Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc

* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits)
  ARM: mmp: register internal sram bank
  ARM: mmp: register audio sram bank
  ARM: mmp: add sram allocator
  gpio/samsung: Complain loudly if we don't know the SoC
  ARM: S3C64XX: Fix SoC identification for S3C64xx devices
  ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks
  ARM: S3C24XX: Add devname for hsmmc1 pclk
  ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks
  ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv
  ARM: S3C2443: handle unset armdiv values gracefully
  ARM: S3C2443: Add get_rate operation for clk_armdiv
  ARM: S3C2416: Add comment describing the armdiv/armclk
  ARM: S3C2443: Move clk_arm and clk_armdiv to common code
  ARM: S3C24XX: Add infrastructure to transmit armdiv to common code
  ARM: S3C2416: Add armdiv_mask constant
  ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
  ARM: EXYNOS4: Enable MFC on ORIGEN
  ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450
  ARM: SAMSUNG: Add support s3c2443-adc for S3C2443
  ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX
  ...

23 files changed, 651 insertions, 153 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e17fe25..2bda424 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -595,6 +595,7 @@ config ARCH_MMP
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
+	select GENERIC_ALLOCATOR
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -769,6 +770,7 @@ config ARCH_S3C64XX
 	select CPU_V6
 	select ARM_VIC
 	select HAVE_CLK
+	select HAVE_TCM
 	select CLKDEV_LOOKUP
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 59299ea..51cff04 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -217,6 +217,7 @@ config MACH_UNIVERSAL_C210
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
+	select S5P_GPIO_INT
 	select S3C_DEV_WDT
 	select S3C_DEV_RTC
 	select S5P_DEV_FIMD0
@@ -226,15 +227,23 @@ config MACH_NURI
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S5P_SETUP_MIPIPHY
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
 	help
@@ -253,11 +262,12 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC3
 	select S5P_DEV_FIMD0
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
-	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 2204911..236bbe1 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -27,6 +27,9 @@
 #include <linux/pwm_backlight.h>
 
 #include <video/platform_lcd.h>
+#include <media/m5mols.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -45,6 +48,9 @@
 #include <plat/iic.h>
 #include <plat/mfc.h>
 #include <plat/pd.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
@@ -65,6 +71,8 @@
 enum fixed_regulator_id {
 	FIXED_REG_ID_MMC = 0,
 	FIXED_REG_ID_MAX8903,
+	FIXED_REG_ID_CAM_A28V,
+	FIXED_REG_ID_CAM_12V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -1066,13 +1074,6 @@ static struct platform_device nuri_max8903_device = {
 	},
 };
 
-static struct device *nuri_cm_devices[] = {
-	&s3c_device_i2c5.dev,
-	&s3c_device_adc.dev,
-	NULL, /* Reserved for UART */
-	NULL,
-};
-
 static void __init nuri_power_init(void)
 {
 	int gpio;
@@ -1117,10 +1118,140 @@ static void __init nuri_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* CAMERA */
+static struct regulator_consumer_supply cam_vdda_supply[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data cam_vdda_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
+	.consumer_supplies = cam_vdda_supply,
+};
+
+static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
+	.supply_name	= "CAM_IO_EN",
+	.microvolts	= 2800000,
+	.gpio		= EXYNOS4_GPE2(1), /* CAM_IO_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_vdda_reg_init_data,
+};
+
+static struct platform_device cam_vdda_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
+	.dev = { .platform_data	= &cam_vdda_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply camera_8m_12v_supply =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data cam_8m_12v_reg_init_data = {
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &camera_8m_12v_supply,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS
+	},
+};
+
+static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
+	.supply_name	= "8M_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_8m_12v_reg_init_data,
+};
+
+static struct platform_device cam_8m_12v_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
+	.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset = GPIO_CAM_MEGA_RST,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data	= &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
+	{
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.clk_frequency	= 24000000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= nuri_camera_sensors,
+	.num_clients	= ARRAY_SIZE(nuri_camera_sensors),
+};
+
+static struct gpio nuri_camera_gpios[] = {
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void nuri_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(nuri_camera_gpios,
+			       ARRAY_SIZE(nuri_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
+	if (!IS_ERR_VALUE(m5mols_board_info.irq))
+		s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
+	else
+		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_RST);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
+		pr_err("%s: Camera port A setup failed\n", __func__);
+		return;
+	}
+	/* Increase drive strength of the sensor clock output */
+	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
+static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
+	.frequency	= 400000U,
+	.sda_delay	= 200,
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
+	&s3c_device_i2c0,
 	&emmc_fixed_voltage,
+	&s5p_device_mipi_csis0,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
@@ -1137,6 +1268,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&s5p_device_fimc_md,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1144,6 +1277,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&nuri_backlight_device,
 	&max8903_fixed_reg_dev,
 	&nuri_max8903_device,
+	&cam_vdda_fixed_rdev,
+	&cam_8m_12v_fixed_rdev,
 };
 
