return ret; +} + EXPORT_SYMBOL(clk_get); EXPORT_SYMBOL(clk_put); EXPORT_SYMBOL(clk_enable); @@ -199,6 +231,29 @@ EXPORT_SYMBOL(clk_get_rate); EXPORT_SYMBOL(clk_round_rate); EXPORT_SYMBOL(clk_set_rate); EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); + +/* base clock enable */ + +static int s3c24xx_upll_enable(struct clk *clk, int enable) +{ + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long orig = clkslow; + + if (enable) + clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; + else + clkslow |= S3C2410_CLKSLOW_UCLK_OFF; + + __raw_writel(clkslow, S3C2410_CLKSLOW); + + /* if we started the UPLL, then allow to settle */ + + if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF)) + udelay(200); + + return 0; +} /* base clocks */ @@ -210,6 +265,14 @@ static struct clk clk_xtal = { .ctrlbit = 0, }; +static struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .enable = s3c24xx_upll_enable, + .ctrlbit = 0, +}; + static struct clk clk_f = { .name = "fclk", .id = -1, @@ -234,26 +297,124 @@ static struct clk clk_p = { .ctrlbit = 0, }; +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + /* clocks that could be registered by external code */ +static int s3c24xx_dclk_enable(struct clk *clk, int enable) +{ + unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON); + + if (enable) + dclkcon |= clk->ctrlbit; + else + dclkcon &= ~clk->ctrlbit; + + __raw_writel(dclkcon, S3C2410_DCLKCON); + + return 0; +} + +static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long dclkcon; + unsigned int uclk; + + if (parent == &clk_upll) + uclk = 1; + else if (parent == &clk_p) + uclk = 0; + else + return -EINVAL; + + clk->parent = parent; + + dclkcon = __raw_readl(S3C2410_DCLKCON); + + if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; + } else { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; + } + + __raw_writel(dclkcon, S3C2410_DCLKCON); + + return 0; +} + + +static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long mask; + unsigned long source; + + /* calculate the MISCCR setting for the clock */ + + if (parent == &clk_xtal) + source = S3C2410_MISCCR_CLK0_MPLL; + else if (parent == &clk_upll) + source = S3C2410_MISCCR_CLK0_UPLL; + else if (parent == &clk_f) + source = S3C2410_MISCCR_CLK0_FCLK; + else if (parent == &clk_p) + source = S3C2410_MISCCR_CLK0_PCLK; + else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) + source = S3C2410_MISCCR_CLK0_DCLK0; + else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) + source = S3C2410_MISCCR_CLK0_DCLK0; + else + return -EINVAL; + + if (clk == &s3c24xx_dclk0) + mask = S3C2410_MISCCR_CLK0_MASK; + else { + source <<= 4; + mask = S3C2410_MISCCR_CLK1_MASK; + } + + s3c2410_modify_misccr(mask, source); + return 0; +} + +/* external clock definitions */ + struct clk s3c24xx_dclk0 = { .name = "dclk0", .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, }; struct clk s3c24xx_dclk1 = { .name = "dclk1", .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, }; struct clk s3c24xx_clkout0 = { .name = "clkout0", .id = -1, + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", .id = -1, + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_uclk = { @@ -262,7 +423,7 @@ struct clk s3c24xx_uclk = { }; -/* clock definitions */ +/* standard clock definitions */ static struct clk init_clocks[] = { { @@ -374,7 +535,7 @@ int s3c24xx_register_clock(struct clk *clk) /* if this is a standard clock, set the usage state */ - if (clk->ctrlbit) { + if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; @@ -396,6 +557,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, unsigned long hclk, unsigned long pclk) { + unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); struct clk *clkp = init_clocks; int ptr; @@ -406,6 +568,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, /* initialise the main system clocks */ clk_xtal.rate = xtal; + clk_upll.rate = s3c2410_get_pll(upllcon, xtal); clk_h.rate = hclk; clk_p.rate = pclk; @@ -439,6 +602,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_xtal) < 0) printk(KERN_ERR "failed to register master xtal\n"); + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + if (s3c24xx_register_clock(&clk_f) < 0) printk(KERN_ERR "failed to register cpu fclk\n"); @@ -448,6 +614,10 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_p) < 0) printk(KERN_ERR "failed to register cpu pclk\n"); + + if (s3c24xx_register_clock(&clk_usb_bus) < 0) + printk(KERN_ERR "failed to register usb bus clock\n"); + /* register clocks from clock array */ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index eb5c95d..01bb458 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -19,7 +19,11 @@ struct clk { int usage; unsigned long rate; unsigned long ctrlbit; + int (*enable)(struct clk *, int enable); + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); }; /* other clocks which may be registered by board support */ @@ -30,11 +34,15 @@ extern struct clk s3c24xx_clkout0; extern struct clk s3c24xx_clkout1; extern struct clk s3c24xx_uclk; +extern struct clk clk_usb_bus; + /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 */ +extern struct mutex clocks_mutex; + extern int s3c24xx_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c new file mode 100644 index 0000000..ae07875 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-osiris.c @@ -0,0 +1,294 @@ +/* linux/arch/arm/mach-s3c2410/mach-osiris.c + * + * Copyright (c) 2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/osiris-map.h> +#include <asm/arch/osiris-cpld.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/nand.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +/* onboard perihpheral map */ + +static struct map_desc osiris_iodesc[] __initdata = { + /* ISA IO areas (may be over-written later) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers */ + + { + .virtual = (u32)OSIRIS_VA_CTRL1, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = (u32)OSIRIS_VA_CTRL2, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), + .length = SZ_16K, + .type = MT_DEVICE + }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0. + } +}; + + +static struct s3c2410_uartcfg osiris_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = osiris_serial_clocks, + .clocks_size = ARRAY_SIZE(osiris_serial_clocks) + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = osiris_serial_clocks, + .clocks_size = ARRAY_SIZE(osiris_serial_clocks) + }, +}; + +/* NAND Flash on Osiris board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +static struct mtd_partition osiris_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0 + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Osiris has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set osiris_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, +}; + +static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(OSIRIS_VA_CTRL1); + tmp &= ~OSIRIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("osiris_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, OSIRIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand osiris_nand_info = { + .tacls = 25, + .twrph0 = 60, + .twrph1 = 60, + .nr_sets = ARRAY_SIZE(osiris_nand_sets), + .sets = osiris_nand_sets, + .select_chip = osiris_nand_select, +}; + +/* PCMCIA control and configuration */ + +static struct resource osiris_pcmcia_resource[] = { + [0] = { + .start = 0x0f000000, + .end = 0x0f100000, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x0c000000, + .end = 0x0c100000, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device osiris_pcmcia = { + .name = "osiris-pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), + .resource = osiris_pcmcia_resource, +}; + +/* Standard Osiris devices */ + +static struct platform_device *osiris_devices[] __initdata = { + &s3c_device_i2c, + &s3c_device_nand, + &osiris_pcmcia, +}; + +static struct clk *osiris_clocks[] = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c24xx_board osiris_board __initdata = { + .devices = osiris_devices, + .devices_count = ARRAY_SIZE(osiris_devices), + .clocks = osiris_clocks, + .clocks_count = ARRAY_SIZE(osiris_clocks) +}; + +static void __init osiris_map_io(void) +{ + unsigned long flags; + + /* initialise the clocks */ + + s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c_device_nand.dev.platform_data = &osiris_nand_info; + + s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + s3c24xx_set_board(&osiris_board); + + /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ + + local_irq_save(flags); + __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); + local_irq_restore(flags); + + /* write-protect line to the NAND */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); +} + +MACHINE_START(OSIRIS, "Simtec-OSIRIS") + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = osiris_map_io, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index b557a2b..57a1597 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -31,6 +31,7 @@ #include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/mutex.h> #include <linux/clk.h> #include <asm/hardware.h> @@ -45,10 +46,47 @@ /* S3C2440 extended clock support */ -static struct clk s3c2440_clk_upll = { - .name = "upll", - .id = -1, -}; +static unsigned long s3c2440_camif_upll_round(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations for the divisor */ + + div = (parent_rate / rate) / 2; + + if (div < 1) + div = 1; + else if (div > 16) + div = 16; + + return parent_rate / (div * 2); +} + +static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + + rate = s3c2440_camif_upll_round(clk, rate); + + camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); + + if (rate != parent_rate) { + camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; + camdivn |= (((parent_rate / rate) / 2) - 1); + } + + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +/* Extra S3C2440 clocks */ static struct clk s3c2440_clk_cam = { .name = "camif", @@ -57,6 +95,13 @@ static struct clk s3c2440_clk_cam = { .ctrlbit = S3C2440_CLKCON_CAMERA, }; +static struct clk s3c2440_clk_cam_upll = { + .name = "camif-upll", + .id = -1, + .set_rate = s3c2440_camif_upll_setrate, + .round_rate = s3c2440_camif_upll_round, +}; + static struct clk s3c2440_clk_ac97 = { .name = "ac97", .id = -1, @@ -66,38 +111,46 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + unsigned long clkdivn; struct clk *clk_h; struct clk *clk_p; - struct clk *clk_xtal; - - clk_xtal = clk_get(NULL, "xtal"); - if (IS_ERR(clk_xtal)) { - printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n"); - return -EINVAL; - } - - s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); + struct clk *clk_upll; - printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n", - print_mhz(s3c2440_clk_upll.rate), + printk("S3C2440: Clock Support, DVS %s\n", (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clk_p = clk_get(NULL, "pclk"); clk_h = clk_get(NULL, "hclk"); + clk_upll = clk_get(NULL, "upll"); - if (IS_ERR(clk_p) || IS_ERR(clk_h)) { + if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) { printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); return -EINVAL; } + /* check rate of UPLL, and if it is near 96MHz, then change + * to using half the UPLL rate for the system */ + + if (clk_get_rate(clk_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clk_upll) / 2; + + mutex_lock(&clocks_mutex); + + clkdivn = __raw_readl(S3C2410_CLKDIVN); + clkdivn |= S3C2440_CLKDIVN_UCLK; + __raw_writel(camdivn, S3C2410_CLKDIVN); + + mutex_unlock(&clocks_mutex); + } + s3c2440_clk_cam.parent = clk_h; s3c2440_clk_ac97.parent = clk_p; + s3c2440_clk_cam_upll.parent = clk_upll; s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_upll); + s3c24xx_register_clock(&s3c2440_clk_cam_upll); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 10a2976..9d7b799 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -142,6 +142,12 @@ static struct irqaction s3c2410_timer_irq = { .handler = s3c2410_timer_interrupt, }; +#define use_tclk1_12() ( \ + machine_is_bast() || \ + machine_is_vr1000() || \ + machine_is_anubis() || \ + machine_is_osiris() ) + /* * Set up timer interrupt, and return the current time in seconds. * @@ -165,7 +171,7 @@ static void s3c2410_timer_setup (void) /* configure the system for whichever machine is in use */ - if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) { + if (use_tclk1_12()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e4a4a3e..e27f150 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := generic.o irq.o dma.o time.o +obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c new file mode 100644 index 0000000..b1e8fd7 --- /dev/null +++ b/arch/arm/mach-sa1100/clock.c @@ -0,0 +1,132 @@ +/* + * linux/arch/arm/mach-sa1100/clock.c + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/spinlock.h> + +#include <asm/hardware.h> +#include <asm/semaphore.h> + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + unsigned int enabled; + void (*enable)(void); + void (*disable)(void); +}; + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->enable(); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->disable(); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + + +static void clk_gpio27_enable(void) +{ + /* + * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: + * (SA-1110 Developer's Manual, section 9.1.2.1) + */ + GAFR |= GPIO_32_768kHz; + GPDR |= GPIO_32_768kHz; + TUCR = TUCR_3_6864MHz; +} + +static void clk_gpio27_disable(void) +{ + TUCR = 0; + GPDR &= ~GPIO_32_768kHz; + GAFR &= ~GPIO_32_768kHz; +} + +static struct clk clk_gpio27 = { + .name = "GPIO27_CLK", + .rate = 3686400, + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&clk_gpio27); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ebbe80..799697d 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -112,7 +112,7 @@ void __init versatile_init_irq(void) { unsigned int i; - vic_init(VA_VIC_BASE, ~(1 << 31)); + vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31)); set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq); enable_irq(IRQ_VICSOURCE31); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3b79d0e..eaaec90 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,7 +62,7 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 + depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 default y if ARCH_S3C2410 || ARCH_AT91RM9200 select CPU_32v4 select CPU_ABRT_EV4T diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b0321e9..8827912 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -19,7 +19,6 @@ #include <linux/initrd.h> #include <asm/mach-types.h> -#include <asm/hardware.h> #include <asm/setup.h> #include <asm/tlb.h> diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index da9b359..25e0ca3e 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,7 +26,6 @@ #include <linux/vmalloc.h> #include <asm/cacheflush.h> -#include <asm/hardware.h> #include <asm/io.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 82ec954..3aa80094 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -32,7 +32,6 @@ #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/hardware.h> /* * This is the maximum size of an area which will be invalidated diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 7375fe9..767d158 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -32,7 +32,6 @@ #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/hardware.h> /* * This is the maximum size of an area which will be invalidated diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index a13e018..471286f 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -37,7 +37,6 @@ #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/hardware.h> /* * Function: arm720_proc_init (void) diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index d165138..950d3b6 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -30,7 +30,6 @@ #include <asm/assembler.h> #include <asm/pgtable.h> #include <asm/procinfo.h> -#include <asm/hardware.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 23b8ed9..410b032 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -31,7 +31,6 @@ #include <asm/assembler.h> #include <asm/pgtable.h> #include <asm/procinfo.h> -#include <asm/hardware.