diff options
| author | Jim Lin <jilin@nvidia.com> | 2014-05-14 17:32:57 -0700 |
|---|---|---|
| committer | Mike Turquette <mturquette@linaro.org> | 2014-05-22 22:14:51 -0700 |
| commit | 2cfe16748bec853cb6b83d19546dfd226898b222 (patch) | |
| tree | b9fccdbca9baeafb46a3bbe2a24c7366156d46f9 | |
| parent | c675a00c2d666c8e90da335eafbbae81201d53f7 (diff) | |
| download | op-kernel-dev-2cfe16748bec853cb6b83d19546dfd226898b222.zip op-kernel-dev-2cfe16748bec853cb6b83d19546dfd226898b222.tar.gz | |
clk: tegra: Enable hardware control of PLLE
Enable hardware control of PLLE spread-spectrum, IDDQ, and enable
controls when enabling PLLE. The hardware (e.g. XUSB) using PLLE
will use these controls for power-saving optimizations.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
| -rw-r--r-- | drivers/clk/tegra/clk-pll.c | 33 |
1 files changed, 32 insertions, 1 deletions
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index e1769ad..39e0959 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -96,10 +96,20 @@ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL) #define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_USE_LOCKDET BIT(3) #define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SS_SWCTL BIT(6) #define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_SEQ_START_STATE BIT(25) #define PLLE_AUX_PLLRE_SEL BIT(28) +#define XUSBIO_PLL_CFG0 0x51c +#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) +#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6) +#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24) +#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25) + #define PLLE_MISC_PLLE_PTS BIT(8) #define PLLE_MISC_IDDQ_SW_VALUE BIT(13) #define PLLE_MISC_IDDQ_SW_CTRL BIT(14) @@ -1318,7 +1328,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) pll_writel(val, PLLE_SS_CTRL, pll); udelay(1); - /* TODO: enable hw control of xusb brick pll */ + /* Enable hw control of xusb brick pll */ + val = pll_readl_misc(pll); + val &= ~PLLE_MISC_IDDQ_SW_CTRL; + pll_writel_misc(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE); + val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL); + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + val |= PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + + val = pll_readl(XUSBIO_PLL_CFG0, pll); + val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET | + XUSBIO_PLL_CFG0_SEQ_START_STATE); + val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL | + XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL); + pll_writel(val, XUSBIO_PLL_CFG0, pll); + udelay(1); + val |= XUSBIO_PLL_CFG0_SEQ_ENABLE; + pll_writel(val, XUSBIO_PLL_CFG0, pll); out: if (pll->lock) |