 static void __init nuri_map_io(void)
@@ -1164,6 +1299,7 @@ static void __init nuri_machine_init(void)
 	nuri_tsp_init();
 	nuri_power_init();
 
+	s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 	s3c_i2c3_set_platdata(&i2c3_data);
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
@@ -1175,6 +1311,8 @@ static void __init nuri_machine_init(void)
 
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
 
+	nuri_camera_init();
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
@@ -1182,6 +1320,12 @@ static void __init nuri_machine_init(void)
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 71db848..f80b563 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -39,6 +39,7 @@
 #include <plat/backlight.h>
 #include <plat/pd.h>
 #include <plat/fb.h>
+#include <plat/mfc.h>
 
 #include <mach/map.h>
 
@@ -89,6 +90,8 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 
 static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
 	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
@@ -98,6 +101,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
 };
 static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
 	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
 	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
@@ -598,9 +602,17 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimd0,
 	&s5p_device_hdmi,
 	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&s5p_device_mixer,
 	&exynos4_device_pd[PD_LCD0],
 	&exynos4_device_pd[PD_TV],
+	&exynos4_device_pd[PD_G3D],
+	&exynos4_device_pd[PD_LCD1],
+	&exynos4_device_pd[PD_CAM],
+	&exynos4_device_pd[PD_GPS],
+	&exynos4_device_pd[PD_MFC],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
 };
@@ -638,6 +650,11 @@ static void __init origen_power_init(void)
 	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
 }
 
+static void __init origen_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init origen_machine_init(void)
 {
 	origen_power_init();
@@ -661,11 +678,14 @@ static void __init origen_machine_init(void)
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 
 	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
 	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
 
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
@@ -676,4 +696,5 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &origen_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8f948f9..ba254a7 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -7,7 +7,7 @@ obj-y				+= common.o clock.o devices.o time.o
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
 obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index e411252..983cfb1 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -185,6 +185,15 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
 		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
 };
 
+static struct sram_platdata mmp2_asram_platdata = {
+	.pool_name	= "asram",
+	.granularity	= SRAM_GRANULARITY,
+};
+
+static struct sram_platdata mmp2_isram_platdata = {
+	.pool_name	= "isram",
+	.granularity	= SRAM_GRANULARITY,
+};
 
 static void __init brownstone_init(void)
 {
@@ -196,6 +205,8 @@ static void __init brownstone_init(void)
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+	mmp2_add_asram(&mmp2_asram_platdata);
+	mmp2_add_isram(&mmp2_isram_platdata);
 
 	/* enable 5v regulator */
 	platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index de7b888..2f7b2d3 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,6 +13,7 @@ extern void mmp2_clear_pmic_int(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
+#include <mach/sram.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
@@ -28,6 +29,8 @@ extern struct pxa_device_desc mmp2_device_sdh0;
 extern struct pxa_device_desc mmp2_device_sdh1;
 extern struct pxa_device_desc mmp2_device_sdh2;
 extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct pxa_device_desc mmp2_device_asram;
+extern struct pxa_device_desc mmp2_device_isram;
 
 static inline int mmp2_add_uart(int id)
 {
@@ -85,5 +88,15 @@ static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
 	return pxa_register_device(d, data, sizeof(*data));
 }
 
+static inline int mmp2_add_asram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+}
+
+static inline int mmp2_add_isram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_MMP2_H */
 
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
new file mode 100644
index 0000000..239e0fc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/sram.h
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ *  SRAM Memory Management
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+enum sram_type {
+	MMP_SRAM_UNDEFINED = 0,
+	MMP_ASRAM,
+	MMP_ISRAM,
+};
+
+struct sram_platdata {
+	char *pool_name;
+	int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 7a7e8e4..5dd1d4a 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -226,4 +226,7 @@ MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
 MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
 MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
 MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
+/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
+MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
 