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ee95c52..6dd2be7 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -53,7 +53,6 @@ #include <asm/assembler.h> #include <asm/pgtable.h> #include <asm/procinfo.h> -#include <asm/hardware.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 7d042dc..022e868 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -30,7 +30,6 @@ #include <asm/assembler.h> #include <asm/pgtable.h> #include <asm/procinfo.h> -#include <asm/hardware.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2d3823e..b50f87a 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -24,7 +24,6 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/procinfo.h> -#include <asm/hardware.h> #include <asm/pgtable.h> #include <asm/page.h> #include <asm/ptrace.h> diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 6f8bc1f..6f83335 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,17 +10,18 @@ #include <linux/init.h> #include <linux/oprofile.h> #include <linux/errno.h> +#include <linux/slab.h> #include <linux/sysdev.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include "op_counter.h" #include "op_arm_model.h" static struct op_arm_model_spec *op_arm_model; static int op_arm_enabled; -static struct semaphore op_arm_sem; +static DEFINE_MUTEX(op_arm_mutex); -struct op_counter_config counter_config[OP_MAX_COUNTER]; +struct op_counter_config *counter_config; static int op_arm_create_files(struct super_block *sb, struct dentry *root) { @@ -28,7 +29,7 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root) for (i = 0; i < op_arm_model->num_counters; i++) { struct dentry *dir; - char buf[2]; + char buf[4]; snprintf(buf, sizeof buf, "%d", i); dir = oprofilefs_mkdir(sb, root, buf); @@ -57,40 +58,40 @@ static int op_arm_start(void) { int ret = -EBUSY; - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (!op_arm_enabled) { ret = op_arm_model->start(); op_arm_enabled = !ret; } - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return ret; } static void op_arm_stop(void) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled) op_arm_model->stop(); op_arm_enabled = 0; - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); } #ifdef CONFIG_PM static int op_arm_suspend(struct sys_device *dev, pm_message_t state) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled) op_arm_model->stop(); - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return 0; } static int op_arm_resume(struct sys_device *dev) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled && op_arm_model->start()) op_arm_enabled = 0; - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return 0; } @@ -135,12 +136,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) #endif if (spec) { - init_MUTEX(&op_arm_sem); - ret = spec->init(); if (ret < 0) return ret; + counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config), + GFP_KERNEL); + if (!counter_config) + return -ENOMEM; + op_arm_model = spec; init_driverfs(); ops->create_files = op_arm_create_files; @@ -162,5 +166,5 @@ void oprofile_arch_exit(void) exit_driverfs(); op_arm_model = NULL; } + kfree(counter_config); } - diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h index 153c1d4..8c5351d 100644 --- a/arch/arm/oprofile/op_counter.h +++ b/arch/arm/oprofile/op_counter.h @@ -24,6 +24,6 @@ struct op_counter_config { unsigned long user; }; -extern struct op_counter_config counter_config[]; +extern struct op_counter_config *counter_config; #endif /* OP_COUNTER_H */ diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 6f17187..9ab1abf 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,6 +22,7 @@ .globl do_vfp do_vfp: + enable_irq ldr r4, .LCvfp add r10, r10, #TI_VFPSTATE @ r10 = workspace ldr pc, [r4] @ call VFP entry point diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index d82651a..6f7dce8 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -16,7 +16,7 @@ #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/moduleparam.h> -#include <asm/arch/uengine.h> +#include <asm/hardware/uengine.h> #include <asm/mach-types.h> #include <asm/io.h> #include "ixpdev.h" diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 09f03f4..77f104a 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -16,7 +16,7 @@ #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/moduleparam.h> -#include <asm/arch/uengine.h> +#include <asm/hardware/uengine.h> #include <asm/mach-types.h> #include <asm/io.h> #include "ixp2400_rx.ucode" diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h deleted file mode 100644 index 139936c..0000000 --- a/include/asm-arm/arch-aaec2000/param.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/param.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_PARAM_H -#define __ASM_ARCH_PARAM_H - -#endif /* __ASM_ARCH_PARAM_H */ - diff --git a/include/asm-arm/arch-at91rm9200/param.h b/include/asm-arm/arch-at91rm9200/param.h deleted file mode 100644 index 9480f84..0000000 --- a/include/asm-arm/arch-at91rm9200/param.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/param.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PARAM_H -#define __ASM_ARCH_PARAM_H - -/* - * We use default params - */ - -#endif diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S index a5d489d..9a2b67d 100644 --- a/include/asm-arm/arch-cl7500/debug-macro.S +++ b/include/asm-arm/arch-cl7500/debug-macro.S @@ -17,15 +17,5 @@ orr \rx, \rx, #0x00000be0 .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx - .endm - - .macro waituart,rd,rx -1001: ldrb \rd, [\rx, #0x14] - tst \rd, #0x20 - beq 1001b - .endm +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-cl7500/param.h b/include/asm-arm/arch-cl7500/param.h deleted file mode 100644 index 974bf69..0000000 --- a/include/asm-arm/arch-cl7500/param.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/param.h - * - * Copyright (C) 1999 Nexus Electronics Ltd - */ diff --git a/include/asm-arm/arch-clps711x/param.h b/include/asm-arm/arch-clps711x/param.h deleted file mode 100644 index 86f6bd2..0000000 --- a/include/asm-arm/arch-clps711x/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/param.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S index dcd03a4..f61cada 100644 --- a/include/asm-arm/arch-ebsa110/debug-macro.S +++ b/include/asm-arm/arch-ebsa110/debug-macro.S @@ -16,19 +16,6 @@ orr \rx, \rx, #0x00000be0 .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #0x14] - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldrb \rd, [\rx, #0x18] - tst \rd, #0x10 - beq 1001b - .endm +#define UART_SHIFT 2 +#define FLOW_CONTROL +#include <asm/hardware/debug-8250.h> diff --git a/include/asm-arm/arch-ebsa110/param.h b/include/asm-arm/arch-ebsa110/param.h deleted file mode 100644 index be19b08..0000000 --- a/include/asm-arm/arch-ebsa110/param.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/param.h - */ -#define HZ 200 diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S index 97d15fc..b48cec4 100644 --- a/include/asm-arm/arch-ebsa285/debug-macro.S +++ b/include/asm-arm/arch-ebsa285/debug-macro.S @@ -23,22 +23,10 @@ orr \rx, \rx, #0x000003f8 .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm +#define UART_SHIFT 0 +#define FLOW_CONTROL +#include <asm/hardware/debug-8250.S> - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #0x5] - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldrb \rd, [\rx, #0x6] - tst \rd, #0x10 - beq 1001b - .endm #else /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 diff --git a/include/asm-arm/arch-ebsa285/param.h b/include/asm-arm/arch-ebsa285/param.h deleted file mode 100644 index 3827103..0000000 --- a/include/asm-arm/arch-ebsa285/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/param.h - */ diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S new file mode 100644 index 0000000..397565a --- /dev/null +++ b/include/asm-arm/arch-ep93xx/debug-macro.S @@ -0,0 +1,22 @@ +/* + * linux/include/asm-arm/arch-ep93xx/debug-macro.S + * Debugging macro include header + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <asm/arch/ep93xx-regs.