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
new file mode 100644
index 0000000..4304f95
--- /dev/null
+++ b/arch/arm/mach-mmp/sram.c
@@ -0,0 +1,168 @@
+/*
+ *  linux/arch/arm/mach-mmp/sram.c
+ *
+ *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *  All Rights Reserved
+ *
+ *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+	char *pool_name;
+	struct gen_pool *gpool;
+	int granularity;
+
+	phys_addr_t sram_phys;
+	void __iomem *sram_virt;
+	u32 sram_size;
+
+	struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+	struct sram_bank_info *info = NULL;
+
+	if (!pool_name)
+		return NULL;
+
+	mutex_lock(&sram_lock);
+
+	list_for_each_entry(info, &sram_bank_list, node)
+		if (!strcmp(pool_name, info->pool_name))
+			break;
+
+	mutex_unlock(&sram_lock);
+
+	if (&info->node == &sram_bank_list)
+		return NULL;
+
+	return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+	struct sram_platdata *pdata = pdev->dev.platform_data;
+	struct sram_bank_info *info;
+	struct resource *res;
+	int ret = 0;
+
+	if (!pdata && !pdata->pool_name)
+		return -ENODEV;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (!resource_size(res))
+		return 0;
+
+	info->sram_phys   = (phys_addr_t)res->start;
+	info->sram_size   = resource_size(res);
+	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
+	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
+	info->granularity = pdata->granularity;
+
+	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+	if (!info->gpool) {
+		dev_err(&pdev->dev, "create pool failed\n");
+		ret = -ENOMEM;
+		goto create_pool_err;
+	}
+
+	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+				info->sram_phys, info->sram_size, -1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "add new chunk failed\n");
+		ret = -ENOMEM;
+		goto add_chunk_err;
+	}
+
+	mutex_lock(&sram_lock);
+	list_add(&info->node, &sram_bank_list);
+	mutex_unlock(&sram_lock);
+
+	platform_set_drvdata(pdev, info);
+
+	dev_info(&pdev->dev, "initialized\n");
+	return 0;
+
+add_chunk_err:
+	gen_pool_destroy(info->gpool);
+create_pool_err:
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+	struct sram_bank_info *info;
+
+	info = platform_get_drvdata(pdev);
+	if (info == NULL)
+		return -ENODEV;
+
+	mutex_lock(&sram_lock);
+	list_del(&info->node);
+	mutex_unlock(&sram_lock);
+
+	gen_pool_destroy(info->gpool);
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+	kfree(info);
+	return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+	{ "asram", MMP_ASRAM },
+	{ "isram", MMP_ISRAM },
+	{ }
+};
+
+static struct platform_driver sram_driver = {
+	.probe		= sram_probe,
+	.remove		= sram_remove,
+	.driver		= {
+		.name	= "mmp-sram",
+	},
+	.id_table	= sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+	return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 4f7bf32..019ea86 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -53,7 +53,7 @@
 #define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
 
 #if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
 #endif
 
 #define S3C2410_GPIO_NEXT(__gpio) \
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index df6434f..c3feff3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -65,6 +65,7 @@
 #define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
 #define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
 
+#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
 #define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
 #define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
 #define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 72b7c62..afbbe8b 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -28,6 +28,14 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-s3c2443-clock.h>
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
+*/
+
 static unsigned int armdiv[8] = {
 	[0] = 1,
 	[1] = 2,
@@ -125,16 +133,9 @@ static struct clk hsmmc0_clk = {
 	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
 };
 
-static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
 void __init_or_cpufreq s3c2416_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_setup_clocks(s3c2416_get_pll);
 }
 
 
@@ -158,7 +159,9 @@ void __init s3c2416_init_clocks(int xtal)
 
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2416_CLKDIV0_ARMDIV_MASK);
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 7dbee81..ee214bc 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -60,6 +60,7 @@
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -97,6 +98,8 @@ int __init s3c2416_init(void)
 
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2416-adc");
+
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 #endif
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index cd51d04..1c2c088 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -61,10 +61,10 @@
  *
  * this clock is sourced from msysclk and can have a number of
  * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
 */
 
-/* armdiv divisor table */
-
 static unsigned int armdiv[16] = {
 	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
 	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
@@ -76,92 +76,6 @@ static unsigned int armdiv[16] = {
 	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
 };
 
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best)
-			best = div;
-	}
-
-	return parent / best;
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best) {
-			best = div;
-			val = ptr;
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -254,25 +168,20 @@ static struct clk init_clocks_off[] = {
 	}
 };
 
-static struct clk init_clocks[] = {
-};
-
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_arm,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };
 
 static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
-	&clk_armdiv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll);
 }
 
 void __init s3c2443_init_clocks(int xtal)
@@ -283,7 +192,9 @@ void __init s3c2443_init_clocks(int xtal)
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2443_CLKDIV0_ARMDIV_MASK);
 
 	s3c2443_setup_clocks();
 
@@ -292,10 +203,6 @@ void __init s3c2443_init_clocks(int xtal)
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
-	/* register clocks from clock array */
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
 	 * their own DMA requests to the bus can cause the system to lockup
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 5df6458..a22b771 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
 #include <plat/cpu.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -70,6 +71,8 @@ int __init s3c2443_init(void)
 	s3c_nand_setname("s3c2412-nand");
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2443-adc");
+
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 07a4c81..5a21b15 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -160,6 +160,124 @@ static struct clk clk_prediv = {
 	},
 };
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static unsigned int *armdiv;
+static int nr_armdiv;
+static int armdivmask;
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
+
+	if (!nr_armdiv)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		if (div) {
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
+			if (calc <= rate && div < best)
+				best = div;
+		}
+	}
+
+	return parent / best;
+}
+
+static unsigned long s3c2443_armclk_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkcon0;
+	int val;
+
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
+	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+	clkcon0 &= armdivmask;
+	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return rate / armdiv[val];
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		if (div) {
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
+			if (calc <= rate && div < best) {
+				best = div;
+				val = ptr;
+			}
+		}
+	}
+
+	if (val >= 0) {
+		unsigned long clkcon0;
+
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= ~armdivmask;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
+
+	return (val == -1) ? -EINVAL : 0;
+}
+
+static struct clk clk_armdiv = {
+	.name		= "armdiv",
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.get_rate = s3c2443_armclk_getrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
+
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
+};
+
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
+
 /* usbhost
  *
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
@@ -308,6 +426,7 @@ static struct clk init_clocks[] = {
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
@@ -402,8 +521,7 @@ static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 
 /* EPLLCON compatible enough to get on/off information */
 
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
-						   fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
@@ -423,7 +541,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
 	pll = get_mpll(mpllcon, xtal);
 	clk_msysclk.clk.rate = pll;
 
-	fclk = pll / get_fdiv(clkdiv0);
+	fclk = clk_get_rate(&clk_armdiv);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
 	hclk /= s3c2443_get_hdiv(clkdiv0);
 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -458,6 +576,7 @@ static struct clk *clks[] __initdata = {
 	&clk_ext,
 	&clk_epll,
 	&clk_usb_bus,
+	&clk_armdiv,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -467,13 +586,19 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_epllref,
 	&clk_esysclk,
 	&clk_msysclk,
+	&clk_arm,
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       fdiv_fn get_fdiv)
+				       unsigned int *divs, int nr_divs,
+				       int divmask)
 {
 	int ptr;
 
+	armdiv = divs;
+	nr_armdiv = nr_divs;
+	armdivmask = divmask;
+
 	/* s3c2443 parents h and p clocks from prediv */
 	clk_h.parent = &clk_prediv;
 	clk_p.parent = &clk_prediv;
@@ -494,5 +619,5 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
-	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+	s3c2443_common_setup_clocks(get_mpll);
 }
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index ee8deef..33ecd0c 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -41,6 +41,8 @@
 
 enum s3c_cpu_type {
 	TYPE_ADCV1, /* S3C24XX */
+	TYPE_ADCV11, /* S3C2443 */
+	TYPE_ADCV12, /* S3C2416, S3C2450 */
 	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
 	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
 };
@@ -98,13 +100,17 @@ static inline void s3c_adc_select(struct adc_device *adc,
 
 	client->select_cb(client, 1);
 
-	con &= ~S3C2410_ADCCON_MUXMASK;
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+		con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
 	con &= ~S3C2410_ADCCON_STARTMASK;
 
 	if (!client->is_ts) {
 		if (cpu == TYPE_ADCV3)
 			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+			writel(client->channel & 0xf,
+						adc->regs + S3C2443_ADCMUX);
 		else
 			con |= S3C2410_ADCCON_SELMUX(client->channel);
 	}
@@ -293,13 +299,13 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 
 	client->nr_samples--;
 