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base + ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base + orr \rx, \rx, #0x000c0000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h new file mode 100644 index 0000000..898b3ab --- /dev/null +++ b/include/asm-arm/arch-ep93xx/dma.h @@ -0,0 +1,3 @@ +/* + * linux/include/asm-arm/arch-ep93xx/dma.h + */ diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S new file mode 100644 index 0000000..84140a2 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/entry-macro.S @@ -0,0 +1,53 @@ +/* + * linux/include/asm-arm/arch-ep93xx/entry-macro.S + * IRQ demultiplexing for EP93xx + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <asm/arch/ep93xx-regs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =(EP93XX_AHB_VIRT_BASE) + orr \base, \base, #0x000b0000 + mov \irqnr, #0 + ldr \irqstat, [\base] @ lower 32 interrupts + cmp \irqstat, #0 + bne 1001f + + eor \base, \base, #0x00070000 + ldr \irqstat, [\base] @ upper 32 interrupts + cmp \irqstat, #0 + beq 1002f + mov \irqnr, #0x20 + +1001: + movs \tmp, \irqstat, lsl #16 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #16 + + movs \tmp, \irqstat, lsl #8 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #8 + + movs \tmp, \irqstat, lsl #4 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #4 + + movs \tmp, \irqstat, lsl #2 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #2 + + movs \tmp, \irqstat, lsl #1 + addeq \irqnr, \irqnr, #1 + orrs \base, \base, #1 + +1002: + .endm diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h new file mode 100644 index 0000000..71cea0b --- /dev/null +++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h @@ -0,0 +1,125 @@ +/* + * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h + */ + +#ifndef __ASM_ARCH_EP93XX_REGS_H +#define __ASM_ARCH_EP93XX_REGS_H + +/* + * EP93xx linux memory map: + * + * virt phys size + * fe800000 5M per-platform mappings + * fed00000 80800000 2M APB + * fef00000 80000000 1M AHB + */ + +#define EP93XX_AHB_PHYS_BASE 0x80000000 +#define EP93XX_AHB_VIRT_BASE 0xfef00000 +#define EP93XX_AHB_SIZE 0x00100000 + +#define EP93XX_APB_PHYS_BASE 0x80800000 +#define EP93XX_APB_VIRT_BASE 0xfed00000 +#define EP93XX_APB_SIZE 0x00200000 + + +/* AHB peripherals */ +#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) + +#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) + +#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) +#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) + +#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000) + +#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000) + +#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000) + +#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000) + +#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000) + +#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000) + +#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000) + +#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000) + + +/* APB peripherals */ +#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000) +#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) +#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) +#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) +#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) +#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) +#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) +#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) +#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) +#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) +#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) +#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) +#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) +#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) +#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) +#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) + +#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) + +#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) + +#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) +#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) +#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) +#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) +#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) +#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) +#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) +#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) +#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) +#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) +#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) +#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) + +#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) + +#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000) + +#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000) + +#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000) +#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) + +#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000) +#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) + +#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000) +#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) + +#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000) + +#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) +#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) + +#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) + +#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) + +#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) +#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) +#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) +#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 +#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 +#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) +#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) +#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) + +#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) + + +#endif diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h new file mode 100644 index 0000000..4d0b302 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/gesbc9312.h @@ -0,0 +1,3 @@ +/* + * linux/include/asm-arm/arch-ep93xx/gesbc9312.h + */ diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h new file mode 100644 index 0000000..1ee14a1 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -0,0 +1,107 @@ +/* + * linux/include/asm-arm/arch-ep93xx/gpio.h + */ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#define GPIO_IN 0 +#define GPIO_OUT 1 + +#define EP93XX_GPIO_LOW 0 +#define EP93XX_GPIO_HIGH 1 + +extern void gpio_line_config(int line, int direction); +extern int gpio_line_get(int line); +extern void gpio_line_set(int line, int value); + +/* GPIO port A. */ +#define EP93XX_GPIO_LINE_A(x) ((x) + 0) +#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) +#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) +#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) +#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) +#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) +#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) +#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) +#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) + +/* GPIO port B. */ +#define EP93XX_GPIO_LINE_B(x) ((x) + 8) +#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) +#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) +#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) +#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) +#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) +#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) +#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) +#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) + +/* GPIO port C. */ +#define EP93XX_GPIO_LINE_C(x) ((x) + 