-	if (cpu != TYPE_ADCV1) {
-		/* S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	} else {
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
 		data0 &= 0x3ff;
 		data1 &= 0x3ff;
+	} else {
+		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
 	}
 
 	if (client->convert_cb)
@@ -320,7 +326,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	}
 
 exit:
-	if (cpu != TYPE_ADCV1) {
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
 		/* Clear ADC interrupt */
 		writel(0, adc->regs + S3C64XX_ADCCLRINT);
 	}
@@ -332,6 +338,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct adc_device *adc;
 	struct resource *regs;
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned tmp;
 
@@ -394,10 +401,13 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	clk_enable(adc->clk);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
-		/* Enable 12-bit ADC resolution */
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
-	}
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	dev_info(dev, "attached adc driver\n");
@@ -464,6 +474,7 @@ static int s3c_adc_resume(struct device *dev)
 	struct platform_device *pdev = container_of(dev,
 			struct platform_device, dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned long tmp;
 
@@ -474,9 +485,13 @@ static int s3c_adc_resume(struct device *dev)
 	enable_irq(adc->irq);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
 	/* Enable 12-bit ADC resolution */
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	return 0;
@@ -492,6 +507,12 @@ static struct platform_device_id s3c_adc_driver_ids[] = {
 		.name           = "s3c24xx-adc",
 		.driver_data    = TYPE_ADCV1,
 	}, {
+		.name		= "s3c2443-adc",
+		.driver_data	= TYPE_ADCV11,
+	}, {
+		.name		= "s3c2416-adc",
+		.driver_data	= TYPE_ADCV12,
+	}, {
 		.name           = "s3c64xx-adc",
 		.driver_data    = TYPE_ADCV2,
 	}, {
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
index a281568..a927bee 100644
--- a/arch/arm/plat-samsung/include/plat/adc-core.h
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -20,7 +20,7 @@
 /* re-define device name depending on support. */
 static inline void s3c_adc_setname(char *name)
 {
-#ifdef CONFIG_SAMSUNG_DEV_ADC
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_adc.name = name;
 #endif
 }
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 54f370f..40fd7b6 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -25,7 +25,6 @@ extern unsigned long samsung_cpu_id;
 
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
-#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
 #define S3C64XX_CPU_MASK	0xFFFFF000
 
 #define S5P6440_CPU_ID		0x56440000
@@ -50,7 +49,8 @@ static inline int is_samsung_##name(void)	\
 }
 
 IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
@@ -69,7 +69,7 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
 # define soc_is_s3c64xx()	0
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index 035e8c3..7061210 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -20,6 +20,7 @@
 #define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
 #define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
 #define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
 #define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
 #define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
 #define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
@@ -33,6 +34,7 @@
 #define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
 #define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
 #define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2416_ADCCON_RESSEL		(1 << 3)
 #define S3C2410_ADCCON_STDBM		(1<<2)
 #define S3C2410_ADCCON_READ_START	(1<<1)
 #define S3C2410_ADCCON_ENABLE_START	(1<<0)
@@ -40,6 +42,7 @@
 
 
 /* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
 #define S3C2410_ADCTSC_YM_SEN		(1<<7)
 #define S3C2410_ADCTSC_YP_SEN		(1<<6)
 #define S3C2410_ADCTSC_XM_SEN		(1<<5)
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 4b2ac9a..7fae1a0 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -37,10 +37,11 @@ extern  int s3c2443_baseclk_add(void);
 struct clk;	/* some files don't need clk.h otherwise */
 
 typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
 
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       unsigned int *divs, int nr_divs,
+				       int divmask);
 
 extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
 extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b6be77a..8662518 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -318,6 +318,7 @@ static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
 	return S3C_GPIO_SPECIAL(con);
 }
 
+#ifdef CONFIG_PLAT_S3C24XX
 /*
  * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
  * @chip: The gpio chip that is being configured.
@@ -379,7 +380,9 @@ static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
 
 	return S3C_GPIO_SFN(con);
 }
+#endif
 
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
 static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
 				     unsigned int off, unsigned int cfg)
 {
@@ -417,6 +420,7 @@ static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
 
 	return 0;
 }
+#endif
 
 static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
 					   int nr_chips)
@@ -438,10 +442,12 @@ struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
 	.get_config	= samsung_gpio_getcfg_2bit,
 };
 