16) +#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) +#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) +#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) +#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) +#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) +#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) +#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) +#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) + +/* GPIO port D. */ +#define EP93XX_GPIO_LINE_D(x) ((x) + 24) +#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) +#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) +#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) +#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) +#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) +#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) +#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) +#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) + +/* GPIO port E. */ +#define EP93XX_GPIO_LINE_E(x) ((x) + 32) +#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) +#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) +#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) +#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) +#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) +#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) +#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) +#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) + +/* GPIO port F. */ +#define EP93XX_GPIO_LINE_F(x) ((x) + 40) +#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) +#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) +#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) +#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) +#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) +#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) +#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) +#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) + +/* GPIO port G. */ +#define EP93XX_GPIO_LINE_G(x) ((x) + 48) +#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) +#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) +#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) +#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) +#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) +#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) +#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) +#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) + +/* GPIO port H. */ +#define EP93XX_GPIO_LINE_H(x) ((x) + 56) +#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) +#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) +#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) +#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) +#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) +#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) +#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) +#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) + + +#endif diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h new file mode 100644 index 0000000..9b69f45 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/hardware.h @@ -0,0 +1,12 @@ +/* + * linux/include/asm-arm/arch-ep93xx/hardware.h + */ + +#include "ep93xx-regs.h" + +#define pcibios_assign_all_busses() 0 + +#include "platform.h" + +#include "gesbc9312.h" +#include "ts72xx.h" diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h new file mode 100644 index 0000000..7b4d25e --- /dev/null +++ b/include/asm-arm/arch-ep93xx/io.h @@ -0,0 +1,8 @@ +/* + * linux/include/asm-arm/arch-ep93xx/io.h + */ + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(p) ((void __iomem *)(p)) +#define __mem_pci(p) (p) diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h new file mode 100644 index 0000000..9a42f5d --- /dev/null +++ b/include/asm-arm/arch-ep93xx/irqs.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-arm/arch-ep93xx/irqs.h + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define IRQ_EP93XX_COMMRX 2 +#define IRQ_EP93XX_COMMTX 3 +#define IRQ_EP93XX_TIMER1 4 +#define IRQ_EP93XX_TIMER2 5 +#define IRQ_EP93XX_AACINTR 6 +#define IRQ_EP93XX_DMAM2P0 7 +#define IRQ_EP93XX_DMAM2P1 8 +#define IRQ_EP93XX_DMAM2P2 9 +#define IRQ_EP93XX_DMAM2P3 10 +#define IRQ_EP93XX_DMAM2P4 11 +#define IRQ_EP93XX_DMAM2P5 12 +#define IRQ_EP93XX_DMAM2P6 13 +#define IRQ_EP93XX_DMAM2P7 14 +#define IRQ_EP93XX_DMAM2P8 15 +#define IRQ_EP93XX_DMAM2P9 16 +#define IRQ_EP93XX_DMAM2M0 17 +#define IRQ_EP93XX_DMAM2M1 18 +#define IRQ_EP93XX_GPIO0MUX 20 +#define IRQ_EP93XX_GPIO1MUX 21 +#define IRQ_EP93XX_GPIO2MUX 22 +#define IRQ_EP93XX_GPIO3MUX 22 +#define IRQ_EP93XX_UART1RX 23 +#define IRQ_EP93XX_UART1TX 24 +#define IRQ_EP93XX_UART2RX 25 +#define IRQ_EP93XX_UART2TX 26 +#define IRQ_EP93XX_UART3RX 27 +#define IRQ_EP93XX_UART3TX 28 +#define IRQ_EP93XX_KEY 29 +#define IRQ_EP93XX_TOUCH 30 +#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc + +#define IRQ_EP93XX_EXT0 32 +#define IRQ_EP93XX_EXT1 33 +#define IRQ_EP93XX_EXT2 34 +#define IRQ_EP93XX_64HZ 35 +#define IRQ_EP93XX_WATCHDOG 36 +#define IRQ_EP93XX_RTC 37 +#define IRQ_EP93XX_IRDA 38 +#define IRQ_EP93XX_ETHERNET 39 +#define IRQ_EP93XX_EXT3 40 +#define IRQ_EP93XX_PROG 41 +#define IRQ_EP93XX_1HZ 42 +#define IRQ_EP93XX_VSYNC 43 +#define IRQ_EP93XX_VIDEO_FIFO 44 +#define IRQ_EP93XX_SSP1RX 45 +#define IRQ_EP93XX_SSP1TX 46 +#define IRQ_EP93XX_GPIO4MUX 47 +#define IRQ_EP93XX_GPIO5MUX 48 +#define IRQ_EP93XX_GPIO6MUX 49 +#define IRQ_EP93XX_GPIO7MUX 50 +#define IRQ_EP93XX_TIMER3 51 +#define IRQ_EP93XX_UART1 52 +#define IRQ_EP93XX_SSP 53 +#define IRQ_EP93XX_UART2 54 +#define IRQ_EP93XX_UART3 55 +#define IRQ_EP93XX_USB 56 +#define IRQ_EP93XX_ETHERNET_PME 57 +#define IRQ_EP93XX_DSP 58 +#define IRQ_EP93XX_GPIO_AB 59 +#define IRQ_EP93XX_SAI 60 +#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff + +#define IRQ_EP93XX_GPIO(x) (64 + (x)) + +#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16) + +#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) +#define EP93XX_BOARD_IRQS 32 + +#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS) + + +#endif diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h new file mode 100644 index 0000000..4b1a5c7 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/memory.h @@ -0,0 +1,14 @@ +/* + * linux/include/asm-arm/arch-ep93xx/memory.h + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __bus_to_virt(x) __phys_to_virt(x) +#define __virt_to_bus(x) __virt_to_phys(x) + + +#endif diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h new file mode 100644 index 0000000..df9cbb6 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/platform.h @@ -0,0 +1,14 @@ +/* + * linux/include/asm-arm/arch-ep93xx/platform.h + */ + +#ifndef __ASSEMBLY__ + +void ep93xx_map_io(void); +void ep93xx_init_irq(void); +void ep93xx_init_time(unsigned long); +void ep93xx_init_devices(void); +extern struct sys_timer ep93xx_timer; + + +#endif diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h new file mode 100644 index 0000000..79b7185 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/system.h @@ -0,0 +1,26 @@ +/* + * linux/include/asm-arm/arch-ep93xx/system.h + */ + +#include <asm/hardware.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + u32 devicecfg; + + local_irq_disable(); + + devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); + + while (1) + ; +} diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h new file mode 100644 index 0000000..4140bdd --- /dev/null +++ b/include/asm-arm/arch-ep93xx/timex.h @@ -0,0 +1,5 @@ +/* + * linux/include/asm-arm/arch-ep93xx/timex.h + */ + +#define CLOCK_TICK_RATE 983040 diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h new file mode 100644 index 0000000..412215e --- /dev/null +++ b/include/asm-arm/arch-ep93xx/ts72xx.h @@ -0,0 +1,90 @@ +/* + * linux/include/asm-arm/arch-ep93xx/ts72xx.h + */ + +/* + * TS72xx memory map: + * + * virt phys size + * febff000 22000000 4K model number register + * febfe000 22400000 4K options register + * febfd000 22800000 4K options register #2 + * febfc000 [67]0000000 4K NAND data register + * febfb000 [67]0400000 4K NAND control register + * febfa000 [67]0800000 4K NAND busy register + */ + +#define TS72XX_MODEL_PHYS_BASE 0x22000000 +#define TS72XX_MODEL_VIRT_BASE 0xfebff000 +#define TS72XX_MODEL_SIZE 0x00001000 + +#define TS72XX_MODEL_TS7200 0x00 +#define TS72XX_MODEL_TS7250 0x01 +#define TS72XX_MODEL_TS7260 0x02 + + +#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 +#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000 +#define TS72XX_OPTIONS_SIZE 0x00001000 + +#define TS72XX_OPTIONS_COM2_RS485 0x02 +#define TS72XX_OPTIONS_MAX197 0x01 + + +#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 +#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000 +#define TS72XX_OPTIONS2_SIZE 0x00001000 + +#define TS72XX_OPTIONS2_TS9420 0x04 +#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 + + +#define TS72XX_NOR_PHYS_BASE 0x60000000 +#define TS72XX_NOR2_PHYS_BASE 0x62000000 + +#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 +#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 +#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 +#define TS72XX_NAND_DATA_SIZE 0x00001000 + +#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000 +#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000 +#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000 +#define TS72XX_NAND_CONTROL_SIZE 0x00001000 + +#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000 +#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000 +#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000 +#define TS72XX_NAND_BUSY_SIZE 0x00001000 + + +#ifndef __ASSEMBLY__ +#include <asm/io.h> + +static inline int board_is_ts7200(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; +} + +static inline int board_is_ts7250(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; +} + +static inline int board_is_ts7260(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; +} + +static inline int is_max197_installed(void) +{ + return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & + TS72XX_OPTIONS_MAX197); +} + +static inline int is_ts9420_installed(void) +{ + return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & + TS72XX_OPTIONS2_TS9420); +} +#endif diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h new file mode 100644 index 0000000..4410d21 --- /dev/null +++ b/include/asm-arm/arch-ep93xx/uncompress.h @@ -0,0 +1,53 @@ +/* + * linux/include/asm-arm/arch-ep93xx/uncompress.h + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <asm/arch/ep93xx-regs.h> + +static unsigned char __raw_readb(unsigned int ptr) +{ + return *((volatile unsigned char *)ptr); +} + +static void __raw_writeb(unsigned char value, unsigned int ptr) +{ + *((volatile unsigned char *)ptr) = value; +} + + +#define PHYS_UART1_DATA 0x808c0000 +#define PHYS_UART1_FLAG 0x808c0018 +#define UART1_FLAG_TXFF 0x20 + +static __inline__ void putc(char c) +{ + int i; + + for (i = 0; i < 1000; i++) { + /* Transmit fifo not full? */ + if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF)) + break; + } + + __raw_writeb(c, PHYS_UART1_DATA); +} + +static void putstr(const char *s) +{ + while (*s) { + putc(*s); + if (*s == '\n') + putc('\r'); + s++; + } +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h new file mode 100644 index 0000000..205ea6b --- /dev/null +++ b/include/asm-arm/arch-ep93xx/vmalloc.h @@ -0,0 +1,5 @@ +/* + * linux/include/asm-arm/arch-ep93xx/vmalloc.h + */ + +#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-h720x/irq.h b/include/asm-arm/arch-h720x/irq.h deleted file mode 100644 index b3821e9..0000000 --- a/include/asm-arm/arch-h720x/irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-h720x/irq.h - * - * Copyright (C) 2000-2002 Jungjun Kim - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - */ - -#ifndef __ASM_ARCH_IRQ_H -#define __ASM_ARCH_IRQ_H - -extern void __init h720x_init_irq (void); - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-h720x/param.h b/include/asm-arm/arch-h720x/param.h deleted file mode 100644 index 2b80235..0000000 --- a/include/asm-arm/arch-h720x/param.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/param.h - * - * Copyright (C) 2000 Jungjun Kim - */ - -#ifndef __ASM_ARCH_PARAM_H -#define __ASM_ARCH_PARAM_H - -#endif diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h deleted file mode 100644 index 545e065..0000000 --- a/include/asm-arm/arch-imx/irq.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/irq.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define fixup_irq(i) (i) diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h deleted file mode 100644 index 7c724f0..0000000 --- a/include/asm-arm/arch-imx/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S index 031d309..85b327c 100644 --- a/include/asm-arm/arch-integrator/debug-macro.S +++ b/include/asm-arm/arch-integrator/debug-macro.S @@ -11,8 +11,6 @@ * */ -#include <linux/amba/serial.h> - .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -21,18 +19,4 @@ addne \rx, \rx, #0x16000000 >> 4 .endm - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm +#include <asm/hardware/debug-pl01x.S> diff --git a/include/asm-arm/arch-integrator/param.h b/include/asm-arm/arch-integrator/param.h deleted file mode 100644 index afa582f..0000000 --- a/include/asm-arm/arch-integrator/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S index cc15f80..ce007e5 100644 --- a/include/asm-arm/arch-iop3xx/debug-macro.S +++ b/include/asm-arm/arch-iop3xx/debug-macro.S @@ -28,21 +28,8 @@ #endif .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #0x5] - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1002b - .endm - - .macro waituart,rd,rx #if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331) -1001: ldrb \rd, [\rx, #0x6] - tst \rd, #0x10 - beq 1001b +#define FLOW_CONTROL #endif - .endm +#define UART_SHIFT 0 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-iop3xx/param.h b/include/asm-arm/arch-iop3xx/param.h deleted file mode 100644 index acf404e..0000000 --- a/include/asm-arm/arch-iop3xx/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop3xx/param.h - */ diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S index 5631e08..bc8b396 100644 --- a/include/asm-arm/arch-ixp2000/debug-macro.S +++ b/include/asm-arm/arch-ixp2000/debug-macro.S @@ -23,18 +23,5 @@ #endif .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #0x14] - tst \rd, #0x20 - beq 1002b - .endm - - .macro waituart,rd,rx - nop - nop - nop - .endm +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-ixp2000/irq.h b/include/asm-arm/arch-ixp2000/irq.h deleted file mode 100644 index ba00b23..0000000 --- a/include/asm-arm/arch-ixp2000/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/irq.h - * - * Copyright (C) 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define fixup_irq(irq) (irq) - - diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h index 229381c..546e2e8 100644 --- a/include/asm-arm/arch-ixp2000/ixdp2x00.h +++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h @@ -72,12 +72,11 @@ #ifndef __ASSEMBLY__ /* - * Master NPU will always have flash and be PCI master. - * Slave NPU may or may not have flash but will never be PCI master. + * The master NPU is always PCI master. */ static inline unsigned int ixdp2x00_master_npu(void) { - return ((ixp2000_has_flash()) && (ixp2000_is_pcimaster())); + return !!ixp2000_is_pcimaster(); } /* diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 2b57f91..ccae4be 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -353,8 +353,8 @@ * Masks and shifts for various fields in the WTC and RTC registers. */ #define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_SU 0x003c -#define SLOWPORT_WRTC_MASK_PW 0x03c0 +#define SLOWPORT_WRTC_MASK_PW 0x003c +#define SLOWPORT_WRTC_MASK_SU 0x03c0 #define SLOWPORT_WRTC_SHIFT_HD 0x00 #define SLOWPORT_WRTC_SHIFT_SU 0x02 diff --git a/include/asm-arm/arch-ixp2000/param.h b/include/asm-arm/arch-ixp2000/param.h deleted file mode 100644 index 2646d9e..0000000 --- a/include/asm-arm/arch-ixp2000/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/param.h - */ diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h index ddbbb34..3cc9a04 100644 --- a/include/asm-arm/arch-ixp2000/system.h +++ b/include/asm-arm/arch-ixp2000/system.h @@ -37,7 +37,7 @@ static inline void arch_reset(char mode) * to cause a complete reset of the CPU and all external devices * and move the flash bank register back to 0. */ - if (machine_is_ixdp2801()) { + if (machine_is_ixdp2801() || machine_is_ixdp28x5()) { unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S index 2e23651..37bc8ef 100644 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ b/include/asm-arm/arch-ixp4xx/debug-macro.S @@ -20,16 +20,5 @@ @ byte writes used - Big Endian. .