+#ifdef CONFIG_PLAT_S3C24XX
 static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
 	.set_config	= s3c24xx_gpio_setcfg_abank,
 	.get_config	= s3c24xx_gpio_getcfg_abank,
 };
+#endif
 
 static struct samsung_gpio_cfg exynos4_gpio_cfg = {
 	.set_pull	= exynos4_gpio_setpull,
@@ -450,6 +456,7 @@ static struct samsung_gpio_cfg exynos4_gpio_cfg = {
 	.get_config	= samsung_gpio_getcfg_4bit,
 };
 
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
 static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
 	.cfg_eint	= 0x3,
 	.set_config	= s5p64x0_gpio_setcfg_rbank,
@@ -457,6 +464,7 @@ static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
 	.set_pull	= samsung_gpio_setpull_updown,
 	.get_pull	= samsung_gpio_getpull_updown,
 };
+#endif
 
 static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
 	{
@@ -482,7 +490,14 @@ static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
 	}, {
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	},
+	}, {
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}
 };
 
 /*
@@ -682,6 +697,7 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
+#ifdef CONFIG_PLAT_S3C24XX
 /* The next set of routines are for the case of s3c24xx bank a */
 
 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
@@ -717,6 +733,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	local_irq_restore(flags);
 	return 0;
 }
+#endif
 
 /* The next set of routines are for the case of s5p64x0 bank r */
 
@@ -914,6 +931,10 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
 	struct gpio_chip *gc = &chip->chip;
 
 	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
 		if (!chip->config)
 			chip->config = &s3c24xx_gpiocfg_default;
 		if (!chip->pm)
@@ -2249,49 +2270,49 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 			.label	= "GPL2",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY0(0),
 			.ngpio	= EXYNOS4_GPIO_Y0_NR,
 			.label	= "GPY0",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY1(0),
 			.ngpio	= EXYNOS4_GPIO_Y1_NR,
 			.label	= "GPY1",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY2(0),
 			.ngpio	= EXYNOS4_GPIO_Y2_NR,
 			.label	= "GPY2",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY3(0),
 			.ngpio	= EXYNOS4_GPIO_Y3_NR,
 			.label	= "GPY3",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY4(0),
 			.ngpio	= EXYNOS4_GPIO_Y4_NR,
 			.label	= "GPY4",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY5(0),
 			.ngpio	= EXYNOS4_GPIO_Y5_NR,
 			.label	= "GPY5",
 		},
 	}, {
-		.config	= &samsung_gpio_cfgs[0],
+		.config	= &samsung_gpio_cfgs[8],
 		.chip	= {
 			.base	= EXYNOS4_GPY6(0),
 			.ngpio	= EXYNOS4_GPIO_Y6_NR,
@@ -2299,7 +2320,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 		},
 	}, {
 		.base	= (S5P_VA_GPIO2 + 0xC00),
-		.config	= &samsung_gpio_cfgs[3],
+		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(0),
 		.chip	= {
 			.base	= EXYNOS4_GPX0(0),
@@ -2309,7 +2330,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 		},
 	}, {
 		.base	= (S5P_VA_GPIO2 + 0xC20),
-		.config	= &samsung_gpio_cfgs[3],
+		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(8),
 		.chip	= {
 			.base	= EXYNOS4_GPX1(0),
@@ -2319,7 +2340,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 		},
 	}, {
 		.base	= (S5P_VA_GPIO2 + 0xC40),
-		.config	= &samsung_gpio_cfgs[3],
+		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(16),
 		.chip	= {
 			.base	= EXYNOS4_GPX2(0),
@@ -2329,7 +2350,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 		},
 	}, {
 		.base	= (S5P_VA_GPIO2 + 0xC60),
-		.config	= &samsung_gpio_cfgs[3],
+		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(24),
 		.chip	= {
 			.base	= EXYNOS4_GPX3(0),
@@ -2465,6 +2486,9 @@ static __init int samsung_gpiolib_init(void)
 		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
 		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
 #endif
+	} else {
+		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
+		return -ENODEV;
 	}
 
 	return 0;