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro waituart,rd,rx -1002: ldrb \rd, [\rx, #0x14] - and \rd, \rd, #0x60 @ check THRE and TEMT bits - teq \rd, #0x60 - bne 1002b - .endm - - .macro busyuart,rd,rx - .endm +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-ixp4xx/irq.h b/include/asm-arm/arch-ixp4xx/irq.h deleted file mode 100644 index 87da706..0000000 --- a/include/asm-arm/arch-ixp4xx/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * irq.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define fixup_irq(irq) (irq) - diff --git a/include/asm-arm/arch-ixp4xx/param.h b/include/asm-arm/arch-ixp4xx/param.h deleted file mode 100644 index 8a75712..0000000 --- a/include/asm-arm/arch-ixp4xx/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/param.h - */ diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index daf9790..13aee17 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -38,6 +38,33 @@ extern unsigned long ixp4xx_exp_bus_size; #define IXP4XX_EXP_BUS_BASE(region)\ (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) +#define IXP4XX_EXP_BUS_END(region)\ + (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) + +/* Those macros can be used to adjust timing and configure + * other features for each region. + */ + +#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) +#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) +#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) +#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) +#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) +#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) +#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) + +#define IXP4XX_EXP_BUS_CS_EN (1L << 31) +#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) +#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) +#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) +#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) +#define IXP4XX_EXP_BUS_WR_EN (1L << 1) +#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) + +#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 +#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 +#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 + #define IXP4XX_FLASH_WRITABLE (0x2) #define IXP4XX_FLASH_DEFAULT (0xbcd23c40) #define IXP4XX_FLASH_WRITE (0xbcd23c42) diff --git a/include/asm-arm/arch-l7200/param.h b/include/asm-arm/arch-l7200/param.h deleted file mode 100644 index 9962a12..0000000 --- a/include/asm-arm/arch-l7200/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/param.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * This file contains the hardware definitions for the - * LinkUp Systems L7200 SOC development board. - * - * Changelog: - * 04-21-2000 RS Created L7200 version - * 04-25-2000 SJH Cleaned up file - * 05-03-2000 SJH Change comments and rate - */ - -/* - * See 'time.h' for how the RTC HZ rate is set - */ -#define HZ 128 diff --git a/include/asm-arm/arch-lh7a40x/irq.h b/include/asm-arm/arch-lh7a40x/irq.h deleted file mode 100644 index 0f5f0b1..0000000 --- a/include/asm-arm/arch-lh7a40x/irq.h +++ /dev/null @@ -1,11 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/irq.h - * - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -void __init lh7a40x_init_board_irq (void); diff --git a/include/asm-arm/arch-lh7a40x/param.h b/include/asm-arm/arch-lh7a40x/param.h deleted file mode 100644 index acad0bc..0000000 --- a/include/asm-arm/arch-lh7a40x/param.h +++ /dev/null @@ -1,9 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/param.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h deleted file mode 100644 index face9ad..0000000 --- a/include/asm-arm/arch-omap/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S index b6ec688..9012cbc 100644 --- a/include/asm-arm/arch-pxa/debug-macro.S +++ b/include/asm-arm/arch-pxa/debug-macro.S @@ -21,18 +21,5 @@ orr \rx, \rx, #0x00100000 .endm - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x14] - tst \rd, #(1 << 6) - beq 1002b - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x14] - tst \rd, #(1 << 5) - beq 1001b - .endm +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-pxa/irq.h b/include/asm-arm/arch-pxa/irq.h deleted file mode 100644 index 48c60f5..0000000 --- a/include/asm-arm/arch-pxa/irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/irq.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define fixup_irq(x) (x) - diff --git a/include/asm-arm/arch-pxa/param.h b/include/asm-arm/arch-pxa/param.h deleted file mode 100644 index 3197d82..0000000 --- a/include/asm-arm/arch-pxa/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/param.h - */ diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S index 017ad99..f17efc6 100644 --- a/include/asm-arm/arch-realview/debug-macro.S +++ b/include/asm-arm/arch-realview/debug-macro.S @@ -11,8 +11,6 @@ * */ -#include <linux/amba/serial.h> - .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -21,18 +19,4 @@ orr \rx, \rx, #0x00009000 .endm - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm +#include <asm/hardware/debug-pl01x.S> diff --git a/include/asm-arm/arch-realview/param.h b/include/asm-arm/arch-realview/param.h deleted file mode 100644 index 89b1235..0000000 --- a/include/asm-arm/arch-realview/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/param.h - * - * Copyright (C) 2002 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S index 456d3d7..c634c8d 100644 --- a/include/asm-arm/arch-rpc/debug-macro.S +++ b/include/asm-arm/arch-rpc/debug-macro.S @@ -20,19 +20,6 @@ orr \rx, \rx, #0x00000fe0 .endm - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #0x14] - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1001b - .endm - - .macro waituart,rd,rx -1001: ldrb \rd, [\rx, #0x18] - tst \rd, #0x10 - beq 1001b - .endm +#define UART_SHIFT 2 +#define FLOW_CONTROL +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-rpc/param.h b/include/asm-arm/arch-rpc/param.h deleted file mode 100644 index 721dcd6..0000000 --- a/include/asm-arm/arch-rpc/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/param.h - */ diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h new file mode 100644 index 0000000..e9d1ae1 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/osiris-cpld.h @@ -0,0 +1,25 @@ +/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * OSIRIS - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_OSIRISCPLD_H +#define __ASM_ARCH_OSIRISCPLD_H + +/* CTRL1 - NAND WP control */ + +#define OSIRIS_CTRL1_NANDSEL (0x3) +#define OSIRIS_CTRL1_BOOT_INT (1<<3) +#define OSIRIS_CTRL1_PCMCIA (1<<4) +#define OSIRIS_CTRL1_PCMCIA_nWAIT (1<<6) +#define OSIRIS_CTRL1_PCMCIA_nIOIS16 (1<<7) + +#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h new file mode 100644 index 0000000..7c4b0cd --- /dev/null +++ b/include/asm-arm/arch-s3c2410/osiris-map.h @@ -0,0 +1,41 @@ +/* linux/include/asm-arm/arch-s3c2410/osiris-map.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * OSIRIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: +*/ + +/* needs arch/map.h including with this */ + +#ifndef __ASM_ARCH_OSIRISMAP_H +#define __ASM_ARCH_OSIRISMAP_H + +/* start peripherals off after the S3C2410 */ + +#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x05000000)) + +#define OSIRIS_PA_CPLD (S3C2410_CS1 | (3<<25)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00000000) /* 0x01300000 */ +#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD) + +#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00100000) /* 0x01400000 */ +#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (1<<24)) + +#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00200000) /* 0x01500000 */ +#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<24)) + +#define OSIRIS_VA_CTRL4 OSIRIS_IOADDR(0x00300000) /* 0x01600000 */ +#define OSIRIS_PA_CTRL4 (OSIRIS_PA_CPLD + (3<<24)) + +#endif /* __ASM_ARCH_OSIRISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h deleted file mode 100644 index 483d3f1..0000000 --- a/include/asm-arm/arch-s3c2410/param.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/param.h - * - * (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - Machine parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 02-Sep-2003 BJD Created file - * 12-Mar-2004 BJD Added include protection -*/ - -#ifndef __ASM_ARCH_PARAM_H -#define __ASM_ARCH_PARAM_H - -/* we cannot get our timer down to 100Hz with the setup as is, but we can - * manage 200 clock ticks per second... if this is a problem, we can always - * add a software pre-scaler to the evil timer systems. -*/ - -#define HZ 200 - -#endif /* __ASM_ARCH_PARAM_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 9697f93..d257408 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -979,6 +979,7 @@ #define S3C2410_MISCCR_CLK0_HCLK (3<<4) #define S3C2410_MISCCR_CLK0_PCLK (4<<4) #define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) +#define S3C2410_MISCCR_CLK0_MASK (7<<4) #define S3C2410_MISCCR_CLK1_MPLL (0<<8) #define S3C2410_MISCCR_CLK1_UPLL (1<<8) @@ -986,6 +987,7 @@ #define S3C2410_MISCCR_CLK1_HCLK (3<<8) #define S3C2410_MISCCR_CLK1_PCLK (4<<8) #define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) +#define S3C2410_MISCCR_CLK1_MASK (7<<8) #define S3C2410_MISCCR_USBSUSPND0 (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S index 755fa34..267c317 100644 --- a/include/asm-arm/arch-sa1100/debug-macro.S +++ b/include/asm-arm/arch-sa1100/debug-macro.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#include <asm/hardware.h> .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-sa1100/param.h b/include/asm-arm/arch-sa1100/param.h deleted file mode 100644 index 8674889..0000000 --- a/include/asm-arm/arch-sa1100/param.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/param.h - */ diff --git a/include/asm-arm/arch-shark/param.h b/include/asm-arm/arch-shark/param.h deleted file mode 100644 index 997eeb7..0000000 --- a/include/asm-arm/arch-shark/param.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/param.h - * - * by Alexander Schulz - */ diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S index ef61671..fe106d1 100644 --- a/include/asm-arm/arch-versatile/debug-macro.S +++ b/include/asm-arm/arch-versatile/debug-macro.S @@ -11,8 +11,6 @@ * */ -#include <linux/amba/serial.h> - .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -22,18 +20,4 @@ orr \rx, \rx, #0x00001000 .endm - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm +#include <asm/hardware/debug-pl01x.S> diff --git a/include/asm-arm/arch-versatile/param.h b/include/asm-arm/arch-versatile/param.h deleted file mode 100644 index 34b8973..0000000 --- a/include/asm-arm/arch-versatile/param.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/param.h - * - * Copyright (C) 2002 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h index 1704360..b2deda1 100644 --- a/include/asm-arm/delay.h +++ b/include/asm-arm/delay.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_DELAY_H #define __ASM_ARM_DELAY_H +#include <asm/param.h> /* HZ */ + extern void __delay(int loops); /* @@ -13,7 +15,7 @@ extern void __delay(int loops); * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay - * of 2000us and 671 bogomips + * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); @@ -32,10 +34,10 @@ extern void __const_udelay(unsigned long); #define MAX_UDELAY_MS 2 -#define udelay(n) \ - (__builtin_constant_p(n) ? \ - ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * 0x68dbul)) : \ +#define udelay(n) \ + (__builtin_constant_p(n) ? \ + ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ + __const_udelay((n) * ((2199023U*HZ)>>11))) : \ __udelay(n)) #endif /* defined(_ARM_DELAY_H) */ diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S new file mode 100644 index 0000000..4594fea --- /dev/null +++ b/include/asm-arm/hardware/debug-8250.S @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/hardware/debug-8250.h + * + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + strb \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S new file mode 100644 index 0000000..db0d0f7 --- /dev/null +++ b/include/asm-arm/hardware/debug-pl01x.S @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/arch-integrator/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ +#include <linux/amba/serial.h> + + .macro senduart,rd,rx + strb \rd, [\rx, #UART01x_DR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_TXFF + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_BUSY + bne 1001b + .endm diff --git a/include/asm-arm/arch-ixp2000/uengine.h b/include/asm-arm/hardware/uengine.h index b442d65..b442d65 100644 --- a/include/asm-arm/arch-ixp2000/uengine.h +++ b/include/asm-arm/hardware/uengine.h diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h index 81825eb..ed9ca37 100644 --- a/include/asm-arm/hardware/vic.h +++ b/include/asm-arm/hardware/vic.h @@ -39,7 +39,7 @@ #define VIC_VECT_CNTL_ENABLE (1 << 5) #ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, u32 vic_sources); +void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); #endif #endif diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index 2cd57b4..fd2f9bf 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -10,19 +10,16 @@ #ifndef __ASSEMBLY__ -#include <linux/compiler.h> - struct tag; struct meminfo; struct sys_timer; struct machine_desc { /* - * Note! The first five elements are used + * Note! The first four elements are used * by assembler code in head-armv.S */ unsigned int nr; /* architecture number */ - unsigned int __deprecated phys_ram; /* start of physical ram */ unsigned int phys_io; /* start of physical io */ unsigned int io_pg_offst; /* byte offset for io * page tabe entry */ diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h index 0ce6ca5..d4d420e 100644 --- a/include/asm-arm/mach/irq.h +++ b/include/asm-arm/mach/irq.h @@ -61,7 +61,7 @@ struct irqdesc { struct irqchip *chip; struct irqaction *action; struct list_head pend; - void *chipdata; + void __iomem *base; void *data; unsigned int disable_depth; @@ -74,6 +74,7 @@ struct irqdesc { unsigned int noautoenable : 1; /* don't automatically enable IRQ */ unsigned int unused :25; + unsigned int irqs_unhandled; struct proc_dir_entry *procdir; #ifdef CONFIG_SMP @@ -113,8 +114,8 @@ void __set_irq_handler(unsigned int irq, irq_handler_t, int); #define set_irq_handler(irq,handler) __set_irq_handler(irq,handler,0) #define set_irq_chained_handler(irq,handler) __set_irq_handler(irq,handler,1) #define set_irq_data(irq,d) do { irq_desc[irq].data = d; } while (0) -#define set_irq_chipdata(irq,d) do { irq_desc[irq].chipdata = d; } while (0) -#define get_irq_chipdata(irq) (irq_desc[irq].chipdata) +#define set_irq_chipdata(irq,d) do { irq_desc[irq].base = d; } while (0) +#define get_irq_chipdata(irq) (irq_desc[irq].base) void set_irq_chip(unsigned int irq, struct irqchip *); void set_irq_flags(unsigned int irq, unsigned int flags); diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h index 94223d4d..1580646 100644 --- a/include/asm-arm/param.h +++ b/include/asm-arm/param.h @@ -11,12 +11,7 @@ #define __ASM_PARAM_H #ifdef __KERNEL__ -# include <asm/arch/param.h> /* for kernel version of HZ */ - -# ifndef HZ -# define HZ 100 /* Internal kernel timer frequency */ -# endif - +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ # define USER_HZ 100 /* User interfaces are in "ticks" */ # define CLOCKS_PER_SEC (USER_HZ) /* like times() */ #else |